- gestione log macchina con timer

- aggiornamento log macchina durante produzione pezzi

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.6.2")>
-<Assembly: AssemblyFileVersion("2.5.6.2")>
+<Assembly: AssemblyVersion("2.5.5.4")>
+<Assembly: AssemblyFileVersion("2.5.5.4")>

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.5.6.2")]
-[assembly: AssemblyFileVersion("2.5.6.2")]
+[assembly: AssemblyVersion("2.5.5.4")]
+[assembly: AssemblyFileVersion("2.5.5.4")]

EgtBEAMWALL.Supervisor/LeftPanel/LeftPanelVM.vb

@@ -40,7 +40,7 @@ Public Class LeftPanelVM
          Return m_SelChannel
       End Get
       Set(ByVal value As IdNameStruct)
-         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
+         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
          m_SelChannel = value
       End Set
    End Property
@@ -86,7 +86,7 @@ Public Class LeftPanelVM
          Return m_SelOPMode
       End Get
       Set(ByVal value As OPState)
-         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
+         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
          ' se MDI
          If value.Id = OPModes.Mdi Then
             ' mostro pagina comandi MDI
@@ -561,6 +561,8 @@ Public Class LeftPanelVM
       If CurrentMachine.Flow = FlowTypes.ONEBYONE Then
          MyMachGroupVM.UpdateProduceIsEnabledForAll()
       End If
+      ' aggiorno log macchina
+      Map.refMachineLogPageVM.UpdateMachineLogList(False)
    End Sub
 
 #End Region    ' DoneRawPart
@@ -800,6 +802,8 @@ Public Class LeftPanelVM
       Next
       SetDonePart(SelMachGroup, SelMachGroup.SelPart)
       Map.refProjectVM.SupervisorMachGroupPanelVM.SelectedMachGroup = SelMachGroup
+      ' aggiorno log macchina
+      Map.refMachineLogPageVM.UpdateMachineLogList(False)
    End Sub
 
    Public Sub SetDonePart(MachGroup As MyMachGroupVM, Part As PartVM)

EgtBEAMWALL.Supervisor/MDIPage/MDIPageVM.vb

@@ -163,7 +163,7 @@ Public Class MDIPageVM
    ''' </summary>
    Friend Sub SendMDI()
       If Not String.IsNullOrWhiteSpace(m_sMDICommand_Text) Then
-         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
+         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
       End If
    End Sub
 

EgtBEAMWALL.Supervisor/MachCommandMessagePanel/MachCommandMessagePanelVM.vb

@@ -427,11 +427,11 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Disconnect()
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
    End Sub
 
    Public Sub SetOPState(OpState As Integer)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
    End Sub
 
    Public ReadOnly Property Start_Command As ICommand
@@ -442,7 +442,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Start(ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.START))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.START))
    End Sub
 
    Public ReadOnly Property Stop_Command As ICommand
@@ -453,7 +453,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Stop](ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOP_))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOP_))
    End Sub
 
    Public ReadOnly Property Reset_Command As ICommand
@@ -464,7 +464,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Reset(ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.RESET))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.RESET))
       ' annullo stato di pronto ad essere lavorato di tutti i programmi
       If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then Map.refProjectVM.SupervisorMachGroupPanelVM.ResetAllMachGroups()
    End Sub
@@ -477,7 +477,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Step](ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STEP_))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STEP_))
    End Sub
 
    Public ReadOnly Property SetPoint_Command As ICommand
@@ -488,7 +488,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub SetPoint(ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
    End Sub
 
 
@@ -500,7 +500,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub DeleteAlarms(ByVal param As Object)
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
    End Sub
 
    Public Function GetVarPathByName(Name As String) As String

EgtBEAMWALL.Supervisor/MachManagingThread/MachManaging.vb

@@ -10,9 +10,6 @@ Imports EgtBEAMWALL.Supervisor.CommVar
 
 Public Class MachManaging
 
-   ' lock per aggiunta elemento a lista MachGroup
-   Private Shared Lock_CommandList As New Object
-
    Private m_bConnected As Boolean = False
    Public ReadOnly Property bConnected As Boolean
       Get
@@ -56,22 +53,6 @@ Public Class MachManaging
          Return m_CommandList
       End Get
    End Property
-   Friend Shared Sub AddToCommandList(value As ThreadCommand)
-      SyncLock Lock_CommandList
-         ' EgtOutLog("Inizio ciclo rimozioni")
-         For CommandIndex = m_CommandList.Count - 1 To 0 Step -1
-            Dim Command As ThreadCommand = m_CommandList(CommandIndex)
-            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.DONE Then
-               ' EgtOutLog("Inizio rimozione comando")
-               m_CommandList.Remove(Command)
-               ' EgtOutLog("Fine rimozione comando")
-            End If
-         Next
-         ' EgtOutLog("Fine ciclo rimozioni")
-         CommandList.Add(value)
-         ' EgtOutLog("Count dopo aggiunta: " & CommandList.Count)
-      End SyncLock
-   End Sub
 
    Private m_bStartPending As Boolean = False
    Public ReadOnly Property StartPending As Boolean
@@ -588,6 +569,8 @@ Public Class MachManaging
                      ' scrivo evento inizio MachGroup su DB
                      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachGroupStateLog(dtStart, nP_Prod, nP_Machgroup, nP_State, DbControllers.SupervisorId))
                   End If
+                  ' flag di aggiornamento log macchina
+                  Map.refMachineLogPageVM.UpdateMachineLogList(False)
                   ' attesa per essere sicuro che abbia scritto e riletto variabili
                   Threading.Thread.Sleep(300)
                ElseIf nP_State = PartState.END_ Then
@@ -657,7 +640,7 @@ Public Class MachManaging
 
                      ' se non impostata data start
                      If MachGroup.dtStartTime = DateTime.MinValue Then
-                        ' EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
+                        EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
                         Dim dtStart As DateTime = MachGroup.dtEndTime - TimeSpan.FromSeconds(60)
                         ' provo a recuperare tempo stimato
                         If MachGroup.nCALC_TIME > 0 Then
@@ -697,6 +680,8 @@ Public Class MachManaging
                         Map.refLeftPanelVM.PrintLabel(MachGroup, Part)
                      End If
                   End If
+                  ' flag di aggiornamento log macchina
+                  Map.refMachineLogPageVM.UpdateMachineLogList(False)
                   ' attesa per essere sicuro che abbia scritto e riletto variabili
                   Threading.Thread.Sleep(300)
                End If
@@ -741,7 +726,7 @@ Public Class MachManaging
    End Function
 
    Private Function SendNextProgram() As Boolean
-      ' EgtOutLog("Inizio SendNextProgram")
+      EgtOutLog("Inizio SendNextProgram")
       Dim bSent As Boolean = False
       If (CurrentMachine.NCType = NCTypes.TPA AndAlso Not m_bStartPending AndAlso Tpa.opState = MachineOperatingState.Pending) OrElse
          (CurrentMachine.NCType = NCTypes.NUM_FLEXIUM AndAlso Not Num_Flexium.bIsTransferActive) OrElse
@@ -749,20 +734,20 @@ Public Class MachManaging
          (CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT AndAlso Not Num_Axium_PCToolkit.bIsTransferActive) Then ' Or Tpa.opState = MachineOperatingState.Start) Then
          ' verifico se c'e' un programma da lanciare
          If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then
-            ' EgtOutLog("Start " & DateTime.Now())
+            EgtOutLog("Start " & DateTime.Now())
             Dim bMachGroupNotReady As Boolean = False
             SyncLock m_Lock_SendProgram
                For Each MyMachGroup As MyMachGroupVM In Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList
-                  ' EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
+                  EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
                   If Not MyMachGroup.bSentToMachine AndAlso (MyMachGroup.dtStartTime = DateTime.MinValue OrElse
                      (Map.refSupervisorManagerVM.CurrProd.nType = BWType.WALL AndAlso MyMachGroup.bResetWhileCutting)) Then
-                     ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
+                     EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
                      ' verifico se ricalcolo finito
                      If MyMachGroup.bReadyForMachining AndAlso If(CurrentMachine.NCType = NCTypes.NUM_FLEXIUM Or CurrentMachine.NCType = NCTypes.NUM_AXIUM_APSERVER OrElse CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT, Not MyMachGroup.bSendingToMachine, True) Then
-                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
+                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
                         ' lo lancio
                         bSent = SendProgram(MyMachGroup.CnFilePath(), MyMachGroup.Name)
-                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
+                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
                         Select Case CurrentMachine.NCType
                            Case NCTypes.TPA
                               MyMachGroup.SetSentToMachine(bSent)
@@ -774,7 +759,7 @@ Public Class MachManaging
                      Else
                         ' programma non ancora pronto, esco per attendere
                         bMachGroupNotReady = True
-                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
+                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
                         Exit For
                         'Return False
                      End If
@@ -782,7 +767,7 @@ Public Class MachManaging
                Next
             End SyncLock
             If bMachGroupNotReady Then Return False
-            ' EgtOutLog("End " & DateTime.Now())
+            EgtOutLog("End " & DateTime.Now())
          End If
       End If
       Return bSent
@@ -790,17 +775,10 @@ Public Class MachManaging
 
    Private Sub CommandList_CollectionChanged(sender As Object, e As NotifyCollectionChangedEventArgs)
       If Not IsNothing(e.NewItems) Then
-         ' EgtOutLog("Inizio ciclo esecuzione comandi")
-         Dim nCommandCount As Integer = e.NewItems.Count
-         For CommandIndex = 0 To nCommandCount - 1
-            Dim Command As ThreadCommand = e.NewItems(CommandIndex)
-            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.WAITING Then
-               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.PROCESSING)
-               ExecuteCommand(DirectCast(Command, ThreadCommand))
-               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.DONE)
-            End If
+         For Each Command In e.NewItems
+            ExecuteCommand(DirectCast(Command, ThreadCommand))
+            m_CommandList.Remove(Command)
          Next
-         ' EgtOutLog("Fine ciclo esecuzione di " & nCommandCount & " comandi")
       End If
    End Sub
 
@@ -1070,7 +1048,7 @@ Public Class MachManaging
             Num_Axium_APServer.StartTransfer()
             Return True
          Case NCTypes.NUM_AXIUM_PCTOOLKIT
-            ' EgtOutLog("Pre Download")
+            EgtOutLog("Pre Download")
             Dim nFileType As Integer = 0
             If Integer.TryParse(ProgramId, nFileType) AndAlso nFileType > 0 Then
                Num_Axium_PCToolkit.FileDownload(nFileType * 10, ProgramPath)

EgtBEAMWALL.Supervisor/MachManagingThread/MachManagingThread.vb

@@ -54,12 +54,6 @@ End Class
 
 Public Class ThreadCommand
 
-   Public Enum ProcessingStatuses
-      WAITING = 1
-      PROCESSING = 2
-      DONE = 3
-   End Enum
-
    Private m_CommandType As CommandTypes
    Public ReadOnly Property CommandType As CommandTypes
       Get
@@ -101,16 +95,6 @@ Public Class ThreadCommand
       End Get
    End Property
 
-   Private m_ProcessingStatus As ProcessingStatuses = ProcessingStatuses.WAITING
-   Public ReadOnly Property ProcessingStatus As ProcessingStatuses
-      Get
-         Return m_ProcessingStatus
-      End Get
-   End Property
-   Friend Sub SetProcessingStatus(value As ProcessingStatuses)
-      m_ProcessingStatus = value
-   End Sub
-
    Protected Sub New()
    End Sub
 

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageV.xaml

@@ -25,21 +25,21 @@
       </Grid>
 
       <StackPanel Orientation="Horizontal" Height="30">
-         <TextBlock Text="{Binding Entity_Msg}"
+         <TextBlock Text="Entità"
                     Style="{StaticResource Log_TextBlock}"/>
          <ComboBox ItemsSource="{Binding EntityTypeList}"
                    SelectedIndex="{Binding SelEntityType}"
                    Width="70"
                    Margin="0,0,2.5,0"
                    Style="{StaticResource PartParam_ComboBox}"/>
-         <TextBlock Text="{Binding Event_Msg}"
+         <TextBlock Text="Evento"
                     Style="{StaticResource Log_TextBlock}"/>
          <ComboBox ItemsSource="{Binding PartEventTypeList}"
                    SelectedIndex="{Binding SelPartEventType}"
                    Width="70"
                    Margin="0,0,2.5,0"
                    Style="{StaticResource PartParam_ComboBox}"/>
-         <TextBlock Text="{Binding Date_Msg}"
+         <TextBlock Text="Data"
                     Style="{StaticResource Log_TextBlock}"/>
          <ComboBox ItemsSource="{Binding DayTypeList}"
                    SelectedIndex="{Binding SelDayType}"
@@ -47,11 +47,11 @@
                    Margin="0,0,2.5,0"
                    Style="{StaticResource PartParam_ComboBox}"/>
          <StackPanel Orientation="Horizontal" Visibility="{Binding Date_Visibility}">
-            <TextBlock Text="{Binding From_Msg}"
+            <TextBlock Text="Dal"
                        Style="{StaticResource Log_TextBlock}"/>
             <DatePicker SelectedDate="{Binding dtStartDate}"
                         Style="{StaticResource Log_DatePicker}"/>
-            <TextBlock Text="{Binding To_Msg}"
+            <TextBlock Text="Al"
                        Style="{StaticResource Log_TextBlock}"/>
             <DatePicker SelectedDate="{Binding dtEndDate}"
                         Style="{StaticResource Log_DatePicker}"/>

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageVM.vb

@@ -9,6 +9,10 @@ Imports EgtBEAMWALL.Core.MachLog
 Public Class MachineLogPageVM
    Inherits VMBase
 
+   Private m_Lock_LogList As New Object
+
+   Private m_MachineLog_Timer As New DispatcherTimer
+
    Private Enum DayTypes As Integer
       TODAY = 0
       YESTERDAY = 1
@@ -68,7 +72,7 @@ Public Class MachineLogPageVM
       End Set
    End Property
 
-   Private m_PartEventTypeList As New List(Of String)({"", EgtMsg(62527), EgtMsg(62528)})
+   Private m_PartEventTypeList As New List(Of String)({"", "Inizio", "Fine"})
    Public ReadOnly Property PartEventTypeList As List(Of String)
       Get
          Return m_PartEventTypeList
@@ -87,7 +91,7 @@ Public Class MachineLogPageVM
       End Set
    End Property
 
-   Private m_EntityTypeList As New List(Of String)({"", EgtMsg(62525), EgtMsg(62526)})
+   Private m_EntityTypeList As New List(Of String)({"", "Pezzo", "Barra"})
    Public ReadOnly Property EntityTypeList As List(Of String)
       Get
          Return m_EntityTypeList
@@ -106,7 +110,7 @@ Public Class MachineLogPageVM
       End Set
    End Property
 
-   Private m_DayTypeList As New List(Of String)({EgtMsg(62529), EgtMsg(62530), EgtMsg(62531)})
+   Private m_DayTypeList As New List(Of String)({"Oggi", "Ieri", "Periodo"})
    Public ReadOnly Property DayTypeList As List(Of String)
       Get
          Return m_DayTypeList
@@ -131,7 +135,7 @@ Public Class MachineLogPageVM
          End If
          NotifyPropertyChanged(NameOf(Date_Visibility))
          ' aggiorno lista da Db
-         UpdateMachineLogList()
+         UpdateMachineLogList(True)
       End Set
    End Property
 
@@ -145,7 +149,7 @@ Public Class MachineLogPageVM
          Dim lStartDate As Long = m_dtStartDate.ToFileTimeUtc()
          WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_STARTDATE, lStartDate.ToString())
          ' aggiorno lista da Db
-         UpdateMachineLogList()
+         UpdateMachineLogList(True)
       End Set
    End Property
 
@@ -159,7 +163,7 @@ Public Class MachineLogPageVM
          Dim lEndDate As Long = m_dtEndDate.ToFileTimeUtc()
          WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_ENDDATE, lEndDate.ToString())
          ' aggiorno lista da Db
-         UpdateMachineLogList()
+         UpdateMachineLogList(True)
       End Set
    End Property
 
@@ -223,35 +227,6 @@ Public Class MachineLogPageVM
       End Get
    End Property
 
-   Public ReadOnly Property Entity_Msg As String
-      Get
-         Return EgtMsg(62520)
-      End Get
-   End Property
-
-   Public ReadOnly Property Event_Msg As String
-      Get
-         Return EgtMsg(62521)
-      End Get
-   End Property
-
-   Public ReadOnly Property Date_Msg As String
-      Get
-         Return EgtMsg(62522)
-      End Get
-   End Property
-
-   Public ReadOnly Property From_Msg As String
-      Get
-         Return EgtMsg(62523)
-      End Get
-   End Property
-
-   Public ReadOnly Property To_Msg As String
-      Get
-         Return EgtMsg(62524)
-      End Get
-   End Property
 
 #End Region    ' Messages
 
@@ -292,6 +267,9 @@ Public Class MachineLogPageVM
             m_dtEndDate = If(lEndDate > 0, DateTime.FromFileTimeUtc(lEndDate), DateTime.Today)
             m_Date_Visibility = Visibility.Visible
       End Select
+      m_MachineLog_Timer.Interval = TimeSpan.FromMilliseconds(100)
+      AddHandler m_MachineLog_Timer.Tick, AddressOf MachineLog_Timer_Tick
+      m_MachineLog_Timer.Start()
    End Sub
 
 #End Region    ' CONSTRUCTORS
@@ -334,21 +312,69 @@ Public Class MachineLogPageVM
          m_colMachineLog_Description.ColumnVisibility = Visibility.Collapsed
          m_colMachineLog_SupervisorId.ColumnVisibility = Visibility.Collapsed
       End If
-      UpdateMachineLogList()
+      UpdateMachineLogList(True)
       m_MachineLogList_View = CollectionViewSource.GetDefaultView(m_MachineLogList)
       m_MachineLogList_View.Filter = AddressOf MachineLogFilter
    End Sub
 
-   Friend Sub UpdateMachineLogList()
+   ' indice di aggiornamento della lista rispetto a Db
+   Private m_nUpdateIndex As Integer
+   ' indice di ricaricamento completo della lista dal Db
+   Private m_nRefreshIndex As Integer
+   ' indice dell'ultimo update/refresh
+   Private m_nLastLogUpdate As Integer
+
+   Friend Sub UpdateMachineLogList(bRefresh As Boolean)
+      Dim nMaxIndex As Integer = Math.Max(m_nUpdateIndex, m_nRefreshIndex)
+      If bRefresh Then
+         m_nRefreshIndex = nMaxIndex + 1
+      Else
+         m_nUpdateIndex = nMaxIndex + 1
+      End If
+   End Sub
+
+   Private Sub MachineLog_Timer_Tick(sender As Object, e As EventArgs)
+      SyncLock m_Lock_LogList
+         Dim nRefresh As Integer = m_nRefreshIndex
+         Dim nUpdate As Integer = m_nUpdateIndex
+         If nRefresh > m_nLastLogUpdate Then
+            m_nLastLogUpdate = nRefresh
+            UpdateFromDb(True)
+         ElseIf nUpdate > m_nLastLogUpdate Then
+            m_nLastLogUpdate = nUpdate
+            UpdateFromDb(False)
+         End If
+      End SyncLock
+   End Sub
+
+   Friend Sub UpdateFromDb(bRefresh As Boolean)
       'm_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Now - TimeSpan.FromDays(300), DateTime.Now).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+      Dim DbList As List(Of LogEvent)
       Select Case m_SelDayType
-         Case DayTypes.TODAY
-            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today, DateTime.Today + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
-         Case DayTypes.YESTERDAY
-            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today - TimeSpan.FromDays(1), DateTime.Today).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
          Case DayTypes.PERIOD
-            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(m_dtStartDate, m_dtEndDate + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+            DbList = DbControllers.m_LogMachineController.GetCoreDesc(m_dtStartDate, m_dtEndDate + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList()
+         Case DayTypes.YESTERDAY
+            DbList = DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today - TimeSpan.FromDays(1), DateTime.Today).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList()
+         Case Else      ' DayTypes.TODAY
+            DbList = DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today, DateTime.Today + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList()
       End Select
+      If bRefresh OrElse m_MachineLogList.Count < 1 Then
+         m_MachineLogList = New ObservableCollection(Of LogEvent)(DbList)
+      Else
+         ' cerco in lista Db ultimo elemento della mia lista
+         Dim LastItem As LogEvent = m_MachineLogList(0)
+         Dim CommonItem As LogEvent = DbList.FirstOrDefault(Function(x) x.EventDateTime = LastItem.EventDateTime AndAlso x.EventType = LastItem.EventType AndAlso x.SupervisorId = LastItem.SupervisorId AndAlso x.Value = LastItem.Value)
+         Dim nCommonItemIndex As Integer
+         If Not IsNothing(CommonItem) Then
+            nCommonItemIndex = DbList.IndexOf(CommonItem)
+         End If
+         ' aggiorno i successivi
+         If nCommonItemIndex >= 0 Then
+            For Index = nCommonItemIndex - 1 To 0 Step -1
+               m_MachineLogList.Insert(0, DbList(Index))
+            Next
+         End If
+      End If
       NotifyPropertyChanged(NameOf(MachineLogList))
       m_MachineLogList_View = CollectionViewSource.GetDefaultView(m_MachineLogList)
       m_MachineLogList_View.Filter = AddressOf MachineLogFilter
@@ -376,7 +402,7 @@ Public Class MachineLogPageVM
    ''' Execute the Open.  This method is invoked by the OpenCommand.
    ''' </summary>
    Friend Sub Refresh()
-      UpdateMachineLogList()
+      UpdateMachineLogList(False)
    End Sub
 
 #End Region ' Refresh

EgtBEAMWALL.Supervisor/MainMenu/MainMenuVM.vb

@@ -277,31 +277,31 @@ Public Class MainMenuVM
 
    Private Function InitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 
    Private Function InitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -248,8 +248,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2506, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2506, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2505, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.Supervisor/MainWindow/MainWindowVM.vb

@@ -234,7 +234,7 @@ Public Class MainWindowVM
          Return
       End If
       ' disconnetto comunicazione con macchina
-      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
       ' termino thread di comunicazione con Db ed altri programmi
       ViewerOptimizerCommThread.StopThread()
       ' Verifico modifica parametri in Configurazione e chiedo il salvataggio

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.6.2")>
-<Assembly: AssemblyFileVersion("2.5.6.2")>
+<Assembly: AssemblyVersion("2.5.5.4")>
+<Assembly: AssemblyFileVersion("2.5.5.4")>

EgtBEAMWALL.Supervisor/Utility/LogEvent.vb

@@ -1,5 +1,4 @@
-Imports EgtUILib
-Imports EgtWPFLib5
+Imports EgtWPFLib5
 Imports EgtBEAMWALL.Core
 
 Public Class LogEvent
@@ -78,9 +77,9 @@ Public Class LogEvent
       Get
          Select Case m_Status
             Case 1
-               Return EgtMsg(62527)
+               Return "Inizio"
             Case 2
-               Return EgtMsg(62528)
+               Return "Fine"
             Case Else
                Return ""
          End Select

EgtBEAMWALL.Supervisor/VariablesList/VariablesListVM.vb

@@ -64,7 +64,7 @@ Public Class Variable
          Return CommVar.sValue
       End Get
       Set(value As String)
-         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
+         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
          NotifyPropertyChanged(NameOf(sValue))
       End Set
    End Property

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLFeatureVM.vb

@@ -120,17 +120,9 @@ Public Class BTLFeatureVM
       End Get
       Set(value As String)
          Dim nTemp As Integer = 0
-         If Integer.TryParse(value, nTemp) Then
-            If EgtSetInfo(nFeatureId, BTL_FTR_PRIORITY, nTemp) Then
-               m_BTLFeatureM.nPriority = nTemp
-               ' setto feature da ricalcolare
-               ResetCalcFeature()
-               ' se in View
-               If Map.refMainMenuVM.SelPage = Pages.VIEW Then
-                  ' imposto modificato per copie
-                  EgtDuploSetModified(m_BTLPartM.nPartId)
-               End If
-            End If
+         If Integer.TryParse(value, nTemp) Then 
+            m_BTLFeatureM.nPriority = nTemp
+            EgtSetInfo( nFeatureId, BTL_FTR_PRIORITY, m_BTLFeatureM.nPriority)
          End If
          NotifyPropertyChanged(NameOf(sPriority))
       End Set

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLPartVM.vb

@@ -2164,7 +2164,7 @@ Public Class BTLPartVM
             ' imposto path disegno da mostrare in BottomPanel
             Dim SelPBTLParam As BTLParamVM = Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.SelPBTLParam
             If Not IsNothing(SelPBTLParam) Then Map.refBottomPanelVM.SetCurrDraw(SelPBTLParam.sDrawPath)
-         Case NameOf(sender.bDO), NameOf(sender.sPriority)
+         Case NameOf(sender.bDO)
             NotifyPropertyChanged(NameOf(bDOALL))
             ' setto pezzo da ricalcolare
             'ResetCalcTotalPart()

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerVM.vb

@@ -29,7 +29,7 @@ Public Class FeatureManagerVM
 
    Public ReadOnly Property Priority_Visibility As Visibility
       Get
-         Return If(CurrentMachine.nType = Core.ConstBeam.MachineType.WALL AndAlso CurrentMachine.bIsEnabledPriority, Visibility.Visible, Visibility.Collapsed)
+         Return if(CurrentMachine.nType = Core.ConstBeam.MachineType.WALL, Visibility.Visible, Visibility.Collapsed)
       End Get
    End Property
 

EgtBEAMWALL.ViewerOptimizer/ItemParamList/FeatureInPartInRawPartListVM.vb

@@ -62,7 +62,7 @@ Public Class FeatureInPartInRawPartListVM
 
    Friend Sub UpdateColumns(nMachType As MachineType)
       If Not IsNothing(m_colFeatureInPartInRawPart_Priority) Then
-         m_colFeatureInPartInRawPart_Priority.Visible = (nMachType = MachineType.WALL AndAlso CurrentMachine.bIsEnabledPriority)
+         m_colFeatureInPartInRawPart_Priority.Visible = (nMachType=MachineType.WALL)
       End If
    End Sub
 

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowM.vb

@@ -235,8 +235,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2506, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2506, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2505, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & VWOPTGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.ViewerOptimizer/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.6.2")>
-<Assembly: AssemblyFileVersion("2.5.6.2")>
+<Assembly: AssemblyVersion("2.5.5.4")>
+<Assembly: AssemblyFileVersion("2.5.5.4")>

EgtBEAMWALL.ViewerOptimizer/Utility/CurrentMachine.vb

@@ -87,13 +87,6 @@ Public Module CurrentMachine
          Return m_dMinOffset
       End Get
    End Property
-   ' Attivazione Priority pareti
-   Private m_bIsEnabledPriority As Boolean = 0
-   Public ReadOnly Property bIsEnabledPriority As Boolean
-      Get
-         Return m_bIsEnabledPriority
-      End Get
-   End Property
 
 #Region "Proprietà che leggono e scrivono i valori anche da o su file ini"
 
@@ -307,11 +300,6 @@ Public Module CurrentMachine
             End Select
             EgtLuaGetGlobNumVar("GWD.MIN_HEIGHT", m_dMinRawH)
             EgtLuaGetGlobNumVar("GWD.MAX_HEIGHT", m_dMaxRawH)
-            If EgtLuaGetGlobNumVar("GWD.BTL_PRIORITY", nTemp) Then
-               m_bIsEnabledPriority = nTemp > 0
-            Else
-               m_bIsEnabledPriority = False
-            End If
          Else
             m_nViewDir = VT.ISO_SW
             m_OrigCorner = MCH_CR.BR
@@ -320,7 +308,6 @@ Public Module CurrentMachine
             m_NestingCorner = MCH_CR.BR
             m_dMinRawH = 5
             m_dMaxRawH = 500
-            m_bIsEnabledPriority = False
          End If
          ' Cancello tavola globale
          EgtLuaResetGlobVar("GWD")