Migliorata gestione deposito su tavola ausiliaria

- cambio di versione

CAM/CamAuto.vb

@@ -93,7 +93,7 @@ Friend Module CamAuto
       If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS Then
          ' Reinserisco tutte le lavorazioni piane
          AddMachinings(GDB_ID.NULL, nWarn)
-      ' Se altrimenti progetto con cornici
+         ' Se altrimenti progetto con cornici
       ElseIf nPrjType = CurrentProjectPageUC.PRJ_TYPE.FRAMES Then
          ' Reinserisco tutte le lavorazioni delle cornici
          AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
@@ -101,6 +101,82 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBRidges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL
@@ -674,6 +750,9 @@ Friend Module CamAuto
       End If
       ' Lo sposto dalla lavorazione al pezzo
       Dim nId As Integer = EgtGetFirstInGroup(nMchPvId)
+
+      If nId = GDB_ID.NULL Then Return False
+
       While nId <> GDB_ID.NULL
          EgtRelocateGlob(nId, nPartPvId)
          nId = EgtGetFirstInGroup(nMchPvId)
@@ -699,11 +778,32 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function IsExitPreCut(nOperId As Integer) As Boolean
+      ' Deve essere una lavorazione
+      If Not EgtSetCurrMachining(nOperId) Then Return False
+      ' Verifico presenza Info di PreCut
+      Return EgtExistsInfo(nOperId, INFO_MCH_EPC)
+   End Function
+
+   Friend Function RemoveAllExitPreCuts() As Boolean
+      Dim nOperId As Integer = EgtGetFirstOperation()
+      While nOperId <> GDB_ID.NULL
+         Dim nNextOperId As Integer = EgtGetNextOperation( nOperId)
+         If EgtGetType( nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
+            EgtRemoveOperation( nOperId)
+         End If
+         nOperId = nNextOperId
+      End While
+      Return True
+   End Function
+
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
+      Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+      Dim sWaterJetQual As String = m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
       Dim sPocketMch As String = m_MainWindow.m_CurrentMachine.sCurrPocketing
       Dim sDripSawMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripSawing, "")
       Dim sDripDrillMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripDrilling, "")
@@ -716,11 +816,13 @@ Friend Module CamAuto
       Dim bMillingOnCorners As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim bMillingOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
+      EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
+      EgtLuaSetGlobStringVar("CAM.WATERJETQLTY", sWaterJetQual)
       EgtLuaSetGlobStringVar("CAM.DRIPSAWMCH", sDripSawMch)
       EgtLuaSetGlobStringVar("CAM.DRIPDRILLMCH", sDripDrillMch)
       EgtLuaSetGlobNumVar("CAM.REDUCEDDEPTH", dReducedDepth)

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -19,8 +20,20 @@ Friend Module CSVFile
       Public m_dDimX As Double = 0
       Public m_dDimY As Double = 0
       Public m_dTh As Double = 0
+      Public m_dAng1 As Double = 0
+      Public m_dHeel1 As Double = 0
+      Public m_dAng2 As Double = 0
+      Public m_dHeel2 As Double = 0
+      Public m_dAng3 As Double = 0
+      Public m_dHeel3 As Double = 0
+      Public m_dAng4 As Double = 0
+      Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -51,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -62,7 +76,18 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -123,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -147,8 +174,26 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -176,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -188,20 +234,53 @@ Friend Module CSVFile
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,6 +28,10 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFaimily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFaimily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -424,10 +570,14 @@ Public Class CSVPage
          ' Definizione variabili
          Dim dDimX = CurrPart.m_dDimX
          Dim dDimY = CurrPart.m_dDimY
+         Dim dAng = New Double() {CurrPart.m_dAng1,CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4}
+         Dim dHeel = New Double() {CurrPart.m_dHeel1,CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4}
          If bMaxDimOnX And dDimY > dDimX Then
             Dim dTemp As Double = dDimX
             dDimX = dDimY
             dDimY = dTemp
+            dAng = New Double() {CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4,CurrPart.m_dAng1}
+            dHeel = New Double() {CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4,CurrPart.m_dHeel1}
          End If
          EgtLuaSetGlobNumVar("CMP.V1", dDimX)
          EgtLuaSetGlobNumVar("CMP.V2", dDimY)
@@ -439,7 +589,7 @@ Public Class CSVPage
          If nId = GDB_ID.NULL Then Continue For
          CurrPart.m_nId = nId
          ' Muovo la regione in Z per evitare problemi in visualizzazione
-         Dim nRegId = EgtGetFirstNameInGroup(nId, NAME_REGION)
+         Dim nRegId As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
          EgtMove(nRegId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
          ' Eventuale testo per indicare il sopra
          If Not bMaxDimOnX Then
@@ -447,11 +597,36 @@ Public Class CSVPage
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
             EgtSetColor(nText, New Color3d( 0, 0, 0))
          End If
+         ' Inserisco eventuali angoli di fianco
+         Dim bSideAngs As Boolean = False
+         Dim nOutLoopId As Integer = EgtGetFirstNameInGroup( nId, NAME_OUTLOOP)
+         For nSide As Integer = 1 To 4
+            Dim dSideAng As Double = dAng( nSide - 1)
+            Dim dSideHeel As Double = dHeel( nSide - 1)
+            If Math.Abs( dSideAng) > EPS_ANG_SMALL Then
+               Dim nEntId As Integer = EgtGetFirstNameInGroup( nOutLoopId, "A" & nSide.ToString())
+               If nEntId <> GDB_ID.NULL Then
+                  bSideAngs = True
+                  ' Assegno valori
+                  EgtSetInfo(nEntId, INFO_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_HEEL, dSideHeel)
+               End If
+            End If
+         Next
+         ' Creo layer per testi nesting
+         If bSideAngs Then
+            Dim TextLayId As Integer = EgtCreateGroup(nId)
+            EgtSetName(TextLayId, SIDE_ANGLE_LAYER)
+            EgtSetColor(TextLayId, New Color3d(0, 0, 128))
+            ' Opero su geometria esterna pezzo
+            SideAngle.WriteSideAngleOnLoop(nOutLoopId, TextLayId)
+         End If
          ' Aggiusto per lavorazioni
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -461,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -490,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -566,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -578,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -601,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml.vb

@@ -107,6 +107,9 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +143,9 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -165,6 +171,9 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +181,9 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,10 +205,13 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrProjPage.m_bSelectCurv = False
+      m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
       Select Case m_CadCutMode
          Case CadCutModes.Nest, CadCutModes.FastGrid
             ' Passo alla pagina Split
@@ -206,9 +221,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split

CadCuts/MoveRawPartPage.xaml

@@ -155,9 +155,11 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="10*"/>
          </Grid.ColumnDefinitions>
-
-
-      </Grid>
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
    </Grid>
 

CadCuts/MoveRawPartPage.xaml.vb

@@ -11,8 +11,12 @@ Public Class MoveRawPartPage
    Private m_nAuxTabId As Integer = GDB_ID.NULL
    ' Fase corrente
    Private m_nCurrPhase As Integer = 0
+   ' Disposizione corrente
+   Private m_nCurrDisposition As Integer = GDB_ID.NULL
    ' Premuto Prev
    Private m_bPrev As Boolean = False
+   ' Pemuto Next
+   Private m_bToNext As Boolean = False
    ' Dati movimento
    Private m_dStep As Double = 0
    Private m_dRotation As Double = 0
@@ -28,6 +32,8 @@ Public Class MoveRawPartPage
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
 
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
@@ -39,6 +45,8 @@ Public Class MoveRawPartPage
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_SplitPage = m_MainWindow.m_CadCutPageUC.m_SplitPage
       m_bActive = True
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Leggo tipo movimento grezzi
       m_bByHand = (GetVacuumType() = 0 Or
                    Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.AUTO_MANIP) Or
@@ -66,35 +74,17 @@ Public Class MoveRawPartPage
       m_nCurrPhase = EgtGetCurrPhase()
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
       If m_SplitPage.m_bOnAuxTab Then
-         m_nAuxTabId = EgtGetTableId(AUX_TAB)
-         ' Visualizzo tavolo ausiliario
-         Dim bOldEnMod As Boolean = EgtGetEnableModified()
-         If bOldEnMod Then EgtDisableModified()
-         EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
-         If bOldEnMod Then EgtEnableModified()
-         ' Se definizione movimenti
-         If Not m_SplitPage.m_bShow Then
-            ' Area tavolo ausiliario
-            Dim b3AuxTab As New BBox3d
-            EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
-            ' Area tavolo principale
-            Dim b3Tab As New BBox3d
-            EgtGetTableArea(1, b3Tab)
-            ' Imposto offset su tavolo principale per includere anche il secondario
-            Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
-            Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
-            Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
-            Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
-            EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
-         End If
-         EgtZoom(ZM.ALL)
-      ' altrimenti, aggiorno visualizzazione
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
+         SetAuxTabInCurrDisposition()
+         ' altrimenti, aggiorno visualizzazione
       Else
          EgtDraw()
       End If
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
-      StepMoveTxBx.Text = LenToString(m_dStep, 3)
+      ' Ricavo la lunghezza del baffo di taglio 
+      m_dStep = SplitAuto.MaxCuttingMustache(m_dStep)
+      StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+1"
       m_dRotation = GetPrivateProfileDouble(S_RAWMOVE, K_RAWROTATION, 30, m_MainWindow.GetIniFile())
       RotationAngleTxBx.Text = DoubleToString(m_dRotation, 3)
       ' Se movimento manuale perpendicolare
@@ -160,8 +150,9 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento con ventose
+         ' altrimenti per movimento con ventose
       ElseIf Not m_SplitPage.m_bOnAuxTab Then
          UpBtn.Visibility = Windows.Visibility.Visible
          LeftBtn.Visibility = Windows.Visibility.Visible
@@ -176,8 +167,9 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento finale dei pezzi
+         ' altrimenti per movimento finale dei pezzi
       Else
          UpBtn.Visibility = Windows.Visibility.Hidden
          LeftBtn.Visibility = Windows.Visibility.Hidden
@@ -192,14 +184,47 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Visible
          BottomLBtn.Visibility = Windows.Visibility.Visible
          BottomRBtn.Visibility = Windows.Visibility.Visible
+         PauseBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
       End If
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
       ' Abilitazione bottone modifica
       ModifyBtn.IsEnabled = m_SplitPage.m_bShow
       ' gestione abilitazione altri bottoni
       EnableButtons()
    End Sub
 
+   Private Sub SetAuxTabInCurrDisposition()
+      ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
+      m_nAuxTabId = EgtGetTableId(AUX_TAB)
+      ' Visualizzo tavolo ausiliario
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
+      If bOldEnMod Then EgtEnableModified()
+      ' Se definizione movimenti
+      If Not m_SplitPage.m_bShow Then
+         ' Area tavolo ausiliario
+         Dim b3AuxTab As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+         ' Area tavolo principale
+         Dim b3Tab As New BBox3d
+         EgtGetTableArea(1, b3Tab)
+         ' Imposto offset su tavolo principale per includere anche il secondario
+         Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
+         Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
+         Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
+         Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
+         EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
+      End If
+      EgtZoom(ZM.ALL)
+
+      ' verifico che siano state salvate correttamente le info della tavola di scarico
+      EgtSaveFile("c:\EgtData\OmagCUT\Temp\AuxTab.nge", NGE.BIN)
+
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -228,16 +253,48 @@ Public Class MoveRawPartPage
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nId, nStat)
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                     ' mantengo la selezione del pezzo
+                     EgtSetStatus(nId, GDB_ST.SEL)
+                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  Else
+                     ' Se con ventose, le nascondo
+                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
+               ' Deseleziono tutto e abilito la selezione del pezzo corrente
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
                If Not m_bByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, m_MainWindow.GetMachIniFile())
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -247,10 +304,18 @@ Public Class MoveRawPartPage
                      ' Reset eventuale messaggio
                      m_CurrProjPage.ClearMessage()
                   Else
+                     ' nascondo la visualizzazione delle ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento
-                     m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     If VacuumCups.bOverWeight Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4)) 'Pezzo troppo pesante : non si può muovere
+                     ElseIf VacuumCups.bExtraStroke Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5)) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     End If
                   End If
                End If
             End If
@@ -259,8 +324,54 @@ Public Class MoveRawPartPage
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+      End If
+
    End Sub
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
+#Region "Move Up/Down/Left/Right"
+
    Private Sub UpBtn_Click(sender As Object, e As RoutedEventArgs) Handles UpBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -283,9 +394,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -320,9 +437,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -340,9 +463,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -359,9 +488,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(-m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -371,6 +506,77 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region   'Move Up/Down/Left/Right
+
+   ' verifica che la poszione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+
+#Region "Rotate CounterClockWise/ClockWise"
+
    Private Sub RotateCounterClockwiseBtn_Click(sender As Object, e As RoutedEventArgs) Handles RotateCounterClockwiseBtn.Click
       ' Solo movimento con ventose
       If m_bByHand Then Return
@@ -378,14 +584,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -402,14 +618,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = -m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -419,6 +645,44 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region  ' Rotate CounterClockWise/ClockWise
+
+   ' verifica che la rotazione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -522,6 +786,16 @@ Public Class MoveRawPartPage
             Next
             If Not bOkRotate Then Return
          Else
+            ' sposto il pezzo in centro tavola → perchè tutti i movimenti sono fatti ruotando il pezzo in centro tavola!
+            Dim b3Area As New BBox3d
+            EgtGetTableArea(1, b3Area)
+            Dim b3RawTemp As New BBox3d
+            EgtGetRawPartBBox(nRawId, b3RawTemp)
+            ' ricavo il riferimento dell'angolo in basso a sinstra del grezzo rispetto alla tavola
+            Dim ptCorner As Point3d = New Point3d(b3Area.DimX / 2, b3Area.DimY / 2, 0) - New Vector3d(b3RawTemp.DimX / 2, b3RawTemp.DimY / 2, 0)
+            ' sposto il pezzo in questa posizione
+            EgtMoveToCornerRawPart(nRawId, ptCorner, MCH_CR.BL)
+            ' riprovo il movimento
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw) Then
                If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
                   ' riposiziono il pezzo come era prima
@@ -636,6 +910,62 @@ Public Class MoveRawPartPage
       Return True
    End Function
 
+   Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
+      If m_RawMoveDataList.Count = 0 Then Return
+      ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
+      Dim Index As Integer = 0
+      For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
+         If Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.x) < EPS_SMALL AndAlso Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.y) < EPS_SMALL Then
+            m_RawMoveDataList.RemoveAt(Index)
+         End If
+      Next
+      ' verifico che la lista non sia vuota
+      If m_RawMoveDataList.Count = 0 Then Return
+
+      ' recupero disposizione fase corrente
+      Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
+      SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
+      ' imposto eventuale movimento pezzi su tavola ausiliaria
+      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      '' Eseguo calcolo speciale dei movimenti: per tavola multicut
+      'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+
+      ' Creo nuova fase
+      Dim nNewPhase As Integer = EgtAddPhase()
+
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+      Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
+      SetPause(nCurrDisposition)
+      m_nCurrDisposition = nCurrDisposition
+      ' EgtSetStatus(nRawIdSlected, GDB_ST.OFF)
+      EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+      EgtSetCurrPhase(nNewPhase)
+      SetAuxTabInCurrDisposition()
+      ' ripulisco la lista degli spostamenti
+      m_RawMoveDataList.Clear()
+      ' aggiorno la fase corrente
+      m_nCurrPhase = EgtGetCurrPhase()
+   End Sub
+
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
       ' Recupero il primo grezzo selezionato
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
@@ -656,17 +986,75 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Torno alla fase precedente
       m_bPrev = True
-      ' Passo alla pagina delle spezzature
+      ' Passo alla pagina delle spezzature solo se non esiste prima una fased di deposito sulla tavola di scarico
+
+      Dim nPrevDispId As Integer = EgtGetPrevOperation(m_nCurrDisposition)
+      ' verifico se la fasa precedente è di tipo scarico
+      If IsDispUnloadOnAuxTab(nPrevDispId) Then
+         EgtSetCurrPhase(m_nCurrPhase - 1)
+         m_nCurrDisposition = nPrevDispId
+         m_nCurrPhase -= 1
+         m_bPrev = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         Return
+      End If
+
+      'If EgtGetOperationType(EgtGetPrevOperation(m_nCurrDisposition)) = MCH_OY.DISP AndAlso m_SplitPage.m_bOnAuxTab Then
+      '   EgtSetCurrPhase(m_nCurrPhase - 1)
+      '   m_nCurrDisposition = EgtGetPrevOperation(m_nCurrDisposition)
+      '   m_nCurrPhase -= 1
+      '   m_bPrev = False
+      '   m_SplitPage.m_bShow = True
+      '   EgtDraw()
+      '   Return
+      'End If
+
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_SplitPage)
       m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.Split
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+
+      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+      If IsDispUnloadOnAuxTab(m_nCurrDisposition) Then
+         EgtSetCurrPhase(m_nCurrPhase + 1)
+         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         m_nCurrPhase += 1
+         m_bToNext = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         EnableButtons()
+         Return
+      End If
+
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Passo alla pagina delle spezzature
@@ -710,6 +1098,26 @@ Public Class MoveRawPartPage
       EnableButtons()
    End Sub
 
+   ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
+   Public Function IsDispUnloadOnAuxTab(nCurrDispId As Integer)
+      ' verifico se la fase precedente è uno scarico su tavola ausiliaria
+      Dim bVal As Integer = 0
+      EgtGetInfo(nCurrDispId, "Pat", bVal)
+      Return bVal
+   End Function
+
+   ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
+   Public Function GetNextDisposition(nCurrDisposId As Integer)
+      Dim nDispId As Integer = nCurrDisposId
+      While nDispId <> GDB_ID.NULL
+         If EgtGetOperationType(nDispId) = MCH_OY.DISP Then
+            Return nDispId
+         End If
+         nDispId = EgtGetNextOperation(nDispId)
+      End While
+      Return GDB_ID.NULL
+   End Function
+
    Private Sub EnableButtons()
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -724,11 +1132,22 @@ Public Class MoveRawPartPage
       TopRBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomLBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
+      PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
-      NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      If m_SplitPage.m_bShow Then
+         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+      Else
+         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      End If
    End Sub
 
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
+      ' verifico che la fase corrente non sia vuota
+      Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+         EgtErase(nLastDispId)
+      End If
+
       ' Se movimento con ventose
       If Not m_bByHand Then
          ' nascondo le ventose
@@ -744,11 +1163,11 @@ Public Class MoveRawPartPage
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
             ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable( nDispId, m_SplitPage.m_bOnAuxTab)
+            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
-      ' se altrimenti movimento senza ventose perchè lama troppo grande
+         ' se altrimenti movimento senza ventose perchè lama troppo grande
       ElseIf GetVacuumType() > 0 Then
          ' se non solo visualizzazione
          If Not m_SplitPage.m_bShow Then

CadCuts/NestPageUC.xaml

@@ -99,18 +99,38 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-         </UniformGrid>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-            Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
 
-         <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
          </UniformGrid>
 
       </Grid>

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,72 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.3*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+
+            </Grid.RowDefinitions>
+
+            <!--Messaggio: Seleziona il numero di pezzi-->
+            <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+                <TextBlock Name="NbrOfPartsMsg"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            </UniformGrid>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+
+                </Grid.ColumnDefinitions>
+
+                <!--ultimo progetto-->
+                <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--nuovo progetto-->
+                <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Select all" Visibility="Collapsed">
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--apri folder progetti-->
+                <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Cancel">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = "Selection parts"
+      NbrOfPartsMsg.Text = "Number of parts"
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SplitAuto.vb

@@ -5,6 +5,11 @@ Public Module SplitAuto
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private m_dLastDT As Double = 0
+   Public ReadOnly Property dLastDT As Double
+      Get
+         Return m_dLastDT
+      End Get
+   End Property
 
    '-----------------------------------------------------------------------------------------------
    Friend Class SplitMach
@@ -161,6 +166,17 @@ Public Module SplitAuto
    End Function
 
    '-----------------------------------------------------------------------------------------------
+   ' calcolo il numero di tipi di lavorazioni
+   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
+      If MachSplit.m_nType = MCH_OY.SAWING Then
+         nCountSawing += 1
+      ElseIf MachSplit.m_nType = MCH_OY.WATERJETTING Then
+         nCountWaterjetting += 1
+      Else
+         nCountOtherMachining += 1
+      End If
+   End Sub
+
    Friend Sub ColorMachining(MachSplit As SplitMach, Optional bReset As Boolean = False)
       EgtDisableModified()
       ' Assegno stato
@@ -737,35 +753,55 @@ Public Module SplitAuto
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
+      ' Spostamento originale
+      Dim vtOriMove As New Vector3d( vtMove)
+      ' Livello di movimento
+      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
-      If Not EgtMoveRawPart(nRawId, vtMove) Then Return False
+      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
       ' Se interferisce con altri grezzi, annullo movimento ed esco con errore
       If Not VerifyRawWithOtherRaws(nRawId, dMindist) Then
-         EgtMoveRawPart(nRawId, -vtMove)
+         EgtMoveRawPart(nRawId, -vtOriMove)
          Return False
       End If
+      If nMoveLevel < 2 Then Return True
       ' Provo ad aggiungere un altro movimento
-      If EgtMoveRawPart(nRawId, vtMove) Then
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += vtMove
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -vtMove)
+            EgtMoveRawPart(nRawId, -vtOriMove)
+         End If
+      End If
+      ' Provo ad aggiungere un altro movimento
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
+         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
+         Else
+            EgtMoveRawPart(nRawId, -vtOriMove)
          End If
       End If
       ' Provo ad aggiungere un movimento dimezzato
-      If EgtMoveRawPart(nRawId, 0.5 * vtMove) Then
+      If EgtMoveRawPart(nRawId, 0.5 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.5 * vtMove
+            vtMove += 0.5 * vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then return True
          Else
-            EgtMoveRawPart(nRawId, -0.5 * vtMove)
+            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If
       End If
-      ' Provo ad aggiunger un movimento 1/4
-      If EgtMoveRawPart(nRawId, 0.25 * vtMove) Then
+      ' Provo ad aggiungere un movimento 1/4
+      If EgtMoveRawPart(nRawId, 0.25 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.25 * vtMove
+            vtMove += 0.25 * vtOriMove
          Else
-            EgtMoveRawPart(nRawId, -0.25 * vtMove)
+            EgtMoveRawPart(nRawId, -0.25 * vtOriMove)
          End If
       End If
       Return True
@@ -817,4 +853,30 @@ Public Module SplitAuto
       Return (Not bInterf)
    End Function
 
+   Public Function MaxCuttingMustache(dMustache As Double) As Double
+      Dim MachSplitList As New List(Of SplitMach)
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se non è stata creata nessuna lista allora restituisco il valore di Default
+      If Not CalculateSplitMachList(nCurrPhase, MachSplitList) Then Return dMustache
+      Dim NewMustache As Double = 0
+      Dim ItemMachSplit As SplitMach
+      For Each ItemMachSplit In MachSplitList
+         ' Recupero lunghezza baffo secondo taglio
+         Dim nPvId As Integer = GDB_ID.NULL
+         EgtGetInfo(EgtGetFirstNameInGroup(ItemMachSplit.m_nId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+         Dim dDT As Double
+         If EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT) Then
+            If NewMustache < dDT Then NewMustache = dDT
+         End If
+      Next
+      Dim dExtraL As Double = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTRALONCUTREG, dExtraL)
+      ' se esiste il valore di un baffo allora sovrascrivo il valore di default
+      If NewMustache > 0 Then
+         dMustache = Math.Ceiling(NewMustache)
+      End If
+      Return dMustache + dExtraL
+   End Function
+
 End Module

CadCuts/SplitPageUC.xaml

@@ -48,8 +48,8 @@
             </Button>
             <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
             <Button Name="AutoBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="RestartBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" Visibility="Hidden"/>
-         </Grid>
+                <Button Name="RestartBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" Visibility="Hidden"/>
+            </Grid>
       </Grid>
 
       <!--Left Button Grid-->
@@ -100,9 +100,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
@@ -113,11 +119,28 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+                <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+                <!-- solo per macchine con lavorazioni Waterjet -->
+                <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+
+                <!-- solo per macchine con lavorazioni Waterjet -->
+                <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+
+                <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+
+            </Grid>
 
       </Grid>
 
@@ -139,18 +162,42 @@
          </Grid.ColumnDefinitions>
 
 
-         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifEndBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+            <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
       </Grid>
 

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -8,7 +9,24 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -48,6 +66,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -64,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -74,6 +108,11 @@ Module VacuumCups
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -160,6 +199,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -182,6 +233,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -261,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -289,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -363,6 +417,26 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +448,30 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
+         Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+            ' se l'orientamento è verticale
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -430,13 +523,55 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
+      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -457,6 +592,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -67,6 +67,8 @@ Module ConstGen
    Public Const MACHININGS_DIR As String = "Machinings"
    ' Nome file Dati delle lucidature
    Public Const KITS_FILE As String = "Kits.data"
+   ' Nome file Dati per waterJet
+   Public Const WATERJETDB_FILE As String = "WaterjetDB.data"
 
    ' File dei pezzi rovinati
    Public Const CURR_RUINED_EPL As String = "RuinedParts.epl"
@@ -90,6 +92,10 @@ Module ConstGen
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -143,6 +149,9 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -178,6 +187,8 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -203,6 +214,8 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -244,6 +257,8 @@ Module ConstGen
    Public Const INFO_MCH_USER_SAL As String = "Usal"
    ' Info allungamento finale lavorazione imposto dall'utente
    Public Const INFO_MCH_USER_EAL As String = "Ueal"
+   ' Info lavorazione di tipo pretaglio sull'uscita
+   Public Const INFO_MCH_EPC As String = "EPC"
    ' Nome contorno taglio
    Public Const NAME_PV_CUT As String = "CUT"
    ' Nome contorno pre-taglio
@@ -290,6 +305,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"
@@ -332,6 +353,8 @@ Module ConstGen
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 
@@ -341,6 +364,9 @@ Module ConstGen
    ' Lunghezza libera infinita
    Public Const FREELEN_INF = 9999
 
+   ' Costante per lunghezza gambo di lama
+   Public Const STEM = 131072
+
    ' Colori per lavorazioni
    Public Function COL_MCH_CUT() As Color3d
       Return New Color3d(0, 255, 0)

Constants/ConstIni.vb

@@ -45,6 +45,11 @@ Module ConstIni
    Public Const K_VIRTUALKEYBOARD As String = "VirtualKeyboard"
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
+   Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -79,6 +84,13 @@ Module ConstIni
    Public Const K_ZOOMWIN As String = "ZoomWin"
    Public Const K_DISTLINE As String = "DistLine"
 
+   Public Const S_ALZFRONT As String = "Alz&Front"
+   Public Const K_ALZFRONT As String = "Alz&Front"
+   Public Const K_ALZ_HEIGHT As String = "A_Height"
+   Public Const K_ALZ_DELTA_ANG As String = "A_DeltaAng"
+   Public Const K_FRONT_HEIGHT As String = "F_Height"
+   Public Const K_FRONT_DELTA_ANG As String = "F_DeltaAng"
+
    Public Const S_GRID As String = "Grid"
    Public Const K_SHOWGRID As String = "ShowGrid"
    Public Const K_SHOWFRAME As String = "ShowFrame"
@@ -97,6 +109,15 @@ Module ConstIni
    Public Const K_TRFDATA As String = "TrfData"
    Public Const K_CSVDATA As String = "CsvData"
    Public Const K_COMPODIR As String = "CompoDir"
+   Public Const K_CMP_COUNT As String = "Count"
+   Public Const K_LASTCOLOR As String = "LastColor"
+   Public Const K_COLOR As String = "Color"
+
+   Public Const S_EXTCOMPO As String = "Compo"
+
+   Public Const S_INTCOMPO As String = "InternalCompo"
+   Public Const K_INT_COMPODIR As String = "CompoDir"
+   Public Const K_INT_COUNT As String = "Count"
 
    Public Const S_FLATPARTS As String = "FlatParts"
    Public Const K_FLPCURRDIR As String = "CurrDir"
@@ -112,6 +133,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
@@ -120,6 +142,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"
@@ -131,6 +154,10 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+
+   Public Const S_SPLIT As String = "Split"
+   Public Const K_MOVE_LEV As String = "MoveLevel"
 
    Public Const S_CSV As String = "Csv"
    Public Const K_FULL As String = "Full"

Constants/ConstKitData.vb

@@ -11,9 +11,18 @@
    Public Const K_ZIGZAGX As String = "ZigZagX"
    Public Const K_OFFZIGZAGX As String = "OffZigZagX"
    Public Const K_STEPX As String = "StepX"
+   Public Const K_RADIUSX As String = "RadiusX"
+   Public Const K_DISTANCEX As String = "DistanceX"
    Public Const K_ZIGZAGY As String = "ZigZagY"
    Public Const K_OFFZIGZAGY As String = "OffZigZagY"
    Public Const K_STEPY As String = "StepY"
+   Public Const K_RADIUSY As String = "RadiusY"
+   Public Const K_DISTANCEY As String = "DistanceY"
+   Public Const K_SPIRAL As String = "Spiral"
+   Public Const K_OFFSPIRAL As String = "OffSpiral"
+   Public Const K_STEPSPIRAL As String = "StepSpiral"
+   Public Const K_RADIUSSPIRAL As String = "RadiusSpiral"
+   Public Const K_DISTANCESPIRAL As String = "DistanceSpiral"
    Public Const K_LILEN As String = "LiLen"
    Public Const K_LIHEIGHT As String = "LiHeight"
    Public Const K_LILOAD As String = "LiLoad"

Constants/ConstMachIni.vb

@@ -37,14 +37,19 @@
    Public Const K_PATH_HMI As String = "PathHmi"
    Public Const K_USENEWMDI As String = "UseNewMDI"
    Public Const K_ISSIEMENSONE As String = "IsSiemensOne"
+   Public Const K_ISACTIVEMODESUBSCR As String = "IsActiveModeSubscr"
    Public Const K_DBVARPATH As String = "DBVarPath"
+   Public Const K_NEWWRITECNCMODE As String = "NewWriteCNCMode"
 
    Public Const S_NCNUM As String = "NcNUM"
    Public Const K_RESETSENDDELAY As String = "ResetSendDelay"
+   Public Const K_THREADSLEEP As String = "ThreadSleep"
+   Public Const K_PHOTODELEY As String = "PhotoDeley"
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
+   Public Const K_WRITECNCMODEVAR As String = "WriteCNCModeVar"
    Public Const K_COMM As String = "Comm"
    Public Const K_REFRESH As String = "Refresh"
    Public Const K_MODE As String = "Mode"
@@ -72,6 +77,9 @@
    Public Const K_DOORCLOSED As String = "DoorClosed"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
+   Public Const K_PARKING As String = "Parking"
+   Public Const K_ENABLEZONE As String = "EnableZone"
+   Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
@@ -99,13 +107,16 @@
    Public Const K_VACUUMOFF As String = "VacuumOff"
    Public Const K_BYPASSTATE As String = "BypassState"
    Public Const K_FEEDHOLD As String = "FeedHold"
+   Public Const K_SPOTLIGHT1 As String = "SpotLight1"
+   Public Const K_SPOTLIGHT2 As String = "SpotLight2"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
-   Public Const K_ZJOG As String = "ZJog"
-   Public Const K_BCJOG As String = "BCJog"
+   Public Const K_ZCJOG As String = "ZCJog"
+   Public Const K_ZBJOG As String = "ZBJog"
    Public Const K_POWERON As String = "PowerON"
    Public Const K_POWEROFF As String = "PowerOFF"
+   Public Const K_REMOTE As String = "Remote"
 
    Public Const S_PRODUCTIONLINE As String = "ProductionLine"
    Public Const K_ACTIVE As String = "Active"
@@ -137,6 +148,7 @@
    Public Const K_TAB2_ADDITIONALTABLE As String = "Tab2AdditionalTable"
    Public Const K_TAB3_ADDITIONALTABLE As String = "Tab3AdditionalTable"
    Public Const K_CENTER_RAW_ONX As String = "CenterRawOnX"
+   Public Const K_CHANGETABWD As String = "ChangeTabWD"
 
    Public Const S_PHOTO As String = "Photo"
    Public Const K_PHOTO_OFFSETX As String = "OffsetX"
@@ -203,6 +215,7 @@
    Public Const K_MACH_CUTFSEVENABLE As String = "CutFsevEnable"
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
+   Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
@@ -215,6 +228,10 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -238,6 +255,7 @@
 
    Public Const S_MACH_INPROGRESS As String = "InProgress"
    Public Const K_PHASEVAR As String = "PhaseVar"
+   Public Const K_WP_STEPTIME As String = "WPStepTime"
 
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
@@ -270,9 +288,12 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQualilty"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -330,6 +330,49 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_PARKING Then
+            ParkingButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(ParkingState)
+      End If
+   End Sub
+
+   Friend Sub ZoneStateChanged(ZoneState As Integer)
+      'Dim sFlag As String = String.Empty
+      'If ZoneState = 1 Then
+      '   sFlag = BTN_ENABLE_ZONE_1
+      'ElseIf ZoneState = 2 Then
+      '   sFlag = BTN_ENABLE_ZONE_2
+      'End If
+      'Dim EnableZoneButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEZONE Then
+      '      EnableZoneButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnableZoneButton) Then
+      '   EnableZoneButton.SetIsChecked(EnableZone)
+      'End If
+   End Sub
+
+   Friend Sub PcStateChanged(EnablePC As Boolean)
+      'Dim EnablePCButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEPC Then
+      '      EnablePCButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnablePCButton) Then
+      '   EnablePCButton.SetIsChecked(EnablePC)
+      'End If
+   End Sub
+
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,
@@ -402,6 +445,8 @@ Public MustInherit Class MachineButton
    Friend Const BTN_STATE_THREEAXIS As String = "ThreeAxis"
    Friend Const BTN_STATE_FIVEAXIS As String = "FiveAxis"
    Friend Const BTN_STATE_NOTHING As String = "Nothing"
+   Friend Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Friend Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
 
    ' Dichiarazione delle Page UserControl
    Friend Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -475,7 +520,7 @@ Public MustInherit Class MachineButton
                If m_CN.m_NewVariable And m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
                   ' solo per Flexium
                   m_CN.DPlcVariables_WriteVariables(ENumber, EValue)
-                  If Not IsNothing(ENumber2) And Not IsNothing(EValue2) Then
+                  If Not String.IsNullOrEmpty(ENumber2) And Not String.IsNullOrEmpty(EValue2) Then
                      m_CN.DPlcVariables_WriteVariables(ENumber2, EValue2)
                   End If
                   ' altrimenti scrittura delle variabili E
@@ -647,6 +692,7 @@ Public Class TwoStateButton
          Return m_IsChecked
       End Get
       Set(value As Boolean)
+         ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
          If value Then
             ExecuteMDICommand(TLuaScriptName)

DirectCuts/CopyTemplateUC.xaml

@@ -35,10 +35,11 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="Point1Btn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -55,10 +56,12 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="LineBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ArcBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="LineBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource LineaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ArcBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ArcoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
 
          </Grid>
 
@@ -69,14 +72,18 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+                <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource Rimuovi-segmentoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource ChiudiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
-            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10"  Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource Salva-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
             <Button Name="ExitBtn" Grid.Column="2" Grid.Row="10" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>

DirectCuts/CopyTemplateUC.xaml.vb

@@ -49,12 +49,12 @@ Public Class CopyTemplateUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      LineBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
-      ArcBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
-      RemoveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
-      CloseBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
-      SaveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      LineBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
+      ArcBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
+      RemoveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
+      CloseBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
+      SaveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
    End Sub
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded

DirectCuts/DirectCutPageUC.xaml

@@ -28,7 +28,7 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
             <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
@@ -60,24 +60,127 @@
                <RowDefinition Height="1*"/>
                <RowDefinition Height="1*"/>
                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
-            <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="SingleCutBtn" Grid.Row="1"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="MultipleCutBtn" Grid.Row="2"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="GridCutBtn" Grid.Row="3"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="FlatteningCutBtn" Grid.Row="4"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="PolishingBtn" Grid.Row="5"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="CopyTemplateBtn" Grid.Row="6"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="SawTestBtn" Grid.Row="7"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
+               <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+                <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="ManualTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SingleCutBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="MultipleCutBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="GridCutBtn" Grid.Row="3"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="GridCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+
+                <Button Name="SingleDrillBtn" Grid.Row="4"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="FlatteningCutBtn" Grid.Row="5"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+             
+                <Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="CopyTemplateBtn" Grid.Row="7"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>
+             
+            <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+            </Button>
+
+        </Grid>
       
       </Grid>
       
@@ -97,8 +200,9 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
             <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="5*"/>
+            <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
 
@@ -115,24 +219,31 @@
           <!--Comando asse X-Y-->
           <ToggleButton Name="XYBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-            <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+                <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
           
-          <!--Comando asse Z-->
-          <ToggleButton Name="ZBtn" Grid.Column="3"   
+          <!--Comando asse Z-C-->
+          <ToggleButton Name="ZCBtn" Grid.Column="3"   
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+              <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
           </ToggleButton>
 
-          <!--Comando asse B-C-->
-          <ToggleButton Name="BCBtn" Grid.Column="4"
+         <!--Comando asse Z-B-->
+         <ToggleButton Name="ZBBtn" Grid.Column="4"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
+                <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
 
-            <Button Name="ManualModeBtn" Grid.Column="7"
-               Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         <!--Comando Remote-->
+         <ToggleButton Name="RemoteBtn" Grid.Column="5"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+         </ToggleButton>
+
+         <!--Comando Manula/MDI-->
+         <Button Name="ManualModeBtn" Grid.Column="7"
+                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -8,6 +8,7 @@ Public Class DirectCutPageUC
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
    Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
    ' nuova finestra per i comandi per il taglio manuale nuovo
    Friend m_SingleCutAuto As SingleCutAuto
    Friend m_MultipleCut As MultipleCut
@@ -18,6 +19,7 @@ Public Class DirectCutPageUC
    Friend m_SawTest As SawTestUC
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
    Friend m_nMachLook As Integer = MCH_LOOK.ALL
@@ -50,6 +52,7 @@ Public Class DirectCutPageUC
       CopyTemplate
       SawTest
       SingleCutAuto
+      SingleDrill
    End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
@@ -60,6 +63,7 @@ Public Class DirectCutPageUC
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
       m_SingleCut = New SingleCutUC
+      m_SingleDrill = New SingleDrillUC
       m_MultipleCut = New MultipleCut
       m_GridCut = New GridCut
       m_FlatteningCut = New FlatteningCut
@@ -73,13 +77,14 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 6)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
       If m_bManulaCut Then
          m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
       Else
          m_SingleCut.SetValue(Grid.RowProperty, 1)
       End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
       m_MultipleCut.SetValue(Grid.RowProperty, 1)
       m_GridCut.SetValue(Grid.RowProperty, 1)
       m_FlatteningCut.SetValue(Grid.RowProperty, 1)
@@ -89,15 +94,14 @@ Public Class DirectCutPageUC
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
-      Dim bCollpsedNewBottonsConsole As Boolean = False
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
+      Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
-         ' per le configurazioni diverse dalla Digitale5
-         bCollpsedNewBottonsConsole = True
       End If
 
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
@@ -105,30 +109,34 @@ Public Class DirectCutPageUC
          ManualModeBtn.Visibility = Windows.Visibility.Hidden
       End If
 
-      ManualBtn.Content = EgtMsg(90201)
-      SingleCutBtn.Content = EgtMsg(90202)
-      MultipleCutBtn.Content = EgtMsg(90203)
-      GridCutBtn.Content = EgtMsg(90204)
-      FlatteningCutBtn.Content = EgtMsg(90206)
-      PolishingBtn.Content = EgtMsg(90231)
-      CopyTemplateBtn.Content = EgtMsg(90209)
-      SawTestBtn.Content = EgtMsg(90207)
+      ' ManualBtn.Content = EgtMsg(90201)
+      ManualTxt.Text = EgtMsg(90201)
+      'SingleCutBtn.Content = EgtMsg(90202)
+      SingleCutTxt.Text = EgtMsg(90202)
+      'SingleDrillBtn.Content = "Foro singolo"
+      SingleDrillTxt.Text = EgtMsg(90258)
+      'MultipleCutBtn.Content = EgtMsg(90203)
+      MultipleCutTxt.Text = EgtMsg(90203)
+      'GridCutBtn.Content = EgtMsg(90204)
+      GridCutTxt.Text = EgtMsg(90204)
+      'FlatteningCutBtn.Content = EgtMsg(90206)
+      FlatteningCutTxt.Text = EgtMsg(90206)
+      'PolishingBtn.Content = EgtMsg(90231)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SawTestBtn.Content = EgtMsg(90207)
+      SawTestTxt.text = EgtMsg(90207)
 
-      ' nuovi bottoni 20/05/2021
-      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollpsedNewBottonsConsole Then
-         XYBtn.Content = "X - Y"
-         ZBtn.Content = "Z"
-         BCBtn.Content = "B - C"
-      Else
-         XYBtn.Visibility = Windows.Visibility.Collapsed
-         ZBtn.Visibility = Windows.Visibility.Collapsed
-         BCBtn.Visibility = Windows.Visibility.Collapsed
-      End If
+
+      ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
+      ' leggo il numero di assi attivi nella macchina
+      Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
 
    End Sub
 
    Private Sub DirectCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
-      '------ NUOVI BOTTONI ----------
+      '------ INIZIO NUOVI BOTTONI ----------
       ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
       m_ButtonJogList.Clear()
       Dim m_nCount As Integer = 1
@@ -163,9 +171,11 @@ Public Class DirectCutPageUC
             End If
          End If
       End While
+      ' attivo la visualizzazione dei comandi
+      SetVisibilityJogButtuns()
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
+      '----------- FINE NUOVI BOTTONI------------
 
-      '-----------NUOVI BOTTONI------------
       ' Se rientro da simulazione
       If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
          LeftButtonGrid.Children.Add(m_SingleCut)
@@ -188,6 +198,9 @@ Public Class DirectCutPageUC
       ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
          LeftButtonGrid.Children.Add(m_SawTest)
          Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
       End If
 
       ' Caso standard
@@ -196,8 +209,12 @@ Public Class DirectCutPageUC
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
 
-      ' Attivo le lavorazioni solo se esiste il grezzo
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
       If m_bManulaCut Then
          ' anche se non è presente un grezzo mantengo abilitato il bottone
          SingleCutBtn.IsEnabled = True
@@ -206,9 +223,14 @@ Public Class DirectCutPageUC
       End If
       MultipleCutBtn.IsEnabled = bRawOk
       GridCutBtn.IsEnabled = bRawOk
-      FlatteningCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
       PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = bRawOk
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
 
       ' Nascondo i pezzi in parcheggio
       HideParkedParts()
@@ -216,6 +238,49 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+   Private Sub SetVisibilityJogButtuns()
+      XYBtn.Visibility = Visibility.Collapsed
+      ZCBtn.Visibility = Visibility.Collapsed
+      ZBBtn.Visibility = Visibility.Collapsed
+      RemoteBtn.Visibility = Visibility.Collapsed
+
+      Dim Item As MachineButton = Nothing
+      For Each Item In m_ButtonJogList
+         Select Case Item.StateFlag.Trim
+            Case K_XYJOG
+               XYBtn.Visibility = Visibility.Visible
+               XYBtn.Foreground = Brushes.White
+               XYBtn.ToolTip = "X - Y"
+            Case K_ZCJOG
+               ZCBtn.Visibility = Visibility.Visible
+               ZCBtn.Foreground = Brushes.White
+               ZCBtn.ToolTip = "Z - C"
+            Case K_ZBJOG
+               ZBBtn.Visibility = Visibility.Visible
+               ZBBtn.Foreground = Brushes.White
+               ZBBtn.ToolTip = "Z - B"
+            Case K_REMOTE
+               RemoteBtn.Visibility = Visibility.Visible
+               RemoteBtn.Foreground = Brushes.White
+               RemoteBtn.Content = "Remote"
+         End Select
+      Next
+   End Sub
+
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -286,6 +351,11 @@ Public Class DirectCutPageUC
       m_ActiveDirectCutPage = DirectCutPages.SawTest
    End Sub
 
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
@@ -315,7 +385,16 @@ Public Class DirectCutPageUC
 
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
-      Dim XYJogButton As MachineButton = m_ButtonJogList(0)
+      ' riverco in elenco il bottone XYJog
+      Dim XYJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_XYJOG Then
+            XYJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(XYJogButton) Then Return
       ' eseguo lo script lua associato
       XYJogButton.ExecuteMDICommand(XYJogButton.TLuaScriptName)
       ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
@@ -337,47 +416,103 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   Private Sub ZBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBtn.Click
-      Dim ZJogButton As MachineButton = m_ButtonJogList(1)
+   Private Sub ZCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZCBtn.Click
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZCJOG Then
+            ZJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZJogButton) Then Return
       ' eseguo lo script lua associato
       ZJogButton.ExecuteMDICommand(ZJogButton.TLuaScriptName)
    End Sub
 
-   Friend Sub ZJogChanged(bZAxes As Boolean)
+   Friend Sub ZCJogChanged(bZAxes As Boolean)
       ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
       Dim ZJogButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonJogList
-         If MachineButton.StateFlag.Trim = K_ZJOG Then
+         If MachineButton.StateFlag.Trim = K_ZCJOG Then
             ZJogButton = MachineButton
             Exit For
          End If
       Next
       If Not IsNothing(ZJogButton) Then
          ZJogButton.SetIsChecked(bZAxes)
-         ZBtn.IsChecked = bZAxes
+         ZCBtn.IsChecked = bZAxes
       End If
    End Sub
 
-   Private Sub BCBtn_Click(sender As Object, e As RoutedEventArgs) Handles BCBtn.Click
-      Dim BCJogButton As MachineButton = m_ButtonJogList(2)
+   Private Sub ZBBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBBtn.Click
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZBJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZBJOG Then
+            ZBJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZBJogButton) Then Return
       ' eseguo lo script lua associato
-      BCJogButton.ExecuteMDICommand(BCJogButton.TLuaScriptName)
+      ZBJogButton.ExecuteMDICommand(ZBJogButton.TLuaScriptName)
    End Sub
 
-   Friend Sub BCJogChanged(bBCAxes As Boolean)
+   Friend Sub ZBJogChanged(bBCAxes As Boolean)
       ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
       Dim BCJogButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonJogList
-         If MachineButton.StateFlag.Trim = K_BCJOG Then
+         If MachineButton.StateFlag.Trim = K_ZBJOG Then
             BCJogButton = MachineButton
             Exit For
          End If
       Next
       If Not IsNothing(BCJogButton) Then
          BCJogButton.SetIsChecked(bBCAxes)
-         BCBtn.IsChecked = bBCAxes
+         ZBBtn.IsChecked = bBCAxes
       End If
    End Sub
+
+   Private Sub RemoteBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoteBtn.Click
+      Dim RemoteButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_REMOTE Then
+            RemoteButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(RemoteButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = RemoteButton.TLuaScriptName
+      Else
+         sLuaFileName = RemoteButton.FLuaScriptName
+      End If
+      RemoteButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub RemoteChanged(bRemote As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim RemoteButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_REMOTE Then
+            RemoteButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(RemoteButton) Then
+         RemoteButton.SetIsChecked(bRemote)
+         RemoteBtn.IsChecked = bRemote
+      End If
+   End Sub
+
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
@@ -416,6 +551,8 @@ Public Class DirectCutPageUC
             LeftButtonGrid.Children.Remove(m_CopyTemplate)
          Case DirectCutPages.SawTest
             LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
       End Select
       If ControlsMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Remove(m_ControlsMachineButton)

DirectCuts/FlatteningCut.xaml

@@ -38,12 +38,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -125,12 +130,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/FlatteningCut.xaml.vb

@@ -66,6 +66,7 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
       m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
@@ -79,8 +80,8 @@ Public Class FlatteningCut
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -89,8 +90,8 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -444,8 +445,8 @@ Public Class FlatteningCut
       StringToLen(WidthTxBx.Text, dWidth)
       ' Recupero lo spessore della lama corrente
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       ' La larghezza della spianatura nono può essere inferiore allo spessore della lama
       m_dWid = Math.Max(dWidth, dThick)
       WidthTxBx.Text = LenToString(m_dWid, 2)
@@ -472,8 +473,8 @@ Public Class FlatteningCut
 
    Private Sub OverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OverlapTxBx.EgtClosed
       ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       '  Verifico che la sovrapposizione non sia superiore allo spessore della lama (meno 1mm di offset)
       Dim dOverlap As Double = 0
       Const MIN_OFFSET As Double = 1.0
@@ -612,6 +613,24 @@ Public Class FlatteningCut
       m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
+   ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
+   Private Function GetFootPrintTool() As Double
+      ' vedere nella pagina Allarm il capito "Incisioni"
+      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim dFootPrint As Double = 0
+      ' verifico quale lavorazione è attiva
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
+      ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
+         Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
+         GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         ' recupero informazioni della fresa in uso
+         EgtTdbSetCurrTool(sCurrMill)
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)
+      End If
+      Return dFootPrint
+   End Function
+
    Private Function CreateFlatteningCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
@@ -628,13 +647,17 @@ Public Class FlatteningCut
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
       Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' EgtSetName(nLayerId, NAME_OUTLOOP)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
+      End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
@@ -670,22 +693,21 @@ Public Class FlatteningCut
          RemoveFinalHome()
       End If
       UpdateSimulOkBtn()
-
-
-
       Return m_bCutOk
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
-      ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' Recupero spessore della lama (utensile) correntemente attiva
+      Dim dThick As Double = GetFootPrintTool()
+      If dThick = 0 Then Return False
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
       Dim vtDelta As Vector3d
       vtDelta = Vector3d.FromPolar(1, m_dAngO)
       vtDelta.Rotate(Vector3d.Z_AX, dRotAngO)
+
       ' Calcolo numero di iterazioni necessarie a coprire l'area impostata e lunghezza vettore delta
       Dim nStepNum As Integer
       Dim dDelta As Double

DirectCuts/GridCut.xaml

@@ -34,12 +34,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -131,12 +135,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/GridCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class GridCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
@@ -73,8 +73,8 @@ Public Class GridCut
       NumPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 21)
       DimPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 22)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -152,6 +152,7 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
@@ -185,6 +186,11 @@ Public Class GridCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -242,6 +248,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -256,12 +268,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -285,10 +297,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -317,6 +327,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -331,12 +347,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -358,10 +374,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/MachineButtonsUC.xaml

@@ -19,7 +19,8 @@
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
-      </Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
 
       <ToggleButton Name="MachineButton1" Grid.Column="0" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
          <Image Name="ImageButton1" Style="{StaticResource OmagCut_ButtonIcon}"/>
@@ -61,6 +62,10 @@
          <Image Name="ImageButton10" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-   </Grid>
+        <ToggleButton Name="MachineButton11" Grid.Column="10" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+            <Image Name="ImageButton11" Style="{StaticResource OmagCut_ButtonIcon}"/>
+        </ToggleButton>
+
+    </Grid>
 
 </UserControl>

DirectCuts/MachineButtonsUC.xaml.vb

@@ -10,7 +10,8 @@ Public Class MachineButtonsUC
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
-   Private Const MAX_BUTTONS As Integer = 10
+   ' 9/2 aggiunto spazio per un nuovo bottone
+   Private Const MAX_BUTTONS As Integer = 11
    Private m_nCount As Integer = 0
    Private ImageArrayY(MAX_BUTTONS - 1) As String
    Private ImageArrayN(MAX_BUTTONS - 1) As String
@@ -31,6 +32,10 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_NOTHING As String = "Nothing"
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
+   Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Private Const BTN_ENABLE_PC As String = "EnablePC"
 
    Public Sub New(Optional bOnlyLaser As Boolean = False)
       ' This call is required by the designer.
@@ -75,7 +80,10 @@ Public Class MachineButtonsUC
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
-            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED Then
+            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_PC OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_1 OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_2 Then
             ' mostra immagine fissa
             Try
                Dim s As String
@@ -112,15 +120,17 @@ Public Class MachineButtonsUC
                   EgtOutLog("Error loading image " & sImage)
                End Try
             Else
-               ' In attesa che attivono le icobne di questi pulsanti scrivo il contenuto del bottone
+               ' In attesa che attivono le icone di questi pulsanti scrivo il contenuto del bottone
                Try
                   Dim CurrToggleBtn As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
                   If StateFlagArray(nIndex) = K_XYJOG Then
                      CurrToggleBtn.Content = "X - Y"
-                  ElseIf StateFlagArray(nIndex) = K_ZJOG Then
-                     CurrToggleBtn.Content = "Z"
-                  ElseIf StateFlagArray(nIndex) = K_BCJOG Then
-                     CurrToggleBtn.Content = "C"
+                  ElseIf StateFlagArray(nIndex) = K_ZCJOG Then
+                     CurrToggleBtn.Content = "Z - C"
+                  ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
+                     CurrToggleBtn.Content = "Z - B"
+                  ElseIf StateFlagArray(nIndex) = K_REMOTE Then
+                     CurrToggleBtn.Content = "Remote"
                   End If
                Catch ex As Exception
                   EgtOutLog("Error loading content " & StateFlagArray(nIndex))
@@ -132,7 +142,8 @@ Public Class MachineButtonsUC
    End Sub
 
    Private Sub MachineButton_Click(sender As Object, e As RoutedEventArgs) Handles MachineButton1.Click, MachineButton2.Click, MachineButton3.Click, MachineButton4.Click, MachineButton5.Click,
-                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click
+                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click,
+                                                                                   MachineButton11.Click
       Dim CurrentBtn As Primitives.ToggleButton = e.Source
       ' recupero l'inidce del bottone selezionato
       Dim nIndex As Integer = GetToggleButtonIndex(CurrentBtn) - 1
@@ -151,6 +162,18 @@ Public Class MachineButtonsUC
          Return
       End If
 
+      ' Se il bottone chiamantè quello per la selezione del pannello di controllo
+      If nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC) Then
+         Dim sTLuaFile As String = sBaseDir & CommandArrayY(nIndex)
+         Dim sFLuaFile As String = sBaseDir & CommandArrayN(nIndex)
+         If m_CN.nEnablePc = 1 Then
+            ExecuteMDICommand(CurrentBtn, sTLuaFile)
+         ElseIf m_CN.nEnablePc = 2 Then
+            ExecuteMDICommand(CurrentBtn, sFLuaFile)
+         End If
+         Return
+      End If
+
       If CurrentBtn.IsChecked() Then
          'EgtLuaExecFile(sBaseDir & CommandArrayY(nIndex))
          sLuaFileName = sBaseDir & CommandArrayY(nIndex)
@@ -342,6 +365,7 @@ Public Class MachineButtonsUC
                 " EType2=" & If(Not String.IsNullOrEmpty(EType2), CInt(EType2).ToString, ""))
    End Sub
 
+#Region "STATE CHANGED"
 
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_SPINDLE)
@@ -548,7 +572,11 @@ Public Class MachineButtonsUC
    End Sub
 
    Friend Sub DoorStateChanged(DoorState As Integer)
-      ' recupero le asscociazioni con i bottoni
+      If IsNothing(DoorState) Then
+         EgtOutLog("Error: door state null!")
+         Return
+      End If
+      ' recupero le associazioni con i bottoni
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_OPENED)
       If nIndex = -1 Then Return
       ' bottone di apertura porte
@@ -558,7 +586,7 @@ Public Class MachineButtonsUC
       ' bottone di chiusura porte
       Dim DoorClosedButton As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
       ' modifico il colore dei bottoni
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorClosedButton) Then
          Select Case DoorState
             Case 0
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
@@ -566,7 +594,7 @@ Public Class MachineButtonsUC
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorOpenedButton) Then
          Select Case DoorState
             Case 0
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
@@ -578,6 +606,203 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_PARKING)
+      If nIndex = -1 Then Return
+      If ParkingState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub EnableZoneStateChanged(ZoneState As Integer)
+      Dim sFlag As String = String.Empty
+      If ZoneState = 1 Then
+         sFlag = BTN_ENABLE_ZONE_1
+      ElseIf ZoneState = 2 Then
+         sFlag = BTN_ENABLE_ZONE_2
+      End If
+      ' recupero il bottone che deve essere acceso (quindi spengo l'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, sFlag)
+
+      ' se non trovo nessun riferimento allora spengo entrambi i comandi
+      If nIndex = -1 Then
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Return
+      End If
+
+      If ZoneState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+
+      ElseIf ZoneState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub EnablePcStateChanged(PcState As Integer)
+      ' il comando ButtonY accendo il Pannello_1, il comando ButtonN accendo il Pannello_2 (uno è la negazione dell'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC)
+      If nIndex = -1 Then Return
+      If PcState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      ElseIf PcState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      Else
+         ' nessuno dei due pannelli attivo
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub TableUpChanged(TableUpState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEUP)
+      If nIndex = -1 Then Return
+      If TableUpState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub TableDownChanged(TableDownState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEDOWN)
+      If nIndex = -1 Then Return
+      If TableDownState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
    Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
@@ -589,7 +814,7 @@ Public Class MachineButtonsUC
 
    Friend Sub ZJogChanged(ByVal bZAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
-      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_ZJOG)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_ZCJOG)
       If nIndex = -1 Then Return
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bZAxes
@@ -597,85 +822,102 @@ Public Class MachineButtonsUC
 
    Friend Sub BCJogChanged(ByVal bBCAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
-      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_BCJOG)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_ZBJOG)
       If nIndex = -1 Then Return
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bBCAxes
    End Sub
+
+   Friend Sub RemoteChanged(ByVal bRemote As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_REMOTE)
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bRemote
+   End Sub
+
    '-----------------------------------------------------------------------------------------------------------------
 
+#End Region    ' State changed
+
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
-      Case 1
-         Return MachineButton1
-      Case 2
-         Return MachineButton2
-      Case 3
-         Return MachineButton3
-      Case 4
-         Return MachineButton4
-      Case 5
-         Return MachineButton5
-      Case 6
-         Return MachineButton6
-      Case 7
-         Return MachineButton7
-      Case 8
-         Return MachineButton8
-      Case 9
-         Return MachineButton9
-      Case Else
-         Return MachineButton10
+         Case 1
+            Return MachineButton1
+         Case 2
+            Return MachineButton2
+         Case 3
+            Return MachineButton3
+         Case 4
+            Return MachineButton4
+         Case 5
+            Return MachineButton5
+         Case 6
+            Return MachineButton6
+         Case 7
+            Return MachineButton7
+         Case 8
+            Return MachineButton8
+         Case 9
+            Return MachineButton9
+         Case 10
+            Return MachineButton10
+         Case Else
+            Return MachineButton11
       End Select
    End Function
 
    Private Function GetToggleButtonIndex(ByVal nBtnName As Primitives.ToggleButton) As Integer
       Select Case nBtnName.Name
-      Case MachineButton1.Name
-         Return 1
-      Case MachineButton2.Name
-         Return 2
-      Case MachineButton3.Name
-         Return 3
-      Case MachineButton4.Name
-         Return 4
-      Case MachineButton5.Name
-         Return 5
-      Case MachineButton6.Name
-         Return 6
-      Case MachineButton7.Name
-         Return 7
-      Case MachineButton8.Name
-         Return 8
-      Case MachineButton9.Name
-         Return 9
-      Case Else
-         Return 10
+         Case MachineButton1.Name
+            Return 1
+         Case MachineButton2.Name
+            Return 2
+         Case MachineButton3.Name
+            Return 3
+         Case MachineButton4.Name
+            Return 4
+         Case MachineButton5.Name
+            Return 5
+         Case MachineButton6.Name
+            Return 6
+         Case MachineButton7.Name
+            Return 7
+         Case MachineButton8.Name
+            Return 8
+         Case MachineButton9.Name
+            Return 9
+         Case MachineButton10.Name
+            Return 10
+         Case Else
+            Return 11
       End Select
    End Function
 
    Private Function GetImage(ByVal nInd As Integer) As Image
       Select Case nInd
-      Case 1
-         Return ImageButton1
-      Case 2
-         Return ImageButton2
-      Case 3
-         Return ImageButton3
-      Case 4
-         Return ImageButton4
-      Case 5
-         Return ImageButton5
-      Case 6
-         Return ImageButton6
-      Case 7
-         Return ImageButton7
-      Case 8
-         Return ImageButton8
-      Case 9
-         Return ImageButton9
-      Case Else
-         Return ImageButton10
+         Case 1
+            Return ImageButton1
+         Case 2
+            Return ImageButton2
+         Case 3
+            Return ImageButton3
+         Case 4
+            Return ImageButton4
+         Case 5
+            Return ImageButton5
+         Case 6
+            Return ImageButton6
+         Case 7
+            Return ImageButton7
+         Case 8
+            Return ImageButton8
+         Case 9
+            Return ImageButton9
+         Case 10
+            Return ImageButton10
+         Case Else
+            Return ImageButton11
       End Select
    End Function
 

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -206,6 +206,7 @@ Public Class ManualAxesMoveUC
       m_CN.MDI_command()
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
+      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
       m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub

DirectCuts/MultipleCut.xaml

@@ -35,12 +35,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -256,12 +261,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/MultipleCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class MultipleCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -72,8 +72,8 @@ Public Class MultipleCut
       NumPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 17)
       DimPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 18)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       Num1TxBl.Text = "1"
       Num2TxBl.Text = "2"
       Num3TxBl.Text = "3"
@@ -213,6 +213,10 @@ Public Class MultipleCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -270,6 +274,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -284,12 +294,14 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -312,10 +324,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
       ' Disegno il taglio
       CreateMultipleCut()
@@ -343,6 +354,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -357,12 +374,12 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -383,10 +400,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/Polishing.xaml

@@ -63,12 +63,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/Polishing.xaml.vb

@@ -23,8 +23,8 @@ Public Class Polishing
 
    Private Sub Polishing_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' assegno messaggi
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
    End Sub
 
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded

DirectCuts/SawTestUC.xaml

@@ -37,12 +37,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -80,12 +85,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
    
       </Grid>
 

DirectCuts/SawTestUC.xaml.vb

@@ -58,14 +58,14 @@ Public Class SawTestUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo test
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_LENGTH, m_dLen, m_MainWindow.GetIniFile())

DirectCuts/SingleCutUC.xaml

@@ -38,11 +38,16 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
-         </Grid>
+            <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -106,10 +111,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/SingleCutUC.xaml.vb

@@ -57,16 +57,16 @@ Public Class SingleCutUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
       SawThChBl.Text = EgtMsg(90232)   ' Spessore lama
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
@@ -137,6 +137,9 @@ Public Class SingleCutUC
       Point2Btn.IsEnabled = False
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
+
+      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -172,6 +175,12 @@ Public Class SingleCutUC
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+      SawThChBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -229,6 +238,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -242,12 +257,12 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -271,10 +286,9 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Disegno il taglio
@@ -303,6 +317,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -316,12 +336,14 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -343,10 +365,8 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -559,9 +579,13 @@ Public Class SingleCutUC
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
       Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti

DirectCuts/SingleDrillUC.xaml

@@ -0,0 +1,97 @@
+<UserControl x:Class="SingleDrillUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   mc:Ignorable="d" 
+   d:DesignHeight="597.3" d:DesignWidth="256">
+
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+        <!-- Definizione della Grid SingleCut -->
+        <Grid Name="SingleCutGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+
+            </Grid>
+
+            <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+ 
+
+            <Grid Grid.Row="9" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            </Grid>
+
+            <Grid Grid.Row="11" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</UserControl>

DirectCuts/SingleDrillUC.xaml.vb

@@ -0,0 +1,495 @@
+Imports EgtUILib
+Imports System.Collections.ObjectModel
+Public Class SingleDrillUC
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' riferimento alla macchina corrente
+   Private m_CurrentMachine As CurrentMachine
+
+   ' --------------------- VARIABILI PRESENTI NEL TAGLIO SINGOLO ---------------------
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_bPointP1Ok As Boolean = False
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_bPointP2Ok As Boolean = False
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+
+   ' Array delle modalità di acquisizione dei punti
+   Private m_PointsModeArray(2) As String
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   Private m_dDiameter As Double = 0
+
+   Private m_sCurrDrill As String = String.Empty
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+   ' Costanti che indicano la modalità di acquisizione dei punti
+   Private Enum PT_MODE As Integer
+      DRILL = 0
+      LASER = 1
+      DRAW = 2
+   End Enum
+
+   Private Sub SingleCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+
+      ' Variabile che accorcia il riferimento alla macchina corrente
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
+      ' Creo lista modalità di acquisizione punto 
+      m_PointsModeArray(PT_MODE.DRILL) = EgtMsg(90752)
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      ' la associo alla combobox
+      PointModeCmBx.ItemsSource = m_PointsModeArray
+
+      ' Assegno messaggi
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+   End Sub
+
+   Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_sCurrDrill = m_CurrentMachine.sCurrDrill
+      GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
+
+      ' recupero informazioni del foretto usato
+      EgtTdbSetCurrTool(m_sCurrDrill)
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
+
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         ' Aggiorno visualizzazione
+         SetMachineInCurrPos()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+         EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' Reset punto acquisito
+      m_bPointP1Ok = False
+      m_bPointP2Ok = False
+      ' Inizializzo primo punto acquisito dal disegno
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
+      m_ptPrev.z = m_ptRawMax.z
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      ' Imposto modalità di acquisizione punti
+      PointModeCmBx.SelectedIndex = PT_MODE.DRAW
+      SetCoordVisibility(True)
+      ShowCoord()
+      ' Reset taglio e disabilito bottone esecuzione
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+      ' Deseleziono bottone primo punto
+      Point1Btn.IsChecked = False
+      ' Aggiorno visualizzazione
+      EgtDraw()
+   End Sub
+
+   ' esco dalla pagina di foro diretto
+   Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
+      ' deselezione il bottone per acquisizione
+      Point1Btn.IsChecked = False
+      ' Verifico di essere il gestore attivo
+      If Not m_bActive Then Return
+      ' Si può selezionare solo con il tasto sinistro e se stato NULL
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
+         Return
+      End If
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Acquisisco punto da disegno
+      EgtUnProjectPoint(e.Location, m_ptPrev)
+      ' Aggiusto Z punto acquisito (è in globale)
+      Dim dPtPrevZ As Double = m_ptPrev.z
+      m_ptPrev.z = m_ptRawMax.z
+      ' Se direzione di vista calcolabile e da sopra posso aggiustare anche XY
+      Dim dAngVertDeg, dAngHorizDeg As Double
+      If EgtGetGenericView(dAngVertDeg, dAngHorizDeg) Then
+         Dim vtDir As Vector3d = Vector3d.FromSpherical(1, dAngVertDeg, dAngHorizDeg)
+         If vtDir.z > EPS_SMALL Then
+            m_ptPrev.z = dPtPrevZ
+            m_ptPrev += vtDir * (m_ptRawMax.z - m_ptPrev.z) / vtDir.z
+         End If
+      End If
+      ' Visualizzo coordinate (rispetto a 0 tavola)
+      ShowCoord()
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub PointModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles PointModeCmBx.SelectionChanged
+      SetCoordVisibility(PointModeCmBx.SelectedIndex = PT_MODE.DRAW)
+   End Sub
+
+   Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Reset punto non acquisito
+      m_bPointP1Ok = False
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Se acquisizione lama o laser
+      If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
+
+         ' Recupero la posizione macchina
+         Dim dL1, dL2, dL3, dR1, dR2 As Double
+         If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+
+         ' Ricavo dati Foretto corrente
+         Dim sDrill As String = m_sCurrDrill
+         ' Se punto da laser
+         If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
+            ' Imposto come testa corrente il laser (senza utensile ovviamente)
+            If Not EgtSetCalcTool("", "H3", 1) Then Return
+            ' Trasformo in posizione punta utensile in basso
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            ' Ora imposto la lama corrente
+            If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
+            ' Altrimenti da lama
+         Else
+            ' Imposto la lama corrente
+            If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
+            ' Trasformo in posizione punta utensile in basso
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+         End If
+         ' Calcolo direzione asse lama
+         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         ' Porto il tip nell'origine tavola
+         m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+         m_bPointP1Ok = True
+
+         ' Altrimenti punto da click di mouse
+      Else
+         ' Assegno punto selezionato nel disegno a m_ptTipP1
+         m_ptTipP1 = m_ptPrev
+         ' Porto il tip nell'origine tavola
+         m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+         m_bPointP1Ok = True
+         ' Ricavo dati lama corrente
+         Dim sDrill As String = m_sCurrDrill
+         ' Imposto la lama corrente
+         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+      End If
+
+      ' Disegno il taglio
+      CreateSingleDrill()
+      ' Disegno la macchina nella sua posizione reale
+      SetMachineInCurrPos()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
+      EgtDraw()
+      ' Seleziono il bottone per indicare che il primo punto è stato acquisito
+      Point1Btn.IsChecked = True
+   End Sub
+
+   'Private Sub GetDrillFromDrilling(ByRef sCurrDrill As String)
+   '   If String.IsNullOrEmpty(sCurrDrill) Or String.IsNullOrWhiteSpace(sCurrDrill) Then
+   '      ' creo l'elenco degli utensili di foratura
+   '      Dim sToolName As String = String.Empty
+   '      Dim nType As Integer = MCH_TY.NONE
+   '      Dim DrillToolList As New ObservableCollection(Of String)
+   '      DrillToolList.Clear()
+   '      If EgtTdbGetFirstTool(MCH_TF.DRILLBIT, sToolName, nType) Then
+   '         DrillToolList.Add(sToolName)
+   '         While EgtTdbGetNextTool(MCH_TF.DRILLBIT, sToolName, nType)
+   '            DrillToolList.Add(sToolName)
+   '         End While
+   '      End If
+   '      ' recupero l'utensile associato alla lavorazione
+   '      Dim sCurrDrilling As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
+   '      Dim ToolString As String = String.Empty
+   '      EgtMdbSetCurrMachining(sCurrDrilling)
+   '      ' Recupero nome utensile tramite TUUID
+   '      Dim sTuuid As String = String.Empty
+   '      EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
+   '      EgtTdbGetToolFromUUID(sTuuid, ToolString)
+   '      Dim bToolExist As Boolean = False
+   '      For Each CurrTool As IEnumerable In DrillToolList
+   '         If CurrTool.ToString() = ToolString Then
+   '            bToolExist = True
+   '            Exit For
+   '         End If
+   '      Next
+   '      If bToolExist Then
+   '         sCurrDrill = ToolString
+   '      Else
+   '         sCurrDrill = String.Empty
+   '      End If
+   '   End If
+   'End Sub
+
+   Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
+      ' Recupero il valore della coordinata (in 0 Tab)
+      Dim dXcoord As Double = 0
+      StringToLen(XcoordTxBx.Text, dXcoord)
+      XcoordTxBx.Text = LenToString(dXcoord, 2)
+      ' lo assegno al punto corrente (in 0 Macc)
+      m_ptPrev.x = dXcoord + m_ptTabOri.x
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub YcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles YcoordTxBx.EgtClosed
+      ' Recupero il valore della coordinata (in 0 Tab)
+      Dim dYcoord As Double = 0
+      StringToLen(YcoordTxBx.Text, dYcoord)
+      YcoordTxBx.Text = LenToString(dYcoord, 2)
+      ' lo assegno al punto corrente (in 0 Macc)
+      m_ptPrev.y = dYcoord + m_ptTabOri.y
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage( "Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateSingleDrill() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bPointP1Ok Or Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Recupero spessore lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      GetDrillFromDrilling(sDrill, m_MainWindow.m_CurrentMachine.sCurrDrilling)
+      EgtTdbSetCurrTool(sDrill)
+      Dim dDiam As Double = 0
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId = CreateDirectCutPart()
+      Dim nLayerId = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_INLOOP)
+      ' Creo il Drill
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+
+      ' Creo layer per crocetta di riferimento
+      Dim nCrossLayerId = EgtCreateGroup(nPartId)
+      ' Aggiungo crocetta/e
+      If m_bPointP1Ok Then
+         CreateCross(nCrossLayerId, ptStart)
+      End If
+
+      Dim nCutId = EgtCreateCircle(nLayerId, ptStart, m_dDiameter / 2)
+
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   ' crea una croce nel punto indicato e rappresenta il diametro dell'utensile corrente
+   Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ' Aggiungo crocette
+      ptP += New Vector3d(0, 0, 0.15)
+      Dim vtCrossX As New Vector3d(20, 0, 0)
+      Dim vtCrossY As New Vector3d(0, 20, 0)
+      Dim nCrossId1 = EgtCreateLine(nLayerId, ptP + (-vtCrossX), ptP + vtCrossX)
+      EgtSetColor(nCrossId1, New Color3d(255, 0, 0))
+      Dim nCrossId2 = EgtCreateLine(nLayerId, ptP + (-vtCrossY), ptP + vtCrossY)
+      EgtSetColor(nCrossId2, New Color3d(255, 0, 0))
+      Dim nPntId = EgtCreateGeoPoint(nLayerId, ptP)
+      EgtSetColor(nPntId, New Color3d(255, 0, 0))
+      Dim nCirleId = EgtCreateCircle(nLayerId, ptP, m_dDiameter / 2)
+      EgtSetColor(nCirleId, New Color3d(0, 255, 0))
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class

DrawImport/AlzFrontUC.xaml

@@ -165,12 +165,13 @@
                 <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
                 <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <!--<RowDefinition Height="1*"/>-->
             </Grid.RowDefinitions>
 
+            <!-- Altezza delle alette --> 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
                            Text="Offset"
                            Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
@@ -187,12 +188,15 @@
                                   Width="60" Height="30" Margin="0,0,0,0"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             
-
+            <!-- Delta angolo (abilitato solo per i frontalini) -->
             <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
                        Text="Offset2"
                        Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                        FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <!-- temporaneamente disabilito la definizione delta angolo per alzatine  -->
             <EgtWPFLib:EgtTextBox Name="Parameter2ATxBx" 
+                                  IsEnabled="False"
+                                  Visibility="Collapsed"
                                   Grid.Column="2" Grid.Row="1"
                                   HorizontalAlignment="Right"
                                   Width="60" Height="30" Margin="0,0,0,0"
@@ -202,7 +206,18 @@
                                   HorizontalAlignment="Right"
                                   Width="60" Height="30" Margin="0,0,0,0"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            
+
+            <!-- Spessore aletta -->
+            <TextBlock Name="Parameter5TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                       Text="Offset2"
+                       Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.Row="2" 
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
             <!--Gestisco nello spazio di una TextBox due TextBoxs--><!--
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
@@ -236,7 +251,7 @@
                                   Width="85" Height="30"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
             
-            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="2">
+            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="3">
                 <!--questo bottone è stato creato solo per garantire il corretto allinaemento-->
                 <Button Name="Vuoto" Visibility="Hidden"/>
                 <!--Bottone per tornare indietro alla selezione di CompoInterni e Alz&Front-->

DrawImport/AlzFrontUC.xaml.vb

@@ -20,6 +20,7 @@ Public Class AlzFrontUC
 
    ' nome della info riferita alle alzatine e ai frontalini (1=Alz, 2=Front, 0=niente)
    Private Const INFO_ALZFRONT As String = "AF"
+   Private Const INFO_ENABLE As String = "EnableAF"
 
    ' Properties 
    Private m_sCompoDir As String = String.Empty
@@ -46,6 +47,8 @@ Public Class AlzFrontUC
 
    ' raggio circoscritto al pezzo
    Private m_dBBoxRad As Double
+   ' dimensione dei caratteri
+   Private m_dH As Double
 
    Private Sub AlzFrontPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
 
@@ -66,16 +69,16 @@ Public Class AlzFrontUC
       ' nascondo il bottone Back della pagina Draw
       m_MainWindow.m_DrawPageUC.BackBtn.Visibility = Visibility.Hidden
       m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
-      ' Abilito bottoni angoli di fianco e lavorazioni da sotto
-      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-      m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = True
-      m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                                       Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      ' Disabilito bottoni angoli di fianco e lavorazioni da sotto
+      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub
@@ -93,10 +96,11 @@ Public Class AlzFrontUC
       Dim LabelId As Integer = GDB_ID.NULL
 
       ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
-      GetPrivateProfileString("Alz&Front", "A_Height", "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString("Alz&Front", "F_Height", "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString("Alz&Front", "A_DeltaAng", "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString("Alz&Front", "F_DeltaAng", "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
+      Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
 
       ' Imposto contesto corrente
       EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
@@ -137,30 +141,41 @@ Public Class AlzFrontUC
 
       ' inserisco il lato nella lista 
       While CurrLine <> GDB_ID.NULL
-         ' escludo tutte le forme che non sono delle linee
-         If EgtGetType(CurrLine) = GDB_TY.CRV_LINE Then
-            ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
-            Dim sNameCurrLine As String = String.Empty
-            Dim nInfo As Integer = 0
-            EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
-            EgtGetName(CurrLine, sNameCurrLine)
-            ' inserisco la numerazione dei lati della figura
-            AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
-            ' recupero l'informazione 
-            EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
-            If nInfo = 1 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
-            ElseIf nInfo = 2 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
-            Else
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
-            End If
-            nEntityIndex += 1
-         Else
-            EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
-            nOtherIndex = nOtherIndex + 1
-         End If
+         Dim NextId As Integer = EgtGetNext(CurrLine)
+         If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+         If VerifySideAnglePossible(PrevLine, CurrLine, NextId, bOutLoop) Then
 
+            If ApprovedSideToAlzFront(CurrLine) Then
+               ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
+               Dim sNameCurrLine As String = String.Empty
+               Dim nInfo As Integer = 0
+               Dim dSideAng As Integer = 0
+               EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
+               EgtGetName(CurrLine, sNameCurrLine)
+               ' inserisco la numerazione dei lati della figura
+               AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
+               ' recupero l'informazione 
+               EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
+               If nInfo = 1 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
+               ElseIf nInfo = 2 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
+               Else
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
+               End If
+               ' inserisco riferimento univoco al lato (solo se non esiste)
+               Dim sInfoRef As String = String.Empty
+               EgtGetInfo(CurrLine, "RefAF", sInfoRef)
+               If String.IsNullOrEmpty(sInfoRef) Then
+                  Dim sRefGUID As String = System.Guid.NewGuid().ToString()
+                  EgtSetInfo(CurrLine, "RefAF", sRefGUID)
+               End If
+               nEntityIndex += 1
+            Else
+               EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
+               nOtherIndex = nOtherIndex + 1
+            End If
+         End If
          PrevLine = CurrLine
          CurrLine = EgtGetNext(CurrLine)
       End While
@@ -190,8 +205,8 @@ Public Class AlzFrontUC
             End If
          End If
       End If
-
-
+      ' aggiungo l'Info che comunica se il lato è stato modificato
+      InitList()
 
    End Sub
 
@@ -264,14 +279,34 @@ Public Class AlzFrontUC
       bInternalSelection = False
    End Sub
 
+   ' restituisce vero se il lato possiede delle info legate al sideangle
+   Private Function VerifyIsThereSideAngle(nCurrLine As Integer) As Boolean
+      Dim dSideAngle As Double
+      return EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, dSideAngle)
+   End Function
+
+   ' restituisce vero se il lato possiede delle info legate alle alette
+   Private Function VerifyIsThereAlzFront(nCurrLine As Integer) As Boolean
+      Dim nAlzFront As Integer
+      return EgtGetInfo(nCurrLine, INFO_ALZFRONT, nAlzFront) AndAlso nAlzFront <> 0
+   End Function
+
+   ' approvo la costruzione dell'aletta sul lato indicato
+   Private Function ApprovedSideToAlzFront(nCurrLine As Integer) As Boolean
+      If VerifyIsThereSideAngle(nCurrLine) And Not VerifyIsThereAlzFront(nCurrLine) Then
+         ' se esiste SideAngle e un'aletta allora NON approvo
+         Return False
+      End If
+      Return True
+   End Function
 
    ' Permette di aggiugere accanto alla linea passata
    Friend Function AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double,
                                  dBBoxRad As Double, bTextExt As Boolean, Optional bRot As Boolean = False) As Integer
       ' Calcolo altezza testo
-      Dim dH As Double = 0.05 * dBBoxRad
+      m_dH = 0.05 * dBBoxRad
       ' Creo testo
-      Dim nText As Integer = EgtCreateTextAdv(TextLayer, Point3d.ORIG(), 0, sText, "", 500, False, dH, 1, 0, INS_POS.MC)
+      Dim nText As Integer = EgtCreateTextAdv(TextLayer, Point3d.ORIG(), 0, sText, "", 500, False, m_dH, 1, 0, INS_POS.MC)
       ' Calcolo posizionamento
       ' BBox del testo e suo centro
       Dim ptMinBBox As Point3d
@@ -612,6 +647,13 @@ Public Class AlzFrontUC
       LoadCurrentCompo()
    End Sub
 
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      Dim dValue As Double
+      StringToDouble(Parameter5TxBx.Text, dValue)
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
 #End Region    ' Altezza, delta angolo di spoglia
 
 #Region "METHODS"
@@ -659,6 +701,13 @@ Public Class AlzFrontUC
       Return sSideName
    End Function
 
+   Private Sub InitList()
+      ' quando avvio la pagina inizializzo tutti i lati comunicando che non sono stati modificati
+      For j As Integer = 0 To AlzFrontEntityList.Count() - 1
+         EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 0)
+      Next
+   End Sub
+
    ' aggiorno lo stato della dell'oggetto
    Private Sub RefreshList(sSideName As String, sOppositeNameCheck As String, bIsAlz As Boolean, bIsChecked As Boolean)
       For j As Integer = 0 To AlzFrontEntityList.Count() - 1
@@ -668,6 +717,7 @@ Public Class AlzFrontUC
                AlzFrontEntityList(j).Type = AlzFrontEntity.AlzFront.NONE
                ' insrisco l'informazione nelle info del lato
                EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 0)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
                Exit For
             End If
             ' se selezione di Alz. o Front.
@@ -680,6 +730,7 @@ Public Class AlzFrontUC
                End If
                ' insrisco l'informazione nelle info del lato
                EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 1)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
             Else
                AlzFrontEntityList(j).Type = AlzFrontEntity.AlzFront.FRONTALINO
                ' deseleziono il Check opposto
@@ -689,6 +740,7 @@ Public Class AlzFrontUC
                End If
                ' inserisco l'informazione nelle info del lato
                EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 2)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
             End If
             ' termino il ciclo
             Exit For
@@ -713,9 +765,9 @@ Public Class AlzFrontUC
 
       ' recupero il nome del direttorio
       Dim sCompoDir As String = String.Empty
-      GetPrivateProfileString("Alz&Front", K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
+      GetPrivateProfileString(S_ALZFRONT, K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
       ' leggo le info inserite nel campo "Alz&Front"
-      m_MainWindow.m_DrawPageUC.m_MainComponentPage.GetPrivateProfileCompo("Alz&Front", "Alz&Front", nCompoName, sCompoFile, sCompoImage, m_MainWindow.GetIniFile())
+      m_MainWindow.m_DrawPageUC.m_MainComponentPage.GetPrivateProfileCompo(S_ALZFRONT, K_ALZFRONT, nCompoName, sCompoFile, sCompoImage, m_MainWindow.GetIniFile())
       'Dim sCompoImageSource As ImageSource
 
       ' Costruisco path completa del componente
@@ -737,6 +789,13 @@ Public Class AlzFrontUC
       If StringToLen(Parameter2FTxBx.Text, dVal) Then
          EgtLuaSetGlobNumVar("CMP.F_DeltaAng", dVal)
       End If
+      If StringToLen(Parameter5TxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.ThicknessRaw", dVal)
+      End If
+      ' parametri per la scrittura dei caratteri
+      EgtLuaSetGlobNumVar("CMP.BBoxRad", m_dBBoxRad)
+      EgtLuaSetGlobNumVar("CMP.HeightText", m_dH)
+
 
       Dim sMsg As String = String.Empty
       ' eseguo la funzione per il disegno della componente (CMP_Draw)

DrawImport/CompoDimensionUC.xaml.vb

@@ -15,6 +15,8 @@ Public Class CompoDimensionUC
    Friend m_InternalCompoPage As InternalComponentPageUC
    ' Riferimento alla pagina di selezione della alzatine
    Friend m_AlzFrontPage As AlzFrontUC
+   ' solo se è configurato il direttorio della componente allora mostro il bottone
+   Friend bEnableAlzFront As Boolean = False
 
    Private Sub CompoDimensionUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       'Creazione delle Page UserControl (per le componenti interne)
@@ -29,9 +31,17 @@ Public Class CompoDimensionUC
       m_AlzFrontPage.SetValue(Grid.ColumnSpanProperty, 2)
       m_AlzFrontPage.SetValue(Grid.RowSpanProperty, 4)
 
+      Dim sCompoDir As String = String.Empty
+      GetPrivateProfileString(S_ALZFRONT, K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
       ' definisco il nome dei comandi presenti nella pagine
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
-      AlzFrontBtn.Content = "Alzatine & Frontalini"
+      If Not String.IsNullOrEmpty(sCompoDir) Then
+         bEnableAlzFront = True
+         AlzFrontBtn.Content = "Alzatine & Frontalini"
+      Else
+         AlzFrontBtn.Visibility = Visibility.Collapsed
+      End If
+
       AddBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 48)                 ' Aggiungi
       CancelBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 49)              ' Rimuovi
    End Sub
@@ -46,7 +56,7 @@ Public Class CompoDimensionUC
       ' se arrivo dalla pagina delle componenti interne allora esco (non devo ricalcolare i parametri)
       If m_DrawPage.m_bBackFromInternalCompo Then
          ShowInternalBtn(True)
-         ShowAlzFrontBtn(True)
+         ShowAlzFrontBtn(bEnableAlzFront)
          ' Se componente interno visualizzo bottoni aggiungi rimuovi
          ShowAddRemoveBtn(m_DrawPage.m_bInternalCompo)
          ' Imposto contesto corrente e faccio uno ZoomAll della scena con il componente
@@ -64,7 +74,7 @@ Public Class CompoDimensionUC
       If m_DrawPage.sCompoName.StartsWith("PCucina") Or
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
-         ShowAlzFrontBtn(True)
+         ShowAlzFrontBtn(bEnableAlzFront)
       Else
          ShowInternalBtn(False)
          ShowAlzFrontBtn(False)
@@ -326,6 +336,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -369,5 +380,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/DrawPageUC.xaml.vb

@@ -41,6 +41,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -105,6 +108,9 @@ Public Class DrawPageUC
          Return m_nSelectedLayer
       End Get
    End Property
+   Public Sub SetCurrLayer(ByVal nCurrLayer As Integer)
+      m_nSelectedLayer = nCurrLayer
+   End Sub
 
    Enum Pages
       MainComponent
@@ -212,6 +218,14 @@ Public Class DrawPageUC
          Dim DstLnColor As New Color3d(255, 0, 0)
          GetPrivateProfileColor(S_SCENE, K_DISTLINE, DstLnColor, m_MainWindow.GetIniFile())
          DrawScene.SetDistLineMaterial(DstLnColor)
+
+         '' imposto il colore di sfondo del disegno
+         'Dim BAckTopColor As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackTop", BAckTopColor, m_MainWindow.GetIniFile())
+         'Dim BackBottom As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackBottom", BackBottom, m_MainWindow.GetIniFile())
+         'DrawScene.SetViewBackground(BAckTopColor, BackBottom)
+
          ' imposto parametri OpenGL
          Dim nDriver As Integer = GetPrivateProfileInt(S_OPENGL, K_DRIVER, 3, m_MainWindow.GetIniFile())
          Dim b2Buff As Boolean = (GetPrivateProfileInt(S_OPENGL, K_DOUBLEBUFFER, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -349,6 +363,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -451,21 +467,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -473,6 +493,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -869,6 +891,232 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   ' permette di inserire più di un part
+   Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
+
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto il contesto corrente
+      EgtSetCurrentContext(DrawScene.GetCtx())
+      Dim Pz As Integer = -1
+      Dim NxtPz As Integer = -1
+
+      ' Cancello layer regioni per selezione buchi
+      Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
+
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
+      While Pz <> -1
+         ' imposto il contesto corrente
+         EgtSetCurrentContext(DrawScene.GetCtx())
+         ' cerco un altro pezzo nell'elenco
+         NxtPz = EgtGetNextPart(Pz)
+
+         Dim SelectRegion As Integer = EgtGetFirstNameInGroup(Pz, "SelectRegion")
+         EgtErase(SelectRegion)
+         ' Cancello layer etichette, quotatura,ausiliario e box
+         EgtErase(EgtGetFirstNameInGroup(Pz, "LayAux"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Etichette"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Quotature"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Box"))
+
+         ' Cancello layer etichette dei componenti interni (buchi)
+         Dim nHLId As Integer = EgtGetFirstNameInGroup(Pz, "HoleLabels")
+         While nHLId <> GDB_ID.NULL
+            EgtErase(nHLId)
+            nHLId = EgtGetFirstNameInGroup(Pz, "HoleLabels")
+         End While
+
+         ' Attivo visualizzazione misura
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(Pz, NAME_REGION)
+         Dim nId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While nId <> GDB_ID.NULL
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               EgtSetStatus(nId, GDB_ST.ON_)
+            End If
+            nId = EgtGetNext(nId)
+         End While
+
+         ' Calcolo dimensione ingombro Pezzo tramite OutLoop
+         Dim nOutLoopLayer = EgtGetFirstNameInGroup(Pz, NAME_OUTLOOP)
+         Dim b3Part As New BBox3d
+         EgtGetBBoxGlob(nOutLoopLayer, GDB_BB.STANDARD, b3Part)
+         ' Muovo la regione in Z per evitare problemi in visualizzazione
+         EgtMove(nRegLayId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
+
+         ' Se pezzo con dati TRF
+         If m_bTrfData Then
+            ' Nome da dati Trf
+            Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+            While nTextId <> GDB_ID.NULL
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                  Dim sText As String = m_TrfOrderCode & "-" & m_TrfOrderDesc
+                  Dim sText2 As String = m_TrfMatCode & "-" & m_TrfSurfCode
+                  Dim sText3 As String = LenToString(b3Part.DimX(), 0) & " x " & LenToString(b3Part.DimY(), 0) & " x " & LenToString(m_TrfThickness, 0)
+                  Dim dRatio As Double = Math.Max(b3Part.DimX(), b3Part.DimY()) / Math.Min(b3Part.DimX(), b3Part.DimY())
+                  If dRatio < 5 Then
+                     sText = sText & "<br/>" & sText2 & "<br/>" & sText3
+                  Else
+                     sText = sText & "  " & sText2 & "  " & sText3
+                  End If
+                  EgtModifyText(nTextId, sText)
+                  Dim ptCen As Point3d
+                  EgtCenterPoint(nTextId, ptCen)
+                  Dim b3Text As New BBox3d
+                  EgtGetBBoxGlob(nTextId, GDB_BB.STANDARD, b3Text)
+                  Dim dCoeff As Double = Math.Min(b3Part.DimX() / b3Text.DimX(), b3Part.DimY() / b3Text.DimY()) / 1.25
+                  If dCoeff < 1 Then EgtScale(nTextId, New Frame3d(ptCen), dCoeff, dCoeff, dCoeff)
+                  Exit While
+               End If
+               nTextId = EgtGetNext(nTextId)
+            End While
+            ' Info di pezzo da dati Trf
+            EgtSetInfo(Pz, "OC", m_TrfOrderCode)
+            EgtSetInfo(Pz, "OD", m_TrfOrderDesc)
+            EgtSetInfo(Pz, "PC", m_TrfPartCode)
+            EgtSetInfo(Pz, "MT", m_TrfMatCode)
+            EgtSetInfo(Pz, "SRF", m_TrfSurfCode)
+            EgtSetInfo(Pz, "L", DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, "W", DoubleToString(b3Part.DimY(), 1))
+            EgtSetInfo(Pz, "T", m_TrfThickness)
+            EgtSetInfo(Pz, "V1", DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, "V2", DoubleToString(b3Part.DimY(), 1))
+            ' Se altrimenti pezzo con dati Csv
+         ElseIf m_bCsvData Then
+            ' Nome del pezzo
+            EgtSetName(Pz, m_sCsvName)
+            ' Dati Csv
+            EgtSetInfo(Pz, INFO_CSV_PART, m_sCsvName)
+            EgtSetInfo(Pz, INFO_CSV_ORD, m_sCsvOrder)
+            EgtSetInfo(Pz, INFO_CSV_DIST, m_sCsvList)
+            EgtSetInfo(Pz, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
+            EgtSetInfo(Pz, INFO_CSV_V1, DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, INFO_CSV_V2, DoubleToString(b3Part.DimY(), 1))
+            ' Se definito nome lo inserisco nel testo
+            If Not String.IsNullOrWhiteSpace(m_sCsvName) Then
+               Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+               While nTextId <> GDB_ID.NULL
+                  If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                     Dim sText As String = String.Empty
+                     EgtTextGetContent(nTextId, sText)
+                     Dim sNewText = m_sCsvName & "<br/>" & sText
+                     EgtModifyText(nTextId, sNewText)
+                     Exit While
+                  End If
+                  nTextId = EgtGetNext(nTextId)
+               End While
+            End If
+            ' Altrimenti pezzo con dati normali
+         Else
+            ' Se definito nome lo inserisco nel testo
+            If Not String.IsNullOrWhiteSpace(sName) Then
+               Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+               While nTextId <> GDB_ID.NULL
+                  If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                     Dim sText As String = String.Empty
+                     EgtTextGetContent(nTextId, sText)
+                     Dim sNewText = sName & "<br/>" & sText
+                     EgtModifyText(nTextId, sNewText)
+                     Exit While
+                  End If
+                  nTextId = EgtGetNext(nTextId)
+               End While
+            End If
+         End If
+         ' Eventuale testo per indicare il sopra (solo nel caso di rettangolo)
+         If TopChBx.IsVisible() And TopChBx.IsChecked() Then
+            Utility.AddTopToPartRegion(nRegLayId)
+         End If
+         ' Scrivo testi per nesting
+         SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
+         ' Imposto colore testi
+         Utility.SetTextColor(nRegLayId)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, InsertColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
+         ' Esporto il pezzo in un file temporaneo
+         Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPartCompo.Nge"
+         If Not EgtSaveObjToFile(Pz, sTmpFile, NGE.BIN) Then
+            Return False
+         End If
+
+         ' Passo al contesto principale
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
+         Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
+         ' Elimino eventuali precedenti pezzi vuoti
+         EgtEraseEmptyParts()
+         ' Area dei nuovi pezzi
+         Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
+         ' Se esiste il file del pezzo
+         If My.Computer.FileSystem.FileExists(sTmpFile) Then
+            ' eseguo inserimento
+            For i As Integer = 1 To nNbr
+               ' Inserisco il pezzo
+               EgtInsertFile(sTmpFile)
+               ' Ne recupero l'Id
+               Dim nId2 As Integer = EgtGetLastPart()
+               ' Aggiusto per lavorazioni
+               EgtAdjustFlatPart(nId2)
+               ' Se dati Trf assegno nome univoco
+               If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
+               ' Aggiorno l'area dei nuovi pezzi
+               dNewArea += GeomCalc.GetPartArea(nId2)
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
+               m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
+
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+               ' verifico che il pezzo sia un Piano Cucina o un Piano Bagno o un'Aletta
+               Dim sCMP As String = String.Empty
+               EgtGetInfo(nId2, "CMP", sCMP)
+               If sCMP.StartsWith("PCucina") Or sCMP.StartsWith("PBagno") Or sCMP.StartsWith("AlzFront") Then
+                  ' Aggiungo riferimento e lo inserisco in VeinMatching
+                  VeinMatching.SetRefOnPart(nId2)
+                  VeinMatching.AddPartFromDraw(nId2)
+                  ' Se richiesto posizionamento diretto, lo eseguo
+                  If bDirect Then
+                     If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
+                        ' Eventuale notifica al VeinMatching
+                        VeinMatching.OnInsertPartInRaw(nId2)
+                     End If
+                  End If
+               End If
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+
+            Next
+            ' Cancello il file
+            My.Computer.FileSystem.DeleteFile(sTmpFile)
+         End If
+         ' Aggiorno Aree totale
+         m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
+         ' passo al pezzo successivo
+         Pz = NxtPz
+      End While
+      ' Aggiorno Aree da lavorare dei pezzi
+      m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
+      m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+      ' Aggiorno ambiente principale
+      EgtZoom(ZM.ALL)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -883,7 +1131,8 @@ Public Class DrawPageUC
       ' Leggo numero di pezzi da inserire
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
-      MakeInsert(InsNbr, sPartName)
+      'MakeInsert(InsNbr, sPartName)
+      MakeMultipleInsert(InsNbr, sPartName)
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1124,6 +1373,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1137,25 +1388,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True

DrawImport/FiloTopUC.xaml

@@ -41,7 +41,11 @@
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
-   </Grid>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Center" Margin="0,0,6,0"/>
+    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,6 +25,13 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
@@ -43,14 +52,18 @@ Public Class FiloTopUC
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
       m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
       ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
       m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -74,6 +87,8 @@ Public Class FiloTopUC
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -95,4 +110,161 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+               nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/ImportPageUC.xaml.vb

@@ -576,6 +576,36 @@ Public Class ImportPageUC
       End If
    End Sub
 
+   ' metodo utilizzato per definire il colore dei pezzi DXF importati
+   Private Sub ColorRegion(nCtx As Integer)
+
+      ' Leggo dati corrispondenza colore
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(nCtx)
+      ' Ciclo sui pezzi
+      Dim PartId As Integer = EgtGetFirstPart()
+      While PartId <> GDB_ID.NULL
+         ' Ciclo sui layer delle regioni
+         Dim RegionId As Integer = EgtGetFirstNameInGroup(PartId, NAME_REGION)
+         While RegionId <> GDB_ID.NULL
+            EgtSetColor(RegionId, InsertColor)
+            ' Ciclo sulle regioni
+            Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
+            While EntId <> GDB_ID.NULL
+               If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               EntId = EgtGetNext(EntId)
+            End While
+            RegionId = EgtGetNextName(PartId, NAME_REGION)
+         End While
+         ' passo al pezzo successico
+         PartId = EgtGetNextPart(PartId)
+      End While
+      ' Aggiorno scritte per angoli sui lati
+      WriteSideAngleForNest(nCtx)
+   End Sub
+
    Private Sub UseLayerBtn_Click(sender As Object, e As RoutedEventArgs) Handles UseLayerBtn.Click
       ' Creo i pezzi
       Dim nType As Integer = If(m_nFileType = FT.NGE, FPC_TYPE.NGE, FPC_TYPE.LAYER)
@@ -589,6 +619,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -619,6 +651,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -649,6 +683,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -772,6 +808,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -781,26 +821,53 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -809,7 +876,7 @@ Public Class ImportPageUC
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
@@ -832,26 +899,26 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
@@ -871,7 +938,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -24,7 +25,7 @@ Public Class InternalComponentPageUC
       ImageCompo9.Visibility = Windows.Visibility.Hidden
       LabelCompo9.Visibility = Windows.Visibility.Visible
       ' Se i componenti interni sono più di 8 viene visualizzato il bottone "Altri" altrimenti no
-      Dim nCount As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 8 Then
          Compo9.Visibility = Windows.Visibility.Visible
       Else
@@ -163,10 +164,10 @@ Public Class InternalComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = e.Source
-      Dim CompoName As String = "InternalCompo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_INTCOMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       ' m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -252,7 +253,7 @@ Public Class InternalComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty
@@ -367,23 +378,26 @@ Public Class InternalComponentPageUC
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_MainWindow.m_DrawPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
 
-      ' torno alla pagina iniziale di selezione del piano (Compo)
-      'm_MainWindow.m_DrawPageUC.BackBtn_Click(sender, e)
-
       '--------- NUOVA GESTIONE ---------
-      ' rimuovo l'elenco di bottoni per selezionare il tipo di componente interna
-      m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
-      ' inserisco nella Grid VaribalsesGrid lo UeserControl per definire le dimensioni della componente
-      m_MainWindow.m_DrawPageUC.VariablesGrd.Children.Add(m_MainWindow.m_DrawPageUC.m_CompoDimension)
-      ' nascondo la lista dei parametri
-      m_MainWindow.m_DrawPageUC.m_CompoDimension.CollapsedAllParam()
-      ' sto uscendo dalla componente interna (quindi comunico il cambio di componente)
-      m_MainWindow.m_DrawPageUC.m_bInternalCompo = False
-      ' comunico che sto arrivando da una componente interna
-      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = True
+      If m_MainWindow.m_DrawPageUC.m_CompoDimension.bEnableAlzFront Then
+         ' rimuovo l'elenco di bottoni per selezionare il tipo di componente interna
+         m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
+         ' inserisco nella Grid VaribalsesGrid lo UeserControl per definire le dimensioni della componente
+         m_MainWindow.m_DrawPageUC.VariablesGrd.Children.Add(m_MainWindow.m_DrawPageUC.m_CompoDimension)
+         ' nascondo la lista dei parametri
+         m_MainWindow.m_DrawPageUC.m_CompoDimension.CollapsedAllParam()
+         ' sto uscendo dalla componente interna (quindi comunico il cambio di componente)
+         m_MainWindow.m_DrawPageUC.m_bInternalCompo = False
+         ' comunico che sto arrivando da una componente interna
+         m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = True
+         Return
+      End If
 
+      '--------- VECCHIA GESTIONE --------- 
+      ' torno alla pagina iniziale di selezione del piano (Compo)
+      m_MainWindow.m_DrawPageUC.BackBtn_Click(sender, e)
       'm_MainWindow.m_DrawPageUC.SelectedComponent(m_MainWindow.m_DrawPageUC.m_sMainCompo)
-      'm_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.CompoDimension
+      m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.CompoDimension
    End Sub
 
 End Class

DrawImport/MainComponentPageUC.xaml.vb

@@ -167,10 +167,10 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = "Compo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -253,7 +253,7 @@ Public Class MainComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)

DrawImport/SecondaryComponentPageUC.xaml.vb

@@ -26,17 +26,17 @@ Public Class SecondaryComponentPageUC
       Dim ImageConverter As New ImageSourceConverter
       Dim ThicknessConverter As New ThicknessConverter
 
-      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam  '"Compo" & m_MainComponentPage.GetIndexFromButton(CurrentMainBtn)
+      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam
 
       'Assegnazione immagine e testo ai Button
-      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ClearButton(nCount)
       For index As Integer = 1 To nCount
          Dim CustomThickness As Thickness = ThicknessConverter.ConvertFromString("0")
-         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, "Compo" & index, 0, m_MainWindow.GetIniFile())
+         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, S_EXTCOMPO & index, 0, m_MainWindow.GetIniFile())
          Dim sCompo As String = ""
          Dim sCompoImage As String = ""
-         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, "Compo" & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
+         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, S_EXTCOMPO & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
          Dim sCompoImageSource As ImageSource
 
          'verifico presenza immagine e la aggiungo

DrawImport/SideAngle.vb

@@ -159,7 +159,7 @@ Module SideAngle
       Return True
    End Function
 
-   Private Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
+   Friend Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
       ' Verifiche
       If LoopId = GDB_ID.NULL Or TextLayId = GDB_ID.NULL Then Return False
       ' Calcolo dimensione ingombro Loop
@@ -201,7 +201,7 @@ Module SideAngle
    Friend Sub ColorToSideAngle(nCtx As Integer)
       ' Leggo dati corrispondenza colore-angolo
       Dim CurrCSA As New ColorSideAngs
-      CurrCSA.Read( m_MainWindow.GetIniFile)
+      CurrCSA.Read(m_MainWindow.GetIniFile)
       ' Imposto contesto corrente
       EgtSetCurrentContext(nCtx)
       ' Ciclo sui pezzi
@@ -212,27 +212,27 @@ Module SideAngle
          Dim LoopId As Integer = EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP)
          While LoopId <> GDB_ID.NULL
             ' Ciclo sulle curve
-            Dim PrevId As Integer = EgtGetLastInGroup( LoopId)
-            Dim EntId As Integer = EgtGetFirstInGroup( LoopId)
+            Dim PrevId As Integer = EgtGetLastInGroup(LoopId)
+            Dim EntId As Integer = EgtGetFirstInGroup(LoopId)
             While EntId <> GDB_ID.NULL
-               Dim NextId As Integer = EgtGetNext( EntId)
-               If  NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup( LoopId)
-               If VerifySideAnglePossible( PrevId, EntId, NextId, bOutLoop) Then
+               Dim NextId As Integer = EgtGetNext(EntId)
+               If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+               If VerifySideAnglePossible(PrevId, EntId, NextId, bOutLoop) Then
                   Dim colEnt As Color3d
-                  If EgtGetColor( EntId, colEnt) Then
+                  If EgtGetColor(EntId, colEnt) Then
                      Dim dAng As Double
                      Dim dHeel As Double
-                     If CurrCSA.GetSideAngHeel( colEnt, dAng, dHeel) Then
-                        EgtSetInfo( EntId, INFO_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_ORIG_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_HEEL, dHeel)
+                     If CurrCSA.GetSideAngHeel(colEnt, dAng, dHeel) Then
+                        EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_HEEL, dHeel)
                      End If
                   End If
                End If
                PrevId = EntId
-               EntId = EgtGetNext( EntId)
+               EntId = EgtGetNext(EntId)
             End While
-            If bOutLoop then
+            If bOutLoop Then
                bOutLoop = False
                LoopId = EgtGetFirstNameInGroup(PartId, NAME_INLOOP)
             Else

DrawImport/SideAngleUc.xaml.vb

@@ -34,6 +34,7 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
 
    Private CurrEntityDrip As DripEntity
@@ -75,10 +76,12 @@ Public Class SideAngleUC
 
       ' Inizializzo lati per angoli e per gocciolatoi (ne compilo la lista e aggiungo la scritta nel disegno)
       InitSides()
-      ' Aggiorno testi nel disegno e creo i gocciolatoi
-      RefreshSideAngleText()
+      '' Aggiorno testi nel disegno e creo i gocciolatoi
+      'RefreshSideAngleText()
       ' Aggiorno check e valori
       RefreshCheckAndValue()
+      ' Aggiorno testi nel disegno e creo i gocciolatoi
+      RefreshSideAngleText()
 
       ' Gestisco visualizzazione di tutti i parametri
       If m_Mode = ModeOpt.SIDEANGLE Then
@@ -131,9 +134,18 @@ Public Class SideAngleUC
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -154,12 +166,12 @@ Public Class SideAngleUC
          m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
          Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -179,6 +191,10 @@ Public Class SideAngleUC
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
          ' Ricavo nome primo pezzo e lo sistemo
+         If m_Mode = ModeOpt.ENGRAVE And m_MainWindow.m_DrawPageUC.SelectedLayer = GDB_ID.NULL Then
+            PartId = EgtGetFirstPart()
+            m_MainWindow.m_DrawPageUC.SetCurrLayer(EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP))
+         End If
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
@@ -275,8 +291,8 @@ Public Class SideAngleUC
       ' Attualmente il vaore m_nCount è inizializzato ad "1"..
       ' Bottoni Prev Next
       If m_nCount <= MAX_LINES Then
-         PrevBtn.Visibility = Windows.Visibility.Hidden
-         NextBtn.Visibility = Windows.Visibility.Hidden
+         PrevBtn.Visibility= Windows.Visibility.Hidden
+         NextBtn.Visibility= Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -483,6 +499,7 @@ Public Class SideAngleUC
          WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
       End If
 
@@ -497,11 +514,10 @@ Public Class SideAngleUC
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
-         ' Ricavo nome primo pezzo
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
-      ElseIf m_CallingPage = MainWindow.Pages.Import Then
+         ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
          ' Recupero nome pezzo
@@ -568,8 +584,20 @@ Public Class SideAngleUC
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
             ' aggiorno i valore delle caselle di testo per le entità caricate (Start/End)
-            GetAngleTxBxFromIndex(nChIndex).Text = DoubleToString(Entity.dShortStart, 1)
-            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            If m_Mode = ModeOpt.ENGRAVE Then
+               Dim dVal As Double = 0
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_Start", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortStart = dVal
+               End If
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_End", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortEnd = dVal
+               End If
+            Else
+               'GetAngleTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_Start", 0, m_MainWindow.GetIniFile())
+               'GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
+            End If
+            GetAngleTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortEnd, 1)
          Next
       End If
    End Sub
@@ -618,7 +646,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -738,6 +766,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If
@@ -809,6 +841,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -819,10 +854,14 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -845,11 +884,12 @@ Public Class SideAngleUC
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1283,11 +1323,16 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub
 

Frames/FrameCutPageUC.xaml

@@ -78,7 +78,10 @@
 
          <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
             <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+             
             <Grid>
                <Button Name="SelGuideBtn" 
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
@@ -112,9 +115,13 @@
 
          <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
             <Button Name="MirrorPartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="RemovePartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
          </UniformGrid>
 
          <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"

Frames/FrameCutPageUC.xaml.vb

@@ -61,12 +61,12 @@ Public Class FrameCutPageUC
          m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 13))        'Arco
          m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 14))        'Guida
       End If
-      SelSectionBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 15)   'Sezione
+      SelSectionBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 15)   'Sezione
       SelGuideBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 16)     'Guida
       ArcRadTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 17)         'Rad
       ArcAngTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 18)         'Ang
-      MirrorPartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
-      RemovePartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
+      MirrorPartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
+      RemovePartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y

Machine/AlarmsPageUC.xaml

@@ -10,27 +10,27 @@
    <!-- Definizione della AlarmsPage -->
    <Border Style="{DynamicResource OmagCut_PageBorder}" >
 
-      <Grid>
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="3*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="0.5*"/>
-             
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="3*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="0.5*"/>
 
-          <!--Costruisco le riche per la colonna 3-->
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!--Costruisco le riche per la colonna 3-->
             <Grid Grid.Column="2" Grid.RowSpan="9">
                 <Grid.RowDefinitions>
                     <!--GruopBox: taglio lama-->
@@ -51,7 +51,7 @@
                     <RowDefinition Height="1*"/>
                     <RowDefinition Height="0.375*"/>
                 </Grid.RowDefinitions>
-                
+
                 <!--Parametri Taglio Lama: 5 Parametri-->
                 <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="4">
                     <!--definizione della grigli ainterna-->
@@ -92,8 +92,8 @@
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                         <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
                                   Style="{StaticResource OmagCut_CheckBox_Single}" 
-                                  HorizontalAlignment="Right"/>                        
-                        
+                                  HorizontalAlignment="Right"/>
+
                     </Grid>
 
                 </GroupBox>
@@ -200,7 +200,7 @@
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
                             <CheckBox Name="WjIntCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                                       HorizontalAlignment="Right" Margin="0,0,10,0"/>
-                        
+
                         </Grid>
                     </GroupBox>
 
@@ -218,78 +218,78 @@
                 </GroupBox>
 
             </Grid>
-          
-         <Grid Grid.RowSpan="3">
-            <Grid.RowDefinitions>
-               <RowDefinition Height="1.75*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
 
-            <GroupBox Name="SetUpGpBx" Grid.ColumnSpan="3" Grid.RowSpan="9"
+            <Grid Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1.75*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <GroupBox Name="SetUpGpBx" Grid.ColumnSpan="3" Grid.RowSpan="9"
                Style="{DynamicResource OmagCut_GroupBox}">
 
-               <Grid Name="CurrToolsGrid" Grid.ColumnSpan="2">
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="0.5*"/>
-                     <ColumnDefinition Width="3*"/>
-                     <ColumnDefinition Width="0.5*"/>
-                  </Grid.ColumnDefinitions>
-                  <Grid.RowDefinitions>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                  </Grid.RowDefinitions>
+                    <Grid Name="CurrToolsGrid" Grid.ColumnSpan="2">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="0.5*"/>
+                            <ColumnDefinition Width="3*"/>
+                            <ColumnDefinition Width="0.5*"/>
+                        </Grid.ColumnDefinitions>
+                        <Grid.RowDefinitions>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                        </Grid.RowDefinitions>
 
-                  <TextBlock Name="CurrSawTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrSawTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-                  <ComboBox x:Name="CurrSawCmBx" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_ComboBox}">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox x:Name="CurrSawCmBx" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_ComboBox}">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="AuxiliaryToolTxBl" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="3"
+                        <TextBlock Name="AuxiliaryToolTxBl" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="AuxiliaryToolCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="AuxiliaryToolCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrDrillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrDrillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrDrillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrDrillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrMillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrMillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrMillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrMillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrCupWheelTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrCupWheelTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
                         <ComboBox Name="CurrCupWheelCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
@@ -303,24 +303,24 @@
                         <TextBlock Name="CurrWJetTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrWJetCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrWJetCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <Button Name="SetUpBtn"  Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Visibility="Hidden"
+                        <Button Name="SetUpBtn"  Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Visibility="Hidden"
                      Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-               </Grid>
+                    </Grid>
 
-            </GroupBox>
+                </GroupBox>
 
-         </Grid>
+            </Grid>
 
-         <!--<Grid Grid.Column="2" Grid.Row="2" Grid.RowSpan="6">
+            <!--<Grid Grid.Column="2" Grid.Row="2" Grid.RowSpan="6">
             <Grid.ColumnDefinitions>
                <ColumnDefinition />
                <ColumnDefinition />
@@ -424,96 +424,106 @@
 
          </Grid>-->
 
-         <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+            <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
             Grid.Row="3" Grid.ColumnSpan="1" Grid.RowSpan="5">
 
-            <Grid>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="2.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="2.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ListBox Name="MaterialsLstBx" Grid.RowSpan="2">
-                  <ListBox.ItemTemplate>
-                     <DataTemplate>
-                        <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                     </DataTemplate>
-                  </ListBox.ItemTemplate>
-               </ListBox>
+                    <ListBox Name="MaterialsLstBx" Grid.RowSpan="2">
+                        <ListBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ListBox.ItemTemplate>
+                    </ListBox>
 
-               <EgtWPFLib:EgtTextBox Name="MatNameTxBx" Grid.Row="1" Width="240" Visibility="Hidden"
+                    <EgtWPFLib:EgtTextBox Name="MatNameTxBx" Grid.Row="1" Width="240" Visibility="Hidden"
                   Style="{DynamicResource OmagCut_KeyboardTextBox}" />
 
-               <UniformGrid Grid.Row="2" Columns="2">
-                  <Button Name="NewMatBtn" Grid.Column="1"
+                    <UniformGrid Grid.Row="2" Columns="2">
+                        <Button Name="NewMatBtn" Grid.Column="1"
                      Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-                  <Button Name="RemoveMatBtn" Grid.Column="1"
+                        <Button Name="RemoveMatBtn" Grid.Column="1"
                      Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               </UniformGrid>
+                    </UniformGrid>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1"
+            <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1"
                      Grid.Row="0" Grid.ColumnSpan="1" Grid.RowSpan="3">
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="CurrSawingTxBl" Grid.Column="0" Grid.Row="0"
+                    <TextBlock Name="CurrSawingTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrSawingTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrSawingTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-                  <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrMillingTxBl" Grid.Column="0" Grid.Row="2"
+                    <TextBlock Name="CurrMillingTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrMillingTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrMillingTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrPocketingTxBl" Grid.Column="0" Grid.Row="3"
+                    <TextBlock Name="CurrPocketingTxBl" Grid.Column="0" Grid.Row="3"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrPocketingTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrPocketingTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrWaterJettingTxBl" Grid.Column="0" Grid.Row="4"
+                    <TextBlock Name="CurrWaterJettingTxBl" Grid.Column="0" Grid.Row="4"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
+
+                    <Grid Grid.Column="1" Grid.Row="4">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="5*"/>
+                            <ColumnDefinition Width="1.5*"/>
+                        </Grid.ColumnDefinitions>
+                        <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="0" Margin="10,0,5,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+                        <EgtWPFLib:EgtTextBox Name="CurrWaterJettingQualityTxBx" Grid.Column="1" Margin="0,0,10,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+                    </Grid>
+
+
+                    <TextBlock Name="CurrDripSawingTxBl" Grid.Column="0" Grid.Row="5"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                    <EgtWPFLib:EgtTextBox Name="CurrDripSawingTxBx" Grid.Column="1" Grid.Row="5" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrDripSawingTxBl" Grid.Column="0" Grid.Row="5"
+                    <TextBlock Name="CurrDripDrillingTxBl" Grid.Column="0" Grid.Row="6"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrDripSawingTxBx" Grid.Column="1" Grid.Row="5" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrDripDrillingTxBx" Grid.Column="1" Grid.Row="6" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrDripDrillingTxBl" Grid.Column="0" Grid.Row="6"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrDripDrillingTxBx" Grid.Column="1" Grid.Row="6" Margin="10,0,10,0"
-                  Style="{DynamicResource OmagCut_FixedTextBox}" />
+                </Grid>
 
-            </Grid>
+            </GroupBox>
 
-         </GroupBox>
-
-         <!--<GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="2">
+            <!--<GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="2">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -551,51 +561,51 @@
 
          </GroupBox>-->
 
-         <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition />
-               <ColumnDefinition />
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-            </Grid.RowDefinitions>
+            <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition />
+                    <ColumnDefinition />
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                </Grid.RowDefinitions>
 
-            <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="2">
-               <Grid Grid.Column="2" Grid.Row="1">
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
+                <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                    <Grid Grid.Column="2" Grid.Row="1">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="2*"/>
+                        </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="SafeZTxBl" Grid.Column="0"
+                        <TextBlock Name="SafeZTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="SafeZTxBx" Grid.Column="1" Margin="10,0,10,0"
+                        <EgtWPFLib:EgtTextBox Name="SafeZTxBx" Grid.Column="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </Grid>
+                    </Grid>
 
-            </GroupBox>
+                </GroupBox>
 
-            <Border Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" Grid.RowSpan="2">
-               <Grid >
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
+                <Border Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                    <Grid >
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="2*"/>
+                        </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="AdditionalTableTxBl" Grid.Column="0"
+                        <TextBlock Name="AdditionalTableTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                  <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Margin="10,0,10,0"
+                        <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </Grid>
+                    </Grid>
 
-            </Border>
+                </Border>
 
-         </Grid>
+            </Grid>
 
-         <!--<GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="8">
+            <!--<GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="8">
             <Grid>
                <TextBlock Name="FinalHomeTxBl"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
@@ -605,199 +615,208 @@
 
          </GroupBox>-->
 
-         <GroupBox Name="NestingParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3">
-            <Grid Name="NestingGrid">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/> 
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+            <GroupBox Name="NestingParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3">
+                <Grid Name="NestingGrid">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="CompleteCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2"
+                    <TextBlock Name="CompleteCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="CompleteCutsChBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="CompleteCutsChBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                <!--Allineato-->
-               <TextBlock Name="AlignTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                    <!--Allineato-->
+                    <TextBlock Name="AlignTxBl" Grid.Row="1" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="AlignChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="AlignChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                <!--Ghigliottina-->
-                <TextBlock Name="GhigliottinaTxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                    <!--Ghigliottina-->
+                    <TextBlock Name="GhigliottinaTxBl" Grid.Row="2" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="GhigliottinaChBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-                
-                <!--Automatico-->
-               <TextBlock Name="AutomaticTxBl" Grid.Row="3" Grid.ColumnSpan="2"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="AutomaticChBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="GhigliottinaChBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-               
+                    <!--Automatico-->
+                    <TextBlock Name="AutomaticTxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="AutomaticChBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+
 
                 </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="AutoRawImageParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
-
-               <Grid Grid.ColumnSpan="2">
-                  <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="0.5*"/>
+            <GroupBox Name="AutoRawImageParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                  </Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-                  <Button Name="BackImageBtn" Grid.Column="1"
+                    <Grid Grid.ColumnSpan="2">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="0.5*"/>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="0.5*"/>
+                        </Grid.ColumnDefinitions>
+
+                        <Button Name="BackImageBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-               </Grid>
+                    </Grid>
 
-               <TextBlock Name="ThresholdTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="ThresholdTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ThresholdTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="ThresholdTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               <TextBlock Name="ToleranceTxBl" Grid.Column="0" Grid.Row="2"
+                    <TextBlock Name="ToleranceTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ToleranceTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="ToleranceTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="CutFredGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+            <GroupBox Name="CutFredGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
             Grid.Row="2" Grid.RowSpan="1">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="CfrLenTxBl" Grid.Column="0"
+                    <TextBlock Name="CfrLenTxBl" Grid.Column="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CfrLenTxBx" Grid.Column="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CfrLenTxBx" Grid.Column="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               <TextBlock Name="CfrPercTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="CfrPercTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-          <!--Incisioni--> 
-         <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+            <!--Incisioni-->
+            <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
             Grid.Row="3" Grid.RowSpan="3">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-                <!--Utilizza fresa-->
-               <TextBlock Name="TmEnableTxBl" Grid.Column="0" Grid.Row="0"
+                    <!--Utilizza fresa-->
+                    <TextBlock Name="TmEnableTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="TmEnableChBx" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="TmEnableChBx" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="10,0,10,0"/>
-                <!--Affondamento-->
-               <TextBlock Name="TmDepthTxBl" Grid.Column="0" Grid.Row="1"
+                    <!--Affondamento-->
+                    <TextBlock Name="TmDepthTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="TmDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="TmDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                <!--Larghezza-->
-               <TextBlock Name="TmWidthTxBl" Grid.Column="0" Grid.Row="2"
+                    <!--Larghezza-->
+                    <TextBlock Name="TmWidthTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="TmWidthTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="TmWidthTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
 
-         <Border  Name="SideAngCutProbeGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="6">
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="SideAngCutProbeTxBl" Grid.Column="0" Grid.Row="0"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="SideAngCutProbeChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-            </Grid>
-
-         </Border>
-
-         <Border Name="WashingGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="7">
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="WashingTxBl" Grid.Column="0" Grid.Row="0"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="WashingChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-            </Grid>
-
-         </Border>
-
-         <!--Cornici-->
-         <GroupBox Name="FrameGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="8">
+            <Border  Name="SideAngCutProbeGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="6">
                 <Grid >
-                 <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="1*"/>
-                 </Grid.ColumnDefinitions>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-                 <TextBlock Name="FramePauseTxBl" Grid.Column="0" Grid.Row="0"
+                    <TextBlock Name="SideAngCutProbeTxBl" Grid.Column="0" Grid.Row="0"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="SideAngCutProbeChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+                </Grid>
+
+            </Border>
+
+            <Border Name="WashingGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="7">
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="WashingTxBl" Grid.Column="0" Grid.Row="0"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="WashingChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+                </Grid>
+
+            </Border>
+
+            <!--Cornici-->
+            <GroupBox Name="FrameGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="8">
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="FramePauseTxBl" Grid.Column="0" Grid.Row="0"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                 <CheckBox Name="FramePauseChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="FramePauseChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
                HorizontalAlignment="Right" Margin="0,0,10,0"/>
-             </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-            <UniformGrid Columns="4" Grid.Row="8">
-            <Button x:Name="SawProbingBtn"
+            <Grid Grid.Column="0" Grid.Row="8">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2.5*"/>
+                    <ColumnDefinition Width="5*"/>
+                    <ColumnDefinition Width="2*"/>
+                </Grid.ColumnDefinitions>
+                <Button x:Name="SawProbingBtn"
          	   Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-               <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
-            </Button>
+                    <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+                </Button>
 
-         </UniformGrid>
-
-      </Grid>
-
-   </Border>
+                
+                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="2"
+                  HorizontalAlignment="Right" Margin="10,0,10,0"/>
+            </Grid>
+            
+        </Grid>
+    </Border>
 
 </UserControl>

Machine/AlarmsPageUC.xaml.vb

@@ -109,6 +109,7 @@ Public Class AlarmsPageUC
       CurrDripDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 6)          ' DripDrilling
       FrameGpBx.Header = EgtMsg(91068)                                   ' Cornici
       FramePauseTxBl.Text = EgtMsg(91067)                                ' Inserisci pausa
+      UseLaserOriginTxBl.Text = EgtMsg(91129)                            ' Usa laser per origine
       AutoRawImageParamGpBx.Visibility = Windows.Visibility.Hidden
    End Sub
 
@@ -118,6 +119,14 @@ Public Class AlarmsPageUC
          ' Variabile che accorcia il riferimento alla macchina corrente
          m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
+         ' in assenza dell'uscita H1 nascondo i parametri lama
+         If EgtGetHeadId("H1") = GDB_ID.NULL Then
+            SawGpBx.Visibility = Visibility.Hidden
+            TopMillGpBx.Visibility = Visibility.Hidden
+            CurrSawTxBl.Visibility = Visibility.Hidden
+            CurrSawCmBx.Visibility = Visibility.Hidden
+         End If
+
          ' Verifico la configurazione della macchina per creare i combobox
          Select Case m_CurrentMachine.MountedToolConfig
             Case CurrentMachine.MountedToolConfigs.SAW
@@ -132,7 +141,7 @@ Public Class AlarmsPageUC
                ' Disattivo il gruppo dei parametri fori
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
-               'Non faccio alcunchè
+            'Non faccio alcunchè
             Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
                'Da implementare
          End Select
@@ -151,7 +160,7 @@ Public Class AlarmsPageUC
 
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
-            WJsParamGpBx.Visibility = Visibility.Hidden
+            WjsParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -164,7 +173,7 @@ Public Class AlarmsPageUC
          End If
 
          ' Abilitazione Feed ridotta su inizio/fine tagli
-         If m_CurrentMachine.bFsevEnable Then
+         If m_CurrentMachine.bFsevEnable And EgtGetHeadId("H1") <> GDB_ID.NULL Then
             CutFredGpBx.Visibility = Windows.Visibility.Visible
          Else
             CutFredGpBx.Visibility = Windows.Visibility.Hidden
@@ -179,11 +188,16 @@ Public Class AlarmsPageUC
          m_bFirst = False
       End If
 
-      ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
-      CreateToolList(MCH_TF.SAWBLADE, m_SawList)
+         ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
+         CreateToolList(MCH_TF.SAWBLADE, m_SawList)
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
+      ' nascondo la lista dei materiali solo se macchina WaterJet
+      If m_CurrentMachine.bWaterJet Then
+         MaterialsGpBx.Visibility = Visibility.Hidden
+      End If
+
       ' Verifico la configurazione della macchina per creare i combobox
       Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
@@ -296,8 +310,13 @@ Public Class AlarmsPageUC
       EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
       ExtArcMinRadTxBx.Text = LenToString(dVal, 2)
       ' Leggo se PreCutExit attivo (per taglio ceramico)
-      PreCutExitChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_PRECUTEXIT, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim nPreCutExit As Integer = GetPrivateProfileInt(S_MACH_NEST, K_MACH_PRECUTEXIT, -1, m_MainWindow.GetMachIniFile())
+      If nPreCutExit = -1 Then
+         PreCutExitTxBl.Visibility = Visibility.Hidden
+         PreCutExitChBx.Visibility = Visibility.Hidden
+      Else
+         PreCutExitChBx.IsChecked = ( nPreCutExit <> 0)
+      End If
       ' Leggo angolo di fianco massimo arco interno
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, 45, m_MainWindow.GetMachIniFile())
       EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
@@ -369,8 +388,20 @@ Public Class AlarmsPageUC
       ' Leggo parametri per variazione feed in tagli
       CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
       CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
+      ' leggo flag per tavola definita da laser
+      Dim nUseLaserOrigin As Integer = GetPrivateProfileInt(S_TABLE, K_USELASERORIGIN, -1, m_MainWindow.GetMachIniFile())
+      If nUseLaserOrigin = -1 Then
+         UseLaserOriginTxBl.Visibility = Visibility.Hidden
+         UseLaserOriginChBx.Visibility = Visibility.Hidden
+      Else
+         UseLaserOriginTxBl.Visibility = Visibility.Visible
+         UseLaserOriginChBx.IsChecked = (nUseLaserOrigin <> 0)
+      End If
+
    End Sub
 
+   ' aggiorna le text delle lavorazioni (la selezione avviene nella pagina del grezzo o dalla pagina del progetto corrente)
    Private Sub RefreschMachining()
       If m_CurrentMachine.sCurrSawing <> String.Empty Then
          CurrSawingTxBx.Text = m_CurrentMachine.sCurrSawing
@@ -408,9 +439,26 @@ Public Class AlarmsPageUC
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        5,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 2)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        10,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Collapsed
+         End If
       Else
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden
+         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Hidden
       End If
       If m_CurrentMachine.sCurrDripSawing <> String.Empty Then
          CurrDripSawingTxBx.Text = m_CurrentMachine.sCurrDripSawing
@@ -532,6 +580,8 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
    ' -- DRILL --
@@ -541,7 +591,7 @@ Public Class AlarmsPageUC
       If CurrDrillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrDrill = String.Empty
          m_CurrentMachine.sCurrDrilling = String.Empty
-      ' Assegno foretto
+         ' Assegno foretto
       Else
          m_CurrentMachine.sCurrDrill = CurrDrillCmBx.SelectedItem.ToString()
          ' Reset fresa, waterjet e relative lavorazioni
@@ -565,6 +615,8 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
    ' -- MILL --
@@ -574,7 +626,7 @@ Public Class AlarmsPageUC
       If CurrMillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrMill = String.Empty
          m_CurrentMachine.sCurrMilling = String.Empty
-      ' Assegno fresa
+         ' Assegno fresa
       Else
          m_CurrentMachine.sCurrMill = CurrMillCmBx.SelectedItem.ToString()
          ' Reset foretto, waterjet e relative lavorazioni
@@ -598,6 +650,8 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
    ' -- CUPWHEEL --
@@ -631,6 +685,8 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
    ' -- WATERJET --
@@ -640,7 +696,7 @@ Public Class AlarmsPageUC
       If CurrWJetCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrWaterJet = String.Empty
          m_CurrentMachine.sCurrWaterJetting = String.Empty
-      ' Assegno Waterjet
+         ' Assegno Waterjet
       Else
          m_CurrentMachine.sCurrWaterJet = CurrWJetCmBx.SelectedItem.ToString()
          ' Reset foretto, fresa e relative lavorazioni
@@ -662,6 +718,8 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
 #End Region    'Selection: SAW, DRILL, MILL, CUPWHEEL, WATERJET
@@ -841,7 +899,7 @@ Public Class AlarmsPageUC
       Else
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "0", m_MainWindow.GetMachIniFile())
       End If
-   End Sub 
+   End Sub
 
    Private Sub TmDepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles TmDepthTxBx.EgtClosed
       Dim dVal As Double = 0
@@ -977,6 +1035,14 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   Private Sub UseLaserOriginChBx_Click() Handles UseLaserOriginChBx.Click
+      If UseLaserOriginChBx.IsChecked() Then
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
    Private Sub WashingChBx_Click(sender As Object, e As RoutedEventArgs) Handles WashingChBx.Click
       If WashingChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_WASHING, "1", m_MainWindow.GetMachIniFile())
@@ -1010,6 +1076,14 @@ Public Class AlarmsPageUC
    End Sub
 
    Private Sub SawProbingBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawProbingBtn.Click
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
       ' Recupero utensile da tastare

Machine/ChooseToolWD.xaml

@@ -3,9 +3,11 @@
     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
     xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
     FontFamily="{DynamicResource OmagCut_Font}"
-    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
 
-   <Border Style="{DynamicResource OmagCut_Border}">
+    <Border Style="{DynamicResource OmagCut_Border}">
       <Grid>
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="0.5*"/>

Machine/CurrentMachine.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports EgtWPFLib5
 Imports EgtUILib
 
 Public Class CurrentMachine
@@ -24,7 +25,13 @@ Public Class CurrentMachine
    ' Ritardo tra reset e invio programma per NUM
    Private m_nResetSendDelay As Integer = 1000
 
+   ' tempo di arresto sospensione dei Thread prima dopo aver lanciato il comando CN
+   Private m_nThreadSleep As Integer = 150
+
    ' Dati su linea di produzione
+   Private m_bDemo As Boolean = False
+   Public nLastProjSentToViewDEMO As Integer = 0
+
    Private m_bProdLine As Boolean = False
    Private m_sVarProg1 As String = "E80021"
    Private m_nProg1 As Integer = 901
@@ -70,6 +77,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Abilitazione DB WaterJet
+   Private m_bFromDBWaterJet As Boolean = False
+
    ' Flag per visualizzazione TcPos, Testa/uscita e Note utente
    Private m_nShowToolChanger As Integer = 0                 ' 0=no, 1=tutti utensili, 2=solo lame
    Private m_bShowHeadExit As Boolean = False
@@ -108,6 +118,7 @@ Public Class CurrentMachine
    Private m_sCurrDripSawing As String = String.Empty
    Private m_sCurrDripDrilling As String = String.Empty
    Private m_sCurrWaterJetting As String = String.Empty
+   Private m_sCurrWaterJettingQuality As String = String.Empty
 
    ' Spessore sottopezzo
    Private m_dAdditionalTable As Double = 0
@@ -151,6 +162,9 @@ Public Class CurrentMachine
    ' Lista dei materiali
    Private m_Materials As New ObservableCollection(Of Material)
 
+   ' Lista delle qualità di lavorazioni disponibili nel WaterJet
+   Private m_Qualities As New ObservableCollection(Of String)
+
    ' Massimo id della lista materiali nel file ini
    Private m_MaxIdMat As Integer = 0
 
@@ -216,6 +230,18 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property nThreadSleep As Integer
+      Get
+         Return m_nThreadSleep
+      End Get
+   End Property
+
+   Friend ReadOnly Property bDemo As Boolean
+      Get
+         Return m_bDemo
+      End Get
+   End Property
+
    Friend ReadOnly Property bProdLine As Boolean
       Get
          Return m_bProdLine
@@ -413,6 +439,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bFromDBWaterJet As Boolean
+      Get
+         Return m_bFromDBWaterJet
+      End Get
+   End Property
+
    Friend ReadOnly Property ShowToolChanger As Integer
       Get
          Return m_nShowToolChanger
@@ -691,6 +723,17 @@ Public Class CurrentMachine
       End Set
    End Property
 
+   Friend Property sCurrWaterJettingQuality As String
+      Get
+         Return m_sCurrWaterJettingQuality
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, value, sMachIniFile) Then
+            m_sCurrWaterJettingQuality = value
+         End If
+      End Set
+   End Property
+
    Friend ReadOnly Property WaterJettingActive As Double
       Get
          Return m_bWaterJetting AndAlso Not String.IsNullOrWhiteSpace(m_sCurrWaterJetting)
@@ -709,6 +752,7 @@ Public Class CurrentMachine
          End Select
       End Get
       Set(value As Double)
+         Dim dValue As Double = 0
          Select Case GetCurrentTable()
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
@@ -717,14 +761,24 @@ Public Class CurrentMachine
                   m_dTab3AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
                End If
-            Case 2
+                  Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
                   m_dTab2AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, value)
+                  End If
                End If
             Case Else
                If Math.Abs(value - m_dAdditionalTable) > EPS_SMALL And
@@ -733,6 +787,11 @@ Public Class CurrentMachine
                   m_dAdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, value)
+                  End If
                End If
          End Select
       End Set
@@ -885,6 +944,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property Qualities As ObservableCollection(Of String)
+      Get
+         Return m_Qualities
+      End Get
+   End Property
+
    Friend Sub AddMaterial(value As Material)
       For Each Material As Material In Materials
          If Material.nId = value.nId Then
@@ -966,7 +1031,11 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         If bWaterJet And bFromDBWaterJet Then
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
+         Else
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         End If
          m_CurrMat = value
       End Set
    End Property
@@ -1017,12 +1086,15 @@ Public Class CurrentMachine
       m_dDeltaC = GetPrivateProfileDouble(S_AXES, K_DELTA_C, 0.0, sMachIniFile)
       ' Leggo ritardo tra reset e send per NUM
       m_nResetSendDelay = GetPrivateProfileInt(S_NCNUM, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCNUM, K_THREADSLEEP, 150, sMachIniFile)
       ' Leggo se linea di produzione e parametri relativi
       m_bProdLine = (GetPrivateProfileInt(S_PRODUCTIONLINE, K_ACTIVE, 0, sMachIniFile) <> 0)
       If m_bProdLine And Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.PRODUCTION_LINE) Then
          m_bProdLine = False
          EgtOutLog("Error - Production line requested but not key enabled")
       End If
+      m_bDemo = (GetPrivateProfileInt(S_PRODUCTIONLINE, "Demo", 0, sMachIniFile) <> 0)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG1, "", m_sVarProg1, sMachIniFile)
       m_nProg1 = GetPrivateProfileInt(S_PRODUCTIONLINE, K_NAMEPROG1, 0, m_MainWindow.GetMachIniFile())
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG2, "", m_sVarProg2, sMachIniFile)
@@ -1061,6 +1133,8 @@ Public Class CurrentMachine
       ' waterjet
       m_bWaterJet = (GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachIniFile) > 0) And
                     m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
+      ' Leggo abilitazione DB WaterJet
+      m_bFromDBWaterJet = (GetPrivateProfileInt(S_MATERIALS, K_FROMDBWATERJET, 0, sMachIniFile) > 0)
       ' Leggo abilitazione visualizzazione TcPos, Head/exit e Note utente
       m_nShowToolChanger = GetPrivateProfileInt(S_TOOLS, K_SHOWTOOLCHANGER, 0, sMachIniFile)
       m_bShowHeadExit = (GetPrivateProfileInt(S_TOOLS, K_SHOWHEADEXIT, 0, sMachIniFile) > 0)
@@ -1136,6 +1210,8 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRIPDRILLING, Nothing, m_sCurrDripDrilling, sMachIniFile)
       ' waterjetting
       GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, Nothing, m_sCurrWaterJetting, sMachIniFile)
+      ' waterjettingquality
+      GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, Nothing, m_sCurrWaterJettingQuality, sMachIniFile)
 
       ' Leggo numero di portautensili
       m_ToolChangerNbr = GetPrivateProfileInt(S_TOOLCHANGER, K_NUMBER, 0, sMachIniFile)
@@ -1197,27 +1273,119 @@ Public Class CurrentMachine
       ' Leggo la lista dei materiali
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
-      While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
-         m_Materials.Add(Material)
-         nIndex += 1
-      End While
+
+      If m_bWaterJet And m_bFromDBWaterJet Then
+         LoadWJMaterial(True)
+      Else
+         While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
+            m_Materials.Add(Material)
+            nIndex += 1
+         End While
+      End If
+
       ' Salvo massimo indice a cui sono arrivato per usarlo quando devo aggiungere nuovi elementi alla lista
       m_MaxIdMat = nIndex - 1
 
       ' Leggo materiale correntemente attivo
-      Dim CurrMatId As Integer = GetPrivateProfileInt(S_MATERIALS, K_CURRMATERIAL, 0, sMachIniFile)
-      For Each Material In Materials
-         If Material.nId = CurrMatId Then
-            m_CurrMat = Material
-            Exit For
+      Dim sCurrMatId As String = String.Empty
+      EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
+      If bWaterJet And bFromDBWaterJet Then
+         Dim sCurrMatIds As String()
+         sCurrMatIds = sCurrMatId.Split("."c)
+         If sCurrMatIds.Length > 1 Then
+            Dim nCurrMatId As Integer
+            Dim nCurrSubMatId As Integer
+            If Not Integer.TryParse(sCurrMatIds(0), nCurrMatId) Then nCurrMatId = 0
+            If Not Integer.TryParse(sCurrMatIds(1), nCurrSubMatId) Then nCurrSubMatId = 0
+            For Each Material In Materials
+               If Material.nId = nCurrMatId AndAlso Material.SubId = nCurrSubMatId Then
+                  m_CurrMat = Material
+                  Exit For
+               End If
+            Next
          End If
-      Next
+      Else
+         Dim nCurrMatId As Integer
+         If Not Integer.TryParse(sCurrMatId, nCurrMatId) Then nCurrMatId = 0
+         For Each Material In Materials
+            If Material.nId = nCurrMatId Then
+               m_CurrMat = Material
+               Exit For
+            End If
+         Next
+      End If
       ' leggo se la macchina ha il tastatore dello spessore tavola
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
+      Dim TempCurrMat As Material = CurrMat
+      ' Svuoto l'attuale lista di materiali
+      m_Materials.Clear()
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
+      ' definisco la lista delle qualità (solo se è vuota)
+      If m_Qualities.Count < 1 Then
+         m_Qualities.Add("Q1")
+         m_Qualities.Add("Q2")
+         m_Qualities.Add("Q3")
+         m_Qualities.Add("Q4")
+         m_Qualities.Add("Q5")
+         m_Qualities.Add("QExtra")
+      End If
+      ' inserisco il materiale generico di default -- IN SOSPESO
+      'm_Materials.Add(New Material(0, "***", 0))
+      ' costruiscoi la lista 
+      Dim i As Integer = 0
+      Dim sName As String = String.Empty
+      For i = 0 To Local_MaterialList.Count - 1
+         sName = Local_MaterialList(i).Name
+         Dim j As Integer = 0
+         For j = 0 To Local_MaterialList(i).SubMaterialList.Count - 1
+            m_Materials.Add(New Material(i + 1, sName & "." & Local_MaterialList(i).SubMaterialList(j).Name, j + 1))
+         Next
+      Next
+      If Not bIsStart Then CurrMat = TempCurrMat
+   End Sub
+
+   Public Function GetMaxThicknessCurrMaterial(sCurMat As String) As Double
+      Dim bFound As Boolean = False
+      Dim dMaxThick As Double = 0
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
+      Dim sItems() As String = sCurMat.Split("."c)
+      If sItems.Count > 1 Then
+         Dim sMat As String = sItems(0)
+         Dim sSubMat As String = sItems(1)
+         For Each ItemMat As EgtWPFLib5.WjMaterial In Local_MaterialList
+            If ItemMat.Name = sMat Then
+               For Each ItemSubMat As EgtWPFLib5.WjSubMaterial In ItemMat.SubMaterialList
+                  If ItemSubMat.Name = sSubMat Then
+                     For Each ItemParam As EgtWPFLib5.WjParam In ItemSubMat.ParamList
+                        Dim dParamThick As Double
+                        StringToDouble(ItemParam.Thickness, dParamThick)
+                        If dParamThick > dMaxThick Then
+                           dMaxThick = dParamThick
+                        End If
+                     Next
+                     bFound = True
+                     Exit For
+                  End If
+                  If bFound Then Exit For
+               Next
+            End If
+            If bFound Then Exit For
+         Next
+      End If
+      Return dMaxThick
+   End Function
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)
@@ -1312,6 +1480,7 @@ Friend Class Material
 
    Private m_nId As Integer
    Private m_sName As String
+   Private m_SubId As Integer = 0
 
    Public ReadOnly Property nId As Integer
       Get
@@ -1328,6 +1497,15 @@ Friend Class Material
       End Set
    End Property
 
+   Public Property SubId As Integer
+      Get
+         Return m_SubId
+      End Get
+      Set(value As Integer)
+         m_SubId = value
+      End Set
+   End Property
+
    Sub New(sName As String, MaterialList As ObservableCollection(Of Material))
       Dim nMaxId As Integer = 0
       For Each Material As Material In MaterialList
@@ -1344,4 +1522,11 @@ Friend Class Material
       m_sName = sName
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_sName = sName
+      m_SubId = nSubId
+   End Sub
+
 End Class
+

Machine/ImportExportMachiningWindowWD.xaml

@@ -0,0 +1,139 @@
+<Window  x:Class="ImportExportMachiningWindowWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+            
+            <ScrollViewer Grid.Row="0"  Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningFamily}" ItemsSource="{Binding MachiningList}">
+            
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+            
+                            </Grid>
+            
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                           <MultiTrigger.Conditions>
+                                              <Condition Property="IsSelected" Value="true"/>
+                                              <Condition Property="IsSelectionActive" Value="false"/>
+                                           </MultiTrigger.Conditions>
+                                           <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                           <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                        </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+            
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                                       RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"   />
+            
+                            </Grid>
+                        </DataTemplate>
+            
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+            
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+            
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            Command="{Binding OkCommand}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+    </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportMachiningWindowWD.xaml.vb

@@ -0,0 +1,33 @@
+Imports EgtWPFLib5
+Public Class ImportExportMachiningWindowWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportMachiningWindowVM As ImportExportMachiningWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportMachiningWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportMachiningWindowVM = ImportExportToolWindowVM
+   End Sub
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/ImportExportToolWD.xaml

@@ -0,0 +1,138 @@
+<Window x:Class="ImportExportToolWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+
+            <ScrollViewer Grid.Row="0" Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolFamily}" ItemsSource="{Binding ToolList}">
+
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+
+                            </Grid>
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                       <MultiTrigger.Conditions>
+                                          <Condition Property="IsSelected" Value="true"/>
+                                          <Condition Property="IsSelectionActive" Value="false"/>
+                                       </MultiTrigger.Conditions>
+                                       <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                       <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                    </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                          RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"  />
+
+                            </Grid>
+                        </DataTemplate>
+
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        Command="{Binding OkCommand}">
+                <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+                
+        </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportToolWD.xaml.vb

@@ -0,0 +1,38 @@
+Imports EgtWPFLib5
+Public Class ImportExportToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportToolWindowVM As ImportExportToolWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportToolWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportToolWindowVM = ImportExportToolWindowVM
+   End Sub
+
+   'Private Sub CloseWindow(bDialogResult As Boolean) Handles m_ImportExportToolWindowVM.m_CloseWindow
+   '   Me.DialogResult = bDialogResult
+   'End Sub
+
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/MachineCNPageUC.xaml.vb

@@ -56,6 +56,12 @@ Public Class MachineCNPageUC
       m_ButtonPower.Clear()
       Dim m_nCount As Integer = 1
       Dim bFoundBtn As Boolean = True
+      Dim sTestVal As String = String.Empty
+      ' se non trovo il primo pulsante della lista allora nascondo l'elenco dei pulasnti per accensione
+      If GetPrivateProfileString("MachineButtons", K_BUTTON & "1", "", sTestVal, m_MainWindow.GetMachIniFile()) = 0 Then
+         PowerGpBx.Visibility = Visibility.Collapsed
+         Return
+      End If
       While bFoundBtn
          Dim sNameBtn As String = K_BUTTON & (m_nCount).ToString()
          Dim sMachineButtonType As String = String.Empty
@@ -267,8 +273,8 @@ Public Class MachineCNPageUC
          End If
       Next
       If Not IsNothing(PowerOFFButton) Then
-         PowerOFFButton.SetIsChecked(Not bPowerOFF)
-         PowerOFFBtn.IsChecked = Not bPowerOFF
+         PowerOFFButton.SetIsChecked(bPowerOFF)
+         PowerOFFBtn.IsChecked = bPowerOFF
       End If
    End Sub
 

Machine/MachinePageUC.xaml

@@ -24,17 +24,33 @@
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ToolsDBBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="TestingPageBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="StatisticsBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ToolsDBBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DB-lavorazioniImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DB-utensiliImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="WaterJetBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource WaterJetImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="TestingPageBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource MacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="StatisticsBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowToggleButton}">
+                    
+                </ToggleButton>
 
             </Grid>
 

Machine/MachinePageUC.xaml.vb

@@ -10,6 +10,7 @@ Public Class MachinePageUC
    Friend m_ToolsDbPageUC As ToolsDbPageUC
    Friend m_MachiningDbPageUC As MachiningDbPageUC
    Friend m_PolishingsPageUC As PolishingsPageUC
+   Friend m_WaterJetPageUC As WaterJetPageUC
    Friend m_MachineCNPageUC As MachineCNPageUC
    Friend m_StatisticsPageUC As StatisticsPageUC
 
@@ -21,6 +22,7 @@ Public Class MachinePageUC
       ToolsDb
       MachiningDb
       Polishings
+      WaterJet
       MachineCN
       Statistics
    End Enum
@@ -32,6 +34,7 @@ Public Class MachinePageUC
       m_ToolsDbPageUC = New ToolsDbPageUC
       m_MachiningDbPageUC = New MachiningDbPageUC
       m_PolishingsPageUC = New PolishingsPageUC
+      m_WaterJetPageUC = New WaterJetPageUC
       m_MachineCNPageUC = New MachineCNPageUC
       m_StatisticsPageUC = New StatisticsPageUC
 
@@ -40,14 +43,16 @@ Public Class MachinePageUC
       m_ToolsDbPageUC.SetValue(Grid.RowProperty, 1)
       m_MachiningDbPageUC.SetValue(Grid.RowProperty, 1)
       m_PolishingsPageUC.SetValue(Grid.RowProperty, 1)
+      m_WaterJetPageUC.SetValue(Grid.RowProperty, 1)
       m_MachineCNPageUC.SetValue(Grid.RowProperty, 1)
       m_StatisticsPageUC.SetValue(Grid.RowProperty, 1)
 
-      AlarmsBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 5)
-      ToolsDBBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 6)
-      MachiningDBBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 7)
+      AlarmsBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 5)
+      ToolsDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 6)
+      MachiningDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 7)
       PolishingsBtn.Content = EgtMsg(91090)
-      TestingPageBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 8)
+      WaterJetBtn.Content = EgtMsg(91128)
+      TestingPageBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 8)
       StatisticsBtn.Content = EgtMsg(90709)
 
       ' Apro pagina dati macchina
@@ -55,10 +60,14 @@ Public Class MachinePageUC
       m_ActiveMachinePage = MachinePages.Alarms
 
       ' Se lucidature non abilitate, disattivo la pagina DB lucidature
-      If Not m_MainWindow.m_CurrentMachine.bPolishing  Then
+      If Not m_MainWindow.m_CurrentMachine.bPolishing Then
          PolishingsBtn.IsEnabled = False
       End If
 
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Or Not m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         WaterJetBtn.IsEnabled = False
+      End If
+
       ' Se controllo numerico 0, disattivo la pagina macchina
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          TestingPageBtn.IsEnabled = False
@@ -134,6 +143,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               AlarmsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -188,6 +213,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_ToolsDbPageUC)
             m_ActiveMachinePage = MachinePages.ToolsDb
+         Case MachinePages.WaterJet
+            'Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               ToolsDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            ToolsDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_ToolsDbPageUC)
+            m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.MachineCN
             ToolsDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -242,6 +283,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
             m_ActiveMachinePage = MachinePages.MachiningDb
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               MachiningDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            MachiningDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -299,6 +356,22 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.Polishings
             PolishingsBtn.IsChecked = True
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               PolishingsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            PolishingsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_PolishingsPageUC)
+            m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.MachineCN
             PolishingsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -314,6 +387,77 @@ Public Class MachinePageUC
       End Select
    End Sub
 
+   Private Sub WaterJetBtn_Click(sender As Object, e As RoutedEventArgs) Handles WaterJetBtn.Click
+      Select Case m_ActiveMachinePage
+         Case MachinePages.Alarms
+            AlarmsBtn.IsChecked = False
+            WaterJetBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_AlarmsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+            'DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM).RefreshDImensionPage()
+         Case MachinePages.ToolsDb
+            ' Verifica ed eventuale salvataggio utensile corrente
+            If Not m_ToolsDbPageUC.SaveCurrTool() Then
+               PolishingsBtn.IsChecked = False
+               ToolsDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB utensili
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtTdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            ToolsDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_ToolsDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.MachiningDb
+            ' Verifica ed eventuale salvataggio lavorazione corrente
+            If Not m_MachiningDbPageUC.SaveCurrMachining() Then
+               WaterJetBtn.IsChecked = False
+               MachiningDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB lavorazioni
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtMdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            MachiningDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachiningDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Polishings
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            If Not m_PolishingsPageUC.SaveKit() Then
+               WaterJetBtn.IsChecked = False
+               PolishingsBtn.IsChecked = True
+               Return
+            End If
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            PolishingsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_PolishingsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.WaterJet
+            WaterJetBtn.IsChecked = True
+         Case MachinePages.MachineCN
+            WaterJetBtn.IsChecked = True
+            TestingPageBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Statistics
+            WaterJetBtn.IsChecked = True
+            StatisticsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_StatisticsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+      End Select
+   End Sub
+
    Private Sub TestingPageBtn_Checked(sender As Object, e As RoutedEventArgs) Handles TestingPageBtn.Checked
       Select Case m_ActiveMachinePage
          Case MachinePages.Alarms
@@ -367,6 +511,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachineCNPageUC)
             m_ActiveMachinePage = MachinePages.MachineCN
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               TestingPageBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachineCNPageUC)
+            m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.MachineCN
             TestingPageBtn.IsChecked = True
          Case MachinePages.Statistics
@@ -431,6 +591,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_StatisticsPageUC)
             m_ActiveMachinePage = MachinePages.Statistics
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               StatisticsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_StatisticsPageUC)
+            m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.MachineCN
             StatisticsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -467,6 +643,19 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            'If Not m_PolishingsPageUC.SaveKit() Then
+            '   AlarmsBtn.IsChecked = False
+            '   PolishingsBtn.IsChecked = True
+            '   Return
+            'End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False

Machine/MachineStatusUC.xaml

@@ -146,7 +146,7 @@
 
          </Grid>
 
-         <Grid>
+         <Grid Name="B">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="2"/>
                <ColumnDefinition Width="1*"/>
@@ -423,8 +423,8 @@
 
                   <TextBlock Grid.Column="0" Name="ConsumptionNameTxBx" Text="A"
             Style="{StaticResource OmagCut_LowerBarTitleTextBlock}"/>
-                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25"
-            Style="{StaticResource OmagCut_LowerBarValueTextBlock}"/>
+                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25.00"
+            Style="{StaticResource OmagCut_LowerBarValueTextBlock}" FontSize="22"/>
 
                </Grid>
 

Machine/MachineStatusUC.xaml.vb

@@ -118,12 +118,18 @@ Public Class MachineStatusUC
             If Index < m_AxesNumber Then
                HorizontalGrid.Visibility = Windows.Visibility.Visible
             End If
+            If HorizontalGrid.Name = "B" And m_AxesNumber = 4 Then
+               ' se macchina a 4 assi allora nascondo le info dell'asse B
+               HorizontalGrid.Visibility = Windows.Visibility.Collapsed
+               Continue For
+            End If
             Dim BorderRow As New RowDefinition
             BorderRow.Height = New GridLength(2, GridUnitType.Pixel)
             HorizontalGrid.RowDefinitions.Add(BorderRow)
             Dim AxisGrid As New RowDefinition
             AxisGrid.Height = New GridLength(1, GridUnitType.Star)
             HorizontalGrid.RowDefinitions.Add(AxisGrid)
+
             For Each Children As UIElement In HorizontalGrid.Children
                If TypeOf Children Is System.Windows.Controls.Primitives.UniformGrid Then
                   Dim AxisUniformGrid As System.Windows.Controls.Primitives.UniformGrid = DirectCast(Children, System.Windows.Controls.Primitives.UniformGrid)

Machine/MachiningDbPageUC.xaml

@@ -392,7 +392,7 @@
 
             </Border>
 
-            <Border Name="CurveBrd" Grid.Column="0" Grid.Row="18" Grid.ColumnSpan="4" Grid.RowSpan="3"
+            <Border Name="CurveBrd" Grid.Column="0" Grid.Row="15" Grid.ColumnSpan="4" Grid.RowSpan="3"
                Style="{DynamicResource OmagCut_NoNameGroupBorder}">
 
                <Grid>
@@ -931,14 +931,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
                 <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
-
+                <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
+                <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
             </Grid>
 
       </Grid>

Machine/MachiningDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports System.ComponentModel
 Imports OmagCUT.TreeViewItem
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class MachiningDbPageUC
 
@@ -78,6 +79,8 @@ Public Class MachiningDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 16)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = "Export"
+      ImportBtn.Content = "Import"
 
       NameTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 1)
       DepthTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 2)
@@ -321,6 +324,193 @@ Public Class MachiningDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista lavorazioni per esportazione
+      Dim MachiningToExportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      Dim Family As CathegoryItem
+      Dim Machining As CustomItem
+      For Each Family In MachiningsList
+         Dim ImpExpMachiningFamily As New ImpExpMachiningFamily(Family.Name, Family.nTType)
+         For Each Machining In Family.Items
+            ImpExpMachiningFamily.MachiningList.Add(New ImpExpMachiningItem(Machining.Name, False))
+         Next
+         MachiningToExportList.Add(ImpExpMachiningFamily)
+      Next
+      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList, true)
+      Dim ExportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImoportBtn_Click() Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Machinings (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileMachiningNameList As String() = Nothing
+      Dim ImportFileMachiningFamilyList As Integer() = Nothing
+      If Not EgtMdbToBeImported(ImportFilePath, ImportFileMachiningNameList, ImportFileMachiningFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim MachinigToImportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For MachiningIndex As Integer = 0 To ImportFileMachiningNameList.Count - 1
+         Dim MachiningName As String = ImportFileMachiningNameList(MachiningIndex)
+         Dim MachiningFamily As Integer = ImportFileMachiningFamilyList(MachiningIndex)
+         MachiningFamily = MachiningFamily And
+            (MCH_MY.DRILLING Or
+            MCH_MY.SAWING Or
+            MCH_MY.MILLING Or
+            MCH_MY.POCKETING Or
+            MCH_MY.MORTISING Or
+            MCH_MY.SAWROUGHING Or
+            MCH_MY.SAWFINISHING Or
+            MCH_MY.GENMACHINING Or
+            MCH_MY.CHISELING Or
+            MCH_MY.SURFROUGHING Or
+            MCH_MY.SURFFINISHING Or
+            MCH_MY.WATERJETTING)
+         Dim bFounded As Boolean = False
+         Dim MachinigToImportFamily As ImpExpMachiningFamily
+         For Each MachinigToImportFamily In MachinigToImportList
+            If (MachiningFamily = MachinigToImportFamily.FamilyType) Then
+               MachinigToImportFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpMachiningFamily(GetMachiningFamilyName(MachiningFamily), MachiningFamily)
+            NewFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+            MachinigToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, False, ImportFilePath, ImportFileMachiningNameList)
+      Dim ImportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineMachinings(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(MachiningName As String) As Boolean
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         Dim MachiningItem As CustomItem
+         For Each MachiningItem In MachiningFamily.Items
+            If MachiningName = MachiningItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetMachiningFamilyName(NewMachinigFamily As Integer) As String
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         If NewMachinigFamily = MachiningFamily.nTType Then
+            Return MachiningFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineMachinings(vsImportedMachinings As String())
+      ' Leggo tutte le lavorazioni presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveMachiningsFamilies() As MachiningsType = MyReadMachiningFamilies(m_MainWindow.m_CurrentMachine.sMachIniFile)
+      Dim MachiningsFamilyIndex As Integer = 0
+      Dim MachiningsFamilyItem As MachiningsType
+      For Each MachiningsFamilyItem In ActiveMachiningsFamilies
+         Dim FamilyTreeView As New CathegoryItem(MachiningsFamilyItem.Name, MachiningsFamilyItem.Id)
+         Dim MachiningFamilyItem = MachiningsList.FirstOrDefault(Function(MachiningFamily) MachiningsFamilyItem.Id = MachiningFamily.nTType)
+         If IsNothing(MachiningFamilyItem) Then
+            MachiningsList.Insert(MachiningsFamilyIndex, FamilyTreeView)
+         End If
+         Dim nType As Integer = 0
+         Dim MachiningName As String = String.Empty
+         Dim MachiningIndex As Integer = 0
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         Dim bFound As Boolean = EgtMdbGetFirstMachining(MachiningsFamilyItem.Id, MachiningName)
+         While bFound
+            Dim MachiningItem = MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName)
+            Dim bInList As Boolean = vsImportedMachinings.Contains(MachiningName)
+            If bInList Then
+               ' Se una lavorazione è presente nella MachiningsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stata sovrascritta perciò la rimuovo
+               MachiningsList(MachiningsFamilyIndex).Items.Remove(MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName))
+            End If
+            If bInList OrElse IsNothing(MachiningItem) Then
+               ' recupero tuuid
+               EgtMdbSetCurrMachining(MachiningName)
+               Dim sCurrMachTUUID As String = String.Empty
+               EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sCurrMachTUUID)
+               ' aggiungo la lavorazione importata
+               MachiningsList(MachiningsFamilyIndex).Items.Insert(MachiningIndex, New CustomItem(MachiningName, MachiningsFamilyItem.Id, ToolDbUtility.IsToolInDb(sCurrMachTUUID)))
+               ' eventualmente evidezio l'ultimo elemento inserito (ERRORE: non espando l'albero)
+               'MachiningsList(MachiningsFamilyIndex).Items(MachiningIndex).IsSelected = True
+            End If
+            MachiningIndex += 1
+            bFound = EgtMdbGetNextMachining(MachiningsFamilyItem.Id, MachiningName)
+         End While
+         MachiningsFamilyIndex += 1
+      Next
+   End Sub
+
+   Public Function MyReadMachiningFamilies(sMachineIniPath As String) As MachiningsType()
+      Dim ActiveMachiningsFamiliesList As New List(Of MachiningsType)
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Foratura e Taglio di lama nelle famiglie di lavorazioni attive è invertito 
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWING, .Name = EgtMsg(31200 + 2)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_DRILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.DRILLING, .Name = EgtMsg(31200 + 1)})
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MILLING, .Name = EgtMsg(31200 + 3)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_POCKETING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.POCKETING, .Name = EgtMsg(31200 + 4)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MORTISING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MORTISING, .Name = EgtMsg(31200 + 5)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWROUGHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWROUGHING, .Name = EgtMsg(31200 + 6)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWFINISHING, .Name = EgtMsg(31200 + 7)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_GENMACHINING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.GENMACHINING, .Name = EgtMsg(31200 + 8)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_CHISELING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.CHISELING, .Name = EgtMsg(31200 + 9)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SURFFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SURFFINISHING, .Name = EgtMsg(31211)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_WATERJETTING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.WATERJETTING, .Name = EgtMsg(31210)})
+      End If
+      Return ActiveMachiningsFamiliesList.ToArray
+   End Function
+
    Private Sub InitializeMachiningFamily(bEnabled As Boolean, nFType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
@@ -362,12 +552,15 @@ Public Class MachiningDbPageUC
       HeadSideCmBx.SelectedIndex = ToolInt - 1
       EgtMdbGetCurrMachiningParam(MCH_MP.LEADINTYPE, ToolInt)
       If LeadInTypeCmBx.Items.Count > 0 Then
-         LeadInTypeCmBx.SelectedItem =  LeadInTypeCmBx.Items(0)
+         LeadInTypeCmBx.SelectedItem = LeadInTypeCmBx.Items(0)
       Else
          LeadInTypeCmBx.SelectedItem = Nothing
       End If
       For Each LInType As IdNameStruct In LeadInTypeCmBx.Items
-         If ToolInt = LInType.Id Then LeadInTypeCmBx.SelectedItem = LInType
+         If ToolInt = LInType.Id Then
+            LeadInTypeCmBx.SelectedItem = LInType
+            Exit For
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.EXTLINKTYPE, ToolInt)
       ExtLinkTypeCmBx.SelectedIndex = ToolInt
@@ -515,7 +708,11 @@ Public Class MachiningDbPageUC
       ' Lista materiali
       m_MaterialsList.Clear()
       For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
-         m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
+         Else
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, ToolString)
       If ToolString <> String.Empty Then
@@ -523,14 +720,30 @@ Public Class MachiningDbPageUC
          Dim Index As Integer = 0
          For Each Material As MachiningMaterial In m_MaterialsList
             Dim Param() As String = sItems(Index).Split(",".ToCharArray)
+            Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
-            If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
-               StringToDouble(Param(1), Material.dMinThickness)
-               StringToDouble(Param(2), Material.dMaxThickness)
-               Material.VerifyIfActive()
-               Index += 1
+            Dim nSubParId As Integer = 0
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+               If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
+                  StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             Else
-               Material.VerifyIfActive()
+               If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             End If
          Next
       End If
@@ -609,13 +822,13 @@ Public Class MachiningDbPageUC
       ' Parmetri nascosti di svuotatura
       If nMachiningType = MCH_MY.POCKETING Then
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
-         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         ' EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
          Dim dToolDiam As Double = 100
          If Not IsNothing(ToolCmBx.SelectedItem) Then
             EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
             EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
          End If
-         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam(MCH_MP.LITANG, 0.99 * dToolDiam)
          EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
       End If
       ' Parametri WaterJetting
@@ -684,8 +897,14 @@ Public Class MachiningDbPageUC
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
       For Each Material As MachiningMaterial In m_MaterialsList
-         If Material.bIsActive Then
-            sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+            End If
+         Else
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+            End If
          End If
       Next
       EgtMdbSetCurrMachiningParam(MCH_MP.SYSNOTES, sMaterialString)
@@ -705,8 +924,9 @@ Public Class MachiningDbPageUC
       LonOffsetTxBx.Visibility = Windows.Visibility.Visible
       Select Case nMachiningType
          Case MCH_MY.SAWING   'Parametri Taglio
-            SideAngleTxBl.Visibility = Windows.Visibility.Visible
-            SideAngleTxBx.Visibility = Windows.Visibility.Visible
+            ' nascondo il parametro di sbandamento 
+            SideAngleTxBl.Visibility = Windows.Visibility.Hidden
+            SideAngleTxBx.Visibility = Windows.Visibility.Hidden
             InvertTxBl.Visibility = Windows.Visibility.Visible
             InvertChBx.Visibility = Windows.Visibility.Visible
             AcrossTxBl.Visibility = Windows.Visibility.Hidden
@@ -723,40 +943,58 @@ Public Class MachiningDbPageUC
             TypeBrd.Visibility = Windows.Visibility.Visible
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
-            If RowNum > 2 Then
-               For Index As Integer = RowNum - 1 To 2 Step -1
+            If RowNum > 1 Then
+               For Index As Integer = RowNum - 1 To 1 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+
+               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 0)
                LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 0)
                LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
                TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+               TypeBrd.SetValue(Grid.RowSpanProperty, 3)
             End If
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
-            ExtLinkTypeTxBl.Visibility = Windows.Visibility.Visible
-            ExtLinkTypeCmBx.Visibility = Windows.Visibility.Visible
+
             LeadOutTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadOutTypeCmBx.Visibility = Windows.Visibility.Visible
+
+            ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
+            ExtLinkTypeCmBx.Visibility = Windows.Visibility.Hidden
             LeadLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
             LeadLinkTypeCmBx.Visibility = Windows.Visibility.Hidden
-            CurveBrd.Visibility = Windows.Visibility.Hidden
-            If MachParamGrd.Children.Contains(StartPosTxBl) Then
-               MachParamGrd.Children.Remove(StartPosTxBl)
-               MachParamGrd.Children.Remove(StartPosTxBx)
-               TypeGrd.Children.Add(StartPosTxBl)
-               TypeGrd.Children.Add(StartPosTxBx)
-               StartPosTxBl.SetValue(Grid.ColumnProperty, 0)
-               StartPosTxBl.SetValue(Grid.RowProperty, 0)
-               StartPosTxBx.SetValue(Grid.ColumnProperty, 1)
-               StartPosTxBx.SetValue(Grid.RowProperty, 0)
-               StartPosTxBl.SetValue(Grid.RowSpanProperty, 1)
-               StartPosTxBx.SetValue(Grid.RowSpanProperty, 1)
+
+            CurveBrd.Visibility = Windows.Visibility.Visible
+
+            'If Not MachParamGrd.Children.Contains(StartPosTxBl) Then
+            If TypeGrd.Children.Contains(StartPosTxBl) Then
+               'MachParamGrd.Children.Remove(StartPosTxBl)
+               'MachParamGrd.Children.Remove(StartPosTxBx)
+               'TypeGrd.Children.Add(StartPosTxBl)
+               'TypeGrd.Children.Add(StartPosTxBx
+               TypeGrd.Children.Remove(StartPosTxBl)
+               TypeGrd.Children.Remove(StartPosTxBx)
+               MachParamGrd.Children.Add(StartPosTxBl)
+               MachParamGrd.Children.Add(StartPosTxBx)
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 2)
+               StartPosTxBl.SetValue(Grid.RowProperty, 3)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowProperty, 3)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.Style = Application.Current.FindResource("OmagCut_MachLeftCalculatorTextBoxInBorder")
+            ElseIf MachParamGrd.Children.Contains(StartPosTxBl) Then
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 2)
+               StartPosTxBl.SetValue(Grid.RowProperty, 3)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowProperty, 3)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
             End If
             StartPosTxBl.Visibility = Windows.Visibility.Visible
             StartPosTxBx.Visibility = Windows.Visibility.Visible
@@ -903,18 +1141,26 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
+               ' elimino eventuali righe in eccesso
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -1079,6 +1325,14 @@ Public Class MachiningDbPageUC
                StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.Style = Application.Current.FindResource("OmagCut_LeftCalculatorTextBoxNoBorder")
+            ElseIf MachParamGrd.Children.Contains(StartPosTxBl) Then
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 0)
+               StartPosTxBl.SetValue(Grid.RowProperty, 6)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 1)
+               StartPosTxBx.SetValue(Grid.RowProperty, 6)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.Style = Application.Current.FindResource("OmagCut_LeftCalculatorTextBoxNoBorder")
             End If
             StartPosTxBl.Visibility = Windows.Visibility.Visible
             StartPosTxBx.Visibility = Windows.Visibility.Visible
@@ -1524,7 +1778,7 @@ Public Class MachiningDbPageUC
             StepTypeTxBl.Visibility = Windows.Visibility.Hidden
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
-            SideBrd.Visibility = Windows.Visibility.Visible
+            SideBrd.Visibility = Windows.Visibility.Hidden
             WorkSideTxBl.Visibility = Windows.Visibility.Hidden
             WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
@@ -1536,15 +1790,22 @@ Public Class MachiningDbPageUC
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -2029,6 +2290,16 @@ Public Class MachiningDbPageUC
 
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
+      Dim dMaxThick As Double = 0
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         ' solo per water jet controllo lo spessore massimo ammissibile
+         dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
+         Dim dVal As Double
+         StringToLen(MaxThicknessTxBx.Text, dVal)
+         If dVal > dMaxThick Then
+            MaxThicknessTxBx.Text = LenToString(dMaxThick, 3)
+         End If
+      End If
       StringToLen(MaxThicknessTxBx.Text, SelectedMaterial.dMaxThickness)
       SelectedMaterial.VerifyIfActive()
    End Sub
@@ -2104,7 +2375,6 @@ Public Class MachiningDbPageUC
          Case MCH_MY.POCKETING
             LeadInTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
                                           {New IdNameStruct(MCH_POCK_LI.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                           New IdNameStruct(MCH_POCK_LI.GLIDE, EgtMsg(MSG_COMBOBOXPARAM + 48)),
                                            New IdNameStruct(MCH_POCK_LI.ZIGZAG, EgtMsg(MSG_COMBOBOXPARAM + 38)),
                                            New IdNameStruct(MCH_POCK_LI.HELIX, EgtMsg(MSG_COMBOBOXPARAM + 49))})
             LeadOutTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
@@ -2176,6 +2446,7 @@ Class MachiningMaterial
    Implements INotifyPropertyChanged
 
    Private m_nId As Integer
+   Private m_nSubId As Integer
    Private m_sName As String
    Private m_dMinThickness As Double
    Private m_dMaxThickness As Double
@@ -2187,6 +2458,12 @@ Class MachiningMaterial
       End Get
    End Property
 
+   Public ReadOnly Property nSubId As Integer
+      Get
+         Return m_nSubId
+      End Get
+   End Property
+
    Public ReadOnly Property Name As String
       Get
          Return m_sName
@@ -2225,6 +2502,15 @@ Class MachiningMaterial
       m_bIsActive = False
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_nSubId = nSubId
+      m_sName = sName
+      m_dMinThickness = 0
+      m_dMaxThickness = 0
+      m_bIsActive = False
+   End Sub
+
    Public Sub VerifyIfActive()
       Dim bIsActive As Boolean = ( m_dMaxThickness > m_dMinThickness + EPS_SMALL)
       If bIsActive <> m_bIsActive Then

Machine/PolishingsPageUC.xaml

@@ -158,6 +158,9 @@
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                
                             </Grid.ColumnDefinitions>
                             <Grid.RowDefinitions>
                                 <RowDefinition Height="0.5*"/>
@@ -165,10 +168,12 @@
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
                                 <RowDefinition Height="0.5*"/>
 
                             </Grid.RowDefinitions>
 
+                    <!--Decrizione immagini-->        
                     <Border Grid.Row="1" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/Contour.png" Stretch="Uniform"/>
                     </Border>
@@ -178,24 +183,45 @@
                     <Border Grid.Row="3" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/ZigZagY.png" Stretch="Uniform"/>
                     </Border>
+                    <Border Grid.Row="4" Grid.Column="1" Margin="10">
+                        <Image Source="../Resources/Spiral.png" Stretch="Uniform"/>
+                    </Border>
 
-                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
+                            <!--Titolazione colonne-->
+                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RadiusTxBl" Grid.Row="0" Grid.Column="5" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="DistanceTxBl" Grid.Row="0" Grid.Column="6" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
 
-                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Contornatura-->
+                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             
-                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-
-                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Cammino orizzontale X-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusXTxBx" Grid.Row="2" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceXTxBx" Grid.Row="2" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
                             
-                    <GroupBox Name="LiLoGpBx" Grid.Row="4" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="3" Style="{DynamicResource OmagCut_GroupBox}">
+                    <!--Cammino verticale Y-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusYTxBx" Grid.Row="3" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceYTxBx" Grid.Row="3" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                            
+                    <!--Cammino a spirale-->
+                    <EgtWPFLib:EgtTextBox Name="SpiralTxBx" Grid.Row="4" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepSpiralTxBx" Grid.Row="4" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffSpiralTxBx" Grid.Row="4" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusSpiralTxBx" Grid.Row="4" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceSpiralTxBx" Grid.Row="4" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+
+                            <!--Parametri di lavoro condivisi-->
+                    <GroupBox Name="LiLoGpBx" Grid.Row="5" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="5" Style="{DynamicResource OmagCut_GroupBox}">
                         <Grid Name="LiLoGrd">
                             <Grid.ColumnDefinitions>
                                 <ColumnDefinition Width="2*"/>
@@ -212,11 +238,11 @@
                            </Grid.RowDefinitions>
 
                             <TextBlock Name="LiLenTxBl" Grid.Row="1" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiHeightTxBl" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiLoadTxBl" Grid.Row="3" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
 
                         </Grid>
                     </GroupBox>

Machine/PolishingsPageUC.xaml.vb

@@ -61,6 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
+      RadiusTxBl.Text = "Raggio"
+      DistanceTxBl.Text = "Distanza"
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza
@@ -452,7 +454,9 @@ Public Class PolishingsPageUC
                   If KitMachItem.m_IsModifiedId OrElse KitMachItem.m_IsModifiedToolUUID OrElse KitMachItem.m_IsModifiedToolName OrElse KitMachItem.m_IsModifiedSelTool OrElse
                      KitMachItem.m_IsModifiedActive OrElse KitMachItem.m_IsModifiedContour OrElse KitMachItem.m_IsModifiedOffCnt OrElse KitMachItem.m_IsModifiedZigZagX OrElse
                      KitMachItem.m_IsModifiedOffZigZagX OrElse KitMachItem.m_IsModifiedZigZagY OrElse KitMachItem.m_IsModifiedStepX OrElse KitMachItem.m_IsModifiedStepY OrElse
-                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse KitMachItem.m_IsModifiedLiLoad Then
+                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedSpiral OrElse KitMachItem.m_IsModifiedOffSpiral OrElse KitMachItem.m_IsModifiedStepSpiral OrElse
+                     KitMachItem.m_IsModifiedRadiusSpiral OrElse KitMachItem.m_IsModifiedDistanceSpiral OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse
+                     KitMachItem.m_IsModifiedLiLoad Then
                      Return True
                   End If
                Next
@@ -476,10 +480,19 @@ Public Class PolishingsPageUC
             KitMachItem.m_IsModifiedOffCnt = False
             KitMachItem.m_IsModifiedZigZagX = False
             KitMachItem.m_IsModifiedOffZigZagX = False
+            KitMachItem.m_IsModifiedRadiusX = False
+            KitMachItem.m_IsModifiedDistanceX = False
             KitMachItem.m_IsModifiedZigZagY = False
             KitMachItem.m_IsModifiedOffZigZagY = False
+            KitMachItem.m_IsModifiedRadiusY = False
+            KitMachItem.m_IsModifiedDistanceY = False
+            KitMachItem.m_IsModifiedSpiral = False
+            KitMachItem.m_IsModifiedOffSpiral = False
+            KitMachItem.m_IsModifiedRadiusSpiral = False
+            KitMachItem.m_IsModifiedDistanceSpiral = False
             KitMachItem.m_IsModifiedStepX = False
             KitMachItem.m_IsModifiedStepY = False
+            KitMachItem.m_IsModifiedStepSpiral = False
             KitMachItem.m_IsModifiedLiLen = False
             KitMachItem.m_IsModifiedLiHeight = False
             KitMachItem.m_IsModifiedLiLoad = False
@@ -493,20 +506,29 @@ Public Class PolishingsPageUC
       OffContourTxBx.Text = LenToString(kmShow.dOffsetCnt, 3)
       ZigZagXTxBx.Text = kmShow.nZigZagX.ToString()
       OffZigZagXTxBx.Text = LenToString(kmShow.dOffZigZagX, 3)
-      StepXTxBx.Text = LenToString( kmShow.dStepX, 3)
+      StepXTxBx.Text = LenToString(kmShow.dStepX, 3)
+      RadiusXTxBx.Text = LenToString(kmShow.dRadiusX, 3)
+      DistanceXTxBx.Text = LenToString(kmShow.dDistanceX, 3)
       ZigZagYTxBx.Text = kmShow.nZigZagY.ToString()
       OffZigZagYTxBx.Text = LenToString(kmShow.dOffZigZagY, 3)
-      StepYTxBx.Text = LenToString( kmShow.dStepY, 3)
-      LiLenTxBx.Text = LenToString( kmShow.dLiLen, 3)
-      LiHeightTxBx.Text = LenToString( kmShow.dLiHeight, 3)
-      LiLoadTxBx.Text = LenToString( kmShow.dLiLoad, 3)
+      StepYTxBx.Text = LenToString(kmShow.dStepY, 3)
+      RadiusYTxBx.Text = LenToString(kmShow.dRadiusY, 3)
+      DistanceYTxBx.Text = LenToString(kmShow.dDistanceY, 3)
+      SpiralTxBx.Text = kmShow.nSpiral.ToString()
+      StepSpiralTxBx.Text = LenToString(kmShow.dStepSpiral, 3)
+      OffSpiralTxBx.Text = LenToString(kmShow.dOffSpiral, 3)
+      RadiusSpiralTxBx.Text = LenToString(kmShow.dRadiusSpiral, 3)
+      DistanceSpiralTxBx.Text = LenToString(kmShow.dDistanceSpiral, 3)
+      LiLenTxBx.Text = LenToString(kmShow.dLiLen, 3)
+      LiHeightTxBx.Text = LenToString(kmShow.dLiHeight, 3)
+      LiLoadTxBx.Text = LenToString(kmShow.dLiLoad, 3)
    End Sub
 
    Private Sub KitMachsLstBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles KitMachsLstBx.SelectionChanged
       Dim SelectedKitMach As KitMach = KitMachsLstBx.SelectedItem
       If Not IsNothing(SelectedKitMach) Then
          ' visualizzo i parametri relativi al KitMach selezionato
-         ShowKitMach( SelectedKitMach)
+         ShowKitMach(SelectedKitMach)
       End If
    End Sub
 
@@ -520,14 +542,16 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffContourTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffContourTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffContourTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffsetCnt = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = nTemp
+         StringToLen(OffContourTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffsetCnt = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = dTemp
       End If
    End Sub
 
+#Region "ZigZag X"
+
    Private Sub ZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagXTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -538,11 +562,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagXTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagXTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagX = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = nTemp
+         StringToLen(OffZigZagXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = dTemp
       End If
    End Sub
 
@@ -555,6 +579,28 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusX = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceX = dTemp
+      End If
+   End Sub
+
+#End Region  ' ZigZag X
+
+#Region "ZizZag Y"
+
    Private Sub ZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagYTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -565,11 +611,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagYTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagYTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagY = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = nTemp
+         StringToLen(OffZigZagYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = dTemp
       End If
    End Sub
 
@@ -582,6 +628,75 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusY = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceY = dTemp
+      End If
+   End Sub
+
+#End Region    ' ZigZagY
+
+#Region "Spirale"
+
+   Private Sub SpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles SpiralTxBx.EgtClosed
+      Dim nTemp As Integer = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         nTemp = SpiralTxBx.Text
+         KitMachsLstBx.SelectedItem.nSpiral = nTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).nSpiral = nTemp
+      End If
+   End Sub
+
+   Private Sub OffSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(OffSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub StepSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(StepSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dStepSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dStepSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub RadiusSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceSpiral = dTemp
+      End If
+   End Sub
+
+#End Region  ' Spirale
+
    Private Sub LiLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles LiLenTxBx.EgtClosed
       Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -616,11 +731,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub ToolCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs)
-      If Not IsNothing( KitMachsLstBx.SelectedItem) Then
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
          m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).SelTool = KitMachsLstBx.SelectedItem.SelTool
-         If KitMachsLstBx.SelectedItem.SelTool >= 0 then
-            KitMachsLstBx.SelectedItem.sToolName = m_ToolList( KitMachsLstBx.SelectedItem.SelTool)
-            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList( KitMachsLstBx.SelectedItem.SelTool)
+         If KitMachsLstBx.SelectedItem.SelTool >= 0 Then
+            KitMachsLstBx.SelectedItem.sToolName = m_ToolList(KitMachsLstBx.SelectedItem.SelTool)
+            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList(KitMachsLstBx.SelectedItem.SelTool)
          Else
             KitMachsLstBx.SelectedItem.sToolName = "---"
             KitMachsLstBx.SelectedItem.sToolUUID = "---"
@@ -630,143 +745,176 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
-   Private Function ReadKitName( nKitIndex As Integer) As String
+   Private Function ReadKitName(nKitIndex As Integer) As String
       ' Leggo il nome del kit
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
       Dim sName As String = ""
-      GetPrivateProfileString( S_HEADER, sKey, "", sName, m_sKitFile)
+      GetPrivateProfileString(S_HEADER, sKey, "", sName, m_sKitFile)
       Return sName
    End Function
-   
-   Private Function ReadKit( nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
+
+   Private Function ReadKit(nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
       ' Leggo il nome del kit
-      Dim sName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sName) Then Return False
+      Dim sName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sName) Then Return False
       ' Creo il kit
-      Kit = New Kit( If( removeFlag, nKitIndex - 1, nKitIndex), sName)
+      Kit = New Kit(If(removeFlag, nKitIndex - 1, nKitIndex), sName)
       ' Leggo le sue lavorazioni
       For nkitMachIndex As Integer = 1 To 100
          Dim kmItem As KitMach = Nothing
-         if ReadKitMach( sName, nkitMachIndex, kmItem) Then
-            Kit.AddKitMach( kmItem)
+         If ReadKitMach(sName, nkitMachIndex, kmItem) Then
+            Kit.AddKitMach(kmItem)
          Else
             Exit For
          End If
       Next
       ' Se non sono state trovate lavorazioni, ne aggiungo una standard
       If Kit.KitMachList.Count() = 0 Then
-         Kit.AddKitMach( New KitMach( 1))
+         Kit.AddKitMach(New KitMach(1))
       End If
       Return True
    End Function
 
-   Private Function ReadKitMach( sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
+   Private Function ReadKitMach(sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
       ' Verifico esistenza lavorazione del kit
       Dim sSect As String = S_KIT & "." & sKitName
-      Dim sKeyInd As String = nkitMachIndex.ToString("D2") & "."
+      Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       Dim sName As String = ""
-      If GetPrivateProfileString( sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
+      If GetPrivateProfileString(sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
       ' Lettura completa
       kmItem = New KitMach
       kmItem.sToolName = sName
-      kmItem.nId = nkitMachIndex
-      GetPrivateProfileString( sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
-      kmItem.bActive = ( GetPrivateProfileInt( sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
+      kmItem.nId = nKitMachIndex
+      GetPrivateProfileString(sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
+      kmItem.bActive = (GetPrivateProfileInt(sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
       kmItem.nContour = GetPrivateProfileInt(sSect, sKeyInd & K_CONTOUR, 0, m_sKitFile)
-      kmItem.dOffsetCnt = GetPrivateProfileInt(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
+      kmItem.dOffsetCnt = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
       kmItem.nZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGX, 0, m_sKitFile)
-      kmItem.dOffZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
+      kmItem.dOffZigZagX = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
       kmItem.dStepX = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPX, 0, m_sKitFile)
+      kmItem.dRadiusX = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSX, 0, m_sKitFile)
+      kmItem.dDistanceX = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEX, 0, m_sKitFile)
       kmItem.nZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGY, 0, m_sKitFile)
-      kmItem.dOffZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
-      kmItem.dStepY = GetPrivateProfileDouble( sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
-      kmItem.dLiLen = GetPrivateProfileDouble( sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
-      kmItem.dLiHeight = GetPrivateProfileDouble( sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
-      kmItem.dLiLoad = GetPrivateProfileDouble( sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
+      kmItem.dOffZigZagY = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
+      kmItem.dStepY = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
+      kmItem.dRadiusY = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSY, 0, m_sKitFile)
+      kmItem.dDistanceY = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEY, 0, m_sKitFile)
+
+      kmItem.nSpiral = GetPrivateProfileInt(sSect, sKeyInd & K_SPIRAL, 0, m_sKitFile)
+      kmItem.dOffSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSPIRAL, 0, m_sKitFile)
+      kmItem.dStepSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPSPIRAL, 0, m_sKitFile)
+      kmItem.dRadiusSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSSPIRAL, 0, m_sKitFile)
+      kmItem.dDistanceSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCESPIRAL, 0, m_sKitFile)
+
+      kmItem.dLiLen = GetPrivateProfileDouble(sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
+      kmItem.dLiHeight = GetPrivateProfileDouble(sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
+      kmItem.dLiLoad = GetPrivateProfileDouble(sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
       Return True
    End Function
 
-   Friend Function WriteKitName( nKitIndex As Integer, sKitName As String) As Boolean
+   Friend Function WriteKitName(nKitIndex As Integer, sKitName As String) As Boolean
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
-      Return WritePrivateProfileString( S_HEADER, sKey, sKitName, m_sKitFile)
+      Return WritePrivateProfileString(S_HEADER, sKey, sKitName, m_sKitFile)
    End Function
 
-   Private Function WriteKitMach( nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
+   Private Function WriteKitMach(nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Indice
       Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       ' Scrivo i dati della lavorazione
-      If Not IsNothing( kmItem) Then
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, If( kmItem.bActive, "1", "0"), m_sKitFile)
+      If Not IsNothing(kmItem) Then
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, If(kmItem.bActive, "1", "0"), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, kmItem.nContour.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, kmItem.dOffsetCnt.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, DoubleToString(kmItem.dOffsetCnt, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, kmItem.nZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, kmItem.dOffZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, DoubleToString( kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, DoubleToString(kmItem.dOffZigZagX.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, DoubleToString(kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, DoubleToString(kmItem.dRadiusX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, DoubleToString(kmItem.dDistanceX, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, kmItem.nZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, kmItem.dOffZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, DoubleToString( kmItem.dStepY, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, DoubleToString( kmItem.dLiLen, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, DoubleToString( kmItem.dLiHeight, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, DoubleToString( kmItem.dLiLoad, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, DoubleToString(kmItem.dOffZigZagY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, DoubleToString(kmItem.dStepY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, DoubleToString(kmItem.dRadiusY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, DoubleToString(kmItem.dDistanceY, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, kmItem.nSpiral.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, DoubleToString(kmItem.dOffSpiral.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, DoubleToString(kmItem.dStepSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, DoubleToString(kmItem.dRadiusSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, DoubleToString(kmItem.dDistanceSpiral, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, DoubleToString(kmItem.dLiLen, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, DoubleToString(kmItem.dLiHeight, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, DoubleToString(kmItem.dLiLoad, 3), m_sKitFile)
       Else
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
       End If
       Return True
    End Function
 
-   Private Function EraseKit( nKitIndex As Integer) As Boolean
+   Private Function EraseKit(nKitIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dalla lista dei kit scalando tutti di una posizione e eliminando l'ultimo
       Dim nNextKitIndex As Integer = nKitIndex + 1
-      Dim sNextKitName As String = ReadKitName( nNextKitIndex) 
-      while Not String.IsNullOrWhiteSpace( sNextKitName)
-         WriteKitName( nNextKitIndex - 1, sNextKitName)
+      Dim sNextKitName As String = ReadKitName(nNextKitIndex)
+      While Not String.IsNullOrWhiteSpace(sNextKitName)
+         WriteKitName(nNextKitIndex - 1, sNextKitName)
          nNextKitIndex += 1
-         sNextKitName = ReadKitName( nNextKitIndex) 
+         sNextKitName = ReadKitName(nNextKitIndex)
       End While
-      WriteKitName( nNextKitIndex - 1, Nothing)
+      WriteKitName(nNextKitIndex - 1, Nothing)
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Cancello tutte le lavorazioni del kit
-      WritePrivateProfileString( sSect, Nothing, Nothing, m_sKitFile)
+      WritePrivateProfileString(sSect, Nothing, Nothing, m_sKitFile)
       Return True
    End Function
 
-   Private Function EraseKitMach( nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
+   Private Function EraseKitMach(nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dali KitMach scalando tutti di una posizione e eliminando l'ultimo
       Dim kmCurr As KitMach = Nothing
       Dim nNextKitMachIndex As Integer = nKitMachIndex + 1
-      While ReadKitMach( sKitName, nNextKitMachIndex, kmCurr)
+      While ReadKitMach(sKitName, nNextKitMachIndex, kmCurr)
          kmCurr.nId = nNextKitMachIndex - 1
-         WriteKitMach( nKitIndex, nNextKitMachIndex - 1, kmCurr)
+         WriteKitMach(nKitIndex, nNextKitMachIndex - 1, kmCurr)
          nNextKitMachIndex += 1
       End While
-      WriteKitMach( nKitIndex, nNextKitMachIndex - 1, Nothing)
+      WriteKitMach(nKitIndex, nNextKitMachIndex - 1, Nothing)
       Return True
    End Function
 
@@ -804,7 +952,7 @@ Class Kit
       Get
          Return m_nId
       End Get
-      Set( value As Integer) 
+      Set(value As Integer)
          m_nId = value
       End Set
    End Property
@@ -824,7 +972,7 @@ Class Kit
       End Set
    End Property
 
-   Sub New( nId As Integer, sName As String)
+   Sub New(nId As Integer, sName As String)
       m_nId = nId
       m_sName = sName
 
@@ -832,21 +980,21 @@ Class Kit
 
    End Sub
 
-   Sub New( nId As Integer, sName As String, kitSou As Kit)
+   Sub New(nId As Integer, sName As String, kitSou As Kit)
       m_nId = nId
       m_sName = sName
 
       m_KitMachList = New List(Of KitMach)
 
-      If IsNothing( kitSou) Then Return
+      If IsNothing(kitSou) Then Return
 
       For Each kmItem As KitMach In kitSou.m_KitMachList
-         AddKitMach( kmItem)
+         AddKitMach(kmItem)
       Next
 
    End Sub
 
-   Sub AddKitMach( kitMachItem As KitMach)
+   Sub AddKitMach(kitMachItem As KitMach)
       m_KitMachList.Add(kitMachItem)
    End Sub
 
@@ -862,15 +1010,29 @@ Class KitMach
    Private m_sToolName As String
    Private m_SelTool As Integer
    Friend Shared m_ToolList As List(Of String)
+
    Private m_bActive As Boolean
    Private m_nContour As Integer
    Private m_dOffsetCnt As Double
+
    Private m_nZigZagX As Integer
    Private m_dStepX As Double
    Private m_dOffZigZagX As Double
+   Private m_dRadiusX As Double
+   Private m_dDistanceX As Double
+
    Private m_nZigZagY As Integer
    Private m_dStepY As Double
    Private m_dOffZigZagY As Double
+   Private m_dRadiusY As Double
+   Private m_dDistanceY As Double
+
+   Private m_nSpiral As Integer
+   Private m_dOffSpiral As Double
+   Private m_dStepSpiral As Double
+   Private m_dRadiusSpiral As Double
+   Private m_dDistanceSpiral As Double
+
    Private m_dLiLen As Double
    Private m_dLiHeight As Double
    Private m_dLiLoad As Double
@@ -958,6 +1120,8 @@ Class KitMach
       End Set
    End Property
 
+#Region "Contorno"
+
    Public m_IsModifiedActive As Boolean = False
    Public Property bActive As Boolean
       Get
@@ -985,11 +1149,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffCnt As Boolean = False
-   Public Property dOffsetCnt As Integer
+   Public Property dOffsetCnt As Double
       Get
          Return m_dOffsetCnt
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffsetCnt Then
             m_dOffsetCnt = value
             m_IsModifiedOffCnt = True
@@ -997,6 +1161,10 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Contorno
+
+#Region "ZigZag X"
+
    Public m_IsModifiedZigZagX As Boolean = False
    Public Property nZigZagX As Integer
       Get
@@ -1011,11 +1179,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagX As Boolean = False
-   Public Property dOffZigZagX As Integer
+   Public Property dOffZigZagX As Double
       Get
          Return m_dOffZigZagX
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagX Then
             m_dOffZigZagX = value
             m_IsModifiedOffZigZagX = True
@@ -1036,6 +1204,36 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusX As Boolean = False
+   Public Property dRadiusX As Double
+      Get
+         Return m_dRadiusX
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusX Then
+            m_dRadiusX = value
+            m_IsModifiedRadiusX = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceX As Boolean = False
+   Public Property dDistanceX As Double
+      Get
+         Return m_dDistanceX
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceX Then
+            m_dDistanceX = value
+            m_IsModifiedDistanceX = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag X
+
+#Region "ZigZag Y"
+
    Public m_IsModifiedZigZagY As Boolean = False
    Public Property nZigZagY As Integer
       Get
@@ -1050,11 +1248,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagY As Boolean = False
-   Public Property dOffZigZagY As Integer
+   Public Property dOffZigZagY As Double
       Get
          Return m_dOffZigZagY
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagY Then
             m_dOffZigZagY = value
             m_IsModifiedOffZigZagY = True
@@ -1075,6 +1273,105 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusY As Boolean = False
+   Public Property dRadiusY As Double
+      Get
+         Return m_dRadiusY
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusY Then
+            m_dRadiusY = value
+            m_IsModifiedRadiusY = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceY As Boolean = False
+   Public Property dDistanceY As Double
+      Get
+         Return m_dDistanceY
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceY Then
+            m_dDistanceY = value
+            m_IsModifiedDistanceY = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag Y
+
+#Region "Spirale"
+
+   Public m_IsModifiedSpiral As Boolean = False
+   Public Property nSpiral As Integer
+      Get
+         Return m_nSpiral
+      End Get
+      Set(value As Integer)
+         If value <> m_nSpiral Then
+            m_nSpiral = value
+            m_IsModifiedSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedOffSpiral As Boolean = False
+   Public Property dOffSpiral As Double
+      Get
+         Return m_dOffSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dOffSpiral Then
+            m_dOffSpiral = value
+            m_IsModifiedOffSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedStepSpiral As Boolean = False
+   Public Property dStepSpiral As Double
+      Get
+         Return m_dStepSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dStepSpiral Then
+            m_dStepSpiral = value
+            m_IsModifiedStepSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedRadiusSpiral As Boolean = False
+   Public Property dRadiusSpiral As Double
+      Get
+         Return m_dRadiusSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusSpiral Then
+            m_dRadiusSpiral = value
+            m_IsModifiedRadiusSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceSpiral As Boolean = False
+   Public Property dDistanceSpiral As Double
+      Get
+         Return m_dDistanceSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceSpiral Then
+            m_dDistanceSpiral = value
+            m_IsModifiedDistanceSpiral = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' Spirale
+
+#Region "Parametri lavorazione"
+
    Public m_IsModifiedLiLen As Boolean = False
    Public Property dLiLen As Double
       Get
@@ -1114,6 +1411,8 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Parametri lavorazione
+
    Sub New()
       m_nId = 0
       m_SelTool = 0
@@ -1125,15 +1424,24 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( nId As Integer)
+   Sub New(nId As Integer)
       m_nId = nId
       m_SelTool = 0
       m_sToolUUID = "---"
@@ -1144,17 +1452,26 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( kmSou As KitMach) 
+   Sub New(kmSou As KitMach)
       m_nId = kmSou.nId
-      m_SelTool = kmSou.selTool
+      m_SelTool = kmSou.SelTool
       m_sToolUUID = kmSou.sToolUUID
       m_sToolName = kmSou.sToolName
       m_bActive = kmSou.bActive
@@ -1163,9 +1480,18 @@ Class KitMach
       m_nZigZagX = kmSou.nZigZagX
       m_dOffZigZagX = kmSou.dOffZigZagX
       m_dStepX = kmSou.dStepX
+      m_dRadiusX = kmSou.dRadiusX
+      m_dDistanceX = kmSou.dDistanceX
       m_nZigZagY = kmSou.nZigZagY
       m_dOffZigZagY = kmSou.dOffZigZagY
       m_dStepY = kmSou.dStepY
+      m_dRadiusY = kmSou.dRadiusY
+      m_dDistanceY = kmSou.dDistanceY
+      m_nSpiral = kmSou.nSpiral
+      m_dOffSpiral = kmSou.dOffSpiral
+      m_dStepSpiral = kmSou.dStepSpiral
+      m_dRadiusSpiral = kmSou.dRadiusSpiral
+      m_dDistanceSpiral = kmSou.dDistanceSpiral
       m_dLiLen = kmSou.dLiLen
       m_dLiHeight = kmSou.dLiHeight
       m_dLiLoad = kmSou.m_dLiLoad

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

Machine/ToolsDbPageUC.xaml

@@ -434,13 +434,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
             <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
 
             </Grid>
 

Machine/ToolsDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports OmagCUT.TreeViewItem
 Imports System.ComponentModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class ToolsDbPageUC
 
@@ -16,6 +17,8 @@ Public Class ToolsDbPageUC
    Dim ToolsList As New ObservableCollection(Of CathegoryItem)
    ' Proprietà
    Private m_bFirst As Boolean = True
+   ' Flag nuova gestione parametri lama in disegno
+   Private m_bNewSawbladeMaker As Boolean = False
    ' Stringa identificativa variabile geometrica in modifica
    Private m_sCurrVar As String = String.Empty
    ' Parametri dell'utensile corrente
@@ -53,6 +56,8 @@ Public Class ToolsDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 15)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = EgtMsg(91126)
+      ImportBtn.Content = EgtMsg(91127)
 
       NameTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 1)
       TCPosTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 2)
@@ -160,16 +165,20 @@ Public Class ToolsDbPageUC
          ToolScene.SetStatusNull()
          ' Inizializzo le famiglie di utensili nell'albero
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-         InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg( 90751))
-         InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg( 90752))
-         InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg( 90753))
-         InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg( 90754))
-         InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg( 90756))
-         InitializeToolGroup(m_CurrMachine.bWaterJet, MCH_TY.WATERJET, EgtMsg( 90755))
+         InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg(90751))
+         InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg(90752))
+         InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg(90753))
+         InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg(90754))
+         InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg(90756))
+         InitializeToolGroup(m_CurrMachine.bWaterJet, MCH_TY.WATERJET, EgtMsg(90755))
          ' Sposto tutti i parametri in su di una riga se testa e uscita sono disattivati
          If Not m_CurrMachine.bShowHeadExit Then
             MoveParam()
          End If
+         ' Verifico se macchina con nuovo SawbladeMaker
+         Dim sSawBladeMaker As String = ""
+         GetPrivateProfileString(S_TOOLS, K_SAWBLADEMAKER, "", sSawBladeMaker, m_MainWindow.GetIniFile())
+         m_bNewSawbladeMaker = String.Compare(sSawBladeMaker, "MakeStoneSawBlade.lua", True)
          m_bFirst = False
       Else
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
@@ -239,17 +248,17 @@ Public Class ToolsDbPageUC
             Next
             ' Determino il tipo di utensile
             Dim nType As Integer
-            EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+            EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
             ' Imposto testa e uscita
             ' Sempre lame su H1.1 e utensili foretto, fresa e mola da scasso su H1.2
-            If ( nType And MCH_TF.WATERJET) = 0 then
+            If (nType And MCH_TF.WATERJET) = 0 Then
                Dim bSaw As Boolean = ((nType And MCH_TF.SAWBLADE) <> 0)
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H1")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, If(bSaw, 1, 2))
-            ' Waterjet sempre su H2.1
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H1")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, If(bSaw, 1, 2))
+               ' Waterjet sempre su H2.1
             Else
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H2")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, 1)
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H2")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, 1)
             End If
             ' Per macchine senza ToolChanger, resetto la posizione su questo
             If m_CurrMachine.ShowToolChanger = 0 Then
@@ -317,8 +326,8 @@ Public Class ToolsDbPageUC
             EgtTdbGetCurrToolParam(MCH_TP.TYPE, CurrType)
             For Each ToolFamily As CathegoryItem In ToolsList
                If ToolFamily.nTType = CurrType Then
-                  Dim NewToolItem As New CustomItem( NewName, CurrType)
-                  ToolFamily.Items.Add( NewToolItem)
+                  Dim NewToolItem As New CustomItem(NewName, CurrType)
+                  ToolFamily.Items.Add(NewToolItem)
                   NewToolItem.IsSelected = True
                   GetToolParams()
                   m_OldItem = ToolTreeView.SelectedItem
@@ -354,15 +363,15 @@ Public Class ToolsDbPageUC
          Dim sItems() As String = sUserNotes.Split(";".ToCharArray)
          For i As Integer = 0 To sItems.Count() - 1
             If sItems(i).Contains("CODE=") Then
-               CodeTxBx.Text = sItems(i).Substring( 5)
+               CodeTxBx.Text = sItems(i).Substring(5)
             ElseIf sItems(i).Contains("SUPPL=") Then
-               SupplierTxBx.Text = sItems(i).Substring( 6)
+               SupplierTxBx.Text = sItems(i).Substring(6)
             ElseIf sItems(i).Contains("S/N=") Then
-               SerNbrTxBx.Text = sItems(i).Substring( 4)
+               SerNbrTxBx.Text = sItems(i).Substring(4)
             ElseIf sItems(i).Contains("END=") Then
                EndLifeChBx.IsChecked = True
-               m_sEndLife = sItems(i).Substring( 4)
-            ElseIf Not String.IsNullOrWhiteSpace(sItems(i))
+               m_sEndLife = sItems(i).Substring(4)
+            ElseIf Not String.IsNullOrWhiteSpace(sItems(i)) Then
                sToShow &= sItems(i) & ";"
             End If
          Next
@@ -383,7 +392,7 @@ Public Class ToolsDbPageUC
       sUserNotes &= "SUPPL=" & SupplierTxBx.Text & ";"
       sUserNotes &= "S/N=" & SerNbrTxBx.Text & ";"
       If EndLifeChBx.IsChecked Then
-         If String.IsNullOrWhiteSpace( m_sEndLife) Then
+         If String.IsNullOrWhiteSpace(m_sEndLife) Then
             m_sEndLife = My.Computer.Clock.LocalTime.ToString("dd.MM.yyyy HH:mm:ss")
          End If
          sUserNotes &= "END=" & m_sEndLife & ";"
@@ -479,18 +488,217 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista utensili per esportazione
+      Dim ToolToExportList = New ObservableCollection(Of ImpExpToolFamily)
+      Dim Family As CathegoryItem
+      Dim Tool As CustomItem
+      For Each Family In ToolsList
+         Dim ImpExpToolFamily As New ImpExpToolFamily(Family.Name, Family.nTType)
+         ImpExpToolFamily.PictureString = "/Resources/ToolsTreeviewImages/Folder.png"
+         For Each Tool In Family.Items
+            Dim CurrTool = New ImpExpToolItem(Tool.Name, False)
+            ImpExpToolFamily.ToolList.Add(CurrTool)
+         Next
+         ToolToExportList.Add(ImpExpToolFamily)
+      Next
+
+      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList, True)
+      Dim ExportWnd As New ImportExportToolWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Tools (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileToolNameList As String() = Nothing
+      Dim ImportFileToolFamilyList As Integer() = Nothing
+      If Not EgtTdbToBeImported(ImportFilePath, ImportFileToolNameList, ImportFileToolFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim ToolToImportList As New ObservableCollection(Of ImpExpToolFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For ToolIndex As Integer = 0 To ImportFileToolNameList.Count - 1
+         Dim ToolName As String = ImportFileToolNameList(ToolIndex)
+         Dim ToolFamily As Integer = ImportFileToolFamilyList(ToolIndex)
+         ToolFamily = ToolFamily And
+            (MCH_TF.DRILLBIT Or
+            MCH_TF.SAWBLADE Or
+            MCH_TF.MILL Or
+            MCH_TF.MORTISE Or
+            MCH_TF.CHISEL Or
+            MCH_TF.WATERJET Or
+            MCH_TF.COMPO)
+         Dim bFounded As Boolean = False
+         Dim ToolToImportFamily As ImpExpToolFamily
+         For Each ToolToImportFamily In ToolToImportList
+            If (ToolFamily = ToolToImportFamily.FamilyType) Then
+               ToolToImportFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpToolFamily(GetToolFamilyName(ToolFamily), ToolFamily)
+            NewFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+            ToolToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, False, ImportFilePath, ImportFileToolNameList)
+      Dim ImportWnd As New ImportExportToolWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineTools(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(ToolName As String) As Boolean
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         Dim ToolItem As CustomItem
+         For Each ToolItem In ToolFamily.Items
+            If ToolName = ToolItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetToolFamilyName(NewToolFamily As Integer) As String
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         If NewToolFamily = ToolFamily.nTType Then
+            Return ToolFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineTools(vsImportedTools As String())
+      ' Leggo tutti gli utensili presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveToolsFamilies() As ToolsFamily = MyReadToolFamilies(m_CurrMachine.sMachIniFile)
+      Dim ToolsFamilyIndex As Integer = 0
+      Dim ToolsFamilyItem As ToolsFamily
+      For Each ToolsFamilyItem In ActiveToolsFamilies
+         ' dalla lista che ho ricavato dalla libreria recupero gli utensili associati
+         Dim FamilyTreeView As New CathegoryItem(ToolsFamilyItem.Name, ToolsFamilyItem.Id)
+         Dim ToolFamilyItem = ToolsList.FirstOrDefault(Function(ToolFamily) ToolFamily.nTType = ToolsFamilyItem.Id)
+         If IsNothing(ToolFamilyItem) Then
+            ToolsList.Insert(ToolsFamilyIndex, FamilyTreeView)
+         Else
+            ' ricerco l'indice nella lista Tools
+
+         End If
+         Dim nType As Integer = 0
+         Dim ToolName As String = String.Empty
+         Dim ToolIndex As Integer = 0
+         'EgtSetCurrentContext(ToolScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         If EgtTdbGetFirstTool(ToolsFamilyItem.Id, ToolName, nType) Then
+            Dim ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+            If IsNothing(ToolItem) Then
+               ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            ElseIf vsImportedTools.Contains(ToolName) Then
+               ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+               ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            End If
+            ToolIndex += 1
+            While EgtTdbGetNextTool(ToolsFamilyItem.Id, ToolName, nType)
+               ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+               If IsNothing(ToolItem) Then
+                  ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               ElseIf vsImportedTools.Contains(ToolName) Then
+                  ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+                  ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+                  ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               End If
+               ToolIndex += 1
+            End While
+         End If
+         ToolsFamilyIndex += 1
+      Next
+
+   End Sub
+
+   Public Function MyReadToolFamilies(sMachineIniPath As String) As ToolsFamily()
+      Dim ActiveToolsFamiliesList As New List(Of ToolsFamily)
+
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Punta e Lama nelle famiglie di utensili attivi è invertito 
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_SAWBLADE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.SAWBLADE, EgtMsg(31000 + 2)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_DRILLBIT, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.DRILLBIT, EgtMsg(31000 + 1)))
+      End If
+
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MILL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(31000 + 3)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "CupWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90754)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "PolishingWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90756)))
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MORTISE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MORTISE, EgtMsg(31000 + 4)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_CHISEL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.CHISEL, EgtMsg(31000 + 9)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_COMPO, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.COMPO, EgtMsg(31000 + 5)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.WATERJET, EgtMsg(31010)))
+      End If
+      Return ActiveToolsFamiliesList.ToArray
+   End Function
+
    Friend Sub InitializeToolGroup(bEnabled As Boolean, nTType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
-      Dim ToolCathegory As New CathegoryItem( sFName, nTType)
+      Dim ToolCathegory As New CathegoryItem(sFName, nTType)
       Dim nType As Integer = 0
       Dim ToolName As String = String.Empty
-      Dim bFound As Boolean = EgtTdbGetFirstTool( nTType, ToolName, nType)
+      Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add( New CustomItem( ToolName, nType))
-         bFound = EgtTdbGetNextTool( nTType, ToolName, nType)
+         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
-      ToolsList.Add( ToolCathegory)
+      ToolsList.Add(ToolCathegory)
    End Sub
 
    Private Sub GetToolParams()
@@ -545,7 +753,7 @@ Public Class ToolsDbPageUC
       HeadTxBx.Text = ToolString
       EgtTdbGetCurrToolParam(MCH_TP.EXIT_, ToolInt)
       ExitTxBx.Text = ToolInt.ToString()
-      if Not GetSpecials() Then
+      If Not GetSpecials() Then
          EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, ToolString)
          UserNotesTxBx.Text = ToolString
       End If
@@ -601,7 +809,7 @@ Public Class ToolsDbPageUC
       EgtTdbSetCurrToolParam(MCH_TP.HEAD, HeadTxBx.Text)
       Int32.TryParse(ExitTxBx.Text, nTemp)
       EgtTdbSetCurrToolParam(MCH_TP.EXIT_, nTemp)
-      if Not SetSpecials() Then
+      If Not SetSpecials() Then
          EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, UserNotesTxBx.Text)
       End If
    End Sub
@@ -637,7 +845,7 @@ Public Class ToolsDbPageUC
       Dim bShowUserNotes As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowUserNotes <> 0) Or m_CurrMachine.ShowUserNotes = 1)
       UserNotesTxBl.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       UserNotesTxBx.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
-      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1) 
+      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1)
       SerNbrTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       SerNbrTxBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       CodeTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
@@ -708,6 +916,8 @@ Public Class ToolsDbPageUC
       ' Aggiorno visualizzazione
       EgtSetCurrentContext(ToolScene.GetCtx())
       EgtSetView(VT.TOP, False)
+      'EgtSetGenericView(150, -150)
+      'EgtSetView(VT.ISO_SE, False)
       EgtZoom(ZM.ALL)
    End Sub
 
@@ -757,6 +967,10 @@ Public Class ToolsDbPageUC
             nMsg = MSG_TOOLSDBPAGEUC + 23       ' Spessore
          Case MCH_TP.MAXMAT
             nMsg = MSG_TOOLSDBPAGEUC + 24       ' Tagliente
+         Case MCH_TP.CORE
+            nMsg = 90720                        ' Anima
+         Case STEM
+            nMsg = 90719                        ' Lunghezza portautensile
       End Select
       ' Predispongo calcolatrice (converto sempre in UIUnits perchè tutte lunghezze)
       Dim EgtCalculator As New EgtCalculatorWD(m_MainWindow, EgtToUiUnits(dVal), 300, WidthType.PIXEL, 0, 0, EgtMsg(nMsg))
@@ -774,7 +988,7 @@ Public Class ToolsDbPageUC
    Private Sub RecreateToolDraw(ByVal dVal As Double)
       ' Salvo il vecchio valore
       Dim dOldVal As Double
-      GetVariableValue( dOldVal)
+      GetVariableValue(dOldVal)
       ' Aggiorno dati utensile
       SetVariableValue(dVal)
       ' Creo utensile
@@ -787,7 +1001,20 @@ Public Class ToolsDbPageUC
    Private Function GetVariableValue(ByRef dVal As Double) As Boolean
       ' Recupero valore variabile
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      Return EgtTdbGetCurrToolParam(GetVariableType(), dVal)
+      Dim nVarType As Integer = GetVariableType()
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nVarType <> STEM Then
+         Return EgtTdbGetCurrToolParam(nVarType, dVal)
+      Else
+         Dim dL, dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.LEN, dL) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            dVal = Math.Max(dL - (dCore + dTh) / 2, 0.0)
+            Return True
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function SetVariableValue(ByVal dVal As Double) As Boolean
@@ -801,6 +1028,30 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dVal + 1)
             Case MCH_TP.DIAM
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
+            Case MCH_TP.THICK
+               If m_bNewSawbladeMaker Then
+                  Dim dTh, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dTh) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
+            Case MCH_TP.CORE
+               If m_bNewSawbladeMaker Then
+                  Dim dCore, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dCore) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
          End Select
       ElseIf m_nToolType = MCH_TY.DRILL_STD Then
          Select Case nType
@@ -826,7 +1077,19 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
          End Select
       End If
-      Return EgtTdbSetCurrToolParam(nType, dVal)
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nType <> STEM Then
+         Return EgtTdbSetCurrToolParam(nType, dVal)
+      Else
+         Dim dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            Dim dL As Double = Math.Max(dVal, 0.0) + ((dCore + dTh) / 2)
+            EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dL + 1)
+            Return EgtTdbSetCurrToolParam(MCH_TP.LEN, dL)
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function GetVariableType() As Integer
@@ -839,6 +1102,10 @@ Public Class ToolsDbPageUC
          nType = MCH_TP.THICK
       ElseIf m_sCurrVar = "MAXMAT" Then
          nType = MCH_TP.MAXMAT
+      ElseIf m_sCurrVar = "CORE" Then
+         nType = MCH_TP.CORE
+      ElseIf m_sCurrVar = "STEM" Then
+         nType = STEM
       End If
       Return nType
    End Function
@@ -900,6 +1167,13 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.THICK, dToolThick)
                EgtOutLog("ToolThick too small ->" & DoubleToString(dToolThick, 1))
             End If
+            Dim dToolCore As Double
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dToolCore)
+            If dToolCore < EPS_SMALL Then
+               dToolCore = If(dToolLen >= dToolThick, dToolThick - 1, 2 * dToolLen - dToolThick)
+               EgtTdbSetCurrToolParam(MCH_TP.CORE, dToolCore)
+               EgtOutLog("ToolCore too small ->" & DoubleToString(dToolCore, 1))
+            End If
             Dim dToolMaxMat As Double
             EgtTdbGetCurrToolParam(MCH_TP.MAXMAT, dToolMaxMat)
             If dToolMaxMat < EPS_SMALL Then
@@ -1002,7 +1276,7 @@ Public Class ToolsDbPageUC
    End Function
 
    Private Function CreateToolDraw() As Boolean
-      Dim nErr As Integer = EgtTdbCurrToolDraw( m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
+      Dim nErr As Integer = EgtTdbCurrToolDraw(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
       EgtSetCurrentContext(ToolScene.GetCtx())
       Return (nErr = 0)
    End Function
@@ -1055,4 +1329,4 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
-End Class
+End Class

Machine/WaterJetPageUC.xaml

@@ -0,0 +1,263 @@
+<UserControl x:Class="WaterJetPageUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+   mc:Ignorable="d" 
+   d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
+
+    <!-- Definizione della PolishingsPage -->
+    <Border Style="{DynamicResource OmagCut_PageBorder}">
+
+        <Grid Name="WaterJetPageGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="8*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!--Lista dei materiali-->
+            <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+                      Header="{Binding Material_Msg}"
+                      Grid.Row="0" BorderThickness="0">
+
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
+
+                    <!--Lista dei materiali-->
+                    <ListBox Name="MaterialsLstBx" 
+                             ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
+                             Grid.RowSpan="2">
+                        <ListBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ListBox.ItemTemplate>
+                    </ListBox>
+                    <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                    <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                                          Width="220"
+                                          Text="{Binding sNewMaterial}"
+                                          Visibility="{Binding NewMaterial_Visibility}"
+                                          Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                          KeyboardPosition="Top"/>
+                    <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                    <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewMaterialBtn" Grid.Column="0"
+                                Content="{Binding New_Msg}"
+                                Command="{Binding NewMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                                Content="{Binding Delete_Msg}"
+                                Command="{Binding DeleteMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                                Content="{Binding Modify_Msg}"
+                                Command="{Binding ModifyMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                    </UniformGrid>
+
+                </Grid>
+
+            </GroupBox>
+
+            <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+            <Border Style="{DynamicResource OmagCut_Border}" 
+                    Grid.Column="1" Grid.Row="0" 
+                    Grid.ColumnSpan="2" Grid.RowSpan="1">
+
+                <Grid Name="SubMaterialGrd" Grid.Column="1">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
+
+                    <!--Sottocategoria dei materiali associata alla lista precedente-->
+                    <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+                              Header="{Binding SubMaterial_Msg}"
+                              Grid.Column="0" Grid.Row="0" 
+                              Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
+
+                        <Grid Grid.Column="1">
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
+
+                            <!--Lista dei materiali-->
+                            <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
+                                     Grid.RowSpan="2">
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
+
+                            <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                            <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                                                  Width="220"
+                                                  Text="{Binding sNewSubMaterial}"
+                                                  Visibility="{Binding NewSubMaterial_Visibility}"
+                                                  Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                                  KeyboardPosition="Top"/>
+
+                            <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                            <UniformGrid Grid.Row="2" Columns="3">
+                                <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                                        Content="{Binding New_Msg}"
+                                        Command="{Binding NewSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Delete_Msg}"
+                                        Command="{Binding DeleteSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Modify_Msg}"
+                                        Command="{Binding ModifySubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                            </UniformGrid>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                    <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+                    <GroupBox Name="ParamsGpBx" 
+                              Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
+                              Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
+                        
+                        <!--Titolazione delle colonne della tabella-->
+                        <GroupBox.Header >
+                            <Grid Width="700">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+
+                                <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                            </Grid>
+                            
+                        </GroupBox.Header>
+                        
+                        <!--Definizione della Grid dei parametri delle lavorazioni-->
+                        <Grid Grid.Column="2">
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
+
+                            <ListBox Name="ParamLstBx"
+                                     ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
+                                     Margin="0,0,0,0"
+                                     Grid.RowSpan="2">
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <Grid Width="700">
+                                            <Grid.ColumnDefinitions>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                            </Grid.ColumnDefinitions>
+
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+
+                                        </Grid>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
+
+                            <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="3">
+                                <Button Name="NewParamBtn" Grid.Column="0"
+                                        Command="{Binding NewWjParamCommand}"
+                                        Content="{Binding New_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="RemoveParamBtn" Grid.Column="1"
+                                        Command="{Binding DeleteWjParamCommand}"
+                                        Content="{Binding Delete_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                            </UniformGrid>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                </Grid>
+            </Border>
+            <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+                    Command="{Binding SaveCommand}"
+                    Content="{Binding Save_Msg}"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+        </Grid>
+
+    </Border>
+
+</UserControl>

Machine/WaterJetPageUC.xaml.vb

@@ -0,0 +1,55 @@
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+Imports EgtUILib
+Imports EgtWPFLib
+Imports EgtWPFLib5
+
+Public Class WaterJetPageUC
+
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterjetDbWindowVM As WaterjetDbWindowVM_OmagCUT
+   Private m_sOrigNewMaterial As String = String.Empty
+   Private m_sOrigNewSubMaterial As String = String.Empty
+
+   Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      Me.DataContext = m_refWaterjetDbWindowVM
+      EgtWPFLib.Utility.MainWindow = m_MainWindow
+   End Sub
+
+   Public Sub WaterJetPage_Reinitialize()
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      Me.DataContext = m_refWaterjetDbWindowVM
+   End Sub
+
+   Private Sub NewMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtOpening
+      m_sOrigNewMaterial = NewMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewSubMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtOpening
+      m_sOrigNewSubMaterial = NewSubMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewMaterial = NewMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewMaterial) OrElse m_refWaterjetDbWindowVM.sNewMaterial = m_sOrigNewMaterial Then
+         m_refWaterjetDbWindowVM.NewMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+   Private Sub NewSubMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewSubMaterial = NewSubMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewSubMaterial) OrElse m_refWaterjetDbWindowVM.sNewSubMaterial = m_sOrigNewSubMaterial Then
+         m_refWaterjetDbWindowVM.NewSubMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewSubMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+End Class
+

Machine/WaterJetPageVM.vb

@@ -0,0 +1,891 @@
+'Imports System.Collections.ObjectModel
+'Imports System.ComponentModel
+'Imports EgtUILib
+'Imports EgtWPFLib
+
+'Public Class WaterJetPageVM
+'   Private m_refWaterPageV As WaterJetPageUC
+
+'   ' lista dei materiali
+'   Private m_ListMaterial As New ObservableCollection(Of MaterialWJ)
+'   Public ReadOnly Property ListMaterial As ObservableCollection(Of MaterialWJ)
+'      Get
+'         Return m_ListMaterial
+'      End Get
+'   End Property
+'   ' materiale selezionato
+'   Private m_SelectedMaterial As MaterialWJ
+'   Public Property SelectedMaterial As MaterialWJ
+'      Get
+'         Return m_SelectedMaterial
+'      End Get
+'      Set(value As MaterialWJ)
+'         m_SelectedMaterial = value
+'      End Set
+'   End Property
+'   ' submateriale selezionato
+'   Private m_SelectedSubMaterial As SubMaterialWJ
+'   Public Property SelectedSubMaterial As SubMaterialWJ
+'      Get
+'         Return m_SelectedSubMaterial
+'      End Get
+'      Set(value As SubMaterialWJ)
+'         m_SelectedSubMaterial = value
+'      End Set
+'   End Property
+'   ' lista parametri selezionata
+'   Private m_SelectedParam As ParamWJ
+'   Public Property SelectedParam As ParamWJ
+'      Get
+'         Return m_SelectedParam
+'      End Get
+'      Set(value As ParamWJ)
+'         m_SelectedParam = value
+'      End Set
+'   End Property
+
+'   Private m_sNewMaterial As MaterialWJ
+'   Public Property sNewMaterial As String
+'      Get
+'         Return m_sNewMaterial.sMaterial
+'      End Get
+'      Set(value As String)
+'         m_sNewMaterial = New MaterialWJ(value)
+'      End Set
+'   End Property
+
+'   Private m_NewMaterialVisibility As Visibility = Visibility.Hidden
+'   Public Property NewMaterialVisibility As Visibility
+'      Get
+'         Return m_NewMaterialVisibility
+'      End Get
+'      Set(value As Visibility)
+'         m_NewMaterialVisibility = value
+'      End Set
+'   End Property
+
+'   Sub New(WaterJetPageV As WaterJetPageUC)
+'      m_refWaterPageV = WaterJetPageV
+'      ' Creo una lista di materiali come esempio
+'      ListMaterial.Add(New MaterialWJ("Marmo"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("10", "Bq1", "Bq2", "Bq3", "Bq4", "Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("20", "Nq1", "Nq2", "Nq3", "Nq4", "Nq5"))
+'      ListMaterial.Add(New MaterialWJ("Granito"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15", "gBq1", "gBq2", "Bq3", "gBq4", "gBq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.5", "g_Bq1", "g_Bq2", "g_Bq3", "g_Bq4", "g_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.8", "G_Bq1", "G_Bq2", "G_Bq3", "G_Bq4", "G_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("18", "gNq1", "gNq2", "gNq3", "gNq4", "gNq5"))
+
+'      SelectedMaterial = m_ListMaterial(0)
+'      SelectedSubMaterial = m_SelectedMaterial.ListOfSubMaterial(0)
+'      SelectedParam = SelectedSubMaterial.ListOfParam(0)
+'   End Sub
+
+'   Private m_cmdOk As ICommand
+'   Public ReadOnly Property OkCommand() As ICommand
+'      Get
+'         If m_cmdOk Is Nothing Then
+'            m_cmdOk = New Command(AddressOf Ok)
+'         End If
+'         Return m_cmdOk
+'      End Get
+'   End Property
+
+'   Private Sub Ok()
+'      ' Mostro textbox per il nome
+'      m_refWaterPageV.KitNameTxBx.Text = String.Empty
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Visible
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 1)
+'      MessageBox.Show("Prova di Binding", "Prova di Binding", MessageBoxButton.OK, MessageBoxImage.Asterisk, MessageBoxResult.OK)
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Hidden
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 2)
+'   End Sub
+
+'End Class
+
+
+'Public Class MaterialWJ
+
+'   Private m_sMaterial As String = String.Empty
+'   Public ReadOnly Property sMaterial As String
+'      Get
+'         Return m_sMaterial
+'      End Get
+'   End Property
+
+'   Private m_ListOfSubMaterial As New ObservableCollection(Of SubMaterialWJ)
+'   Public Property ListOfSubMaterial As ObservableCollection(Of SubMaterialWJ)
+'      Get
+'         Return m_ListOfSubMaterial
+'      End Get
+'      Set(value As ObservableCollection(Of SubMaterialWJ))
+'         m_ListOfSubMaterial = value
+'      End Set
+'   End Property
+
+'   Sub New(sMat As String)
+'      m_sMaterial = sMat
+'   End Sub
+
+'End Class
+
+'Public Class SubMaterialWJ
+
+'   Dim m_sSubMaterial As String
+'   Public Property sSubMaterial As String
+'      Get
+'         Return m_sSubMaterial
+'      End Get
+'      Set(value As String)
+'         m_sSubMaterial = value
+'      End Set
+'   End Property
+
+'   Private m_ListOfParam As New ObservableCollection(Of ParamWJ)
+'   Public Property ListOfParam As ObservableCollection(Of ParamWJ)
+'      Get
+'         Return m_ListOfParam
+'      End Get
+'      Set(value As ObservableCollection(Of ParamWJ))
+'         m_ListOfParam = value
+'      End Set
+'   End Property
+
+'   Sub New(sName As String)
+'      m_sSubMaterial = sName
+'   End Sub
+'End Class
+
+'Public Class ParamWJ
+
+'   Private m_Thickness As String
+'   Private m_Q1 As String
+'   Private m_Q2 As String
+'   Private m_Q3 As String
+'   Private m_Q4 As String
+'   Private m_Q5 As String
+
+'   Public Property Q1 As String
+'      Get
+'         Return m_Q1
+'      End Get
+'      Set(value As String)
+'         m_Q1 = value
+'      End Set
+'   End Property
+
+'   Public Property Thickness As String
+'      Get
+'         Return m_Thickness
+'      End Get
+'      Set(value As String)
+'         m_Thickness = value
+'      End Set
+'   End Property
+
+'   Public Property Q2 As String
+'      Get
+'         Return m_Q2
+'      End Get
+'      Set(value As String)
+'         m_Q2 = value
+'      End Set
+'   End Property
+
+'   Public Property Q3 As String
+'      Get
+'         Return m_Q3
+'      End Get
+'      Set(value As String)
+'         m_Q3 = value
+'      End Set
+'   End Property
+
+'   Public Property Q4 As String
+'      Get
+'         Return m_Q4
+'      End Get
+'      Set(value As String)
+'         m_Q4 = value
+'      End Set
+'   End Property
+
+'   Public Property Q5 As String
+'      Get
+'         Return m_Q5
+'      End Get
+'      Set(value As String)
+'         m_Q5 = value
+'      End Set
+'   End Property
+
+'   Sub New(sT As String, sQ1 As String, sQ2 As String, sQ3 As String, sQ4 As String, sQ5 As String)
+'      m_Thickness = sT
+'      m_Q1 = sQ1
+'      m_Q2 = sQ2
+'      m_Q3 = sQ3
+'      m_Q4 = sQ4
+'      m_Q5 = sQ5
+'   End Sub
+
+'End Class
+
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class WaterjetDbWindowVM
+   Inherits VMBase
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterPageV As WaterJetPageUC
+
+#Region "FIELDS & PROPERTIES"
+
+
+#Region "Materiali"
+   Private Property m_MaterialList As ObservableCollection(Of WjMaterial)
+   Public Property MaterialList As ObservableCollection(Of WjMaterial)
+      Get
+         Return m_MaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjMaterial))
+         m_MaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelMaterial As WjMaterial
+   Public Property SelMaterial As WjMaterial
+      Get
+         Return m_SelMaterial
+      End Get
+      Set(value As WjMaterial)
+         m_SelMaterial = value
+      End Set
+   End Property
+
+   Private Property m_sNewMaterial As String
+   Public Property sNewMaterial As String
+      Get
+         Return m_sNewMaterial
+      End Get
+      Set(value As String)
+         m_sNewMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewMaterial_Visibility As Visibility
+      Get
+         Return m_NewMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "SubMateriali"
+   Private Property m_SubMaterialList As New ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   'Private Property m_SelSubMaterial As WjSubMaterial
+   'Public Property SelSubMaterial As WjSubMaterial
+   '   Get
+   '      Return m_SelSubMaterial
+   '   End Get
+   '   Set(value As WjSubMaterial)
+   '      m_SelSubMaterial = value
+   '   End Set
+   'End Property
+
+   Private Property m_sNewSubMaterial As String
+   Public Property sNewSubMaterial As String
+      Get
+         Return m_sNewSubMaterial
+      End Get
+      Set(value As String)
+         m_sNewSubMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewSubMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewSubMaterial_Visibility As Visibility
+      Get
+         Return m_NewSubMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewSubMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewSubMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "Parametri"
+   Private Property m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   'Private Property m_SelParam As WjParam
+   'Public Property SelParam As WjParam
+   '   Get
+   '      Return m_SelParam
+   '   End Get
+   '   Set(value As WjParam)
+   '      m_SelParam = value
+   '   End Set
+   'End Property
+
+   Private m_HeadParamLstBx_Width As Double
+   Public ReadOnly Property HeadParamLstBx_Width As Double
+      Get
+         If m_HeadParamLstBx_Width < 10 Then
+            Return 700
+         End If
+         Return m_HeadParamLstBx_Width
+      End Get
+   End Property
+
+#End Region
+
+   Const S_MATERIALS As String = "Materials"
+
+   ' Definizione comandi
+   Private m_cmdNewMaterial As ICommand
+   Private m_cmdDeleteMaterial As ICommand
+   Private m_cmdNewSubMaterial As ICommand
+   Private m_cmdDeleteSubMaterial As ICommand
+   Private m_cmdNewWjParam As ICommand
+   Private m_cmdDeleteWjParam As ICommand
+   Private m_cmdSave As ICommand
+   Private m_cmdDone As ICommand
+
+#End Region
+
+#Region "MESSAGES"
+
+   Public ReadOnly Property Material_Msg As String
+      Get
+         Return "Materiale"
+      End Get
+   End Property
+
+   Public ReadOnly Property SubMaterial_Msg As String
+      Get
+         Return "SubMateriale"
+      End Get
+   End Property
+
+   Public ReadOnly Property Id_Msg As String
+      Get
+         Return "Id"
+      End Get
+   End Property
+
+   Public ReadOnly Property Thickness_Msg As String
+      Get
+         Return "Spessore"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q1_Msg As String
+      Get
+         Return "Q1"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q2_Msg As String
+      Get
+         Return "Q2"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q3_Msg As String
+      Get
+         Return "Q3"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q4_Msg As String
+      Get
+         Return "Q4"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q5_Msg As String
+      Get
+         Return "Q5"
+      End Get
+   End Property
+
+   Public ReadOnly Property QExtra_Msg As String
+      Get
+         Return "QExtra"
+      End Get
+   End Property
+
+   Public ReadOnly Property New_Msg As String
+      Get
+         Return "Nuovo"
+      End Get
+   End Property
+
+   Public ReadOnly Property Delete_Msg As String
+      Get
+         Return "Elimina"
+      End Get
+   End Property
+
+   Public ReadOnly Property Save_Msg As String
+      Get
+         Return "Salva"
+      End Get
+   End Property
+
+   Public ReadOnly Property Modify_Msg As String
+      Get
+         Return "Modifica"
+      End Get
+   End Property
+
+#End Region
+
+#Region "CONSTRUCTOR"
+
+   Sub New(refContext As WaterJetPageUC)
+      ' definisco il riferiento con la pagina xaml
+      m_refWaterPageV = refContext
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = m_MainWindow.m_CurrentMachine.sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      MaterialList = New ObservableCollection(Of WjMaterial)
+
+      If File.Exists(sFilePath) Then
+         Dim sMaterial As String = String.Empty
+
+         If EgtUILib.GetPrivateProfileString(S_MATERIALS, "1", "", sMaterial, sFilePath) > 0 Then
+            Dim sMaterials() As String = sMaterial.Split(","c)
+            Dim ind As Integer = 0
+            For ind = 0 To sMaterials.Length() - 1
+
+               'recupero i sottomateriali
+               Dim Index As Integer = 1
+               Dim sSubMat As String = String.Empty
+               Dim SubMatList As New ObservableCollection(Of WjSubMaterial)
+               While EgtUILib.GetPrivateProfileString(sMaterials(ind), Index.ToString(), "", sSubMat, sFilePath) > 0
+
+
+                  ' recupero la lista dei Q
+                  Dim QInd As Integer = 1
+                  Dim sParam As String = String.Empty
+                  Dim QParamList As New ObservableCollection(Of WjParam)
+                  While EgtUILib.GetPrivateProfileString(sMaterials(ind) & "." & sSubMat, QInd.ToString(), "", sParam, sFilePath) > 0
+                     Dim sParams() As String = sParam.Split(","c)
+                     If sParams.Length() >= 7 Then
+                        Dim dThickness As Double
+                        Dim dQ1 As Double
+                        Dim dQ2 As Double
+                        Dim dQ3 As Double
+                        Dim dQ4 As Double
+                        Dim dQ5 As Double
+                        Dim dQExtra As Double
+                        StringToDouble(sParams(0), dThickness)
+                        StringToDouble(sParams(1), dQ1)
+                        StringToDouble(sParams(2), dQ2)
+                        StringToDouble(sParams(3), dQ3)
+                        StringToDouble(sParams(4), dQ4)
+                        StringToDouble(sParams(5), dQ5)
+                        StringToDouble(sParams(6), dQExtra)
+                        QParamList.Add(New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV))
+                     End If
+                     QInd += 1
+                  End While
+
+                  SubMatList.Add(New WjSubMaterial(sSubMat, QParamList))
+                  Index += 1
+               End While
+
+               MaterialList.Add(New WjMaterial(sMaterials(ind), SubMatList))
+            Next
+
+         End If
+
+      End If
+
+   End Sub
+
+   Public Sub RefreshDImensionPage()
+      m_HeadParamLstBx_Width = m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      NotifyPropertyChanged(NameOf(HeadParamLstBx_Width))
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "COMMANDS"
+
+#Region "NewMaterialCommand"
+
+   Public ReadOnly Property NewMaterialCommand As ICommand
+      Get
+         If m_cmdNewMaterial Is Nothing Then
+            m_cmdNewMaterial = New Command(AddressOf NewMaterial)
+         End If
+         Return m_cmdNewMaterial
+      End Get
+   End Property
+
+   Public Sub NewMaterial(ByVal param As Object)
+      NewSubMaterial_Visibility = Visibility.Collapsed
+      NewMaterial_Visibility = Visibility.Visible
+   End Sub
+
+#End Region ' NewMaterial
+
+#Region "DeleteMaterialCommand"
+
+   Public ReadOnly Property DeleteMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteMaterial Is Nothing Then
+            m_cmdDeleteMaterial = New Command(AddressOf DeleteMaterial)
+         End If
+         Return m_cmdDeleteMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         MaterialList.Remove(SelMaterial)
+         'SelMaterial.NotifyPropertyChanged(NameOf(MaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteMaterial
+
+#Region "NewSubMaterialCommand"
+
+   Public ReadOnly Property NewSubMaterialCommand As ICommand
+      Get
+         If m_cmdNewSubMaterial Is Nothing Then
+            m_cmdNewSubMaterial = New Command(AddressOf NewSubMaterial)
+         End If
+         Return m_cmdNewSubMaterial
+      End Get
+   End Property
+
+   Public Sub NewSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         NewMaterial_Visibility = Visibility.Collapsed
+         NewSubMaterial_Visibility = Visibility.Visible
+
+      End If
+   End Sub
+
+#End Region ' NewSubMaterial
+
+#Region "DeleteSubMaterialCommand"
+
+   Public ReadOnly Property DeleteSubMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteSubMaterial Is Nothing Then
+            m_cmdDeleteSubMaterial = New Command(AddressOf DeleteSubMaterial)
+         End If
+         Return m_cmdDeleteSubMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         SelMaterial.SubMaterialList.Remove(SelMaterial.SelSubMaterial)
+         SelMaterial.NotifyPropertyChanged(NameOf(SubMaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteSubMaterial
+
+#Region "NewWjParamCommand"
+
+   Public ReadOnly Property NewWjParamCommand As ICommand
+      Get
+         If m_cmdNewWjParam Is Nothing Then
+            m_cmdNewWjParam = New Command(AddressOf NewWjParam)
+         End If
+         Return m_cmdNewWjParam
+      End Get
+   End Property
+
+   Public Sub NewWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         Dim nId As Integer = 0
+         If IsNothing(SelMaterial.SelSubMaterial.ParamList) Then
+            nId = 1
+            SelMaterial.SelSubMaterial.ParamList = New ObservableCollection(Of WjParam)
+         Else
+            nId = SelMaterial.SelSubMaterial.ParamList.Count + 1
+         End If
+         SelMaterial.SelSubMaterial.ParamList.Add(New WjParam(nId, 0, 0, 0, 0, 0, 0, 0, m_refWaterPageV))
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' NewWjParam
+
+#Region "DeleteWjParamCommand"
+
+   Public ReadOnly Property DeleteWjParamCommand As ICommand
+      Get
+         If m_cmdDeleteWjParam Is Nothing Then
+            m_cmdDeleteWjParam = New Command(AddressOf DeleteWjParam)
+         End If
+         Return m_cmdDeleteWjParam
+      End Get
+   End Property
+
+   Public Sub DeleteWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial.SelWjParam) Then
+         SelMaterial.SelSubMaterial.ParamList.Remove(SelMaterial.SelSubMaterial.SelWjParam)
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' DeleteWjParam
+
+#Region "DoneCommand"
+
+   Public ReadOnly Property DoneCommand As ICommand
+      Get
+         If m_cmdDone Is Nothing Then
+            m_cmdDone = New Command(AddressOf Done)
+         End If
+         Return m_cmdDone
+      End Get
+   End Property
+
+   Public Sub Done(ByVal param As Object)
+      If NewMaterial_Visibility = Visibility.Visible Then
+         MaterialList.Add(New WjMaterial(sNewMaterial))
+         NotifyPropertyChanged(NameOf(MaterialList))
+         NewMaterial_Visibility = Visibility.Collapsed
+      ElseIf NewSubMaterial_Visibility = Visibility.Visible Then
+         SelMaterial.SubMaterialList.Add(New WjSubMaterial(sNewSubMaterial))
+         NotifyPropertyChanged(NameOf(SubMaterialList))
+         NewSubMaterial_Visibility = Visibility.Collapsed
+      End If
+   End Sub
+
+#End Region ' Done
+
+#End Region    ' Commands
+
+End Class
+
+Public Class WjMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_SubMaterialList As ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelSubMaterial As WjSubMaterial
+   Public Property SelSubMaterial As WjSubMaterial
+      Get
+         Return m_SelSubMaterial
+      End Get
+      Set(value As WjSubMaterial)
+         m_SelSubMaterial = value
+      End Set
+   End Property
+
+   Sub New(sName As String, SubMatList As ObservableCollection(Of WjSubMaterial))
+      m_Name = sName
+      m_SubMaterialList = SubMatList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjSubMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   Private Property m_SelWjParam As WjParam
+   Public Property SelWjParam As WjParam
+      Get
+         Return m_SelWjParam
+      End Get
+      Set(value As WjParam)
+         m_SelWjParam = value
+      End Set
+   End Property
+
+   Sub New(sName As String, ParamList As ObservableCollection(Of WjParam))
+      m_Name = sName
+      m_ParamList = ParamList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjParam
+
+   Private m_Id As Integer
+   Public Property Id As Integer
+      Get
+         Return m_Id
+      End Get
+      Set(value As Integer)
+         m_Id = value
+      End Set
+   End Property
+
+   Private m_Thickness As Double
+   Public Property Thickness As Double
+      Get
+         Return m_Thickness
+      End Get
+      Set(value As Double)
+         m_Thickness = value
+      End Set
+   End Property
+
+   Private m_Q1 As Double
+   Public Property Q1 As Double
+      Get
+         Return m_Q1
+      End Get
+      Set(value As Double)
+         m_Q1 = value
+      End Set
+   End Property
+
+   Private m_Q2 As Double
+   Public Property Q2 As Double
+      Get
+         Return m_Q2
+      End Get
+      Set(value As Double)
+         m_Q2 = value
+      End Set
+   End Property
+
+   Private m_Q3 As Double
+   Public Property Q3 As Double
+      Get
+         Return m_Q3
+      End Get
+      Set(value As Double)
+         m_Q3 = value
+      End Set
+   End Property
+
+   Private m_Q4 As Double
+   Public Property Q4 As Double
+      Get
+         Return m_Q4
+      End Get
+      Set(value As Double)
+         m_Q4 = value
+      End Set
+   End Property
+
+   Private m_Q5 As Double
+   Public Property Q5 As Double
+      Get
+         Return m_Q5
+      End Get
+      Set(value As Double)
+         m_Q5 = value
+      End Set
+   End Property
+
+   Private m_QExtra As Double
+   Public Property QExtra As Double
+      Get
+         Return m_QExtra
+      End Get
+      Set(value As Double)
+         m_QExtra = value
+      End Set
+   End Property
+
+   Public ReadOnly Property ParamLstBx_Width As Double
+      Get
+         Return m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      End Get
+   End Property
+
+   Private m_refWaterPageV As WaterJetPageUC
+
+   Sub New(nId As Integer, dThickness As Double, dQ1 As Double, dQ2 As Double, dQ3 As Double, dQ4 As Double, dQ5 As Double, dQExtra As Double, ByRef refWJPage As WaterJetPageUC)
+      m_Id = nId
+      m_Thickness = dThickness
+      m_Q1 = dQ1
+      m_Q2 = dQ2
+      m_Q3 = dQ3
+      m_Q4 = dQ4
+      m_Q5 = dQ5
+      m_QExtra = dQExtra
+      m_refWaterPageV = refWJPage
+   End Sub
+
+End Class

Machine/WaterjetDbWindowVM.vb

@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib
+
+' nuova libreria EgtWPFLib5 ver 2.4g1
+Public Class WaterjetDbWindowVM_OmagCUT
+   Inherits EgtWPFLib5.WaterjetDbWindowVM
+
+   Public Function CloseWaterjetDb_OmagCut(MainWindow As Window) As SaveWndBtnEnum
+      If bIsModified Then
+         Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveWjDbWnd.m_nPressedBtn
+            Case 1   ' Yes
+               WriteWaterjetDb()
+               bIsModified = False
+               Return SaveWndBtnEnum.YES
+            Case 2   ' No
+               Return SaveWndBtnEnum.NO
+            Case Else   ' Cancel
+               Return SaveWndBtnEnum.CANCEL
+         End Select
+      Else
+         Dim bExitFor As Boolean = False
+         For Each Material As EgtWPFLib5.WjMaterial In MaterialList
+            If Not IsNothing(Material.SubMaterialList) Then
+               For Each SubMaterial As EgtWPFLib5.WjSubMaterial In Material.SubMaterialList
+                  If Not IsNothing(SubMaterial.ParamList) Then
+                     For Each QParam As EgtWPFLib5.WjParam In SubMaterial.ParamList
+                        bExitFor = QParam.IsModified()
+                        If bExitFor Then Exit For
+                     Next
+                  End If
+                  If bExitFor Then Exit For
+               Next
+            End If
+            If bExitFor Then Exit For
+         Next
+         If bExitFor Then
+            Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+            Select Case SaveWjDbWnd.m_nPressedBtn
+               Case 1   ' Yes
+                  WriteWaterjetDb()
+                  bIsModified = False
+                  Return SaveWndBtnEnum.YES
+               Case 2   ' No
+                  Return SaveWndBtnEnum.NO
+               Case Else   ' Cancel
+                  Return SaveWndBtnEnum.CANCEL
+            End Select
+         End If
+      End If
+      Return SaveWndBtnEnum.YES
+   End Function
+
+   Sub New(sMachDir As String)
+      MyBase.New(sMachDir)
+   End Sub
+
+End Class

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2305, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2305, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -433,7 +433,8 @@ Class MainWindow
       End If
 
       ' abilito il bottone per la gestione del comando di Check-Up-Start (posziona lama prelavorazione)
-      If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 Then
+      If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
+         Not File.Exists( m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
@@ -568,6 +569,12 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       ' disbilito Test
       TestOff()
+      ' disabilito DragRettangle
+      DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -624,6 +631,9 @@ Class MainWindow
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -677,6 +687,9 @@ Class MainWindow
    Private Sub CadCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles CadCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -729,6 +742,9 @@ Class MainWindow
    Private Sub FrameCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrameCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -752,8 +768,8 @@ Class MainWindow
             m_ActivePage = Pages.FrameCut
          Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.CSV
             ' Pages.Simulation: quando sono nella simulazione devo uscire dalla pagina
-            CadCutBtn.IsChecked = True
-            FrameCutBtn.IsChecked = False
+            CadCutBtn.IsChecked = False
+            FrameCutBtn.IsChecked = True
          Case Pages.FrameCut
             FrameCutBtn.IsChecked = True
          Case Pages.Machine
@@ -782,6 +798,9 @@ Class MainWindow
    Private Sub MachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachineBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -830,6 +849,9 @@ Class MainWindow
    Private Sub OptionsBtn_Click(sender As Object, e As RoutedEventArgs) Handles OptionsBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1067,6 +1089,15 @@ Class MainWindow
             If Not m_MachinePageUC.m_PolishingsPageUC.SaveKit() Then
                Return False
             End If
+         Case MachinePageUC.MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               Return False
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
       End Select
       Return True
    End Function
@@ -1093,12 +1124,15 @@ Class MainWindow
       If m_bNCLink And m_CurrentMachine.bProdLine Then
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
+      ElseIf m_CurrentMachine.bDemo Then
+         m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_ProdLineTimer.Start()
       End If
 
       ' seleziono il tipo di avvio
-      'm_CurrentProjectPageUC.StartProgram()
+      m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
-      EgtDraw()
+      EgtZoom(ZM.ALL, True)
    End Sub
 
    Friend Sub EgtWPFInit()
@@ -1124,9 +1158,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1193,7 +1233,7 @@ Class MainWindow
                nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
                nMove = 1
             End If
-         ' altrimenti forzo trasmissione ultimo inviato
+            ' altrimenti forzo trasmissione ultimo inviato
          Else
             nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
             nMove = 1
@@ -1222,6 +1262,10 @@ Class MainWindow
             Exit For
          End If
       Next
+
+      ' forzo la variabile CN - aggiornando il valore dell'indice del progetto in elaborazione
+      If m_CurrentMachine.bDemo Then nVarCopy = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, GetIniFile())
+
       ' Leggo variabile con ultimo progetto mandato a OmagView
       Dim nLastCopy As Integer = GetPrivateProfileInt(S_GENERAL, K_LASTPROJTOVIEW, 0, GetIniFile())
       ' Se non nulla e diversa da ultimo copiato, verifico se eseguire la copia
@@ -1781,7 +1825,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next
@@ -1867,8 +1913,30 @@ Class MainWindow
       ' deseleziono gli oggetti e spengo il bottone
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrentProjectPageUC.m_bSelectCurv = False
+      Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
+   End Sub
+
+   ' spegne il comando per la mofica dei rettangoli
+   Public Sub DragRettangleOff()
+      m_CadCutPageUC.m_NestPage.DragRettanleBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedDragRettangle = False
+      ShowParkedParts()
+
+   End Sub
+
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
    End Sub
 
 End Class

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("EgalTech s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2021 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2022 by EgalTech s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.6.3")>
-<Assembly: AssemblyFileVersion("2.3.6.3")>
+<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.7.1")>

NcComm/CNCommunication.vb

@@ -11,6 +11,8 @@ Public Class CNCommunication
    Private m_AlarmsPage As AlarmsPageUC = m_MainWindow.m_MachinePageUC.m_AlarmsPageUC
    Private m_CurrProjPage As CurrentProjectPageUC = m_MainWindow.m_CurrentProjectPageUC
 
+   Friend m_nCountRefresh As Integer = 0
+
    ' Variabile per tipologia CN
    Friend m_nNCType As Integer
 
@@ -225,8 +227,11 @@ Public Class CNCommunication
 
          ' definisco il tipo di varibili che devono essere scritte nl plc
          Dim sVal As String = String.Empty
-         GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
-         m_CN.m_NewVariable = sVal <> 0
+         Dim nVal As Integer = 0
+         'GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWVARIABLE, nVal, m_MainWindow.GetMachIniFile())
+         'm_CN.m_NewVariable = sVal <> "0"
+         m_CN.m_NewVariable = (nVal <> 0)
          EgtOutLog("NewVariable=" & If(m_CN.m_NewVariable, "1", "0"))
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
@@ -276,6 +281,14 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.LimitZ, sVal)
          GetPrivateProfileString(S_NCDATA, K_POWEROVR, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.PowerOvr, sVal)
+
+         GetPrivateProfileString(S_NCDATA, K_PARKING, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.Parking, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEZONE, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnableZone, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEPC, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnablePC, sVal)
+
          GetPrivateProfileString(S_NCDATA, K_VACUUMUP, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumUp, sVal)
          GetPrivateProfileString(S_NCDATA, K_VACUUMDOWN, "", sVal, m_MainWindow.GetMachIniFile())
@@ -326,20 +339,23 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
 
          ' nuove variabili: stato dei nuovi pulsanti
-         m_IsNewConsole = GetPrivateProfileString(S_NCDATA, K_NEWCONSOLE, "", sVal, m_MainWindow.GetMachIniFile())
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
+         m_IsNewConsole = (nVal = 1)
          If m_IsNewConsole Then
             GetPrivateProfileString(S_NCDATA, K_XYJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.XYJog, sVal)
-            GetPrivateProfileString(S_NCDATA, K_ZJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.ZJog, sVal)
-            GetPrivateProfileString(S_NCDATA, K_BCJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.BCJog, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.XYJog, sVal)
+            GetPrivateProfileString(S_NCDATA, K_ZCJOG, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZCJog, sVal)
+            GetPrivateProfileString(S_NCDATA, K_ZBJOG, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZBJog, sVal)
             GetPrivateProfileString(S_NCDATA, K_POWERON, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            GetPrivateProfileString(S_NCDATA, K_REMOTE, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-         ' Inizializzo la comunicazione
-         m_CN.Init()
+            ' Inizializzo la comunicazione
+            m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -373,6 +389,7 @@ Public Class CNCommunication
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
+                  m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
                      ' stati bottoni parte 1
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
@@ -389,6 +406,8 @@ Public Class CNCommunication
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
 
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+                  ElseIf m_CN.m_IsActiveModeSubscription Then
+                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
                Catch ex As Exception
                   EgtOutLog("Error starting Process -> NcLink=True type=0")
@@ -528,6 +547,9 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -556,8 +578,9 @@ Public Class CNCommunication
             ' Nuovi bottoni (uso joystick)
             If m_IsNewConsole Then
                m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
-               m_MainWindow.m_DirectCutPageUC.ZJogChanged(m_CN.bZJog)
-               m_MainWindow.m_DirectCutPageUC.BCJogChanged(m_CN.bBCJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -571,13 +594,19 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
             End If
-            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
 
             ' Nuovi bottoni (uso joystick) per Area4
             If m_IsNewConsole Then
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
-               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZJog)
-               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
             End If
 
          End If
@@ -606,6 +635,11 @@ Public Class CNCommunication
             m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
          End If
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
       End If
 
    End Sub
@@ -690,12 +724,17 @@ Public Class CNCommunication
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
 
-      Dim TempCurrMode As Short = m_CN.read_active_mode()
-      'EgtOutLog("Machine status: " & TempCurrMode)
-      If TempCurrMode <> m_nCurrMode Then
-         'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
-         m_nCurrMode = CInt(TempCurrMode)
-         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+      If m_nCountRefresh > 10 Then
+         Dim TempCurrMode As Short = m_CN.read_active_mode()
+         'EgtOutLog("Machine status: " & TempCurrMode)
+         If TempCurrMode <> m_nCurrMode Then
+            'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+            m_nCurrMode = CInt(TempCurrMode)
+            m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         End If
+         m_nCountRefresh = 0
+      Else
+         m_nCountRefresh = m_nCountRefresh + 1
       End If
 
       If m_CN.b_NC_error Then

NcComm/CN_Siemens.vb

@@ -131,8 +131,7 @@ Public Class CN_Siemens
 
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
-      'Return M_MMFiles.read_active_mode()
-      If m_IsSiemensOne Then
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
          Select Case n_data(3)
             Case 1
                Return 0
@@ -144,7 +143,10 @@ Public Class CN_Siemens
                Return 0
          End Select
       Else
-         Return CShort(M_MMFiles.SiemensRet.n_param2)
+         ' per verificare che la comunicazione funzioni correttamente
+         EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
+         Return M_MMFiles.read_active_mode()
+         'Return CShort(M_MMFiles.SiemensRet.n_param2)
       End If
    End Function
 

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 51                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -62,9 +62,14 @@ Public MustInherit Class CN_generico
       LaserTrac = 46
 
       XYJog = 47
-      ZJog = 48
-      BCJog = 49
+      ZCJog = 48
+      ZBJog = 49
       PowerON = 50
+      Remote = 51
+
+      Parking = 52
+      EnableZone = 53
+      EnablePC = 54
    End Enum
 
 #End Region
@@ -87,6 +92,8 @@ Public MustInherit Class CN_generico
 #Region " Interface"
 
    Friend m_IsSiemensOne As Boolean = False
+   Friend m_IsActiveModeSubscription As Boolean = False
+
    Friend m_DbVarPath As String = ""
 
    Public IsFlexiumPlus As Boolean = False
@@ -170,6 +177,9 @@ Public MustInherit Class CN_generico
    Public nDoorClosedState As Integer
    Public bLimitZState As Boolean
    Public bPowerOvr As Double
+   Public bParkingState As Boolean
+   Public nEnableZone As Integer
+   Public nEnablePc As Integer
    Public bHsm As Double
    Public bVacuumUp As Boolean
    Public bVacuumDown As Boolean
@@ -201,10 +211,11 @@ Public MustInherit Class CN_generico
 
    ' Nuovi di bottoni -------------------------------------------
    Public bXYJog As Boolean
-   Public bZJog As Boolean
-   Public bBCJog As Boolean
+   Public bZCJog As Boolean
+   Public bZBCJog As Boolean
 
    Public bPowerON As Boolean
+   Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
    Public nMachineMode As Integer

NcComm/M_MMFiles.vb

@@ -398,13 +398,35 @@ Module M_MMFiles
    End Function
 
    Function WriteCncMode(ByVal nmode As Short) As Short
-      'EgtOutLog("WriteCncMode start dell'm_mmFiles")
-      SiemensSend.n_Command = CMD.CMD_WriteCncMode
-      SiemensSend.n_param1 = nmode
-
-      execute_command()
-      'EgtOutLog("WriteCncMode end dell'm_mmFiles")
-      Return SiemensRet.n_result
+      Dim nNewWriteCNCMode As Integer = 0
+      If GetPrivateProfileInt(S_NCSIEMENS, K_NEWWRITECNCMODE, nNewWriteCNCMode, m_MainWindow.GetMachIniFile()) <> 0 Then
+         Dim s_var As String = String.Empty
+         GetPrivateProfileString(S_NCDATA, K_WRITECNCMODEVAR, "db11.dbx0", s_var, m_MainWindow.GetMachIniFile())
+         Select Case nmode
+            Case 0
+               ' Auto
+               s_var &= ".0"
+            Case 2
+               ' MDI
+               s_var &= ".1"
+            Case 7
+               ' manuale
+               s_var &= ".2"
+            Case Else
+               ' manuale
+               s_var &= ".2"
+         End Select
+         EgtOutLog("Nuova scrittura modo: case(" & nmode.ToString & ") -> " & s_var)
+         Return Write_var(s_var, CShort(1), CInt(1), 0, 0, "")
+      Else
+         'EgtOutLog("WriteCncMode start dell'm_mmFiles")
+         SiemensSend.n_Command = CMD.CMD_WriteCncMode
+         SiemensSend.n_param1 = nmode
+         EgtOutLog("Attivata modalità: " & SiemensSend.n_param1.ToString)
+         execute_command()
+         'EgtOutLog("WriteCncMode end dell'm_mmFiles")
+         Return SiemensRet.n_result
+      End If
 
    End Function
 
@@ -454,6 +476,7 @@ Module M_MMFiles
       SiemensSend.n_param1 = nChannel
 
       execute_command()
+
       'EgtOutLog("MDI_command end dell'm_mmFiles")
       Return SiemensRet.n_result
 
@@ -592,7 +615,6 @@ Module M_MMFiles
    '----------------------------------------------------------------------------------------------------------
    '
    Sub execute_command()
-
       Try
          ' Attesa eventuale busy iniziale
          Dim nCount As Integer = 0
@@ -619,25 +641,25 @@ Module M_MMFiles
          bEnd = False
          While Not bEnd
             Select Case nState
-            Case State.Command_on              ' alzato il comando attendo il busy
-               If SiemensRet.b_busy Then
-                  nState = State.Busy_On
-               Else
-                  System.Threading.Thread.Sleep(50)
-               End If
-            Case State.Busy_On                 ' trovato il busy abbasso il comando
-               SiemensSend.n_Flag = COMMAND_OFF ' abbasso il comando
-               ' scrivo !!!!!
-               Marshal.StructureToPtr(SiemensSend, pView, False)
-               nState = State.Command_off
-            Case State.Command_off             ' abbassato il comando attendo il busy basso
-               If SiemensRet.b_busy Then
-                  System.Threading.Thread.Sleep(50)
-               Else
-                  nState = State.Busy_Off
-               End If
-            Case State.Busy_Off
-               bEnd = True
+               Case State.Command_on              ' alzato il comando attendo il busy
+                  If SiemensRet.b_busy Then
+                     nState = State.Busy_On
+                  Else
+                     System.Threading.Thread.Sleep(50)
+                  End If
+               Case State.Busy_On                 ' trovato il busy abbasso il comando
+                  SiemensSend.n_Flag = COMMAND_OFF ' abbasso il comando
+                  ' scrivo !!!!!
+                  Marshal.StructureToPtr(SiemensSend, pView, False)
+                  nState = State.Command_off
+               Case State.Command_off             ' abbassato il comando attendo il busy basso
+                  If SiemensRet.b_busy Then
+                     System.Threading.Thread.Sleep(50)
+                  Else
+                     nState = State.Busy_Off
+                  End If
+               Case State.Busy_Off
+                  bEnd = True
             End Select
             ' controllo massimo numero di cicli
             nCount += 1
@@ -723,7 +745,8 @@ Module M_MMFiles
             CurrCN.d_Dvariable_values(n) = SiemensRet.d_interf_variable_values(n)
          Next
 
-         ' copy spindle current
+         ' copy spindle current: per debuggare errore di comunicazione 
+         'EgtOutLog("Spindle -d_interf_spindle_power-: " & SiemensRet.d_interf_spindle_power.ToString)
          CurrCN.d_spindle_power = SiemensRet.d_interf_spindle_power
 
          CurrCN.n_spindle_override(0) = SiemensRet.n_interf_spindle_override

NcComm/M_Num.vb

@@ -92,7 +92,7 @@ Namespace Num
       Private Const TIMEOUT As Short = 99
       Private Const SHORTSLEEPTIME As Short = 10
       Private Const LONGSLEEPTIME As Short = 40
-      Private Const SHORTSLEEPCOUNT As Short = 20
+      Private Const SHORTSLEEPCOUNT As Short = 100
       Private Const LONGSLEEPCOUNT As Short = 200
 
 #End Region
@@ -236,7 +236,7 @@ Namespace Num
          ' Detect and identify the Flexium CNC type
          sz_CncFxIdentifier = objDMainCncData.GetCncIdentifier()
          '           _txtGetCncIdentification.Invoke(DirectCast(Sub() _txtGetCncIdentification.Text = CncFxIdentifier, MethodInvoker))
-
+         EgtOutLog("Modello Flexium: " & sz_CncFxIdentifier)
          If sz_CncFxIdentifier = "Flexium 6" OrElse sz_CncFxIdentifier = "Flexium 8" OrElse sz_CncFxIdentifier = "Flexium 68" Then
             IsFlexiumPlus = False
          Else
@@ -1077,14 +1077,23 @@ Namespace Num
                Case CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
                   bVacuumOff = CBool(values(n))
 
-               Case CnData.XYJog     ' (46) 
+               Case CnData.XYJog     ' (47) 
                   bXYJog = CBool(values(n))
-               Case CnData.ZJog     ' (47)
-                  bZJog = CBool(values(n))
-               Case CnData.BCJog     ' (48)
-                  bBCJog = CBool(values(n))
-               Case CnData.PowerON     ' (49)
+               Case CnData.ZCJog     ' (48)
+                  bZCJog = CBool(values(n))
+               Case CnData.ZBJog     ' (49)
+                  bZBCJog = CBool(values(n))
+               Case CnData.PowerON     ' (50)
                   bPowerON = CBool(values(n))
+               Case CnData.Remote     ' (51)
+                  bRemote = CBool(values(n))
+
+               Case CnData.Parking     ' (52)
+                  bParkingState = CBool(values(n))
+               Case CnData.EnableZone     ' (53)
+                  nEnableZone = CInt(values(n))
+               Case CnData.EnablePC     ' (54)
+                  nEnablePc = CInt(values(n))
 
             End Select
          Next
@@ -1576,7 +1585,16 @@ Namespace Num
       End Sub
 
       Public Overrides Sub DPlcVariables_WriteVariables(sz_var_names As String, sz_values As String)
-         Dim _ret As Short = objDPlcVariables.WriteVariables(sz_var_names, CShort(sz_values))
+         Dim value As Short = 0
+         If Not Short.TryParse(sz_values, value) Then
+            If Not IsNothing( sz_values) then
+               EgtOutLog("Write variable: " & sz_var_names & ", value:" & sz_values & " failed!")
+            Else
+               EgtOutLog("Write variable: " & sz_var_names & ", value:nothing failed!")
+            End If
+            Return
+         End If
+         Dim _ret As Short = objDPlcVariables.WriteVariables(sz_var_names, value)
          If _ret <> 0 Then
             EgtOutLog("Scrittura " & sz_var_names & " fallita")
          Else

OmagCUT.vbproj

@@ -166,6 +166,9 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
+      <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
@@ -173,6 +176,9 @@
     <Compile Include="DirectCuts\SingleCutAuto.xaml.vb">
       <DependentUpon>SingleCutAuto.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DirectCuts\SingleDrillUC.xaml.vb">
+      <DependentUpon>SingleDrillUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\AlzFrontUC.xaml.vb">
       <DependentUpon>AlzFrontUC.xaml</DependentUpon>
     </Compile>
@@ -193,9 +199,23 @@
       <DependentUpon>CadCutPageUC.xaml</DependentUpon>
     </Compile>
     <Compile Include="CAM\CamAuto.vb" />
+    <Compile Include="Machine\ImportExportMachiningWindowWD.xaml.vb">
+      <DependentUpon>ImportExportMachiningWindowWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Machine\ImportExportToolWD.xaml.vb">
+      <DependentUpon>ImportExportToolWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Machine\WaterjetDbWindowVM.vb" />
+    <Compile Include="Machine\WaterJetPageVM.vb" />
+    <Compile Include="Machine\WaterJetPageUC.xaml.vb">
+      <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Project\StartLauncheWD.xaml.vb">
       <DependentUpon>StartLauncheWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Project\CicloStartWD.xaml.vb">
+      <DependentUpon>CicloStartWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -389,6 +409,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -397,6 +421,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\SingleDrillUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\AlzFrontUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -421,7 +449,20 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="Machine\ImportExportMachiningWindowWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Machine\ImportExportToolWD.xaml">
+      <SubType>Designer</SubType>
+    </Page>
+    <Page Include="Machine\WaterJetPageUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Project\StartLauncheWD.xaml">
+    </Page>
+    <Page Include="Project\CicloStartWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
@@ -1028,6 +1069,205 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\SlabId.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Nuovo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Carica.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva-con-nome.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\CSV.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Vein-match.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DatiMacchina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DB-lavorazioni.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DB-utensili.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Macchina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Movimento-manuale.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-singolo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-multiplo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-griglia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Spianatura.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Copia-dima.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Sezione-cornice.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Foro-singolo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P1_P2.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Esegui.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Simula.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Test-lama.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\File-CSV.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\ON_OFF-singolo-taglio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-ON.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-OFF.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-centro-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-centro-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Modifica-inizio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Modifica-fine.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inverti.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Pausa-ON_OFF.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-tutti-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-tutti-centro.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-tutti-centro.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-tutti-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-allunga.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parcheggia-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inserisci-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Elimina-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Seleziona-tutto.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Deseleziona-tutto.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Arco.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Linea.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Rimuovi-segmento.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Chiudi.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva-taglio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Take-point.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Specchia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Rimuovi_elimina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\XYJog.png" />
+    <Resource Include="Resources\NewIcons\ZBJog.png" />
+    <Resource Include="Resources\NewIcons\ZCJog.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Lucidatura.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P1.png" />
+    <Resource Include="Resources\NewIcons\Acquisisci-P2.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\Spiral.png" />
+    <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli_delete.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -46,6 +46,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>
@@ -77,7 +78,7 @@
     <BitmapImage x:Key="ZoomOutImg" UriSource="Resources/NewIcons/Zoom-.png"></BitmapImage>
     <BitmapImage x:Key="ZoomWinImg" UriSource="Resources/NewIcons/ZoomWIn.png"></BitmapImage>
     <BitmapImage x:Key="LogoOmagImg" UriSource="Resources/NewIcons/logo-OmCut.png"></BitmapImage>
-    
+  
     <!--Nuove icone da sistemare-->
     <BitmapImage x:Key="AvantiVeloceImg" UriSource="Resources/NewIcons/AvantiVeloce.png"></BitmapImage>
     <BitmapImage x:Key="IndietroVeloceImg" UriSource="Resources/NewIcons/IndietroVeloce.png"></BitmapImage>
@@ -88,6 +89,84 @@
     <BitmapImage x:Key="StopImg" UriSource="Resources/NewIcons/Stop.png"></BitmapImage>
     <BitmapImage x:Key="VacuumImg" UriSource="Resources/NewIcons/Vacuum.png"></BitmapImage>
 
+    <!--General-->
+    <BitmapImage x:Key="EseguiImg" UriSource="Resources/NewIcons/Esegui.png"></BitmapImage>
+    <BitmapImage x:Key="SimulaImg" UriSource="Resources/NewIcons/Simula.png"></BitmapImage>
+    
+    <!--ProjectManager-->
+    <BitmapImage x:Key="NuovoImg" UriSource="Resources/NewIcons/Nuovo.png"></BitmapImage>
+    <BitmapImage x:Key="CaricaImg" UriSource="Resources/NewIcons/Carica.png"></BitmapImage>
+    <BitmapImage x:Key="SalvaImg" UriSource="Resources/NewIcons/Salva.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-con-nomeImg" UriSource="Resources/NewIcons/Salva-con-nome.png"></BitmapImage>
+    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/File-CSV.png"></BitmapImage>
+    <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
+    <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
+    <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
+    
+    <!--Machine-->
+    <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
+    <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
+    <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
+    <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
+    <BitmapImage x:Key="LucidaturaImg" UriSource="Resources/NewIcons/Lucidatura.png"></BitmapImage>
+    
+    
+    <!--Direct cuts-->
+    <BitmapImage x:Key="Taglio-grigliaImg" UriSource="Resources/NewIcons/Taglio-griglia.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-multiploImg" UriSource="Resources/NewIcons/Taglio-multiplo.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-singoloImg" UriSource="Resources/NewIcons/Taglio-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="Foro-singoloImg" UriSource="Resources/NewIcons/Foro-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="SpianaturaImg" UriSource="Resources/NewIcons/Spianatura.png"></BitmapImage>
+    <BitmapImage x:Key="Movimento-manualeImg" UriSource="Resources/NewIcons/Movimento-manuale.png"></BitmapImage>
+    <BitmapImage x:Key="Copia-dimaImg" UriSource="Resources/NewIcons/Copia-dima.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1_P2Img" UriSource="Resources/NewIcons/Acquisisci-P1_P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1Img" UriSource="Resources/NewIcons/Acquisisci-P1.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P2Img" UriSource="Resources/NewIcons/Acquisisci-P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-PImg" UriSource="Resources/NewIcons/Acquisisci-P.png"></BitmapImage>
+    <BitmapImage x:Key="ArcoImg" UriSource="Resources/NewIcons/Arco.png"></BitmapImage>
+    <BitmapImage x:Key="LineaImg" UriSource="Resources/NewIcons/Linea.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi-segmentoImg" UriSource="Resources/NewIcons/Rimuovi-segmento.png"></BitmapImage>
+    <BitmapImage x:Key="ChiudiImg" UriSource="Resources/NewIcons/Chiudi.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-taglioImg" UriSource="Resources/NewIcons/Salva-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Take-pointImg" UriSource="Resources/NewIcons/Take-point.png"></BitmapImage>
+
+    <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+
+
+    <!--Frame-->
+    <BitmapImage x:Key="Sezione-corniceImg" UriSource="Resources/NewIcons/Sezione-cornice.png"></BitmapImage>
+    <BitmapImage x:Key="SpecchiaImg" UriSource="Resources/NewIcons/Specchia.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi_eliminaImg" UriSource="Resources/NewIcons/Rimuovi_elimina.png"></BitmapImage>
+
+    <!--Machinig-->
+    <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Centro-FuoriImg" UriSource="Resources/NewIcons/Fine-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-InizioImg" UriSource="Resources/NewIcons/Modifica-inizio.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-FineImg" UriSource="Resources/NewIcons/Modifica-fine.png"></BitmapImage>
+    <BitmapImage x:Key="InvertiImg" UriSource="Resources/NewIcons/Inverti.png"></BitmapImage>
+    <BitmapImage x:Key="Pausa-ON_OFFImg" UriSource="Resources/NewIcons/Pausa-ON_OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-fuoriImg" UriSource="Resources/NewIcons/Inizio-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-centroImg" UriSource="Resources/NewIcons/Inizio-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-fuoriImg" UriSource="Resources/NewIcons/Fine-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-centroImg" UriSource="Resources/NewIcons/Fine-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
+
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Roboto</FontFamily>
 
     <SolidColorBrush x:Key="OmagCut_TreeViewBackGroundColor" Color="#636974" />
@@ -128,12 +207,19 @@
     </Style>
 
     <Style x:Key="OmagCut_Border" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
-        <!--<Setter Property="Background" Value="#636974"/>
-        <Setter Property="BorderBrush" Value="#636974"/>-->
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
         <Setter Property="Background" Value="#3C3F48"/>
         <Setter Property="BorderBrush" Value="#3C3F48"/>
     </Style>
 
+    <Style x:Key="OmagCut_MachiningBorder" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
+        <Setter Property="Background" Value="{StaticResource OmagCut_Blue}"/>
+        <Setter Property="BorderBrush" Value="#3C3F48"/>
+    </Style>
+
     <Style x:Key="OmagCut_EmptyBorder" TargetType="{x:Type Border}">
         <Setter Property="BorderThickness" Value="{StaticResource BorderThickness}"/>
         <Setter Property="CornerRadius" Value="{DynamicResource EmptyBorder_CornerRadius}"/>
@@ -250,15 +336,40 @@
         <Setter Property="Foreground" Value="White"/>
     </Style>
 
+    <Style x:Key="OmagCut_WjDbRightGrayGradientYellowTextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button_Wrap}">
+        <Setter Property="Background" Value="#1C1D22"/>
+        <Setter Property="BorderBrush" Value="#1C1D22"/>
+        <Setter Property="Foreground" Value="White"/>
+        <Setter Property="FontSize" Value="15"/>
+    </Style>
+
     <Style x:Key="OmagCut_YellowIconToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource  OmagCut_ToggleButton}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#636974"/>
         <Setter Property="BorderBrush" Value="#636974"/>
         <Setter Property="FontSize" Value="{StaticResource FontSize_UpperCaseCharacter}"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type ToggleButton}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
         <Style.Triggers>
             <Trigger Property="IsChecked" Value="True">
                 <Setter Property="ToggleButton.Background" Value="#145993" />
             </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_Blue}"/>
+            </Trigger>
         </Style.Triggers>
+        
     </Style>
 
     <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
@@ -438,10 +549,30 @@
     </Style>
 
     <Style x:Key="OmagCut_YellowIconButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#1C1D22"/>
         <Setter Property="BorderBrush" Value="#1C1D22"/>
         <!--<Setter Property="BorderBrush" Value="{StaticResource OmagCut_Yellow}"/>-->
-        <Setter Property="Foreground" Value="White"/>
+        <Setter Property="Foreground" Value="LightGray"/>
+
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_DarkGray}"/>
+            </Trigger>
+        </Style.Triggers>
     </Style>
 
     <Style x:Key="OmagCut_RightGrayYellowTextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource  OmagCut_ToggleButton_Wrap}">
@@ -459,10 +590,29 @@
     </Style>
 
     <Style x:Key="OmagCut_GradientBlueIconButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#2D3036"/>
         <Setter Property="BorderBrush" Value="#2D3036"/>
-        <!--<Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>-->
+        <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>
         <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_Blue}"/>
+            </Trigger>
+        </Style.Triggers>
     </Style>
 
     <Style x:Key="OmagCut_CenteredLowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">

OmagCUTDictionary.xaml

@@ -116,6 +116,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>
@@ -155,6 +156,88 @@
     <BitmapImage x:Key="StopImg" UriSource="Resources/Stop.png"></BitmapImage>
     <BitmapImage x:Key="VacuumImg" UriSource="Resources/Vacuum.png"></BitmapImage>
 
+    <!--sono le stesse immagini usate per l'interfaccia Dark-->
+    <!--General-->
+    <BitmapImage x:Key="EseguiImg" UriSource="Resources/NewIcons/Esegui.png"></BitmapImage>
+    <BitmapImage x:Key="SimulaImg" UriSource="Resources/NewIcons/Simula.png"></BitmapImage>
+
+    <!--ProjectManager-->
+    <BitmapImage x:Key="NuovoImg" UriSource="Resources/NewIcons/Nuovo.png"></BitmapImage>
+    <BitmapImage x:Key="CaricaImg" UriSource="Resources/NewIcons/Carica.png"></BitmapImage>
+    <BitmapImage x:Key="SalvaImg" UriSource="Resources/NewIcons/Salva.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-con-nomeImg" UriSource="Resources/NewIcons/Salva-con-nome.png"></BitmapImage>
+    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/File-CSV.png"></BitmapImage>
+    <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
+    <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
+    <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
+
+    <!--Machine-->
+    <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
+    <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
+    <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
+    <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
+    <BitmapImage x:Key="LucidaturaImg" UriSource="Resources/NewIcons/Lucidatura.png"></BitmapImage>
+
+
+    <!--Direct cuts-->
+    <BitmapImage x:Key="Taglio-grigliaImg" UriSource="Resources/NewIcons/Taglio-griglia.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-multiploImg" UriSource="Resources/NewIcons/Taglio-multiplo.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-singoloImg" UriSource="Resources/NewIcons/Taglio-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="Foro-singoloImg" UriSource="Resources/NewIcons/Foro-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="SpianaturaImg" UriSource="Resources/NewIcons/Spianatura.png"></BitmapImage>
+    <BitmapImage x:Key="Movimento-manualeImg" UriSource="Resources/NewIcons/Movimento-manuale.png"></BitmapImage>
+    <BitmapImage x:Key="Copia-dimaImg" UriSource="Resources/NewIcons/Copia-dima.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1_P2Img" UriSource="Resources/NewIcons/Acquisisci-P1_P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1Img" UriSource="Resources/NewIcons/Acquisisci-P1.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P2Img" UriSource="Resources/NewIcons/Acquisisci-P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-PImg" UriSource="Resources/NewIcons/Acquisisci-P.png"></BitmapImage>
+    <BitmapImage x:Key="ArcoImg" UriSource="Resources/NewIcons/Arco.png"></BitmapImage>
+    <BitmapImage x:Key="LineaImg" UriSource="Resources/NewIcons/Linea.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi-segmentoImg" UriSource="Resources/NewIcons/Rimuovi-segmento.png"></BitmapImage>
+    <BitmapImage x:Key="ChiudiImg" UriSource="Resources/NewIcons/Chiudi.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-taglioImg" UriSource="Resources/NewIcons/Salva-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Take-pointImg" UriSource="Resources/NewIcons/Take-point.png"></BitmapImage>
+
+    <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+
+
+    <!--Frame-->
+    <BitmapImage x:Key="Sezione-corniceImg" UriSource="Resources/NewIcons/Sezione-cornice.png"></BitmapImage>
+    <BitmapImage x:Key="SpecchiaImg" UriSource="Resources/NewIcons/Specchia.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi_eliminaImg" UriSource="Resources/NewIcons/Rimuovi_elimina.png"></BitmapImage>
+
+    <!--Machinig-->
+    <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliWJImg" UriSource="Resources/NewIcons/Ponticelli.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliDeleteWJImg" UriSource="Resources/NewIcons/Ponticelli_delete.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Centro-FuoriImg" UriSource="Resources/NewIcons/Fine-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-InizioImg" UriSource="Resources/NewIcons/Modifica-inizio.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-FineImg" UriSource="Resources/NewIcons/Modifica-fine.png"></BitmapImage>
+    <BitmapImage x:Key="InvertiImg" UriSource="Resources/NewIcons/Inverti.png"></BitmapImage>
+    <BitmapImage x:Key="Pausa-ON_OFFImg" UriSource="Resources/NewIcons/Pausa-ON_OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-fuoriImg" UriSource="Resources/NewIcons/Inizio-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-centroImg" UriSource="Resources/NewIcons/Inizio-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-fuoriImg" UriSource="Resources/NewIcons/Fine-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-centroImg" UriSource="Resources/NewIcons/Fine-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
+
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
 
     <SolidColorBrush x:Key="OmagCut_TreeViewBackGroundColor" Color="#FFFFFFFF" />
@@ -173,7 +256,14 @@
       <Setter Property="Margin" Value="1" />
    </Style>
 
-   <!--Border-->
+    <Style x:Key="OmagCut_MachiningBorder" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
+        <Setter Property="Background" Value="{StaticResource OmagCut_Yellow}"/>
+        <Setter Property="BorderBrush" Value="#3C3F48"/>
+    </Style>
+
+    <!--Border-->
    <Style x:Key="OmagCut_Border" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
       <Setter Property="Background" Value="{StaticResource OmagCut_LightGray}"/>
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>
@@ -386,6 +476,13 @@
       </Style.Triggers>
    </Style>
 
+    <Style x:Key="OmagCut_WjDbRightGrayGradientYellowTextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button_Wrap}">
+        <Setter Property="Background" Value="{StaticResource OmagCut_RightGradientGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Yellow}"/>
+        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+        <Setter Property="FontSize" Value="15"/>
+    </Style>
+
    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--CheckBox-->
@@ -921,7 +1018,16 @@
       <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" />
    </DataTemplate>
 
-   <!--DataTemplate testo ed immagine-->
+   <DataTemplate x:Key="FileNameLsBxItem">
+       <DockPanel>
+           <TextBlock Text="{Binding GraphicName}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" 
+                      DockPanel.Dock="Left" Width="130"/>
+           <TextBlock Text="{Binding sDate}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+                      DockPanel.Dock="Right" />
+       </DockPanel>
+   </DataTemplate>
+
+    <!--DataTemplate testo ed immagine-->
    <DataTemplate x:Key="DataTemplateItem">
       <Grid >
          <Grid.ColumnDefinitions>
@@ -1105,7 +1211,21 @@
       <Setter Property="KeyboardDimension" Value="300"/>
    </Style>
 
-   <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">
+    <Style x:Key="OmagCut_CalculatorParamWjTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
+        <Setter Property="Width" Value="80"/>
+        <Setter Property="Keyboard" Value="Calculator"/>
+        <Setter Property="KeyboardDimension" Value="300"/>
+        <Setter Property="IsHitTestVisible" Value="False" />
+        <Style.Triggers>
+            <DataTrigger Binding="{Binding IsSelected, RelativeSource={RelativeSource FindAncestor, 
+                                                                                      AncestorType={x:Type ListBoxItem}, AncestorLevel=1}}"
+                         Value="True">
+                <Setter Property="IsHitTestVisible" Value="True" />
+            </DataTrigger>
+        </Style.Triggers>
+    </Style>
+
+    <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">
       <Setter Property="Margin" Value="{DynamicResource MachToolLeftTextBoxNoBorder_Margin}"/>
    </Style>
 
@@ -1139,6 +1259,7 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
+        <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />

OmagCUTDictionary.xaml.vb

@@ -50,6 +50,7 @@ Namespace TreeViewItem
       Private m_sPictureString As String
       Private m_nTType As Integer
       Private m_Items As ObservableCollection(Of CustomItem)
+      Friend m_IsValidTool As Boolean
 
       Public ReadOnly Property PictureString As String
          Get
@@ -86,12 +87,13 @@ Namespace TreeViewItem
       'Private m_sTitle As String
       Private m_nType As Integer
 
+      'Private m_sName As String
       'Public Property Name As String
       '   Get
-      '      Return m_sTitle
+      '      Return m_sName
       '   End Get
       '   Set(value As String)
-      '      m_sTitle = value
+      '      m_sName = value
       '   End Set
       'End Property
 
@@ -101,11 +103,31 @@ Namespace TreeViewItem
          End Get
       End Property
 
+      Friend m_IsValidTool As Boolean = True
+
+      Public Property IsValidTool As Boolean
+         Get
+            Return m_IsValidTool
+         End Get
+         Set(value As Boolean)
+            If value <> m_IsValidTool Then
+               m_IsValidTool = value
+               NotifyPropertyChanged("ToolColor")
+            End If
+         End Set
+      End Property
+
       Sub New(Title As String, nType As Integer)
          Me.Name = Title
          m_nType = nType
       End Sub
 
+      Sub New(sName As String, nType As Integer, bIsValidTool As Boolean)
+         MyBase.Name = sName
+         m_nType = nType
+         m_IsValidTool = bIsValidTool
+      End Sub
+
    End Class
 
    Public Class PartCathegoryItem

Options/OptionsPageUC.xaml

@@ -537,28 +537,54 @@
 
         </GroupBox>
 
+        <!--Selezione il tipo di avvio del programma-->
+        <GroupBox Name="StartLauncherGpBx"
+                Grid.Column="3" Grid.RowSpan="3" Grid.ColumnSpan="1"
+                Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="4*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.25*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.25*"/>
+                </Grid.RowDefinitions>
 
+                <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+            </Grid>
+        </GroupBox>
+       
         <GroupBox Name="FeedbackGpBx"
                 Grid.Column="4" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-         <Grid>
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.25*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.25*"/>
-            </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="0.5*"/>
-                    </Grid.RowDefinitions>
-
-                    <Button Name="FeedbackBtn"
-                          Grid.Row="1" Grid.Column="1"
-                          Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-         </Grid>
+            <Grid>
+                <Grid.ColumnDefinitions>
+                   <ColumnDefinition Width="0.25*"/>
+                   <ColumnDefinition Width="1*"/>
+                   <ColumnDefinition Width="0.25*"/>
+                </Grid.ColumnDefinitions>
+                        <Grid.RowDefinitions>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="1*"/>
+                            <RowDefinition Height="0.5*"/>
+                        </Grid.RowDefinitions>
+                
+                        <Button Name="FeedbackBtn"
+                              Grid.Row="1" Grid.Column="1"
+                              Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </GroupBox>
 

Options/OptionsPageUC.xaml.vb

@@ -9,6 +9,9 @@ Public Class OptionsPageUC
    Private UnitsList() As String = {"inch", "mm"}
    Private ThemesList() As String = {"Classic", "Dark"}
 
+   ' "Last Project", "New Project", "Open Folder", "Show Window"
+   Private StartLauncherList() As String = {EgtMsg(91013), EgtMsg(91014), EgtMsg(91015), EgtMsg(91016)}
+
    Private Sub OptionsPageUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
       ' Associazione della lista linguaggi alla combobox
@@ -28,6 +31,11 @@ Public Class OptionsPageUC
       ThemesCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_THEME, 0, m_MainWindow.GetIniFile())
       Themes_StartUp()
 
+      ' Carico la lista con il tipo di avvio
+      StartLauncherCmBx.ItemsSource = StartLauncherList
+      ' 0-New, 1-Last, 2-Open, 3-Window
+      StartLauncherCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile())
+
       ' Rendo invisibile il GroupBox dei Temi la versione corrente
       ' ThemesGpBx.Visibility = Windows.Visibility.Collapsed
 
@@ -102,7 +110,7 @@ Public Class OptionsPageUC
       ToleranceEMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 21)
       AffondamentoMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 27)
       LarghezzaMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 28)
-
+      StartLauncherGpBx.Header = EgtMsg(91009)
    End Sub
 
    Private Sub UpdateSlabDxf()
@@ -304,6 +312,11 @@ Public Class OptionsPageUC
       WritePrivateProfileString(S_GENERAL, K_MESSAGES, m_MainWindow.m_CurrLanguage.LanguageName, m_MainWindow.GetIniFile())
    End Sub
 
+   Private Sub StartLauncherCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles StartLauncherCmBx.SelectionChanged
+      Dim nIndex As Integer = StartLauncherCmBx.SelectedIndex
+      WritePrivateProfileString(S_GENERAL, K_AUTOLOADLASTPROJ, StartLauncherCmBx.SelectedIndex, m_MainWindow.GetIniFile())
+   End Sub
+
    Private Sub UnitsOfMeasureCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles UnitsOfMeasureCmBx.SelectionChanged
       Dim bMM As Boolean = (UnitsOfMeasureCmBx.SelectedIndex <> 0)
       EgtSetUiUnits(bMM)

Project/CicloStartWD.xaml

@@ -0,0 +1,50 @@
+<Window x:Class="CicloStartWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="200" Width="426.5" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="CicloStartTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+ 
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

Project/CicloStartWD.xaml.vb

@@ -0,0 +1,38 @@
+Imports EgtUILib
+Imports EgtWPFLib
+Imports System.IO
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+Class CicloStartWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Public Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub StartLauncherWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' imopposto il messaggio di avvio
+      CicloStartTxbl.Text = EgtMsg(91130)   ' Esegui programma?
+   End Sub
+
+   ' creo un progetto nuovo
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      Me.Close()
+   End Sub
+
+   ' Ultimo progetto
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      ' Aspetto e lo avvio
+      System.Threading.Thread.Sleep(300)
+      ' avvio il ciclo start della macchina
+      m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
+      Me.Close()
+   End Sub
+
+End Class

Project/CurrentProjectPageUC.xaml

@@ -30,7 +30,7 @@
       </Grid>
 
       <!-- Definizione della Grid laterale -->
-      <Grid Grid.RowSpan="3">
+        <Grid Grid.RowSpan="3">
          <Grid.RowDefinitions>
             <RowDefinition Height="2*"/>
             <RowDefinition Height="7*"/>
@@ -38,7 +38,7 @@
          </Grid.RowDefinitions>
 
          <!-- Definizione della Grid con le caratteristiche del progetto -->
-            <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_Border}" Grid.Row="0" >
+            <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_MachiningBorder}" Grid.Row="0" >
                 <Grid >
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="1*"/>

Project/CurrentProjectPageUC.xaml.vb

@@ -6,7 +6,6 @@ Imports EgtWPFLib5
 
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
-   Friend Event OnMouseDownSceneSelCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
@@ -24,8 +23,8 @@ Public Class CurrentProjectPageUC
    ' Dati del grezzo
    Friend m_nRawId As Integer = GDB_ID.NULL
    Friend m_dRawHeight As Double
-   ' pagina impostata per selezionare una lavorazione
-   Friend m_bSelectCurv As Boolean = False
+   '' Flag per impostata per selezionare di una curva
+   'Friend m_bSelectCurv As Boolean = False
    ' Costanti tipo progetto
    Friend Enum PRJ_TYPE As Integer
       EMPTY = 0
@@ -93,6 +92,14 @@ Public Class CurrentProjectPageUC
          Dim DstLnColor As New Color3d(255, 0, 0)
          GetPrivateProfileColor(S_SCENE, K_DISTLINE, DstLnColor, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetDistLineMaterial(DstLnColor)
+
+         ''imposto il colore di sfondo del progetto
+         'Dim BAckTopColor As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackTop", BAckTopColor, m_MainWindow.GetIniFile())
+         'Dim BackBottom As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackBottom", BackBottom, m_MainWindow.GetIniFile())
+         'CurrentProjectScene.SetViewBackground(BAckTopColor, BackBottom)
+
          ' imposto parametri OpenGL
          Dim nDriver As Integer = GetPrivateProfileInt(S_OPENGL, K_DRIVER, 3, m_MainWindow.GetIniFile())
          Dim b2Buff As Boolean = (GetPrivateProfileInt(S_OPENGL, K_DOUBLEBUFFER, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -173,41 +180,12 @@ Public Class CurrentProjectPageUC
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
 
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-         '' apro la finstra di selezione di avvio del programma
-         'StartProgram()
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-
-         ' Se richiesto, carico ultimo progetto
-         Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         If bAutoLoadLast Then
-            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-            Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-            If Not LoadProject(sPath, False) Then
-               NewProject()
-            End If
-            EgtResetModified()
-            'Altrimenti ne imposto uno nuovo
-         Else
-            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-            NewProject()
-         End If
-
-         '' creo nuovo progetto
+         ' creo nuovo progetto
+         m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
 
          ' Nascondo progress per fotografia
          PhotoProgress.Visibility = Windows.Visibility.Hidden
-         ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-            m_MainWindow.CadCutBtn.IsChecked = True
-         Else
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-            m_MainWindow.FrameCutBtn.IsChecked = True
-         End If
 
       Else
          EgtSetCurrentContext(CurrentProjectScene.GetCtx())
@@ -227,16 +205,18 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Public Sub StartProgram()
+      ' leggo il tipo di avvio del programma: 0-New, 1-Last, 2-Open, 3-Window
+      Dim nStart As Integer = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile())
+
       Dim MyStartLancherWD As New StartLauncherWD(m_MainWindow)
-      MyStartLancherWD.ShowDialog()
-
-      ' Se richiesto, carico ultimo progetto
-      Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-      m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-      ' se ultimo progetto
-      If MyStartLancherWD.CurrSelection = 2 Then
-         bAutoLoadLast = True
+      ' mostro la finestra di avvio solo se configirato (= 3)
+      If nStart = MODE_LAUNCHER.ShowWindow Then
+         MyStartLancherWD.ShowDialog()
+      Else
+         MyStartLancherWD.CurrSelection = nStart
+      End If
 
+      If MyStartLancherWD.CurrSelection = MODE_LAUNCHER.LastProject Then
          ' Stampo il numero di progetto con 4 decimali: 12 -> "0012"
          Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
          ' provo ad aprire l'ultimo progetto modificato
@@ -249,44 +229,92 @@ Public Class CurrentProjectPageUC
          End If
          EgtResetModified()
 
-         ' apro il file selezionato all'avvio
-      ElseIf MyStartLancherWD.CurrSelection = 3 Then
-         If Not LoadProject(MyStartLancherWD.SelPath, False) Then
-            ' altrimenti apro un nuovo progetto
-            NewProject()
-         Else
-            ' salvo il nome del file caricato
-            m_MruFiles.Add(MyStartLancherWD.SelPath)
-         End If
-         EgtResetModified()
-
-         ' se nuovo progetto o naviga direttorio
-      ElseIf MyStartLancherWD.CurrSelection = 1 Or MyStartLancherWD.CurrSelection = 0 Then
-         bAutoLoadLast = False
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.NewProject Then
          NewProject()
+
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.OpenFolder Then
+         NewProject()
+         EgtSetCurrentContext(CurrentProjectScene.GetCtx())
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         ' Cancello eventuali messaggi
+         ClearMessage()
+         ' Imposto la pagina attualmente attiva come Previous
+         m_MainWindow.m_PrevActivePage = m_MainWindow.m_ActivePage
+         ' Passo alla pagina di apertura con preview
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
+         m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+         ' inizializzo gli oggetti della pagina (non passo dalla funzione Load!)
+         m_MainWindow.m_CadCutPageUC.m_ProjectMgr.SetReference()
+
+         ' seleziono il file dalla lista della finestra (= 4) 
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.SelectedProject Then
+         NewProject()
+         Dim sCurrDir As String = Path.GetDirectoryName(MyStartLancherWD.SelPath)
+         Dim sCurrFile As String = Path.GetFileName(MyStartLancherWD.SelPath)
+
+         If Not LoadProject(sCurrDir & "\" & sCurrFile) Then
+            NewProject()
+            m_MruFiles.Remove(sCurrDir & "\" & sCurrFile)
+         Else
+            ' Verifico se file salvato con nome guardando il nome della cartella in cui si trova
+            Dim sSaveNameDir As String = String.Empty
+            GetPrivateProfileString(S_GENERAL, K_SAVENAMEDIR, "", sSaveNameDir, m_MainWindow.GetIniFile())
+            If sCurrDir = sSaveNameDir Then
+               WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, sCurrFile.Substring(0, sCurrFile.Length - 4), m_MainWindow.GetIniFile())
+               ' Salvo equivalente con indice
+               SetNextProjectIndex()
+               SaveProject()
+            Else
+               WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, String.Empty, m_MainWindow.GetIniFile())
+            End If
+            ' Salvo path di carico del progetto
+            If sCurrDir <> m_MainWindow.GetSaveDir() And sCurrDir <> sSaveNameDir Then
+               SetLoadPath(sCurrDir & "\" & sCurrFile)
+            End If
+            m_MruFiles.Add(sCurrDir & "\" & sCurrFile)
+         End If
       End If
 
-      '' Nascondo progress per fotografia
-      'PhotoProgress.Visibility = Windows.Visibility.Hidden
-      '' Carico sottopagina opportuna
-      'If GetProjectType() <> PRJ_TYPE.FRAMES Then
-      '   CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-      '   m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-      '   m_MainWindow.CadCutBtn.IsChecked = True
-      'Else
-      '   CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-      '   m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-      '   m_MainWindow.FrameCutBtn.IsChecked = True
-      'End If
+      ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
+      If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
+         ' Carico sottopagina opportuna
+         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+            m_MainWindow.CadCutBtn.IsChecked = True
+         Else
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
+
+
+   End Sub
+
+   ' questo metodo è direttamente richiamato in caso di selezione della regione sinistra della pagina
+   Private Sub ChooseMachining() Handles CurrProjGrid.MouseDown
+      ' Apro pagina di selezione della lavorazione prima di chiudere il grezzo
+      Dim m_ChooseMachiningPage = New ChooseMachining(m_MainWindow)
+      ' apro la finestra per la selezione delle lavorazioni
+      m_ChooseMachiningPage.ShowDialog()
+      ' se seleziono "Ok" allora resetto tutte le lavorazioni del progetto
+      If m_ChooseMachiningPage.DialogResult Then
+         EgtSetCurrentContext(CurrentProjectScene.GetCtx())
+         ' Cancello eventuali messaggi
+         ClearMessage()
+         ' Ricalcolo tutte le lavorazioni
+         Dim nWarn As Integer = 0
+         ResetAllMachinings(nWarn)
+         If nWarn = 1 Then SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+         ' Aggiorno visualizzazione
+         EgtDraw()
+      End If
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseDownScene
-      If m_bSelectCurv Then
-         RaiseEvent OnMouseDownSceneSelCurv(sender, e)
-      Else
-         RaiseEvent OnMouseDownScene(sender, e)
-      End If
-
+      RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
@@ -390,7 +418,7 @@ Public Class CurrentProjectPageUC
       Return True
    End Function
 
-   Friend Function AdjustAdditionalTable() As Boolean
+   Friend Function AdjustAdditionalTable( Optional bForced As Boolean = False) As Boolean
       ' Recupero altezza sottotavola corrente
       Dim nFixtId As Integer = EgtGetFirstNameInGroup(EgtGetFirstMachGroup(), MACH_FIXT_GROUP)
       Dim nAddTabId As Integer = EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE)
@@ -402,7 +430,7 @@ Public Class CurrentProjectPageUC
       End If
       ' Se valore cambiato, aggiorno...
       Dim dDeltaZ As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable - dCurrAddTab
-      If Math.Abs(dDeltaZ) > EPS_SMALL Then
+      If Math.Abs(dDeltaZ) > EPS_SMALL Or bForced Then
          AddAdditionalTable()
          UpdateAllRawsZ(dDeltaZ)
          If GetPhoto() <> GDB_ID.NULL Then
@@ -410,6 +438,12 @@ Public Class CurrentProjectPageUC
             UpdateContour()
             If EgtGetRawPartCount() > 0 Then
                ShowPhoto(False)
+               Dim nRawGrpId As Integer = EgtGetFirstRawPart()
+               While nRawGrpId <> GDB_ID.NULL
+                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup( nRawGrpId, NAME_RAW_SOLID)
+                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName( nRawSolidId, PHOTO_NAME)
+                  nRawGrpId = EgtGetNextRawPart( nRawGrpId)
+               End While
             End If
          End If
       End If
@@ -423,16 +457,28 @@ Public Class CurrentProjectPageUC
       EgtErase(EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE))
       ' Altezza eventuale tavola aggiuntiva
       Dim dAddTable As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
-      ' Se non esiste sovratavola, esco subito
+      ' Se non richiesta sovratavola, non c'è altro da fare ed esco
       If dAddTable < 10 * EPS_SMALL Then Return True
       ' Recupero box tavola
       Dim ptMin, ptMax As Point3d
       EgtGetTableArea(1, ptMin, ptMax)
-      ' Aggiungo sovratavola nel gruppo dei bloccaggi
-      ptMax.z -= DELTAZ_ADDTAB
-      ptMin.z = ptMax.z
-      ptMax.z += dAddTable
-      Dim nAddTabId As Integer = EgtCreateSurfTmBBox(nFixtId, ptMin, ptMax, GDB_RT.GLOB)
+      ' Nuova geometria
+      Dim nAddTabId As Integer = GDB_ID.NULL
+      ' Se esiste geometria di riferimento
+      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      If nRefAddTabId <> GDB_ID.NULL Then
+         nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
+         EgtSetStatus( nAddTabId, GDB_ST.ON_)
+         EgtScale( nAddTabId, new Frame3d( ptMin), 1, 1, dAddTable / 10)
+      ' altrimenti la creo
+      Else
+         ' Aggiungo sovratavola nel gruppo dei bloccaggi
+         ptMax.z -= DELTAZ_ADDTAB
+         ptMin.z = ptMax.z
+         ptMax.z += dAddTable
+         nAddTabId = EgtCreateSurfTmBBox(nFixtId, ptMin, ptMax, GDB_RT.GLOB)
+      End If
+      ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
       EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
@@ -462,6 +508,20 @@ Public Class CurrentProjectPageUC
       UpdateHeightTxBx()
       ' aggiorno materiale
       m_MainWindow.m_CurrentMachine.SetCurrMatByName(GetProjectMaterial())
+      ' aggiorno altezza sovaratavola
+      If GetPrivateProfileInt(S_GENERAL, "AdditionalTableByProj", 0, m_sIniFile) = 1 Then
+         ' leggo il valore OrigiAdditionalTable
+         Dim dValue As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
+         Select Case GetCurrentTable()
+            Case 3
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+            Case 2
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+            Case Else
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+         End Select
+         m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
+      End If
       ' forzo visualizzazione eventuali dati su aree
       SetAreasStatus( True)
       ' Dichiaro progetto non modificato
@@ -488,7 +548,7 @@ Public Class CurrentProjectPageUC
       End If
       ' Se la macchina del file è quella impostata
       If String.Compare(sFileMachine, m_MainWindow.GetCurrMachine(), True) = 0 Then
-         AdjustAdditionalTable()
+         AdjustAdditionalTable( True)
       ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
       Else
          ' Emetto messaggio
@@ -557,13 +617,15 @@ Public Class CurrentProjectPageUC
                File.Copy(sPhoto, sNewPhoto, True)
             Catch ex As FileNotFoundException
                ' non è un problema
+            Catch ex As DirectoryNotFoundException
+               ' non è un problema
             Catch ex As Exception
                Return False
             End Try
          End If
          ' Notifico a foto il cambio di path
          EgtChangePhotoPath(nPhotoId, sNewPhoto)
-      ' Altrimenti cancello eventuali file di foto associabili al progetto
+         ' Altrimenti cancello eventuali file di foto associabili al progetto
       Else
          Dim sPhoto1 As String = Path.ChangeExtension(sPath, "jpg")
          Dim sPhoto2 As String = Path.ChangeExtension(sPath, "png")
@@ -588,6 +650,8 @@ Public Class CurrentProjectPageUC
       SetProjectMaterial()
       ' Eseguo
       If Not SaveFile(sPath) Then Return False
+      ' aggiungo il file all'elenco dei file recenti
+      m_MruFiles.Add(sPath)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       ' Salvo eventuale VeinMatching
@@ -641,6 +705,8 @@ Public Class CurrentProjectPageUC
       If Not SaveFile(sPath) Then
          Return False
       End If
+      ' aggiungo il file all'elenco dei file recenti
+      m_MruFiles.Add(sPath)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -804,7 +870,7 @@ Public Class CurrentProjectPageUC
 
    Friend Function UpdateSideAngCutProbeFlag() As Boolean
       Dim bCurrSacProbe As Boolean =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso m_MainWindow.m_CurrentMachine.IsRawProbingPossible()
       Dim bProjSacProbe As Boolean = GetSideAngCutProbeFlag()
       If bCurrSacProbe <> bProjSacProbe Then Return SetSideAngCutProbeFlag(bCurrSacProbe)
       Return True

Project/ProjectMgrUC.xaml

@@ -14,32 +14,50 @@
             <ColumnDefinition Width="1.3*"/>
         </Grid.ColumnDefinitions>
         <UniformGrid Name="LowerButtonGrid" Rows="1" >
-        
-           <Button Name="NewBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="LoadBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="SaveBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="SaveNameBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-        
-           <Button Name="CSVBtn"
-                 Style="{DynamicResource OmagCut_YellowTextButton}"/> 
-           <ToggleButton Name="VeinMatchingBtn"
-                 Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-           <ToggleButton Name="RegisterBtn"
-                 Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+            <Button Name="NewBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource NuovoImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="LoadBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource CaricaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="SaveBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SalvaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="SaveNameBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource Salva-con-nomeImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="CSVBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource CSVImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            
+            <ToggleButton Name="VeinMatchingBtn"
+                 Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                <Image Source="{DynamicResource Vein-matchImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            
+            <ToggleButton Name="RegisterBtn"
+                 Style="{DynamicResource OmagCut_YellowToggleButton}"></ToggleButton>
            <Button Name="ResetCutBtn"
-                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                 Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
            <!--Abilito la selezione delle linee da disegno-->
-           <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_BlueToggleButton}"/>
-           
-                
+            <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
         </UniformGrid>
 
-        <Button Name="SimulateBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButtonPrjMgr}"/>
-        <Button Name="WorkBtn" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueTextButtonPrjMgr}"/>
+        <Button Name="SimulateBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+        </Button>
+        <Button Name="WorkBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+        </Button>
 
     </Grid>
 </UserControl>

Project/ProjectMgrUC.xaml.vb

@@ -14,28 +14,27 @@ Public Class ProjectMgrUC
 
    Private Sub ProjectMgrUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Imposto i messaggi letti dal file dei messaggi
-      NewBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 3)
-      LoadBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 4)
-      SaveBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 5)
-      SaveNameBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 6)
-      CSVBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 8)
-      VeinMatchingBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 9)
+      NewBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 3)
+      LoadBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 4)
+      SaveBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 5)
+      SaveNameBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 6)
+      CSVBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 8)
+      VeinMatchingBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 9)
+
       RegisterBtn.Content = "REG"                              'Shape Registration
       ResetCutBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)         'Reset
-      SimulateBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
+      SimulateBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
-         WorkBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
+         WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
       Else
-         WorkBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
+         WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
-      TestBtn.Content = EgtMsg(90255)                          'Test
+      TestBtn.ToolTip = EgtMsg(90255)                          'Test
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Impostazioni
-      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
-      m_CurrMachine = m_MainWindow.m_CurrentMachine
-      m_CurrNcComm = m_MainWindow.m_CNCommunication
+      SetReference()
 
       ' Se richiesto carico finestra per VeinMatching e ultimo intarsio
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) And
@@ -54,6 +53,12 @@ Public Class ProjectMgrUC
       End If
    End Sub
 
+   Public Sub SetReference()
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_CurrMachine = m_MainWindow.m_CurrentMachine
+      m_CurrNcComm = m_MainWindow.m_CNCommunication
+   End Sub
+
    Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -126,6 +131,23 @@ Public Class ProjectMgrUC
       Return nTabInd
    End Function
 
+   Friend Function ChangeTable() As Integer
+      Dim nRes As Integer = 0
+      ' se non abilitato esco dalla pagina
+      If GetPrivateProfileInt(S_TABLE, K_CHANGETABWD, 0, m_MainWindow.GetMachIniFile()) = 0 Then
+         Return nRes
+      End If
+      Select Case GetTableCount()
+         Case 2
+            ' Vuoi cambiare tavola?
+            Dim TableToUse As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90968)), EgtMsgBox.Buttons.OK_CANCEL, EgtMsgBox.Icons.NULL)
+            nRes = TableToUse.m_nPressedBtn
+         Case Else
+            ' negli altri casi (3 tavole o una tavola non fare nulla)
+      End Select
+      Return nRes
+   End Function
+
    Private Sub LoadBtn_Click(sender As Object, e As RoutedEventArgs) Handles LoadBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -153,6 +175,7 @@ Public Class ProjectMgrUC
    End Sub
 
    Friend Sub PostLoad(ByVal sCurrDir As String, sCurrFile As String)
+
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       If Not m_CurrProjPage.LoadProject(sCurrDir & "\" & sCurrFile) Then
          m_CurrProjPage.NewProject()
@@ -229,6 +252,12 @@ Public Class ProjectMgrUC
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -257,7 +286,7 @@ Public Class ProjectMgrUC
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' se sono in modalità Test allora eseguo solo il posizionamento della lama
-      If m_CurrProjPage.m_bSelectCurv Then
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv Then
          ' Verifico non sia versione Ufficio
          If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
             m_CurrProjPage.SetWarningMessage("Office Version")
@@ -297,9 +326,9 @@ Public Class ProjectMgrUC
          ptMid.x = (ptEnd.x + ptStart.x) / 2
          ptMid.y = (ptEnd.y + ptStart.y) / 2
          ptMid.z = (ptEnd.z + ptStart.z) / 2 + dDiam / 2
+         ptMid -= vtDirT * dThick
 
          '--------------------------- Imposto la posizione della macchina ----------------------------
-
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
@@ -310,14 +339,15 @@ Public Class ProjectMgrUC
          Dim nStat As Integer
          Dim dC1, dB1, dC2, dB2 As Double
          EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
-         ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
+         ' calcolo la posizione degli assi lineari X, Y, Z
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
 
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
-            vtDirT.Rotate(Vector3d.Z_AX, 180)
+            vtDirT = -vtDirT
+            ptMid -= vtDirT * dThick
             EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
@@ -329,6 +359,14 @@ Public Class ProjectMgrUC
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
+      ' se esiste salvo il nome del progetto
+      Dim sCurrProjName As String = String.Empty
+      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrProjName, m_MainWindow.GetIniFile())
+      If Not String.IsNullOrEmpty(sCurrProjName) Then
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME, sCurrProjName)
+      Else
+         EgtRemoveInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME)
+      End If
 
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
@@ -437,7 +475,7 @@ Public Class ProjectMgrUC
       ' Costringo ad aggiornare UI
       UpdateUI()
       ' Se macchina normale
-      If Not m_CurrMachine.bProdLine Then
+      If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
             ' copio il progetto corrente come progetto in lavorazione
@@ -448,6 +486,14 @@ Public Class ProjectMgrUC
                m_MainWindow.ExecSentProgScript(False)
             End If
          End If
+
+         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
+         '------------------- FINE Avvio il Ciclo-Start-------------------------
+
          ' Altrimenti linea di produzione
       Else
          ' Verifico non sia già stato trasmesso
@@ -490,12 +536,12 @@ Public Class ProjectMgrUC
                                             GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
                   If bSlabId Then
                      Dim sBlock As String = ""
-                     GetPrivateProfileString( S_RAWPART, K_BLOCKNAME, "", sBlock, m_MainWindow.GetIniFile())
-                     Dim nSlabNbr As Integer = GetPrivateProfileInt( S_RAWPART, K_SLABNBR, 0, m_MainWindow.GetIniFile())
+                     GetPrivateProfileString(S_RAWPART, K_BLOCKNAME, "", sBlock, m_MainWindow.GetIniFile())
+                     Dim nSlabNbr As Integer = GetPrivateProfileInt(S_RAWPART, K_SLABNBR, 0, m_MainWindow.GetIniFile())
                      nSlabNbr += 1
                      Dim sSlabNbr As String = nSlabNbr.ToString()
-                     WritePrivateProfileString( S_RAWPART, K_SLABNBR, sSlabNbr, m_MainWindow.GetIniFile())
-                     Utility.SetBlockAndSlabNbr( sBlock, sSlabNbr)
+                     WritePrivateProfileString(S_RAWPART, K_SLABNBR, sSlabNbr, m_MainWindow.GetIniFile())
+                     Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
                   End If
                   ' Salvo il progetto
                   m_CurrProjPage.SaveProject()
@@ -523,8 +569,10 @@ Public Class ProjectMgrUC
                If AskTransm.m_nPressedBtn <> 1 Then Return
             End If
          End If
+
          ' Se non collegato alla macchina
          If Not m_MainWindow.m_bNCLink Then
+            ' salvo il progetto corrente incrementando il valore del progetto
             m_CurrProjPage.SetWarningMessage(EgtMsg(90316))        'Non connesso alla macchina
             ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
@@ -535,8 +583,10 @@ Public Class ProjectMgrUC
             m_CurrProjPage.SaveProject()
             ' lancio eventuale lua post-trasmissione
             m_MainWindow.ExecSentProgScript(False, bAlreadySent)
+            ' se in versione demo (per linea di produzione) salvo il file corrente incrementando la numerazione
             Return
          End If
+
          ' Leggo variabile relativa al programma 1 (standard E80021)
          m_CurrNcComm.m_CN.n_DReadELS_handle = 0
          m_CurrNcComm.m_CN.ReadEls_Add_Parameter(m_CurrMachine.sVarProg1, 1)
@@ -610,6 +660,7 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+
       End If
 #End If
    End Sub
@@ -617,13 +668,6 @@ Public Class ProjectMgrUC
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
-      'If m_CurrNcComm.m_nNCType = 3 AndAlso m_CurrNcComm.m_CN.m_IsSiemensOne Then
-      '   SiemensMoveAxis(ptMid, dAngC, dAngB)
-      '   Return
-      'End If
-
-      Dim nTemp As Integer = 0
-      Dim dTemp As Double = 0
       Dim CmdString As String = String.Empty
       If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          Return
@@ -657,26 +701,8 @@ Public Class ProjectMgrUC
 
       '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
       ' Assegno valore ad ogni asse da muovere (in zero macchina)
-      Dim dAxVal As Double = ptMid.x
-      Dim bThickSaw As Boolean = True
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", dAxVal)
-      dAxVal = ptMid.y
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", dAxVal)
-      dAxVal = ptMid.z
+      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", ptMid.x)
+      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", ptMid.y)
       EgtLuaSetGlobNumVar("CMD.Z_AXISMOVE", ptMid.z)
       ' imposto gli angoli 
       EgtLuaSetGlobNumVar("CMD.C_ANGMOVE", dAngC)
@@ -692,15 +718,6 @@ Public Class ProjectMgrUC
       ' Log del comando
       EgtOutLog("CmdString=" & CmdString)
 
-      '' Eseguo in MDI
-      'm_CurrNcComm.m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI
-      'System.Threading.Thread.Sleep(150)
-      'm_CurrNcComm.m_CN.sz_ManualDataInput = CmdString
-      'm_CurrNcComm.m_CN.MDI_command()
-      'System.Threading.Thread.Sleep(150)
-      'm_CurrNcComm.m_CN.DGeneralFunctions_CycleStart()
-      'm_CurrNcComm.m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
-
       ' Reset lua
       EgtLuaResetGlobVar("CMD")
       ' Modifico stringa per inserire i newline ( in questo caso non c'è bisogno perchè tutto sulla stessa linea)
@@ -728,106 +745,17 @@ Public Class ProjectMgrUC
 
    End Sub
 
-   Private Sub SiemensMoveAxis(ptMid As Point3d, dAngC As Double, dAngB As Double)
-      Dim nTemp As Integer = 0
-      Dim dTemp As Double = 0
-      Dim CmdString As String = String.Empty
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua")
-
-      '----------- DATI MOVIMENTO -----------
-      ' imposto avanzamneto in rapido (non deve essere impostata feed e speed)
-      EgtLuaSetGlobBoolVar("CMD.G0", True)
-      '' fermo la rotazione dell'utensile (per sicure
-      'EgtLuaSetGlobNumVar("CMD.F", 30000)
-      'EgtLuaSetGlobNumVar("CMD.S", 0)
-
-      '----------- POSIZINE MACCHINA -----------
-      ' Leggo gli assi rispetto allo 0 macchina
-      m_CurrNcComm.m_CN.set_OP_OM(0)
-
-      System.Threading.Thread.Sleep(50)
-      Dim dL1o, dL2o, dL3o As Double
-      m_CurrNcComm.GetLinearAxesPositions(dL1o, dL2o, dL3o)
-      Dim dR1, dR2 As Double
-      m_CurrNcComm.GetRotaryAxesPositions(dR1, dR2)
-      EgtLuaSetGlobNumVar("CMD.L1o", dL1o)
-      EgtLuaSetGlobNumVar("CMD.L2o", dL2o)
-      EgtLuaSetGlobNumVar("CMD.L3o", dL3o)
-      EgtLuaSetGlobNumVar("CMD.R1", dR1)
-      EgtLuaSetGlobNumVar("CMD.R2", dR2)
-
-      ' Recupero spessore lama corrente
-      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-      EgtTdbSetCurrTool(sSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-      EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
-
-      '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
-      ' Assegno valore ad ogni asse da muovere (in zero macchina)
-      Dim dAxVal As Double = ptMid.x
-      Dim bThickSaw As Boolean = True
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", dAxVal)
-      dAxVal = ptMid.y
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", dAxVal)
-      dAxVal = ptMid.z
-      EgtLuaSetGlobNumVar("CMD.Z_AXISMOVE", ptMid.z)
-
-      EgtLuaSetGlobNumVar("CMD.C_ANGMOVE", dAngC)
-      EgtLuaSetGlobNumVar("CMD.B_ANGMOVE", dAngB)
-
-      ' Calcolo stringa di comando risultante
-      EgtLuaCallFunction("CmdString")
-      EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
-
-      ' Reset lua
-      EgtLuaResetGlobVar("CmdString")
-      EgtLuaResetGlobVar("CMD")
-      ' Log del comando
-      EgtOutLog("CmdString=" & CmdString)
-
-      ' Creo file 
-      Dim sFilePath As String = m_MainWindow.GetCncDir() & "\MANAXMOV.MPF"
-      Try
-         File.WriteAllLines(sFilePath, New List(Of String)({CmdString, "M30"}), Text.Encoding.UTF8)
-      Catch ex As Exception
-         EgtOutLog("Eccezione creazione programma: " & ex.Message)
-      End Try
-      ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_CurrNcComm.m_CN.Download_NC_prog(sFilePath, "MANAXMOV") = 0 Then
-         EgtOutLog("Programma caricato")
-         System.Threading.Thread.Sleep(150)
-         Dim sActivateManAxMov As String = "/plc/OmagCUT_DB.CTRL.Start_Asup"
-         ' Attivo variabile per esecuzione comando manuale
-         m_CurrNcComm.m_CN.DVariables_WriteVariables3(sActivateManAxMov, 1, 1, 0, 0, "")
-      End If
-   End Sub
-
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
 
    Private Sub TestBtn_Click(sender As Object, e As RoutedEventArgs) Handles TestBtn.Click
       If TestBtn.IsChecked Then
-         m_CurrProjPage.m_bSelectCurv = True
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = True
          ' deseleziono tutto
          EgtDeselectAll()
       Else
-         m_CurrProjPage.m_bSelectCurv = False
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
       ' aggiorno il disegno
       EgtDraw()

Project/StartLauncheWD.xaml

@@ -4,7 +4,7 @@
    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
    FontFamily="{DynamicResource OmagCut_Font}"
    ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="SaveNameWD" Height="300" Width="426.5" ShowInTaskbar="False">
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
     <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
     <Border Style="{DynamicResource OmagCut_Border}">
         <Grid x:Name="SaveNameGrid">
@@ -14,19 +14,21 @@
                 <ColumnDefinition Width="0.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="0.1*"/>
                 <RowDefinition Height="0.5*"/>
                 <RowDefinition Height="0.2*"/>
                 <RowDefinition Height="1*"/>
                 <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="0.4*"/>
+                <RowDefinition Height="0.1*"/>
                 <RowDefinition Height="1*"/>
                 <RowDefinition Height="0.2*"/>
                 
             </Grid.RowDefinitions>
 
-            <!--Messaggio di tipo di avvio-->
+            <!--Messaggio: Selezione modalità di avvio-->
             <TextBlock Name="SlectLauncherTxbl" Grid.Column="1" Grid.Row="1"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
             <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
                 <Grid.ColumnDefinitions>
@@ -39,32 +41,33 @@
 
                 </Grid.ColumnDefinitions>
 
-                <!--apri folder progetti-->
-                <Button Name="OpenFolder" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-                        ToolTip="OpenFolder">
-                    <Image Source="{DynamicResource ZoomWinImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <!--ultimo progetto-->
+                <Button Name="LastProject" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="LastProject">
+                    <Image Source="{DynamicResource LastProjImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
                 <!--nuovo progetto-->
-                <Button Name="NewProject" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                <Button Name="NewProject" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
                         ToolTip="New Project">
-                    <Image Source="{DynamicResource CsvNewImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
-                <!--ultimo progetto-->
-                <Button Name="LastProject" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-                        ToolTip="LastProject">
-                    <Image Source="{DynamicResource CsvOpenImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <!--apri folder progetti-->
+                <Button Name="OpenFolder" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="OpenFolder">
+                    <Image Source="{DynamicResource CaricaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
-                
+
             </Grid>
 
+            <UniformGrid Grid.Column="1" Grid.Row="5">
+                <TextBlock Name="FileName" Grid.Column="1"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <TextBlock Name="DataFile" Grid.Column="1"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            </UniformGrid>
             <!--lista degli ultimi file aperti-->
-            <ListBox Name="FilesLsBx"  Grid.Column="1" Grid.Row="5"
-                    SelectionMode="Extended">
-                <ListBox.ItemContainerStyle>
-                    <Style TargetType="ListBoxItem">
-
-                    </Style>
-                </ListBox.ItemContainerStyle>
+            <ListBox Name="FilesLsBx"  Grid.Column="1" Grid.Row="7" ItemTemplate="{DynamicResource FileNameLsBxItem}"
+                     SelectionMode="Extended">
             </ListBox>
 
 

Project/StartLauncheWD.xaml.vb

@@ -1,21 +1,31 @@
 Imports EgtUILib
 Imports EgtWPFLib
+Imports System.IO
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+
+Public Enum MODE_LAUNCHER
+   LastProject
+   NewProject
+   OpenFolder
+   ShowWindow
+   SelectedProject
+End Enum
+
 Public Class StartLauncherWD
 
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-
-   Public Enum MODE_LAUNCHER As Integer
-      OpenFolder = 0
-      NewProject = 1
-      LastProject = 2
-      SelectedProject = 3
-   End Enum
+   ' lista dei file recenti da visualizzare
+   Private m_RecentFileList As New ObservableCollection(Of FileNameLsBxItem)
 
    Private m_CurrSelection As MODE_LAUNCHER
-   Public ReadOnly Property CurrSelection As MODE_LAUNCHER
+   Public Property CurrSelection As MODE_LAUNCHER
       Get
          Return m_CurrSelection
       End Get
+      Set(value As MODE_LAUNCHER)
+         m_CurrSelection = value
+      End Set
    End Property
 
    Private m_SelPath As String = String.Empty
@@ -30,25 +40,89 @@ Public Class StartLauncherWD
       InitializeComponent()
    End Sub
 
+   '--------------------------- lista dei file recenti -----------------------------------------------------------------------
+   Private Class FileNameLsBxItem
+      Implements INotifyPropertyChanged
+
+      Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged
+
+      Private m_sDate As String
+      Private m_sName As String
+
+      Public Property sDate As String
+         Get
+            Return m_sDate
+         End Get
+         Set(value As String)
+            m_sDate = value
+         End Set
+      End Property
+
+      Public Property Name As String
+         Get
+            Return m_sName
+         End Get
+         Set(value As String)
+            If value <> m_sName Then
+               m_sName = value
+               NotifyPropertyChanged("Name")
+            End If
+         End Set
+      End Property
+
+      Public ReadOnly Property GraphicName As String
+         Get
+            ' recupero il nome del file con estensione, altrimenti -> Path.GetFileNameWithoutExtension(m_sName)
+            Return Path.GetFileNameWithoutExtension(m_sName)
+         End Get
+      End Property
+
+
+      Sub New(Name As String, dDate As Date)
+         Me.m_sName = Name
+         Me.m_sDate = dDate.ToString
+      End Sub
+
+      Public Sub NotifyPropertyChanged(propName As String)
+         RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+      End Sub
+
+   End Class
+   '--------------------------- lista dei file recenti -----------------------------------------------------------------------
+
    ' inizializzo la finestra
    Private Sub StartLauncherWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' carico la liste dei file recenti
-      FilesLsBx.ItemsSource = m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
+      FilesLsBx.ItemsSource = m_RecentFileList
+      Dim ItemFile As String = String.Empty
+      'carico la liste dei file recenti
+      Dim sFileName As String = String.Empty
+      For Each ItemFile In m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
+         sFileName = ItemFile.Replace("__", "_")
+         If Not String.IsNullOrEmpty(sFileName) Then
+            m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
+            m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
+         Else
+            m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFile)
+         End If
+      Next
+
       ' posiziono la fistra in centro alla pagina
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
       ' imopposto il messaggio di avvio
-      SlectLauncherTxbl.Text = "Seleziona modalità di avvio"
+      SlectLauncherTxbl.Text = EgtMsg(91010) ' Seleziona modalità di avvio
+      FileName.Text = EgtMsg(91011)          ' Progetti recenti
+      DataFile.Text = EgtMsg(91012)          ' Ultima apertura
+      LastProject.ToolTip = EgtMsg(91013)
+      NewProject.ToolTip = EgtMsg(91014)
+      OpenFolder.ToolTip = EgtMsg(91015)
    End Sub
 
    ' lancio l'apertura della pagina dei progetti
    Private Sub OpenFolder_Click(sender As Object, e As RoutedEventArgs) Handles OpenFolder.Click
       m_CurrSelection = MODE_LAUNCHER.OpenFolder
-      m_MainWindow.m_PrevActivePage = m_MainWindow.m_ActivePage
-      ' Passo alla pagina di apertura con preview
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+      EgtZoom(ZM.ALL)
       Me.Close()
    End Sub
 
@@ -68,7 +142,8 @@ Public Class StartLauncherWD
 
    ' quando viene rilasciato il mouse
    Private Sub SelectProject_MouseUp(sender As Object, e As RoutedEventArgs) Handles FilesLsBx.MouseDoubleClick, FilesLsBx.TouchUp
-      m_SelPath = FilesLsBx.SelectedItem
+      ' recupero il nome selezionato
+      m_SelPath = FilesLsBx.SelectedItem.Name
       m_CurrSelection = MODE_LAUNCHER.SelectedProject
       EgtZoom(ZM.ALL)
       Me.Close()