- Aggiornata versione a 2.4f1

- Allungato tempo attesa risposta modifica stato macchina su num flexium
- Aggiunta verifica diametro utensile su tastatura tagli inclinati

CAM/CamAuto.vb

@@ -101,6 +101,74 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

CadCuts/CadCutPageUC.xaml.vb

@@ -108,6 +108,8 @@ Public Class CadCutPageUC
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -142,6 +144,8 @@ Public Class CadCutPageUC
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -168,6 +172,8 @@ Public Class CadCutPageUC
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -176,6 +182,8 @@ Public Class CadCutPageUC
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -198,6 +206,8 @@ Public Class CadCutPageUC
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False

CadCuts/NestPageUC.xaml

@@ -99,23 +99,29 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
-
-            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                     <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >

CadCuts/NestPageUC.xaml.vb

@@ -16,12 +16,18 @@ Public Class NestPageUC
    ' dati per DragRettangoli (estensio/accorciamento dei rettangoli trascinando un lato)
    Private m_bIsVisibleDragRettangle As Boolean = False
    Friend m_bIsCheckedDragRettangle As Boolean = False
+   ' dati per attivare disattivare le lavorazioni WaterJet
+   Private m_bIsVisibleSliptCurveWJ As Boolean = False
+   Friend m_bIsCheckedSplitCurveWJ As Boolean = False
+   ' dati per attivare disattivare la selezione del pubnto di inizio
+   Private m_bIsVisibleStarCurvetWJ As Boolean = False
+   Friend m_bIsCheckedStartCurveWJ As Boolean = False
 
    ' Id della curva e del taglio selezionati per eseguire il test
    Friend m_CurrSelectedCurv As Integer = GDB_ID.NULL
    Friend m_CurrSelectedSawCurv As Integer = GDB_ID.NULL
 
-   ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
+   ' Id del rettangolo, del taglio e della curva da modificare tramite Drag
    Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
    Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
    Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
@@ -33,6 +39,10 @@ Public Class NestPageUC
    Private m_sTextContent As String = String.Empty
    Private m_dRettangleIsModified As Boolean = False
 
+   ' Id dei lato WJ da separare tramite comando ON_OFF
+   Private m_nIdSelectedSideWJ As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet As Integer = GDB_ID.NULL
+
    Enum PART_POS As Integer
       IN_TABLE = -1
       NONE_TABLE = 0
@@ -85,13 +95,36 @@ Public Class NestPageUC
       SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
 
+      Dim nColumsIn_UG1 As Integer = 2
       ' gestisco la visualizzazione del comando PAN (per il drag dei rettangoli)
       m_bIsVisibleDragRettangle = (GetPrivateProfileInt(S_NEST, K_DRAG_RETTANGLE, 0, m_MainWindow.GetIniFile()) <> 0)
       If Not m_bIsVisibleDragRettangle Then
-         UG1.Columns = 1
+         nColumsIn_UG1 = 1
          DragRettanleBtn.Visibility = Visibility.Collapsed
       End If
 
+      ' gestisco la visualizzazione del comando Splt (per i tagli waterjet)
+      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
+         nColumsIn_UG1 += 1
+         SplitCurveWJBtn.Visibility = Visibility.Visible
+         '91133=Separa
+         SplitCurveWJBtn.ToolTip = EgtMsg(91133)
+      Else
+         SplitCurveWJBtn.Visibility = Visibility.Collapsed
+      End If
+      UG1.Columns = nColumsIn_UG1
+
+      Dim nColumnIn_UG0 As Integer = 2
+      ' gestisco la visualizzazione del comando Punto_Inizio (per i tagli waterjet)
+      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
+         nColumnIn_UG0 += 1
+         StartCurveWJBtn.Visibility = Visibility.Visible
+         ' 91132=Start
+         StartCurveWJBtn.ToolTip = EgtMsg(91132)
+      Else
+         StartCurveWJBtn.Visibility = Visibility.Collapsed
+      End If
+      UG0.Columns = nColumnIn_UG0
    End Sub
 
    Private Sub NestPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -191,7 +224,7 @@ Public Class NestPageUC
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
                If Not EgtGetGroupObjs(nIdSaw) Then
                   m_CurrSelectedSawCurv = nIdSaw
@@ -209,6 +242,161 @@ Public Class NestPageUC
       Return
    End Sub
 
+   ' funzione per la selezione dei lati su cui operare la separazione del tagli waterjet
+   Private Sub OnMyMouseDownSceneSplitCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo e non in modalità registrazione
+      If Not m_bActive Or m_bRegister Then Return
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_bIsCheckedSplitCurveWJ Then
+         Return
+      End If
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_nIdSelectedWaterJet)
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
+                  EgtDeselectObj(m_nIdSelectedSideWJ)
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
+               Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count > 0 Then
+                  m_nIdSelectedSideWJ = nIdMy
+                  Dim nValInfo As String = 1
+                  Dim nNewValInfo As Integer = nValInfo
+                  If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+                     If nValInfo = 1 Then
+                        nNewValInfo = 0
+                     Else
+                        nNewValInfo = 1
+                     End If
+                  Else
+                     ' se manca l'info allora il taglio sValInfo = "1" quindi separo il taglio
+                     nNewValInfo = 0
+                  End If
+                  EgtSetInfo(nIdMy, INFO_JOINENTITY, nNewValInfo)
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
+                  GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  ' assegno un identificativo grafico per inidcare che è un taglio separato
+                  If nNewValInfo = 0 Then
+                     AssignFlagOnGraphic(nIdMy, nIdParentPart)
+                  Else
+                     EraseFlagOnGraphic(nIdMy, nIdParentPart)
+                  End If
+                  m_nIdSelectedWaterJet = nIdWJ
+                  ' salvo il valore del PreView evidenziato
+                  EgtSetMark(nIdWJ)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+      Return
+   End Sub
+
+   ' funzione per la selezione del punto di inizio tagli waterjet (percorso chiuso)
+   Private Sub OnMyMouseDownSceneStartCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo e non in modalità registrazione
+      If Not m_bActive Or m_bRegister Then Return
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_bIsCheckedStartCurveWJ Then
+         Return
+      End If
+
+      ' Acquisisco punto da disegno
+      Dim ptStartCurv As New Point3d
+      EgtUnProjectPoint(e.Location, ptStartCurv)
+      ' Aggiusto Z punto acquisito (è in globale)
+      Dim ptRawMax As New Point3d
+      Dim ptRawMin As New Point3d
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ptStartCurv.z = ptRawMax.z
+      End If
+
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_nIdSelectedWaterJet)
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Or sLayer = NAME_INLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' verifico che il contorno sia chiuso, altrimenti esco
+               If Not VerifyOutLoopIsClosed(nIdParent) Then
+                  ' 91131=Il contorno non è chiuso
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91131))
+                  Exit While
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet_n_S associate a questo Part
+               Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count = 1 And ListGroupSaw.Count = 0 Then
+                  EgtSetInfo(nIdParent, INFO_START, ptStartCurv)
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
+                  GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  m_nIdSelectedWaterJet = nIdWJ
+                  EgtSetMark(nIdWJ)
+                  EgtDraw()
+                  Exit While
+               Else
+                  ' 91131=Il contorno non è chiuso
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91131))
+                  Exit While
+               End If
+
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+      Return
+   End Sub
+
 #Region "DRAG RETTANGLE"
 
    ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
@@ -216,7 +404,7 @@ Public Class NestPageUC
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
       ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
-      If e.Button <> Windows.Forms.MouseButtons.Left then
+      If e.Button <> Windows.Forms.MouseButtons.Left Then
          Return
       End If
       ' Verifico se selezionato indicativo di pezzo
@@ -511,6 +699,186 @@ Public Class NestPageUC
 
 #End Region    ' Drag Rettangolo
 
+#Region "SPLIT/START CURVE"
+
+   ' restituisce l'elenco dei Gruppi Waterjet associati al contorno indicato
+   Public Function ResearchGropuWJ(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Waterjet" & nIdMy.ToString & "S")
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
+   ' restituisce l'elenco dei Gruppi Saw associati al contorno indicato
+   Public Function ResearchGropuSaw(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
+   Public Function GetPVIdFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer) As Integer
+      Dim IdWaterjetPV As Integer = GDB_ID.NULL
+      For Each nIdItem As Integer In ListGroup
+         Dim sName As String = String.Empty
+         If EgtGetName(nIdItem, sName) Then
+            If sName.Contains(nIdMy.ToString) Then
+               IdWaterjetPV = nIdItem
+               Exit For
+            End If
+         End If
+      Next
+      Return IdWaterjetPV
+   End Function
+
+   Public Sub GetCurrentPVFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, nIdParent As Integer)
+      Dim nObjInGroup As Integer = EgtGetGroupObjs(nIdParent)
+      Dim nCount As Integer = 0
+      GetNextSideJoint(ListGroup, nIdMy, nIdWj, nCount, nObjInGroup)
+      If nIdWj <> GDB_ID.NULL Then Return
+      GetPrevSideJoint(ListGroup, nIdMy, nIdWj, nCount, nObjInGroup)
+   End Sub
+
+   ' funzione ricorsiva per la ricerca del lato al quale è associata la PreView
+   Private Sub GetNextSideJoint(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, ByRef nCount As Integer, nObjInGroup As Integer)
+      Dim nValInfo As Integer = 1
+      ' espressione di controllo per evitare di generare Loop infinito
+      If nCount > nObjInGroup Then Return
+      If nIdWj = GDB_ID.NULL Then
+         Dim nIdWJNext As Integer = EgtGetNext(nIdMy)
+         If nIdWJNext = GDB_ID.NULL Then nIdWJNext = EgtGetFirstInGroup(EgtGetParent(nIdMy))
+         nCount += 1
+         EgtGetInfo(nIdWJNext, INFO_JOINENTITY, nValInfo)
+         If nValInfo = 1 Then
+            nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJNext)
+            If nIdWj <> GDB_ID.NULL Then Return
+         Else
+            Return
+         End If
+         'nIdWJNext = EgtGetNext(nIdWJNext)
+         GetNextSideJoint(ListGroup, nIdWJNext, nIdWj, nCount, nObjInGroup)
+         If nIdWj <> GDB_ID.NULL Then Return
+      End If
+   End Sub
+
+   ' funzione ricorsiva per la ricerca del lato al quale è associata la PreView
+   Private Sub GetPrevSideJoint(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, ByRef nCount As Integer, nObjInGroup As Integer)
+      Dim nValInfo As Integer = 1
+      ' espressione di controllo per evitare di generare Loop infinito
+      If nCount > nObjInGroup Then Return
+      If nIdWj = GDB_ID.NULL Then
+         Dim nIdWJPrev As Integer = EgtGetPrev(nIdMy)
+         ' se arrivato al primo valore allora continuo la ricerca dall'ultimo
+         If nIdWJPrev = GDB_ID.NULL Then nIdWJPrev = EgtGetLastInGroup(EgtGetParent(nIdMy))
+         nCount += 1
+         EgtGetInfo(nIdWJPrev, INFO_JOINENTITY, nValInfo)
+         If nValInfo = 1 Then
+            nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJPrev)
+            If nIdWj <> GDB_ID.NULL Then Return
+         Else
+            Return
+         End If
+         'nIdWJPrev = EgtGetPrev(nIdWJPrev)
+         GetPrevSideJoint(ListGroup, nIdWJPrev, nIdWj, nCount, nObjInGroup)
+         If nIdWj <> GDB_ID.NULL Then Return
+
+      End If
+   End Sub
+
+   Public Sub ResetSplitCurvWJParam()
+      EgtDeselectObj(m_nIdSelectedSideWJ)
+      EgtResetMark(m_nIdSelectedWaterJet)
+      m_nIdSelectedSideWJ = GDB_ID.NULL
+      m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+   ' ricevo l'ID del percorso di lavorazione WJ al quale associo una etichetta grafica con scritto "S"
+   Private Sub AssignFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then
+         IdAuxLayer = EgtCreateGroup(IdParentPart)
+         EgtSetName(IdAuxLayer, INFO_AUX_SPLIT_WJ)
+      End If
+      ' recupero il punto medio del segmento selezionato
+      Dim MidPoint As Point3d
+      EgtMidPoint(nIdMy, GDB_RT.GLOB, MidPoint)
+      'Dim nIdTextFlag As Integer = EgtCreateText(IdAuxLayer, MidPoint, "*", 20, GDB_RT.GLOB)
+      Dim nIdTextFlag As Integer = GetCreateFlagText(nIdMy, IdAuxLayer)
+      EgtSetColor(nIdTextFlag, New Color3d(255, 0, 0))
+      EgtSetName(nIdTextFlag, "RefSide_" & nIdMy.ToString)
+   End Sub
+
+   Private Function GetCreateFlagText(nId As Integer, nIdLayer As Integer, Optional sText As String = "*") As Integer
+      ' recupero il punto medio
+      Dim MidPoint As Point3d
+      EgtMidPoint(nId, GDB_RT.GLOB, MidPoint)
+      ' recupero la direzione del vettore nel punto medio
+      Dim vVers As Vector3d
+      EgtMidVector(nId, GDB_RT.GLOB, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      ' Ingombro complessivo della lavorazione
+      Dim ptMin, ptMax As Point3d
+      EgtStartPoint(nId, GDB_RT.GLOB, ptMin)
+      EgtEndPoint(nId, GDB_RT.GLOB, ptMax)
+      ' Metto il numero nel centro
+      Dim dRadXY = Point3d.DistXY(ptMin, ptMax)
+      Dim dHtxt As Double = 50
+      Dim dRat As Double = 0.75
+      If dRadXY < 200 Then
+         dHtxt = 40
+         dRat = 0.6
+      ElseIf dRadXY < 25 Then
+         dHtxt = 25
+         dRat = 0.5
+      End If
+      ' determino la posizione del flag
+      MidPoint.x += vVers.x * dHtxt / 2
+      MidPoint.y += vVers.y * dHtxt / 2
+
+      Return EgtCreateTextAdv(nIdLayer, MidPoint, 0, sText, "", 300, False, dHtxt, dRat, 0, INS_POS.MC, GDB_RT.GLOB)
+   End Function
+
+   Private Sub EraseFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then Return
+      Dim nIdTextFlag As Integer = EgtGetFirstNameInGroup(IdAuxLayer, "RefSide_" & nIdMy.ToString)
+      EgtErase(nIdTextFlag)
+   End Sub
+
+   Public Sub ResetStartCurvWJParam()
+      EgtResetMark(m_nIdSelectedWaterJet)
+      m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+#End Region    ' Split/Start Curve
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
@@ -539,6 +907,18 @@ Public Class NestPageUC
          Return
       End If
 
+      ' se in modalità SplitCurveWJ (separazione dei tagli WaterJet)
+      If m_bIsCheckedSplitCurveWJ Then
+         OnMyMouseDownSceneSplitCurv(sender, e)
+         Return
+      End If
+
+      ' se in modalità StartCurveWJ (punto di inzio taglio waterjet)
+      If m_bIsCheckedStartCurveWJ Then
+         OnMyMouseDownSceneStartCurv(sender, e)
+         Return
+      End If
+
       ' Per default no drag
       m_bDrag = False
       ' Verifico se selezionato indicativo di pezzo
@@ -588,10 +968,10 @@ Public Class NestPageUC
 
             ' Drag possibile
             m_bDrag = True
-               Exit While
-            Else
-               ' verifico se l'elemento selezionato è il nome della tavola
-               If EgtGetType(nId) = GDB_TY.EXT_TEXT AndAlso (sNamePartId = MAIN_TAB Or sNamePartId = SECOND_TAB) Then
+            Exit While
+         Else
+            ' verifico se l'elemento selezionato è il nome della tavola
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT AndAlso (sNamePartId = MAIN_TAB Or sNamePartId = SECOND_TAB) Then
                Dim nRes As Integer = m_MainWindow.m_CadCutPageUC.m_ProjectMgr.ChangeTable()
                ' se non è stata eseguita nessuna scelta esco dal ciclo 
                If nRes = 0 Then Exit While
@@ -802,12 +1182,19 @@ Public Class NestPageUC
       If Not m_bActive Then Return
       ' verifico che non sia attivo il comando Test
       If m_bSelectCurv Then Return
-      ' verifico che non sia attivo il comando di Drag dei rettangoli
+      ' verifico che sia attivo il comando di Drag dei rettangoli
       If m_bIsCheckedDragRettangle Then
          ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
          ResetDragRettangleParam()
          Return
       End If
+      ' verifico che sia attivo il comando di modifica tagli waterjet
+      If m_bIsCheckedSplitCurveWJ Then
+         Return
+      End If
+      If m_bIsCheckedStartCurveWJ Then
+         Return
+      End If
 
       ' Se eseguito drag
       If Not m_bDragToStart Then
@@ -1850,6 +2237,12 @@ Public Class NestPageUC
    Private Sub DragRettangle_Click() Handles DragRettanleBtn.Click
       If DragRettanleBtn.IsChecked Then
          m_bIsCheckedDragRettangle = True
+         SplitCurveWJBtn.IsChecked = False
+         ResetSplitCurvWJParam()
+         m_bIsCheckedSplitCurveWJ = False
+         StartCurveWJBtn.IsChecked = False
+         ResetStartCurvWJParam()
+         m_bIsCheckedStartCurveWJ = False
       Else
          m_bIsCheckedDragRettangle = False
          ResetDragRettangleParam()
@@ -1859,6 +2252,42 @@ Public Class NestPageUC
       EgtDraw()
    End Sub
 
+   Private Sub SplitCurveWJBtn_Click() Handles SplitCurveWJBtn.Click
+      If SplitCurveWJBtn.IsChecked Then
+         m_bIsCheckedSplitCurveWJ = True
+         DragRettanleBtn.IsChecked = False
+         m_bIsCheckedDragRettangle = False
+         StartCurveWJBtn.IsChecked = False
+         ResetStartCurvWJParam()
+         m_bIsCheckedStartCurveWJ = False
+      Else
+         m_bIsCheckedSplitCurveWJ = False
+         ' resetto i parametri di selezione dei lati
+         ResetSplitCurvWJParam()
+         m_CurrProjPage.ClearMessage()
+         ShowParkedParts()
+      End If
+      EgtDraw()
+   End Sub
+
+   Private Sub StartCurveWJBtn_Click() Handles StartCurveWJBtn.Click
+      If StartCurveWJBtn.IsChecked Then
+         m_bIsCheckedStartCurveWJ = True
+         DragRettanleBtn.IsChecked = False
+         m_bIsCheckedDragRettangle = False
+         ResetSplitCurvWJParam()
+         SplitCurveWJBtn.IsChecked = False
+         m_bIsCheckedSplitCurveWJ = False
+      Else
+         m_bIsCheckedStartCurveWJ = False
+         ' resetto i parametri di selezione dei lati
+         ResetStartCurvWJParam()
+         m_CurrProjPage.ClearMessage()
+         ShowParkedParts()
+      End If
+      EgtDraw()
+   End Sub
+
    Private Sub StorePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StorePartBtn.Click
       ' creo la lista delle famiglie di pezzi presenti in parcheggio
       GetFamilyGroupInPark()

CadCuts/SplitPageUC.xaml.vb

@@ -1799,6 +1799,15 @@ Public Class SplitPageUC
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv( m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -1853,6 +1862,36 @@ Public Class SplitPageUC
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection( ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos( 30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin( 30 * Math.PI / 180)

Constants/ConstGen.vb

@@ -304,6 +304,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

DrawImport/AlzFrontUC.xaml.vb

@@ -76,9 +76,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
-      Parameter5TxBl.Text = "Spessore"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2404, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2404, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -571,6 +571,10 @@ Class MainWindow
       TestOff()
       ' disabilito DragRettangle
       DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -628,6 +632,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -682,6 +688,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -735,6 +743,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -789,6 +799,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -838,6 +850,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1144,10 +1158,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      ' DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1806,7 +1825,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next
@@ -1905,4 +1926,17 @@ Class MainWindow
 
    End Sub
 
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
+   End Sub
+
 End Class

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.4.2")>
-<Assembly: AssemblyFileVersion("2.4.4.2")>
+<Assembly: AssemblyVersion("2.4.6.2")>
+<Assembly: AssemblyFileVersion("2.4.6.2")>

NcComm/M_Num.vb

@@ -92,7 +92,7 @@ Namespace Num
       Private Const TIMEOUT As Short = 99
       Private Const SHORTSLEEPTIME As Short = 10
       Private Const LONGSLEEPTIME As Short = 40
-      Private Const SHORTSLEEPCOUNT As Short = 20
+      Private Const SHORTSLEEPCOUNT As Short = 100
       Private Const LONGSLEEPCOUNT As Short = 200
 
 #End Region

OmagCUT.vbproj

@@ -1255,6 +1255,12 @@
   <ItemGroup>
     <Resource Include="Resources\GenerateCN.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -107,6 +107,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -175,6 +175,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

Project/CurrentProjectPageUC.xaml.vb

@@ -856,7 +856,7 @@ Public Class CurrentProjectPageUC
 
    Friend Function UpdateSideAngCutProbeFlag() As Boolean
       Dim bCurrSacProbe As Boolean =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso m_MainWindow.m_CurrentMachine.IsRawProbingPossible()
       Dim bProjSacProbe As Boolean = GetSideAngCutProbeFlag()
       If bCurrSacProbe <> bProjSacProbe Then Return SetSideAngCutProbeFlag(bCurrSacProbe)
       Return True

Project/ProjectMgrUC.xaml.vb

@@ -252,6 +252,10 @@ Public Class ProjectMgrUC
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -749,7 +753,7 @@ Public Class ProjectMgrUC
       Else
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
       ' aggiorno il disegno
       EgtDraw()