Merge branch 'master' into Features/New_Grid_In_DirectCut

CAM/CamAuto.vb

@@ -199,22 +199,22 @@ Friend Module CamAuto
    ' ripristina la lavorazone indicata di default per i tagli inclinati
    Private Sub SetResetDef_Machining(nEntId As Integer, sSawingTilted As String, bApplySawingTilted As Boolean, bOnlySideAng As Boolean)
       While nEntId <> GDB_ID.NULL
-         Dim sInfoSIdeAng As String = String.Empty
-         EgtGetInfo(nEntId, INFO_SIDE_ANGLE, sInfoSIdeAng)
+         Dim sInfoOrigSideAng As String = String.Empty
+         EgtGetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, sInfoOrigSideAng)
          ' Se è un'entità associata ad una lavorazione inclinata
-         If Not String.IsNullOrEmpty(sInfoSIdeAng) Then
+         If Not String.IsNullOrEmpty(sInfoOrigSideAng) AndAlso sInfoOrigSideAng <> "0" Then
             If bApplySawingTilted Then
                ' forzo la lavorazione inclinata
                If String.IsNullOrEmpty(sSawingTilted) Then
                   ' ma se non esiste nessuna lavorezione specifica applico qualla standard
-                  EgtRemoveInfo(nEntId, DEF_MACHINING)
+                  EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
                Else
                   ' Applico quella specificata
-                  EgtSetInfo(nEntId, DEF_MACHINING, sSawingTilted)
+                  EgtSetInfo(nEntId, DEF_MACHINING_TILTED, sSawingTilted)
                End If
             Else
                ' Rimuovo la lavorazione e applico quella standard
-               EgtRemoveInfo(nEntId, DEF_MACHINING)
+               EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
             End If
 
          ElseIf Not bOnlySideAng Then

CadCuts/ChangeToolWD.xaml.vb

@@ -54,6 +54,11 @@ Public Class ChangeToolWD
 
    Private Sub GetDiamAndThickDefaultSaw()
       m_DefaultSaw_Name = m_MainWindow.m_CurrentMachine.sCurrSaw
+      ' Dalla lavorazione corrente recupero il nome della lama
+      If EgtMdbSetCurrMachining(m_CurrSawing) Then
+         Dim sNameTool As String = String.Empty
+         If EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool) Then m_DefaultSaw_Name = sNameTool
+      End If
       If EgtTdbSetCurrTool(m_DefaultSaw_Name) Then
          ' Diametro lama lavorazione
          EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_DefaultSaw_Diam)

CadCuts/MoveRawPartPage.xaml.vb

@@ -44,8 +44,8 @@ Public Class MoveRawPartPage
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
-      ScrapsBtn.Content = "Add Scraps"
-      UnloadPartsBtn.Content = "Move part"
+      ScrapsBtn.Content = EgtMsg(90366)                      'Add Scraps
+      UnloadPartsBtn.Content = EgtMsg(90367)                 'Move part
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -124,10 +124,10 @@ Public Class MoveRawPartPage
       If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
          ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
          SetAuxTabInCurrDisposition()
-         UnloadPartsBtn.Content = "Go to MOVE part"
+         UnloadPartsBtn.Content = EgtMsg(90368)    ' Go to MOVE part
          ' altrimenti, aggiorno visualizzazione
       ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
-         UnloadPartsBtn.Content = "Go to UNLOAD part"
+         UnloadPartsBtn.Content = EgtMsg(90369)    ' Go to UNLOAD part
       End If
       '---------------------------- AUX TABLE ---------------------------- 
       EgtDraw()
@@ -215,10 +215,10 @@ Public Class MoveRawPartPage
       Else
          UnloadPartsBtn.Visibility = Visibility.Visible
          If m_SplitPage.m_bOnAuxTab Then
-            UnloadPartsBtn.Content = "Go to MOVE part"
+            UnloadPartsBtn.Content = EgtMsg(90368)    ' Go to MOVE part
             ' altrimenti, aggiorno visualizzazione
          Else
-            UnloadPartsBtn.Content = "Go to UNLOAD part"
+            UnloadPartsBtn.Content = EgtMsg(90369)    ' Go to UNLOAD part
          End If
       End If
       ' Aggiorno interfaccia per taglio perpendicolare
@@ -342,7 +342,7 @@ Public Class MoveRawPartPage
                If VerifyCollisionWithOtherRawPart(nId) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(nId, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))      ' Collisione pezzi
                Else
                   ' Se con ventose, le nascondo
                   If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -352,7 +352,7 @@ Public Class MoveRawPartPage
                If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))      ' Collisione pezzi
                   EgtDraw()
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
@@ -361,7 +361,7 @@ Public Class MoveRawPartPage
                If VerifyCollisionWithOtherRawPart(nId, True) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))       ' Collisione pezzi
                   EgtDraw()
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
@@ -538,18 +538,18 @@ Public Class MoveRawPartPage
       If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
          If nVal = 1 Or nVal = 2 Then
             ' 1 → è stato definito come nuovo grezzo oppure, 2 → è stato definito come nuovo grezzo ed è stato inserito nel DB delle lastre
-            ScrapsBtn.Content = "Remove Scrap"
+            ScrapsBtn.Content = EgtMsg(91228)      ' Remove Scrap
             ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
             Return True
          ElseIf nVal = 3 Then
             ' non è possibile rimuovere il grezzo in questa fase
-            ScrapsBtn.Content = "Defined as Scrap"
+            ScrapsBtn.Content = EgtMsg(91229)      ' Defined as Scrap
             ScrapsBtn.IsEnabled = False
             Return True
          End If
       End If
       ' non è un nuovo grezzo
-      ScrapsBtn.Content = "Add Scrap"
+      ScrapsBtn.Content = EgtMsg(91230)            ' Add Scrap
       ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
       Return False
    End Function

CadCuts/NestPageUC.xaml.vb

@@ -110,7 +110,7 @@ Public Class NestPageUC
       RemovePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
       SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
-      DragRettanleBtn.ToolTip = "Strech"
+      DragRettanleBtn.ToolTip = EgtMsg(91207)                       'Strech
 
       ' Nascondo i pulsanti in uso quando attivo la modalità REG
       UG0_Reg.Visibility = Visibility.Hidden
@@ -356,7 +356,7 @@ Public Class NestPageUC
       End While
       If nIdMy = GDB_ID.NULL Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Select OUTLOOP")
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(91208))      ' Select OUTLOOP
       End If
       Return
    End Sub
@@ -544,7 +544,7 @@ Public Class NestPageUC
                m_nIdSelectedOutLoopRettangle = nIdParent
                If Not IsRettangle(m_SideListRettangle) Then
                   m_CurrProjPage.ClearMessage()
-                  m_CurrProjPage.SetWarningMessage("Non è un rettangolo (0)")
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91209))     ' Non è un rettangolo (0)
                   Return
                End If
                ' recupero il gruppo della lavorazione associata
@@ -553,13 +553,13 @@ Public Class NestPageUC
                ' se non esiste un gruppo di lavorazione associato allora esco
                If nIdPV = GDB_ID.NULL Then
                   m_CurrProjPage.ClearMessage()
-                  m_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (1)")
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91210))      ' Pezzo in parcheggio (1)
                   Return
                End If
                ' se esiste ma è vuoto (pezzo scaricato da tavola)
                If EgtGetFirstInGroup(nIdPV) = GDB_ID.NULL Then
                   m_CurrProjPage.ClearMessage()
-                  m_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (2)")
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91211))    ' Pezzo in parcheggio (2)
                   Return
                End If
                ' Devo verificare che sia una lavorazione solo di lama?
@@ -1017,7 +1017,7 @@ Public Class NestPageUC
                AddPointRegBtn.IsChecked = False
             Else
                m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-               m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Max spot for reg: " & m_nCountSpot.ToString)
+               m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91212) & m_nCountSpot.ToString)    ' Max spot for reg: 
             End If
          ElseIf RemovePointRegBtn.IsChecked Then
             ' Verifico se selezionato indicativo di pezzo
@@ -3716,7 +3716,7 @@ Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
       ' Verifico che almeno un punto sia stato inserito
       If m_nCountSpotCUT < 1 Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Insert one spot reg to start.")
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91213))      ' Insert one spot reg to start.
       End If
 
       ' recupero l'elenco non ordinato degli Id dei punti SpotReg (da Office)

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -33,8 +33,8 @@
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
 
-      TitleWDTxbl.Text = "Selection parts"
-      NbrOfPartsMsg.Text = "Number of parts"
+      TitleWDTxbl.Text = EgtUILib.EgtMsg(91232)      ' Selection parts
+      NbrOfPartsMsg.Text = EgtUILib.EgtMsg(91233)    ' Number of parts
       NbrOfParts.Text = m_NumberOfParts.ToString
    End Sub
 

CadCuts/SelectTableWD.xaml.vb

@@ -20,7 +20,7 @@ Public Class SelectTableWD
 
    Private Sub ChangeTable_Initialized() Handles Me.Initialized
 
-      Title.Text = "Seleziona la tavola da usare"
+      Title.Text = EgtUILib.EgtMsg(91234)      ' Seleziona la tavola da usare
       ' recuepero l'inidce della tavola corrente
       Dim nIndeXCurrTab As Integer = GetCurrentTable()
       ' creo la lista delle tavole disponibili (attivo il bottone della tavola attualmente in uso)

CadCuts/SplitAuto.vb

@@ -429,7 +429,7 @@ Public Module SplitAuto
                ' Se macchina con cambio utensile di lama
                If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
                   Dim sSawing As String = String.Empty, sSaw As String = String.Empty
-                  m_MainWindow.m_CadCutPageUC.m_SplitPage.GetCurrSawingandSaw(nOperId, sSawing, sSaw)
+                  m_MainWindow.m_CadCutPageUC.m_SplitPage.GetCurrSawingAndSaw(nOperId, sSawing, sSaw)
                   ' Setto l'utensile corrente
                   EgtTdbSetCurrTool(sSaw)
                   ' recupero il colore della lavorazione direttamente dall'utensile

CadCuts/SplitPageUC.xaml.vb

@@ -93,8 +93,8 @@ Public Class SplitPageUC
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       ' Modifica
       AutoBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 18)         ' Auto
       RestartBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 19)      ' Restart
-      BridgesWJBtn.ToolTip = "Bridges"
-      BridgesDeleteWJBtn.ToolTip = "Remove bridges"
+      BridgesWJBtn.ToolTip = EgtMsg(91214)                   ' Bridges
+      BridgesDeleteWJBtn.ToolTip = EgtMsg(91215)             ' Remove bridges
    End Sub
 
    Private Sub SplitPageUC_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -236,7 +236,7 @@ Public Class SplitPageUC
       ' Visualizzo la posizione utensile solo se configurata
       If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
          Dim sSawing As String = String.Empty, sSaw As String = String.Empty
-         GetCurrSawingandSaw(Mach.m_nId, sSawing, sSaw)
+         GetCurrSawingAndSaw(Mach.m_nId, sSawing, sSaw)
          ' Verifico che sia montata su un portautensile
          EgtTdbSetCurrTool(sSaw)
          EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
@@ -310,7 +310,7 @@ Public Class SplitPageUC
                         m_nIdSelectedSideWJ = GDB_ID.NULL
                         nIdParentPart = GDB_ID.NULL
                         m_CurrProjPage.ClearMessage()
-                        m_CurrProjPage.SetWarningMessage("Bridge intersects part")
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(91216))      ' Bridge intersects part
                         Return
                      End If
                   End If
@@ -655,8 +655,15 @@ Public Class SplitPageUC
       Dim SubEntId As Integer = GDB_ID.NULL
       EgtSetCurrMachining(nMchId)
       If Not EgtGetMachiningGeometry(0, EntId, SubEntId) Then Return
+      ' verifico se la lavorazione selezionata ha un angolo di inclinazione
+      Dim dSideAng As Double = 0.0
+      EgtGetMachiningParam(MCH_MP.SIDEANGLE, dSideAng)
+      Dim sDefMach As String = DEF_MACHINING
+      If Math.Abs(dSideAng) > 0 Then
+         sDefMach = DEF_MACHINING_TILTED
+      End If
       ' Recupero il nome della lavorazione
-      EgtGetInfo(EntId, DEF_MACHINING, sSawing)
+      EgtGetInfo(EntId, sDefMach, sSawing)
 
       ' Apro pagina di selezione della lavorazione
       Dim m_ChangeToolPage = New ChangeToolWD(m_MainWindow)
@@ -667,7 +674,7 @@ Public Class SplitPageUC
 
       ' se seleziono "Ok" allora resetto tutte le lavorazioni del progetto
       If m_ChangeToolPage.DialogResult Then
-         EgtSetInfo(EntId, DEF_MACHINING, m_ChangeToolPage.NewSawing)
+         EgtSetInfo(EntId, sDefMach, m_ChangeToolPage.NewSawing)
          Dim Index As Integer = 0
          For Index = 0 To m_MachiningList.Count() - 1
             If m_MachiningList(Index).m_nId = nMchId Then
@@ -697,13 +704,20 @@ Public Class SplitPageUC
       End If
    End Sub
 
-   Public Sub GetCurrSawingandSaw(ByVal nMchId As Integer, ByRef sSawing As String, ByRef sNameTool As String)
+   Public Sub GetCurrSawingAndSaw(ByVal nMchId As Integer, ByRef sSawing As String, ByRef sNameTool As String)
       Dim EntId As Integer = GDB_ID.NULL
       Dim SubEntId As Integer = GDB_ID.NULL
       EgtSetCurrMachining(nMchId)
       If Not EgtGetMachiningGeometry(0, EntId, SubEntId) Then Return
+      ' verifico se la lavorazione selezionata ha un angolo di inclinazione
+      Dim dSideAng As Double = 0.0
+      EgtGetMachiningParam(MCH_MP.SIDEANGLE, dSideAng)
+      Dim sDefMach As String = DEF_MACHINING
+      If Math.Abs(dSideAng) > EPS_ANG_SMALL Then
+         sDefMach = DEF_MACHINING_TILTED
+      End If
       ' Eventualmente recupero il nome della lavorazione
-      EgtGetInfo(EntId, DEF_MACHINING, sSawing)
+      EgtGetInfo(EntId, sDefMach, sSawing)
       If String.IsNullOrEmpty(sSawing) Then sSawing = m_MainWindow.m_CurrentMachine.sCurrSawing
       ' Imposto la lavorazione corrente
       EgtMdbSetCurrMachining(sSawing)
@@ -846,7 +860,7 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub AddTopText(ByRef sName As String)
-      sName &= "  Top"
+      sName &= EgtMsg(91217)    '   Top
    End Sub
 
    Private Sub RemovePauseText(ByRef sName As String)
@@ -932,12 +946,12 @@ Public Class SplitPageUC
    Private Sub SetLayNbArrTgBtn_Click()
       If LayNbArrTgBtn.IsChecked Then
          StatusOffNumbArrow(GDB_ST.ON_)
-         LayNbArrTgBtn.ToolTip = "Hide"
+         LayNbArrTgBtn.ToolTip = EgtMsg(91218)    ' Hide
          Dim Img As ImageSource = ImageConverter.ConvertFromString("pack://application:,,,/Resources/NewIcons/LightArrowOn.png")
          LayNbArrImg.Source = Img
       Else
          StatusOffNumbArrow(GDB_ST.OFF)
-         LayNbArrTgBtn.ToolTip = "Show"
+         LayNbArrTgBtn.ToolTip = EgtMsg(91219)    ' Show
          Dim Img As ImageSource = ImageConverter.ConvertFromString("pack://application:,,,/Resources/NewIcons/LightArrowOff.png")
          LayNbArrImg.Source = Img
       End If
@@ -2421,7 +2435,7 @@ Public Class SplitPageUC
       ' eventualmente stampo messaggio
       If Not m_bAreHomogeneous Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Lavorazioni non omogenee")
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91220))      ' Lavorazioni non omogenee
       Else
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       End If

Constants/ConstGen.vb

@@ -327,6 +327,8 @@ Module ConstGen
    Public Const SPLIT_CUT As String = "SplitCut"
    ' Forzo specifica lavorazione
    Public Const DEF_MACHINING As String = "Def_Machining"
+   ' Forzo specifica lavorazione solo per tagli con inclinazione
+   Public Const DEF_MACHINING_TILTED As String = "Def_Machining_Tilted"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

DirectCuts/DirectCutPageUC.xaml.vb

@@ -179,11 +179,11 @@ Public Class DirectCutPageUC
             Case K_REMOTE
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
-               RemoteBtn.Content = "Remote"
+               RemoteBtn.Content = EgtMsg(90262)      'Remote
             Case K_PARKING
                ParkingBtn.Visibility = Visibility.Visible
                ParkingBtn.Foreground = Brushes.White
-               ParkingBtn.ToolTip = "Parking"
+               ParkingBtn.ToolTip = EgtMsg(90263)     'Parking
          End Select
       Next
    End Sub

DirectCuts/FlatteningCut.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.Reflection
 Imports EgtUILib
 Imports EgtUILib.EgtInterface
+Imports OmagCUT.MainWindow
 
 Public Class FlatteningCut
 
@@ -11,6 +12,8 @@ Public Class FlatteningCut
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
    Private m_bSimul As Boolean = False
+   ' Definizione del taglio diretto di questa pagina
+   Private Const FLATTENING As String = "Flattening"
 
    ' Origine tavola e dati grezzo
    Private m_bRawOk As Boolean = False
@@ -100,15 +103,15 @@ Public Class FlatteningCut
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       WidthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 26)
       OverlapTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 27)
-      ZReleasedTxBl.Text = "Z Svincolo"
+      ZReleasedTxBl.Text = EgtMsg(91235)        'Z Svincolo
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
-      ChainedPathTxBl.Text = "Chained path"
+      ChainedPathTxBl.Text = EgtMsg(91236)      'Chained path
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' tipo di utensile in uso per la lavorazione
       m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_ToolsArray(TOOL.MILL) = "Mill"
+      m_ToolsArray(TOOL.MILL) = EgtMsg(91237)   'Mill
       SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
@@ -725,7 +728,8 @@ Public Class FlatteningCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      EgtSetInfo(nCutId, INFO_DIRECTCUT, 1)
+      ' Inidico che è un taglio Diretto di tipo Flattening
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.Flattening)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       If (m_nTool = TOOL.MILL) Then
@@ -844,8 +848,8 @@ Public Class FlatteningCut
                   End If
                End If
             End If
-               CutsList.Add(nCut2Id)
-            End If
+            CutsList.Add(nCut2Id)
+         End If
          ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
 
       Next
@@ -876,7 +880,8 @@ Public Class FlatteningCut
          Dim ptNear As Point3d
          EgtStartPoint(CutsList(0), ptNear)
          Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
-         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, 1)
+         ' Inidico che è un taglio Diretto di tipo Flattening
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, FlagDirectCuts.Flattening)
          EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
          EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
          ' Se unisco il percorso devo per forza usare la fresa!

DirectCuts/GridCut.xaml

@@ -7,32 +7,32 @@
    mc:Ignorable="d" 
    d:DesignHeight="597.3" d:DesignWidth="256">
 
-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-      <!-- Definizione della Grid MultipleCut -->
-      <Grid Name="SingleCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid MultipleCut -->
+        <Grid Name="SingleCutGrid" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
 
                 <ToggleButton Name="Point1Btn" Grid.Column="0"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
@@ -45,95 +45,150 @@
                 </ToggleButton>
             </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
+            <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+            <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+            <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+            <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
+            <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <Grid Grid.Row="5" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1.5*"/>
-               <ColumnDefinition Width="2"/>
-               <ColumnDefinition Width="1.5*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-            </Grid.RowDefinitions>
+            <!-- STANDARD -->
+            <Grid Name ="StandardGrid" Grid.Row="5" Grid.ColumnSpan="2"> 
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1.5*"/>
+                    <ColumnDefinition Width="2"/>
+                    <ColumnDefinition Width="1.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
 
-            <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
+                <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
 
-            <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
+                <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
+                <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
+                <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
 
-            <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
+                <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
+                <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
+                <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
 
-         </Grid>
+            </Grid>
 
-         <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
+            <!-- SPECIALE -->
+            <Grid Name ="CustomGrid" Grid.Row="5" Grid.ColumnSpan="2">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="2.5*"/>
+                </Grid.RowDefinitions>
+
+                <StackPanel Orientation="Horizontal" Grid.Row="0">
+                    <Button Name="AddCutBtn" Content="+" 
+                            Style="{DynamicResource OmagCut_YellowTextButton}"
+                            Width="35" Height="35" HorizontalAlignment="Left"/>
+                    <Button Name="RemoveCutBtn" Content="-" 
+                            Style="{DynamicResource OmagCut_YellowTextButton}"
+                            Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+                    <ToggleButton Name="Cut_XTgBtn" Content="X"
+                                  Style="{DynamicResource OmagCut_YellowToggleButton}"
+                                  Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+                    <ToggleButton Name="Cut_YTgBtn" Content="Y"
+                                  Style="{DynamicResource OmagCut_YellowToggleButton}"
+                                  Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+                    <Button Name="UpdateBtn" Content="Update" 
+                            Style="{DynamicResource OmagCut_YellowTextButton}"
+                            Width="85" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+                </StackPanel>
+                
+                <ScrollViewer Background="Transparent" Grid.Row="1"
+                              Margin="0,5,0,0"
+                              VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Hidden">
+                    <ListBox Name="CustomGridLstBx" ScrollViewer.CanContentScroll="False">
+                        <ItemsControl.ItemsPanel>
+                            <ItemsPanelTemplate>
+                                <StackPanel Orientation="Vertical"/>
+                            </ItemsPanelTemplate>
+                        </ItemsControl.ItemsPanel>
+                        <ItemsControl.ItemTemplate>
+                            <DataTemplate>
+                                <Grid Width="210">
+                                    <Grid.ColumnDefinitions>
+                                        <ColumnDefinition Width="5*"/>
+                                        <ColumnDefinition Width="1*"/>
+                                        <ColumnDefinition Width="5*"/>
+                                    </Grid.ColumnDefinitions>
+                                    <EgtWPFLib:EgtTextBox Text="{Binding sNumber}" Grid.Column="0"
+                                                          Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                    <EgtWPFLib:EgtTextBox Text="{Binding sInteraxis}" Grid.Column="2"
+                                                          Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                </Grid>
+                            </DataTemplate>
+                        </ItemsControl.ItemTemplate>
+                    </ListBox>
+                </ScrollViewer>
+            </Grid>
+
+
+            <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+            <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="7" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+            <Grid Grid.Row="7" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
                Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+                <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
                Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+            </Grid>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+            <Grid Grid.Row="11" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
 
                 <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
@@ -146,8 +201,8 @@
                 </Button>
             </Grid>
 
-      </Grid>
+        </Grid>
 
-   </Border>
+    </Border>
 
 </UserControl>

DirectCuts/GridCut.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Collections.ObjectModel
 
 Public Class GridCut
    ' Riferimenti a pagine
@@ -41,6 +42,11 @@ Public Class GridCut
    ' Gestione spessore lama
    Private m_bSawTh As Boolean = False
 
+   ' Gestione griglia Custom
+   Dim m_bCustomGrid As Boolean = False
+   Dim m_ListOfCut_X As New ObservableCollection(Of Cut_Axis)
+   Dim m_ListOfCut_Y As New ObservableCollection(Of Cut_Axis)
+
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -78,21 +84,56 @@ Public Class GridCut
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
-      m_nNumX = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
-      m_dDimX = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
-      m_nNumY = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
       m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
 
+      ' Carico i dati per i tagli di griglia Custom
+      m_bCustomGrid = (GetPrivateProfileInt(S_DIRECTCUTS, "EnambleCustomGrid", 0, m_MainWindow.GetIniFile()) <> 0)
+      If m_bCustomGrid Then
+         LoadCustomData("GridNumDimXCustom", m_ListOfCut_X)
+         LoadCustomData("GridNumDimYCustom", m_ListOfCut_Y)
+      End If
+
       ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
       ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
 
-      m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+   End Sub
+
+   ' Lettura dei dati della griglia Custom
+   Private Sub LoadCustomData(sIpKeyName As String, LocalList As ObservableCollection(Of Cut_Axis))
+      Dim dVal As Double = 0
+      Dim nVal As Integer = 0
+      Dim sVal As String = String.Empty
+      GetPrivateProfileString(S_DIRECTCUTS, sIpKeyName, sVal, sVal, m_MainWindow.GetIniFile())
+      Dim sItems As String() = sVal.Split(";"c)
+      If sItems.Count > 0 Then
+         For Each Item As String In sItems
+            Dim sSubItems As String() = Item.Split(",")
+            If sSubItems.Count = 2 Then
+               If IsNumeric(sSubItems(0)) And IsNumeric(sSubItems(1)) Then
+                  nVal = CInt(sSubItems(0))
+                  StringToDouble(sSubItems(1), dVal)
+                  LocalList.Add(New Cut_Axis(nVal, dVal))
+               End If
+
+            End If
+         Next
+      End If
    End Sub
 
    Private Sub GridCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -131,7 +172,8 @@ Public Class GridCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -140,13 +182,18 @@ Public Class GridCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      SideAngleTxBx.Text = DoubleToString( m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
       NumPzXTxBx.Text = m_nNumX.ToString()
-      DimPzXTxBx.Text = LenToString( m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
       NumPzYTxBx.Text = m_nNumY.ToString()
-      DimPzYTxBx.Text = LenToString( m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
       SideChBx.IsChecked = m_bHeadSide
 
       ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
@@ -162,21 +209,48 @@ Public Class GridCut
       Point1Btn.IsChecked = False
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      If m_bCustomGrid Then
+         StandardGrid.Visibility = Visibility.Hidden
+         CustomGrid.Visibility = Visibility.Visible
+         Cut_XTgBtn.IsChecked = True
+         CustomGridLstBx.ItemsSource = m_ListOfCut_X
+      Else
+         StandardGrid.Visibility = Visibility.Visible
+         CustomGrid.Visibility = Visibility.Hidden
+      End If
+
    End Sub
 
 
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString( m_dDimX, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString( m_dDimY, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString(m_dDimX, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString(m_dDimY, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+
+      If m_bCustomGrid Then
+         Dim sGridNumDimXCustom As String = ""
+         For Index_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            sGridNumDimXCustom &= m_ListOfCut_X(Index_X).sNumber & "," & DoubleToString(m_ListOfCut_X(Index_X).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimXCustom <> "" Then sGridNumDimXCustom = sGridNumDimXCustom.Remove(sGridNumDimXCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimXCustom", sGridNumDimXCustom, m_MainWindow.GetIniFile())
+         Dim sGridNumDimYCustom As String = ""
+         For Index_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            sGridNumDimYCustom &= m_ListOfCut_Y(Index_Y).sNumber & "," & DoubleToString(m_ListOfCut_Y(Index_Y).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimYCustom <> "" Then sGridNumDimYCustom = sGridNumDimYCustom.Remove(sGridNumDimYCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimYCustom", sGridNumDimYCustom, m_MainWindow.GetIniFile())
+      End If
+
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
@@ -315,7 +389,7 @@ Public Class GridCut
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -405,7 +479,7 @@ Public Class GridCut
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -521,6 +595,57 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+#Region "CUSTOM LIST GRID"
+
+   Private Sub CutX_Selected() Handles Cut_XTgBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         Cut_YTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_ListOfCut_X
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub CutY_Selected() Handles Cut_YTgBtn.Click
+      If Cut_YTgBtn.IsChecked Then
+         Cut_XTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_ListOfCut_Y
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub AddCut_Click(sender As Object, e As EventArgs) Handles AddCutBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         m_ListOfCut_X.Add(New Cut_Axis(0, 0))
+      ElseIf Cut_YTgBtn.IsChecked Then
+         m_ListOfCut_Y.Add(New Cut_Axis(0, 0))
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Private Sub RemoveCut_Click(sender As Object, e As EventArgs) Handles RemoveCutBtn.Click
+      Dim CurrIndexListSelected As Integer = -1
+      CurrIndexListSelected = CustomGridLstBx.SelectedIndex
+      If Cut_XTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_X.Count - 1 Then
+            CurrIndexListSelected = m_ListOfCut_X.Count - 1
+         End If
+         m_ListOfCut_X.RemoveAt(CurrIndexListSelected)
+      ElseIf Cut_YTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_Y.Count - 1 Then
+            CurrIndexListSelected = m_ListOfCut_Y.Count - 1
+         End If
+         m_ListOfCut_Y.RemoveAt(CurrIndexListSelected)
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Public Sub Update_Click() Handles UpdateBtn.Click
+      CreateGridCut()
+      EgtDraw()
+   End Sub
+
+#End Region    ' Custom Grid
+
    Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -544,9 +669,9 @@ Public Class GridCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -630,11 +755,18 @@ Public Class GridCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      If m_bCustomGrid Then
+         Return MultiplyCut_1(nLayerId)
+      End If
+      Return MultiplyCut_0(nLayerId)
+   End Function
+
+   Private Function MultiplyCut_0(nLayerId As Integer) As Boolean
       ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
       Dim nType As Integer = 0
-      EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam( If( nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
       ' Ricalcolo lo spessore in base all'inclinazione
       dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
       ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
@@ -656,7 +788,8 @@ Public Class GridCut
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
-
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, FlagDirectCuts.GridCut)
          ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
          ' Recupero spessore lama corrente
          Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
@@ -683,7 +816,8 @@ Public Class GridCut
          ' Arretro il punto di partenza di uno spessore lama
          Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
          Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
-
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutPerpId, INFO_DIRECTCUT, FlagDirectCuts.GridCut)
          ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
          If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
             EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
@@ -711,6 +845,116 @@ Public Class GridCut
       Return True
    End Function
 
+   Private Function MultiplyCut_1(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = If(SideChBx.IsChecked(), -90, 90)
+
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = m_ListOfCut_X(0).dInteraxis
+      Dim nNumPzX As Integer = m_ListOfCut_X(0).nNumber
+
+      Dim dDimPzY As Double = m_ListOfCut_Y(0).dInteraxis
+      Dim nNumPzY As Integer = m_ListOfCut_Y(0).nNumber
+
+      Dim TotLenX As Double = 0
+      For Ind_X As Integer = 0 To m_ListOfCut_X.Count - 1
+         TotLenX = TotLenX + (m_ListOfCut_X(Ind_X).dInteraxis + dThick) * m_ListOfCut_X(Ind_X).nNumber
+      Next
+
+      Dim TotLenY As Double = 0
+      For Ind_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+         TotLenY = TotLenY + (m_ListOfCut_Y(Ind_Y).dInteraxis + dThick) * m_ListOfCut_Y(Ind_Y).nNumber
+      Next
+
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         ' -------------- TAGLI PARALLELI ASSE Y --------------
+         Dim dLenX As Double = dThick + TotLenX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            Dim nCut2Id As Integer = GDB_ID.NULL
+            dDimPzY = m_ListOfCut_Y(IndexList_Y).dInteraxis
+            nNumPzY = m_ListOfCut_Y(IndexList_Y).nNumber
+            ' Calcolo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+            ' Ruoto il vettore di traslazione 
+            vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+            For Index As Integer = 1 To nNumPzY
+               Dim vtPerpMove As Vector3d = Index * vtDelta
+               ' Creo copie
+               nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+               EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutParaId = nCut2Id
+         Next
+
+         ' -------------- TAGLI PARALLELI ASSE X --------------
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + TotLenY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Specchio se è attivo il flag che cambia lato di disegno
+         If SideChBx.IsChecked() Then
+            Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
+            EgtMirror(nCutPerpId, ptStart + Vector3d.FromPolar(dThick / 2, m_dAngO - 90), vtRot, GDB_RT.GLOB)
+            EgtInvertCurve(nCutPerpId)
+         End If
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            Dim nCut3Id As Integer = GDB_ID.NULL
+            dDimPzX = m_ListOfCut_X(IndexList_X).dInteraxis
+            nNumPzX = m_ListOfCut_X(IndexList_X).nNumber
+            ' Calcolo secondo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+            For Index As Integer = 1 To nNumPzX
+               Dim vtPerpMove As Vector3d = vtDelta * Index
+               ' Creo copie
+               nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+               EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutPerpId = nCut3Id
+         Next
+
+      End If
+      Return True
+   End Function
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
@@ -725,10 +969,10 @@ Public Class GridCut
 
    Private Sub NumPzsTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NumPzXTxBx.EgtClosed, NumPzYTxBx.EgtClosed,
                                                                               DimPzXTxBx.EgtClosed, DimPzYTxBx.EgtClosed, SideChBx.Click
-      StringToInt( NumPzXTxBx.Text, m_nNumX)
-      StringToLen( DimPzXTxBx.Text, m_dDimX)
-      StringToInt( NumPzYTxBx.Text, m_nNumY)
-      StringToLen( DimPzYTxBx.Text, m_dDimY)
+      StringToInt(NumPzXTxBx.Text, m_nNumX)
+      StringToLen(DimPzXTxBx.Text, m_dDimX)
+      StringToInt(NumPzYTxBx.Text, m_nNumY)
+      StringToLen(DimPzYTxBx.Text, m_dDimY)
       m_bHeadSide = SideChBx.IsChecked
       ' Disegno il taglio
       CreateGridCut()
@@ -770,4 +1014,56 @@ Public Class GridCut
       Return True
    End Function
 
+End Class
+
+Public Class Cut_Axis
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   ' Numero di tagli con questo interasse
+   Private m_nNumber As Integer = 0
+   Public Property sNumber As String
+      Get
+         Return m_nNumber.ToString
+      End Get
+      Set(value As String)
+         If IsNumeric(value) Then
+            m_nNumber = CInt(value)
+         End If
+      End Set
+   End Property
+   Public ReadOnly Property nNumber As Double
+      Get
+         Return m_nNumber
+      End Get
+   End Property
+
+   ' Distanza dal taglio precedente
+   Private m_dInteraxis As Double = 0.0
+   Public Property sInteraxis As String
+      Get
+         Return LenToString(m_dInteraxis, 2)
+      End Get
+      Set(value As String)
+         Dim PrevValue As Double = m_dInteraxis
+         If Not StringToLen(value, m_dInteraxis) Then m_dInteraxis = PrevValue
+      End Set
+   End Property
+   Public ReadOnly Property dInteraxis As Double
+      Get
+         Return m_dInteraxis
+      End Get
+   End Property
+
+   Public ReadOnly Property UpdateSub As Boolean
+      Get
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.Update_Click()
+         Return True
+      End Get
+   End Property
+
+   Sub New(nNumb As Integer, dInter As Double)
+      m_nNumber = nNumb
+      m_dInteraxis = dInter
+   End Sub
+
 End Class

DirectCuts/MachineButtonsUC.xaml.vb

@@ -136,7 +136,7 @@ Public Class MachineButtonsUC
                   ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
                      CurrToggleBtn.Content = "Z - B"
                   ElseIf StateFlagArray(nIndex) = K_REMOTE Then
-                     CurrToggleBtn.Content = "Remote"
+                     CurrToggleBtn.Content = EgtMsg(90262)     'Remote
                   End If
                Catch ex As Exception
                   EgtOutLog("Error loading content " & StateFlagArray(nIndex))

DirectCuts/SingleCutUC.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.Windows.Threading
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 
 Public Class SingleCutUC
 
@@ -147,6 +148,8 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
+      ' forzo la verifica dell'affondamento in relazione allo spessore del pezzo
+      DepthTxBx_EgtClosed(Nothing, Nothing)
       ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
 
       ' forzo la macchina ad essere visibile fin da subito
@@ -159,7 +162,7 @@ Public Class SingleCutUC
       ' Aggiorno visualizzazione
       EgtDraw()
 
-      ' Avvi il timer
+      ' Avvio il timer
       m_RefreshTimer.Start()
    End Sub
 
@@ -672,6 +675,8 @@ Public Class SingleCutUC
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Inidico che è un taglio Diretto di tipo SingleCut
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleCut)
       ' Imposto se disabilitare l'inversine di direzione del taglio
       If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento

DirectCuts/SingleDrillUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 Imports System.Collections.ObjectModel
 Public Class SingleDrillUC
    ' Riferimenti a pagine
@@ -438,7 +439,8 @@ Public Class SingleDrillUC
       End If
 
       Dim nCutId = EgtCreateCircle(nLayerId, ptStart, m_dDiameter / 2)
-
+      ' Inidico che è un taglio Diretto di tipo SingleDrill
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleDrill)
       ' Calcolo punto di inserimento nel grezzo
       Dim ptMin, ptMax As Point3d
       EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)

DirectCuts/SquaringUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 
 Public Class SquaringUC
 
@@ -368,6 +369,8 @@ Public Class SquaringUC
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Inidico che è un taglio Diretto di tipo Squaring
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, FlagDirectCuts.Squaring)
          ' Imposto affondamento e angolo di fianco sul taglio (solo se non lama STD)
          If Not nType = MCH_TY.SAW_STD Then
             EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)

DrawImport/CompoDimensionUC.xaml

@@ -29,43 +29,43 @@
         </Grid.RowDefinitions>
 
       <TextBlock Name="Label1" Grid.Row="0"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox1" Grid.Column="1" Grid.Row="0" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label2" Grid.Row="1"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox2" Grid.Column="1" Grid.Row="1" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label3" Grid.Row="2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox3" Grid.Column="1" Grid.Row="2" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label4" Grid.Row="3"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox4" Grid.Column="1" Grid.Row="3" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label5" Grid.Row="4"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox5" Grid.Column="1" Grid.Row="4" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label6" Grid.Row="5"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox6" Grid.Column="1" Grid.Row="5" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label7" Grid.Row="6"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox7" Grid.Column="1" Grid.Row="6" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label8" Grid.Row="7"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox8" Grid.Column="1" Grid.Row="7" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label9" Grid.Row="8"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox9" Grid.Column="1" Grid.Row="8" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label10" Grid.Row="9"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox10" Grid.Column="1" Grid.Row="9" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 

DrawImport/DrawPageUC.xaml

@@ -95,7 +95,7 @@
             <Grid Name="TopGrd">
 
                <TextBlock Name="TopTxBl"
-                  Style="{StaticResource OmagCut_ToolsDBTextBlock}" />
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="TopChBx" Style="{StaticResource OmagCut_CheckBox}"
                   HorizontalAlignment="Right" Margin="6,0,6,0"/>
 
@@ -122,7 +122,7 @@
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
 
-            <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
                TextAlignment="Right"/>
             <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>

DrawImport/ImportPageUC.xaml.vb

@@ -84,13 +84,13 @@ Public Class ImportPageUC
       ResetBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 3)                 'Reset
       mmBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 4)                    'mm
       inchBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 5)                  'inch
-      OrderListBtn.Content = EgtMsg(90398)                           'Dati Csv
-      TopBtn.Content = EgtMsg(90384)                                 'Indica Lato Sopra
+      OrderListBtn.Content = EgtMsg(90398)                            'Dati Csv
+      TopBtn.Content = EgtMsg(90384)                                  'Indica Lato Sopra
       PartNumTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 15)                'Numero
       SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
-      FiloTopBtn.Content = EgtMsg(90400)                             'Filo Top
+      FiloTopBtn.Content = EgtMsg(90400)                              'Filo Top
       DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
-      EngraveBtn.Content = "Engrave"
+      EngraveBtn.Content = EgtMsg(91238)                              'Engrave
       DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 

DrawImport/SideAngle.vb

@@ -228,7 +228,7 @@ Module SideAngle
                         EgtSetInfo(EntId, INFO_HEEL, dHeel)
                         Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
                         If Not String.IsNullOrEmpty(sSawingTilted) Then
-                           EgtSetInfo(EntId, DEF_MACHINING, sSawingTilted)
+                           EgtSetInfo(EntId, DEF_MACHINING_TILTED, sSawingTilted)
                         End If
                      End If
                   End If

DrawImport/SideAngleOneForAllWindow.xaml

@@ -0,0 +1,83 @@
+<Window x:Class="SideAngleOneForAllWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="255.9" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True"
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.7*"/>
+            <RowDefinition Height="0.3*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+         <TextBlock Name="TitleTxBl"
+                    Grid.ColumnSpan="3"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <Grid Grid.Row="1"
+               Grid.Column="1">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="A °"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <TextBlock Grid.Column="1" 
+                       Text="T"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <ComboBox Grid.Row="1"
+                      Name="SideAngleOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+            <ComboBox Grid.Row="1"
+                      Grid.Column="1"
+                      Name="SideHeelOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>            
+         </Grid>
+         
+         <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                    IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+      </Grid>
+   </Border>
+</Window>

DrawImport/SideAngleOneForAllWindow.xaml.vb

@@ -0,0 +1,20 @@
+Public Class SideAngleOneForAllWindow
+
+   Sub New()
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      TitleTxBl.Text = EgtUILib.EgtMsg(91253)
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      DialogResult = False
+   End Sub
+
+End Class

DrawImport/SideAngleUc.xaml

@@ -1,17 +1,17 @@
 <UserControl x:Class="SideAngleUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="636.9" d:DesignWidth="255.9">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="1.2*"/>
-         <ColumnDefinition Width="0.3*"/> 
+         <ColumnDefinition Width="0.3*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
       </Grid.ColumnDefinitions>
@@ -34,182 +34,191 @@
          <RowDefinition Height="0.5*"/>-->
       </Grid.RowDefinitions>
 
-      <Grid>
+      <Grid Name="SideAngleGrid" Grid.ColumnSpan="2">
          <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="0.4*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.4*"/>
+            <!--<ColumnDefinition Width="0.4*"/>-->
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
          </Grid.ColumnDefinitions>
-         <Button Name="PrevBtn" Grid.Column="1" Margin="4,0,4,0" Padding="0" Content="&lt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
-         <Button Name="NextBtn" Grid.Column="2" Margin="4,0,4,0" Padding="0" Content="&gt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <Button Name="PrevBtn" Grid.Column="0" Margin="2,0,2,0" Padding="0" Content="&lt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <Button Name="NextBtn" Grid.Column="1" Margin="2,0,2,0" Padding="0" Content="&gt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <CheckBox Name="SideAngleChBx" Grid.Column="2" Margin="2,0,0,0" Padding="0"/>
       </Grid>
 
       <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="A °"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
       <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="T"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-      <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="NewEntity" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="NewA1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="NewA1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+      <EgtWPFLib:EgtTextBox Name="NewH1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+      <TextBlock Name="Entity1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity2" Grid.Row="2" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity3" Grid.Row="3" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity4" Grid.Row="4" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity5" Grid.Row="5" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity6" Grid.Row="6" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity7" Grid.Row="7" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity8" Grid.Row="8" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity9" Grid.Row="9" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                  Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity10" Grid.Row="10" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
-          Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
       <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
-          <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1.5*"/>
-                <ColumnDefinition Width="0.3*"/>
-                <ColumnDefinition Width="0.6*"/>
-                <ColumnDefinition Width="0.6*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-            </Grid.RowDefinitions>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1.5*"/>
+            <ColumnDefinition Width="0.3*"/>
+            <ColumnDefinition Width="0.6*"/>
+            <ColumnDefinition Width="0.6*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+         </Grid.RowDefinitions>
 
-            <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
-               Text="Offset"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
-               Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                    Text="Offset"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
+                               Width="85" Height="30"
+                               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
-               Text="Offset2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
-                <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
-                                      Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30" IsLength="False"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
-                                      Grid.Column="3" Grid.Row="12" 
-                                      Width="40" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            </UniformGrid>
+         <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                    Text="Offset2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
+            <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
+                                  Grid.Column="2" Grid.Row="12"
+                                  Width="40" Height="30" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
+                                  Grid.Column="3" Grid.Row="12" 
+                                  Width="40" Height="30"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         </UniformGrid>
 
 
-            <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
-               Text="Affondamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                    Text="Affondamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
-               Text="Accorciamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
-               Text="Angolo"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30" IsLength="False"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                    Text="Accorciamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+                    Text="Angolo"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-        </Grid>
+      </Grid>
 
-        <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
+      <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
                Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" Grid.Column="1" Grid.ColumnSpan="3" Grid.Row="11" Width="90"

DrawImport/SideAngleUc.xaml.vb

@@ -171,25 +171,25 @@ Public Class SideAngleUC
 
       ' Aggiorno valori
       If m_Mode = ModeOpt.DRIP Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
-         Parameter2TxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dDripShort = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
+         Parameter2TxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
+         Parameter4TxBx.Text = LenToString(m_dDripShort, 3)
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
-         m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
+         m_nEngrNbr2 = GetPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
          m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
          m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
          Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
-         Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
+         Parameter2bTxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
          Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
          Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
@@ -311,8 +311,14 @@ Public Class SideAngleUC
       ' Attualmente il vaore m_nCount è inizializzato ad "1"..
       ' Bottoni Prev Next
       If m_nCount <= MAX_LINES Then
-         PrevBtn.Visibility= Windows.Visibility.Hidden
-         NextBtn.Visibility= Windows.Visibility.Hidden
+         PrevBtn.Visibility = Windows.Visibility.Hidden
+         NextBtn.Visibility = Windows.Visibility.Hidden
+         SideAngleChBx.Visibility = Windows.Visibility.Hidden
+
+         NewEntity.Visibility = Windows.Visibility.Hidden
+         NewA1.Visibility = Windows.Visibility.Hidden
+         NewA1TxBx.Visibility = Windows.Visibility.Hidden
+         NewH1TxBx.Visibility = Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -320,6 +326,8 @@ Public Class SideAngleUC
          Grid.SetRow(NextBtn, MAX_LINES - m_nShow)
          NextBtn.Visibility = Windows.Visibility.Visible
          NextBtn.IsEnabled = (m_nCount > m_nCurrPage * MAX_LINES)
+         Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+         SideAngleChBx.Visibility = Windows.Visibility.Visible
       End If
 
       ' Intestazione per angoli di lato
@@ -335,6 +343,8 @@ Public Class SideAngleUC
             Grid.SetRow(HeelBl, MAX_LINES - m_nShow)
             HeelBl.Text = EgtMsg(91654)  ' T
             HeelBl.Visibility = Windows.Visibility.Visible
+            Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+            SideAngleChBx.Visibility = Windows.Visibility.Visible
          End If
       Else
          If m_nCount = 0 Then
@@ -371,7 +381,7 @@ Public Class SideAngleUC
                GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
             End If
          End If
-            Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
+         Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
          GetTxBlFromIndex(Index).Text = If(m_Mode = ModeOpt.SIDEANGLE,
                                            m_SideAngleEntityList(TxBlIndex).sEntityName,
                                            m_DripEntityList(TxBlIndex).sEntityName)
@@ -391,6 +401,145 @@ Public Class SideAngleUC
       Next
    End Sub
 
+   Private Sub CheckedSideAngle() Handles SideAngleChBx.Checked
+      Grid.SetRow(NewEntity, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewA1TxBx, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewH1TxBx, MAX_LINES - m_nShow + 1)
+
+      NewEntity.Text = "A#"
+      ' Se interrompo la creazione di un unico SideAng
+      If Not GetSideAngleFromAllEntities() Then Return
+
+      PrevBtn.Visibility = Visibility.Collapsed
+      NextBtn.Visibility = Visibility.Collapsed
+
+      NewEntity.Visibility = Visibility.Visible
+      NewA1TxBx.Visibility = Visibility.Visible
+      NewH1TxBx.Visibility = Visibility.Visible
+
+      Entity1.Visibility = Visibility.Collapsed
+      A1TxBx.Visibility = Visibility.Collapsed
+      H1TxBx.Visibility = Visibility.Collapsed
+
+      Entity2.Visibility = Visibility.Collapsed
+      A2TxBx.Visibility = Visibility.Collapsed
+      H2TxBx.Visibility = Visibility.Collapsed
+
+      Entity3.Visibility = Visibility.Collapsed
+      A3TxBx.Visibility = Visibility.Collapsed
+      H3TxBx.Visibility = Visibility.Collapsed
+
+      Entity4.Visibility = Visibility.Collapsed
+      A4TxBx.Visibility = Visibility.Collapsed
+      H4TxBx.Visibility = Visibility.Collapsed
+
+      Entity5.Visibility = Visibility.Collapsed
+      A5TxBx.Visibility = Visibility.Collapsed
+      H5TxBx.Visibility = Visibility.Collapsed
+
+      Entity6.Visibility = Visibility.Collapsed
+      A6TxBx.Visibility = Visibility.Collapsed
+      H6TxBx.Visibility = Visibility.Collapsed
+
+      Entity7.Visibility = Visibility.Collapsed
+      A7TxBx.Visibility = Visibility.Collapsed
+      H7TxBx.Visibility = Visibility.Collapsed
+
+      Entity8.Visibility = Visibility.Collapsed
+      A8TxBx.Visibility = Visibility.Collapsed
+      H8TxBx.Visibility = Visibility.Collapsed
+
+      Entity9.Visibility = Visibility.Collapsed
+      A9TxBx.Visibility = Visibility.Collapsed
+      H9TxBx.Visibility = Visibility.Collapsed
+
+      Entity10.Visibility = Visibility.Collapsed
+      A10TxBx.Visibility = Visibility.Collapsed
+      H10TxBx.Visibility = Visibility.Collapsed
+   End Sub
+
+   Private Sub UnCheckSideAngle() Handles SideAngleChBx.Unchecked
+      NewEntity.Visibility = Visibility.Collapsed
+      NewA1TxBx.Visibility = Visibility.Collapsed
+      NewH1TxBx.Visibility = Visibility.Collapsed
+
+      TxBlChBxView()
+      RefreshCheckAndValue()
+   End Sub
+
+   Private Function GetSideAngleFromAllEntities() As Boolean
+      Dim tmpSideAngleList As New List(Of Double)
+      tmpSideAngleList.Clear()
+      Dim tmpSideHeelList As New List(Of Double)
+      tmpSideHeelList.Clear()
+      Dim m_SideAngleOneForAllWindow As New SideAngleOneForAllWindow
+
+      For i As Integer = 0 To m_SideAngleEntityList.Count - 1
+         If Not tmpSideAngleList.Contains(m_SideAngleEntityList(i).dSideAngle) Then
+            tmpSideAngleList.Add(m_SideAngleEntityList(i).dSideAngle)
+         End If
+         If Not tmpSideHeelList.Contains(m_SideAngleEntityList(i).dSideHeel) Then
+            tmpSideHeelList.Add(m_SideAngleEntityList(i).dSideHeel)
+         End If
+      Next
+      NewA1TxBx.Text = DoubleToString(tmpSideAngleList(0), 2)
+      NewH1TxBx.Text = LenToString(tmpSideHeelList(0), 2)
+
+      If tmpSideAngleList.Count > 1 Or tmpSideHeelList.Count > 1 Then
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.ItemsSource = tmpSideAngleList
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.ItemsSource = tmpSideHeelList
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.ShowDialog()
+         If m_SideAngleOneForAllWindow.DialogResult Then
+            NewA1TxBx.Text = DoubleToString(m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedItem, 2)
+            NewH1TxBx.Text = LenToString(m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedItem, 2)
+            UpdateSideAngleAllEntities()
+            UpdateHeelAllEntities()
+         Else
+            SideAngleChBx.IsChecked = False
+            Return False
+         End If
+      End If
+      Return True
+   End Function
+
+   Private Sub UpdateHeelAllEntities()
+      ' Nuovo tallone
+      Dim dSideHeel As Double
+      StringToLen(NewH1TxBx.Text, dSideHeel)
+      ' Verifico stia nei limiti
+      If dSideHeel < 0 Then
+         dSideHeel = 0
+         NewH1TxBx.Text = "0"
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideHeel(Entity.sEntityName, dSideHeel)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
+
+   Private Sub UpdateSideAngleAllEntities()
+      ' Nuovo angolo di inclinazione
+      Dim dSideAngle As Double
+      StringToDouble(NewA1TxBx.Text, dSideAngle)
+      ' Verifico stia nei limiti
+      If dSideAngle < -m_dMaxSideAng Then
+         dSideAngle = -m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      ElseIf dSideAngle > m_dMaxSideAng Then
+         dSideAngle = m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideAngle(Entity.sEntityName, dSideAngle)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
 
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
    Private Function GetChBxFromIndex(Index As Integer) As CheckBox
@@ -495,15 +644,15 @@ Public Class SideAngleUC
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
 
    ' quando esco salvo nel file l'ultima configurazione per le incisioni
-   Private Sub SideAngleUC_Unloaded( sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+   Private Sub SideAngleUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Ricavo nome pezzo
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
          ' Svuoto layer in cui sono presenti i testi con le inclinazioni dei lati
          If m_Mode = ModeOpt.SIDEANGLE Then
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          Else
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          End If
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Nessuna azione necessaria
@@ -516,7 +665,7 @@ Public Class SideAngleUC
          'WritePrivateProfileString( S_SIDES, K_DRIPSHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3), m_MainWindow.GetIniFile())
-         WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
@@ -527,7 +676,6 @@ Public Class SideAngleUC
       EgtDraw()
    End Sub
 
-
    ' aggiunge il messaggio nel disegno, se DripGeom creo la geometria
    Private Sub RefreshSideAngleText()
       Dim PartId As Integer = GDB_ID.NULL
@@ -538,7 +686,7 @@ Public Class SideAngleUC
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
-         ElseIf m_CallingPage = MainWindow.Pages.Import Then
+      ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
          ' Recupero nome pezzo
@@ -600,7 +748,7 @@ Public Class SideAngleUC
          For nIndex As Integer = 1 To m_nCount
             Dim Entity As DripEntity = m_DripEntityList(nIndex - 1)
             ' Imposto check box (se sono stati definiti il numero corretto di CheckBox
-            If nIndex < ( m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
+            If nIndex < (m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
             Dim nChIndex As Integer = nIndex - (m_nCurrPage - 1) * MAX_LINES + MAX_LINES - m_nShow
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
@@ -973,15 +1121,15 @@ Public Class SideAngleUC
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
       If m_nCurrPage = 1 Then Return
       m_nCurrPage -= 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      If m_nCount <= ( m_nCurrPage - 1) * MAX_LINES Then Return
+      If m_nCount <= (m_nCurrPage - 1) * MAX_LINES Then Return
       m_nCurrPage += 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
@@ -993,7 +1141,7 @@ Public Class SideAngleUC
          Dim bVal As Boolean = CurrCheckBox.IsChecked()
          Dim SideIndex As Integer = CInt(CurrCheckBox.Name.Substring(1))
          ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-         Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+         Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
          Dim sCurrSide As String = m_DripEntityList(nCurrSide - 1).sEntityName
          ' aggiorno l'entità con i valori scritti nel campo di testo
          Dim CurrEntity As DripEntity = DripEntity.FindEntity(sCurrSide)
@@ -1179,6 +1327,19 @@ Public Class SideAngleUC
       End If
    End Sub
 
+   '------->   riga nuova
+   Private Sub NewA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewA1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateSideAngleAllEntities()
+      End If
+   End Sub
+
+   Private Sub NewH1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewH1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateHeelAllEntities()
+      End If
+   End Sub
+
    Private Sub SetSideAngleFromTxBx(SideIndex As Integer, AngleTxBx As EgtWPFLib.EgtTextBox)
       ' Nuovo angolo di inclinazione
       Dim dSideAngle As Double
@@ -1192,7 +1353,7 @@ Public Class SideAngleUC
          AngleTxBx.Text = DoubleToString(dSideAngle, 2)
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideAngle(sCurrSide, dSideAngle)
@@ -1262,7 +1423,7 @@ Public Class SideAngleUC
          HeelTxBx.Text = "0"
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideHeel(sCurrSide, dSideHeel)
@@ -1305,13 +1466,13 @@ Public Class SideAngleUC
          EgtSetInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE, dSideAngle)
          Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
          If Not String.IsNullOrEmpty(sSawingTilted) Then
-            EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING, sSawingTilted)
+            EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED, sSawingTilted)
          End If
          ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE)
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE)
-         EgtRemoveInfo(CurrEntity.nGeomId, DEF_MACHINING)
+         EgtRemoveInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED)
       End If
       ' Aggiorno lista entità con nuova inclinazione
       CurrEntity.dSideAngle = dSideAngle
@@ -1329,7 +1490,7 @@ Public Class SideAngleUC
       ' Scrivo nuovo tallone nelle info
       If dSideHeel > 10 * EPS_SMALL Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_HEEL, dSideHeel)
-      ' Cancello inclinazione nell'apposito campo info
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_HEEL)
       End If

Machine/CurrentMachine.vb

@@ -1320,7 +1320,7 @@ Public Class CurrentMachine
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAW, Nothing, m_sCurrSaw, sMachIniFile)
       ' lama inclinata
-      If m_nShowToolChanger = 4 Then
+      If m_MountedToolConfig = 4 Then
          GetPrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, Nothing, m_sCurrSawTilted, sMachIniFile)
       Else
          ' se non è configurato il cambio utensile e allora imposto l'unica lama disponibile per i tagli inclinati

Machine/MachineCNPageUC.xaml.vb

@@ -41,7 +41,7 @@ Public Class MachineCNPageUC
       If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
          PowerONBtn.Content = "ON"
          PowerOFFBtn.Content = "OFF"
-         PowerGpBx.Header = "Power"
+         PowerGpBx.Header = EgtMsg(90974)    'Power
       Else
          PowerGpBx.Visibility = Visibility.Collapsed
       End If
@@ -49,7 +49,7 @@ Public Class MachineCNPageUC
       ' verifico che sia attiva la modalità per l'uso di due fotocamere
       If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
          CameraHQ.Visibility = Visibility.Visible
-         CameraHQ.Header = "Photo on table"
+         CameraHQ.Header = EgtMsg(90975)     'Photo on table
          CameraHQBtn.Content = "HQ"
          ' verifico quale camera è impostata
          If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
@@ -177,7 +177,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Start_Cycle"
+         sDBVarPath &= EgtMsg(90976)                                     ' Start_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")     ' Modalità manuale
       Else
          m_CN.DGeneralFunctions_CycleStart()
@@ -188,7 +188,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Stop_Cycle"
+         sDBVarPath &= EgtMsg(90977)                                     ' Stop_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 0, 0, 0, "")     ' Modalità manuale
       Else
          m_CN.DGeneralFunctions_FeedHold()
@@ -199,7 +199,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Reset_Cycle"
+         sDBVarPath &= EgtMsg(90978)                                     ' Reset_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")     ' Modalità manuale
       Else
          Call m_CN.DGeneralFunctions_Reset()

Machine/MachiningDbPageUC.xaml.vb

@@ -79,8 +79,8 @@ Public Class MachiningDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 16)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
-      ExportBtn.Content = "Export"
-      ImportBtn.Content = "Import"
+      ExportBtn.Content = EgtMsg(91126)    ' Export
+      ImportBtn.Content = EgtMsg(91127)    ' Import
 
       NameTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 1)
       DepthTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 2)

Machine/SetUpPage.xaml.vb

@@ -1105,8 +1105,8 @@ Public Class SetUpPage
    ' Funzione che genera il file di setup corrente (per Cam5 e Office)
    Private Sub SaveSetUpFile()
       If m_CurrMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then Return
-      Dim sContentFile As String = "; this file has been created by program OmagCUT by current setup" & vbCrLf
-      sContentFile &= "[General]" & vbCrLf
+      Dim sContentFile As String = EgtMsg(91239) & vbCrLf     ' ; this file has been created by program OmagCUT by current setup
+      sContentFile &= EgtMsg(91240) & vbCrLf                  ' [General]
       For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
          Dim sToolName As String = ToolPosition.sTool
          Dim sPositionName As String = ToolPosition.sName

MainWindow.xaml.vb

@@ -149,6 +149,19 @@ Class MainWindow
       Options
    End Enum
 
+   ' Elenco delle operazioni tagli diretti (decoficiato in CamAuto per riconoscere il tipo taglio diretto)
+   Friend Enum FlagDirectCuts
+      ManualMove = 1
+      SingleCut = 2
+      GridCut = 3
+      SingleDrill = 4
+      Flattening = 5
+      Squaring = 6
+      SawTest = 7
+      Polishing = 8
+      CopyTemplate = 9
+   End Enum
+
    Public Function GetExeRootDir() As String
       Return m_sExeRoot
    End Function

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.7.6.1")>
-<Assembly: AssemblyFileVersion("2.7.6.1")>
+<Assembly: AssemblyVersion("2.7.6.2")>
+<Assembly: AssemblyFileVersion("2.7.6.2")>

NcComm/M_Num.vb

@@ -1651,6 +1651,11 @@ Namespace Num
 
          n_ret = objDGeneralFunctions.ActivateProgram(l_glbPartProgramNumber, 0)
 
+         If n_ret <> 0 Then
+            EgtOutLog("Error: ActivateProgram error : " + n_ret.ToString())
+            Return n_ret
+         End If
+
          Return n_ret
 
       End Function
@@ -1698,17 +1703,24 @@ Namespace Num
          Dim ngroup0 As Short = 0
          Dim nTimeOut As Integer = 0
          bSetModeDone = False
+
+         ' ' Per prima versione FLEXIUM (3.5.040 - 2013)
+         ' EgtOutLog("Scrittura modalità (" & nmode.ToString & ")")
+         ' objDGeneralFunctions.WriteCncMode(nmode, ngroup0)
+         ' Return 0
+
+         ' Per ultime versioni FLEXIUM
          objDGeneralFunctions.WriteCncMode2(nHandle, nmode, ngroup0)
          While Not bSetModeDone And nTimeOut < SHORTSLEEPCOUNT
             System.Threading.Thread.Sleep(SHORTSLEEPTIME)
             nTimeOut += 1
          End While
          If Not bSetModeDone Then
-            EgtOutLog("Errore cambio modalit� in MDI: " & TIMEOUT)
+            EgtOutLog("Errore cambio modalità in MDI: " & TIMEOUT)
             Return TIMEOUT   'Errore di timeout
          End If
          If nSetModeResult <> 0 Then
-            EgtOutLog("Errore 2 cambio modalit� in MDI: " & nSetModeResult)
+            EgtOutLog("Errore 2 cambio modalità in MDI: " & nSetModeResult)
          End If
          Return nSetModeResult
 

OmagCUT.vbproj

@@ -218,6 +218,9 @@
     <Compile Include="DrawImport\FiloTopUC.xaml.vb">
       <DependentUpon>FiloTopUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DrawImport\SideAngleOneForAllWindow.xaml.vb">
+      <DependentUpon>SideAngleOneForAllWindow.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\UnderDrillUC.xaml.vb">
       <DependentUpon>UnderDrillUC.xaml</DependentUpon>
     </Compile>
@@ -512,6 +515,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="DrawImport\SideAngleOneForAllWindow.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\UnderDrillUC.xaml">
       <SubType>Designer</SubType>
       <Generator>XamlIntelliSenseFileGenerator</Generator>

OmagCUTDarkDictionary.xaml

@@ -387,7 +387,7 @@
       <Setter Property="Keyboard" Value="Calculator"/>
       <Setter Property="KeyboardDimension" Value="300"/>
       <Setter Property="Background" Value="#636974"/>
-      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
    </Style>
 
    <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">
@@ -509,6 +509,7 @@
       <!--<Setter Property="BorderBrush" Value="{StaticResource OmagCut_Yellow}"/>-->
       <Setter Property="Background" Value="#1C1D22"/>
       <Setter Property="BorderBrush" Value="#1C1D22"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
       <Setter Property="FontSize" Value="{StaticResource FontSize_UpperCaseCharacter}"/>
       <Style.Triggers>
          <Trigger Property="IsChecked" Value="True">
@@ -629,21 +630,21 @@
    <Style x:Key="OmagCut_CenteredLowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">
       <Setter Property="VerticalAlignment" Value="Center"/>
       <Setter Property="HorizontalAlignment" Value="Center"/>
-      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
    </Style>
 
    <Style x:Key="OmagCut_KeyboardTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="Keyboard" Value="Alphanumeric"/>
       <Setter Property="KeyboardDimension" Value="600"/>
       <Setter Property="Background" Value="#636974"/>
-      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
    </Style>
 
    <Style x:Key="OmagCut_LowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}">
       <Setter Property="TextWrapping" Value="Wrap"/>
       <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <Setter Property="VerticalAlignment" Value="Center"/>
-      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
    </Style>
 
    <DataTemplate x:Key="GroupBoxHeaderTemplate">

OmagCUTDictionary.xaml

@@ -1224,6 +1224,7 @@
    </Style>
 
    <Style x:Key="OmagCut_CenteredLowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_Black}"/>
       <Setter Property="VerticalAlignment" Value="Center"/>
       <Setter Property="HorizontalAlignment" Value="Center"/>
    </Style>
@@ -1257,6 +1258,7 @@
    </Style>
 
    <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_Black}"/>
       <Setter Property="Keyboard" Value="Calculator"/>
       <Setter Property="IsLength" Value="True"/>
       <Setter Property="KeyboardDimension" Value="300"/>

Project/AddToDataBaseUC.xaml.vb

@@ -91,7 +91,7 @@ Public Class AddToDataBaseUC
          WritePrivateProfileString(S_SCRAPS, K_LASTBLOCK, EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock, m_OmagPhotoWD.m_MainWindow.GetIniFile())
       End If
       ' aggiorno il testo del messaggio "Add" → "Save"
-      AddBtn.Content = "Save"
+      AddBtn.Content = EgtMsg(91252)      ' Save
 
       ' notifico che da ora la lastra inserita è in modalità di modifica (non salvo la lastra come nuova, ma la sovrascrivo come in modifica)
       EgtPHOTOLib.PhotoMap.refProjectVM.SetSelProjectMode(ProjectSlabVM.ProjectModeOpt.DETAIL)

Project/OmagPhotoWD.xaml.vb

@@ -145,7 +145,7 @@ Public Class OmagPhotoWD
          m_AddToDataBaseUC.ThicknessTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness
          m_AddToDataBaseUC.ProjectTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo
          ' aggiorno il testo del messaggio "Add" → "Save"
-         m_AddToDataBaseUC.AddBtn.Content = "Save"
+         m_AddToDataBaseUC.AddBtn.Content = EgtMsg(91252)      ' Save
          Return
       End If
       ' inizializzo i campi

Project/ProjectMgrUC.xaml.vb

@@ -35,7 +35,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
-      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Other Reset (Shift)"
+      ResetCutBtn.ToolTip = EgtMsg(91241) & vbCrLf & EgtMsg(91242)     ' Reset Cuts - Other Reset (Shift)
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -142,7 +142,7 @@ Public Class ProjectMgrUC
       End If
       Dim nCountTable As Integer = GetTableCount()
       Select Case nCountTable
-         Case 4, 2
+         Case 4, 3, 2
             ' visualizzo l'elenco dei bottoni associati alle tavole disponibili
             Dim SelTabWD As New SelectTableWD(m_MainWindow)
             SelTabWD.ShowDialog()
@@ -1029,7 +1029,7 @@ Public Class ProjectMgrUC
             End If
          Next
       Next
-      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(91243) & nMachUpdated & "/ " & nMach)      ' Lavorazione aggiornate: 
    End Sub
 
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------

Project/SceneButtonsUC.xaml.vb

@@ -6,7 +6,7 @@ Public Class SceneButtonsUC
    Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private Sub Init() Handles Me.Initialized
-      TopViewBtn.ToolTip = "Top View" & vbCrLf & "Select View (Shift)"
+      TopViewBtn.ToolTip = EgtMsg(91244) & vbCrLf & EgtMsg(91245)    ' Top View - Select View (Shift)
    End Sub
 
    Private Sub MeasureBtn_Checked(sender As Object, e As RoutedEventArgs) Handles MeasureBtn.Checked

Project/ScrapsWD.xaml.vb

@@ -17,7 +17,7 @@ Public Class ScrapsWD
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
 
       ' inserisco il titolo della pagina aperta
-      TitleTxBl.Content = "Scraps List"
+      TitleTxBl.Content = EgtMsg(91246)        ' Scraps List
       ScrapsListBox.ItemsSource = m_ScrapList
       ' definzione posizione finetra
       Me.Left = 25
@@ -137,7 +137,7 @@ Public Class ScrapsWD
          MyOmagPhotoWD.ShowDialog()
       Else
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Error loading contour scrap")
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(91247))     ' Error loading contour scrap
       End If
 
       ' ripristino il contesto corrente dell'immagine

RawPhoto/OtherRefTabWD.xaml.vb

@@ -40,10 +40,10 @@ Public Class OtherRefTabWD
       ' posiziono la finestra
       Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
-      RefRawTxbl.Text = "Raw reference"
-      RefTabXTxbl.Text = "Position X"
-      RefTabYTxbl.Text = "Position Y"
-      SelRefTxbl.Text = "Sel reference"
+      RefRawTxbl.Text = EgtMsg(91248)     ' Raw reference
+      RefTabXTxbl.Text = EgtMsg(91249)    ' Position X
+      RefTabYTxbl.Text = EgtMsg(91250)    ' Position Y
+      SelRefTxbl.Text = EgtMsg(91251)     ' Sel reference
       RefTabOrientationCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabOrientationList
       RefTabOrientationCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
       RefTabCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList

RawPhoto/RawPartPageUC.xaml.vb

@@ -162,18 +162,18 @@ Public Class RawPartPageUC
       KerfTxBx.Tag = KerfTxBl
 
       ' Creo lista modalità di definizione del grezzo
-      m_RawModeList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)           'Rettangolo
-      m_RawModeList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)           'Per Punti
-      m_RawModeList(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)          'Da Laser
+      m_RawModeList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)              'Rettangolo
+      m_RawModeList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)              'Per Punti
+      m_RawModeList(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)             'Da Laser
       If m_MainWindow.m_CurrentMachine.bSaw Then
          m_RawModeList(3) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)        'Da Lama
       Else
          ' se non insrisco "Lama" allora ridimensiono il vettore
          ReDim Preserve m_RawModeList(2)
       End If
-      m_RawModeListEx(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)         'Rettangolo
-      m_RawModeListEx(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)         'Per Punti
-      m_RawModeListEx(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)        'Da Laser
+      m_RawModeListEx(0) = EgtMsg(MSG_RAWPARTPAGEUC + 1)            'Rettangolo
+      m_RawModeListEx(1) = EgtMsg(MSG_RAWPARTPAGEUC + 2)            'Per Punti
+      m_RawModeListEx(2) = EgtMsg(MSG_RAWPARTPAGEUC + 30)           'Da Laser
       If m_MainWindow.m_CurrentMachine.bSaw Then
          m_RawModeListEx(3) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)      'Da Lama
          m_RawModeListEx(4) = EgtMsg(MSG_RAWPARTPAGEUC + 35)        'Da Fotografia
@@ -185,14 +185,14 @@ Public Class RawPartPageUC
       RawModeCmBx.ItemsSource = m_RawModeList
 
       ' Creo la lista dei riferimenti tavola 
-      m_OtherRefTabOrientationList(OTHERREFMODE.BL) = "Bottom left"
-      m_OtherRefTabOrientationList(OTHERREFMODE.BR) = "Bottom right"
-      m_OtherRefTabOrientationList(OTHERREFMODE.TR) = "Top right"
-      m_OtherRefTabOrientationList(OTHERREFMODE.TL) = "Top left"
+      m_OtherRefTabOrientationList(OTHERREFMODE.BL) = EgtMsg(91221) 'Bottom left
+      m_OtherRefTabOrientationList(OTHERREFMODE.BR) = EgtMsg(91222) 'Bottom right
+      m_OtherRefTabOrientationList(OTHERREFMODE.TR) = EgtMsg(91223) 'Top right
+      m_OtherRefTabOrientationList(OTHERREFMODE.TL) = EgtMsg(91224) 'Top left
 
       ' lista per selezione RawModeDamaged
-      m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
-      m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
+      m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)       'Per Punti
+      m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)      'Da Laser
       If m_MainWindow.m_CurrentMachine.bSaw Then
          m_RawModeDamagedList(2) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24) 'Da Lama
       Else
@@ -228,10 +228,10 @@ Public Class RawPartPageUC
       AddBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 14)           'Add - Aggiungi
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
-      RectangleBtn.Content = "Rectangle"
+      RectangleBtn.Content = EgtMsg(90501)                      'Rectangle
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
 
-      OtherRefTabTxBl.Text = "New Ref On Tab"
+      OtherRefTabTxBl.Text = EgtMsg(91225)                      'New Ref On Tab
 
    End Sub
 
@@ -1982,7 +1982,7 @@ Public Class RawPartPageUC
          m_CurrProjPage.ClearMessage()
       Else
          OkBtn.IsEnabled = False
-         m_CurrProjPage.SetErrorMessage("Errore nella posizione o dimensione del grezzo")
+         m_CurrProjPage.SetErrorMessage(EgtMsg(91226))     ' Errore nella posizione o dimensione del grezzo
       End If
    End Sub
 

Simulation/SimulationPageUC.xaml.vb

@@ -90,6 +90,12 @@ Public Class SimulationPageUC
       EgtOutLog(" -- PREPARE SIMUL --")
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       Dim bOk As Boolean = True
+      ' Visualizzo opportunamente la macchina
+      m_nMachLook = MCH_LOOK.ALL
+      EgtSetMachineLook(m_nMachLook)
+      ' Imposto vista 3d isometrica di tutto
+      EgtSetView(VT.ISO_SE, False)
+      EgtZoom(ZM.ALL)
       ' Elimino eventuale attrezzaggio da OmagOFFICE
       EgtEraseCurrSetup()
       ' Verifico l'attrezzaggio degli utensili utilizzati
@@ -180,12 +186,6 @@ Public Class SimulationPageUC
       ShowAllCurrPhaseMachinings()
       ' Costringo ad aggiornare UI
       UpdateUI()
-      ' Visualizzo opportunamente la macchina
-      m_nMachLook = MCH_LOOK.ALL
-      EgtSetMachineLook(m_nMachLook)
-      ' Imposto vista 3d isometrica di tutto
-      EgtSetView(VT.ISO_SE, False)
-      EgtZoom(ZM.ALL)
       ' Registro funzione su aggiornamento interfaccia da sotto
       EgtSetProcessEvents(m_ProcEventsCallback)
       EgtSetOutText(m_OutTextCallback)
@@ -214,6 +214,7 @@ Public Class SimulationPageUC
       If m_nIdMinRedX <> GDB_ID.NULL Then EgtSetStatus(m_nIdMinRedX, GDB_ST.OFF)
       Dim m_nIdMinRedY = EgtGetFirstNameInGroup(nIdBase, "MinRedY")
       If m_nIdMinRedY <> GDB_ID.NULL Then EgtSetStatus(m_nIdMinRedY, GDB_ST.OFF)
+      EgtOutLog(" -- END PREPARE SIMUL --")
    End Sub
 
    Private Sub StepBtn_Click(sender As Object, e As RoutedEventArgs) Handles StepBtn.Click
@@ -622,7 +623,7 @@ Public Class SimulationPageUC
       ' Ripristino come fase corrente quella iniziale
       EgtSetCurrPhase(1)
       If bOk Then
-         m_CurrProjPage.SetInfoMessage("Genarato file " & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+         m_CurrProjPage.SetInfoMessage(EgtMsg(90571) & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)    ' Genarato file 
       Else
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
       End If