Correzione apertura programma da progetto

CAM/CamAuto.vb

@@ -1,5 +1,4 @@
-Imports System.Windows.Forms.Integration
-Imports EgtUILib
+Imports EgtUILib
 
 Friend Module CamAuto
 
@@ -30,7 +29,7 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -164,22 +163,6 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function ResetAllRawPart() As Boolean
-      Dim nPhase As Integer = 1
-      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
-      While nOtherRaw <> GDB_ID.NULL
-         ' se il pezzo non appartiene alla prima fase allora viene eliminato
-         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
-            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
-            EgtRemoveRawPart(nOtherRaw)
-            nOtherRaw = NextRaw
-         Else
-            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
-         End If
-      End While
-      Return True
-   End Function
-
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

CadCuts/MoveRawPartPage.xaml

@@ -7,167 +7,164 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-    <!-- Definizione della SplitPage -->
-    <Grid Name="SplitPageGrid" >
-        <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-        </Grid.ColumnDefinitions>
-        <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-        </Grid.RowDefinitions>
+   <!-- Definizione della SplitPage -->
+   <Grid Name="SplitPageGrid" >
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="3*"/>
+         <ColumnDefinition Width="12*"/>
+      </Grid.ColumnDefinitions>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="8*"/>
+         <RowDefinition Height="1*"/>
+      </Grid.RowDefinitions>
 
-        <!--Upper button grid-->
-        <Grid Grid.Column="1">
+      <!--Upper button grid-->
+      <Grid Grid.Column="1">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="8*"/>
+         </Grid.ColumnDefinitions>
+
+         <!--Griglia per oscurare i bottoni della pagina sottostante-->
+         <Grid Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="4*"/>
-                <ColumnDefinition Width="8*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <!--Griglia per oscurare i bottoni della pagina sottostante-->
-            <Grid Background="{DynamicResource OmagCut_Gray}">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                </Grid.ColumnDefinitions>
-
-                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                        <Image.RenderTransform>
-                            <TransformGroup>
-                                <RotateTransform Angle="180"/>
-                            </TransformGroup>
-                        </Image.RenderTransform>
-                    </Image>
-                </Button>
-                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            </Grid>
-        </Grid>
-
-        <!--Left Button Grid-->
-        <Grid Grid.RowSpan="3">
-            <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="2*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
-
-            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
-            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                  <Image.RenderTransform>
+                     <TransformGroup>
+                        <RotateTransform Angle="180"/>
+                     </TransformGroup>
+                  </Image.RenderTransform>
+               </Image>
             </Button>
-            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
+            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+         </Grid>
+      </Grid>
+
+      <!--Left Button Grid-->
+      <Grid Grid.RowSpan="3">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-            </Button>
-            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+         </Button>
+         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
+            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
 
-            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-            </Button>
+         </Button>
 
-            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="Auto"/>
-                    <ColumnDefinition Width="Auto"/>
-                </Grid.ColumnDefinitions>
-                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
+         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
+            </Grid.ColumnDefinitions>
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-            </Grid>
+         </Grid>
 
-            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-            </Button>
+         </Button>
 
-            <!--Gestione sfridi-->
-            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+
+         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-            <!--Gestione scarico pezzi-->
-            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
-                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
             <Grid Grid.Row="7" Grid.ColumnSpan="3">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-
-            </Grid>
-
-        </Grid>
-
-        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
             </Grid.ColumnDefinitions>
+
+         </Grid>
+
+      </Grid>
+
+      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="10*"/>
+         </Grid.ColumnDefinitions>
             <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
             <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
         </Grid>
 
-    </Grid>
+   </Grid>
 
 </UserControl>

CadCuts/MoveRawPartPage.xaml.vb

@@ -1,5 +1,4 @@
-Imports System.Windows.Forms.Integration
-Imports EgtUILib
+Imports EgtUILib
 
 Public Class MoveRawPartPage
    ' Riferimento alla MainWindow
@@ -36,16 +35,12 @@ Public Class MoveRawPartPage
    Private m_ScrapsVisibility As Visibility = Visibility.Visible
    Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
-   ' definisce se è stata inserito uno scarico 
-   Private m_IsCurrPhaseUnloaded As Boolean = False
-
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
       ScrapsBtn.Content = "Add Scraps"
-      UnloadPartsBtn.Content = "Move part"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -65,12 +60,7 @@ Public Class MoveRawPartPage
       End If
       ' Deseleziono tutto
       EgtDeselectAll()
-      ' resetto variabili di navigazione nelle fasi
-      m_bPrev = False
-      m_bToNext = False
-
-      '---------------------------- CREATE NEW PHASE ----------------------------
-      ' Recupero i tagli ABILITATI prima definiti
+      ' Recupero i tagli allungati prima definiti
       Dim Cuts(0) As Integer
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
@@ -79,19 +69,11 @@ Public Class MoveRawPartPage
       Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
-         m_IsCurrPhaseUnloaded = False
       Else
-         nPrevPhase = nPrevPhase + 1
-         EgtSetCurrPhase(nPrevPhase)
+         EgtSetCurrPhase(nPrevPhase + 1)
          HideAllMachinings()
-         ' verifico se la fase corrente è di tipo scarico frontale
-         m_nCurrDisposition = EgtGetPhaseDisposition(nPrevPhase)
-         If IsDispUnloadOnAuxTab(m_nCurrDisposition) Then
-            m_SplitPage.m_bOnAuxTab = True
-         End If
       End If
       m_nCurrPhase = EgtGetCurrPhase()
-      '---------------------------- CREATE NEW PHASE ----------------------------
 
       '---------------------------- SCRAPS ----------------------------
       ' gestione visualizzazione del comando "Scraps"
@@ -119,19 +101,14 @@ Public Class MoveRawPartPage
       End If
       '---------------------------- SCRAPS ----------------------------
 
-      '---------------------------- AUX TABLE ---------------------------- 
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
-      If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
-         ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
+      If m_SplitPage.m_bOnAuxTab Then
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
          SetAuxTabInCurrDisposition()
-         UnloadPartsBtn.Content = "Go to MOVE part"
          ' altrimenti, aggiorno visualizzazione
-      ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
+      Else
          EgtDraw()
-         UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
-      '---------------------------- AUX TABLE ---------------------------- 
-
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
@@ -190,30 +167,6 @@ Public Class MoveRawPartPage
 
       ' aggiorno il messaggio del comando per gestire gli sfridi
       VerifyIsNewScrap(m_CurrRawOnVacuum)
-      ' aggiorno la visibilità dei comandi
-      RefreshVisibility()
-      ' salvo l'idice della fase corrente
-      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
-      ' Abilitazione bottone modifica
-      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
-      ' gestione abilitazione altri bottoni
-      EnableButtons()
-   End Sub
-
-   ' Gestione di visualizzazione dei comandi per il movimento dei pezzi
-   Private Sub RefreshVisibility()
-      ' Aggiorno visulizzazione comando per passare alla pagina di scarico
-      If Not m_SplitPage.m_bEnableOnAuxTab Then
-         UnloadPartsBtn.Visibility = Visibility.Hidden
-      Else
-         UnloadPartsBtn.Visibility = Visibility.Visible
-         If m_SplitPage.m_bOnAuxTab Then
-            UnloadPartsBtn.Content = "Go to MOVE part"
-            ' altrimenti, aggiorno visualizzazione
-         Else
-            UnloadPartsBtn.Content = "Go to UNLOAD part"
-         End If
-      End If
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -269,6 +222,12 @@ Public Class MoveRawPartPage
          ResetBtn.Visibility = Windows.Visibility.Visible
          ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' Abilitazione bottone modifica
+      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
+      ' gestione abilitazione altri bottoni
+      EnableButtons()
    End Sub
 
    Private Sub SetAuxTabInCurrDisposition()
@@ -333,12 +292,12 @@ Public Class MoveRawPartPage
                EgtSetStatus(nId, GDB_ST.ON_)
                ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
                If VerifyCollisionWithOtherRawPart(nId) Then
-                  ' mantengo la selezione del pezzo
-                  EgtSetStatus(nId, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
-               Else
-                  ' Se con ventose, le nascondo
-                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+                     ' mantengo la selezione del pezzo
+                     EgtSetStatus(nId, GDB_ST.SEL)
+                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  Else
+                     ' Se con ventose, le nascondo
+                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
 
@@ -486,7 +445,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist += Math.Abs(dMove)
             End If
-            ' Altrimenti movimento Y +
+         ' Altrimenti movimento Y +
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
@@ -529,7 +488,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist -= Math.Abs(dMove)
             End If
-            ' Altrimenti movimento Y -
+         ' Altrimenti movimento Y -
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
@@ -821,33 +780,6 @@ Public Class MoveRawPartPage
       End While
    End Sub
 
-   ' Passo dalla pagina di movimento dei pezzi alla pagina di scarico
-   Private Sub UnloadPartBtn_Click() Handles UnloadPartsBtn.Click
-      ' forzo lo stato di scarico frontale oppure di movimento
-      m_SplitPage.m_bOnAuxTab = Not m_SplitPage.m_bOnAuxTab
-
-      ' se rientro nella fase di spostamenti allora nascondo la tavola di scarico
-      If Not m_SplitPage.m_bOnAuxTab Then
-         ' se ci sono pezzi sulla tavola di scarico non posso nasconderla
-         Dim LclLstOfUnldPart As New List(Of Integer)
-         If Not PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
-            EgtDisableModified()
-            ' nascondo la tavola di scarico
-            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
-            ' Nascondo eventuali pezzi in parcheggio
-            HideParkedParts()
-            EgtEnableModified()
-         End If
-      Else
-         ' Assegnazione delle info tavola ausiliaria alla dispozione corrente
-         SetAuxTabInCurrDisposition()
-      End If
-
-      ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
-      RefreshVisibility()
-      EgtZoom(ZM.ALL, True)
-   End Sub
-
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -889,16 +821,16 @@ Public Class MoveRawPartPage
       Dim ptRef As Point3d
       If Not EgtGetInfo(nRefId, "Pos", ptRef) Then Return
       Dim sCorn As String = ""
-      EgtGetInfo(nRefId, "COR", sCorn)
-      Select Case sCorn
-         Case "TL"
-            nCorn = MCH_CR.TL
-         Case "TR"
-            nCorn = MCH_CR.TR
-         Case "BL"
-            nCorn = MCH_CR.BL
-         Case "BR"
-            nCorn = MCH_CR.BR
+      EgtGetInfo( nRefId, "COR", sCorn)
+      Select sCorn
+      Case "TL"
+         nCorn = MCH_CR.TL
+      Case "TR"
+         nCorn = MCH_CR.TR
+      Case "BL"
+         nCorn = MCH_CR.BL
+      Case "BR"
+         nCorn = MCH_CR.BR
       End Select
       ' Recupero il centro del grezzo
       Dim ptRawCen As Point3d
@@ -1075,44 +1007,8 @@ Public Class MoveRawPartPage
    End Function
 
    Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
-      ' verifico la presenza di eventuali pezzi sulla tavola di scarico
-      Dim LclLstOfUnldPart As New List(Of Integer)
-      PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase)
-      If Not InsertPauseInCurrPhase() Then Return
-      AddNewPhase()
-   End Sub
-
-   ' restituisce la lista dei pezzi che sono sulla tavola di scarico nella fase indicata
-   Private Function PartOnAuxTab(ByRef ListOfUnloadedPatr As List(Of Integer), nPhase As Integer) As Boolean
-      m_IsCurrPhaseUnloaded = False
-      ' Area tavolo ausiliario
-      Dim b3AuxTab As New BBox3d
-      EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
-      ' Area pezzi 
-      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
-      While nOtherRaw <> GDB_ID.NULL
-         If EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
-            Dim b3OtherRaw As New BBox3d
-            ' EgtGetRawPartBBox(nOtherRaw, b3OtherRaw)
-            EgtGetBBoxGlob(nOtherRaw, GDB_BB.STANDARD, b3OtherRaw)
-            ' se il centro del pezzo è sulla tavola di scarico
-            If b3OtherRaw.Center.y < b3AuxTab.Max().y Then
-               m_IsCurrPhaseUnloaded = True
-               ListOfUnloadedPatr.Add(nOtherRaw)
-               ' salvo l'info che indica che il pezzo deve essere scaricato
-               EgtSetInfo(nOtherRaw, "Unloaded", 1)
-               'Exit While
-            End If
-         End If
-         nOtherRaw = EgtGetNextRawPart(nOtherRaw)
-      End While
-      Return m_IsCurrPhaseUnloaded
-   End Function
-
-   ' inserisce una pausa nella fase corrente
-   Private Function InsertPauseInCurrPhase() As Boolean
       ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
-      If m_RawMoveDataList.Count = 0 Then Return False
+      If m_RawMoveDataList.Count = 0 Then Return
       ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
       Dim Index As Integer = 0
       For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
@@ -1121,9 +1017,8 @@ Public Class MoveRawPartPage
          End If
       Next
       ' verifico che la lista non sia vuota
-      If m_RawMoveDataList.Count = 0 Then
-         Return False
-      End If
+      If m_RawMoveDataList.Count = 0 Then Return
+
       ' recupero disposizione fase corrente
       Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
       ' imposto la pausa nella disposizione corrente
@@ -1131,22 +1026,30 @@ Public Class MoveRawPartPage
       ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
       SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
       ' imposto eventuale movimento pezzi su tavola ausiliaria
-      SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
-      ' SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
       '' Eseguo calcolo speciale dei movimenti: per tavola multicut
       'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
-      SaveRemoveByHandInDisposition(nDispId, False)
-      Return True
-   End Function
 
-   ' crea una nuvoa fase/disposizione, la rende corrente, ricalcolo i grezzi e le lavorazioni della nuova fase
-   Private Function AddNewPhase() As Boolean
       ' Creo nuova fase
       Dim nNewPhase As Integer = EgtAddPhase()
-      ' Carico i grezzi rimasti sulla tavola nella nuova fase
-      ChangePhaseRawPart(nNewPhase)
-      ' Sposto le lavorazioni rimaste nella nuova fase
-      ChangeOperationPhase(nNewPhase)
+
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
 
       Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
       'SetPause(nCurrDisposition)
@@ -1157,43 +1060,8 @@ Public Class MoveRawPartPage
       SetAuxTabInCurrDisposition()
       ' ripulisco la lista degli spostamenti
       m_RawMoveDataList.Clear()
-      m_IsCurrPhaseUnloaded = False
       ' aggiorno la fase corrente
       m_nCurrPhase = EgtGetCurrPhase()
-      Return True
-   End Function
-
-   ' Copio i grezzi rimasti sulla tavola nella fase successiva
-   Private Sub ChangePhaseRawPart(ByVal nNewPhase As Integer)
-      ' recupero l'elenco dei pezzi che sono stati scaricati sulla tavola
-      Dim LocalLstOfUnldPart As New List(Of Integer)
-      PartOnAuxTab(LocalLstOfUnldPart, nNewPhase - 1)
-      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
-      Dim nRawId As Integer = EgtGetFirstRawPart()
-      While nRawId <> GDB_ID.NULL
-         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
-         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
-            Dim bKeepRawPart As Boolean = True
-            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
-               If nRawId = RawOnAuxTabData.m_nId Then
-                  ' se il pezzo è stato scaricato allora non deve essere riportato nella fase successiva
-                  For Each UnloadPart As Integer In LocalLstOfUnldPart
-                     If nRawId = UnloadPart Then
-                        ' salvo l'info che indica che il pezzo deve essere scaricato
-                        EgtSetInfo(nRawId, "Unloaded", 1)
-                        bKeepRawPart = False
-                        Exit For
-                     End If
-                  Next
-                  'bKeepRawPart = False
-                  Exit For
-               End If
-            Next
-            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
-         End If
-         ' passo al successivo grezzo
-         nRawId = EgtGetNextRawPart(nRawId)
-      End While
    End Sub
 
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
@@ -1209,8 +1077,6 @@ Public Class MoveRawPartPage
       EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
       AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
       RemoveRawMoveData(nRawId, m_RawMoveDataList)
-      ' elimino l'info che indica che il pezzo è scaricato sulla tavola
-      EgtRemoveInfo(nRawId, "Unloaded")
       ' Disabilito pezzo e nascondo le ventose
       EgtSetStatus(nRawId, GDB_ST.ON_)
       EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -1243,14 +1109,6 @@ Public Class MoveRawPartPage
          m_nCurrPhase -= 1
          m_bPrev = False
          m_SplitPage.m_bShow = True
-         m_SplitPage.m_bOnAuxTab = True
-         ' imposto la visibilità della tavola ausiliaria
-         SetAuxTabInCurrDisposition()
-         ' carico le info di disposizione dei pezzi
-         m_RawMoveDataList.Clear()
-         m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
-         GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
-         RefreshVisibility()
          EgtDraw()
          Return
       End If
@@ -1281,52 +1139,18 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' ------- VISUALIZZAZIONE -------
-      If m_SplitPage.m_bShow Then
-         ' verifico se la fase successiva è uno scarico frontale
-         If NextOperationIsUnloading(m_nCurrDisposition) Then
-            ' imposto la nuova fase (che è stata modificata all'interno della funzione di controllo)
-            EgtSetCurrPhase(m_nCurrPhase)
-            ' carico i dati di movimento dei pezzi nella fase corrente
-            m_RawMoveDataList.Clear()
-            m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
-            GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
-            EgtDraw()
-            Return
-         ElseIf IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 AndAlso Not NextOperationIsUnloading(m_nCurrDisposition) Then
-            ' imposto la nuova fase, al termine della Sub verrà caricata la pagina Split nella fase indicata ora
-            m_bToNext = True
-            m_nCurrPhase += 1
-            EgtSetCurrPhase(m_nCurrPhase)
-            EgtDraw()
-         End If
+      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+      If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase + 1)
+         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         m_nCurrPhase += 1
+         m_bToNext = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         EnableButtons()
+         Return
       End If
 
-      ' -------     MODIFICA    -------
-      If Not m_SplitPage.m_bShow Then
-         ' se la tavola di scarico presente oppure ci sono pezzi sulla tavola di scarico
-         Dim LclLstOfUnldPart As New List(Of Integer)
-         If m_SplitPage.m_bOnAuxTab Or PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
-            ' se ci sono pezzi sulla tavola di scarico prima di procedere inserisco una pausa e creo una nuoava fase
-            If m_IsCurrPhaseUnloaded AndAlso InsertPauseInCurrPhase() Then AddNewPhase()
-            ' nascondo la tavola di scarico
-            EgtDisableModified()
-            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
-            EgtEnableModified()
-         End If
-         m_bToNext = True
-         '' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
-         'If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
-         '   EgtSetCurrPhase(m_nCurrPhase + 1)
-         '   m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
-         '   m_nCurrPhase += 1
-         '   m_bToNext = False
-         '   m_SplitPage.m_bShow = True
-         '   EgtDraw()
-         '   EnableButtons()
-         '   Return
-         'End If
-      End If
       ' resetto l'inidice del pezzo da mnovimentare
       m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
@@ -1369,7 +1193,7 @@ Public Class MoveRawPartPage
       ' disabilito bottone
       ModifyBtn.IsEnabled = False
       ' gestione abilitazione altri bottoni
-      EnableButtons(MachiningList.Count > 0)
+      EnableButtons()
    End Sub
 
    ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
@@ -1380,20 +1204,6 @@ Public Class MoveRawPartPage
       Return bVal
    End Function
 
-   ' restituisce e attiva la successiva disposizione se è uno scarico frontale
-   Public Function NextOperationIsUnloading(nCurrDispId As Integer) As Boolean
-      ' recupero la primo operazione successiva
-      Dim nNextIdOperation As Integer = EgtGetNextOperation(nCurrDispId)
-      ' a partire da questa cerco la prima disposizione disponibile
-      Dim nNextIdDips As Integer = GetNextDisposition(nNextIdOperation)
-      If nNextIdDips = nNextIdOperation And IsDispUnloadOnAuxTab(nNextIdOperation) Then
-         m_nCurrPhase += 1
-         m_nCurrDisposition = nNextIdOperation
-         Return True
-      End If
-      Return False
-   End Function
-
    ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
    Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
       Dim nDispId As Integer = nCurrDisposId
@@ -1406,7 +1216,7 @@ Public Class MoveRawPartPage
       Return GDB_ID.NULL
    End Function
 
-   Private Sub EnableButtons(Optional bExistsMachining As Boolean = False)
+   Private Sub EnableButtons()
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
       RightBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -1422,35 +1232,19 @@ Public Class MoveRawPartPage
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
       PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
-      UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
       If m_SplitPage.m_bShow Then
          NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
       Else
-         ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
-         If Not bExistsMachining Then
-            NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
-         Else
-            NextBtn.IsEnabled = True
-         End If
-
+         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
       End If
    End Sub
 
-   ' esco dalla pagina di scarico
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
       ' verifico che la fase corrente non sia vuota
       Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
-
-      '' se sono in visualizzazione allora non elimino essuna operazione
-      'If Not m_SplitPage.m_bShow Then
-      '   If EgtIsOperationEmpty(nLastDispId) And Not m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
-      '      EgtErase(nLastDispId)
-      '   ElseIf EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
-      '      ' Dichiaro pagina non attiva
-      '      m_bActive = False
-      '      Return
-      '   End If
-      'End If
+      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+         EgtErase(nLastDispId)
+      End If
 
       ' Se movimento con ventose
       If Not m_bByHand Then
@@ -1466,9 +1260,8 @@ Public Class MoveRawPartPage
             SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
-            ' imposto eventuale movimento pezzi su tavola ausiliaria (se è realmente avvenuto)
-            'SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)            
-            SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
+            ' imposto eventuale movimento pezzi su tavola ausiliaria
+            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
@@ -1484,18 +1277,13 @@ Public Class MoveRawPartPage
             SpecialApplyDisposition(nDispId, True)
          End If
       End If
-
       ' Nascondo eventuale tavola ausiliaria
       If m_SplitPage.m_bOnAuxTab Then
          EgtDisableModified()
          EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
          EgtEnableModified()
-         ' se sto uscendo dalla pagina delle spezzature
-         If Not m_bPrev And Not m_bToNext Then
-            Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
-            ' se sto uscendo dalla pagina split (senza passare dal comando next) 
-            Dim lclLstUnlPart As New List(Of Integer)
-            SaveMovePartsOnAuxTable(nDispId, PartOnAuxTab(lclLstUnlPart, m_nCurrPhase))
+         EgtZoom(ZM.ALL, False)
+         If Not m_bPrev Then
             ' Cancello eventuale manipolatore pezzi
             EgtDisableModified()
             RemoveVacuumCups()
@@ -1512,30 +1300,10 @@ Public Class MoveRawPartPage
          m_bPrev = False
          m_SplitPage.m_bShow = True
       End If
-
-      Dim Ph As Integer = EgtGetCurrPhase()
-      ' aggiorno il disegno
-      EgtZoom(ZM.ALL, False)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
-   ' ----------------- TEST funzione per debug operazioni  -----------------
-   Private Sub SaveMyFileTest(sFilename As String)
-      LoadCurrPhaseMachining()
-      ' salvo il file corrente per poterlo studiare e capire cosa è successo nella rappresentazione dei grezzi
-      EgtSaveFile("C:\EgtData\OmagCUT\MyProjects\" & sFilename & ".nge", NGE.BIN)
-   End Sub
-
-   Private Sub LoadCurrPhaseMachining()
-      Dim m_MachiningList As New List(Of SplitMach)
-      'm_SplitPage.ShowMachiningList()
-      'm_SplitPage.SaveOrderMachinig(m_nCurrPhase)
-      ' Preparo la lista delle lavorazioni
-      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
-      Dim b As Boolean = False
-   End Sub
-
 End Class
 
 

CadCuts/SplitAuto.vb

@@ -1,5 +1,4 @@
-Imports System.Windows.Forms.Integration
-Imports EgtUILib
+Imports EgtUILib
 
 Public Module SplitAuto
 
@@ -133,7 +132,7 @@ Public Module SplitAuto
                      Mach.m_bStartAll = False
                      Mach.m_bEndAll = False
                   End If
-                  ' Waterjet
+               ' Waterjet
                ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
                   Mach.m_nInterf = FMI_TYPE.NONE
                   ' recupero l'angolo di fianco
@@ -142,7 +141,7 @@ Public Module SplitAuto
                   Mach.m_bCanEndAll = False
                   Mach.m_bStartAll = False
                   Mach.m_bEndAll = False
-                  ' Forature e fresature
+               ' Forature e fresature
                Else
                   Mach.m_nInterf = FMI_TYPE.NONE
                   Mach.m_dSideAng = 0
@@ -157,7 +156,7 @@ Public Module SplitAuto
                Mach.m_bPause = GetPause(nOperId)
                ' inserisco in lista
                MachSplitList.Add(Mach)
-               ' altrimenti la disattivo
+            ' altrimenti la disattivo
             Else
                EgtSetOperationMode(nOperId, False)
             End If
@@ -195,7 +194,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -220,11 +219,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -343,7 +342,6 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
-      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -395,19 +393,10 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
-      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
-      ' ---------------------------------- LAVORAZIONI ----------------------------------
-      ChangeOperationPhase(nNewPhase)
-      ' ---------------------------------- LAVORAZIONI ----------------------------------
-      Return True
-   End Function
-
-   ' Sposta le lavorzioni della fase precedente a quella indicata
-   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -428,50 +417,9 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-   End Sub
+      Return True
+   End Function
 
-   ' Miglioramento della gestione delle lavorazioni
-   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
-      ' creo l'elenco delle lavorazioni che devono essere sposate
-      Dim MchList As New List(Of Integer)
-      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
-      Dim nId = EgtGetFirstOperation()
-      While nId <> GDB_ID.NULL
-         Dim nNextId = EgtGetNextOperation(nId)
-         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
-            ' Provo ad inserire la lavorazione nell'elenco
-            AddMach(MchList, nId)
-            ' sposto le inglobate
-            Dim sInfo As String = String.Empty
-            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
-               Dim sItems() As String = sInfo.Split(",".ToCharArray)
-               For Each sId2 As String In sItems
-                  Dim nId2 As Integer = 0
-                  StringToInt(sId2, nId2)
-                  If nId2 > 0 Then
-                     ' Provo ad inserire la lavorazione nell'elenco
-                     AddMach(MchList, nId2)
-                  End If
-               Next
-            End If
-         End If
-         nId = nNextId
-      End While
-      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
-      For Each ItemMchId As Integer In MchList
-         EgtChangeOperationPhase(ItemMchId, nNewPhase)
-      Next
-   End Sub
-
-   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
-   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
-      For Each Item As Integer In MchList
-         If IdMch = Item Then
-            Return
-         End If
-      Next
-      MchList.Add(IdMch)
-   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale

CadCuts/SplitPageUC.xaml.vb

@@ -13,7 +13,7 @@ Public Class SplitPageUC
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
    Private m_bByHand As Boolean = True
    ' Abilitazione movimento finale pezzi su tavola ausiliaria
-   Friend m_bEnableOnAuxTab As Boolean = False
+   Private m_bEnableOnAuxTab As Boolean = False
    ' Stato
    Private m_nCurrPhase As Integer = 0
    Private m_MachiningList As New List(Of SplitMach)
@@ -49,7 +49,6 @@ Public Class SplitPageUC
    Private m_bModified As Boolean = False
    Private m_nNbrGrpId As Integer = GDB_ID.NULL
    Private m_bToNext As Boolean = False
-   Private m_bToPrev As Boolean = False
    Friend m_bOnAuxTab As Boolean = False
    ' Drag
    Private m_nDragInd As Integer = -1
@@ -168,7 +167,6 @@ Public Class SplitPageUC
       m_bModified = False
       ' Reset flag tipo uscita
       m_bToNext = False
-      m_bToPrev = False
       ' Abilitazione bottoni
       EnableButtons()
       ' Se sola visualizzazione, segnalazione di eventuale fase di restart
@@ -182,8 +180,7 @@ Public Class SplitPageUC
       End If
    End Sub
 
-   ' preparo la lista delle lavorazioni da mostrare in interfaccia
-   Public Sub ShowMachiningList()
+   Private Sub ShowMachiningList()
       m_ItemList.Clear()
       For i As Integer = 1 To m_MachiningList.Count()
          Dim Mach As SplitMach = m_MachiningList(i - 1)
@@ -713,8 +710,30 @@ Public Class SplitPageUC
          MoveUpBtn.IsEnabled = False
          MoveDownBtn.IsEnabled = False
       End If
-      ' Recupero la selezione dei tagli correnti
+
       GetCurrSelection()
+
+      '' verifico che siano contigui
+      'Dim bContigus As Boolean = False
+      'Dim OrdIndex = 0
+      'OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
+      '' recupero l'indice dell'ultimo elemento selezionato
+      'Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
+      'If MachiningLsBx.SelectedItems.Count = 1 Then
+      '   bContigus = True
+      'Else
+      '   For Each Item As NameIdLsBxItem In ItemList
+      '      If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
+      '         bContigus = True
+      '      End If
+      '   Next
+      'End If
+      '' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
+      'If Not bContigus Then
+      '   ItemList.Remove(LastSel)
+      '   MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+      'End If
+
       ' resetto marcatura lavorazioni
       If m_CurrFirstInd > -1 Then
          For Index As Integer = m_CurrFirstInd To m_CurrLastInd
@@ -808,8 +827,6 @@ Public Class SplitPageUC
       Next
 
       VerifyHomogenousMachining(ItemList)
-      ' Abilitazione bottone Next
-      EnableButtons()
    End Sub
 
    Private Sub AllOnBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllOnBtn.Click
@@ -1763,26 +1780,15 @@ Public Class SplitPageUC
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
       ' Dichiaro solo visualizzazione
       m_bShow = True
-      '' Esco 
-      'ExitSplit(False)
+      ' Esco 
+      ExitSplit(False)
       ' Torno alla fase precedente
-      Dim nCurrPhase As Integer = EgtGetCurrPhase()
-      ' se questa è la prima fase, non possono tornare più indietro di così
-      If nCurrPhase = 1 Then
-         Return
-      End If
-      EgtSetCurrPhase(nCurrPhase - 1)
-      m_bToPrev = True
+      EgtSetCurrPhase(EgtGetCurrPhase() - 1)
       ' Reimposto la precedente
-      'SplitPageUC_Loaded(Nothing, Nothing)
-      ' torno alla disposizione della fase corrente
-      m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(m_MainWindow.m_CadCutPageUC.m_SplitPage)
-      m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage)
-      m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.MoveRawPart
+      SplitPageUC_Loaded(Nothing, Nothing)
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      ' ------- VISUALIZZAZIONE -------
       If m_bShow Then
          Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
          ' recupero l'operazione successiva
@@ -1904,7 +1910,7 @@ Public Class SplitPageUC
    Private Sub SplitPageUC_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
       m_bActive = False
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-      ExitSplit(Not m_bToNext And Not m_bToPrev)
+      ExitSplit(Not m_bToNext)
       EgtDraw()
    End Sub
 
@@ -1923,7 +1929,22 @@ Public Class SplitPageUC
       EgtEnableModified()
       ' se modificato salvo ordine e stato delle lavorazioni
       If m_bModified Then
-         SaveOrderMachinig(m_nCurrPhase)
+         ' Al primo posto deve rimanere la disposizione della fase
+         Dim nFirstOperId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+         For i As Integer = m_ItemList.Count() - 1 To 0 Step -1
+            Dim nI As Integer = m_ItemList(i).Ind
+            Dim nMchId As Integer = m_MachiningList(nI).m_nId
+            EgtRelocate(nMchId, nFirstOperId, GDB_POS.AFTER)
+            If m_MachiningList(nI).m_bEnabled Then
+               EgtSetOperationMode(m_MachiningList(nI).m_nId, True)
+               EgtRemoveInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF)
+            Else
+               EgtSetOperationMode(m_MachiningList(nI).m_nId, False)
+               EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF, True)
+            End If
+         Next
+         ' dichiaro ordine salvato
+         m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
       End If
       ' Affondamento ridotto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
@@ -1947,25 +1968,6 @@ Public Class SplitPageUC
       End If
    End Sub
 
-   Friend Sub SaveOrderMachinig(CurrPhase As Integer)
-      ' Al primo posto deve rimanere la disposizione della fase
-      Dim nFirstOperId As Integer = EgtGetPhaseDisposition(CurrPhase)
-      For i As Integer = m_ItemList.Count() - 1 To 0 Step -1
-         Dim nI As Integer = m_ItemList(i).Ind
-         Dim nMchId As Integer = m_MachiningList(nI).m_nId
-         EgtRelocate(nMchId, nFirstOperId, GDB_POS.AFTER)
-         If m_MachiningList(nI).m_bEnabled Then
-            EgtSetOperationMode(m_MachiningList(nI).m_nId, True)
-            EgtRemoveInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF)
-         Else
-            EgtSetOperationMode(m_MachiningList(nI).m_nId, False)
-            EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF, True)
-         End If
-      Next
-      ' dichiaro ordine salvato
-      m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
-   End Sub
-
    Friend Function GetDisabledCutsCount() As Integer
       ' Determino il numero di tagli disabilitati
       Dim nCount As Integer = 0
@@ -2030,7 +2032,7 @@ Public Class SplitPageUC
                NextBtn.IsEnabled = (GetDisabledCutsCount() > 0 And GetSplitCutsCount() = 1)
                ' Altrimenti
             Else
-               ' movimento standard sulla tavola (almeno un taglio disabilitato allora False)
+               ' movimento standard sulla tavola (almeno un taglio disabilitato)
                Dim bStdTab As Boolean = (GetDisabledCutsCount() > 0)
                ' movimento su tavola di scarico
                m_bOnAuxTab = Not bStdTab AndAlso (m_nCurrPhase = EgtGetPhaseCount() And m_bEnableOnAuxTab)

Constants/ConstIni.vb

@@ -116,6 +116,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -223,6 +225,12 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -683,6 +683,17 @@ Public MustInherit Class MachineButton
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
 
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)

DirectCuts/FlatteningCut.xaml.vb

@@ -186,7 +186,10 @@ Public Class FlatteningCut
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' imposto la Z di sicurezza corretta
+      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare

DirectCuts/MachineButtonsUC.xaml.vb

@@ -380,6 +380,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -107,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/DrawPageUC.xaml.vb

@@ -283,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -553,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -1124,6 +1138,30 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert() As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      EgtInsertFile(sTmpFile)
+      ' Ne recupero l'Id
+      Dim nPartId As Integer = EgtGetLastPart()
+      ' Creo la cornice
+      m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+      ' Ricalcolo lavorazioni
+      AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1139,7 +1177,12 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert()
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1153,7 +1196,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
 
    End Sub
 
@@ -1174,7 +1217,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click

DrawImport/FiloTopUC.xaml.vb

@@ -39,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +168,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +252,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +331,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,132 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" 
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +190,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -81,6 +81,8 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      CompoBtn.Visibility = If(GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0, Visibility.Visible, Visibility.Hidden)
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -436,6 +438,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)

Machine/AlarmsPageUC.xaml.vb

@@ -1189,6 +1189,12 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

MainWindow.xaml.vb

@@ -328,8 +328,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2504, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2504, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2505, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -1226,7 +1226,8 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.4.3")>
-<Assembly: AssemblyFileVersion("2.5.4.3")>
+<Assembly: AssemblyVersion("2.5.5.2")>
+<Assembly: AssemblyFileVersion("2.5.5.2")>

OmagCUT.vbproj

@@ -245,6 +245,9 @@
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -519,6 +522,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -1330,6 +1337,9 @@
   <ItemGroup>
     <Resource Include="Resources\ToolChangerPos.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -32,6 +32,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/NewIcons/ruota-oggetto-inclinato.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/NewIcons/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/NewIcons/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/NewIcons/1-BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/NewIcons/2-BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/NewIcons/PartRotOn.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>

Project/OpenPageUC.xaml.vb

@@ -491,7 +491,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

Project/ProjectMgrUC.xaml.vb

@@ -263,8 +263,6 @@ Public Class ProjectMgrUC
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
-      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
-      ResetAllRawPart()
       ' Aggiorno Info C Home
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)

RawPhoto/OtherRefTabWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="OtherRefTabWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="ModifStartEndWD" Height="250" Width="320" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <!--<RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>-->
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.2*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="RefRawTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            
+            <ComboBox Name="RefTabModeCmBx" Grid.Column="2" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <TextBlock Name="RefTabXTxbl" Grid.Column="1" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabXTxBx" Grid.Column="2" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="RefTabYTxbl" Grid.Column="1" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabYTxBx" Grid.Column="2" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

RawPhoto/OtherRefTabWD.xaml.vb

@@ -0,0 +1,108 @@
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class OtherRefTabWD
+   Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Dim m_RawPartPage As RawPartPageUC
+
+   Private m_sPosX As String = "0"
+   Private m_sPosY As String = "0"
+
+   Private m_dPrevOffsetX As Double = 0
+   Private m_dPrevOffsetY As Double = 0
+
+   Private m_SelIndex As Integer = 0
+
+   Sub New(Owner As Window, PosX As String, PosY As String, OffsetX As Double, OffsetY As Double, OtherRefMode As Integer)
+      Me.Owner = Owner
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_sPosX = PosX
+      m_sPosY = PosY
+      m_dPrevOffsetX = OffsetX
+      m_dPrevOffsetY = OffsetY
+      m_SelIndex = OtherRefMode
+   End Sub
+
+   Private Sub OtherRrefTabWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' costruisco il riferimento alla pagina Raw
+      m_RawPartPage = m_MainWindow.m_RawPartPage
+      ' posiziono la finestra
+      Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
+      RefRawTxbl.Text = "Raw reference"
+      RefTabXTxbl.Text = "Position X"
+      RefTabYTxbl.Text = "Position Y"
+      RefTabModeCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList
+      RefTabModeCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
+   End Sub
+
+   Private Sub OtherRrefTabWD_Load(sender As Object, e As EventArgs) Handles Me.Loaded
+      RefTabXTxBx.Text = m_sPosX
+      RefTabYTxBx.Text = m_sPosY
+   End Sub
+
+   Private Sub RefTabModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabModeCmBx.SelectionChanged
+      m_RawPartPage.m_OtherRefTabPos = RefTabModeCmBx.SelectedIndex
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+   Private Sub RefTabXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabXTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dX As Double = 0
+         StringToLen(RefTabXTxBx.Text, dX)
+         If Not (dX > 0 And dX < ptMax.x - ptMin.x) Then
+            If dX > 0 Then
+               dX = ptMax.x - ptMin.x
+            Else
+               dX = 0
+            End If
+            RefTabXTxBx.Text = LenToString(dX, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabX = dX
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub RefTabYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabYTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dY As Double = 0
+         StringToLen(RefTabYTxBx.Text, dY)
+         If Not (dY > 0 And dY < ptMax.y - ptMin.y) Then
+            If dY > 0 Then
+               dY = ptMax.y - ptMin.y
+            Else
+               dY = 0
+            End If
+            RefTabYTxBx.Text = LenToString(dY, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabY = dY
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABX, DoubleToString(RefTabXTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABY, DoubleToString(RefTabYTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      Me.Close()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' riposiziono l'origine
+      m_RawPartPage.m_OtherRefTabX = m_sPosX
+      m_RawPartPage.m_OtherRefTabY = m_sPosY
+      ' ripristino il valore della combobox
+      m_RawPartPage.m_OtherRefTabPos = m_SelIndex
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml

@@ -6,76 +6,76 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="RawPartPage_Loaded" Initialized="RawPartPage_Initialized" Unloaded="RawPartPage_Unloaded">
-      
-   <!-- Definizione della RowPartPage -->
-   <Grid Name="RowPartPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-         
-      </Grid>
-      
-      <!-- Definizione della Grid Laterale -->
-      <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
-      
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="4*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
 
-         <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               GroupName="DefinitionMethod_GrezzoUC"/>
-         <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
+    <!-- Definizione della RowPartPage -->
+    <Grid Name="RowPartPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid per definizione grezzo -->
-         <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid Laterale -->
+        <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
+
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="4*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
-               MaxDropDownHeight="300" Margin="6,0,6,0">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+            <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               GroupName="DefinitionMethod_GrezzoUC"/>
+            <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
 
-            <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+            <!-- Definizione della Grid per definizione grezzo -->
+            <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
                MaxDropDownHeight="300" Margin="6,0,6,0">
                     <ComboBox.ItemTemplate>
                         <DataTemplate>
@@ -85,114 +85,123 @@
                 </ComboBox>
 
                 <TextBlock Name="LengthTxBl" Grid.Row="1" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
+                <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
+                <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
+                <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
+                <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
+                <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         </Grid>
-                  
-         <!-- Definizione della Grid per il materiale -->
-         <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </Grid>
 
-            <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
+            <!-- Definizione della Grid per il materiale -->
+            <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+
+                <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
                MaxDropDownHeight="600">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
+            <!-- Definizione della Grid per Punti -->
+            <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
 
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn"
+                    <ToggleButton Name="AddBtn"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+                    <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            </Grid>
-            
-         </GroupBox>
+                </Grid>
 
-         <!-- Definizione della Grid per Zona rovinata -->
-         <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </GroupBox>
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <!-- Definizione della Grid per Zona rovinata -->
+            <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
 
-               <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            </Grid>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-         </GroupBox>
+                    <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                    <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                </Grid>
 
-         <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
+            </GroupBox>
+
+            <TextBlock Name="OtherRefTabTxBl" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="OtherRefTabChBx" Grid.Row="5" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox}"
+                    HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+            <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
             Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-      </Grid>
-      
-      <!-- Definizione della Grid Inferiore per i Button V e X -->
-      <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="6*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
+        </Grid>
 
-         <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+        <!-- Definizione della Grid Inferiore per i Button V e X -->
+        <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-         <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="OkBtn" Grid.Column="5" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OtherRefTabBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OkBtn" Grid.Column="6" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-         </Button>
-         
-      </Grid>
-      
-   </Grid>
-   
+            </Button>
+
+        </Grid>
+
+    </Grid>
+
 </UserControl>

RawPhoto/RawPartPageUC.xaml.vb

@@ -1,6 +1,9 @@
 Imports System.Globalization
+Imports System.IO
+Imports System.Windows.Media.Animation
 Imports EgtUILib
 Imports EgtWPFLib
+Imports Microsoft.VisualBasic.Devices
 
 Public Class RawPartPageUC
 
@@ -78,6 +81,16 @@ Public Class RawPartPageUC
    ' Costante raggio cerchietto
    Private Const RAD_CIRCLE As Double = 30
 
+   ' Riferimento grezzo
+   Private m_bEnableOtherRefTab As Boolean = False
+   Private m_bOtherRefTab As Boolean
+   Public m_OtherRefTabX As Double = 0
+   Public m_OtherRefTabY As Double = 0
+   Public m_OtherRefTabList(3) As String
+   Public m_OtherRefTabPos As Integer = 0
+   Private m_nOtherRefTabLay As Integer = GDB_ID.NULL
+   Private m_OtherRefTabPoint As Point3d
+
    ' mostra la pagina delle lavorazioni
    Private m_SmartMachiningPage As Boolean = False
 
@@ -105,6 +118,13 @@ Public Class RawPartPageUC
       FROM_SAW = 7
    End Enum
 
+   Private Enum OTHERREFMODE As Integer
+      BL = 0
+      BR = 1
+      TR = 2
+      TL = 3
+   End Enum
+
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
 
       'Creazione della Page UserControl e relative impostazioni
@@ -145,6 +165,13 @@ Public Class RawPartPageUC
          ReDim Preserve m_RawModeListEx(3)
       End If
       RawModeCmBx.ItemsSource = m_RawModeList
+
+      ' Creo la lista dei riferimenti tavola 
+      m_OtherRefTabList(OTHERREFMODE.BL) = "Bottom left"
+      m_OtherRefTabList(OTHERREFMODE.BR) = "Bottom right"
+      m_OtherRefTabList(OTHERREFMODE.TR) = "Top right"
+      m_OtherRefTabList(OTHERREFMODE.TL) = "Top left"
+
       ' lista per selezione RawModeDamaged
       m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
       m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
@@ -184,6 +211,8 @@ Public Class RawPartPageUC
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
+
+      OtherRefTabTxBl.Text = "New Ref On Tab"
    End Sub
 
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -277,6 +306,12 @@ Public Class RawPartPageUC
             Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
          End If
       End If
+
+      ' Carico le info del riferimento alternativo della tavola
+      m_nOtherRefTabLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      LoadOtherRefTab()
+
       ' Assegno dati grezzo rettangolare ai textbox
       LengthTxBx.Text = LenToString(m_RawLength, 2)
       WidthTxBx.Text = LenToString(m_RawWidth, 2)
@@ -320,6 +355,36 @@ Public Class RawPartPageUC
       Next
    End Sub
 
+   Private Sub LoadOtherRefTab()
+      m_bEnableOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_ENABLEOTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      If Not m_bEnableOtherRefTab Then
+         OtherRefTabBtn.Visibility = Visibility.Collapsed
+         OtherRefTabChBx.Visibility = Visibility.Collapsed
+         OtherRefTabTxBl.Visibility = Visibility.Collapsed
+         Return
+      End If
+      m_bOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_OTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_OtherRefTabX = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABX, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabY = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABY, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabPos = GetPrivateProfileInt(S_RAWPART, K_OTHERREFTABPOS, 0, m_MainWindow.GetIniFile())
+      ' RefTabPosCmbx.SelectedIndex = m_OtherRefTabPos
+      OtherRefTabChBx.IsChecked = m_bOtherRefTab
+      ' se riferimento tavola differente da quello atteso
+      If m_bOtherRefTab Then
+         ' dasibilito la modifica dei parametri di Offset
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+         UpdateOffsetText()
+      End If
+
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      ' EgtDraw()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -930,6 +995,13 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = True
+               OtherRefTabBtn.IsEnabled = True
+               ' disegno il riferimento
+               m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+               CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+            End If
          Case RAWMODE.BY_POINTS
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -946,6 +1018,12 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            ' disettivo la possibilità di modificare il riferimento 
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -962,6 +1040,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED
             RawModeCmBx.IsEnabled = False
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -980,6 +1063,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_PHOTO
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -992,6 +1080,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ' Visualizzo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Visible
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1008,6 +1101,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1024,6 +1122,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -1040,11 +1143,26 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
       End Select
+      ' se abilitato nuovo riferimento del grezzo disabilito le text per offset
+      If OtherRefTabChBx.IsChecked Then
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+      End If
    End Sub
 
    Private Sub OutlineBtn_Click(sender As Object, e As RoutedEventArgs) Handles OutlineBtn.Click
       If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
+         If m_bEnableOtherRefTab Then
+            OtherRefTabTxBl.Visibility = Visibility.Visible
+            OtherRefTabBtn.Visibility = Visibility.Visible
+            OtherRefTabChBx.Visibility = Visibility.Visible
+         End If
          ' m_ActiveRawMode = RAWMODE.BY_POINTS
          m_ActiveRawMode = m_PrecActiveRawMode
          RawModeCmBx.SelectedIndex = m_ActiveRawMode
@@ -1055,6 +1173,12 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub DamagedBtn_Click(sender As Object, e As RoutedEventArgs) Handles DamagedBtn.Click
+      If m_bEnableOtherRefTab Then
+         OtherRefTabTxBl.Visibility = Visibility.Hidden
+         OtherRefTabBtn.Visibility = Visibility.Hidden
+         OtherRefTabChBx.Visibility = Visibility.Hidden
+         OtherRefTabBtn.IsEnabled = False
+      End If
       m_PrecActiveRawMode = m_ActiveRawMode
       If m_PrecActiveRawMode = RAWMODE.FROM_LASER Then
          m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
@@ -1843,6 +1967,7 @@ Public Class RawPartPageUC
          WidthTxBx.Text = LenToString(m_RawWidth, 2)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 17) & " " & LenToString(dMaxWidth, 2))   'Massima larghezza =
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub HeightTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HeightTxBx.EgtClosed
@@ -1872,6 +1997,7 @@ Public Class RawPartPageUC
          HeightTxBx.Text = LenToString(m_RawHeight, 3)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 18)) 'Non sono ammessi spessori negativi
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub OffsetXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetXTxBx.EgtClosed
@@ -1918,6 +2044,108 @@ Public Class RawPartPageUC
       End If
    End Sub
 
+#Region "OTHERREFTAB"
+
+   Private Sub OtherRefTabChBx_Click(sender As Object, e As EventArgs) Handles OtherRefTabChBx.Click
+      If OtherRefTabChBx.IsChecked Then
+         m_bOtherRefTab = True
+         MoveRawToOtherRefTab()
+      Else
+         m_bOtherRefTab = False
+         'MoveRawToMaiRefTab()
+      End If
+      UpdateOffsetText()
+      RawModeView()
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTAB, If(m_bOtherRefTab, "1", "0"), m_MainWindow.GetIniFile())
+   End Sub
+
+   Public Sub RefTabModeChange()
+      MoveRawToMaiRefTab()
+      MoveRawToOtherRefTab()
+      UpdateRefTabDraw()
+      UpdateOffsetText()
+   End Sub
+
+   Public Sub UpdateRefTabDraw()
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      EgtDraw()
+   End Sub
+
+   Private Sub UpdateOffsetText()
+      Dim ptRawMin, ptRawMax As Point3d
+      Dim dInvertKerf As Double = 1
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ' kerf
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_KERF, m_RawKerf)
+         ' verifico se il kerf è negativo
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_INVERT_KERF, dInvertKerf)
+         ' aggiorno dati grezzo
+         If dInvertKerf < 0 Then
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y
+         Else
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x + m_RawKerf * dInvertKerf
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y + m_RawKerf * dInvertKerf
+         End If
+         OffsetXTxBx.Text = LenToString(m_RawOffsX, 2)
+         OffsetYTxBx.Text = LenToString(m_RawOffsY, 2)
+      End If
+   End Sub
+
+   Private Sub MoveRawToOtherRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.BR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub MoveRawToMaiRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.BL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub OtherRefTabBtn_Click(sender As Object, e As EventArgs) Handles OtherRefTabBtn.Click
+      ' apro la finestra per gestire il riferimento
+      Dim OthWD As New OtherRefTabWD(m_MainWindow, LenToString(m_OtherRefTabX, 2), LenToString(m_OtherRefTabY, 2), m_RawOffsX, m_RawOffsY, m_OtherRefTabPos)
+      OthWD.ShowDialog()
+   End Sub
+
+#End Region    ' OtherRefTab
+
    Private Sub KerfTxBx_EgtClosed(sender As Object, e As EventArgs) Handles KerfTxBx.EgtClosed
       Dim dKerf As Double
       If Not StringToLen(KerfTxBx.Text, dKerf) Then
@@ -1960,6 +2188,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf >= dMinKerf And dKerf < 0 Then
@@ -2022,6 +2252,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf < dMinKerf Then
@@ -2267,6 +2499,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Unloaded(sender As Object, e As RoutedEventArgs)
       ' Rimuovo layer temporaneo per crocette
       EgtErase(m_nTempLay)
+      EgtErase(m_nOtherRefTabLay)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -2582,4 +2815,44 @@ Public Class RawPartPageUC
       Return True
    End Function
 
+   Private Function CreateOtherRefTab(nLayerId As Integer, ptP As Point3d) As Boolean
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      If Not m_bOtherRefTab Or Not OtherRefTabChBx.IsEnabled Then
+         EgtDraw()
+         Return False
+      End If
+
+      If File.Exists(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge") Then
+         ' Aggiungo disegno staffa fermo pezzo
+         EgtInsertFile(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge")
+         Dim nLastPart As Integer = EgtGetLastPart()
+         Dim Lay As Integer = EgtGetFirstInGroup(nLastPart)
+         Dim Ent As Integer = EgtGetFirstInGroup(Lay)
+         While Ent <> -1
+            Dim NextEnt As Integer = EgtGetNext(Ent)
+            EgtRelocate(Ent, nLayerId)
+            EgtMove(Ent, ptP - Point3d.ORIG)
+            EgtRotate(Ent, ptP, Vector3d.Z_AX, 90 * m_OtherRefTabPos)
+            Ent = NextEnt
+         End While
+         EgtErase(nLastPart)
+      Else
+         ' Aggiungo crocette
+         ptP += New Vector3d(0, 0, 0.15)
+         Dim vtCrossX As New Vector3d(100, 0, 0)
+         Dim vtCrossY As New Vector3d(0, 100, 0)
+         Dim vtCrossZ As New Vector3d(0, 0, 100)
+         Dim nCrossId1 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossX)
+         EgtSetColor(nCrossId1, New Color3d(245, 0, 0))
+         Dim nCrossId2 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossY)
+         EgtSetColor(nCrossId2, New Color3d(0, 245, 0))
+         Dim nCrossId3 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossZ)
+         EgtSetColor(nCrossId3, New Color3d(0, 0, 245))
+      End If
+
+      EgtDraw()
+      'EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyTest.nge", NGE.BIN)
+      Return True
+   End Function
+
 End Class

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib
+Imports OmagCUT.VeinMatchingWindow
 
 Public Class VeinMatchingWindow
 
@@ -19,6 +20,11 @@ Public Class VeinMatchingWindow
    Private m_nIdToSel As Integer = GDB_ID.NULL
    Private m_nIdToDesel As Integer = GDB_ID.NULL
 
+   Enum ALETTE
+      F = 2
+      A = 1
+   End Enum
+
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
       VeinMatchingSceneHost.Child = VeinMatchingScene
@@ -267,7 +273,7 @@ Friend Module VeinMatching
       Dim nRegId As Integer = EgtGetFirstInGroup(nRegLayId)
       While nRegId <> GDB_ID.NULL
          If EgtGetType(nRegId) = GDB_TY.SRF_FRGN Then
-               Exit While
+            Exit While
          End If
          nRegId = EgtGetNext(nRegId)
       End While
@@ -364,19 +370,21 @@ Friend Module VeinMatching
       ' Imposto il contesto del progetto
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Riattivo il gruppo di lavoro
-      EgtSetCurrMachGroup( EgtGetFirstMachGroup())
+      EgtSetCurrMachGroup(EgtGetFirstMachGroup())
       ' Verifico quali pezzi sono nel grezzo, per dichiararlo al VM
-      nId = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+      nId = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
       While nId <> GDB_ID.NULL
          ' Dichiaro pezzo nel grezzo per VM
-         VeinMatching.OnInsertPartInRaw( nId)
+         VeinMatching.OnInsertPartInRaw(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPartInRawPart(nId)
       End While
       ' Ripristino visualizzazione di eventuali pezzi in parcheggio
       ShowParkedParts()
       ' Ripristino il contesto corrente
-      EgtSetCurrentContext( nCurrCtx)
+      EgtSetCurrentContext(nCurrCtx)
+
+      ' EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyVeinMatch.nge", NGE.TEXT)
       Return True
    End Function
 
@@ -422,11 +430,11 @@ Friend Module VeinMatching
       nCurrId = EgtGetFirstNameInGroup(nVeinId2, NAME_PREVIEW)
       EgtSetStatus(nCurrId, GDB_ST.OFF)
       ' Se esiste OutLoop.orig OutLoop -> OutLoop.mach e OutLoop.orig -> OutLoop
-      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP & ".orig")
+      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP & ".orig")
       If nOutLoopOrig <> GDB_ID.NULL Then
-         Dim nOutLoop As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP)
-         EgtSetName( nOutLoop, NAME_OUTLOOP & ".mach")
-         EgtSetName( nOutLoopOrig, NAME_OUTLOOP)
+         Dim nOutLoop As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP)
+         EgtSetName(nOutLoop, NAME_OUTLOOP & ".mach")
+         EgtSetName(nOutLoopOrig, NAME_OUTLOOP)
       End If
       ' Se necessario, ripristino il contesto originale
       If nCurrCtx > 0 Then EgtSetCurrentContext(nCurrCtx)
@@ -555,8 +563,8 @@ Friend Module VeinMatching
 
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
-         End If
-         EgtDraw()
+      End If
+      EgtDraw()
       EgtSetCurrentContext(nMainCtx)
       Return True
    End Function
@@ -1039,37 +1047,44 @@ Friend Module VeinMatching
    End Function
 
    Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
-
+      ' A: alzatina, F: frontalino
       Dim nType As Integer
       If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
 
-      Dim ptSRef, ptERef, ptE As Point3d
+      Dim ptSRef, ptERef, ptS, ptE As Point3d
+      ' Piano cucina
       If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
       If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      ' AlzFront
+      If Not EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptS) Then Return False
       If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
 
+      ' vettore lato cucina
+      Dim vtRotRef As Vector3d = ptERef - ptSRef
+      ' vettore lato AlzFront
+      Dim vtRot As Vector3d = ptE - ptS
+
       ' ruoto il solido intorno al lato di riferimento
-      Dim vtRot As Vector3d = ptERef - ptSRef
-      If nType = 1 Then
-         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
-      ElseIf nType = 2 Then
+      If nType = ALETTE.A Then
          EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+      ElseIf nType = ALETTE.F Then
+         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
       End If
 
       ' punto di riferimento per la traslazione sul solido
       Dim ptSolid As Point3d
-      If nType = 1 Then
+      If nType = ALETTE.A Then
          ' cerco id della curva che definisce la front face
          Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
          Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
-         EgtStartPoint(nFrontCrvId, ptSolid)
-      ElseIf nType = 2 Then
-         EgtStartPoint(Item.SideId, ptSolid)
+         EgtStartPoint(nFrontCrvId, GDB_ID.ROOT, ptSolid)
+      ElseIf nType = ALETTE.F Then
+         EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptSolid)
       End If
 
-      Dim ItemFrame As New Frame3d
-      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
-      ptSolid.ToGlob(ItemFrame)
+      ' Dim ItemFrame As New Frame3d
+      ' If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ' ptSolid.ToGlob(ItemFrame)
 
       'punto di riferimento per la traslazione sul piano cucina
       Dim ptKitchen As Point3d = ptERef
@@ -1077,6 +1092,16 @@ Friend Module VeinMatching
       Dim vtMove As Vector3d = ptKitchen - ptSolid
       EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
 
+      ' eventualmente ruoto per allineare l'alzatina al piano cucina
+      Dim dLRef, dAngVRef, dAngHRef As Double
+      vtRotRef.ToSpherical(dLRef, dAngVRef, dAngHRef)
+      Dim dL, dAngV, dAngH As Double
+      vtRot.Rotate(Vector3d.Z_AX, 180)
+      vtRot.ToSpherical(dL, dAngV, dAngH)
+      Dim dDelta As Double = dAngHRef - dAngH
+      If Math.Abs(dDelta) < EPS_ANG_SMALL Then Return True
+      EgtRotate(Item.PartId, ptKitchen, Vector3d.Z_AX, dDelta, GDB_RT.GLOB)
+
       Return True
    End Function
 
@@ -1206,7 +1231,7 @@ Friend Module VeinMatching
       ' Se necessario, cambio contesto
       If m_nVeinCtx <> nCurrCtx Then
          If EgtSetCurrentContext(m_nVeinCtx) Then
-            Return If( nCurrCtx > 0, nCurrCtx, -2)
+            Return If(nCurrCtx > 0, nCurrCtx, -2)
          Else
             Return 0
          End If
@@ -1268,7 +1293,7 @@ Friend Module VeinMatching
       While nId <> GDB_ID.NULL
          Dim nOriId As Integer
          If EgtGetInfo(nId, KEY_ORI_ID, nOriId) AndAlso nOriId = nPartId Then
-               Exit While
+            Exit While
          End If
          nId = EgtGetNextPart(nId)
       End While