Merge commit '6613b3d551b2f06a1940fcd7b1c2dd9ca6743bd5'

- piccola modifica di testa per tagli di separazione lastra prolungabili da un solo lato.

AboutBox/AboutBoxWD.xaml

@@ -36,7 +36,7 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Border Name="LogoBrd" Grid.Column="1">
-               <Image Source="../Resources/AboutBoxImage.png" Stretch="Uniform"/>
+                    <Image Source="../Resources/NewIcons/Logo-Egalware (3).png" Stretch="Uniform"/>
             </Border>
          </Grid>
          <TextBlock Name="DescriptionLbl" Grid.Column="1" Grid.Row="3" HorizontalAlignment="Center"

CAM/CamAuto.vb

@@ -47,6 +47,26 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   ' versione CamAuto 2.6l1: gestione tagli con ridotto affondamento
+   Friend Function AddWaterJetMachining(LocaList As List(Of Integer), ByRef nWarn As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      For i As Integer = 0 To LocaList.Count - 1
+         EgtLuaSetGlobIntVar("CAM.TAB_OPERID." & (i + 1).ToString, LocaList(i))
+      Next
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJets")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
    Friend Function EraseMachinings(nPartId As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       EgtLuaSetGlobIntVar("CAM.PARTID", nPartId)
@@ -543,6 +563,7 @@ Friend Module CamAuto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
       ' Ciclo sulle lavorazioni
       Dim nOperId As Integer = EgtGetFirstOperation()
+      Dim LocalListOperId As New List(Of Integer)
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida di taglio con lama
          If IsValidMachining( nOperId) And EgtGetOperationType( nOperId) = MCH_OY.SAWING Then
@@ -557,12 +578,14 @@ Friend Module CamAuto
                ' se abilitato e attivo waterjet, lo aggiungo per completare il taglio
                If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
                   Dim nWarn As Integer = 0
-                  AddWaterJetMachining(nOperId, nWarn)
+                  LocalListOperId.Add(nOperId)
+                  'AddWaterJetMachining(nOperId, nWarn)
+               End If
                End If
-            End If
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
+      If LocalListOperId.Count > 0 Then AddWaterJetMachining(LocalListOperId, 0)
       Return bModified
    End Function
 

CadCuts/CSVPage.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <!--Griglia per oscurare i bottoni della pagina sottostante-->
-            <Grid Background="{DynamicResource OmagCut_Gray}">
+         <Grid Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
@@ -49,7 +49,7 @@
 
          <Label Name="CsvPathTxBl" Grid.Row="1" Background="White" FontSize="16" VerticalAlignment="Center" Padding="2,5,0,5"/>
 
-            <TreeView Name="PartsTreeView" Grid.Row="2" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+         <TreeView Name="PartsTreeView" Grid.Row="2" Background="{StaticResource OmagCut_TreeViewGradientGray}">
             <TreeView.Resources>
                <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
@@ -62,7 +62,7 @@
                      </Grid.ColumnDefinitions>
 
                      <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0,8,6,4" />
-                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" />
+                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" Foreground="Black" />
 
                   </Grid>
 
@@ -123,7 +123,10 @@
                         </Setter>
                         <Style.Triggers>
                            <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                              <Setter Property="Foreground" Value="{StaticResource OmagCut_LightGray}"/>
+                              <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                              <Setter Property="Foreground" Value="Black"/>
                            </DataTrigger>
                         </Style.Triggers>
                      </Style>
@@ -131,18 +134,25 @@
                </HierarchicalDataTemplate>
                <!--Modifico DataTemplate del ToolItem per poter inserire immagine e testo-->
                <DataTemplate DataType="{x:Type self:PartCustomItem}">
-                  <Grid Width="246" Margin="0,5,0,5" HorizontalAlignment="Right">
+                  <Grid Width="234.8" Margin="0,5,0,5" HorizontalAlignment="Right">
                      <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="1*"/>
                         <ColumnDefinition Width="60"/>
                         <ColumnDefinition Width="1*"/>
                      </Grid.ColumnDefinitions>
 
-                     <TextBlock Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
-                     <TextBlock Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
-                     <TextBlock Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
+                     <TextBlock x:Name="TbName"  Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
+                     <TextBlock x:Name="TbText1" Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
+                     <TextBlock x:Name="TbText2" Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
 
                   </Grid>
+                  <DataTemplate.Triggers>
+                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                        <Setter TargetName="TbName" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText1" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText2" Property="TextDecorations" Value="Strikethrough" />
+                     </DataTrigger>
+                  </DataTemplate.Triggers>
                </DataTemplate>
             </TreeView.Resources>
 

CadCuts/CadCutPageUC.xaml.vb

@@ -2,6 +2,7 @@
 Imports EgtWPFLib
 Imports System.Reflection
 Imports System.Globalization
+Imports EgtWPFLib5
 
 Public Class CadCutPageUC
 

CadCuts/MoveRawPartPage.xaml.vb

@@ -127,11 +127,10 @@ Public Class MoveRawPartPage
          UnloadPartsBtn.Content = "Go to MOVE part"
          ' altrimenti, aggiorno visualizzazione
       ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
-         EgtDraw()
          UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
       '---------------------------- AUX TABLE ---------------------------- 
-
+      EgtDraw()
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
@@ -860,6 +859,12 @@ Public Class MoveRawPartPage
       Return bOk
    End Function
 
+   Private Sub RemovePart_KeyCancel(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles m_CurrProjPage.OnKeyCancelDownScene
+      If e.KeyCode = System.Windows.Forms.Keys.Delete Then
+         RemovePartBtn_Click(Nothing, Nothing)
+      End If
+   End Sub
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -927,6 +932,7 @@ Public Class MoveRawPartPage
       ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
       RefreshVisibility()
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
@@ -1362,7 +1368,7 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_SplitPage.m_bShow Then
          ' verifico se la fase successiva è uno scarico frontale
          If NextOperationIsUnloading(m_nCurrDisposition) Then

CadCuts/NestPageUC.xaml.vb

@@ -220,17 +220,21 @@ Public Class NestPageUC
          m_nCountSpot = 0
          m_nCountSpotCUT = 0
       End If
+      EgtOutLog("Numero di SPOT caricati da OFFICE: " & m_nCountSpot.ToString)
       ' Se nel progetto non sono inseriti punti SpotReg disabilito i comandi
       If m_nCountSpot < 1 Then
          UG0_Reg.IsEnabled = False
          UG1_Reg.IsEnabled = False
+         EgtOutLog("   Abilito comandi gestione SPOT")
       Else
          UG0_Reg.IsEnabled = True
          UG1_Reg.IsEnabled = True
+         EgtOutLog("   Disabilito comandi gestione SPOT")
       End If
       ' Se nel progetto non sono inseriti punti SpotRegCUT provvedo ad aggiungerli
       If m_nCountSpotCUT < 1 Then
          InsertSpotRegistration()
+         EgtOutLog("      Creo SPOT_CUT")
       End If
 
       ' Se necessario riabilito impostazione modificato

CadCuts/SplitAuto.vb

@@ -117,7 +117,7 @@ Public Module SplitAuto
                   End If
                   ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
                   If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
-                     Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
+                     Mach.m_sLay = NAME_OUTLOOP And ( Mach.m_nInterf And FMI_TYPE.RM) = 0 Then
                      Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
                      Dim bIn As Boolean = False
                      Dim bOut As Boolean = False

CadCuts/SplitPageUC.xaml.vb

@@ -457,21 +457,7 @@ Public Class SplitPageUC
 #End Region    ' Bridge
 
    Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene_DoubleClick
-      If MachiningLsBx.SelectedItems.Count = 1 Then
-         OnMyMouseDownScene(sender, e)
-         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
-         Dim nI As Integer = x.Ind
-         If m_MachiningList(nI).m_bEnabled Then
-            m_MachiningList(nI).m_bEnabled = False
-            x.bIsActive = False
-         Else
-            m_MachiningList(nI).m_bEnabled = True
-            x.bIsActive = True
-         End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
-         EgtDraw()
-      End If
+      OnOffCut()
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
@@ -585,6 +571,11 @@ Public Class SplitPageUC
          m_nDragInd = -1
          m_nDragType = 0
          m_nSelected = GDB_ID.NULL
+         If Not IsNothing(MachiningLsBx.SelectedItem) Then
+            MarkMachining(MachiningLsBx.SelectedItem.Ind, False)
+            EgtDraw()
+         End If
+         MachiningLsBx.SelectedIndex = -1
       End If
    End Sub
 
@@ -714,6 +705,11 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub MachiningLsBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles MachiningLsBx.SelectionChanged
+      ' se non attiva la modifica allora esco
+      If m_bShow Then
+         MachiningLsBx.SelectedIndex = -1
+         Return
+      End If
       If MachiningLsBx.SelectedItems.Count = 0 Then Return
       If MachiningLsBx.SelectedItems.Count = 1 Then m_bAreHomogeneous = True
       ' creo lista ordinata dei selezionati
@@ -755,21 +751,10 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub MachiningLsBx_MouseDoubleClick(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.MouseDoubleClick
+      ' se disabilitata la modifica allora esco
+      If m_bShow Then Return
       If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
-      If MachiningLsBx.SelectedItems.Count = 1 Then
-         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
-         Dim nI As Integer = x.Ind
-         If m_MachiningList(nI).m_bEnabled Then
-            m_MachiningList(nI).m_bEnabled = False
-            x.bIsActive = False
-         Else
-            m_MachiningList(nI).m_bEnabled = True
-            x.bIsActive = True
-         End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
-         EgtDraw()
-      End If
+      OnOffCut()
    End Sub
 
    Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
@@ -1890,7 +1875,7 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_bShow Then
          Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
          ' recupero l'operazione successiva
@@ -1973,22 +1958,22 @@ Public Class SplitPageUC
          NumberDirectionMachining(nI)
       Next
 
-      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      ' -------------------- Recupero le lavorazioni indicate come attive -- INIZIO --------------------
       Dim ActiveMachLst As New List(Of Integer)
       For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
-         ActiveMachLst.Add(ItemSplitMach.Ind)
+         If ItemSplitMach.bIsActive Then ActiveMachLst.Add(ItemSplitMach.Ind)
       Next
-      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      ' -------------------- Recupero le lavorazioni indicate come attive --  FINE  --------------------
 
       ' Preparo la lista degli Item
       ShowMachiningList()
 
-      ' -------------------- Riattivo le lavorazioni precedenti --------------------
-
+      ' -------------------- Riattivo le lavorazioni precedenti -- INIZIO --------------------
       For Each Item As SplitMach In m_MachiningList
+         ' spengo tutte le lavorazioni disponibili
          EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
       Next
-
+      ' riattivo solo quelle indicate come attive
       For nIndex As Integer = 0 To ActiveMachLst.Count - 1
          For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
             If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
@@ -2001,7 +1986,7 @@ Public Class SplitPageUC
             End If
          Next
       Next
-      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+      ' -------------------- Riattivo le lavorazioni precedenti --  FINE  --------------------
 
       ' Aggiorno visualizzazione
       EgtDraw()
@@ -2199,6 +2184,33 @@ Public Class SplitPageUC
 
    End Sub
 
+   Private Sub OnOffCut()
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+         ' Imposto flag di modifica
+         m_bModified = True
+         ' recupero l'elenco degli elementi selezionati
+         Dim ItemList As New List(Of NameIdLsBxItem)
+         For Each Item As NameIdLsBxItem In MachiningLsBx.SelectedItems
+            ItemList.Add(Item)
+         Next
+         VerifyHomogenousMachining(ItemList)
+         ' Abilitazione bottone Next
+         EnableButtons()
+      End If
+   End Sub
+
    Private Sub VerifyHomogenousMachining(ItemList As List(Of NameIdLsBxItem))
       If IsNothing(ItemList) OrElse ItemList.Count = 0 Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()

Constants/ConstMachIni.vb

@@ -129,6 +129,7 @@
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
    Public Const K_NAXES As String = "nAxes"
+   Public Const K_RESETSTATUS As String = "ResetStatus"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -181,6 +182,9 @@
    Public Const K_PHOTO_TAB2_OFFSETY As String = "Tab2OffsetY"
    Public Const K_PHOTO_HQ_OFFSETX As String = "HQOffsetX"
    Public Const K_PHOTO_HQ_OFFSETY As String = "HQOffsetY"
+   Public Const K_CAMERA_DIRECT_CMD As String = "CameraDirectCmd"
+   Public Const K_CAMERA_STATE_VAR As String = "CameraStateVar"
+   Public Const K_ENABELE_GOHOME_FOR_PHOTO As String = "EnableGoHomeForPhoto"
 
    Public Const S_TOOLS As String = "Tools"
    Public Const K_DRILLBIT As String = "Drillbit"

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -755,8 +755,17 @@ Public MustInherit Class MachineButton
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
+
+      ' versione 2.6h1
+      Dim sCurrTable As String = String.Empty
+      Dim nCuttTable As Integer = 1
+      EgtGetTableName(sCurrTable)
+      If sCurrTable <> "MainTab" Then nCuttTable = 2
+      EgtLuaSetGlobIntVar("CMD.TABLE", nCuttTable)
+
       EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
+
+      ' Leggo variabili da file Lua
       CmdString = String.Empty
       EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
       b2Start = False

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -53,14 +53,43 @@ Public Class ManualAxesMoveUC
       ' Imposto check per considerare spessore lama
       L1SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
       L2SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
+
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      EgtDraw()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
    End Sub
 
    Private Sub ManualAxesMove_UnLoaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       m_Timer.Stop()
       m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove = (L1SawThChBx.IsEnabled And L1SawThChBx.IsChecked) Or
                                                          (L2SawThChBx.IsEnabled And L2SawThChBx.IsChecked)
+      ' Nascondo la macchina
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+      EgtSetMachineLook(MCH_LOOK.TAB)
+      EgtDraw()
    End Sub
 
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
    Private Sub UpdateAxesNames()
       Dim sL1 As String = String.Empty
       Dim sL2 As String = String.Empty
@@ -125,11 +154,16 @@ Public Class ManualAxesMoveUC
    Private Sub Timer_tick()
       UpdateAxesNames()
       UpdateUseSawThickness()
+      ' Aggiorno posizione macchina in disegno
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private m_MoveClicked As Boolean = False
    Private Sub XXBtn_Click(sender As Object, e As MouseButtonEventArgs) Handles L1Btn.PreviewMouseDown, L2Btn.PreviewMouseDown, L3Btn.PreviewMouseDown, R1Btn.PreviewMouseDown, R2Btn.PreviewMouseDown
       If e.ClickCount > 1 OrElse m_MoveClicked Then
+         EgtOutLog(" → Hold on! Do not click compulsively.")
          Return
       End If
       m_MoveClicked = True
@@ -216,6 +250,7 @@ Public Class ManualAxesMoveUC
    Private Sub SiemensMoveAxis(CurrentBtn As Button)
       ' leggo se stato reset
       If Not m_CN.bResetState Then
+         EgtOutLog("Reset status is 'False', is denied to execute file '\DirectCmd\AxesMove.lua'.")
          m_MoveClicked = False
          Return
       End If

DirectCuts/SawTestUC.xaml.vb

@@ -530,6 +530,10 @@ Public Class SawTestUC
       ElseIf nWSide = MCH_SAW_WS.LEFT Then
          vtPerp = vtDir
          vtPerp.Rotate(Vector3d.Z_AX, +90)
+      Else
+         m_CurrProjPage.ClearMessage()
+         ' 91143 = Set machining side: right or left.
+         m_CurrProjPage.SetInfoMessage(EgtMsg(91143))
       End If
       Dim ptEnd As Point3d = ptStart + vtDir * m_dLen + vtPerp * dThick
       Dim dLen2 As Double = m_dLen / 2

LicenseWindow.xaml

@@ -3,15 +3,15 @@
         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
         xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
         FontFamily="{DynamicResource OmagCut_Font}"
-        Title="OpenFile" Height="500.6" Width="426.6" WindowStyle="None"         
+        Title="OpenFile" Height="587.4" Width="500.6" WindowStyle="None"         
         ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
         Background="Transparent">
     <Border Style="{DynamicResource OmagCut_Border}">
         <Grid>
             <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="0.2*"/>
                 <ColumnDefinition Width="4*"/>
-                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="0.2*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
                 <RowDefinition Height="0.5*"/>
@@ -36,7 +36,7 @@
             <StackPanel Grid.Column="1" Grid.Row="2"  Orientation="Horizontal"
                         HorizontalAlignment="Center">
                 <ScrollViewer Name="MyScrollViewer" VerticalScrollBarVisibility="Auto">
-                <TextBlock Name="LicenseMsgTxBl" MaxWidth="340"
+                <TextBlock Name="LicenseMsgTxBl" MaxWidth="425"
                        HorizontalAlignment="Center"
                        Foreground="{DynamicResource Omag_White}" FontSize="20" VerticalAlignment="Center"
                        TextWrapping="Wrap"/>

LicenseWindow.xaml.vb

@@ -17,7 +17,7 @@
 
    Public Sub Init() Handles Me.Initialized
       IconTxBl.Text = "⚠️"
-      LicenseTxBl.Text = "Warning" & vbCrLf & m_sTitle
+      LicenseTxBl.Text = m_sTitle
       m_sMessage = m_sMessage.Replace("/n", "£")
       Dim sItems As String() = m_sMessage.Split("£")
       For Index As Integer = 0 To sItems.Count - 1

Machine/AlarmsPageUC.xaml.vb

@@ -1265,7 +1265,7 @@ Public Class AlarmsPageUC
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
       ' Creo MsgBox di attesa
-      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_DIRECTCUTPAGEUC + 41), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
+      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, String.Format(EgtMsg(MSG_DIRECTCUTPAGEUC + 41), ToolForProbing.m_ToolName), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
       m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
       ' Definisco flag tastatura
       Dim bProbingOk As Boolean = False

Machine/CurrentMachine.vb

@@ -1662,7 +1662,9 @@ Public Class CurrentMachine
       Dim dToolDiam As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam)
       ' Confronto con massimo ammesso
-      Return (dToolDiam <= dMaxSawDiamForProbe)
+      Dim bOk As Boolean = dToolDiam <= dMaxSawDiamForProbe
+      If Not bOk Then EgtOutLog("WARNING: Saw diameter to big for probing")
+      Return bOk
    End Function
 
    Friend Function GetPrivateProfileMaterial(

MainWindow.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <Border Name="LogoBrd" Background="Transparent">
-                <Image Source="{DynamicResource LogoOmagImg}" Stretch="Uniform" Margin="1"/>
+                <Image Source="../Resources/NewIcons/logo-OmCut.png" Stretch="Uniform" Margin="1"/>
          </Border>
 
          <!-- ** Definizione della Grid delle tab ** -->

MainWindow.xaml.vb

@@ -343,8 +343,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2607, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2607, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2612, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2612, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
@@ -461,6 +461,7 @@ Class MainWindow
       If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
          Not File.Exists(m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
+         EgtOutLog("Warning: Missing file 'TestWork.lua' in folder 'DirectCmd', buttun 'TEST' collapsed!")
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
       End If
@@ -655,26 +656,35 @@ Class MainWindow
 
       Dim sAssStatus As String = " discontinued"
       Dim nAssLeftDays As Integer
+      ' MESSAGGIO...
       If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
-         If nAssLeftDays > 30 Then
+         If nAssLeftDays > 0 Then
             sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
-         ElseIf nAssLeftDays > 0 Then
-            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+            'sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
          Else
-            sAssStatus = "to be renewed by today"
+            sAssStatus = "Expired"
          End If
       End If
 
+
       ' Or nAssLeftDays = 358
-      If (nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28 Then
-         Dim sMsg As String = EgtMsg(91141)   ' Assistenza in scadenza /nContattare assistenza:/n
+      If (nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28 Or nAssLeftDays = 39 Then
+         ' 91145=Avviso importante
+         Dim sMsg_Title As String = EgtMsg(91145)
+         ' 91146=Il contratto di aggiornamento della licenza in uso scadrà tra {0} giorni./n
+         Dim sMsg_AssStatus As String = String.Format(EgtMsg(91146), nAssLeftDays.ToString())
+         ' 91147=Se desiderate rimanere aggiornati e continuare ad usufruire dei benefici del servizio, vi invitiamo a contattare la nostra assistenza al seguente indirizzo:/n
+         Dim sMsg_RefAssistance As String = EgtMsg(91147)
          Dim sAssistance As String = String.Empty
          GetPrivateProfileString(S_GENERAL, "Assistances", "", sAssistance, GetIniFile)
          Dim sItems As String() = sAssistance.Split(","c)
          For Each Item As String In sItems
-            sMsg &= " → " & Item.Trim & " /n"
+            sMsg_RefAssistance &= " → " & Item.Trim & " /n"
          Next
-         Dim MyLicWn As New LicenseWindow(Me, sMsg, "Assistance " & sAssStatus)
+         ' 91148=Grazie per la vostra collaborazione.
+         Dim sMsg_ThankYou As String = EgtMsg(91148)
+         Dim MyLicWn As New LicenseWindow(Me, sMsg_AssStatus & sMsg_RefAssistance & sMsg_ThankYou, sMsg_Title)
+         MyLicWn.WindowStartupLocation = WindowStartupLocation.CenterOwner
          MyLicWn.Show()
       End If
 
@@ -1326,7 +1336,7 @@ Class MainWindow
       If m_OnlyFrame Then
          If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
             m_ActivePage <> Pages.RawPart And m_ActivePage <> Pages.DirectCut And m_ActivePage <> Pages.Simulation Then
-            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91142), EgtMsg(91143), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91141), EgtMsg(91142), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
             '' Gestione stato FastGrid
             'm_CadCutPageUC.m_FastGridSlabManager.OnPreNewProject()
             ' Cancello progetto salvato con nome da file ini

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.7.6")>
-<Assembly: AssemblyFileVersion("2.6.7.6")>
+<Assembly: AssemblyVersion("2.6.12.1")>
+<Assembly: AssemblyFileVersion("2.6.12.1")>

NcComm/CNCommunication.vb

@@ -247,6 +247,7 @@ Public Class CNCommunication
       For Each proc As System.Diagnostics.Process In pList
          If proc.ProcessName.ToString = sAppName Then
             proc.Kill()
+            EgtOutLog("ProcessKill : " & """" & sProcessName & """")
          End If
       Next
    End Sub
@@ -388,6 +389,9 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumOff, sVal)
          GetPrivateProfileString(S_NCDATA, K_BYPASSTATE, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
+         ' ver 2.6i1 : nuova gestione SiemensONE
+         GetPrivateProfileString(S_NCDATA, K_RESETSTATUS, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.ResetStatus, sVal)
 
          ' nuove variabili: stato dei nuovi pulsanti
          nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
@@ -484,7 +488,12 @@ Public Class CNCommunication
                                        End If
                                        nVarType = VarType.TBoolean
                                        m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayBool)
-                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayBool, ItemIndex, nVarType))
+                                       Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayBool, ItemIndex, nVarType)
+                                       If sItem.Count = 3 Then
+                                          ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                          NewRefFlafSiemens.DefaultValue = sItem(2)
+                                       End If
+                                       ListReferenceIndex.Add(NewRefFlafSiemens)
                                        nIndexArrayBool += 1
                                     Case 1
                                        If nIndexArrayInt > 14 Then
@@ -539,7 +548,12 @@ Public Class CNCommunication
                                           Next
                                           nVarType = VarType.TInteger
                                           m_CN.DVariables_Read_Subscription(sVarName, nVarType, nIndexArrayInt_1)
-                                          ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit))
+                                          Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit)
+                                          If sItem.Count = 3 Then
+                                             ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                             NewRefFlafSiemens.DefaultValue = sItem(2)
+                                          End If
+                                          ListReferenceIndex.Add(NewRefFlafSiemens)
                                           If Not bFound Then
                                              nIndexArrayInt += 1
                                              ListIndexToVar.Add(New IndexArrayToBit(nIndexArrayInt_1, sVarName.Trim))
@@ -1213,6 +1227,7 @@ Public Class CNCommunication
             Dim nFlag As Integer = ListReferenceIndex(IndxLst).FlagIndex
             Dim nIndex As Integer = ListReferenceIndex(IndxLst).SiemnesArrayIndex
             Dim nIndexBit As Integer = ListReferenceIndex(IndxLst).IndexBit
+            Dim sDefaultValue As String = ListReferenceIndex(IndxLst).DefaultValue
             Dim b_temp As Boolean = False
             Dim n_temp As Integer = 0
             Dim l_temp As Long = 0.0
@@ -1220,11 +1235,31 @@ Public Class CNCommunication
             ' leggo il valore caricato 
             Select Case nType
                Case VarType.TBoolean
-                  b_temp = m_CN.b_data(nIndex)
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default boolean value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = m_CN.b_data(nIndex)
+                     End Try
+                  Else
+                     b_temp = m_CN.b_data(nIndex)
+                  End If
                Case VarType.TInteger
                   n_temp = m_CN.n_data(nIndex)
                   ' VENTOSE: lettura dato da intero Bit a Bit (ver_2.6h1), ritorno un Boolean
-                  b_temp = ReadBit(nIndexBit, n_temp)
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default bit value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = ReadBit(nIndexBit, n_temp)
+                     End Try
+                  Else
+                     b_temp = ReadBit(nIndexBit, n_temp)
+                  End If
                Case VarType.TLong
                   l_temp = m_CN.l_data(nIndex)
                Case VarType.TDouble
@@ -1342,6 +1377,8 @@ Public Class CNCommunication
                Case CN_generico.CnData.nAxes     ' (55)
                   m_CN.n_index_is_G24_active = nIndex
                   m_CN.b5AxesState = b_temp
+               Case CN_generico.CnData.ResetStatus     ' (56)
+                  m_CN.bResetState = b_temp
 
             End Select
          Next
@@ -1455,6 +1492,11 @@ Public Class CNCommunication
    Friend Function SendProgram(ByVal sCncPath As String, ByVal nNumProg As Integer,
                                Optional bActivate As Boolean = True) As Boolean
       Dim bOk As Boolean = True
+
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+      ' m_nNCType = 2
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+
       ' Download programma
       If m_MainWindow.m_bNCLink Then
          bOk = (m_nNCType > 0)
@@ -1488,7 +1530,7 @@ Public Class CNCommunication
             ' Attesa opportuna
             System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
-         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         EgtOutLog("Download_NC_prog(" & sCncPath & ", " & sNumProg.ToString & ")")
          ' -------------- START DOWNLOAD -------------- 
          TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
@@ -1667,6 +1709,7 @@ Public Class RefereceFlagSimens
    Private m_TypeArray As Integer
    ' Opzionale
    Private m_IndexBit As Integer = -1
+   Private m_DefaultValue As String = ""
 
    Public Property SiemnesArrayIndex As Integer
       Get
@@ -1704,6 +1747,15 @@ Public Class RefereceFlagSimens
       End Set
    End Property
 
+   Public Property DefaultValue As String
+      Get
+         Return m_DefaultValue
+      End Get
+      Set(value As String)
+         m_DefaultValue = value
+      End Set
+   End Property
+
    Sub New(IndArray As Integer, Flag As Integer, nType As Integer)
       m_SiemnesArrayIndex = IndArray
       m_FlagIndex = Flag

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 57                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -72,6 +72,8 @@ Public MustInherit Class CN_generico
       EnablePC = 54
 
       nAxes = 55
+
+      ResetStatus = 56
    End Enum
 
    Public Enum Type As Short

NcComm/M_Num_old.vb

@@ -1297,14 +1297,14 @@ Namespace Num
       End Function
 
       Function VerifyBusy() As eStateType
-         For I As Integer = 0 To 50
+         For I As Integer = 0 To 150
             If global_state <> eStateType.READY Then
                System.Threading.Thread.Sleep(SLEEP_TIME)
             Else
                Exit For
             End If
          Next
-
+         EgtOutLog("eStateType: " & global_state.ToString & "  -- if eStateType=0 it means READY")
          Return global_state
 
       End Function

OmagCUT.vbproj

@@ -1376,6 +1376,13 @@
     <Resource Include="Resources\NewIcons\Move-Spot-Reg.png" />
   </ItemGroup>
   <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %282%29.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %283%29.png" />
     <Resource Include="Resources\NewIcons\RawHeight.png" />
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />

Project/CurrentProjectPageUC.xaml.vb

@@ -10,6 +10,7 @@ Public Class CurrentProjectPageUC
    Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    ' Dichiarazione delle Page UserControl
@@ -353,6 +354,10 @@ Public Class CurrentProjectPageUC
       SetInfoMessage(DistToString(vtDist))
    End Sub
 
+   Private Sub OnMyKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles CurrentProjectScene.KeyDown
+      RaiseEvent OnKeyCancelDownScene(sender, e)
+   End Sub
+
    ' Gestione progetto
 
    Friend Sub SetNextProjectIndex()
@@ -518,7 +523,7 @@ Public Class CurrentProjectPageUC
       ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
-      EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
+      If nRefAddTabId = GDB_ID.NULL Then EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
       EgtSetInfo(nAddTabId, KEY_ADD_TABLE, dAddTable)
       Return True
    End Function

Project/ProjectMgrUC.xaml.vb

@@ -333,6 +333,10 @@ Public Class ProjectMgrUC
             EgtTdbGetCurrToolParam(MCH_TP.DIAM, dHeight)
             ' Raggio lama
             dHeight = dHeight / 2
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Raggio
+            dThick = 0
+            dHeight = 0
          Else
             ' Diametro FRESA/FORETTO (l'altezza non serve: posizione calcolata tiene conto del Tip Tool)
             EgtTdbGetCurrToolParam(MCH_TP.DIAM, dThick)
@@ -371,7 +375,7 @@ Public Class ProjectMgrUC
          If Not EgtGetTableRef(1, m_ptTabOri) Then Return
          ' recupero il punto medio della curva
          EgtMidPoint(nIdSelected, GDB_ID.ROOT, ptMid)
-         ptMid.z = m_ptTabOri.z + CamAuto.GetRawHeight() + dHeight
+         ptMid.z = m_ptTabOri.z + CamAuto.GetRawHeight() + dHeight + m_MainWindow.m_CurrentMachine.dAdditionalTable
          ' Offset dovuto allo spessore Utensile
          ptMid -= vtOffset * dThick
 
@@ -399,6 +403,10 @@ Public Class ProjectMgrUC
             EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
             ' Forzo B90
             dB1 = 90
+            ' Forzo la pozione in Z alla quota di Home (per evitare l'errore di fine corsa asse Z)
+            Dim dHomeZ As Double = 0
+            EgtGetAxisHomePos("Z", dHomeZ)
+            ptMid.z = dHomeZ
          Else
             ' Se utensile speciale
             If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
@@ -424,6 +432,7 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
+            EgtOutLog("Out of stroke: " & nStat)
             vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
             If CurrTestTool.ToolIsSaw Then
@@ -455,6 +464,12 @@ Public Class ProjectMgrUC
             End If
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
+
+            ' verifica assi lineari
+            EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
+            If nStat <> 0 Then
+               EgtOutLog("2nd attemp out of stroke: " & nStat)
+            End If
          End If
 
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
@@ -744,6 +759,12 @@ Public Class ProjectMgrUC
                Exit For
             End If
          Next
+
+         ' leggo il nome della tavola da cui sto lanciando il progetto 
+         Dim sTabeName As String = String.Empty
+         EgtGetTableName(sTabeName)
+         Dim bDoubleProg As Boolean = (GetPrivateProfileInt(S_PRODUCTIONLINE, "DoubleProg", 0, m_MainWindow.GetMachIniFile()) <> 0)
+
          ' Leggo eventuale variabile per lavorazione con 2 tavole in parallelo (standard E80027)
          Dim nVarProgTwins As Integer = 1
          If Not String.IsNullOrWhiteSpace(m_CurrMachine.sVarProgTwins) Then
@@ -757,8 +778,26 @@ Public Class ProjectMgrUC
                End If
             Next
          End If
+
          ' Verifico se posso scrivere nell'area 1
-         If nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2) Then
+         Dim bSendToAre1 As Boolean = (nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2))
+         Dim bSendToAre2 As Boolean = (nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2))
+
+         If bDoubleProg Then
+            If sTabeName = MAIN_TAB Then
+               ' spedisco il programma da tavola 1 solo se CN ha terminato programma 901
+               bSendToAre1 = (nVarProg1 = 0)
+               bSendToAre2 = False
+               EgtOutLog(" Invio programma da tavola 1")
+            Else
+               ' spedisco il programma da tavola 2 solo se CN ha terminato programma 902
+               bSendToAre1 = False
+               bSendToAre2 = (nVarProg2 = 0)
+               EgtOutLog(" Invio programma da tavola 2")
+            End If
+         End If
+
+         If bSendToAre1 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg1, False) Then
                ' Dichiaro part program inviato
@@ -775,7 +814,7 @@ Public Class ProjectMgrUC
             End If
             m_CurrNcComm.SetProgramMainOrSub(True)
             ' Altrimenti verifico se posso scrivere nell'area 2
-         ElseIf nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2) Then
+         ElseIf bSendToAre2 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg2, False) Then
                ' Dichiaro part program inviato
@@ -795,6 +834,12 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+         ' avvio programma solo se DoubleProg
+         If (GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 And bDoubleProg) And
+            (bSendToAre1 Or bSendToAre2) Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
 
       End If
 #End If
@@ -967,7 +1012,8 @@ Public Class ProjectMgrUC
       'EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
 
       EgtTdbSetCurrTool(SelTestTool.ToolName)
-      EgtLuaSetGlobStringVar("CMD.TLNAME", SelTestTool.ToolAlias)
+      EgtLuaSetGlobStringVar("CMD.TLNAME", SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLALIAS", SelTestTool.ToolAlias)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)

RawPhoto/Camera.vb

@@ -347,6 +347,13 @@ Public Class Camera
 
       ' ------------------------------------ accensione riflettori ------------------------------------
 
+      ' ------------------------------------ mando la testa in home ------------------------------------
+      If Not GoHomeForPhoto() Then
+         EgtOutLog("Error in positioning")
+      End If
+
+      ' ------------------------------------ mando la testa in home ------------------------------------
+
       ' Scatto una foto con eventuale riconoscimento del contorno (il programma deve essere già attivo)
       Dim bOk As Boolean = False
       Dim sArgs As String = "2 0"
@@ -364,6 +371,64 @@ Public Class Camera
       Return bOk
    End Function
 
+   Private Function GoHomeForPhoto() As Boolean
+      Dim bGoHome As Boolean = GetPrivateProfileInt(S_PHOTO, K_ENABELE_GOHOME_FOR_PHOTO, 0, m_MainWindow.GetMachIniFile()) <> 0
+      ' Se non configurato esco senza generare errore
+      If Not bGoHome Then Return True
+      ' Costruisco il bottone per potere eseguire il comando MDI
+      Dim GoHome As MachineButton = Nothing
+      Dim sDirectCmdFile As String = String.Empty
+      GetPrivateProfileString(S_PHOTO, K_CAMERA_DIRECT_CMD, "", sDirectCmdFile, m_MainWindow.GetMachIniFile())
+      If String.IsNullOrEmpty(sDirectCmdFile) Then
+         Return False
+      Else
+         EgtOutLog("Direct command for positionig head: " & sDirectCmdFile)
+      End If
+      GoHome = New TwoStateButton("", sDirectCmdFile, "", "", "")
+      ' eseguo lo script lua associato
+      GoHome.ExecuteMDICommand(GoHome.TLuaScriptName)
+      ' Leggo nome variabile posizione home raggiunta
+      Dim CameraStateNameVar As String = String.Empty
+      GetPrivateProfileString(S_PHOTO, K_CAMERA_STATE_VAR, "", CameraStateNameVar, m_MainWindow.GetMachIniFile())
+      If String.IsNullOrEmpty(CameraStateNameVar) Then
+         'Return False
+      Else
+         EgtOutLog("Variable for read status of positioning head: " & CameraStateNameVar)
+      End If
+      ' 91144=Going home
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(91144))
+      UpdateUI()
+      ' Eseguo reset variabile posizione home raggiunta
+      m_MainWindow.m_CNCommunication.m_CN.DVariables_WriteVariables2(CameraStateNameVar, "0")
+      System.Threading.Thread.Sleep(300)
+      ' Definisco flag posizionamento completato
+      Dim bPositionOk As Boolean = False
+      For I As Integer = 0 To 40
+         ' Devo rileggere la variabile ad ogni ciclo
+         m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(CameraStateNameVar, 3)
+         System.Threading.Thread.Sleep(100)
+         If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
+            Dim CameraStateVal As Integer = CInt(m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value)
+            Select Case CameraStateVal
+               Case 0
+                  ' Non faccio alcunchè perchè si sta posizionando
+               Case 1
+                  ' Posizionamento completato
+                  bPositionOk = True
+                  Exit For
+               Case 2
+                  ' Errore
+                  bPositionOk = False
+                  Exit For
+            End Select
+         End If
+         System.Threading.Thread.Sleep(900)
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      UpdateUI()
+      Return bPositionOk
+   End Function
+
    Private Function WaitPhoto(nInd As Integer) As Boolean
       ' Ciclo di ricerca foto scattata
       Dim nMaxThick = 10 * m_nTimeout

VeinMatching/VeinMatchingWindow.xaml

@@ -4,27 +4,77 @@
    TextBlock.FontFamily="{DynamicResource OmagCut_Font}"
    Height="500" Width="500" ShowInTaskbar="False" Initialized="Window_Initialized" MinWidth="300" MinHeight="300">
 
-   <Grid Name="VeinMatchingGrid" Background="{DynamicResource OmagCut_Gray}">
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="91"/>
-         <ColumnDefinition Width="1*"/>
-      </Grid.ColumnDefinitions>
-
-        <StackPanel Orientation="Vertical">
-            <Button Name="NewBtn" Height="64"
-            Style="{DynamicResource OmagCut_YellowTextButton}"
-            Content="New"/>
-            <Button Name="ExportBtn" Height="64"
-            Style="{DynamicResource OmagCut_YellowTextButton}"
-            Content="Export"/>
-            <Button Name="AssemblyBtn" Height="64"
-            Style="{DynamicResource OmagCut_YellowTextButton}"
-            Content="3D"/>
-            <Button Name="ImportCurrProjBtn" Height="64"
-            Style="{DynamicResource OmagCut_YellowTextButton}"
-            Content="Import"/>
-        </StackPanel>
-
+    <Grid Name="VeinMatchingGrid" Background="{DynamicResource OmagCut_Gray}">
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="91"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <DockPanel>
+            <StackPanel Orientation="Vertical" VerticalAlignment="Top" DockPanel.Dock="Top">
+                <Button Name="NewBtn" Height="64"
+                        Style="{DynamicResource OmagCut_YellowTextButton}"
+                        Content="New"/>
+                <Button Name="ExportBtn" Height="64"
+                        Style="{DynamicResource OmagCut_YellowTextButton}"
+                        Content="Export"/>
+                <Button Name="AssemblyBtn" Height="64"
+                        Style="{DynamicResource OmagCut_YellowTextButton}"
+                        Content="3D"/>
+                <Button Name="ImportCurrProjBtn" Height="64"
+                        Style="{DynamicResource OmagCut_YellowTextButton}"
+                        Content="Import"/>
+                <ToggleButton Name="MeasureBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                    <Image Source="{DynamicResource MeasureImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </StackPanel>
+            
+            <StackPanel Name="DistanceStkPnl" Orientation="Vertical" VerticalAlignment="Bottom" DockPanel.Dock="Bottom" Margin="10,0,0,0">
+                <!--Distanza-->
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="MeasureLabTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="0" Foreground="{StaticResource Omag_LightGray}" 
+                               Text="Dist=" HorizontalAlignment="Right" />
+                    <TextBlock Name="MeasureValTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="1" Foreground="{StaticResource Omag_LightGray}"
+                               HorizontalAlignment="Left"/>
+                </Grid>
+                <!--Proiezione in X-->
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="dXLabTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="0" Foreground="{StaticResource Omag_LightGray}" 
+                               Text="dX=" HorizontalAlignment="Right"/>
+                    <TextBlock Name="dXValTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="1" Foreground="{StaticResource Omag_LightGray}"
+                               HorizontalAlignment="Left"/>
+                </Grid>
+                <!--Proiezione in Y -->
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="dYLabTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="0" Foreground="{StaticResource Omag_LightGray}" 
+                               Text="dY=" HorizontalAlignment="Right"/>
+                    <TextBlock Name="dYValTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="1" Foreground="{StaticResource Omag_LightGray}"
+                               HorizontalAlignment="Left"/>
+                </Grid>
+                <!--Proiezione in Z -->
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="dZLabTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="0" Foreground="{StaticResource Omag_LightGray}" 
+                               Text="dZ=" HorizontalAlignment="Right"/>
+                    <TextBlock Name="dZValTxBl" Height="20" DockPanel.Dock="Bottom" Grid.Column="1" Foreground="{StaticResource Omag_LightGray}"
+                               HorizontalAlignment="Left"/>
+                </Grid>
+            </StackPanel>
+        </DockPanel>
     </Grid>
 
 </Window>

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -82,6 +82,8 @@ Public Class VeinMatchingWindow
          Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())
          EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
          m_bFirst = False
+         ' nascondo la visulizzazione dei campi
+         DistanceStkPnl.Visibility = Visibility.Hidden
       End If
       ' inibisco selezione diretta da Scene
       VeinMatchingScene.SetStatusNull()
@@ -194,6 +196,25 @@ Public Class VeinMatchingWindow
       EgtDraw()
    End Sub
 
+   Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles VeinMatchingScene.OnShowDistanceVector
+      Dim sMsg As String = DistToString(vtDist)
+      Dim sItemsMsg As String() = sMsg.Split(vbCrLf)
+      If sItemsMsg.Count > 1 Then
+         ' stampo solo il valore di lunghezza
+         MeasureValTxBl.Text = sItemsMsg(0).Split("="c)(1)
+         sItemsMsg(1) = sItemsMsg(1).Trim
+         Dim sSubItemMsg As String() = sItemsMsg(1).Split(" "c)
+         If sSubItemMsg.Count > 1 Then
+            dXValTxBl.Text = sSubItemMsg(0).Split("="c)(1)
+            dYValTxBl.Text = sSubItemMsg(1).Split("="c)(1)
+            dZValTxBl.Text = sSubItemMsg(2).Split("="c)(1)
+         End If
+      Else
+         MeasureValTxBl.Text = sMsg
+      End If
+      DistanceStkPnl.Visibility = Visibility.Visible
+   End Sub
+
    Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
       VeinMatching.Clear()
    End Sub
@@ -211,6 +232,25 @@ Public Class VeinMatchingWindow
       VeinMatching.LoadCurrPartFromProj()
    End Sub
 
+   Private Sub MeasureBtn_Checked(sender As Object, e As RoutedEventArgs) Handles MeasureBtn.Checked
+      VeinMatchingScene.SetStatusGetDistance()
+      Dim ptRef1 As Point3d
+      If EgtGetTableRef(1, ptRef1) Then
+         EgtSetGridFrame(New Frame3d(ptRef1))
+         VeinMatchingScene.SetGridCursorPos(True)
+      End If
+   End Sub
+
+   Private Sub MeasureBtn_Unchecked(sender As Object, e As RoutedEventArgs) Handles MeasureBtn.Unchecked
+      VeinMatchingScene.ResetStatusGetDistance()
+      VeinMatchingScene.SetStatusNull()
+      MeasureValTxBl.Text = ""
+      dXValTxBl.Text = ""
+      dYValTxBl.Text = ""
+      dZValTxBl.Text = ""
+      DistanceStkPnl.Visibility = Visibility.Hidden
+   End Sub
+
 End Class
 
 Friend Module VeinMatching