Migliorata lettura dato Sovratavola

- ricompilazione per nuova versione (nelle dll corretto problema rallentamenti iniziali e finali non più eseguiti).

CAM/CamAuto.vb

@@ -101,6 +101,74 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -29,6 +30,10 @@ Friend Module CSVFile
       Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -59,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -79,6 +85,9 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
          EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -139,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -181,6 +192,8 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -208,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -229,19 +243,44 @@ Friend Module CSVFile
             Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
             Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,6 +28,10 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFaimily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFaimily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -480,7 +626,7 @@ Public Class CSVPage
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -490,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -519,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -595,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -607,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -630,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml.vb

@@ -108,6 +108,8 @@ Public Class CadCutPageUC
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -142,6 +144,8 @@ Public Class CadCutPageUC
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -168,6 +172,8 @@ Public Class CadCutPageUC
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -176,6 +182,8 @@ Public Class CadCutPageUC
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -198,6 +206,8 @@ Public Class CadCutPageUC
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False

CadCuts/MoveRawPartPage.xaml.vb

@@ -28,6 +28,8 @@ Public Class MoveRawPartPage
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
 
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
@@ -230,16 +232,48 @@ Public Class MoveRawPartPage
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nId, nStat)
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
+               ' Deseleziono tutto e abilito la selezione del pezzo corrente
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
                If Not m_bByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, m_MainWindow.GetMachIniFile())
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -249,10 +283,18 @@ Public Class MoveRawPartPage
                      ' Reset eventuale messaggio
                      m_CurrProjPage.ClearMessage()
                   Else
+                     ' nascondo la visualizzazione delle ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento
-                     m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     If VacuumCups.bOverWeight Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4)) 'Pezzo troppo pesante : non si può muovere
+                     ElseIf VacuumCups.bExtraStroke Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5)) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     End If
                   End If
                End If
             End If
@@ -261,8 +303,52 @@ Public Class MoveRawPartPage
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+      End If
+
    End Sub
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
+#Region "Move Up/Down/Left/Right"
+
    Private Sub UpBtn_Click(sender As Object, e As RoutedEventArgs) Handles UpBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -285,9 +371,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -322,9 +414,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -342,9 +440,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -361,9 +465,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(-m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -373,6 +483,77 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region   'Move Up/Down/Left/Right
+
+   ' verifica che la poszione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+
+#Region "Rotate CounterClockWise/ClockWise"
+
    Private Sub RotateCounterClockwiseBtn_Click(sender As Object, e As RoutedEventArgs) Handles RotateCounterClockwiseBtn.Click
       ' Solo movimento con ventose
       If m_bByHand Then Return
@@ -380,14 +561,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -404,14 +595,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = -m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -421,6 +622,44 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region  ' Rotate CounterClockWise/ClockWise
+
+   ' verifica che la rotazione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -658,6 +897,17 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Torno alla fase precedente
@@ -669,6 +919,17 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Passo alla pagina delle spezzature

CadCuts/NestPageUC.xaml

@@ -99,23 +99,29 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
-
-            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                     <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,72 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.3*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+
+            </Grid.RowDefinitions>
+
+            <!--Messaggio: Seleziona il numero di pezzi-->
+            <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+                <TextBlock Name="NbrOfPartsMsg"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            </UniformGrid>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+
+                </Grid.ColumnDefinitions>
+
+                <!--ultimo progetto-->
+                <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--nuovo progetto-->
+                <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Select all" Visibility="Collapsed">
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--apri folder progetti-->
+                <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Cancel">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = "Selection parts"
+      NbrOfPartsMsg.Text = "Number of parts"
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SplitPageUC.xaml.vb

@@ -410,25 +410,38 @@ Public Class SplitPageUC
       VerifyHomogenousMachining(ItemList)
 
       ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(m_ItemList.IndexOf(x), m_ItemList.IndexOf(y)))
-      ' verifico che siano contigui
-      Dim bContigus As Boolean = False
-      Dim OrdIndex = 0
-      OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
-      Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
-      If MachiningLsBx.SelectedItems.Count = 1 Then
-         bContigus = True
+
+      If VerifyContinuity(ItemList) Then
+         MoveUpBtn.IsEnabled = True
+         MoveDownBtn.IsEnabled = True
       Else
-         For Each Item As NameIdLsBxItem In ItemList
-            If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
-               bContigus = True
-            End If
-         Next
-      End If
-      ' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
-      If Not bContigus Then
-         ItemList.Remove(LastSel)
-         MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+         MoveUpBtn.IsEnabled = False
+         MoveDownBtn.IsEnabled = False
       End If
+
+      GetCurrSelection()
+
+      '' verifico che siano contigui
+      'Dim bContigus As Boolean = False
+      'Dim OrdIndex = 0
+      'OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
+      '' recupero l'indice dell'ultimo elemento selezionato
+      'Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
+      'If MachiningLsBx.SelectedItems.Count = 1 Then
+      '   bContigus = True
+      'Else
+      '   For Each Item As NameIdLsBxItem In ItemList
+      '      If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
+      '         bContigus = True
+      '      End If
+      '   Next
+      'End If
+      '' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
+      'If Not bContigus Then
+      '   ItemList.Remove(LastSel)
+      '   MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+      'End If
+
       ' resetto marcatura lavorazioni
       If m_CurrFirstInd > -1 Then
          For Index As Integer = m_CurrFirstInd To m_CurrLastInd
@@ -497,6 +510,9 @@ Public Class SplitPageUC
    Private Sub OnOffBtn_Click(sender As Object, e As RoutedEventArgs) Handles OnOffBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_bEnabled Then
             m_MachiningList(nI).m_bEnabled = False
@@ -557,6 +573,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Provo ad entrambi gli estremi
          Dim bModif As Boolean = AdjustBothCuts(nI)
@@ -582,6 +601,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustEndCut(nI) Then
@@ -601,6 +623,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustStartCut(nI) Then
@@ -729,6 +754,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -827,6 +855,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -966,6 +997,8 @@ Public Class SplitPageUC
    Private Sub ModifStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifStartBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUsal As Double = 0
 
@@ -980,6 +1013,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -993,7 +1029,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
@@ -1045,16 +1081,16 @@ Public Class SplitPageUC
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
-            If bFirstInd Then
+            If bFirstMill Then
                ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
                dUsal = ValWnd.GetVal()
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1071,7 +1107,7 @@ Public Class SplitPageUC
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim bOriginalIsLeadIn As Boolean = True
                Dim dOriginalAddLen As Double = 0
@@ -1086,7 +1122,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LIPERP, nOriginalPerpDist)
                EgtGetMachiningParam(MCH_MP.LEADINTYPE, nOriginalLeadInType)
                ' Dialogo richiesta valori
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
                ModifStartWnd.SetElongation(dOriginalAddLen)
                ModifStartWnd.SetHole(bOriginalLiHole)
                ModifStartWnd.SetLiTangDist(nOriginalTangDist)
@@ -1101,7 +1137,7 @@ Public Class SplitPageUC
                nWJPerpDist = ModifStartWnd.GetLiPerpDist()
                nWJLeadInType = ModifStartWnd.GetLeadInType().Id
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstWJ = False
             End If
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1132,6 +1168,8 @@ Public Class SplitPageUC
    Private Sub ModifEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifEndBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUeal As Double = 0
 
@@ -1145,6 +1183,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -1158,7 +1199,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
@@ -1208,13 +1249,13 @@ Public Class SplitPageUC
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstMill Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
             ' Modifica della lavorazione
@@ -1228,7 +1269,7 @@ Public Class SplitPageUC
             ' se altrimenti getto d'acqua
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim dAddLen As Double = 0
                Dim LeadOutType As Integer = 0
@@ -1240,7 +1281,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LOTANG, nTangDist)
                EgtGetMachiningParam(MCH_MP.LOPERP, nPerpDist)
                ' Dialogo richiesta valore
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
                ModifStartWnd.SetElongation(dAddLen)
                ModifStartWnd.SetLeadOutType(LeadOutType)
                ModifStartWnd.SetLoTangDist(nTangDist)
@@ -1250,7 +1291,7 @@ Public Class SplitPageUC
                WJLeadOutType = ModifStartWnd.GetLeadOutType().Id
                nWJTangDist = ModifStartWnd.GetLoTangDist()
                nWJPerpDist = ModifStartWnd.GetLoPerpDist()
-               bFirstInd = False
+               bFirstWJ = False
             End If
 
             ' Modifica della lavorazione
@@ -1278,6 +1319,9 @@ Public Class SplitPageUC
    Private Sub InvertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InvertBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
          If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
@@ -1323,6 +1367,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          If GetPause(nOperId) Then
@@ -1645,6 +1692,37 @@ Public Class SplitPageUC
       End If
    End Sub
 
+   Private Function VerifyContinuity(ItemList As List(Of NameIdLsBxItem)) As Boolean
+      If ItemList.Count < 2 Then Return True
+      Dim bContigus As Boolean = False
+      For Index As Integer = 0 To ItemList.Count - 2
+         If ItemList(Index).Ind = ItemList(Index + 1).Ind + 1 Or ItemList(Index).Ind = ItemList(Index + 1).Ind - 1 Then
+            bContigus = True
+         Else
+            bContigus = False
+            Exit For
+         End If
+      Next
+      Return bContigus
+   End Function
+
+   Private Sub GetCurrSelection()
+      For Each Item As NameIdLsBxItem In m_ItemList
+         Item.IsSelected = False
+      Next
+      ' recupero il numero di elementi selezionati
+      Dim nCount As Integer = MachiningLsBx.SelectedItems.Count
+      For Index As Integer = 0 To nCount - 1
+         Dim Local_ItemTemplate As NameIdLsBxItem = MachiningLsBx.SelectedItems(Index)
+         For Each Item As NameIdLsBxItem In m_ItemList
+            If Item.Ind = Local_ItemTemplate.Ind Then
+               Item.IsSelected = True
+               Exit For
+            End If
+         Next
+      Next
+   End Sub
+
    Private Sub VisibilityButtonFromMachinig(ByVal Type As Integer)
       If Type <> MCH_OY.SAWING Then
          CutBtn.Visibility = Visibility.Hidden
@@ -1721,6 +1799,15 @@ Public Class SplitPageUC
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv( m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -1775,6 +1862,36 @@ Public Class SplitPageUC
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection( ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos( 30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin( 30 * Math.PI / 180)
@@ -1854,7 +1971,10 @@ Public Class SplitPageUC
       EgtDisableModified()
       ' cancello evidenziazione
       If m_CurrFirstInd >= 0 Then
-         For Index As integer = m_CurrFirstInd To m_CurrLastInd
+         For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+            If Not m_ItemList(Index).IsSelected Then
+               Continue For
+            End If
             MarkMachining(m_ItemList(Index).Ind, False)
          Next
          m_CurrFirstInd = -1
@@ -1913,6 +2033,8 @@ Public Class SplitPageUC
       Private m_bIsActive As Boolean
       Private m_nType As Integer
 
+      Private m_IsSelected As Boolean
+
       Public Property Ind As Integer
          Get
             Return m_nInd
@@ -1955,6 +2077,15 @@ Public Class SplitPageUC
          End Set
       End Property
 
+      Public Property IsSelected As Boolean
+         Get
+            Return m_IsSelected
+         End Get
+         Set(value As Boolean)
+            m_IsSelected = value
+         End Set
+      End Property
+
       Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer)
          Me.m_sName = Name
          Me.m_nInd = Ind

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -10,7 +11,22 @@ Module VacuumCups
    Private m_dPreferredRot As Double = 0
    Private m_dPrefVertRotXMinus As Double = 0
    Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -50,6 +66,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -66,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -78,7 +110,9 @@ Module VacuumCups
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
       ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -165,6 +199,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -187,6 +233,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -266,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -294,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -368,6 +417,23 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
       ' Recupero l'area della tavola
       Dim b3Tab As New BBox3d
       EgtGetTableArea(1, b3Tab)
@@ -383,13 +449,24 @@ Module VacuumCups
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
-         If Math.Abs( dRotAngDeg - 90) < 45  Or  Math.Abs( dRotAngDeg - 270) < 45 Then
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+            ' se l'orientamento è verticale
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
-            else
+            Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
-         End If 
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
          While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
             dRotAngDeg -= dAngDelta
@@ -446,11 +523,55 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
+      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -471,6 +592,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -94,6 +94,8 @@ Module ConstGen
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
    Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
    Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -147,6 +149,9 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -182,6 +187,8 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -297,6 +304,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

Constants/ConstIni.vb

@@ -46,6 +46,10 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -148,7 +152,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
-   Public Const K_DRAG_RETTANGLE As String = "DragRettangle"
+   Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

Constants/ConstMachIni.vb

@@ -228,6 +228,10 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -290,5 +294,6 @@
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
    Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/FlatteningCut.xaml.vb

@@ -644,7 +644,8 @@ Public Class FlatteningCut
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
       Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' EgtSetName(nLayerId, NAME_OUTLOOP)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0

DrawImport/DrawPageUC.xaml.vb

@@ -882,7 +882,7 @@ Public Class DrawPageUC
 
    ' permette di inserire più di un part
    Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
-      
+
       Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
 
       ' Imposto il contesto corrente
@@ -893,6 +893,9 @@ Public Class DrawPageUC
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(DrawScene.GetCtx())
@@ -1040,6 +1043,11 @@ Public Class DrawPageUC
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -1054,7 +1062,13 @@ Public Class DrawPageUC
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
 
                ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------

DrawImport/ImportPageUC.xaml.vb

@@ -808,6 +808,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -817,26 +821,53 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -845,7 +876,7 @@ Public Class ImportPageUC
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
@@ -868,26 +899,26 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
@@ -907,7 +938,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

Machine/CurrentMachine.vb

@@ -752,6 +752,7 @@ Public Class CurrentMachine
          End Select
       End Get
       Set(value As Double)
+         Dim dValue As Double = 0
          Select Case GetCurrentTable()
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
@@ -760,14 +761,24 @@ Public Class CurrentMachine
                   m_dTab3AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
                End If
-            Case 2
+                  Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
                   m_dTab2AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, value)
+                  End If
                End If
             Case Else
                If Math.Abs(value - m_dAdditionalTable) > EPS_SMALL And
@@ -776,6 +787,11 @@ Public Class CurrentMachine
                   m_dAdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, value)
+                  End If
                End If
          End Select
       End Set

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -571,6 +571,10 @@ Class MainWindow
       TestOff()
       ' disabilito DragRettangle
       DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -628,6 +632,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -682,6 +688,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -735,6 +743,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -758,8 +768,8 @@ Class MainWindow
             m_ActivePage = Pages.FrameCut
          Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.CSV
             ' Pages.Simulation: quando sono nella simulazione devo uscire dalla pagina
-            CadCutBtn.IsChecked = True
-            FrameCutBtn.IsChecked = False
+            CadCutBtn.IsChecked = False
+            FrameCutBtn.IsChecked = True
          Case Pages.FrameCut
             FrameCutBtn.IsChecked = True
          Case Pages.Machine
@@ -789,6 +799,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -838,6 +850,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1144,10 +1158,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      ' DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1905,4 +1924,17 @@ Class MainWindow
 
    End Sub
 
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
+   End Sub
+
 End Class

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.2.3")>
-<Assembly: AssemblyFileVersion("2.4.2.3")>
+<Assembly: AssemblyVersion("2.4.5.4")>
+<Assembly: AssemblyFileVersion("2.4.5.4")>

OmagCUT.vbproj

@@ -166,6 +166,9 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
+      <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
@@ -405,6 +408,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -1242,6 +1249,18 @@
     <Resource Include="Resources\Spiral.png" />
     <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -46,6 +46,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>
@@ -106,6 +107,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -116,6 +116,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>
@@ -174,6 +175,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

Project/CurrentProjectPageUC.xaml.vb

@@ -180,42 +180,12 @@ Public Class CurrentProjectPageUC
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
 
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-         ' apro la finstra di selezione di avvio del programma
-         'StartProgram()
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-
-         '' Se richiesto, carico ultimo progetto
-         'Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         'If bAutoLoadLast Then
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-         '   If Not LoadProject(sPath, False) Then
-         '      NewProject()
-         '   End If
-         '   EgtResetModified()
-         '   'Altrimenti ne imposto uno nuovo
-         'Else
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   NewProject()
-         'End If
-
          ' creo nuovo progetto
          m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
 
          ' Nascondo progress per fotografia
          PhotoProgress.Visibility = Windows.Visibility.Hidden
-         ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-            m_MainWindow.CadCutBtn.IsChecked = True
-         Else
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-            m_MainWindow.FrameCutBtn.IsChecked = True
-         End If
 
       Else
          EgtSetCurrentContext(CurrentProjectScene.GetCtx())
@@ -274,8 +244,10 @@ Public Class CurrentProjectPageUC
          m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
          m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
          m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+         ' inizializzo gli oggetti della pagina (non passo dalla funzione Load!)
+         m_MainWindow.m_CadCutPageUC.m_ProjectMgr.SetReference()
 
-      ' seleziono il file dalla lista della finestra (= 4) 
+         ' seleziono il file dalla lista della finestra (= 4) 
       ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.SelectedProject Then
          NewProject()
          Dim sCurrDir As String = Path.GetDirectoryName(MyStartLancherWD.SelPath)
@@ -304,6 +276,21 @@ Public Class CurrentProjectPageUC
          End If
       End If
 
+      ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
+      If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
+         ' Carico sottopagina opportuna
+         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+            m_MainWindow.CadCutBtn.IsChecked = True
+         Else
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
+
+
    End Sub
 
    ' questo metodo è direttamente richiamato in caso di selezione della regione sinistra della pagina
@@ -521,6 +508,20 @@ Public Class CurrentProjectPageUC
       UpdateHeightTxBx()
       ' aggiorno materiale
       m_MainWindow.m_CurrentMachine.SetCurrMatByName(GetProjectMaterial())
+      ' aggiorno altezza sovaratavola
+      If GetPrivateProfileInt(S_GENERAL, "AdditionalTableByProj", 0, m_sIniFile) = 1 Then
+         ' leggo il valore OrigiAdditionalTable
+         Dim dValue As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
+         Select Case GetCurrentTable()
+            Case 3
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+            Case 2
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+            Case Else
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+         End Select
+         m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
+      End If
       ' forzo visualizzazione eventuali dati su aree
       SetAreasStatus( True)
       ' Dichiaro progetto non modificato

Project/ProjectMgrUC.xaml.vb

@@ -34,9 +34,7 @@ Public Class ProjectMgrUC
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Impostazioni
-      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
-      m_CurrMachine = m_MainWindow.m_CurrentMachine
-      m_CurrNcComm = m_MainWindow.m_CNCommunication
+      SetReference()
 
       ' Se richiesto carico finestra per VeinMatching e ultimo intarsio
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) And
@@ -55,6 +53,12 @@ Public Class ProjectMgrUC
       End If
    End Sub
 
+   Public Sub SetReference()
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_CurrMachine = m_MainWindow.m_CurrentMachine
+      m_CurrNcComm = m_MainWindow.m_CNCommunication
+   End Sub
+
    Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -248,6 +252,10 @@ Public Class ProjectMgrUC
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -349,6 +357,14 @@ Public Class ProjectMgrUC
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
+      ' se esiste salvo il nome del progetto
+      Dim sCurrProjName As String = String.Empty
+      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrProjName, m_MainWindow.GetIniFile())
+      If Not String.IsNullOrEmpty(sCurrProjName) Then
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME, sCurrProjName)
+      Else
+         EgtRemoveInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME)
+      End If
 
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
@@ -466,20 +482,15 @@ Public Class ProjectMgrUC
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
-               ''-------------------Avvio il Ciclo-Start-------------------------
-               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
-               'MyCicloStartWD.ShowDialog()
-               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
 
-         '-------------------Avvio il Ciclo-Start-------------------------
-         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
+         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
             Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
             MyCicloStartWD.ShowDialog()
          End If
-
-         '-------------------Avvio il Ciclo-Start-------------------------
+         '------------------- FINE Avvio il Ciclo-Start-------------------------
 
          ' Altrimenti linea di produzione
       Else

RawPhoto/RawPartPageUC.xaml.vb

@@ -142,7 +142,7 @@ Public Class RawPartPageUC
                    GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
       SlabIdBtn.Visibility = If(m_bSlabId, Windows.Visibility.Visible, Windows.Visibility.Collapsed)
 
-      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, "SmartMachiningPage", 0, m_MainWindow.GetIniFile()) <> 0
+      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, K_SMARTMACHININGPAGE, 0, m_MainWindow.GetIniFile()) <> 0
 
       ' Imposto i messaggi letti dal file dei messaggi
       OutlineBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 33)       'Rectangle - Rettangolo

Simulation/SimulationPageUC.xaml

@@ -240,6 +240,9 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
+         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateXPIUC_Click">
+                <Image Source="{DynamicResource GenerateCNImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
+         </Button>
          <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtnUC_Click">
             <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>

Simulation/SimulationPageUC.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.Runtime.InteropServices
 Imports EgtUILib
+Imports EgtWPFLib
 
 Public Class SimulationPageUC
    ' Riferimenti a pagine
@@ -76,6 +77,12 @@ Public Class SimulationPageUC
       End If
       ' Pulsante Play
       PlayPauseImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Play.png", UriKind.Relative))
+      ' abilito la visualizzazione del pulsante per la sola generazione del codice CN
+      If GetPrivateProfileInt(S_GENERAL, K_GENERATECN, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         GenerateCN_Btn.Visibility = Visibility.Visible
+      Else
+         GenerateCN_Btn.Visibility = Visibility.Hidden
+      End If
    End Sub
 
    Private Sub SimulationPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -559,6 +566,111 @@ Public Class SimulationPageUC
 
    End Sub
 
+   Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      Dim bOk As Boolean = True
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      ' Elimino eventuale attrezzaggio da OmagOFFICE
+      EgtEraseCurrSetup()
+      ' Verifico l'attrezzaggio degli utensili utilizzati
+      Dim sMissingTools As String = String.Empty
+      If Not VerifySetup(sMissingTools) Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90322) & " " & sMissingTools)  'Mancano gli utensili : ... 
+         Return
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Aggiorno flag per lavaggio
+      m_CurrProjPage.UpdateWashingFlag()
+      ' Aggiorno flag per tastatura per tagli con angolo di fianco
+      m_CurrProjPage.UpdateSideAngCutProbeFlag()
+      ' Se pezzi piani e non c'è ordine delle lavorazioni, ricalcolo tutto e ne faccio uno automatico
+      Dim nPrjType As Integer = m_CurrProjPage.GetCurrentProjectType()
+      Dim bDirectCut As Boolean = (GetDirectCutPart() <> GDB_ID.NULL)
+      If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+         Not bDirectCut And
+         Not m_CurrProjPage.GetOrderMachiningFlag() Then
+         ResetAllMachinings()
+         bOk = SortAllMachinings()
+         If bOk Then
+            m_CurrProjPage.SetOrderMachiningFlag()
+            Dim bModif As Boolean = TestAllMachiningsForStrict()
+            If bModif Then
+               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
+            Else
+               m_CurrProjPage.SetInfoMessage(EgtMsg(90399))        'Aggiornate tutte le lavorazioni
+            End If
+            EgtDraw()
+         End If
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Disabilito impostazione modificato
+      EgtDisableModified()
+      ' Aggiorno le lavorazioni
+      bOk = UpdateAllMachiningsToolpaths() And bOk
+      ' Aggiorno posizionamento ventose sui pezzi per eventuali tagli da sotto con lama
+      bOk = UpdateVacuumsForDrip() And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Inserisco indice di progetto
+      m_CurrProjPage.SetProjectIndexFlag()
+      ' Inserisco il materiale
+      m_CurrProjPage.SetProjectMaterial()
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\MachProj.nge"
+      m_CurrProjPage.SaveFile(sMchPath)
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Se modalità Ufficio, copio il progetto ed esco
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         ' Ripristino come fase corrente quella iniziale
+         EgtSetCurrPhase(1)
+         ' Chiedo il nome del file esportato
+         Dim MySaveNameWD As New SaveNameWD(m_MainWindow, SaveNameWD.SAVE_TYPE.PRJ_COPY)
+         MySaveNameWD.ShowDialog()
+         Return
+      End If
+      ' Se presente ripartenza, ne chiedo conferma
+      Dim nPhaseRestart As Integer = m_CurrProjPage.GetProjectNcRestart()
+      If nPhaseRestart <> 0 Then
+         ' Confermi ripartenza dalla fase NNN ?
+         Dim AskNcRestart As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90326), nPhaseRestart),
+                                        EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL, 2)
+         Select Case AskNcRestart.m_nPressedBtn
+            Case 1         ' YES
+            Case 2         ' NO
+               EgtEnableModified()
+               m_CurrProjPage.ResetProjectNcRestart()
+               nPhaseRestart = 0
+               EgtDisableModified()
+            Case Else      ' CANCEL
+               Return
+         End Select
+      End If
+      ' Se abilitate, eseguo le stime
+      If GetPrivateProfileInt(S_MACH_ESTIMATIONS, K_ENABLEEST, 0, m_MainWindow.GetMachIniFile()) <> 0 Then
+         EgtEstimate(m_MainWindow.GetTempDir() & "\MachProj.html", "OmagCut ver." & m_MainWindow.GetVersion())
+      End If
+      ' Genero file CNC (lancio anche se errore in precedenza) -> recupero la tavola corrente! CamAuto.GetCurrentTable()
+      Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
+      Dim sIndexTab As String = String.Empty
+      If nIndexTab > 0 Then
+         sIndexTab = nIndexTab.ToString
+      End If
+      Dim sFileName As String = "CadCut" & sIndexTab
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\" & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      bOk = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion()) And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Ripristino come fase corrente quella iniziale
+      EgtSetCurrPhase(1)
+      If bOk Then
+         m_CurrProjPage.SetInfoMessage("Genarato file " & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+      Else
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+      End If
+   End Sub
+
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer
       ' Visualizzo assi
       ShowCncData()

Utility/Utility.vb

@@ -60,6 +60,69 @@ Module Utility
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+", "1", "0", "0", "0"}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
+
    Friend Function UIExprToExpr(sUIExpr As String) As String
       If String.IsNullOrWhiteSpace(sUIExpr) Then
          Return ""