Cambio versione 2.4k2

- migliorati controlli per chiave di rete.

CAM/CamAuto.vb

@@ -93,7 +93,7 @@ Friend Module CamAuto
       If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS Then
          ' Reinserisco tutte le lavorazioni piane
          AddMachinings(GDB_ID.NULL, nWarn)
-      ' Se altrimenti progetto con cornici
+         ' Se altrimenti progetto con cornici
       ElseIf nPrjType = CurrentProjectPageUC.PRJ_TYPE.FRAMES Then
          ' Reinserisco tutte le lavorazioni delle cornici
          AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
@@ -101,6 +101,82 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBRidges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -29,6 +30,10 @@ Friend Module CSVFile
       Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -59,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -79,6 +85,9 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
          EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -139,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -181,6 +192,8 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -208,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -229,19 +243,44 @@ Friend Module CSVFile
             Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
             Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,6 +28,10 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFaimily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFaimily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -480,7 +626,7 @@ Public Class CSVPage
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -490,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -519,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -595,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -607,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -630,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml.vb

@@ -107,6 +107,9 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +143,9 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -165,6 +171,9 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +181,9 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,6 +205,9 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
@@ -206,9 +221,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split

CadCuts/MoveRawPartPage.xaml

@@ -133,10 +133,14 @@
          </Button>
 
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Grid Grid.Row="7" Grid.ColumnSpan="3">
+         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+
+            <Grid Grid.Row="7" Grid.ColumnSpan="3">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>
                <ColumnDefinition Width="1*"/>
@@ -155,9 +159,11 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="10*"/>
          </Grid.ColumnDefinitions>
-
-
-      </Grid>
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
    </Grid>
 

CadCuts/MoveRawPartPage.xaml.vb

@@ -11,8 +11,12 @@ Public Class MoveRawPartPage
    Private m_nAuxTabId As Integer = GDB_ID.NULL
    ' Fase corrente
    Private m_nCurrPhase As Integer = 0
+   ' Disposizione corrente
+   Private m_nCurrDisposition As Integer = GDB_ID.NULL
    ' Premuto Prev
    Private m_bPrev As Boolean = False
+   ' Pemuto Next
+   Private m_bToNext As Boolean = False
    ' Dati movimento
    Private m_dStep As Double = 0
    Private m_dRotation As Double = 0
@@ -27,18 +31,24 @@ Public Class MoveRawPartPage
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
+   ' Visibilità comando Scrap
+   Private m_ScrapsVisibility As Visibility = Visibility.Visible
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
+      ScrapsBtn.Content = "Add Scraps"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_SplitPage = m_MainWindow.m_CadCutPageUC.m_SplitPage
       m_bActive = True
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Leggo tipo movimento grezzi
       m_bByHand = (GetVacuumType() = 0 Or
                    Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.AUTO_MANIP) Or
@@ -55,40 +65,47 @@ Public Class MoveRawPartPage
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
       Dim nPrevPhase As Integer = EgtGetCurrPhase()
+      ' Creo nuova fase, eseguo spezzatura grezzi e vi sposto le lavorazioni
+      Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
-         ' Creo nuova fase, eseguo spezzatura grezzi e vi sposto le lavorazioni
-         Dim vNewRaws As New List(Of Integer)
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
       Else
          EgtSetCurrPhase(nPrevPhase + 1)
          HideAllMachinings()
       End If
       m_nCurrPhase = EgtGetCurrPhase()
+
+      '---------------------------- SCRAPS ----------------------------
+      ' gestione visualizzazione del comando "Scraps"
+      Dim ScrapsVisibility As Visibility = Visibility.Collapsed
+      ' verifico se licenza abilitat: m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SCRAPS)
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, m_MainWindow.GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\OmagPHOTODb.sqlite") Then
+            ScrapsVisibility = Visibility.Visible
+         End If
+      End If
+      ' verifico che siano stati generati dei nuovi grezzi
+      If vNewRaws.Count = 0 Then
+         ScrapsVisibility = Visibility.Collapsed
+      End If
+      ' aggiorno la grafica
+      m_ScrapsVisibility = ScrapsVisibility
+      If m_ScrapsVisibility <> Visibility.Visible Then
+         Grid.SetColumnSpan(RemovePartBtn, 3)
+      Else
+         Grid.SetColumnSpan(RemovePartBtn, 2)
+      End If
+      '---------------------------- SCRAPS ----------------------------
+
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
       If m_SplitPage.m_bOnAuxTab Then
-         m_nAuxTabId = EgtGetTableId(AUX_TAB)
-         ' Visualizzo tavolo ausiliario
-         Dim bOldEnMod As Boolean = EgtGetEnableModified()
-         If bOldEnMod Then EgtDisableModified()
-         EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
-         If bOldEnMod Then EgtEnableModified()
-         ' Se definizione movimenti
-         If Not m_SplitPage.m_bShow Then
-            ' Area tavolo ausiliario
-            Dim b3AuxTab As New BBox3d
-            EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
-            ' Area tavolo principale
-            Dim b3Tab As New BBox3d
-            EgtGetTableArea(1, b3Tab)
-            ' Imposto offset su tavolo principale per includere anche il secondario
-            Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
-            Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
-            Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
-            Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
-            EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
-         End If
-         EgtZoom(ZM.ALL)
-      ' altrimenti, aggiorno visualizzazione
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
+         SetAuxTabInCurrDisposition()
+         ' altrimenti, aggiorno visualizzazione
       Else
          EgtDraw()
       End If
@@ -126,14 +143,14 @@ Public Class MoveRawPartPage
                ' Distanza iniziale
                m_dCurrDist = 0
             End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
          Else
             m_vtDir = Vector3d.Y_AX()
             m_ptMid = Point3d.ORIG()
             m_dOrigDist = 0
             m_dCurrDist = 0
          End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
       Else
          m_bRemovedRaw = False
          m_bRawWithCups = False
@@ -147,6 +164,9 @@ Public Class MoveRawPartPage
             GetMoveInfoInDisposition(nDispId, m_RawMoveDataList)
          End If
       End If
+
+      ' aggiorno il messaggio del comando per gestire gli sfridi
+      VerifyIsNewScrap(m_CurrRawOnVacuum)
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -162,8 +182,10 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento con ventose
+         ScrapsBtn.Visibility = m_ScrapsVisibility
+         ' altrimenti per movimento con ventose
       ElseIf Not m_SplitPage.m_bOnAuxTab Then
          UpBtn.Visibility = Windows.Visibility.Visible
          LeftBtn.Visibility = Windows.Visibility.Visible
@@ -178,8 +200,10 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento finale dei pezzi
+         ScrapsBtn.Visibility = m_ScrapsVisibility
+         ' altrimenti per movimento finale dei pezzi
       Else
          UpBtn.Visibility = Windows.Visibility.Hidden
          LeftBtn.Visibility = Windows.Visibility.Hidden
@@ -194,14 +218,45 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Visible
          BottomLBtn.Visibility = Windows.Visibility.Visible
          BottomRBtn.Visibility = Windows.Visibility.Visible
+         PauseBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
+         ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
       ' Abilitazione bottone modifica
       ModifyBtn.IsEnabled = m_SplitPage.m_bShow
       ' gestione abilitazione altri bottoni
       EnableButtons()
    End Sub
 
+   Private Sub SetAuxTabInCurrDisposition()
+      ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
+      m_nAuxTabId = EgtGetTableId(AUX_TAB)
+      ' Visualizzo tavolo ausiliario
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
+      If bOldEnMod Then EgtEnableModified()
+      ' Se definizione movimenti
+      If Not m_SplitPage.m_bShow Then
+         ' Area tavolo ausiliario
+         Dim b3AuxTab As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+         ' Area tavolo principale
+         Dim b3Tab As New BBox3d
+         EgtGetTableArea(1, b3Tab)
+         ' Imposto offset su tavolo principale per includere anche il secondario
+         Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
+         Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
+         Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
+         Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
+         EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
+      End If
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -230,16 +285,50 @@ Public Class MoveRawPartPage
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nId, nStat)
+            ' aggiorno il messaggio del bottone "Scrap" a seconda che il grezzo sia già uno scrap
+            VerifyIsNewScrap(nId)
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                     ' mantengo la selezione del pezzo
+                     EgtSetStatus(nId, GDB_ST.SEL)
+                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  Else
+                     ' Se con ventose, le nascondo
+                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
+               ' Deseleziono tutto e abilito la selezione del pezzo corrente
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
                If Not m_bByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, m_MainWindow.GetMachIniFile())
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
+                  VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -249,10 +338,18 @@ Public Class MoveRawPartPage
                      ' Reset eventuale messaggio
                      m_CurrProjPage.ClearMessage()
                   Else
+                     ' nascondo la visualizzazione delle ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento
-                     m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     If VacuumCups.bOverWeight Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4)) 'Pezzo troppo pesante : non si può muovere
+                     ElseIf VacuumCups.bExtraStroke Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5)) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     End If
                   End If
                End If
             End If
@@ -261,8 +358,75 @@ Public Class MoveRawPartPage
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+      End If
+
    End Sub
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
+   Private Function VerifyIsNewScrap(nMyId As Integer) As Boolean
+      Dim nVal As Integer = 0
+      If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
+         If nVal = 1 Or nVal = 2 Then
+            ' 1 → è stato definito come nuovo grezzo oppure, 2 → è stato definito come nuovo grezzo ed è stato inserito nel DB delle lastre
+            ScrapsBtn.Content = "Remove Scrap"
+            ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
+            Return True
+         ElseIf nVal = 3 Then
+            ' non è possibile rimuovere il grezzo in questa fase
+            ScrapsBtn.Content = "Defined as Scrap"
+            ScrapsBtn.IsEnabled = False
+            Return True
+         End If
+      End If
+      ' non è un nuovo grezzo
+      ScrapsBtn.Content = "Add Scrap"
+      ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
+      Return False
+   End Function
+
+#Region "Move Up/Down/Left/Right"
+
    Private Sub UpBtn_Click(sender As Object, e As RoutedEventArgs) Handles UpBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -285,9 +449,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -322,9 +492,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -342,9 +518,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -361,9 +543,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(-m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -373,6 +561,77 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region   'Move Up/Down/Left/Right
+
+   ' verifica che la poszione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+
+#Region "Rotate CounterClockWise/ClockWise"
+
    Private Sub RotateCounterClockwiseBtn_Click(sender As Object, e As RoutedEventArgs) Handles RotateCounterClockwiseBtn.Click
       ' Solo movimento con ventose
       If m_bByHand Then Return
@@ -380,14 +639,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -404,14 +673,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = -m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -421,6 +700,44 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region  ' Rotate CounterClockWise/ClockWise
+
+   ' verifica che la rotazione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -440,6 +757,29 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+   Private Sub ScrapsBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ScrapsBtn.Click
+      Dim nRawId As Integer = EgtGetFirstSelectedObj()
+      While nRawId <> GDB_ID.NULL
+         ' verifico che il grezzo non contenga dei pezzi (altrimenti non risulta selezionabile)
+         Dim nPartInRaw As Integer = EgtGetFirstPartInRawPart(nRawId)
+         If nPartInRaw = GDB_ID.NULL Then
+            If Not VerifyIsNewScrap(nRawId) Then
+               EgtSetInfo(nRawId, K_ISNEWSCRAPS, "1")
+            Else
+               EgtRemoveInfo(nRawId, K_ISNEWSCRAPS)
+            End If
+            ' aggiorno il contenuto del bottone
+            VerifyIsNewScrap(nRawId)
+         Else
+            ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+            m_CurrProjPage.ClearMessage()
+            m_CurrProjPage.SetErrorMessage("Part inside raw!")
+         End If
+         ' passo al grezzo succesivo (NON dovrebbero esserci altri grezzi selezionabili contemporaneamente!)
+         nRawId = EgtGetNextSelectedObj()
+      End While
+   End Sub
+
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -502,9 +842,12 @@ Public Class MoveRawPartPage
 
       ' ricavo l'angolo di posizionamento del grezzo/pezzo sulla tavola
       If Not DispositionRawOnTable(nRawId, dAngRaw, AngRotList) Then Return
+      Dim bb3dRaw As New BBox3d
+      EgtGetRawPartBBox(nRawId, bb3dRaw)
+      Dim ForceToRotate As Boolean = bb3dRaw.DimX < bb3dRaw.DimY
 
       ' provo a verificare di poter depositare il pezzo (senza applicare delle rotazioni)
-      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
+      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Or ForceToRotate Then
          ' se sono impostati degli step di rotazione
          If AngRotList.Count > 0 Then
             Dim bOkRotate As Boolean = False
@@ -524,6 +867,16 @@ Public Class MoveRawPartPage
             Next
             If Not bOkRotate Then Return
          Else
+            ' sposto il pezzo in centro tavola → perchè tutti i movimenti sono fatti ruotando il pezzo in centro tavola!
+            Dim b3Area As New BBox3d
+            EgtGetTableArea(1, b3Area)
+            Dim b3RawTemp As New BBox3d
+            EgtGetRawPartBBox(nRawId, b3RawTemp)
+            ' ricavo il riferimento dell'angolo in basso a sinstra del grezzo rispetto alla tavola
+            Dim ptCorner As Point3d = New Point3d(b3Area.DimX / 2, b3Area.DimY / 2, 0) - New Vector3d(b3RawTemp.DimX / 2, b3RawTemp.DimY / 2, 0)
+            ' sposto il pezzo in questa posizione
+            EgtMoveToCornerRawPart(nRawId, ptCorner, MCH_CR.BL)
+            ' riprovo il movimento
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw) Then
                If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
                   ' riposiziono il pezzo come era prima
@@ -638,6 +991,64 @@ Public Class MoveRawPartPage
       Return True
    End Function
 
+   Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
+      If m_RawMoveDataList.Count = 0 Then Return
+      ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
+      Dim Index As Integer = 0
+      For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
+         If Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.x) < EPS_SMALL AndAlso Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.y) < EPS_SMALL Then
+            m_RawMoveDataList.RemoveAt(Index)
+         End If
+      Next
+      ' verifico che la lista non sia vuota
+      If m_RawMoveDataList.Count = 0 Then Return
+
+      ' recupero disposizione fase corrente
+      Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' imposto la pausa nella disposizione corrente
+      SetPause(nDispId)
+      ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
+      SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
+      ' imposto eventuale movimento pezzi su tavola ausiliaria
+      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      '' Eseguo calcolo speciale dei movimenti: per tavola multicut
+      'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+
+      ' Creo nuova fase
+      Dim nNewPhase As Integer = EgtAddPhase()
+
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+      Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
+      'SetPause(nCurrDisposition)
+      m_nCurrDisposition = nCurrDisposition
+      ' EgtSetStatus(nRawIdSlected, GDB_ST.OFF)
+      EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+      EgtSetCurrPhase(nNewPhase)
+      SetAuxTabInCurrDisposition()
+      ' ripulisco la lista degli spostamenti
+      m_RawMoveDataList.Clear()
+      ' aggiorno la fase corrente
+      m_nCurrPhase = EgtGetCurrPhase()
+   End Sub
+
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
       ' Recupero il primo grezzo selezionato
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
@@ -658,17 +1069,75 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Torno alla fase precedente
       m_bPrev = True
-      ' Passo alla pagina delle spezzature
+      ' Passo alla pagina delle spezzature solo se non esiste prima una fased di deposito sulla tavola di scarico
+
+      Dim nPrevDispId As Integer = EgtGetPrevOperation(m_nCurrDisposition)
+      ' verifico se la fasa precedente è di tipo scarico
+      If IsDispUnloadOnAuxTab(nPrevDispId) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase - 1)
+         m_nCurrDisposition = nPrevDispId
+         m_nCurrPhase -= 1
+         m_bPrev = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         Return
+      End If
+
+      'If EgtGetOperationType(EgtGetPrevOperation(m_nCurrDisposition)) = MCH_OY.DISP AndAlso m_SplitPage.m_bOnAuxTab Then
+      '   EgtSetCurrPhase(m_nCurrPhase - 1)
+      '   m_nCurrDisposition = EgtGetPrevOperation(m_nCurrDisposition)
+      '   m_nCurrPhase -= 1
+      '   m_bPrev = False
+      '   m_SplitPage.m_bShow = True
+      '   EgtDraw()
+      '   Return
+      'End If
+
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_SplitPage)
       m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.Split
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+
+      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+      If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase + 1)
+         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         m_nCurrPhase += 1
+         m_bToNext = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         EnableButtons()
+         Return
+      End If
+
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Passo alla pagina delle spezzature
@@ -712,6 +1181,26 @@ Public Class MoveRawPartPage
       EnableButtons()
    End Sub
 
+   ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
+   Public Function IsDispUnloadOnAuxTab(nCurrDispId As Integer) As Integer
+      ' verifico se la fase precedente è uno scarico su tavola ausiliaria
+      Dim bVal As Integer = 0
+      EgtGetInfo(nCurrDispId, "Pat", bVal)
+      Return bVal
+   End Function
+
+   ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
+   Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
+      Dim nDispId As Integer = nCurrDisposId
+      While nDispId <> GDB_ID.NULL
+         If EgtGetOperationType(nDispId) = MCH_OY.DISP Then
+            Return nDispId
+         End If
+         nDispId = EgtGetNextOperation(nDispId)
+      End While
+      Return GDB_ID.NULL
+   End Function
+
    Private Sub EnableButtons()
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -726,11 +1215,22 @@ Public Class MoveRawPartPage
       TopRBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomLBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
+      PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
-      NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      If m_SplitPage.m_bShow Then
+         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+      Else
+         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      End If
    End Sub
 
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
+      ' verifico che la fase corrente non sia vuota
+      Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+         EgtErase(nLastDispId)
+      End If
+
       ' Se movimento con ventose
       If Not m_bByHand Then
          ' nascondo le ventose
@@ -746,11 +1246,11 @@ Public Class MoveRawPartPage
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
             ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable( nDispId, m_SplitPage.m_bOnAuxTab)
+            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
-      ' se altrimenti movimento senza ventose perchè lama troppo grande
+         ' se altrimenti movimento senza ventose perchè lama troppo grande
       ElseIf GetVacuumType() > 0 Then
          ' se non solo visualizzazione
          If Not m_SplitPage.m_bShow Then

CadCuts/NestPageUC.xaml

@@ -99,19 +99,30 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
-
-            <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
                 <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,72 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.3*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+
+            </Grid.RowDefinitions>
+
+            <!--Messaggio: Seleziona il numero di pezzi-->
+            <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+                <TextBlock Name="NbrOfPartsMsg"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            </UniformGrid>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+
+                </Grid.ColumnDefinitions>
+
+                <!--ultimo progetto-->
+                <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--nuovo progetto-->
+                <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Select all" Visibility="Collapsed">
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--apri folder progetti-->
+                <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Cancel">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = "Selection parts"
+      NbrOfPartsMsg.Text = "Number of parts"
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SplitAuto.vb

@@ -363,6 +363,13 @@ Public Module SplitAuto
                   vNewRaws.Add(nNewRawId)
                   nNewRawId = EgtGetNextRawPart(nNewRawId)
                End While
+            Else
+               ' verifico che nella fase precedente è stato definito come sfrido, allora lo riassegno
+               Dim nVal As Integer = 0
+               EgtGetInfo(nRawId, K_ISNEWSCRAPS, nVal)
+               If nVal = 1 Or nVal = 2 Or nVal = 3 Then
+                  EgtSetInfo(nRaw1Id, K_ISNEWSCRAPS, "3")
+               End If
             End If
             ' Assegno ai nuovi grezzi eventuale texture del grezzo originale
             Dim nSolidId = EgtGetFirstNameInGroup(nRawId, NAME_RAW_SOLID)

CadCuts/SplitPageUC.xaml

@@ -48,8 +48,8 @@
             </Button>
             <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
             <Button Name="AutoBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="RestartBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" Visibility="Hidden"/>
-         </Grid>
+                <Button Name="RestartBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" Visibility="Hidden"/>
+            </Grid>
       </Grid>
 
       <!--Left Button Grid-->
@@ -125,6 +125,17 @@
                 <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+
+                <!-- solo per macchine con lavorazioni Waterjet -->
+                <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+
+                <!-- solo per macchine con lavorazioni Waterjet -->
+                <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+
                 <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>

CadCuts/SplitPageUC.xaml.vb

@@ -7,6 +7,7 @@ Public Class SplitPageUC
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
@@ -26,6 +27,19 @@ Public Class SplitPageUC
    ' verifico che le lavorazioni selezionate siano omogenee (con lo stesso utensile)
    Private m_bAreHomogeneous As Boolean = False
 
+   ' Id tagli WJ per generazione ponticelli tra due percorsi
+   Private m_nIdSelectedPartWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedPartWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_End As Integer = GDB_ID.NULL
+   ' Id gruppo Bridges (Nuovo da versione 30/08/2022)
+   Private m_nIdBridgesGroup As Integer = GDB_ID.NULL
+   Private m_nIdBridge As Integer = GDB_ID.NULL
+   Private m_ptSrtBridge As New Point3d
+   Private m_ptEndBridge As New Point3d
+
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    'Private m_CurrInd As Integer = -1
    'Private m_CurrItems As New List(Of NameIdLsBxItem)
@@ -43,6 +57,8 @@ Public Class SplitPageUC
    Private m_bDragging As Boolean = False
    ' Selected cut
    Private m_nSelected As Integer = GDB_ID.NULL
+   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
+   Private m_StartEndModifyOnIntCorner As Boolean = False
 
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
@@ -70,6 +86,8 @@ Public Class SplitPageUC
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       ' Modifica
       AutoBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 18)         ' Auto
       RestartBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 19)      ' Restart
+      BridgesWJBtn.ToolTip = "Bridges"
+      BridgesDeleteWJBtn.ToolTip = "Remove bridges"
    End Sub
 
    Private Sub SplitPageUC_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -90,6 +108,8 @@ Public Class SplitPageUC
       m_bEnableOnAuxTab = Not m_bByHand AndAlso
                           m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MOVE_PARTS) AndAlso
                           EgtGetTableId(AUX_TAB) <> GDB_ID.NULL
+      ' verifico se è abilitata la possibiltà di allungare i lati interni
+      m_StartEndModifyOnIntCorner = (GetPrivateProfileInt(S_NEST, K_STARTENDMODIFYONINTCORNER, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Nascondo eventuali pezzi in parcheggio
       HideParkedParts()
       ' Nascondo eventuale contorno da foto
@@ -195,6 +215,243 @@ Public Class SplitPageUC
       Next
    End Sub
 
+#Region "BRIDGE"
+
+   Private Sub OnMyMouseDownSceneBridges(sender As Object, e As System.Windows.Forms.MouseEventArgs,
+                                         ByVal IsFirst As Boolean,
+                                         ByRef m_nIdSelectedSideWJ As Integer,
+                                         ByRef m_nIdSelectedWaterJet As Integer,
+                                         ByRef nIdParentPart As Integer)
+
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If (EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE) AndAlso VerifySideIsAcceptable(nIdMy) Then
+               If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
+                  EgtDeselectObj(m_nIdSelectedSideWJ)
+               End If
+               ' recupero il gruppo della lavorazione associata
+               nIdParentPart = EgtGetParent(nIdParent)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If IsWaterJetting(nIdMy) Then
+                  ' NON RECUPERO LA PREVIEW DELLA LAVORAZIONE → m_nIdSelectedWaterJet
+                  m_nIdSelectedSideWJ = nIdMy
+                  ' recupero il punto più vicino alla curva passata
+                  If IsFirst Then
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptSrtBridge)
+                  Else
+                     ' prima di confermare verifico che non ci siano interferenze
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptEndBridge)
+                     EgtModifyCurveEndPoint(m_nIdBridge, m_ptEndBridge, GDB_RT.GLOB)
+                     If VerifyInterference(m_nIdBridge) Then
+                        m_CurrProjPage.ClearMessage()
+                        EgtSetInfo(m_nIdBridge, "PartStart", m_nIdSelectedPartWJ_Srt)
+                        EgtSetInfo(m_nIdBridge, "EntStart", m_nIdSelectedSideWJ_Srt)
+                        EgtSetInfo(m_nIdBridge, "PartEnd", m_nIdSelectedPartWJ_End)
+                        EgtSetInfo(m_nIdBridge, "EntEnd", m_nIdSelectedSideWJ_End)
+                        EgtSetInfo(m_nIdBridge, "Ph", EgtGetCurrPhase())
+                        ' Ricalcolo tutte le lavorazioni
+                        Dim nWarn As Integer = 0
+                        ResetAllMachinings(nWarn)
+                     Else
+                        ' attendo la selezione di un punto valido
+                        m_nIdSelectedSideWJ = GDB_ID.NULL
+                        nIdParentPart = GDB_ID.NULL
+                        m_CurrProjPage.ClearMessage()
+                        m_CurrProjPage.SetWarningMessage("Bridge intersects part")
+                        Return
+                     End If
+                  End If
+                  ' salvo il valore del PreView evidenziato
+                  EgtSetMark(nIdParentPart)
+                  ' EgtSetMark(nIdWJ)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseDownSceneBridgesDelete(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sGroupName As String = String.Empty
+         Dim sSelName As String = String.Empty
+         ' gruppo di appartenenza
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del gruppo di appartenenza
+         EgtGetName(nIdParent, sGroupName)
+         ' recupero il nome dell'oggetto selezionato
+         EgtGetName(nIdMy, sSelName)
+         If sGroupName.Contains(BRIDGES) AndAlso sSelName.Contains(BRIDGELINE) Then
+            EgtErase(nIdMy)
+            EgtDraw()
+            ' Ricalcolo tutte le lavorazioni
+            Dim nWarn As Integer = 0
+            ResetAllMachinings(nWarn)
+            Return
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseMoveSceneBridges(ptCurr As Point3d)
+      ptCurr.z = m_ptSrtBridge.z
+      ' rappresento il egmento
+      If m_nIdBridge = GDB_ID.NULL Then
+         m_nIdBridge = EgtCreateLine(m_nIdBridgesGroup, m_ptSrtBridge, ptCurr, GDB_RT.GLOB)
+         ' assegno un nome alla linea
+         EgtSetName(m_nIdBridge, BRIDGELINE)
+      End If
+      EgtModifyCurveEndPoint(m_nIdBridge, ptCurr, GDB_RT.GLOB)
+      EgtDraw()
+   End Sub
+
+   Private Function VerifyInterference(nIdBridge As Integer) As Boolean
+      ' prima di procedere alla verifica accorco il segmento (solo per sicurezza) 10 * EPS_SMALL
+      Dim dLen As Double
+      EgtCurveLength(nIdBridge, dLen)
+      If dLen > 21 AndAlso Not EgtCurveIsClosed(nIdBridge) Then
+         EgtTrimCurveEndAtLen(nIdBridge, dLen - 10 * EPS_SMALL)
+         EgtTrimCurveStartAtLen(nIdBridge, 10 * EPS_SMALL)
+      End If
+      ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
+      Dim nIdPart As Integer = GDB_ID.NULL
+      nIdPart = EgtGetFirstPartInRawPart(m_CurrProjPage.m_nRawId)
+      While nIdPart <> GDB_ID.NULL
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nIdPart, "Region")
+         Dim nIdSurf As Integer = EgtGetFirstInGroup(nIdRegion)
+         While nIdSurf <> GDB_ID.NULL
+            If EgtGetType(nIdSurf) = GDB_TY.SRF_FRGN Then
+               ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
+               ' se la linea bridge interseca la superficie allora restitusco false
+               If EgtCurveWithRegionClassify(nIdBridge, nIdSurf) <> CREGC.OUT Then
+                  EgtExtendCurveStartByLen(nIdBridge, 10 * EPS_SMALL)
+                  Return False
+               End If
+               Exit While
+            End If
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return True
+   End Function
+
+   Private Function VerifySideIsAcceptable(nMyId As Integer) As Boolean
+      Dim dVal As Double = 0
+      ' verifico che l'entità selezionata non contenga questi parametri
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE2, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_ORIG_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      ' altrimenti l'entità è accettabile
+      Return True
+   End Function
+
+   ' verifico che il lato selezionato appartenga ad una lavorazione di tipo Waterjet
+   Private Function IsWaterJetting(nMyId As Integer) As Boolean
+      ' verifico che sul lato indicato sia impostato un taglio di tipo WaterJet
+      Dim nMchId As Integer = GDB_ID.NULL
+      For nInd As Integer = 0 To m_MachiningList.Count() - 1
+         nMchId = m_MachiningList(nInd).m_nId
+         Dim nMachiningType As Integer = EgtGetOperationType(m_MachiningList(nInd).m_nId)
+         If nMachiningType = MCH_MY.WATERJETTING Then
+            EgtSetCurrMachining(nMchId)
+            Dim nIndex As Integer = 0
+            Dim nIdSide As Integer = GDB_ID.NULL
+            Dim nSub As Integer = GDB_ID.NULL
+            While EgtGetMachiningGeometry(nIndex, nIdSide, nSub)
+               If nIdSide = nMyId Then
+                  Return True
+               End If
+               nIndex += 1
+            End While
+         End If
+      Next
+      Return False
+   End Function
+
+   Private Sub RefreshMachList()
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' cancello tutti gli indici di lavorazione presenti nel disegno
+         Dim nNbrId As Integer = GDB_ID.NULL
+         EgtErase(m_MachiningList(nI).m_nNbrId)
+         EgtRemoveInfo(m_MachiningList(nI).m_nId, "NbrId")
+      Next
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      ' Aggiorno visualizzazione delle lavorazioni
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' sistemo colore
+         ColorMachining(m_MachiningList(nI))
+         ' assegno nuova numerazione
+         NumberDirectionMachining(nI)
+         ' conto il numero di tipi di lavorazioni
+         CountMachiningType(m_MachiningList(nI), m_nCountSawing, m_nCountWaterjetting, m_nCountOtherMachining)
+      Next
+      ' aggiorno grafica
+      ShowMachiningList()
+      ' aggiorno la visualizzazione
+      EgtDraw()
+   End Sub
+
+   Private Sub DeselectWJBridgesPart()
+      ' se in fase di definzione di un ponticello lo elimino
+      If m_nIdSelectedSideWJ_Srt <> GDB_ID.NULL And m_nIdSelectedSideWJ_End = GDB_ID.NULL And m_nIdBridge <> GDB_ID.NULL Then
+         EgtErase(EgtGetParent(m_nIdBridge))
+      End If
+      m_nIdBridge = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_Srt)
+      m_nIdSelectedPartWJ_Srt = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_Srt)
+      m_nIdSelectedSideWJ_Srt = GDB_ID.NULL
+      m_nIdSelectedWaterJet_Srt = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_End)
+      m_nIdSelectedPartWJ_End = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_End)
+      m_nIdSelectedSideWJ_End = GDB_ID.NULL
+      m_nIdSelectedWaterJet_End = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+#End Region    ' Bridge
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse m_bShow Then Return
@@ -203,6 +460,31 @@ Public Class SplitPageUC
          Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
          Return
       End If
+
+      ' definizione dei ponticelli
+      If BridgesWJBtn.IsChecked Then
+         If m_nIdSelectedPartWJ_Srt = GDB_ID.NULL Then
+            OnMyMouseDownSceneBridges(sender, e, True, m_nIdSelectedSideWJ_Srt, m_nIdSelectedWaterJet_Srt, m_nIdSelectedPartWJ_Srt)
+         Else
+            OnMyMouseDownSceneBridges(sender, e, False, m_nIdSelectedSideWJ_End, m_nIdSelectedWaterJet_End, m_nIdSelectedPartWJ_End)
+            ' aggiorno la visualizzazione delle lavorazioni e la lista
+            RefreshMachList()
+         End If
+         ' se entrambi i pezzi sono stati definiti allora procedo alla deselezione
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL And m_nIdSelectedPartWJ_End <> GDB_ID.NULL Then
+            DeselectWJBridgesPart()
+         End If
+         Return
+      End If
+
+      ' eliminazione dei ponticelli
+      If BridgesDeleteWJBtn.IsChecked Then
+         OnMyMouseDownSceneBridgesDelete(sender, e)
+         ' aggiorno la visualizzazione delle lavorazioni e la lista
+         RefreshMachList()
+         Return
+      End If
+
       ' Reset drag
       m_nDragInd = -1
       m_nDragType = 0
@@ -287,13 +569,23 @@ Public Class SplitPageUC
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseMoveScene
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse m_bShow Then Return
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+
+      ' definizione dei ponticelli
+      If BridgesWJBtn.IsChecked Then
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL Then
+            OnMyMouseMoveSceneBridges(ptCurr)
+         End If
+         Return
+      End If
+
       ' Se drag non abilitato o in corso
       If m_nDragInd = -1L Or m_bDragging Then Return
       m_bDragging = True
       Dim nOperId As Integer = m_MachiningList(m_nDragInd).m_nId
-      ' Ricavo il punto corrente in coordinate mondo
-      Dim ptCurr As Point3d
-      EgtUnProjectPoint(e.Location, ptCurr)
+
       ' Ricavo il vettore di movimento e la variazione di lunghezza
       Dim vtMove As Vector3d = ptCurr - m_ptDragPrev
       Dim dDelta = vtMove * m_MachiningList(m_nDragInd).m_vtDir
@@ -410,25 +702,38 @@ Public Class SplitPageUC
       VerifyHomogenousMachining(ItemList)
 
       ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(m_ItemList.IndexOf(x), m_ItemList.IndexOf(y)))
-      ' verifico che siano contigui
-      Dim bContigus As Boolean = False
-      Dim OrdIndex = 0
-      OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
-      Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
-      If MachiningLsBx.SelectedItems.Count = 1 Then
-         bContigus = True
+
+      If VerifyContinuity(ItemList) Then
+         MoveUpBtn.IsEnabled = True
+         MoveDownBtn.IsEnabled = True
       Else
-         For Each Item As NameIdLsBxItem In ItemList
-            If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
-               bContigus = True
-            End If
-         Next
-      End If
-      ' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
-      If Not bContigus Then
-         ItemList.Remove(LastSel)
-         MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+         MoveUpBtn.IsEnabled = False
+         MoveDownBtn.IsEnabled = False
       End If
+
+      GetCurrSelection()
+
+      '' verifico che siano contigui
+      'Dim bContigus As Boolean = False
+      'Dim OrdIndex = 0
+      'OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
+      '' recupero l'indice dell'ultimo elemento selezionato
+      'Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
+      'If MachiningLsBx.SelectedItems.Count = 1 Then
+      '   bContigus = True
+      'Else
+      '   For Each Item As NameIdLsBxItem In ItemList
+      '      If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
+      '         bContigus = True
+      '      End If
+      '   Next
+      'End If
+      '' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
+      'If Not bContigus Then
+      '   ItemList.Remove(LastSel)
+      '   MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+      'End If
+
       ' resetto marcatura lavorazioni
       If m_CurrFirstInd > -1 Then
          For Index As Integer = m_CurrFirstInd To m_CurrLastInd
@@ -497,6 +802,9 @@ Public Class SplitPageUC
    Private Sub OnOffBtn_Click(sender As Object, e As RoutedEventArgs) Handles OnOffBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_bEnabled Then
             m_MachiningList(nI).m_bEnabled = False
@@ -557,6 +865,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Provo ad entrambi gli estremi
          Dim bModif As Boolean = AdjustBothCuts(nI)
@@ -582,6 +893,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustEndCut(nI) Then
@@ -601,6 +915,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustStartCut(nI) Then
@@ -616,6 +933,51 @@ Public Class SplitPageUC
       EnableButtons()
    End Sub
 
+   ' ERRORE: questo evento non è eseguito!
+   Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
+      If e.Key = Key.Escape Then
+         ' se sono in fase di creazione di un ponticello interrompo
+         DeselectWJBridgesPart()
+      End If
+   End Sub
+
+   Private Sub BridgeBtn_Click(sender As Object, e As RoutedEventArgs) Handles BridgesWJBtn.Click
+      ' eventualmente spengo il comando per eliminare i ponticelli
+      If BridgesDeleteWJBtn.IsChecked Then
+         BridgesDeleteWJBtn.IsChecked = False
+      End If
+      ' se deseleziono resetto tutte le variabili
+      If Not BridgesWJBtn.IsChecked Then
+         ' se sono in fase di creazione di un ponticello interrompo
+         DeselectWJBridgesPart()
+         Return
+      End If
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = BRIDGES
+      Dim nId As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nId <> GDB_ID.NULL Then
+         m_nIdBridgesGroup = nId
+      End If
+      ' se non lo trovo allora lo creo
+      If nId = GDB_ID.NULL Then
+         m_nIdBridgesGroup = EgtCreateGroup(nIdCurrMachGroup)
+         EgtSetName(m_nIdBridgesGroup, BRIDGES)
+      End If
+   End Sub
+
+   Private Sub BridgeDeleteBtn_Click(Sender As Object, e As RoutedEventArgs) Handles BridgesDeleteWJBtn.Click
+      ' eventualmente spengo il comando per inserire i ponticelli
+      If BridgesWJBtn.IsChecked Then
+         BridgesWJBtn.IsChecked = False
+      End If
+
+      If Not BridgesDeleteWJBtn.IsChecked Then
+         DeselectWJBridgesPart()
+      End If
+   End Sub
+
    Private Function AdjustBothCuts(nI As Integer,
                                    Optional bAllForced As Boolean = False,
                                    Optional bAccForced As Boolean = False) As Boolean
@@ -729,6 +1091,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -827,6 +1192,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -966,6 +1334,8 @@ Public Class SplitPageUC
    Private Sub ModifStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifStartBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUsal As Double = 0
 
@@ -980,6 +1350,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -993,7 +1366,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
@@ -1006,21 +1379,24 @@ Public Class SplitPageUC
             Do
                ' Se c'è limite alla lunghezza libera
                If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
-                  ' Recupero sicurezza in corner interno
-                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-                  ' Recupero lunghezza baffo del taglio
-                  Dim nPvId As Integer = GDB_ID.NULL
-                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-                  Dim dDT As Double = 0
-                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
-                  dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  End If
                End If
                ' Modifica della lavorazione
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
                ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
-               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUsal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
@@ -1045,16 +1421,16 @@ Public Class SplitPageUC
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
-            If bFirstInd Then
+            If bFirstMill Then
                ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
                dUsal = ValWnd.GetVal()
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1071,7 +1447,7 @@ Public Class SplitPageUC
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim bOriginalIsLeadIn As Boolean = True
                Dim dOriginalAddLen As Double = 0
@@ -1086,7 +1462,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LIPERP, nOriginalPerpDist)
                EgtGetMachiningParam(MCH_MP.LEADINTYPE, nOriginalLeadInType)
                ' Dialogo richiesta valori
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
                ModifStartWnd.SetElongation(dOriginalAddLen)
                ModifStartWnd.SetHole(bOriginalLiHole)
                ModifStartWnd.SetLiTangDist(nOriginalTangDist)
@@ -1101,7 +1477,7 @@ Public Class SplitPageUC
                nWJPerpDist = ModifStartWnd.GetLiPerpDist()
                nWJLeadInType = ModifStartWnd.GetLeadInType().Id
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstWJ = False
             End If
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1132,6 +1508,8 @@ Public Class SplitPageUC
    Private Sub ModifEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifEndBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUeal As Double = 0
 
@@ -1145,6 +1523,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -1158,7 +1539,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
@@ -1169,21 +1550,24 @@ Public Class SplitPageUC
             Do
                ' Se c'è limite alla lunghezza libera
                If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
-                  ' Recupero sicurezza in corner interno
-                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-                  ' Recupero lunghezza baffo del taglio
-                  Dim nPvId As Integer = GDB_ID.NULL
-                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-                  Dim dDT As Double = 0
-                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
-                  dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  End If
                End If
 
                ' Modifica della lavorazione
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUeal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
@@ -1208,13 +1592,13 @@ Public Class SplitPageUC
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstMill Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
             ' Modifica della lavorazione
@@ -1228,7 +1612,7 @@ Public Class SplitPageUC
             ' se altrimenti getto d'acqua
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim dAddLen As Double = 0
                Dim LeadOutType As Integer = 0
@@ -1240,7 +1624,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LOTANG, nTangDist)
                EgtGetMachiningParam(MCH_MP.LOPERP, nPerpDist)
                ' Dialogo richiesta valore
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
                ModifStartWnd.SetElongation(dAddLen)
                ModifStartWnd.SetLeadOutType(LeadOutType)
                ModifStartWnd.SetLoTangDist(nTangDist)
@@ -1250,7 +1634,7 @@ Public Class SplitPageUC
                WJLeadOutType = ModifStartWnd.GetLeadOutType().Id
                nWJTangDist = ModifStartWnd.GetLoTangDist()
                nWJPerpDist = ModifStartWnd.GetLoPerpDist()
-               bFirstInd = False
+               bFirstWJ = False
             End If
 
             ' Modifica della lavorazione
@@ -1278,6 +1662,9 @@ Public Class SplitPageUC
    Private Sub InvertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InvertBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
          If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
@@ -1323,6 +1710,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          If GetPause(nOperId) Then
@@ -1349,6 +1739,16 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      If m_bShow Then
+         Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+         ' recupero l'operazione successiva
+         Dim NextDisposition As Integer = EgtGetNextOperation(CurrDisposition)
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage) Then
+            ' verifico che l'operazione sia una disposizione, altrimenti cerco
+            NextDisposition = m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage.GetNextDisposition(NextDisposition)
+            m_bOnAuxTab = m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage.IsDispUnloadOnAuxTab(NextDisposition)
+         End If
+      End If
       m_bToNext = True
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(m_MainWindow.m_CadCutPageUC.m_SplitPage)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage)
@@ -1420,8 +1820,37 @@ Public Class SplitPageUC
          ' assegno numerazione
          NumberDirectionMachining(nI)
       Next
+
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      Dim ActiveMachLst As New List(Of Integer)
+      For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+         ActiveMachLst.Add(ItemSplitMach.Ind)
+      Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+
       ' Preparo la lista degli Item
       ShowMachiningList()
+
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+
+      For Each Item As SplitMach In m_MachiningList
+         EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
+      Next
+
+      For nIndex As Integer = 0 To ActiveMachLst.Count - 1
+         For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+            If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
+               EgtRemoveInfo(m_MachiningList(ItemSplitMach.Ind).m_nId, INFO_MCH_USER_OFF)
+               m_MachiningList(ItemSplitMach.Ind).m_bEnabled = True
+               ItemSplitMach.bIsActive = True
+               ' sistemo colore
+               ColorMachining(m_MachiningList(ItemSplitMach.Ind))
+               Exit For
+            End If
+         Next
+      Next
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+
       ' Aggiorno visualizzazione
       EgtDraw()
       ' Aggiono abilitazione bottoni
@@ -1436,6 +1865,10 @@ Public Class SplitPageUC
    End Sub
 
    Friend Sub ExitSplit(Optional bTrueExit As Boolean = True)
+      DeselectWJBridgesPart()
+      BridgesWJBtn.IsChecked = False
+      BridgesDeleteWJBtn.IsChecked = False
+
       ' Rimuovo evidenziazione e numeri
       RemoveMarkAndNumbers()
       ' Ripristino colori lavorazioni
@@ -1547,7 +1980,7 @@ Public Class SplitPageUC
                m_bOnAuxTab = False
                ' Ci deve essere almeno 1 taglio disabilitato e 1 e 1 solo passante
                NextBtn.IsEnabled = (GetDisabledCutsCount() > 0 And GetSplitCutsCount() = 1)
-            ' Altrimenti
+               ' Altrimenti
             Else
                ' movimento standard sulla tavola (almeno un taglio disabilitato)
                Dim bStdTab As Boolean = (GetDisabledCutsCount() > 0)
@@ -1558,7 +1991,7 @@ Public Class SplitPageUC
                ' Deve essere permesso almeno un tipo di movimento
                NextBtn.IsEnabled = bStdTab Or m_bOnAuxTab Or bFinalMoveTab
             End If
-         ' altrimenti sto solo visualizzando
+            ' altrimenti sto solo visualizzando
          Else
             ' movimento su tavola di scarico
             m_bOnAuxTab = (m_nCurrPhase = EgtGetPhaseCount() - 1 And m_bEnableOnAuxTab And EgtGetOperationType(EgtGetLastOperation()) = MCH_OY.DISP)
@@ -1597,6 +2030,8 @@ Public Class SplitPageUC
       ModifEndBtn.IsEnabled = Not m_bShow
       InvertBtn.IsEnabled = Not m_bShow
       PauseBtn.IsEnabled = Not m_bShow And m_MainWindow.m_CurrentMachine.bEnablePause
+      BridgesWJBtn.IsEnabled = Not m_bShow
+      BridgesDeleteWJBtn.IsEnabled = Not m_bShow
 
       ' nascondo i comandi che non devono essere visualizzati in funzione delle lavorazioni attive
       If m_nCountSawing = 0 And (m_nCountWaterjetting > 0 Or m_nCountOtherMachining) Then
@@ -1645,8 +2080,40 @@ Public Class SplitPageUC
       End If
    End Sub
 
+   Private Function VerifyContinuity(ItemList As List(Of NameIdLsBxItem)) As Boolean
+      If ItemList.Count < 2 Then Return True
+      Dim bContigus As Boolean = False
+      For Index As Integer = 0 To ItemList.Count - 2
+         If ItemList(Index).Ind = ItemList(Index + 1).Ind + 1 Or ItemList(Index).Ind = ItemList(Index + 1).Ind - 1 Then
+            bContigus = True
+         Else
+            bContigus = False
+            Exit For
+         End If
+      Next
+      Return bContigus
+   End Function
+
+   Private Sub GetCurrSelection()
+      For Each Item As NameIdLsBxItem In m_ItemList
+         Item.IsSelected = False
+      Next
+      ' recupero il numero di elementi selezionati
+      Dim nCount As Integer = MachiningLsBx.SelectedItems.Count
+      For Index As Integer = 0 To nCount - 1
+         Dim Local_ItemTemplate As NameIdLsBxItem = MachiningLsBx.SelectedItems(Index)
+         For Each Item As NameIdLsBxItem In m_ItemList
+            If Item.Ind = Local_ItemTemplate.Ind Then
+               Item.IsSelected = True
+               Exit For
+            End If
+         Next
+      Next
+   End Sub
+
    Private Sub VisibilityButtonFromMachinig(ByVal Type As Integer)
       If Type <> MCH_OY.SAWING Then
+
          CutBtn.Visibility = Visibility.Hidden
          CutStartBtn.Visibility = Visibility.Hidden
          CutEndBtn.Visibility = Visibility.Hidden
@@ -1677,6 +2144,21 @@ Public Class SplitPageUC
          AllExtendBtn.Visibility = Visibility.Visible
          AllReduceBtn.Visibility = Visibility.Visible
       End If
+
+      ' gestione bottone per generazione ponticelli
+      If Type = MCH_OY.WATERJETTING Then
+         ' siccome la stessa posizione è occupata da due comandi sovrapposti
+         If CutStartBtn.Visibility = Visibility.Hidden Then
+            BridgesWJBtn.Visibility = Visibility.Visible
+            BridgesDeleteWJBtn.Visibility = Visibility.Visible
+         Else
+            BridgesWJBtn.Visibility = Visibility.Hidden
+            BridgesDeleteWJBtn.Visibility = Visibility.Hidden
+         End If
+      Else
+         BridgesWJBtn.Visibility = Visibility.Hidden
+         BridgesDeleteWJBtn.Visibility = Visibility.Hidden
+      End If
    End Sub
 
    Private Function ModifyOtherLeadIn(nI As Integer, nLiOthType As Integer) As Boolean
@@ -1721,6 +2203,15 @@ Public Class SplitPageUC
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv( m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -1775,6 +2266,36 @@ Public Class SplitPageUC
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection( ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos( 30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin( 30 * Math.PI / 180)
@@ -1854,7 +2375,10 @@ Public Class SplitPageUC
       EgtDisableModified()
       ' cancello evidenziazione
       If m_CurrFirstInd >= 0 Then
-         For Index As integer = m_CurrFirstInd To m_CurrLastInd
+         For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+            If Not m_ItemList(Index).IsSelected Then
+               Continue For
+            End If
             MarkMachining(m_ItemList(Index).Ind, False)
          Next
          m_CurrFirstInd = -1
@@ -1913,6 +2437,8 @@ Public Class SplitPageUC
       Private m_bIsActive As Boolean
       Private m_nType As Integer
 
+      Private m_IsSelected As Boolean
+
       Public Property Ind As Integer
          Get
             Return m_nInd
@@ -1955,6 +2481,15 @@ Public Class SplitPageUC
          End Set
       End Property
 
+      Public Property IsSelected As Boolean
+         Get
+            Return m_IsSelected
+         End Get
+         Set(value As Boolean)
+            m_IsSelected = value
+         End Set
+      End Property
+
       Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer)
          Me.m_sName = Name
          Me.m_nInd = Ind

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -8,7 +9,24 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -48,6 +66,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -64,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -74,6 +108,11 @@ Module VacuumCups
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -160,6 +199,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -182,6 +233,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -261,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -289,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -363,6 +417,26 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +448,30 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
+         Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+            ' se l'orientamento è verticale
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -430,13 +523,55 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
+      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -457,6 +592,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -92,6 +92,10 @@ Module ConstGen
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -145,6 +149,9 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -180,6 +187,8 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -205,7 +214,8 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
-   Public CONST INFO_AGG2 As String = "Agg2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -295,6 +305,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"
@@ -327,6 +343,11 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -370,6 +391,9 @@ Module ConstGen
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -46,6 +47,10 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -129,7 +134,9 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -137,6 +144,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"
@@ -148,6 +156,8 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -163,6 +173,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -209,6 +227,15 @@ Module ConstIni
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
+   Public Const S_SCRAPS As String = "Scraps"
+   Public Const K_ENABLESCRAPS As String = "EnableScraps"
+   Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_LASTBLOCK As String = "LastBlock"
+   Public Const K_TEMPLATE As String = "Template"
+   Public Const K_DAT As String = "Dat"
+   Public Const K_ZEBRAUTILITIES As String = "ZebraUtilities"
+   Public Const K_ENABLE_PRINTER As String = "EnablePrinter"
+
    Public Const S_REG As String = "Reg"
    Public Const K_REGSTEP As String = "Step"
    Public Const K_REGANGSTEP As String = "AngStep"

Constants/ConstKitData.vb

@@ -11,9 +11,18 @@
    Public Const K_ZIGZAGX As String = "ZigZagX"
    Public Const K_OFFZIGZAGX As String = "OffZigZagX"
    Public Const K_STEPX As String = "StepX"
+   Public Const K_RADIUSX As String = "RadiusX"
+   Public Const K_DISTANCEX As String = "DistanceX"
    Public Const K_ZIGZAGY As String = "ZigZagY"
    Public Const K_OFFZIGZAGY As String = "OffZigZagY"
    Public Const K_STEPY As String = "StepY"
+   Public Const K_RADIUSY As String = "RadiusY"
+   Public Const K_DISTANCEY As String = "DistanceY"
+   Public Const K_SPIRAL As String = "Spiral"
+   Public Const K_OFFSPIRAL As String = "OffSpiral"
+   Public Const K_STEPSPIRAL As String = "StepSpiral"
+   Public Const K_RADIUSSPIRAL As String = "RadiusSpiral"
+   Public Const K_DISTANCESPIRAL As String = "DistanceSpiral"
    Public Const K_LILEN As String = "LiLen"
    Public Const K_LIHEIGHT As String = "LiHeight"
    Public Const K_LILOAD As String = "LiLoad"

Constants/ConstMachIni.vb

@@ -46,6 +46,11 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_DIRSCRIPT_LUA As String = "DirScript"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
+   Public Const K_CALLFUNCTION As String = "CallFunction"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -78,6 +83,8 @@
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
+   Public Const K_ENABLEZONE As String = "EnableZone"
+   Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
@@ -226,6 +233,13 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
+
+   Public Const K_ISNEWSCRAPS As String = "IsNewScraps"
+   Public Const K_DATABASEID As String = "DatabaseID"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -249,6 +263,7 @@
 
    Public Const S_MACH_INPROGRESS As String = "InProgress"
    Public Const K_PHASEVAR As String = "PhaseVar"
+   Public Const K_WP_STEPTIME As String = "WPStepTime"
 
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
@@ -287,5 +302,6 @@
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
    Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -342,6 +342,37 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+   Friend Sub ZoneStateChanged(ZoneState As Integer)
+      'Dim sFlag As String = String.Empty
+      'If ZoneState = 1 Then
+      '   sFlag = BTN_ENABLE_ZONE_1
+      'ElseIf ZoneState = 2 Then
+      '   sFlag = BTN_ENABLE_ZONE_2
+      'End If
+      'Dim EnableZoneButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEZONE Then
+      '      EnableZoneButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnableZoneButton) Then
+      '   EnableZoneButton.SetIsChecked(EnableZone)
+      'End If
+   End Sub
+
+   Friend Sub PcStateChanged(EnablePC As Boolean)
+      'Dim EnablePCButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEPC Then
+      '      EnablePCButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnablePCButton) Then
+      '   EnablePCButton.SetIsChecked(EnablePC)
+      'End If
+   End Sub
+
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,
@@ -414,6 +445,8 @@ Public MustInherit Class MachineButton
    Friend Const BTN_STATE_THREEAXIS As String = "ThreeAxis"
    Friend Const BTN_STATE_FIVEAXIS As String = "FiveAxis"
    Friend Const BTN_STATE_NOTHING As String = "Nothing"
+   Friend Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Friend Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
 
    ' Dichiarazione delle Page UserControl
    Friend Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)

DirectCuts/DirectCutPageUC.xaml

@@ -201,8 +201,9 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
             <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="4*"/>
+            <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
 
@@ -239,9 +240,17 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
+
+         <!--Parking-->
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+             <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+            <!--Comando Manula/MDI-->
          <Button Name="ManualModeBtn" Grid.Column="8"
-               Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -257,6 +257,7 @@ Public Class DirectCutPageUC
       ZCBtn.Visibility = Visibility.Collapsed
       ZBBtn.Visibility = Visibility.Collapsed
       RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
 
       Dim Item As MachineButton = Nothing
       For Each Item In m_ButtonJogList
@@ -277,6 +278,10 @@ Public Class DirectCutPageUC
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
                RemoteBtn.Content = "Remote"
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = "Parking"
          End Select
       Next
    End Sub
@@ -513,6 +518,43 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      ParkingButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then

DirectCuts/FlatteningCut.xaml.vb

@@ -66,6 +66,7 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
       m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
@@ -614,9 +615,11 @@ Public Class FlatteningCut
 
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
+      ' vedere nella pagina Allarm il capito "Incisioni"
+      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
-      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) Then
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -644,13 +647,17 @@ Public Class FlatteningCut
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
       Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' EgtSetName(nLayerId, NAME_OUTLOOP)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
+      End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)

DirectCuts/MachineButtonsUC.xaml

@@ -19,7 +19,8 @@
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
-      </Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
 
       <ToggleButton Name="MachineButton1" Grid.Column="0" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
          <Image Name="ImageButton1" Style="{StaticResource OmagCut_ButtonIcon}"/>
@@ -61,6 +62,10 @@
          <Image Name="ImageButton10" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-   </Grid>
+        <ToggleButton Name="MachineButton11" Grid.Column="10" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+            <Image Name="ImageButton11" Style="{StaticResource OmagCut_ButtonIcon}"/>
+        </ToggleButton>
+
+    </Grid>
 
 </UserControl>

DirectCuts/MachineButtonsUC.xaml.vb

@@ -10,7 +10,8 @@ Public Class MachineButtonsUC
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
-   Private Const MAX_BUTTONS As Integer = 10
+   ' 9/2 aggiunto spazio per un nuovo bottone
+   Private Const MAX_BUTTONS As Integer = 11
    Private m_nCount As Integer = 0
    Private ImageArrayY(MAX_BUTTONS - 1) As String
    Private ImageArrayN(MAX_BUTTONS - 1) As String
@@ -32,6 +33,9 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Private Const BTN_ENABLE_PC As String = "EnablePC"
 
    Public Sub New(Optional bOnlyLaser As Boolean = False)
       ' This call is required by the designer.
@@ -76,7 +80,10 @@ Public Class MachineButtonsUC
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
-            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED Then
+            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_PC OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_1 OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_2 Then
             ' mostra immagine fissa
             Try
                Dim s As String
@@ -135,7 +142,8 @@ Public Class MachineButtonsUC
    End Sub
 
    Private Sub MachineButton_Click(sender As Object, e As RoutedEventArgs) Handles MachineButton1.Click, MachineButton2.Click, MachineButton3.Click, MachineButton4.Click, MachineButton5.Click,
-                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click
+                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click,
+                                                                                   MachineButton11.Click
       Dim CurrentBtn As Primitives.ToggleButton = e.Source
       ' recupero l'inidce del bottone selezionato
       Dim nIndex As Integer = GetToggleButtonIndex(CurrentBtn) - 1
@@ -154,6 +162,18 @@ Public Class MachineButtonsUC
          Return
       End If
 
+      ' Se il bottone chiamantè quello per la selezione del pannello di controllo
+      If nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC) Then
+         Dim sTLuaFile As String = sBaseDir & CommandArrayY(nIndex)
+         Dim sFLuaFile As String = sBaseDir & CommandArrayN(nIndex)
+         If m_CN.nEnablePc = 1 Then
+            ExecuteMDICommand(CurrentBtn, sTLuaFile)
+         ElseIf m_CN.nEnablePc = 2 Then
+            ExecuteMDICommand(CurrentBtn, sFLuaFile)
+         End If
+         Return
+      End If
+
       If CurrentBtn.IsChecked() Then
          'EgtLuaExecFile(sBaseDir & CommandArrayY(nIndex))
          sLuaFileName = sBaseDir & CommandArrayY(nIndex)
@@ -620,6 +640,169 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub EnableZoneStateChanged(ZoneState As Integer)
+      Dim sFlag As String = String.Empty
+      If ZoneState = 1 Then
+         sFlag = BTN_ENABLE_ZONE_1
+      ElseIf ZoneState = 2 Then
+         sFlag = BTN_ENABLE_ZONE_2
+      End If
+      ' recupero il bottone che deve essere acceso (quindi spengo l'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, sFlag)
+
+      ' se non trovo nessun riferimento allora spengo entrambi i comandi
+      If nIndex = -1 Then
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Return
+      End If
+
+      If ZoneState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+
+      ElseIf ZoneState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub EnablePcStateChanged(PcState As Integer)
+      ' il comando ButtonY accendo il Pannello_1, il comando ButtonN accendo il Pannello_2 (uno è la negazione dell'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC)
+      If nIndex = -1 Then Return
+      If PcState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      ElseIf PcState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      Else
+         ' nessuno dei due pannelli attivo
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub TableUpChanged(TableUpState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEUP)
+      If nIndex = -1 Then Return
+      If TableUpState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub TableDownChanged(TableDownState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEDOWN)
+      If nIndex = -1 Then Return
+      If TableDownState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
    Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
@@ -659,76 +842,82 @@ Public Class MachineButtonsUC
 
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
-      Case 1
-         Return MachineButton1
-      Case 2
-         Return MachineButton2
-      Case 3
-         Return MachineButton3
-      Case 4
-         Return MachineButton4
-      Case 5
-         Return MachineButton5
-      Case 6
-         Return MachineButton6
-      Case 7
-         Return MachineButton7
-      Case 8
-         Return MachineButton8
-      Case 9
-         Return MachineButton9
-      Case Else
-         Return MachineButton10
+         Case 1
+            Return MachineButton1
+         Case 2
+            Return MachineButton2
+         Case 3
+            Return MachineButton3
+         Case 4
+            Return MachineButton4
+         Case 5
+            Return MachineButton5
+         Case 6
+            Return MachineButton6
+         Case 7
+            Return MachineButton7
+         Case 8
+            Return MachineButton8
+         Case 9
+            Return MachineButton9
+         Case 10
+            Return MachineButton10
+         Case Else
+            Return MachineButton11
       End Select
    End Function
 
    Private Function GetToggleButtonIndex(ByVal nBtnName As Primitives.ToggleButton) As Integer
       Select Case nBtnName.Name
-      Case MachineButton1.Name
-         Return 1
-      Case MachineButton2.Name
-         Return 2
-      Case MachineButton3.Name
-         Return 3
-      Case MachineButton4.Name
-         Return 4
-      Case MachineButton5.Name
-         Return 5
-      Case MachineButton6.Name
-         Return 6
-      Case MachineButton7.Name
-         Return 7
-      Case MachineButton8.Name
-         Return 8
-      Case MachineButton9.Name
-         Return 9
-      Case Else
-         Return 10
+         Case MachineButton1.Name
+            Return 1
+         Case MachineButton2.Name
+            Return 2
+         Case MachineButton3.Name
+            Return 3
+         Case MachineButton4.Name
+            Return 4
+         Case MachineButton5.Name
+            Return 5
+         Case MachineButton6.Name
+            Return 6
+         Case MachineButton7.Name
+            Return 7
+         Case MachineButton8.Name
+            Return 8
+         Case MachineButton9.Name
+            Return 9
+         Case MachineButton10.Name
+            Return 10
+         Case Else
+            Return 11
       End Select
    End Function
 
    Private Function GetImage(ByVal nInd As Integer) As Image
       Select Case nInd
-      Case 1
-         Return ImageButton1
-      Case 2
-         Return ImageButton2
-      Case 3
-         Return ImageButton3
-      Case 4
-         Return ImageButton4
-      Case 5
-         Return ImageButton5
-      Case 6
-         Return ImageButton6
-      Case 7
-         Return ImageButton7
-      Case 8
-         Return ImageButton8
-      Case 9
-         Return ImageButton9
-      Case Else
-         Return ImageButton10
+         Case 1
+            Return ImageButton1
+         Case 2
+            Return ImageButton2
+         Case 3
+            Return ImageButton3
+         Case 4
+            Return ImageButton4
+         Case 5
+            Return ImageButton5
+         Case 6
+            Return ImageButton6
+         Case 7
+            Return ImageButton7
+         Case 8
+            Return ImageButton8
+         Case 9
+            Return ImageButton9
+         Case 10
+            Return ImageButton10
+         Case Else
+            Return ImageButton11
       End Select
    End Function
 

DrawImport/AlzFrontUC.xaml.vb

@@ -76,9 +76,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
-      Parameter5TxBl.Text = "Spessore"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub

DrawImport/CompoDimensionUC.xaml.vb

@@ -336,6 +336,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -379,5 +380,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/CompoTrfData.xaml.vb

@@ -24,6 +24,7 @@ Public Class CompoTrfData
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +33,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -64,7 +64,7 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
             
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
                <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>

DrawImport/DrawPageUC.xaml.vb

@@ -41,6 +41,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -360,6 +363,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -462,21 +467,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -484,6 +493,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -882,7 +893,7 @@ Public Class DrawPageUC
 
    ' permette di inserire più di un part
    Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
-      
+
       Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
 
       ' Imposto il contesto corrente
@@ -893,6 +904,9 @@ Public Class DrawPageUC
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(DrawScene.GetCtx())
@@ -1040,6 +1054,11 @@ Public Class DrawPageUC
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -1054,7 +1073,13 @@ Public Class DrawPageUC
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
 
                ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
@@ -1148,8 +1173,10 @@ Public Class DrawPageUC
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1228,6 +1255,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1259,6 +1288,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)
@@ -1348,6 +1378,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1361,25 +1393,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True

DrawImport/FiloTopUC.xaml

@@ -41,7 +41,11 @@
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
-   </Grid>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Center" Margin="0,0,6,0"/>
+    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,6 +25,13 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
@@ -43,14 +52,18 @@ Public Class FiloTopUC
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
       m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
       ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
       m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -74,6 +87,8 @@ Public Class FiloTopUC
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -95,4 +110,161 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+               nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/ImportPageUC.xaml

@@ -49,15 +49,28 @@
             <Grid.RowDefinitions>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="8*"/>
+               <RowDefinition Height="7.25*"/>
+               <RowDefinition Height="0.75*"/>
                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-                ItemsSource="{Binding ItemList}"/>
+                     ItemsSource="{Binding ItemList}"/>
 
-            <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <Grid Grid.Row="3" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid> 
+            
+            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
                <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Border>

DrawImport/ImportPageUC.xaml.vb

@@ -297,6 +297,36 @@ Public Class ImportPageUC
       End Select
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -808,6 +838,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -817,26 +851,54 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -845,7 +907,7 @@ Public Class ImportPageUC
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
@@ -856,6 +918,7 @@ Public Class ImportPageUC
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL
@@ -868,26 +931,26 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
@@ -907,7 +970,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

DrawImport/SideAngleUc.xaml

@@ -5,7 +5,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+   d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -28,7 +28,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
@@ -135,7 +135,7 @@
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
           <Grid.ColumnDefinitions>
                 <ColumnDefinition Width="1.5*"/>
                 <ColumnDefinition Width="0.3*"/>
@@ -143,10 +143,11 @@
                 <ColumnDefinition Width="0.6*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
@@ -196,6 +197,16 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+               Text="Angolo"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
         </Grid>
 
         <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"

DrawImport/SideAngleUc.xaml.vb

@@ -34,7 +34,9 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -105,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -116,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -130,12 +137,33 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 9)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -156,12 +184,14 @@ Public Class SideAngleUC
          m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = LenToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -489,7 +519,9 @@ Public Class SideAngleUC
          WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
@@ -635,7 +667,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -830,6 +862,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -840,10 +875,16 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -863,14 +904,70 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1304,11 +1401,25 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub
 

EgtDictionary.xaml

@@ -1,16 +1,48 @@
-<ResourceDictionary
-   x:Class="EgtDictionary"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:Project="clr-namespace:OmagCUT"
-   xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
+<ResourceDictionary x:Class="EgtDictionary"
+                    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                    xmlns:Project="clr-namespace:OmagCUT"
+                    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                    xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+                    xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+                    xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
 
-   <!--Template che permette di andare a capo-->
+    <EgtWPFLib5:StatusBarVM x:Key="StatusBarVM"/>
+    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
+    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
+    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+
+    <EgtPHOTOLib:ProjectSlabVM x:Key="ProjectSlabVM"/>
+    <EgtPHOTOLib:OptionPanelSlabVM x:Key="OptionPanelSlabVM"/>
+    <EgtPHOTOLib:ListPageSlabVM x:Key="ListPageSlabVM"/>
+    <EgtPHOTOLib:DetailPageSlabVM x:Key="DetailPageSlabVM"/>
+    <EgtPHOTOLib:SearchPanelSlabVM x:Key="SearchPanelSlabVM"/>
+    <EgtPHOTOLib:MyInstrumentPanelSlabVM x:Key="MyInstrumentPanelSlabVM"/>
+
+    <!--Colori predefiniti-->
+    <SolidColorBrush x:Key="Omag_Blue" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="Omag_Yellow" Color="#FFFFCE5B" />
+    <SolidColorBrush x:Key="Omag_Red" Color="Red" />
+    <SolidColorBrush x:Key="Omag_Green" Color="LawnGreen" />
+    <SolidColorBrush x:Key="Omag_VeryLightGray" Color="#FFF2F2F2" />
+    <SolidColorBrush x:Key="Omag_LightGray" Color="LightGray" />
+    <SolidColorBrush x:Key="Omag_Gray" Color="#FF9E9E9E" />
+    <SolidColorBrush x:Key="Omag_DarkGray" Color="#FF444444" />
+    <SolidColorBrush x:Key="Omag_White" Color="#FFFFFFFF" />
+    <SolidColorBrush x:Key="Omag_Black" Color="#FF000000" />
+
+    <SolidColorBrush x:Key="EgaltechBlue1" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="EgaltechWhite" Color="#FFFFFFFF" />
+
+    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="Button_DataTemplate_Wrap">
       <TextBlock TextWrapping="Wrap" Text="{Binding}"/>
    </DataTemplate>
 
-   <!--ButtonBase-->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- Button Style -->
+
    <Style TargetType="{x:Type Button}">
       <Setter Property="FocusVisualStyle">
          <Setter.Value>
@@ -71,7 +103,44 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Template che permette di andare a capo-->
+    <DataTemplate x:Key="WrapButton_DataTemplate">
+        <TextBlock TextWrapping="WrapWithOverflow" Text="{Binding}"/>
+    </DataTemplate>
+
+    <Style x:Key="ToolBar_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+    <Style x:Key="ToolBar_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="80"/>
+    </Style>
+    <Style x:Key="OptionPanel_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextWrapButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Setter Property="Height" Value="45"/>
+    </Style>
+    <Style x:Key="OptionPanel_NestingButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="CompoWindow_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+    <Style x:Key="EgtWPFLib5_InputButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="CheckBox_DataTemplate_Wrap">
@@ -375,7 +444,59 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <Style x:Key="ToolBar_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+
+    <Style x:Key="ToolBar_TextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="70"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_WrapToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center" />
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="Option_ColorButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Padding" Value="5"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Style.Triggers>
+            <Trigger Property="IsMouseOver" Value="True">
+                <Setter Property="Background" Value="#FFB8C3CD"/>
+            </Trigger>
+            <Trigger Property="IsPressed" Value="True">
+                <Setter Property="OpacityMask" Value="#33FF0000"/>
+            </Trigger>
+            <Trigger Property="ToggleButton.IsChecked" Value="True">
+                <Setter Property="Background" Value="Transparent"/>
+            </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Background" Value="#FFF4F4F4"/>
+                <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+                <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+            </Trigger>
+        </Style.Triggers>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TreeViewBase-->
    <!--Style e colori della freccia di espansione, necessari per modificare il ContainerItemStyle perchè contiene riferimenti ad essi-->
@@ -431,6 +552,32 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtCustomWindow -->
+
+    <Style TargetType="{x:Type EgtWPFLib5:EgtCustomWindow}" BasedOn="{StaticResource {x:Type EgtWPFLib5:EgtCustomWindow}}">
+        <Setter Property="TitleBarHeight" Value="32"/>
+        <Setter Property="TitleBarBrush" Value="{StaticResource Omag_LightGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtFloatingPanel -->
+
+    <Style x:Key="ToolBar_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <Style x:Key="Option_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="IsToolBar" Value="False"/>
+        <Setter Property="TitleBarOrientation" Value="Vertical"/>
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
 </ResourceDictionary>

Machine/AlarmsPageUC.xaml

@@ -801,19 +801,23 @@
             <Grid Grid.Column="0" Grid.Row="8">
                 <Grid.ColumnDefinitions>
                     <ColumnDefinition Width="2.5*"/>
-                    <ColumnDefinition Width="5*"/>
-                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="2.5*"/>
+                    <ColumnDefinition Width="4.5*"/>
+                    <ColumnDefinition Width="1.8*"/>
                 </Grid.ColumnDefinitions>
                 <Button x:Name="SawProbingBtn"
-         	   Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                     <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
                 </Button>
+                <Button x:Name="ExecLuaBtn" Grid.Column="1"
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                    <Image Source="{DynamicResource PlayImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+                </Button>
 
-                
-                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="1"
+                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="2"
-                  HorizontalAlignment="Right" Margin="10,0,10,0"/>
+                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="3"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
             </Grid>
             
         </Grid>

Machine/AlarmsPageUC.xaml.vb

@@ -45,6 +45,13 @@ Public Class AlarmsPageUC
          SawProbingBtn.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' Se esiste un file lua valido allora mostro il pulsante per l'esecuzione dello script
+      If Not String.IsNullOrEmpty(GetExecLuaFile()) And
+         ExecLuaBtn.Visibility = Visibility.Visible Then
+      Else
+         ExecLuaBtn.Visibility = Visibility.Hidden
+      End If
+
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
@@ -578,6 +585,33 @@ Public Class AlarmsPageUC
          String.Compare(sMchTool, m_CurrentMachine.sCurrSaw, True) <> 0 Then
          m_CurrentMachine.sCurrSawing = String.Empty
       End If
+
+      'Dim sVal As String = String.Empty
+      'Dim dVal As Double = 0
+      'If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevLength(dVal)
+      'End If
+      'If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevPerc(dVal)
+      'End If
+
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevLength(dVal)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevPerc(dVal)
+      End If
+
+      ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
@@ -1300,4 +1334,53 @@ Public Class AlarmsPageUC
 
    End Sub
 
+   Private Sub ExecLuaBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExecLuaBtn.Click
+      Dim sExecFile As String = GetExecLuaFile()
+      Dim sCallFunction As String = GetCallFunction()
+      ' Recupero file LUA
+      Dim bExec As Boolean = EgtLuaExecFile(sExecFile)
+      ' Lancio l'esecuzione della funzione principale
+      bExec = bExec And EgtLuaCallFunction(sCallFunction)
+      ' Leggo variabili
+      Dim nErr As Integer = 0
+      EgtLuaGetGlobIntVar("CMD.ERR", nErr)
+      ' Reset lua
+      EgtLuaResetGlobVar("CMD")
+      ' Verifico condizioni di errore
+      If nErr <> 0 And bExec Then
+         ' Errore in tastatura lama
+         EgtOutLog("Error in execution file: " & sExecFile & ", calling function: " & sCallFunction & ", CMD.ERR=" & nErr, ToString)
+         Return
+      End If
+   End Sub
+
+   ' Recupero il percorso del file lua da eseguire
+   Private Function GetExecLuaFile() As String
+      Dim sDir As String = String.Empty
+      Dim sFile As String = String.Empty
+      If GetPrivateProfileString(S_EXECLUA, K_DIRSCRIPT_LUA, "", sDir, m_MainWindow.GetMachIniFile()) <> 0 And
+         GetPrivateProfileString(S_EXECLUA, K_FILESCRIPT_LUA, "", sFile, m_MainWindow.GetMachIniFile()) <> 0 Then
+         ' Formatto le stringhe lette
+         sDir = sDir.Trim
+         sFile = sFile.Trim
+         If sDir.EndsWith("\"c) Then
+            sDir = sDir.Remove(sDir.LastIndexOf("\"c))
+         End If
+         If Not sFile.EndsWith(".lua") Then
+            sFile = sFile & ".lua"
+         End If
+         If File.Exists(sDir & "\" & sFile) Then
+            Return sDir & "\" & sFile
+         End If
+      End If
+      Return String.Empty
+   End Function
+
+   ' Recupera il nome della funzione che deve essere chiamata
+   Private Function GetCallFunction() As String
+      Dim sCallFunction As String = "CMD.CmdString"
+      GetPrivateProfileString(S_EXECLUA, K_CALLFUNCTION, sCallFunction, sCallFunction, m_MainWindow.GetMachIniFile())
+      Return sCallFunction
+   End Function
+
 End Class

Machine/CurrentMachine.vb

@@ -609,6 +609,18 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
+            'Dim sVal As String = String.Empty
+            'Dim dVal As Double = m_dFsevLength
+            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, dVal)
+            '   SetFsevLength(dVal)
+            'End If
+            'dVal = m_dFsevPerc
+            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, m_dFsevPerc)
+            '   SetFsevPerc(dVal)
+            'End If
          End If
       End Set
    End Property
@@ -752,6 +764,7 @@ Public Class CurrentMachine
          End Select
       End Get
       Set(value As Double)
+         Dim dValue As Double = 0
          Select Case GetCurrentTable()
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
@@ -760,14 +773,24 @@ Public Class CurrentMachine
                   m_dTab3AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
                End If
-            Case 2
+                  Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
                   m_dTab2AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, value)
+                  End If
                End If
             Case Else
                If Math.Abs(value - m_dAdditionalTable) > EPS_SMALL And
@@ -776,6 +799,11 @@ Public Class CurrentMachine
                   m_dAdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, value)
+                  End If
                End If
          End Select
       End Set
@@ -845,9 +873,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevLength = value
+            ' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevLength", m_dFsevLength.ToString, sCurrSawing, false)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevLength", m_dFsevLength.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevLength(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevLength = value
+      End If
+   End Sub
 
    Friend Property dFsevPerc As Double
       Get
@@ -856,9 +893,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevPerc = value
+            '' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSawing)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevPerc(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevPerc = value
+      End If
+   End Sub
 
    Friend ReadOnly Property ToolChangerNbr As Integer
       Get
@@ -1249,6 +1295,7 @@ Public Class CurrentMachine
 
       ' Leggo dati per feed ridotta all'inizio/fine dei tagli
       m_bFsevEnable = (GetPrivateProfileInt(S_NEST, K_MACH_CUTFSEVENABLE, 0, sMachIniFile) <> 0)
+      ' sposto la lettura nel DB delle lavorazioni della lama corrente!
       m_dFsevLength = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVLEN, 0, sMachIniFile)
       m_dFsevPerc = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVPERC, 0, sMachIniFile)
 
@@ -1311,7 +1358,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità (solo se è vuota)
       If m_Qualities.Count < 1 Then
          m_Qualities.Add("Q1")
@@ -1342,7 +1389,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       Dim sItems() As String = sCurMat.Split("."c)
       If sItems.Count > 1 Then
          Dim sMat As String = sItems(0)
@@ -1370,6 +1417,142 @@ Public Class CurrentMachine
       Return dMaxThick
    End Function
 
+#Region "USERNOTE"
+
+   ' recupero le note UserNote associate alla LAVORAZIONE Machining
+   Friend Function MdbGetCurrMachiningUserNote(Machining As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtMdbGetCurrMachiningParam(MCH_MP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+      Return UserNotes
+   End Function
+
+   ' recupero le note UserNote associate all'UTENSILE Tool
+   Friend Function TdbGetCurrToolUserNote(Tool As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(CurrTool)
+      End If
+      Return UserNotes
+   End Function
+
+   ' imposta il nuovo valore in UserNote della LAVORAZIONE Machining
+   Friend Sub MdbSetCurrMachiningUserNote(sKeyUserNote As String, sValUserNote As String, Machining As String)
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtMdbSetCurrMachiningParam(MCH_MP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Machining))
+         EgtMdbSaveCurrMachining()
+         EgtMdbSave()
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+   End Sub
+
+   ' imposta il nuovo valore in UserNote dell'UTENSILE Tool
+   Friend Sub TdbSetCurrToolUserNote(sKeyUserNote As String, sValUserNote As String, Tool As String)
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Tool))
+         EgtTdbSaveCurrTool()
+         EgtTdbSave()
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(Tool)
+      End If
+   End Sub
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteMachinig(Machining As String) As String()
+      Dim sUserNotes As String = MdbGetCurrMachiningUserNote(Machining)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteTool(Tool As String) As String()
+      Dim sUserNotes As String = TdbGetCurrToolUserNote(Tool)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' recupera il valore della associato alla chiave per la lavorazione oppure utensile (bIsToolNote)
+   Friend Function GetUserNote(sKeyUserNote As String, ByRef sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As Boolean
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      If IsNothing(sUserNotesList) Then Return False
+      For Index As Integer = 0 To sUserNotesList.Count - 1
+         Dim sNote As String() = sUserNotesList(Index).Split("="c)
+         If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+            sValUserNote = sNote(1).Trim
+         End If
+      Next
+      Return True
+   End Function
+
+   ' ricostruisce la stringa UserNote da salvare
+   Friend Function AssembUserNote(sKeyUserNote As String, sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As String
+      Dim sUserNotes As String = String.Empty
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      Dim bExists As Boolean = False
+      If Not IsNothing(sUserNotesList) Then
+         For Index As Integer = 0 To sUserNotesList.Count - 1
+            Dim sNote As String() = sUserNotesList(Index).Split("="c)
+            If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+               sUserNotesList(Index) = sKeyUserNote & "=" & sValUserNote
+               bExists = True
+               Exit For
+            End If
+         Next
+         ' riassemblo la stringa
+         For Each Item As String In sUserNotesList
+            If Not String.IsNullOrWhiteSpace(Item) Then
+               sUserNotes &= Item & ";"
+            End If
+         Next
+      End If
+      If Not bExists Then
+         sUserNotes &= sKeyUserNote & "=" & sValUserNote & ";"
+      End If
+      Return sUserNotes
+   End Function
+
+#End Region    ' USERNOTE
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)

Machine/MachinePageUC.xaml.vb

@@ -145,12 +145,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                AlarmsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -215,12 +215,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.WaterJet
             'Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                ToolsDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -285,12 +285,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                MachiningDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -358,12 +358,12 @@ Public Class MachinePageUC
             PolishingsBtn.IsChecked = True
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                PolishingsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -513,12 +513,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                TestingPageBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -593,12 +593,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                StatisticsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina

Machine/MachiningDbPageUC.xaml.vb

@@ -339,7 +339,7 @@ Public Class MachiningDbPageUC
          Next
          MachiningToExportList.Add(ImpExpMachiningFamily)
       Next
-      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList)
+      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList, true)
       Dim ExportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ExportWndVM)
 
       ExportWnd.ShowDialog()
@@ -396,7 +396,7 @@ Public Class MachiningDbPageUC
             MachinigToImportList.Add(NewFamily)
          End If
       Next
-      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, ImportFilePath, ImportFileMachiningNameList)
+      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, False, ImportFilePath, ImportFileMachiningNameList)
       Dim ImportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ImportWndVM)
 
       ImportWnd.ShowDialog()

Machine/PolishingsPageUC.xaml

@@ -158,6 +158,9 @@
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                
                             </Grid.ColumnDefinitions>
                             <Grid.RowDefinitions>
                                 <RowDefinition Height="0.5*"/>
@@ -165,10 +168,12 @@
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
                                 <RowDefinition Height="0.5*"/>
 
                             </Grid.RowDefinitions>
 
+                    <!--Decrizione immagini-->        
                     <Border Grid.Row="1" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/Contour.png" Stretch="Uniform"/>
                     </Border>
@@ -178,24 +183,45 @@
                     <Border Grid.Row="3" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/ZigZagY.png" Stretch="Uniform"/>
                     </Border>
+                    <Border Grid.Row="4" Grid.Column="1" Margin="10">
+                        <Image Source="../Resources/Spiral.png" Stretch="Uniform"/>
+                    </Border>
 
-                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
+                            <!--Titolazione colonne-->
+                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RadiusTxBl" Grid.Row="0" Grid.Column="5" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="DistanceTxBl" Grid.Row="0" Grid.Column="6" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
 
-                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Contornatura-->
+                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             
-                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-
-                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Cammino orizzontale X-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusXTxBx" Grid.Row="2" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceXTxBx" Grid.Row="2" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
                             
-                    <GroupBox Name="LiLoGpBx" Grid.Row="4" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="3" Style="{DynamicResource OmagCut_GroupBox}">
+                    <!--Cammino verticale Y-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusYTxBx" Grid.Row="3" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceYTxBx" Grid.Row="3" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                            
+                    <!--Cammino a spirale-->
+                    <EgtWPFLib:EgtTextBox Name="SpiralTxBx" Grid.Row="4" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepSpiralTxBx" Grid.Row="4" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffSpiralTxBx" Grid.Row="4" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusSpiralTxBx" Grid.Row="4" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceSpiralTxBx" Grid.Row="4" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+
+                            <!--Parametri di lavoro condivisi-->
+                    <GroupBox Name="LiLoGpBx" Grid.Row="5" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="5" Style="{DynamicResource OmagCut_GroupBox}">
                         <Grid Name="LiLoGrd">
                             <Grid.ColumnDefinitions>
                                 <ColumnDefinition Width="2*"/>
@@ -212,11 +238,11 @@
                            </Grid.RowDefinitions>
 
                             <TextBlock Name="LiLenTxBl" Grid.Row="1" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiHeightTxBl" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiLoadTxBl" Grid.Row="3" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
 
                         </Grid>
                     </GroupBox>

Machine/PolishingsPageUC.xaml.vb

@@ -61,6 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
+      RadiusTxBl.Text = "Raggio"
+      DistanceTxBl.Text = "Distanza"
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza
@@ -452,7 +454,9 @@ Public Class PolishingsPageUC
                   If KitMachItem.m_IsModifiedId OrElse KitMachItem.m_IsModifiedToolUUID OrElse KitMachItem.m_IsModifiedToolName OrElse KitMachItem.m_IsModifiedSelTool OrElse
                      KitMachItem.m_IsModifiedActive OrElse KitMachItem.m_IsModifiedContour OrElse KitMachItem.m_IsModifiedOffCnt OrElse KitMachItem.m_IsModifiedZigZagX OrElse
                      KitMachItem.m_IsModifiedOffZigZagX OrElse KitMachItem.m_IsModifiedZigZagY OrElse KitMachItem.m_IsModifiedStepX OrElse KitMachItem.m_IsModifiedStepY OrElse
-                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse KitMachItem.m_IsModifiedLiLoad Then
+                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedSpiral OrElse KitMachItem.m_IsModifiedOffSpiral OrElse KitMachItem.m_IsModifiedStepSpiral OrElse
+                     KitMachItem.m_IsModifiedRadiusSpiral OrElse KitMachItem.m_IsModifiedDistanceSpiral OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse
+                     KitMachItem.m_IsModifiedLiLoad Then
                      Return True
                   End If
                Next
@@ -476,10 +480,19 @@ Public Class PolishingsPageUC
             KitMachItem.m_IsModifiedOffCnt = False
             KitMachItem.m_IsModifiedZigZagX = False
             KitMachItem.m_IsModifiedOffZigZagX = False
+            KitMachItem.m_IsModifiedRadiusX = False
+            KitMachItem.m_IsModifiedDistanceX = False
             KitMachItem.m_IsModifiedZigZagY = False
             KitMachItem.m_IsModifiedOffZigZagY = False
+            KitMachItem.m_IsModifiedRadiusY = False
+            KitMachItem.m_IsModifiedDistanceY = False
+            KitMachItem.m_IsModifiedSpiral = False
+            KitMachItem.m_IsModifiedOffSpiral = False
+            KitMachItem.m_IsModifiedRadiusSpiral = False
+            KitMachItem.m_IsModifiedDistanceSpiral = False
             KitMachItem.m_IsModifiedStepX = False
             KitMachItem.m_IsModifiedStepY = False
+            KitMachItem.m_IsModifiedStepSpiral = False
             KitMachItem.m_IsModifiedLiLen = False
             KitMachItem.m_IsModifiedLiHeight = False
             KitMachItem.m_IsModifiedLiLoad = False
@@ -493,20 +506,29 @@ Public Class PolishingsPageUC
       OffContourTxBx.Text = LenToString(kmShow.dOffsetCnt, 3)
       ZigZagXTxBx.Text = kmShow.nZigZagX.ToString()
       OffZigZagXTxBx.Text = LenToString(kmShow.dOffZigZagX, 3)
-      StepXTxBx.Text = LenToString( kmShow.dStepX, 3)
+      StepXTxBx.Text = LenToString(kmShow.dStepX, 3)
+      RadiusXTxBx.Text = LenToString(kmShow.dRadiusX, 3)
+      DistanceXTxBx.Text = LenToString(kmShow.dDistanceX, 3)
       ZigZagYTxBx.Text = kmShow.nZigZagY.ToString()
       OffZigZagYTxBx.Text = LenToString(kmShow.dOffZigZagY, 3)
-      StepYTxBx.Text = LenToString( kmShow.dStepY, 3)
-      LiLenTxBx.Text = LenToString( kmShow.dLiLen, 3)
-      LiHeightTxBx.Text = LenToString( kmShow.dLiHeight, 3)
-      LiLoadTxBx.Text = LenToString( kmShow.dLiLoad, 3)
+      StepYTxBx.Text = LenToString(kmShow.dStepY, 3)
+      RadiusYTxBx.Text = LenToString(kmShow.dRadiusY, 3)
+      DistanceYTxBx.Text = LenToString(kmShow.dDistanceY, 3)
+      SpiralTxBx.Text = kmShow.nSpiral.ToString()
+      StepSpiralTxBx.Text = LenToString(kmShow.dStepSpiral, 3)
+      OffSpiralTxBx.Text = LenToString(kmShow.dOffSpiral, 3)
+      RadiusSpiralTxBx.Text = LenToString(kmShow.dRadiusSpiral, 3)
+      DistanceSpiralTxBx.Text = LenToString(kmShow.dDistanceSpiral, 3)
+      LiLenTxBx.Text = LenToString(kmShow.dLiLen, 3)
+      LiHeightTxBx.Text = LenToString(kmShow.dLiHeight, 3)
+      LiLoadTxBx.Text = LenToString(kmShow.dLiLoad, 3)
    End Sub
 
    Private Sub KitMachsLstBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles KitMachsLstBx.SelectionChanged
       Dim SelectedKitMach As KitMach = KitMachsLstBx.SelectedItem
       If Not IsNothing(SelectedKitMach) Then
          ' visualizzo i parametri relativi al KitMach selezionato
-         ShowKitMach( SelectedKitMach)
+         ShowKitMach(SelectedKitMach)
       End If
    End Sub
 
@@ -520,14 +542,16 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffContourTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffContourTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffContourTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffsetCnt = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = nTemp
+         StringToLen(OffContourTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffsetCnt = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = dTemp
       End If
    End Sub
 
+#Region "ZigZag X"
+
    Private Sub ZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagXTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -538,11 +562,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagXTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagXTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagX = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = nTemp
+         StringToLen(OffZigZagXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = dTemp
       End If
    End Sub
 
@@ -555,6 +579,28 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusX = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceX = dTemp
+      End If
+   End Sub
+
+#End Region  ' ZigZag X
+
+#Region "ZizZag Y"
+
    Private Sub ZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagYTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -565,11 +611,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagYTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagYTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagY = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = nTemp
+         StringToLen(OffZigZagYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = dTemp
       End If
    End Sub
 
@@ -582,6 +628,75 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusY = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceY = dTemp
+      End If
+   End Sub
+
+#End Region    ' ZigZagY
+
+#Region "Spirale"
+
+   Private Sub SpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles SpiralTxBx.EgtClosed
+      Dim nTemp As Integer = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         nTemp = SpiralTxBx.Text
+         KitMachsLstBx.SelectedItem.nSpiral = nTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).nSpiral = nTemp
+      End If
+   End Sub
+
+   Private Sub OffSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(OffSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub StepSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(StepSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dStepSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dStepSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub RadiusSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceSpiral = dTemp
+      End If
+   End Sub
+
+#End Region  ' Spirale
+
    Private Sub LiLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles LiLenTxBx.EgtClosed
       Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -616,11 +731,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub ToolCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs)
-      If Not IsNothing( KitMachsLstBx.SelectedItem) Then
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
          m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).SelTool = KitMachsLstBx.SelectedItem.SelTool
-         If KitMachsLstBx.SelectedItem.SelTool >= 0 then
-            KitMachsLstBx.SelectedItem.sToolName = m_ToolList( KitMachsLstBx.SelectedItem.SelTool)
-            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList( KitMachsLstBx.SelectedItem.SelTool)
+         If KitMachsLstBx.SelectedItem.SelTool >= 0 Then
+            KitMachsLstBx.SelectedItem.sToolName = m_ToolList(KitMachsLstBx.SelectedItem.SelTool)
+            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList(KitMachsLstBx.SelectedItem.SelTool)
          Else
             KitMachsLstBx.SelectedItem.sToolName = "---"
             KitMachsLstBx.SelectedItem.sToolUUID = "---"
@@ -630,143 +745,176 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
-   Private Function ReadKitName( nKitIndex As Integer) As String
+   Private Function ReadKitName(nKitIndex As Integer) As String
       ' Leggo il nome del kit
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
       Dim sName As String = ""
-      GetPrivateProfileString( S_HEADER, sKey, "", sName, m_sKitFile)
+      GetPrivateProfileString(S_HEADER, sKey, "", sName, m_sKitFile)
       Return sName
    End Function
-   
-   Private Function ReadKit( nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
+
+   Private Function ReadKit(nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
       ' Leggo il nome del kit
-      Dim sName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sName) Then Return False
+      Dim sName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sName) Then Return False
       ' Creo il kit
-      Kit = New Kit( If( removeFlag, nKitIndex - 1, nKitIndex), sName)
+      Kit = New Kit(If(removeFlag, nKitIndex - 1, nKitIndex), sName)
       ' Leggo le sue lavorazioni
       For nkitMachIndex As Integer = 1 To 100
          Dim kmItem As KitMach = Nothing
-         if ReadKitMach( sName, nkitMachIndex, kmItem) Then
-            Kit.AddKitMach( kmItem)
+         If ReadKitMach(sName, nkitMachIndex, kmItem) Then
+            Kit.AddKitMach(kmItem)
          Else
             Exit For
          End If
       Next
       ' Se non sono state trovate lavorazioni, ne aggiungo una standard
       If Kit.KitMachList.Count() = 0 Then
-         Kit.AddKitMach( New KitMach( 1))
+         Kit.AddKitMach(New KitMach(1))
       End If
       Return True
    End Function
 
-   Private Function ReadKitMach( sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
+   Private Function ReadKitMach(sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
       ' Verifico esistenza lavorazione del kit
       Dim sSect As String = S_KIT & "." & sKitName
-      Dim sKeyInd As String = nkitMachIndex.ToString("D2") & "."
+      Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       Dim sName As String = ""
-      If GetPrivateProfileString( sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
+      If GetPrivateProfileString(sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
       ' Lettura completa
       kmItem = New KitMach
       kmItem.sToolName = sName
-      kmItem.nId = nkitMachIndex
-      GetPrivateProfileString( sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
-      kmItem.bActive = ( GetPrivateProfileInt( sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
+      kmItem.nId = nKitMachIndex
+      GetPrivateProfileString(sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
+      kmItem.bActive = (GetPrivateProfileInt(sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
       kmItem.nContour = GetPrivateProfileInt(sSect, sKeyInd & K_CONTOUR, 0, m_sKitFile)
-      kmItem.dOffsetCnt = GetPrivateProfileInt(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
+      kmItem.dOffsetCnt = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
       kmItem.nZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGX, 0, m_sKitFile)
-      kmItem.dOffZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
+      kmItem.dOffZigZagX = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
       kmItem.dStepX = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPX, 0, m_sKitFile)
+      kmItem.dRadiusX = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSX, 0, m_sKitFile)
+      kmItem.dDistanceX = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEX, 0, m_sKitFile)
       kmItem.nZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGY, 0, m_sKitFile)
-      kmItem.dOffZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
-      kmItem.dStepY = GetPrivateProfileDouble( sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
-      kmItem.dLiLen = GetPrivateProfileDouble( sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
-      kmItem.dLiHeight = GetPrivateProfileDouble( sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
-      kmItem.dLiLoad = GetPrivateProfileDouble( sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
+      kmItem.dOffZigZagY = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
+      kmItem.dStepY = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
+      kmItem.dRadiusY = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSY, 0, m_sKitFile)
+      kmItem.dDistanceY = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEY, 0, m_sKitFile)
+
+      kmItem.nSpiral = GetPrivateProfileInt(sSect, sKeyInd & K_SPIRAL, 0, m_sKitFile)
+      kmItem.dOffSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSPIRAL, 0, m_sKitFile)
+      kmItem.dStepSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPSPIRAL, 0, m_sKitFile)
+      kmItem.dRadiusSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSSPIRAL, 0, m_sKitFile)
+      kmItem.dDistanceSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCESPIRAL, 0, m_sKitFile)
+
+      kmItem.dLiLen = GetPrivateProfileDouble(sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
+      kmItem.dLiHeight = GetPrivateProfileDouble(sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
+      kmItem.dLiLoad = GetPrivateProfileDouble(sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
       Return True
    End Function
 
-   Friend Function WriteKitName( nKitIndex As Integer, sKitName As String) As Boolean
+   Friend Function WriteKitName(nKitIndex As Integer, sKitName As String) As Boolean
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
-      Return WritePrivateProfileString( S_HEADER, sKey, sKitName, m_sKitFile)
+      Return WritePrivateProfileString(S_HEADER, sKey, sKitName, m_sKitFile)
    End Function
 
-   Private Function WriteKitMach( nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
+   Private Function WriteKitMach(nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Indice
       Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       ' Scrivo i dati della lavorazione
-      If Not IsNothing( kmItem) Then
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, If( kmItem.bActive, "1", "0"), m_sKitFile)
+      If Not IsNothing(kmItem) Then
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, If(kmItem.bActive, "1", "0"), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, kmItem.nContour.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, kmItem.dOffsetCnt.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, DoubleToString(kmItem.dOffsetCnt, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, kmItem.nZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, kmItem.dOffZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, DoubleToString( kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, DoubleToString(kmItem.dOffZigZagX.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, DoubleToString(kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, DoubleToString(kmItem.dRadiusX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, DoubleToString(kmItem.dDistanceX, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, kmItem.nZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, kmItem.dOffZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, DoubleToString( kmItem.dStepY, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, DoubleToString( kmItem.dLiLen, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, DoubleToString( kmItem.dLiHeight, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, DoubleToString( kmItem.dLiLoad, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, DoubleToString(kmItem.dOffZigZagY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, DoubleToString(kmItem.dStepY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, DoubleToString(kmItem.dRadiusY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, DoubleToString(kmItem.dDistanceY, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, kmItem.nSpiral.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, DoubleToString(kmItem.dOffSpiral.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, DoubleToString(kmItem.dStepSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, DoubleToString(kmItem.dRadiusSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, DoubleToString(kmItem.dDistanceSpiral, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, DoubleToString(kmItem.dLiLen, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, DoubleToString(kmItem.dLiHeight, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, DoubleToString(kmItem.dLiLoad, 3), m_sKitFile)
       Else
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
       End If
       Return True
    End Function
 
-   Private Function EraseKit( nKitIndex As Integer) As Boolean
+   Private Function EraseKit(nKitIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dalla lista dei kit scalando tutti di una posizione e eliminando l'ultimo
       Dim nNextKitIndex As Integer = nKitIndex + 1
-      Dim sNextKitName As String = ReadKitName( nNextKitIndex) 
-      while Not String.IsNullOrWhiteSpace( sNextKitName)
-         WriteKitName( nNextKitIndex - 1, sNextKitName)
+      Dim sNextKitName As String = ReadKitName(nNextKitIndex)
+      While Not String.IsNullOrWhiteSpace(sNextKitName)
+         WriteKitName(nNextKitIndex - 1, sNextKitName)
          nNextKitIndex += 1
-         sNextKitName = ReadKitName( nNextKitIndex) 
+         sNextKitName = ReadKitName(nNextKitIndex)
       End While
-      WriteKitName( nNextKitIndex - 1, Nothing)
+      WriteKitName(nNextKitIndex - 1, Nothing)
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Cancello tutte le lavorazioni del kit
-      WritePrivateProfileString( sSect, Nothing, Nothing, m_sKitFile)
+      WritePrivateProfileString(sSect, Nothing, Nothing, m_sKitFile)
       Return True
    End Function
 
-   Private Function EraseKitMach( nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
+   Private Function EraseKitMach(nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dali KitMach scalando tutti di una posizione e eliminando l'ultimo
       Dim kmCurr As KitMach = Nothing
       Dim nNextKitMachIndex As Integer = nKitMachIndex + 1
-      While ReadKitMach( sKitName, nNextKitMachIndex, kmCurr)
+      While ReadKitMach(sKitName, nNextKitMachIndex, kmCurr)
          kmCurr.nId = nNextKitMachIndex - 1
-         WriteKitMach( nKitIndex, nNextKitMachIndex - 1, kmCurr)
+         WriteKitMach(nKitIndex, nNextKitMachIndex - 1, kmCurr)
          nNextKitMachIndex += 1
       End While
-      WriteKitMach( nKitIndex, nNextKitMachIndex - 1, Nothing)
+      WriteKitMach(nKitIndex, nNextKitMachIndex - 1, Nothing)
       Return True
    End Function
 
@@ -804,7 +952,7 @@ Class Kit
       Get
          Return m_nId
       End Get
-      Set( value As Integer) 
+      Set(value As Integer)
          m_nId = value
       End Set
    End Property
@@ -824,7 +972,7 @@ Class Kit
       End Set
    End Property
 
-   Sub New( nId As Integer, sName As String)
+   Sub New(nId As Integer, sName As String)
       m_nId = nId
       m_sName = sName
 
@@ -832,21 +980,21 @@ Class Kit
 
    End Sub
 
-   Sub New( nId As Integer, sName As String, kitSou As Kit)
+   Sub New(nId As Integer, sName As String, kitSou As Kit)
       m_nId = nId
       m_sName = sName
 
       m_KitMachList = New List(Of KitMach)
 
-      If IsNothing( kitSou) Then Return
+      If IsNothing(kitSou) Then Return
 
       For Each kmItem As KitMach In kitSou.m_KitMachList
-         AddKitMach( kmItem)
+         AddKitMach(kmItem)
       Next
 
    End Sub
 
-   Sub AddKitMach( kitMachItem As KitMach)
+   Sub AddKitMach(kitMachItem As KitMach)
       m_KitMachList.Add(kitMachItem)
    End Sub
 
@@ -862,15 +1010,29 @@ Class KitMach
    Private m_sToolName As String
    Private m_SelTool As Integer
    Friend Shared m_ToolList As List(Of String)
+
    Private m_bActive As Boolean
    Private m_nContour As Integer
    Private m_dOffsetCnt As Double
+
    Private m_nZigZagX As Integer
    Private m_dStepX As Double
    Private m_dOffZigZagX As Double
+   Private m_dRadiusX As Double
+   Private m_dDistanceX As Double
+
    Private m_nZigZagY As Integer
    Private m_dStepY As Double
    Private m_dOffZigZagY As Double
+   Private m_dRadiusY As Double
+   Private m_dDistanceY As Double
+
+   Private m_nSpiral As Integer
+   Private m_dOffSpiral As Double
+   Private m_dStepSpiral As Double
+   Private m_dRadiusSpiral As Double
+   Private m_dDistanceSpiral As Double
+
    Private m_dLiLen As Double
    Private m_dLiHeight As Double
    Private m_dLiLoad As Double
@@ -958,6 +1120,8 @@ Class KitMach
       End Set
    End Property
 
+#Region "Contorno"
+
    Public m_IsModifiedActive As Boolean = False
    Public Property bActive As Boolean
       Get
@@ -985,11 +1149,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffCnt As Boolean = False
-   Public Property dOffsetCnt As Integer
+   Public Property dOffsetCnt As Double
       Get
          Return m_dOffsetCnt
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffsetCnt Then
             m_dOffsetCnt = value
             m_IsModifiedOffCnt = True
@@ -997,6 +1161,10 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Contorno
+
+#Region "ZigZag X"
+
    Public m_IsModifiedZigZagX As Boolean = False
    Public Property nZigZagX As Integer
       Get
@@ -1011,11 +1179,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagX As Boolean = False
-   Public Property dOffZigZagX As Integer
+   Public Property dOffZigZagX As Double
       Get
          Return m_dOffZigZagX
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagX Then
             m_dOffZigZagX = value
             m_IsModifiedOffZigZagX = True
@@ -1036,6 +1204,36 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusX As Boolean = False
+   Public Property dRadiusX As Double
+      Get
+         Return m_dRadiusX
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusX Then
+            m_dRadiusX = value
+            m_IsModifiedRadiusX = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceX As Boolean = False
+   Public Property dDistanceX As Double
+      Get
+         Return m_dDistanceX
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceX Then
+            m_dDistanceX = value
+            m_IsModifiedDistanceX = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag X
+
+#Region "ZigZag Y"
+
    Public m_IsModifiedZigZagY As Boolean = False
    Public Property nZigZagY As Integer
       Get
@@ -1050,11 +1248,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagY As Boolean = False
-   Public Property dOffZigZagY As Integer
+   Public Property dOffZigZagY As Double
       Get
          Return m_dOffZigZagY
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagY Then
             m_dOffZigZagY = value
             m_IsModifiedOffZigZagY = True
@@ -1075,6 +1273,105 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusY As Boolean = False
+   Public Property dRadiusY As Double
+      Get
+         Return m_dRadiusY
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusY Then
+            m_dRadiusY = value
+            m_IsModifiedRadiusY = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceY As Boolean = False
+   Public Property dDistanceY As Double
+      Get
+         Return m_dDistanceY
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceY Then
+            m_dDistanceY = value
+            m_IsModifiedDistanceY = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag Y
+
+#Region "Spirale"
+
+   Public m_IsModifiedSpiral As Boolean = False
+   Public Property nSpiral As Integer
+      Get
+         Return m_nSpiral
+      End Get
+      Set(value As Integer)
+         If value <> m_nSpiral Then
+            m_nSpiral = value
+            m_IsModifiedSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedOffSpiral As Boolean = False
+   Public Property dOffSpiral As Double
+      Get
+         Return m_dOffSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dOffSpiral Then
+            m_dOffSpiral = value
+            m_IsModifiedOffSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedStepSpiral As Boolean = False
+   Public Property dStepSpiral As Double
+      Get
+         Return m_dStepSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dStepSpiral Then
+            m_dStepSpiral = value
+            m_IsModifiedStepSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedRadiusSpiral As Boolean = False
+   Public Property dRadiusSpiral As Double
+      Get
+         Return m_dRadiusSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusSpiral Then
+            m_dRadiusSpiral = value
+            m_IsModifiedRadiusSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceSpiral As Boolean = False
+   Public Property dDistanceSpiral As Double
+      Get
+         Return m_dDistanceSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceSpiral Then
+            m_dDistanceSpiral = value
+            m_IsModifiedDistanceSpiral = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' Spirale
+
+#Region "Parametri lavorazione"
+
    Public m_IsModifiedLiLen As Boolean = False
    Public Property dLiLen As Double
       Get
@@ -1114,6 +1411,8 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Parametri lavorazione
+
    Sub New()
       m_nId = 0
       m_SelTool = 0
@@ -1125,15 +1424,24 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( nId As Integer)
+   Sub New(nId As Integer)
       m_nId = nId
       m_SelTool = 0
       m_sToolUUID = "---"
@@ -1144,17 +1452,26 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( kmSou As KitMach) 
+   Sub New(kmSou As KitMach)
       m_nId = kmSou.nId
-      m_SelTool = kmSou.selTool
+      m_SelTool = kmSou.SelTool
       m_sToolUUID = kmSou.sToolUUID
       m_sToolName = kmSou.sToolName
       m_bActive = kmSou.bActive
@@ -1163,9 +1480,18 @@ Class KitMach
       m_nZigZagX = kmSou.nZigZagX
       m_dOffZigZagX = kmSou.dOffZigZagX
       m_dStepX = kmSou.dStepX
+      m_dRadiusX = kmSou.dRadiusX
+      m_dDistanceX = kmSou.dDistanceX
       m_nZigZagY = kmSou.nZigZagY
       m_dOffZigZagY = kmSou.dOffZigZagY
       m_dStepY = kmSou.dStepY
+      m_dRadiusY = kmSou.dRadiusY
+      m_dDistanceY = kmSou.dDistanceY
+      m_nSpiral = kmSou.nSpiral
+      m_dOffSpiral = kmSou.dOffSpiral
+      m_dStepSpiral = kmSou.dStepSpiral
+      m_dRadiusSpiral = kmSou.dRadiusSpiral
+      m_dDistanceSpiral = kmSou.dDistanceSpiral
       m_dLiLen = kmSou.dLiLen
       m_dLiHeight = kmSou.dLiHeight
       m_dLiLoad = kmSou.m_dLiLoad

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

Machine/ToolsDbPageUC.xaml.vb

@@ -506,7 +506,7 @@ Public Class ToolsDbPageUC
          ToolToExportList.Add(ImpExpToolFamily)
       Next
 
-      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList)
+      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList, True)
       Dim ExportWnd As New ImportExportToolWD(Application.Current.MainWindow, ExportWndVM)
 
       ExportWnd.ShowDialog()
@@ -558,7 +558,7 @@ Public Class ToolsDbPageUC
             ToolToImportList.Add(NewFamily)
          End If
       Next
-      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, ImportFilePath, ImportFileToolNameList)
+      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, False, ImportFilePath, ImportFileToolNameList)
       Dim ImportWnd As New ImportExportToolWD(Application.Current.MainWindow, ImportWndVM)
 
       ImportWnd.ShowDialog()

Machine/WaterJetPageUC.xaml.vb

@@ -8,18 +8,18 @@ Public Class WaterJetPageUC
 
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-   Private m_refWaterjetDbWindowVM As EgtWPFLib5.WaterjetDbWindowVM
+   Private m_refWaterjetDbWindowVM As WaterjetDbWindowVM_OmagCUT
    Private m_sOrigNewMaterial As String = String.Empty
    Private m_sOrigNewSubMaterial As String = String.Empty
 
    Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
       Me.DataContext = m_refWaterjetDbWindowVM
       EgtWPFLib.Utility.MainWindow = m_MainWindow
    End Sub
 
    Public Sub WaterJetPage_Reinitialize()
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
       Me.DataContext = m_refWaterjetDbWindowVM
    End Sub
 

Machine/WaterjetDbWindowVM.vb

@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib
+
+' nuova libreria EgtWPFLib5 ver 2.4g1
+Public Class WaterjetDbWindowVM_OmagCUT
+   Inherits EgtWPFLib5.WaterjetDbWindowVM
+
+   Public Function CloseWaterjetDb_OmagCut(MainWindow As Window) As SaveWndBtnEnum
+      If bIsModified Then
+         Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveWjDbWnd.m_nPressedBtn
+            Case 1   ' Yes
+               WriteWaterjetDb()
+               bIsModified = False
+               Return SaveWndBtnEnum.YES
+            Case 2   ' No
+               Return SaveWndBtnEnum.NO
+            Case Else   ' Cancel
+               Return SaveWndBtnEnum.CANCEL
+         End Select
+      Else
+         Dim bExitFor As Boolean = False
+         For Each Material As EgtWPFLib5.WjMaterial In MaterialList
+            If Not IsNothing(Material.SubMaterialList) Then
+               For Each SubMaterial As EgtWPFLib5.WjSubMaterial In Material.SubMaterialList
+                  If Not IsNothing(SubMaterial.ParamList) Then
+                     For Each QParam As EgtWPFLib5.WjParam In SubMaterial.ParamList
+                        bExitFor = QParam.IsModified()
+                        If bExitFor Then Exit For
+                     Next
+                  End If
+                  If bExitFor Then Exit For
+               Next
+            End If
+            If bExitFor Then Exit For
+         Next
+         If bExitFor Then
+            Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+            Select Case SaveWjDbWnd.m_nPressedBtn
+               Case 1   ' Yes
+                  WriteWaterjetDb()
+                  bIsModified = False
+                  Return SaveWndBtnEnum.YES
+               Case 2   ' No
+                  Return SaveWndBtnEnum.NO
+               Case Else   ' Cancel
+                  Return SaveWndBtnEnum.CANCEL
+            End Select
+         End If
+      End If
+      Return SaveWndBtnEnum.YES
+   End Function
+
+   Sub New(sMachDir As String)
+      MyBase.New(sMachDir)
+   End Sub
+
+End Class

MainWindow.xaml.vb

@@ -2,6 +2,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtPHOTOLib
 Imports System.ComponentModel
 Imports System.Threading
 Imports System.Windows.Threading
@@ -320,11 +321,13 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2401, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2401, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2411, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2411, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -498,6 +501,64 @@ Class MainWindow
       AddHandler m_ProdLineTimer.Tick, AddressOf OnProdLine
       ' Imposto riferimento a funzione delle textbox che disattiva scene in libreria
       EgtWPFLib.EgtTextBox.m_refScenesIsEnabled = AddressOf IsEnabledScenes
+
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\" & DB_FILENAME) Then
+
+            If Not ManageDb.ConnectToDb(PhotDir.Trim & "\" & DB_FILENAME) Then
+               EgtOutLog("Error connecting to DB: " & PhotDir.Trim & "\" & DB_FILENAME)
+               ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+               m_CurrentProjectPageUC.ClearMessage()
+               m_CurrentProjectPageUC.SetErrorMessage("Denied connection SlabDB")
+            Else
+               ' Impostazione direttorio per backup
+               Dim BackUpDir As String = m_sDataRoot & "\BackUp"
+               Directory.CreateDirectory(BackUpDir)
+               EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
+               EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
+               EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
+               EgtPHOTOLib.MainData.SetPhotoDir(PhotDir)
+               EgtPHOTOLib.MainData.SetBackUpDir(BackUpDir)
+               EgtPHOTOLib.MainData.SetIsOMagCUT(True)
+               Dim sLastBlock As String = String.Empty
+               GetPrivateProfileString(S_SCRAPS, K_LASTBLOCK, "", sLastBlock, GetIniFile())
+               If Not String.IsNullOrEmpty(sLastBlock) Then
+                  EgtPHOTOLib.MainData.SetLastBlock(sLastBlock)
+               End If
+
+               If GetPrivateProfileInt(S_SCRAPS, K_ENABLE_PRINTER, 0, GetIniFile()) = 1 Then
+                  ' leggo nome file prn (per stampante zebra)
+                  Dim m_TemplateFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_TEMPLATE, m_sDataRoot & "\Label\Default.prn", m_TemplateFilePrinter, GetIniFile())
+                  ' leggo nome del direttorio in cui scrivere il file ini (per stampante zebra) -- solo se si desidera scrivere il file in un direttorio diverso
+                  Dim m_DatFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_DAT, m_sDataRoot & "\Temp", m_DatFilePrinter, GetIniFile())
+                  ' leggo nome file exe (per stampante zebra)
+                  Dim m_ZebraUtilitiesExe As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_ZEBRAUTILITIES, System.AppDomain.CurrentDomain.BaseDirectory & "ZebraPrinterUtilitiesR32.exe", m_ZebraUtilitiesExe, GetIniFile())
+                  EgtPHOTOLib.MainData.SetTemplateFilePrinter(m_TemplateFilePrinter)
+                  EgtPHOTOLib.MainData.SetDataFilePrinter(m_DatFilePrinter)
+                  EgtPHOTOLib.MainData.SetZebraPrinterExe(m_ZebraUtilitiesExe)
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(True)
+               Else
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(False)
+               End If
+
+               ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
+               EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
+                  Dim sIdKey As String = String.Empty
+                  EgtGetKeyInfo(sIdKey)
+                  EgtPHOTOLib.MainData.SetKey(sIdKey)
+               End If
+            End If
+      End If
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -546,6 +607,16 @@ Class MainWindow
       m_WorkInProgressPageUC.Prepare()
       m_WorkInProgressPageUC.UpdateTools()
 
+      Dim sVal As String = String.Empty
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevLength)
+         m_CurrentMachine.SetFsevLength(m_CurrentMachine.dFsevLength)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevPerc)
+         m_CurrentMachine.SetFsevPerc(m_CurrentMachine.dFsevPerc)
+      End If
+
       ' Se macchina fotografica abilitata, ne inizializzo il gestore
 #If Not TRIAL Then
       If GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) Then
@@ -569,6 +640,12 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       ' disbilito Test
       TestOff()
+      ' disabilito DragRettangle
+      DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -625,6 +702,9 @@ Class MainWindow
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -678,6 +758,9 @@ Class MainWindow
    Private Sub CadCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles CadCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -730,6 +813,9 @@ Class MainWindow
    Private Sub FrameCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrameCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -753,8 +839,8 @@ Class MainWindow
             m_ActivePage = Pages.FrameCut
          Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.CSV
             ' Pages.Simulation: quando sono nella simulazione devo uscire dalla pagina
-            CadCutBtn.IsChecked = True
-            FrameCutBtn.IsChecked = False
+            CadCutBtn.IsChecked = False
+            FrameCutBtn.IsChecked = True
          Case Pages.FrameCut
             FrameCutBtn.IsChecked = True
          Case Pages.Machine
@@ -783,6 +869,9 @@ Class MainWindow
    Private Sub MachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachineBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -831,6 +920,9 @@ Class MainWindow
    Private Sub OptionsBtn_Click(sender As Object, e As RoutedEventArgs) Handles OptionsBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1071,10 +1163,10 @@ Class MainWindow
          Case MachinePageUC.MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
             Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                Return False
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
       End Select
@@ -1137,10 +1229,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      ' DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1799,7 +1896,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next
@@ -1890,4 +1989,25 @@ Class MainWindow
       Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
    End Sub
 
+   ' spegne il comando per la mofica dei rettangoli
+   Public Sub DragRettangleOff()
+      m_CadCutPageUC.m_NestPage.DragRettanleBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedDragRettangle = False
+      ShowParkedParts()
+
+   End Sub
+
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
+   End Sub
+
 End Class

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.1.3")>
-<Assembly: AssemblyFileVersion("2.4.1.3")>
+<Assembly: AssemblyVersion("2.4.11.2")>
+<Assembly: AssemblyFileVersion("2.4.11.2")>

NcComm/CNCommunication.vb

@@ -284,6 +284,10 @@ Public Class CNCommunication
 
          GetPrivateProfileString(S_NCDATA, K_PARKING, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.Parking, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEZONE, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnableZone, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEPC, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnablePC, sVal)
 
          GetPrivateProfileString(S_NCDATA, K_VACUUMUP, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumUp, sVal)
@@ -544,6 +548,8 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -575,6 +581,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -588,8 +595,12 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
             End If
-            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
 
             ' Nuovi bottoni (uso joystick) per Area4
             If m_IsNewConsole Then
@@ -597,6 +608,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
 
          End If
@@ -626,6 +638,10 @@ Public Class CNCommunication
          End If
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
       End If
 
    End Sub

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 52                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -68,6 +68,8 @@ Public MustInherit Class CN_generico
       Remote = 51
 
       Parking = 52
+      EnableZone = 53
+      EnablePC = 54
    End Enum
 
 #End Region
@@ -176,6 +178,8 @@ Public MustInherit Class CN_generico
    Public bLimitZState As Boolean
    Public bPowerOvr As Double
    Public bParkingState As Boolean
+   Public nEnableZone As Integer
+   Public nEnablePc As Integer
    Public bHsm As Double
    Public bVacuumUp As Boolean
    Public bVacuumDown As Boolean

NcComm/M_Num.vb

@@ -92,7 +92,7 @@ Namespace Num
       Private Const TIMEOUT As Short = 99
       Private Const SHORTSLEEPTIME As Short = 10
       Private Const LONGSLEEPTIME As Short = 40
-      Private Const SHORTSLEEPCOUNT As Short = 20
+      Private Const SHORTSLEEPCOUNT As Short = 100
       Private Const LONGSLEEPCOUNT As Short = 200
 
 #End Region
@@ -1090,6 +1090,10 @@ Namespace Num
 
                Case CnData.Parking     ' (52)
                   bParkingState = CBool(values(n))
+               Case CnData.EnableZone     ' (53)
+                  nEnableZone = CInt(values(n))
+               Case CnData.EnablePC     ' (54)
+                  nEnablePc = CInt(values(n))
 
             End Select
          Next

OmagCUT.vbproj

@@ -115,6 +115,9 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="EgtPHOTOLib">
+      <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
+    </Reference>
     <Reference Include="EgtUILib, Version=2.3.4.5, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
@@ -143,6 +146,10 @@
     </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
+    <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\System.Data.SQLite.dll</HintPath>
+    </Reference>
     <Reference Include="System.Drawing" />
     <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml.Linq" />
@@ -166,6 +173,9 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
+      <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
@@ -202,10 +212,20 @@
     <Compile Include="Machine\ImportExportToolWD.xaml.vb">
       <DependentUpon>ImportExportToolWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Machine\WaterjetDbWindowVM.vb" />
     <Compile Include="Machine\WaterJetPageVM.vb" />
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Project\AddToDataBaseUC.xaml.vb">
+      <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\OmagPhotoWD.xaml.vb">
+      <DependentUpon>OmagPhotoWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\ScrapsWD.xaml.vb">
+      <DependentUpon>ScrapsWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Project\StartLauncheWD.xaml.vb">
       <DependentUpon>StartLauncheWD.xaml</DependentUpon>
     </Compile>
@@ -405,6 +425,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -452,6 +476,18 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="Project\AddToDataBaseUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\OmagPhotoWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\ScrapsWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Project\StartLauncheWD.xaml">
     </Page>
     <Page Include="Project\CicloStartWD.xaml">
@@ -1238,6 +1274,31 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Acquisisci-P.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\Spiral.png" />
+    <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli_delete.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parking.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -46,6 +46,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>
@@ -105,6 +106,9 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -116,6 +116,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>
@@ -173,6 +174,9 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
@@ -204,6 +208,7 @@
     <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
     <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
     <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+    <BitmapImage x:Key="ParkingImg" UriSource="Resources/NewIcons/Parking.png"></BitmapImage>
 
 
     <!--Frame-->
@@ -214,6 +219,8 @@
     <!--Machinig-->
     <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliWJImg" UriSource="Resources/NewIcons/Ponticelli.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliDeleteWJImg" UriSource="Resources/NewIcons/Ponticelli_delete.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>

Project/AddToDataBaseUC.xaml

@@ -0,0 +1,95 @@
+<UserControl x:Class="AddToDataBaseUC"
+            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+            xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+            xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+            xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+            mc:Ignorable="d" 
+            d:DesignHeight="853.3" d:DesignWidth="1280">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="2.5*"/>
+                <ColumnDefinition Width="0.25*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+            <!--Nome BLOCCO-->
+            <TextBlock Name="BlockTxBl" Grid.Column="1" Grid.Row="1" Text="Name block"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="BlockTxBx" Grid.Column="3" Grid.Row="1"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--Numero ID-->
+            <TextBlock Name="NbrIdTxBl" Grid.Column="1" Grid.Row="3" Text="ID"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="NbrIdTxBx" Grid.Column="3" Grid.Row="3"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--STATE-->
+            <TextBlock Name="StateTxBl" Grid.Column="1" Grid.Row="5" Text="State"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <ComboBox Name="StateCmBx" Grid.Column="3" Grid.Row="5" Style="{StaticResource OmagCut_LeftComboBoxInBorder}">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+            <!--PROJECT-->
+            <TextBlock Name="ProjectNameTxBl" Grid.Column="1" Grid.Row="7" Text="Project"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ProjectTxBx" Grid.Column="3" Grid.Row="7" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--MATERIAL-->
+            <TextBlock Name="MatTxBl" Grid.Column="1" Grid.Row="9" Text="Mat"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="MatTxBx" Grid.Column="3" Grid.Row="9" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}" IsEnabled="False"/>
+            <!--THICKNESS-->
+            <TextBlock Name="ThicknessTxBl" Grid.Column="1" Grid.Row="11" Text="Thickness"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ThicknessTxBx" Grid.Column="3" Grid.Row="11"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <!--WAREHOUSE-->
+            <TextBlock Name="WarehouseTxBl" Grid.Column="1" Grid.Row="13" Text="Warehouse position"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="WarehouseTxBx" Grid.Column="3" Grid.Row="13"
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+
+            <!--CANCEL-->
+            <Button Name="CacelBtn" Grid.Column="1" Grid.Row="15" Content="Delete"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--ADD-->            
+            <Button Name="AddBtn" Grid.Column="3" Grid.Row="15" Content="Add"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--PRINT-->
+            <Button Name="PrintBtn" Grid.Column="1" Grid.Row="17" Content="Print"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            
+        </Grid>
+
+    </Border>
+
+</UserControl>

Project/AddToDataBaseUC.xaml.vb

@@ -0,0 +1,121 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class AddToDataBaseUC
+
+   Private m_OmagPhotoWD As OmagPhotoWD
+
+#Region "PROPERTY"
+   Private Sub BlockTxBx_EgtClosed(sender As Object, e As EventArgs) Handles BlockTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock = BlockTxBx.Text
+      ' devo riasseganre il valore dell'indice
+      NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      EnableButtons()
+   End Sub
+
+   Private Sub NbrIdTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NbrIdTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID = NbrIdTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub StateCmBx_Changed() Handles StateCmBx.SelectionChanged
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State = StateCmBx.SelectedIndex
+      EnableButtons()
+   End Sub
+
+   Private Sub ProjectTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ProjectTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo = ProjectTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub ThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ThicknessTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = ThicknessTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub WarehouseTxBx_EgtClosed(sender As Object, e As EventArgs) Handles WarehouseTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.WarehousePosition = WarehouseTxBl.Text
+      EnableButtons()
+   End Sub
+#End Region    ' Property
+
+   Sub New(LocalOmagPhotoWD As OmagPhotoWD)
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_OmagPhotoWD = LocalOmagPhotoWD
+   End Sub
+
+   ' dopo la crezione della pagina imposto lo stato dei pulsanti
+   Private Sub PostLoaded() Handles Me.Loaded
+      If EgtPHOTOLib.MainData.bEnableTextId Then
+         BlockTxBx.Visibility = Visibility.Collapsed
+         BlockTxBl.Visibility = Visibility.Collapsed
+      Else
+         NbrIdTxBx.IsEnabled = False
+      End If
+      PrintBtn.IsEnabled = EgtPHOTOLib.MainData.bEnablePrinter
+      EnableButtons()
+   End Sub
+
+#Region "COMMAND"
+   Private Sub CancelBtn_Click() Handles CacelBtn.Click
+      ' se è stata inserita nel DB allora devo rimuoverla ed esco dalla pagina
+      EgtPHOTOLib.refOptionPanelVM.Delete()
+      ' notifico che il grezzo è stato rimosso 
+      OmagPhotoWD.m_IsDeleted = True
+      ' notifico che il grezzo non è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = False
+      ' elimino l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = ""
+      ' esco dalla pagina
+      m_OmagPhotoWD.Close()
+   End Sub
+
+   Private Sub AddBtn_Click() Handles AddBtn.Click
+      ' se non sono validi i campi allora attendo
+      If Not EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled Then Return
+      ' modalità di funzionamento della libreria: ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.Save()
+      ' notifico che il grezzo è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = True
+      ' salvo l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      ' salvo il nome del blocco che è stato utilizzato
+      If Not EgtPHOTOLib.MainData.bEnableTextId Then
+         WritePrivateProfileString(S_SCRAPS, K_LASTBLOCK, EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock, m_OmagPhotoWD.m_MainWindow.GetIniFile())
+      End If
+      ' aggiorno il testo del messaggio "Add" → "Save"
+      AddBtn.Content = "Save"
+
+      ' notifico che da ora la lastra inserita è in modalità di modifica (non salvo la lastra come nuova, ma la sovrascrivo come in modifica)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SetSelProjectMode(ProjectSlabVM.ProjectModeOpt.DETAIL)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.SetOrigValues()
+
+      ' notifico che la lastra è in modifica da questo programma
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+   End Sub
+
+   Private Sub PrintBtn_Click() Handles PrintBtn.Click
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PrintLabel()
+   End Sub
+#End Region    ' Command
+
+#Region "METHODS"
+   Private Sub EnableButtons()
+      AddBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      ' se la stampante non è abilitata allora non permetto assolutamente di abilitare il comando
+      If EgtPHOTOLib.MainData.bEnablePrinter Then
+         PrintBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      End If
+
+   End Sub
+#End Region    ' Methods
+
+End Class

Project/CurrentProjectPageUC.xaml.vb

@@ -107,7 +107,8 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         If Not CurrentProjectScene.Init() Then
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
             ' Flag per riavvio programma
@@ -158,6 +159,7 @@ Public Class CurrentProjectPageUC
 #End If
             m_MainWindow.Close()
             If bRestart Then Process.Start(Application.ResourceAssembly.Location)
+            Return
          End If
          ' visualizzazione avanzata dei triangoli costituenti le superfici
          Dim bShowTriaAdv As Boolean = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -168,11 +170,6 @@ Public Class CurrentProjectPageUC
          ' dimensione lineare max in pixel delle textures
          Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())
          EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
-         ' Verifico abilitazione prodotto
-         If Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Then
-            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 5), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 1)
-            m_MainWindow.Close()
-         End If
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
@@ -180,42 +177,12 @@ Public Class CurrentProjectPageUC
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
 
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-         ' apro la finstra di selezione di avvio del programma
-         'StartProgram()
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-
-         '' Se richiesto, carico ultimo progetto
-         'Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         'If bAutoLoadLast Then
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-         '   If Not LoadProject(sPath, False) Then
-         '      NewProject()
-         '   End If
-         '   EgtResetModified()
-         '   'Altrimenti ne imposto uno nuovo
-         'Else
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   NewProject()
-         'End If
-
          ' creo nuovo progetto
          m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
 
          ' Nascondo progress per fotografia
          PhotoProgress.Visibility = Windows.Visibility.Hidden
-         ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-            m_MainWindow.CadCutBtn.IsChecked = True
-         Else
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-            m_MainWindow.FrameCutBtn.IsChecked = True
-         End If
 
       Else
          EgtSetCurrentContext(CurrentProjectScene.GetCtx())
@@ -274,8 +241,10 @@ Public Class CurrentProjectPageUC
          m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
          m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
          m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+         ' inizializzo gli oggetti della pagina (non passo dalla funzione Load!)
+         m_MainWindow.m_CadCutPageUC.m_ProjectMgr.SetReference()
 
-      ' seleziono il file dalla lista della finestra (= 4) 
+         ' seleziono il file dalla lista della finestra (= 4) 
       ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.SelectedProject Then
          NewProject()
          Dim sCurrDir As String = Path.GetDirectoryName(MyStartLancherWD.SelPath)
@@ -304,6 +273,21 @@ Public Class CurrentProjectPageUC
          End If
       End If
 
+      ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
+      If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
+         ' Carico sottopagina opportuna
+         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+            m_MainWindow.CadCutBtn.IsChecked = True
+         Else
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
+
+
    End Sub
 
    ' questo metodo è direttamente richiamato in caso di selezione della regione sinistra della pagina
@@ -412,6 +396,8 @@ Public Class CurrentProjectPageUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       m_dRawHeight = 0
       UpdateHeightTxBx()
+      ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
@@ -423,7 +409,7 @@ Public Class CurrentProjectPageUC
          nId2 = EgtGetNextPart(nId2)
       End While
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      SetTotalArea( dTotArea)
+      SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
       ' Dichiaro progetto non modificato
@@ -521,6 +507,20 @@ Public Class CurrentProjectPageUC
       UpdateHeightTxBx()
       ' aggiorno materiale
       m_MainWindow.m_CurrentMachine.SetCurrMatByName(GetProjectMaterial())
+      ' aggiorno altezza sovaratavola
+      If GetPrivateProfileInt(S_GENERAL, "AdditionalTableByProj", 0, m_sIniFile) = 1 Then
+         ' leggo il valore OrigiAdditionalTable
+         Dim dValue As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
+         Select Case GetCurrentTable()
+            Case 3
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+            Case 2
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+            Case Else
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+         End Select
+         m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
+      End If
       ' forzo visualizzazione eventuali dati su aree
       SetAreasStatus( True)
       ' Dichiaro progetto non modificato
@@ -869,7 +869,7 @@ Public Class CurrentProjectPageUC
 
    Friend Function UpdateSideAngCutProbeFlag() As Boolean
       Dim bCurrSacProbe As Boolean =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso m_MainWindow.m_CurrentMachine.IsRawProbingPossible()
       Dim bProjSacProbe As Boolean = GetSideAngCutProbeFlag()
       If bCurrSacProbe <> bProjSacProbe Then Return SetSideAngCutProbeFlag(bCurrSacProbe)
       Return True

Project/OmagPhotoWD.xaml

@@ -0,0 +1,40 @@
+<Window x:Class="OmagPhotoWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:OmagCUT="clr-namespace:OmagCUT"
+        xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"               
+        xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OmagPHOTO" Height="700" Width="1250" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" >
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid Name="OptionSLabGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="10*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
+            
+            <!-- nel codice mi occupo di riempire la griglia con gli UserControl -->
+            
+            <Button Name="ExitBtn" Grid.Column="2" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <DockPanel Grid.Column="1" Grid.Row="1" Visibility="Hidden">
+                <!--StatusBar-->
+                <EgtWPFLib5:StatusBarV DataContext="{StaticResource StatusBarVM}" DockPanel.Dock="Bottom"/>
+            </DockPanel>
+        </Grid>
+    </Border>
+</Window>

Project/OmagPhotoWD.xaml.vb

@@ -0,0 +1,171 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class OmagPhotoWD
+   ' Riferimento alla MainWindow
+   Friend m_MainWindow As MainWindow
+
+   Private m_AddToDataBaseUC As AddToDataBaseUC
+   Private m_StateList As New List(Of EgtWPFLib5.IdNameStruct)
+
+   ' il contorno dell sfrido è definito a partire dai punti che rappresentano i vertici dello stesso
+   Private m_ContornScrap As New List(Of Point3d)
+   ' se lo stato della lastra è "2" significa che è già stata inserita nel DB (non devo generare una nuova foto!)
+   Private m_nState As Integer = 1
+   ' salvo il nome del file *.jpg 
+   Private m_sFileImage As String = String.Empty
+
+   ' definsce se il slavataggio è andato a buon fine (questa variabile deve esistere anche dopo la chiusura della finestra!)
+   Public Shared m_IsAdded As Boolean = False
+   Public Shared m_sDtBsId As String = ""
+   Public Shared m_bSlabIsSelected As Boolean = False
+
+   ' definisce se il grezzo è stato eliminato dal DB
+   Public Shared m_IsDeleted As Boolean = False
+
+   Public Sub New(sImage As String, ContornScrap As List(Of Point3d), MnWindow As MainWindow, nState As Integer, DatabaseID As String)
+
+      InitializeComponent()
+
+      ' salvo il riferimento della finestra principale
+      m_MainWindow = MnWindow
+      ' leggo lo stato dello sfrido per decidere quale modalità di apertuta usare
+      m_nState = nState
+
+      '--------------- CARCICO lastra esistente ---------------
+      If m_nState = 2 Then
+         m_bSlabIsSelected = False
+         ' ricerco l'elemento già inserito nel DB
+         For Each Item As Slab In EgtPHOTOLib.refProjectVM.SlabList
+            Dim CurrId As String = Item.GetCurrentID.Trim
+            If Item.GetCurrentID.Trim = DatabaseID.Trim Then
+               EgtPHOTOLib.refProjectVM.SelSlab = Item
+               m_bSlabIsSelected = True
+               Exit For
+            End If
+         Next
+         ' se non trovo nessun elemento nel db allora esco
+         If IsNothing(EgtPHOTOLib.refProjectVM.SelSlab) Then
+            EgtOutLog("ID is not found in database: " & DatabaseID)
+            m_bSlabIsSelected = False
+            Return
+         End If
+         ' procedo alla visualizzazione della pagina
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.DETAIL
+         ' carico la lista degli stati letta dalla libreria
+         For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+            m_StateList.Add(Item)
+         Next
+
+         ' notifico che la lastra è in modifica da questo programma
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+
+         ' posiziono la finestra
+         Me.Top = 15
+         Me.Left = 15
+         Return
+      End If
+
+      '--------------- DEFINSCO nuova lastra esistente ---------------
+      ' imposto come prima pagina sempre la lista (per inizializzare gli elementi della libreria) → ACCELERARE il processo di creazione di questo oggetto!
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      ' imposto il percoso della foto appena generato
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ImagePath = sImage
+      ' carico la foto come texture
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PostPhoto(sImage, "")
+      ' carico l'elenco dei materiali (non serve...)
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SetMaterialFromDB()
+      ' definisco la lista degli stati
+      For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+         m_StateList.Add(Item)
+      Next
+
+      ' imposto i dati lastra
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight
+      ' carico la lista degli stati letta dalla libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelState = EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList(0)
+      ' ricorco il materiale corrente nell'elenco dei materiali presenti nel DB (se non presente nell'elenco?)
+      For Each MaterialItem As String In EgtPHOTOLib.PhotoMap.refOptionPanelVM.MaterialList
+         If MaterialItem.ToLower = m_MainWindow.m_CurrentMachine.CurrMat.sName.ToLower Then
+            EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material = MaterialItem
+            Exit For
+         End If
+      Next
+
+      ' salvo in locale i punti che arrivano dal progetto
+      m_ContornScrap = ContornScrap
+      ' avvio la finestra di modifica
+      Dim m_refImagePrevieV As New EgtPHOTOLib.ImagePreviewV()
+      ' modifico l'immagine e salvo
+      m_refImagePrevieV.SetContourScraps(m_ContornScrap)
+      m_refImagePrevieV.Show()
+      m_refImagePrevieV.SaveImage()
+      m_refImagePrevieV.Close()
+      m_bSlabIsSelected = True
+
+      ' posiziono la finestra
+      Me.Top = 15
+      Me.Left = 15
+   End Sub
+
+   ' posizionamento degli UserControl all'interno della griglia
+   Private Sub OmagPhotoWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' definisco nella pagina la posizione dello UserControl e inizializzo le liste
+      m_AddToDataBaseUC = New AddToDataBaseUC(Me)
+      m_AddToDataBaseUC.SetValue(Grid.ColumnProperty, 0)
+      m_AddToDataBaseUC.SetValue(Grid.RowProperty, 1)
+      m_AddToDataBaseUC.SetValue(Grid.RowSpanProperty, 2)
+      Me.OptionSLabGrid.Children.Add(m_AddToDataBaseUC)
+      m_AddToDataBaseUC.StateCmBx.ItemsSource = m_StateList
+      ' recupero la scena dalla libreria e la carico nel finestra
+      Dim MyScene As New EgtPHOTOLib.SceneHostSlabV(EgtPHOTOLib.PhotoMap.refSceneHostVM)
+      MyScene.SetValue(Grid.ColumnProperty, 1)
+      MyScene.SetValue(Grid.ColumnSpanProperty, 2)
+      MyScene.SetValue(Grid.RowProperty, 1)
+      Me.OptionSLabGrid.Children.Add(MyScene)
+   End Sub
+
+   ' carcio i dati della lastra
+   Private Sub PostLoaded() Handles Me.Loaded
+      If Not m_bSlabIsSelected Then
+         Return
+      End If
+      ' carico i campi con i dati letti da database
+      If m_nState = 2 Then
+         ' provo ad eseguire la separazione dei campi 
+         m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+         m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+         m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+         m_AddToDataBaseUC.StateCmBx.SelectedIndex = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State
+         m_AddToDataBaseUC.MatTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material
+         m_AddToDataBaseUC.ThicknessTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness
+         m_AddToDataBaseUC.ProjectTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo
+         ' aggiorno il testo del messaggio "Add" → "Save"
+         m_AddToDataBaseUC.AddBtn.Content = "Save"
+         Return
+      End If
+      ' inizializzo i campi
+      'm_AddToDataBaseUC.IdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+      m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      m_AddToDataBaseUC.StateCmBx.SelectedIndex = 0
+      m_AddToDataBaseUC.MatTxBx.Text = m_MainWindow.m_CurrentMachine.CurrMat.sName
+      m_AddToDataBaseUC.ThicknessTxBx.Text = LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 4)
+      m_AddToDataBaseUC.ProjectTxBx.Text = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()
+      ' rendo in primo piano la finestra
+      Me.Activate()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' se esista una lastra corrente, notifico che deve essere deselezionata
+      If Not IsNothing(EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab) Then
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.IsSelected = 0
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+      End If
+      Me.Close()
+   End Sub
+
+End Class

Project/OpenPageUC.xaml

@@ -2,7 +2,8 @@
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"          
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="OpenPage_Initialized" Loaded="OpenPage_Loaded" Unloaded="OpenPage_Unloaded">
       
@@ -17,22 +18,42 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
          
-         <!-- Definizione della Grid Inferiore per i Button V e X -->
+         <!-- Definizione della Grid Superiore -->
          <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="5*"/>
                <ColumnDefinition Width="7*"/>
             </Grid.ColumnDefinitions>
-            
+       
          </Grid>
 
-         <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-            ItemsSource="{Binding ItemList}"/>
-         
+         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            
+          <Grid Grid.Row="1" Grid.RowSpan="2">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="6.5*"/>
+                    <RowDefinition Height="0.65*"/>
+                </Grid.RowDefinitions>
+                <ListBox Name="FileListBox"  ItemTemplate="{DynamicResource DataTemplateItem}"
+                  ItemsSource="{Binding ItemList}"/>
+
+                <Grid Grid.Row="1" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid>
+
+            </Grid>
+          
          <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
             <TextBlock Name="MessageTxBx"  TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>

Project/OpenPageUC.xaml.vb

@@ -38,6 +38,7 @@ Public Class OpenPageUC
       OpenSceneHost.SetValue(Grid.ColumnProperty, 1)
       OpenSceneHost.SetValue(Grid.RowProperty, 2)
       ' OpenSceneHost.SetValue(Grid.RowSpanProperty, 1)
+      OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
       Me.OpenPageGrid.Children.Add(OpenSceneHost)
 
       ' Definizione del collegamento tra ItemList e ListBox1
@@ -203,6 +204,36 @@ Public Class OpenPageUC
       End If
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()

Project/ProjectMgrUC.xaml.vb

@@ -34,9 +34,7 @@ Public Class ProjectMgrUC
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Impostazioni
-      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
-      m_CurrMachine = m_MainWindow.m_CurrentMachine
-      m_CurrNcComm = m_MainWindow.m_CNCommunication
+      SetReference()
 
       ' Se richiesto carico finestra per VeinMatching e ultimo intarsio
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) And
@@ -55,6 +53,12 @@ Public Class ProjectMgrUC
       End If
    End Sub
 
+   Public Sub SetReference()
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_CurrMachine = m_MainWindow.m_CurrentMachine
+      m_CurrNcComm = m_MainWindow.m_CNCommunication
+   End Sub
+
    Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -248,6 +252,12 @@ Public Class ProjectMgrUC
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -349,6 +359,14 @@ Public Class ProjectMgrUC
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
+      ' se esiste salvo il nome del progetto
+      Dim sCurrProjName As String = String.Empty
+      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrProjName, m_MainWindow.GetIniFile())
+      If Not String.IsNullOrEmpty(sCurrProjName) Then
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME, sCurrProjName)
+      Else
+         EgtRemoveInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME)
+      End If
 
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
@@ -466,20 +484,29 @@ Public Class ProjectMgrUC
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
-               ''-------------------Avvio il Ciclo-Start-------------------------
-               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
-               'MyCicloStartWD.ShowDialog()
-               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
 
-         '-------------------Avvio il Ciclo-Start-------------------------
-         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
+         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
             Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
             MyCicloStartWD.ShowDialog()
          End If
+         '------------------- FINE Avvio il Ciclo-Start-------------------------
 
-         '-------------------Avvio il Ciclo-Start-------------------------
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
 
          ' Altrimenti linea di produzione
       Else
@@ -652,6 +679,32 @@ Public Class ProjectMgrUC
 #End If
    End Sub
 
+   ' aggiorno la lista dei grezzi/sfridi
+   Public Sub UpDateScrapList(ByRef NewScrapsList As List(Of Scrap))
+      If IsNothing(NewScrapsList) Then
+         NewScrapsList = New List(Of Scrap)
+      Else
+         NewScrapsList.Clear()
+      End If
+      ' procedo all'aggiornamento della lista degli sfridi
+      Dim CurrRawId As Integer = EgtGetFirstRawPart()
+      Dim IsNewScraps As Integer = 0
+      Dim nCountScrap As Integer = 1
+      While CurrRawId <> GDB_ID.NULL
+         If EgtGetInfo(CurrRawId, K_ISNEWSCRAPS, IsNewScraps) Then
+            If IsNewScraps = 1 Or IsNewScraps = 2 Then
+               ' deve essere aggiunto nel DB delle lastre come nuovo grezzo (l'indice è utilizzato per definire il nome della lastra)
+               NewScrapsList.Add(New Scrap(CurrRawId, "Scrap_" & nCountScrap.ToString, IsNewScraps))
+               nCountScrap += 1
+               ' è già stato aggiunto al DB delle lastre come nuovo grezzo
+            Else
+               ' non  è stato definito come nuovo grezzo
+            End If
+         End If
+         CurrRawId = EgtGetNextRawPart(CurrRawId)
+      End While
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
@@ -742,7 +795,7 @@ Public Class ProjectMgrUC
       Else
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
       ' aggiorno il disegno
       EgtDraw()
@@ -925,3 +978,60 @@ Public Class ProjectMgrUC
    End Sub
 
 End Class
+
+Public Class Scrap
+
+   Private m_iPictureID As Integer
+   Private m_sName As String
+   Private m_IdRaw As Integer
+   Private m_nState As Integer
+
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
+
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Public ReadOnly Property IdRaw() As Integer
+      Get
+         Return m_IdRaw
+      End Get
+   End Property
+
+   Public ReadOnly Property nState As Integer
+      Get
+         Return m_nState
+      End Get
+   End Property
+
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
+
+   Sub New(IdScrap As Integer, NameScrap As String, State As Integer)
+      m_IdRaw = IdScrap
+      m_sName = NameScrap
+      m_nState = State
+      ' immagine del grezzo
+      If m_nState = 2 Then
+         m_iPictureID = 5
+      Else
+         m_iPictureID = 4
+      End If
+   End Sub
+
+End Class

Project/ScrapsWD.xaml

@@ -0,0 +1,50 @@
+<Window x:Class="ScrapsWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="Scraps" Height="482.6" Width="226.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="3*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Label Name="TitleTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
+            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+               ItemsSource="{Binding ItemList, NotifyOnSourceUpdated=True}"/>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

Project/ScrapsWD.xaml.vb

@@ -0,0 +1,186 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class ScrapsWD
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refProjectMgrUC As ProjectMgrUC
+
+   Private m_ScrapList As New List(Of Scrap)
+   Private m_CurrScrapId As Integer = GDB_ID.NULL
+   Private m_CurrScrapState As Integer = 2
+   Private m_sDatabaseId As String = ""
+
+   Private Sub Initalized()
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+
+      ' inserisco il titolo della pagina aperta
+      TitleTxBl.Content = "Scraps List"
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ' definzione posizione finetra
+      Me.Left = 25
+      Me.Top = 25
+   End Sub
+
+   Public Sub New(Owner As Window, LocalProjectMgrUC As ProjectMgrUC, MyScrapList As List(Of Scrap))
+      Me.Owner = Owner
+      InitializeComponent()
+      m_ScrapList = MyScrapList
+      m_refProjectMgrUC = LocalProjectMgrUC
+      Initalized()
+   End Sub
+
+
+   ' visualizzo la fase del pezzo selezionato
+   Private Sub ScrapListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ScrapsListBox.PreviewMouseUp
+      Dim vItems As Scrap = ScrapsListBox.SelectedItems(0)
+      ' elimino l'utimo selzione
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' ricerco il grezzo associato a questo Id
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         If nRawId = vItems.IdRaw Then
+            m_CurrScrapId = nRawId
+            m_CurrScrapState = vItems.nState
+            If m_CurrScrapState = 2 Then
+               EgtGetInfo(nRawId, K_DATABASEID, m_sDatabaseId)
+            Else
+               m_sDatabaseId = String.Empty
+            End If
+            Dim nCurrRawPhase As Integer = 0
+            ' recupero la fase del grezzo corrente
+            EgtGetInfo(nRawId, "Ph", nCurrRawPhase)
+            If nCurrRawPhase <> 0 Then
+               ' evidenzio lo sfrido selezionato all'interno della fase
+               EgtSetCurrPhase(nCurrRawPhase)
+               EgtSetMark(m_CurrScrapId)
+               EgtSelectObj(m_CurrScrapId)
+               EgtDraw()
+               Return
+            End If
+         End If
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      If m_CurrScrapId = GDB_ID.NULL Then Return
+      ' creo una copia dell'immagine attuale (fotocamera 1)
+      Dim sImage As String = String.Empty
+      Dim sInfo As String = String.Empty
+      GetPrivateProfileString(S_CAMERA, K_CAM_IMAGE, "", sImage, m_MainWindow.GetIniFile())
+      GetPrivateProfileString(S_CAMERA, K_CAM_INFO, "", sInfo, m_MainWindow.GetIniFile())
+      ' recupero dalla libreria il percoso del database
+      Dim sPhotoDir As String = String.Empty
+      EgtPHOTOLib.GetPhotoDir(sPhotoDir)
+      ' recupero l'ora corrente
+      Dim sDate As String = Date.Now.ToString
+      sDate = sDate.Replace("/", "_")
+      sDate = sDate.Replace(" ", "_")
+      sDate = sDate.Replace(":", "_")
+      Dim sNewPath As String = sPhotoDir & "\Scrap_" & sDate
+      Try
+         File.Copy(sImage, sNewPath & ".jpg", False)
+         File.Copy(sInfo, sNewPath & ".txt", False)
+      Catch ex As Exception
+         EgtOutLog(ex.Message.ToString)
+      End Try
+
+      ' se non esiste la classe StatusBar allora provo ad inizializzarla...
+      If IsNothing(EgtWPFLib5.LibMap.refStatusBarVM) Then
+         Dim objStatusBarVM As New EgtWPFLib5.StatusBarVM
+      End If
+      ' salvo il contesto corrente del programma
+      Dim nCurrentContetxt As Integer = EgtGetCurrentContext()
+      ' costruisco l'elenco ordinato dei punti che reppresentano il contorno del grezzo da salvare
+      Dim ContornScrapList As New List(Of Point3d)
+
+      Dim RefId As New Frame3d
+      Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawSolid")
+      EgtGetTextureFrame(nRawSolidId, nRawSolidId, RefId)
+      Dim nCurveCompoId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawOutline")
+      Dim dStart As Double = 0
+      Dim dEnd As Double = 0
+      EgtCurveDomain(nCurveCompoId, dStart, dEnd)
+      Dim ptCurrPoint As Point3d
+      For dU As Integer = dStart To dEnd - 1
+         EgtAtParamPoint(nCurveCompoId, dU, m_CurrScrapId, ptCurrPoint)
+         ptCurrPoint.z = 0
+         ptCurrPoint.ToLoc(RefId)
+         ContornScrapList.Add(ptCurrPoint)
+      Next
+
+      MainData.SetPreviousContext(nCurrentContetxt)
+
+      'If Not IsNothing(MainData.ContextSTONELib) Or MainData.ContextSTONELib <> 0 Then
+      'If MainData.ContextSTONELib <> 0 Then
+      '   EgtSetCurrentContext(MainData.ContextSTONELib)
+      'End If
+
+      ' inizializzo PojectSlabV pechè si occupa di inizializzare le pagine Detail e Option 
+      Dim MyProjectSlab As New EgtPHOTOLib.ProjectSlabV
+      ' ACCELERARE il processo di creazione di questo oggetto!
+      MyProjectSlab.DataContext = New EgtPHOTOLib.ProjectSlabVM
+      ' per ogni creazione della nuova pagina viene creata una nuova scena, ma non viene eliminata
+      Dim refProjectVMSceneContext As Integer = EgtGetCurrentContext()
+
+      ' apro la finestra OmagPHOTO (passo il nome del file come copia dell'originale)
+      If ContornScrapList.Count > 2 Then
+         Dim MyOmagPhotoWD As New OmagPhotoWD(sNewPath & ".jpg", ContornScrapList, m_MainWindow, m_CurrScrapState, m_sDatabaseId)
+         OmagPhotoWD.m_IsAdded = False
+         OmagPhotoWD.m_sDtBsId = String.Empty
+         OmagPhotoWD.m_IsDeleted = False
+         MyOmagPhotoWD.ShowDialog()
+      Else
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Error loading contour scrap")
+      End If
+
+      ' ripristino il contesto corrente dell'immagine
+      EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
+      ' se l'inserimento è andatoa buon fine allora procedo a notificarlo
+      If OmagPhotoWD.m_IsAdded AndAlso Not String.IsNullOrEmpty(OmagPhotoWD.m_sDtBsId) Then
+         EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 2)
+         EgtSetInfo(m_CurrScrapId, K_DATABASEID, OmagPhotoWD.m_sDtBsId)
+      Else
+         ' se è stato eliminato dal DB allora aggiorno la lista dei grezzi
+         If OmagPhotoWD.m_IsDeleted Then
+            EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 1)
+            EgtRemoveInfo(m_CurrScrapId, K_DATABASEID)
+         End If
+         Try
+            File.Delete(sNewPath & ".jpg")
+            File.Delete(sNewPath & ".txt")
+         Catch ex As Exception
+            EgtOutLog(ex.Message.ToString)
+         End Try
+      End If
+
+      '----------------INIZIO ELIMINAZIONE contesti generati da OmagPHOTOLib per la visualizzazione delle Texture
+      EgtDeleteContext(EgtPHOTOLib.MainData.ContextSTONELib)
+      EgtDeleteContext(refProjectVMSceneContext)
+      '----------------  FINE ELIMINAZIONE contesti
+
+      ' aggiorno la lista degli scrap
+      m_refProjectMgrUC.UpDateScrapList(m_ScrapList)
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ScrapsListBox.Items.Refresh()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' deseleziono l'oggetto corrente
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' reimposto la fase iniziale
+      EgtSetCurrPhase(1)
+      EgtDraw()
+      Me.Close()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml.vb

@@ -45,9 +45,9 @@ Public Class RawPartPageUC
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
    ' Definizione lista modalità di definizione grezzo per ComboBox
-   Private m_RawModeList(2) As String
-   Private m_RawModeDamagedList(1) As String
-   Private m_RawModeListEx(3) As String
+   Private m_RawModeList(3) As String
+   Private m_RawModeDamagedList(2) As String
+   Private m_RawModeListEx(4) As String
    ' Variabile che indica la zona danneggiata selezionata
    Private m_nSelDmg As Integer
    ' Array per modalità per punti
@@ -63,6 +63,8 @@ Public Class RawPartPageUC
    Private m_CurveXDamagedAreaList As New List(Of Integer)
    ' Flag che indica se è in corso la definizione tramite laser o se il grezzo è già chiuso
    Private m_bIsRawDefiningByLaser As Boolean = False
+   ' Flag che indica se è in corso la definizione tramite lama o se il grezzo è già chiuso
+   Private m_bIsRawDefiningBySaw As Boolean = False
    ' Flag di tastatura in corso
    Private m_bProbingOn As Boolean = False
    ' Flag inserimento punti laser da disegno
@@ -99,6 +101,8 @@ Public Class RawPartPageUC
       FROM_PHOTO = 3
       DAMAGED = 4
       DAMAGED_BY_LASER = 5
+      DAMAGED_BY_SAW = 6
+      FROM_SAW = 7
    End Enum
 
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
@@ -123,14 +127,32 @@ Public Class RawPartPageUC
       m_RawModeList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)           'Rettangolo
       m_RawModeList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)           'Per Punti
       m_RawModeList(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)          'Da Laser
+      If m_MainWindow.m_CurrentMachine.bSaw Then
+         m_RawModeList(3) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)        'Da Lama
+      Else
+         ' se non insrisco "Lama" allora ridimensiono il vettore
+         ReDim Preserve m_RawModeList(2)
+      End If
       m_RawModeListEx(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)         'Rettangolo
       m_RawModeListEx(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)         'Per Punti
       m_RawModeListEx(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)        'Da Laser
-      m_RawModeListEx(3) = EgtMsg(MSG_RAWPARTPAGEUC + 35)        'Da Fotografia
+      If m_MainWindow.m_CurrentMachine.bSaw Then
+         m_RawModeListEx(3) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)      'Da Lama
+         m_RawModeListEx(4) = EgtMsg(MSG_RAWPARTPAGEUC + 35)        'Da Fotografia
+      Else
+         ' se non insrisco "Lama" allora ridimensiono il vettore
+         m_RawModeListEx(3) = EgtMsg(MSG_RAWPARTPAGEUC + 35)        'Da Fotografia
+         ReDim Preserve m_RawModeListEx(3)
+      End If
       RawModeCmBx.ItemsSource = m_RawModeList
       ' lista per selezione RawModeDamaged
       m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
       m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
+      If m_MainWindow.m_CurrentMachine.bSaw Then
+         m_RawModeDamagedList(2) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24) 'Da Lama
+      Else
+         ReDim Preserve m_RawModeDamagedList(1)
+      End If
       RawModeDamagedCmBx.ItemsSource = m_RawModeDamagedList
 
       ' Nascondo bottone tastatura lastra se disattivato da file .ini
@@ -142,7 +164,7 @@ Public Class RawPartPageUC
                    GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
       SlabIdBtn.Visibility = If(m_bSlabId, Windows.Visibility.Visible, Windows.Visibility.Collapsed)
 
-      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, "SmartMachiningPage", 0, m_MainWindow.GetIniFile()) <> 0
+      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, K_SMARTMACHININGPAGE, 0, m_MainWindow.GetIniFile()) <> 0
 
       ' Imposto i messaggi letti dal file dei messaggi
       OutlineBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 33)       'Rectangle - Rettangolo
@@ -309,9 +331,10 @@ Public Class RawPartPageUC
       ' Verifico cosa selezionato
       Dim nSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
       Dim nKerfId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_KERF)
+
       '----------------------------------------- INIZIO ------------------ se decido di inserire i punti laser manualmente --------------------------------------------------
-      ' se decido di inserire i punti laser manualmente
-      If m_bFromDraw And m_ActiveRawMode = RAWMODE.FROM_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Then
+      ' se decido di inserire i punti laser manualmente (in assenza di collegamento con CN)
+      If m_bFromDraw AndAlso (m_ActiveRawMode = RAWMODE.FROM_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.FROM_SAW Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW) Then
          ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
          EgtEmptyGroup(m_nTempLay)
          ' Acquisisco punto da disegno
@@ -336,6 +359,7 @@ Public Class RawPartPageUC
          Return
       End If
       '-----------------------------------------  FINE  ------------------ se decido di inserire i punti laser manualmente --------------------------------------------------
+      ' recupero elemento selezionato nella scena
       EgtSetObjFilterForSelWin(True, True, True, True, True)
       Dim nSel As Integer
       EgtSelect(e.Location, 2 * Scene.DIM_SEL, 2 * Scene.DIM_SEL, nSel)
@@ -349,8 +373,7 @@ Public Class RawPartPageUC
             m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev)
             m_nDragEnt = -1
             m_dDragPar = -1
-         ElseIf sName = NAME_KERF And
-                (m_ActiveRawMode = RAWMODE.RECTANGLE Or m_ActiveRawMode = RAWMODE.BY_POINTS) Then
+         ElseIf sName = NAME_KERF And (m_ActiveRawMode = RAWMODE.RECTANGLE Or m_ActiveRawMode = RAWMODE.BY_POINTS) Then
             m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev)
             Dim dDist, dU As Double
             If Not EgtPointCurveDist(m_ptPrev.Loc(nKerfId), nKerfId, nKerfId, dDist, dU) Then
@@ -360,7 +383,7 @@ Public Class RawPartPageUC
             m_dDragPar = dU
             ' Privilegio il kerf, pertanto esco
             Exit While
-         ElseIf sName = NAME_DAMAGED And (m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER) Then
+         ElseIf sName = NAME_DAMAGED And (m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.BY_POINTS) Then
             m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev)
             Dim dDist, dU As Double
             If Not EgtPointCurveDist(m_ptPrev.Loc(nSelId), nSelId, nSelId, dDist, dU) Then
@@ -377,6 +400,7 @@ Public Class RawPartPageUC
          End If
          nSelId = EgtGetNextObjInSelWin()
       End While
+
       ' se drag e modalità punti
       If m_bDrag And m_ActiveRawMode = RAWMODE.BY_POINTS Then
          ' se aggiungi punto
@@ -413,7 +437,7 @@ Public Class RawPartPageUC
             End If
          End If
          ' se drag e modalità zona danneggiata
-      ElseIf m_bDrag And (m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER) Then
+      ElseIf m_bDrag And (m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW) Then
          ' se aggiungi zona rovinata
          If m_nPtDmgMode = DMGMODE.ADD Then
             AddNewDamagedArea()
@@ -489,6 +513,8 @@ Public Class RawPartPageUC
       End Select
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBRidges()
    End Sub
 
    Private Sub ModifyRectangle(ptCurr As Point3d)
@@ -665,6 +691,8 @@ Public Class RawPartPageUC
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       ' Non è possibile uscire con tastatura in corso
       If m_bProbingOn Then Return
+      ' reimposto il comando OutLine
+      OutlineBtn_Click(Nothing, Nothing)
       ' Se confermata uscita
       If ExitRawPart(True) Then
          m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Remove(Me)
@@ -696,6 +724,16 @@ Public Class RawPartPageUC
             CloseDamagedAreaByLaser()
          End If
       End If
+      If m_ActiveRawMode = RAWMODE.FROM_SAW Then
+         If m_bIsRawDefiningBySaw Then
+            CloseRawBySaw()
+         End If
+      End If
+      If m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
+         If m_bIsRawDefiningBySaw Then
+            CloseDamagedAreaBySaw()
+         End If
+      End If
       ' Apro pagina di selezione della lavorazione prima di chiudere il grezzo
       m_ChooseMachiningPage = New ChooseMachining(m_MainWindow)
       '--------------------------- SELEZIONE LAVORAZIONI ---------------------------------
@@ -779,6 +817,8 @@ Public Class RawPartPageUC
          Case 0          ' Rettangolo
             ' Se ero in modalità da laser
             VerifyLaserDefining()
+            ' Se ero in modalità da Lama
+            VerifySawDefinig()
             ' Verificos e sto realmente cambiando modalità
             Dim bChanging As Boolean = (m_ActiveRawMode <> RAWMODE.RECTANGLE)
             ' Imposto nuova modalità
@@ -790,6 +830,8 @@ Public Class RawPartPageUC
          Case 1          ' Punti
             ' Se ero in modalità da laser
             VerifyLaserDefining()
+            ' Se ero in modalità da Lama
+            VerifySawDefinig()
             ' Imposto nuova modalità
             m_ActiveRawMode = RAWMODE.BY_POINTS
             ' Riattivo i controlli in base a quale modalità di inserimento contorni è attiva
@@ -797,6 +839,8 @@ Public Class RawPartPageUC
             UpdateCircles()
             EgtDraw()
          Case 2          ' Da laser
+            ' Se ero in modalità da Lama
+            VerifySawDefinig()
             ' Imposto nuova modalità
             m_ActiveRawMode = RAWMODE.FROM_LASER
             RemoveCircles()
@@ -811,10 +855,44 @@ Public Class RawPartPageUC
             ' Disattivo il bottone
             CloseBtn.IsEnabled = False
             OkBtn.IsEnabled = False
-         Case 3          ' Da fotografia
+         Case 3          ' Da Lama
+            If Not m_MainWindow.m_CurrentMachine.bSaw Then    ' Da fotografia
+               ' Se ero in modalità da laser
+               VerifyLaserDefining()
+               ' Se ero in modalità da Lama
+               VerifySawDefinig()
+               ' Imposto nuova modalità
+               m_ActiveRawMode = RAWMODE.FROM_PHOTO
+               ' Riattivo i controlli in base a quale modalità di inserimento contorni è attiva
+               RawModeView()
+               RemoveCircles()
+               ' Creo il grezzo dal contorno riconosciuto nella fotografia
+               CreateRawFromPhotoContour()
+               EgtDraw()
+               Exit Select
+            End If
             ' Se ero in modalità da laser
             VerifyLaserDefining()
             ' Imposto nuova modalità
+            m_ActiveRawMode = RAWMODE.FROM_SAW
+            RemoveCircles()
+            LoadFromMachine()
+            ' Azzero lista e punto di partenza
+            m_CurveXKerfList.Clear()
+            m_bptLast = False
+            ' Segno flag che indica definizione grezzo con laser in corso
+            m_bIsRawDefiningBySaw = True
+            ' Riattivo i controlli in base a quale modalità di inserimento contorni è attiva
+            RawModeView()
+            ' Disattivo il bottone
+            CloseBtn.IsEnabled = False
+            OkBtn.IsEnabled = False
+         Case 4          ' Da fotografia
+            ' Se ero in modalità da laser
+            VerifyLaserDefining()
+            ' Se ero in modalità da Lama
+            VerifySawDefinig()
+            ' Imposto nuova modalità
             m_ActiveRawMode = RAWMODE.FROM_PHOTO
             ' Riattivo i controlli in base a quale modalità di inserimento contorni è attiva
             RawModeView()
@@ -822,6 +900,7 @@ Public Class RawPartPageUC
             ' Creo il grezzo dal contorno riconosciuto nella fotografia
             CreateRawFromPhotoContour()
             EgtDraw()
+
       End Select
    End Sub
 
@@ -831,6 +910,8 @@ Public Class RawPartPageUC
             m_ActiveRawMode = RAWMODE.DAMAGED
          Case 1          ' Da laser
             m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
+         Case 2          ' Da Lama
+            m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW
       End Select
       RawModeView()
       EgtDraw()
@@ -927,11 +1008,43 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+         Case RAWMODE.DAMAGED_BY_SAW
+            RawModeCmBx.IsEnabled = True
+            RawModeDamagedCmBx.Visibility = Visibility.Visible
+            LengthTxBx.IsEnabled = False
+            WidthTxBx.IsEnabled = False
+            OffsetXTxBx.IsEnabled = False
+            OffsetYTxBx.IsEnabled = False
+            ' Visualizzo bottoni per laser            
+            PointsGpBx.Visibility = Windows.Visibility.Visible
+            PointsGpBx.SetValue(Grid.RowSpanProperty, 2)
+            AddBtn.SetValue(Grid.RowSpanProperty, 1)
+            RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
+            CloseBtn.Visibility = Windows.Visibility.Visible
+            ' Disattivo bottoni zone rovinate e foto
+            DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
+            ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+         Case RAWMODE.FROM_SAW
+            RawModeCmBx.IsEnabled = True
+            RawModeDamagedCmBx.Visibility = Visibility.Collapsed
+            LengthTxBx.IsEnabled = False
+            WidthTxBx.IsEnabled = False
+            OffsetXTxBx.IsEnabled = False
+            OffsetYTxBx.IsEnabled = False
+            ' Visualizzo bottoni per lama            
+            PointsGpBx.Visibility = Windows.Visibility.Visible
+            PointsGpBx.SetValue(Grid.RowSpanProperty, 2)
+            AddBtn.SetValue(Grid.RowSpanProperty, 1)
+            RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
+            CloseBtn.Visibility = Windows.Visibility.Visible
+            ' Disattivo bottoni zone rovinate e foto
+            DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
+            ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
       End Select
    End Sub
 
    Private Sub OutlineBtn_Click(sender As Object, e As RoutedEventArgs) Handles OutlineBtn.Click
-      If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Then
+      If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
          ' m_ActiveRawMode = RAWMODE.BY_POINTS
          m_ActiveRawMode = m_PrecActiveRawMode
          RawModeCmBx.SelectedIndex = m_ActiveRawMode
@@ -946,6 +1059,9 @@ Public Class RawPartPageUC
       If m_PrecActiveRawMode = RAWMODE.FROM_LASER Then
          m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
          RawModeDamagedCmBx.SelectedIndex = 1
+      ElseIf m_PrecActiveRawMode = RAWMODE.FROM_SAW Then
+         m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW
+         RawModeDamagedCmBx.SelectedIndex = 2
       Else
          m_ActiveRawMode = RAWMODE.DAMAGED
          RawModeDamagedCmBx.SelectedIndex = 0
@@ -1010,6 +1126,54 @@ Public Class RawPartPageUC
             End If
             AddBtn.IsChecked = False
             EgtDraw()
+         Case RAWMODE.FROM_SAW
+            Dim ptAcquired As Point3d
+            ' Se inserimento manuale dei punti laser
+            If m_bFromDraw Then
+               If Not IsNothing(m_ptPrev) Then
+                  ptAcquired = m_ptPrev
+                  ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+               Else
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+               ' altrimenti da macchina
+            Else
+               If Not AcquireSawPoint(ptAcquired) Then
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+            End If
+            ' Limito il punto a stare nella tavola con franco pari al kerf
+            If ptAcquired.x < m_RawKerf Then ptAcquired.x = m_RawKerf + SAFE_RAW_DIST
+            If ptAcquired.y < m_RawKerf Then ptAcquired.y = m_RawKerf + SAFE_RAW_DIST
+            If ptAcquired.x > m_dTableLength - m_RawKerf Then ptAcquired.x = m_dTableLength - m_RawKerf - SAFE_RAW_DIST
+            If ptAcquired.y > m_dTableWidth - m_RawKerf Then ptAcquired.y = m_dTableWidth - m_RawKerf - SAFE_RAW_DIST
+            ' Aggiusto Z punto movimentato (è in locale al tavolo)
+            ptAcquired.z = m_CurrentMachine.dAdditionalTable + m_RawHeight
+            'Porto il punto nel riferimento del grezzo
+            Dim frRaw As New Frame3d
+            EgtGetGroupGlobFrame(m_CurrProjPage.m_nRawId, frRaw)
+            ptAcquired.LocToLoc(New Frame3d(m_ptTableMin), frRaw)
+            m_ptPrev.LocToLoc(New Frame3d(m_ptTableMin), frRaw)
+            If m_bptLast Then
+               If Point3d.SameApprox(ptAcquired, m_ptLast) Then
+                  AddBtn.IsChecked = False
+                  Exit Sub
+               End If
+               Dim NewLine As Integer = EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptAcquired)
+               EgtSetColor(NewLine, m_KerfCol)
+               m_CurveXKerfList.Add(NewLine)
+            Else
+               m_bptLast = True
+            End If
+            m_ptLast = ptAcquired
+            If m_CurveXKerfList.Count > 1 Then
+               OkBtn.IsEnabled = True
+               CloseBtn.IsEnabled = True
+            End If
+            AddBtn.IsChecked = False
+            EgtDraw()
          Case RAWMODE.DAMAGED
             ' Verifico ci sia almeno una zona rovinata
             If EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_DAMAGED) = GDB_ID.NULL Then
@@ -1068,6 +1232,54 @@ Public Class RawPartPageUC
             End If
             AddBtn.IsChecked = False
             EgtDraw()
+         Case RAWMODE.DAMAGED_BY_SAW
+            Dim ptAcquired As Point3d
+            ' Se inserimento manuale dei punti laser
+            If m_bFromDraw Then
+               If Not IsNothing(m_ptPrev) Then
+                  ptAcquired = m_ptPrev
+                  ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+               Else
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+               ' altrimenti da macchina
+            Else
+               If Not AcquireSawPoint(ptAcquired) Then
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+            End If
+            ' Limito il punto a stare nella tavola con franco pari al kerf
+            If ptAcquired.x < m_RawKerf Then ptAcquired.x = m_RawKerf + SAFE_RAW_DIST
+            If ptAcquired.y < m_RawKerf Then ptAcquired.y = m_RawKerf + SAFE_RAW_DIST
+            If ptAcquired.x > m_dTableLength - m_RawKerf Then ptAcquired.x = m_dTableLength - m_RawKerf - SAFE_RAW_DIST
+            If ptAcquired.y > m_dTableWidth - m_RawKerf Then ptAcquired.y = m_dTableWidth - m_RawKerf - SAFE_RAW_DIST
+            ' Aggiusto Z punto movimentato (è in locale al tavolo)
+            ptAcquired.z = m_CurrentMachine.dAdditionalTable + m_RawHeight
+            'Porto il punto nel riferimento del grezzo
+            Dim frRaw As New Frame3d
+            EgtGetGroupGlobFrame(m_CurrProjPage.m_nRawId, frRaw)
+            ptAcquired.LocToLoc(New Frame3d(m_ptTableMin), frRaw)
+            m_ptPrev.LocToLoc(New Frame3d(m_ptTableMin), frRaw)
+            If m_bptLast Then
+               If Point3d.SameApprox(ptAcquired, m_ptLast) Then
+                  AddBtn.IsChecked = False
+                  Exit Sub
+               End If
+               Dim NewLine As Integer = EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptAcquired)
+               EgtSetColor(NewLine, m_KerfCol)
+               m_CurveXDamagedAreaList.Add(NewLine)
+            Else
+               m_bptLast = True
+            End If
+            m_ptLast = ptAcquired
+            If m_CurveXDamagedAreaList.Count > 1 Then
+               OkBtn.IsEnabled = True
+               CloseBtn.IsEnabled = True
+            End If
+            AddBtn.IsChecked = False
+            EgtDraw()
       End Select
    End Sub
 
@@ -1099,6 +1311,28 @@ Public Class RawPartPageUC
       Return True
    End Function
 
+   Private Function AcquireSawPoint(ByRef ptAcquired As Point3d) As Boolean
+      Dim ptTipP1 As Point3d
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
+         Return False
+      End If
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+      ' Trasformo in posizione punta utensile in basso
+      If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTipP1) Then
+         Return False
+      End If
+      ' Porto il tip nell'origine tavola
+      ptAcquired = ptTipP1
+      ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+      Return True
+   End Function
+
    Private Sub RemoveBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoveBtn.Click
       Select Case m_ActiveRawMode
          Case RAWMODE.RECTANGLE
@@ -1126,6 +1360,26 @@ Public Class RawPartPageUC
             End If
             RemoveBtn.IsChecked = False
             EgtDraw()
+         Case RAWMODE.FROM_SAW
+            If m_CurveXKerfList.Count > 0 Then
+               If m_CurveXKerfList.Count = 1 Then
+                  ' Aggiorno ptLast con primo punto
+                  EgtStartPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXKerfList(m_CurveXKerfList.Count - 1))
+                  m_CurveXKerfList.RemoveAt(m_CurveXKerfList.Count - 1)
+               Else
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXKerfList(m_CurveXKerfList.Count - 1))
+                  m_CurveXKerfList.RemoveAt(m_CurveXKerfList.Count - 1)
+                  ' Aggiorno ptLast
+                  EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
+               End If
+            Else
+               m_bptLast = False
+            End If
+            RemoveBtn.IsChecked = False
+            EgtDraw()
          Case RAWMODE.DAMAGED
             ' Verifico ci sia almeno una zona rovinata
             If EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_DAMAGED) = GDB_ID.NULL Then
@@ -1136,6 +1390,46 @@ Public Class RawPartPageUC
             DeleteBtn.IsChecked = False
             m_nPtMode = If(RemoveBtn.IsChecked(), PTMODE.REMOVE, PTMODE.MOVE)
             m_nPtDmgMode = DMGMODE.NONE
+         Case RAWMODE.DAMAGED_BY_LASER
+            If m_CurveXDamagedAreaList.Count > 0 Then
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  ' Aggiorno ptLast con primo punto
+                  EgtStartPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1))
+                  m_CurveXDamagedAreaList.RemoveAt(m_CurveXDamagedAreaList.Count - 1)
+               Else
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1))
+                  m_CurveXDamagedAreaList.RemoveAt(m_CurveXDamagedAreaList.Count - 1)
+                  ' Aggiorno ptLast
+                  EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
+               End If
+            Else
+               m_bptLast = False
+            End If
+            RemoveBtn.IsChecked = False
+            EgtDraw()
+         Case RAWMODE.DAMAGED_BY_SAW
+            If m_CurveXDamagedAreaList.Count > 0 Then
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  ' Aggiorno ptLast con primo punto
+                  EgtStartPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1))
+                  m_CurveXDamagedAreaList.RemoveAt(m_CurveXDamagedAreaList.Count - 1)
+               Else
+                  ' Cancello ultima linea
+                  EgtErase(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1))
+                  m_CurveXDamagedAreaList.RemoveAt(m_CurveXDamagedAreaList.Count - 1)
+                  ' Aggiorno ptLast
+                  EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
+               End If
+            Else
+               m_bptLast = False
+            End If
+            RemoveBtn.IsChecked = False
+            EgtDraw()
       End Select
    End Sub
 
@@ -1976,6 +2270,26 @@ Public Class RawPartPageUC
       End If
    End Sub
 
+   Private Sub VerifySawDefinig()
+      If m_bIsRawDefiningBySaw Then
+         If m_CurveXKerfList.Count > 1 Then
+            CloseRawBySaw()
+         Else
+            ' Elimino tutti i segmenti disegnati
+            For Each nEntityId As Integer In m_CurveXKerfList
+               If EgtGetType(nEntityId) = GDB_TY.CRV_LINE Then
+                  EgtErase(nEntityId)
+               End If
+            Next
+            ' Azzero lista e punto di partenza
+            m_CurveXKerfList.Clear()
+            ' Creo rettangolo
+            UpdateRawPart()
+         End If
+         m_bIsRawDefiningBySaw = False
+      End If
+   End Sub
+
    Private Sub LoadFromMachine()
       ' Elimino grezzo già presente
       EgtErase(EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID))
@@ -1993,6 +2307,10 @@ Public Class RawPartPageUC
       Select Case m_ActiveRawMode
          Case RAWMODE.DAMAGED_BY_LASER
             CloseDamagedAreaByLaser()
+         Case RAWMODE.DAMAGED_BY_SAW
+            CloseDamagedAreaBySaw()
+         Case RAWMODE.FROM_SAW
+            CloseRawBySaw()
          Case Else
             CloseRawByLaser()
       End Select
@@ -2036,6 +2354,42 @@ Public Class RawPartPageUC
       CloseBtn.IsEnabled = False
    End Sub
 
+   Private Sub CloseRawBySaw()
+      ' Verifico ci siano punti
+      If m_CurveXKerfList.Count() = 0 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptStart))
+      ' Trasformo lista di curve in un array
+      Dim CurveXKerfArray As Integer() = m_CurveXKerfList.ToArray
+      ' Creo contorno kerf
+      Dim nKerfId As Integer = EgtCreateCurveCompoByChain(m_CurrProjPage.m_nRawId, m_CurveXKerfList.Count, CurveXKerfArray, ptStart, True)
+      EgtSetName(nKerfId, NAME_KERF)
+      EgtSetColor(nKerfId, m_KerfCol)
+      ' Pulisco lista entità del grezzo
+      m_CurveXKerfList.Clear()
+      ' Aggiorno il grezzo comprese dimensioni e posizione
+      UpdateRawPartKerf()
+      ' Salvo il valore del kerf (sempre in mm)
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      If dKerf < 0 Then
+         EgtSetInfo(m_CurrProjPage.m_nRawId, KEY_INVERT_KERF, -1)
+      Else
+         EgtSetInfo(m_CurrProjPage.m_nRawId, KEY_INVERT_KERF, 1)
+      End If
+      EgtSetInfo(m_CurrProjPage.m_nRawId, KEY_KERF, m_RawKerf)
+      ' Segno flag che indica fine della definizione
+      m_bIsRawDefiningBySaw = False
+      ' Elimino primo punto per prossimo grezzo
+      m_bptLast = False
+      ' Aggiorno visualizzazione
+      EgtDraw()
+      ' Disattivo il bottone chiudi grezzo
+      CloseBtn.IsEnabled = False
+   End Sub
+
 #Region "Damaged Area"
 
    Private Sub AddNewDamagedArea()
@@ -2092,6 +2446,32 @@ Public Class RawPartPageUC
       CloseBtn.IsEnabled = False
    End Sub
 
+   Private Sub CloseDamagedAreaBySaw()
+      ' Verifico ci siano punti
+      If m_CurveXDamagedAreaList.Count() = 0 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXDamagedAreaList(0), ptStart)
+      ' creao la linea che va dal primo punto all'ultimo
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptStart))
+      ' Trasformo lista di curve in un array
+      Dim CurveXDamagedAreaArray As Integer() = m_CurveXDamagedAreaList.ToArray
+      ' Creo contorno kerf
+      Dim nDmgId As Integer = EgtCreateCurveCompoByChain(m_CurrProjPage.m_nRawId, m_CurveXDamagedAreaList.Count, CurveXDamagedAreaArray, ptStart, True)
+      EgtSetName(nDmgId, NAME_DAMAGED)
+      EgtSetColor(nDmgId, m_KerfCol)
+      ' Pulisco lista entità del grezzo
+      m_CurveXDamagedAreaList.Clear()
+      ' Segno flag che indica fine della definizione
+      m_bIsRawDefiningBySaw = False
+      ' Elimino primo punto per prossimo grezzo
+      m_bptLast = False
+      ' Aggiorno visualizzazione
+      EgtDraw()
+      ' Disattivo il bottone chiudi grezzo
+      CloseBtn.IsEnabled = False
+   End Sub
+
    Private Sub RemoveDamagedArea()
       ' Elimino area rovinata selezionata
       EgtErase(m_nSelDmg)

Simulation/SimulationPageUC.xaml

@@ -240,6 +240,9 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
+         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateXPIUC_Click">
+                <Image Source="{DynamicResource GenerateCNImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
+         </Button>
          <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtnUC_Click">
             <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>

Simulation/SimulationPageUC.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.Runtime.InteropServices
 Imports EgtUILib
+Imports EgtWPFLib
 
 Public Class SimulationPageUC
    ' Riferimenti a pagine
@@ -76,6 +77,12 @@ Public Class SimulationPageUC
       End If
       ' Pulsante Play
       PlayPauseImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Play.png", UriKind.Relative))
+      ' abilito la visualizzazione del pulsante per la sola generazione del codice CN
+      If GetPrivateProfileInt(S_GENERAL, K_GENERATECN, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         GenerateCN_Btn.Visibility = Visibility.Visible
+      Else
+         GenerateCN_Btn.Visibility = Visibility.Hidden
+      End If
    End Sub
 
    Private Sub SimulationPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -559,6 +566,111 @@ Public Class SimulationPageUC
 
    End Sub
 
+   Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      Dim bOk As Boolean = True
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      ' Elimino eventuale attrezzaggio da OmagOFFICE
+      EgtEraseCurrSetup()
+      ' Verifico l'attrezzaggio degli utensili utilizzati
+      Dim sMissingTools As String = String.Empty
+      If Not VerifySetup(sMissingTools) Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90322) & " " & sMissingTools)  'Mancano gli utensili : ... 
+         Return
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Aggiorno flag per lavaggio
+      m_CurrProjPage.UpdateWashingFlag()
+      ' Aggiorno flag per tastatura per tagli con angolo di fianco
+      m_CurrProjPage.UpdateSideAngCutProbeFlag()
+      ' Se pezzi piani e non c'è ordine delle lavorazioni, ricalcolo tutto e ne faccio uno automatico
+      Dim nPrjType As Integer = m_CurrProjPage.GetCurrentProjectType()
+      Dim bDirectCut As Boolean = (GetDirectCutPart() <> GDB_ID.NULL)
+      If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+         Not bDirectCut And
+         Not m_CurrProjPage.GetOrderMachiningFlag() Then
+         ResetAllMachinings()
+         bOk = SortAllMachinings()
+         If bOk Then
+            m_CurrProjPage.SetOrderMachiningFlag()
+            Dim bModif As Boolean = TestAllMachiningsForStrict()
+            If bModif Then
+               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
+            Else
+               m_CurrProjPage.SetInfoMessage(EgtMsg(90399))        'Aggiornate tutte le lavorazioni
+            End If
+            EgtDraw()
+         End If
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Disabilito impostazione modificato
+      EgtDisableModified()
+      ' Aggiorno le lavorazioni
+      bOk = UpdateAllMachiningsToolpaths() And bOk
+      ' Aggiorno posizionamento ventose sui pezzi per eventuali tagli da sotto con lama
+      bOk = UpdateVacuumsForDrip() And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Inserisco indice di progetto
+      m_CurrProjPage.SetProjectIndexFlag()
+      ' Inserisco il materiale
+      m_CurrProjPage.SetProjectMaterial()
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\MachProj.nge"
+      m_CurrProjPage.SaveFile(sMchPath)
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Se modalità Ufficio, copio il progetto ed esco
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         ' Ripristino come fase corrente quella iniziale
+         EgtSetCurrPhase(1)
+         ' Chiedo il nome del file esportato
+         Dim MySaveNameWD As New SaveNameWD(m_MainWindow, SaveNameWD.SAVE_TYPE.PRJ_COPY)
+         MySaveNameWD.ShowDialog()
+         Return
+      End If
+      ' Se presente ripartenza, ne chiedo conferma
+      Dim nPhaseRestart As Integer = m_CurrProjPage.GetProjectNcRestart()
+      If nPhaseRestart <> 0 Then
+         ' Confermi ripartenza dalla fase NNN ?
+         Dim AskNcRestart As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90326), nPhaseRestart),
+                                        EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL, 2)
+         Select Case AskNcRestart.m_nPressedBtn
+            Case 1         ' YES
+            Case 2         ' NO
+               EgtEnableModified()
+               m_CurrProjPage.ResetProjectNcRestart()
+               nPhaseRestart = 0
+               EgtDisableModified()
+            Case Else      ' CANCEL
+               Return
+         End Select
+      End If
+      ' Se abilitate, eseguo le stime
+      If GetPrivateProfileInt(S_MACH_ESTIMATIONS, K_ENABLEEST, 0, m_MainWindow.GetMachIniFile()) <> 0 Then
+         EgtEstimate(m_MainWindow.GetTempDir() & "\MachProj.html", "OmagCut ver." & m_MainWindow.GetVersion())
+      End If
+      ' Genero file CNC (lancio anche se errore in precedenza) -> recupero la tavola corrente! CamAuto.GetCurrentTable()
+      Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
+      Dim sIndexTab As String = String.Empty
+      If nIndexTab > 0 Then
+         sIndexTab = nIndexTab.ToString
+      End If
+      Dim sFileName As String = "CadCut" & sIndexTab
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\" & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      bOk = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion()) And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Ripristino come fase corrente quella iniziale
+      EgtSetCurrPhase(1)
+      If bOk Then
+         m_CurrProjPage.SetInfoMessage("Genarato file " & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+      Else
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+      End If
+   End Sub
+
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer
       ' Visualizzo assi
       ShowCncData()

Utility/Utility.vb

@@ -60,6 +60,69 @@ Module Utility
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+", "1", "0", "0", "0"}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
+
    Friend Function UIExprToExpr(sUIExpr As String) As String
       If String.IsNullOrWhiteSpace(sUIExpr) Then
          Return ""

WorkInProgress/WorkInProgressPageUC.xaml.vb

@@ -201,6 +201,9 @@ Public Class WorkInProgressPageUC
       End If
       EgtSetCurrPhase(nCurrPhase, True)
       EgtDraw()
+      ' Tempo di ritardo nel ciclo
+      Dim nTimeStep As Integer = 50
+      nTimeStep = GetPrivateProfileInt(S_MACH_INPROGRESS, K_WP_STEPTIME, nTimeStep, m_MainWindow.GetMachIniFile())
       ' Ciclo
       While m_bContinue
          ' Rileggo la variabile di fase
@@ -233,7 +236,7 @@ Public Class WorkInProgressPageUC
             EgtDraw()
          End If
          ' Per evitare di ciclare rapidissimamente e consumare inutilmente CPU
-         System.Threading.Thread.Sleep(10)
+         System.Threading.Thread.Sleep(nTimeStep)
          ' Leggo la fase
          If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
             m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
@@ -306,7 +309,8 @@ Public Class WorkInProgressPageUC
       Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
       WorkInProgressScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
       ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-      If Not WorkInProgressScene.Init() Then
+      Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+      If Not WorkInProgressScene.Init() Or Not bProd Then
          ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
          Me.WorkInProgressPageGrid.Children.Remove(WorkInProgressSceneHost)
          ' Flag per riavvio programma
@@ -357,6 +361,7 @@ Public Class WorkInProgressPageUC
 #End If
          m_MainWindow.Close()
          If bRestart Then Process.Start( Application.ResourceAssembly.Location)
+         Return True
       End If
       ' dimensione lineare max in pixel delle textures
       Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())