Correzione DoubleClick OnOff scena

- modifica a taglio singolo per acquisizione punto da macchina tipo MultiCut.

AboutBox/AboutBoxWD.xaml

@@ -23,7 +23,8 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.25*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.25*"/>
          </Grid.RowDefinitions>
@@ -35,7 +36,7 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Border Name="LogoBrd" Grid.Column="1">
-               <Image Source="../Resources/AboutBoxImage.png" Stretch="Uniform"/>
+                    <Image Source="../Resources/NewIcons/Logo-Egalware (3).png" Stretch="Uniform"/>
             </Border>
          </Grid>
          <TextBlock Name="DescriptionLbl" Grid.Column="1" Grid.Row="3" HorizontalAlignment="Center"
@@ -44,13 +45,17 @@
             VerticalAlignment="Center" FontSize="18"/>
          <TextBlock Name="KeyLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
+
+            <TextBlock Name="AssStatusLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
+
+            <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+            VerticalAlignment="Center" FontSize="18"/>
+         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="9" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="15" />
-         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="10" IsCancel="True"
+         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="11" IsCancel="True"
             Style="{DynamicResource OmagCut_WindowGrayTextButton}" Margin="1,0"/>
 
       </Grid>

AboutBox/AboutBoxWD.xaml.vb

@@ -33,6 +33,19 @@ Public Class AboutBoxWD
 #Else
       KeyLbl.Text = sKey & " - " & sOpts
 #End If
+      ' COPIATO da codice CAM5
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         ElseIf nAssLeftDays > 0 Then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+      AssStatusLbl.Text = sAssStatus
       CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
       MachineLbl.Text = "Machine : " & m_MainWindow.m_CurrentMachine.sMachineName
       ProjectLbl.Text = "Project : " & m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()

CAM/CamAuto.vb

@@ -164,6 +164,45 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllSplitCut() As Boolean
+      Dim PartList As New List(Of Integer)
+      ' Ricerca nei grezzi dei pezzi (devono essere ricercati tra quelli presenti nei grezzi)
+      Dim bOk As Boolean = True
+      ' Recupero il numero di fasi presenti nel progetto
+      Dim nPhaseCount As Integer = EgtGetPhaseCount()
+      For nPhase As Integer = 1 To nPhaseCount
+         EgtSetCurrPhase(nPhase)
+         Dim nRawId As Integer = EgtGetFirstRawPart()
+         While nRawId <> GDB_ID.NULL
+            Dim nParId As Integer = EgtGetFirstPartInRawPart(nRawId)
+            If EgtVerifyRawPartPhase(nRawId, nPhase) Then
+               While nParId <> GDB_ID.NULL
+                  Dim nNextParId As Integer = EgtGetNextPartInRawPart(nParId)
+                  ' verifico se il pezzo passato è un taglio di sepatazione (il nome deve contenere "SpliCut")
+                  Dim sName As String = String.Empty
+                  If EgtGetName(nParId, sName) AndAlso sName.Contains(SPLIT_CUT) Then
+                     ' Rimuovo il pezzo dal grezzo
+                     If EgtRemovePartFromRawPart(nParId) Then
+                        ' Salvo l'indice del pezzo se non è stato già inserito
+                        Dim nIndex As Integer = PartList.FirstOrDefault(Function(nId) nId = nParId)
+                        If nIndex = 0 Then PartList.Add(nParId)
+                     End If
+                  End If
+                  nParId = nNextParId
+               End While
+            End If
+            nRawId = EgtGetNextRawPart(nRawId)
+         End While
+      Next
+      ' Reimposto la prima fase del progetto
+      EgtSetCurrPhase(1)
+      ' Procedo ad eliminare il pezzo
+      For Each Item As Integer In PartList
+         bOk = bOk And EgtErase(Item)
+      Next
+      Return bOk
+   End Function
+
    Friend Function ResetAllRawPart() As Boolean
       Dim nPhase As Integer = 1
       Dim nOtherRaw As Integer = EgtGetFirstRawPart()

CadCuts/CadCutPageUC.xaml

@@ -30,7 +30,7 @@
          </Grid.ColumnDefinitions>
 
          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <Image Name="PhotoIMG" Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
             <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>

CadCuts/ChooseTestToolWD.xaml

@@ -0,0 +1,61 @@
+<Window x:Class="ChooseTestToolWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="OpenFile" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <!--TextAlignment="Center"
+                  FontSize="20"
+                  VerticalAlignment="Center"-->
+            <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+               ItemsSource="{Binding ItemList}">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding ToolAlias}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

CadCuts/ChooseTestToolWD.xaml.vb

@@ -0,0 +1,281 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+
+Public Class ChooseTestToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpToolList As New ObservableCollection(Of TestTool)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpToolList
+      FilePathTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 45)              ' Selezionare l'utensile da tastare
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpTool()
+      ' ricerco l'utensile della lavorazione indicata
+      Dim Item As TestTool = m_SetUpToolList.FirstOrDefault(Function(x) x.ToolName = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv)
+      Dim Index As Integer = m_SetUpToolList.IndexOf(Item)
+      If Index < 0 Then
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpToolList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpToolList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+   Private Function LoadSetUpTool() As Boolean
+      Dim sNameTool As String = String.Empty
+      Dim sHeadTool As String = String.Empty
+      Dim nExitTool As Integer = 0
+
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la lama
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, True))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la fresa
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto il foretto
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+
+      sNameTool = "Laser point"
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto laser di puntamento
+         m_SetUpToolList.Add(New TestTool(sNameTool, ""))
+      End If
+
+      sNameTool = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto WJ
+         m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+      End If
+
+      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la fresa
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto il foretto
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+
+         Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               sNameTool = ToolChangerPos.sTool
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Imposto la lama
+                  m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+               End If
+            Next
+            Return True
+
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+         Case Else
+            Return False
+      End Select
+
+
+      Return True
+   End Function
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   ' restituisce l'oggetto selezionato in elenco e lo imposta come attivo
+   Friend Function GetSelectedTool() As TestTool
+      Dim SelTestTool As TestTool = DirectCast(SetUpToolListBox.SelectedItem, TestTool)
+      If SelTestTool.ToolAlias = "Laser point" Then
+         SelTestTool.ToolHead = "H3"
+         SelTestTool.ToolExit = 1
+         SelTestTool.ToolIsSaw = False
+         SelTestTool.ToolIsLaser = True
+      Else
+         EgtTdbSetCurrTool(SelTestTool.ToolName)
+         Dim sHeadTool As String = String.Empty
+         Dim nExitTool As Integer = 0
+         Dim sTypeTool As String = String.Empty
+         Dim nTypeTool As Integer
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, nTypeTool)
+         EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHeadTool)
+         EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExitTool)
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, sTypeTool)
+         SelTestTool.ToolHead = sHeadTool
+         SelTestTool.ToolExit = nExitTool
+         SelTestTool.ToolType = nTypeTool
+         SelTestTool.ToolIsSaw = (nTypeTool = MCH_TY.SAW_STD)
+         SelTestTool.ToolIsLaser = False
+      End If
+
+      Return SelTestTool
+   End Function
+
+End Class
+
+Public Class TestTool
+
+   Private m_ToolAlias As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_ToolHead As String = "H1"
+   Private m_ToolExit As Integer = 1
+   Private m_ToolIsSaw As Boolean = False
+   Private m_ToolIsLaser As Boolean = False
+   Private m_ToolType As Integer = -1
+
+   Public Property ToolAlias As String
+      Get
+         Return m_ToolAlias
+      End Get
+      Set(value As String)
+         m_ToolAlias = value
+      End Set
+   End Property
+
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   Public Property ToolHead As String
+      Get
+         Return m_ToolHead
+      End Get
+      Set(value As String)
+         m_ToolHead = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property ToolIsSaw As Boolean
+      Get
+         Return m_ToolIsSaw
+      End Get
+      Set(value As Boolean)
+         m_ToolIsSaw = value
+      End Set
+   End Property
+
+   Public Property ToolIsLaser As Boolean
+      Get
+         Return m_ToolIsLaser
+      End Get
+      Set(value As Boolean)
+         m_ToolIsLaser = value
+      End Set
+   End Property
+
+   Sub New(sToolAlias As String, sToolName As String)
+      m_ToolAlias = sToolAlias
+      m_ToolName = sToolName
+   End Sub
+
+End Class

CadCuts/MoveRawPartPage.xaml.vb

@@ -127,11 +127,10 @@ Public Class MoveRawPartPage
          UnloadPartsBtn.Content = "Go to MOVE part"
          ' altrimenti, aggiorno visualizzazione
       ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
-         EgtDraw()
          UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
       '---------------------------- AUX TABLE ---------------------------- 
-
+      EgtDraw()
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
@@ -341,7 +340,6 @@ Public Class MoveRawPartPage
                   If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
-
                ' verifico che il pezzo precedente possa essere depositato correttamente
                If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
                   ' mantengo la selezione del pezzo
@@ -351,6 +349,15 @@ Public Class MoveRawPartPage
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
                End If
+               ' Verifico che il pezzo corrente sia prelevabile - versione 2.6c3 -
+               If VerifyCollisionWithOtherRawPart(nId, True) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
                ' salvo l'indice del pezzo correntemente attaccato alle ventose
                m_CurrRawOnVacuum = nId
 
@@ -370,7 +377,15 @@ Public Class MoveRawPartPage
                   VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
                   VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  If PutVacuumCupsOnRaw(nId, rmData) Then
+
+                  VacuumCups.ResetHeadName()
+                  Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(nId, rmData)
+                  If Not bPutVacuum Then
+                     Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
+                     If bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(nId, rmData)
+                  End If
+
+                  If bPutVacuum Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
                      ' Aggiorno i dati
@@ -392,6 +407,8 @@ Public Class MoveRawPartPage
                         m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
                      End If
                   End If
+
+
                End If
             End If
             EgtDraw()
@@ -411,7 +428,7 @@ Public Class MoveRawPartPage
    End Sub
 
    ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
-   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+   Private Function VerifyCollisionWithOtherRawPart_0(nIdOnVacumm As Integer) As Boolean
       ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
       If m_SplitPage.m_bOnAuxTab Then Return False
       If nIdOnVacumm = GDB_ID.NULL Then Return False
@@ -445,6 +462,69 @@ Public Class MoveRawPartPage
       Return False
    End Function
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi - versione 2.6c3 -
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer, Optional IsTaking As Boolean = False) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      ' recupero il contorno del'ID attaccato alle ventose e da questo genero una superificie
+      Dim nIdUpRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawUpReg")
+      Dim nIdDwnRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawDwnReg")
+      ' recupero gli ID di tutti i grezzi della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo e genero la sua sueperificie
+            Dim nIdUpRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawUpReg")
+            Dim nIdDwnRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawDwnReg")
+            ' creo la copia delle superifici
+            Dim nCopy_IdDwnRegionOnVac As Integer = EgtCopyGlob(nIdDwnRegionOnVac, m_nTempId)
+            Dim nCopy_nIdUpRegion As Integer = EgtCopyGlob(nIdUpRegion, m_nTempId)
+            ' PRELIEVO
+            If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdUpRegion) Then
+               ' se esite una superficie allora esiste un'intersezione
+               If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                  EgtErase(m_nTempId)
+                  ' Esco: Intersezione TROVATA → true
+                  Return True
+               End If
+            End If
+            If Not IsTaking Then
+               ' DEPOSITO : devono essere esguiti due controlli ulteririori
+               Dim nCopy_IdUpRegionOnVac As Integer = EgtCopyGlob(nIdUpRegionOnVac, m_nTempId)
+               Dim nCopy_nIdDwnRegion As Integer = EgtCopyGlob(nIdDwnRegion, m_nTempId)
+               If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdDwnRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+               If EgtSurfFrIntersect(nCopy_IdUpRegionOnVac, nCopy_nIdUpRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdUpRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
    Private Function VerifyIsNewScrap(nMyId As Integer) As Boolean
       Dim nVal As Integer = 0
       If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
@@ -779,6 +859,12 @@ Public Class MoveRawPartPage
       Return bOk
    End Function
 
+   Private Sub RemovePart_KeyCancel(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles m_CurrProjPage.OnKeyCancelDownScene
+      If e.KeyCode = System.Windows.Forms.Keys.Delete Then
+         RemovePartBtn_Click(Nothing, Nothing)
+      End If
+   End Sub
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -846,6 +932,7 @@ Public Class MoveRawPartPage
       ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
       RefreshVisibility()
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
@@ -1281,7 +1368,7 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_SplitPage.m_bShow Then
          ' verifico se la fase successiva è uno scarico frontale
          If NextOperationIsUnloading(m_nCurrDisposition) Then
@@ -1292,6 +1379,7 @@ Public Class MoveRawPartPage
             m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
             GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
             EgtDraw()
+            EnableButtons()
             Return
          ElseIf IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 AndAlso Not NextOperationIsUnloading(m_nCurrDisposition) Then
             ' imposto la nuova fase, al termine della Sub verrà caricata la pagina Split nella fase indicata ora
@@ -1424,7 +1512,12 @@ Public Class MoveRawPartPage
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
       UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
       If m_SplitPage.m_bShow Then
-         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         ' se ultima fase (e non sacrico su tavola)
+         If m_nCurrPhase = EgtGetPhaseCount() And m_SplitPage.m_bOnAuxTab Then
+            NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         Else
+            NextBtn.IsEnabled = (m_nCurrPhase <= EgtGetPhaseCount())
+         End If
       Else
          ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
          If Not bExistsMachining Then
@@ -1432,7 +1525,6 @@ Public Class MoveRawPartPage
          Else
             NextBtn.IsEnabled = True
          End If
-
       End If
    End Sub
 

CadCuts/NestPageUC.xaml

@@ -100,7 +100,32 @@
                VerticalAlignment="Center" />
          </Button>
 
-            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
+          <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG0_Reg" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" Visibility="Hidden">
+                <ToggleButton Name="AddPointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ModPointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Move-Spot-RegImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="RemovePointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG1_Reg" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" Visibility="Hidden">
+                <Button Name="AdjustPointRegBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Muovi-grezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="ActivatePointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ON_OFF-REGImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3">
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>

CadCuts/NestPageUC.xaml.vb

@@ -1,4 +1,8 @@
-Imports EgtUILib
+Imports System.ComponentModel
+Imports System.Reflection
+Imports System.Windows.Forms
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 Imports EgtWPFLib
 
 Public Class NestPageUC
@@ -26,6 +30,7 @@ Public Class NestPageUC
    ' Id della curva e del taglio selezionati per eseguire il test
    Friend m_CurrSelectedCurv As Integer = GDB_ID.NULL
    Friend m_CurrSelectedSawCurv As Integer = GDB_ID.NULL
+   Friend m_CurrToolFromSelectedSawCurv As String = String.Empty
 
    ' Id del rettangolo, del taglio e della curva da modificare tramite Drag
    Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
@@ -104,12 +109,17 @@ Public Class NestPageUC
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
       DragRettanleBtn.ToolTip = "Strech"
 
+      ' Nascondo i pulsanti in uso quando attivo la modalità REG
+      UG0_Reg.Visibility = Visibility.Hidden
+
       Dim nColumsIn_UG1 As Integer = 2
       ' gestisco la visualizzazione del comando PAN (per il drag dei rettangoli)
       m_bIsVisibleDragRettangle = (GetPrivateProfileInt(S_NEST, K_DRAG_RETTANGLE, 0, m_MainWindow.GetIniFile()) <> 0)
       If Not m_bIsVisibleDragRettangle Then
          nColumsIn_UG1 = 1
          DragRettanleBtn.Visibility = Visibility.Collapsed
+      Else
+         DragRettanleBtn.Visibility = Visibility.Visible
       End If
 
       ' gestisco la visualizzazione del comando Splt (per i tagli waterjet)
@@ -186,6 +196,50 @@ Public Class NestPageUC
       ShowParkedParts()
       ' Garantisco visibilità eventuale contorno da foto
       m_CurrProjPage.ShowContour(True)
+
+      ' Disabilito impostazione modificato
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+
+      ' Verifico se esiste il gruppo "REG"
+      Dim nIdRaws As Integer = EgtGetParent(m_CurrProjPage.m_nRawId)
+      Dim nIdReg As Integer = EgtGetFirstNameInGroup(EgtGetParent(nIdRaws), "Reg")
+      ' Resetto le variabili di conteggio
+      m_nCountSpot = 0
+      m_nCountSpotCUT = 0
+      If nIdReg <> GDB_ID.NULL Then
+         m_nRegGroupId = nIdReg
+         EgtGetInfo(m_nRegGroupId, COUNTSPOT, m_nCountSpot)
+         EgtGetInfo(m_nRegGroupId, COUNTSPOTCUT, m_nCountSpotCUT)
+         ' Lo nascondo
+         EgtSetStatus(m_nRegGroupId, GDB_ST.OFF)
+      Else
+         ' Creo layer per definire i punti di REG
+         m_nRegGroupId = EgtCreateGroup(EgtGetParent(nIdRaws))
+         EgtSetName(m_nRegGroupId, REG)
+         m_nCountSpot = 0
+         m_nCountSpotCUT = 0
+      End If
+      EgtOutLog("Numero di SPOT caricati da OFFICE: " & m_nCountSpot.ToString)
+      ' Se nel progetto non sono inseriti punti SpotReg disabilito i comandi
+      If m_nCountSpot < 1 Then
+         UG0_Reg.IsEnabled = False
+         UG1_Reg.IsEnabled = False
+         EgtOutLog("   Abilito comandi gestione SPOT")
+      Else
+         UG0_Reg.IsEnabled = True
+         UG1_Reg.IsEnabled = True
+         EgtOutLog("   Disabilito comandi gestione SPOT")
+      End If
+      ' Se nel progetto non sono inseriti punti SpotRegCUT provvedo ad aggiungerli
+      If m_nCountSpotCUT < 1 Then
+         InsertSpotRegistration()
+         EgtOutLog("      Creo SPOT_CUT")
+      End If
+
+      ' Se necessario riabilito impostazione modificato
+      If bOldEnMod Then EgtEnableModified()
+
    End Sub
 
    Public Sub UpdateStepsOnUI()
@@ -209,7 +263,9 @@ Public Class NestPageUC
       End If
       ' Se esiste un elemento selezionato
       EgtResetMark(m_CurrSelectedSawCurv)
-      ' provo a riconoscere il valore medio del segmento 
+      m_CurrToolFromSelectedSawCurv = String.Empty
+      ' ripulisco da eventuali messaggi
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(False, True, False, False, False)
       Dim nSelMy As Integer
@@ -234,20 +290,52 @@ Public Class NestPageUC
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
                Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
-               Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
-               If Not EgtGetGroupObjs(nIdSaw) Then
-                  m_CurrSelectedSawCurv = nIdSaw
-                  m_CurrSelectedCurv = nIdMy
-                  EgtSetMark(nIdSaw)
-                  EgtSelectObj(nIdMy)
-                  EgtDraw()
-                  Exit While
-               End If
+
+               Dim nIdMachining As Integer = EgtGetFirstInGroup(nIdPV)
+               While nIdMachining <> GDB_ID.NULL
+                  Dim sNameMachining As String = String.Empty
+                  EgtGetName(nIdMachining, sNameMachining)
+                  If sNameMachining.Contains(nIdMy.ToString) Then
+                     Exit While
+                  End If
+                  nIdMachining = EgtGetNext(nIdMachining)
+               End While
+
+               ' recupero la lavorazione associata nel gruppo Opers
+               Dim sIdRefMachining As Integer = -1
+               EgtGetInfo(nIdMachining, "MId", sIdRefMachining)
+               EgtSetCurrMachining(sIdRefMachining)
+               ' recupero il nome dell'utensile associato alla lavorazione
+               Dim sToolCurrMachining As String = String.Empty
+               EgtGetMachiningParam(MCH_MP.TOOL, sToolCurrMachining)
+               ' seleziono le entità nel disegno
+               m_CurrToolFromSelectedSawCurv = sToolCurrMachining
+               m_CurrSelectedSawCurv = nIdMachining
+               m_CurrSelectedCurv = nIdMy
+               EgtSetMark(nIdMachining)
+               EgtSelectObj(nIdMy)
+               EgtDraw()
+
+               'Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+               'If Not EgtGetGroupObjs(nIdSaw) Then
+               '   m_CurrSelectedSawCurv = nIdSaw
+               '   m_CurrSelectedCurv = nIdMy
+               '   EgtSetMark(nIdSaw)
+               '   EgtSelectObj(nIdMy)
+               '   EgtDraw()
+               '   Exit While
+               'End If
+
+               Exit While
 
             End If
          End If
          nIdMy = EgtGetNextObjInSelWin()
       End While
+      If nIdMy = GDB_ID.NULL Then
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Select OUTLOOP")
+      End If
       Return
    End Sub
 
@@ -890,10 +978,103 @@ Public Class NestPageUC
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità registrazione
-      If Not m_bActive Or m_bRegister Then Return
+      If Not m_bActive Or m_bRegister Then
+         ' procedo solo sel il click è avvenuto con il tasto sinistro del mouse
+         If e.Button <> MouseButtons.Left Then Return
+         ' se aggiungo SpotReg e numero di Spot inferiore a quelli inseriti in Office
+         If AddPointRegBtn.IsChecked Then
+            If m_nCountSpotCUT < m_nCountSpot Then
+               ' Acquisisco punto da disegno
+               EgtUnProjectPoint(e.Location, m_ptPrev)
+               Dim ptRawMax As Point3d = m_b3Raw.Max()
+               m_ptPrev.z = ptRawMax.z
+               ' Inserisco un nuovo punto registrazione
+               CreateSpotRegistration(m_nRegGroupId, m_ptPrev, m_nCountSpotCUT + 1)
+               EgtDraw()
+               ' disattivo il comando di inserimento
+               AddPointRegBtn.IsChecked = False
+            Else
+               m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+               m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Max spot for reg: " & m_nCountSpot.ToString)
+            End If
+         ElseIf RemovePointRegBtn.IsChecked Then
+            ' Verifico se selezionato indicativo di pezzo
+            EgtSetObjFilterForSelWin(True, True, True, True, True)
+            Dim nSelect As Integer
+            EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelect)
+            Dim nSelId As Integer = EgtGetFirstObjInSelWin()
+            Dim sName As String = String.Empty
+            While nSelId <> GDB_ID.NULL
+               sName = String.Empty
+               EgtGetName(nSelId, sName)
+               If sName.StartsWith(SPOTREGCUT_) Then
+                  ' recupero recupero il centro della prima curva
+                  Dim nIdParent As Integer = EgtGetParent(nSelId)
+                  RemoveSpotRegistration(nIdParent)
+                  EgtDraw()
+                  EgtErase(nIdParent)
+                  RemovePointRegBtn.IsChecked = False
+                  ' Esco dal ciclo
+                  Exit While
+               End If
+               nSelId = EgtGetNextObjInSelWin()
+            End While
+         ElseIf ModPointRegBtn.IsChecked Then
+            ' Verifico se selezionato indicativo di pezzo
+            EgtSetObjFilterForSelWin(True, True, True, True, True)
+            Dim nSelect As Integer
+            EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelect)
+            Dim nSelId As Integer = EgtGetFirstObjInSelWin()
+            Dim sName As String = String.Empty
+            While nSelId <> GDB_ID.NULL
+               sName = String.Empty
+               EgtGetName(nSelId, sName)
+               If sName.StartsWith(SPOTREGCUT_) Then
+                  EgtDeselectAll()
+                  EgtResetMark(m_nCurrSpotRegId)
+                  ' recupero l'Id del gruppo di appartenenza
+                  Dim nIdParent As Integer = EgtGetParent(nSelId)
+                  EgtSelectGroupObjs(nIdParent)
+                  EgtSetMark(nIdParent)
+                  EgtDraw()
+                  ' Acquisisco punto da disegno
+                  EgtUnProjectPoint(e.Location, m_ptPrev)
+                  m_bDrag = True
+                  ' Salvo l'Id del punto SpotReg da spostare
+                  m_nCurrSpotRegId = nIdParent
+                  ' Esco dal ciclo
+                  Exit While
+               End If
+               nSelId = EgtGetNextObjInSelWin()
+            End While
+         ElseIf ActivatePointRegBtn.IsChecked Then
+            ' Verifico se selezionato indicativo di pezzo
+            EgtSetObjFilterForSelWin(True, True, True, True, True)
+            Dim nSelect As Integer
+            EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelect)
+            Dim nSelId As Integer = EgtGetFirstObjInSelWin()
+            Dim sName As String = String.Empty
+            While nSelId <> GDB_ID.NULL
+               sName = String.Empty
+               EgtGetName(nSelId, sName)
+               ' accetto qualsiasi punto di tipo SpotReg (sia da OFFICE che da CUT)
+               If sName.StartsWith(SPOTREG_) Or sName.StartsWith(SPOTREGCUT_) Then
+                  Dim nIdParent As Integer = EgtGetParent(nSelId)
+                  ActivateSpotRegistration(nIdParent)
+                  EgtDraw()
+                  ' Esco dal ciclo
+                  Exit While
+               End If
+               nSelId = EgtGetNextObjInSelWin()
+            End While
+         End If
+         ' Devo sempre uscire da questa condizione
+         Return
+      End If
+
       ' Si può selezionare solo con il tasto sinistro e se stato NULL
       If e.Button <> Windows.Forms.MouseButtons.Left Or
-         Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
+Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
          Return
       End If
 
@@ -902,7 +1083,6 @@ Public Class NestPageUC
          OnMyMouseDownSceneSelCurv(sender, e)
          Return
       End If
-
       m_bIsCounterLy = False
       ' se in modalità DragRettangle (deformazione delle componenti rettangolari)
       If m_bIsCheckedDragRettangle Then
@@ -963,7 +1143,6 @@ Public Class NestPageUC
                   End If
                End If
             End If
-
             If Not m_bIsCounterLy Then
                ' Se già selezionato o posizione oggetto incompatibile con flag posizione selezionati
                If nStat = GDB_ST.SEL Then
@@ -1022,6 +1201,10 @@ Public Class NestPageUC
                      EgtSetCurrPhase(nI)
                      EgtSetTableAreaOffset(TAB_OFFS, TAB_OFFS, TAB_OFFS, TAB_OFFS)
                   Next
+                  ' aggiorno posizionamento ventose per lavorazioni da sotto
+                  UpdateVacuumsForDrip()
+                  ' dichiaro tutto aggiornato
+                  m_CurrProjPage.SetOrderMachiningFlag()
                   EgtSetCurrPhase(1)
                   ' Rotazione
                   Dim dAngRot As Double = If(sOtherTab = SECOND_TAB, 180, -180)
@@ -1067,7 +1250,6 @@ Public Class NestPageUC
       m_bKeyLeftShiftPressed = m_bVerify
       m_vtTotMove = Vector3d.NULL()
    End Sub
-
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseMoveScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -1076,7 +1258,7 @@ Public Class NestPageUC
       ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
       If m_bDragToStart Then
          If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
-            Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
+Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
             Return
          End If
          m_bDragToStart = False
@@ -1087,6 +1269,19 @@ Public Class NestPageUC
          OnMyMouseMoveSawRettangle(sender, e)
          Return
       End If
+      If ModPointRegBtn.IsChecked Then
+         ' Ricavo il punto corrente in coordinate mondo
+         Dim ptCurr_ As Point3d
+         EgtUnProjectPoint(e.Location, ptCurr_)
+         ' Ricavo il vettore di movimento
+         Dim vtMove As Vector3d = ptCurr_ - m_ptPrev
+         MoveSpotRegistration(m_nCurrSpotRegId, vtMove)
+         ' Aggiorno il punto precedente
+         m_ptPrev = ptCurr_
+         ' Terminata esecuzione di drag
+         m_bDragging = False
+         Return
+      End If
 
       ' Determino cosa muovere
       Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
@@ -1650,6 +1845,10 @@ Public Class NestPageUC
             nRevPhase += 1
          End While
       End If
+      ' Muovo i punti SpotReg generati nel programma OFFICE
+      If bMoveOk Then
+         MoveAllSpotRegistration(vtMove)
+      End If
       ' Ripristino lo stato iniziale
       EgtSetCurrPhase(1)
       HideAllMachinings()
@@ -1909,12 +2108,160 @@ Public Class NestPageUC
          ' Dichiaro grezzo per punti
          EgtSetInfo(GetCurrentRaw(), KEY_RAWBYPOINTS, 1)
       End If
+      ' Ruoto i punti SpotReg disegnati in Office
+      If bMoveOk Then
+         RotateAllSpotRegistration(dAngDeg, ptCen)
+      End If
       ' Ripristino lo stato iniziale
       EgtSetCurrPhase(1)
       HideAllMachinings()
       Return bMoveOk
    End Function
 
+   Friend Function RotateAllRawParts(dAngDeg As Double, ptCen As Point3d, Optional bIsReg As Boolean = True) As Boolean
+      ' Recupero rotazione totale
+      Dim dRegRot As Double = GetRegistrationRotation()
+      ' Recupero il centro del grezzo iniziale per usarlo come centro della rotazione
+      'Dim ptCen As New Point3d
+      'GetRawCenter(ptCen)
+      ' Provo la rotazione
+      Dim bMoveOk As Boolean = True
+      Dim nPhase As Integer = 1
+      Dim nRawId As Integer = GDB_ID.NULL
+      While nPhase <= EgtGetPhaseCount()
+         EgtSetCurrPhase(nPhase)
+         nRawId = EgtGetFirstRawPart()
+         While nRawId <> GDB_ID.NULL
+            If EgtVerifyRawPartPhase(nRawId, nPhase) Then
+               ' Rotazione del centro come spostamento grezzo più rotazione grezzo attorno al suo centro
+               Dim ptRawCen As New Point3d
+               EgtGetRawPartCenter(nRawId, ptRawCen)
+               Dim ptMovCen As New Point3d(ptRawCen)
+               ptMovCen.Rotate(ptCen, Vector3d.Z_AX(), dAngDeg)
+               If Not EgtMoveRawPart(nRawId, ptMovCen - ptRawCen) Then
+                  bMoveOk = False
+                  Exit While
+               End If
+               If Not EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngDeg) Then
+                  EgtMoveRawPart(nRawId, -(ptMovCen - ptRawCen))
+                  bMoveOk = False
+                  Exit While
+               End If
+            End If
+            nRawId = EgtGetNextRawPart(nRawId)
+         End While
+         If Not bMoveOk Then Exit While
+         nPhase += 1
+      End While
+      ' Se rotazione impossibile, ripristino posizione dei grezzi già spostati
+      If Not bMoveOk Then
+         Dim nRevPhase As Integer = 1
+         Dim nRevRawId As Integer = GDB_ID.NULL
+         While nRevPhase <= nPhase
+            EgtSetCurrPhase(nRevPhase)
+            nRevRawId = EgtGetFirstRawPart()
+            While nRevRawId <> GDB_ID.NULL And (nRevPhase < nPhase Or nRevRawId <> nRawId)
+               If EgtVerifyRawPartPhase(nRevRawId, nRevPhase) Then
+                  ' Eseguo al contrario
+                  EgtRotateRawPart(nRevRawId, Vector3d.Z_AX(), -dAngDeg)
+                  Dim ptRawCen As New Point3d
+                  EgtGetRawPartCenter(nRevRawId, ptRawCen)
+                  Dim ptMovCen As New Point3d(ptRawCen)
+                  ptMovCen.Rotate(ptCen, Vector3d.Z_AX(), -dAngDeg)
+                  EgtMoveRawPart(nRevRawId, (ptMovCen - ptRawCen))
+               End If
+               nRevRawId = EgtGetNextRawPart(nRevRawId)
+            End While
+            nRevPhase += 1
+         End While
+         ' Altrimenti eseguo sistemazioni
+      Else
+         ' Origine della tavola
+         Dim ptOri As Point3d
+         EgtGetTableRef(1, ptOri)
+         ' Annullo rotazioni dei grezzi e le rifaccio sulle parti componenti
+         Dim nRevPhase As Integer = 1
+         Dim nRevRawId As Integer = GDB_ID.NULL
+         While nRevPhase <= EgtGetPhaseCount()
+            EgtSetCurrPhase(nRevPhase)
+            nRevRawId = EgtGetFirstRawPart()
+            While nRevRawId <> GDB_ID.NULL
+               If EgtVerifyRawPartPhase(nRevRawId, nRevPhase) Then
+                  ' Eseguo al contrario
+                  EgtRotateRawPart(nRevRawId, Vector3d.Z_AX(), -dAngDeg)
+                  Dim ptRawCen As New Point3d
+                  EgtGetRawPartCenter(nRevRawId, ptRawCen)
+                  Dim ptMovCen As New Point3d(ptRawCen)
+                  ptMovCen.Rotate(ptCen, Vector3d.Z_AX(), -dAngDeg)
+                  EgtMoveRawPart(nRevRawId, (ptMovCen - ptRawCen))
+                  ' Rifaccio sugli oggetti contenuti nel grezzo
+                  Dim nId As Integer = EgtGetFirstInGroup(nRevRawId)
+                  While nId <> GDB_ID.NULL
+                     EgtRotate(nId, ptCen, Vector3d.Z_AX(), dAngDeg, GDB_RT.GLOB)
+                     nId = EgtGetNext(nId)
+                  End While
+                  ' Imposto posizione esatta del grezzo dopo rotazione
+                  Dim b3Raw As New BBox3d
+                  EgtGetRawPartBBox(nRevRawId, b3Raw)
+                  EgtMoveToCornerRawPart(nRevRawId, (b3Raw.Min() - ptOri) + Point3d.ORIG(), MCH_CR.BL)
+               End If
+               nRevRawId = EgtGetNextRawPart(nRevRawId)
+            End While
+            nRevPhase += 1
+         End While
+         ' Ruoto opportunamente anche i dati di movimento
+         Dim nOpeId As Integer = EgtGetFirstActiveOperation()
+         While nOpeId <> GDB_ID.NULL
+            If EgtGetOperationType(nOpeId) = MCH_OY.DISP Then
+               ' Recupero i gruppi con i dati
+               Dim nRpmId As Integer = EgtGetFirstNameInGroup(nOpeId, "Rpm*")
+               While nRpmId <> GDB_ID.NULL
+                  ' Recupero le informazioni
+                  Dim vtRawMove As New Vector3d
+                  If EgtGetInfo(nRpmId, "Mv", vtRawMove) Then
+                     vtRawMove.Rotate(Vector3d.Z_AX(), dAngDeg)
+                     EgtSetInfo(nRpmId, "Mv", vtRawMove)
+                  End If
+                  Dim vtDelta As New Vector3d
+                  If EgtGetInfo(nRpmId, "Dt", vtDelta) Then
+                     vtDelta.Rotate(Vector3d.Z_AX(), dAngDeg)
+                     EgtSetInfo(nRpmId, "Dt", vtDelta)
+                  End If
+                  Dim dAngRotDeg As Double = 0
+                  If EgtGetInfo(nRpmId, "Ad", dAngRotDeg) Then
+                     EgtSetInfo(nRpmId, "Ad", dAngRotDeg + dAngDeg)
+                  End If
+                  ' Cerco un altro gruppo
+                  nRpmId = EgtGetNextName(nRpmId, "Rpm*")
+               End While
+            End If
+            nOpeId = EgtGetNextActiveOperation(nOpeId)
+         End While
+         ' Se non è registrazione, ruoto anche l'eventuale foto della lastra
+         'If Not bIsReg Then
+         '   Dim nPhotoId = m_CurrProjPage.GetPhoto()
+         '   If nPhotoId <> GDB_ID.NULL then EgtRotatePhoto(nPhotoId, ptCen, Vector3d.Z_AX(), dAngDeg)
+         'End If
+         ' Aggiorno rotazione totale
+         If bIsReg Then
+            SetRegistrationRotation(dRegRot + dAngDeg)
+         Else
+            SetRegistrationRotation(0)
+         End If
+         ' Dichiaro grezzo per punti
+         EgtSetInfo(GetCurrentRaw(), KEY_RAWBYPOINTS, 1)
+      End If
+      ' Ruoto i punti SpotReg disegnati in Office
+      If bMoveOk Then
+         RotateAllSpotRegistration(dAngDeg, ptCen)
+      End If
+      ' Ripristino lo stato iniziale
+      EgtSetCurrPhase(1)
+      HideAllMachinings()
+      Return bMoveOk
+   End Function
+
+
    Private Sub InsertPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertPartBtn.Click
       ' Se inserimento automatico
       If GetPrivateProfileInt(S_NEST, K_AUTOMATICOPTIMIZE, 0, m_MainWindow.GetIniFile()) <> 0 And
@@ -2482,8 +2829,11 @@ Public Class NestPageUC
       Const STORE_LARGH As Double = 6000
       Const STORE_DIST As Double = 200
       Const STORE_OFFS As Double = 20 + 40 + 20
-      Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (STORE_LARGH - b3Tab.DimX())
-      Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + STORE_LARGH, b3Tab.Min().y - STORE_DIST, STORE_OFFS, False)
+      Dim dStoreLarg As Double = GetPrivateProfileDouble("Store", "StoreLargh", STORE_LARGH, m_MainWindow.GetMachIniFile())
+      Dim dStoreDist As Double = GetPrivateProfileDouble("Store", "StoreDist", STORE_DIST, m_MainWindow.GetMachIniFile())
+      Dim dStoreOffs As Double = GetPrivateProfileDouble("Store", "StoreOffs", STORE_OFFS, m_MainWindow.GetMachIniFile())
+      Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (dStoreLarg - b3Tab.DimX())
+      Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + dStoreLarg, b3Tab.Min().y - dStoreDist, dStoreOffs, False)
    End Function
 
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
@@ -2755,7 +3105,10 @@ Public Class NestPageUC
          Else
             m_dRegStep = Math.Max(dVal, 2 * EPS_SMALL)
          End If
-         WritePrivateProfileString(S_NEST, K_STEP, StepMoveTxBx.Text, m_MainWindow.GetIniFile())
+         Dim dCurrVal As Double = 0
+         StringToLen(StepMoveTxBx.Text, dCurrVal)
+         DoubleToString(dCurrVal, 2)
+         WritePrivateProfileString(S_NEST, K_STEP, DoubleToString(dCurrVal, 2), m_MainWindow.GetIniFile())
       End If
    End Sub
 
@@ -2852,6 +3205,427 @@ Public Class NestPageUC
       Return True
    End Function
 
+#Region "SPOT REG"
+
+   ' Layer per crocette dei punti REG (creato in Office)
+   Public m_nRegGroupId As Integer = GDB_ID.NULL
+   ' Numero di spot inseriti nel grezzo corrente (da Office)
+   Private m_nCountSpot As Integer = 0
+   ' Gruppo Spot attualmente selezionato
+   Private m_nCurrSpotRegId As Integer = GDB_ID.NULL
+   ' Nome info nuomero Spot (da Office)
+   Private Const COUNTSPOT As String = "CountSpot"
+   ' Nome gruppo
+   Private Const REG As String = "Reg"
+   ' Nome del gruppo di ogno Spot (da Office)
+   Private Const SPOTREG_ As String = "SpotReg_"
+   Private Const RADSPOT As Double = 20
+
+   ' numero di Spot inseriti (da Cut)
+   Private m_nCountSpotCUT As Integer = 0
+   ' Nome del gruppo di ogno Spot (da Cut)
+   Private Const SPOTREGCUT_ As String = "SpotRegCUT_"
+   ' Nome info nuomero Spot (da Office)
+   Private Const COUNTSPOTCUT As String = "CountSpotCUT"
+   ' Nome della Info per indicare se il punto è da usare
+   Private Const ACTIVATESPOTCUT As String = "ActivateSpotCut"
+
+   Private Sub AddPointReg_Click() Handles AddPointRegBtn.Click
+      DeselectCurSpotReg()
+      ModPointRegBtn.IsChecked = False
+      RemovePointRegBtn.IsChecked = False
+      ActivatePointRegBtn.IsChecked = False
+   End Sub
+
+   Private Sub ModPointReg_Click() Handles ModPointRegBtn.Click
+      ' Deseleziono lo Spotreg selezionato
+      DeselectCurSpotReg()
+      AddPointRegBtn.IsChecked = False
+      RemovePointRegBtn.IsChecked = False
+      ActivatePointRegBtn.IsChecked = False
+   End Sub
+
+   Private Sub RemovePointReg_Click() Handles RemovePointRegBtn.Click
+      DeselectCurSpotReg()
+      ModPointRegBtn.IsChecked = False
+      AddPointRegBtn.IsChecked = False
+      ActivatePointRegBtn.IsChecked = False
+   End Sub
+
+   Private Sub AdjustPointReg_Click() Handles AdjustPointRegBtn.Click
+      PointRegCheckedOff()
+      AdjustRawWithSpotReg()
+   End Sub
+
+   Private Sub ActivatePointRegBtn_Click() Handles ActivatePointRegBtn.Click
+      DeselectCurSpotReg()
+      AddPointRegBtn.IsChecked = False
+      ModPointRegBtn.IsChecked = False
+      RemovePointRegBtn.IsChecked = False
+   End Sub
+
+   Private Sub DeselectCurSpotReg()
+      EgtDeselectAll()
+      If m_nCurrSpotRegId <> GDB_ID.NULL Then
+         EgtResetMark(m_nCurrSpotRegId)
+         m_nCurrSpotRegId = GDB_ID.NULL
+         EgtDraw()
+      End If
+   End Sub
+
+   ' disabilito contemporaneamente tutti i comandi per la gestione punti SpotReg
+   Public Sub PointRegCheckedOff()
+      DeselectCurSpotReg()
+      AddPointRegBtn.IsChecked = False
+      ModPointRegBtn.IsChecked = False
+      RemovePointRegBtn.IsChecked = False
+      ActivatePointRegBtn.IsChecked = False
+   End Sub
+
+   ' riceve l'ID del gruppo da muovere
+   Private Function MoveSpotRegistration(nIdGroup As Integer, vtMove As Vector3d) As Boolean
+      If nIdGroup = GDB_ID.NULL Then Return False
+      ' Non ci deve essere movimento in Z
+      vtMove.z = 0
+      ' Recupero il cercio di riferimento
+      Dim nArcId As Integer = EgtGetFirstInGroup(nIdGroup)
+      Dim b3Crv As New BBox3d
+      EgtGetBBoxGlob(nArcId, GDB_BB.STANDARD, b3Crv)
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim m_ptTableMin As Point3d = ptMin
+         Dim m_dTableLength As Double = ptMax.x - ptMin.x
+         Dim m_dTableWidth As Double = ptMax.y - ptMin.y
+         b3Crv.Move(vtMove)
+         If b3Crv.Min().x < m_ptTableMin.x + 10 * EPS_SMALL Then
+            vtMove.x += m_ptTableMin.x + 10 * EPS_SMALL - b3Crv.Min().x
+         ElseIf b3Crv.Max().x > m_ptTableMin.x + m_dTableLength + 10 * EPS_SMALL Then
+            vtMove.x += m_ptTableMin.x + m_dTableLength - 10 * EPS_SMALL - b3Crv.Max().x
+         End If
+         If b3Crv.Min().y < m_ptTableMin.y + 10 * EPS_SMALL Then
+            vtMove.y += m_ptTableMin.y + 10 * EPS_SMALL - b3Crv.Min().y
+         ElseIf b3Crv.Max().y > m_ptTableMin.y + m_dTableWidth + 10 * EPS_SMALL Then
+            vtMove.y += m_ptTableMin.y + m_dTableWidth - 10 * EPS_SMALL - b3Crv.Max().y
+         End If
+         ' muovo il gruppo
+         EgtMove(nIdGroup, vtMove)
+         EgtDraw()
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' Muovo solo gli elementi SpotReg creati nel programma OFFICE
+   Private Sub MoveAllSpotRegistration(vtMove As Vector3d, Optional bOnlyOfficeSpot As Boolean = True)
+      Dim nId As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      While nId <> GDB_ID.NULL
+         Dim sName As String = String.Empty
+         EgtGetName(nId, sName)
+         If Not sName.Contains("CUT") Or Not bOnlyOfficeSpot Then
+            EgtMove(nId, vtMove)
+         End If
+         nId = EgtGetNext(nId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' Riposiziono i punti SpotReg (tutti) in funzione dell'altezza del grezzo
+   Public Sub UpdateSpotRegistration()
+      Dim ptCentArc As Point3d
+      If m_nRegGroupId <> GDB_ID.NULL Then Return
+      Dim nId As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      Dim sNameEnt As String = String.Empty
+      Dim sName As String = String.Empty
+      EgtGetName(nId, sName)
+      If sName.Contains("CUT") Then
+         sNameEnt = SPOTREGCUT_ & "Arc"
+      Else
+         sNameEnt = SPOTREG_ & "Arc"
+      End If
+      Dim nIdArc As Integer = EgtGetFirstNameInGroup(nId, sNameEnt)
+      If Not EgtCenterPoint(nIdArc, GDB_ID.ROOT, ptCentArc) Then
+         Return
+      End If
+      Dim dOffsetZ As Double = m_b3Raw.Max().z - ptCentArc.z
+      If Math.Abs(dOffsetZ) > 0.1 Then
+         MoveAllSpotRegistration(New Vector3d(0, 0, dOffsetZ + 0.1), False)
+      End If
+   End Sub
+
+   ' Ruoto solo gli elementi SpotReg creati nel programma OFFICE
+   Private Sub RotateAllSpotRegistration(dAngRot As Double, ptCen As Point3d)
+      Dim nId As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      While nId <> GDB_ID.NULL
+         Dim sName As String = String.Empty
+         EgtGetName(nId, sName)
+         If Not sName.Contains("CUT") Then
+            EgtRotate(nId, ptCen, Vector3d.Z_AX, dAngRot)
+         End If
+         nId = EgtGetNext(nId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' Per ogni SpotReg di OFFICE viene generato (nella stessa posizione) uno SpotRegCUT
+   Private Function InsertSpotRegistration() As Boolean
+      ' recupero l'elenco non ordinato degli Id dei punti SpotReg (da Office)
+      Dim SpotRegList As New List(Of Integer)
+      Dim nId As Integer = GDB_ID.NULL
+      ' Creo la lista ordinata dei punti SpotReg (da OFFICE)
+      For nIndexSpot As Integer = 1 To m_nCountSpot
+         nId = EgtGetFirstNameInGroup(m_nRegGroupId, SPOTREG_ & nIndexSpot.ToString)
+         SpotRegList.Add(nId)
+      Next
+      ' Creo i punti SpotRegCUT sovrapposti a quelli inseriti in OFFICE
+      Dim bOk As Boolean = True
+      For nIndex As Integer = 0 To SpotRegList.Count - 1
+         Dim ptCent As Point3d
+         GetCenterSpotReg(SpotRegList, SPOTREG_ & "Arc", nIndex + 1, ptCent)
+         bOk = bOk And CreateSpotRegistration(m_nRegGroupId, ptCent, nIndex + 1)
+      Next
+      Return bOk
+   End Function
+
+   ' Creo il punto nel gruppo "Reg/SpotRegCUT_"
+   Private Function CreateSpotRegistration(nLayerIdReg As Integer, ptP As Point3d, nIndexSpot As Integer) As Boolean
+      ' creo uno specifico layer per ogni spot (definito da una croce inscritta in un cerchio)
+      Dim nIdSpotLay As Integer = EgtCreateGroup(nLayerIdReg)
+      ' Aggiungo cerchio
+      Dim nCircId As Integer = EgtCreateCircle(nIdSpotLay, ptP, RADSPOT)
+      ' Inserisco una croce all'interno del 
+      Dim nLineVId As Integer = EgtCreateLinePVL(nIdSpotLay, ptP, Vector3d.Y_AX, RADSPOT)
+      EgtExtendCurveStartByLen(nLineVId, RADSPOT)
+      Dim nLineHId As Integer = EgtCreateLinePVL(nIdSpotLay, ptP, Vector3d.X_AX, RADSPOT)
+      EgtExtendCurveStartByLen(nLineHId, RADSPOT)
+      Dim nTextId As Integer = EgtCreateText(nIdSpotLay, ptP + New Vector3d(1, 1, 0), nIndexSpot.ToString, 10)
+      ' coloro gli oggetti appena creati ed assegno il nome
+      Dim bOk As Boolean = EgtSetColor(nCircId, New Color3d(0, 255, 0))
+      bOk = bOk And EgtSetName(nCircId, SPOTREGCUT_ & "Arc")
+      bOk = bOk And EgtSetColor(nLineVId, New Color3d(0, 255, 0))
+      bOk = bOk And EgtSetName(nLineVId, SPOTREGCUT_ & "LineV")
+      bOk = bOk And EgtSetColor(nLineHId, New Color3d(0, 255, 0))
+      bOk = bOk And EgtSetName(nLineHId, SPOTREGCUT_ & "LineH")
+      bOk = bOk And EgtSetColor(nTextId, New Color3d(255, 0, 0))
+      bOk = bOk And EgtSetName(nTextId, SPOTREGCUT_ & "Text")
+      ' assegno il nome del gruppo corrente
+      bOk = bOk And EgtSetName(nIdSpotLay, SPOTREGCUT_ & nIndexSpot.ToString)
+      If bOk Then
+         ' Aggiorno il contatore degli Spot
+         EgtSetInfo(nLayerIdReg, COUNTSPOTCUT, nIndexSpot)
+         m_nCountSpotCUT = nIndexSpot
+      End If
+      Return bOk
+   End Function
+
+   ' Elimino il punto nel gruppo "Reg/SpotRegCUT_"
+   Private Function RemoveSpotRegistration(nSpotRegId As Integer) As Boolean
+      Dim nIndSpotReg As Integer = GetIndexGroupSpotReg(nSpotRegId)
+      If Not EgtErase(nSpotRegId) Then Return False
+      ' faccio scorrere tutti i gruppi ed eventualmente li rinomino
+      Dim n_IdSR As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      m_nCountSpotCUT -= 1
+      EgtSetInfo(m_nRegGroupId, COUNTSPOTCUT, m_nCountSpotCUT)
+      While n_IdSR <> GDB_ID.NULL
+         Dim sName As String = String.Empty
+         EgtGetName(n_IdSR, sName)
+         If sName.Contains("CUT") Then
+            Dim nCurrIndSpotReg As Integer = GetIndexGroupSpotReg(n_IdSR)
+            If nCurrIndSpotReg > nIndSpotReg Then
+               ' Recupero il testo
+               Dim nIdtext As Integer = EgtGetFirstNameInGroup(n_IdSR, SPOTREGCUT_ & "Text")
+               nCurrIndSpotReg -= 1
+               EgtModifyText(nIdtext, nCurrIndSpotReg.ToString)
+               EgtSetName(n_IdSR, SPOTREGCUT_ & nCurrIndSpotReg.ToString)
+            End If
+         End If
+         n_IdSR = EgtGetNext(n_IdSR)
+
+      End While
+      EgtDraw()
+      Return True
+   End Function
+
+   ' Cambio lo stato dello SpotReg (sia di OFFICE che di CUT)
+   Private Function ActivateSpotRegistration(nSpotRegId As Integer) As Boolean
+      Dim nIndexSpot As Integer = GetIndexGroupSpotReg(nSpotRegId)
+      Dim nParentId As Integer = EgtGetParent(nSpotRegId)
+      Dim nInfo As Integer = 0
+      Dim bOk As Boolean = True
+      If Not EgtGetInfo(nSpotRegId, ACTIVATESPOTCUT, nInfo) Then
+         ' 1: Attivo, 0: Disbilitato
+         nInfo = 1
+      End If
+      If nInfo = 1 Then
+         ' inserisco una Info sullo SpotRegCUT che indica che è disattivo
+         nSpotRegId = EgtGetFirstNameInGroup(nParentId, SPOTREGCUT_ & nIndexSpot.ToString)
+         bOk = EgtSetInfo(nSpotRegId, ACTIVATESPOTCUT, 0)
+         Dim nEntId As Integer = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "Arc")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "LineV")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "LineH")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "Text")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 255, 0))
+         ' inserisco una Info sullo SpotReg (OFFICE) che indica che è disattivo
+         nSpotRegId = EgtGetFirstNameInGroup(nParentId, SPOTREG_ & nIndexSpot.ToString)
+         bOk = EgtSetInfo(nSpotRegId, ACTIVATESPOTCUT, 0)
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "Arc")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 255))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "LineV")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 255))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "LineH")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 255))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "Text")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 0))
+      Else
+         ' inserisco una Info sul pezzo che indica che è attivo
+         nSpotRegId = EgtGetFirstNameInGroup(nParentId, SPOTREGCUT_ & nIndexSpot.ToString)
+         bOk = EgtSetInfo(nSpotRegId, ACTIVATESPOTCUT, 1)
+         Dim nEntId As Integer = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "Arc")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 255, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "LineV")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 255, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "LineH")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 255, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREGCUT_ & "Text")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 0, 0))
+         ' inserisco una Info sullo SpotReg (OFFICE) che indica che è disattivo
+         nSpotRegId = EgtGetFirstNameInGroup(nParentId, SPOTREG_ & nIndexSpot.ToString)
+         bOk = EgtSetInfo(nSpotRegId, ACTIVATESPOTCUT, 1)
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "Arc")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "LineV")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "LineH")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(0, 0, 0))
+         nEntId = EgtGetFirstNameInGroup(nSpotRegId, SPOTREG_ & "Text")
+         bOk = bOk And EgtSetColor(nEntId, New Color3d(255, 0, 0))
+      End If
+      Return bOk
+   End Function
+
+   ' Restituisce l'indice dello "SpotReg_" oppure "SpotRegCUT_"
+   Private Function GetIndexGroupSpotReg(nSpotRegId As Integer) As Integer
+      Dim sNameParent As String = String.Empty
+      EgtGetName(nSpotRegId, sNameParent)
+      ' Ricavo l'indice dal nome
+      Dim sItems As String() = sNameParent.Split("_"c)
+      Dim nCurrIndex As Integer = 0
+      If sItems.Count = 2 Then
+         If Not Integer.TryParse(sItems(1), nCurrIndex) Then
+            nCurrIndex = -1
+         End If
+      End If
+      Return nCurrIndex
+   End Function
+
+   ' Calcola gli spostamenti del grezzo per posizionare i punti di SpotReg
+   Private Function AdjustRawWithSpotReg() As Boolean
+      ' Verifico che almeno un punto sia stato inserito
+      If m_nCountSpotCUT < 1 Then
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Insert one spot reg to start.")
+      End If
+
+      ' recupero l'elenco non ordinato degli Id dei punti SpotReg (da Office)
+      Dim SpotRegList As New List(Of Integer)
+      Dim SpotRegCUTList As New List(Of Integer)
+      Dim nId As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      ' Creo la lista ordinata dei punti
+      For nIndexSpot As Integer = 1 To m_nCountSpotCUT
+         nId = EgtGetFirstNameInGroup(m_nRegGroupId, SPOTREGCUT_ & nIndexSpot.ToString)
+         Dim nActivate As Integer = 0
+         If Not EgtGetInfo(nId, ACTIVATESPOTCUT, nActivate) Then
+            nActivate = 1
+         End If
+         If nId <> GDB_ID.NULL And nActivate = 1 Then
+            SpotRegCUTList.Add(nId)
+            nId = EgtGetFirstNameInGroup(m_nRegGroupId, SPOTREG_ & nIndexSpot.ToString)
+            SpotRegList.Add(nId)
+         End If
+      Next
+
+      ' Carico la lista dei centri
+      Dim ptCentCUTList As New List(Of Point3d)
+      Dim ptCentLIst As New List(Of Point3d)
+      If Not GetAllCenterSpotReg(SpotRegCUTList, SpotRegList, ptCentCUTList, ptCentLIst) Then Return False
+
+      ' Eseguo il primo posizionamento di massima
+      Dim vtMoveStart As Vector3d = ptCentCUTList(0) - ptCentLIst(0)
+      Dim dAngRotSum As Double = 0.0
+      Dim dScaleSum As Double = 0.0
+      For nIndex As Integer = 1 To ptCentCUTList.Count - 1
+         Dim vtDirCUT As Vector3d = ptCentCUTList(nIndex) - ptCentCUTList(0)
+         Dim vtDir As Vector3d = ptCentLIst(nIndex) - ptCentLIst(0)
+         Dim dLenCUT, dLen, dAngVCUT, dAngV, dAngHCUT, dAngH As Double
+         vtDirCUT.ToSpherical(dLenCUT, dAngVCUT, dAngHCUT)
+         vtDir.ToSpherical(dLen, dAngV, dAngH)
+         dScaleSum += Math.Abs(dLenCUT - dLen) / dLenCUT
+         dAngRotSum += dAngHCUT - dAngH
+      Next
+      vtMoveStart.z = 0
+      ' Determino la deformazione media
+      Dim dScaleAvarage As Double = 1 - dScaleSum / (ptCentCUTList.Count - 1)
+      MoveAllRawParts(vtMoveStart)
+      ' Ruoto del valor medio delle differenze angolari
+      Dim dAngAvarage As Double = dAngRotSum / (ptCentCUTList.Count - 1)
+      RotateAllRawParts(dAngAvarage, ptCentCUTList(0))
+      Dim sCurrINdexSpot As String = GetIndexGroupSpotReg(SpotRegCUTList(0)).ToString
+      EgtOutLog(" → REG Adjustment datas :")
+      EgtOutLog("   → move SpotReg_" & sCurrINdexSpot & " : " & vtMoveStart.x.ToString & ", " & vtMoveStart.y.ToString)
+      EgtOutLog("   → average rotation around SpotRegCUT_" & sCurrINdexSpot & " : " & dAngAvarage.ToString)
+      EgtOutLog("   → average scale deformation : " & dScaleAvarage.ToString)
+
+      ' Correggo lo spostamento in funzione della deformazione misurata
+      Dim vtMoveSum As Vector3d = New Vector3d(0, 0, 0)
+      GetAllCenterSpotReg(SpotRegCUTList, SpotRegList, ptCentCUTList, ptCentLIst)
+      For nIndex As Integer = 1 To ptCentCUTList.Count - 1
+         vtMoveSum += ptCentCUTList(nIndex) - ptCentLIst(nIndex)
+      Next
+      vtMoveSum.z = 0
+      vtMoveSum = vtMoveSum / (ptCentCUTList.Count - 1)
+      MoveAllRawParts(vtMoveSum * dScaleAvarage / 2)
+      EgtDraw()
+
+      Return True
+   End Function
+
+   Private Function GetAllCenterSpotReg(SpotRegCUTList As List(Of Integer), SpotRegList As List(Of Integer),
+                                 ByRef ptCentCUTList As List(Of Point3d), ByRef ptCentLIst As List(Of Point3d)) As Boolean
+      ptCentCUTList.Clear()
+      ptCentLIst.Clear()
+      For nIndex As Integer = 0 To m_nCountSpotCUT
+         Dim ptCenCUT As Point3d
+         Dim ptCent As Point3d
+         If GetCenterSpotReg(SpotRegCUTList, SPOTREGCUT_ & "Arc", nIndex + 1, ptCenCUT) Then
+            ptCentCUTList.Add(ptCenCUT)
+            GetCenterSpotReg(SpotRegList, SPOTREG_ & "Arc", nIndex + 1, ptCent)
+            ptCentLIst.Add(ptCent)
+         End If
+      Next
+      If ptCentCUTList.Count > 0 AndAlso ptCentCUTList.Count = ptCentLIst.Count Then
+         Return True
+      Else
+         Return False
+      End If
+   End Function
+
+   ' Data la lista di punti Spot e l'indice dello spot da ricercare restituisce il centro del punto indicato
+   Private Function GetCenterSpotReg(ListSR As List(Of Integer), sName As String, nIndex As Integer, ByRef ptCentArc As Point3d) As Boolean
+      For Each ItemSR As Integer In ListSR
+         If GetIndexGroupSpotReg(ItemSR) = nIndex Then
+            Dim nIdArc As Integer = EgtGetFirstNameInGroup(ItemSR, sName)
+            If EgtCenterPoint(nIdArc, GDB_ID.ROOT, ptCentArc) Then
+               Return True
+            End If
+         End If
+      Next
+      Return False
+   End Function
+
+#End Region
+
 End Class
 
 

CadCuts/SplitAuto.vb

@@ -1,4 +1,5 @@
-Imports System.Windows.Forms.Integration
+Imports System.Net
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 
 Public Module SplitAuto
@@ -37,6 +38,8 @@ Public Module SplitAuto
       Public m_dStartFreeLen As Double
       Public m_dEndFreeLen As Double
       Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -110,15 +113,22 @@ Public Module SplitAuto
                      EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                      If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                      Mach.m_nEntId = nEntId
+                     EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
                   End If
                   ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
+                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
                      Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
                      Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
+                     Dim bIn As Boolean = False
+                     Dim bOut As Boolean = False
+                     CanExtendSides(Mach, bIn, bOut)
+                     Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+                     Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
+                     If nRes = 0 Then
+                        EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+                     End If
                   End If
                   ' se trasformabile in taglio di separazione, verifico se lo è
                   If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
@@ -167,6 +177,26 @@ Public Module SplitAuto
       Return True
    End Function
 
+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    ' calcolo il numero di tipi di lavorazioni
    Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
@@ -795,28 +825,36 @@ Public Module SplitAuto
 
    Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                              vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim vtMove2 As Vector3d = -vtMove
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
       Dim rmData As New RawMoveData
-      If PutVacuumCupsOnRaw(vNewRaws(1), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
+      Dim vtMove2 As Vector3d = -vtMove
+
+      VacuumCups.ResetHeadName()
+      Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
          rmData.m_vtRawMove = vtMove
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      ElseIf PutVacuumCupsOnRaw(vNewRaws(0), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
+      End If
+
+      VacuumCups.ResetHeadName()
+      Dim bPut2Vacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If Not bPut2Vacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If bPut2Vacuum AndAlso SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
          rmData.m_vtRawMove = vtMove2
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      Else
-         Return False
       End If
+
+      Return False
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
       ' Spostamento originale
-      Dim vtOriMove As New Vector3d( vtMove)
+      Dim vtOriMove As New Vector3d(vtMove)
       ' Livello di movimento
-      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
       Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
       If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
@@ -851,7 +889,7 @@ Public Module SplitAuto
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
             vtMove += 0.5 * vtOriMove
             nMove += 1
-            If nMoveLevel = nMove Then return True
+            If nMoveLevel = nMove Then Return True
          Else
             EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If

CadCuts/SplitPageUC.xaml.vb

@@ -61,6 +61,9 @@ Public Class SplitPageUC
    ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
    Private m_StartEndModifyOnIntCorner As Boolean = False
 
+   Private m_IsCtrlKeyDown As Boolean = False
+   Private m_IsShiftKeyDown As Boolean = False
+
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
       ' Collego lista di oggetti a ListBox
@@ -343,7 +346,6 @@ Public Class SplitPageUC
          EgtTrimCurveEndAtLen(nIdBridge, dLen - 10 * EPS_SMALL)
          EgtTrimCurveStartAtLen(nIdBridge, 10 * EPS_SMALL)
       End If
-      ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
       Dim nIdPart As Integer = GDB_ID.NULL
       nIdPart = EgtGetFirstPartInRawPart(m_CurrProjPage.m_nRawId)
       While nIdPart <> GDB_ID.NULL
@@ -351,7 +353,6 @@ Public Class SplitPageUC
          Dim nIdSurf As Integer = EgtGetFirstInGroup(nIdRegion)
          While nIdSurf <> GDB_ID.NULL
             If EgtGetType(nIdSurf) = GDB_TY.SRF_FRGN Then
-               ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
                ' se la linea bridge interseca la superficie allora restitusco false
                If EgtCurveWithRegionClassify(nIdBridge, nIdSurf) <> CREGC.OUT Then
                   EgtExtendCurveStartByLen(nIdBridge, 10 * EPS_SMALL)
@@ -455,6 +456,10 @@ Public Class SplitPageUC
 
 #End Region    ' Bridge
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene_DoubleClick
+      OnOffCut()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse m_bShow Then Return
@@ -597,6 +602,7 @@ Public Class SplitPageUC
          Dim dUsal As Double
          ' ----------------------- REPEAT -----------------------
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanStartAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -630,6 +636,7 @@ Public Class SplitPageUC
          Dim dUeal As Double
          dDelta = -dDelta
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanEndAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
@@ -733,6 +740,11 @@ Public Class SplitPageUC
       EgtDraw()
    End Sub
 
+   Private Sub MachiningLsBx_MouseDoubleClick(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.MouseDoubleClick
+      If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
+      OnOffCut()
+   End Sub
+
    Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
       MoveItem(-1)
    End Sub
@@ -916,11 +928,31 @@ Public Class SplitPageUC
       EnableButtons()
    End Sub
 
-   ' ERRORE: questo evento non è eseguito!
-   Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
-      If e.Key = Key.Escape Then
-         ' se sono in fase di creazione di un ponticello interrompo
-         DeselectWJBridgesPart()
+   '' DA FARE: quando seleziono Esc devo togliere deselezionare tutte le enità!
+   'Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs) Handles Me.KeyDown
+   '   If e.Key = Key.Escape Then
+   '      ' se sono in fase di creazione di un ponticello interrompo
+   '      DeselectWJBridgesPart()
+   '      EgtDeselectAll()
+   '      RemoveMarkAndNumbers()
+   '   End If
+   'End Sub
+
+   Private Sub MachiningLsBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyDown
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = True
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = True
+      End If
+   End Sub
+
+   Private Sub MachiningLsBx_KeyUp(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyUp
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = False
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = False
       End If
    End Sub
 
@@ -1127,37 +1159,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLiPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-            If nLiPrev = MCH_SAW_LI.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ElseIf nLiPrev = MCH_SAW_LI.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLiPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+               If nLiPrev = MCH_SAW_LI.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ElseIf nLiPrev = MCH_SAW_LI.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1195,24 +1236,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenStartBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLiPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-         If nLiPrev = MCH_SAW_LI.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLiPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+            If nLiPrev = MCH_SAW_LI.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1228,37 +1278,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLoPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-            If nLoPrev = MCH_SAW_LO.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ElseIf nLoPrev = MCH_SAW_LO.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLoPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+               If nLoPrev = MCH_SAW_LO.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ElseIf nLoPrev = MCH_SAW_LO.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1296,24 +1355,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenEndBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLoPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-         If nLoPrev = MCH_SAW_LO.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLoPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+            If nLoPrev = MCH_SAW_LO.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1391,6 +1459,12 @@ Public Class SplitPageUC
          ' Se taglio con lama
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dPrevAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
+
+            If Not m_MachiningList(nI).m_bCanStartAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -1566,6 +1640,11 @@ Public Class SplitPageUC
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dNextAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
 
+            If Not m_MachiningList(nI).m_bCanEndAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
 
@@ -1700,7 +1779,7 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
-         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
+         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING And m_MachiningList(nI).m_nType <> MCH_OY.WATERJETTING Then Continue For
          ' Non si possono invertire i tagli di lama inclinati
          If Math.Abs(m_MachiningList(nI).m_dSideAng) > 0.1 Then Continue For
          ' Se abilitata inversione automatica e quindi non invertito
@@ -1714,6 +1793,7 @@ Public Class SplitPageUC
                ResetEnableInvert(m_MachiningList(nI).m_nEntId)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' se altrimenti disabilitata inversione automatica e invertito
@@ -1725,6 +1805,7 @@ Public Class SplitPageUC
                SwapStartEndData(nI)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' altrimenti disabilitata inversione automatica e non invertito
@@ -1782,7 +1863,7 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_bShow Then
          Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
          ' recupero l'operazione successiva
@@ -2091,6 +2172,33 @@ Public Class SplitPageUC
 
    End Sub
 
+   Private Sub OnOffCut()
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+         ' Imposto flag di modifica
+         m_bModified = True
+         ' recupero l'elenco degli elementi selezionati
+         Dim ItemList As New List(Of NameIdLsBxItem)
+         For Each Item As NameIdLsBxItem In MachiningLsBx.SelectedItems
+            ItemList.Add(Item)
+         Next
+         VerifyHomogenousMachining(ItemList)
+         ' Abilitazione bottone Next
+         EnableButtons()
+      End If
+   End Sub
+
    Private Sub VerifyHomogenousMachining(ItemList As List(Of NameIdLsBxItem))
       If IsNothing(ItemList) OrElse ItemList.Count = 0 Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
@@ -2196,6 +2304,7 @@ Public Class SplitPageUC
 
       ' gestione bottone per generazione ponticelli
       If Type = MCH_OY.WATERJETTING Then
+         InvertBtn.Visibility = Visibility.Visible
          ' siccome la stessa posizione è occupata da due comandi sovrapposti
          If CutStartBtn.Visibility = Visibility.Hidden Then
             BridgesWJBtn.Visibility = Visibility.Visible

CadCuts/VacuumCups.vb

@@ -1,5 +1,6 @@
 Imports EgtUILib
 Imports System.Text.RegularExpressions
+Imports System.Threading
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -31,6 +32,19 @@ Module VacuumCups
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
 
+   Private m_sHeadName As String = VACUUM_HEAD
+   Public Sub ResetHeadName()
+      Dim bReload As Boolean = (m_sHeadName <> VACUUM_HEAD)
+      m_sHeadName = VACUUM_HEAD
+      If bReload Then LoadVacuumCups()
+   End Sub
+   Public Function ChangeHeadName() As Boolean
+      If EgtGetHeadId( VACUUM_HEAD_2) = GDB_ID.NULL Then Return False
+      m_sHeadName = If( m_sHeadName = VACUUM_HEAD, VACUUM_HEAD_2, VACUUM_HEAD) 
+      LoadVacuumCups()
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    Friend Class RawMoveData
 
@@ -87,17 +101,17 @@ Module VacuumCups
    Friend Function LoadVacuumCups() As Boolean
       ' Leggo tipo manipolatore con ventosa
       m_nVacType = 0
-      EgtGetInfo(EgtGetHeadId(VACUUM_HEAD), KEY_VAC_TYPE, m_nVacType)
+      EgtGetInfo(EgtGetHeadId(m_sHeadName), KEY_VAC_TYPE, m_nVacType)
       ' Cancello eventuali vecchie ventose
       RemoveVacuumCups()
       ' Identificativo ventose nella macchina
-      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), VACUUM_HEAD_LAYOUT)
+      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), VACUUM_HEAD_LAYOUT)
       If nLayId = GDB_ID.NULL Then Return False
       ' Identificativo riferimento della testa nella macchina
-      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
+      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
       ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
-      EgtSetCalcTool("", "H4", 1)
+      EgtSetCalcTool("", m_sHeadName, 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -107,23 +121,23 @@ Module VacuumCups
       m_nVacId = EgtCopyGlob(nLayId, m_nTempId)
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
       ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
-      EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
       EgtSetStatus(m_nVacId, GDB_ST.OFF)
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -152,7 +166,7 @@ Module VacuumCups
    Friend Function ResetVacuumCups() As Boolean
       ' Ripristino posizione e rotazione originali
       Dim frOriRef As New Frame3d
-      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
+      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
       Dim frCurrRef As New Frame3d
       EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
       EgtMove(m_nVacId, frOriRef.Orig() - frCurrRef.Orig(), GDB_RT.GLOB)
@@ -164,10 +178,10 @@ Module VacuumCups
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -207,14 +221,17 @@ Module VacuumCups
       EgtSurfFrGrossArea(nRKerfId, RawArea)
       ' volume calcolato in mmc
       Dim RawVolume As Double = RawArea * b3Raw.DimZ()
-      ' peso calolato in kg
+      ' peso calcolato in kg
       m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
       '-------------------- FINE CALCOLO PESO --------------------
 
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
+      Else
+         If ChangeHeadName() Then Return False
       End If
+
       ' In caso di fallimento, provo riducendo con offset la regione di kerf
       ' (così si simula la proiezione del centro sul MAT - medial axis transform)
       Dim bOkFind As Boolean = False
@@ -241,20 +258,20 @@ Module VacuumCups
       ' Verifico sia veramente un pezzo
       If EgtGetRawPartFromPart(nPartId) = GDB_ID.NULL Then Return False
       ' Cerco la direzione del primo taglio attivo da sotto
-      Dim nDripLayId As Integer = EgtGetFirstNameInGroup( nPartId, NAME_DRIPCUT)
-      Dim nDripLineId As Integer = EgtGetFirstInGroup( nDripLayId)
+      Dim nDripLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_DRIPCUT)
+      Dim nDripLineId As Integer = EgtGetFirstInGroup(nDripLayId)
       While nDripLineId <> GDB_ID.NULL
-         Dim nMchId As Integer = EgtGetOperationId( "DripSaw" & nDripLineId.ToString())
+         Dim nMchId As Integer = EgtGetOperationId("DripSaw" & nDripLineId.ToString())
          Dim nMode As Integer
-         If EgtGetMode( nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
-         nDripLineId = EgtGetNext( nDripLineId)
+         If EgtGetMode(nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
+         nDripLineId = EgtGetNext(nDripLineId)
       End While
       Dim vtDir As New Vector3d
-      if EgtStartVector( nDripLineId, GDB_ID.ROOT, vtDir) Then
+      If EgtStartVector(nDripLineId, GDB_ID.ROOT, vtDir) Then
          Dim dLen, dAngV, dAngH As Double
-         vtDir.ToSpherical( dLen, dAngV, dAngH)
+         vtDir.ToSpherical(dLen, dAngV, dAngH)
          Dim dOffsAng = dAngH - m_dDripRefAng
-         While dOffsAng - m_dPreferredRot >= 90 
+         While dOffsAng - m_dPreferredRot >= 90
             dOffsAng -= 180
          End While
          While dOffsAng - m_dPreferredRot <= -90
@@ -388,7 +405,7 @@ Module VacuumCups
 
    Private Function GetVacRotAxisSteps(ByRef vAngRot As List(Of Double)) As Boolean
       ' Recupero l'asse rotante della testa ventosa
-      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(VACUUM_HEAD))
+      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(m_sHeadName))
       ' Verifico se contiene info con STEPS
       Dim sSteps As String = ""
       If Not EgtGetInfo(nRotAxId, KEY_ROTVAC_STEPS, sSteps) Then Return False
@@ -493,15 +510,15 @@ Module VacuumCups
          ' Ordino secondo distanza angolare crescente da direzione di allineamento (modulo 180 deg)
          Dim dRotRefDeg As Double = dRotAngDeg
          vAngRot.Sort(Function(P, Q)
-                         Dim dDiffP = Math.Abs( P - dRotRefDeg)
-                         If Math.Abs( dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
-                         Dim dDiffQ = Math.Abs( Q - dRotRefDeg)
-                         If Math.Abs( dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
-                         Return ( dDiffP - dDiffQ)
+                         Dim dDiffP = Math.Abs(P - dRotRefDeg)
+                         If Math.Abs(dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
+                         Dim dDiffQ = Math.Abs(Q - dRotRefDeg)
+                         If Math.Abs(dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
+                         Return (dDiffP - dDiffQ)
                       End Function)
          ' Annullo la rotazione di allineamento
          dRotAngDeg = 0
-      ' altrimenti in continuo
+         ' altrimenti in continuo
       Else
          ' Assegno più valori di ricerca e conservo angolo di allineamento
          vAngRot.AddRange({0, +5, -5, +12.5, -12.5, +25, -25, +45, -45})
@@ -548,25 +565,43 @@ Module VacuumCups
 
    ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim sAxisName As String = "C"
+      ' verifico che il nome dell'asse impostato sia corretto
+      If EgtGetAxisId(sAxisName) = GDB_ID.NULL Then
+         If m_sHeadName = VACUUM_HEAD Then
+            sAxisName = "C1"
+         Else
+            sAxisName = "C2"
+         End If
+      End If
       ' Posizione Home dell'asse rotante
       Dim dCHome As Double
-      EgtGetAxisHomePos("C", dCHome)
+      EgtGetAxisHomePos(sAxisName, dCHome)
       ' Corse dell'asse
       Dim dCMin As Double
-      EgtGetAxisMin("C", dCMin)
+      EgtGetAxisMin(sAxisName, dCMin)
       Dim dCMax As Double
-      EgtGetAxisMax("C", dCMax)
+      EgtGetAxisMax(sAxisName, dCMax)
       ' Porto l'angolo nel range
       Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
       AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
       ' Imposto la ventosa come fosse un utensile
-      EgtSetCalcTool("", "H4", 1)
+      EgtSetCalcTool("", m_sHeadName, 1)
       ' Calcolo gli assi macchina
       Dim dX, dY, dZ As Double
       Dim nStat As Integer
-      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
-      ' Verifico le corse
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      If EgtGetAxisId("A") <> GDB_ID.NULL Then
+         ' Asse tavola rotante (movimenti solo con A0)
+         EgtGetCalcPositions(ptRef, 0, dRotAngMachDeg, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, 0, dRotAngMachDeg, nStat)
+      Else
+         EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      End If
+
+
       Return nStat
    End Function
 
@@ -732,7 +767,7 @@ Module VacuumCups
             rmList.RemoveAt(nInd)
             nInd = rmList.Count() - 1
          End If
-      ' Se non trovato, lo accodo
+         ' Se non trovato, lo accodo
       Else
          rmList.Add(New RawMoveData(nRawId))
          nInd = rmList.Count() - 1

Constants/ConstGen.vb

@@ -84,6 +84,11 @@ Module ConstGen
 
    ' Nome testa con ventose per spostamento pezzi
    Public Const VACUUM_HEAD As String = "H4"
+   Public Const VACUUM_HEAD_2 As String = "H104"
+   ' Nome teste laser
+   Public Const LASER_HEAD As String = "H3"
+   Public Const LASER_HEAD_2 As String = "H103"
+
    ' Info tipo ventosa
    Public Const KEY_VAC_TYPE As String = "VacType"
    ' Nome gruppo layout in testa con ventose
@@ -218,6 +223,8 @@ Module ConstGen
    Public Const INFO_DEPTH2 As String = "Depth2"
    Public Const INFO_AGG2 As String = "Agg2"
    Public Const INFO_ROUNDOFF As String = "RoundOff"
+   Public Const INFO_DIRECTCUT As String = "DirectCut"
+   Public Const INFO_STEP_TYPE As String = "StepType"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -313,6 +320,8 @@ Module ConstGen
    Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
    ' Info in OutLoop per punto inzio lavorazione WaterJet
    Public Const INFO_START As String = "Start"
+   ' Nome dei tagli diretti inseriti in fase di Splitting
+   Public Const SPLIT_CUT As String = "SplitCut"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

Constants/ConstIni.vb

@@ -19,6 +19,7 @@ Module ConstIni
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
    Public Const K_NETKEY As String = "NetKey"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -52,7 +53,7 @@ Module ConstIni
    Public Const K_GENERATECN As String = "GenerateCN"
    Public Const K_FRACTIONPATTERN As String = "FractionPattern"
    Public Const K_PRECISION As String = "Precision"
-
+   Public Const K_QUITDRAWPAGE As String = "QuitDrawPage"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -116,6 +117,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -204,6 +207,7 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -223,6 +227,12 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
@@ -277,6 +287,8 @@ Module ConstIni
    Public Const S_VEINMATCHING As String = "VeinMatching"
    Public Const K_VEINMA_ENABLE As String = "Enable"
    Public Const K_VEINMA_PLACE As String = "WinPlace"
+   Public Const K_VEINMA_WIDTH As String = "Width"
+   Public Const K_VEINMA_HEIGHT As String = "Height"
 
    Public Const S_FASTGRID As String = "FastGrid"
    Public Const K_FG_ENABLE As String = "FGEnable"
@@ -323,6 +335,7 @@ Module ConstIni
    Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
    Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
    Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
    Public Const K_DC_FLATT_POSX As String = "FlattPosX"
    Public Const K_DC_FLATT_POSY As String = "FlattPosY"
    Public Const K_DC_POLISH_NAME As String = "PolishName"

Constants/ConstMachIni.vb

@@ -5,6 +5,7 @@
 
    Public Const S_PARTPROGRAM As String = "PartProgram"
    Public Const K_EXTENSION As String = "Extension"
+   Public Const K_EXTFILECN As String = "ExtFileCN"
 
    Public Const S_AXES As String = "Axes"
    Public Const K_AXESNUM As String = "AxesNum"
@@ -56,6 +57,10 @@
    Public Const S_EXECLUA As String = "ExecLua"
    Public Const K_FILESCRIPT_LUA As String = "FileScript"
 
+   Public Const S_CAMERAHQ As String = "CameraHQ"
+   Public Const K_CAMERAHQ_ENABLE As String = "EnableHQ"
+   Public Const K_CAMERAHQ_ACTIVATE As String = "ActivateHQ"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -92,6 +97,9 @@
    Public Const K_ENABLEZONE As String = "EnableZone"
    Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
+   Public Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Public Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Public Const BTN_ENABLE_PC As String = "EnablePC"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
    Public Const K_VACUUM2UP As String = "Vacuum2Up"
@@ -121,6 +129,7 @@
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
    Public Const K_NAXES As String = "nAxes"
+   Public Const K_RESETSTATUS As String = "ResetStatus"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -151,6 +160,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"
@@ -167,6 +180,8 @@
    Public Const K_PHOTO_OFFSETY As String = "OffsetY"
    Public Const K_PHOTO_TAB2_OFFSETX As String = "Tab2OffsetX"
    Public Const K_PHOTO_TAB2_OFFSETY As String = "Tab2OffsetY"
+   Public Const K_PHOTO_HQ_OFFSETX As String = "HQOffsetX"
+   Public Const K_PHOTO_HQ_OFFSETY As String = "HQOffsetY"
 
    Public Const S_TOOLS As String = "Tools"
    Public Const K_DRILLBIT As String = "Drillbit"
@@ -216,6 +231,7 @@
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
    Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENERTOOLPATH As String = "StartCenterToolPath"
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
@@ -232,7 +248,8 @@
    Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
    Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
    Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
-   ' DrillMillC90
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
+   Public Const K_MACH_DRILL_MILL_C90 As String = "DrillMillC90"
    ' CutLongDxSx
    ' AngRotMultiCut
    ' MinDistHeadsMultiCut

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -183,6 +183,9 @@ Public Class ControlsDirectCutUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_SingleCut.SetEnableParam(bSaw)
       m_MultipleCut.SetEnableParam(bSaw)
       m_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -99,6 +99,9 @@ Public Class ControlsDirectCutUC1
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       'm_SingleCut.SetEnableParam(bSaw)
       'm_MultipleCut.SetEnableParam(bSaw)
       'm_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -23,6 +23,9 @@ Public Class ControlsMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -72,6 +75,12 @@ Public Class ControlsMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            GetTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
@@ -81,6 +90,22 @@ Public Class ControlsMachineButtonUC
    ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
    '-------------------------------------------------------------------------------
 
+   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -344,33 +369,61 @@ Public Class ControlsMachineButtonUC
    End Sub
 
    Friend Sub ZoneStateChanged(ZoneState As Integer)
-      'Dim sFlag As String = String.Empty
-      'If ZoneState = 1 Then
-      '   sFlag = BTN_ENABLE_ZONE_1
-      'ElseIf ZoneState = 2 Then
-      '   sFlag = BTN_ENABLE_ZONE_2
-      'End If
-      'Dim EnableZoneButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEZONE Then
-      '      EnableZoneButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnableZoneButton) Then
-      '   EnableZoneButton.SetIsChecked(EnableZone)
-      'End If
+      Dim bEnableZone1 As Boolean = False
+      If ZoneState = 1 Then
+         bEnableZone1 = True
+      ElseIf ZoneState = 2 Then
+         bEnableZone1 = False
+      End If
+      ' attivo il comando associato
+      Dim EnableZoneButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_1 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(bEnableZone1)
+      End If
+      ' disattivo l'altro per esclusione
+      EnableZoneButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(Not bEnableZone1)
+      End If
    End Sub
 
-   Friend Sub PcStateChanged(EnablePC As Boolean)
-      'Dim EnablePCButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEPC Then
-      '      EnablePCButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnablePCButton) Then
-      '   EnablePCButton.SetIsChecked(EnablePC)
-      'End If
+   Friend Sub PcStateChanged(EnablePC As Integer)
+      Dim bEnablePC1 As Boolean = False
+      If EnablePC = 1 Then
+         bEnablePC1 = True
+      ElseIf EnablePC = 2 Then
+         bEnablePC1 = False
+      End If
+      ' attivo/disattivo il comando associato
+      Dim EnablePCButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_ENABLEPC & "_1" Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(bEnablePC1)
+      End If
+      ' disattivo/attivo l'altro per esclusione
+      EnablePCButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(Not bEnablePC1)
+      End If
    End Sub
 
 #End Region    ' State Range
@@ -683,6 +736,17 @@ Public MustInherit Class MachineButton
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
 
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -691,8 +755,17 @@ Public MustInherit Class MachineButton
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
+
+      ' versione 2.6h1
+      Dim sCurrTable As String = String.Empty
+      Dim nCuttTable As Integer = 1
+      EgtGetTableName(sCurrTable)
+      If sCurrTable <> "MainTab" Then nCuttTable = 2
+      EgtLuaSetGlobIntVar("CMD.TABLE", nCuttTable)
+
       EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
+
+      ' Leggo variabili da file Lua
       CmdString = String.Empty
       EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
       b2Start = False
@@ -749,11 +822,26 @@ Public Class TwoStateButton
       Set(value As Boolean)
          ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
+         Dim sLuaScriptFile As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
          If value Then
+            sLuaScriptFile &= TLuaScriptName
             ExecuteMDICommand(TLuaScriptName)
          Else
+            sLuaScriptFile &= FLuaScriptName
             ExecuteMDICommand(FLuaScriptName)
          End If
+
+         Dim IsPressedShiftKey As Boolean = False
+         If Keyboard.Modifiers And ModifierKeys.Shift And
+            GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_MainWindow.GetIniFile()) > 4 Then IsPressedShiftKey = True
+         ' procedo all'apertura del file CadCut1 appena generato (solo se generazione corretta)
+         If IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sLuaScriptFile)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End Set
    End Property
    Friend Sub SetIsChecked(value As Boolean)

DirectCuts/CopyTemplateUC.xaml.vb

@@ -166,6 +166,15 @@ Public Class CopyTemplateUC
    Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
       ' Verifico configurazione tavola e grezzo
       If Not m_bTabOk Then Return
+
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -173,14 +182,19 @@ Public Class CopyTemplateUC
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
             Return
          End If
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -188,7 +202,7 @@ Public Class CopyTemplateUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
@@ -196,8 +210,6 @@ Public Class CopyTemplateUC
       Else
          ' Verifico presenza punto da mouse
          If Not m_bMouseOk Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Assegno punto selezionato nel disegno a m_ptTipP1

DirectCuts/DirectCutPageUC.xaml.vb

@@ -146,6 +146,9 @@ Public Class DirectCutPageUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)

DirectCuts/FlatteningCut.xaml

@@ -7,142 +7,185 @@
    mc:Ignorable="d" 
    d:DesignHeight="597.3" d:DesignWidth="256">
 
-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-      <!-- Definizione della Grid FlatteningCut -->
-      <Grid Name="FlatteningCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <!-- Definizione della Grid FlatteningCut -->
+            <Grid Name="FlatteningCutGrid" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
 
-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
+                    <ToggleButton Name="Point1Btn" Grid.Column="0"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-                <ToggleButton Name="Point2Btn" Grid.Column="1"
+                    <ToggleButton Name="Point2Btn" Grid.Column="1"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-            </Grid>
+                </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                          Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
+
+                <Grid Name="DatiTaglioGrid" >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.1"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="0.1"/>
+                    </Grid.RowDefinitions>
+
+                    <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+                <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+                    <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="12" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                    <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                        <ComboBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ComboBox.ItemTemplate>
+                    </ComboBox>
+
+                    <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                </Grid>    
+            </ScrollViewer>
+
+            <Grid Grid.Row="12" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </Grid>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
             </Grid>
-
-      </Grid>
-
-   </Border>
+        
+    </Border>
 
 </UserControl>

DirectCuts/FlatteningCut.xaml.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.Reflection
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
 
 Public Class FlatteningCut
 
@@ -35,14 +37,18 @@ Public Class FlatteningCut
    Private m_bHeadSide As Boolean = False
    Private m_nMachType As Integer = 1
    Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
    ' Array delle modalità di acquisizione dei punti
    Private m_PointsModeArray(2) As String
    ' Array delle tipologia di lavorazione della spianatura
-   Private m_TypeArray(1) As String
+   Private m_TypeArray(2) As String
    ' Punto selezionato nel disegno
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,8 +63,9 @@ Public Class FlatteningCut
    End Enum
    ' Costanti che indicano la tipologia di lavorazione della spianatura
    Private Enum MACH_TYPE As Integer
-      ONEWAY = 0
-      ZIGZAG = 1
+      ZIGZAG = 0
+      ONEWAY = 1
+      SPIRAL = 2
    End Enum
    'Costante che indica il lato in cui posizionare i tagli
    Private Enum CutSide As Integer
@@ -66,6 +73,11 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
    ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
@@ -75,8 +87,9 @@ Public Class FlatteningCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Creo lista tipo lavorazione
-      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
       m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(MSG_COMBOBOXPARAM + 38)
+      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
+      m_TypeArray(MACH_TYPE.SPIRAL) = EgtMsg(MSG_COMBOBOXPARAM + 51)
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
@@ -90,19 +103,26 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
+      ChainedPathTxBl.Text = "Chained path"
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
+      m_ToolsArray(TOOL.MILL) = "Mill"
+      SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dWid = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dWid = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
       m_dOverlap = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, m_dOverlap, m_MainWindow.GetIniFile())
       m_dZReleased = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, m_dZReleased, m_MainWindow.GetIniFile())
       m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_nMachType = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
-      m_bRotLock = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
+      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
@@ -125,16 +145,16 @@ Public Class FlatteningCut
       ' Disabilito registrazione progetto modificato
       EgtDisableModified()
       ' Creo layer temporaneo per crocette
-      m_nTempLay = EgtCreateGroup( GDB_ID.ROOT)
-      EgtSetLevel( m_nTempLay, GDB_LV.TEMP)
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
       ' Origine tavola
       m_bRawOk = True
-      If Not EgtGetTableRef( 1, m_ptTabOri) Then
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
          m_bRawOk = False
          EgtOutLog("Error on TableRef1")
       End If
       ' Dati del grezzo
-      If Not GetRawBox( m_ptRawMin, m_ptRawMax) Then
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
          m_bRawOk = False
          EgtOutLog("Error on RawBox")
       End If
@@ -142,7 +162,7 @@ Public Class FlatteningCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -151,10 +171,10 @@ Public Class FlatteningCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione già definiti
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      LenghtTxBx.Text = LenToString( m_dLen, 1)
-      WidthTxBx.Text = LenToString( m_dWid, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      LenghtTxBx.Text = LenToString(m_dLen, 1)
+      WidthTxBx.Text = LenToString(m_dWid, 2)
       OverlapTxBx.Text = LenToString(m_dOverlap, 2)
       ZReleasedTxBx.Text = LenToString(m_dZReleased, 2)
       ' carico la quota di svincolo per la spianatura
@@ -163,6 +183,9 @@ Public Class FlatteningCut
       SideChBx.IsChecked = m_bHeadSide
       TypeCmBx.SelectedIndex = m_nMachType
       RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile in definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -176,19 +199,22 @@ Public Class FlatteningCut
 
    Friend Sub FlatteningCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString( m_dWid, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString(m_dWid, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If(m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
+         ' imposto la Z di sicurezza corretta
+         EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+         EgtMdbSave()
          ' Dichiaro sottopagina da non riattivare
          m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
@@ -265,30 +291,43 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -298,15 +337,13 @@ Public Class FlatteningCut
          m_dAngO = dTAngO + 90
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -336,27 +373,40 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
          If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
@@ -364,15 +414,13 @@ Public Class FlatteningCut
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -406,7 +454,7 @@ Public Class FlatteningCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -521,6 +569,16 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
       m_bRotLock = RotLockChBx.IsChecked
       ' Disegno il taglio
@@ -529,6 +587,14 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -580,9 +646,9 @@ Public Class FlatteningCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -597,13 +663,15 @@ Public Class FlatteningCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -617,10 +685,12 @@ Public Class FlatteningCut
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
       ' vedere nella pagina Allarm il capito "Incisioni"
-      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bForceUseMill As Boolean = (m_nTool = TOOL.MILL)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
       If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         Dim bSetTool As Boolean = EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+         If Not bSetTool Then EgtOutLog("Erro nel settaggio utensile lama " & m_MainWindow.m_CurrentMachine.sCurrSaw)
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -655,18 +725,24 @@ Public Class FlatteningCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, 1)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
-      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+      If (m_nTool = TOOL.MILL) Then
          EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
       End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Imposto se iniziare la fresatura dal punto indicato
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+      If Not bReducePath Then EgtSetInfo(nCutId, INFO_STRICT, 0)
+
       ' Eventuale bloccaggio rotazione asse C tra le passate
       If RotLockChBx.IsChecked Then
          EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
       End If
+      EgtSetInfo(nCutId, INFO_STEP_TYPE, m_nMachType)
       ' Funzione che crea i tagli successivi al primo
       MultiplyCut(nLayerId, nCutId)
       ' Creo layer per crocetta di riferimento
@@ -699,10 +775,17 @@ Public Class FlatteningCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
+      Dim bEngWithMill As Boolean = (m_nTool = TOOL.MILL)
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+
       ' Recupero spessore della lama (utensile) correntemente attiva
       Dim dThick As Double = GetFootPrintTool()
       If dThick = 0 Then Return False
 
+      ' Salvo la prima curva nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
@@ -720,6 +803,10 @@ Public Class FlatteningCut
       If nStepNum > 1 Then
          dDelta = dWidth / (nStepNum - 1)
       End If
+      ' definisco la larghezza dell'utensile (solo per la fresa)
+      EgtSetInfo(nCutId, INFO_WIDTH, dThick)
+      ' definisco il tipo di utensile da utilizzare
+      EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
       ' Creo vettore delta
       vtDelta *= dDelta
       ' Creo indice per impostare info che indica tipologia di spianatura
@@ -728,6 +815,8 @@ Public Class FlatteningCut
          Dim vtPerpMove As Vector3d = Index * vtDelta
          ' Creo copie
          Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
+         EgtSetInfo(nCut2Id, INFO_WIDTH, dThick)
+         EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
          ' Assegno info direzione a seconda del tipo di spianatura
          If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
             If nTypeIndex = 1 Then
@@ -741,10 +830,77 @@ Public Class FlatteningCut
             EgtSetInfo(nCut2Id, INFO_DIR, 1)
          End If
          EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+         If m_bChainedPath And bEngWithMill Then
+            If bReducePath Then
+               If Index < nStepNum - 1 Then
+                  ExtendLenghtMillPath(nCut2Id, -dThick / 2)
+               ElseIf Index = nStepNum - 1 Then
+                  If nStepNum Mod 2 = 0 Then
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, False, True)
+                  Else
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, True, False)
+                  End If
+               End If
+            End If
+               CutsList.Add(nCut2Id)
+            End If
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+
       Next
+
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+      If m_bChainedPath And bEngWithMill Then
+         ' Decidere se accorciare i tagli del valore del raggio utensile!
+         If bReducePath Then
+            ExtendLenghtMillPath(CutsList(0), -dThick / 2, False, True)
+         End If
+         For Index As Integer = 0 To CutsList.Count - 2
+            If Index Mod 2 <> 0 Then
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtStartPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtStartPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            Else
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtEndPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtEndPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            End If
+         Next
+         Dim ptNear As Point3d
+         EgtStartPoint(CutsList(0), ptNear)
+         Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, 1)
+         EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
+         EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
+         ' Se unisco il percorso devo per forza usare la fresa!
+         EgtSetInfo(IdJointCurv, "EngravingWithMill", 1)
+         If Not bReducePath Then EgtSetInfo(IdJointCurv, INFO_STRICT, 0)
+      End If
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+
       Return True
    End Function
 
+   Private Sub ExtendLenghtMillPath(ByVal IdCurv As Integer, ByVal ReduceVal As Double,
+                                    ByVal Optional bStart As Boolean = True, ByVal Optional bEnd As Boolean = True)
+      Dim PtStart As Point3d
+      EgtStartPoint(IdCurv, GDB_RT.GLOB, PtStart)
+      Dim PtEnd As Point3d
+      EgtEndPoint(IdCurv, GDB_RT.GLOB, PtEnd)
+      If bStart Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtStart, GDB_RT.GLOB)
+      If bEnd Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtEnd, GDB_RT.GLOB)
+      Dim dLenLine As Double
+      EgtCurveLength(IdCurv, dLenLine)
+      EgtOutLog("Lunghezza segmento ridotto: " & dLenLine.ToString)
+   End Sub
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)

DirectCuts/GridCut.xaml.vb

@@ -38,6 +38,8 @@ Public Class GridCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -82,7 +84,12 @@ Public Class GridCut
       m_nNumX = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
       m_dDimX = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
       m_nNumY = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
-      m_dDimY = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -141,6 +148,11 @@ Public Class GridCut
       NumPzYTxBx.Text = m_nNumY.ToString()
       DimPzYTxBx.Text = LenToString( m_dDimY, 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -248,6 +260,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -260,6 +278,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -267,7 +292,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -275,10 +300,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -327,6 +352,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -339,6 +370,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -346,7 +384,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -354,10 +392,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -405,7 +443,7 @@ Public Class GridCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -523,13 +561,15 @@ Public Class GridCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -616,6 +656,15 @@ Public Class GridCut
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Imposto affondamento e angolo di fianco sul taglio
          EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
          EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
@@ -634,6 +683,13 @@ Public Class GridCut
          ' Arretro il punto di partenza di uno spessore lama
          Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
          Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Specchio se è attivo il flag che cambia lato di disegno
          If SideChBx.IsChecked() Then
             Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
@@ -656,6 +712,7 @@ Public Class GridCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/MachineButtonsUC.xaml.vb

@@ -35,6 +35,7 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
    Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
    Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
    Private Const BTN_ENABLE_PC As String = "EnablePC"
@@ -380,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -700,6 +712,40 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    Friend Sub EnableZoneStateChanged(ZoneState As Integer)
       Dim sFlag As String = String.Empty
       If ZoneState = 1 Then

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -53,14 +53,43 @@ Public Class ManualAxesMoveUC
       ' Imposto check per considerare spessore lama
       L1SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
       L2SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
+
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      EgtDraw()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
    End Sub
 
    Private Sub ManualAxesMove_UnLoaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       m_Timer.Stop()
       m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove = (L1SawThChBx.IsEnabled And L1SawThChBx.IsChecked) Or
                                                          (L2SawThChBx.IsEnabled And L2SawThChBx.IsChecked)
+      ' Nascondo la macchina
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+      EgtSetMachineLook(MCH_LOOK.TAB)
+      EgtDraw()
    End Sub
 
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
    Private Sub UpdateAxesNames()
       Dim sL1 As String = String.Empty
       Dim sL2 As String = String.Empty
@@ -125,11 +154,16 @@ Public Class ManualAxesMoveUC
    Private Sub Timer_tick()
       UpdateAxesNames()
       UpdateUseSawThickness()
+      ' Aggiorno posizione macchina in disegno
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private m_MoveClicked As Boolean = False
    Private Sub XXBtn_Click(sender As Object, e As MouseButtonEventArgs) Handles L1Btn.PreviewMouseDown, L2Btn.PreviewMouseDown, L3Btn.PreviewMouseDown, R1Btn.PreviewMouseDown, R2Btn.PreviewMouseDown
       If e.ClickCount > 1 OrElse m_MoveClicked Then
+         EgtOutLog(" → Hold on! Do not click compulsively.")
          Return
       End If
       m_MoveClicked = True
@@ -216,6 +250,7 @@ Public Class ManualAxesMoveUC
    Private Sub SiemensMoveAxis(CurrentBtn As Button)
       ' leggo se stato reset
       If Not m_CN.bResetState Then
+         EgtOutLog("Reset status is 'False', is denied to execute file '\DirectCmd\AxesMove.lua'.")
          m_MoveClicked = False
          Return
       End If

DirectCuts/MultipleCut.xaml.vb

@@ -38,7 +38,8 @@ Public Class MultipleCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
-
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -90,9 +91,14 @@ Public Class MultipleCut
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
       m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       For nI As Integer = 0 To 9
-         m_nNum( nI) = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_NUM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
-         m_dDim( nI) = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_DIM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_nNum(nI) = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_MULT_NUM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_dDim(nI) = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_MULT_DIM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
       Next
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -168,6 +174,11 @@ Public Class MultipleCut
       NumPz10TxBx.Text = m_nNum(9).ToString()
       DimPz10TxBx.Text = LenToString( m_dDim(9), 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -274,6 +285,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -286,6 +303,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -293,7 +317,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
@@ -303,10 +327,10 @@ Public Class MultipleCut
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -354,6 +378,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -366,6 +396,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -373,7 +410,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -381,10 +418,10 @@ Public Class MultipleCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -435,7 +472,7 @@ Public Class MultipleCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -569,13 +606,15 @@ Public Class MultipleCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -606,6 +645,22 @@ Public Class MultipleCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      ' Recupero spessore lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      EgtTdbSetCurrTool(sSaw)
+      Dim dThick As Double = 0
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
+      If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+         EgtOffsetCurve(nCutId, -dThick, OFF_TYPE.EXTEND)
+      End If
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
@@ -698,6 +753,7 @@ Public Class MultipleCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/Polishing.xaml.vb

@@ -180,13 +180,15 @@ Public Class Polishing
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub

DirectCuts/SawTestUC.xaml.vb

@@ -210,17 +210,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -228,10 +241,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -280,17 +293,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -298,10 +324,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -351,7 +377,7 @@ Public Class SawTestUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -450,13 +476,15 @@ Public Class SawTestUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -502,6 +530,10 @@ Public Class SawTestUC
       ElseIf nWSide = MCH_SAW_WS.LEFT Then
          vtPerp = vtDir
          vtPerp.Rotate(Vector3d.Z_AX, +90)
+      Else
+         m_CurrProjPage.ClearMessage()
+         ' 91144 = Set machining side: right or left.
+         m_CurrProjPage.SetInfoMessage(EgtMsg(91144))
       End If
       Dim ptEnd As Point3d = ptStart + vtDir * m_dLen + vtPerp * dThick
       Dim dLen2 As Double = m_dLen / 2

DirectCuts/SingleCutUC.xaml.vb

@@ -40,7 +40,7 @@ Public Class SingleCutUC
    Private m_nTempLay As Integer = GDB_ID.NULL
 
    ' Costanti
-   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MAX_TAB_DEPTH As Double = 10.0  ' sostituita da un m_MaxTabDepth letto da file ini macchina
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
@@ -268,6 +268,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -279,6 +285,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -286,7 +299,8 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H3: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -294,10 +308,11 @@ Public Class SingleCutUC
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H1: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -318,7 +333,6 @@ Public Class SingleCutUC
          m_bPointP1Ok = True
          ' Reimposto eventuale precedente utensile
          EgtSetCalcTool(sTool, sHead, nExit)
-
       End If
 
       ' Disegno il taglio
@@ -348,6 +362,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -359,6 +379,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -366,20 +393,20 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            EgtOutLog("Coordinate punto 2 da H3: " & m_ptTipP2.x.ToString & " ," & m_ptTipP2.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
-
             ' Altrimenti da lama
          Else
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -412,6 +439,7 @@ Public Class SingleCutUC
          m_dAngO = dAngOrizzDeg
          LenghtTxBx.Text = LenToString(m_dLen, 1)
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+         EgtOutLog("Lunghezza taglio: " & dLen.ToString & "Angolo: " & dAngOrizzDeg.ToString)
          CreateSingleCut()
          ' Disegno la macchina nella sua posizione reale
          SetMachineInCurrPos()
@@ -429,7 +457,7 @@ Public Class SingleCutUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -584,13 +612,15 @@ Public Class SingleCutUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -602,6 +632,7 @@ Public Class SingleCutUC
    Private Function CreateSingleCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
+         EgtOutLog("Primo punto non valido")
          m_bCutOk = False
          Return False
       End If

DirectCuts/SingleDrillUC.xaml.vb

@@ -72,7 +72,10 @@ Public Class SingleDrillUC
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_sCurrDrill = m_CurrentMachine.sCurrDrill
       GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
-
+      ' rimuovo utensile su uscite 1
+      EgtSetCalcTool("", "H1", 1)
+      ' imposto utensile su uscita 2
+      EgtSetCalcTool(m_sCurrDrill, "H1", 2)
       ' recupero informazioni del foretto usato
       EgtTdbSetCurrTool(m_sCurrDrill)
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
@@ -213,21 +216,33 @@ Public Class SingleDrillUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      If bIsMultiCut Then
+         EgtSetCalcTool(sDrill, "H1", 2)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-
-         ' Ricavo dati Foretto corrente
-         Dim sDrill As String = m_sCurrDrill
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Altrimenti da lama
@@ -235,10 +250,10 @@ Public Class SingleDrillUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -250,10 +265,8 @@ Public Class SingleDrillUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sDrill As String = m_sCurrDrill
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
       End If
 
       ' Disegno il taglio
@@ -371,8 +384,10 @@ Public Class SingleDrillUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -431,9 +446,9 @@ Public Class SingleDrillUC
       ptIns.z = dRawHeight
       ' Inserisco il pezzo nel grezzo
       EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      EgtSetCurrPhase(1)
       ' Inserisco la lavorazione
       m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
-      EgtSetCurrPhase(1)
       ' Eventuale eliminazione Home finale
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()

DirectCuts/SquaringUC.xaml.vb

@@ -287,8 +287,10 @@ Public Class SquaringUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -71,10 +74,37 @@ Public Class VacuumMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            OutLogTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub VacuumUpChanged(VacuumUpState As Boolean)
       Dim VacuumUpButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -371,6 +401,8 @@ Public Class VacuumMachineButtonUC
       Next
    End Sub
 
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -107,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/DrawPageUC.xaml.vb

@@ -283,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -553,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -1124,6 +1138,33 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1139,22 +1180,45 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
-      ' Aggiorno ambiente principale
-      EgtZoom(ZM.ALL)
-      ' Elimino nome del componente precedente
-      m_sCompoName = String.Empty
-      ' Reset inclinazioni
-      m_SideAngleUC.DeleteSideAngle()
-      ' Chiudo compo interni nel caso siano aperti
-      LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
-      ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert(InsNbr)
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+      Dim bExitPage As Boolean = GetPrivateProfileInt(S_GENERAL, K_QUITDRAWPAGE, 1, m_MainWindow.GetIniFile) <> 0
+      ' Se Shift premuto eseguo il contrario
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         bExitPage = Not bExitPage
+      End If
+      If bExitPage Then
+         ' Aggiorno ambiente principale
+         EgtZoom(ZM.ALL)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         ' Chiudo compo interni nel caso siano aperti
+         LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+         ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+      Else
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         DrawPage_Unloaded(sender, e)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         If String.IsNullOrEmpty(m_MainComponentPage.m_SecondaryComponentPage.m_sCurrCompo) Then
+            DrawPage_Loaded(sender, e)
+         Else
+            LoadSecondaryPage()
+         End If
 
+      End If
    End Sub
 
    ' esco dalla pagina corrente
@@ -1174,7 +1238,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
@@ -1446,17 +1510,39 @@ Public Class DrawPageUC
       ' Seleziono la Tab e la Page di apertura
       Select Case m_ActiveComponentPage
          Case Pages.MainComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage)
+
          Case Pages.SecondaryComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage.m_SecondaryComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+
          Case Pages.InternalComponent
-            LeftButtonGrd.Children.Remove( m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Remove(m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+
          Case Pages.CompoDimension
-            VariablesGrd.Children.Remove( m_CompoDimension)
+            VariablesGrd.Children.Remove(m_CompoDimension)
+
          Case Pages.SideAngle
-            VariablesGrd.Children.Remove( m_SideAngleUC)
+            Select Case m_SideAngleUC.m_Mode
+               Case SideAngleUC.ModeOpt.SIDEANGLE
+                  SideAngleBtn.IsChecked = False
+                  SideAngleBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.ENGRAVE
+                  EngraveBtn.IsChecked = False
+                  EngraveBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.DRIP
+                  DripCutBtn.IsChecked = False
+                  DripCutBtn_Click(Nothing, Nothing)
+            End Select
+            VariablesGrd.Children.Remove(m_SideAngleUC)
+
          Case Pages.FiloTop
+            FiloTopBtn.IsChecked = False
+            FiloTopBtn_Click(Nothing, Nothing)
             VariablesGrd.Children.Remove(m_FiloTopUC)
+
+         Case Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+
       End Select
 
       ' Pulisco l'ambiente lua

DrawImport/FiloTopUC.xaml.vb

@@ -38,17 +38,18 @@ Public Class FiloTopUC
       m_CallingPage = m_MainWindow.m_ActivePage
 
       ' Imposto messaggi
-      ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      ParameterTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 10)       ' Offset
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.FiloTop
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
       End If
 
       ' Gestisco visualizzazione dei parametri
@@ -57,9 +58,9 @@ Public Class FiloTopUC
       Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
-      m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
-      ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
-      m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
+      m_dFiloTopOffset = GetPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
+      ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+      m_dFiloTopDepth = GetPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
       Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
       m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
       Parameter3ChBx.IsChecked = m_bCornerradius
@@ -80,8 +81,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_OFFSET, m_dFiloTopOffset)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_OFFSET, m_dFiloTopOffset)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -101,8 +102,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_DEPTH, m_dFiloTopDepth)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_DEPTH, m_dFiloTopDepth)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -214,10 +215,13 @@ Public Class FiloTopUC
                   EgtErase(nLayFiloTop)
                   EgtRemoveInfo(nLayId, "FiloTopRef")
                   EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               Else
+                  m_MainWindow.m_DrawPageUC.MessageTxBx.Text = ""
+                  m_MainWindow.m_DrawPageUC.MessageBrd.Background = Brushes.Transparent
                End If
                ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
             End If
-               nLayId = EgtGetNextLayer(nLayId)
+            nLayId = EgtGetNextLayer(nLayId)
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While

DrawImport/ImportPageUC.xaml

@@ -7,58 +7,60 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
 
-   <!-- Definizione della ImportPage -->
-   <Border>
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         
-         <!-- Definizione della Grid superiore per Button -->
-         <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+    <!-- Definizione della ImportPage -->
+    <Border>
+        <Grid Name="ImportPageGrid" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="7*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
             </Grid.ColumnDefinitions>
-
-            <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="LeftGrid" Grid.RowSpan="3">
             <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="7.25*"/>
-               <RowDefinition Height="0.75*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+
+            <!-- Definizione della Grid superiore per Button -->
+            <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="SideAngleBtn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="FiloTopBtn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="EngraveBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
+               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            </Grid>
+
+            <!-- Definizione della Grid laterale -->
+            <Grid Name="LeftGrid" Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="7.25*"/>
+                    <RowDefinition Height="0.75*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
-                <Grid Grid.Row="3" Margin="0,0,8,0">
+                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
                     <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="4*"/>
                         <ColumnDefinition Width="1*"/>
@@ -68,68 +70,68 @@
                     <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
                         <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
                     </Button>
-                </Grid> 
-            
-            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
-               <TextBlock Name="MessageTxBx" TextAlignment="Center"
+                </Grid>
+
+                <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                    <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Border>
+                </Border>
 
-         </Grid>
-
-         <!-- Definizione della Grid inferiore per Button -->
-         <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-            <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-
-            <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-
-            <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
-            <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+            <!-- Definizione della Grid inferiore per Button -->
+            <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+                <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+                <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+
+                <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                  TextAlignment="Right"/>
+                    <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+                <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-            <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-            
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

DrawImport/ImportPageUC.xaml.vb

@@ -19,6 +19,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -85,6 +88,7 @@ Public Class ImportPageUC
       SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
       FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
       DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
+      EngraveBtn.Content = "Engrave"
       DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 
@@ -101,6 +105,8 @@ Public Class ImportPageUC
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -158,6 +164,10 @@ Public Class ImportPageUC
 
       ' Pulisco tutto
       ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
       FileListBox.UnselectAll()
       ' inibisco selezione diretta da Scene
       ImportScene.SetStatusNull()
@@ -196,7 +206,6 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
    End Sub
 
    Private Sub LoadGridData()
@@ -339,13 +348,18 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = False
       SideAngleBtn.IsEnabled = False
       FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
       DripDrillBtn.IsEnabled = False
       Return True
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -357,6 +371,10 @@ Public Class ImportPageUC
          Dim dScale As Double = If(m_bMM, ONEMM, ONEINCH)
          ' Importo file DXF
          bOk = bOk AndAlso EgtImportDxf(sPath, dScale)
+         ' riporto al piano tutte le superifici
+         EgtSelectAll()
+         EgtScale(GDB_ID.SEL, Frame3d.GLOB, 1, 1, 0)
+         EgtDeselectAll()
       ElseIf m_nFileType = FT.NGE Then
          ' Carico Nge
          bOk = bOk AndAlso EgtOpenFile(sPath)
@@ -396,7 +414,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = False
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
             ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -412,10 +434,14 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = True
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -425,10 +451,10 @@ Public Class ImportPageUC
    End Function
 
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
       ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
       ElseIf FiloTopBtn.IsChecked() Then
          OnMouseDownSceneFiloTop( e)
       End If
@@ -569,6 +595,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
@@ -585,6 +613,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -592,6 +622,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -601,7 +637,7 @@ Public Class ImportPageUC
 
    Private Sub SelectedPartChanged()
       ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          m_SideAngleUC.ReLoadSideAnglePage()
       End If
    End Sub
@@ -662,8 +698,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -694,8 +734,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -726,8 +770,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -1011,22 +1059,24 @@ Public Class ImportPageUC
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
       ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
          If SideAngleBtn.IsChecked() Then
             SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
          Else
             DripCutBtn.IsChecked() = False
          End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
       ElseIf DripDrillBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_UnderDrillUC)
          DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
       ElseIf FiloTopBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
@@ -1040,6 +1090,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1052,7 +1103,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1062,6 +1117,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1073,8 +1129,72 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1092,6 +1212,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1103,6 +1224,9 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1112,6 +1236,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1122,8 +1247,9 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1142,6 +1268,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1151,7 +1278,11 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
          ' Disabilito bottone reset
@@ -1160,6 +1291,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1172,8 +1304,12 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Riabilito bottone reset
@@ -1187,6 +1323,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1198,7 +1335,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1208,6 +1349,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1219,8 +1361,12 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True

DrawImport/MainComponentPageUC.xaml.vb

@@ -33,14 +33,31 @@ Public Class MainComponentPageUC
       m_bIsFirstPage = True
       LoadPage()
       CurrentBtn = Nothing
-      Compo9.SetValue(Grid.ColumnProperty, 0)
-      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      ImageCompo9.Visibility = Windows.Visibility.Hidden
-      LabelCompo9.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         ' se il numero delle componenti è superiore a 8 allora inserisco la seconda pagina
+         If GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 8 Then
+            OthersBackGr.Visibility = Visibility.Visible
+            Compo9.SetValue(Grid.ColumnProperty, 0)
+            Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+            ImageCompo9.Visibility = Windows.Visibility.Hidden
+            LabelCompo9.Visibility = Windows.Visibility.Visible
+         Else
+            OthersBackGr.Visibility = Visibility.Hidden
+         End If
+      Else
+         OthersBackGr.Visibility = Visibility.Visible
+         Compo9.SetValue(Grid.ColumnProperty, 0)
+         Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+         ImageCompo9.Visibility = Windows.Visibility.Hidden
+         LabelCompo9.Visibility = Windows.Visibility.Visible
+      End If
+
+
       m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +184,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +268,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +347,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,146 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="CompoBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="SelSectionBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
-                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <!--<Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>-->
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
+
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
-            Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <TextBlock Name="OffsXInteryTxBl"  Grid.Row="5" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Grid.Row="5" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <!--<UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>-->
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +204,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -52,6 +52,8 @@ Public Class FrameCutPageUC
       OffsXyTxBx.Text = LenToString(dOffsXY, 3)
       Dim dOffsYY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSYY, 5, m_MainWindow.GetIniFile())
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
+      Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
+      OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -70,6 +72,7 @@ Public Class FrameCutPageUC
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
+      OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -81,6 +84,12 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.COMPOFRAME) AndAlso GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0 Then
+         CompoBtn.Visibility = Visibility.Visible
+      Else
+         CompoBtn.Visibility = Visibility.Hidden
+      End If
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -271,7 +280,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -296,9 +305,13 @@ Public Class FrameCutPageUC
          WritePrivateProfileString(S_FRAME, K_OFFSXY, DoubleToString(dOffsXy, 3), m_MainWindow.GetIniFile())
       End If
       Dim dOffsYy As Double = 0
-      If StringToLen(OffsYyTxBx.Text, dOffsYY) Then
+      If StringToLen(OffsYyTxBx.Text, dOffsYy) Then
          WritePrivateProfileString(S_FRAME, K_OFFSYY, DoubleToString(dOffsYy, 3), m_MainWindow.GetIniFile())
       End If
+      Dim dOffsXIntery As Double = 0
+      If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
+         WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
+      End If
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -436,6 +449,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)
@@ -936,12 +959,18 @@ Public Class FrameCutPageUC
       ' Determino distanza da spessore lama
       Dim dMinDist As Double = 0
       Dim dSawThick As Double = 0
+      Dim dOffsXIntery As Double = 0
+      StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         dMinDist = dSawThick + 5 * EPS_SMALL
+         If dOffsXIntery <= dSawThick Then
+            dMinDist = dSawThick + 5 * EPS_SMALL
+         Else
+            dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
-         dMinDist = 0
+         dMinDist = dOffsXIntery
       End If
       ' Inserisco il pezzo nel grezzo
       Dim ptIns As Point3d

LicenseWindow.xaml

@@ -0,0 +1,63 @@
+<Window x:Class="LicenseWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OpenFile" Height="500.6" Width="426.6" WindowStyle="None"         
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="5.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <StackPanel Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3"
+                        Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <TextBlock Name="IconTxBl" Foreground="White" FontSize="32" 
+                           VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                <TextBlock Name="LicenseTxBl"  
+                   Foreground="White" FontSize="20" 
+                   VerticalAlignment="Center" HorizontalAlignment="Left"
+                   TextWrapping="Wrap"/>
+            </StackPanel>
+
+            <StackPanel Grid.Column="1" Grid.Row="2"  Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <ScrollViewer Name="MyScrollViewer" VerticalScrollBarVisibility="Auto">
+                <TextBlock Name="LicenseMsgTxBl" MaxWidth="340"
+                       HorizontalAlignment="Center"
+                       Foreground="{DynamicResource Omag_White}" FontSize="20" VerticalAlignment="Center"
+                       TextWrapping="Wrap"/>
+                </ScrollViewer>
+            </StackPanel>
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

LicenseWindow.xaml.vb

@@ -0,0 +1,37 @@
+Public Class LicenseWindow
+
+   Private m_sMessage As String = String.Empty
+   Private m_sTitle As String = String.Empty
+
+   Public Sub New(Owner As Window, sMsg As String, sTitle As String)
+      Me.Owner = Owner
+      m_sMessage = sMsg
+      m_sTitle = sTitle
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
+   Public Sub Init() Handles Me.Initialized
+      IconTxBl.Text = "⚠️"
+      LicenseTxBl.Text = "Warning" & vbCrLf & m_sTitle
+      m_sMessage = m_sMessage.Replace("/n", "£")
+      Dim sItems As String() = m_sMessage.Split("£")
+      For Index As Integer = 0 To sItems.Count - 1
+         If Index = 0 Then
+            m_sMessage = sItems(Index)
+         Else
+            m_sMessage &= vbCrLf & sItems(Index)
+         End If
+      Next
+      LicenseMsgTxBl.Text = m_sMessage
+   End Sub
+
+   Public Sub Exit_Click() Handles ExitBtn.Click
+      Me.Close()
+   End Sub
+
+End Class

Machine/AlarmsPageUC.xaml

@@ -184,6 +184,31 @@
 
                </GroupBox>
 
+               <!--Parametri rettifica tagli sottosquadra: 1 Parametro -->
+               <GroupBox Name="RectificationWJParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="2" >
+                   <Grid Grid.Column="3" Grid.Row="2">
+                       <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="2*"/>
+                       </Grid.ColumnDefinitions>
+                       <Grid.RowDefinitions>
+                           <RowDefinition Height="*"/>
+                       </Grid.RowDefinitions>
+
+                       <TextBlock Name="EnableRectificationTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                       <CheckBox Name="EnableRectificationChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                 HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                       <!--<TextBlock Name="OffsetRectificationTxBl" Grid.Row="1" Grid.Column="0" 
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                       <EgtWPFLib:EgtTextBox Name="OffsetRectificationTxBx" Grid.Row="1" Grid.Column="1" Margin="10,0,10,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>-->
+
+                   </Grid>
+
+               </GroupBox>
+
                <!--Parametri WaterJet: 5 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
                <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="4" 
                               Style="{DynamicResource OmagCut_GroupBox}">

Machine/AlarmsPageUC.xaml.vb

@@ -97,7 +97,10 @@ Public Class AlarmsPageUC
       HolesOffsetWJTxBl.Text = "Offset"
       MinRadiusWJTxBl.Text = "Min Radius"
       OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
-      '--  FINE  -- nuovi parametri per preforo lavello
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -175,6 +178,7 @@ Public Class AlarmsPageUC
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
             WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -354,7 +358,9 @@ Public Class AlarmsPageUC
       MinRadiusWJTxBx.Text = LenToString(dVal, 2)
       OneHoleInCornerWJChBx.IsChecked =
          (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
-
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -970,9 +976,18 @@ Public Class AlarmsPageUC
          WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
       End If
    End Sub
-
    ' --   FINE   -- nuovi parametri per prefori WaterJet
 
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -1178,6 +1193,7 @@ Public Class AlarmsPageUC
       Dim dToolDiam As Double = 0
       Dim dToolThick As Double = 0
       Dim dToolLen As Double = 0
+      Dim dCore As Double = 0
       Dim sToolParam As String = String.Empty
       EgtTdbGetCurrToolParam(MCH_TP.HEAD, sToolParam)
       EgtLuaSetGlobStringVar("CMD.HEAD", sToolParam)
@@ -1189,6 +1205,14 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore)
+      EgtLuaSetGlobNumVar("CMD.CORE", dCore * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1241,7 +1265,7 @@ Public Class AlarmsPageUC
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
       ' Creo MsgBox di attesa
-      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_DIRECTCUTPAGEUC + 41), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
+      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, String.Format(EgtMsg(MSG_DIRECTCUTPAGEUC + 41), ToolForProbing.m_ToolName), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
       m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
       ' Definisco flag tastatura
       Dim bProbingOk As Boolean = False

Machine/CurrentMachine.vb

@@ -1,6 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.IO
 
 Public Class CurrentMachine
 
@@ -51,6 +52,10 @@ Public Class CurrentMachine
    Private m_sProdLiProbingState2Var As String = ""
    Private m_sProdLiProbingTcPos2Var As String = ""
    Private m_sProdLiSawDiameter2Var As String = ""
+   Private m_sClickState As String = "E80028"
+   Private m_sClickDir As String = ""
+   ' Gestione speciale per canali CN
+   Private m_sExtFileCN As String = ".0"
 
    ' Numero e tipo di utensili correntemente disponibili sulla macchina
    Private m_MountedToolConfig As MountedToolConfigs = MountedToolConfigs.SAW
@@ -134,6 +139,8 @@ Public Class CurrentMachine
    Private m_dPhotoOffsetY As Double = 0
    Private m_dTab2PhotoOffsetX As Double = 0
    Private m_dTab2PhotoOffsetY As Double = 0
+   Private m_dHQPhotoOffsetX As Double = 0
+   Private m_dHQPhotoOffsetY As Double = 0
 
    ' Abilitazione scelta restart
    Private m_bEnableRestart As Boolean = False
@@ -194,8 +201,15 @@ Public Class CurrentMachine
    ' Massimo numero di utensili su Tc manuale
    Friend MAX_TCMAN_TOOLS As Integer = 60
 
+   ' Massima profondità lavorabile nei tagli diretti
+   Private m_MaxTabDepth As Double = 10.0
 
 #Region "Proprietà che leggono e scrivono i valori anche da o su file ini"
+   Friend ReadOnly Property MaxTabDepth As Double
+      Get
+         Return m_MaxTabDepth
+      End Get
+   End Property
 
    Friend ReadOnly Property sMachineName As String
       Get
@@ -316,7 +330,7 @@ Public Class CurrentMachine
          Return m_bAskNewOnResend
       End Get
    End Property
-   
+
 
    Friend ReadOnly Property nProdLiSawProbe As Integer
       Get
@@ -324,6 +338,24 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property sClickState As String
+      Get
+         Return m_sClickState
+      End Get
+   End Property
+
+   Friend ReadOnly Property sClickDir As String
+      Get
+         Return m_sClickDir
+      End Get
+   End Property
+
+   Friend ReadOnly Property sExtFileCN As String
+      Get
+         Return m_sExtFileCN
+      End Get
+   End Property
+
    Friend Function sProdLiProbingStateVar(nI As Integer) As String
       If nI = 1 Then Return m_sProdLiProbingStateVar
       If nI = 2 Then Return m_sProdLiProbingState2Var
@@ -734,6 +766,10 @@ Public Class CurrentMachine
       Set(value As String)
          If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, value, sMachIniFile) Then
             m_sCurrWaterJetting = value
+            If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+               m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            End If
+
          End If
       End Set
    End Property
@@ -788,7 +824,7 @@ Public Class CurrentMachine
                      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
                   End If
                End If
-                  Case 2
+            Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
@@ -830,6 +866,10 @@ Public Class CurrentMachine
             Case 2
                Return New Vector3d(m_dTab2PhotoOffsetX, m_dTab2PhotoOffsetY, 0)
             Case Else
+               ' verifico quale delle due fotocamere è attualmente attiva
+               If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+                  Return New Vector3d(m_dHQPhotoOffsetX, m_dHQPhotoOffsetY, 0)
+               End If
                Return New Vector3d(m_dPhotoOffsetX, m_dPhotoOffsetY, 0)
          End Select
       End Get
@@ -1120,6 +1160,8 @@ Public Class CurrentMachine
       m_sMachIniFile = m_MainWindow.GetMachinesRootDir & "\" & sMachineName & "\" & sMachineName & ".ini"
       ' Leggo estensione del file programma pezzo
       GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, "xpi", m_sIsoFileExt, sMachIniFile)
+      ' per gestione canali separati (macchina NUM con più di 5 Assi) ver. 2.5g1
+      GetPrivateProfileString(S_PARTPROGRAM, K_EXTFILECN, ".0", m_sExtFileCN, sMachIniFile)
       If m_sIsoFileExt(0) <> "." Then m_sIsoFileExt = "." & m_sIsoFileExt
       ' Leggo flag incremento asse C
       m_dDeltaC = GetPrivateProfileDouble(S_AXES, K_DELTA_C, 0.0, sMachIniFile)
@@ -1153,6 +1195,13 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLIPROBINGTCPOS2VAR, "0", m_sProdLiProbingTcPos2Var, sMachIniFile)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLISAWDIAMETER2VAR, "", m_sProdLiSawDiameter2Var, sMachIniFile)
 
+      GetPrivateProfileString(S_POLISHLINE, K_CLICKSTATE, "", m_sClickState, sMachIniFile)
+      GetPrivateProfileString(S_POLISHLINE, k_CLICKDIR, "", m_sClickDir, sMachIniFile)
+      If Not Directory.Exists(m_sClickDir) Then
+         m_sClickState = ""
+         EgtOutLog("Directory " & m_sClickDir & " does not exist")
+      End If
+
       ' Leggo configurazione degli utensili in macchina
       m_MountedToolConfig = GetPrivateProfileInt(S_TOOLS, K_MOUNTEDTOOLCONFIG, 0, sMachIniFile)
       ' Leggo flag presenza tipologie utensili
@@ -1293,6 +1342,8 @@ Public Class CurrentMachine
       m_dPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_OFFSETY, 0, sMachIniFile)
       m_dTab2PhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETX, 0, sMachIniFile)
       m_dTab2PhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETY, 0, sMachIniFile)
+      m_dHQPhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETX, 0, sMachIniFile)
+      m_dHQPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETY, 0, sMachIniFile)
 
       ' Leggo abilitazione per restart
       m_bEnableRestart = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENABLERESTART, 0, sMachIniFile) <> 0)
@@ -1360,6 +1411,12 @@ Public Class CurrentMachine
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
+
+      ' affonadamento massimo oltre la tavola (inidicata in positivo!)
+      m_MaxTabDepth = GetPrivateProfileDouble(S_MACH_NEST, "MaxTabDepth", 10.0, m_MainWindow.GetMachIniFile())
+      If m_MaxTabDepth < 0 Then
+         m_MaxTabDepth = 10.0
+      End If
    End Sub
 
    ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
@@ -1605,7 +1662,9 @@ Public Class CurrentMachine
       Dim dToolDiam As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam)
       ' Confronto con massimo ammesso
-      Return (dToolDiam <= dMaxSawDiamForProbe)
+      Dim bOk As Boolean = dToolDiam <= dMaxSawDiamForProbe
+      If Not bOk Then EgtOutLog("WARNING: Saw diameter to big for probing")
+      Return bOk
    End Function
 
    Friend Function GetPrivateProfileMaterial(

Machine/MachineCNPageUC.xaml

@@ -7,110 +7,123 @@
    mc:Ignorable="d" 
    d:DesignHeight="768" d:DesignWidth="1280">
 
-   <!-- Definizione della ImportPage -->
-   <Border Background="{DynamicResource OmagCut_Gray}" >
+    <!-- Definizione della ImportPage -->
+    <Border Background="{DynamicResource OmagCut_Gray}" >
 
-      <Grid Name="ImportPageGrid">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="7.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="4.5*"/>
-         </Grid.RowDefinitions>
+        <Grid Name="ImportPageGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="7.5*"/>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="4.5*"/>
+            </Grid.RowDefinitions>
 
-         <GroupBox Name="CNModeGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.ColumnSpan="2" Margin="0,0,4,0">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
+            <GroupBox Name="CNModeGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.ColumnSpan="2" Margin="0,0,4,0">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
 
-               <ToggleButton Name="AutoBtn" Grid.Column="0"
+                    <ToggleButton Name="AutoBtn" Grid.Column="0"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="ManualBtn" Grid.Column="1"
+                    <ToggleButton Name="ManualBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="MDIBtn" Grid.Column="2"
+                    <ToggleButton Name="MDIBtn" Grid.Column="2"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="SingleBtn" Grid.Column="3"
+                    <ToggleButton Name="SingleBtn" Grid.Column="3"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="HomeBtn" Grid.Column="4"
+                    <ToggleButton Name="HomeBtn" Grid.Column="4"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
+            <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
 
-               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="StopBtn" Grid.Column="1"
+                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+                    <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ResetBtn" Grid.Column="2"
+                    <Button Name="ResetBtn" Grid.Column="2"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
             <GroupBox Name="MDICommandGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="1">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="6*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="6*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
 
                     <EgtWPFLib:EgtTextBox Name="MDITxBx" Margin="10,0,10,0" Style="{DynamicResource OmagCut_MDIKeyboardTextBox}"/>
-               <Button Name="MDIConfirmBtn" Grid.Column="1" 
+                    <Button Name="MDIConfirmBtn" Grid.Column="1" 
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
+            <GroupBox Name="CameraHQ" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="1" Grid.Column="2" Grid.ColumnSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <ToggleButton Name="CameraHQBtn" Grid.Column="2"
+                                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                                  Foreground="White"/>
+                </Grid>
+            </GroupBox>
+
+            <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
             Grid.ColumnSpan="3">
-            <Grid>
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-            </Grid.ColumnDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
 
-               <Button Name="DownloadBtn" Grid.Column="0"
+                    <Button Name="DownloadBtn" Grid.Column="0"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="UploadBtn" Grid.Column="1"
+                    <Button Name="UploadBtn" Grid.Column="1"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ActivateBtn" Grid.Column="2"
+                    <Button Name="ActivateBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="DeleteBtn" Grid.Column="3"
+                    <Button Name="DeleteBtn" Grid.Column="3"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <EgtWPFLib:EgtTextBox Name="DULoadTxBx" Grid.Column="4" Width="100" Text="900.0"
+                    <EgtWPFLib:EgtTextBox Name="DULoadTxBx" Grid.Column="4" Width="100" Text="900.0"
                   Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
-            </Grid>
-         </GroupBox>
+                </Grid>
+            </GroupBox>
 
             <GroupBox Name="PowerGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
             Grid.Column="3" Grid.ColumnSpan="3" Margin="5,0,0,0">
@@ -131,18 +144,18 @@
             </GroupBox>
 
             <GroupBox Name="ErrorLstGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="3" Grid.ColumnSpan="4">
-            <ListBox Name="ErrorLstBx">
-               <ListBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ListBox.ItemTemplate>
-            </ListBox>
+                <ListBox Name="ErrorLstBx">
+                    <ListBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ListBox.ItemTemplate>
+                </ListBox>
 
-         </GroupBox>
+            </GroupBox>
 
-      </Grid>
+        </Grid>
 
-   </Border>
+    </Border>
 
 </UserControl>

Machine/MachineCNPageUC.xaml.vb

@@ -29,6 +29,7 @@ Public Class MachineCNPageUC
       MDICommandGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 16)
       PartProgTransferGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 17)
       ErrorLstGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 12)
+
       ' Attivo gruppo PartProgTransferGpBx leggendo la variabile nel file ini
       If GetPrivateProfileInt(S_GENERAL, K_TESTINGPAGE, 0, m_MainWindow.GetIniFile()) = 1 Then
          PartProgTransferGpBx.Visibility = Windows.Visibility.Visible
@@ -44,6 +45,28 @@ Public Class MachineCNPageUC
       Else
          PowerGpBx.Visibility = Visibility.Collapsed
       End If
+
+      ' verifico che sia attiva la modalità per l'uso di due fotocamere
+      If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+         CameraHQ.Visibility = Visibility.Visible
+         CameraHQ.Header = "Photo on table"
+         CameraHQBtn.Content = "HQ"
+         ' verifico quale camera è impostata
+         If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+            CameraHQBtn.IsChecked = True
+            If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+               m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1HQ.png", UriKind.Relative))
+            End If
+         Else
+            CameraHQBtn.IsChecked = False
+            If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+               m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1.png", UriKind.Relative))
+            End If
+         End If
+      Else
+         CameraHQ.Visibility = Visibility.Collapsed
+      End If
+
    End Sub
 
    Private Sub TestingPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -203,6 +226,20 @@ Public Class MachineCNPageUC
       m_CN.DGeneralFunctions_WriteCncMode(8)
    End Sub
 
+   Private Sub CameraHQBtn_Click(sender As Object, e As RoutedEventArgs) Handles CameraHQBtn.Click
+      Dim sEnableHQ As String = If(CameraHQBtn.IsChecked, "1", "0")
+      WritePrivateProfileString(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, sEnableHQ, m_MainWindow.GetMachIniFile())
+      If CameraHQBtn.IsChecked Then
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+            m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1HQ.png", UriKind.Relative))
+         End If
+      Else
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+            m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1.png", UriKind.Relative))
+         End If
+      End If
+   End Sub
+
    Private Sub MDITxBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MDITxBx.KeyDown
       If e.Key = Key.Return Then
          ' leggo se stato reset

Machine/MachineStatusUC.xaml.vb

@@ -279,6 +279,12 @@ Public Class MachineStatusUC
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      Else
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      End If
       'Feed = DoubleToString(dRealFeed, 0)
       FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
@@ -302,8 +308,16 @@ Public Class MachineStatusUC
       Dim dSpindleOvr As Double
       ' se attivi nuovi comandi MDI su siemens
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
-         dSpindlePower = m_CN.d_data(0)
-         dSpindleOvr = m_CN.d_data(1)
+
+         If m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
+            dSpindlePower = m_CN.d_spindle_power
+            'dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)
+            dSpindleOvr = m_CN.bPowerOvr
+         Else
+            ' questo sistema è deprecabile dalla versione 2.6d2 (nuova gestione dei vettori)
+            dSpindlePower = m_CN.d_data(0)
+            dSpindleOvr = m_CN.d_data(1)
+         End If
       ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
          dSpindlePower = m_CN.d_spindle_power / 1000
       Else

Machine/MachiningDbPageUC.xaml.vb

@@ -61,7 +61,7 @@ Public Class MachiningDbPageUC
       StepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39), EgtMsg(MSG_COMBOBOXPARAM + 40)}
       RouFinStepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39)}
       ExtCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(MSG_COMBOBOXPARAM + 45)}
-      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44)}
+      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(90852)}
 
       ' Assegno array a combobox
       WorkSideCmBx.ItemsSource = WorkSide
@@ -208,7 +208,7 @@ Public Class MachiningDbPageUC
       MillTool.Clear()
       bFound = EgtTdbGetFirstTool(MCH_TF.MILL, sToolName, nType)
       While bFound
-         If nType = MCH_TY.MILL_STD Then MillTool.Add( sToolName)
+         If nType = MCH_TY.MILL_STD And sToolName.Trim.ToLower <> "probe" Then MillTool.Add(sToolName)
          bFound = EgtTdbGetNextTool(MCH_TF.MILL, sToolName, nType)
       End While
       PocketTool.Clear()

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

Machine/ToolsDbPageUC.xaml.vb

@@ -695,7 +695,16 @@ Public Class ToolsDbPageUC
       Dim ToolName As String = String.Empty
       Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         Dim nDebug As Integer = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
+         If nType = nTType Then
+            If nTType <> MCH_TY.MILL_STD Then
+               ' se utensile diverso da MILL
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            ElseIf nTType = MCH_TY.MILL_STD And (ToolName.Trim.ToLower <> "probe" Or nDebug > 4) Then
+               ' Se utensile MILL con nome "probe" aggiungo solo se livello debug maggiore di 4
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            End If
+         End If
          bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
       ToolsList.Add(ToolCathegory)

MainWindow.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <Border Name="LogoBrd" Background="Transparent">
-                <Image Source="{DynamicResource LogoOmagImg}" Stretch="Uniform" Margin="1"/>
+                <Image Source="../Resources/NewIcons/Logo-Egalware (2).png" Stretch="Uniform" Margin="1"/>
          </Border>
 
          <!-- ** Definizione della Grid delle tab ** -->
@@ -53,7 +53,7 @@
             </ToggleButton>
          </Grid>
 
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
+         <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
    

MainWindow.xaml.vb

@@ -23,6 +23,9 @@ Class MainWindow
    ' Coefficiente di scalatura della finestra rispetto a standard
    Friend m_dMWinScale As Double = 1
 
+   ' Variabile che definisce l'avvio forzato in modalità FRAME
+   Friend m_OnlyFrame As Boolean = False
+
    ' Dichiarazione delle Page UserControl
    Friend m_WorkInProgressPageUC As WorkInProgressPageUC
    Friend m_CurrentProjectPageUC As CurrentProjectPageUC
@@ -100,6 +103,8 @@ Class MainWindow
       OFFICE_TYPE = 2 ^ 19                '  524288
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
+      COMPOFRAME = 2 ^ 22                 ' 4194304
+      CUT_LIGHT = 2 ^ 23                  ' 8388608
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -323,15 +328,30 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
-      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
-      EgtSetNetHwKey( bNetHwKey)
+      Dim bNetHwKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetHwKey)
+
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString(S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty(sLockId) Then
+         EgtSetLockId(sLockId)
+      End If
+
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2504, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2504, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2610, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2610, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
+      ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
+      If Not bProd Then
+         m_OnlyFrame = GetKeyOption(KEY_OPT.CUT_LIGHT)
+      End If
+
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
       m_sVersion = My.Application.Info.Version.Major.ToString() & "." &
@@ -439,8 +459,9 @@ Class MainWindow
 
       ' abilito il bottone per la gestione del comando di Check-Up-Start (posziona lama prelavorazione)
       If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
-         Not File.Exists( m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
+         Not File.Exists(m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
+         EgtOutLog("Warning: Missing file 'TestWork.lua' in folder 'DirectCmd', buttun 'TEST' collapsed!")
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
       End If
@@ -553,14 +574,14 @@ Class MainWindow
 
                ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
                EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
-                  Dim sIdKey As String = String.Empty
-                  EgtGetKeyInfo(sIdKey)
-                  EgtPHOTOLib.MainData.SetKey(sIdKey)
-               End If
+               Dim sIdKey As String = String.Empty
+               EgtGetKeyInfo(sIdKey)
+               EgtPHOTOLib.MainData.SetKey(sIdKey)
             End If
+         End If
       End If
       ' --------------------------------- SLAB DB -------------------------------------------------------
-
+      ExitBtn.ToolTip = "Exit" & vbCrLf & "Minimize (Shift)"
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -633,6 +654,31 @@ Class MainWindow
       m_IdleTimer.Interval = TimeSpan.FromMilliseconds(100)
       m_IdleTimer.Start()
 
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         ElseIf nAssLeftDays > 0 Then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+
+      ' Or nAssLeftDays = 358
+      If (nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28 Then
+         Dim sMsg As String = EgtMsg(91141)   ' Assistenza in scadenza /nContattare assistenza:/n
+         Dim sAssistance As String = String.Empty
+         GetPrivateProfileString(S_GENERAL, "Assistances", "", sAssistance, GetIniFile)
+         Dim sItems As String() = sAssistance.Split(","c)
+         For Each Item As String In sItems
+            sMsg &= " → " & Item.Trim & " /n"
+         Next
+         Dim MyLicWn As New LicenseWindow(Me, sMsg, "Assistance " & sAssStatus)
+         MyLicWn.Show()
+      End If
+
       ' inizilizzo
    End Sub
 
@@ -997,6 +1043,16 @@ Class MainWindow
       ' Se già visualizzato errore, lo nascondo
       If m_CurrentProjectPageUC.OutMessageBrd.IsMouseOver Then
          m_CurrentProjectPageUC.ClearMessage()
+         ' se è premuto il pulsante Shift allora provvedo ad aprire il file di Log
+         If Keyboard.Modifiers And ModifierKeys.Shift Then
+            ' Genero file CNC (lancio anche se errore in precedenza)
+            Dim sTemoDirect As String = GetTempDir() & "\OmagCUTLog.txt"
+            Try
+               Process.Start("Notepad.exe", sTemoDirect)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End If
       ' Condizioni che impediscono di clickare fuori dalla calcolatrice o tastiera quando una di queste è aperta
       If EgtWPFLib.EgtCalculator.GetbIsActive Then
@@ -1087,9 +1143,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
-      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      ' Inizio la chiusura del programma (se NUM_OLD verifico di aver terminato il processo DripFeed)
       EgtOutLog("Iniziato processo di chiusura programma")
-      m_IsClosingApplication = 1
+      m_IsClosingApplication = If(m_CNCommunication.m_nNCType = 1, 1, 2)
       Dim nCount As Integer = 0
       While m_IsClosingApplication <> 2
          If nCount > 5 Then
@@ -1216,7 +1272,7 @@ Class MainWindow
    Private Sub MainWindow_ContentRendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
       ' Verifico presenza del collegamento al CN
       m_bNCLink = (GetPrivateProfileInt(S_GENERAL, K_CNLINK, 0, m_sIniFile) <> 0) And
-                  Not GetKeyOption( KEY_OPT.OFFICE_TYPE)
+                  Not GetKeyOption(KEY_OPT.OFFICE_TYPE)
       m_CNCommunication.CNCommunication_Initialization()
       ' Se linea di produzione abilitata e collegata, lancio relativo timer
       If m_bNCLink And m_CurrentMachine.bProdLine Then
@@ -1226,11 +1282,17 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      If m_OnlyFrame Then
+         m_ActivePage = MainWindow.Pages.FrameCut
+      Else
+         m_ActivePage = MainWindow.Pages.CadCut
+      End If
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Friend Sub EgtWPFInit()
@@ -1262,8 +1324,34 @@ Class MainWindow
       Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
       EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
-      CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      If m_OnlyFrame Then
+         If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+            m_ActivePage <> Pages.RawPart And m_ActivePage <> Pages.DirectCut And m_ActivePage <> Pages.Simulation Then
+            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91142), EgtMsg(91143), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPreNewProject()
+            ' Cancello progetto salvato con nome da file ini
+            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", GetIniFile())
+            ' Scelta tavola della macchina
+            Dim nTabInd As Integer = m_CadCutPageUC.m_ProjectMgr.ChooseTable()
+            ' Creo nuovo progetto
+            m_CurrentProjectPageUC.NewProject(nTabInd, False)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
+            FrameCutBtn_Click(Nothing, Nothing)
+            CadCutBtn.IsEnabled = False
+         Else
+            FrameCutBtn.IsEnabled = True
+            CadCutBtn.IsEnabled = False
+            ' Attivo il pulsante FRAME
+            'FrameCutBtn.IsChecked = True
+            'CadCutBtn.IsChecked = False
+         End If
+      Else
+         CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
+         FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      End If
+
       ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
@@ -1292,7 +1380,9 @@ Class MainWindow
          m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjFinished, 1)
          Dim nVarFin As Integer = 0
          For I As Integer = 1 To 4
-            System.Threading.Thread.Sleep(50)
+            If Not m_CurrentMachine.bDemo Then
+               System.Threading.Thread.Sleep(50)
+            End If
             If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
                nVarFin = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
                Exit For
@@ -1305,11 +1395,11 @@ Class MainWindow
             ' Salvo in INI indice del progetto terminato
             WritePrivateProfileString(S_GENERAL, K_LASTPROJFINISHED, nVarFin.ToString("D4"), GetIniFile())
             ' Salvo in INI data e ora attuali di termine lavorazione del progetto (solo gli ultimi 10 tramite modulo)
-            Dim sKey As String = K_DATETIMEFINISHED & "." & ( nVarFin Mod 10).ToString() 
+            Dim sKey As String = K_DATETIMEFINISHED & "." & (nVarFin Mod 10).ToString()
             Dim sDateTime As String = My.Computer.Clock.LocalTime.ToString("dd.MM.yyyy HH\:mm\:ss")
             WritePrivateProfileString(S_GENERAL, sKey, sDateTime, GetIniFile())
             ' Eseguo script
-            ExecFinishedProgScript( nVarFin, sDateTime)
+            ExecFinishedProgScript(nVarFin, sDateTime)
          End If
       End If
       ' Se OmagVIEW blocca, esco (riproverò al prossimo giro)
@@ -1345,16 +1435,18 @@ Class MainWindow
       ' Se richieste modalità standard o speciali
       If m_CurrentMachine.nSaveProduced <> 3 Then
          StandardAndSpecialViewFileManagement()
-      ' altrimenti modalità custom
+         ' altrimenti modalità custom
       Else
-         CustomViewFileManagement( nProjInd)
+         CustomViewFileManagement(nProjInd)
       End If
       ' Leggo variabile con indice progetto da copiare per OmagVIEW (standard E80025)
       m_CNCommunication.m_CN.n_DReadELS_handle = 0
       m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjCopy, 1)
       Dim nVarCopy As Integer = 0
       For I As Integer = 1 To 10
-         System.Threading.Thread.Sleep(50)
+         If Not m_CurrentMachine.bDemo Then
+            System.Threading.Thread.Sleep(50)
+         End If
          If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
             nVarCopy = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
             Exit For
@@ -1555,7 +1647,7 @@ Class MainWindow
                nNewProjInd -= 1
             End While
          End If
-      ' se altrimenti richiesto progetto successivo
+         ' se altrimenti richiesto progetto successivo
       ElseIf nMove > 0 Then
          nNewProjInd = nProjInd + 1
          If nProjInd > nLastProj Then
@@ -1656,7 +1748,7 @@ Class MainWindow
             Catch ex As Exception
                EgtOutLog("Error erasing " & sDestEplFile)
             End Try
-         ' altrimenti, ogni commessa ha il suo file dei pezzi rovinati
+            ' altrimenti, ogni commessa ha il suo file dei pezzi rovinati
          Else
             ' Sposto nel direttorio temporaneo
             Dim sDestEplFile = m_sTempDir & "\" & CURR_PROJ_EPL
@@ -1766,7 +1858,7 @@ Class MainWindow
       Return True
    End Function
 
-   Private Function CustomViewFileManagement( nProjInd As Integer) As Boolean
+   Private Function CustomViewFileManagement(nProjInd As Integer) As Boolean
       ' Se non esiste file EPL, esco
       Dim sSouEplFile As String = m_CurrentMachine.sLineDataDir & "\" & CURR_PROJ_EPL
       If Not My.Computer.FileSystem.FileExists(sSouEplFile) Then Return True
@@ -1805,7 +1897,7 @@ Class MainWindow
       ' Verifico progetto restituito da View
       If nProjInd = 0 Then nProjInd = nLastCopy
       ' Leggo variabile con data termine lavorazione
-      Dim sKey As String = K_DATETIMEFINISHED & "." & ( nProjInd Mod 10).ToString() 
+      Dim sKey As String = K_DATETIMEFINISHED & "." & (nProjInd Mod 10).ToString()
       GetPrivateProfileString(S_GENERAL, sKey, sDateTime, sDateTime, GetIniFile())
       ' Recupero direttorio per pezzi rovinati
       Dim sRuPartsDir As String = GetRuinedPartsDir()
@@ -1832,7 +1924,7 @@ Class MainWindow
       Return True
    End Function
 
-   Friend Function ExecSentProgScript( bDirectCut As Boolean, Optional bAlreadySent As Boolean = False) As Boolean
+   Friend Function ExecSentProgScript(bDirectCut As Boolean, Optional bAlreadySent As Boolean = False) As Boolean
       ' Verifico esistenza script
       Dim sLuaPath As String = m_CurrentMachine.sMachDir() & "\Scripts\SentProg.lua"
       If Not My.Computer.FileSystem.FileExists(sLuaPath) Then Return True
@@ -1851,8 +1943,8 @@ Class MainWindow
       End If
       EgtLuaResetGlobVar("SPS")
       If nErr <> 0 Then
-          EgtOutLog("Error in SentProg : " & nErr.ToString())
-          m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(90325))       'Errore nel salvataggio delle statistiche
+         EgtOutLog("Error in SentProg : " & nErr.ToString())
+         m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(90325))       'Errore nel salvataggio delle statistiche
       End If
       Return (nErr = 0)
    End Function
@@ -1934,15 +2026,15 @@ Class MainWindow
       End If
       ' Dichiaro progetto passato da View
       If nProjInd = m_CurrentProjectPageUC.GetCurrentProject() Then
-         EgtSetInfo( EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
       Else
          Dim nTmpCtx As Integer = EgtInitContext()
          If nTmpCtx <> 0 Then
             Dim sNgeFile As String = GetSaveDir() & "\" & nProjInd.ToString("D4") & ".nge"
-            EgtOpenFile( sNgeFile)
-            EgtSetInfo( EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
-            EgtSaveFile( sNgeFile, NGE.CMPTEXT)
-            EgtDeleteContext( nTmpCtx)
+            EgtOpenFile(sNgeFile)
+            EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
+            EgtSaveFile(sNgeFile, NGE.CMPTEXT)
+            EgtDeleteContext(nTmpCtx)
             EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
          End If
       End If
@@ -1976,21 +2068,21 @@ Class MainWindow
    ' Evento che apre AboutBox quando viene clickato il logo
    Private Sub LogoBrd_MouseDown(sender As Object, e As MouseButtonEventArgs) Handles LogoBrd.MouseDown
       ' Se non premuto Shift -> AboutBox
-      If ( Keyboard.Modifiers And ModifierKeys.Shift) = 0 Then  
-         Dim AboutBox As New AboutBoxWD( Me)
-      ' Altrimenti lancio cambio macchina (solo uso interno)
+      If (Keyboard.Modifiers And ModifierKeys.Shift) = 0 Then
+         Dim AboutBox As New AboutBoxWD(Me)
+         ' Altrimenti lancio cambio macchina (solo uso interno)
       Else
          If m_ActivePage = Pages.CadCut Or m_ActivePage = Pages.FrameCut Then
             ' Cambio macchina
-            EgtLuaCreateGlobTable( "CHM")
-            EgtLuaExecFile( GetConfigDir() & "\ChangeMachine.lua")
+            EgtLuaCreateGlobTable("CHM")
+            EgtLuaExecFile(GetConfigDir() & "\ChangeMachine.lua")
             Dim nRestart As Integer = 0
-            EgtLuaGetGlobIntVar( "CHM.RESTART", nRestart)
-            EgtLuaResetGlobVar( "CHM")
+            EgtLuaGetGlobIntVar("CHM.RESTART", nRestart)
+            EgtLuaResetGlobVar("CHM")
             ' Riavvio
             If nRestart = 1 Then
                Close()
-               Process.Start( Application.ResourceAssembly.Location)
+               Process.Start(Application.ResourceAssembly.Location)
             End If
          End If
       End If
@@ -2012,6 +2104,7 @@ Class MainWindow
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
       Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
    End Sub

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.4.3")>
-<Assembly: AssemblyFileVersion("2.5.4.3")>
+<Assembly: AssemblyVersion("2.6.10.1")>
+<Assembly: AssemblyFileVersion("2.6.10.1")>

NcComm/CNCommunication.vb

@@ -4,6 +4,8 @@ Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports System.IO
 Imports System.Text
+Imports EgtWPFLib.EgtMsgBox
+Imports OmagCUT.CN_generico
 
 Public Class CNCommunication
 
@@ -28,6 +30,9 @@ Public Class CNCommunication
    ' Oggetto CN
    Public WithEvents m_CN As CN_generico
 
+   ' NUOVO ! in fase di test
+   Private ListReferenceIndex As New List(Of RefereceFlagSimens)
+
    ' Flag di aggiornamento dati
    Private m_bNewPosData As Boolean = True
    Private m_bNewDeltaData As Boolean = True
@@ -133,6 +138,10 @@ Public Class CNCommunication
             Refresh()
          End If
 
+         If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sClickState) Then
+            ClickOnPolishLine()
+         End If
+
          m_bTimerBusy = False
          m_RefreshTimer.Start()
       Else
@@ -232,6 +241,17 @@ Public Class CNCommunication
       m_bInInches = (GetPrivateProfileInt(S_AXES, K_ININCHES, 0, m_MainWindow.GetMachIniFile()) <> 0)
    End Sub
 
+   Private Sub KillSimensCom(sProcessName As String)
+      Dim sAppName As String = Path.GetFileNameWithoutExtension(sProcessName)
+      Dim pList() As System.Diagnostics.Process = System.Diagnostics.Process.GetProcesses
+      For Each proc As System.Diagnostics.Process In pList
+         If proc.ProcessName.ToString = sAppName Then
+            proc.Kill()
+            EgtOutLog("ProcessKill : " & """" & sProcessName & """")
+         End If
+      Next
+   End Sub
+
    Private Sub InitCn()
 
       m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -267,6 +287,7 @@ Public Class CNCommunication
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
          GetPrivateProfileString(S_NCDATA, K_COMM, "XIP01, 0, 10, 0, 0, 0", sVal, m_MainWindow.GetMachIniFile())
+         EgtOutLog(" → Tipo di comunicazione: " & sVal)
          m_CN.SetCnDataVar(CN_generico.CnData.Comm, sVal)
          GetPrivateProfileString(S_NCDATA, K_REFRESH, "200", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.Refresh, sVal)
@@ -368,6 +389,9 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumOff, sVal)
          GetPrivateProfileString(S_NCDATA, K_BYPASSTATE, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
+         ' ver 2.6i1 : nuova gestione SiemensONE
+         GetPrivateProfileString(S_NCDATA, K_RESETSTATUS, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.ResetStatus, sVal)
 
          ' nuove variabili: stato dei nuovi pulsanti
          nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
@@ -385,7 +409,7 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-         ' Solo per controllo FANUNC
+         ' Solo per controllo FANUC
          GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
 
@@ -398,6 +422,10 @@ Public Class CNCommunication
          EgtOutLog("Error starting NC communication : " & ex.Message)
       End Try
 
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+      ' m_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+
       Select Case m_nNCType
          Case 0   'Debug
             m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -422,26 +450,137 @@ Public Class CNCommunication
                Try
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
                   Dim sArg As String = "-start """ & m_sCNSiemensPath & """"
+
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
+                  KillSimensCom(m_sCNSiemensHMIPath)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+
+                  EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
                   m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
-                     ' stati bottoni parte 1
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
-                     ' stati bottoni ventose
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac), VarType.TInteger, 1)
-                     'stati porte
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed), VarType.TInteger, 2)
-                     ' 
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
-                     ' stati bottoni parte 2
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.CBAxes), VarType.TInteger, 4)
-                     ' ampere e ampere override
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Spindle), VarType.TDouble, 0)
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
 
+                     ' Leggo tutte le varaibili che sono state caricate nel percorso [NcData] del file *.ini
+                     Dim nIndexArrayBool As Integer = 0
+                     Dim nIndexArrayInt As Integer = 0
+                     Dim nIndexArrayLong As Integer = 0
+                     Dim nIndexArrayDoub As Integer = 0
+                     Dim nIndexArrayStr As Integer = 0
+                     ' lista che associa Indice del vettore al nome (per associazioni Bit a Bit)
+                     Dim ListIndexToVar As New List(Of IndexArrayToBit)
+                     ' Creo un vettore che mi permetta di risalire a cosa contiene ogni vettore FLAG (di tipo Enum) 
+                     For ItemIndex As Integer = 0 To m_CN.m_szCnDataVar.Count - 1
+                        ' escludo i Flag 'Comm' e 'Refresh'
+                        If ItemIndex = CnData.Comm Or ItemIndex = CnData.Refresh Then
+                           Continue For
+                        End If
+                        If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(ItemIndex)) Then
+                           Dim sItem As String() = m_CN.m_szCnDataVar(ItemIndex).Split(","c)
+                           Dim nVarType As VarType = VarType.TInteger
+                           If sItem.Count > 1 Then
+                              If IsNumeric(sItem(0)) Then
+                                 Select Case CInt(sItem(0))
+                                    Case 0
+                                       If nIndexArrayBool > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TBoolean
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayBool)
+                                       Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayBool, ItemIndex, nVarType)
+                                       If sItem.Count = 3 Then
+                                          ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                          NewRefFlafSiemens.DefaultValue = sItem(2)
+                                       End If
+                                       ListReferenceIndex.Add(NewRefFlafSiemens)
+                                       nIndexArrayBool += 1
+                                    Case 1
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TInteger
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayInt)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt, ItemIndex, nVarType))
+                                       nIndexArrayInt += 1
+                                    Case 2
+                                       If nIndexArrayLong > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TLong
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayLong)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayLong, ItemIndex, nVarType))
+                                       nIndexArrayLong += 1
+                                    Case 3
+                                       If nIndexArrayDoub > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TDouble
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayDoub)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayDoub, ItemIndex, nVarType))
+                                       nIndexArrayDoub += 1
+                                    Case 4
+                                       If nIndexArrayStr > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TString
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayStr)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayStr, ItemIndex, nVarType))
+                                       nIndexArrayStr += 1
+                                    Case 5
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       ' verifico se devo riempire un vettore con bit
+                                       Dim sSubItem As String() = sItem(1).Split("."c)
+                                       ' //My. name. Is Bond._James Bond!
+                                       Dim sVarName = String.Join(".", sSubItem.Take(sSubItem.Length - 1)) ' //My. name. Is Bond
+                                       Dim sIndexBit = sSubItem.Last() ' //_James Bond!
+                                       If sSubItem.Count > 1 And IsNumeric(sIndexBit) Then
+                                          Dim bFound As Boolean = False
+                                          Dim nIndexArrayInt_1 As Integer = nIndexArrayInt
+                                          For Each VarSiemens As IndexArrayToBit In ListIndexToVar
+                                             If VarSiemens.sNameVar.Trim = sVarName.Trim Then
+                                                nIndexArrayInt_1 = VarSiemens.nIndex
+                                                bFound = True
+                                                Exit For
+                                             End If
+                                          Next
+                                          nVarType = VarType.TInteger
+                                          m_CN.DVariables_Read_Subscription(sVarName, nVarType, nIndexArrayInt_1)
+                                          Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit)
+                                          If sItem.Count = 3 Then
+                                             ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                             NewRefFlafSiemens.DefaultValue = sItem(2)
+                                          End If
+                                          ListReferenceIndex.Add(NewRefFlafSiemens)
+                                          If Not bFound Then
+                                             nIndexArrayInt += 1
+                                             ListIndexToVar.Add(New IndexArrayToBit(nIndexArrayInt_1, sVarName.Trim))
+                                          End If
+                                       Else
+                                          EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è inidicato il bit associato")
+                                       End If
+                                    Case Else
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TInteger
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayInt)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt, ItemIndex, nVarType))
+                                       nIndexArrayInt += 1
+                                 End Select
+                              End If
+                           Else
+                              EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è indicato il tipo (0→Bool,1→Int,2→Long,3→Double,4→String,5→Bit)")
+                           End If
+                        End If
+                     Next
+                     ' Attraverso la funzione "RefreshNoEvents" rileggo i dati caricati
+
+                     ' Recupero il perocorso delle variabili PLC
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+
                   ElseIf m_CN.m_IsActiveModeSubscription Then
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
@@ -499,6 +638,33 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub ClickOnPolishLine()
+      ' Se richiesto di scattare foto sulla linea di lucidatura
+      m_CN.n_DReadELS_handle = 0
+      m_CN.ReadEls_Add_Parameter(m_MainWindow.m_CurrentMachine.sClickState, 1)
+      Dim nClickState As Integer = 0
+      For I As Integer = 0 To 10
+         System.Threading.Thread.Sleep(50)
+         If m_CN.n_DReadELS_handle = 1 Then
+            nClickState = CInt(m_CN.d_DReadELS_value)
+            If nClickState = 1 Then
+               ' procedo a costruire un nuovo file nella cartella indicata in configurazione
+               Try
+                  Dim fs As FileStream = File.Create(m_MainWindow.m_CurrentMachine.sClickDir & "\NewClick.txt")
+                  ' chiudo il file creato
+                  fs.Close()
+                  ' Dichiaro di aver provveduto a comunicare di scattare la foto
+                  m_CN.DVariables_WriteVariables2(m_MainWindow.m_CurrentMachine.sClickState, "0")
+               Catch ex As Exception
+                  EgtOutLog("Error on PolishLine comunication: " & ex.ToString)
+               End Try
+            End If
+            Exit For
+         End If
+      Next
+
+   End Sub
+
    Private Sub Refresh()
 
       If m_bNewPosData Then
@@ -599,8 +765,8 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
-            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
-            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -654,6 +820,7 @@ Public Class CNCommunication
             End If
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.HomeStateChanged(m_CN.bHomeState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
@@ -941,6 +1108,68 @@ Public Class CNCommunication
       'Laser = 16384
    End Enum
 
+#Region "MASCHERA per conttrollo Bit a Bit"
+   <Flags()>
+   Public Enum Mask As Integer
+      bit_Err = -1
+      bit_0 = &H1       ' 1
+      bit_1 = &H2       ' 2
+      bit_2 = &H4       ' 4
+      bit_3 = &H8       ' 8
+      bit_4 = &H10      ' 16
+      bit_5 = &H20      ' 32
+      bit_6 = &H40      ' 64
+      bit_7 = &H80      ' 128
+      bit_8 = &H100     ' 256
+      bit_9 = &H200     ' 512
+      bit_10 = &H400     ' 1024
+      bit_11 = &H800     ' 2048
+      bit_12 = &H1000    ' 4096
+      bit_13 = &H2000    ' 8192
+      bit_14 = &H4000    ' 16384
+      bit_15 = &H8000    ' 32768
+   End Enum
+
+   Public Function GetMaskByBit(IndexBit As Integer) As Mask
+      Dim Bit_ As Mask = Mask.bit_Err
+      Select Case IndexBit
+         Case 0
+            Bit_ = Mask.bit_0
+         Case 1
+            Bit_ = Mask.bit_1
+         Case 2
+            Bit_ = Mask.bit_2
+         Case 3
+            Bit_ = Mask.bit_3
+         Case 4
+            Bit_ = Mask.bit_4
+         Case 5
+            Bit_ = Mask.bit_5
+         Case 6
+            Bit_ = Mask.bit_6
+         Case 7
+            Bit_ = Mask.bit_7
+         Case 8
+            Bit_ = Mask.bit_8
+         Case 9
+            Bit_ = Mask.bit_9
+         Case 10
+            Bit_ = Mask.bit_10
+         Case 11
+            Bit_ = Mask.bit_11
+         Case 12
+            Bit_ = Mask.bit_12
+         Case 13
+            Bit_ = Mask.bit_13
+         Case 14
+            Bit_ = Mask.bit_14
+         Case 15
+            Bit_ = Mask.bit_15
+      End Select
+      Return Bit_
+   End Function
+#End Region    ' Maschera per controllo Bit a Bit
+
    Public Function IsSetAll(value As Integer, flag As Integer) As Boolean
       ' somma Bit a Bit
       Return ((value And flag) = flag)
@@ -956,23 +1185,23 @@ Public Class CNCommunication
 
       m_MachineStatus.DisplaySpeed()
 
-      m_MachineStatus.DisplayPower()
+      'm_MachineStatus.DisplayPower()
 
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
 
-      If m_nCountRefresh > 10 Then
-         Dim TempCurrMode As Short = m_CN.read_active_mode()
-         'EgtOutLog("Machine status: " & TempCurrMode)
-         If TempCurrMode <> m_nCurrMode Then
-            'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
-            m_nCurrMode = CInt(TempCurrMode)
-            m_MachineStatus.DisplayActiveMode(m_nCurrMode)
-         End If
-         m_nCountRefresh = 0
-      Else
-         m_nCountRefresh = m_nCountRefresh + 1
-      End If
+      'If m_nCountRefresh > 10 Then
+      '   Dim TempCurrMode As Short = m_CN.read_active_mode()
+      '   'EgtOutLog("Machine status: " & TempCurrMode)
+      '   If TempCurrMode <> m_nCurrMode Then
+      '      'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+      '      m_nCurrMode = CInt(TempCurrMode)
+      '      m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+      '   End If
+      '   m_nCountRefresh = 0
+      'Else
+      '   m_nCountRefresh = m_nCountRefresh + 1
+      'End If
 
       If m_CN.b_NC_error Then
          ErrorList.Clear()
@@ -989,61 +1218,176 @@ Public Class CNCommunication
          End If
       End If
 
+      ' lettura delle variabili abbonate
       If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
 
-         ' lettura variabili stati mancanti su Siemens
-         Dim nVarValue As Integer = m_CN.n_data(0)
-         EgtOutLog("Variabile PLC control addr: " & 1 & " value: " & nVarValue)
-         m_CN.bSpindleState = IsSetAll(nVarValue, ControlStates.Spindle)
-         m_CN.bLaserTracState = IsSetAll(nVarValue, ControlStates.LaserTrac)
-         m_CN.bCoolantState = IsSetAll(nVarValue, ControlStates.Coolant)
-         m_CN.bInternalCoolantState = IsSetAll(nVarValue, ControlStates.InternalCoolant)
-         m_CN.bExternCoolantState = IsSetAll(nVarValue, ControlStates.ExternCoolant)
-         m_CN.bCBAxesState = IsSetAll(nVarValue, ControlStates.CAxis)
-         m_CN.bAirBlowState = IsSetAll(nVarValue, ControlStates.AirBlow)
-         m_CN.bHomeState = IsSetAll(nVarValue, ControlStates.Home)
-         m_CN.bTableUpState = IsSetAll(nVarValue, ControlStates.TableUp)
-         m_CN.bTableDownState = IsSetAll(nVarValue, ControlStates.TableDown)
-         m_CN.bLimitZState = IsSetAll(nVarValue, ControlStates.LimitZ)
-         m_CN.b5AxesState = IsSetAll(nVarValue, ControlStates.Axis5)
+         '------------ SINUMERIK ONE ----------------------------------------------
+         For IndxLst As Integer = 0 To ListReferenceIndex.Count - 1
+            Dim nType As Integer = ListReferenceIndex(IndxLst).TypeArray
+            Dim nFlag As Integer = ListReferenceIndex(IndxLst).FlagIndex
+            Dim nIndex As Integer = ListReferenceIndex(IndxLst).SiemnesArrayIndex
+            Dim nIndexBit As Integer = ListReferenceIndex(IndxLst).IndexBit
+            Dim sDefaultValue As String = ListReferenceIndex(IndxLst).DefaultValue
+            Dim b_temp As Boolean = False
+            Dim n_temp As Integer = 0
+            Dim l_temp As Long = 0.0
+            Dim d_temp As Double = 0.0
+            ' leggo il valore caricato 
+            Select Case nType
+               Case VarType.TBoolean
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default boolean value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = m_CN.b_data(nIndex)
+                     End Try
+                  Else
+                     b_temp = m_CN.b_data(nIndex)
+                  End If
+               Case VarType.TInteger
+                  n_temp = m_CN.n_data(nIndex)
+                  ' VENTOSE: lettura dato da intero Bit a Bit (ver_2.6h1), ritorno un Boolean
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default bit value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = ReadBit(nIndexBit, n_temp)
+                     End Try
+                  Else
+                     b_temp = ReadBit(nIndexBit, n_temp)
+                  End If
+               Case VarType.TLong
+                  l_temp = m_CN.l_data(nIndex)
+               Case VarType.TDouble
+                  d_temp = m_CN.d_data(nIndex)
+               Case VarType.TString
+                  'b_temp = If(m_CN.d_data(nIndex) = 0, True, False)
+            End Select
 
-         nVarValue = m_CN.n_data(1)
-         'EgtOutLog("Variabile PLC vacuum  addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac) & " value: " & nVarValue)
-         m_CN.bVacuumUp = IsSetAll(nVarValue, VacuumStates.VacuumUp)
-         m_CN.bVacuumDown = IsSetAll(nVarValue, VacuumStates.VacuumDown)
-         m_CN.bVacuum2Up = IsSetAll(nVarValue, VacuumStates.Vacuum2Up)
-         m_CN.bVacuum2Down = IsSetAll(nVarValue, VacuumStates.Vacuum2Down)
-         m_CN.bVacuum1State = IsSetAll(nVarValue, VacuumStates.Vacuum1State)
-         m_CN.bVacuum2State = IsSetAll(nVarValue, VacuumStates.Vacuum2State)
-         m_CN.bVacuum3State = IsSetAll(nVarValue, VacuumStates.Vacuum3State)
-         m_CN.bVacuum4State = IsSetAll(nVarValue, VacuumStates.Vacuum4State)
-         m_CN.bVacuum5State = IsSetAll(nVarValue, VacuumStates.Vacuum5State)
-         m_CN.bVacuum6State = IsSetAll(nVarValue, VacuumStates.Vacuum6State)
-         m_CN.bOpenAllState = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State And m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         m_CN.bCloseAllState = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State And Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         m_CN.bOpen123State = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State)
-         m_CN.bOpen456State = (m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         m_CN.bClose123State = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State)
-         m_CN.bClose456State = (Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         m_CN.bBlowState = IsSetAll(nVarValue, VacuumStates.AirBlow)
-         m_CN.bVacuumOn = IsSetAll(nVarValue, VacuumStates.VacuumOn)
-         m_CN.bVacuumOff = IsSetAll(nVarValue, VacuumStates.VacuumOff)
-         m_CN.bBypassState = IsSetAll(nVarValue, VacuumStates.BypassState)
+            Select Case nFlag
+               Case CN_generico.CnData.Mode    ' (0) Stato modo attivo
+                  m_CN.n_index_mode = nIndex
+                  If m_nCountRefresh > 10 Then
+                     Dim TempCurrMode As Short = m_CN.read_active_mode()
+                     'EgtOutLog("Machine status: " & TempCurrMode)
+                     If TempCurrMode <> m_nCurrMode Then
+                        'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+                        m_nCurrMode = CInt(TempCurrMode)
+                        m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+                        m_CN.nMachineMode = m_nCurrMode
+                     End If
+                     m_nCountRefresh = 0
+                  Else
+                     m_nCountRefresh = m_nCountRefresh + 1
+                  End If
+               Case CN_generico.CnData.Power
+                  m_CN.d_spindle_power = d_temp
+               Case CN_generico.CnData.Spindle     ' (7) Stato rotazione mandrino
+                  m_CN.bSpindleState = b_temp
+               Case CN_generico.CnData.Coolant     ' (8) Stato acqua
+                  m_CN.bCoolantState = b_temp
+               Case CN_generico.CnData.Laser       ' (9) Stato laser punto
+                  m_CN.bLaserState = b_temp
+               Case CN_generico.CnData.PowerOvr       ' (10) Amperaggio
+                  m_CN.bPowerOvr = d_temp
+               Case CN_generico.CnData.InternalCoolant     ' (13) Stato acqua interna
+                  m_CN.bInternalCoolantState = b_temp
+               Case CN_generico.CnData.ExternCoolant     ' (14) Stato acqua esterna
+                  m_CN.bExternCoolantState = b_temp
+               Case CN_generico.CnData.CBAxes     ' (15) Stato ativazione assi c e b
+                  m_CN.bCBAxesState = b_temp
+               Case CN_generico.CnData.AirBlow     ' (16) Stato soffio utensile
+                  m_CN.bAirBlowState = b_temp
+               Case CN_generico.CnData.Home     ' (17) Stato home
+                  m_CN.bHomeState = b_temp
+               Case CN_generico.CnData.TableUp     ' (18) Stato tavolo su
+                  m_CN.bTableUpState = b_temp
+               Case CN_generico.CnData.TableDown     ' (19) Stato tavolo giu'
+                  m_CN.bTableDownState = b_temp
+               Case CN_generico.CnData.DoorClosed    ' (20) Stato porte
+                  m_CN.nDoorClosedState = n_temp
+               Case CN_generico.CnData.LimitZ     ' (21) Stato limitazione asse Z
+                  m_CN.bLimitZState = b_temp
+               Case CN_generico.CnData.VacuumUp     ' (22) Stato ventosa su'
+                  m_CN.bVacuumUp = b_temp
+               Case CN_generico.CnData.VacuumDown     ' (23) Stato ventosa giu'
+                  m_CN.bVacuumDown = b_temp
+               Case CN_generico.CnData.Vacuum2Up     ' (24) Stato ventosa2 su'
+                  m_CN.bVacuum2Up = b_temp
+               Case CN_generico.CnData.Vacuum2Down     ' (25) Stato ventosa2 giu'
+                  m_CN.bVacuum2Down = b_temp
+               Case CN_generico.CnData.Vacuum1State     ' (26) Stato ventosa 1
+                  m_CN.bVacuum1State = b_temp
+               Case CN_generico.CnData.Vacuum2State     ' (27) Stato ventosa 2
+                  m_CN.bVacuum2State = b_temp
+               Case CN_generico.CnData.Vacuum3State     ' (28) Stato ventosa 3
+                  m_CN.bVacuum3State = b_temp
+               Case CN_generico.CnData.Vacuum4State     ' (29) Stato ventosa 4
+                  m_CN.bVacuum4State = b_temp
+               Case CN_generico.CnData.Vacuum5State     ' (30) Stato ventosa 5
+                  m_CN.bVacuum5State = b_temp
+               Case CN_generico.CnData.Vacuum6State     ' (31) Stato ventosa 6
+                  m_CN.bVacuum6State = b_temp
+               Case CN_generico.CnData.Vacuum135State     ' (32) Stato ventose 135
+                  m_CN.bVacuum135State = b_temp
+               Case CN_generico.CnData.Vacuum246State     ' (33) Stato ventose 246
+                  m_CN.bVacuum246State = b_temp
+               Case CN_generico.CnData.OpenAllState     ' (34) Stato apertura ventose
+                  m_CN.bOpenAllState = b_temp
+               Case CN_generico.CnData.CloseAllState     ' (35) Stato chiusura ventose
+                  m_CN.bCloseAllState = b_temp
+               Case CN_generico.CnData.Open123State     ' (36) Stato apertura ventose
+                  m_CN.bOpen123State = b_temp
+               Case CN_generico.CnData.Open456State     ' (37) Stato apertura ventose
+                  m_CN.bOpen456State = b_temp
+               Case CN_generico.CnData.Close123State     ' (38) Stato chiusura ventose
+                  m_CN.bClose123State = b_temp
+               Case CN_generico.CnData.Close456State     ' (39) Stato chiusura ventose
+                  m_CN.bClose456State = b_temp
+               Case CN_generico.CnData.BlowState     ' (40) Stato soffio ventose
+                  m_CN.bBlowState = b_temp
+               Case CN_generico.CnData.VacuumOn     ' (41) Stato aspirazione ventose acceso
+                  m_CN.bVacuumOn = b_temp
+               Case CN_generico.CnData.BypassState     ' (42) Stato bypass
+                  m_CN.bBypassState = b_temp
+               Case CN_generico.CnData.Vacuum0     ' (43) Stato rotazione ventosa 0
+                  m_CN.bVacuum0 = b_temp
+               Case CN_generico.CnData.Vacuum90     ' (44) Stato rotazione ventosa 0
+                  m_CN.bVacuum90 = b_temp
+               Case CN_generico.CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
+                  m_CN.bVacuumOff = b_temp
+               Case CN_generico.CnData.LaserTrac   ' (46) Stato laser tracciatura
+                  m_CN.bLaserTracState = b_temp
+               Case CN_generico.CnData.XYJog     ' (47) 
+                  m_CN.bXYJog = b_temp
+               Case CN_generico.CnData.ZCJog     ' (48)
+                  m_CN.bZCJog = b_temp
+               Case CN_generico.CnData.ZBJog     ' (49)
+                  m_CN.bZBCJog = b_temp
+               Case CN_generico.CnData.PowerON     ' (50)
+                  m_CN.bPowerON = b_temp
+               Case CN_generico.CnData.Remote     ' (51)
+                  m_CN.bRemote = b_temp
+               Case CN_generico.CnData.Parking     ' (52)
+                  m_CN.bParkingState = b_temp
+               Case CN_generico.CnData.nAxes     ' (55)
+                  m_CN.n_index_is_G24_active = nIndex
+                  m_CN.b5AxesState = b_temp
+               Case CN_generico.CnData.ResetStatus     ' (56)
+                  m_CN.bResetState = b_temp
 
-         nVarValue = m_CN.n_data(2)
-         'EgtOutLog("Variabile PLC  door addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed) & " value: " & nVarValue)
-         m_CN.nDoorClosedState = nVarValue
-
-         nVarValue = m_CN.n_data(4)
-         'EgtOutLog("Variabile PLC control 2 addr: " & 3 & " value: " & nVarValue)
-         m_CN.bLaserState = IsSetAll(nVarValue, ControlStates2.Laser)
-         m_CN.bHsm = IsSetAll(nVarValue, ControlStates2.Hsm)
-         m_CN.bResetState = IsSetAll(nVarValue, ControlStates2.ResetState)
-         m_CN.bFeedHold = IsSetAll(nVarValue, ControlStates2.FeedHold)
-         m_CN.bSpeedHold = IsSetAll(nVarValue, ControlStates2.SpindleHold)
+            End Select
+         Next
+         '------------ SINUMERIK ONE ----------------------------------------------
 
       End If
 
+      m_MachineStatus.DisplayPower()
+
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -1093,6 +1437,7 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            ' modalità vecchia
             If m_CN.Is_G24_active() Then
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
@@ -1121,8 +1466,25 @@ Public Class CNCommunication
          End If
       End If
 
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
    End Sub
 
+   Private Function ReadBit(IndexBit As Integer, Val As Integer) As Boolean
+      If IndexBit < 0 Then Return False
+      Dim _mask = GetMaskByBit(IndexBit)
+      If _mask = Mask.bit_Err Then Return False
+      If (Val And _mask) = 0 Then Return False
+      Return True
+   End Function
+
    Friend Function SetProgramMainOrSub(bMain As Boolean) As Boolean
       Return m_CN.SetProgramMainOrSub(bMain)
    End Function
@@ -1130,12 +1492,18 @@ Public Class CNCommunication
    Friend Function SendProgram(ByVal sCncPath As String, ByVal nNumProg As Integer,
                                Optional bActivate As Boolean = True) As Boolean
       Dim bOk As Boolean = True
+
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+      ' m_nNCType = 2
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+
       ' Download programma
       If m_MainWindow.m_bNCLink Then
          bOk = (m_nNCType > 0)
          Dim sNumProg As String = String.Empty
          If m_nNCType = 1 Or m_nNCType = 2 Then
-            sNumProg = "%" & nNumProg.ToString() & ".0"
+            Dim sExtFileCN As String = m_MainWindow.m_CurrentMachine.sExtFileCN
+            sNumProg = "%" & nNumProg.ToString() & sExtFileCN
          Else
             sNumProg = nNumProg.ToString()
          End If
@@ -1162,7 +1530,7 @@ Public Class CNCommunication
             ' Attesa opportuna
             System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
-         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         EgtOutLog("Download_NC_prog(" & sCncPath & ", " & sNumProg.ToString & ")")
          ' -------------- START DOWNLOAD -------------- 
          TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
@@ -1203,7 +1571,7 @@ Public Class CNCommunication
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
-            EgtOutLog("ActivateProgram(nNumProg)")
+            EgtOutLog("ActivateProgram(" & nNumProg.ToString & ")")
             TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
             EgtOutLog(TimeSpanEnd())
@@ -1333,3 +1701,95 @@ Public Class CNCommunication
    End Function
 
 End Class
+
+Public Class RefereceFlagSimens
+
+   Private m_SiemnesArrayIndex As Integer
+   Private m_FlagIndex As Integer
+   Private m_TypeArray As Integer
+   ' Opzionale
+   Private m_IndexBit As Integer = -1
+   Private m_DefaultValue As String = ""
+
+   Public Property SiemnesArrayIndex As Integer
+      Get
+         Return m_SiemnesArrayIndex
+      End Get
+      Set(value As Integer)
+         m_SiemnesArrayIndex = value
+      End Set
+   End Property
+
+   Public Property FlagIndex As Integer
+      Get
+         Return m_FlagIndex
+      End Get
+      Set(value As Integer)
+         m_FlagIndex = value
+      End Set
+   End Property
+
+   Public Property TypeArray As Integer
+      Get
+         Return m_TypeArray
+      End Get
+      Set(value As Integer)
+         m_TypeArray = value
+      End Set
+   End Property
+
+   Public Property IndexBit As String
+      Get
+         Return m_IndexBit
+      End Get
+      Set(value As String)
+         m_IndexBit = value
+      End Set
+   End Property
+
+   Public Property DefaultValue As String
+      Get
+         Return m_DefaultValue
+      End Get
+      Set(value As String)
+         m_DefaultValue = value
+      End Set
+   End Property
+
+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+   End Sub
+
+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer, nIndBit As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+      m_IndexBit = nIndBit
+   End Sub
+
+End Class
+
+Public Class IndexArrayToBit
+
+   Private m_nIndex As Integer = 0
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_sNameVar As String = ""
+   Public ReadOnly Property sNameVar As String
+      Get
+         Return m_sNameVar
+      End Get
+   End Property
+
+   Sub New(Index As Integer, NameVar As String)
+      m_nIndex = Index
+      m_sNameVar = NameVar
+   End Sub
+
+End Class

NcComm/CN_Siemens.vb

@@ -87,6 +87,7 @@ Public Class CN_Siemens
             Case 8   ' Modalita Ref Point
                sDBVarPath &= "REF_POINT"
          End Select
+         ' /plc/"OmagCUT_DB".CTRL.AUTO
          DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")
          Return 0
       Else
@@ -132,7 +133,7 @@ Public Class CN_Siemens
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
       If m_IsSiemensOne Or m_IsActiveModeSubscription Then
-         Select Case n_data(3)
+         Select Case n_data(n_index_mode)
             Case 1
                Return 0
             Case 2
@@ -144,7 +145,7 @@ Public Class CN_Siemens
          End Select
       Else
          ' per verificare che la comunicazione funzioni correttamente
-         EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
+         ' EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
          Return M_MMFiles.read_active_mode()
          'Return CShort(M_MMFiles.SiemensRet.n_param2)
       End If
@@ -152,7 +153,12 @@ Public Class CN_Siemens
 
    Public Overrides Function Is_G24_active() As Boolean
 
-      Return M_MMFiles.SiemensRet.b_interf_G24
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
+         Return b_data(n_index_is_G24_active)
+
+      Else
+         Return M_MMFiles.SiemensRet.b_interf_G24
+      End If
 
    End Function
 
@@ -217,12 +223,12 @@ Public Class CN_Siemens
    Public Overrides Sub DVariables_WriteVariables3(VarAddr As String, ParType As Short, nVarValue As Integer, lVarValue As Long, dVarValue As Double, sVarValue As String)
       Dim n_ret As Short = Write_var(VarAddr, ParType, nVarValue, lVarValue, dVarValue, sVarValue)
       'EgtOutLog("CN SIEMENS Dopo scrittura variabile")
-
    End Sub
 
    Public Overrides Sub DVariables_Read_Subscription(VarAddr As String, ParType As Short, Index As Integer)
+      ' Ricevo il percorso della varibile, il tipo 
       Dim n_ret As Short = Read_subscription(VarAddr, ParType, Index)
-      'EgtOutLog("CN SIEMENS Dopo lettura abbonamento")
+      EgtOutLog(" ABBONAMENTO (Esito: " & n_ret.ToString & ") -> Address: " & VarAddr & ", Type: " & ParType.ToString & ", Index: " & Index.ToString)
    End Sub
 
    '

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 57                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -72,6 +72,8 @@ Public MustInherit Class CN_generico
       EnablePC = 54
 
       nAxes = 55
+
+      ResetStatus = 56
    End Enum
 
    Public Enum Type As Short
@@ -138,6 +140,9 @@ Public MustInherit Class CN_generico
    Public d_param1 As Double
    Public sz_string As String                 ' ( MAX 200 caratteri )
 
+   ' Indice del vettore n_data associato alla lettura nMode
+   Public n_index_mode As Integer = 0
+   Public n_index_is_G24_active As Integer = 0
    Public b_data(14) As Boolean
    Public n_data(14) As Int16
    Public l_data(14) As Long

NcComm/M_Fanuc.vb

@@ -1683,7 +1683,16 @@ Module M_Fanuc
       sz_Err_Msg = ""
       If Not bSimulation Then
 
-         sz_MDI_program = sz_MDI_command
+         ' Nicola: 10/05/2024
+
+         Dim sItems As String() = sz_MDI_command.Split(";")
+         Dim sNew_MDI_program As String = ""
+         For Each sItem As String In sItems
+            sNew_MDI_program &= sItem & vbLf
+         Next
+         sNew_MDI_program &= "%"
+
+         sz_MDI_program = sNew_MDI_program
 
          ' Nicola: 29/03/2023
 

NcComm/M_Fanuc_hi.vb

@@ -650,9 +650,7 @@ Namespace Fanuc
 					  ' ...
 
 					Case CnData.Feed       ' (2)
-
-						Dim qq As Short = n_temp
-					  'd_DInterpo_Prog_Feed = CDbl(CLng(values(n))) ' d_DInterpo_Prog_Feed
+						d_DInterpo_Prog_Feed = CDbl(n_temp) ' d_DInterpo_Prog_Feed
 
 					Case CnData.FeedOvr    ' (3) Potenziom. Feed  = * 0.47059
 						d_DInterpo_Feed_override = CDbl(n_temp)

NcComm/M_MMFiles.vb

@@ -19,8 +19,8 @@ Module M_MMFiles
 
 #Region " Structures"
 
-
-   <StructLayout(LayoutKind.Sequential)> _
+   ' Struttura per spedire un "comando" al Siemens
+   <StructLayout(LayoutKind.Sequential)>
    Structure SiemensSendStruct
 
       Public n_Flag As Integer
@@ -46,7 +46,7 @@ Module M_MMFiles
 
    Private SiemensSend As SiemensSendStruct
 
-
+   ' Struttura per leggere l'esito di un "comando" al Siemens
    <StructLayout(LayoutKind.Sequential)> _
    Structure SiemensRetStruct
 
@@ -75,6 +75,7 @@ Module M_MMFiles
       Public b_is_laser_ON As Boolean
       Public b_is_spindle_ON As Boolean
 
+      ' Vettore assi macchina (file SiemensComm: axes_0_M, axes_0_P)
       <MarshalAs(UnmanagedType.ByValArray, ArraySubType:=UnmanagedType.R8, SizeConst:=16)> _
       Public d_interf_axis_position() As Double
 
@@ -176,7 +177,7 @@ Module M_MMFiles
 #End Region
 
 #Region " Commands constants"
-
+   ' Elenco codici comandi per spedire programma a SiemensComm.exe
    Enum CMD As Short
 
       CMD_Download_NC_prog = 1
@@ -205,6 +206,7 @@ Module M_MMFiles
    End Enum
 
    Friend Enum VarType As Short
+      TBoolean = 0
       TInteger = 1
       TLong = 2
       TDouble = 3
@@ -343,6 +345,9 @@ Module M_MMFiles
    Function ActivateProgram(ByVal sz_part_program As String) As Short
       'EgtOutLog("ActivateProgram start dell'm_mmFiles")
 
+      EgtOutLog("Flag di comando: " & CMD.CMD_ActivateProgram.ToString)
+      EgtOutLog("Stringa di comando: " & sz_part_program.ToString)
+
       SiemensSend.n_Command = CMD.CMD_ActivateProgram
       SiemensSend.sz_string = sz_part_program
 
@@ -370,7 +375,8 @@ Module M_MMFiles
       SiemensSend.n_Command = CMD.CMD_CycleStart
 
       execute_command()
-      'EgtOutLog("CycleStart end dell'm_mmFiles")
+      ' Rimango in attesa
+      EgtOutLog(" → CycleStart")
       Return SiemensRet.n_result
 
    End Function
@@ -597,16 +603,15 @@ Module M_MMFiles
       'EgtOutLog("Write_Nc_var start dell'm_mmFiles")
       SiemensSend.n_Command = CMD.CMD_Read_NC_subscription
       SiemensSend.sz_string_2 = VarAddr ' indirizzo su CN dell' oggetto da scrivere 
-
+      EgtOutLog(" → Sottoscrivo lettura di '" & VarAddr & "'")
       SiemensSend.n_param1 = Index   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice del vettore associato '" & Index & "'")
       SiemensSend.n_param2 = ParType   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice tipo di variabile '" & ParType & "'")
       execute_command()
       m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message = SiemensRet.sz_interf_error_message
-
-      EgtOutLog("sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
-      EgtOutLog("n_result: " & SiemensRet.n_result)
+      EgtOutLog("   sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
+      EgtOutLog("   n_result: " & SiemensRet.n_result)
       Return SiemensRet.n_result
    End Function
 
@@ -765,7 +770,7 @@ Module M_MMFiles
          End If
 
          ' copio variabili in abbonamento
-         For Index As Integer = 0 To 5
+         For Index As Integer = 0 To 14
             CurrCN.b_data(Index) = SiemensRet.b_data(Index)
             CurrCN.n_data(Index) = SiemensRet.n_data(Index)
             CurrCN.l_data(Index) = SiemensRet.l_data(Index)

NcComm/M_Num_old.vb

@@ -289,6 +289,7 @@ Namespace Num
 
          ' Stringhe valide : "COM" o "XIP01, 0, 10, 0, 0, 0"
          Dim nret As Integer = NC_connect(m_szCnDataVar(CnData.Comm))
+         EgtOutLog(" → Risultatao apertura connessiione: " & nret)
          If nret <> 0 Then Return False
 
          n_state = 2
@@ -583,7 +584,6 @@ Namespace Num
       End Function
 
       Function Read_machine_pos() As Int16
-
          Dim nret As Int16
          Dim i, n As Integer
 

OmagCUT.vbproj

@@ -115,6 +115,9 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="DotNetZip">
+      <HintPath>..\..\EgtProg\OmagCUT\DotNetZip.dll</HintPath>
+    </Reference>
     <Reference Include="EgtPHOTOLib">
       <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
     </Reference>
@@ -142,9 +145,6 @@
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXServer.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
-    <Reference Include="Ionic.Zip">
-      <HintPath>..\..\EgtProg\OmagCUT\Ionic.Zip.dll</HintPath>
-    </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
     <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
@@ -174,6 +174,9 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\ChooseTestToolWD.xaml.vb">
+      <DependentUpon>ChooseTestToolWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
       <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
     </Compile>
@@ -209,6 +212,9 @@
     <Compile Include="DrawImport\UnderDrillUC.xaml.vb">
       <DependentUpon>UnderDrillUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="LicenseWindow.xaml.vb">
+      <DependentUpon>LicenseWindow.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Machine\AlarmsPageUC.xaml.vb">
       <DependentUpon>AlarmsPageUC.xaml</DependentUpon>
     </Compile>
@@ -245,6 +251,9 @@
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -438,6 +447,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\ChooseTestToolWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -482,6 +495,10 @@
       <SubType>Designer</SubType>
       <Generator>XamlIntelliSenseFileGenerator</Generator>
     </Page>
+    <Page Include="LicenseWindow.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Machine\AlarmsPageUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -519,6 +536,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -1330,6 +1351,40 @@
   <ItemGroup>
     <Resource Include="Resources\ToolChangerPos.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\PhotoHQ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icone-tagli-1HQ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\4.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\5.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Muovi-grezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\ON_OFF-REG.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Move-Spot-Reg.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %282%29.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %283%29.png" />
+    <Resource Include="Resources\NewIcons\RawHeight.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -32,6 +32,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/NewIcons/ruota-oggetto-inclinato.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/NewIcons/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/NewIcons/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/NewIcons/1-BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/NewIcons/2-BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/NewIcons/PartRotOn.png"></BitmapImage>
@@ -62,6 +63,7 @@
     <BitmapImage x:Key="PhotoImg" UriSource="Resources/NewIcons/icone-tagli-1.png"></BitmapImage>
     <BitmapImage x:Key="RawPartImg" UriSource="Resources/NewIcons/icone-tagli-5.png"></BitmapImage>
     <BitmapImage x:Key="RawProbeImg" UriSource="Resources/NewIcons/RawProbe.png"></BitmapImage>
+    <BitmapImage x:Key="RawHeightImg" UriSource="Resources/NewIcons/RawHeight.png"></BitmapImage>
     <BitmapImage x:Key="RightArrowImg" UriSource="Resources/NewIcons/RightArrow.png"></BitmapImage>
     <BitmapImage x:Key="SawProbeImg" UriSource="Resources/NewIcons/SawProbe.png"></BitmapImage>
     <BitmapImage x:Key="SendImg" UriSource="Resources/NewIcons/Send.png"></BitmapImage>
@@ -236,7 +238,10 @@
         <Setter Property="Foreground" Value="White"/>
         <Setter Property="IsReadOnly" Value="True"/>
         <Setter Property="IsEnabled" Value="False"/>
+        <Setter Property="TextAlignment" Value="Center"/>
         <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />
+        <Setter Property="ToolTipService.ShowOnDisabled" Value="True"/>
+        <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=Text}"/>
     </Style>
 
     <Style x:Key="OmagCut_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>
@@ -132,6 +133,7 @@
     <BitmapImage x:Key="PhotoImg" UriSource="Resources/Photo.png"></BitmapImage>
     <BitmapImage x:Key="RawPartImg" UriSource="Resources/RawPart.png"></BitmapImage>
     <BitmapImage x:Key="RawProbeImg" UriSource="Resources/RawProbe.png"></BitmapImage>
+    <BitmapImage x:Key="RawHeightImg" UriSource="Resources/NewIcons/RawHeight.png"></BitmapImage>
     <BitmapImage x:Key="RightArrowImg" UriSource="Resources/RightArrow.png"></BitmapImage>
     <BitmapImage x:Key="SawProbeImg" UriSource="Resources/SawProbe.png"></BitmapImage>
     <BitmapImage x:Key="SendImg" UriSource="Resources/Send.png"></BitmapImage>
@@ -170,6 +172,7 @@
     <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
     <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
     <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Muovi-grezzoImg" UriSource="Resources/NewIcons/Muovi-grezzo.png"></BitmapImage>
     <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
@@ -224,6 +227,7 @@
     <BitmapImage x:Key="QualityWJImg" UriSource="Resources/NewIcons/Quality.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-REGImg" UriSource="Resources/NewIcons/ON_OFF-REG.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
@@ -239,6 +243,7 @@
     <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
+    <BitmapImage x:Key="Move-Spot-RegImg" UriSource="Resources/NewIcons/Move-Spot-Reg.png"></BitmapImage>
 
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
 
@@ -790,7 +795,13 @@
       <Setter Property="Margin" Value="0,8,6,4"/>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Style di un immagine in al posto di una text-->
+    <Style x:Key="OmagCut_TextIcon" TargetType="{x:Type Image}" >
+        <Setter Property="Width" Value="30"/>
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!-- ScrollBar & it's component (RepeatButton, Thumb) -->
 
@@ -1187,7 +1198,7 @@
       <Setter Property="HorizontalAlignment" Value="Center"/>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TextBox-->
 
@@ -1262,11 +1273,14 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
-        <Setter Property="Background" Value="White"/>
+      <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
+      <Setter Property="TextAlignment" Value="Center"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />
-   </Style>
+      <Setter Property="ToolTipService.ShowOnDisabled" Value="True"/>
+      <Setter Property="ToolTip"  Value="{Binding RelativeSource={RelativeSource Self}, Path=Text}"/>
+    </Style>
 
    <!-- ______________________________________________________________________________________________________________________ -->
 

Options/OptionsPageUC.xaml.vb

@@ -1304,6 +1304,8 @@ Public Class OptionsPageUC
       End If
       Try
          Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
+            zip.AlternateEncodingUsage = Ionic.Zip.ZipOption.Always
+            zip.AlternateEncoding = Text.Encoding.UTF8
             ' aggiungo file macchine
             For Each sMachineName As String In Machines
                Dim sMachineDir As String = m_MainWindow.GetMachinesRootDir() & "\" & sMachineName

Project/CurrentProjectPageUC.xaml

@@ -7,79 +7,80 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280"
    Initialized="CurrentProjectPage_Initialized" Loaded="CurrentProjectPage_Loaded">
- 
-   <!-- Definizione della CurrentProjectPage -->
-   <Grid Name="CurrentProjectPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
 
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-
-      </Grid>
-
-      <!-- Definizione della Grid laterale -->
-        <Grid Grid.RowSpan="3">
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="7*"/>
+    <!-- Definizione della CurrentProjectPage -->
+    <Grid Name="CurrentProjectPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid con le caratteristiche del progetto -->
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid laterale -->
+        <Grid Grid.RowSpan="3">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!-- Definizione della Grid con le caratteristiche del progetto -->
             <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_MachiningBorder}" Grid.Row="0" >
                 <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="MaterialTxBl" Grid.Row="0"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="HeightTxBl" Grid.Row="1"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Width="100"
+                    <Image Name="MaterialTxBl" 
+                           Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Margin="0,0,10,0"
+                   TextAlignment="Right" Style="{DynamicResource OmagCut_FixedTextBox}"/>
+                    <Image Name="HeightTxBl" Grid.Row="1"
+                       Source="{DynamicResource RawHeightImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                   <Image Name="ToolTxBl" Grid.Row="2"
+                       Source="{DynamicResource DB-utensiliImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                    <Image Name="MachiningTxBl" Grid.Row="3"
+                       Source="{DynamicResource DB-lavorazioniImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
-               <TextBlock Name="ToolTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="MachiningTxBl" Grid.Row="3"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
 
-            </Grid>
+                </Grid>
 
-         </Border>
+            </Border>
 
-         <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
+            <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
 
-         <Border Name="OutMessageBrd" Grid.Row="2" >
-            <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
+            <Border Name="OutMessageBrd" Grid.Row="2" >
+                <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
                Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         </Border>
+            </Border>
 
-      </Grid>
+        </Grid>
 
-   </Grid>
+    </Grid>
 
 </UserControl>

Project/CurrentProjectPageUC.xaml.vb

@@ -7,8 +7,10 @@ Imports EgtWPFLib5
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    ' Dichiarazione delle Page UserControl
@@ -57,11 +59,11 @@ Public Class CurrentProjectPageUC
       CurrentProjectSceneHost.SetValue(Grid.RowProperty, 1)
       Me.CurrentProjectPageGrid.Children.Add(CurrentProjectSceneHost)
 
-      'Imposto i messaggi letti dal file dei messaggi
-      MaterialTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 9)       'Material - Materiale
-      HeightTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 5)         'Height - Spessore
-      ToolTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
-      MachiningTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
+      'Imposto i messaggi letti dal file dei messaggi      
+      MaterialTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 9)     'Material - Materiale
+      HeightTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 5)       'Height - Spessore
+      ToolTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
+      MachiningTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
 
    End Sub
 
@@ -107,7 +109,7 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Or m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_LIGHT)
          If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
@@ -118,11 +120,25 @@ Public Class CurrentProjectPageUC
 #Else
             ' Se manca la chiave
             If m_MainWindow.GetKeyLevel() = -1 Or m_MainWindow.GetKeyLevel() = -2 Then
-               EgtOutLog("Missing Dongle")
-               ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
-               Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
-               Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               If Not EgtGetNetHwKey() Then
+                  EgtOutLog("Missing Dongle")
+                  ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
+                  Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
+                  Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               Else
+                  EgtOutLog("NetDongle is full")
+                  ' Box di avviso slot chiave di rete occupato : "Chiave di Rete completamente occupata. \n Uscire dal programma su un altro PC." "Errore"
+                  Dim sText As String = EgtMsg(10110) & vbCrLf & EgtMsg(10111)
+                  Dim sTitle As String = EgtMsg(10101)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               End If
+            ElseIf m_MainWindow.GetKeyLevel() = -9 Then
+               EgtOutLog("Missing Link with Net Dongle")
+               ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione." "Errore"
+               Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
+               Dim sTitle As String = EgtMsg(10101)
+               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
                ' Altrimenti manca la licenza
             Else
                EgtOutLog("Problems with Licence")
@@ -196,9 +212,17 @@ Public Class CurrentProjectPageUC
       Else
          MaterialTxBx.Text = "-----"
       End If
-      ' Visualizzo lama e lavorazione correnti
-      ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+
+      ' se macchina waterjet e senza una lama corrente impostata allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSaw) Then
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+
    End Sub
 
    Public Sub StartProgram()
@@ -276,7 +300,7 @@ Public Class CurrentProjectPageUC
       ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
       If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
          ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+         If GetProjectType() <> PRJ_TYPE.FRAMES And Not m_MainWindow.m_OnlyFrame Then
             CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
             m_MainWindow.CadCutBtn.IsChecked = True
@@ -314,6 +338,10 @@ Public Class CurrentProjectPageUC
       RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.MouseDoubleClick
+      RaiseEvent OnMouseDownScene_DoubleClick(sender, e)
+   End Sub
+
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
       RaiseEvent OnMouseMoveScene(sender, e)
    End Sub
@@ -326,6 +354,10 @@ Public Class CurrentProjectPageUC
       SetInfoMessage(DistToString(vtDist))
    End Sub
 
+   Private Sub OnMyKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles CurrentProjectScene.KeyDown
+      RaiseEvent OnKeyCancelDownScene(sender, e)
+   End Sub
+
    ' Gestione progetto
 
    Friend Sub SetNextProjectIndex()
@@ -434,7 +466,10 @@ Public Class CurrentProjectPageUC
       End If
       ' Se valore cambiato, aggiorno...
       Dim dDeltaZ As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable - dCurrAddTab
-      If Math.Abs(dDeltaZ) > EPS_SMALL Or bForced Then
+      Dim bChanged As Boolean = ( Math.Abs(dDeltaZ) > EPS_SMALL)
+      If bChanged Or bForced Then
+         Dim bOldEnMod As Boolean = EgtGetEnableModified()
+         If Not bChanged AndAlso bOldEnMod Then EgtDisableModified()
          AddAdditionalTable()
          UpdateAllRawsZ(dDeltaZ)
          If GetPhoto() <> GDB_ID.NULL Then
@@ -450,6 +485,7 @@ Public Class CurrentProjectPageUC
                End While
             End If
          End If
+         If Not bChanged AndAlso bOldEnMod Then EgtEnableModified()
       End If
       Return True
    End Function
@@ -469,7 +505,9 @@ Public Class CurrentProjectPageUC
       ' Nuova geometria
       Dim nAddTabId As Integer = GDB_ID.NULL
       ' Se esiste geometria di riferimento
-      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      Dim sNameTable As String = MAIN_TAB
+      EgtGetTableName(sNameTable)
+      Dim nRefAddTabId = EgtGetFirstNameInGroup(EgtGetFirstNameInGroup(EgtGetTableId(sNameTable), "SOLID"), MACH_ADD_TABLE)
       If nRefAddTabId <> GDB_ID.NULL Then
          nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
          EgtSetStatus( nAddTabId, GDB_ST.ON_)
@@ -485,7 +523,7 @@ Public Class CurrentProjectPageUC
       ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
-      EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
+      If nRefAddTabId = GDB_ID.NULL Then EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
       EgtSetInfo(nAddTabId, KEY_ADD_TABLE, dAddTable)
       Return True
    End Function
@@ -996,10 +1034,16 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Friend Sub UpdateMachiningTxBx()
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      ' se macchina waterjet e senza uscita lama allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
    End Sub
 
-  ' Gestione fotografia della lastra (compreso riconoscimento contorno)
+   ' Gestione fotografia della lastra (compreso riconoscimento contorno)
 
    Friend Function LoadPhoto(sPath As String) As Boolean
       ' Verifico esistenza file immagine
@@ -1373,7 +1417,14 @@ Public Class CurrentProjectPageUC
    Friend Sub SetAreasStatus( bShow As Boolean)
       Dim nMarkId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK)
       If nMarkId = GDB_ID.NULL Then Return
+
+      ' Disabilito impostazione modificato
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      ' Cambio stato visualizzazione
       EgtSetStatus( nMarkId, If( bShow, GDB_ST.ON_, GDB_ST.OFF))
+      ' Se necessario riabilito impostazione modificato
+      If bOldEnMod Then EgtEnableModified()
    End Sub
 
    ' Gestione messaggi in interfaccia
@@ -1400,7 +1451,8 @@ Public Class CurrentProjectPageUC
 
    Friend Sub ClearMessage()
       OutMessageBrd.Background = Brushes.Transparent
-      OutMessageBrd.Visibility = Windows.Visibility.Hidden
+      OutMessageTxBl.Text = ""
+      'OutMessageBrd.Visibility = Windows.Visibility.Hidden
    End Sub
 
 End Class

Project/OpenPageUC.xaml.vb

@@ -100,6 +100,10 @@ Public Class OpenPageUC
          LoadCurrDir()
          m_bFirst = False
       Else
+         GetPrivateProfileString(S_SLABDXF, K_SLABLAYER, "SlabBoundary", m_sSlabLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_PARTSLAYER, "Counters", m_sPartsLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_SCRAPLAYER, "ReservedAreaBoundary", m_sScrapLayer, m_MainWindow.GetIniFile())
+         m_dSlabThick = GetPrivateProfileDouble(S_SLABDXF, K_STDTHICK, 20, m_MainWindow.GetIniFile())
          EgtSetCurrentContext(OpenScene.GetCtx())
       End If
       ' Pulisco tutto
@@ -491,7 +495,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

Project/ProjectMgrUC.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.ComponentModel
 Imports System.Drawing
 Imports System.IO
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -32,6 +33,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
+      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Reset Feed (Shift)"
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -250,6 +252,11 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
+      If (Keyboard.Modifiers And ModifierKeys.Shift) Then
+         ' eseguo il ricalcolo delle sole FEED di lavorazione
+         UpdateFeedAllMachining()
+         Return
+      End If
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -259,6 +266,8 @@ Public Class ProjectMgrUC
       ResetAllStartCurv()
       ' cancello tutti i ponticelli disegnati
       ResetAllBRidges()
+      ' cancella tutti i tagli di separazione inseriti in OFFICE
+      ResetAllSplitCut()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -305,47 +314,117 @@ Public Class ProjectMgrUC
          Dim m_ptRawMax, m_ptRawMin As Point3d
          If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then Return
          Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+
          ' Recupero spessore lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         EgtTdbSetCurrTool(sSaw)
+         Dim TestToolWD As New ChooseTestToolWD(m_MainWindow)
+         TestToolWD.ShowDialog()
+         If Not TestToolWD.DialogResult Then Return
+         Dim CurrTestTool As TestTool = TestToolWD.GetSelectedTool
+
+         'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         'EgtTdbSetCurrTool(sSaw)
+
          Dim dThick As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-         Dim dDiam As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
+         Dim dHeight As Double = 0
+         If CurrTestTool.ToolIsSaw Then
+            ' Spessore LAMA
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+            ' Diametro
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dHeight)
+            ' Raggio lama
+            dHeight = dHeight / 2
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Raggio
+            dThick = 0
+            dHeight = 0
+         Else
+            ' Diametro FRESA/FORETTO (l'altezza non serve: posizione calcolata tiene conto del Tip Tool)
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dThick)
+            ' Raggio
+            dThick = dThick / 2
+         End If
+
+
          'recupero il lato selezionato 
          Dim nIdSelected As Integer = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv
          If nIdSelected = -1 Then Return
-         ' recupero gli estremi del latovda tagliare
-         Dim ptStart As Point3d
-         EgtStartPoint(nIdSelected, GDB_ID.ROOT, ptStart)
-         Dim ptEnd As Point3d
-         EgtEndPoint(nIdSelected, GDB_ID.ROOT, ptEnd)
-         Dim vtDirLine As Vector3d = ptEnd - ptStart
-         ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+         ' recupero il vettore nel punto medio dell'entità
+         Dim vtDirLine As Vector3d
+         EgtMidVector(nIdSelected, GDB_ID.ROOT, vtDirLine)
+
+         ' calcolo il versore della linea di taglio
          Dim vtDirT As Vector3d = vtDirLine
          vtDirT.Normalize()
-         vtDirT.Rotate(Vector3d.Z_AX, 90)
+         ' calcolo la direzione di offset da applicare all'utensile
+         Dim vtOffset As New Vector3d(vtDirT.x, vtDirT.y, vtDirT.z)
+         vtOffset.Rotate(Vector3d.Z_AX, 90)
+
+         If CurrTestTool.ToolIsSaw Then
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+         Else
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+            ' calcolo il versore perpendicolare al piano di taglio (diretto verso l'interno dell'utensile)
+            vtDirT.Rotate(vtDirLine, 90)
+         End If
 
          ' Calcolo punto di posizionamemto (punto medio)
          Dim ptMid, m_ptTabOri As Point3d
 
          If Not EgtGetTableRef(1, m_ptTabOri) Then Return
-         ptMid.x = (ptEnd.x + ptStart.x) / 2
-         ptMid.y = (ptEnd.y + ptStart.y) / 2
-         ptMid.z = (ptEnd.z + ptStart.z) / 2 + dDiam / 2
-         ptMid -= vtDirT * dThick
+         ' recupero il punto medio della curva
+         EgtMidPoint(nIdSelected, GDB_ID.ROOT, ptMid)
+         ptMid.z = m_ptTabOri.z + CamAuto.GetRawHeight() + dHeight
+         ' Offset dovuto allo spessore Utensile
+         ptMid -= vtOffset * dThick
 
          '--------------------------- Imposto la posizione della macchina ----------------------------
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+
+         ' Imposto la lama corrente, preso dalla scelta precedente
+         'If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         If Not EgtSetCalcTool(CurrTestTool.ToolName, CurrTestTool.ToolHead, CurrTestTool.ToolExit) Then Return
 
          ' calcolo la posizione degli assi rotanti C, B
          Dim nStat As Integer
          Dim dC1, dB1, dC2, dB2 As Double
-         EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         If CurrTestTool.ToolIsSaw Then
+            ' Se LAMA
+            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Se LASER
+            Dim dHomeC As Double = 90
+            EgtGetAxisHomePos("C", dHomeC)
+            Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+            vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+            EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ' Forzo B90
+            dB1 = 90
+            ' Forzo la pozione in Z alla quota di Home (per evitare l'errore di fine corsa asse Z)
+            Dim dHomeZ As Double = 0
+            EgtGetAxisHomePos("Z", dHomeZ)
+            ptMid.z = dHomeZ
+         Else
+            ' Se utensile speciale
+            If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+               ' Se FRESA/FORETTO
+               Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+               ' Se WJ
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            End If
+         End If
+
          ' calcolo la posizione degli assi lineari X, Y, Z
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
@@ -353,16 +432,49 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
+            EgtOutLog("Out of stroke: " & nStat)
             vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
-            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            If CurrTestTool.ToolIsSaw Then
+               EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolIsLaser Then
+               ' Se LASER
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ' Forzo B90
+               dB1 = 90
+            Else
+               If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+                  ' Se FRESA/FORETTO
+                  Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+                  Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+                  ' Se WJ
+                  Dim dHomeC As Double = 90
+                  EgtGetAxisHomePos("C", dHomeC)
+                  Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               End If
+            End If
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
+
+            ' verifica assi lineari
+            EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
+            If nStat <> 0 Then
+               EgtOutLog("2nd attemp out of stroke: " & nStat)
+            End If
          End If
 
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
-         Dim ptMachine As Point3d = New Point3d(dX, dY, dZ)
-         ExecuteCommandCNC(ptMachine, dC1, dB1)
+         Dim ptMachine As Point3d = New Point3d(dX, dY, If(CurrTestTool.ToolIsLaser, 0, dZ))
+         ExecuteCommandCNC(ptMachine, dC1, dB1, CurrTestTool)
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
@@ -510,7 +622,6 @@ Public Class ProjectMgrUC
             ' apro la finestra con l'elenco degli sfridi
             Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
             MyScrapsWD.ShowDialog()
-
          End If
          ' ------------------ FINE gestione SCRAPS -----------------------------
 
@@ -580,6 +691,13 @@ Public Class ProjectMgrUC
                   EgtDraw()
                   ' Dichiaro che il progetto è nuovo
                   bAlreadySent = False
+                  ' reimposto tutti gli sfridi come nuovi sfridi
+                  Dim CurrScrapsList As New List(Of Scrap)
+                  ' procedo all'aggiornamento della lista degli sfridi
+                  UpDateScrapList(CurrScrapsList)
+                  For Each ItemScrap As Scrap In CurrScrapsList
+                     ItemScrap.ResetState()
+                  Next
                End If
             End If
             If bAlreadySent Then
@@ -590,6 +708,18 @@ Public Class ProjectMgrUC
             End If
          End If
 
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
+
          ' Se non collegato alla macchina
          If Not m_MainWindow.m_bNCLink Then
             ' salvo il progetto corrente incrementando il valore del progetto
@@ -629,6 +759,12 @@ Public Class ProjectMgrUC
                Exit For
             End If
          Next
+
+         ' leggo il nome della tavola da cui sto lanciando il progetto 
+         Dim sTabeName As String = String.Empty
+         EgtGetTableName(sTabeName)
+         Dim bDoubleProg As Boolean = (GetPrivateProfileInt(S_PRODUCTIONLINE, "DoubleProg", 0, m_MainWindow.GetMachIniFile()) <> 0)
+
          ' Leggo eventuale variabile per lavorazione con 2 tavole in parallelo (standard E80027)
          Dim nVarProgTwins As Integer = 1
          If Not String.IsNullOrWhiteSpace(m_CurrMachine.sVarProgTwins) Then
@@ -642,8 +778,26 @@ Public Class ProjectMgrUC
                End If
             Next
          End If
+
          ' Verifico se posso scrivere nell'area 1
-         If nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2) Then
+         Dim bSendToAre1 As Boolean = (nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2))
+         Dim bSendToAre2 As Boolean = (nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2))
+
+         If bDoubleProg Then
+            If sTabeName = MAIN_TAB Then
+               ' spedisco il programma da tavola 1 solo se CN ha terminato programma 901
+               bSendToAre1 = (nVarProg1 = 0)
+               bSendToAre2 = False
+               EgtOutLog(" Invio programma da tavola 1")
+            Else
+               ' spedisco il programma da tavola 2 solo se CN ha terminato programma 902
+               bSendToAre1 = False
+               bSendToAre2 = (nVarProg2 = 0)
+               EgtOutLog(" Invio programma da tavola 2")
+            End If
+         End If
+
+         If bSendToAre1 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg1, False) Then
                ' Dichiaro part program inviato
@@ -660,7 +814,7 @@ Public Class ProjectMgrUC
             End If
             m_CurrNcComm.SetProgramMainOrSub(True)
             ' Altrimenti verifico se posso scrivere nell'area 2
-         ElseIf nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2) Then
+         ElseIf bSendToAre2 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg2, False) Then
                ' Dichiaro part program inviato
@@ -680,6 +834,12 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+         ' avvio programma solo se DoubleProg
+         If (GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 And bDoubleProg) And
+            (bSendToAre1 Or bSendToAre2) Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
 
       End If
 #End If
@@ -711,8 +871,114 @@ Public Class ProjectMgrUC
       End While
    End Sub
 
+   Public Sub UpdateFeedAllMachining()
+      ' recupero il valore di Feed della lavorazione corrente
+      Dim sMachiningName As String = String.Empty
+      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
+         ' errore: lavorazione non trovata
+         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
+         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
+         Return
+      End If
+      Dim dFeed As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+      Dim dFeedStarted As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+      Dim dFeedEnded As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+      Dim dFeedTipped As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+      Dim dFeedBack As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+      Dim dFeedSideAng As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      Dim MachiningList As New List(Of SplitMach)
+
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = 1
+      ' recupero in numero di fasi presenti nel progetto
+      Dim nCountPhase As Integer = EgtGetPhaseCount()
+      ' ciclo su tutte le fasi di lavorazione
+      Dim nMach As Integer = 0
+      Dim nMachUpdated As Integer = 0
+      For IndexPhase As Integer = 1 To nCountPhase
+         ' imposto la fase corrente
+         nCurrPhase = IndexPhase
+         ' Preparo la lista delle lavorazioni
+         CalculateSplitMachList(nCurrPhase, MachiningList)
+         ' per ogni lavorazione corrente procedo ad aggiornare la feed
+         For IndexMachining As Integer = 0 To MachiningList.Count - 1
+            nMach += 1
+            Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
+            ' setto la lavorazione come corrente
+            If EgtSetCurrMachining(nOperId) Then
+               Dim bUpdate As Boolean = False
+               ' STANDARD
+               Dim dOrigFeed As Double
+               EgtGetMachiningParam(MCH_MP.FEED, dOrigFeed)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeed - dFeed) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.FEED, dFeed)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' STARTED
+               Dim dOrigFeedStarted As Double
+               EgtGetMachiningParam(MCH_MP.STARTFEED, dOrigFeedStarted)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedStarted - dFeedStarted) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' ENDED
+               Dim dOrigFeedEnded As Double
+               EgtGetMachiningParam(MCH_MP.ENDFEED, dOrigFeedEnded)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedEnded - dFeedEnded) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' TIPPED
+               Dim dOrigFeedTipped As Double
+               EgtGetMachiningParam(MCH_MP.TIPFEED, dOrigFeedTipped)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedTipped - dFeedTipped) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' BACK
+               Dim dOrigFeedBack As Double
+               EgtGetMachiningParam(MCH_MP.BACKFEED, dOrigFeedBack)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedBack) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' SIDEANG
+               Dim dOrigFeedSideAng As Double
+               EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dOrigFeedSideAng)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedSideAng) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' conto il numero di lavorazioni aggiornate
+               If bUpdate Then
+                  nMachUpdated += 1
+               End If
+            End If
+         Next
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
-   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
+   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double, SelTestTool As TestTool)
 
       Dim CmdString As String = String.Empty
       If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
@@ -738,12 +1004,23 @@ Public Class ProjectMgrUC
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
 
-      ' Recupero spessore lama corrente
-      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-      EgtTdbSetCurrTool(sSaw)
+      '' Recupero spessore lama corrente
+      'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'EgtTdbSetCurrTool(sSaw)
+      'Dim dThick As Double = 0
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      'EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+
+      EgtTdbSetCurrTool(SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLNAME", SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLALIAS", SelTestTool.ToolAlias)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+      Dim sTCPos As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+      EgtLuaSetGlobStringVar("CMD.TCPOS", sTCPos)
+
 
       '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
       ' Assegno valore ad ogni asse da muovere (in zero macchina)
@@ -802,6 +1079,7 @@ Public Class ProjectMgrUC
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
          EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       End If
       ' aggiorno il disegno
       EgtDraw()
@@ -851,6 +1129,7 @@ Public Class ProjectMgrUC
       ResetCutBtn.Visibility = Windows.Visibility.Hidden
       SimulateBtn.Visibility = Windows.Visibility.Hidden
       WorkBtn.Visibility = Windows.Visibility.Hidden
+      If TestBtn.Visibility = Windows.Visibility.Visible Then TestBtn.Visibility = Windows.Visibility.Hidden
       ' Nascondo bottoni CadCutPageUC
       m_MainWindow.m_CadCutPageUC.PhotoBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.RawPartBtn.Visibility = Windows.Visibility.Hidden
@@ -866,6 +1145,19 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Hidden
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Hidden
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden
+      End If
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Hidden
+
+      m_MainWindow.m_CadCutPageUC.m_NestPage.LoadParams()
+      ' Rendo visibili i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Visible
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Visible
+
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se c'è la foto devo sistemare
@@ -897,8 +1189,15 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
+
+      ' visualizzo i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.ON_)
+      ' eventualmente risistemo tutti i punti Spotreg in funzione dell'altezza del grezzo
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateSpotRegistration()
+      EgtDraw()
    End Sub
 
    Private Sub RegisterBtn_Unchecked(sender As Object, e As RoutedEventArgs) Handles RegisterBtn.Unchecked
@@ -926,6 +1225,7 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.DrawBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.ImportBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.SplitBtn.Visibility = Windows.Visibility.Visible
+      If TestBtn.Visibility = Windows.Visibility.Hidden Then TestBtn.Visibility = Windows.Visibility.Visible
       ' Visualizzo bottoni nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.m_bRegister = False
       m_MainWindow.m_CadCutPageUC.m_NestPage.MaximizeMoveBtn.IsEnabled = True
@@ -935,6 +1235,22 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Visible
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible
+      End If
+      ' disabilito i comandi per gestioen SpotReg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.PointRegCheckedOff()
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Hidden
+
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Visible
+
+      ' Nascondo i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+
       ' Se c'è la foto devo sistemare
       If m_CurrProjPage.GetPhoto() <> GDB_ID.NULL Then
          ' Recupero il riferimento originale del primo grezzo
@@ -979,6 +1295,11 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
+      ' nascondi i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.OFF)
+      EgtDraw()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
    End Sub
@@ -990,6 +1311,7 @@ Public Class Scrap
    Private m_iPictureID As Integer
    Private m_sName As String
    Private m_IdRaw As Integer
+   ' nState=1 -> da inserire in DB, nState=2 -> già inserito in DB
    Private m_nState As Integer
 
    Public Property PictureID() As Integer
@@ -1022,9 +1344,16 @@ Public Class Scrap
       End Get
    End Property
 
-   Public ReadOnly Property PictureString() As String
+   Public Sub ResetState(Optional nNewState As Integer = 1)
+      m_nState = nNewState
+      EgtSetInfo(m_IdRaw, K_ISNEWSCRAPS, nNewState)
+      EgtRemoveInfo(m_IdRaw, K_DATABASEID)
+   End Sub
+
+   Public ReadOnly Property PreviewState As System.Windows.Media.Imaging.BitmapImage
       Get
-         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+         Dim sPath As String = "/Resources/ImportPageListBoxImages/" & PictureID.ToString() & ".png"
+         Return New System.Windows.Media.Imaging.BitmapImage(New Uri(sPath, UriKind.Relative))
       End Get
    End Property
 

Project/ScrapsWD.xaml

@@ -22,10 +22,26 @@
             </Grid.RowDefinitions>
 
             <Label Name="TitleTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
-            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-               ItemsSource="{Binding ItemList, NotifyOnSourceUpdated=True}"/>
+            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <Grid Margin="0,2">
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="0.5*" />
+                                <ColumnDefinition Width="1*" />
+                            </Grid.ColumnDefinitions>
+                            <Image Source="{Binding PreviewState}" VerticalAlignment="Center"
+                                   MaxWidth="50" MaxHeight="50"
+                                   Stretch="Uniform" Grid.Column="0" />
+                            <TextBlock Text="{Binding Name}" VerticalAlignment="Center"
+                                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+                                        Grid.Column="1"/>
+                        </Grid>
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
 
-            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid Grid.Column="1" Grid.Row="4">
                 <Grid.ColumnDefinitions>
                     <ColumnDefinition Width="0.1*"/>
                     <ColumnDefinition Width="1*"/>

Project/StartLauncheWD.xaml.vb

@@ -96,16 +96,22 @@ Public Class StartLauncherWD
       Dim ItemFile As String = String.Empty
       'carico la liste dei file recenti
       Dim sFileName As String = String.Empty
+      Dim MruFileListRemove As New List(Of String)
       For Each ItemFile In m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
          sFileName = ItemFile.Replace("__", "_")
-         If Not String.IsNullOrEmpty(sFileName) Then
+         If Not String.IsNullOrEmpty(sFileName) AndAlso File.Exists(sFileName) Then
             m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
             m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
          Else
-            m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFile)
+            MruFileListRemove.Add(ItemFile)
          End If
       Next
 
+      For Each ItemFileRemove As String In MruFileListRemove
+         m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFileRemove)
+         EgtOutLog(" WARNING: File " & ItemFileRemove & " does not exist or is not accessible, it's been removed from MruFiles list")
+      Next
+
       ' posiziono la fistra in centro alla pagina
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2

RawPhoto/Camera.vb

@@ -205,6 +205,12 @@ Public Class Camera
       Dim nInd As Integer = 1
       If m_nCameraCount = 2 Then
          nInd = GetCurrentTable()
+         ' verifico se la macchina è configurata per fotocamera sulla tavola di lavoro
+         If (GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso
+            (GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) <> 0) Then
+            ' forzo l'utilizzo della seconda camera (sopra alla tavola di lavoro)
+            nInd = 2
+         End If
          If nInd <> 1 And nInd <> 2 Then Return 0
       End If
       ' Se gestore macchina non attivo, lo lancio in modo cieco
@@ -315,6 +321,16 @@ Public Class Camera
       GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
       Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
 
+      ' eventualmente rimuovo inizio stringa: "PLC, ___"
+      Dim sItemString1() As String = Split(sPLCVarSpotLight1, ","c)
+      If sItemString1.Count > 1 Then
+         sPLCVarSpotLight1 = sItemString1(1).Trim
+      End If
+      Dim sItemString2() As String = Split(sPLCVarSpotLight2, ","c)
+      If sItemString2.Count > 1 Then
+         sPLCVarSpotLight2 = sItemString2(1).Trim
+      End If
+
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
          Case 1, 2
             If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then

RawPhoto/ChooseMachining.xaml.vb

@@ -175,20 +175,24 @@ Public Class ChooseMachining
 
       End Select
 
-      ' verifico che lista delle lavorazioni di lama non sia vuoto
-      If m_SawingList.Count > 0 Then
-         ' provo ad assegnare la lama corrente (se l'associazione fallisce corrispoende ad impostare un campo vuoto)
-         CurrSawingCmBx.SelectedItem = m_MainWindow.m_CurrentMachine.sCurrSawing
+      If m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+
       Else
-         m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
-      End If
-      ' se non riesco a fare l'assegnazione della lama allora elimino il nome della lama salvata
-      If String.IsNullOrEmpty(CurrSawingCmBx.SelectedItem) Then
-         ' verifico che il nome della lama esista
-         If CurrSawingCmBx.SelectedItem <> m_MainWindow.m_CurrentMachine.sCurrSawing Then
-            m_MachIsModified = True
+         ' verifico che lista delle lavorazioni di lama non sia vuoto
+         If m_SawingList.Count > 0 Then
+            ' provo ad assegnare la lama corrente (se l'associazione fallisce corrispoende ad impostare un campo vuoto)
+            CurrSawingCmBx.SelectedItem = m_MainWindow.m_CurrentMachine.sCurrSawing
+         Else
+            m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
+         End If
+         ' se non riesco a fare l'assegnazione della lama allora elimino il nome della lama salvata
+         If String.IsNullOrEmpty(CurrSawingCmBx.SelectedItem) Then
+            ' verifico che il nome della lama esista
+            If CurrSawingCmBx.SelectedItem <> m_MainWindow.m_CurrentMachine.sCurrSawing Then
+               m_MachIsModified = True
+            End If
+            m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
          End If
-         m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
       End If
 
       ' definizione della lista delle lavorazioni secondarie -- DA RIMUOVERE COMPLETAMENTE --

RawPhoto/OtherRefTabWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="OtherRefTabWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="ModifStartEndWD" Height="250" Width="320" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <!--<RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>-->
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.2*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="RefRawTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            
+            <ComboBox Name="RefTabModeCmBx" Grid.Column="2" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <TextBlock Name="RefTabXTxbl" Grid.Column="1" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabXTxBx" Grid.Column="2" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="RefTabYTxbl" Grid.Column="1" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabYTxBx" Grid.Column="2" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

RawPhoto/OtherRefTabWD.xaml.vb

@@ -0,0 +1,108 @@
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class OtherRefTabWD
+   Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Dim m_RawPartPage As RawPartPageUC
+
+   Private m_sPosX As String = "0"
+   Private m_sPosY As String = "0"
+
+   Private m_dPrevOffsetX As Double = 0
+   Private m_dPrevOffsetY As Double = 0
+
+   Private m_SelIndex As Integer = 0
+
+   Sub New(Owner As Window, PosX As String, PosY As String, OffsetX As Double, OffsetY As Double, OtherRefMode As Integer)
+      Me.Owner = Owner
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_sPosX = PosX
+      m_sPosY = PosY
+      m_dPrevOffsetX = OffsetX
+      m_dPrevOffsetY = OffsetY
+      m_SelIndex = OtherRefMode
+   End Sub
+
+   Private Sub OtherRrefTabWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' costruisco il riferimento alla pagina Raw
+      m_RawPartPage = m_MainWindow.m_RawPartPage
+      ' posiziono la finestra
+      Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
+      RefRawTxbl.Text = "Raw reference"
+      RefTabXTxbl.Text = "Position X"
+      RefTabYTxbl.Text = "Position Y"
+      RefTabModeCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList
+      RefTabModeCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
+   End Sub
+
+   Private Sub OtherRrefTabWD_Load(sender As Object, e As EventArgs) Handles Me.Loaded
+      RefTabXTxBx.Text = m_sPosX
+      RefTabYTxBx.Text = m_sPosY
+   End Sub
+
+   Private Sub RefTabModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabModeCmBx.SelectionChanged
+      m_RawPartPage.m_OtherRefTabPos = RefTabModeCmBx.SelectedIndex
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+   Private Sub RefTabXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabXTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dX As Double = 0
+         StringToLen(RefTabXTxBx.Text, dX)
+         If Not (dX > 0 And dX < ptMax.x - ptMin.x) Then
+            If dX > 0 Then
+               dX = ptMax.x - ptMin.x
+            Else
+               dX = 0
+            End If
+            RefTabXTxBx.Text = LenToString(dX, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabX = dX
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub RefTabYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabYTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dY As Double = 0
+         StringToLen(RefTabYTxBx.Text, dY)
+         If Not (dY > 0 And dY < ptMax.y - ptMin.y) Then
+            If dY > 0 Then
+               dY = ptMax.y - ptMin.y
+            Else
+               dY = 0
+            End If
+            RefTabYTxBx.Text = LenToString(dY, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabY = dY
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABX, DoubleToString(RefTabXTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABY, DoubleToString(RefTabYTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      Me.Close()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' riposiziono l'origine
+      m_RawPartPage.m_OtherRefTabX = m_sPosX
+      m_RawPartPage.m_OtherRefTabY = m_sPosY
+      ' ripristino il valore della combobox
+      m_RawPartPage.m_OtherRefTabPos = m_SelIndex
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml

@@ -6,76 +6,76 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="RawPartPage_Loaded" Initialized="RawPartPage_Initialized" Unloaded="RawPartPage_Unloaded">
-      
-   <!-- Definizione della RowPartPage -->
-   <Grid Name="RowPartPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-         
-      </Grid>
-      
-      <!-- Definizione della Grid Laterale -->
-      <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
-      
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="4*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
 
-         <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               GroupName="DefinitionMethod_GrezzoUC"/>
-         <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
+    <!-- Definizione della RowPartPage -->
+    <Grid Name="RowPartPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid per definizione grezzo -->
-         <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid Laterale -->
+        <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
+
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="4*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
-               MaxDropDownHeight="300" Margin="6,0,6,0">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+            <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               GroupName="DefinitionMethod_GrezzoUC"/>
+            <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
 
-            <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+            <!-- Definizione della Grid per definizione grezzo -->
+            <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
                MaxDropDownHeight="300" Margin="6,0,6,0">
                     <ComboBox.ItemTemplate>
                         <DataTemplate>
@@ -85,114 +85,125 @@
                 </ComboBox>
 
                 <TextBlock Name="LengthTxBl" Grid.Row="1" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
+                <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
+                <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
+                <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
+                <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
+                <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         </Grid>
-                  
-         <!-- Definizione della Grid per il materiale -->
-         <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </Grid>
 
-            <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
+            <!-- Definizione della Grid per il materiale -->
+            <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+
+                <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
                MaxDropDownHeight="600">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
+            <!-- Definizione della Grid per Punti -->
+            <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
 
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn"
+                    <ToggleButton Name="AddBtn"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+                    <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" 
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            </Grid>
-            
-         </GroupBox>
+                    <Button Name="RectangleBtn" Grid.Row="1" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                </Grid>
 
-         <!-- Definizione della Grid per Zona rovinata -->
-         <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </GroupBox>
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <!-- Definizione della Grid per Zona rovinata -->
+            <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
 
-               <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            </Grid>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-         </GroupBox>
+                    <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                    <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                </Grid>
 
-         <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
+            </GroupBox>
+
+            <TextBlock Name="OtherRefTabTxBl" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="OtherRefTabChBx" Grid.Row="5" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox}"
+                    HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+            <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
             Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-      </Grid>
-      
-      <!-- Definizione della Grid Inferiore per i Button V e X -->
-      <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="6*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
+        </Grid>
 
-         <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+        <!-- Definizione della Grid Inferiore per i Button V e X -->
+        <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-         <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="OkBtn" Grid.Column="5" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OtherRefTabBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OkBtn" Grid.Column="6" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-         </Button>
-         
-      </Grid>
-      
-   </Grid>
-   
+            </Button>
+
+        </Grid>
+
+    </Grid>
+
 </UserControl>

RawPhoto/RawPartPageUC.xaml.vb

@@ -1,6 +1,9 @@
 Imports System.Globalization
+Imports System.IO
+Imports System.Windows.Media.Animation
 Imports EgtUILib
 Imports EgtWPFLib
+Imports Microsoft.VisualBasic.Devices
 
 Public Class RawPartPageUC
 
@@ -78,6 +81,16 @@ Public Class RawPartPageUC
    ' Costante raggio cerchietto
    Private Const RAD_CIRCLE As Double = 30
 
+   ' Riferimento grezzo
+   Private m_bEnableOtherRefTab As Boolean = False
+   Private m_bOtherRefTab As Boolean
+   Public m_OtherRefTabX As Double = 0
+   Public m_OtherRefTabY As Double = 0
+   Public m_OtherRefTabList(3) As String
+   Public m_OtherRefTabPos As Integer = 0
+   Private m_nOtherRefTabLay As Integer = GDB_ID.NULL
+   Private m_OtherRefTabPoint As Point3d
+
    ' mostra la pagina delle lavorazioni
    Private m_SmartMachiningPage As Boolean = False
 
@@ -105,6 +118,13 @@ Public Class RawPartPageUC
       FROM_SAW = 7
    End Enum
 
+   Private Enum OTHERREFMODE As Integer
+      BL = 0
+      BR = 1
+      TR = 2
+      TL = 3
+   End Enum
+
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
 
       'Creazione della Page UserControl e relative impostazioni
@@ -145,6 +165,13 @@ Public Class RawPartPageUC
          ReDim Preserve m_RawModeListEx(3)
       End If
       RawModeCmBx.ItemsSource = m_RawModeList
+
+      ' Creo la lista dei riferimenti tavola 
+      m_OtherRefTabList(OTHERREFMODE.BL) = "Bottom left"
+      m_OtherRefTabList(OTHERREFMODE.BR) = "Bottom right"
+      m_OtherRefTabList(OTHERREFMODE.TR) = "Top right"
+      m_OtherRefTabList(OTHERREFMODE.TL) = "Top left"
+
       ' lista per selezione RawModeDamaged
       m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
       m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
@@ -183,7 +210,10 @@ Public Class RawPartPageUC
       AddBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 14)           'Add - Aggiungi
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
+      RectangleBtn.Content = "Rectangle"
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
+
+      OtherRefTabTxBl.Text = "New Ref On Tab"
    End Sub
 
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -277,6 +307,12 @@ Public Class RawPartPageUC
             Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
          End If
       End If
+
+      ' Carico le info del riferimento alternativo della tavola
+      m_nOtherRefTabLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      LoadOtherRefTab()
+
       ' Assegno dati grezzo rettangolare ai textbox
       LengthTxBx.Text = LenToString(m_RawLength, 2)
       WidthTxBx.Text = LenToString(m_RawWidth, 2)
@@ -293,6 +329,7 @@ Public Class RawPartPageUC
          RawModeCmBx.SelectedIndex = RAWMODE.BY_POINTS
          PointsGpBx.Visibility = Windows.Visibility.Visible
          CloseBtn.Visibility = Windows.Visibility.Hidden
+         RectangleBtn.Visibility = Windows.Visibility.Hidden
          ' Visualizzo crocette
          UpdateCircles()
          EgtZoom(ZM.ALL)
@@ -320,6 +357,38 @@ Public Class RawPartPageUC
       Next
    End Sub
 
+   Private Sub LoadOtherRefTab()
+      m_bEnableOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_ENABLEOTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      If Not m_bEnableOtherRefTab Then
+         OtherRefTabBtn.Visibility = Visibility.Collapsed
+         OtherRefTabChBx.Visibility = Visibility.Collapsed
+         OtherRefTabTxBl.Visibility = Visibility.Collapsed
+         Return
+      Else
+         OtherRefTabBtn.Visibility = Visibility.Visible
+      End If
+      m_bOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_OTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_OtherRefTabX = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABX, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabY = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABY, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabPos = GetPrivateProfileInt(S_RAWPART, K_OTHERREFTABPOS, 0, m_MainWindow.GetIniFile())
+      ' RefTabPosCmbx.SelectedIndex = m_OtherRefTabPos
+      OtherRefTabChBx.IsChecked = m_bOtherRefTab
+      ' se riferimento tavola differente da quello atteso
+      If m_bOtherRefTab Then
+         ' dasibilito la modifica dei parametri di Offset
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+         UpdateOffsetText()
+      End If
+
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      ' EgtDraw()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -689,6 +758,8 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
       ' Non è possibile uscire con tastatura in corso
       If m_bProbingOn Then Return
       ' reimposto il comando OutLine
@@ -854,6 +925,7 @@ Public Class RawPartPageUC
             RawModeView()
             ' Disattivo il bottone
             CloseBtn.IsEnabled = False
+            RectangleBtn.IsEnabled = False
             OkBtn.IsEnabled = False
          Case 3          ' Da Lama
             If Not m_MainWindow.m_CurrentMachine.bSaw Then    ' Da fotografia
@@ -886,6 +958,7 @@ Public Class RawPartPageUC
             RawModeView()
             ' Disattivo il bottone
             CloseBtn.IsEnabled = False
+            RectangleBtn.IsEnabled = False
             OkBtn.IsEnabled = False
          Case 4          ' Da fotografia
             ' Se ero in modalità da laser
@@ -930,6 +1003,13 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = True
+               OtherRefTabBtn.IsEnabled = True
+               ' disegno il riferimento
+               m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+               CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+            End If
          Case RAWMODE.BY_POINTS
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -943,9 +1023,16 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 2)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 2)
             CloseBtn.Visibility = Windows.Visibility.Hidden
+            RectangleBtn.Visibility = Windows.Visibility.Hidden
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            ' disettivo la possibilità di modificare il riferimento 
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -959,9 +1046,15 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED
             RawModeCmBx.IsEnabled = False
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -976,10 +1069,16 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 2)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 2)
             CloseBtn.Visibility = Windows.Visibility.Hidden
+            RectangleBtn.Visibility = Windows.Visibility.Hidden
             ' Attivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_PHOTO
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -992,6 +1091,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ' Visualizzo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Visible
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1005,9 +1109,15 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1021,9 +1131,15 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -1037,14 +1153,30 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
       End Select
+      ' se abilitato nuovo riferimento del grezzo disabilito le text per offset
+      If OtherRefTabChBx.IsChecked Then
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+      End If
    End Sub
 
    Private Sub OutlineBtn_Click(sender As Object, e As RoutedEventArgs) Handles OutlineBtn.Click
       If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
+         If m_bEnableOtherRefTab Then
+            OtherRefTabTxBl.Visibility = Visibility.Visible
+            OtherRefTabBtn.Visibility = Visibility.Visible
+            OtherRefTabChBx.Visibility = Visibility.Visible
+         End If
          ' m_ActiveRawMode = RAWMODE.BY_POINTS
          m_ActiveRawMode = m_PrecActiveRawMode
          RawModeCmBx.SelectedIndex = m_ActiveRawMode
@@ -1055,6 +1187,12 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub DamagedBtn_Click(sender As Object, e As RoutedEventArgs) Handles DamagedBtn.Click
+      If m_bEnableOtherRefTab Then
+         OtherRefTabTxBl.Visibility = Visibility.Hidden
+         OtherRefTabBtn.Visibility = Visibility.Hidden
+         OtherRefTabChBx.Visibility = Visibility.Hidden
+         OtherRefTabBtn.IsEnabled = False
+      End If
       m_PrecActiveRawMode = m_ActiveRawMode
       If m_PrecActiveRawMode = RAWMODE.FROM_LASER Then
          m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
@@ -1072,6 +1210,9 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub AddBtn_Click(sender As Object, e As RoutedEventArgs) Handles AddBtn.Click
+      ' disabilito i comandi di chiusura contorno
+      CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
       Select Case m_ActiveRawMode
          Case RAWMODE.RECTANGLE
             AddBtn.IsChecked = False
@@ -1120,9 +1261,15 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            ' Se ho almeno un segmento allora deve essere la diagonale
+            If m_CurveXKerfList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXKerfList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1168,9 +1315,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXKerfList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXKerfList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1226,9 +1378,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXDamagedAreaList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXDamagedAreaList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1274,9 +1431,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXDamagedAreaList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXDamagedAreaList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1296,7 +1458,7 @@ Public Class RawPartPageUC
       Dim nExit As Integer = 0
       EgtGetCalcTool(sTool, sHead, nExit)
       ' Imposto come testa corrente il laser (senza utensile ovviamente)
-      If Not EgtSetCalcTool("", "H3", 1) Then
+      If Not EgtSetCalcTool("", LASER_HEAD, 1) Then
          Return False
       End If
       ' Trasformo in posizione punta utensile in basso
@@ -1308,6 +1470,10 @@ Public Class RawPartPageUC
       ' Porto il tip nell'origine tavola
       ptAcquired = ptTipP1
       ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+      EgtOutLog("Actual axis laser H3: L1=" & dL1.ToString & ", L2=" & dL2.ToString & ", L3=" & dL3.ToString &
+                   ", R1=" & dR1.ToString & ", R2=" & dR2.ToString)
+      EgtOutLog("Actual pos  laser H3: " & ptTipP1.x.ToString & "," & ptTipP1.y.ToString & "," & ptTipP1.z.ToString &
+                "; on table: " & ptAcquired.x.ToString & "," & ptAcquired.y.ToString & "," & ptAcquired.z.ToString)
       Return True
    End Function
 
@@ -1325,6 +1491,8 @@ Public Class RawPartPageUC
       EgtGetCalcTool(sTool, sHead, nExit)
       ' Trasformo in posizione punta utensile in basso
       If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTipP1) Then
+         EgtOutLog("Actual pos " & sHead & ": L1=" & dL1.ToString & ", L2=" & dL2.ToString & ", L3=" & dL3.ToString &
+                   ", R1=" & dR1.ToString & ", R2=" & dR2.ToString)
          Return False
       End If
       ' Porto il tip nell'origine tavola
@@ -1355,6 +1523,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXKerfList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXKerfList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1375,6 +1554,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXKerfList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXKerfList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1405,6 +1595,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXDamagedAreaList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1425,6 +1626,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXDamagedAreaList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1843,6 +2055,7 @@ Public Class RawPartPageUC
          WidthTxBx.Text = LenToString(m_RawWidth, 2)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 17) & " " & LenToString(dMaxWidth, 2))   'Massima larghezza =
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub HeightTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HeightTxBx.EgtClosed
@@ -1872,6 +2085,7 @@ Public Class RawPartPageUC
          HeightTxBx.Text = LenToString(m_RawHeight, 3)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 18)) 'Non sono ammessi spessori negativi
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub OffsetXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetXTxBx.EgtClosed
@@ -1918,6 +2132,109 @@ Public Class RawPartPageUC
       End If
    End Sub
 
+#Region "OTHERREFTAB"
+
+   Private Sub OtherRefTabChBx_Click(sender As Object, e As EventArgs) Handles OtherRefTabChBx.Click
+      If OtherRefTabChBx.IsChecked Then
+         m_bOtherRefTab = True
+         MoveRawToOtherRefTab()
+      Else
+         m_bOtherRefTab = False
+         'MoveRawToMaiRefTab()
+      End If
+      UpdateOffsetText()
+      RawModeView()
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTAB, If(m_bOtherRefTab, "1", "0"), m_MainWindow.GetIniFile())
+   End Sub
+
+   Public Sub RefTabModeChange()
+      If Not m_bOtherRefTab Then Return
+      MoveRawToMaiRefTab()
+      MoveRawToOtherRefTab()
+      UpdateRefTabDraw()
+      UpdateOffsetText()
+   End Sub
+
+   Public Sub UpdateRefTabDraw()
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      EgtDraw()
+   End Sub
+
+   Private Sub UpdateOffsetText()
+      Dim ptRawMin, ptRawMax As Point3d
+      Dim dInvertKerf As Double = 1
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ' kerf
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_KERF, m_RawKerf)
+         ' verifico se il kerf è negativo
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_INVERT_KERF, dInvertKerf)
+         ' aggiorno dati grezzo
+         If dInvertKerf < 0 Then
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y
+         Else
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x + m_RawKerf * dInvertKerf
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y + m_RawKerf * dInvertKerf
+         End If
+         OffsetXTxBx.Text = LenToString(m_RawOffsX, 2)
+         OffsetYTxBx.Text = LenToString(m_RawOffsY, 2)
+      End If
+   End Sub
+
+   Private Sub MoveRawToOtherRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.BR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub MoveRawToMaiRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.BL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub OtherRefTabBtn_Click(sender As Object, e As EventArgs) Handles OtherRefTabBtn.Click
+      ' apro la finestra per gestire il riferimento
+      Dim OthWD As New OtherRefTabWD(m_MainWindow, LenToString(m_OtherRefTabX, 2), LenToString(m_OtherRefTabY, 2), m_RawOffsX, m_RawOffsY, m_OtherRefTabPos)
+      OthWD.ShowDialog()
+   End Sub
+
+#End Region    ' OtherRefTab
+
    Private Sub KerfTxBx_EgtClosed(sender As Object, e As EventArgs) Handles KerfTxBx.EgtClosed
       Dim dKerf As Double
       If Not StringToLen(KerfTxBx.Text, dKerf) Then
@@ -1960,6 +2277,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf >= dMinKerf And dKerf < 0 Then
@@ -2022,6 +2341,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf < dMinKerf Then
@@ -2267,6 +2588,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Unloaded(sender As Object, e As RoutedEventArgs)
       ' Rimuovo layer temporaneo per crocette
       EgtErase(m_nTempLay)
+      EgtErase(m_nOtherRefTabLay)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -2339,6 +2661,21 @@ Public Class RawPartPageUC
       EgtEmptyGroup(m_nTempLay)
    End Sub
 
+   Private Sub RectangleBtn_Click(sender As Object, e As RoutedEventArgs) Handles RectangleBtn.Click
+      Select Case m_ActiveRawMode
+         Case RAWMODE.DAMAGED_BY_LASER
+            CloseDamagedAreaByLaser_Rectangle()
+         Case RAWMODE.DAMAGED_BY_SAW
+            CloseDamagedAreaBySaw_Rectangle()
+         Case RAWMODE.FROM_SAW
+            CloseRawBySaw_Rectangle()
+         Case Else
+            CloseRawByLaser_Rectangle()
+      End Select
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+   End Sub
+
    Private Sub CloseRawByLaser()
       ' Verifico ci siano punti
       If m_CurveXKerfList.Count() = 0 Then Return
@@ -2373,6 +2710,33 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseRawByLaser_Rectangle()
+      ' Verifico ci siano punti
+      If m_CurveXKerfList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima e unica linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXKerfList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXKerfList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXKerfList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      'CurveXKerfArray(3) = EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptStart)
+      'm_CurveXKerfList.Add(CurveXKerfArray(3))
+      CloseRawByLaser()
    End Sub
 
    Private Sub CloseRawBySaw()
@@ -2409,6 +2773,33 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseRawBySaw_Rectangle()
+      ' Verifico ci siano punti
+      If m_CurveXKerfList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima e unica linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXKerfList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXKerfList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXKerfList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      'CurveXKerfArray(3) = EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptStart)
+      'm_CurveXKerfList.Add(CurveXKerfArray(3))
+      CloseRawBySaw()
    End Sub
 
 #Region "Damaged Area"
@@ -2465,6 +2856,32 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseDamagedAreaByLaser_Rectangle()
+      ' Verifico che esista una sola linea
+      If m_CurveXDamagedAreaList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXDamagedAreaList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXDamagedAreaList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXDamagedAreaList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXDamagedAreaList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      ' procedo a costruire il rettangolo
+      CloseDamagedAreaByLaser()
    End Sub
 
    Private Sub CloseDamagedAreaBySaw()
@@ -2491,6 +2908,32 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseDamagedAreaBySaw_Rectangle()
+      ' Verifico che esista una sola linea
+      If m_CurveXDamagedAreaList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXDamagedAreaList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXDamagedAreaList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXDamagedAreaList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXDamagedAreaList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      ' procedo a costruire il rettangolo
+      CloseDamagedAreaBySaw()
    End Sub
 
    Private Sub RemoveDamagedArea()
@@ -2582,4 +3025,43 @@ Public Class RawPartPageUC
       Return True
    End Function
 
+   Private Function CreateOtherRefTab(nLayerId As Integer, ptP As Point3d) As Boolean
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      If Not m_bOtherRefTab Or Not OtherRefTabChBx.IsEnabled Then
+         EgtDraw()
+         Return False
+      End If
+
+      If File.Exists(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge") Then
+         ' Aggiungo disegno staffa fermo pezzo
+         EgtInsertFile(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge")
+         Dim nLastPart As Integer = EgtGetLastPart()
+         Dim Lay As Integer = EgtGetFirstInGroup(nLastPart)
+         Dim Ent As Integer = EgtGetFirstInGroup(Lay)
+         While Ent <> -1
+            Dim NextEnt As Integer = EgtGetNext(Ent)
+            EgtRelocate(Ent, nLayerId)
+            EgtMove(Ent, ptP - Point3d.ORIG)
+            EgtRotate(Ent, ptP, Vector3d.Z_AX, 90 * m_OtherRefTabPos)
+            Ent = NextEnt
+         End While
+         EgtErase(nLastPart)
+      Else
+         ' Aggiungo crocette
+         ptP += New Vector3d(0, 0, 0.15)
+         Dim vtCrossX As New Vector3d(100, 0, 0)
+         Dim vtCrossY As New Vector3d(0, 100, 0)
+         Dim vtCrossZ As New Vector3d(0, 0, 100)
+         Dim nCrossId1 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossX)
+         EgtSetColor(nCrossId1, New Color3d(245, 0, 0))
+         Dim nCrossId2 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossY)
+         EgtSetColor(nCrossId2, New Color3d(0, 245, 0))
+         Dim nCrossId3 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossZ)
+         EgtSetColor(nCrossId3, New Color3d(0, 0, 245))
+      End If
+
+      EgtDraw()
+      Return True
+   End Function
+
 End Class

Simulation/SimulationPageUC.xaml

@@ -240,10 +240,10 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
-         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateXPIUC_Click">
+         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateCN_Click">
                 <Image Source="{DynamicResource GenerateCNImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtnUC_Click">
+         <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>
 

Simulation/SimulationPageUC.xaml.vb

@@ -77,7 +77,7 @@ Public Class SimulationPageUC
       End If
       ' Pulsante Play
       PlayPauseImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Play.png", UriKind.Relative))
-      ' abilito la visualizzazione del pulsante per la sola generazione del codice CN
+      ' abilito la visualizzazione del pulsante per la generazione del codice CN (se previsto)
       If GetPrivateProfileInt(S_GENERAL, K_GENERATECN, 0, m_MainWindow.GetIniFile()) <> 0 Then
          GenerateCN_Btn.Visibility = Visibility.Visible
       Else
@@ -535,7 +535,7 @@ Public Class SimulationPageUC
       End If
    End Sub
 
-   Private Sub ExitBtnUC_Click(sender As Object, e As RoutedEventArgs)
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs)
       ' Mi assicuro di terminare la simulazione
       ResetSimulation()
       ' Nascondo tutte le lavorazioni
@@ -566,62 +566,23 @@ Public Class SimulationPageUC
 
    End Sub
 
-   Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
-      ' eventualmente fermo la simulazione
+   Private Sub GenerateCN_Click(sender As Object, e As RoutedEventArgs)
+      ' Se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
+      Dim IsPressedShiftKey As Boolean = False
+      If Keyboard.Modifiers And ModifierKeys.Shift Then IsPressedShiftKey = True
+
+      ' Eventualmente fermo la simulazione
       m_nStatus = MCH_SIM_ST.UI_STOP
       m_bPlay = False
       PlayPauseBtn_Click(Nothing, Nothing)
 
-      ' se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
-      Dim IsPressedShiftKey As Boolean = False
-      If Keyboard.Modifiers And ModifierKeys.Shift Then
-         IsPressedShiftKey = True
-      End If
-      Dim bOk As Boolean = True
-      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
-      ' Elimino eventuale attrezzaggio da OmagOFFICE
-      EgtEraseCurrSetup()
-      ' Verifico l'attrezzaggio degli utensili utilizzati
-      Dim sMissingTools As String = String.Empty
-      If Not VerifySetup(sMissingTools) Then
-         m_CurrProjPage.SetErrorMessage(EgtMsg(90322) & " " & sMissingTools)  'Mancano gli utensili : ... 
+      ' Se versione ufficio non genero
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
          Return
       End If
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Aggiorno flag per lavaggio
-      m_CurrProjPage.UpdateWashingFlag()
-      ' Aggiorno flag per tastatura per tagli con angolo di fianco
-      m_CurrProjPage.UpdateSideAngCutProbeFlag()
-      ' Se pezzi piani e non c'è ordine delle lavorazioni, ricalcolo tutto e ne faccio uno automatico
-      Dim nPrjType As Integer = m_CurrProjPage.GetCurrentProjectType()
-      Dim bDirectCut As Boolean = (GetDirectCutPart() <> GDB_ID.NULL)
-      If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
-         Not bDirectCut And
-         Not m_CurrProjPage.GetOrderMachiningFlag() Then
-         ResetAllMachinings()
-         bOk = SortAllMachinings()
-         If bOk Then
-            m_CurrProjPage.SetOrderMachiningFlag()
-            Dim bModif As Boolean = TestAllMachiningsForStrict()
-            If bModif Then
-               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
-            Else
-               m_CurrProjPage.SetInfoMessage(EgtMsg(90399))        'Aggiornate tutte le lavorazioni
-            End If
-            EgtDraw()
-         End If
-      End If
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Disabilito impostazione modificato
-      EgtDisableModified()
-      ' Aggiorno le lavorazioni
-      bOk = UpdateAllMachiningsToolpaths() And bOk
-      ' Aggiorno posizionamento ventose sui pezzi per eventuali tagli da sotto con lama
-      bOk = UpdateVacuumsForDrip() And bOk
-      ' Costringo ad aggiornare UI
-      UpdateUI()
+
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Inserisco indice di progetto
       m_CurrProjPage.SetProjectIndexFlag()
       ' Inserisco il materiale
@@ -631,45 +592,22 @@ Public Class SimulationPageUC
       m_CurrProjPage.SaveFile(sMchPath)
       ' Costringo ad aggiornare UI
       UpdateUI()
-      ' Se modalità Ufficio, copio il progetto ed esco
-      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
-         ' Ripristino come fase corrente quella iniziale
-         EgtSetCurrPhase(1)
-         ' Chiedo il nome del file esportato
-         Dim MySaveNameWD As New SaveNameWD(m_MainWindow, SaveNameWD.SAVE_TYPE.PRJ_COPY)
-         MySaveNameWD.ShowDialog()
-         Return
+
+      ' Nome e path del file CN da generare
+      Dim sFileName As String = ""
+      ' Se in Tagli Diretti
+      If m_MainWindow.DirectCutBtn.IsChecked And Not m_MainWindow.CadCutBtn.IsChecked Then
+         sFileName = "DirectCut"
+      ' Altrimenti in Tagli Cad
+      Else
+         Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
+         Dim sIndexTab As String = If( nIndexTab > 0, nIndexTab.ToString, "")
+         sFileName = "CadCut" & sIndexTab
       End If
-      ' Se presente ripartenza, ne chiedo conferma
-      Dim nPhaseRestart As Integer = m_CurrProjPage.GetProjectNcRestart()
-      If nPhaseRestart <> 0 Then
-         ' Confermi ripartenza dalla fase NNN ?
-         Dim AskNcRestart As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90326), nPhaseRestart),
-                                        EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL, 2)
-         Select Case AskNcRestart.m_nPressedBtn
-            Case 1         ' YES
-            Case 2         ' NO
-               EgtEnableModified()
-               m_CurrProjPage.ResetProjectNcRestart()
-               nPhaseRestart = 0
-               EgtDisableModified()
-            Case Else      ' CANCEL
-               Return
-         End Select
-      End If
-      ' Se abilitate, eseguo le stime
-      If GetPrivateProfileInt(S_MACH_ESTIMATIONS, K_ENABLEEST, 0, m_MainWindow.GetMachIniFile()) <> 0 Then
-         EgtEstimate(m_MainWindow.GetTempDir() & "\MachProj.html", "OmagCut ver." & m_MainWindow.GetVersion())
-      End If
-      ' Genero file CNC (lancio anche se errore in precedenza) -> recupero la tavola corrente! CamAuto.GetCurrentTable()
-      Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
-      Dim sIndexTab As String = String.Empty
-      If nIndexTab > 0 Then
-         sIndexTab = nIndexTab.ToString
-      End If
-      Dim sFileName As String = "CadCut" & sIndexTab
       Dim sCncPath As String = m_MainWindow.GetCncDir() & "\" & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt
-      bOk = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion()) And bOk
+
+      ' Genero file CNC
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
       ' Costringo ad aggiornare UI
       UpdateUI()
       ' Ripristino come fase corrente quella iniziale
@@ -679,7 +617,7 @@ Public Class SimulationPageUC
       Else
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
       End If
-      ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+      ' procedo all'apertura del file CadCut1 appena generato (solo se generazione corretta)
       If bOk And IsPressedShiftKey Then
          Try
             Process.Start("Notepad.exe", sCncPath)

Utility/Utility.vb

@@ -25,18 +25,18 @@ Module Utility
       StopWatch.Start()
    End Sub
 
-   Friend Function TimeSpanEnd()
-        Dim sTime As String = ""
-        If Not IsNothing(StopWatch) Then
-            StopWatch.Stop()
-            Dim ts As TimeSpan = StopWatch.Elapsed
-            sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
-        End If
-        Return sTime
-    End Function
+   Friend Function TimeSpanEnd() As String
+      Dim sTime As String = ""
+      If Not IsNothing(StopWatch) Then
+         StopWatch.Stop()
+         Dim ts As TimeSpan = StopWatch.Elapsed
+         sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
+      End If
+      Return sTime
+   End Function
 
-    '--------------------------------------------------------------------------------------------------
-    Friend Sub UpdateUI()
+   '--------------------------------------------------------------------------------------------------
+   Friend Sub UpdateUI()
       ' Costringo ad aggiornare UI
       Dim nDummy As Integer
       Application.Current.Dispatcher.Invoke(Windows.Threading.DispatcherPriority.Background, _

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib
+Imports OmagCUT.VeinMatchingWindow
 
 Public Class VeinMatchingWindow
 
@@ -19,13 +20,20 @@ Public Class VeinMatchingWindow
    Private m_nIdToSel As Integer = GDB_ID.NULL
    Private m_nIdToDesel As Integer = GDB_ID.NULL
 
+   Enum ALETTE
+      F = 2
+      A = 1
+   End Enum
+
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
       VeinMatchingSceneHost.Child = VeinMatchingScene
       VeinMatchingSceneHost.SetValue(Grid.ColumnProperty, 1)
       Me.VeinMatchingGrid.Children.Add(VeinMatchingSceneHost)
       ' Per non farla visualizzare alla creazione
-      Me.Left = 32000
+      If GetPrivateProfileInt(S_VEINMATCHING, K_VEINMA_ENABLE, 0, m_MainWindow.GetIniFile()) = 1 Then
+         Me.Left = 32000
+      End If
       ' Assegno messaggi
       NewBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 3)
       ExportBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 10)
@@ -267,7 +275,7 @@ Friend Module VeinMatching
       Dim nRegId As Integer = EgtGetFirstInGroup(nRegLayId)
       While nRegId <> GDB_ID.NULL
          If EgtGetType(nRegId) = GDB_TY.SRF_FRGN Then
-               Exit While
+            Exit While
          End If
          nRegId = EgtGetNext(nRegId)
       End While
@@ -364,19 +372,19 @@ Friend Module VeinMatching
       ' Imposto il contesto del progetto
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Riattivo il gruppo di lavoro
-      EgtSetCurrMachGroup( EgtGetFirstMachGroup())
+      EgtSetCurrMachGroup(EgtGetFirstMachGroup())
       ' Verifico quali pezzi sono nel grezzo, per dichiararlo al VM
-      nId = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+      nId = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
       While nId <> GDB_ID.NULL
          ' Dichiaro pezzo nel grezzo per VM
-         VeinMatching.OnInsertPartInRaw( nId)
+         VeinMatching.OnInsertPartInRaw(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPartInRawPart(nId)
       End While
       ' Ripristino visualizzazione di eventuali pezzi in parcheggio
       ShowParkedParts()
       ' Ripristino il contesto corrente
-      EgtSetCurrentContext( nCurrCtx)
+      EgtSetCurrentContext(nCurrCtx)
       Return True
    End Function
 
@@ -422,11 +430,11 @@ Friend Module VeinMatching
       nCurrId = EgtGetFirstNameInGroup(nVeinId2, NAME_PREVIEW)
       EgtSetStatus(nCurrId, GDB_ST.OFF)
       ' Se esiste OutLoop.orig OutLoop -> OutLoop.mach e OutLoop.orig -> OutLoop
-      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP & ".orig")
+      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP & ".orig")
       If nOutLoopOrig <> GDB_ID.NULL Then
-         Dim nOutLoop As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP)
-         EgtSetName( nOutLoop, NAME_OUTLOOP & ".mach")
-         EgtSetName( nOutLoopOrig, NAME_OUTLOOP)
+         Dim nOutLoop As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP)
+         EgtSetName(nOutLoop, NAME_OUTLOOP & ".mach")
+         EgtSetName(nOutLoopOrig, NAME_OUTLOOP)
       End If
       ' Se necessario, ripristino il contesto originale
       If nCurrCtx > 0 Then EgtSetCurrentContext(nCurrCtx)
@@ -555,8 +563,8 @@ Friend Module VeinMatching
 
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
-         End If
-         EgtDraw()
+      End If
+      EgtDraw()
       EgtSetCurrentContext(nMainCtx)
       Return True
    End Function
@@ -1039,37 +1047,44 @@ Friend Module VeinMatching
    End Function
 
    Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
-
+      ' A: alzatina, F: frontalino
       Dim nType As Integer
       If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
 
-      Dim ptSRef, ptERef, ptE As Point3d
+      Dim ptSRef, ptERef, ptS, ptE As Point3d
+      ' Piano cucina
       If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
       If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      ' AlzFront
+      If Not EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptS) Then Return False
       If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
 
+      ' vettore lato cucina
+      Dim vtRotRef As Vector3d = ptERef - ptSRef
+      ' vettore lato AlzFront
+      Dim vtRot As Vector3d = ptE - ptS
+
       ' ruoto il solido intorno al lato di riferimento
-      Dim vtRot As Vector3d = ptERef - ptSRef
-      If nType = 1 Then
-         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
-      ElseIf nType = 2 Then
+      If nType = ALETTE.A Then
          EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+      ElseIf nType = ALETTE.F Then
+         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
       End If
 
       ' punto di riferimento per la traslazione sul solido
       Dim ptSolid As Point3d
-      If nType = 1 Then
+      If nType = ALETTE.A Then
          ' cerco id della curva che definisce la front face
          Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
          Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
-         EgtStartPoint(nFrontCrvId, ptSolid)
-      ElseIf nType = 2 Then
-         EgtStartPoint(Item.SideId, ptSolid)
+         EgtStartPoint(nFrontCrvId, GDB_ID.ROOT, ptSolid)
+      ElseIf nType = ALETTE.F Then
+         EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptSolid)
       End If
 
-      Dim ItemFrame As New Frame3d
-      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
-      ptSolid.ToGlob(ItemFrame)
+      ' Dim ItemFrame As New Frame3d
+      ' If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ' ptSolid.ToGlob(ItemFrame)
 
       'punto di riferimento per la traslazione sul piano cucina
       Dim ptKitchen As Point3d = ptERef
@@ -1077,6 +1092,16 @@ Friend Module VeinMatching
       Dim vtMove As Vector3d = ptKitchen - ptSolid
       EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
 
+      ' eventualmente ruoto per allineare l'alzatina al piano cucina
+      Dim dLRef, dAngVRef, dAngHRef As Double
+      vtRotRef.ToSpherical(dLRef, dAngVRef, dAngHRef)
+      Dim dL, dAngV, dAngH As Double
+      vtRot.Rotate(Vector3d.Z_AX, 180)
+      vtRot.ToSpherical(dL, dAngV, dAngH)
+      Dim dDelta As Double = dAngHRef - dAngH
+      If Math.Abs(dDelta) < EPS_ANG_SMALL Then Return True
+      EgtRotate(Item.PartId, ptKitchen, Vector3d.Z_AX, dDelta, GDB_RT.GLOB)
+
       Return True
    End Function
 
@@ -1151,6 +1176,8 @@ Friend Module VeinMatching
       ' Esporto il file come immagine
       EgtSetCurrentContext(m_nVeinCtx)
       Dim bOk As Boolean = (EgtGetFileType(sFilePath) = FT.IMG)
+      m_nImgWidth = GetPrivateProfileDouble(S_VEINMATCHING, K_VEINMA_WIDTH, m_nImgWidth, m_MainWindow.GetIniFile)
+      m_nImgHeight = GetPrivateProfileDouble(S_VEINMATCHING, K_VEINMA_HEIGHT, m_nImgHeight, m_MainWindow.GetIniFile)
       bOk = bOk AndAlso EgtGetImage(EgtGetShowMode(), New Color3d(255, 255, 255), New Color3d(255, 255, 255),
                                     m_nImgWidth, m_nImgHeight, sFilePath)
       ' Ripristino il contesto originale
@@ -1206,7 +1233,7 @@ Friend Module VeinMatching
       ' Se necessario, cambio contesto
       If m_nVeinCtx <> nCurrCtx Then
          If EgtSetCurrentContext(m_nVeinCtx) Then
-            Return If( nCurrCtx > 0, nCurrCtx, -2)
+            Return If(nCurrCtx > 0, nCurrCtx, -2)
          Else
             Return 0
          End If
@@ -1268,7 +1295,7 @@ Friend Module VeinMatching
       While nId <> GDB_ID.NULL
          Dim nOriId As Integer
          If EgtGetInfo(nId, KEY_ORI_ID, nOriId) AndAlso nOriId = nPartId Then
-               Exit While
+            Exit While
          End If
          nId = EgtGetNextPart(nId)
       End While

WorkInProgress/WorkInProgressPageUC.xaml.vb

@@ -189,25 +189,33 @@ Public Class WorkInProgressPageUC
       ' Valori precedenti degli assi macchina
       Dim dL1p, dL2p, dL3p, dR1p, dR2p As Double
       Dim bFirst As Boolean = True
+
       ' Gestione fase di lavoro
       Dim sPhaseVar As String = String.Empty
-      GetPrivateProfileString(S_MACH_INPROGRESS, K_PHASEVAR, "E80020", sPhaseVar, m_MainWindow.GetMachIniFile())
-      m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
-      m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(sPhaseVar, 3)
-      System.Threading.Thread.Sleep(100)
       Dim nCurrPhase = 1
-      If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
-         nCurrPhase = CInt(m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value)
+      Dim bCurrPhaseExists As Boolean = False
+      If GetPrivateProfileString(S_MACH_INPROGRESS, K_PHASEVAR, "E80020", sPhaseVar, m_MainWindow.GetMachIniFile()) <> 0 Then
+         bCurrPhaseExists = True
+         m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
+         m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(sPhaseVar, 3)
+         System.Threading.Thread.Sleep(100)
+         If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
+            nCurrPhase = CInt(m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value)
+         End If
+         EgtSetCurrPhase(nCurrPhase, True)
+         EgtDraw()
+      Else
+         EgtOutLog("Variabile 'PhaseVar' mancante! In CurrentMachine non sarà aggiornata la fase del grezzo")
       End If
-      EgtSetCurrPhase(nCurrPhase, True)
-      EgtDraw()
+
       ' Tempo di ritardo nel ciclo
       Dim nTimeStep As Integer = 50
       nTimeStep = GetPrivateProfileInt(S_MACH_INPROGRESS, K_WP_STEPTIME, nTimeStep, m_MainWindow.GetMachIniFile())
+      EgtOutLog("Tempo di attesa tra una lettura degli assi e la successiva: " & nTimeStep.ToString & " (ms)")
       ' Ciclo
       While m_bContinue
          ' Rileggo la variabile di fase
-         m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(sPhaseVar, 3)
+         If bCurrPhaseExists Then m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(sPhaseVar, 3)
          ' Recupero la posizione degli assi macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
@@ -238,7 +246,7 @@ Public Class WorkInProgressPageUC
          ' Per evitare di ciclare rapidissimamente e consumare inutilmente CPU
          System.Threading.Thread.Sleep(nTimeStep)
          ' Leggo la fase
-         If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
+         If bCurrPhaseExists AndAlso m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
             m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
             Dim nNextPhase As Integer = CInt(m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value)
             If nNextPhase > nCurrPhase Then
@@ -263,12 +271,12 @@ Public Class WorkInProgressPageUC
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       ' aggiorno lo stato
       Select Case m_nMachLook
-      Case MCH_LOOK.ALL
-         m_nMachLook = MCH_LOOK.TAB_HEAD
-      Case MCH_LOOK.TAB_HEAD
-         m_nMachLook = MCH_LOOK.TAB_TOOL
-      Case Else
-         m_nMachLook = MCH_LOOK.ALL
+         Case MCH_LOOK.ALL
+            m_nMachLook = MCH_LOOK.TAB_HEAD
+         Case MCH_LOOK.TAB_HEAD
+            m_nMachLook = MCH_LOOK.TAB_TOOL
+         Case Else
+            m_nMachLook = MCH_LOOK.ALL
       End Select
       ' aggiorno lo stato della macchina e la sua visualizzazione
       EgtSetMachineLook(m_nMachLook)
@@ -309,7 +317,7 @@ Public Class WorkInProgressPageUC
       Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
       WorkInProgressScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
       ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-      Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+      Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Or m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_LIGHT)
       If Not WorkInProgressScene.Init() Or Not bProd Then
          ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
          Me.WorkInProgressPageGrid.Children.Remove(WorkInProgressSceneHost)
@@ -320,16 +328,30 @@ Public Class WorkInProgressPageUC
 #Else
          ' Se manca la chiave
          If m_MainWindow.GetKeyLevel() = -1 Or m_MainWindow.GetKeyLevel() = -2 Then
-            EgtOutLog("Missing Dongle")
-            ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
-            Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
-            Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
-         ' Altrimenti manca la licenza
+            If Not EgtGetNetHwKey() Then
+               EgtOutLog("Missing Dongle")
+               ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
+               Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
+               Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            Else
+               EgtOutLog("NetDongle is full")
+               ' Box di avviso slot chiave di rete occupato : "Chiave di Rete completamente occupata. \n Uscire dal programma su un altro PC." "Errore"
+               Dim sText As String = EgtMsg(10110) & vbCrLf & EgtMsg(10111)
+               Dim sTitle As String = EgtMsg(10101)
+               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            End If
+         ElseIf m_MainWindow.GetKeyLevel() = -9 Then
+            EgtOutLog("Missing Link with Net Dongle")
+            ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione." "Errore"
+            Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
+            Dim sTitle As String = EgtMsg(10101)
+            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            ' Altrimenti manca la licenza
          Else
             EgtOutLog("Problems with Licence")
             ' Box di avviso licenza con problemi : "Programma senza licenza. \n Caricala e riavvia il programma."  "Errore"
-            Dim sKeyInfo As String = "" : EgtGetKeyInfo( sKeyInfo)
+            Dim sKeyInfo As String = "" : EgtGetKeyInfo(sKeyInfo)
             Dim sText As String = sKeyInfo & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 5) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 6)
             Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
             Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 0, 2)
@@ -360,7 +382,7 @@ Public Class WorkInProgressPageUC
          End If
 #End If
          m_MainWindow.Close()
-         If bRestart Then Process.Start( Application.ResourceAssembly.Location)
+         If bRestart Then Process.Start(Application.ResourceAssembly.Location)
          Return True
       End If
       ' dimensione lineare max in pixel delle textures
@@ -389,19 +411,19 @@ Public Class WorkInProgressPageUC
       ' Imposto il giusto contesto
       Dim bOk As Boolean = EgtSetCurrentContext(WorkInProgressScene.GetCtx())
       ' Svuoto le teste
-      EgtResetHeadSet( "H1")
-      EgtResetHeadSet( "H2")
+      EgtResetHeadSet("H1")
+      EgtResetHeadSet("H2")
       ' Imposto la lama corrente
       Dim sSaw As String = GetFirstTool()
       If bOk Then
-         If Not EgtSetCalcTool( sSaw, "H1", 1) Then bOk = False
+         If Not EgtSetCalcTool(sSaw, "H1", 1) Then bOk = False
       End If
       ' Imposto eventuale secondo utensile montato
       If bOk Then
          Dim sHead As String = ""
          Dim nExit As Integer = 0
-         Dim sTool As String = GetSecondTool( sHead, nExit)
-         If Not String.IsNullOrEmpty( sTool) AndAlso Not EgtLoadTool( sHead, nExit, sTool) Then
+         Dim sTool As String = GetSecondTool(sHead, nExit)
+         If Not String.IsNullOrEmpty(sTool) AndAlso Not EgtLoadTool(sHead, nExit, sTool) Then
             bOk = False
          End If
       End If
@@ -414,7 +436,7 @@ Public Class WorkInProgressPageUC
       Return m_MainWindow.m_CurrentMachine.sCurrSaw
    End Function
 
-   Private Function GetSecondTool( ByRef sHead As String, ByRef nExit As Integer) As String
+   Private Function GetSecondTool(ByRef sHead As String, ByRef nExit As Integer) As String
       ' Se non previsto secondo utensile, non c'è
       If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
          Return ""
@@ -454,17 +476,17 @@ Public Class WorkInProgressPageUC
       ' Trasformo in posizione punta utensile in basso
       If bOk Then
          ' Calcolo standard con utensile principale (lama)
-         If Not EgtGetCalcTipFromPositions( dL1, dL2, dL3, dR1, dR2, True, ptTip) Then bOk = False
+         If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTip) Then bOk = False
          ' Se testa verticale e presente altro utensile, rifaccio calcolo con questo
          Dim vtTool As Vector3d
-         If EgtGetCalcToolDirFromAngles( dR1, dR2, vtTool) AndAlso ( vtTool - Vector3d.Z_AX()).IsSmall() Then
+         If EgtGetCalcToolDirFromAngles(dR1, dR2, vtTool) AndAlso (vtTool - Vector3d.Z_AX()).IsSmall() Then
             Dim sHead As String = ""
             Dim nExit As Integer = 0
-            Dim sTool As String = GetSecondTool( sHead, nExit)
-            If Not String.IsNullOrEmpty( sTool) AndAlso EgtSetCalcTool( sTool, sHead, nExit) Then
+            Dim sTool As String = GetSecondTool(sHead, nExit)
+            If Not String.IsNullOrEmpty(sTool) AndAlso EgtSetCalcTool(sTool, sHead, nExit) Then
                ' Calcolo secondo tip
                Dim ptTip2 As Point3d
-               If EgtGetCalcTipFromPositions( dL1, dL2, dL3, dR1, dR2, True, ptTip2) Then
+               If EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTip2) Then
                   ptTip = ptTip2
                End If
                ' Ripristino configurazione standard