Merge branch 'Features/Refactory_WaterJet_Lib' into develop

CadCuts/SplitPageUC.xaml.vb

@@ -1467,8 +1467,37 @@ Public Class SplitPageUC
          ' assegno numerazione
          NumberDirectionMachining(nI)
       Next
+
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      Dim ActiveMachLst As New List(Of Integer)
+      For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+         ActiveMachLst.Add(ItemSplitMach.Ind)
+      Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+
       ' Preparo la lista degli Item
       ShowMachiningList()
+
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+
+      For Each Item As SplitMach In m_MachiningList
+         EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
+      Next
+
+      For nIndex As Integer = 0 To ActiveMachLst.Count - 1
+         For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+            If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
+               EgtRemoveInfo(m_MachiningList(ItemSplitMach.Ind).m_nId, INFO_MCH_USER_OFF)
+               m_MachiningList(ItemSplitMach.Ind).m_bEnabled = True
+               ItemSplitMach.bIsActive = True
+               ' sistemo colore
+               ColorMachining(m_MachiningList(ItemSplitMach.Ind))
+               Exit For
+            End If
+         Next
+      Next
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+
       ' Aggiorno visualizzazione
       EgtDraw()
       ' Aggiono abilitazione bottoni

Constants/ConstGen.vb

@@ -214,7 +214,8 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
-   Public CONST INFO_AGG2 As String = "Agg2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone

Constants/ConstIni.vb

@@ -133,6 +133,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
@@ -141,6 +142,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"

DirectCuts/FlatteningCut.xaml.vb

@@ -66,6 +66,7 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
       m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
@@ -614,9 +615,11 @@ Public Class FlatteningCut
 
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
+      ' vedere nella pagina Allarm il capito "Incisioni"
+      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
-      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) Then
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -652,6 +655,9 @@ Public Class FlatteningCut
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
+      End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)

DrawImport/AlzFrontUC.xaml.vb

@@ -76,9 +76,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
-      Parameter5TxBl.Text = "Spessore"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub

DrawImport/CompoDimensionUC.xaml.vb

@@ -336,6 +336,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -379,5 +380,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/DrawPageUC.xaml.vb

@@ -41,6 +41,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -360,6 +363,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -462,21 +467,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -484,6 +493,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -1362,6 +1373,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1375,25 +1388,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True

DrawImport/FiloTopUC.xaml

@@ -41,7 +41,11 @@
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
-   </Grid>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Center" Margin="0,0,6,0"/>
+    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,6 +25,13 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
@@ -43,14 +52,18 @@ Public Class FiloTopUC
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
       m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
       ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
       m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -74,6 +87,8 @@ Public Class FiloTopUC
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -95,4 +110,161 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+               nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/SideAngleUc.xaml.vb

@@ -34,6 +34,7 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
 
    Private CurrEntityDrip As DripEntity
@@ -133,9 +134,18 @@ Public Class SideAngleUC
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -156,12 +166,12 @@ Public Class SideAngleUC
          m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
          Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -489,6 +499,7 @@ Public Class SideAngleUC
          WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
       End If
 
@@ -635,7 +646,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -830,6 +841,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -840,10 +854,14 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -866,11 +884,12 @@ Public Class SideAngleUC
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1304,11 +1323,16 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub
 

Machine/CurrentMachine.vb

@@ -1327,7 +1327,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità (solo se è vuota)
       If m_Qualities.Count < 1 Then
          m_Qualities.Add("Q1")
@@ -1358,7 +1358,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       Dim sItems() As String = sCurMat.Split("."c)
       If sItems.Count > 1 Then
          Dim sMat As String = sItems(0)

Machine/MachinePageUC.xaml.vb

@@ -145,12 +145,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                AlarmsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -215,12 +215,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.WaterJet
             'Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                ToolsDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -285,12 +285,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                MachiningDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -358,12 +358,12 @@ Public Class MachinePageUC
             PolishingsBtn.IsChecked = True
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                PolishingsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -513,12 +513,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                TestingPageBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -593,12 +593,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                StatisticsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

Machine/WaterJetPageUC.xaml.vb

@@ -8,18 +8,18 @@ Public Class WaterJetPageUC
 
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-   Private m_refWaterjetDbWindowVM As EgtWPFLib5.WaterjetDbWindowVM
+   Private m_refWaterjetDbWindowVM As WaterjetDbWindowVM_OmagCUT
    Private m_sOrigNewMaterial As String = String.Empty
    Private m_sOrigNewSubMaterial As String = String.Empty
 
    Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
       Me.DataContext = m_refWaterjetDbWindowVM
       EgtWPFLib.Utility.MainWindow = m_MainWindow
    End Sub
 
    Public Sub WaterJetPage_Reinitialize()
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
       Me.DataContext = m_refWaterjetDbWindowVM
    End Sub
 

Machine/WaterjetDbWindowVM.vb

@@ -0,0 +1,60 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib
+
+Public Class WaterjetDbWindowVM_OmagCUT
+   Inherits EgtWPFLib5.WaterjetDbWindowVM
+
+   Public Function CloseWaterjetDb_OmagCut(MainWindow As Window) As SaveWndBtnEnum
+      If bIsModified Then
+         Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveWjDbWnd.m_nPressedBtn
+            Case 1   ' Yes
+               WriteWaterjetDb()
+               bIsModified = False
+               Return SaveWndBtnEnum.YES
+            Case 2   ' No
+               Return SaveWndBtnEnum.NO
+            Case Else   ' Cancel
+               Return SaveWndBtnEnum.CANCEL
+         End Select
+      Else
+         Dim bExitFor As Boolean = False
+         For Each Material As EgtWPFLib5.WjMaterial In MaterialList
+            If Not IsNothing(Material.SubMaterialList) Then
+               For Each SubMaterial As EgtWPFLib5.WjSubMaterial In Material.SubMaterialList
+                  If Not IsNothing(SubMaterial.ParamList) Then
+                     For Each QParam As EgtWPFLib5.WjParam In SubMaterial.ParamList
+                        bExitFor = QParam.IsModified()
+                        If bExitFor Then Exit For
+                     Next
+                  End If
+                  If bExitFor Then Exit For
+               Next
+            End If
+            If bExitFor Then Exit For
+         Next
+         If bExitFor Then
+            Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+            Select Case SaveWjDbWnd.m_nPressedBtn
+               Case 1   ' Yes
+                  WriteWaterjetDb()
+                  bIsModified = False
+                  Return SaveWndBtnEnum.YES
+               Case 2   ' No
+                  Return SaveWndBtnEnum.NO
+               Case Else   ' Cancel
+                  Return SaveWndBtnEnum.CANCEL
+            End Select
+         End If
+      End If
+      Return SaveWndBtnEnum.YES
+   End Function
+
+   Sub New(sMachDir As String)
+      MyBase.New(sMachDir)
+   End Sub
+
+End Class

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -1092,10 +1092,10 @@ Class MainWindow
          Case MachinePageUC.MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
             Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                Return False
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
       End Select
@@ -1825,7 +1825,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.5.4")>
-<Assembly: AssemblyFileVersion("2.4.5.4")>
+<Assembly: AssemblyVersion("2.4.6.1")>
+<Assembly: AssemblyFileVersion("2.4.6.1")>

OmagCUT.vbproj

@@ -205,6 +205,7 @@
     <Compile Include="Machine\ImportExportToolWD.xaml.vb">
       <DependentUpon>ImportExportToolWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Machine\WaterjetDbWindowVM.vb" />
     <Compile Include="Machine\WaterJetPageVM.vb" />
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>

Project/ProjectMgrUC.xaml.vb

@@ -753,7 +753,7 @@ Public Class ProjectMgrUC
       Else
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
       ' aggiorno il disegno
       EgtDraw()