Avvio lo scatto automatico per OmagPHOTO

CadCuts/SplitPageUC.xaml.vb

@@ -1700,7 +1700,7 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
-         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
+         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING And m_MachiningList(nI).m_nType <> MCH_OY.WATERJETTING Then Continue For
          ' Non si possono invertire i tagli di lama inclinati
          If Math.Abs(m_MachiningList(nI).m_dSideAng) > 0.1 Then Continue For
          ' Se abilitata inversione automatica e quindi non invertito
@@ -1714,6 +1714,7 @@ Public Class SplitPageUC
                ResetEnableInvert(m_MachiningList(nI).m_nEntId)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' se altrimenti disabilitata inversione automatica e invertito
@@ -1725,6 +1726,7 @@ Public Class SplitPageUC
                SwapStartEndData(nI)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' altrimenti disabilitata inversione automatica e non invertito
@@ -2196,6 +2198,7 @@ Public Class SplitPageUC
 
       ' gestione bottone per generazione ponticelli
       If Type = MCH_OY.WATERJETTING Then
+         InvertBtn.Visibility = Visibility.Visible
          ' siccome la stessa posizione è occupata da due comandi sovrapposti
          If CutStartBtn.Visibility = Visibility.Hidden Then
             BridgesWJBtn.Visibility = Visibility.Visible

Constants/ConstIni.vb

@@ -206,6 +206,7 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"

Constants/ConstMachIni.vb

@@ -151,6 +151,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"

DrawImport/DrawPageUC.xaml.vb

@@ -1138,7 +1138,7 @@ Public Class DrawPageUC
       Return True
    End Function
 
-   Private Function MakeSectionFrameInsert() As Boolean
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
       ' m_MainWindow.m_ImportPageUC.LoadFrame()
       ' recupero il primo layer del primo pezzo
       Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
@@ -1150,13 +1150,16 @@ Public Class DrawPageUC
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Inserisco il pezzo
       If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
-      EgtInsertFile(sTmpFile)
-      ' Ne recupero l'Id
-      Dim nPartId As Integer = EgtGetLastPart()
-      ' Creo la cornice
-      m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
-      ' Ricalcolo lavorazioni
-      AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
       ' Cancello il file
       My.Computer.FileSystem.DeleteFile(sTmpFile)
       Return True
@@ -1178,7 +1181,7 @@ Public Class DrawPageUC
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
       If m_MainWindow.FrameCutBtn.IsChecked Then
-         MakeSectionFrameInsert()
+         MakeSectionFrameInsert(InsNbr)
       Else
          MakeMultipleInsert(InsNbr, sPartName)
       End If

DrawImport/ImportPageUC.xaml

@@ -58,7 +58,7 @@
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
-                <Grid Grid.Row="3" Margin="0,0,8,0">
+                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
                     <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="4*"/>
                         <ColumnDefinition Width="1*"/>

DrawImport/ImportPageUC.xaml.vb

@@ -19,6 +19,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -101,6 +104,8 @@ Public Class ImportPageUC
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -196,7 +201,6 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
    End Sub
 
    Private Sub LoadGridData()
@@ -345,7 +349,7 @@ Public Class ImportPageUC
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -415,7 +419,7 @@ Public Class ImportPageUC
             DripCutBtn.IsEnabled = False
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -569,6 +573,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
@@ -585,6 +591,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -592,6 +600,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -1040,6 +1054,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1062,6 +1077,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1092,6 +1108,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1112,6 +1129,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1142,6 +1160,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1160,6 +1179,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1187,6 +1207,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1208,6 +1229,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible

Frames/FrameCutPageUC.xaml

@@ -39,6 +39,15 @@
             <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
+
+            <Button Name="CompoBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="SelSectionBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
             <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
                 <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </ToggleButton>
@@ -63,6 +72,7 @@
                     <RowDefinition Height="0.5*"/>
                     <RowDefinition Height="0.5*"/>
                     <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
                     <RowDefinition Height="0.8*"/>
                     <RowDefinition Height="0.8*"/>
                     <RowDefinition Height="1.7*"/>
@@ -78,14 +88,13 @@
                 </ComboBox>
 
                 <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                    <Button Name="SelSectionBtn" 
+                    <!--<Button Name="SelSectionBtn" 
                     Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                         <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-                    </Button>
+                    </Button>-->
 
                     <Grid>
-                        <Button Name="SelGuideBtn" 
-                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                        <Button Name="SelGuideBtn" Style="{DynamicResource OmagCut_YellowTextButton}"/>
                         <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
                             <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
@@ -110,11 +119,16 @@
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
                 <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
-            Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                 <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+                <TextBlock Name="OffsXInteryTxBl"  Grid.Row="5" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Grid.Row="5" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
                     <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
@@ -125,12 +139,12 @@
                     </Button>
                 </UniformGrid>
 
-                <UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                <!--<UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
                     <Button Name="CompoBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                     </Button>
-                </UniformGrid>
+                </UniformGrid>-->
 
                 <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>

Frames/FrameCutPageUC.xaml.vb

@@ -52,6 +52,8 @@ Public Class FrameCutPageUC
       OffsXyTxBx.Text = LenToString(dOffsXY, 3)
       Dim dOffsYY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSYY, 5, m_MainWindow.GetIniFile())
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
+      Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
+      OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -70,6 +72,7 @@ Public Class FrameCutPageUC
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
+      OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -82,7 +85,11 @@ Public Class FrameCutPageUC
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
       ' Visualizzo il bottone per l'importazione dei compo frame
-      CompoBtn.Visibility = If(GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0, Visibility.Visible, Visibility.Hidden)
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.COMPOFRAME) AndAlso GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0 Then
+         CompoBtn.Visibility = Visibility.Visible
+      Else
+         CompoBtn.Visibility = Visibility.Hidden
+      End If
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -273,7 +280,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -298,9 +305,13 @@ Public Class FrameCutPageUC
          WritePrivateProfileString(S_FRAME, K_OFFSXY, DoubleToString(dOffsXy, 3), m_MainWindow.GetIniFile())
       End If
       Dim dOffsYy As Double = 0
-      If StringToLen(OffsYyTxBx.Text, dOffsYY) Then
+      If StringToLen(OffsYyTxBx.Text, dOffsYy) Then
          WritePrivateProfileString(S_FRAME, K_OFFSYY, DoubleToString(dOffsYy, 3), m_MainWindow.GetIniFile())
       End If
+      Dim dOffsXIntery As Double = 0
+      If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
+         WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
+      End If
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -948,12 +959,18 @@ Public Class FrameCutPageUC
       ' Determino distanza da spessore lama
       Dim dMinDist As Double = 0
       Dim dSawThick As Double = 0
+      Dim dOffsXIntery As Double = 0
+      StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         dMinDist = dSawThick + 5 * EPS_SMALL
+         If dOffsXIntery <= dSawThick Then
+            dMinDist = dSawThick + 5 * EPS_SMALL
+         Else
+            dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
-         dMinDist = 0
+         dMinDist = dOffsXIntery
       End If
       ' Inserisco il pezzo nel grezzo
       Dim ptIns As Point3d

Machine/CurrentMachine.vb

@@ -1,6 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.IO
 
 Public Class CurrentMachine
 
@@ -51,6 +52,8 @@ Public Class CurrentMachine
    Private m_sProdLiProbingState2Var As String = ""
    Private m_sProdLiProbingTcPos2Var As String = ""
    Private m_sProdLiSawDiameter2Var As String = ""
+   Private m_sClickState As String = "E80028"
+   Private m_sClickDir As String = ""
 
    ' Numero e tipo di utensili correntemente disponibili sulla macchina
    Private m_MountedToolConfig As MountedToolConfigs = MountedToolConfigs.SAW
@@ -316,7 +319,7 @@ Public Class CurrentMachine
          Return m_bAskNewOnResend
       End Get
    End Property
-   
+
 
    Friend ReadOnly Property nProdLiSawProbe As Integer
       Get
@@ -324,6 +327,18 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property sClickState As String
+      Get
+         Return m_sClickState
+      End Get
+   End Property
+
+   Friend ReadOnly Property sClickDir As String
+      Get
+         Return m_sClickDir
+      End Get
+   End Property
+
    Friend Function sProdLiProbingStateVar(nI As Integer) As String
       If nI = 1 Then Return m_sProdLiProbingStateVar
       If nI = 2 Then Return m_sProdLiProbingState2Var
@@ -788,7 +803,7 @@ Public Class CurrentMachine
                      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
                   End If
                End If
-                  Case 2
+            Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
@@ -1153,6 +1168,13 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLIPROBINGTCPOS2VAR, "0", m_sProdLiProbingTcPos2Var, sMachIniFile)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLISAWDIAMETER2VAR, "", m_sProdLiSawDiameter2Var, sMachIniFile)
 
+      GetPrivateProfileString(S_POLISHLINE, K_CLICKSTATE, "", m_sClickState, sMachIniFile)
+      GetPrivateProfileString(S_POLISHLINE, k_CLICKDIR, "", m_sClickDir, sMachIniFile)
+      If Not Directory.Exists(m_sClickDir) Then
+         m_sClickState = ""
+         EgtOutLog("Directory " & m_sClickDir & " does not exist")
+      End If
+
       ' Leggo configurazione degli utensili in macchina
       m_MountedToolConfig = GetPrivateProfileInt(S_TOOLS, K_MOUNTEDTOOLCONFIG, 0, sMachIniFile)
       ' Leggo flag presenza tipologie utensili

MainWindow.xaml

@@ -53,7 +53,7 @@
             </ToggleButton>
          </Grid>
 
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
+         <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
    

MainWindow.xaml.vb

@@ -100,6 +100,7 @@ Class MainWindow
       OFFICE_TYPE = 2 ^ 19                '  524288
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
+      COMPOFRAME = 2 ^ 22                 ' 4194304
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -328,8 +329,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2505, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2505, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2506, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2506, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -560,7 +561,7 @@ Class MainWindow
             End If
       End If
       ' --------------------------------- SLAB DB -------------------------------------------------------
-
+      ExitBtn.ToolTip = "Exit" & vbCrLf & "Minimize (Shift)"
    End Sub
 
    Private Sub ManageSingleIstance()

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.5.2")>
-<Assembly: AssemblyFileVersion("2.5.5.2")>
+<Assembly: AssemblyVersion("2.5.6.2")>
+<Assembly: AssemblyFileVersion("2.5.6.2")>

NcComm/CNCommunication.vb

@@ -133,6 +133,10 @@ Public Class CNCommunication
             Refresh()
          End If
 
+         If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sClickState) Then
+            ClickOnPolishLine()
+         End If
+
          m_bTimerBusy = False
          m_RefreshTimer.Start()
       Else
@@ -499,6 +503,31 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub ClickOnPolishLine()
+      ' Se richiesto di scattare foto sulla linea di lucidatura
+      m_CN.n_DReadELS_handle = 0
+      m_CN.ReadEls_Add_Parameter(m_MainWindow.m_CurrentMachine.sClickState, 1)
+      Dim nClickState As Integer = 0
+      For I As Integer = 0 To 10
+         System.Threading.Thread.Sleep(50)
+         If m_CN.n_DReadELS_handle = 1 Then
+            nClickState = CInt(m_CN.d_DReadELS_value)
+            If nClickState = 1 Then
+               ' procedo a costruire un nuovo file nella cartella indicata in configurazione
+               Try
+                  File.Create(m_MainWindow.m_CurrentMachine.sClickDir & "\NewClick.txt")
+                  ' Dichiaro di aver provveduto a comunicare di scattare la foto
+                  m_CN.DVariables_WriteVariables2(m_MainWindow.m_CurrentMachine.sClickState, "0")
+               Catch ex As Exception
+                  EgtOutLog("Error on PolishLine comunication: " & ex.ToString)
+               End Try
+            End If
+            Exit For
+         End If
+      Next
+
+   End Sub
+
    Private Sub Refresh()
 
       If m_bNewPosData Then

Project/ProjectMgrUC.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.ComponentModel
 Imports System.Drawing
 Imports System.IO
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -32,6 +33,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
+      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Reset Feed (Shift)"
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -250,6 +252,11 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
+      If (Keyboard.Modifiers And ModifierKeys.Shift) Then
+         ' eseguo il ricalcolo delle sole FEED di lavorazione
+         UpdateFeedAllMachining()
+         Return
+      End If
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -711,6 +718,112 @@ Public Class ProjectMgrUC
       End While
    End Sub
 
+   Public Sub UpdateFeedAllMachining()
+      ' recupero il valore di Feed della lavorazione corrente
+      Dim sMachiningName As String = String.Empty
+      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
+         ' errore: lavorazione non trovata
+         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
+         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
+         Return
+      End If
+      Dim dFeed As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+      Dim dFeedStarted As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+      Dim dFeedEnded As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+      Dim dFeedTipped As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+      Dim dFeedBack As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+      Dim dFeedSideAng As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      Dim MachiningList As New List(Of SplitMach)
+
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = 1
+      ' recupero in numero di fasi presenti nel progetto
+      Dim nCountPhase As Integer = EgtGetPhaseCount()
+      ' ciclo su tutte le fasi di lavorazione
+      Dim nMach As Integer = 0
+      Dim nMachUpdated As Integer = 0
+      For IndexPhase As Integer = 1 To nCountPhase
+         ' imposto la fase corrente
+         nCurrPhase = IndexPhase
+         ' Preparo la lista delle lavorazioni
+         CalculateSplitMachList(nCurrPhase, MachiningList)
+         ' per ogni lavorazione corrente procedo ad aggiornare la feed
+         For IndexMachining As Integer = 0 To MachiningList.Count - 1
+            nMach += 1
+            Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
+            ' setto la lavorazione come corrente
+            If EgtSetCurrMachining(nOperId) Then
+               Dim bUpdate As Boolean = False
+               ' STANDARD
+               Dim dOrigFeed As Double
+               EgtGetMachiningParam(MCH_MP.FEED, dOrigFeed)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeed - dFeed) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.FEED, dFeed)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' STARTED
+               Dim dOrigFeedStarted As Double
+               EgtGetMachiningParam(MCH_MP.STARTFEED, dOrigFeedStarted)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedStarted - dFeedStarted) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' ENDED
+               Dim dOrigFeedEnded As Double
+               EgtGetMachiningParam(MCH_MP.ENDFEED, dOrigFeedEnded)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedEnded - dFeedEnded) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' TIPPED
+               Dim dOrigFeedTipped As Double
+               EgtGetMachiningParam(MCH_MP.TIPFEED, dOrigFeedTipped)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedTipped - dFeedTipped) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' BACK
+               Dim dOrigFeedBack As Double
+               EgtGetMachiningParam(MCH_MP.BACKFEED, dOrigFeedBack)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedBack) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' SIDEANG
+               Dim dOrigFeedSideAng As Double
+               EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dOrigFeedSideAng)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedSideAng) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' conto il numero di lavorazioni aggiornate
+               If bUpdate Then
+                  nMachUpdated += 1
+               End If
+            End If
+         Next
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 

RawPhoto/Camera.vb

@@ -315,6 +315,16 @@ Public Class Camera
       GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
       Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
 
+      ' eventualmente rimuovo inizio stringa: "PLC, ___"
+      Dim sItemString1() As String = Split(sPLCVarSpotLight1, ","c)
+      If sItemString1.Count > 1 Then
+         sPLCVarSpotLight1 = sItemString1(1).Trim
+      End If
+      Dim sItemString2() As String = Split(sPLCVarSpotLight2, ","c)
+      If sItemString2.Count > 1 Then
+         sPLCVarSpotLight2 = sItemString2(1).Trim
+      End If
+
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
          Case 1, 2
             If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then

Simulation/SimulationPageUC.xaml.vb

@@ -567,16 +567,56 @@ Public Class SimulationPageUC
    End Sub
 
    Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
-      ' eventualmente fermo la simulazione
-      m_nStatus = MCH_SIM_ST.UI_STOP
-      m_bPlay = False
-      PlayPauseBtn_Click(Nothing, Nothing)
-
       ' se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
       Dim IsPressedShiftKey As Boolean = False
       If Keyboard.Modifiers And ModifierKeys.Shift Then
          IsPressedShiftKey = True
       End If
+
+      ' eventualmente fermo la simulazione
+      m_nStatus = MCH_SIM_ST.UI_STOP
+      m_bPlay = False
+      PlayPauseBtn_Click(Nothing, Nothing)
+
+      ' Se nella pagina di tagli diretti
+      If m_MainWindow.DirectCutBtn.IsChecked And Not m_MainWindow.CadCutBtn.IsChecked Then
+         ' Genero file CNC (lancio anche se errore in precedenza)
+         Dim sCncPathDirect As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+         Dim bOkDirect As Boolean = EgtGenerate(sCncPathDirect, "OmagCut ver." & m_MainWindow.GetVersion())
+
+         ' Costringo ad aggiornare UI
+         UpdateUI()
+         ' Ripristino come fase corrente quella iniziale
+         EgtSetCurrPhase(1)
+         If bOkDirect Then
+            m_CurrProjPage.SetInfoMessage("Genarato file " & "DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+         Else
+            m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         End If
+         ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+         If bOkDirect And IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sCncPathDirect)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
+         ' ricarico la pagina di simulazione
+         EgtSetCurrPhase(1)
+         ' nascondo i pezzi in parcheggio
+         HideParkedParts(True)
+         ' Avvio ambiente di simulazione
+         EgtSimInit()
+         EgtSimStart()
+         ' Imposto stato corrente
+         SetStatus(MCH_SIM_ST.UI_STOP)
+         m_bPlay = True
+         ' Costringo ad aggiornare UI
+         UpdateUI()
+         ' esco 
+         Return
+      End If
+
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Elimino eventuale attrezzaggio da OmagOFFICE