-aggiunto nuovo tab final cut in machining

-aggiunto tooltip

AboutBox/AboutBoxWD.xaml

@@ -23,7 +23,8 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.25*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.25*"/>
          </Grid.RowDefinitions>
@@ -35,7 +36,7 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Border Name="LogoBrd" Grid.Column="1">
-               <Image Source="../Resources/AboutBoxImage.png" Stretch="Uniform"/>
+                    <Image Source="../Resources/NewIcons/Logo-Egalware (3).png" Stretch="Uniform"/>
             </Border>
          </Grid>
          <TextBlock Name="DescriptionLbl" Grid.Column="1" Grid.Row="3" HorizontalAlignment="Center"
@@ -44,13 +45,17 @@
             VerticalAlignment="Center" FontSize="18"/>
          <TextBlock Name="KeyLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
+
+            <TextBlock Name="AssStatusLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
+
+            <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+            VerticalAlignment="Center" FontSize="18"/>
+         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="9" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="15" />
-         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="10" IsCancel="True"
+         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="11" IsCancel="True"
             Style="{DynamicResource OmagCut_WindowGrayTextButton}" Margin="1,0"/>
 
       </Grid>

AboutBox/AboutBoxWD.xaml.vb

@@ -33,6 +33,19 @@ Public Class AboutBoxWD
 #Else
       KeyLbl.Text = sKey & " - " & sOpts
 #End If
+      ' COPIATO da codice CAM5
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         ElseIf nAssLeftDays > 0 Then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+      AssStatusLbl.Text = sAssStatus
       CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
       MachineLbl.Text = "Machine : " & m_MainWindow.m_CurrentMachine.sMachineName
       ProjectLbl.Text = "Project : " & m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()

CAM/CamAuto.vb

@@ -1,5 +1,6 @@
 Imports System.Windows.Forms.Integration
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Friend Module CamAuto
 
@@ -22,11 +23,51 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Add")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91017))
+      End If
+      m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
+      Return bOk
+   End Function
+
+   Friend Function AddSawMachining(nOperId As Integer, ByRef nNewOperation As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateSawing")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaGetGlobIntVar("CAM.NEW_OPERATION", nNewOperation)
+      EgtLuaResetGlobVar("CAM")
       If nErr <> 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+      Return bOk
+   End Function
+
+   Friend Function ChangePvColor(nOperId As Integer, colCut As Color3d)
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaExecLine("CAM.ChangePvColor( " & nOperId.ToString & ",Color3d(" & colCut.R.ToString & "," & colCut.G.ToString & "," & colCut.B.ToString & "))")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       End If
-      m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       Return bOk
    End Function
 
@@ -40,9 +81,34 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJet")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
+   ' versione CamAuto 2.6l1: gestione tagli con ridotto affondamento
+   Friend Function AddWaterJetMachining(LocaList As List(Of Integer), ByRef nWarn As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      For i As Integer = 0 To LocaList.Count - 1
+         EgtLuaSetGlobIntVar("CAM.TAB_OPERID." & (i + 1).ToString, LocaList(i))
+      Next
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJets")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -56,9 +122,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Erase")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       m_MainWindow.m_CurrentProjectPageUC.ResetProjectNcRestart()
@@ -74,9 +142,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.InvertVerticalCut")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -102,6 +172,63 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function RestoreDef_Machinig(Optional bOnlySideAng As Boolean = True)
+      Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+      Dim bApplySawingTilted As Boolean = m_MainWindow.m_CurrentMachine.bApplySawingTilted
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop dei pezzi nel grezzo
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop dei pezzi in parcheggio
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' ripristina la lavorazone indicata di default per i tagli inclinati
+   Private Sub SetResetDef_Machining(nEntId As Integer, sSawingTilted As String, bApplySawingTilted As Boolean, bOnlySideAng As Boolean)
+      While nEntId <> GDB_ID.NULL
+         Dim sInfoOrigSideAng As String = String.Empty
+         EgtGetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, sInfoOrigSideAng)
+         ' Se è un'entità associata ad una lavorazione inclinata
+         If Not String.IsNullOrEmpty(sInfoOrigSideAng) AndAlso sInfoOrigSideAng <> "0" Then
+            If bApplySawingTilted Then
+               ' forzo la lavorazione inclinata
+               If String.IsNullOrEmpty(sSawingTilted) Then
+                  ' ma se non esiste nessuna lavorezione specifica applico qualla standard
+                  EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
+               Else
+                  ' Applico quella specificata
+                  EgtSetInfo(nEntId, DEF_MACHINING_TILTED, sSawingTilted)
+               End If
+            Else
+               ' Rimuovo la lavorazione e applico quella standard
+               EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
+            End If
+
+         ElseIf Not bOnlySideAng Then
+            Dim sInfo As String = String.Empty
+            EgtGetInfo(nEntId, DEF_MACHINING, sInfo)
+            If Not String.IsNullOrEmpty(sInfo) Then
+               ' se esiste una lavorazione specificata allora la rimuovo
+               EgtRemoveInfo(nEntId, DEF_MACHINING)
+            End If
+         End If
+         nEntId = EgtGetNext(nEntId)
+      End While
+   End Sub
+
    Friend Function ResetAllSplitCurv() As Boolean
       Dim bOk As Boolean = True
       Dim nIdPart As Integer = EgtGetFirstPart()
@@ -164,6 +291,45 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllSplitCut() As Boolean
+      Dim PartList As New List(Of Integer)
+      ' Ricerca nei grezzi dei pezzi (devono essere ricercati tra quelli presenti nei grezzi)
+      Dim bOk As Boolean = True
+      ' Recupero il numero di fasi presenti nel progetto
+      Dim nPhaseCount As Integer = EgtGetPhaseCount()
+      For nPhase As Integer = 1 To nPhaseCount
+         EgtSetCurrPhase(nPhase)
+         Dim nRawId As Integer = EgtGetFirstRawPart()
+         While nRawId <> GDB_ID.NULL
+            Dim nParId As Integer = EgtGetFirstPartInRawPart(nRawId)
+            If EgtVerifyRawPartPhase(nRawId, nPhase) Then
+               While nParId <> GDB_ID.NULL
+                  Dim nNextParId As Integer = EgtGetNextPartInRawPart(nParId)
+                  ' verifico se il pezzo passato è un taglio di sepatazione (il nome deve contenere "SpliCut")
+                  Dim sName As String = String.Empty
+                  If EgtGetName(nParId, sName) AndAlso sName.Contains(SPLIT_CUT) Then
+                     ' Rimuovo il pezzo dal grezzo
+                     If EgtRemovePartFromRawPart(nParId) Then
+                        ' Salvo l'indice del pezzo se non è stato già inserito
+                        Dim nIndex As Integer = PartList.FirstOrDefault(Function(nId) nId = nParId)
+                        If nIndex = 0 Then PartList.Add(nParId)
+                     End If
+                  End If
+                  nParId = nNextParId
+               End While
+            End If
+            nRawId = EgtGetNextRawPart(nRawId)
+         End While
+      Next
+      ' Reimposto la prima fase del progetto
+      EgtSetCurrPhase(1)
+      ' Procedo ad eliminare il pezzo
+      For Each Item As Integer In PartList
+         bOk = bOk And EgtErase(Item)
+      Next
+      Return bOk
+   End Function
+
    Friend Function ResetAllRawPart() As Boolean
       Dim nPhase As Integer = 1
       Dim nOtherRaw As Integer = EgtGetFirstRawPart()
@@ -232,9 +398,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateAllTp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -248,9 +416,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Sort")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -265,9 +435,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.SpecApplyDisp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       If ResetOrderMachiningFlag Then
          m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
@@ -283,7 +455,7 @@ Friend Module CamAuto
             EgtGetGroupObjs(EgtGetFirstNameInGroup(nPartId, NAME_UNDERDRILL)) = 0 Then
             Return True
          End If
-      ' Se tutti i pezzi
+         ' Se tutti i pezzi
       Else
          ' Salvo fase attualmente corrente
          Dim nOriPhase As Integer = EgtGetCurrPhase()
@@ -410,6 +582,7 @@ Friend Module CamAuto
       Return EgtRemoveOperationHome(nId)
    End Function
 
+   ' Verifico che per tutte le lavorazioni sia attrezzato l'utensile
    Friend Function VerifySetup(ByRef sMissingTools As String) As Boolean
       Dim bOk As Boolean = True
       Dim bIsMultiCut = (EgtGetHeadId("H101") <> GDB_ID.NULL)
@@ -424,9 +597,9 @@ Friend Module CamAuto
             Dim sTool2 As String = String.Empty
             EgtGetMachiningParam(MCH_MP.TUUID, sTuuid)
             EgtTdbGetToolFromUUID(sTuuid, sTool)
-            If String.IsNullOrWhiteSpace( sTool) Then
+            If String.IsNullOrWhiteSpace(sTool) Then
                Dim sMchTool As String = ""
-               EgtGetMachiningParam( MCH_MP.TOOL, sMchTool)
+               EgtGetMachiningParam(MCH_MP.TOOL, sMchTool)
                bOk = False
                If sMissingTools.IndexOf(sMchTool) = -1 Then
                   sMissingTools = sMissingTools & sMchTool & ", "
@@ -439,8 +612,24 @@ Friend Module CamAuto
                   End If
                   sTool2 = sTool & "-2"
                End If
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 AndAlso
-                  ( String.IsNullOrWhiteSpace( sTool2) OrElse String.Compare(sTool2, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0) AndAlso
+               If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+                  Dim bOnHolder As Boolean = False
+                  For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                     If ToolPosition.sTool <> String.Empty Then
+                        If sTool = ToolPosition.sTool Then
+                           bOnHolder = True
+                           Exit For
+                        End If
+                     End If
+                  Next
+                  If Not bOnHolder Then
+                     bOk = False
+                     If sMissingTools.IndexOf(sTool) = -1 Then
+                        sMissingTools = sMissingTools & sTool & ", "
+                     End If
+                  End If
+               ElseIf String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 AndAlso
+                  (String.IsNullOrWhiteSpace(sTool2) OrElse String.Compare(sTool2, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0) AndAlso
                   String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrDripSaw) <> 0 Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
@@ -478,6 +667,8 @@ Friend Module CamAuto
          End If
          nId = EgtGetNextOperation(nId)
       End While
+      Dim index As Integer = sMissingTools.LastIndexOf(","c)
+      sMissingTools = If(index >= 0, sMissingTools.Remove(index, 1), sMissingTools)
       Return bOk
    End Function
 
@@ -504,9 +695,10 @@ Friend Module CamAuto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
       ' Ciclo sulle lavorazioni
       Dim nOperId As Integer = EgtGetFirstOperation()
+      Dim LocalListOperId As New List(Of Integer)
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida di taglio con lama
-         If IsValidMachining( nOperId) And EgtGetOperationType( nOperId) = MCH_OY.SAWING Then
+         If IsValidMachining(nOperId) And EgtGetOperationType(nOperId) = MCH_OY.SAWING Then
             ' verifica interferenza
             Dim nFlag As Integer = FMI_TYPE.NONE
             If Not VerifyComposedMachining(nOperId, nFlag) Then
@@ -518,12 +710,14 @@ Friend Module CamAuto
                ' se abilitato e attivo waterjet, lo aggiungo per completare il taglio
                If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
                   Dim nWarn As Integer = 0
-                  AddWaterJetMachining(nOperId, nWarn)
+                  LocalListOperId.Add(nOperId)
+                  'AddWaterJetMachining(nOperId, nWarn)
                End If
             End If
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
+      If LocalListOperId.Count > 0 Then AddWaterJetMachining(LocalListOperId, 0)
       Return bModified
    End Function
 
@@ -627,8 +821,8 @@ Friend Module CamAuto
          If nOriLeadIn <> MCH_SAW_LI.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_SAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_SAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_SAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_SAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -647,8 +841,8 @@ Friend Module CamAuto
          If nOriLeadOut <> MCH_SAW_LO.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_EAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_EAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_EAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_EAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -805,9 +999,9 @@ Friend Module CamAuto
    Friend Function RemoveAllExitPreCuts() As Boolean
       Dim nOperId As Integer = EgtGetFirstOperation()
       While nOperId <> GDB_ID.NULL
-         Dim nNextOperId As Integer = EgtGetNextOperation( nOperId)
-         If EgtGetType( nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
-            EgtRemoveOperation( nOperId)
+         Dim nNextOperId As Integer = EgtGetNextOperation(nOperId)
+         If EgtGetType(nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
+            EgtRemoveOperation(nOperId)
          End If
          nOperId = nNextOperId
       End While
@@ -817,6 +1011,7 @@ Friend Module CamAuto
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
       Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sSawTiltedMch As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
@@ -835,6 +1030,7 @@ Friend Module CamAuto
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
+      EgtLuaSetGlobStringVar("CAM.SAWTILTEDMCH", sSawTiltedMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
@@ -860,20 +1056,24 @@ Friend Module CamAuto
       If EgtGetTableId(MAIN_TAB) = GDB_ID.NULL Then Return 0
       If EgtGetTableId(SECOND_TAB) = GDB_ID.NULL Then Return 1
       If EgtGetTableId(THIRD_TAB) = GDB_ID.NULL Then Return 2
-      Return 3
+      If EgtGetTableId(FORTH_TAB) = GDB_ID.NULL Then Return 3
+      Return 4
    End Function
 
    Friend Function GetTableName(nInd As Integer) As String
       If nInd = 1 Then Return MAIN_TAB
       If nInd = 2 Then Return SECOND_TAB
       If nInd = 3 Then Return THIRD_TAB
+      If nInd = 4 Then Return FORTH_TAB
       Return ""
    End Function
 
    Friend Function GetCurrentTable() As Integer
       Dim sTabName As String = MAIN_TAB
       EgtGetTableName(sTabName)
-      If sTabName = THIRD_TAB Then
+      If sTabName = FORTH_TAB Then
+         Return 4
+      ElseIf sTabName = THIRD_TAB Then
          Return 3
       ElseIf sTabName = SECOND_TAB Then
          Return 2
@@ -994,13 +1194,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di sgrossatura con lama
       Dim sCurrSawRoughing = m_MainWindow.m_CurrentMachine.sCurrSawRoughing
       If String.IsNullOrEmpty(sCurrSawRoughing) Then Return True
@@ -1027,8 +1227,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1043,13 +1243,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
-      EgtGetInfo( nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di finitura con lama
       Dim sCurrSawFinishing = m_MainWindow.m_CurrentMachine.sCurrSawFinishing
       If String.IsNullOrEmpty(sCurrSawFinishing) Then Return True
@@ -1086,8 +1286,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1102,13 +1302,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di spatolatura con lama
       Dim sCurrSawSideFinishing = m_MainWindow.m_CurrentMachine.sCurrSawSideFinishing
       If String.IsNullOrEmpty(sCurrSawSideFinishing) Then Return True
@@ -1129,8 +1329,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1269,14 +1469,14 @@ Friend Module CamAuto
             dStartDist = dEndDist
             dEndDist = dTemp
          End If
-      ' altrimenti
+         ' altrimenti
       Else
          Dim vtSide As Vector3d
          ' Se faccia non limitata da altre o sopra la limitante
          If bFree Then
             EgtSetMachiningParam(MCH_MP.FACEUSE, MCH_MIL_FU.ORTUP_DOWN)
             vtSide = Vector3d.Z_AX()
-         ' altrimenti è stata trovata una faccia adiacente limitante
+            ' altrimenti è stata trovata una faccia adiacente limitante
          Else
             If vtAdjN.x > 10 * EPS_SMALL Then
                EgtSetMachiningParam(MCH_MP.FACEUSE, MCH_MIL_FU.ORTUP_LEFT)

CadCuts/CSVPage.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <!--Griglia per oscurare i bottoni della pagina sottostante-->
-            <Grid Background="{DynamicResource OmagCut_Gray}">
+         <Grid Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
@@ -49,7 +49,7 @@
 
          <Label Name="CsvPathTxBl" Grid.Row="1" Background="White" FontSize="16" VerticalAlignment="Center" Padding="2,5,0,5"/>
 
-            <TreeView Name="PartsTreeView" Grid.Row="2" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+         <TreeView Name="PartsTreeView" Grid.Row="2" Background="{StaticResource OmagCut_TreeViewGradientGray}">
             <TreeView.Resources>
                <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
@@ -62,7 +62,7 @@
                      </Grid.ColumnDefinitions>
 
                      <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0,8,6,4" />
-                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" />
+                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" Foreground="Black" />
 
                   </Grid>
 
@@ -123,7 +123,10 @@
                         </Setter>
                         <Style.Triggers>
                            <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                              <Setter Property="Foreground" Value="{StaticResource OmagCut_LightGray}"/>
+                              <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                              <Setter Property="Foreground" Value="Black"/>
                            </DataTrigger>
                         </Style.Triggers>
                      </Style>
@@ -131,18 +134,25 @@
                </HierarchicalDataTemplate>
                <!--Modifico DataTemplate del ToolItem per poter inserire immagine e testo-->
                <DataTemplate DataType="{x:Type self:PartCustomItem}">
-                  <Grid Width="246" Margin="0,5,0,5" HorizontalAlignment="Right">
+                  <Grid Width="234.8" Margin="0,5,0,5" HorizontalAlignment="Right">
                      <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="1*"/>
                         <ColumnDefinition Width="60"/>
                         <ColumnDefinition Width="1*"/>
                      </Grid.ColumnDefinitions>
 
-                     <TextBlock Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
-                     <TextBlock Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
-                     <TextBlock Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
+                     <TextBlock x:Name="TbName"  Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
+                     <TextBlock x:Name="TbText1" Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
+                     <TextBlock x:Name="TbText2" Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
 
                   </Grid>
+                  <DataTemplate.Triggers>
+                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                        <Setter TargetName="TbName" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText1" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText2" Property="TextDecorations" Value="Strikethrough" />
+                     </DataTrigger>
+                  </DataTemplate.Triggers>
                </DataTemplate>
             </TreeView.Resources>
 

CadCuts/CadCutPageUC.xaml.vb

@@ -2,6 +2,7 @@
 Imports EgtWPFLib
 Imports System.Reflection
 Imports System.Globalization
+Imports EgtWPFLib5
 
 Public Class CadCutPageUC
 

CadCuts/ChangeToolWD.xaml

@@ -0,0 +1,92 @@
+<Window x:Class="ChangeToolWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+         <!--TextAlignment="Center"
+              FontSize="20"
+              VerticalAlignment="Center"-->
+
+         <Grid Grid.Column="1" Grid.Row="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.8*"/>
+               <ColumnDefinition Width="0.7*"/>
+               <ColumnDefinition Width="0.7*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Grid.Column="0" Text="MACHINING" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="1" Text="TOOL" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="2" Text="TC" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Margin="10,0,0,0"/>
+         </Grid>
+
+         <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+                  ItemsSource="{Binding ItemList}">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="{Binding ActualWidth, ElementName=SetUpToolListBox}" Margin="0,0,-40,0">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.8*"/>
+                        <ColumnDefinition Width="0.7*"/>
+                        <ColumnDefinition Width="0.4*"/>
+                        <ColumnDefinition Width="0.0*"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Grid.Column="0" Text="{Binding Machining}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                            <TextBlock Grid.Column="1" Text="{Binding ToolName}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                     <TextBlock Grid.Column="2" Text="{Binding ToolPos}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                     <Rectangle Grid.Column="2" Style="{DynamicResource Rect_SplitPage}" Margin="15,0,0,0"/>
+                     <Grid.ToolTip>
+                        <StackPanel>
+                           <TextBlock Text="{Binding Machining}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                           <TextBlock Text="{Binding ToolName}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                           <TextBlock Text="{Binding ToolPos}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                        </StackPanel>
+                     </Grid.ToolTip>
+                  </Grid>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
+         </ListBox>
+
+         <TextBlock Name="ErrorTxBl" Grid.Column="1" Grid.Row="3" 
+                    Style="{DynamicResource OmagCut_ErrorTextBlock}"/>
+
+         <Grid Grid.Column="1" Grid.Row="5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</Window>

CadCuts/ChangeToolWD.xaml.vb

@@ -0,0 +1,381 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+
+Public Class ChangeToolWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpMachiningList As New ObservableCollection(Of ItemMachining)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   ' Parametri della lama impostata correntemente in macchina
+   Private m_DefaultSaw_Name As String = String.Empty
+   Private m_DefaultSaw_Diam As Double = 0
+   Private m_DefaultSaw_Thick As Double = 0
+   Private m_DefaultSaw_Exists As Boolean = False
+
+   ' Il nome della lavorazione restituito dalla selezione
+   Private m_NewSawing As String = String.Empty
+   Public ReadOnly Property NewSawing As String
+      Get
+         Return m_NewSawing
+      End Get
+   End Property
+
+   ' Il colore della lavorazione
+   Private m_EgtColor As New Color3d
+   Public ReadOnly Property EgtColor As Color3d
+      Get
+         Return m_EgtColor
+      End Get
+   End Property
+
+   ' Il nome della posizione sulla rulliera
+   Private m_TCPos As String = String.Empty
+   Public ReadOnly Property TCPos As String
+      Get
+         Return m_TCPos
+      End Get
+   End Property
+
+   ' Nome della lavorazione corrente
+   Private m_CurrSawing As String = String.Empty
+   Public Property CurrSawing As String
+      Get
+         Return m_CurrSawing
+      End Get
+      Set(value As String)
+         m_CurrSawing = value
+      End Set
+   End Property
+
+   Private Sub GetDiamAndThickDefaultSaw()
+      m_DefaultSaw_Name = m_MainWindow.m_CurrentMachine.sCurrSaw
+      ' Dalla lavorazione corrente recupero il nome della lama
+      If EgtMdbSetCurrMachining(m_CurrSawing) Then
+         Dim sNameTool As String = String.Empty
+         If EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool) Then m_DefaultSaw_Name = sNameTool
+      End If
+      If EgtTdbSetCurrTool(m_DefaultSaw_Name) Then
+         ' Diametro lama lavorazione
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_DefaultSaw_Diam)
+         ' Spessore lama corrente
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, m_DefaultSaw_Thick)
+         m_DefaultSaw_Exists = True
+      End If
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpMachiningList
+      ' 90378=Seleziona lavorazione
+      FilePathTxBl.Text = EgtMsg(90378)
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      If String.IsNullOrEmpty(m_CurrSawing) Then
+         m_CurrSawing = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpMachining()
+      ' ricerco la lavorazione corrente
+      Dim Item As ItemMachining = m_SetUpMachiningList.FirstOrDefault(Function(x) x.Machining = m_CurrSawing)
+      Dim Index As Integer = m_SetUpMachiningList.IndexOf(Item)
+      If Index < 0 Then
+         ' Imposto lavorazione di default  
+         EgtMdbSetCurrMachining(m_CurrSawing)
+         Dim sTool As String = String.Empty
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sTool)
+         ' ⚠️ Utensile {0} non attrezzato
+         ErrorTxBl.Text = String.Format(EgtMsg(90377), sTool)
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpMachiningList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpMachiningList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+#Region "SET UP MACHINING"
+
+   ' Creo le liste da mostrare nella lista
+   Private Function LoadSetUpMachining() As Boolean
+      Dim sNameTool As String = String.Empty
+      Dim nType As Integer = 0
+      Dim sHeadTool As String = String.Empty
+      Dim nExitTool As Integer = 0
+      ' Imposto il contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Recupero la lista di tutte le lavorazioni di lama
+      Dim local_Sawing As TreeViewItem.CathegoryItem = GetAllSwaing()
+      ' Se non ci sono lavorazioni di lama allora esco
+      If IsNothing(local_Sawing) Then Return False
+
+      ' Ripulisco la lista degli utensili
+      m_SetUpMachiningList.Clear()
+      CreateSawingList(local_Sawing)
+
+      Return True
+   End Function
+
+   ' Creo la lista delle delle lavorazioni di lama da proporre
+   Private Sub CreateSawingList(SawingFam As TreeViewItem.CathegoryItem)
+      ' Recupero le info della lama montata di default
+      GetDiamAndThickDefaultSaw()
+      ' recupero la prima lavorazione
+      For Each Item As TreeViewItem.CustomItem In SawingFam.Items
+         Dim sNameTool As String = String.Empty
+         ' Imposto la lavorazione corrente
+         EgtMdbSetCurrMachining(Item.Name)
+         ' Recupero il nome dell'utensile della lavorazione
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool)
+         If Not String.IsNullOrEmpty(sNameTool) And VerifyCurrSawTollerance(sNameTool) Then
+            ' Verifico che sia montata su un portautensile
+            EgtTdbSetCurrTool(sNameTool)
+            Dim sTCPos As String = String.Empty
+            EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+            If Not String.IsNullOrEmpty(sTCPos) Then
+               ' Cerco nel porta utensili automaitico 
+               For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                  If ToolPosition.sTool <> String.Empty Then
+                     If sNameTool = ToolPosition.sTool Then
+                        ' Verifico che il materiale e lo spessore
+                        If VerifyCurrMachiningMaterial() Then
+                           m_SetUpMachiningList.Add(New ItemMachining(Item.Name, sNameTool, sTCPos, Utility.GetColorPV()))
+                        End If
+                        Exit For
+                     End If
+                  End If
+               Next
+            End If
+         End If
+      Next
+      ' reimposto la lavorazione di lama e la lama impostate in macchina
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+      EgtMdbSetCurrMachining(m_MainWindow.m_CurrentMachine.sCurrSawing)
+   End Sub
+
+   ' verifico l'utensile corrente (impostato nella funzione chiamante) se può lavorare il grezzo corrente
+   Private Function VerifyCurrMachiningMaterial() As Boolean
+      Dim m_MaterialsList As New ObservableCollection(Of MachiningMaterial)
+      For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
+         Else
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         End If
+      Next
+
+      Dim ToolString As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, ToolString)
+      If ToolString <> String.Empty Then
+         Dim sItems() = ToolString.Split(";".ToCharArray)
+         Dim Index As Integer = 0
+         For Each Material As MachiningMaterial In m_MaterialsList
+            Dim Param() As String = sItems(Index).Split(",".ToCharArray)
+            Dim SubParam() As String = Param(0).Split(".".ToCharArray)
+            Dim nParId As Integer = 0
+            Dim nSubParId As Integer = 0
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+               If StringToInt(SubParam(0), nParId) AndAlso nParId = m_MainWindow.m_CurrentMachine.CurrMat.nId AndAlso SubParam.Count > 1 AndAlso
+                  StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+               Else
+                  Material.VerifyIfActive()
+               End If
+            Else
+               If StringToInt(Param(0), nParId) AndAlso nParId = m_MainWindow.m_CurrentMachine.CurrMat.nId Then
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  If m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight > Material.dMinThickness And m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight < Material.dMaxThickness Then
+                     Return True
+                  End If
+               End If
+            End If
+            Index += 1
+         Next
+      End If
+      Return False
+   End Function
+
+   ' verifico l'utensile corrente (impostato nella funzione chiamante) se ha le stesse dimensioni della lama di default
+   Private Function VerifyCurrSawTollerance(sNameTool As String) As Boolean
+      If m_DefaultSaw_Exists Then
+         If EgtTdbSetCurrTool(sNameTool) Then
+            ' Diametro nuova lama
+            Dim NewDiam As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, NewDiam)
+            ' Spessore lama
+            Dim NewThick As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, NewThick)
+            ' Verifico che la nuova lama possa essere applicata: diametro minore, uguale spessore
+            Dim Delta_Diam As Double = NewDiam - m_DefaultSaw_Diam
+            Dim Delta_Thick As Double = Math.Abs(NewThick - m_DefaultSaw_Thick)
+            If Delta_Diam < EPS_SMALL And Delta_Thick < EPS_SMALL Then
+               Return True
+            Else
+               EgtOutLog(String.Format("New saw {0} can not repalce the current {1}; Delta_Diam={2}, |Delta_Thick|={3} ", sNameTool, m_DefaultSaw_Name, Delta_Diam, Delta_Thick))
+            End If
+         Else
+            EgtOutLog("Impossible to find in tooldb SAW: " & sNameTool)
+         End If
+      Else
+         If String.IsNullOrEmpty(m_DefaultSaw_Name) Then
+            EgtOutLog("There is no currsaw setted in machine!")
+         Else
+            EgtOutLog("Impossible to find in tooldb currsaw setted in machine: " & m_DefaultSaw_Name)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' Restituisce tutto l'elenco delle lavorazioni disponibili in macchina
+   Private Function GetAllSwaing() As TreeViewItem.CathegoryItem
+      Dim sFName As String = EgtMsg(MSG_MACHININGSDBPAGEUC + 31)
+      Dim nFType As Integer = MCH_MY.SAWING
+      If Not m_MainWindow.m_CurrentMachine.bSawing Then Return Nothing
+      ' Inserisco categoria ed eventuali elementi
+      Dim MachiningCathegory As New TreeViewItem.CathegoryItem(sFName, nFType)
+      Dim MachiningName As String = String.Empty
+      If EgtMdbGetFirstMachining(nFType, MachiningName) Then
+         MachiningCathegory.Items.Add(New TreeViewItem.CustomItem(MachiningName, nFType))
+         While EgtMdbGetNextMachining(nFType, MachiningName)
+            MachiningCathegory.Items.Add(New TreeViewItem.CustomItem(MachiningName, nFType))
+         End While
+      End If
+      Return MachiningCathegory
+   End Function
+
+#End Region    ' Set up machinining
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      m_NewSawing = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).Machining
+      m_EgtColor = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).PrintFootToolColor
+      m_TCPos = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         m_NewSawing = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).Machining
+         m_EgtColor = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).PrintFootToolColor
+         m_TCPos = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+End Class
+
+Public Class ItemMachining
+
+   Private m_ToolPos As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_Machining As String = String.Empty
+   Private m_ToolExit As Integer = 1
+   Private m_ToolType As Integer = -1
+   Private m_PrintFootToolColor As New Color3d(0, 255, 0, 100)
+   Private m_cSawColor As SolidColorBrush
+
+   ' Posizione porta utensile
+   Public Property ToolPos As String
+      Get
+         Return m_ToolPos
+      End Get
+      Set(value As String)
+         m_ToolPos = value
+      End Set
+   End Property
+
+   ' Nome utensile
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   ' Nome della lavorazione
+   Public Property Machining As String
+      Get
+         Return m_Machining
+      End Get
+      Set(value As String)
+         m_Machining = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property PrintFootToolColor As Color3d
+      Get
+         Return m_PrintFootToolColor
+      End Get
+      Set(value As Color3d)
+         m_PrintFootToolColor = value
+      End Set
+   End Property
+
+   Public Property SawColor As SolidColorBrush
+      Get
+         Return m_cSawColor
+      End Get
+      Set(value As SolidColorBrush)
+         m_cSawColor = value
+      End Set
+   End Property
+
+   Sub New(sMachining As String, sToolName As String, sToolPos As String, cColor As Color3d)
+      m_Machining = sMachining
+      m_ToolPos = sToolPos
+      m_ToolName = sToolName
+      m_PrintFootToolColor = cColor
+      m_cSawColor = New SolidColorBrush(Color.FromRgb(m_PrintFootToolColor.R, m_PrintFootToolColor.G, m_PrintFootToolColor.B))
+   End Sub
+
+End Class

CadCuts/ChooseTestToolWD.xaml

@@ -0,0 +1,61 @@
+<Window x:Class="ChooseTestToolWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="OpenFile" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <!--TextAlignment="Center"
+                  FontSize="20"
+                  VerticalAlignment="Center"-->
+            <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+               ItemsSource="{Binding ItemList}">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding ToolAlias}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

CadCuts/ChooseTestToolWD.xaml.vb

@@ -0,0 +1,311 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+
+Public Class ChooseTestToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpToolList As New ObservableCollection(Of TestTool)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpToolList
+      FilePathTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 45)              ' Selezionare l'utensile da tastare
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpTool()
+      ' ricerco l'utensile della lavorazione indicata
+      Dim Item As TestTool = m_SetUpToolList.FirstOrDefault(Function(x) x.ToolName = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv)
+      Dim Index As Integer = m_SetUpToolList.IndexOf(Item)
+      If Index < 0 Then
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpToolList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpToolList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+   Private Function LoadSetUpTool() As Boolean
+      Dim sNameTool As String = String.Empty
+      Dim sHeadTool As String = String.Empty
+      Dim nExitTool As Integer = 0
+
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la lama
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, True))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la fresa
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto il foretto
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+
+      sNameTool = "Laser point"
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto laser di puntamento
+         m_SetUpToolList.Add(New TestTool(sNameTool, ""))
+      End If
+
+      sNameTool = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto WJ
+         m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+      End If
+
+      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+         Case CurrentMachine.MountedToolConfigs.SAW
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la fresa
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto il foretto
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+
+         Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               sNameTool = ToolChangerPos.sTool
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Imposto la lama
+                  m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+               End If
+            Next
+            Return True
+
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+
+         Case Else
+            Return False
+      End Select
+
+
+      Return True
+   End Function
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   ' restituisce l'oggetto selezionato in elenco e lo imposta come attivo
+   Friend Function GetSelectedTool() As TestTool
+      Dim SelTestTool As TestTool = DirectCast(SetUpToolListBox.SelectedItem, TestTool)
+      If SelTestTool.ToolAlias = "Laser point" Then
+         SelTestTool.ToolHead = "H3"
+         SelTestTool.ToolExit = 1
+         SelTestTool.ToolIsSaw = False
+         SelTestTool.ToolIsLaser = True
+      Else
+         EgtTdbSetCurrTool(SelTestTool.ToolName)
+         Dim sHeadTool As String = String.Empty
+         Dim nExitTool As Integer = 0
+         Dim sTypeTool As String = String.Empty
+         Dim nTypeTool As Integer
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, nTypeTool)
+         EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHeadTool)
+         EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExitTool)
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, sTypeTool)
+         SelTestTool.ToolHead = sHeadTool
+         SelTestTool.ToolExit = nExitTool
+         SelTestTool.ToolType = nTypeTool
+         SelTestTool.ToolIsSaw = (nTypeTool = MCH_TY.SAW_STD)
+         SelTestTool.ToolIsLaser = False
+      End If
+
+      Return SelTestTool
+   End Function
+
+End Class
+
+Public Class TestTool
+
+   Private m_ToolAlias As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_ToolHead As String = "H1"
+   Private m_ToolExit As Integer = 1
+   Private m_ToolIsSaw As Boolean = False
+   Private m_ToolIsLaser As Boolean = False
+   Private m_ToolType As Integer = -1
+
+   Public Property ToolAlias As String
+      Get
+         Return m_ToolAlias
+      End Get
+      Set(value As String)
+         m_ToolAlias = value
+      End Set
+   End Property
+
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   Public Property ToolHead As String
+      Get
+         Return m_ToolHead
+      End Get
+      Set(value As String)
+         m_ToolHead = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property ToolIsSaw As Boolean
+      Get
+         Return m_ToolIsSaw
+      End Get
+      Set(value As Boolean)
+         m_ToolIsSaw = value
+      End Set
+   End Property
+
+   Public Property ToolIsLaser As Boolean
+      Get
+         Return m_ToolIsLaser
+      End Get
+      Set(value As Boolean)
+         m_ToolIsLaser = value
+      End Set
+   End Property
+
+   Sub New(sToolAlias As String, sToolName As String)
+      m_ToolAlias = sToolAlias
+      m_ToolName = sToolName
+   End Sub
+
+End Class

CadCuts/MoveRawPartPage.xaml.vb

@@ -44,8 +44,8 @@ Public Class MoveRawPartPage
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
-      ScrapsBtn.Content = "Add Scraps"
-      UnloadPartsBtn.Content = "Move part"
+      ScrapsBtn.Content = EgtMsg(90366)                      'Add Scraps
+      UnloadPartsBtn.Content = EgtMsg(90367)                 'Move part
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -124,19 +124,26 @@ Public Class MoveRawPartPage
       If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
          ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
          SetAuxTabInCurrDisposition()
-         UnloadPartsBtn.Content = "Go to MOVE part"
+         UnloadPartsBtn.Content = EgtMsg(90368)    ' Go to MOVE part
          ' altrimenti, aggiorno visualizzazione
       ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
-         EgtDraw()
-         UnloadPartsBtn.Content = "Go to UNLOAD part"
+         UnloadPartsBtn.Content = EgtMsg(90369)    ' Go to UNLOAD part
       End If
       '---------------------------- AUX TABLE ---------------------------- 
-
+      EgtDraw()
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
+      ' Carico il valore ci 
+      Dim ExtraStep As Double = GetPrivateProfileDouble(S_RAWMOVE, K_EXTRASTEP, 1, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
       m_dStep = SplitAuto.MaxCuttingMustache(m_dStep)
-      StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+1"
+      If ExtraStep < EPS_SMALL Then
+         StepMoveTxBx.Text = LenToString(m_dStep, 1)
+      Else
+         StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+" & LenToString(ExtraStep, 1)
+         ' Aggiorno il valore sommando l'extra
+         m_dStep = m_dStep + ExtraStep
+      End If
       m_dRotation = GetPrivateProfileDouble(S_RAWMOVE, K_RAWROTATION, 30, m_MainWindow.GetIniFile())
       RotationAngleTxBx.Text = DoubleToString(m_dRotation, 3)
       ' Se movimento manuale perpendicolare
@@ -208,10 +215,10 @@ Public Class MoveRawPartPage
       Else
          UnloadPartsBtn.Visibility = Visibility.Visible
          If m_SplitPage.m_bOnAuxTab Then
-            UnloadPartsBtn.Content = "Go to MOVE part"
+            UnloadPartsBtn.Content = EgtMsg(90368)    ' Go to MOVE part
             ' altrimenti, aggiorno visualizzazione
          Else
-            UnloadPartsBtn.Content = "Go to UNLOAD part"
+            UnloadPartsBtn.Content = EgtMsg(90369)    ' Go to UNLOAD part
          End If
       End If
       ' Aggiorno interfaccia per taglio perpendicolare
@@ -335,18 +342,26 @@ Public Class MoveRawPartPage
                If VerifyCollisionWithOtherRawPart(nId) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(nId, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))      ' Collisione pezzi
                Else
                   ' Se con ventose, le nascondo
                   If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
-
                ' verifico che il pezzo precedente possa essere depositato correttamente
                If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))      ' Collisione pezzi
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' Verifico che il pezzo corrente sia prelevabile - versione 2.6c3 -
+               If VerifyCollisionWithOtherRawPart(nId, True) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(91231))       ' Collisione pezzi
                   EgtDraw()
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
@@ -374,7 +389,7 @@ Public Class MoveRawPartPage
                   VacuumCups.ResetHeadName()
                   Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(nId, rmData)
                   If Not bPutVacuum Then
-                     Dim bTwoHeadVac As Boolean = ( EgtGetHeadId( VACUUM_HEAD_2) <> GDB_ID.NULL)
+                     Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
                      If bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(nId, rmData)
                   End If
 
@@ -421,7 +436,7 @@ Public Class MoveRawPartPage
    End Sub
 
    ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
-   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+   Private Function VerifyCollisionWithOtherRawPart_0(nIdOnVacumm As Integer) As Boolean
       ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
       If m_SplitPage.m_bOnAuxTab Then Return False
       If nIdOnVacumm = GDB_ID.NULL Then Return False
@@ -455,23 +470,86 @@ Public Class MoveRawPartPage
       Return False
    End Function
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi - versione 2.6c3 -
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer, Optional IsTaking As Boolean = False) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      ' recupero il contorno del'ID attaccato alle ventose e da questo genero una superificie
+      Dim nIdUpRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawUpReg")
+      Dim nIdDwnRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawDwnReg")
+      ' recupero gli ID di tutti i grezzi della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo e genero la sua sueperificie
+            Dim nIdUpRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawUpReg")
+            Dim nIdDwnRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawDwnReg")
+            ' creo la copia delle superifici
+            Dim nCopy_IdDwnRegionOnVac As Integer = EgtCopyGlob(nIdDwnRegionOnVac, m_nTempId)
+            Dim nCopy_nIdUpRegion As Integer = EgtCopyGlob(nIdUpRegion, m_nTempId)
+            ' PRELIEVO
+            If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdUpRegion) Then
+               ' se esite una superficie allora esiste un'intersezione
+               If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                  EgtErase(m_nTempId)
+                  ' Esco: Intersezione TROVATA → true
+                  Return True
+               End If
+            End If
+            If Not IsTaking Then
+               ' DEPOSITO : devono essere esguiti due controlli ulteririori
+               Dim nCopy_IdUpRegionOnVac As Integer = EgtCopyGlob(nIdUpRegionOnVac, m_nTempId)
+               Dim nCopy_nIdDwnRegion As Integer = EgtCopyGlob(nIdDwnRegion, m_nTempId)
+               If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdDwnRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+               If EgtSurfFrIntersect(nCopy_IdUpRegionOnVac, nCopy_nIdUpRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdUpRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
    Private Function VerifyIsNewScrap(nMyId As Integer) As Boolean
       Dim nVal As Integer = 0
       If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
          If nVal = 1 Or nVal = 2 Then
             ' 1 → è stato definito come nuovo grezzo oppure, 2 → è stato definito come nuovo grezzo ed è stato inserito nel DB delle lastre
-            ScrapsBtn.Content = "Remove Scrap"
+            ScrapsBtn.Content = EgtMsg(91228)      ' Remove Scrap
             ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
             Return True
          ElseIf nVal = 3 Then
             ' non è possibile rimuovere il grezzo in questa fase
-            ScrapsBtn.Content = "Defined as Scrap"
+            ScrapsBtn.Content = EgtMsg(91229)      ' Defined as Scrap
             ScrapsBtn.IsEnabled = False
             Return True
          End If
       End If
       ' non è un nuovo grezzo
-      ScrapsBtn.Content = "Add Scrap"
+      ScrapsBtn.Content = EgtMsg(91230)            ' Add Scrap
       ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
       Return False
    End Function
@@ -789,6 +867,12 @@ Public Class MoveRawPartPage
       Return bOk
    End Function
 
+   Private Sub RemovePart_KeyCancel(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles m_CurrProjPage.OnKeyCancelDownScene
+      If e.KeyCode = System.Windows.Forms.Keys.Delete Then
+         RemovePartBtn_Click(Nothing, Nothing)
+      End If
+   End Sub
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -856,6 +940,7 @@ Public Class MoveRawPartPage
       ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
       RefreshVisibility()
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
@@ -1291,7 +1376,7 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_SplitPage.m_bShow Then
          ' verifico se la fase successiva è uno scarico frontale
          If NextOperationIsUnloading(m_nCurrDisposition) Then
@@ -1435,7 +1520,12 @@ Public Class MoveRawPartPage
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
       UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
       If m_SplitPage.m_bShow Then
-         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         ' se ultima fase (e non sacrico su tavola)
+         If m_nCurrPhase = EgtGetPhaseCount() And m_SplitPage.m_bOnAuxTab Then
+            NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         Else
+            NextBtn.IsEnabled = (m_nCurrPhase <= EgtGetPhaseCount())
+         End If
       Else
          ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
          If Not bExistsMachining Then
@@ -1443,7 +1533,6 @@ Public Class MoveRawPartPage
          Else
             NextBtn.IsEnabled = True
          End If
-
       End If
    End Sub
 

CadCuts/NestPageUC.xaml

@@ -12,7 +12,7 @@
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
+        </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="8*"/>
@@ -100,7 +100,32 @@
                VerticalAlignment="Center" />
          </Button>
 
-            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
+          <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG0_Reg" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" Visibility="Hidden">
+                <ToggleButton Name="AddPointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ModPointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Move-Spot-RegImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="RemovePointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG1_Reg" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" Visibility="Hidden">
+                <Button Name="AdjustPointRegBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Muovi-grezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="ActivatePointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ON_OFF-REGImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3">
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
@@ -124,29 +149,31 @@
                 </ToggleButton>
             </UniformGrid>
 
-            <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+            <UniformGrid Name ="UG2" Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
-         </UniformGrid>
+                <ToggleButton Name="ParkIndBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Name="ParkIndImg" Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
 
       </Grid>
 
       <!--LowerButtonGrid-->
-      <Grid Grid.Column="2" Grid.Row="2">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
+        <Grid Grid.Column="2" Grid.Row="2">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-      </Grid>
-
-   </Grid>
+        </Grid>
+    </Grid>
    
 </UserControl>

CadCuts/SelParkIndWD.xaml

@@ -0,0 +1,97 @@
+<UserControl x:Class="SelParkIndWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.1*"/>
+                <ColumnDefinition Width="10*"/>
+                <ColumnDefinition Width="0.1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.0*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.0*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" 
+                       Visibility="Collapsed"/>
+            <!--TextAlignment="Center"
+               FontSize="20"
+               VerticalAlignment="Center"-->
+            <ListBox Name="ParkIndListBox" Grid.Column="1" Grid.Row="2"
+                     ItemsSource="{Binding ItemList}" ScrollViewer.CanContentScroll="False" ScrollViewer.HorizontalScrollBarVisibility="Hidden">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <StackPanel Orientation="Vertical" >
+                            <UniformGrid Columns="2"  Visibility="{Binding TitleVisibility}">
+                                <StackPanel Orientation="Horizontal">
+                                    <Image Source="{Binding ImgTab}" Height="20" Stretch="Uniform"/>
+                                    <TextBlock Text="{Binding CountInTab}" Height="20" Width="30">
+                                        <TextBlock.Style>
+                                            <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                                <Style.Triggers>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                                        <Setter Property="FontStyle" Value="Oblique"/>
+                                                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                                    </DataTrigger>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                                        <Setter Property="Foreground" Value="black"/>
+                                                    </DataTrigger>
+                                                </Style.Triggers>
+                                            </Style>
+                                        </TextBlock.Style>
+                                    </TextBlock>
+                                </StackPanel>
+                                <StackPanel Orientation="Horizontal">
+                                    <Image Source="{Binding ImgPark}" Height="20" Stretch="Uniform"/>
+                                    <TextBlock Text="{Binding CountInPark}" Height="20" Width="30">
+                                        <TextBlock.Style>
+                                            <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                                <Style.Triggers>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                                        <Setter Property="FontStyle" Value="Oblique"/>
+                                                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                                    </DataTrigger>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                                        <Setter Property="Foreground" Value="black"/>
+                                                    </DataTrigger>
+                                                </Style.Triggers>
+                                            </Style>
+                                        </TextBlock.Style>
+                                    </TextBlock>
+                                </StackPanel>
+                            </UniformGrid>
+                            <Image Source="{Binding Img}" Width="120" Stretch="Uniform" Visibility="{Binding MyVisibilityImg}"/>
+                                <Viewbox Name="ViewBoxPark" Visibility="{Binding MyVisibilitySvg}">
+                                <ContentPresenter Content="{Binding LocalMyCanvas.CurrCanvas}"/>
+                            </Viewbox>
+                        </StackPanel>
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
+
+            <Grid Grid.Column="1" Grid.Row="4" Visibility="Collapsed">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</UserControl>

CadCuts/SelParkIndWD.xaml.vb

@@ -0,0 +1,920 @@
+Imports System.ComponentModel
+Imports System.Globalization
+Imports System.Windows.Ink
+Imports System.Xml
+Imports EgtUILib
+Imports OmagCUT.NestPageUC
+
+Public Class SelParkIndWD
+
+   Private Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_nCtx As Integer = -1
+   Public Const nIndAllOff As Integer = 999
+
+   Public Shared sActualProj As String = String.Empty
+
+   Private m_ParkIndList As New List(Of ParkInd)
+   Public Property ParkIndList As List(Of ParkInd)
+      Get
+         Return m_ParkIndList
+      End Get
+      Set(value As List(Of ParkInd))
+         m_ParkIndList = value
+      End Set
+   End Property
+
+   Sub New(Owner As Window, Optional nCtx As Integer = -1)
+      'Me.Owner = Owner
+      InitializeComponent()
+      If nCtx > -1 Then m_nCtx = nCtx
+   End Sub
+
+   Public Sub Me_Laoded() Handles Me.Loaded
+      ' Aggiorno la lista
+      UpdateList()
+      ' Imposto la selezione del primo parcheggio disponibile
+      UpdateDefaultSelection()
+   End Sub
+
+   Public Sub UpdateList()
+      ' Carico lista dei pezzi
+      LoadParkInd(m_ParkIndList, m_nCtx)
+      ParkIndListBox.ItemsSource = m_ParkIndList
+      UpdateDefaultSelection()
+      ' Forzo l'aggiornamento della grafica
+      ParkIndListBox.Items.Refresh()
+   End Sub
+
+   Public Sub UpdateDefaultSelection()
+      ' Procedo a selezionare il primo (E FORSE ANCHE L'UNICO?) parcheggio attivo
+      Dim bFound As Boolean = False
+      For Each ItemPark As ParkInd In m_ParkIndList
+         If ItemPark.IsStatusON Then
+            ParkIndListBox.SelectedItem = ItemPark
+            bFound = True
+            Exit For
+         End If
+      Next
+      If Not bFound And m_ParkIndList.Count > 0 Then
+         m_ParkIndList(0).Status = GDB_ST.ON_
+         ParkIndListBox.SelectedItem = m_ParkIndList(0)
+      End If
+      '' Provedo a spegnere tutti gli altri parcheggi
+      'For Each ItemParkInd As ParkInd In m_ParkIndList
+      '   If ParkIndListBox.SelectedItem.Ind <> ItemParkInd.Ind Then
+      '      ItemParkInd.Status = GDB_ST.OFF
+      '      SetStatusPartInParkInd(ItemParkInd)
+      '   End If
+      'Next
+   End Sub
+
+   Private Sub ParkIndListBox_SelectionChanged() Handles ParkIndListBox.MouseLeftButtonUp
+      ' Non so se il click sta accendeno o spegnendo quinid faccio una verifica dello stato attuale del parcheggio
+      Dim localParkInd As ParkInd = ParkIndListBox.SelectedItem
+      ' Se l'elemento selezionato è attivo allora esco (perchè altrimenti lo spegnerei)
+      If localParkInd.IsStatusON Then Return
+      Dim bFound As Boolean = False
+      If localParkInd.Ind = nIndAllOff Then
+         localParkInd.Status = GDB_ST.ON_
+         bFound = True
+      End If
+      Dim nPartId As Integer = EgtGetFirstPart()
+      ' Cerco il primo pezzo del parcheggio indicato
+      While nPartId <> GDB_ID.NULL And Not bFound
+         Dim sInfoParkInd As String = String.Empty
+         ' Se i pezzi non hanno un indice di parcheggio di default vale "0"
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Determino lo stato da assegnare al parcheggio (prendo il primo pezzo del parcheggio come riferimento)
+            Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+            localParkInd.Status = OppositStat
+            bFound = True
+            ' termino la ricerca
+            Exit While
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Assegno lo stato del parcheggio a tutti i pezzi i parcheggio
+      If bFound Then
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      Else
+         ' Significa che i pezzi sono tutti in macchina: quindi i pezzi sono (SICURAMENTE?) accesi
+         Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+         localParkInd.Status = OppositStat
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      End If
+      ' Se accendo un parcheggio procedo a spegnere tutto gli atri
+      If localParkInd.Status = GDB_ST.ON_ Then
+         For Each ItemParkInd As ParkInd In m_ParkIndList
+            If localParkInd.Ind <> ItemParkInd.Ind Then
+               ItemParkInd.Status = GDB_ST.OFF
+               SetStatusPartInParkInd(ItemParkInd, True, m_nCtx)
+            End If
+         Next
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+#Region "METODI SHARED per gestione della lista parcheggi"
+
+   ' Restituisce il primo indice di parcheggio libero
+   Public Shared Function NewParkInd(Optional nCtx As Integer = -1) As Integer
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim LastParkInd As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Leggo l'indice di parcheggio dei pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio (COPIA della funzione sopra)
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+      Return LastParkInd + 1
+   End Function
+
+   ' Gestisce lo stato dei pezzi associati al parcheggio indicato
+   Public Shared Sub SetStatusPartInParkInd(localParkInd As ParkInd, Optional bDraw As Boolean = True, Optional nCtx As Integer = -1)
+      If IsNothing(localParkInd) Then Return
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Salvo lo stato del parcheggio (per gestire la navigazione) ANCHE SE I PEZZI SONO ACCESI
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Setto lo stato
+            EgtSetStatus(nPartId, localParkInd.Status)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      If bDraw Then EgtDraw()
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Restituuisce la lista dei parcheggi del progetto corrente
+   Public Shared Sub LoadParkInd(P_List As List(Of ParkInd), Optional nCtx As Integer = -1)
+      If IsNothing(P_List) Then Return
+      P_List.Clear()
+      P_List.Add(New ParkInd(nIndAllOff, "All off", 0))
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Aggiorna la lista dei parcheggi, se "bDraw=true" aggiorno la scena
+   Public Shared Sub UpdateViewOnParkInd(Optional bDraw As Boolean = True)
+      ' Ricarico la lista dei parcheggi
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Aggiorna la vista dei parcheggi
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, bDraw)
+      Next
+   End Sub
+
+   ' Restituisce il primo parcheggio attivo (
+   Public Shared Function GetCurrentParkIndSelected() As ParkInd
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Procedo a selezionare il primo (E ANCHE UNICO?..a volte no..) parcheggio attivo -> guarda funzione UpdateList <-
+      For Each ItemPark As ParkInd In ListParkInd
+         If ItemPark.IsStatusON Then
+            Return ItemPark
+         End If
+      Next
+      Return Nothing
+   End Function
+
+   ' Restitusice il nome del file immagine del parcheggio (manance solo dell'Indice di parcheggio e dell'esetensione png)
+   Public Shared Function GetPathCurrProj() As String
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sParkPath As String = m_MainWindow.GetSaveDir() & "\" & Math.Abs(nProj).ToString("D4") & "_ParkInd_"
+      If Not String.IsNullOrEmpty(sActualProj) Then
+         Dim sDir As String = System.IO.Path.GetDirectoryName(sActualProj)
+         Dim sFile As String = System.IO.Path.GetFileNameWithoutExtension(sActualProj)
+         sParkPath = sDir & "\" & sFile & "_ParkInd_"
+      End If
+      Return sParkPath
+   End Function
+
+   Public Shared Sub CopyImgSvg(sNewFileName As String, Optional nCtx As Integer = -1)
+      If sNewFileName.EndsWith(".nge") Then
+         sNewFileName = sNewFileName.Remove(sNewFileName.Length - 4, 4) & "_ParkInd_"
+      End If
+      Dim Extension As String = ".svg"
+      If Not MainWindow.m_bShowSVGParkInd Then Extension = ".png"
+      Dim ListParkInd As New List(Of ParkInd)
+      ' ricarico la lista
+      SelParkIndWD.LoadParkInd(ListParkInd, nCtx)
+      'SelParkIndWD.sActualProj = Path.GetFileNameWithoutExtension(sPath)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind <> 0 And ItemParkInd.Ind <> 999 And ItemParkInd.nPartInPark > 0 Then
+            Try
+               Dim sNewFile As String = sNewFileName & ItemParkInd.Ind.ToString & Extension
+               If MainWindow.m_bShowSVGParkInd Then
+                  WriteMyXML(sNewFile, ItemParkInd.LocalMyCanvas)
+               Else
+                  If System.IO.File.Exists(sNewFile) Then
+                     System.IO.File.Delete(sNewFile)
+                  End If
+                  System.IO.File.Copy(If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img), sNewFile)
+               End If
+            Catch ex As Exception
+               EgtOutLog("Copia immagine " & If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img) & " di ParkInd non roiscita")
+            End Try
+         End If
+      Next
+   End Sub
+
+#End Region    ' Metodi Shared
+
+End Class
+
+Public Class ParkInd
+   Implements INotifyPropertyChanged
+
+   Private m_VisbilityAllOff As Visibility = Visibility.Hidden
+
+   Private m_Ind As Integer
+   Public Property Ind As Integer
+      Get
+         Return m_Ind
+      End Get
+      Set(value As Integer)
+         m_Ind = value
+      End Set
+   End Property
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_Img As String = String.Empty
+   Public Property Img As String
+      Get
+         Return m_Img
+      End Get
+      Set(value As String)
+         m_Img = value
+         NotifyPropertyChanged("MyVisibilityImg")
+      End Set
+   End Property
+
+   Private m_Svg As String = String.Empty
+   Public Property Svg As String
+      Get
+         Return m_Svg
+      End Get
+      Set(value As String)
+         m_Svg = value
+         NotifyPropertyChanged("MyVisibilitySvg")
+      End Set
+   End Property
+
+   Private m_nPartInTable As Integer = 0
+   Public Property nPartInTable As Integer
+      Get
+         Return m_nPartInTable
+      End Get
+      Set(value As Integer)
+         m_nPartInTable = value
+         NotifyPropertyChanged(NameOf(nPartInTable))
+      End Set
+   End Property
+
+   Private m_nPartInPark As Integer = GDB_ST.ON_
+   Public Property nPartInPark As Integer
+      Get
+         Return m_nPartInPark
+      End Get
+      Set(value As Integer)
+         m_nPartInPark = value
+         NotifyPropertyChanged(NameOf(nPartInPark))
+      End Set
+   End Property
+
+   Public ReadOnly Property CountInTab As String
+      Get
+         Return m_nPartInTable.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgTab As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\table.png"
+      End Get
+   End Property
+
+   Public ReadOnly Property CountInPark As String
+      Get
+         Return m_nPartInPark.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgPark As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park.png"
+      End Get
+   End Property
+
+   Private m_Status As Integer
+
+   Public Property Status As Integer
+      Get
+         Return m_Status
+      End Get
+      Set(value As Integer)
+         m_Status = value
+         NotifyPropertyChanged(NameOf(IsStatusON))
+      End Set
+   End Property
+
+   Public ReadOnly Property IsStatusON As Boolean
+      Get
+         Return (m_Status = GDB_ST.ON_)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilityTmg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Img), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilitySvg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Svg), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property TitleVisibility As Visibility
+      Get
+         Return If(m_Ind = 999, m_VisbilityAllOff, Visibility.Visible)
+      End Get
+   End Property
+
+   Private m_LocalMyCanvas As MyCanvas
+   Public ReadOnly Property LocalMyCanvas As MyCanvas
+      Get
+         Return m_LocalMyCanvas
+      End Get
+   End Property
+
+   Sub New(Ind As Integer, Name As String, Stat As Integer)
+      m_Ind = Ind
+      m_Name = Name
+      m_Status = Stat
+      ' Costruisco il percorso immagine 
+      If m_Ind = 0 Then
+         ' Se Ind=0 allora applico il default: C:\EgtData\OmagCUT\Resources\MachineButtonsImage\NewIcons
+         m_Img = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.png"
+         m_Svg = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.svg"
+      ElseIf m_Ind = 999 Then
+         ' Se Ind=0 allora applico il default: C:\EgtData\OmagCUT\Resources\MachineButtonsImage\NewIcons
+         m_Img = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.png"
+         m_Svg = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.svg"
+      Else
+         m_Img = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".png"
+         m_Svg = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".svg"
+      End If
+
+      If MainWindow.m_bShowSVGParkInd Then
+         Dim CanvWidth As Integer = 145
+         Dim CanvHeight As Integer = CInt(CanvWidth / 1.4)
+         m_LocalMyCanvas = New MyCanvas(CanvWidth, CanvHeight)
+         If System.IO.File.Exists(m_Svg) Then
+            ReadMyXML(m_Svg, m_LocalMyCanvas)
+            m_Img = ""
+         End If
+      Else
+         m_Svg = ""
+      End If
+
+      ' Conto il numero di pezzi in Tavola
+      CountPartInTable()
+      ' Conto il numero di pezzi in parcheggio
+      CountPartInPark()
+
+   End Sub
+
+   ' Conta in numero di pezzi di questo parcheggio in Tavola
+   Private Sub CountPartInTable()
+      Dim nCount As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 0.2)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      m_nPartInTable = nCount
+   End Sub
+
+   ' Conta il numero di pezzi di questo parcheggio in Parcheggio
+   Private Sub CountPartInPark()
+      Dim nCount As Integer = 0
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore 
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 1)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      m_nPartInPark = nCount
+   End Sub
+
+   Private Sub UpdateEntInCanvas(nPartId, dOpacity)
+      If Not IsNothing(m_LocalMyCanvas) Then
+         ' modifico il colore del pezzo nel SVG
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nPartId, "Region")
+         If nIdRegion <> GDB_ID.NULL Then
+            Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdRegion)
+            While nIdEnt <> GDB_ID.NULL
+               If EgtGetType(nIdEnt) = GDB_TY.SRF_FRGN Then
+                  Exit While
+               End If
+            End While
+            If nIdEnt <> GDB_ID.NULL Then
+               Dim sName As String = ""
+               EgtGetName(nIdEnt, sName)
+               Dim Idpath As MyPath = m_LocalMyCanvas.ListPath.Find(Function(x) x.id = sName)
+               If Not IsNothing(Idpath) Then
+                  Idpath.fill_opacity = dOpacity
+                  m_LocalMyCanvas.UpdateMyPath(Idpath)
+                  Idpath.LoadPath()
+                  NotifyPropertyChanged(NameOf(LocalMyCanvas))
+               End If
+            End If
+         End If
+      End If
+   End Sub
+
+   ' Verifica se il pezzo passato (da parcheggio o tavola) appartiene al ParkInd corrente e quindi aggiorna il valore di nCount+=1
+   Private Function IncreaseCounterPart(nPartId As Integer, ByRef nCount As Integer) As Boolean
+      Dim bOk As Boolean = False
+      ' Se i pezzi non hanno un indice di parcheggio
+      Dim sInfoParkInd As String = String.Empty
+      Dim nInfoParkInd As Integer = -1
+      ' Recupero l'indice del parcheggio
+      If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+         nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+      Else
+         nInfoParkInd = 0
+      End If
+      ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+      If nInfoParkInd > -1 Then
+         ' e uguale a quallo del parcheggio correntemente selezionato
+         If nInfoParkInd = m_Ind Then
+            nCount = nCount + 1
+            bOk = True
+         End If
+      End If
+
+      Return bOk
+   End Function
+
+   Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged
+
+   Public Sub NotifyPropertyChanged(propName As String)
+      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+   End Sub
+
+End Class
+
+#Region "ELEMENTI PER LA GESTIONE SVG"
+
+Public Class MyCanvas
+
+   Private m_CurrCanvas As New Canvas
+   Public Property CurrCanvas As Canvas
+      Get
+         Return m_CurrCanvas
+      End Get
+      Set(value As Canvas)
+         m_CurrCanvas = value
+      End Set
+   End Property
+
+   Private m_ListPath As New List(Of MyPath)
+   Public Property ListPath As List(Of MyPath)
+      Get
+         Return m_ListPath
+      End Get
+      Set(value As List(Of MyPath))
+         m_ListPath = value
+      End Set
+   End Property
+
+   Private m_ViewBoxDim As String
+   Public Property ViewBoxDim As String
+      Get
+         Return m_ViewBoxDim
+      End Get
+      Set(value As String)
+         m_ViewBoxDim = value
+      End Set
+   End Property
+
+   Sub New(Width As Integer, Height As Integer)
+      m_CurrCanvas.Width = Width
+      m_CurrCanvas.Height = Height
+      m_CurrCanvas.ClipToBounds = True
+   End Sub
+
+   Public Sub LoadCanvas()
+      For Each ItemPath As MyPath In m_ListPath
+         m_CurrCanvas.Children.Add(ItemPath.CurrPath)
+      Next
+   End Sub
+
+   Public Sub UpdateMyPath(CurrPath As MyPath)
+      m_CurrCanvas.Children.Remove(CurrPath.CurrPath)
+      m_CurrCanvas.Children.Add(CurrPath.CurrPath)
+   End Sub
+
+End Class
+
+Public Class MyPath
+
+   Private m_CurrPath As New System.Windows.Shapes.Path
+   Public Property CurrPath As System.Windows.Shapes.Path
+      Get
+         Return m_CurrPath
+      End Get
+      Set(value As System.Windows.Shapes.Path)
+         m_CurrPath = value
+      End Set
+   End Property
+
+   Private m_CanvX As Double
+   Public ReadOnly Property CanvX As Double
+      Get
+         Return m_CanvX
+      End Get
+   End Property
+
+   Private m_CanvY As Double
+   Public ReadOnly Property CanvY As Double
+      Get
+         Return m_CanvY
+      End Get
+   End Property
+
+   Private m_DimX As Double
+   Public ReadOnly Property DimX As Double
+      Get
+         Return m_DimX
+      End Get
+   End Property
+
+   Private m_DimY As Double
+   Public ReadOnly Property DimY As Double
+      Get
+         Return m_DimY
+      End Get
+   End Property
+
+   Private m_id As String
+   Public ReadOnly Property id As String
+      Get
+         Return m_id
+      End Get
+   End Property
+
+   Private m_d As String
+   Public ReadOnly Property d As String
+      Get
+         Return m_d
+      End Get
+   End Property
+
+   Private m_fill As String
+   Public Property fill As String
+      Get
+         Return m_fill
+      End Get
+      Set(value As String)
+         m_fill = value
+      End Set
+   End Property
+
+   Private m_fill_opacity As Double
+   Public Property fill_opacity As Double
+      Get
+         Return m_fill_opacity
+      End Get
+      Set(value As Double)
+         m_fill_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke As String
+   Public Property stroke As String
+      Get
+         Return m_stroke
+      End Get
+      Set(value As String)
+         m_stroke = value
+      End Set
+   End Property
+
+   Private m_stroke_opacity As Double
+   Public Property stroke_opacity As Double
+      Get
+         Return m_stroke_opacity
+      End Get
+      Set(value As Double)
+         m_stroke_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke_width As Double
+   Public Property stroke_width As Double
+      Get
+         Return m_stroke_width
+      End Get
+      Set(value As Double)
+         m_stroke_width = value
+      End Set
+   End Property
+
+   Sub New(Id As String, D As String, CanvX As Double, CanvY As Double, DimX As Double, DimY As Double, Fill As String, FillOpacity As Double, Stroke As String, StrokeOpacity As Double)
+      m_id = Id
+      m_d = D
+      m_CanvX = CanvX
+      m_CanvY = CanvY
+      m_DimX = DimX
+      m_DimY = DimY
+      m_fill = Fill
+      m_fill_opacity = FillOpacity
+      m_stroke = Stroke
+      m_stroke_opacity = StrokeOpacity
+      LoadPath()
+   End Sub
+
+   Public Sub LoadPath()
+      ' Carico la geometria
+      m_CurrPath.Data = Geometry.Parse(d)
+      ' Carico il colore di sfondo
+      SetBrushFromRGBString(m_fill, m_CurrPath.Fill)
+      ' Applico l'opacità della superificie
+      m_CurrPath.Opacity = m_fill_opacity
+      ' Calcolo e applico la traslazione e la scalatura
+      Dim myTransformGroup As New TransformGroup()
+      Dim ScaleX As Double = m_CanvX / DimX
+      Dim ScaleY As Double = m_CanvY / DimY
+      Dim OffX As Double = (m_CanvX - Math.Min(ScaleX, ScaleY) * DimX) / 2
+      Dim OffY As Double = (m_CanvY - Math.Min(ScaleX, ScaleY) * DimY) / 2
+      myTransformGroup.Children.Add(New ScaleTransform(Math.Min(ScaleX, ScaleY), Math.Min(ScaleX, ScaleY)))
+      myTransformGroup.Children.Add(New TranslateTransform(OffX, OffY))
+      m_CurrPath.RenderTransform = myTransformGroup
+   End Sub
+
+   Private Sub SetBrushFromRGBString(sFill As String, ByRef brFill As Brush)
+      If String.IsNullOrEmpty(sFill) Then
+         brFill = Brushes.DarkRed
+         Return
+      End If
+      Dim s1 As String = sFill
+      If s1.Contains("rgb") Then
+         s1 = s1.Replace("rgb(", "")
+         s1 = s1.Replace(")", "")
+         Dim s2 As String = ""
+         For Each s As String In s1.Split(",")
+            s2 &= CInt(s).ToString("x2")
+         Next
+         brFill = New BrushConverter().ConvertFrom("#" & s2)
+      End If
+   End Sub
+
+End Class
+
+Public Module XMLReader
+
+   Public Sub ReadMyXML(FilePath As String, Canv As MyCanvas)
+      'Create the XML Reader
+      Dim m_xmlr As XmlTextReader = New XmlTextReader(FilePath)
+      'Disable whitespace so that you don't have to read over whitespaces
+      m_xmlr.WhitespaceHandling = WhitespaceHandling.None
+      ' Leggo la prima riga: '?xml' tag
+      m_xmlr.Read()
+      ' Passo a leggere la successiva: 'svg' tag
+      m_xmlr.Read()
+      ' Leggo gli attributi di questo tag (dimensioni)
+      Dim ViewBoxDim = m_xmlr.GetAttribute("viewBox")
+      Canv.ViewBoxDim = ViewBoxDim
+      ' Elaboro i dati per avere la scalatura del disegno
+      Dim DimViewBox As String() = ViewBoxDim.ToString.Split(" ")
+      Dim DimX As Integer = Math.Abs(CInt(DimViewBox(2))) + Math.Abs(CInt(DimViewBox(0)))
+      Dim DimY As Integer = Math.Abs(CInt(DimViewBox(3))) + Math.Abs(CInt(DimViewBox(1)))
+
+      ' Leggo in loop i tag: 'path'
+      While Not m_xmlr.EOF
+         m_xmlr.Read()
+         If Not m_xmlr.IsStartElement() Then
+            Continue While
+         End If
+         ' recupero il valore dell'attributo 'id'
+         Dim idAttribute = m_xmlr.GetAttribute("id")
+         ' recupero il valore dell'attributo 'd'
+         Dim dAttribute = m_xmlr.GetAttribute("d")
+         ' recupero il valore dell'attributo 'fill'
+         Dim fillAttribute = m_xmlr.GetAttribute("fill")
+         ' recupero il valore dell'attributo 'fill-opacity'
+         Dim fillOpacityAttribute = m_xmlr.GetAttribute("fill-opacity")
+         ' recupero il valore dell'attributo 'stroke'
+         Dim strokeAttribute = m_xmlr.GetAttribute("stroke")
+         ' recupero il valore dell'attributo 'stroke-opacity'
+         Dim strokeOpacityAttribute = m_xmlr.GetAttribute("stroke-opacity")
+         ' recupero il valore dell'attributo 'stroke - Width'
+         Dim strokeWidthAttribute = m_xmlr.GetAttribute("stroke-width")
+         ' carico l'elemento in lista solo se esiste un'immagine
+         If Not String.IsNullOrEmpty(idAttribute) And Not String.IsNullOrEmpty(dAttribute) Then
+            Dim fillOpacity As Double = 1 ' CDbl(fillOpacityAttribute)
+            StringToDouble(fillOpacityAttribute, fillOpacity)
+            Dim strokeOpacity As Double = 1 ' CDbl(strokeOpacityAttribute)
+            StringToDouble(strokeOpacityAttribute, strokeOpacity)
+            Canv.ListPath.Add(New MyPath(idAttribute, dAttribute, Canv.CurrCanvas.Width, Canv.CurrCanvas.Height, DimX, DimY, fillAttribute, fillOpacity, strokeAttribute, strokeOpacity))
+         End If
+
+      End While
+      ' Libero il file dalla lettura
+      m_xmlr.Close()
+      ' popolo la canvas con le Ptah che ho caricato
+      Canv.LoadCanvas()
+   End Sub
+
+   Public Sub WriteMyXML(FilePath As String, Canv As MyCanvas)
+
+      Dim _namespaceDefault As String = "http://www.w3.org/2000/svg"
+
+      Dim doc As New Xml.XmlDocument
+
+      Dim elm As System.Xml.XmlNode
+      Dim elmSub As System.Xml.XmlNode
+      Dim elmMain As Xml.XmlNode
+
+      doc = New Xml.XmlDocument
+
+      elmMain = doc.CreateElement("svg")
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("viewBox"))
+      elmSub.Value = Canv.ViewBoxDim
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("xmlns"))
+      elmSub.Value = _namespaceDefault
+
+      For Each itemPath As MyPath In Canv.ListPath
+         elm = elmMain.AppendChild(doc.CreateElement("path"))
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("id"))
+         elmSub.Value = itemPath.id
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("d"))
+         elmSub.Value = itemPath.d
+
+         If Not String.IsNullOrEmpty(itemPath.fill) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill"))
+            elmSub.Value = itemPath.fill
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.fill_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill-opacity"))
+            elmSub.Value = itemPath.fill_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke"))
+            elmSub.Value = itemPath.stroke
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-opacity"))
+            elmSub.Value = itemPath.stroke_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_width) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-width"))
+            elmSub.Value = itemPath.stroke_width.ToString(CultureInfo.InvariantCulture)
+         End If
+
+      Next
+
+      doc.AppendChild(doc.CreateXmlDeclaration("1.0", "UTF-8", ""))
+      doc.AppendChild(elmMain)
+      doc.Save(FilePath)
+
+   End Sub
+
+End Module
+
+#End Region    ' Elementi per la gestione SVG

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -33,8 +33,8 @@
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
 
-      TitleWDTxbl.Text = "Selection parts"
-      NbrOfPartsMsg.Text = "Number of parts"
+      TitleWDTxbl.Text = EgtUILib.EgtMsg(91232)      ' Selection parts
+      NbrOfPartsMsg.Text = EgtUILib.EgtMsg(91233)    ' Number of parts
       NbrOfParts.Text = m_NumberOfParts.ToString
    End Sub
 

CadCuts/SelectTableWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="SelectTableWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="282.6" Width="326.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="1.0*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="Title" Grid.Row="1" Grid.Column="1" 
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <ItemsControl Name="TableList"
+                          Grid.Row="2" Grid.Column="1">
+                <ItemsControl.ItemsPanel>
+                    <ItemsPanelTemplate>
+                        <StackPanel Orientation="Horizontal" 
+                                    HorizontalAlignment="Center"/>
+                    </ItemsPanelTemplate>
+                </ItemsControl.ItemsPanel>
+                <ItemsControl.ItemTemplate>
+                    <DataTemplate>
+                        <RadioButton GroupName="TabGrp" 
+                                     IsChecked="{Binding IsActive}"
+                                     Width="60" Height="60">
+                            
+                            <RadioButton.Style>
+                                <Style TargetType="ToggleButton" BasedOn="{StaticResource OmagCut_ToggleButton}">
+                                    <Style.Triggers>
+                                        <Trigger Property="IsChecked" Value="True">
+                                            <Setter Property="Foreground" Value="white"/>
+                                            <Setter Property="Background" Value="{StaticResource OmagCut_Blue}"/>
+                                        </Trigger>
+                                    </Style.Triggers>
+                                </Style>
+                            </RadioButton.Style>
+                            <Grid>
+                                <TextBlock Text="{Binding sName}" Background="Transparent"/>
+                                <Image Source="{Binding ImgTab}" Margin="0,10,0,0"
+                                       Style="{StaticResource OmagCut_ButtonIcon}"/>
+                            </Grid>
+                            
+                        </RadioButton>
+                    </DataTemplate>
+                </ItemsControl.ItemTemplate>
+            </ItemsControl>
+            
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+        </Grid>
+    </Border>
+</Window>

CadCuts/SelectTableWD.xaml.vb

@@ -0,0 +1,96 @@
+Imports System.ComponentModel
+
+Public Class SelectTableWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_nSelectedTable As Integer = 0
+   Public ReadOnly Property nSelectedTable As Integer
+      Get
+         Return m_nSelectedTable
+      End Get
+   End Property
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      Me.WindowStartupLocation = WindowStartupLocation.CenterOwner
+      InitializeComponent()
+   End Sub
+
+   Public CurrTableList As New List(Of TableToChange)
+
+   Private Sub ChangeTable_Initialized() Handles Me.Initialized
+
+      Title.Text = EgtUILib.EgtMsg(91234)      ' Seleziona la tavola da usare
+      ' recuepero l'inidce della tavola corrente
+      Dim nIndeXCurrTab As Integer = GetCurrentTable()
+      ' creo la lista delle tavole disponibili (attivo il bottone della tavola attualmente in uso)
+      For nInd As Integer = 0 To GetTableCount() - 1
+         CurrTableList.Add(New TableToChange("Tab", (nInd + 1).ToString, ((nInd + 1) = nIndeXCurrTab)))
+      Next
+   End Sub
+
+   Private Sub ChangeTable_Loaded() Handles Me.Loaded
+      TableList.ItemsSource = CurrTableList
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      ' recupero l'indice della tavola impostata
+      For Each ItemTab As TableToChange In CurrTableList
+         If ItemTab.IsActive Then
+            m_nSelectedTable = ItemTab.nIndex
+            Exit For
+         End If
+      Next
+      DialogResult = True
+   End Sub
+
+End Class
+
+Public Class TableToChange
+   Implements INotifyPropertyChanged
+
+   Private Property m_sName As String = "Tab"
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgTab As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\table.png"
+      End Get
+   End Property
+
+   Private Property m_nIndex As Integer = 3
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_bIsActive As Boolean = False
+   Public Property IsActive As Boolean
+      Get
+         Return m_bIsActive
+      End Get
+      Set(value As Boolean)
+         m_bIsActive = value
+         NotifyPropertyChanged("IsActive")
+      End Set
+   End Property
+
+   Public Sub New(Name As String, Ind As Integer, IsCurrent As Boolean)
+      m_sName = Name & " " & Ind.ToString
+      m_nIndex = Ind
+      m_bIsActive = IsCurrent
+      NotifyPropertyChanged("IsActive")
+   End Sub
+
+   Public Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs) Implements INotifyPropertyChanged.PropertyChanged
+
+   Public Sub NotifyPropertyChanged(propName As String)
+      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+   End Sub
+
+End Class

CadCuts/SplitAuto.vb

@@ -1,6 +1,4 @@
-Imports System.Net
-Imports System.Windows.Forms.Integration
-Imports EgtUILib
+Imports EgtUILib
 
 Public Module SplitAuto
 
@@ -38,6 +36,10 @@ Public Module SplitAuto
       Public m_dStartFreeLen As Double
       Public m_dEndFreeLen As Double
       Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
+      ' ver 2.7e1: tagli finali 
+      Public m_bFinalCut As Boolean
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -49,128 +51,178 @@ Public Module SplitAuto
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida della fase corrente
          If IsValidMachining(nOperId) And EgtGetOperationPhase(nOperId) = nCurrPhase Then
-            ' se appartiene ad un grezzo attivo la inserisco in lista
-            If IsMachiningInActiveRaw(nOperId) Then
-               Dim Mach As New SplitMach
-               Mach.m_nEntId = GDB_ID.NULL
-               ' identificativo
-               Mach.m_nId = nOperId
-               ' eventuali lavorazioni inglobate
-               Dim sInfo As String = String.Empty
-               If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
-                  Dim sItems() As String = sInfo.Split(",".ToCharArray)
-                  For Each sId As String In sItems
-                     Dim nId As Integer = 0
-                     StringToInt(sId, nId)
-                     If nId > 0 Then Mach.m_vOthId.Add(nId)
-                  Next
-               End If
-               ' tipo
-               Mach.m_nType = EgtGetOperationType(nOperId)
-               ' layer di origine
-               EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
-               ' se taglio con lama
-               If Mach.m_nType = MCH_OY.SAWING Then
-                  ' verifica interferenza
-                  If Mach.m_sLay = NAME_OUTLOOP Then
-                     EgtVerifyMachining(nOperId, Mach.m_nInterf)
-                     For Each nId As Integer In Mach.m_vOthId
-                        Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
-                        EgtVerifyMachining(nId, nRes)
-                        Mach.m_nInterf = Mach.m_nInterf Or nRes
-                     Next
-                  Else
-                     Mach.m_nInterf = FMI_TYPE.NONE
-                  End If
-                  ' la imposto come lavorazione corrente
-                  EgtSetCurrMachining(nOperId)
-                  ' inversione
-                  EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
-                  Dim dStartAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
-                  Dim dEndAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
-                  ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
-                  Mach.m_bIsLine = True
-                  Mach.m_dPrevAng = 0
-                  Mach.m_dNextAng = 0
-                  Mach.m_dStartFreeLen = FREELEN_INF + 1
-                  Mach.m_dEndFreeLen = FREELEN_INF + 1
-                  Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
-                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
-                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
-                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
-                     If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
-                     Mach.m_nEntId = nEntId
-                  End If
-                  ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
-                     Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
-                     Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     If nRes = 0 Then
-                        EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
-                     End If
-                  End If
-                  ' se trasformabile in taglio di separazione, verifico se lo è
-                  If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
-                     EgtSetCurrMachining(nOperId)
-                     Dim nLiType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
-                     Dim nLoType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
-                     Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
-                     Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
-                  Else
-                     Mach.m_bStartAll = False
-                     Mach.m_bEndAll = False
-                  End If
-                  ' Waterjet
-               ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-                  ' Forature e fresature
-               Else
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  Mach.m_dSideAng = 0
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-               End If
-               ' abilitazione
-               Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
-               ' pausa
-               Mach.m_bPause = GetPause(nOperId)
-               ' inserisco in lista
-               MachSplitList.Add(Mach)
-               ' altrimenti la disattivo
-            Else
-               EgtSetOperationMode(nOperId, False)
-            End If
+            Dim Mach As New SplitMach
+            If CreateMach(Mach, nOperId) Then MachSplitList.Add(Mach)
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
       Return True
    End Function
 
+   Friend Function CreateMach(ByRef Mach As SplitMach, nOperId As Integer) As Boolean
+      Dim bOk As Boolean = True
+      ' se appartiene ad un grezzo attivo la inserisco in lista
+      If IsMachiningInActiveRaw(nOperId) Then
+         Mach.m_nEntId = GDB_ID.NULL
+         ' identificativo
+         Mach.m_nId = nOperId
+         ' eventuali lavorazioni inglobate
+         Dim sInfo As String = String.Empty
+         If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
+            Dim sItems() As String = sInfo.Split(",".ToCharArray)
+            For Each sId As String In sItems
+               Dim nId As Integer = 0
+               StringToInt(sId, nId)
+               If nId > 0 Then Mach.m_vOthId.Add(nId)
+            Next
+         End If
+         ' tipo
+         Mach.m_nType = EgtGetOperationType(nOperId)
+         ' layer di origine
+         EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
+         ' se taglio con lama
+         If Mach.m_nType = MCH_OY.SAWING Then
+            ' verifica interferenza
+            If Mach.m_sLay = NAME_OUTLOOP Then
+               EgtVerifyMachining(nOperId, Mach.m_nInterf)
+               For Each nId As Integer In Mach.m_vOthId
+                  Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
+                  EgtVerifyMachining(nId, nRes)
+                  Mach.m_nInterf = Mach.m_nInterf Or nRes
+               Next
+            Else
+               Mach.m_nInterf = FMI_TYPE.NONE
+            End If
+            ' la imposto come lavorazione corrente
+            EgtSetCurrMachining(nOperId)
+            ' inversione
+            EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
+            Dim dStartAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
+            Dim dEndAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
+            ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
+            Mach.m_bIsLine = True
+            Mach.m_dPrevAng = 0
+            Mach.m_dNextAng = 0
+            Mach.m_dStartFreeLen = FREELEN_INF + 1
+            Mach.m_dEndFreeLen = FREELEN_INF + 1
+            Dim nEntId, nSub As Integer
+            If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+               ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+               If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+               Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+               EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+               If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
+               Mach.m_nEntId = nEntId
+               EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
+            End If
+            Mach.m_bFinalCut = False
+            EgtGetInfo(nOperId, "FinalCut", Mach.m_bFinalCut)
+            ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
+            If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And (Mach.m_nInterf And FMI_TYPE.RM) = 0 Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+               Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+
+            ElseIf (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And
+                     (Mach.m_nInterf = FMI_TYPE.LI Or Mach.m_nInterf = FMI_TYPE.LO Or Mach.m_nInterf = FMI_TYPE.RM) Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               ' And (nRes And CAR_RES.LI_OK) <> 0 : da aggiungere
+               Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn And
+                                           Mach.m_nInterf <> FMI_TYPE.LI
+               ' And (nRes And CAR_RES.LO_OK) <> 0 : da aggiungere come sopra
+               Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut And
+                                         Mach.m_nInterf <> FMI_TYPE.LO
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+            End If
+            ' se trasformabile in taglio di separazione, verifico se lo è
+            If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
+               EgtSetCurrMachining(nOperId)
+               Dim nLiType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
+               Dim nLoType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
+               Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
+               Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
+            Else
+               Mach.m_bStartAll = False
+               Mach.m_bEndAll = False
+            End If
+            ' Waterjet
+         ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
+            Mach.m_nInterf = FMI_TYPE.NONE
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+            ' Forature e fresature
+         Else
+            Mach.m_nInterf = FMI_TYPE.NONE
+            Mach.m_dSideAng = 0
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+         End If
+         ' abilitazione
+         Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
+         ' pausa
+         Mach.m_bPause = GetPause(nOperId)
+      Else
+         ' altrimenti la disattivo
+         EgtSetOperationMode(nOperId, False)
+         bOk = False
+      End If
+      Return bOk
+   End Function
+
+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    ' calcolo il numero di tipi di lavorazioni
    Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
@@ -238,8 +290,19 @@ Public Module SplitAuto
             ElseIf Math.Abs(dSideAng) > EPS_ANG_SMALL Then
                colCut = COL_MCH_CUT_ANG()
             Else
-               colCut = COL_MCH_CUT()
+               ' Se macchina con cambio utensile di lama
+               If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+                  Dim sSawing As String = String.Empty, sSaw As String = String.Empty
+                  m_MainWindow.m_CadCutPageUC.m_SplitPage.GetCurrSawingAndSaw(nOperId, sSawing, sSaw)
+                  ' Setto l'utensile corrente
+                  EgtTdbSetCurrTool(sSaw)
+                  ' recupero il colore della lavorazione direttamente dall'utensile
+                  colCut = Utility.GetColorPV()
+               Else
+                  colCut = COL_MCH_CUT()
+               End If
             End If
+
             For Each nId In vCutId
                EgtSetColor(nId, colCut)
             Next
@@ -799,13 +862,13 @@ Public Module SplitAuto
 
    Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                              vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim bTwoHeadVac As Boolean = ( EgtGetHeadId( VACUUM_HEAD_2) <> GDB_ID.NULL)
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
       Dim rmData As New RawMoveData
       Dim vtMove2 As Vector3d = -vtMove
 
       VacuumCups.ResetHeadName()
       Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
-      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum= PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
       If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
          rmData.m_vtRawMove = vtMove
          SaveOneMoveInfoInDisposition(nDispId, rmData)
@@ -826,9 +889,9 @@ Public Module SplitAuto
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
       ' Spostamento originale
-      Dim vtOriMove As New Vector3d( vtMove)
+      Dim vtOriMove As New Vector3d(vtMove)
       ' Livello di movimento
-      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
       Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
       If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
@@ -863,7 +926,7 @@ Public Module SplitAuto
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
             vtMove += 0.5 * vtOriMove
             nMove += 1
-            If nMoveLevel = nMove Then return True
+            If nMoveLevel = nMove Then Return True
          Else
             EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If

CadCuts/SplitPageUC.xaml

@@ -1,10 +1,10 @@
 <UserControl x:Class="SplitPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
 
    <!-- Definizione della SplitPage -->
    <Grid Name="SplitPageGrid" >
@@ -64,24 +64,49 @@
          </Grid.RowDefinitions>
 
          <ListBox Name="MachiningLsBx" Grid.Row="1"
-            SelectionMode="Extended">
+                  SelectionMode="Extended">
             <ListBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding Name}">
-                     <TextBlock.Style>
-                        <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
-                           <Style.Triggers>
-                              <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                                 <Setter Property="TextDecorations" Value="Strikethrough"/>
-                                 <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                              </DataTrigger>
-                              <DataTrigger Binding="{Binding bIsActive}" Value="True">
-                                 <Setter Property="Foreground" Value="Black"/>
-                              </DataTrigger>
-                           </Style.Triggers>
-                        </Style>
-                     </TextBlock.Style>
-                  </TextBlock>
+                  <Grid Width="210">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2.8*"/>
+                        <ColumnDefinition Width="1.2*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Text="{Binding Name}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <TextBlock Grid.Column="1" Text="{Binding TCPos}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <Rectangle Grid.Column="2"
+                                Visibility="{Binding MachiningTCPosVisibility}"
+                                Style="{DynamicResource Rect_SplitPage}"/>
+                  </Grid>
                </DataTemplate>
             </ListBox.ItemTemplate>
          </ListBox>
@@ -100,6 +125,12 @@
             <Button Name="MoveDownBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
+            <ToggleButton Name="LayNbArrTgBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}"
+                          Height="25" Width="25">
+               <Image Name="LayNbArrImg" 
+                      HorizontalAlignment="Center"
+                      VerticalAlignment="Center" Stretch="Uniform"/>
+            </ToggleButton>
 
          </Grid>
 
@@ -132,7 +163,7 @@
             <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            
+
             <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
@@ -146,17 +177,17 @@
                <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </ToggleButton>
 
-             <!--solo per macchine con lavorazioni Waterjet--> 
+            <!--solo per macchine con lavorazioni Waterjet-->
             <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource QualityWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            
+
             <!-- solo per macchine con lavorazioni Waterjet -->
             <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </ToggleButton>
 
-           
+
 
          </Grid>
 

CadCuts/SplitPageUC.xaml.vb

@@ -8,6 +8,9 @@ Public Class SplitPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
 
+   ' Creazione converter da String a ImageSource
+   Private ImageConverter As New ImageSourceConverter
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
@@ -61,6 +64,9 @@ Public Class SplitPageUC
    ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
    Private m_StartEndModifyOnIntCorner As Boolean = False
 
+   Private m_IsCtrlKeyDown As Boolean = False
+   Private m_IsShiftKeyDown As Boolean = False
+
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
       ' Collego lista di oggetti a ListBox
@@ -87,8 +93,8 @@ Public Class SplitPageUC
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       ' Modifica
       AutoBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 18)         ' Auto
       RestartBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 19)      ' Restart
-      BridgesWJBtn.ToolTip = "Bridges"
-      BridgesDeleteWJBtn.ToolTip = "Remove bridges"
+      BridgesWJBtn.ToolTip = EgtMsg(91214)                   ' Bridges
+      BridgesDeleteWJBtn.ToolTip = EgtMsg(91215)             ' Remove bridges
    End Sub
 
    Private Sub SplitPageUC_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -180,6 +186,9 @@ Public Class SplitPageUC
             m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
          End If
       End If
+      ' leggo lo stato del bottone per la visualizzazione delle etichette
+      LayNbArrTgBtn.IsChecked = (GetPrivateProfileInt(S_GENERAL, K_SHOWNBARROW, 1, m_MainWindow.GetIniFile()) <> 0)
+      SetLayNbArrTgBtn_Click()
    End Sub
 
    ' preparo la lista delle lavorazioni da mostrare in interfaccia
@@ -192,32 +201,59 @@ Public Class SplitPageUC
             If Math.Abs(Mach.m_dSideAng) < EPS_ANG_SMALL Then
                sText = EgtMsg(90791) & " " & i.ToString()
                If Mach.m_sLay = NAME_ONPATH Then AddTopText(sText)
+               If Mach.m_bFinalCut Then AddFinalText(sText)
             Else
-               sText = EgtMsg(90791) & " " & i.ToString() & "  " & DoubleToString(Mach.m_dSideAng, 2) & "°"
+                  sText = EgtMsg(90791) & " " & i.ToString() & "  " & DoubleToString(Mach.m_dSideAng, 2) & "°"
             End If
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.SAWING))
+            AddItemToList(i, Mach, sText, MCH_OY.SAWING)
          ElseIf Mach.m_nType = MCH_OY.DRILLING Then       ' Foratura
             Dim sText As String = EgtMsg(90792) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.DRILLING))
+            'm_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.DRILLING))
+            AddItemToList(i, Mach, sText, MCH_OY.DRILLING)
          ElseIf Mach.m_nType = MCH_OY.MILLING Then        ' Fresatura
             Dim sText As String = EgtMsg(90793) & " " & i.ToString()
             If Mach.m_sLay = NAME_ONPATH Then AddTopText(sText)
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.MILLING))
+            'm_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.MILLING))
+            AddItemToList(i, Mach, sText, MCH_OY.MILLING)
          ElseIf Mach.m_nType = MCH_OY.POCKETING Then      ' Svuotatura
             Dim sText As String = EgtMsg(90796) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.POCKETING))
+            'm_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.POCKETING))
+            AddItemToList(i, Mach, sText, MCH_OY.POCKETING)
          ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then   ' Waterjet
             Dim sText As String = EgtMsg(90797) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.WATERJETTING))
+            'm_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.WATERJETTING))
+            AddItemToList(i, Mach, sText, MCH_OY.WATERJETTING)
          End If
       Next
    End Sub
 
+   Private Sub AddItemToList(i As Integer, Mach As SplitMach, sText As String, nMach As Integer)
+      Dim sTCPos As String = String.Empty
+      ' Visualizzo la posizione utensile solo se configurata
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         Dim sSawing As String = String.Empty, sSaw As String = String.Empty
+         GetCurrSawingAndSaw(Mach.m_nId, sSawing, sSaw)
+         ' Verifico che sia montata su un portautensile
+         EgtTdbSetCurrTool(sSaw)
+         EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+      End If
+      ' Se TCPos non trovato
+      If String.IsNullOrEmpty(sTCPos) Then
+         ' Inserisco solo nome lavorazione
+         m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, nMach))
+      Else
+         ' altrimenti se esiste una lama impostata nell'if sopra 
+         Dim sawColor As Color3d = Utility.GetColorPV()
+         Dim tmpSawColor As System.Windows.Media.Color = System.Windows.Media.Color.FromRgb(sawColor.R, sawColor.G, sawColor.B)
+         m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, nMach, sTCPos, New SolidColorBrush(tmpSawColor)))
+      End If
+   End Sub
+
 #Region "BRIDGE"
 
    Private Sub OnMyMouseDownSceneBridges(sender As Object, e As System.Windows.Forms.MouseEventArgs,
@@ -242,7 +278,7 @@ Public Class SplitPageUC
          ' recupero il nome del Layer
          EgtGetName(nIdParent, sLayer)
          ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
-         If sLayer = NAME_OUTLOOP Then
+         If sLayer = NAME_OUTLOOP Or sLayer = "WjRectification" Then
             If (EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE) AndAlso VerifySideIsAcceptable(nIdMy) Then
                If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
                   EgtDeselectObj(m_nIdSelectedSideWJ)
@@ -275,7 +311,7 @@ Public Class SplitPageUC
                         m_nIdSelectedSideWJ = GDB_ID.NULL
                         nIdParentPart = GDB_ID.NULL
                         m_CurrProjPage.ClearMessage()
-                        m_CurrProjPage.SetWarningMessage("Bridge intersects part")
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(91216))      ' Bridge intersects part
                         Return
                      End If
                   End If
@@ -343,7 +379,6 @@ Public Class SplitPageUC
          EgtTrimCurveEndAtLen(nIdBridge, dLen - 10 * EPS_SMALL)
          EgtTrimCurveStartAtLen(nIdBridge, 10 * EPS_SMALL)
       End If
-      ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
       Dim nIdPart As Integer = GDB_ID.NULL
       nIdPart = EgtGetFirstPartInRawPart(m_CurrProjPage.m_nRawId)
       While nIdPart <> GDB_ID.NULL
@@ -351,7 +386,6 @@ Public Class SplitPageUC
          Dim nIdSurf As Integer = EgtGetFirstInGroup(nIdRegion)
          While nIdSurf <> GDB_ID.NULL
             If EgtGetType(nIdSurf) = GDB_TY.SRF_FRGN Then
-               ' EgtSaveFile("c:\EgtData\OmagCUT\Temp\Bridge.nge", NGE.BIN)
                ' se la linea bridge interseca la superficie allora restitusco false
                If EgtCurveWithRegionClassify(nIdBridge, nIdSurf) <> CREGC.OUT Then
                   EgtExtendCurveStartByLen(nIdBridge, 10 * EPS_SMALL)
@@ -368,21 +402,22 @@ Public Class SplitPageUC
    Private Function VerifySideIsAcceptable(nMyId As Integer) As Boolean
       Dim dVal As Double = 0
       ' verifico che l'entità selezionata non contenga questi parametri
-      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE2, dVal) Then
-         If dVal <> 0 Then
-            Return False
-         End If
-      End If
+      ' If EgtGetInfo(nMyId, INFO_SIDE_ANGLE2, dVal) Then
+      '    If dVal <> 0 Then
+      '       Return False
+      '    End If
+      ' End If
       If EgtGetInfo(nMyId, INFO_SIDE_ANGLE, dVal) Then
          If dVal <> 0 Then
             Return False
          End If
       End If
-      If EgtGetInfo(nMyId, INFO_ORIG_SIDE_ANGLE, dVal) Then
-         If dVal <> 0 Then
-            Return False
-         End If
-      End If
+      ' ' Non bastano i controlli sopra...?
+      ' If EgtGetInfo(nMyId, INFO_ORIG_SIDE_ANGLE, dVal) Then
+      '    If dVal <> 0 Then
+      '       Return False
+      '    End If
+      ' End If
       ' altrimenti l'entità è accettabile
       Return True
    End Function
@@ -455,9 +490,46 @@ Public Class SplitPageUC
 
 #End Region    ' Bridge
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene_DoubleClick
+      OnOffCut()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse m_bShow Then Return
+
+      If e.Button = Windows.Forms.MouseButtons.Right And m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         Dim nCurrCtx As Integer = EgtGetCurrentContext()
+         Dim nSel1 As Integer = GDB_ID.NULL
+         Dim nPvId As Integer = GDB_ID.NULL
+         Dim nMchId As Integer = GDB_ID.NULL
+         EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel1)
+         Dim nId1 As Integer = EgtGetFirstObjInSelWin()
+         While nId1 <> GDB_ID.NULL
+            ' Verifico sia un attacco o uscita di taglio con lama
+            Dim nType As Integer = 0
+            Dim sName As String = ""
+            EgtGetName(nId1, sName)
+            nPvId = EgtGetParent(EgtGetParent(nId1))
+            nMchId = GDB_ID.NULL
+            If String.Compare(sName, NAME_PV_PRECUT) = 0 Or String.Compare(sName, NAME_PV_POSTCUT) = 0 Or String.Compare(sName, NAME_PV_CUT) = 0 Then
+               If EgtGetInfo(nPvId, "MId", nMchId) Then
+                  Exit While
+               End If
+            End If
+            nId1 = EgtGetNextObjInSelWin()
+         End While
+
+         If nMchId = GDB_ID.NULL Then
+            GetCurrSelection()
+            Return
+         End If
+
+         ChangeMachinig(nMchId)
+         GetCurrSelection()
+         Return
+      End If
+
       ' Si può selezionare solo con il tasto sinistro e se stato NULL
       If e.Button <> Windows.Forms.MouseButtons.Left Or
          Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
@@ -477,6 +549,7 @@ Public Class SplitPageUC
          If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL And m_nIdSelectedPartWJ_End <> GDB_ID.NULL Then
             DeselectWJBridgesPart()
          End If
+         GetCurrSelection()
          Return
       End If
 
@@ -485,6 +558,7 @@ Public Class SplitPageUC
          OnMyMouseDownSceneBridgesDelete(sender, e)
          ' aggiorno la visualizzazione delle lavorazioni e la lista
          RefreshMachList()
+         GetCurrSelection()
          Return
       End If
 
@@ -566,7 +640,108 @@ Public Class SplitPageUC
          m_nDragInd = -1
          m_nDragType = 0
          m_nSelected = GDB_ID.NULL
+         If Not IsNothing(MachiningLsBx.SelectedItem) Then
+            MarkMachining(MachiningLsBx.SelectedItem.Ind, False)
+            EgtDraw()
+         End If
+         MachiningLsBx.SelectedIndex = -1
       End If
+      GetCurrSelection()
+   End Sub
+
+   Private Sub ChangeMachinig(nMchId As Integer)
+      ' Imposto la lavorazione corrente
+      Dim sSawing As String = String.Empty
+      Dim EntId As Integer = GDB_ID.NULL
+      Dim SubEntId As Integer = GDB_ID.NULL
+      EgtSetCurrMachining(nMchId)
+      If Not EgtGetMachiningGeometry(0, EntId, SubEntId) Then Return
+      ' verifico se la lavorazione selezionata ha un angolo di inclinazione
+      Dim dSideAng As Double = 0.0
+      EgtGetMachiningParam(MCH_MP.SIDEANGLE, dSideAng)
+      Dim sDefMach As String = DEF_MACHINING
+      If Math.Abs(dSideAng) > 0 Then
+         sDefMach = DEF_MACHINING_TILTED
+      End If
+      ' Recupero il nome della lavorazione
+      EgtGetInfo(EntId, sDefMach, sSawing)
+
+      ' Apro pagina di selezione della lavorazione
+      Dim m_ChangeToolPage = New ChangeToolWD(m_MainWindow)
+      ' Imposto nome lavorazione corrente
+      m_ChangeToolPage.CurrSawing = sSawing
+      ' apro la finestra per la selezione delle lavorazioni
+      m_ChangeToolPage.ShowDialog()
+
+      ' se seleziono "Ok" allora resetto tutte le lavorazioni del progetto
+      If m_ChangeToolPage.DialogResult Then
+         EgtSetInfo(EntId, sDefMach, m_ChangeToolPage.NewSawing)
+         Dim Index As Integer = 0
+         For Index = 0 To m_MachiningList.Count() - 1
+            If m_MachiningList(Index).m_nId = nMchId Then
+               Exit For
+            End If
+         Next
+         Dim nNewMchId As Integer = -1
+         CamAuto.AddSawMachining(nMchId, nNewMchId)
+         ' Elimino la numerazione e la freccia
+         EgtErase(m_MachiningList(Index).m_nArrId)
+         EgtErase(m_MachiningList(Index).m_nNbrId)
+         Dim Mach As New SplitMach
+         ' Sostituisco la vecchia lavorazione con la nuova
+         If SplitAuto.CreateMach(Mach, nNewMchId) Then
+            ' Assegno la lavorazione alla lista
+            m_MachiningList(Index) = Mach
+            ' Riassegno la numerazione
+            NumberDirectionMachining(Index)
+            m_ItemList(Index).TCPos = m_ChangeToolPage.TCPos
+            ' Recupero il colore della lavorazione
+            Dim EgtCol As Color3d = m_ChangeToolPage.EgtColor
+            Dim tmpSawColor As System.Windows.Media.Color = System.Windows.Media.Color.FromRgb(EgtCol.R, EgtCol.G, EgtCol.B)
+            m_ItemList(Index).SawColor = New SolidColorBrush(tmpSawColor)
+            m_ItemList(Index).MachiningTCPosVisibility = Visibility.Visible
+            EgtDraw()
+         End If
+      End If
+   End Sub
+
+   Public Sub GetCurrSawingAndSaw(ByVal nMchId As Integer, ByRef sSawing As String, ByRef sNameTool As String)
+      Dim EntId As Integer = GDB_ID.NULL
+      Dim SubEntId As Integer = GDB_ID.NULL
+      EgtSetCurrMachining(nMchId)
+      If Not EgtGetMachiningGeometry(0, EntId, SubEntId) Then Return
+      ' verifico se la lavorazione selezionata ha un angolo di inclinazione
+      Dim dSideAng As Double = 0.0
+      EgtGetMachiningParam(MCH_MP.SIDEANGLE, dSideAng)
+      Dim sDefMach As String = DEF_MACHINING
+      If Math.Abs(dSideAng) > EPS_ANG_SMALL Then
+         sDefMach = DEF_MACHINING_TILTED
+      End If
+      ' Eventualmente recupero il nome della lavorazione
+      EgtGetInfo(EntId, sDefMach, sSawing)
+      If String.IsNullOrEmpty(sSawing) Then sSawing = m_MainWindow.m_CurrentMachine.sCurrSawing
+      ' Imposto la lavorazione corrente
+      EgtMdbSetCurrMachining(sSawing)
+      ' Recupero il nome dell'utensile della lavorazione
+      EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool)
+   End Sub
+
+   ' Dato l'id della lavorazione nel grezzo colora il taglio del colore assegnato
+   Public Sub ColorsCut(nOperId As Integer, EgtCol As Color3d)
+      ' Recupero la lavorazione
+      Dim nPVRawId As Integer = EgtGetFirstNameInGroup(nOperId, "PV")
+      Dim nPVPartId As Integer = GDB_ID.NULL
+      EgtGetInfo(nPVRawId, "PvId", nPVPartId)
+      Dim nId2 As Integer = EgtGetFirstInGroup(EgtGetFirstInGroup(nPVPartId))
+      Dim sName As String = ""
+      EgtGetName(nId2, sName)
+      While nId2 <> GDB_ID.NULL
+         If String.Compare(sName, NAME_PV_CUT) = 0 Then
+            EgtSetColor(nId2, EgtCol)
+            Exit While
+         End If
+         nId2 = EgtGetNext(nId2)
+      End While
    End Sub
 
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseMoveScene
@@ -597,6 +772,7 @@ Public Class SplitPageUC
          Dim dUsal As Double
          ' ----------------------- REPEAT -----------------------
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanStartAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -630,6 +806,7 @@ Public Class SplitPageUC
          Dim dUeal As Double
          dDelta = -dDelta
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanEndAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
@@ -684,7 +861,11 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub AddTopText(ByRef sName As String)
-      sName &= "  Top"
+      sName &= EgtMsg(91217)    '   Top
+   End Sub
+
+   Private Sub AddFinalText(ByRef sName As String)
+      sName = "Final " & sName
    End Sub
 
    Private Sub RemovePauseText(ByRef sName As String)
@@ -693,6 +874,11 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub MachiningLsBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles MachiningLsBx.SelectionChanged
+      ' se non attiva la modifica allora esco
+      If m_bShow Then
+         MachiningLsBx.SelectedIndex = -1
+         Return
+      End If
       If MachiningLsBx.SelectedItems.Count = 0 Then Return
       If MachiningLsBx.SelectedItems.Count = 1 Then m_bAreHomogeneous = True
       ' creo lista ordinata dei selezionati
@@ -733,6 +919,22 @@ Public Class SplitPageUC
       EgtDraw()
    End Sub
 
+   Private Sub MachiningLsBx_MouseDoubleClick(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.MouseDoubleClick
+      ' se disabilitata la modifica allora esco
+      If m_bShow Then Return
+      If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
+      OnOffCut()
+   End Sub
+
+   Private Sub MachiningLsBx_MouseRightButtonDown(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.PreviewMouseRightButtonDown
+      ' se disabilitata la modifica allora esco
+      If m_bShow Then Return
+      If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
+      Dim Index As Integer = MachiningLsBx.SelectedIndex
+      If Index = -1 Then Return
+      ChangeMachinig(m_MachiningList(Index).m_nId)
+   End Sub
+
    Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
       MoveItem(-1)
    End Sub
@@ -741,6 +943,25 @@ Public Class SplitPageUC
       MoveItem(1)
    End Sub
 
+   Private Sub LayNbArrTgBtn_Click() Handles LayNbArrTgBtn.Click
+      SetLayNbArrTgBtn_Click()
+      WritePrivateProfileString(S_GENERAL, K_SHOWNBARROW, If(LayNbArrTgBtn.IsChecked, "1", "0"), m_MainWindow.GetIniFile())
+   End Sub
+
+   Private Sub SetLayNbArrTgBtn_Click()
+      If LayNbArrTgBtn.IsChecked Then
+         StatusOffNumbArrow(GDB_ST.ON_)
+         LayNbArrTgBtn.ToolTip = EgtMsg(91218)    ' Hide
+         Dim Img As ImageSource = ImageConverter.ConvertFromString("pack://application:,,,/Resources/NewIcons/LightArrowOn.png")
+         LayNbArrImg.Source = Img
+      Else
+         StatusOffNumbArrow(GDB_ST.OFF)
+         LayNbArrTgBtn.ToolTip = EgtMsg(91219)    ' Show
+         Dim Img As ImageSource = ImageConverter.ConvertFromString("pack://application:,,,/Resources/NewIcons/LightArrowOff.png")
+         LayNbArrImg.Source = Img
+      End If
+   End Sub
+
    Private Sub MoveItem(direction As Integer)
       ' Checking selected item
       If m_CurrFirstInd = -1 OrElse MachiningLsBx.SelectedIndex < 0 Then
@@ -916,11 +1137,31 @@ Public Class SplitPageUC
       EnableButtons()
    End Sub
 
-   ' ERRORE: questo evento non è eseguito!
-   Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
-      If e.Key = Key.Escape Then
-         ' se sono in fase di creazione di un ponticello interrompo
-         DeselectWJBridgesPart()
+   '' DA FARE: quando seleziono Esc devo togliere deselezionare tutte le enità!
+   'Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs) Handles Me.KeyDown
+   '   If e.Key = Key.Escape Then
+   '      ' se sono in fase di creazione di un ponticello interrompo
+   '      DeselectWJBridgesPart()
+   '      EgtDeselectAll()
+   '      RemoveMarkAndNumbers()
+   '   End If
+   'End Sub
+
+   Private Sub MachiningLsBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyDown
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = True
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = True
+      End If
+   End Sub
+
+   Private Sub MachiningLsBx_KeyUp(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyUp
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = False
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = False
       End If
    End Sub
 
@@ -1127,37 +1368,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLiPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-            If nLiPrev = MCH_SAW_LI.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ElseIf nLiPrev = MCH_SAW_LI.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLiPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+               If nLiPrev = MCH_SAW_LI.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ElseIf nLiPrev = MCH_SAW_LI.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1195,24 +1445,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenStartBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLiPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-         If nLiPrev = MCH_SAW_LI.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLiPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+            If nLiPrev = MCH_SAW_LI.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1228,37 +1487,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLoPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-            If nLoPrev = MCH_SAW_LO.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ElseIf nLoPrev = MCH_SAW_LO.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLoPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+               If nLoPrev = MCH_SAW_LO.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ElseIf nLoPrev = MCH_SAW_LO.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1296,24 +1564,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenEndBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLoPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-         If nLoPrev = MCH_SAW_LO.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLoPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+            If nLoPrev = MCH_SAW_LO.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1391,6 +1668,12 @@ Public Class SplitPageUC
          ' Se taglio con lama
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dPrevAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
+
+            If Not m_MachiningList(nI).m_bCanStartAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -1566,6 +1849,11 @@ Public Class SplitPageUC
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dNextAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
 
+            If Not m_MachiningList(nI).m_bCanEndAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
 
@@ -1784,7 +2072,7 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      ' ------- VISUALIZZAZIONE -------
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
       If m_bShow Then
          Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
          ' recupero l'operazione successiva
@@ -1867,22 +2155,22 @@ Public Class SplitPageUC
          NumberDirectionMachining(nI)
       Next
 
-      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      ' -------------------- Recupero le lavorazioni indicate come attive -- INIZIO --------------------
       Dim ActiveMachLst As New List(Of Integer)
       For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
-         ActiveMachLst.Add(ItemSplitMach.Ind)
+         If ItemSplitMach.bIsActive Then ActiveMachLst.Add(ItemSplitMach.Ind)
       Next
-      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      ' -------------------- Recupero le lavorazioni indicate come attive --  FINE  --------------------
 
       ' Preparo la lista degli Item
       ShowMachiningList()
 
-      ' -------------------- Riattivo le lavorazioni precedenti --------------------
-
+      ' -------------------- Riattivo le lavorazioni precedenti -- INIZIO --------------------
       For Each Item As SplitMach In m_MachiningList
+         ' spengo tutte le lavorazioni disponibili
          EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
       Next
-
+      ' riattivo solo quelle indicate come attive
       For nIndex As Integer = 0 To ActiveMachLst.Count - 1
          For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
             If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
@@ -1895,7 +2183,7 @@ Public Class SplitPageUC
             End If
          Next
       Next
-      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+      ' -------------------- Riattivo le lavorazioni precedenti --  FINE  --------------------
 
       ' Aggiorno visualizzazione
       EgtDraw()
@@ -2093,6 +2381,33 @@ Public Class SplitPageUC
 
    End Sub
 
+   Private Sub OnOffCut()
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+         ' Imposto flag di modifica
+         m_bModified = True
+         ' recupero l'elenco degli elementi selezionati
+         Dim ItemList As New List(Of NameIdLsBxItem)
+         For Each Item As NameIdLsBxItem In MachiningLsBx.SelectedItems
+            ItemList.Add(Item)
+         Next
+         VerifyHomogenousMachining(ItemList)
+         ' Abilitazione bottone Next
+         EnableButtons()
+      End If
+   End Sub
+
    Private Sub VerifyHomogenousMachining(ItemList As List(Of NameIdLsBxItem))
       If IsNothing(ItemList) OrElse ItemList.Count = 0 Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
@@ -2125,7 +2440,7 @@ Public Class SplitPageUC
       ' eventualmente stampo messaggio
       If Not m_bAreHomogeneous Then
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Lavorazioni non omogenee")
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91220))      ' Lavorazioni non omogenee
       Else
          m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       End If
@@ -2274,6 +2589,11 @@ Public Class SplitPageUC
          ' Aggiungo a numero info con identificativo della lavorazione e viceversa
          EgtSetInfo(nNbrId, "MId", m_MachiningList(nI).m_nId)
          EgtSetInfo(m_MachiningList(nI).m_nId, "NbrId", nNbrId)
+         If Not LayNbArrTgBtn.IsChecked Then
+            EgtSetStatus(nNbrId, GDB_ST.OFF)
+         Else
+            EgtSetStatus(nNbrId, GDB_ST.ON_)
+         End If
       End If
       ' Se taglio con lama, metto la direzione accanto al numero
       If m_MachiningList(nI).m_nType = MCH_OY.SAWING Then
@@ -2285,6 +2605,11 @@ Public Class SplitPageUC
          ' Aggiungo a freccia info con identificativo della lavorazione e viceversa
          EgtSetInfo(nArrId, "MId", m_MachiningList(nI).m_nId)
          EgtSetInfo(m_MachiningList(nI).m_nId, "ArrId", nArrId)
+         If Not LayNbArrTgBtn.IsChecked Then
+            EgtSetStatus(nArrId, GDB_ST.OFF)
+         Else
+            EgtSetStatus(nArrId, GDB_ST.ON_)
+         End If
       Else
          m_MachiningList(nI).m_nArrId = GDB_ID.NULL
       End If
@@ -2401,6 +2726,27 @@ Public Class SplitPageUC
          EgtResetMark(nNbrId)
          EgtResetMark(nArrId)
       End If
+      If Not LayNbArrTgBtn.IsChecked And Not bMark Then
+         EgtSetStatus(nNbrId, GDB_ST.OFF)
+         EgtSetStatus(nArrId, GDB_ST.OFF)
+      Else
+         EgtSetStatus(nNbrId, GDB_ST.ON_)
+         EgtSetStatus(nArrId, GDB_ST.ON_)
+      End If
+   End Sub
+
+   Private Sub StatusOffNumbArrow(Status As GDB_ST)
+      For Each Item As SplitMach In m_MachiningList
+         Dim nOperId As Integer = Item.m_nId
+         Dim nNbrId As Integer = Item.m_nNbrId
+         Dim nArrId As Integer = Item.m_nArrId
+         Dim nInd As Integer = m_MachiningList.IndexOf(Item)
+         If nInd >= 0 AndAlso nInd < m_ItemList.Count AndAlso Not m_ItemList(nInd).IsSelected Then
+            EgtSetStatus(nNbrId, Status)
+            EgtSetStatus(nArrId, Status)
+         End If
+      Next
+      EgtDraw()
    End Sub
 
    Private Sub ColorNumberArrow(nI As Integer)
@@ -2491,6 +2837,10 @@ Public Class SplitPageUC
       Private m_sName As String
       Private m_bIsActive As Boolean
       Private m_nType As Integer
+      ' Posizione porta utensile (parametro non obbligatorio)
+      Private m_sTCPos As String = ""
+      Private m_cSawColor As SolidColorBrush
+      Private m_bMachiningTCPosVisibility As Visibility = Visibility.Hidden
 
       Private m_IsSelected As Boolean
 
@@ -2515,6 +2865,31 @@ Public Class SplitPageUC
          End Set
       End Property
 
+      '!!!!!!!!!!!!!!!!!!!!
+      Public Property TCPos As String
+         Get
+            Return m_sTCPos
+         End Get
+         Set(value As String)
+            If value <> m_sTCPos Then
+               m_sTCPos = value
+               NotifyPropertyChanged("TCPos")
+            End If
+         End Set
+      End Property
+
+      '!!!!!!!!!!!!!!!!!!!!
+      Public Property SawColor As SolidColorBrush
+         Get
+            Return m_cSawColor
+         End Get
+         Set(value As SolidColorBrush)
+            m_cSawColor = value
+            NotifyPropertyChanged("SawColor")
+         End Set
+      End Property
+
+
       Public Property bIsActive As Boolean
          Get
             Return m_bIsActive
@@ -2545,11 +2920,34 @@ Public Class SplitPageUC
          End Set
       End Property
 
+      Public Property MachiningTCPosVisibility As Visibility
+         Get
+            Return m_bMachiningTCPosVisibility
+         End Get
+         Set(value As Visibility)
+            If value <> m_bMachiningTCPosVisibility Then
+               m_bMachiningTCPosVisibility = value
+               NotifyPropertyChanged("MachiningTCPosVisibility")
+            End If
+         End Set
+      End Property
+
       Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer)
          Me.m_sName = Name
          Me.m_nInd = Ind
          Me.m_bIsActive = bIsActive
          Me.m_nType = nType
+         Me.m_bMachiningTCPosVisibility = Visibility.Hidden
+      End Sub
+
+      Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer, sTCPos As String, cSawColor As SolidColorBrush)
+         Me.m_sName = Name
+         Me.m_nInd = Ind
+         Me.m_bIsActive = bIsActive
+         Me.m_nType = nType
+         Me.m_sTCPos = sTCPos
+         Me.m_cSawColor = cSawColor
+         Me.m_bMachiningTCPosVisibility = Visibility.Visible
       End Sub
 
       Public Sub NotifyPropertyChanged(propName As String)

CadCuts/VacuumCups.vb

@@ -567,7 +567,7 @@ Module VacuumCups
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
       Dim sAxisName As String = "C"
       ' verifico che il nome dell'asse impostato sia corretto
-      If Not EgtGetAxisId(sAxisName) Then
+      If EgtGetAxisId(sAxisName) = GDB_ID.NULL Then
          If m_sHeadName = VACUUM_HEAD Then
             sAxisName = "C1"
          Else
@@ -590,7 +590,7 @@ Module VacuumCups
       ' Calcolo gli assi macchina
       Dim dX, dY, dZ As Double
       Dim nStat As Integer
-      If EgtGetAxisId("A") Then
+      If EgtGetAxisId("A") <> GDB_ID.NULL Then
          ' Asse tavola rotante (movimenti solo con A0)
          EgtGetCalcPositions(ptRef, 0, dRotAngMachDeg, nStat, dX, dY, dZ)
          ' Verifico le corse

Constants/ConstGen.vb

@@ -112,6 +112,7 @@ Module ConstGen
    Public Const MAIN_TAB As String = "MainTab"
    Public Const SECOND_TAB As String = "2ndTab"
    Public Const THIRD_TAB As String = "3rdTab"
+   Public Const FORTH_TAB As String = "4thTab"
    ' Nome tavola ausiliaria per spostamento finale pezzi
    Public Const AUX_TAB As String = "AuxTab"
 
@@ -157,6 +158,8 @@ Module ConstGen
    ' Info per identificazione gruppo pezzi
    Public Const INFO_REFGROUP As String = "RefGroup"
    Public Const INFO_COUNTERLY As String = "CounterPz"
+   Public Const INFO_PARKIND As String = "ParkInd"
+   Public Const INFO_PARKSTATUS As String = "ParkStatus"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -223,6 +226,8 @@ Module ConstGen
    Public Const INFO_DEPTH2 As String = "Depth2"
    Public Const INFO_AGG2 As String = "Agg2"
    Public Const INFO_ROUNDOFF As String = "RoundOff"
+   Public Const INFO_DIRECTCUT As String = "DirectCut"
+   Public Const INFO_STEP_TYPE As String = "StepType"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -318,6 +323,12 @@ Module ConstGen
    Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
    ' Info in OutLoop per punto inzio lavorazione WaterJet
    Public Const INFO_START As String = "Start"
+   ' Nome dei tagli diretti inseriti in fase di Splitting
+   Public Const SPLIT_CUT As String = "SplitCut"
+   ' Forzo specifica lavorazione
+   Public Const DEF_MACHINING As String = "Def_Machining"
+   ' Forzo specifica lavorazione solo per tagli con inclinazione
+   Public Const DEF_MACHINING_TILTED As String = "Def_Machining_Tilted"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

Constants/ConstIni.vb

@@ -19,6 +19,7 @@ Module ConstIni
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
    Public Const K_NETKEY As String = "NetKey"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -52,7 +53,10 @@ Module ConstIni
    Public Const K_GENERATECN As String = "GenerateCN"
    Public Const K_FRACTIONPATTERN As String = "FractionPattern"
    Public Const K_PRECISION As String = "Precision"
-
+   Public Const K_QUITDRAWPAGE As String = "QuitDrawPage"
+   Public Const K_SHOWNBARROW As String = "ShowNbArrow"
+   Public Const K_SHOWEXPIREASSITANCE As String = "ShowExpireAssistance"
+   Public Const K_ENABLEDXFPARK As String = "EnableDXFPark"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -86,6 +90,7 @@ Module ConstIni
    Public Const K_TEXMAXLINPIX As String = "TextureMaxLinPixels"
    Public Const K_ZOOMWIN As String = "ZoomWin"
    Public Const K_DISTLINE As String = "DistLine"
+   Public Const K_ORTOGRAPHIC As String = "OrtoGraphic"
 
    Public Const S_ALZFRONT As String = "Alz&Front"
    Public Const K_ALZFRONT As String = "Alz&Front"
@@ -207,6 +212,7 @@ Module ConstIni
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
    Public Const K_OFFSXINTERY As String = "OffsYInterY"
+   Public Const K_OFFSXINTERYSAWTH As String = "OffsYInterYSawTh"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -231,10 +237,13 @@ Module ConstIni
    Public Const K_OTHERREFTABX As String = "OtherRefTabX"
    Public Const K_OTHERREFTABY As String = "OtherRefTabY"
    Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+   Public Const K_REFTAB As String = "RefTab"
+   Public Const K_CURRENTREFTAB As String = "CurrRefTab"
 
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
+   Public Const K_EXTRASTEP As String = "ExtraStep"
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
@@ -275,6 +284,8 @@ Module ConstIni
    Public Const K_MACHINESDIR As String = "MachinesDir"
    Public Const K_TOOLMAKERSDIR As String = "ToolMakersDir"
    Public Const K_CURRMACH As String = "CurrMach"
+   Public Const K_ENABLEFINALSAWCUT As String = "EnableFinalSawCut"
+   Public Const K_FINALDEPTH As String = "FinalDepth"
 
    Public Const S_SIMUL As String = "Simul"
    Public Const K_SLIDERX As String = "SliderX"
@@ -286,6 +297,8 @@ Module ConstIni
    Public Const S_VEINMATCHING As String = "VeinMatching"
    Public Const K_VEINMA_ENABLE As String = "Enable"
    Public Const K_VEINMA_PLACE As String = "WinPlace"
+   Public Const K_VEINMA_WIDTH As String = "Width"
+   Public Const K_VEINMA_HEIGHT As String = "Height"
 
    Public Const S_FASTGRID As String = "FastGrid"
    Public Const K_FG_ENABLE As String = "FGEnable"
@@ -332,6 +345,7 @@ Module ConstIni
    Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
    Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
    Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
    Public Const K_DC_FLATT_POSX As String = "FlattPosX"
    Public Const K_DC_FLATT_POSY As String = "FlattPosY"
    Public Const K_DC_POLISH_NAME As String = "PolishName"
@@ -342,6 +356,9 @@ Module ConstIni
    Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
    Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
    Public Const K_ENABLEINVERT As String = "EnableInvert"
+   Public Const K_ENABLECUSTOMGRID As String = "EnableCustomGrid"
+   Public Const K_GRIDNUMDIMXCUSTOM As String = "GridNumDimXCustom"
+   Public Const K_GRIDNUMDIMYCUSTOM As String = "GridNumDimYCustom"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstMachIni.vb

@@ -32,6 +32,7 @@
    Public Const K_A10ID As String = "A10Id"
    Public Const K_DELTA_C As String = "DeltaC"
    Public Const K_ININCHES As String = "InInches"
+   Public Const K_CPOS As String = "CPos"
 
    Public Const S_NCSIEMENS As String = "NcSiemens"
    Public Const K_COMM_NAME As String = "CommName"
@@ -97,6 +98,9 @@
    Public Const K_ENABLEZONE As String = "EnableZone"
    Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
+   Public Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Public Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Public Const BTN_ENABLE_PC As String = "EnablePC"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
    Public Const K_VACUUM2UP As String = "Vacuum2Up"
@@ -126,6 +130,7 @@
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
    Public Const K_NAXES As String = "nAxes"
+   Public Const K_RESETSTATUS As String = "ResetStatus"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -168,6 +173,7 @@
    Public Const K_ADDITIONALTABLE As String = "AdditionalTable"
    Public Const K_TAB2_ADDITIONALTABLE As String = "Tab2AdditionalTable"
    Public Const K_TAB3_ADDITIONALTABLE As String = "Tab3AdditionalTable"
+   Public Const K_TAB4_ADDITIONALTABLE As String = "Tab4AdditionalTable"
    Public Const K_CENTER_RAW_ONX As String = "CenterRawOnX"
    Public Const K_CHANGETABWD As String = "ChangeTabWD"
 
@@ -176,6 +182,12 @@
    Public Const K_PHOTO_OFFSETY As String = "OffsetY"
    Public Const K_PHOTO_TAB2_OFFSETX As String = "Tab2OffsetX"
    Public Const K_PHOTO_TAB2_OFFSETY As String = "Tab2OffsetY"
+   Public Const K_PHOTO_HQ_OFFSETX As String = "HQOffsetX"
+   Public Const K_PHOTO_HQ_OFFSETY As String = "HQOffsetY"
+   Public Const K_CAMERA_DIRECT_CMD As String = "CameraDirectCmd"
+   Public Const K_CAMERA_STATE_VAR As String = "CameraStateVar"
+   Public Const K_ENABELE_GOHOME_FOR_PHOTO As String = "EnableGoHomeForPhoto"
+   Public Const K_PENDIG_TIME_FOR_PHOTO As String = "PendigTimeForPhoto"
 
    Public Const S_TOOLS As String = "Tools"
    Public Const K_DRILLBIT As String = "Drillbit"
@@ -225,6 +237,7 @@
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
    Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENERTOOLPATH As String = "StartCenterToolPath"
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
@@ -242,7 +255,7 @@
    Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
    Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
    Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
-   ' DrillMillC90
+   Public Const K_MACH_DRILL_MILL_C90 As String = "DrillMillC90"
    ' CutLongDxSx
    ' AngRotMultiCut
    ' MinDistHeadsMultiCut
@@ -301,6 +314,7 @@
 
    Public Const S_MACH_MACH As String = "Mach"
    Public Const K_CURRSAW As String = "CurrSaw"
+   Public Const K_CURRSAWTILTED As String = "CurrSawTilted"
    Public Const K_CURRDRILL As String = "CurrDrill"
    Public Const K_CURRMILL As String = "CurrMill"
    Public Const K_CURRMILLNOTIP As String = "CurrMillNoTip"
@@ -308,6 +322,8 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWINGTILTED As String = "CurrSawingTilted"
+   Public Const K_APPLYSAWINGTILTED As String = "ApplySawingTilted"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
    Public Const K_CURRMILLING As String = "CurrMilling"
    Public Const K_CURRPOCKETING As String = "CurrPocketing"

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -53,7 +53,6 @@ Public Class ControlsDirectCutUC
       FlatteningCut
       Polishing
       CopyTemplate
-      SawTest
       SingleCutAuto
       SingleDrill
       Squaring
@@ -79,6 +78,7 @@ Public Class ControlsDirectCutUC
       ' Costruisco la finestra per il nuovo tipo di taglio manuale
       m_SingleCutAuto = New SingleCutAuto
 
+
       'Posizionemento nella griglia delle Page UserControl DirectCutPageUC
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
       m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
@@ -183,6 +183,9 @@ Public Class ControlsDirectCutUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_SingleCut.SetEnableParam(bSaw)
       m_MultipleCut.SetEnableParam(bSaw)
       m_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -99,6 +99,9 @@ Public Class ControlsDirectCutUC1
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       'm_SingleCut.SetEnableParam(bSaw)
       'm_MultipleCut.SetEnableParam(bSaw)
       'm_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -23,6 +23,9 @@ Public Class ControlsMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -72,6 +75,12 @@ Public Class ControlsMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            GetTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
@@ -81,6 +90,22 @@ Public Class ControlsMachineButtonUC
    ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
    '-------------------------------------------------------------------------------
 
+   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -344,33 +369,61 @@ Public Class ControlsMachineButtonUC
    End Sub
 
    Friend Sub ZoneStateChanged(ZoneState As Integer)
-      'Dim sFlag As String = String.Empty
-      'If ZoneState = 1 Then
-      '   sFlag = BTN_ENABLE_ZONE_1
-      'ElseIf ZoneState = 2 Then
-      '   sFlag = BTN_ENABLE_ZONE_2
-      'End If
-      'Dim EnableZoneButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEZONE Then
-      '      EnableZoneButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnableZoneButton) Then
-      '   EnableZoneButton.SetIsChecked(EnableZone)
-      'End If
+      Dim bEnableZone1 As Boolean = False
+      If ZoneState = 1 Then
+         bEnableZone1 = True
+      ElseIf ZoneState = 2 Then
+         bEnableZone1 = False
+      End If
+      ' attivo il comando associato
+      Dim EnableZoneButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_1 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(bEnableZone1)
+      End If
+      ' disattivo l'altro per esclusione
+      EnableZoneButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(Not bEnableZone1)
+      End If
    End Sub
 
-   Friend Sub PcStateChanged(EnablePC As Boolean)
-      'Dim EnablePCButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEPC Then
-      '      EnablePCButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnablePCButton) Then
-      '   EnablePCButton.SetIsChecked(EnablePC)
-      'End If
+   Friend Sub PcStateChanged(EnablePC As Integer)
+      Dim bEnablePC1 As Boolean = False
+      If EnablePC = 1 Then
+         bEnablePC1 = True
+      ElseIf EnablePC = 2 Then
+         bEnablePC1 = False
+      End If
+      ' attivo/disattivo il comando associato
+      Dim EnablePCButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_ENABLEPC & "_1" Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(bEnablePC1)
+      End If
+      ' disattivo/attivo l'altro per esclusione
+      EnablePCButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(Not bEnablePC1)
+      End If
    End Sub
 
 #End Region    ' State Range
@@ -702,8 +755,17 @@ Public MustInherit Class MachineButton
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
+
+      ' versione 2.6h1
+      Dim sCurrTable As String = String.Empty
+      Dim nCuttTable As Integer = 1
+      EgtGetTableName(sCurrTable)
+      If sCurrTable <> "MainTab" Then nCuttTable = 2
+      EgtLuaSetGlobIntVar("CMD.TABLE", nCuttTable)
+
       EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
+
+      ' Leggo variabili da file Lua
       CmdString = String.Empty
       EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
       b2Start = False
@@ -760,11 +822,26 @@ Public Class TwoStateButton
       Set(value As Boolean)
          ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
+         Dim sLuaScriptFile As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
          If value Then
+            sLuaScriptFile &= TLuaScriptName
             ExecuteMDICommand(TLuaScriptName)
          Else
+            sLuaScriptFile &= FLuaScriptName
             ExecuteMDICommand(FLuaScriptName)
          End If
+
+         Dim IsPressedShiftKey As Boolean = False
+         If Keyboard.Modifiers And ModifierKeys.Shift And
+            GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_MainWindow.GetIniFile()) > 4 Then IsPressedShiftKey = True
+         ' procedo all'apertura del file CadCut1 appena generato (solo se generazione corretta)
+         If IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sLuaScriptFile)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End Set
    End Property
    Friend Sub SetIsChecked(value As Boolean)

DirectCuts/CopyTemplateUC.xaml.vb

@@ -166,6 +166,15 @@ Public Class CopyTemplateUC
    Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
       ' Verifico configurazione tavola e grezzo
       If Not m_bTabOk Then Return
+
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -173,14 +182,19 @@ Public Class CopyTemplateUC
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
             Return
          End If
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -188,7 +202,7 @@ Public Class CopyTemplateUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
@@ -196,8 +210,6 @@ Public Class CopyTemplateUC
       Else
          ' Verifico presenza punto da mouse
          If Not m_bMouseOk Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Assegno punto selezionato nel disegno a m_ptTipP1

DirectCuts/CustomGridUC.xaml

@@ -0,0 +1,80 @@
+<UserControl x:Class="CustomGridUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             FontFamily="{DynamicResource OmagCut_Font}"
+             Background="#636974">
+
+   <Grid Name ="CustomGrid" Grid.Row="5" Grid.ColumnSpan="2">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="2.5*"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="1*"/>
+      </Grid.ColumnDefinitions>
+
+      <UniformGrid Grid.Row="0"
+                   Grid.ColumnSpan="2"
+                   Columns="4"
+                   Margin="2,2,0,2">
+         <Button Name="AddCutBtn" Content="+" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"
+                 Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <Button Name="RemoveCutBtn" Content="-" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"
+                 Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <ToggleButton Name="Cut_XTgBtn" Content="X"
+                       Style="{DynamicResource OmagCut_YellowToggleButton}"
+                       Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <ToggleButton Name="Cut_YTgBtn" Content="Y"
+                       Style="{DynamicResource OmagCut_YellowToggleButton}"
+                       Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+      </UniformGrid>
+
+      <TextBlock Name="NumPzXTxBl" Text="Number" Grid.Column="0" Grid.Row="1" HorizontalAlignment="Center"
+                 Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+      <TextBlock Name="DimPzXTxBl" Text="Dimension" Grid.Column="1" Grid.Row="1" HorizontalAlignment="Center"
+                 Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+      <ScrollViewer Background="Transparent" Grid.Row="2"  
+                    Grid.ColumnSpan="2"
+                    VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Hidden">
+         <ListBox Name="CustomGridLstBx" ScrollViewer.CanContentScroll="False">
+            <ItemsControl.ItemsPanel>
+               <ItemsPanelTemplate>
+                  <StackPanel Orientation="Vertical"/>
+               </ItemsPanelTemplate>
+            </ItemsControl.ItemsPanel>
+            <ItemsControl.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="210">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="5*"/>
+                     </Grid.ColumnDefinitions>
+                     <EgtWPFLib:EgtTextBox Text="{Binding sNumber}" Grid.Column="0"
+                                           Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                     <EgtWPFLib:EgtTextBox Text="{Binding sInteraxis}" Grid.Column="2"
+                                           Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  </Grid>
+               </DataTemplate>
+            </ItemsControl.ItemTemplate>
+         </ListBox>
+      </ScrollViewer>
+      <UniformGrid Grid.Row="3"
+                   Grid.ColumnSpan="2"
+                   Columns="2"
+                   Margin="0,2,0,2">
+         <Button Name="UpdateBtn" Content="Update" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <Button Name="ExitBtn" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         </Button>
+      </UniformGrid>
+   </Grid>
+</UserControl>

DirectCuts/CustomGridUC.xaml.vb

@@ -0,0 +1,78 @@
+Imports EgtUILib
+
+Public Class CustomGridUC
+
+#Region "FIELDS & PROPERTIES"
+
+   ' Riferimento a GridCut
+   Private m_refGridCut As GridCut
+
+#End Region    ' Fields & Properties
+
+#Region "CONSTRUCTOR"
+
+   Sub New(GC As GridCut)
+      InitializeComponent()
+      m_refGridCut = GC
+      CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_X
+      Cut_XTgBtn.IsChecked = True
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "EVENTS"
+
+   Private Sub CutX_Selected() Handles Cut_XTgBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         Cut_YTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_X
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub CutY_Selected() Handles Cut_YTgBtn.Click
+      If Cut_YTgBtn.IsChecked Then
+         Cut_XTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_Y
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub AddCut_Click(sender As Object, e As EventArgs) Handles AddCutBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         m_refGridCut.m_ListOfCut_X.Add(New Cut_Axis(0, 0))
+      ElseIf Cut_YTgBtn.IsChecked Then
+         m_refGridCut.m_ListOfCut_Y.Add(New Cut_Axis(0, 0))
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Private Sub RemoveCut_Click(sender As Object, e As EventArgs) Handles RemoveCutBtn.Click
+      Dim CurrIndexListSelected As Integer = -1
+      CurrIndexListSelected = CustomGridLstBx.SelectedIndex
+      If Cut_XTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_refGridCut.m_ListOfCut_X.Count - 1 Then
+            CurrIndexListSelected = m_refGridCut.m_ListOfCut_X.Count - 1
+         End If
+         m_refGridCut.m_ListOfCut_X.RemoveAt(CurrIndexListSelected)
+      ElseIf Cut_YTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_refGridCut.m_ListOfCut_Y.Count - 1 Then
+            CurrIndexListSelected = m_refGridCut.m_ListOfCut_Y.Count - 1
+         End If
+         m_refGridCut.m_ListOfCut_Y.RemoveAt(CurrIndexListSelected)
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Public Sub Update_Click() Handles UpdateBtn.Click
+      m_refGridCut.CreateGridCut()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_refGridCut.SingleCutGrid.Children.Remove(Me)
+   End Sub
+
+#End Region    ' Events
+
+End Class

DirectCuts/DirectCutPageUC.xaml.vb

@@ -146,6 +146,9 @@ Public Class DirectCutPageUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
@@ -176,11 +179,11 @@ Public Class DirectCutPageUC
             Case K_REMOTE
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
-               RemoteBtn.Content = "Remote"
+               RemoteBtn.Content = EgtMsg(90262)      'Remote
             Case K_PARKING
                ParkingBtn.Visibility = Visibility.Visible
                ParkingBtn.Foreground = Brushes.White
-               ParkingBtn.ToolTip = "Parking"
+               ParkingBtn.ToolTip = EgtMsg(90263)     'Parking
          End Select
       Next
    End Sub
@@ -479,7 +482,7 @@ Public Class DirectCutPageUC
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click
       ' Imposto modalità manuale della macchina
-      Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      Dim nResult As Short = m_MainWindow.m_DirectCutPageUC.m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
 
    End Sub
 

DirectCuts/FlatteningCut.xaml

@@ -7,142 +7,185 @@
    mc:Ignorable="d" 
    d:DesignHeight="597.3" d:DesignWidth="256">
 
-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-      <!-- Definizione della Grid FlatteningCut -->
-      <Grid Name="FlatteningCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <!-- Definizione della Grid FlatteningCut -->
+            <Grid Name="FlatteningCutGrid" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
 
-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
+                    <ToggleButton Name="Point1Btn" Grid.Column="0"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-                <ToggleButton Name="Point2Btn" Grid.Column="1"
+                    <ToggleButton Name="Point2Btn" Grid.Column="1"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-            </Grid>
+                </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                          Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
+
+                <Grid Name="DatiTaglioGrid" >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.1"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="0.1"/>
+                    </Grid.RowDefinitions>
+
+                    <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+                <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+                    <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="12" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                    <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                        <ComboBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ComboBox.ItemTemplate>
+                    </ComboBox>
+
+                    <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                </Grid>    
+            </ScrollViewer>
+
+            <Grid Grid.Row="12" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </Grid>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
             </Grid>
-
-      </Grid>
-
-   </Border>
+        
+    </Border>
 
 </UserControl>

DirectCuts/FlatteningCut.xaml.vb

@@ -1,4 +1,7 @@
-Imports EgtUILib
+Imports System.Reflection
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
+Imports OmagCUT.MainWindow
 
 Public Class FlatteningCut
 
@@ -9,6 +12,8 @@ Public Class FlatteningCut
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
    Private m_bSimul As Boolean = False
+   ' Definizione del taglio diretto di questa pagina
+   Private Const FLATTENING As String = "Flattening"
 
    ' Origine tavola e dati grezzo
    Private m_bRawOk As Boolean = False
@@ -35,14 +40,18 @@ Public Class FlatteningCut
    Private m_bHeadSide As Boolean = False
    Private m_nMachType As Integer = 1
    Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
    ' Array delle modalità di acquisizione dei punti
    Private m_PointsModeArray(2) As String
    ' Array delle tipologia di lavorazione della spianatura
-   Private m_TypeArray(1) As String
+   Private m_TypeArray(2) As String
    ' Punto selezionato nel disegno
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,8 +66,9 @@ Public Class FlatteningCut
    End Enum
    ' Costanti che indicano la tipologia di lavorazione della spianatura
    Private Enum MACH_TYPE As Integer
-      ONEWAY = 0
-      ZIGZAG = 1
+      ZIGZAG = 0
+      ONEWAY = 1
+      SPIRAL = 2
    End Enum
    'Costante che indica il lato in cui posizionare i tagli
    Private Enum CutSide As Integer
@@ -66,6 +76,11 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
    ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
@@ -75,8 +90,9 @@ Public Class FlatteningCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Creo lista tipo lavorazione
-      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
       m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(MSG_COMBOBOXPARAM + 38)
+      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
+      m_TypeArray(MACH_TYPE.SPIRAL) = EgtMsg(MSG_COMBOBOXPARAM + 51)
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
@@ -87,22 +103,29 @@ Public Class FlatteningCut
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       WidthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 26)
       OverlapTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 27)
-      ZReleasedTxBl.Text = "Z Svincolo"
+      ZReleasedTxBl.Text = EgtMsg(91235)        'Z Svincolo
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
+      ChainedPathTxBl.Text = EgtMsg(91236)      'Chained path
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
+      m_ToolsArray(TOOL.MILL) = EgtMsg(91237)   'Mill
+      SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dWid = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dWid = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
       m_dOverlap = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, m_dOverlap, m_MainWindow.GetIniFile())
       m_dZReleased = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, m_dZReleased, m_MainWindow.GetIniFile())
       m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_nMachType = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
-      m_bRotLock = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
+      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
@@ -125,16 +148,16 @@ Public Class FlatteningCut
       ' Disabilito registrazione progetto modificato
       EgtDisableModified()
       ' Creo layer temporaneo per crocette
-      m_nTempLay = EgtCreateGroup( GDB_ID.ROOT)
-      EgtSetLevel( m_nTempLay, GDB_LV.TEMP)
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
       ' Origine tavola
       m_bRawOk = True
-      If Not EgtGetTableRef( 1, m_ptTabOri) Then
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
          m_bRawOk = False
          EgtOutLog("Error on TableRef1")
       End If
       ' Dati del grezzo
-      If Not GetRawBox( m_ptRawMin, m_ptRawMax) Then
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
          m_bRawOk = False
          EgtOutLog("Error on RawBox")
       End If
@@ -142,7 +165,7 @@ Public Class FlatteningCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -151,10 +174,10 @@ Public Class FlatteningCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione già definiti
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      LenghtTxBx.Text = LenToString( m_dLen, 1)
-      WidthTxBx.Text = LenToString( m_dWid, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      LenghtTxBx.Text = LenToString(m_dLen, 1)
+      WidthTxBx.Text = LenToString(m_dWid, 2)
       OverlapTxBx.Text = LenToString(m_dOverlap, 2)
       ZReleasedTxBx.Text = LenToString(m_dZReleased, 2)
       ' carico la quota di svincolo per la spianatura
@@ -163,6 +186,9 @@ Public Class FlatteningCut
       SideChBx.IsChecked = m_bHeadSide
       TypeCmBx.SelectedIndex = m_nMachType
       RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile in definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -176,22 +202,22 @@ Public Class FlatteningCut
 
    Friend Sub FlatteningCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString( m_dWid, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString(m_dWid, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If(m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
-      ' imposto la Z di sicurezza corretta
-      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
-      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
+         ' imposto la Z di sicurezza corretta
+         EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+         EgtMdbSave()
          ' Dichiaro sottopagina da non riattivare
          m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
@@ -268,30 +294,43 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -301,15 +340,13 @@ Public Class FlatteningCut
          m_dAngO = dTAngO + 90
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -339,27 +376,40 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
          If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
@@ -367,15 +417,13 @@ Public Class FlatteningCut
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -409,7 +457,7 @@ Public Class FlatteningCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -524,6 +572,16 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
       m_bRotLock = RotLockChBx.IsChecked
       ' Disegno il taglio
@@ -532,6 +590,14 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -583,9 +649,9 @@ Public Class FlatteningCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -600,13 +666,15 @@ Public Class FlatteningCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -620,10 +688,12 @@ Public Class FlatteningCut
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
       ' vedere nella pagina Allarm il capito "Incisioni"
-      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bForceUseMill As Boolean = (m_nTool = TOOL.MILL)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
       If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         Dim bSetTool As Boolean = EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+         If Not bSetTool Then EgtOutLog("Erro nel settaggio utensile lama " & m_MainWindow.m_CurrentMachine.sCurrSaw)
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -658,18 +728,25 @@ Public Class FlatteningCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      ' Inidico che è un taglio Diretto di tipo Flattening
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.Flattening)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
-      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+      If (m_nTool = TOOL.MILL) Then
          EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
       End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Imposto se iniziare la fresatura dal punto indicato
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+      If Not bReducePath Then EgtSetInfo(nCutId, INFO_STRICT, 0)
+
       ' Eventuale bloccaggio rotazione asse C tra le passate
       If RotLockChBx.IsChecked Then
          EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
       End If
+      EgtSetInfo(nCutId, INFO_STEP_TYPE, m_nMachType)
       ' Funzione che crea i tagli successivi al primo
       MultiplyCut(nLayerId, nCutId)
       ' Creo layer per crocetta di riferimento
@@ -702,10 +779,17 @@ Public Class FlatteningCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
+      Dim bEngWithMill As Boolean = (m_nTool = TOOL.MILL)
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+
       ' Recupero spessore della lama (utensile) correntemente attiva
       Dim dThick As Double = GetFootPrintTool()
       If dThick = 0 Then Return False
 
+      ' Salvo la prima curva nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
@@ -723,6 +807,10 @@ Public Class FlatteningCut
       If nStepNum > 1 Then
          dDelta = dWidth / (nStepNum - 1)
       End If
+      ' definisco la larghezza dell'utensile (solo per la fresa)
+      EgtSetInfo(nCutId, INFO_WIDTH, dThick)
+      ' definisco il tipo di utensile da utilizzare
+      EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
       ' Creo vettore delta
       vtDelta *= dDelta
       ' Creo indice per impostare info che indica tipologia di spianatura
@@ -731,6 +819,8 @@ Public Class FlatteningCut
          Dim vtPerpMove As Vector3d = Index * vtDelta
          ' Creo copie
          Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
+         EgtSetInfo(nCut2Id, INFO_WIDTH, dThick)
+         EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
          ' Assegno info direzione a seconda del tipo di spianatura
          If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
             If nTypeIndex = 1 Then
@@ -744,10 +834,78 @@ Public Class FlatteningCut
             EgtSetInfo(nCut2Id, INFO_DIR, 1)
          End If
          EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+         If m_bChainedPath And bEngWithMill Then
+            If bReducePath Then
+               If Index < nStepNum - 1 Then
+                  ExtendLenghtMillPath(nCut2Id, -dThick / 2)
+               ElseIf Index = nStepNum - 1 Then
+                  If nStepNum Mod 2 = 0 Then
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, False, True)
+                  Else
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, True, False)
+                  End If
+               End If
+            End If
+            CutsList.Add(nCut2Id)
+         End If
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+
       Next
+
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+      If m_bChainedPath And bEngWithMill Then
+         ' Decidere se accorciare i tagli del valore del raggio utensile!
+         If bReducePath Then
+            ExtendLenghtMillPath(CutsList(0), -dThick / 2, False, True)
+         End If
+         For Index As Integer = 0 To CutsList.Count - 2
+            If Index Mod 2 <> 0 Then
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtStartPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtStartPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            Else
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtEndPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtEndPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            End If
+         Next
+         Dim ptNear As Point3d
+         EgtStartPoint(CutsList(0), ptNear)
+         Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
+         ' Inidico che è un taglio Diretto di tipo Flattening
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, FlagDirectCuts.Flattening)
+         EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
+         EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
+         ' Se unisco il percorso devo per forza usare la fresa!
+         EgtSetInfo(IdJointCurv, "EngravingWithMill", 1)
+         If Not bReducePath Then EgtSetInfo(IdJointCurv, INFO_STRICT, 0)
+      End If
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+
       Return True
    End Function
 
+   Private Sub ExtendLenghtMillPath(ByVal IdCurv As Integer, ByVal ReduceVal As Double,
+                                    ByVal Optional bStart As Boolean = True, ByVal Optional bEnd As Boolean = True)
+      Dim PtStart As Point3d
+      EgtStartPoint(IdCurv, GDB_RT.GLOB, PtStart)
+      Dim PtEnd As Point3d
+      EgtEndPoint(IdCurv, GDB_RT.GLOB, PtEnd)
+      If bStart Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtStart, GDB_RT.GLOB)
+      If bEnd Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtEnd, GDB_RT.GLOB)
+      Dim dLenLine As Double
+      EgtCurveLength(IdCurv, dLenLine)
+      EgtOutLog("Lunghezza segmento ridotto: " & dLenLine.ToString)
+   End Sub
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)

DirectCuts/GridCut.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="GridCut"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
 
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
@@ -34,19 +34,19 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+            <ToggleButton Name="Point1Btn" Grid.Column="0"
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
-                <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
-            </Grid>
+            <ToggleButton Name="Point2Btn" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+         </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
-            Margin="6,0,6,0">
+                   Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
                   <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
@@ -55,21 +55,22 @@
          </ComboBox>
 
          <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <Grid Grid.Row="5" Grid.ColumnSpan="2">
+         <!-- STANDARD -->
+         <Grid Name ="StandardGrid" Grid.Row="5" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1.5*"/>
                <ColumnDefinition Width="2"/>
@@ -85,31 +86,98 @@
             <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
 
             <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
             <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
             <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}" />
-
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}" />
+   
             <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
             <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
             <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}" />
 
          </Grid>
 
+         <Button Name="CustomGridBtn" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}" 
+                 Margin="10,30,10,30">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" Height="90" Width="90" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                          HorizontalAlignment="Left"
+                          Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!-- SPECIALE -->
+         <!--<Grid Name ="CustomGrid" Grid.Row="5" Grid.ColumnSpan="2">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="2.5*"/>
+            </Grid.RowDefinitions>
+
+            <StackPanel Orientation="Horizontal" Grid.Row="0">
+               <Button Name="AddCutBtn" Content="+" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="35" Height="35" HorizontalAlignment="Left"/>
+               <Button Name="RemoveCutBtn" Content="-" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <ToggleButton Name="Cut_XTgBtn" Content="X"
+                             Style="{DynamicResource OmagCut_YellowToggleButton}"
+                             Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <ToggleButton Name="Cut_YTgBtn" Content="Y"
+                             Style="{DynamicResource OmagCut_YellowToggleButton}"
+                             Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <Button Name="UpdateBtn" Content="Update" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="85" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+            </StackPanel>
+
+            <ScrollViewer Background="Transparent" Grid.Row="1"
+                          Margin="0,5,0,0"
+                          VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Hidden">
+               <ListBox Name="CustomGridLstBx" ScrollViewer.CanContentScroll="False">
+                  <ItemsControl.ItemsPanel>
+                     <ItemsPanelTemplate>
+                        <StackPanel Orientation="Vertical"/>
+                     </ItemsPanelTemplate>
+                  </ItemsControl.ItemsPanel>
+                  <ItemsControl.ItemTemplate>
+                     <DataTemplate>
+                        <Grid Width="210">
+                           <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="5*"/>
+                              <ColumnDefinition Width="1*"/>
+                              <ColumnDefinition Width="5*"/>
+                           </Grid.ColumnDefinitions>
+                           <EgtWPFLib:EgtTextBox Text="{Binding sNumber}" Grid.Column="0"
+                                                 Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                           <EgtWPFLib:EgtTextBox Text="{Binding sInteraxis}" Grid.Column="2"
+                                                 Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                        </Grid>
+                     </DataTemplate>
+                  </ItemsControl.ItemTemplate>
+               </ListBox>
+            </ScrollViewer>
+         </Grid>-->
+
          <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
          <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                   HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
          <Grid Grid.Row="7" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -119,13 +187,13 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          </Grid>
 
          <Grid Grid.Row="11" Grid.ColumnSpan="2">
@@ -135,19 +203,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-            </Grid>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
 
       </Grid>
-
    </Border>
-
 </UserControl>

DirectCuts/GridCut.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Collections.ObjectModel
 
 Public Class GridCut
    ' Riferimenti a pagine
@@ -38,6 +39,14 @@ Public Class GridCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
+
+   ' Gestione griglia Custom
+   Dim m_bCustomGrid As Boolean = False
+   Public m_ListOfCut_X As New ObservableCollection(Of Cut_Axis)
+   Public m_ListOfCut_Y As New ObservableCollection(Of Cut_Axis)
+   Friend m_CustomGrid As CustomGridUC
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -75,17 +84,59 @@ Public Class GridCut
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      GridCutTxt.Text = EgtMsg(90264)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
-      m_nNumX = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
-      m_dDimX = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
-      m_nNumY = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
-      m_dDimY = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
-      m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+
+      ' Carico i dati per i tagli di griglia Custom
+      m_bCustomGrid = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLECUSTOMGRID, 0, m_MainWindow.GetIniFile()) <> 0)
+      If m_bCustomGrid Then
+         LoadCustomData(K_GRIDNUMDIMXCUSTOM, m_ListOfCut_X)
+         LoadCustomData(K_GRIDNUMDIMYCUSTOM, m_ListOfCut_Y)
+      End If
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+      m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+
+   End Sub
+
+   ' Lettura dei dati della griglia Custom
+   Private Sub LoadCustomData(sIpKeyName As String, LocalList As ObservableCollection(Of Cut_Axis))
+      Dim dVal As Double = 0
+      Dim nVal As Integer = 0
+      Dim sVal As String = String.Empty
+      GetPrivateProfileString(S_DIRECTCUTS, sIpKeyName, sVal, sVal, m_MainWindow.GetIniFile())
+      Dim sItems As String() = sVal.Split(";"c)
+      If sItems.Count > 0 Then
+         For Each Item As String In sItems
+            Dim sSubItems As String() = Item.Split(",")
+            If sSubItems.Count = 2 Then
+               If IsNumeric(sSubItems(0)) And IsNumeric(sSubItems(1)) Then
+                  nVal = CInt(sSubItems(0))
+                  StringToDouble(sSubItems(1), dVal)
+                  LocalList.Add(New Cut_Axis(nVal, dVal))
+               End If
+
+            End If
+         Next
+      End If
    End Sub
 
    Private Sub GridCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -124,7 +175,8 @@ Public Class GridCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -133,14 +185,24 @@ Public Class GridCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      SideAngleTxBx.Text = DoubleToString( m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
       NumPzXTxBx.Text = m_nNumX.ToString()
-      DimPzXTxBx.Text = LenToString( m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
       NumPzYTxBx.Text = m_nNumY.ToString()
-      DimPzYTxBx.Text = LenToString( m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -150,21 +212,51 @@ Public Class GridCut
       Point1Btn.IsChecked = False
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      If m_bCustomGrid Then
+         StandardGrid.Visibility = Visibility.Hidden
+         CustomGridBtn.Visibility = Visibility.Visible
+         m_CustomGrid = New CustomGridUC(Me)
+         'CustomGrid.Visibility = Visibility.Visible
+         'Cut_XTgBtn.IsChecked = True
+         'CustomGridLstBx.ItemsSource = m_ListOfCut_X
+      Else
+         StandardGrid.Visibility = Visibility.Visible
+         CustomGridBtn.Visibility = Visibility.Hidden
+         'CustomGrid.Visibility = Visibility.Hidden
+      End If
+
    End Sub
 
 
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString( m_dDimX, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString( m_dDimY, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString(m_dDimX, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString(m_dDimY, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+
+      If m_bCustomGrid Then
+         Dim sGridNumDimXCustom As String = ""
+         For Index_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            sGridNumDimXCustom &= m_ListOfCut_X(Index_X).sNumber & "," & DoubleToString(m_ListOfCut_X(Index_X).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimXCustom <> "" Then sGridNumDimXCustom = sGridNumDimXCustom.Remove(sGridNumDimXCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimXCustom", sGridNumDimXCustom, m_MainWindow.GetIniFile())
+         Dim sGridNumDimYCustom As String = ""
+         For Index_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            sGridNumDimYCustom &= m_ListOfCut_Y(Index_Y).sNumber & "," & DoubleToString(m_ListOfCut_Y(Index_Y).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimYCustom <> "" Then sGridNumDimYCustom = sGridNumDimYCustom.Remove(sGridNumDimYCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimYCustom", sGridNumDimYCustom, m_MainWindow.GetIniFile())
+      End If
+
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
@@ -248,6 +340,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -260,6 +358,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -267,7 +372,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -275,10 +380,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -290,7 +395,7 @@ Public Class GridCut
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -327,6 +432,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -339,6 +450,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -346,7 +464,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -354,10 +472,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -367,7 +485,7 @@ Public Class GridCut
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -405,7 +523,7 @@ Public Class GridCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -483,6 +601,64 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+   Private Sub CustomGridBtn_Click(sender As Object, e As RoutedEventArgs) Handles CustomGridBtn.Click
+      m_CustomGrid.SetValue(Grid.RowProperty, 1)
+      m_CustomGrid.SetValue(Grid.RowSpanProperty, 6)
+      m_CustomGrid.SetValue(Grid.ColumnSpanProperty, 2)
+      SingleCutGrid.Children.Add(m_CustomGrid)
+   End Sub
+
+   '#Region "CUSTOM LIST GRID"
+
+   '   Private Sub CutX_Selected() Handles Cut_XTgBtn.Click
+   '      If Cut_XTgBtn.IsChecked Then
+   '         Cut_YTgBtn.IsChecked = False
+   '         CustomGridLstBx.ItemsSource = m_ListOfCut_X
+   '         CustomGridLstBx.UpdateLayout()
+   '      End If
+   '   End Sub
+
+   '   Private Sub CutY_Selected() Handles Cut_YTgBtn.Click
+   '      If Cut_YTgBtn.IsChecked Then
+   '         Cut_XTgBtn.IsChecked = False
+   '         CustomGridLstBx.ItemsSource = m_ListOfCut_Y
+   '         CustomGridLstBx.UpdateLayout()
+   '      End If
+   '   End Sub
+
+   '   Private Sub AddCut_Click(sender As Object, e As EventArgs) Handles AddCutBtn.Click
+   '      If Cut_XTgBtn.IsChecked Then
+   '         m_ListOfCut_X.Add(New Cut_Axis(0, 0))
+   '      ElseIf Cut_YTgBtn.IsChecked Then
+   '         m_ListOfCut_Y.Add(New Cut_Axis(0, 0))
+   '      End If
+   '      CustomGridLstBx.UpdateLayout()
+   '   End Sub
+
+   '   Private Sub RemoveCut_Click(sender As Object, e As EventArgs) Handles RemoveCutBtn.Click
+   '      Dim CurrIndexListSelected As Integer = -1
+   '      CurrIndexListSelected = CustomGridLstBx.SelectedIndex
+   '      If Cut_XTgBtn.IsChecked Then
+   '         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_X.Count - 1 Then
+   '            CurrIndexListSelected = m_ListOfCut_X.Count - 1
+   '         End If
+   '         m_ListOfCut_X.RemoveAt(CurrIndexListSelected)
+   '      ElseIf Cut_YTgBtn.IsChecked Then
+   '         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_Y.Count - 1 Then
+   '            CurrIndexListSelected = m_ListOfCut_Y.Count - 1
+   '         End If
+   '         m_ListOfCut_Y.RemoveAt(CurrIndexListSelected)
+   '      End If
+   '      CustomGridLstBx.UpdateLayout()
+   '   End Sub
+
+   '   Public Sub Update_Click() Handles UpdateBtn.Click
+   '      CreateGridCut()
+   '      EgtDraw()
+   '   End Sub
+
+   '#End Region    ' Custom Grid
+
    Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -506,9 +682,9 @@ Public Class GridCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -523,13 +699,15 @@ Public Class GridCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -538,7 +716,7 @@ Public Class GridCut
       m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
-   Private Function CreateGridCut() As Boolean
+   Friend Function CreateGridCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
          m_bCutOk = False
@@ -590,11 +768,18 @@ Public Class GridCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      If m_bCustomGrid Then
+         Return MultiplyCut_1(nLayerId)
+      End If
+      Return MultiplyCut_0(nLayerId)
+   End Function
+
+   Private Function MultiplyCut_0(nLayerId As Integer) As Boolean
       ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
       Dim nType As Integer = 0
-      EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam( If( nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
       ' Ricalcolo lo spessore in base all'inclinazione
       dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
       ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
@@ -616,6 +801,16 @@ Public Class GridCut
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, MainWindow.FlagDirectCuts.GridCut)
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Imposto affondamento e angolo di fianco sul taglio
          EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
          EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
@@ -634,6 +829,14 @@ Public Class GridCut
          ' Arretro il punto di partenza di uno spessore lama
          Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
          Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutPerpId, INFO_DIRECTCUT, MainWindow.FlagDirectCuts.GridCut)
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Specchio se è attivo il flag che cambia lato di disegno
          If SideChBx.IsChecked() Then
             Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
@@ -655,7 +858,118 @@ Public Class GridCut
       Return True
    End Function
 
+   Private Function MultiplyCut_1(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = If(SideChBx.IsChecked(), -90, 90)
+
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = If(m_ListOfCut_X.Count = 0, 0.0, m_ListOfCut_X(0).dInteraxis)
+      Dim nNumPzX As Integer = If(m_ListOfCut_X.Count = 0, 0, m_ListOfCut_X(0).nNumber)
+
+      Dim dDimPzY As Double = If(m_ListOfCut_Y.Count = 0, 0.0, m_ListOfCut_Y(0).dInteraxis)
+      Dim nNumPzY As Integer = If(m_ListOfCut_Y.Count = 0, 0, m_ListOfCut_Y(0).nNumber)
+
+      Dim TotLenX As Double = 0
+      For Ind_X As Integer = 0 To m_ListOfCut_X.Count - 1
+         TotLenX = TotLenX + (m_ListOfCut_X(Ind_X).dInteraxis + dThick) * m_ListOfCut_X(Ind_X).nNumber
+      Next
+
+      Dim TotLenY As Double = 0
+      For Ind_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+         TotLenY = TotLenY + (m_ListOfCut_Y(Ind_Y).dInteraxis + dThick) * m_ListOfCut_Y(Ind_Y).nNumber
+      Next
+
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         ' -------------- TAGLI PARALLELI ASSE Y --------------
+         Dim dLenX As Double = dThick + TotLenX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            Dim nCut2Id As Integer = GDB_ID.NULL
+            dDimPzY = m_ListOfCut_Y(IndexList_Y).dInteraxis
+            nNumPzY = m_ListOfCut_Y(IndexList_Y).nNumber
+            ' Calcolo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+            ' Ruoto il vettore di traslazione 
+            vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+            For Index As Integer = 1 To nNumPzY
+               Dim vtPerpMove As Vector3d = Index * vtDelta
+               ' Creo copie
+               nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+               EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutParaId = nCut2Id
+         Next
+
+         ' -------------- TAGLI PARALLELI ASSE X --------------
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + TotLenY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Specchio se è attivo il flag che cambia lato di disegno
+         If SideChBx.IsChecked() Then
+            Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
+            EgtMirror(nCutPerpId, ptStart + Vector3d.FromPolar(dThick / 2, m_dAngO - 90), vtRot, GDB_RT.GLOB)
+            EgtInvertCurve(nCutPerpId)
+         End If
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            Dim nCut3Id As Integer = GDB_ID.NULL
+            dDimPzX = m_ListOfCut_X(IndexList_X).dInteraxis
+            nNumPzX = m_ListOfCut_X(IndexList_X).nNumber
+            ' Calcolo secondo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+            For Index As Integer = 1 To nNumPzX
+               Dim vtPerpMove As Vector3d = vtDelta * Index
+               ' Creo copie
+               nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+               EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutPerpId = nCut3Id
+         Next
+
+      End If
+      Return True
+   End Function
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)
@@ -668,10 +982,10 @@ Public Class GridCut
 
    Private Sub NumPzsTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NumPzXTxBx.EgtClosed, NumPzYTxBx.EgtClosed,
                                                                               DimPzXTxBx.EgtClosed, DimPzYTxBx.EgtClosed, SideChBx.Click
-      StringToInt( NumPzXTxBx.Text, m_nNumX)
-      StringToLen( DimPzXTxBx.Text, m_dDimX)
-      StringToInt( NumPzYTxBx.Text, m_nNumY)
-      StringToLen( DimPzYTxBx.Text, m_dDimY)
+      StringToInt(NumPzXTxBx.Text, m_nNumX)
+      StringToLen(DimPzXTxBx.Text, m_dDimX)
+      StringToInt(NumPzYTxBx.Text, m_nNumY)
+      StringToLen(DimPzYTxBx.Text, m_dDimY)
       m_bHeadSide = SideChBx.IsChecked
       ' Disegno il taglio
       CreateGridCut()
@@ -713,4 +1027,56 @@ Public Class GridCut
       Return True
    End Function
 
+End Class
+
+Public Class Cut_Axis
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   ' Numero di tagli con questo interasse
+   Private m_nNumber As Integer = 0
+   Public Property sNumber As String
+      Get
+         Return m_nNumber.ToString
+      End Get
+      Set(value As String)
+         If IsNumeric(value) Then
+            m_nNumber = CInt(value)
+         End If
+      End Set
+   End Property
+   Public ReadOnly Property nNumber As Double
+      Get
+         Return m_nNumber
+      End Get
+   End Property
+
+   ' Distanza dal taglio precedente
+   Private m_dInteraxis As Double = 0.0
+   Public Property sInteraxis As String
+      Get
+         Return LenToString(m_dInteraxis, 2)
+      End Get
+      Set(value As String)
+         Dim PrevValue As Double = m_dInteraxis
+         If Not StringToLen(value, m_dInteraxis) Then m_dInteraxis = PrevValue
+      End Set
+   End Property
+   Public ReadOnly Property dInteraxis As Double
+      Get
+         Return m_dInteraxis
+      End Get
+   End Property
+
+   'Public ReadOnly Property UpdateSub As Boolean
+   '   Get
+   '      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_CustomGrid.Update_Click()
+   '      Return True
+   '   End Get
+   'End Property
+
+   Sub New(nNumb As Integer, dInter As Double)
+      m_nNumber = nNumb
+      m_dInteraxis = dInter
+   End Sub
+
 End Class

DirectCuts/MachineButtonsUC.xaml.vb

@@ -136,7 +136,7 @@ Public Class MachineButtonsUC
                   ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
                      CurrToggleBtn.Content = "Z - B"
                   ElseIf StateFlagArray(nIndex) = K_REMOTE Then
-                     CurrToggleBtn.Content = "Remote"
+                     CurrToggleBtn.Content = EgtMsg(90262)     'Remote
                   End If
                Catch ex As Exception
                   EgtOutLog("Error loading content " & StateFlagArray(nIndex))

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -53,14 +53,43 @@ Public Class ManualAxesMoveUC
       ' Imposto check per considerare spessore lama
       L1SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
       L2SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
+
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      EgtDraw()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
    End Sub
 
    Private Sub ManualAxesMove_UnLoaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       m_Timer.Stop()
       m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove = (L1SawThChBx.IsEnabled And L1SawThChBx.IsChecked) Or
                                                          (L2SawThChBx.IsEnabled And L2SawThChBx.IsChecked)
+      ' Nascondo la macchina
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+      EgtSetMachineLook(MCH_LOOK.TAB)
+      EgtDraw()
    End Sub
 
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
    Private Sub UpdateAxesNames()
       Dim sL1 As String = String.Empty
       Dim sL2 As String = String.Empty
@@ -125,11 +154,16 @@ Public Class ManualAxesMoveUC
    Private Sub Timer_tick()
       UpdateAxesNames()
       UpdateUseSawThickness()
+      ' Aggiorno posizione macchina in disegno
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private m_MoveClicked As Boolean = False
    Private Sub XXBtn_Click(sender As Object, e As MouseButtonEventArgs) Handles L1Btn.PreviewMouseDown, L2Btn.PreviewMouseDown, L3Btn.PreviewMouseDown, R1Btn.PreviewMouseDown, R2Btn.PreviewMouseDown
       If e.ClickCount > 1 OrElse m_MoveClicked Then
+         EgtOutLog(" → Hold on! Do not click compulsively.")
          Return
       End If
       m_MoveClicked = True
@@ -216,6 +250,7 @@ Public Class ManualAxesMoveUC
    Private Sub SiemensMoveAxis(CurrentBtn As Button)
       ' leggo se stato reset
       If Not m_CN.bResetState Then
+         EgtOutLog("Reset status is 'False', is denied to execute file '\DirectCmd\AxesMove.lua'.")
          m_MoveClicked = False
          Return
       End If

DirectCuts/MultipleCut.xaml.vb

@@ -38,7 +38,8 @@ Public Class MultipleCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
-
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -90,9 +91,14 @@ Public Class MultipleCut
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
       m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       For nI As Integer = 0 To 9
-         m_nNum( nI) = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_NUM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
-         m_dDim( nI) = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_DIM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_nNum(nI) = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_MULT_NUM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_dDim(nI) = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_MULT_DIM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
       Next
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -168,6 +174,11 @@ Public Class MultipleCut
       NumPz10TxBx.Text = m_nNum(9).ToString()
       DimPz10TxBx.Text = LenToString( m_dDim(9), 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -274,6 +285,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -286,6 +303,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -293,7 +317,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
@@ -303,10 +327,10 @@ Public Class MultipleCut
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -354,6 +378,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -366,6 +396,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -373,7 +410,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -381,10 +418,10 @@ Public Class MultipleCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -435,7 +472,7 @@ Public Class MultipleCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -569,13 +606,15 @@ Public Class MultipleCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -606,6 +645,22 @@ Public Class MultipleCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      ' Recupero spessore lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      EgtTdbSetCurrTool(sSaw)
+      Dim dThick As Double = 0
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
+      If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+         EgtOffsetCurve(nCutId, -dThick, OFF_TYPE.EXTEND)
+      End If
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
@@ -698,6 +753,7 @@ Public Class MultipleCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/Polishing.xaml.vb

@@ -180,13 +180,15 @@ Public Class Polishing
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub

DirectCuts/SawTestUC.xaml.vb

@@ -210,17 +210,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -228,10 +241,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -280,17 +293,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -298,10 +324,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -351,7 +377,7 @@ Public Class SawTestUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -450,13 +476,15 @@ Public Class SawTestUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -502,6 +530,10 @@ Public Class SawTestUC
       ElseIf nWSide = MCH_SAW_WS.LEFT Then
          vtPerp = vtDir
          vtPerp.Rotate(Vector3d.Z_AX, +90)
+      Else
+         m_CurrProjPage.ClearMessage()
+         ' 91143 = Set machining side: right or left.
+         m_CurrProjPage.SetInfoMessage(EgtMsg(91143))
       End If
       Dim ptEnd As Point3d = ptStart + vtDir * m_dLen + vtPerp * dThick
       Dim dLen2 As Double = m_dLen / 2

DirectCuts/SingleCutUC.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.Windows.Threading
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 
 Public Class SingleCutUC
 
@@ -40,7 +41,7 @@ Public Class SingleCutUC
    Private m_nTempLay As Integer = GDB_ID.NULL
 
    ' Costanti
-   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MAX_TAB_DEPTH As Double = 10.0  ' sostituita da un m_MaxTabDepth letto da file ini macchina
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
@@ -147,6 +148,8 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
+      ' forzo la verifica dell'affondamento in relazione allo spessore del pezzo
+      DepthTxBx_EgtClosed(Nothing, Nothing)
       ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
 
       ' forzo la macchina ad essere visibile fin da subito
@@ -159,7 +162,7 @@ Public Class SingleCutUC
       ' Aggiorno visualizzazione
       EgtDraw()
 
-      ' Avvi il timer
+      ' Avvio il timer
       m_RefreshTimer.Start()
    End Sub
 
@@ -268,6 +271,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -279,6 +288,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -286,7 +302,8 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H3: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -294,10 +311,11 @@ Public Class SingleCutUC
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H1: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -318,7 +336,6 @@ Public Class SingleCutUC
          m_bPointP1Ok = True
          ' Reimposto eventuale precedente utensile
          EgtSetCalcTool(sTool, sHead, nExit)
-
       End If
 
       ' Disegno il taglio
@@ -348,6 +365,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -359,6 +382,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -366,20 +396,20 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            EgtOutLog("Coordinate punto 2 da H3: " & m_ptTipP2.x.ToString & " ," & m_ptTipP2.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
-
             ' Altrimenti da lama
          Else
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -412,6 +442,7 @@ Public Class SingleCutUC
          m_dAngO = dAngOrizzDeg
          LenghtTxBx.Text = LenToString(m_dLen, 1)
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+         EgtOutLog("Lunghezza taglio: " & dLen.ToString & "Angolo: " & dAngOrizzDeg.ToString)
          CreateSingleCut()
          ' Disegno la macchina nella sua posizione reale
          SetMachineInCurrPos()
@@ -429,7 +460,7 @@ Public Class SingleCutUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -584,13 +615,15 @@ Public Class SingleCutUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -602,6 +635,7 @@ Public Class SingleCutUC
    Private Function CreateSingleCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
+         EgtOutLog("Primo punto non valido")
          m_bCutOk = False
          Return False
       End If
@@ -641,6 +675,8 @@ Public Class SingleCutUC
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Inidico che è un taglio Diretto di tipo SingleCut
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleCut)
       ' Imposto se disabilitare l'inversine di direzione del taglio
       If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento

DirectCuts/SingleDrillUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 Imports System.Collections.ObjectModel
 Public Class SingleDrillUC
    ' Riferimenti a pagine
@@ -72,7 +73,10 @@ Public Class SingleDrillUC
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_sCurrDrill = m_CurrentMachine.sCurrDrill
       GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
-
+      ' rimuovo utensile su uscite 1
+      EgtSetCalcTool("", "H1", 1)
+      ' imposto utensile su uscita 2
+      EgtSetCalcTool(m_sCurrDrill, "H1", 2)
       ' recupero informazioni del foretto usato
       EgtTdbSetCurrTool(m_sCurrDrill)
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
@@ -213,21 +217,33 @@ Public Class SingleDrillUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      If bIsMultiCut Then
+         EgtSetCalcTool(sDrill, "H1", 2)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-
-         ' Ricavo dati Foretto corrente
-         Dim sDrill As String = m_sCurrDrill
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Altrimenti da lama
@@ -235,10 +251,10 @@ Public Class SingleDrillUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -250,10 +266,8 @@ Public Class SingleDrillUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sDrill As String = m_sCurrDrill
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
       End If
 
       ' Disegno il taglio
@@ -371,8 +385,10 @@ Public Class SingleDrillUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -423,7 +439,8 @@ Public Class SingleDrillUC
       End If
 
       Dim nCutId = EgtCreateCircle(nLayerId, ptStart, m_dDiameter / 2)
-
+      ' Inidico che è un taglio Diretto di tipo SingleDrill
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleDrill)
       ' Calcolo punto di inserimento nel grezzo
       Dim ptMin, ptMax As Point3d
       EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
@@ -431,9 +448,9 @@ Public Class SingleDrillUC
       ptIns.z = dRawHeight
       ' Inserisco il pezzo nel grezzo
       EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      EgtSetCurrPhase(1)
       ' Inserisco la lavorazione
       m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
-      EgtSetCurrPhase(1)
       ' Eventuale eliminazione Home finale
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()

DirectCuts/SquaringUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports OmagCUT.MainWindow
 
 Public Class SquaringUC
 
@@ -287,8 +288,10 @@ Public Class SquaringUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -348,6 +351,7 @@ Public Class SquaringUC
       EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtOutLog("Curr tool type in use for squaring: " & If(nType = MCH_TY.SAW_STD, "SAW_STD", "NOT 'SAW_STD'"))
       ' Ricalcolo lo spessore in base all'inclinazione
       dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
       ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
@@ -365,9 +369,14 @@ Public Class SquaringUC
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
-         ' Imposto affondamento e angolo di fianco sul taglio
-         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
-         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Inidico che è un taglio Diretto di tipo Squaring
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, FlagDirectCuts.Squaring)
+         ' Imposto affondamento e angolo di fianco sul taglio (solo se non lama STD)
+         If Not nType = MCH_TY.SAW_STD Then
+            EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+            EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+            EgtOutLog("Curr tool in use is not of type SAW_STD: Depth is limited to raw thickness")
+         End If
          ' Allungo la geometria
          EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
          EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -71,10 +74,37 @@ Public Class VacuumMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            OutLogTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub VacuumUpChanged(VacuumUpState As Boolean)
       Dim VacuumUpButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -371,6 +401,8 @@ Public Class VacuumMachineButtonUC
       Next
    End Sub
 
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,

DrawImport/CompoDimensionUC.xaml

@@ -29,43 +29,43 @@
         </Grid.RowDefinitions>
 
       <TextBlock Name="Label1" Grid.Row="0"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox1" Grid.Column="1" Grid.Row="0" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label2" Grid.Row="1"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox2" Grid.Column="1" Grid.Row="1" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label3" Grid.Row="2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox3" Grid.Column="1" Grid.Row="2" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label4" Grid.Row="3"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox4" Grid.Column="1" Grid.Row="3" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label5" Grid.Row="4"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox5" Grid.Column="1" Grid.Row="4" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label6" Grid.Row="5"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox6" Grid.Column="1" Grid.Row="5" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label7" Grid.Row="6"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox7" Grid.Column="1" Grid.Row="6" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label8" Grid.Row="7"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox8" Grid.Column="1" Grid.Row="7" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label9" Grid.Row="8"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox9" Grid.Column="1" Grid.Row="8" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label10" Grid.Row="9"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox10" Grid.Column="1" Grid.Row="9" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 

DrawImport/DrawPageUC.xaml

@@ -95,7 +95,7 @@
             <Grid Name="TopGrd">
 
                <TextBlock Name="TopTxBl"
-                  Style="{StaticResource OmagCut_ToolsDBTextBlock}" />
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="TopChBx" Style="{StaticResource OmagCut_CheckBox}"
                   HorizontalAlignment="Right" Margin="6,0,6,0"/>
 
@@ -122,7 +122,7 @@
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
 
-            <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
                TextAlignment="Right"/>
             <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>

DrawImport/DrawPageUC.xaml.vb

@@ -1185,22 +1185,42 @@ Public Class DrawPageUC
       Else
          MakeMultipleInsert(InsNbr, sPartName)
       End If
+      ' Attivo il parcheggio dei pezzi Draw (per il corretto posizionamento nella scena)
+      ActivateParkIndZero()
+      Dim bExitPage As Boolean = GetPrivateProfileInt(S_GENERAL, K_QUITDRAWPAGE, 1, m_MainWindow.GetIniFile) <> 0
+      ' Se Shift premuto eseguo il contrario
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         bExitPage = Not bExitPage
+      End If
+      If bExitPage Then
+         ' Aggiorno ambiente principale
+         EgtZoom(ZM.ALL)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         ' Chiudo compo interni nel caso siano aperti
+         LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+         ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+      Else
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         DrawPage_Unloaded(sender, e)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         If String.IsNullOrEmpty(m_MainComponentPage.m_SecondaryComponentPage.m_sCurrCompo) Then
+            DrawPage_Loaded(sender, e)
+         Else
+            LoadSecondaryPage()
+         End If
 
-      ' Aggiorno ambiente principale
-      EgtZoom(ZM.ALL)
-      ' Elimino nome del componente precedente
-      m_sCompoName = String.Empty
-      ' Reset inclinazioni
-      m_SideAngleUC.DeleteSideAngle()
-      ' Chiudo compo interni nel caso siano aperti
-      LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
-      ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
-
+      End If
    End Sub
 
    ' esco dalla pagina corrente
@@ -1221,6 +1241,24 @@ Public Class DrawPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+
+   End Sub
+
+   Private Sub ActivateParkIndZero()
+      ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello dei pezzi disegnati "0"
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind = 0 Then
+            ItemParkInd.Status = GDB_ST.ON_
+         Else
+            ItemParkInd.Status = GDB_ST.OFF
+         End If
+      Next
+      ' Aggiorno lo stato dei pezzi 
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, False)
+      Next
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
@@ -1492,17 +1530,39 @@ Public Class DrawPageUC
       ' Seleziono la Tab e la Page di apertura
       Select Case m_ActiveComponentPage
          Case Pages.MainComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage)
+
          Case Pages.SecondaryComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage.m_SecondaryComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+
          Case Pages.InternalComponent
-            LeftButtonGrd.Children.Remove( m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Remove(m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+
          Case Pages.CompoDimension
-            VariablesGrd.Children.Remove( m_CompoDimension)
+            VariablesGrd.Children.Remove(m_CompoDimension)
+
          Case Pages.SideAngle
-            VariablesGrd.Children.Remove( m_SideAngleUC)
+            Select Case m_SideAngleUC.m_Mode
+               Case SideAngleUC.ModeOpt.SIDEANGLE
+                  SideAngleBtn.IsChecked = False
+                  SideAngleBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.ENGRAVE
+                  EngraveBtn.IsChecked = False
+                  EngraveBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.DRIP
+                  DripCutBtn.IsChecked = False
+                  DripCutBtn_Click(Nothing, Nothing)
+            End Select
+            VariablesGrd.Children.Remove(m_SideAngleUC)
+
          Case Pages.FiloTop
+            FiloTopBtn.IsChecked = False
+            FiloTopBtn_Click(Nothing, Nothing)
             VariablesGrd.Children.Remove(m_FiloTopUC)
+
+         Case Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+
       End Select
 
       ' Pulisco l'ambiente lua

DrawImport/FiloTopUC.xaml.vb

@@ -38,7 +38,7 @@ Public Class FiloTopUC
       m_CallingPage = m_MainWindow.m_ActivePage
 
       ' Imposto messaggi
-      ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
+      ParameterTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 10)       ' Offset
       Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
       Parameter3TxBl.Text = EgtMsg(91138)
 
@@ -46,10 +46,10 @@ Public Class FiloTopUC
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.FiloTop
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
       End If
 
       ' Gestisco visualizzazione dei parametri
@@ -58,9 +58,9 @@ Public Class FiloTopUC
       Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
-      m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
-      ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
-      m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
+      m_dFiloTopOffset = GetPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
+      ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+      m_dFiloTopDepth = GetPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
       Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
       m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
       Parameter3ChBx.IsChecked = m_bCornerradius
@@ -81,8 +81,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_OFFSET, m_dFiloTopOffset)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_OFFSET, m_dFiloTopOffset)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -102,8 +102,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_DEPTH, m_dFiloTopDepth)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_DEPTH, m_dFiloTopDepth)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -215,10 +215,13 @@ Public Class FiloTopUC
                   EgtErase(nLayFiloTop)
                   EgtRemoveInfo(nLayId, "FiloTopRef")
                   EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               Else
+                  m_MainWindow.m_DrawPageUC.MessageTxBx.Text = ""
+                  m_MainWindow.m_DrawPageUC.MessageBrd.Background = Brushes.Transparent
                End If
                ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
             End If
-               nLayId = EgtGetNextLayer(nLayId)
+            nLayId = EgtGetNextLayer(nLayId)
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While

DrawImport/ImportPageUC.xaml

@@ -7,55 +7,57 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
 
-   <!-- Definizione della ImportPage -->
-   <Border>
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         
-         <!-- Definizione della Grid superiore per Button -->
-         <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+    <!-- Definizione della ImportPage -->
+    <Border>
+        <Grid Name="ImportPageGrid" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="7*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
             </Grid.ColumnDefinitions>
-
-            <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="LeftGrid" Grid.RowSpan="3">
             <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="7.25*"/>
-               <RowDefinition Height="0.75*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+
+            <!-- Definizione della Grid superiore per Button -->
+            <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="SideAngleBtn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="FiloTopBtn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="EngraveBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
+               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            </Grid>
+
+            <!-- Definizione della Grid laterale -->
+            <Grid Name="LeftGrid" Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="7.25*"/>
+                    <RowDefinition Height="0.75*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
                 <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
@@ -68,68 +70,68 @@
                     <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
                         <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
                     </Button>
-                </Grid> 
-            
-            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
-               <TextBlock Name="MessageTxBx" TextAlignment="Center"
+                </Grid>
+
+                <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                    <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Border>
+                </Border>
 
-         </Grid>
-
-         <!-- Definizione della Grid inferiore per Button -->
-         <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-            <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-
-            <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-
-            <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
-            <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+            <!-- Definizione della Grid inferiore per Button -->
+            <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+                <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+                <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+
+                <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                  TextAlignment="Right"/>
+                    <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+                <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-            <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-            
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

DrawImport/ImportPageUC.xaml.vb

@@ -38,6 +38,8 @@ Public Class ImportPageUC
    Private Const FT_TRF As Integer = 51
    ' Costante per formato CUT
    Private Const FT_CUT As Integer = 52
+   ' Indice del parcheggio corrente
+   Private NewParkInd As Integer = 0
 
    ' Indentificativo del pezzo selezionato
    Private m_nSelectedPart As Integer = GDB_ID.NULL
@@ -82,12 +84,13 @@ Public Class ImportPageUC
       ResetBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 3)                 'Reset
       mmBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 4)                    'mm
       inchBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 5)                  'inch
-      OrderListBtn.Content = EgtMsg( 90398)                           'Dati Csv
-      TopBtn.Content = EgtMsg( 90384)                                 'Indica Lato Sopra
+      OrderListBtn.Content = EgtMsg(90398)                            'Dati Csv
+      TopBtn.Content = EgtMsg(90384)                                  'Indica Lato Sopra
       PartNumTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 15)                'Numero
       SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
-      FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
+      FiloTopBtn.Content = EgtMsg(90400)                              'Filo Top
       DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
+      EngraveBtn.Content = EgtMsg(91238)                              'Engrave
       DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 
@@ -97,7 +100,6 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub ImportPage_Loaded(sender As Object, e As RoutedEventArgs)
-
       ' abilitazione importazione TRF
       m_bEnableTrf = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                       m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.TRF_IMPORT))
@@ -159,10 +161,14 @@ Public Class ImportPageUC
       ' Verifico esistenza Cad 2d
       GetPrivateProfileString(S_CAD2D, K_CAD2D_NAME, "", m_sCad2dName, m_MainWindow.GetIniFile())
       GetPrivateProfileString(S_CAD2D, K_CAD2D_EXEPATH, "", m_sCad2dPath, m_MainWindow.GetIniFile())
-      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists( m_sCad2dPath)
+      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists(m_sCad2dPath)
 
       ' Pulisco tutto
       ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
       FileListBox.UnselectAll()
       ' inibisco selezione diretta da Scene
       ImportScene.SetStatusNull()
@@ -174,7 +180,7 @@ Public Class ImportPageUC
          UseClosedCurveBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
          SideAngleBtn.Visibility = Windows.Visibility.Visible
-         OrderListBtn.Visibility = If( m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+         OrderListBtn.Visibility = If(m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
          TopBtn.Visibility = Windows.Visibility.Visible
          PartNumberGrd.Visibility = Windows.Visibility.Visible
       Else
@@ -184,7 +190,7 @@ Public Class ImportPageUC
          ResetBtn.Visibility = Windows.Visibility.Hidden
          SideAngleBtn.Visibility = Windows.Visibility.Hidden
          OrderListBtn.Visibility = Windows.Visibility.Hidden
-         TopBtn.Visibility = Windows.Visibility.Hidden 
+         TopBtn.Visibility = Windows.Visibility.Hidden
          PartNumberGrd.Visibility = Windows.Visibility.Hidden
       End If
       mmBtn.IsEnabled = True
@@ -201,6 +207,8 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
+      ' Azzero l'idice di parcheggio
+      NewParkInd = 0
    End Sub
 
    Private Sub LoadGridData()
@@ -343,7 +351,12 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = False
       SideAngleBtn.IsEnabled = False
       FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
       DripDrillBtn.IsEnabled = False
       Return True
    End Function
@@ -361,6 +374,10 @@ Public Class ImportPageUC
          Dim dScale As Double = If(m_bMM, ONEMM, ONEINCH)
          ' Importo file DXF
          bOk = bOk AndAlso EgtImportDxf(sPath, dScale)
+         ' riporto al piano tutte le superifici
+         EgtSelectAll()
+         EgtScale(GDB_ID.SEL, Frame3d.GLOB, 1, 1, 0)
+         EgtDeselectAll()
       ElseIf m_nFileType = FT.NGE Then
          ' Carico Nge
          bOk = bOk AndAlso EgtOpenFile(sPath)
@@ -400,7 +417,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = False
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
             ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -416,7 +437,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = True
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          End If
          ' altrimenti import per cornici
@@ -429,12 +454,12 @@ Public Class ImportPageUC
    End Function
 
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
       ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
       ElseIf FiloTopBtn.IsChecked() Then
-         OnMouseDownSceneFiloTop( e)
+         OnMouseDownSceneFiloTop(e)
       End If
    End Sub
 
@@ -564,14 +589,14 @@ Public Class ImportPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
                      m_DeselectListHole.Add(nLayId)
                      m_SelListHole.Remove(nLayId)
@@ -580,16 +605,16 @@ Public Class ImportPageUC
                   Dim nLayId As Integer = GDB_ID.NULL
                   EgtGetInfo(nId, "ID", nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
                      m_SelListHole.Add(nLayId)
                      m_DeselectListHole.Remove(nLayId)
@@ -615,7 +640,7 @@ Public Class ImportPageUC
 
    Private Sub SelectedPartChanged()
       ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          m_SideAngleUC.ReLoadSideAnglePage()
       End If
    End Sub
@@ -638,7 +663,7 @@ Public Class ImportPageUC
             ' Ciclo sulle regioni
             Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
             While EntId <> GDB_ID.NULL
-               If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
                EntId = EgtGetNext(EntId)
             End While
             RegionId = EgtGetNextName(PartId, NAME_REGION)
@@ -676,8 +701,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -708,8 +737,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -740,8 +773,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -822,20 +859,38 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub OrderListBtn_Click(sender As Object, e As RoutedEventArgs) Handles OrderListBtn.Click
-      Dim DlgOrderList As New CompoCsvData( m_MainWindow)
-      DlgOrderList.SetData( m_sOrder, m_sList)
+      Dim DlgOrderList As New CompoCsvData(m_MainWindow)
+      DlgOrderList.SetData(m_sOrder, m_sList)
       If DlgOrderList.ShowDialog() Then
-         DlgOrderList.GetData( m_sOrder, m_sList)
+         DlgOrderList.GetData(m_sOrder, m_sList)
       End If
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
+      ' Genero l'immagine solo se è abilitata la modalità
+      If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then Print()
       ' Se import per pezzi piatti
       If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
          ' Eseguo importazione pezzi piatti
          LoadFlatParts()
-      ' altrimenti import per cornici
+
+         ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello indicato
+         Dim ListParkInd As New List(Of ParkInd)
+         SelParkIndWD.LoadParkInd(ListParkInd)
+         For Each ItemParkInd As ParkInd In ListParkInd
+            If ItemParkInd.Ind = NewParkInd Then
+               ItemParkInd.Status = GDB_ST.ON_
+            Else
+               ItemParkInd.Status = GDB_ST.OFF
+            End If
+         Next
+         ' Aggiorno lo stato dei pezzi 
+         For Each Item As ParkInd In ListParkInd
+            SelParkIndWD.SetStatusPartInParkInd(Item, False)
+         Next
+
+         ' altrimenti import per cornici
       Else
          LoadFrame()
       End If
@@ -845,6 +900,80 @@ Public Class ImportPageUC
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub
 
+   ' Creo una immagine del progetto da importare salvato nel percorso di progetto "..\(#ProjInd)_ParkInd_(#ParkInd).png"
+   Public Sub Print()
+      ' recupero la lista degli indici di parcheggio
+      NewParkInd = SelParkIndWD.NewParkInd()
+
+      Dim SM_Select As SM = SM.SHADING
+      ' SM_Select = SM.HIDDENLINE
+      ' SM_Select = SM.WIREFRAME
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sPath As String = SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".png"
+      ' Recupero le dimensioni dell'area di stampa
+      Dim dW As Integer = 120
+      Dim dH As Integer = 120
+
+      If Not MainWindow.m_bShowSVGParkInd Then
+         Try
+            ' Prendo l'immagine corrente per la stampa
+            Dim colBackTopColor As Color3d = GetBackTopColor()
+            Dim colBackBottomColor As Color3d = GetBackBottomColor()
+            ' Recupero le dimensioni correnti della pagina di disegno
+            Dim nImgW As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualWidth()
+            Dim nImgH As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualHeight()
+            If Not EgtGetImage(SM_Select, colBackTopColor, colBackBottomColor, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               EgtSetLineAttribs(1)
+               Return
+            End If
+            EgtSetLineAttribs(1)
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            tmpImg.Stretch = Stretch.Uniform
+            tmpImg.EndInit()
+            ' eseguo la stampa
+         Catch
+            ' Rrror in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      Else
+         ' Assegno dei nomi ai pezzi (Da controllare bene se funzione sempre)...riassegno i nomi dopo?
+         Dim nIdPart As Integer = EgtGetFirstPart()
+         Dim nIndex As Integer = 0
+         While nIdPart <> GDB_ID.NULL
+            ' recupero il primo layer del part 
+            Dim nIdLay As Integer = EgtGetFirstLayer(nIdPart)
+            While nIdLay <> GDB_ID.NULL
+               Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdLay)
+               While nIdEnt <> GDB_ID.NULL
+                  EgtSetName(nIdEnt, nIndex.ToString)
+                  nIdEnt = EgtGetNext(nIdEnt)
+                  nIndex = nIndex + 1
+               End While
+               nIdLay = EgtGetNextLayer(nIdLay)
+            End While
+            nIdPart = EgtGetNextPart(nIdPart)
+         End While
+         EgtExportSvg(GDB_ID.ROOT, SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".svg")
+      End If
+
+   End Sub
+
    Private Sub LoadFlatParts()
       ' Cancello regioni di selezione dai pezzi
       Dim PartId As Integer = EgtGetFirstPart()
@@ -917,21 +1046,37 @@ Public Class ImportPageUC
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
       End If
+
       ' Calcolo l'area dei pezzi inseriti
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
+         ' Definisco l'indice di parcheggio asssganto al pezzo
+         If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+            EgtSetInfo(nId, INFO_PARKIND, NewParkInd.ToString)
+            ' Imposto lo stato
+            EgtSetStatus(nId, GDB_ST.ON_)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nId, INFO_PARKSTATUS, GDB_ST.ON_)
+         End If
          dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
       ' Nascondo tutti i pezzi inseriti (per evitare interferenze con pezzi in fase di parcheggio)
       nId = nFirstId
+      Dim GlobBBox As New BBox3d
       While nId <> GDB_ID.NULL
+         Dim bboxTemp As New BBox3d
+         EgtGetBBox(nId, 0, bboxTemp)
+         GlobBBox.Add(bboxTemp)
          EgtSetStatus(nId, GDB_ST.OFF)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+      Dim DimX As Double = GlobBBox.DimX
+      Dim DimY As Double = GlobBBox.DimY
+      Dim BBoxMaxPt As Point3d = GlobBBox.Max
 
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
@@ -968,7 +1113,12 @@ Public Class ImportPageUC
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
-         m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+            ' Mantengo la posizione relativa tra i pezzi
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePartDXF(nId, DimX, DimY, BBoxMaxPt)
+         Else
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         End If
          ' Recupero Id di pezzo successivo
          Dim nNextId As Integer = EgtGetNextPart(nId)
          ' Se richiesto posizionamento diretto, lo eseguo
@@ -1025,22 +1175,24 @@ Public Class ImportPageUC
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
       ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
          If SideAngleBtn.IsChecked() Then
             SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
          Else
             DripCutBtn.IsChecked() = False
          End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
       ElseIf DripDrillBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_UnderDrillUC)
          DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
       ElseIf FiloTopBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
@@ -1067,7 +1219,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1089,8 +1245,72 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1120,6 +1340,9 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1140,8 +1363,9 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1170,7 +1394,11 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
          ' Disabilito bottone reset
@@ -1192,8 +1420,12 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Riabilito bottone reset
@@ -1219,7 +1451,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1241,8 +1477,12 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1301,8 +1541,9 @@ Public Class ImportPageUC
                If nType = GDB_TY.CRV_LINE Or nType = GDB_TY.CRV_ARC Or nType = GDB_TY.CRV_COMPO Then
                   vCrvId.Add(nCrvId)
                End If
-            ElseIf DripDrillBtn.IsChecked
-               if nType = GDB_TY.CRV_ARC
+            ElseIf DripDrillBtn.IsChecked Then
+
+               If nType = GDB_TY.CRV_ARC Then
                   vCrvId.Add(nCrvId)
                End If
             End If
@@ -1328,11 +1569,11 @@ Public Class ImportPageUC
 
    Private Sub Cad2dBtn_Click(sender As Object, e As RoutedEventArgs) Handles Cad2dBtn.Click
 
-      Dim ProcsCad2d As Process() = Process.GetProcessesByName( m_sCad2dName)
+      Dim ProcsCad2d As Process() = Process.GetProcessesByName(m_sCad2dName)
       If ProcsCad2d.Length() > 0 Then
-         ShowWindow( ProcsCad2d(0).MainWindowHandle, 3)
+         ShowWindow(ProcsCad2d(0).MainWindowHandle, 3)
       Else
-         Process.Start( m_sCad2dPath)
+         Process.Start(m_sCad2dPath)
       End If
 
    End Sub
@@ -1341,42 +1582,42 @@ End Class
 
 Public Class IconListBoxItem
 
-    Private m_iPictureID As Integer
-    Private m_sName As String
+   Private m_iPictureID As Integer
+   Private m_sName As String
 
-    Public Property PictureID() As Integer
-        Get
-            Return m_iPictureID
-        End Get
-        Set(value As Integer)
-            m_iPictureID = value
-        End Set
-    End Property
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
 
-    Public Property Name() As String
-        Get
-            Return m_sName
-        End Get
-        Set(value As String)
-            m_sName = value
-        End Set
-    End Property
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
 
-    Public ReadOnly Property PictureString() As String
-        Get
-            Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
-        End Get
-    End Property
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
 
-    Sub New()
-        Me.Name = String.Empty
-        Me.PictureID = 0
-    End Sub
+   Sub New()
+      Me.Name = String.Empty
+      Me.PictureID = 0
+   End Sub
 
-    Sub New(Name As String, PictureID As Integer)
-        Me.Name = Name
-        Me.PictureID = PictureID
-    End Sub
+   Sub New(Name As String, PictureID As Integer)
+      Me.Name = Name
+      Me.PictureID = PictureID
+   End Sub
 
 
 End Class

DrawImport/MainComponentPageUC.xaml.vb

@@ -33,10 +33,26 @@ Public Class MainComponentPageUC
       m_bIsFirstPage = True
       LoadPage()
       CurrentBtn = Nothing
-      Compo9.SetValue(Grid.ColumnProperty, 0)
-      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      ImageCompo9.Visibility = Windows.Visibility.Hidden
-      LabelCompo9.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         ' se il numero delle componenti è superiore a 8 allora inserisco la seconda pagina
+         If GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 8 Then
+            OthersBackGr.Visibility = Visibility.Visible
+            Compo9.SetValue(Grid.ColumnProperty, 0)
+            Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+            ImageCompo9.Visibility = Windows.Visibility.Hidden
+            LabelCompo9.Visibility = Windows.Visibility.Visible
+         Else
+            OthersBackGr.Visibility = Visibility.Hidden
+         End If
+      Else
+         OthersBackGr.Visibility = Visibility.Visible
+         Compo9.SetValue(Grid.ColumnProperty, 0)
+         Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+         ImageCompo9.Visibility = Windows.Visibility.Hidden
+         LabelCompo9.Visibility = Windows.Visibility.Visible
+      End If
+
+
       m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False

DrawImport/SideAngle.vb

@@ -226,6 +226,10 @@ Module SideAngle
                         EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
                         EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
                         EgtSetInfo(EntId, INFO_HEEL, dHeel)
+                        Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+                        If Not String.IsNullOrEmpty(sSawingTilted) Then
+                           EgtSetInfo(EntId, DEF_MACHINING_TILTED, sSawingTilted)
+                        End If
                      End If
                   End If
                End If

DrawImport/SideAngleOneForAllWindow.xaml

@@ -0,0 +1,83 @@
+<Window x:Class="SideAngleOneForAllWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="255.9" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True"
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.7*"/>
+            <RowDefinition Height="0.3*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+         <TextBlock Name="TitleTxBl"
+                    Grid.ColumnSpan="3"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <Grid Grid.Row="1"
+               Grid.Column="1">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="A °"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <TextBlock Grid.Column="1" 
+                       Text="T"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <ComboBox Grid.Row="1"
+                      Name="SideAngleOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+            <ComboBox Grid.Row="1"
+                      Grid.Column="1"
+                      Name="SideHeelOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>            
+         </Grid>
+         
+         <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                    IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+      </Grid>
+   </Border>
+</Window>

DrawImport/SideAngleOneForAllWindow.xaml.vb

@@ -0,0 +1,20 @@
+Public Class SideAngleOneForAllWindow
+
+   Sub New()
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      TitleTxBl.Text = EgtUILib.EgtMsg(91253)
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      DialogResult = False
+   End Sub
+
+End Class

DrawImport/SideAngleUc.xaml

@@ -1,17 +1,17 @@
 <UserControl x:Class="SideAngleUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="636.9" d:DesignWidth="255.9">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="1.2*"/>
-         <ColumnDefinition Width="0.3*"/> 
+         <ColumnDefinition Width="0.3*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
       </Grid.ColumnDefinitions>
@@ -34,182 +34,191 @@
          <RowDefinition Height="0.5*"/>-->
       </Grid.RowDefinitions>
 
-      <Grid>
+      <Grid Name="SideAngleGrid" Grid.ColumnSpan="2">
          <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="0.4*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.4*"/>
+            <!--<ColumnDefinition Width="0.4*"/>-->
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
          </Grid.ColumnDefinitions>
-         <Button Name="PrevBtn" Grid.Column="1" Margin="4,0,4,0" Padding="0" Content="&lt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
-         <Button Name="NextBtn" Grid.Column="2" Margin="4,0,4,0" Padding="0" Content="&gt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <Button Name="PrevBtn" Grid.Column="0" Margin="2,0,2,0" Padding="0" Content="&lt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <Button Name="NextBtn" Grid.Column="1" Margin="2,0,2,0" Padding="0" Content="&gt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <CheckBox Name="SideAngleChBx" Grid.Column="2" Margin="2,0,0,0" Padding="0"/>
       </Grid>
 
       <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="A °"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
       <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="T"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-      <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="NewEntity" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="NewA1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="NewA1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+      <EgtWPFLib:EgtTextBox Name="NewH1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+      <TextBlock Name="Entity1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity2" Grid.Row="2" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity3" Grid.Row="3" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity4" Grid.Row="4" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity5" Grid.Row="5" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity6" Grid.Row="6" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity7" Grid.Row="7" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity8" Grid.Row="8" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity9" Grid.Row="9" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
+                  Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity10" Grid.Row="10" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
-          Margin="-20,0,0,0"/>
+                Margin="-20,0,0,0"/>
       <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
       <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
-          <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1.5*"/>
-                <ColumnDefinition Width="0.3*"/>
-                <ColumnDefinition Width="0.6*"/>
-                <ColumnDefinition Width="0.6*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="0.9*"/>
-            </Grid.RowDefinitions>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1.5*"/>
+            <ColumnDefinition Width="0.3*"/>
+            <ColumnDefinition Width="0.6*"/>
+            <ColumnDefinition Width="0.6*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+         </Grid.RowDefinitions>
 
-            <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
-               Text="Offset"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
-               Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                    Text="Offset"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
+                               Width="85" Height="30"
+                               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
-               Text="Offset2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
-                <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
-                                      Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30" IsLength="False"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
-                                      Grid.Column="3" Grid.Row="12" 
-                                      Width="40" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            </UniformGrid>
+         <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                    Text="Offset2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
+            <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
+                                  Grid.Column="2" Grid.Row="12"
+                                  Width="40" Height="30" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
+                                  Grid.Column="3" Grid.Row="12" 
+                                  Width="40" Height="30"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         </UniformGrid>
 
 
-            <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
-               Text="Affondamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                    Text="Affondamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
-               Text="Accorciamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
-               Text="Angolo"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30" IsLength="False"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                    Text="Accorciamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+                    Text="Angolo"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-        </Grid>
+      </Grid>
 
-        <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
+      <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
                Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" Grid.Column="1" Grid.ColumnSpan="3" Grid.Row="11" Width="90"

DrawImport/SideAngleUc.xaml.vb

@@ -171,25 +171,25 @@ Public Class SideAngleUC
 
       ' Aggiorno valori
       If m_Mode = ModeOpt.DRIP Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
-         Parameter2TxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dDripShort = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
+         Parameter2TxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
+         Parameter4TxBx.Text = LenToString(m_dDripShort, 3)
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
-         m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
+         m_nEngrNbr2 = GetPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
          m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
          m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
          Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
-         Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
+         Parameter2bTxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
          Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
          Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
@@ -311,8 +311,14 @@ Public Class SideAngleUC
       ' Attualmente il vaore m_nCount è inizializzato ad "1"..
       ' Bottoni Prev Next
       If m_nCount <= MAX_LINES Then
-         PrevBtn.Visibility= Windows.Visibility.Hidden
-         NextBtn.Visibility= Windows.Visibility.Hidden
+         PrevBtn.Visibility = Windows.Visibility.Hidden
+         NextBtn.Visibility = Windows.Visibility.Hidden
+         SideAngleChBx.Visibility = Windows.Visibility.Hidden
+
+         NewEntity.Visibility = Windows.Visibility.Hidden
+         NewA1.Visibility = Windows.Visibility.Hidden
+         NewA1TxBx.Visibility = Windows.Visibility.Hidden
+         NewH1TxBx.Visibility = Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -320,6 +326,8 @@ Public Class SideAngleUC
          Grid.SetRow(NextBtn, MAX_LINES - m_nShow)
          NextBtn.Visibility = Windows.Visibility.Visible
          NextBtn.IsEnabled = (m_nCount > m_nCurrPage * MAX_LINES)
+         Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+         SideAngleChBx.Visibility = Windows.Visibility.Visible
       End If
 
       ' Intestazione per angoli di lato
@@ -335,6 +343,8 @@ Public Class SideAngleUC
             Grid.SetRow(HeelBl, MAX_LINES - m_nShow)
             HeelBl.Text = EgtMsg(91654)  ' T
             HeelBl.Visibility = Windows.Visibility.Visible
+            Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+            SideAngleChBx.Visibility = Windows.Visibility.Visible
          End If
       Else
          If m_nCount = 0 Then
@@ -371,7 +381,7 @@ Public Class SideAngleUC
                GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
             End If
          End If
-            Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
+         Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
          GetTxBlFromIndex(Index).Text = If(m_Mode = ModeOpt.SIDEANGLE,
                                            m_SideAngleEntityList(TxBlIndex).sEntityName,
                                            m_DripEntityList(TxBlIndex).sEntityName)
@@ -391,6 +401,145 @@ Public Class SideAngleUC
       Next
    End Sub
 
+   Private Sub CheckedSideAngle() Handles SideAngleChBx.Checked
+      Grid.SetRow(NewEntity, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewA1TxBx, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewH1TxBx, MAX_LINES - m_nShow + 1)
+
+      NewEntity.Text = "A#"
+      ' Se interrompo la creazione di un unico SideAng
+      If Not GetSideAngleFromAllEntities() Then Return
+
+      PrevBtn.Visibility = Visibility.Collapsed
+      NextBtn.Visibility = Visibility.Collapsed
+
+      NewEntity.Visibility = Visibility.Visible
+      NewA1TxBx.Visibility = Visibility.Visible
+      NewH1TxBx.Visibility = Visibility.Visible
+
+      Entity1.Visibility = Visibility.Collapsed
+      A1TxBx.Visibility = Visibility.Collapsed
+      H1TxBx.Visibility = Visibility.Collapsed
+
+      Entity2.Visibility = Visibility.Collapsed
+      A2TxBx.Visibility = Visibility.Collapsed
+      H2TxBx.Visibility = Visibility.Collapsed
+
+      Entity3.Visibility = Visibility.Collapsed
+      A3TxBx.Visibility = Visibility.Collapsed
+      H3TxBx.Visibility = Visibility.Collapsed
+
+      Entity4.Visibility = Visibility.Collapsed
+      A4TxBx.Visibility = Visibility.Collapsed
+      H4TxBx.Visibility = Visibility.Collapsed
+
+      Entity5.Visibility = Visibility.Collapsed
+      A5TxBx.Visibility = Visibility.Collapsed
+      H5TxBx.Visibility = Visibility.Collapsed
+
+      Entity6.Visibility = Visibility.Collapsed
+      A6TxBx.Visibility = Visibility.Collapsed
+      H6TxBx.Visibility = Visibility.Collapsed
+
+      Entity7.Visibility = Visibility.Collapsed
+      A7TxBx.Visibility = Visibility.Collapsed
+      H7TxBx.Visibility = Visibility.Collapsed
+
+      Entity8.Visibility = Visibility.Collapsed
+      A8TxBx.Visibility = Visibility.Collapsed
+      H8TxBx.Visibility = Visibility.Collapsed
+
+      Entity9.Visibility = Visibility.Collapsed
+      A9TxBx.Visibility = Visibility.Collapsed
+      H9TxBx.Visibility = Visibility.Collapsed
+
+      Entity10.Visibility = Visibility.Collapsed
+      A10TxBx.Visibility = Visibility.Collapsed
+      H10TxBx.Visibility = Visibility.Collapsed
+   End Sub
+
+   Private Sub UnCheckSideAngle() Handles SideAngleChBx.Unchecked
+      NewEntity.Visibility = Visibility.Collapsed
+      NewA1TxBx.Visibility = Visibility.Collapsed
+      NewH1TxBx.Visibility = Visibility.Collapsed
+
+      TxBlChBxView()
+      RefreshCheckAndValue()
+   End Sub
+
+   Private Function GetSideAngleFromAllEntities() As Boolean
+      Dim tmpSideAngleList As New List(Of Double)
+      tmpSideAngleList.Clear()
+      Dim tmpSideHeelList As New List(Of Double)
+      tmpSideHeelList.Clear()
+      Dim m_SideAngleOneForAllWindow As New SideAngleOneForAllWindow
+
+      For i As Integer = 0 To m_SideAngleEntityList.Count - 1
+         If Not tmpSideAngleList.Contains(m_SideAngleEntityList(i).dSideAngle) Then
+            tmpSideAngleList.Add(m_SideAngleEntityList(i).dSideAngle)
+         End If
+         If Not tmpSideHeelList.Contains(m_SideAngleEntityList(i).dSideHeel) Then
+            tmpSideHeelList.Add(m_SideAngleEntityList(i).dSideHeel)
+         End If
+      Next
+      NewA1TxBx.Text = DoubleToString(tmpSideAngleList(0), 2)
+      NewH1TxBx.Text = LenToString(tmpSideHeelList(0), 2)
+
+      If tmpSideAngleList.Count > 1 Or tmpSideHeelList.Count > 1 Then
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.ItemsSource = tmpSideAngleList
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.ItemsSource = tmpSideHeelList
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.ShowDialog()
+         If m_SideAngleOneForAllWindow.DialogResult Then
+            NewA1TxBx.Text = DoubleToString(m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedItem, 2)
+            NewH1TxBx.Text = LenToString(m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedItem, 2)
+            UpdateSideAngleAllEntities()
+            UpdateHeelAllEntities()
+         Else
+            SideAngleChBx.IsChecked = False
+            Return False
+         End If
+      End If
+      Return True
+   End Function
+
+   Private Sub UpdateHeelAllEntities()
+      ' Nuovo tallone
+      Dim dSideHeel As Double
+      StringToLen(NewH1TxBx.Text, dSideHeel)
+      ' Verifico stia nei limiti
+      If dSideHeel < 0 Then
+         dSideHeel = 0
+         NewH1TxBx.Text = "0"
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideHeel(Entity.sEntityName, dSideHeel)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
+
+   Private Sub UpdateSideAngleAllEntities()
+      ' Nuovo angolo di inclinazione
+      Dim dSideAngle As Double
+      StringToDouble(NewA1TxBx.Text, dSideAngle)
+      ' Verifico stia nei limiti
+      If dSideAngle < -m_dMaxSideAng Then
+         dSideAngle = -m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      ElseIf dSideAngle > m_dMaxSideAng Then
+         dSideAngle = m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideAngle(Entity.sEntityName, dSideAngle)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
 
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
    Private Function GetChBxFromIndex(Index As Integer) As CheckBox
@@ -495,15 +644,15 @@ Public Class SideAngleUC
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
 
    ' quando esco salvo nel file l'ultima configurazione per le incisioni
-   Private Sub SideAngleUC_Unloaded( sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+   Private Sub SideAngleUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Ricavo nome pezzo
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
          ' Svuoto layer in cui sono presenti i testi con le inclinazioni dei lati
          If m_Mode = ModeOpt.SIDEANGLE Then
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          Else
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          End If
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Nessuna azione necessaria
@@ -516,7 +665,7 @@ Public Class SideAngleUC
          'WritePrivateProfileString( S_SIDES, K_DRIPSHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3), m_MainWindow.GetIniFile())
-         WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
@@ -527,7 +676,6 @@ Public Class SideAngleUC
       EgtDraw()
    End Sub
 
-
    ' aggiunge il messaggio nel disegno, se DripGeom creo la geometria
    Private Sub RefreshSideAngleText()
       Dim PartId As Integer = GDB_ID.NULL
@@ -538,7 +686,7 @@ Public Class SideAngleUC
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
-         ElseIf m_CallingPage = MainWindow.Pages.Import Then
+      ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
          ' Recupero nome pezzo
@@ -600,7 +748,7 @@ Public Class SideAngleUC
          For nIndex As Integer = 1 To m_nCount
             Dim Entity As DripEntity = m_DripEntityList(nIndex - 1)
             ' Imposto check box (se sono stati definiti il numero corretto di CheckBox
-            If nIndex < ( m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
+            If nIndex < (m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
             Dim nChIndex As Integer = nIndex - (m_nCurrPage - 1) * MAX_LINES + MAX_LINES - m_nShow
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
@@ -973,15 +1121,15 @@ Public Class SideAngleUC
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
       If m_nCurrPage = 1 Then Return
       m_nCurrPage -= 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      If m_nCount <= ( m_nCurrPage - 1) * MAX_LINES Then Return
+      If m_nCount <= (m_nCurrPage - 1) * MAX_LINES Then Return
       m_nCurrPage += 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
@@ -993,7 +1141,7 @@ Public Class SideAngleUC
          Dim bVal As Boolean = CurrCheckBox.IsChecked()
          Dim SideIndex As Integer = CInt(CurrCheckBox.Name.Substring(1))
          ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-         Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+         Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
          Dim sCurrSide As String = m_DripEntityList(nCurrSide - 1).sEntityName
          ' aggiorno l'entità con i valori scritti nel campo di testo
          Dim CurrEntity As DripEntity = DripEntity.FindEntity(sCurrSide)
@@ -1179,6 +1327,19 @@ Public Class SideAngleUC
       End If
    End Sub
 
+   '------->   riga nuova
+   Private Sub NewA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewA1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateSideAngleAllEntities()
+      End If
+   End Sub
+
+   Private Sub NewH1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewH1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateHeelAllEntities()
+      End If
+   End Sub
+
    Private Sub SetSideAngleFromTxBx(SideIndex As Integer, AngleTxBx As EgtWPFLib.EgtTextBox)
       ' Nuovo angolo di inclinazione
       Dim dSideAngle As Double
@@ -1192,7 +1353,7 @@ Public Class SideAngleUC
          AngleTxBx.Text = DoubleToString(dSideAngle, 2)
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideAngle(sCurrSide, dSideAngle)
@@ -1262,7 +1423,7 @@ Public Class SideAngleUC
          HeelTxBx.Text = "0"
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideHeel(sCurrSide, dSideHeel)
@@ -1303,10 +1464,15 @@ Public Class SideAngleUC
       If dSideAngle <> 0 Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE, dSideAngle)
          EgtSetInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE, dSideAngle)
-      ' Cancello inclinazione nell'apposito campo info
+         Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+         If Not String.IsNullOrEmpty(sSawingTilted) Then
+            EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED, sSawingTilted)
+         End If
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE)
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE)
+         EgtRemoveInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED)
       End If
       ' Aggiorno lista entità con nuova inclinazione
       CurrEntity.dSideAngle = dSideAngle
@@ -1324,7 +1490,7 @@ Public Class SideAngleUC
       ' Scrivo nuovo tallone nelle info
       If dSideHeel > 10 * EPS_SMALL Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_HEEL, dSideHeel)
-      ' Cancello inclinazione nell'apposito campo info
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_HEEL)
       End If

Frames/FrameCutPageUC.xaml

@@ -123,10 +123,19 @@
                 <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                <TextBlock Name="OffsXInteryTxBl"  Grid.Row="5" Grid.ColumnSpan="2"
-               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Grid.Row="5" Width="50"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                <Grid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="OffsXInteryTxBl" Grid.Column="0"
+                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                    <CheckBox Name="UseInteraxisChBx" Grid.Row="7" Grid.Column="1" Height="30" Width="40" HorizontalAlignment="Right"
+                      Margin="-20,0,0,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Width="50"
+                      Style="{DynamicResource OmagCut_CalculatorTextBox}" IsEnabled="{Binding ElementName=UseInteraxisChBx, Path=IsChecked}"/>
+                </Grid>
 
                 <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
                     <Button Name="MirrorPartBtn" 

Frames/FrameCutPageUC.xaml.vb

@@ -54,6 +54,8 @@ Public Class FrameCutPageUC
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
       Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
       OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
+      Dim bOffsYInterYSawTh As Boolean = False
+      UseInteraxisChBx.IsChecked = (GetPrivateProfileInt(S_FRAME, K_OFFSXINTERYSAWTH, 0, m_MainWindow.GetIniFile()) <> 1)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -73,6 +75,17 @@ Public Class FrameCutPageUC
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
       OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
+      Dim sChBxToolTip As String = EgtMsg(90646)                  'Applica valore indicato\n altrienti spessore lama
+      sChBxToolTip = sChBxToolTip.Replace("/n", "£")
+      Dim sItems As String() = sChBxToolTip.Split("£")
+      For Index As Integer = 0 To sItems.Count - 1
+         If Index = 0 Then
+            sChBxToolTip = sItems(Index).Trim
+         Else
+            sChBxToolTip &= vbCrLf & sItems(Index).Trim
+         End If
+      Next
+      UseInteraxisChBx.ToolTip = sChBxToolTip
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -280,7 +293,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed, UseInteraxisChBx.Click
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -312,6 +325,11 @@ Public Class FrameCutPageUC
       If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
          WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
       End If
+      Dim sUseInteraxis As String = "1"
+      If UseInteraxisChBx.IsChecked Then
+         sUseInteraxis = "0"
+      End If
+      WritePrivateProfileString(S_FRAME, K_OFFSXINTERYSAWTH, sUseInteraxis, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -963,11 +981,22 @@ Public Class FrameCutPageUC
       StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         If dOffsXIntery <= dSawThick Then
-            dMinDist = dSawThick + 5 * EPS_SMALL
+         If UseInteraxisChBx.IsChecked Then
+            If dOffsXIntery < 0 Then
+               dMinDist = 5 * EPS_SMALL
+               OffsXInteryTxBx.Text = "0"
+            Else
+               dMinDist = dOffsXIntery + 5 * EPS_SMALL
+            End If
          Else
-            dMinDist = dOffsXIntery + 5 * EPS_SMALL
+            dMinDist = dSawThick + 5 * EPS_SMALL
          End If
+         'If dOffsXIntery <= dSawThick Then
+         '   dMinDist = dSawThick + 5 * EPS_SMALL
+         '   EgtOutLog("WARNINGS: Saw tickness is more width then interaxis")
+         'Else
+         '   dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         'End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
          dMinDist = dOffsXIntery

LicenseWindow.xaml

@@ -0,0 +1,63 @@
+<Window x:Class="LicenseWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OpenFile" Height="587.4" Width="500.6" WindowStyle="None"         
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="5.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <StackPanel Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3"
+                        Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <TextBlock Name="IconTxBl" Foreground="White" FontSize="32" 
+                           VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                <TextBlock Name="LicenseTxBl"  
+                   Foreground="White" FontSize="20" 
+                   VerticalAlignment="Center" HorizontalAlignment="Left"
+                   TextWrapping="Wrap"/>
+            </StackPanel>
+
+            <StackPanel Grid.Column="1" Grid.Row="2"  Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <ScrollViewer Name="MyScrollViewer" VerticalScrollBarVisibility="Auto">
+                <TextBlock Name="LicenseMsgTxBl" MaxWidth="425"
+                       HorizontalAlignment="Center"
+                       Foreground="{DynamicResource Omag_White}" FontSize="20" VerticalAlignment="Center"
+                       TextWrapping="Wrap"/>
+                </ScrollViewer>
+            </StackPanel>
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

LicenseWindow.xaml.vb

@@ -0,0 +1,37 @@
+Public Class LicenseWindow
+
+   Private m_sMessage As String = String.Empty
+   Private m_sTitle As String = String.Empty
+
+   Public Sub New(Owner As Window, sMsg As String, sTitle As String)
+      Me.Owner = Owner
+      m_sMessage = sMsg
+      m_sTitle = sTitle
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
+   Public Sub Init() Handles Me.Initialized
+      IconTxBl.Text = "⚠️"
+      LicenseTxBl.Text = m_sTitle
+      m_sMessage = m_sMessage.Replace("/n", "£")
+      Dim sItems As String() = m_sMessage.Split("£")
+      For Index As Integer = 0 To sItems.Count - 1
+         If Index = 0 Then
+            m_sMessage = sItems(Index)
+         Else
+            m_sMessage &= vbCrLf & sItems(Index)
+         End If
+      Next
+      LicenseMsgTxBl.Text = m_sMessage
+   End Sub
+
+   Public Sub Exit_Click() Handles ExitBtn.Click
+      Me.Close()
+   End Sub
+
+End Class

Machine/Alarms2PageUC.xaml

@@ -0,0 +1,58 @@
+<UserControl x:Class="Alarms2PageUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="1280">
+   
+   <Border Style="{DynamicResource OmagCut_PageBorder}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="3*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <GroupBox Name="FinalSawCutGpBx" Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+               </Grid.RowDefinitions>
+
+               <TextBlock Name="EnableFinalSawCutTxBl" Grid.Column="0" Grid.Row="0"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <CheckBox Name="EnableFinalSawCutChBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                         Style="{StaticResource OmagCut_CheckBox_Single}" 
+                         HorizontalAlignment="Right"/>
+
+               <TextBlock Name="FinalDepthTxBl" Grid.Column="0" Grid.Row="1"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="FinalDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+
+
+            </Grid>
+         </GroupBox>
+      </Grid>
+   </Border>
+</UserControl>

Machine/Alarms2PageUC.xaml.vb

@@ -0,0 +1,30 @@
+Imports EgtUILib
+
+Public Class Alarms2PageUC
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private Sub Alarms2Page_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      FinalSawCutGpBx.Header = EgtMsg(91254)     ' Taglio Finale
+      EnableFinalSawCutTxBl.Text = EgtMsg(91255) ' Abilita
+      FinalDepthTxBl.Text = EgtMsg(91256)        ' Ultimo Spessore
+   End Sub
+
+   Private Sub Allarm2Page_Loaded() Handles Me.Loaded
+      EnableFinalSawCutChBx.IsChecked = m_MainWindow.m_CurrentMachine.bEnableFinalSawCut
+      FinalDepthTxBx.Text = m_MainWindow.m_CurrentMachine.dFinalDepth
+   End Sub
+
+   Private Sub EnableFinalSawCutChBx_IsChecked() Handles EnableFinalSawCutChBx.Click
+      m_MainWindow.m_CurrentMachine.bEnableFinalSawCut = EnableFinalSawCutChBx.IsChecked
+      WritePrivateProfileString(S_MACH, K_ENABLEFINALSAWCUT, If(m_MainWindow.m_CurrentMachine.bEnableFinalSawCut, "1", "0"), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub FinalDepthTxBx_EgtClosed() Handles FinalDepthTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(FinalDepthTxBx.Text, dVal)
+      m_MainWindow.m_CurrentMachine.dFinalDepth = dVal
+      WritePrivateProfileString(S_MACH, K_FINALDEPTH, DoubleToString(m_MainWindow.m_CurrentMachine.dFinalDepth, 3), m_MainWindow.GetMachIniFile())
+   End Sub
+
+End Class

Machine/AlarmsPageUC.xaml.vb

@@ -57,6 +57,7 @@ Public Class AlarmsPageUC
 
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
+      CurrSawTiltedTxBl.Text = EgtMsg(91049)                             ' Current saw tilted
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
       CurrDrillTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 3)
       CurrCupWheelTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 20)
@@ -93,13 +94,13 @@ Public Class AlarmsPageUC
       WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
       WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
       '-- INIZIO -- nuovi parametri per preforo lavello
-      HolesDiameterWJTxBl.Text = "Diameter"
-      HolesOffsetWJTxBl.Text = "Offset"
-      MinRadiusWJTxBl.Text = "Min Radius"
+      HolesDiameterWJTxBl.Text = EgtMsg(91044)                           ' Diametro
+      HolesOffsetWJTxBl.Text = EgtMsg(91045)                             ' Offset
+      MinRadiusWJTxBl.Text = EgtMsg(91046)                               ' Raggio Minimo
       OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
       '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
-      REctificationWJParamGpBx.Header = "Rectification"
-      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      RectificationWJParamGpBx.Header = EgtMsg(91047)                    ' Rettifica
+      EnableRectificationTxBl.Text = EgtMsg(91048)                       ' Abilita (sottosquadra)
       '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
@@ -120,6 +121,7 @@ Public Class AlarmsPageUC
       CfrPercTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 48)                   ' Riduzione %
       MachiningsGpBx.Header = EgtMsg(MSG_ALARMS2PAGEUC + 1)              ' Lavorazioni
       CurrSawingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 2)                ' Taglio lama
+      CurrSawingTiltedTxBl.Text = EgtMsg(91050)                          ' Taglio inclinato
       CurrDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 3)              ' Foratura
       CurrMillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 4)               ' Fresatura
       CurrPocketingTxBl.Text = EgtMsg(91069)                             ' Svuotatura
@@ -159,7 +161,7 @@ Public Class AlarmsPageUC
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
             'Non faccio alcunchè
-            Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
                'Da implementare
          End Select
 
@@ -292,6 +294,59 @@ Public Class AlarmsPageUC
             ' attivo il bottone per l'apertura della pagina che mostra la configurazione degli utensili in parcheggio
             SetUpBtn.Visibility = Windows.Visibility.Visible
 
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            ' Aggiorno la lista delle lame con quelle montate sul portautensile automatico
+            Dim m_SawOnHolderList As New ObservableCollection(Of String)
+            Dim bOnHolder As Boolean = False
+            For Each sNameTool As String In m_SawList
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Verifico che sia montata su un portautensile
+                  EgtTdbSetCurrTool(sNameTool)
+                  Dim sTCPos As String = String.Empty
+                  EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+                  If Not String.IsNullOrEmpty(sTCPos) Then
+                     ' Cerco nel porta utensili automaitico 
+                     For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                        If ToolPosition.sTool <> String.Empty Then
+                           If sNameTool = ToolPosition.sTool Then
+                              m_SawOnHolderList.Add(sNameTool)
+                              ' Se il nome dell'utensile è lo stesso di quello impostato nella combo allora lo setto
+                              If sNameTool = m_CurrentMachine.sCurrSaw Then
+                                 bOnHolder = True
+                              End If
+                              Exit For
+                           End If
+                        End If
+                     Next
+                  End If
+               End If
+            Next
+            m_SawList = m_SawOnHolderList
+            CurrSawCmBx.ItemsSource = m_SawList
+            If bOnHolder Then
+               ' reimposto la lavorazione di lama e la lama impostate in macchina
+               EgtTdbSetCurrTool(m_CurrentMachine.sCurrSaw)
+               ' Seleziono lama corrente
+               CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
+            Else
+               m_CurrentMachine.sCurrSawing = ""
+            End If
+
+            CurrSawTiltedCmBx.ItemsSource = m_SawList
+            If m_SawList.IndexOf(m_CurrentMachine.sCurrSawTilted) > -1 Then
+               ' Seleziono lama corrente
+               CurrSawTiltedCmBx.SelectedItem = m_CurrentMachine.sCurrSawTilted
+            Else
+               m_CurrentMachine.sCurrSawingTilted = ""
+            End If
+
+            ' attivo la selezione della lama per il taglio in inlinato
+            CurrSawTiltedTxBl.Visibility = Visibility.Visible
+            CurrSawTiltedCmBx.Visibility = Visibility.Visible
+
+            ' attivo il bottone per l'apertura della pagina che mostra la configurazione degli utensili in parcheggio
+            SetUpBtn.Visibility = Windows.Visibility.Visible
+
       End Select
 
       ' aggiorno le TextBlock con le lavorazioni correnti
@@ -441,6 +496,21 @@ Public Class AlarmsPageUC
          CurrSawingTxBl.Visibility = Windows.Visibility.Hidden
          CurrSawingTxBx.Visibility = Windows.Visibility.Hidden
       End If
+      If m_CurrentMachine.sCurrSawingTilted <> String.Empty Then
+         If Not m_CurrentMachine.bApplySawingTilted Then
+            CurrSawingTiltedTxBx.Foreground = Brushes.Gray
+            CurrSawingTiltedTxBx.TextDecorations = TextDecorations.Strikethrough
+         Else
+            CurrSawingTiltedTxBx.Foreground = Brushes.White
+            CurrSawingTiltedTxBx.TextDecorations = Nothing
+         End If
+         CurrSawingTiltedTxBx.Text = m_CurrentMachine.sCurrSawingTilted
+         CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Visible
+         CurrSawingTiltedTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Hidden
+         CurrSawingTiltedTxBx.Visibility = Windows.Visibility.Hidden
+      End If
       If m_CurrentMachine.sCurrDrilling <> String.Empty Then
          CurrDrillingTxBx.Text = m_CurrentMachine.sCurrDrilling
          CurrDrillingTxBl.Visibility = Windows.Visibility.Visible
@@ -641,6 +711,42 @@ Public Class AlarmsPageUC
       RefreschMachining()
    End Sub
 
+   ' -- SAW TILTED --
+   Private Sub CurrSawTiltedCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrSawTiltedCmBx.SelectionChanged
+      If IsNothing(CurrSawTiltedCmBx.SelectedItem) Then Return
+      ' Assegno
+      m_CurrentMachine.sCurrSawTilted = CurrSawTiltedCmBx.SelectedItem.ToString()
+      ' Se nuova lama incompatibile con lavorazione di taglio corrente, resetto quest'ultima
+      Dim sMchTuuid As String = String.Empty
+      Dim sMchTool As String = String.Empty
+      If Not EgtMdbSetCurrMachining(m_CurrentMachine.sCurrSawingTilted) Or
+         Not EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sMchTuuid) Or
+         Not EgtTdbGetToolFromUUID(sMchTuuid, sMchTool) Or
+         String.Compare(sMchTool, m_CurrentMachine.sCurrSawTilted, True) <> 0 Then
+         m_CurrentMachine.sCurrSawingTilted = String.Empty
+      End If
+
+      ' Dim sVal As String = String.Empty
+      ' Dim dVal As Double = 0
+      ' If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+      '    StringToDouble(sVal, dVal)
+      '    m_CurrentMachine.SetFsevLength(dVal)
+      ' End If
+      ' If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+      '    StringToDouble(sVal, dVal)
+      '    m_CurrentMachine.SetFsevPerc(dVal)
+      ' End If
+      ' 
+      ' ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      ' CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      ' CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
+      ' Aggiorno utensili per lavoro in corso
+      m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
+   End Sub
+
    ' -- DRILL --
    Private Sub CurrDrillCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrDrillCmBx.SelectionChanged
       If IsNothing(CurrDrillCmBx.SelectedItem) Then Return
@@ -1193,6 +1299,7 @@ Public Class AlarmsPageUC
       Dim dToolDiam As Double = 0
       Dim dToolThick As Double = 0
       Dim dToolLen As Double = 0
+      Dim dCore As Double = 0
       Dim sToolParam As String = String.Empty
       EgtTdbGetCurrToolParam(MCH_TP.HEAD, sToolParam)
       EgtLuaSetGlobStringVar("CMD.HEAD", sToolParam)
@@ -1204,6 +1311,8 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore)
+      EgtLuaSetGlobNumVar("CMD.CORE", dCore * 1000)
       ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
       Dim nType As Integer
       EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
@@ -1262,7 +1371,7 @@ Public Class AlarmsPageUC
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
       ' Creo MsgBox di attesa
-      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_DIRECTCUTPAGEUC + 41), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
+      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, String.Format(EgtMsg(MSG_DIRECTCUTPAGEUC + 41), ToolForProbing.m_ToolName), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
       m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
       ' Definisco flag tastatura
       Dim bProbingOk As Boolean = False
@@ -1372,7 +1481,7 @@ Public Class AlarmsPageUC
       Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
             Return New ToolPos(m_CurrentMachine.sCurrSaw, "T100", True)
-         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
             Dim ChooseTool As New ChooseToolWD(m_MainWindow)
             If ChooseTool.ShowDialog Then
                Return ChooseTool.GetSelectedTool

Machine/ChooseToolWD.xaml.vb

@@ -76,6 +76,18 @@ Public Class ChooseToolWD
                End If
             Next
             Return True
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               End If
+            Next
+            Return True
          Case Else
             Return False
       End Select

Machine/CurrentMachine.vb

@@ -107,6 +107,7 @@ Public Class CurrentMachine
 
    ' Variabili che contengono il nome degli utensili disponibili per tipo
    Private m_sCurrSaw As String = String.Empty
+   Private m_sCurrSawTilted As String = String.Empty
    Private m_sCurrDrill As String = String.Empty
    Private m_sCurrMill As String = String.Empty
    Private m_sCurrMillNoTip As String = String.Empty
@@ -116,6 +117,8 @@ Public Class CurrentMachine
 
    ' Variabili che contengono le lavorazioni correntemente attive (utilizzate per definire lavorazioni nel programma)
    Private m_sCurrSawing As String = String.Empty
+   Private m_sCurrSawingTilted As String = String.Empty
+   Private m_bApplySawingTilted As Boolean = False
    Private m_sCurrDrilling As String = String.Empty
    Private m_sCurrMilling As String = String.Empty
    Private m_sCurrPocketing As String = String.Empty
@@ -132,6 +135,7 @@ Public Class CurrentMachine
    Private m_dAdditionalTable As Double = 0
    Private m_dTab2AdditionalTable As Double = 0
    Private m_dTab3AdditionalTable As Double = 0
+   Private m_dTab4AdditionalTable As Double = 0
    Private m_bCenterRawOnX As Boolean = False
 
    ' Offset aggiuntivi per fotografia
@@ -139,6 +143,8 @@ Public Class CurrentMachine
    Private m_dPhotoOffsetY As Double = 0
    Private m_dTab2PhotoOffsetX As Double = 0
    Private m_dTab2PhotoOffsetY As Double = 0
+   Private m_dHQPhotoOffsetX As Double = 0
+   Private m_dHQPhotoOffsetY As Double = 0
 
    ' Abilitazione scelta restart
    Private m_bEnableRestart As Boolean = False
@@ -191,6 +197,7 @@ Public Class CurrentMachine
       SAWANDAUXTOOL = 1
       MANUALTOOLCHANGER = 2
       TOOLCHANGER = 3
+      TOOLCHANGERWITHSAW = 4
    End Enum
 
    ' Massimo numero di utensili su Tc
@@ -199,8 +206,24 @@ Public Class CurrentMachine
    ' Massimo numero di utensili su Tc manuale
    Friend MAX_TCMAN_TOOLS As Integer = 60
 
+   ' Massima profondità lavorabile nei tagli diretti
+   Private m_MaxTabDepth As Double = 10.0
+
+   ' Massima altezza lavorabile con lama grande
+   Private m_dHighPieceZ As Double = 200.0
+
+   ' 
+   Private m_dFinalDepth As Double = 0.0
+
+   ' Flag che abilita l'esecuzione del taglio finale
+   Private m_bEnableFinalSawCut As Boolean = False
 
 #Region "Proprietà che leggono e scrivono i valori anche da o su file ini"
+   Friend ReadOnly Property MaxTabDepth As Double
+      Get
+         Return m_MaxTabDepth
+      End Get
+   End Property
 
    Friend ReadOnly Property sMachineName As String
       Get
@@ -561,6 +584,18 @@ Public Class CurrentMachine
       End Set
    End Property
 
+   Friend Property sCurrSawTilted As String
+      Get
+         Return m_sCurrSawTilted
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, value, sMachIniFile) Then
+            m_sCurrSawTilted = value
+            ' m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text = value
+         End If
+      End Set
+   End Property
+
    Friend Property sCurrDrill As String
       Get
          Return m_sCurrDrill
@@ -635,18 +670,32 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
-            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
-            'Dim sVal As String = String.Empty
-            'Dim dVal As Double = m_dFsevLength
-            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
-            '   StringToDouble(sVal, dVal)
-            '   SetFsevLength(dVal)
-            'End If
-            'dVal = m_dFsevPerc
-            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
-            '   StringToDouble(sVal, m_dFsevPerc)
-            '   SetFsevPerc(dVal)
-            'End If
+         End If
+      End Set
+   End Property
+
+   Friend Property sCurrSawingTilted As String
+      Get
+         Return m_sCurrSawingTilted
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWINGTILTED, value, sMachIniFile) Then
+            m_sCurrSawingTilted = value
+            'm_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+         End If
+      End Set
+   End Property
+
+   Friend Property bApplySawingTilted As Boolean
+      Get
+         Return m_bApplySawingTilted
+      End Get
+      Set(value As Boolean)
+         m_bApplySawingTilted = value
+         If m_bApplySawingTilted Then
+            WritePrivateProfileString(S_MACH_MACH, K_APPLYSAWINGTILTED, "1", sMachIniFile)
+         Else
+            WritePrivateProfileString(S_MACH_MACH, K_APPLYSAWINGTILTED, "0", sMachIniFile)
          End If
       End Set
    End Property
@@ -757,6 +806,10 @@ Public Class CurrentMachine
       Set(value As String)
          If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, value, sMachIniFile) Then
             m_sCurrWaterJetting = value
+            If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+               m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            End If
+
          End If
       End Set
    End Property
@@ -787,10 +840,12 @@ Public Class CurrentMachine
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
-            Case 3
-               Return m_dTab3AdditionalTable
             Case 2
                Return m_dTab2AdditionalTable
+            Case 3
+               Return m_dTab3AdditionalTable
+            Case 4
+               Return m_dTab4AdditionalTable
             Case Else
                Return m_dAdditionalTable
          End Select
@@ -798,6 +853,19 @@ Public Class CurrentMachine
       Set(value As Double)
          Dim dValue As Double = 0
          Select Case GetCurrentTable()
+            Case 4
+               If Math.Abs(value - m_dTab4AdditionalTable) > EPS_SMALL And
+               WritePrivateProfileString(S_TABLE, K_TAB4_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
+                  ' Aggiorno il valore corrente
+                  m_dTab4AdditionalTable = value
+                  ' Aggiorno il progetto corrente
+                  m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
+               End If
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB3_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
@@ -853,6 +921,10 @@ Public Class CurrentMachine
             Case 2
                Return New Vector3d(m_dTab2PhotoOffsetX, m_dTab2PhotoOffsetY, 0)
             Case Else
+               ' verifico quale delle due fotocamere è attualmente attiva
+               If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+                  Return New Vector3d(m_dHQPhotoOffsetX, m_dHQPhotoOffsetY, 0)
+               End If
                Return New Vector3d(m_dPhotoOffsetX, m_dPhotoOffsetY, 0)
          End Select
       End Get
@@ -1132,6 +1204,30 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property dHighPieceZ As Double
+      Get
+         Return m_dHighPieceZ
+      End Get
+   End Property
+
+   Friend Property bEnableFinalSawCut As Boolean
+      Get
+         Return m_bEnableFinalSawCut
+      End Get
+      Set(value As Boolean)
+         m_bEnableFinalSawCut = value
+      End Set
+   End Property
+
+   Friend Property dFinalDepth As Double
+      Get
+         Return m_dFinalDepth
+      End Get
+      Set(value As Double)
+         m_dFinalDepth = value
+      End Set
+   End Property
+
 #End Region
 
    Sub New()
@@ -1247,6 +1343,14 @@ Public Class CurrentMachine
       ' Leggo utensili correnti
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAW, Nothing, m_sCurrSaw, sMachIniFile)
+      ' lama inclinata
+      If m_MountedToolConfig = 4 Then
+         GetPrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, Nothing, m_sCurrSawTilted, sMachIniFile)
+      Else
+         ' se non è configurato il cambio utensile e allora imposto l'unica lama disponibile per i tagli inclinati
+         m_sCurrSawTilted = m_sCurrSaw
+      End If
+
       ' foretto
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRILL, Nothing, m_sCurrDrill, sMachIniFile)
       ' fresa
@@ -1263,6 +1367,10 @@ Public Class CurrentMachine
       ' Leggo lavorazioni correnti
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, m_sCurrSawing, sMachIniFile)
+      ' lama inlicnata
+      GetPrivateProfileString(S_MACH_MACH, K_CURRSAWINGTILTED, Nothing, m_sCurrSawingTilted, sMachIniFile)
+      ' applica lavorazione di lama inclinata
+      m_bApplySawingTilted = (GetPrivateProfileInt(S_MACH_MACH, K_APPLYSAWINGTILTED, 0, sMachIniFile) <> 0)
       ' foretto
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRILLING, Nothing, m_sCurrDrilling, sMachIniFile)
       ' fresa
@@ -1316,6 +1424,7 @@ Public Class CurrentMachine
       m_dAdditionalTable = GetPrivateProfileDouble(S_TABLE, K_ADDITIONALTABLE, 0, sMachIniFile)
       m_dTab2AdditionalTable = GetPrivateProfileDouble(S_TABLE, K_TAB2_ADDITIONALTABLE, 0, sMachIniFile)
       m_dTab3AdditionalTable = GetPrivateProfileDouble(S_TABLE, K_TAB3_ADDITIONALTABLE, 0, sMachIniFile)
+      m_dTab4AdditionalTable = GetPrivateProfileDouble(S_TABLE, K_TAB4_ADDITIONALTABLE, 0, sMachIniFile)
 
       ' Leggo centratura del pezzo in X sulla tavola (per macchine con nastro)
       m_bCenterRawOnX = (GetPrivateProfileInt(S_TABLE, K_CENTER_RAW_ONX, 0, sMachIniFile) <> 0)
@@ -1325,6 +1434,8 @@ Public Class CurrentMachine
       m_dPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_OFFSETY, 0, sMachIniFile)
       m_dTab2PhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETX, 0, sMachIniFile)
       m_dTab2PhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETY, 0, sMachIniFile)
+      m_dHQPhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETX, 0, sMachIniFile)
+      m_dHQPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETY, 0, sMachIniFile)
 
       ' Leggo abilitazione per restart
       m_bEnableRestart = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENABLERESTART, 0, sMachIniFile) <> 0)
@@ -1392,6 +1503,21 @@ Public Class CurrentMachine
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
+
+      ' affonadamento massimo oltre la tavola (inidicata in positivo!)
+      m_MaxTabDepth = GetPrivateProfileDouble(S_MACH_NEST, "MaxTabDepth", 10.0, m_MainWindow.GetMachIniFile())
+      If m_MaxTabDepth < 0 Then
+         m_MaxTabDepth = 10.0
+      End If
+
+      ' Massimo spessore lavorabile con lama grande
+      m_dHighPieceZ = GetPrivateProfileDouble(S_RAWMOVE, "MaxHeightPiece", 800.0, m_MainWindow.GetMachIniFile())
+
+      ' Flag per abilitare taglio finale
+      m_bEnableFinalSawCut = GetPrivateProfileInt(S_MACH, K_ENABLEFINALSAWCUT, 0, m_MainWindow.GetMachIniFile()) <> 0
+
+      ' Flag per abilitare taglio finale
+      m_dFinalDepth = GetPrivateProfileDouble(S_MACH, K_FINALDEPTH, 0.0, m_MainWindow.GetMachIniFile())
    End Sub
 
    ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
@@ -1637,7 +1763,9 @@ Public Class CurrentMachine
       Dim dToolDiam As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam)
       ' Confronto con massimo ammesso
-      Return (dToolDiam <= dMaxSawDiamForProbe)
+      Dim bOk As Boolean = dToolDiam <= dMaxSawDiamForProbe
+      If Not bOk Then EgtOutLog("WARNING: Saw diameter to big for probing")
+      Return bOk
    End Function
 
    Friend Function GetPrivateProfileMaterial(

Machine/MachineCNPageUC.xaml.vb

@@ -41,14 +41,15 @@ Public Class MachineCNPageUC
       If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
          PowerONBtn.Content = "ON"
          PowerOFFBtn.Content = "OFF"
-         PowerGpBx.Header = "Power"
+         PowerGpBx.Header = EgtMsg(90974)    'Power
       Else
          PowerGpBx.Visibility = Visibility.Collapsed
       End If
 
       ' verifico che sia attiva la modalità per l'uso di due fotocamere
       If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
-         CameraHQ.Header = "Photo on table"
+         CameraHQ.Visibility = Visibility.Visible
+         CameraHQ.Header = EgtMsg(90975)     'Photo on table
          CameraHQBtn.Content = "HQ"
          ' verifico quale camera è impostata
          If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
@@ -176,7 +177,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Start_Cycle"
+         sDBVarPath &= EgtMsg(90976)                                     ' Start_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")     ' Modalità manuale
       Else
          m_CN.DGeneralFunctions_CycleStart()
@@ -187,7 +188,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Stop_Cycle"
+         sDBVarPath &= EgtMsg(90977)                                     ' Stop_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 0, 0, 0, "")     ' Modalità manuale
       Else
          m_CN.DGeneralFunctions_FeedHold()
@@ -198,7 +199,7 @@ Public Class MachineCNPageUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
          GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", sDBVarPath, m_MainWindow.GetMachIniFile)
-         sDBVarPath &= "Reset_Cycle"
+         sDBVarPath &= EgtMsg(90978)                                     ' Reset_Cycle
          m_CN.DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")     ' Modalità manuale
       Else
          Call m_CN.DGeneralFunctions_Reset()
@@ -227,7 +228,7 @@ Public Class MachineCNPageUC
 
    Private Sub CameraHQBtn_Click(sender As Object, e As RoutedEventArgs) Handles CameraHQBtn.Click
       Dim sEnableHQ As String = If(CameraHQBtn.IsChecked, "1", "0")
-      WritePrivateProfileString(S_CAMERAHQ, K_CAMERAHQ_ENABLE, sEnableHQ, m_MainWindow.GetMachIniFile())
+      WritePrivateProfileString(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, sEnableHQ, m_MainWindow.GetMachIniFile())
       If CameraHQBtn.IsChecked Then
          If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
             m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1HQ.png", UriKind.Relative))

Machine/MachinePageUC.xaml

@@ -5,16 +5,16 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
-      
+
    <!-- Definizione della MachinePage -->
    <Border  >
-      
+
       <Grid Name="MachinePageGrid" >
          <Grid.RowDefinitions>
-             <RowDefinition Height="1*"/>
-             <RowDefinition Height="9*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="9*"/>
          </Grid.RowDefinitions>
-         
+
          <!-- Definizione della grid superiore -->
          <Grid Name="UpperButtonGrid" Grid.Row="0" >
             <Grid.ColumnDefinitions>
@@ -25,37 +25,40 @@
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.1*"/>
             </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
-                <ToggleButton Name="ToolsDBBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource DB-lavorazioniImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
-                <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource DB-utensiliImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
-                <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
-                    <!--<Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
-                </ToggleButton>
-                <ToggleButton Name="WaterJetBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
-                    <!--<Image Source="{DynamicResource WaterJetImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
-                </ToggleButton>
-                <ToggleButton Name="TestingPageBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource MacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
-                <ToggleButton Name="StatisticsBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowToggleButton}">
-                    
-                </ToggleButton>
+            <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="Alarms2Btn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="ToolsDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource DB-lavorazioniImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="MachiningDBBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource DB-utensiliImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="PolishingsBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+               <!--<Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+            </ToggleButton>
+            <ToggleButton Name="WaterJetBtn" Grid.Column="5" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+               <!--<Image Source="{DynamicResource WaterJetImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+            </ToggleButton>
+            <ToggleButton Name="TestingPageBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource MacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="StatisticsBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowToggleButton}">
 
-            </Grid>
+            </ToggleButton>
+
+         </Grid>
 
       </Grid>
-      
+
    </Border>
-   
+
 </UserControl>

Machine/MachinePageUC.xaml.vb

@@ -13,6 +13,7 @@ Public Class MachinePageUC
    Friend m_WaterJetPageUC As WaterJetPageUC
    Friend m_MachineCNPageUC As MachineCNPageUC
    Friend m_StatisticsPageUC As StatisticsPageUC
+   Friend m_Alarms2PageUC As Alarms2PageUC
 
    ' Riferimento alla pagina correntemente attiva
    Friend m_ActiveMachinePage As MachinePages
@@ -25,6 +26,7 @@ Public Class MachinePageUC
       WaterJet
       MachineCN
       Statistics
+      Alarms2
    End Enum
 
    Private Sub MachinePage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
@@ -37,6 +39,7 @@ Public Class MachinePageUC
       m_WaterJetPageUC = New WaterJetPageUC
       m_MachineCNPageUC = New MachineCNPageUC
       m_StatisticsPageUC = New StatisticsPageUC
+      m_Alarms2PageUC = New Alarms2PageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_AlarmsPageUC.SetValue(Grid.RowProperty, 1)
@@ -46,8 +49,11 @@ Public Class MachinePageUC
       m_WaterJetPageUC.SetValue(Grid.RowProperty, 1)
       m_MachineCNPageUC.SetValue(Grid.RowProperty, 1)
       m_StatisticsPageUC.SetValue(Grid.RowProperty, 1)
+      m_Alarms2PageUC.SetValue(Grid.RowProperty, 1)
 
       AlarmsBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 5)
+      Alarms2Btn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 5)
+
       ToolsDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 6)
       MachiningDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 7)
       PolishingsBtn.Content = EgtMsg(91090)
@@ -171,6 +177,95 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
+      End Select
+   End Sub
+
+   Private Sub Alarms2Btn_Click(sender As Object, e As RoutedEventArgs) Handles Alarms2Btn.Click
+      Select Case m_ActiveMachinePage
+         Case MachinePages.Alarms
+            AlarmsBtn.IsChecked = False
+            Alarms2Btn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_AlarmsPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.ToolsDb
+            ' Verifica ed eventuale salvataggio utensile corrente
+            If Not m_ToolsDbPageUC.SaveCurrTool() Then
+               Alarms2Btn.IsChecked = False
+               ToolsDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB utensili
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtTdbSave()
+            ' passo alla pagina Dati macchina
+            Alarms2Btn.IsChecked = True
+            ToolsDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_ToolsDbPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.MachiningDb
+            ' Verifica ed eventuale salvataggio lavorazione corrente
+            If Not m_MachiningDbPageUC.SaveCurrMachining() Then
+               Alarms2Btn.IsChecked = False
+               MachiningDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB lavorazioni
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtMdbSave()
+            ' passo alla pagina Dati macchina
+            Alarms2Btn.IsChecked = True
+            MachiningDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachiningDbPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.Polishings
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            If Not m_PolishingsPageUC.SaveKit() Then
+               Alarms2Btn.IsChecked = False
+               PolishingsBtn.IsChecked = True
+               Return
+            End If
+            ' passo alla pagina Dati Macchina
+            Alarms2Btn.IsChecked = True
+            PolishingsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_PolishingsPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               Alarms2Btn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            Alarms2Btn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.MachineCN
+            Alarms2Btn.IsChecked = True
+            TestingPageBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
+         Case MachinePages.Statistics
+            Alarms2Btn.IsChecked = True
+            StatisticsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_StatisticsPageUC)
+            MachinePageGrid.Children.Add(m_Alarms2PageUC)
+            m_ActiveMachinePage = MachinePages.Alarms2
       End Select
    End Sub
 
@@ -241,6 +336,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_ToolsDbPageUC)
             m_ActiveMachinePage = MachinePages.ToolsDb
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            ToolsDBBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_ToolsDbPageUC)
+            m_ActiveMachinePage = MachinePages.ToolsDb
       End Select
    End Sub
 
@@ -298,6 +399,8 @@ Public Class MachinePageUC
             WaterJetBtn.IsChecked = False
             MachinePageGrid.Children.Remove(m_WaterJetPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            ' Aggiorno lista materiali
+            m_MainWindow.m_CurrentMachine.LoadWJMaterial()
             m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True
@@ -311,6 +414,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
             m_ActiveMachinePage = MachinePages.MachiningDb
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            MachiningDBBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            m_ActiveMachinePage = MachinePages.MachiningDb
       End Select
    End Sub
 
@@ -384,6 +493,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_PolishingsPageUC)
             m_ActiveMachinePage = MachinePages.Polishings
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            PolishingsBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_PolishingsPageUC)
+            m_ActiveMachinePage = MachinePages.Polishings
       End Select
    End Sub
 
@@ -455,6 +570,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_WaterJetPageUC)
             m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            WaterJetBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
       End Select
    End Sub
 
@@ -535,6 +656,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_MachineCNPageUC)
             m_ActiveMachinePage = MachinePages.MachineCN
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            TestingPageBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_MachineCNPageUC)
+            m_ActiveMachinePage = MachinePages.MachineCN
       End Select
    End Sub
 
@@ -615,6 +742,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.Statistics
             StatisticsBtn.IsChecked = True
+         Case MachinePages.Alarms2
+            Alarms2Btn.IsChecked = False
+            StatisticsBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_StatisticsPageUC)
+            m_ActiveMachinePage = MachinePages.Statistics
       End Select
    End Sub
 
@@ -668,6 +801,12 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_StatisticsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.Alarms2
+            AlarmsBtn.IsChecked = True
+            Alarms2Btn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_Alarms2PageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
       End Select
    End Sub
 

Machine/MachineStatusUC.xaml.vb

@@ -279,12 +279,16 @@ Public Class MachineStatusUC
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
-      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
-      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
-         dRealFeed = m_CN.d_DInterpo_Prog_Feed
-      Else
-         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
-      End If
+      '' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta (lettura feed per CN Fanuc)
+      'If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+      '   dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      'Else
+      '   dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      'End If
+
+      ' modifica richiesta 24/03/2025 da Fabio per cliente Frigerio
+      dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+
       'Feed = DoubleToString(dRealFeed, 0)
       FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
@@ -308,8 +312,16 @@ Public Class MachineStatusUC
       Dim dSpindleOvr As Double
       ' se attivi nuovi comandi MDI su siemens
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
-         dSpindlePower = m_CN.d_data(0)
-         dSpindleOvr = m_CN.d_data(1)
+
+         If m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
+            dSpindlePower = m_CN.d_spindle_power
+            'dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)
+            dSpindleOvr = m_CN.bPowerOvr
+         Else
+            ' questo sistema è deprecabile dalla versione 2.6d2 (nuova gestione dei vettori)
+            dSpindlePower = m_CN.d_data(0)
+            dSpindleOvr = m_CN.d_data(1)
+         End If
       ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
          dSpindlePower = m_CN.d_spindle_power / 1000
       Else

Machine/MachiningDbPageUC.xaml.vb

@@ -61,7 +61,7 @@ Public Class MachiningDbPageUC
       StepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39), EgtMsg(MSG_COMBOBOXPARAM + 40)}
       RouFinStepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39)}
       ExtCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(MSG_COMBOBOXPARAM + 45)}
-      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44)}
+      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(90852)}
 
       ' Assegno array a combobox
       WorkSideCmBx.ItemsSource = WorkSide
@@ -79,8 +79,8 @@ Public Class MachiningDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 16)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
-      ExportBtn.Content = "Export"
-      ImportBtn.Content = "Import"
+      ExportBtn.Content = EgtMsg(91126)    ' Export
+      ImportBtn.Content = EgtMsg(91127)    ' Import
 
       NameTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 1)
       DepthTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 2)
@@ -208,7 +208,7 @@ Public Class MachiningDbPageUC
       MillTool.Clear()
       bFound = EgtTdbGetFirstTool(MCH_TF.MILL, sToolName, nType)
       While bFound
-         If nType = MCH_TY.MILL_STD Then MillTool.Add( sToolName)
+         If nType = MCH_TY.MILL_STD And sToolName.Trim.ToLower <> "probe" Then MillTool.Add(sToolName)
          bFound = EgtTdbGetNextTool(MCH_TF.MILL, sToolName, nType)
       End While
       PocketTool.Clear()

Machine/SetUpPage.xaml.vb

@@ -3,6 +3,8 @@ Imports System.ComponentModel
 Imports OmagCUT.TreeViewItem
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
+Imports FXServer
 
 Public Class SetUpPage
 
@@ -13,6 +15,7 @@ Public Class SetUpPage
    Private m_CurrMachine As CurrentMachine = m_MainWindow.m_CurrentMachine
 
    Private m_ToolTreeList As New ObservableCollection(Of CathegoryItem)
+   Private m_SawsList As CathegoryItem
    Private m_DrillbitsList As CathegoryItem
    Private m_MillsList As CathegoryItem
    Private m_CupsList As CathegoryItem
@@ -26,10 +29,10 @@ Public Class SetUpPage
       ' Assegno la lista utensili come sorgente dell'albero
       ToolTree.ItemsSource = m_ToolTreeList
 
-      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
          '' Cambio utensile macchina
          ' Modifico numero colonne della griglia in base al numero di porta utensili disponibili sulla macchina
-         Dim ColNum As Integer = CInt( Math.Ceiling( m_CurrMachine.ToolChangerNbr / 5.0))
+         Dim ColNum As Integer = CInt(Math.Ceiling(m_CurrMachine.ToolChangerNbr / 5.0))
          If ColNum > 12 Then
             EgtOutLog("TC warning : too many tools (max 12 * 5)")
             ColNum = 12
@@ -59,11 +62,11 @@ Public Class SetUpPage
 
       '' Cambio utensile manuale
       ' Modifico numero colonne della griglia in base al numero di porta utensili disponibili sulla macchina
-      Dim ManColNum As Integer = CInt( Math.Ceiling( m_CurrMachine.ManualToolChangerNbr / 5.0))
-         If ManColNum > 12 Then
-            EgtOutLog("ManTC warning : too many tools (max 12 * 5)")
-            ManColNum = 12
-         End If
+      Dim ManColNum As Integer = CInt(Math.Ceiling(m_CurrMachine.ManualToolChangerNbr / 5.0))
+      If ManColNum > 12 Then
+         EgtOutLog("ManTC warning : too many tools (max 12 * 5)")
+         ManColNum = 12
+      End If
       For Index As Integer = 12 To ManColNum + 1 Step -1
          For Index2 As Integer = Index * 5 To (Index - 1) * 5 + 1 Step -1
             ManTlChGrid.Children.Remove(GetManTlChPosFromIndex(Index2))
@@ -85,7 +88,7 @@ Public Class SetUpPage
       Next
 
       ' Se portautensili della macchina presente
-      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
          ' Apro quello
          TlChScVw.Visibility = Windows.Visibility.Visible
          ToolChangerBtn.IsChecked = True
@@ -106,15 +109,25 @@ Public Class SetUpPage
    Private Sub SetUpPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Inizializzo le famiglie di utensili nell'albero
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      InitializeToolGroup( m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg( 90752), m_DrillbitsList)
-      InitializeToolGroup( m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg( 90753), m_MillsList)
-      InitializeToolGroup( m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg( 90754), m_CupsList)
-      InitializeToolGroup( m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg( 90756), m_PolishingsList)
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg(90751), m_SawsList)
+      InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg(90752), m_DrillbitsList)
+      InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg(90753), m_MillsList)
+      InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg(90754), m_CupsList)
+      InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg(90756), m_PolishingsList)
 
       ' Posiziono utensili già posizionati sul portautensili
       For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
          If ToolPosition.sTool <> String.Empty Then
-            If Not IsNothing( m_DrillbitsList) Then
+            If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW AndAlso Not IsNothing(m_SawsList) Then
+               For Each Item As CustomItem In m_SawsList.Items
+                  If Item.Name = ToolPosition.sTool Then
+                     m_SetUpToolsList.Items.Add(Item)
+                     m_SawsList.Items.Remove(Item)
+                     Exit For
+                  End If
+               Next
+            End If
+            If Not IsNothing(m_DrillbitsList) Then
                For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -123,7 +136,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_MillsList) Then
+            If Not IsNothing(m_MillsList) Then
                For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -132,7 +145,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_CupsList) Then
+            If Not IsNothing(m_CupsList) Then
                For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -141,7 +154,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_PolishingsList) Then
+            If Not IsNothing(m_PolishingsList) Then
                For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -158,7 +171,7 @@ Public Class SetUpPage
       ' Posiziono utensili già posizionati sul portautensili manuale
       For Each ToolPosition As ToolChangerPos In m_CurrMachine.ManualToolChanger
          If ToolPosition.sTool <> String.Empty Then
-            If Not IsNothing( m_DrillbitsList) Then
+            If Not IsNothing(m_DrillbitsList) Then
                For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -167,7 +180,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_MillsList) Then
+            If Not IsNothing(m_MillsList) Then
                For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -176,7 +189,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_CupsList) Then
+            If Not IsNothing(m_CupsList) Then
                For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -185,7 +198,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_PolishingsList) Then
+            If Not IsNothing(m_PolishingsList) Then
                For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -710,16 +723,16 @@ Public Class SetUpPage
    End Function
 
    ' Funzione che carica gli utensili del Db nell'albero
-   Friend Sub InitializeToolGroup( bEnabled As Boolean, nTType As Integer, sFName As String, ByRef ToolCathegory As CathegoryItem)
+   Friend Sub InitializeToolGroup(bEnabled As Boolean, nTType As Integer, sFName As String, ByRef ToolCathegory As CathegoryItem)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
-      ToolCathegory = New CathegoryItem( sFName, nTType)
+      ToolCathegory = New CathegoryItem(sFName, nTType)
       Dim nType As Integer = 0
       Dim ToolName As String = String.Empty
-      Dim bFound As Boolean = EgtTdbGetFirstTool( nTType, ToolName, nType)
+      Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add( New CustomItem( ToolName, nType))
-         bFound = EgtTdbGetNextTool( nTType, ToolName, nType)
+         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
       m_ToolTreeList.Add(ToolCathegory)
    End Sub
@@ -761,7 +774,7 @@ Public Class SetUpPage
             ToolHolderClicked.Tool.IsChecked = False
             GetTxBxFromTlChPos(ToolHolderClicked.Name).Text = String.Empty
          End If
-      ' altrimenti da levare
+         ' altrimenti da levare
       Else
          RestoreToolInList(GetTxBxFromTlChPos(ToolHolderClicked.Name).Text)
          GetTxBxFromTlChPos(ToolHolderClicked.Name).Text = String.Empty
@@ -771,14 +784,17 @@ Public Class SetUpPage
 
    ' Funzione che rimuove l'utensile selezionato dall'albero
    Private Sub RemoveToolFromList()
-      If Not IsNothing( m_DrillbitsList) AndAlso m_DrillbitsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_DrillbitsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_MillsList) AndAlso  m_MillsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_MillsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_CupsList) AndAlso  m_CupsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_CupsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_PolishingsList) AndAlso  m_PolishingsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_PolishingsList.Items.Remove( ToolTree.SelectedItem)
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW AndAlso
+         Not IsNothing(m_SawsList) AndAlso m_SawsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_SawsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_DrillbitsList) AndAlso m_DrillbitsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_DrillbitsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_MillsList) AndAlso m_MillsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_MillsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_CupsList) AndAlso m_CupsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_CupsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_PolishingsList) AndAlso m_PolishingsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_PolishingsList.Items.Remove(ToolTree.SelectedItem)
       End If
    End Sub
 
@@ -786,7 +802,9 @@ Public Class SetUpPage
    Private Sub RestoreToolInList(sToolName As String)
       For Each Tool As CustomItem In m_SetUpToolsList.Items
          If Tool.Name = sToolName Then
-            If Tool.nType = MCH_TY.DRILL_STD Then
+            If Tool.nType = MCH_TY.SAW_STD Then
+               m_SawsList.Items.Add(Tool)
+            ElseIf Tool.nType = MCH_TY.DRILL_STD Then
                m_DrillbitsList.Items.Add(Tool)
             ElseIf Tool.nType = MCH_TY.MILL_STD Then
                m_MillsList.Items.Add(Tool)
@@ -1084,6 +1102,39 @@ Public Class SetUpPage
       EgtTdbSave()
    End Sub
 
+   ' Funzione che genera il file di setup corrente (per Cam5 e Office)
+   Private Sub SaveSetUpFile()
+      If m_CurrMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then Return
+      Dim sContentFile As String = EgtMsg(91239) & vbCrLf     ' ; this file has been created by program OmagCUT by current setup
+      sContentFile &= EgtMsg(91240) & vbCrLf                  ' [General]
+      For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
+         Dim sToolName As String = ToolPosition.sTool
+         Dim sPositionName As String = ToolPosition.sName
+         Dim sPosition As Integer = ToolPosition.nPosition
+         If Not String.IsNullOrEmpty(sToolName) Then
+            EgtTdbSetCurrTool(sToolName)
+            ' Recupero l'uscita
+            Dim nExit As Integer = 1
+            EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExit)
+            ' Recupero la testa
+            Dim sHead As String = ""
+            EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHead)
+            ' Recupero nome file nge dell'utensile
+            Dim sUUID As String = ""
+            EgtTdbGetCurrToolParam(MCH_TP.UUID, sUUID)
+            'local sRaw='Pos'..tostring(Index)..'='..TcPos..';'..EgtTdbGetCurrToolParam( MCH_TP.HEAD)..';'..EgtTdbGetCurrToolParam( MCH_TP.EXIT)..'/'..EgtTdbGetCurrToolParam( MCH_TP.UUID)..'/'..ToolName
+            sContentFile &= "Pos" & sPosition.ToString & "=" & sPositionName & ";" & sHead & ";" & nExit.ToString & "/" & sUUID & "/" & sToolName & vbCrLf
+         End If
+      Next
+      ' Apro il file e lo sovrascrivo
+      Dim sFileOmagCutSetUp As String = m_CurrMachine.sMachDir & "\SetUp\CurrOmagCUT.stu"
+      Try
+         My.Computer.FileSystem.WriteAllText(sFileOmagCutSetUp, sContentFile, False)
+      Catch ex As Exception
+         EgtOutLog("Error in creatinf file CurrOmagCUT.stu: " & ex.ToString)
+      End Try
+   End Sub
+
    ' Evento che permette di aprire le cartelle degli utensili con un click singolo
    Private Sub ToolTree_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ToolTree.PreviewMouseUp
       If TypeOf ToolTree.SelectedItem Is CathegoryItem Then
@@ -1095,6 +1146,8 @@ Public Class SetUpPage
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       ' Eseguo salvataggio (DB utensili + attrezzaggio)
       SaveToolChangerStatus()
+      ' Salvo nel file di setup l'attuale configurazione
+      SaveSetUpFile()
       ' Esco
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Add(m_MainWindow.m_MachinePageUC.m_AlarmsPageUC)
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Remove(Me)
@@ -1131,7 +1184,7 @@ Public Class SetUpPage
                   RemoveToolFromList()
                Else
                   ' Altrimenti segnalo che la posizione è già occupata
-                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg( 90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
+                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg(90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
                End If
                Return
             End If
@@ -1149,7 +1202,7 @@ Public Class SetUpPage
                   RemoveToolFromList()
                Else
                   ' Altrimenti segnalo che la posizione è già occupata
-                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg( 90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
+                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg(90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
                End If
                Return
             End If

Machine/ToolChangerPosUC.xaml

@@ -18,7 +18,7 @@
                </Grid>
                <ControlTemplate.Triggers>
                   <Trigger Property="IsChecked" Value="True">
-                     <Setter Property="Fill" TargetName="Ellipse" Value="#FFB4B4B4"/>
+                     <Setter Property="Fill" TargetName="Ellipse" Value="#414141"/>
                   </Trigger>
                </ControlTemplate.Triggers>
             </ControlTemplate>

Machine/ToolsDbPageUC.xaml

@@ -1,12 +1,12 @@
 <UserControl x:Class="ToolsDbPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="1280" Initialized="ToolsDbPage_Initialized" Loaded="ToolsDbPage_Loaded">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+             xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="1280" Initialized="ToolsDbPage_Initialized" Loaded="ToolsDbPage_Loaded">
 
    <!-- Definizione della ImportPage -->
    <Border Style="{DynamicResource OmagCut_PageBorder}">
@@ -24,7 +24,7 @@
 
          <TreeView Name="ToolTreeView" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}" >
             <TreeView.Resources>
-                    <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
+               <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
                <HierarchicalDataTemplate DataType="{x:Type self:CathegoryItem}" ItemsSource="{Binding Items}">
 
@@ -224,12 +224,12 @@
             </Grid.RowDefinitions>
 
             <TextBlock Name="NameTxBl" Grid.Column="0" Grid.Row="0" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
             <EgtWPFLib:EgtTextBox Name="NameTxBx" Grid.Column="1" Grid.Row="0" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                                  Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
 
             <Border Name="TCPosBrd" Grid.Column="2" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3"
-               BorderThickness="0" BorderBrush="Black" CornerRadius="3">
+                    BorderThickness="0" BorderBrush="Black" CornerRadius="3">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -237,17 +237,27 @@
                      <ColumnDefinition Width="2*"/>
                   </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="TCPosTxBl" Grid.Column="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                  <TextBlock Name="TCPosTxBl" Grid.Column="0">
+                     <TextBlock.Style>
+                        <Style TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
+                           <Setter Property="Margin" Value="10,0,0,0"/>
+                           <Style.Triggers>
+                              <Trigger Property="ToolTip" Value="">
+                                 <Setter Property="ToolTipService.IsEnabled" Value="False" />
+                              </Trigger>
+                           </Style.Triggers>
+                        </Style>
+                     </TextBlock.Style>
+                  </TextBlock>
                   <EgtWPFLib:EgtTextBox Name="TCPosTxBx" Grid.Column="1" Grid.Row="0" Margin="0,0,15,0"
-                     Style="{DynamicResource OmagCut_KeyboardTextBox}" />
+                                        Style="{DynamicResource OmagCut_KeyboardTextBox}" />
 
                </Grid>
 
             </Border>
 
             <Border Name="HeadExitBrd" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="4" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_NoNameGroupBorder}">
+                    Style="{DynamicResource OmagCut_NoNameGroupBorder}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -259,18 +269,18 @@
 
                   <TextBlock Name="HeadTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="HeadTxBx" Grid.Column="1"
-                     Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
+                                        Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
                   <TextBlock Name="ExitTxBl" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="ExitTxBx" Grid.Column="3"
-                     Style="{DynamicResource OmagCut_RightCalculatorTextBoxInBorder}" />
+                                        Style="{DynamicResource OmagCut_RightCalculatorTextBoxInBorder}" />
 
                </Grid>
 
             </Border>
 
             <GroupBox Name="SpeedGpBx" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="4" Grid.RowSpan="4"
-               Style="{DynamicResource OmagCut_GroupBox}">
+                      Style="{DynamicResource OmagCut_GroupBox}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -282,19 +292,19 @@
 
                   <TextBlock Name="SpeedTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="MaxSpeedTxBl" Grid.Column="2"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3" IsLength="False"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
 
             </GroupBox>
 
             <GroupBox Name="FeedGpBx" Grid.Column="0" Grid.Row="10" Grid.ColumnSpan="4" Grid.RowSpan="6"
-               Style="{DynamicResource OmagCut_GroupBox}">
+                      Style="{DynamicResource OmagCut_GroupBox}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -309,23 +319,23 @@
                   </Grid.RowDefinitions>
 
                   <TextBlock Name="FeedTxBl" Grid.Column="0" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="FeedTxBx" Grid.Column="1" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="TipFeedTxBl" Grid.Column="2" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="TipFeedTxBx" Grid.Column="3" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="StartFeedTxBl" Grid.Column="0" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="StartFeedTxBx" Grid.Column="1" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
                   <TextBlock Name="EndFeedTxBl" Grid.Column="2" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="EndFeedTxBx" Grid.Column="3" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
 
@@ -336,7 +346,7 @@
             <ComboBox Name="CoolantCmBx" Grid.Column="1" Grid.Row="16" Grid.RowSpan="3" Style="{StaticResource OmagCut_LeftComboBoxNoBorder}">
                <ComboBox.ItemTemplate>
                   <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                   </DataTemplate>
                </ComboBox.ItemTemplate>
             </ComboBox>
@@ -420,11 +430,32 @@
             <CheckBox Name="EndLifeChBx" Grid.Column="3" Grid.Row="31" Grid.RowSpan="3"
                 Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,8,0,0"/>
 
-            <TextBlock Name="UserNotesTxBl" Grid.Column="0" Grid.Row="33" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="UserNotesTxBx" Grid.Column="1" Grid.Row="33"
-               Grid.RowSpan="3"  Grid.ColumnSpan="3" Margin="0,0,15,0" 
-               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <Grid Grid.Column="0" Grid.Row="33" Grid.RowSpan="3" Grid.ColumnSpan="4">
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="Auto"/>
+               </Grid.ColumnDefinitions>
+                    <StackPanel Orientation="Horizontal" HorizontalAlignment="Left">
+                  <TextBlock Name="UserNotesTxBl"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                  <EgtWPFLib:EgtTextBox Name="UserNotesTxBx"
+                                        Grid.RowSpan="3"  Grid.ColumnSpan="3" Margin="0,0,15,0" 
+                                        Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+               </StackPanel>
+               <StackPanel Grid.Column="1" Orientation="Horizontal" HorizontalAlignment="Right" Margin="0,0,12,0">
+                  <TextBlock Name="ColorTxBl" Margin="0,0,15,0"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+
+                  <Button Name="ColorBtn"
+                          Style="{StaticResource Color_Button}" />
+
+               </StackPanel>
+            </Grid>
+
+
 
          </Grid>
 
@@ -445,7 +476,7 @@
             <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
             <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
 
-            </Grid>
+         </Grid>
 
       </Grid>
 

Machine/ToolsDbPageUC.xaml.vb

@@ -1,6 +1,5 @@
 Imports System.Collections.ObjectModel
 Imports OmagCUT.TreeViewItem
-Imports System.ComponentModel
 Imports EgtUILib
 Imports EgtWPFLib
 Imports EgtWPFLib5
@@ -84,6 +83,7 @@ Public Class ToolsDbPageUC
       CodeTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 27)         ' Code
       SupplierTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 28)     ' Supplier 
       EndLifeTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 29)      ' End Life
+      ColorTxBl.Text = EgtMsg(91018)                         ' Colore lavorazione
 
       ' Associo TextBox e Label
       Dim TempLabel1 As New Label
@@ -122,7 +122,6 @@ Public Class ToolsDbPageUC
       Dim TempLabel12 As New Label
       TempLabel12.Content = MaxMatTxBl.Text
       MaxMatTxBx.Tag = TempLabel12
-
    End Sub
 
    Private Sub ToolsDbPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -568,6 +567,15 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub ColorBtn_Click(sender As Object, e As RoutedEventArgs) Handles ColorBtn.Click
+      ' Il click sul bottone aprirà la finestra ChooseColor che permetterà la scelta del colore
+      m_MainWindow.m_brCurrentColor = ColorBtn.Background
+      Dim ChooseColor As New ChooseColor(m_MainWindow)
+      If ChooseColor.ShowDialog() Then
+         ColorBtn.Background = m_MainWindow.m_brCurrentColor
+      End If
+   End Sub
+
    Private Function AlreadyExist(ToolName As String) As Boolean
       Dim ToolFamily As CathegoryItem
       For Each ToolFamily In ToolsList
@@ -695,7 +703,16 @@ Public Class ToolsDbPageUC
       Dim ToolName As String = String.Empty
       Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         Dim nDebug As Integer = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
+         If nType = nTType Then
+            If nTType <> MCH_TY.MILL_STD Then
+               ' se utensile diverso da MILL
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            ElseIf nTType = MCH_TY.MILL_STD And (ToolName.Trim.ToLower <> "probe" Or nDebug > 4) Then
+               ' Se utensile MILL con nome "probe" aggiungo solo se livello debug maggiore di 4
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            End If
+         End If
          bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
       ToolsList.Add(ToolCathegory)
@@ -757,6 +774,50 @@ Public Class ToolsDbPageUC
          EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, ToolString)
          UserNotesTxBx.Text = ToolString
       End If
+      ' Inizializzo colore di default
+      Dim EgtCol As Color3d = Utility.GetColorPV()
+      ColorBtn.Background = New SolidColorBrush(Color.FromRgb(EgtCol.R, EgtCol.G, EgtCol.B))
+      ' Eventualmente verifico se inserito nel setup
+      VerifyToolInSetUp(m_sToolName, TCPosTxBx.Text)
+   End Sub
+
+   Private Sub VerifyToolInSetUp(sNameTool As String, sTCPos As String)
+      ' Se configurato cambio utensile lama 
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then Return
+      Dim bFound As Boolean = False
+      Dim sCurrTCPos As String = String.Empty
+      For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+         If ToolPosition.sTool <> String.Empty Then
+            If sNameTool = ToolPosition.sTool Then
+               sCurrTCPos = ToolPosition.sName
+               bFound = True
+               Exit For
+            End If
+         End If
+      Next
+
+      If Not bFound Then
+         TCPosTxBl.Foreground = Brushes.Red
+         If String.IsNullOrEmpty(sTCPos) Then
+            TCPosTxBl.ToolTip = EgtMsg(91019)
+         Else
+            TCPosTxBl.ToolTip = EgtMsg(91020)
+         End If
+      Else
+         If String.IsNullOrEmpty(sTCPos) Then
+            TCPosTxBl.Foreground = Brushes.Gold
+            TCPosTxBl.ToolTip = EgtMsg(91021) & " " & sCurrTCPos
+         Else
+            If sTCPos <> sCurrTCPos Then
+               TCPosTxBl.Foreground = Brushes.Gold
+               TCPosTxBl.ToolTip = EgtMsg(91022) & " " & sCurrTCPos
+            Else
+               TCPosTxBl.Foreground = Brushes.White
+               TCPosTxBl.ToolTip = ""
+            End If
+         End If
+      End If
+
    End Sub
 
    Private Sub SetToolParams()
@@ -812,8 +873,40 @@ Public Class ToolsDbPageUC
       If Not SetSpecials() Then
          EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, UserNotesTxBx.Text)
       End If
+      EgtTdbSetCurrToolValInNotes(MCH_TP.SYSNOTES, "COLOR", ColorToString(ColorBtn.Background.ToString()))
    End Sub
 
+   Private Function ColorToString(color As String) As String
+      Dim colorCut As Color = HexToRbgNew(color)
+      Return colorCut.R & "," & colorCut.G & "," & colorCut.B
+   End Function
+
+   Public Function HexToRbgNew(ByVal Hex As String) As Color
+      If Hex.StartsWith("#") Then
+         Hex = Hex.Remove(0, 3)
+      End If
+      Dim red As Byte = CByte(HexadecimalToDecimal(Hex.Substring(0, 2)))
+      Dim green As Byte = CByte(HexadecimalToDecimal(Hex.Substring(2, 2)))
+      Dim blue As Byte = CByte(HexadecimalToDecimal(Hex.Substring(4, 2)))
+      Return Color.FromArgb(255, red, green, blue)
+   End Function
+
+   Private Shared Function HexadecimalToDecimal(hex As String) As Integer
+      hex = hex.ToUpper()
+      Dim hexLength As Integer = hex.Length
+      Dim dec As Double = 0
+      For i As Integer = 0 To hexLength - 1
+         Dim b As Byte = CByte(AscW(hex(i)))
+         If b >= 48 AndAlso b <= 57 Then
+            b -= 48
+         ElseIf b >= 65 AndAlso b <= 70 Then
+            b -= 55
+         End If
+         dec += b * Math.Pow(16, ((hexLength - i) - 1))
+      Next
+      Return CInt(Math.Truncate(dec))
+   End Function
+
    Private Sub ViewToolParams()
       NameTxBl.Visibility = Windows.Visibility.Visible
       NameTxBx.Visibility = Windows.Visibility.Visible
@@ -854,6 +947,9 @@ Public Class ToolsDbPageUC
       SupplierTxBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       EndLifeTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       EndLifeChBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+
+      ColorTxBl.Visibility = If(m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW, Visibility.Visible, Visibility.Hidden)
+      ColorBtn.Visibility = If(m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW, Visibility.Visible, Visibility.Hidden)
    End Sub
 
    Private Sub HideToolParams()
@@ -881,6 +977,9 @@ Public Class ToolsDbPageUC
       SupplierTxBx.Visibility = Windows.Visibility.Hidden
       EndLifeTxBl.Visibility = Windows.Visibility.Hidden
       EndLifeChBx.Visibility = Windows.Visibility.Hidden
+
+      ColorTxBl.Visibility = Visibility.Hidden
+      ColorBtn.Visibility = Visibility.Hidden
    End Sub
 
    Private Sub ToolTreeView_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ToolTreeView.PreviewMouseUp
@@ -1329,4 +1428,8 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub TCPosTxBx_EgtClosed(sender As Object, e As EventArgs) Handles TCPosTxBx.EgtClosed
+      VerifyToolInSetUp(m_sToolName, TCPosTxBx.Text)
+   End Sub
+
 End Class

Machine/WaterJetPageUC.xaml

@@ -8,266 +8,292 @@
    mc:Ignorable="d" 
    d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
 
-   <!-- Definizione della PolishingsPage -->
-   <Border Style="{DynamicResource OmagCut_PageBorder}">
+    <!-- Definizione della PolishingsPage -->
+    <Border Style="{DynamicResource OmagCut_PageBorder}">
 
-      <Grid Name="WaterJetPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="8*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+        <Grid Name="WaterJetPageGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="8*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
 
-         <!--Lista dei materiali-->
-         <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+            <!--Lista dei materiali-->
+            <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
                       Header="{Binding Material_Msg}"
                       Grid.Row="0" BorderThickness="0">
 
-            <Grid>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="7*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <!--Lista dei materiali-->
-               <ListBox Name="MaterialsLstBx" 
+                    <!--Lista dei materiali-->
+                    <ListBox Name="MaterialsLstBx" 
                              ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
                              Grid.RowSpan="2">
-                  <ListBox.ItemTemplate>
-                     <DataTemplate>
-                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                     </DataTemplate>
-                  </ListBox.ItemTemplate>
-               </ListBox>
-               <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-               <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                        <ListBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ListBox.ItemTemplate>
+                    </ListBox>
+                    <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                    <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
                                           Width="220"
                                           Text="{Binding sNewMaterial}"
                                           Visibility="{Binding NewMaterial_Visibility}"
                                           Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                           KeyboardPosition="Top"/>
-               <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-               <UniformGrid Grid.Row="2" Columns="3">
-                  <Button Name="NewMaterialBtn" Grid.Column="0"
+                    <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                    <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewMaterialBtn" Grid.Column="0"
                                 Content="{Binding New_Msg}"
                                 Command="{Binding NewMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                  <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                        <Button Name="DeleteMaterialBtn" Grid.Column="1"
                                 Content="{Binding Delete_Msg}"
                                 Command="{Binding DeleteMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                  <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                        <Button Name="ModifyMaterialBtn" Grid.Column="1"
                                 Content="{Binding Modify_Msg}"
                                 Command="{Binding ModifyMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-               </UniformGrid>
+                    </UniformGrid>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
-         <Border Style="{DynamicResource OmagCut_Border}" 
+            <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+            <Border Style="{DynamicResource OmagCut_Border}" 
                     Grid.Column="1" Grid.Row="0" 
                     Grid.ColumnSpan="2" Grid.RowSpan="1">
 
-            <Grid Name="SubMaterialGrd" Grid.Column="1">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid Name="SubMaterialGrd" Grid.Column="1">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <!--Sottocategoria dei materiali associata alla lista precedente-->
-               <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+                    <!--Sottocategoria dei materiali associata alla lista precedente-->
+                    <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
                               Header="{Binding SubMaterial_Msg}"
                               Grid.Column="0" Grid.Row="0" 
                               Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
 
-                  <Grid Grid.Column="1">
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="7*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                     </Grid.RowDefinitions>
+                        <Grid Grid.Column="1">
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
 
-                     <!--Lista dei materiali-->
-                     <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                            <!--Lista dei materiali-->
+                            <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
                                      Grid.RowSpan="2">
-                        <ListBox.ItemTemplate>
-                           <DataTemplate>
-                              <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                           </DataTemplate>
-                        </ListBox.ItemTemplate>
-                     </ListBox>
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
 
-                     <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-                     <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                            <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                            <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
                                                   Width="220"
                                                   Text="{Binding sNewSubMaterial}"
                                                   Visibility="{Binding NewSubMaterial_Visibility}"
                                                   Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                                   KeyboardPosition="Top"/>
 
-                     <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-                     <UniformGrid Grid.Row="2" Columns="3">
-                        <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                            <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                            <UniformGrid Grid.Row="2" Columns="3">
+                                <Button Name="NewSubMaterialBtn" Grid.Column="0"
                                         Content="{Binding New_Msg}"
                                         Command="{Binding NewSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                                <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Delete_Msg}"
                                         Command="{Binding DeleteSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                                <Button Name="ModifySubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Modify_Msg}"
                                         Command="{Binding ModifySubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                     </UniformGrid>
+                            </UniformGrid>
 
-                  </Grid>
+                        </Grid>
 
-               </GroupBox>
+                    </GroupBox>
 
-               <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
-               <GroupBox Name="ParamsGpBx" 
+                    <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+                    <GroupBox Name="ParamsGpBx" 
                               Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
                               Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
 
-                  <!--Titolazione delle colonne della tabella-->
-                  <GroupBox.Header >
-                     <Grid Width="700">
-                        <Grid.ColumnDefinitions>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                           <ColumnDefinition Width="1*"/>
-                        </Grid.ColumnDefinitions>
+                        <!--Titolazione delle colonne della tabella-->
+                        <GroupBox.Header >
+                            <Grid Width="700">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
 
-                        <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                                <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+
+                                <Border Grid.Column="1" Margin="1,0,-1,-1"
+                                        Background="{StaticResource Omag_Blue}">
+                                    <TextBlock Text="{Binding Flux_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                </Border>
+
+                                <TextBlock Text="{Binding Q1_Msg}" Grid.Column="2" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding Q2_Msg}" Grid.Column="3" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding Q3_Msg}" Grid.Column="4" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding Q4_Msg}" Grid.Column="5" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding Q5_Msg}" Grid.Column="6" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="7" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                        <TextBlock Text="{Binding AngComp_Msg}" Grid.Column="7" HorizontalAlignment="Center"
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                                <TextBlock Text="{Binding AngComp_Msg}" Grid.Column="8" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
-                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                     </Grid>
+                                           Foreground="{StaticResource Omag_White}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeaderWJ}"/>
+                            </Grid>
 
-                  </GroupBox.Header>
+                        </GroupBox.Header>
 
-                  <!--Definizione della Grid dei parametri delle lavorazioni-->
-                  <Grid Grid.Column="2">
-                     <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="308*"/>
-                        <ColumnDefinition Width="73*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="7*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                     </Grid.RowDefinitions>
+                        <!--Definizione della Grid dei parametri delle lavorazioni-->
+                        <Grid Grid.Column="2">
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="308*"/>
+                                <ColumnDefinition Width="73*"/>
+                            </Grid.ColumnDefinitions>
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
 
-                     <ListBox Name="ParamLstBx"
+                            <ListBox Name="ParamLstBx"
                                      ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
                                      Margin="0,0,0,0"
                                      Grid.RowSpan="2" Grid.ColumnSpan="2">
-                        <ListBox.ItemTemplate>
-                           <DataTemplate>
-                              <Grid Width="700">
-                                 <Grid.ColumnDefinitions>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                 </Grid.ColumnDefinitions>
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <Grid Width="700">
+                                            <Grid.ColumnDefinitions>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                            </Grid.ColumnDefinitions>
 
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                            <Border Grid.Column="1" Margin="0,-5,0,-5"
+                                                    Background="Transparent"
+                                                    BorderBrush="{StaticResource Omag_Blue}" BorderThickness="3, 4, 3, 4">
+                                                <EgtWPFLib:EgtTextBox Text="{Binding Flux}" Grid.Column="1"
+                                                                      Margin="-2,0,-2,0"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                            </Border>
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="2"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="3"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="4"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="5"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="6"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                 <EgtWPFLib:EgtTextBox Text="{Binding dAngComp}" Grid.Column="7" IsLength="False"
+                                            <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="7"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                              </Grid>
-                           </DataTemplate>
-                        </ListBox.ItemTemplate>
-                     </ListBox>
+                                            <EgtWPFLib:EgtTextBox Text="{Binding dAngComp}" Grid.Column="8" IsLength="False"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                        </Grid>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
 
-                     <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="2">
-                        <Button Name="NewParamBtn" Grid.Column="0"
+                            <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="2">
+                                <Button Name="NewParamBtn" Grid.Column="0"
                                         Command="{Binding NewWjParamCommand}"
                                         Content="{Binding New_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="RemoveParamBtn" Grid.Column="1"
+                                <Button Name="RemoveParamBtn" Grid.Column="1"
                                         Command="{Binding DeleteWjParamCommand}"
                                         Content="{Binding Delete_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                     </UniformGrid>
+                            </UniformGrid>
 
-                  </Grid>
+                        </Grid>
 
-               </GroupBox>
+                    </GroupBox>
 
-            </Grid>
-         </Border>
-         <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+                </Grid>
+            </Border>
+            <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
                     Command="{Binding SaveCommand}"
                     Content="{Binding Save_Msg}"
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-      </Grid>
+        </Grid>
 
-   </Border>
+    </Border>
 
 </UserControl>

Machine/WaterJetPageVM.vb

@@ -405,7 +405,13 @@ Public Class WaterjetDbWindowVM
 
    Public ReadOnly Property Thickness_Msg As String
       Get
-         Return "Spessore"
+         Return "Spess."
+      End Get
+   End Property
+
+   Public ReadOnly Property Flux_Msg As String
+      Get
+         Return "mg/min"
       End Get
    End Property
 

MainWindow.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <Border Name="LogoBrd" Background="Transparent">
-                <Image Source="{DynamicResource LogoOmagImg}" Stretch="Uniform" Margin="1"/>
+                <Image Source="../Resources/NewIcons/logo-OmCut.png" Stretch="Uniform" Margin="1"/>
          </Border>
 
          <!-- ** Definizione della Grid delle tab ** -->

MainWindow.xaml.vb

@@ -23,6 +23,11 @@ Class MainWindow
    ' Coefficiente di scalatura della finestra rispetto a standard
    Friend m_dMWinScale As Double = 1
 
+   ' Variabile che definisce l'avvio forzato in modalità FRAME
+   Friend m_OnlyFrame As Boolean = False
+
+   Public Shared m_bShowSVGParkInd As Boolean = False
+
    ' Dichiarazione delle Page UserControl
    Friend m_WorkInProgressPageUC As WorkInProgressPageUC
    Friend m_CurrentProjectPageUC As CurrentProjectPageUC
@@ -101,6 +106,7 @@ Class MainWindow
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
       COMPOFRAME = 2 ^ 22                 ' 4194304
+      CUT_LIGHT = 2 ^ 23                  ' 8388608
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -143,6 +149,19 @@ Class MainWindow
       Options
    End Enum
 
+   ' Elenco delle operazioni tagli diretti (decoficiato in CamAuto per riconoscere il tipo taglio diretto)
+   Friend Enum FlagDirectCuts
+      ManualMove = 1
+      SingleCut = 2
+      GridCut = 3
+      SingleDrill = 4
+      Flattening = 5
+      Squaring = 6
+      SawTest = 7
+      Polishing = 8
+      CopyTemplate = 9
+   End Enum
+
    Public Function GetExeRootDir() As String
       Return m_sExeRoot
    End Function
@@ -326,13 +345,28 @@ Class MainWindow
       EgtSetNestKey(sNestKey)
       Dim bNetHwKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
       EgtSetNetHwKey(bNetHwKey)
+
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString(S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty(sLockId) Then
+         EgtSetLockId(sLockId)
+      End If
+
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2507, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2507, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2705, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2705, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
+      ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
+      If Not bProd Then
+         m_OnlyFrame = GetKeyOption(KEY_OPT.CUT_LIGHT)
+      End If
+
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
       m_sVersion = My.Application.Info.Version.Major.ToString() & "." &
@@ -442,6 +476,7 @@ Class MainWindow
       If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
          Not File.Exists(m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
+         EgtOutLog("Warning: Missing file 'TestWork.lua' in folder 'DirectCmd', buttun 'TEST' collapsed!")
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
       End If
@@ -634,6 +669,41 @@ Class MainWindow
       m_IdleTimer.Interval = TimeSpan.FromMilliseconds(100)
       m_IdleTimer.Start()
 
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      ' MESSAGGIO...
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 0 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+            'sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "Expired"
+         End If
+      End If
+
+      Dim bShowInfoAssistance As Boolean = True
+      bShowInfoAssistance = (GetPrivateProfileInt(S_GENERAL, K_SHOWEXPIREASSITANCE, "1", GetIniFile) <> 0)
+      ' Or nAssLeftDays = 358
+      If bShowInfoAssistance And ((nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28) Then
+         ' 91145=Avviso importante
+         Dim sMsg_Title As String = EgtMsg(91145)
+         ' 91146=Il contratto di aggiornamento della licenza in uso scadrà tra {0} giorni./n
+         Dim sMsg_AssStatus As String = String.Format(EgtMsg(91146), nAssLeftDays.ToString())
+         ' 91147=Se desiderate rimanere aggiornati e continuare ad usufruire dei benefici del servizio, vi invitiamo a contattare la nostra assistenza al seguente indirizzo:/n
+         Dim sMsg_RefAssistance As String = EgtMsg(91147)
+         Dim sAssistance As String = String.Empty
+         GetPrivateProfileString(S_GENERAL, "Assistances", "", sAssistance, GetIniFile)
+         Dim sItems As String() = sAssistance.Split(","c)
+         For Each Item As String In sItems
+            sMsg_RefAssistance &= " → " & Item.Trim & " /n"
+         Next
+         ' 91148=Grazie per la vostra collaborazione.
+         Dim sMsg_ThankYou As String = EgtMsg(91148)
+         Dim MyLicWn As New LicenseWindow(Me, sMsg_AssStatus & sMsg_RefAssistance & sMsg_ThankYou, sMsg_Title)
+         MyLicWn.WindowStartupLocation = WindowStartupLocation.CenterOwner
+         MyLicWn.Show()
+      End If
+
       ' inizilizzo
    End Sub
 
@@ -1100,7 +1170,7 @@ Class MainWindow
       End If
       ' Inizio la chiusura del programma (se NUM_OLD verifico di aver terminato il processo DripFeed)
       EgtOutLog("Iniziato processo di chiusura programma")
-      m_IsClosingApplication = If( m_CNCommunication.m_nNCType = 1, 1, 2)
+      m_IsClosingApplication = If(m_CNCommunication.m_nNCType = 1, 1, 2)
       Dim nCount As Integer = 0
       While m_IsClosingApplication <> 2
          If nCount > 5 Then
@@ -1161,13 +1231,17 @@ Class MainWindow
             m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.GridCut_Unloaded(sender, e)
          Case ControlsDirectCutUC.DirectCutPages.FlatteningCut
             m_DirectCutPageUC.m_ControlsDirectCutUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
+      End Select
+
+      Select Case m_DirectCutPageUC.m_ControlsDirectCutUC1.m_ActiveDirectCutPage
          Case ControlsDirectCutUC.DirectCutPages.CopyTemplate
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
          Case ControlsDirectCutUC.DirectCutPages.Polishing
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_Polishing.Polishing_Unloaded(sender, e)
-         Case ControlsDirectCutUC.DirectCutPages.SawTest
+         Case ControlsDirectCutUC1.DirectCutPages.SawTest
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_SawTest.SawTest_Unloaded(sender, e)
       End Select
+
       Return True
    End Function
 
@@ -1238,11 +1312,16 @@ Class MainWindow
          m_ProdLineTimer.Start()
       End If
       ' di default attivo la pagina CadCut
-      m_ActivePage = MainWindow.Pages.CadCut
+      If m_OnlyFrame Then
+         m_ActivePage = MainWindow.Pages.FrameCut
+      Else
+         m_ActivePage = MainWindow.Pages.CadCut
+      End If
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Friend Sub EgtWPFInit()
@@ -1274,8 +1353,34 @@ Class MainWindow
       Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
       EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
-      CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      If m_OnlyFrame Then
+         If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+            m_ActivePage <> Pages.RawPart And m_ActivePage <> Pages.DirectCut And m_ActivePage <> Pages.Simulation Then
+            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91141), EgtMsg(91142), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPreNewProject()
+            ' Cancello progetto salvato con nome da file ini
+            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", GetIniFile())
+            ' Scelta tavola della macchina
+            Dim nTabInd As Integer = m_CadCutPageUC.m_ProjectMgr.ChooseTable()
+            ' Creo nuovo progetto
+            m_CurrentProjectPageUC.NewProject(nTabInd, False)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
+            FrameCutBtn_Click(Nothing, Nothing)
+            CadCutBtn.IsEnabled = False
+         Else
+            FrameCutBtn.IsEnabled = True
+            CadCutBtn.IsEnabled = False
+            ' Attivo il pulsante FRAME
+            'FrameCutBtn.IsChecked = True
+            'CadCutBtn.IsChecked = False
+         End If
+      Else
+         CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
+         FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      End If
+
       ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
@@ -2028,6 +2133,7 @@ Class MainWindow
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
       Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
    End Sub

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.7.2")>
-<Assembly: AssemblyFileVersion("2.5.7.2")>
+<Assembly: AssemblyVersion("2.7.6.2")>
+<Assembly: AssemblyFileVersion("2.7.6.2")>

NcComm/CNCommunication.vb

@@ -4,6 +4,8 @@ Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports System.IO
 Imports System.Text
+Imports EgtWPFLib.EgtMsgBox
+Imports OmagCUT.CN_generico
 
 Public Class CNCommunication
 
@@ -28,6 +30,9 @@ Public Class CNCommunication
    ' Oggetto CN
    Public WithEvents m_CN As CN_generico
 
+   ' NUOVO ! in fase di test
+   Private ListReferenceIndex As New List(Of RefereceFlagSimens)
+
    ' Flag di aggiornamento dati
    Private m_bNewPosData As Boolean = True
    Private m_bNewDeltaData As Boolean = True
@@ -236,6 +241,17 @@ Public Class CNCommunication
       m_bInInches = (GetPrivateProfileInt(S_AXES, K_ININCHES, 0, m_MainWindow.GetMachIniFile()) <> 0)
    End Sub
 
+   Private Sub KillSimensCom(sProcessName As String)
+      Dim sAppName As String = Path.GetFileNameWithoutExtension(sProcessName)
+      Dim pList() As System.Diagnostics.Process = System.Diagnostics.Process.GetProcesses
+      For Each proc As System.Diagnostics.Process In pList
+         If proc.ProcessName.ToString = sAppName Then
+            proc.Kill()
+            EgtOutLog("ProcessKill : " & """" & sProcessName & """")
+         End If
+      Next
+   End Sub
+
    Private Sub InitCn()
 
       m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -271,6 +287,7 @@ Public Class CNCommunication
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
          GetPrivateProfileString(S_NCDATA, K_COMM, "XIP01, 0, 10, 0, 0, 0", sVal, m_MainWindow.GetMachIniFile())
+         EgtOutLog(" → Tipo di comunicazione: " & sVal)
          m_CN.SetCnDataVar(CN_generico.CnData.Comm, sVal)
          GetPrivateProfileString(S_NCDATA, K_REFRESH, "200", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.Refresh, sVal)
@@ -372,6 +389,9 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumOff, sVal)
          GetPrivateProfileString(S_NCDATA, K_BYPASSTATE, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
+         ' ver 2.6i1 : nuova gestione SiemensONE
+         GetPrivateProfileString(S_NCDATA, K_RESETSTATUS, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.ResetStatus, sVal)
 
          ' nuove variabili: stato dei nuovi pulsanti
          nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
@@ -389,10 +409,14 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-         ' Solo per controllo FANUNC
+         ' Solo per controllo FANUC
          GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
 
+         ' Solo per controllo speciale NUM 22/01/2025
+         GetPrivateProfileString(S_NCDATA, K_CPOS, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.CPos, sVal)
+         If Not String.IsNullOrEmpty(sVal) Then m_CN.bCPos = True
 
          ' Inizializzo la comunicazione
          m_CN.Init()
@@ -402,6 +426,10 @@ Public Class CNCommunication
          EgtOutLog("Error starting NC communication : " & ex.Message)
       End Try
 
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+      ' m_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+
       Select Case m_nNCType
          Case 0   'Debug
             m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -426,26 +454,137 @@ Public Class CNCommunication
                Try
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
                   Dim sArg As String = "-start """ & m_sCNSiemensPath & """"
+
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
+                  KillSimensCom(m_sCNSiemensHMIPath)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+
+                  EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
                   m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
-                     ' stati bottoni parte 1
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
-                     ' stati bottoni ventose
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac), VarType.TInteger, 1)
-                     'stati porte
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed), VarType.TInteger, 2)
-                     ' 
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
-                     ' stati bottoni parte 2
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.CBAxes), VarType.TInteger, 4)
-                     ' ampere e ampere override
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Spindle), VarType.TDouble, 0)
-                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
 
+                     ' Leggo tutte le varaibili che sono state caricate nel percorso [NcData] del file *.ini
+                     Dim nIndexArrayBool As Integer = 0
+                     Dim nIndexArrayInt As Integer = 0
+                     Dim nIndexArrayLong As Integer = 0
+                     Dim nIndexArrayDoub As Integer = 0
+                     Dim nIndexArrayStr As Integer = 0
+                     ' lista che associa Indice del vettore al nome (per associazioni Bit a Bit)
+                     Dim ListIndexToVar As New List(Of IndexArrayToBit)
+                     ' Creo un vettore che mi permetta di risalire a cosa contiene ogni vettore FLAG (di tipo Enum) 
+                     For ItemIndex As Integer = 0 To m_CN.m_szCnDataVar.Count - 1
+                        ' escludo i Flag 'Comm' e 'Refresh'
+                        If ItemIndex = CnData.Comm Or ItemIndex = CnData.Refresh Then
+                           Continue For
+                        End If
+                        If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(ItemIndex)) Then
+                           Dim sItem As String() = m_CN.m_szCnDataVar(ItemIndex).Split(","c)
+                           Dim nVarType As VarType = VarType.TInteger
+                           If sItem.Count > 1 Then
+                              If IsNumeric(sItem(0)) Then
+                                 Select Case CInt(sItem(0))
+                                    Case 0
+                                       If nIndexArrayBool > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TBoolean
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayBool)
+                                       Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayBool, ItemIndex, nVarType)
+                                       If sItem.Count = 3 Then
+                                          ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                          NewRefFlafSiemens.DefaultValue = sItem(2)
+                                       End If
+                                       ListReferenceIndex.Add(NewRefFlafSiemens)
+                                       nIndexArrayBool += 1
+                                    Case 1
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TInteger
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayInt)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt, ItemIndex, nVarType))
+                                       nIndexArrayInt += 1
+                                    Case 2
+                                       If nIndexArrayLong > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TLong
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayLong)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayLong, ItemIndex, nVarType))
+                                       nIndexArrayLong += 1
+                                    Case 3
+                                       If nIndexArrayDoub > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TDouble
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayDoub)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayDoub, ItemIndex, nVarType))
+                                       nIndexArrayDoub += 1
+                                    Case 4
+                                       If nIndexArrayStr > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TString
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayStr)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayStr, ItemIndex, nVarType))
+                                       nIndexArrayStr += 1
+                                    Case 5
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       ' verifico se devo riempire un vettore con bit
+                                       Dim sSubItem As String() = sItem(1).Split("."c)
+                                       ' //My. name. Is Bond._James Bond!
+                                       Dim sVarName = String.Join(".", sSubItem.Take(sSubItem.Length - 1)) ' //My. name. Is Bond
+                                       Dim sIndexBit = sSubItem.Last() ' //_James Bond!
+                                       If sSubItem.Count > 1 And IsNumeric(sIndexBit) Then
+                                          Dim bFound As Boolean = False
+                                          Dim nIndexArrayInt_1 As Integer = nIndexArrayInt
+                                          For Each VarSiemens As IndexArrayToBit In ListIndexToVar
+                                             If VarSiemens.sNameVar.Trim = sVarName.Trim Then
+                                                nIndexArrayInt_1 = VarSiemens.nIndex
+                                                bFound = True
+                                                Exit For
+                                             End If
+                                          Next
+                                          nVarType = VarType.TInteger
+                                          m_CN.DVariables_Read_Subscription(sVarName, nVarType, nIndexArrayInt_1)
+                                          Dim NewRefFlafSiemens As RefereceFlagSimens = New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit)
+                                          If sItem.Count = 3 Then
+                                             ' forzo la lettura della variabile di default (ignoro lo stato letto da CN)
+                                             NewRefFlafSiemens.DefaultValue = sItem(2)
+                                          End If
+                                          ListReferenceIndex.Add(NewRefFlafSiemens)
+                                          If Not bFound Then
+                                             nIndexArrayInt += 1
+                                             ListIndexToVar.Add(New IndexArrayToBit(nIndexArrayInt_1, sVarName.Trim))
+                                          End If
+                                       Else
+                                          EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è inidicato il bit associato")
+                                       End If
+                                    Case Else
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       nVarType = VarType.TInteger
+                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayInt)
+                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt, ItemIndex, nVarType))
+                                       nIndexArrayInt += 1
+                                 End Select
+                              End If
+                           Else
+                              EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è indicato il tipo (0→Bool,1→Int,2→Long,3→Double,4→String,5→Bit)")
+                           End If
+                        End If
+                     Next
+                     ' Attraverso la funzione "RefreshNoEvents" rileggo i dati caricati
+
+                     ' Recupero il perocorso delle variabili PLC
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+
                   ElseIf m_CN.m_IsActiveModeSubscription Then
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
@@ -630,8 +769,8 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
-            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
-            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -973,6 +1112,68 @@ Public Class CNCommunication
       'Laser = 16384
    End Enum
 
+#Region "MASCHERA per conttrollo Bit a Bit"
+   <Flags()>
+   Public Enum Mask As Integer
+      bit_Err = -1
+      bit_0 = &H1       ' 1
+      bit_1 = &H2       ' 2
+      bit_2 = &H4       ' 4
+      bit_3 = &H8       ' 8
+      bit_4 = &H10      ' 16
+      bit_5 = &H20      ' 32
+      bit_6 = &H40      ' 64
+      bit_7 = &H80      ' 128
+      bit_8 = &H100     ' 256
+      bit_9 = &H200     ' 512
+      bit_10 = &H400     ' 1024
+      bit_11 = &H800     ' 2048
+      bit_12 = &H1000    ' 4096
+      bit_13 = &H2000    ' 8192
+      bit_14 = &H4000    ' 16384
+      bit_15 = &H8000    ' 32768
+   End Enum
+
+   Public Function GetMaskByBit(IndexBit As Integer) As Mask
+      Dim Bit_ As Mask = Mask.bit_Err
+      Select Case IndexBit
+         Case 0
+            Bit_ = Mask.bit_0
+         Case 1
+            Bit_ = Mask.bit_1
+         Case 2
+            Bit_ = Mask.bit_2
+         Case 3
+            Bit_ = Mask.bit_3
+         Case 4
+            Bit_ = Mask.bit_4
+         Case 5
+            Bit_ = Mask.bit_5
+         Case 6
+            Bit_ = Mask.bit_6
+         Case 7
+            Bit_ = Mask.bit_7
+         Case 8
+            Bit_ = Mask.bit_8
+         Case 9
+            Bit_ = Mask.bit_9
+         Case 10
+            Bit_ = Mask.bit_10
+         Case 11
+            Bit_ = Mask.bit_11
+         Case 12
+            Bit_ = Mask.bit_12
+         Case 13
+            Bit_ = Mask.bit_13
+         Case 14
+            Bit_ = Mask.bit_14
+         Case 15
+            Bit_ = Mask.bit_15
+      End Select
+      Return Bit_
+   End Function
+#End Region    ' Maschera per controllo Bit a Bit
+
    Public Function IsSetAll(value As Integer, flag As Integer) As Boolean
       ' somma Bit a Bit
       Return ((value And flag) = flag)
@@ -988,23 +1189,23 @@ Public Class CNCommunication
 
       m_MachineStatus.DisplaySpeed()
 
-      m_MachineStatus.DisplayPower()
+      'm_MachineStatus.DisplayPower()
 
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
 
-      If m_nCountRefresh > 10 Then
-         Dim TempCurrMode As Short = m_CN.read_active_mode()
-         'EgtOutLog("Machine status: " & TempCurrMode)
-         If TempCurrMode <> m_nCurrMode Then
-            'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
-            m_nCurrMode = CInt(TempCurrMode)
-            m_MachineStatus.DisplayActiveMode(m_nCurrMode)
-         End If
-         m_nCountRefresh = 0
-      Else
-         m_nCountRefresh = m_nCountRefresh + 1
-      End If
+      'If m_nCountRefresh > 10 Then
+      '   Dim TempCurrMode As Short = m_CN.read_active_mode()
+      '   'EgtOutLog("Machine status: " & TempCurrMode)
+      '   If TempCurrMode <> m_nCurrMode Then
+      '      'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+      '      m_nCurrMode = CInt(TempCurrMode)
+      '      m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+      '   End If
+      '   m_nCountRefresh = 0
+      'Else
+      '   m_nCountRefresh = m_nCountRefresh + 1
+      'End If
 
       If m_CN.b_NC_error Then
          ErrorList.Clear()
@@ -1021,61 +1222,176 @@ Public Class CNCommunication
          End If
       End If
 
+      ' lettura delle variabili abbonate
       If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
 
-         ' lettura variabili stati mancanti su Siemens
-         Dim nVarValue As Integer = m_CN.n_data(0)
-         EgtOutLog("Variabile PLC control addr: " & 1 & " value: " & nVarValue)
-         m_CN.bSpindleState = IsSetAll(nVarValue, ControlStates.Spindle)
-         m_CN.bLaserTracState = IsSetAll(nVarValue, ControlStates.LaserTrac)
-         m_CN.bCoolantState = IsSetAll(nVarValue, ControlStates.Coolant)
-         m_CN.bInternalCoolantState = IsSetAll(nVarValue, ControlStates.InternalCoolant)
-         m_CN.bExternCoolantState = IsSetAll(nVarValue, ControlStates.ExternCoolant)
-         m_CN.bCBAxesState = IsSetAll(nVarValue, ControlStates.CAxis)
-         m_CN.bAirBlowState = IsSetAll(nVarValue, ControlStates.AirBlow)
-         m_CN.bHomeState = IsSetAll(nVarValue, ControlStates.Home)
-         m_CN.bTableUpState = IsSetAll(nVarValue, ControlStates.TableUp)
-         m_CN.bTableDownState = IsSetAll(nVarValue, ControlStates.TableDown)
-         m_CN.bLimitZState = IsSetAll(nVarValue, ControlStates.LimitZ)
-         m_CN.b5AxesState = IsSetAll(nVarValue, ControlStates.Axis5)
+         '------------ SINUMERIK ONE ----------------------------------------------
+         For IndxLst As Integer = 0 To ListReferenceIndex.Count - 1
+            Dim nType As Integer = ListReferenceIndex(IndxLst).TypeArray
+            Dim nFlag As Integer = ListReferenceIndex(IndxLst).FlagIndex
+            Dim nIndex As Integer = ListReferenceIndex(IndxLst).SiemnesArrayIndex
+            Dim nIndexBit As Integer = ListReferenceIndex(IndxLst).IndexBit
+            Dim sDefaultValue As String = ListReferenceIndex(IndxLst).DefaultValue
+            Dim b_temp As Boolean = False
+            Dim n_temp As Integer = 0
+            Dim l_temp As Long = 0.0
+            Dim d_temp As Double = 0.0
+            ' leggo il valore caricato 
+            Select Case nType
+               Case VarType.TBoolean
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default boolean value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = m_CN.b_data(nIndex)
+                     End Try
+                  Else
+                     b_temp = m_CN.b_data(nIndex)
+                  End If
+               Case VarType.TInteger
+                  n_temp = m_CN.n_data(nIndex)
+                  ' VENTOSE: lettura dato da intero Bit a Bit (ver_2.6h1), ritorno un Boolean
+                  If Not String.IsNullOrEmpty(sDefaultValue) Then
+                     ' ver 2.6i1
+                     Try
+                        b_temp = CBool(sDefaultValue)
+                     Catch ex As Exception
+                        EgtOutLog("Default bit value of flag " & nFlag.ToString & " is not Boolean, verify the form: True or true or 1, False or false or 0")
+                        b_temp = ReadBit(nIndexBit, n_temp)
+                     End Try
+                  Else
+                     b_temp = ReadBit(nIndexBit, n_temp)
+                  End If
+               Case VarType.TLong
+                  l_temp = m_CN.l_data(nIndex)
+               Case VarType.TDouble
+                  d_temp = m_CN.d_data(nIndex)
+               Case VarType.TString
+                  'b_temp = If(m_CN.d_data(nIndex) = 0, True, False)
+            End Select
 
-         nVarValue = m_CN.n_data(1)
-         'EgtOutLog("Variabile PLC vacuum  addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac) & " value: " & nVarValue)
-         m_CN.bVacuumUp = IsSetAll(nVarValue, VacuumStates.VacuumUp)
-         m_CN.bVacuumDown = IsSetAll(nVarValue, VacuumStates.VacuumDown)
-         m_CN.bVacuum2Up = IsSetAll(nVarValue, VacuumStates.Vacuum2Up)
-         m_CN.bVacuum2Down = IsSetAll(nVarValue, VacuumStates.Vacuum2Down)
-         m_CN.bVacuum1State = IsSetAll(nVarValue, VacuumStates.Vacuum1State)
-         m_CN.bVacuum2State = IsSetAll(nVarValue, VacuumStates.Vacuum2State)
-         m_CN.bVacuum3State = IsSetAll(nVarValue, VacuumStates.Vacuum3State)
-         m_CN.bVacuum4State = IsSetAll(nVarValue, VacuumStates.Vacuum4State)
-         m_CN.bVacuum5State = IsSetAll(nVarValue, VacuumStates.Vacuum5State)
-         m_CN.bVacuum6State = IsSetAll(nVarValue, VacuumStates.Vacuum6State)
-         m_CN.bOpenAllState = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State And m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         m_CN.bCloseAllState = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State And Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         m_CN.bOpen123State = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State)
-         m_CN.bOpen456State = (m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         m_CN.bClose123State = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State)
-         m_CN.bClose456State = (Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         m_CN.bBlowState = IsSetAll(nVarValue, VacuumStates.AirBlow)
-         m_CN.bVacuumOn = IsSetAll(nVarValue, VacuumStates.VacuumOn)
-         m_CN.bVacuumOff = IsSetAll(nVarValue, VacuumStates.VacuumOff)
-         m_CN.bBypassState = IsSetAll(nVarValue, VacuumStates.BypassState)
+            Select Case nFlag
+               Case CN_generico.CnData.Mode    ' (0) Stato modo attivo
+                  m_CN.n_index_mode = nIndex
+                  If m_nCountRefresh > 10 Then
+                     Dim TempCurrMode As Short = m_CN.read_active_mode()
+                     'EgtOutLog("Machine status: " & TempCurrMode)
+                     If TempCurrMode <> m_nCurrMode Then
+                        'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+                        m_nCurrMode = CInt(TempCurrMode)
+                        m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+                        m_CN.nMachineMode = m_nCurrMode
+                     End If
+                     m_nCountRefresh = 0
+                  Else
+                     m_nCountRefresh = m_nCountRefresh + 1
+                  End If
+               Case CN_generico.CnData.Power
+                  m_CN.d_spindle_power = d_temp
+               Case CN_generico.CnData.Spindle     ' (7) Stato rotazione mandrino
+                  m_CN.bSpindleState = b_temp
+               Case CN_generico.CnData.Coolant     ' (8) Stato acqua
+                  m_CN.bCoolantState = b_temp
+               Case CN_generico.CnData.Laser       ' (9) Stato laser punto
+                  m_CN.bLaserState = b_temp
+               Case CN_generico.CnData.PowerOvr       ' (10) Amperaggio
+                  m_CN.bPowerOvr = d_temp
+               Case CN_generico.CnData.InternalCoolant     ' (13) Stato acqua interna
+                  m_CN.bInternalCoolantState = b_temp
+               Case CN_generico.CnData.ExternCoolant     ' (14) Stato acqua esterna
+                  m_CN.bExternCoolantState = b_temp
+               Case CN_generico.CnData.CBAxes     ' (15) Stato ativazione assi c e b
+                  m_CN.bCBAxesState = b_temp
+               Case CN_generico.CnData.AirBlow     ' (16) Stato soffio utensile
+                  m_CN.bAirBlowState = b_temp
+               Case CN_generico.CnData.Home     ' (17) Stato home
+                  m_CN.bHomeState = b_temp
+               Case CN_generico.CnData.TableUp     ' (18) Stato tavolo su
+                  m_CN.bTableUpState = b_temp
+               Case CN_generico.CnData.TableDown     ' (19) Stato tavolo giu'
+                  m_CN.bTableDownState = b_temp
+               Case CN_generico.CnData.DoorClosed    ' (20) Stato porte
+                  m_CN.nDoorClosedState = n_temp
+               Case CN_generico.CnData.LimitZ     ' (21) Stato limitazione asse Z
+                  m_CN.bLimitZState = b_temp
+               Case CN_generico.CnData.VacuumUp     ' (22) Stato ventosa su'
+                  m_CN.bVacuumUp = b_temp
+               Case CN_generico.CnData.VacuumDown     ' (23) Stato ventosa giu'
+                  m_CN.bVacuumDown = b_temp
+               Case CN_generico.CnData.Vacuum2Up     ' (24) Stato ventosa2 su'
+                  m_CN.bVacuum2Up = b_temp
+               Case CN_generico.CnData.Vacuum2Down     ' (25) Stato ventosa2 giu'
+                  m_CN.bVacuum2Down = b_temp
+               Case CN_generico.CnData.Vacuum1State     ' (26) Stato ventosa 1
+                  m_CN.bVacuum1State = b_temp
+               Case CN_generico.CnData.Vacuum2State     ' (27) Stato ventosa 2
+                  m_CN.bVacuum2State = b_temp
+               Case CN_generico.CnData.Vacuum3State     ' (28) Stato ventosa 3
+                  m_CN.bVacuum3State = b_temp
+               Case CN_generico.CnData.Vacuum4State     ' (29) Stato ventosa 4
+                  m_CN.bVacuum4State = b_temp
+               Case CN_generico.CnData.Vacuum5State     ' (30) Stato ventosa 5
+                  m_CN.bVacuum5State = b_temp
+               Case CN_generico.CnData.Vacuum6State     ' (31) Stato ventosa 6
+                  m_CN.bVacuum6State = b_temp
+               Case CN_generico.CnData.Vacuum135State     ' (32) Stato ventose 135
+                  m_CN.bVacuum135State = b_temp
+               Case CN_generico.CnData.Vacuum246State     ' (33) Stato ventose 246
+                  m_CN.bVacuum246State = b_temp
+               Case CN_generico.CnData.OpenAllState     ' (34) Stato apertura ventose
+                  m_CN.bOpenAllState = b_temp
+               Case CN_generico.CnData.CloseAllState     ' (35) Stato chiusura ventose
+                  m_CN.bCloseAllState = b_temp
+               Case CN_generico.CnData.Open123State     ' (36) Stato apertura ventose
+                  m_CN.bOpen123State = b_temp
+               Case CN_generico.CnData.Open456State     ' (37) Stato apertura ventose
+                  m_CN.bOpen456State = b_temp
+               Case CN_generico.CnData.Close123State     ' (38) Stato chiusura ventose
+                  m_CN.bClose123State = b_temp
+               Case CN_generico.CnData.Close456State     ' (39) Stato chiusura ventose
+                  m_CN.bClose456State = b_temp
+               Case CN_generico.CnData.BlowState     ' (40) Stato soffio ventose
+                  m_CN.bBlowState = b_temp
+               Case CN_generico.CnData.VacuumOn     ' (41) Stato aspirazione ventose acceso
+                  m_CN.bVacuumOn = b_temp
+               Case CN_generico.CnData.BypassState     ' (42) Stato bypass
+                  m_CN.bBypassState = b_temp
+               Case CN_generico.CnData.Vacuum0     ' (43) Stato rotazione ventosa 0
+                  m_CN.bVacuum0 = b_temp
+               Case CN_generico.CnData.Vacuum90     ' (44) Stato rotazione ventosa 0
+                  m_CN.bVacuum90 = b_temp
+               Case CN_generico.CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
+                  m_CN.bVacuumOff = b_temp
+               Case CN_generico.CnData.LaserTrac   ' (46) Stato laser tracciatura
+                  m_CN.bLaserTracState = b_temp
+               Case CN_generico.CnData.XYJog     ' (47) 
+                  m_CN.bXYJog = b_temp
+               Case CN_generico.CnData.ZCJog     ' (48)
+                  m_CN.bZCJog = b_temp
+               Case CN_generico.CnData.ZBJog     ' (49)
+                  m_CN.bZBCJog = b_temp
+               Case CN_generico.CnData.PowerON     ' (50)
+                  m_CN.bPowerON = b_temp
+               Case CN_generico.CnData.Remote     ' (51)
+                  m_CN.bRemote = b_temp
+               Case CN_generico.CnData.Parking     ' (52)
+                  m_CN.bParkingState = b_temp
+               Case CN_generico.CnData.nAxes     ' (55)
+                  m_CN.n_index_is_G24_active = nIndex
+                  m_CN.b5AxesState = b_temp
+               Case CN_generico.CnData.ResetStatus     ' (56)
+                  m_CN.bResetState = b_temp
 
-         nVarValue = m_CN.n_data(2)
-         'EgtOutLog("Variabile PLC  door addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed) & " value: " & nVarValue)
-         m_CN.nDoorClosedState = nVarValue
-
-         nVarValue = m_CN.n_data(4)
-         'EgtOutLog("Variabile PLC control 2 addr: " & 3 & " value: " & nVarValue)
-         m_CN.bLaserState = IsSetAll(nVarValue, ControlStates2.Laser)
-         m_CN.bHsm = IsSetAll(nVarValue, ControlStates2.Hsm)
-         m_CN.bResetState = IsSetAll(nVarValue, ControlStates2.ResetState)
-         m_CN.bFeedHold = IsSetAll(nVarValue, ControlStates2.FeedHold)
-         m_CN.bSpeedHold = IsSetAll(nVarValue, ControlStates2.SpindleHold)
+            End Select
+         Next
+         '------------ SINUMERIK ONE ----------------------------------------------
 
       End If
 
+      m_MachineStatus.DisplayPower()
+
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -1125,6 +1441,7 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            ' modalità vecchia
             If m_CN.Is_G24_active() Then
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
@@ -1153,8 +1470,25 @@ Public Class CNCommunication
          End If
       End If
 
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
    End Sub
 
+   Private Function ReadBit(IndexBit As Integer, Val As Integer) As Boolean
+      If IndexBit < 0 Then Return False
+      Dim _mask = GetMaskByBit(IndexBit)
+      If _mask = Mask.bit_Err Then Return False
+      If (Val And _mask) = 0 Then Return False
+      Return True
+   End Function
+
    Friend Function SetProgramMainOrSub(bMain As Boolean) As Boolean
       Return m_CN.SetProgramMainOrSub(bMain)
    End Function
@@ -1162,6 +1496,11 @@ Public Class CNCommunication
    Friend Function SendProgram(ByVal sCncPath As String, ByVal nNumProg As Integer,
                                Optional bActivate As Boolean = True) As Boolean
       Dim bOk As Boolean = True
+
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+      ' m_nNCType = 2
+      ' !!!!!!!!!!!!!!!!!! FORZO IL PROGRAMMA !!!!!!!!!!!!!!!!!!
+
       ' Download programma
       If m_MainWindow.m_bNCLink Then
          bOk = (m_nNCType > 0)
@@ -1195,7 +1534,7 @@ Public Class CNCommunication
             ' Attesa opportuna
             System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
-         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         EgtOutLog("Download_NC_prog(" & sCncPath & ", " & sNumProg.ToString & ")")
          ' -------------- START DOWNLOAD -------------- 
          TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
@@ -1236,7 +1575,7 @@ Public Class CNCommunication
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
-            EgtOutLog("ActivateProgram(nNumProg)")
+            EgtOutLog("ActivateProgram(" & nNumProg.ToString & ")")
             TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
             EgtOutLog(TimeSpanEnd())
@@ -1265,9 +1604,17 @@ Public Class CNCommunication
       Return bOk
    End Function
 
+   Private Sub GetSpecialCAxes()
+      If m_CN.bCPos Then
+         m_CN.d_axis_position(m_nA4) = m_CN.dCPos
+      End If
+   End Sub
+
    Friend Function GetAxesPositions(ByRef dA1 As Double, ByRef dA2 As Double, ByRef dA3 As Double,
                                     ByRef dA4 As Double, ByRef dA5 As Double, ByRef dA6 As Double,
                                     ByRef dA7 As Double, ByRef dA8 As Double, ByRef dA9 As Double, ByRef dA10 As Double) As Boolean
+      ' gestione speciale asse C
+      GetSpecialCAxes()
       dA1 = If(m_nA1 >= 0, m_CN.d_axis_position(m_nA1), 0)
       dA2 = If(m_nA2 >= 0, m_CN.d_axis_position(m_nA2), 0)
       dA3 = If(m_nA3 >= 0, m_CN.d_axis_position(m_nA3), 0)
@@ -1284,6 +1631,8 @@ Public Class CNCommunication
 
    Friend Function GetAxesPositions(ByRef dA1 As Double, ByRef dA2 As Double, ByRef dA3 As Double,
                                     ByRef dA4 As Double, ByRef dA5 As Double) As Boolean
+      ' gestione speciale asse C
+      GetSpecialCAxes()
       dA1 = If(m_nA1 >= 0, m_CN.d_axis_position(m_nA1), 0)
       dA2 = If(m_nA2 >= 0, m_CN.d_axis_position(m_nA2), 0)
       dA3 = If(m_nA3 >= 0, m_CN.d_axis_position(m_nA3), 0)
@@ -1302,6 +1651,8 @@ Public Class CNCommunication
    End Function
 
    Friend Function GetRotaryAxesPositions(ByRef dR1 As Double, ByRef dR2 As Double) As Boolean
+      ' gestione speciale asse C
+      GetSpecialCAxes()
       dR1 = If(m_nA4 >= 0, m_CN.d_axis_position(m_nA4), 0)
       dR2 = If(m_nA5 >= 0, m_CN.d_axis_position(m_nA5), 0)
       Return m_bAxesOk
@@ -1366,3 +1717,95 @@ Public Class CNCommunication
    End Function
 
 End Class
+
+Public Class RefereceFlagSimens
+
+   Private m_SiemnesArrayIndex As Integer
+   Private m_FlagIndex As Integer
+   Private m_TypeArray As Integer
+   ' Opzionale
+   Private m_IndexBit As Integer = -1
+   Private m_DefaultValue As String = ""
+
+   Public Property SiemnesArrayIndex As Integer
+      Get
+         Return m_SiemnesArrayIndex
+      End Get
+      Set(value As Integer)
+         m_SiemnesArrayIndex = value
+      End Set
+   End Property
+
+   Public Property FlagIndex As Integer
+      Get
+         Return m_FlagIndex
+      End Get
+      Set(value As Integer)
+         m_FlagIndex = value
+      End Set
+   End Property
+
+   Public Property TypeArray As Integer
+      Get
+         Return m_TypeArray
+      End Get
+      Set(value As Integer)
+         m_TypeArray = value
+      End Set
+   End Property
+
+   Public Property IndexBit As String
+      Get
+         Return m_IndexBit
+      End Get
+      Set(value As String)
+         m_IndexBit = value
+      End Set
+   End Property
+
+   Public Property DefaultValue As String
+      Get
+         Return m_DefaultValue
+      End Get
+      Set(value As String)
+         m_DefaultValue = value
+      End Set
+   End Property
+
+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+   End Sub
+
+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer, nIndBit As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+      m_IndexBit = nIndBit
+   End Sub
+
+End Class
+
+Public Class IndexArrayToBit
+
+   Private m_nIndex As Integer = 0
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_sNameVar As String = ""
+   Public ReadOnly Property sNameVar As String
+      Get
+         Return m_sNameVar
+      End Get
+   End Property
+
+   Sub New(Index As Integer, NameVar As String)
+      m_nIndex = Index
+      m_sNameVar = NameVar
+   End Sub
+
+End Class

NcComm/CN_Siemens.vb

@@ -87,6 +87,7 @@ Public Class CN_Siemens
             Case 8   ' Modalita Ref Point
                sDBVarPath &= "REF_POINT"
          End Select
+         ' /plc/"OmagCUT_DB".CTRL.AUTO
          DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")
          Return 0
       Else
@@ -132,7 +133,7 @@ Public Class CN_Siemens
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
       If m_IsSiemensOne Or m_IsActiveModeSubscription Then
-         Select Case n_data(3)
+         Select Case n_data(n_index_mode)
             Case 1
                Return 0
             Case 2
@@ -152,7 +153,12 @@ Public Class CN_Siemens
 
    Public Overrides Function Is_G24_active() As Boolean
 
-      Return M_MMFiles.SiemensRet.b_interf_G24
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
+         Return b_data(n_index_is_G24_active)
+
+      Else
+         Return M_MMFiles.SiemensRet.b_interf_G24
+      End If
 
    End Function
 
@@ -217,12 +223,12 @@ Public Class CN_Siemens
    Public Overrides Sub DVariables_WriteVariables3(VarAddr As String, ParType As Short, nVarValue As Integer, lVarValue As Long, dVarValue As Double, sVarValue As String)
       Dim n_ret As Short = Write_var(VarAddr, ParType, nVarValue, lVarValue, dVarValue, sVarValue)
       'EgtOutLog("CN SIEMENS Dopo scrittura variabile")
-
    End Sub
 
    Public Overrides Sub DVariables_Read_Subscription(VarAddr As String, ParType As Short, Index As Integer)
+      ' Ricevo il percorso della varibile, il tipo 
       Dim n_ret As Short = Read_subscription(VarAddr, ParType, Index)
-      'EgtOutLog("CN SIEMENS Dopo lettura abbonamento")
+      EgtOutLog(" ABBONAMENTO (Esito: " & n_ret.ToString & ") -> Address: " & VarAddr & ", Type: " & ParType.ToString & ", Index: " & Index.ToString)
    End Sub
 
    '

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 58                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -72,6 +72,10 @@ Public MustInherit Class CN_generico
       EnablePC = 54
 
       nAxes = 55
+
+      ResetStatus = 56
+
+      CPos = 57
    End Enum
 
    Public Enum Type As Short
@@ -138,6 +142,9 @@ Public MustInherit Class CN_generico
    Public d_param1 As Double
    Public sz_string As String                 ' ( MAX 200 caratteri )
 
+   ' Indice del vettore n_data associato alla lettura nMode
+   Public n_index_mode As Integer = 0
+   Public n_index_is_G24_active As Integer = 0
    Public b_data(14) As Boolean
    Public n_data(14) As Int16
    Public l_data(14) As Long
@@ -228,6 +235,10 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' gestione speciale asse C
+   Public bCPos As Boolean = False
+   Public dCPos As Double
+
    ' solo per NumOld
    Public bIsDripFeed As Boolean = False
 

NcComm/M_Fanuc.vb

@@ -1683,7 +1683,16 @@ Module M_Fanuc
       sz_Err_Msg = ""
       If Not bSimulation Then
 
-         sz_MDI_program = sz_MDI_command
+         ' Nicola: 10/05/2024
+
+         Dim sItems As String() = sz_MDI_command.Split(";")
+         Dim sNew_MDI_program As String = ""
+         For Each sItem As String In sItems
+            sNew_MDI_program &= sItem & vbLf
+         Next
+         sNew_MDI_program &= "%"
+
+         sz_MDI_program = sNew_MDI_program
 
          ' Nicola: 29/03/2023
 

NcComm/M_MMFiles.vb

@@ -19,8 +19,8 @@ Module M_MMFiles
 
 #Region " Structures"
 
-
-   <StructLayout(LayoutKind.Sequential)> _
+   ' Struttura per spedire un "comando" al Siemens
+   <StructLayout(LayoutKind.Sequential)>
    Structure SiemensSendStruct
 
       Public n_Flag As Integer
@@ -46,7 +46,7 @@ Module M_MMFiles
 
    Private SiemensSend As SiemensSendStruct
 
-
+   ' Struttura per leggere l'esito di un "comando" al Siemens
    <StructLayout(LayoutKind.Sequential)> _
    Structure SiemensRetStruct
 
@@ -75,6 +75,7 @@ Module M_MMFiles
       Public b_is_laser_ON As Boolean
       Public b_is_spindle_ON As Boolean
 
+      ' Vettore assi macchina (file SiemensComm: axes_0_M, axes_0_P)
       <MarshalAs(UnmanagedType.ByValArray, ArraySubType:=UnmanagedType.R8, SizeConst:=16)> _
       Public d_interf_axis_position() As Double
 
@@ -176,7 +177,7 @@ Module M_MMFiles
 #End Region
 
 #Region " Commands constants"
-
+   ' Elenco codici comandi per spedire programma a SiemensComm.exe
    Enum CMD As Short
 
       CMD_Download_NC_prog = 1
@@ -205,6 +206,7 @@ Module M_MMFiles
    End Enum
 
    Friend Enum VarType As Short
+      TBoolean = 0
       TInteger = 1
       TLong = 2
       TDouble = 3
@@ -343,6 +345,9 @@ Module M_MMFiles
    Function ActivateProgram(ByVal sz_part_program As String) As Short
       'EgtOutLog("ActivateProgram start dell'm_mmFiles")
 
+      EgtOutLog("Flag di comando: " & CMD.CMD_ActivateProgram.ToString)
+      EgtOutLog("Stringa di comando: " & sz_part_program.ToString)
+
       SiemensSend.n_Command = CMD.CMD_ActivateProgram
       SiemensSend.sz_string = sz_part_program
 
@@ -370,7 +375,8 @@ Module M_MMFiles
       SiemensSend.n_Command = CMD.CMD_CycleStart
 
       execute_command()
-      'EgtOutLog("CycleStart end dell'm_mmFiles")
+      ' Rimango in attesa
+      EgtOutLog(" → CycleStart")
       Return SiemensRet.n_result
 
    End Function
@@ -597,16 +603,15 @@ Module M_MMFiles
       'EgtOutLog("Write_Nc_var start dell'm_mmFiles")
       SiemensSend.n_Command = CMD.CMD_Read_NC_subscription
       SiemensSend.sz_string_2 = VarAddr ' indirizzo su CN dell' oggetto da scrivere 
-
+      EgtOutLog(" → Sottoscrivo lettura di '" & VarAddr & "'")
       SiemensSend.n_param1 = Index   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice del vettore associato '" & Index & "'")
       SiemensSend.n_param2 = ParType   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice tipo di variabile '" & ParType & "'")
       execute_command()
       m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message = SiemensRet.sz_interf_error_message
-
-      EgtOutLog("sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
-      EgtOutLog("n_result: " & SiemensRet.n_result)
+      EgtOutLog("   sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
+      EgtOutLog("   n_result: " & SiemensRet.n_result)
       Return SiemensRet.n_result
    End Function
 
@@ -765,7 +770,7 @@ Module M_MMFiles
          End If
 
          ' copio variabili in abbonamento
-         For Index As Integer = 0 To 5
+         For Index As Integer = 0 To 14
             CurrCN.b_data(Index) = SiemensRet.b_data(Index)
             CurrCN.n_data(Index) = SiemensRet.n_data(Index)
             CurrCN.l_data(Index) = SiemensRet.l_data(Index)

NcComm/M_Num.vb

@@ -53,14 +53,14 @@ Namespace Num
       Dim WithEvents objDRunTimeSystem As FXServer.DRunTimeSystem
       Dim WithEvents objDGroupManager As FXServer.DGroupManager
       Dim WithEvents objDReadELS As FXServer.DReadELS
-      ' questa è classe che serve a scrivere i dati nel PLC
+      ' questa � classe che serve a scrivere i dati nel PLC
       Dim WithEvents objDPlcVariables As FXServer.DPlcVariables
-      ' questa è la classe che serve a scrivere i dati nelle variabili E
+      ' questa � la classe che serve a scrivere i dati nelle variabili E
       Dim WithEvents objDVariables As FXServer.DVariables
       Dim WithEvents objDReadTestExectime As FXServer.DReadTestExectime
       Dim WithEvents objDPosition As FXServer.DPosition
       Dim WithEvents objDNCKParameter As FXServer.DNCKParameter
-      ' questa è la classe che serve a scrivere i comandi MDI (come ad esempio le funzioni M)
+      ' questa � la classe che serve a scrivere i comandi MDI (come ad esempio le funzioni M)
       Dim WithEvents objDMdiCommand As FXServer.DMdiCommand
       Dim WithEvents objDMainCncData As FXServer.DMainCncData
 
@@ -458,7 +458,7 @@ Namespace Num
          'sz_var_names.Add("Application.IOCONFIG_GLOBALS.Flexium_NCK.WCNC.Spindle[2].Override")     ' segnaposto per la speed override 
          'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_Vel_prog")                                 ' FEED
          'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabRPM")                                   ' Speed
-         'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabAmper")                                 ' Ampère = *0.01
+         'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabAmper")                                 ' Amp�re = *0.01
 
          ' Creo lista nomi variabili PLC da leggere
          m_nCnDataVarNum = 0
@@ -823,7 +823,7 @@ Namespace Num
 
 
         ' Only for FX Server >= 3.9.0.0 
-        ' poi in realtà ritorna sempre tipo = -1 per cui è eguale alle altre.....
+        ' poi in realt� ritorna sempre tipo = -1 per cui � eguale alle altre.....
         Private Sub objDReadELS_ValueChanged3(nHandle As Integer, value As Object, DataType As Short, Writable As Short, nerrorCode As Short) Handles objDReadELS.ValueChanged3
 
             Dim edata_type As eDatatype
@@ -996,7 +996,7 @@ Namespace Num
                   d_spindle_eff(0) = CDbl(values(n))
                Case CnData.SpeedOvr   ' (5) Potenziom. speed  = ...
                   n_spindle_override(0) = CShort(Math.Round((CDbl(values(n)) * 50 / 255) + 50))
-               Case CnData.Power      ' (6) Ampère = * 0.01
+               Case CnData.Power      ' (6) Amp�re = * 0.01
                   d_spindle_power = CDbl(CLng(values(n))) * 0.01
                   b_spindle_power_changed = True
                Case CnData.Spindle     ' (7) Stato rotazione mandrino
@@ -1095,6 +1095,9 @@ Namespace Num
                Case CnData.EnablePC     ' (54)
                   nEnablePc = CInt(values(n))
 
+               Case CnData.CPos     ' (57)
+                  dCPos = CDbl(values(n))
+
             End Select
          Next
 
@@ -1648,6 +1651,11 @@ Namespace Num
 
          n_ret = objDGeneralFunctions.ActivateProgram(l_glbPartProgramNumber, 0)
 
+         If n_ret <> 0 Then
+            EgtOutLog("Error: ActivateProgram error : " + n_ret.ToString())
+            Return n_ret
+         End If
+
          Return n_ret
 
       End Function
@@ -1695,17 +1703,24 @@ Namespace Num
          Dim ngroup0 As Short = 0
          Dim nTimeOut As Integer = 0
          bSetModeDone = False
+
+         ' ' Per prima versione FLEXIUM (3.5.040 - 2013)
+         ' EgtOutLog("Scrittura modalità (" & nmode.ToString & ")")
+         ' objDGeneralFunctions.WriteCncMode(nmode, ngroup0)
+         ' Return 0
+
+         ' Per ultime versioni FLEXIUM
          objDGeneralFunctions.WriteCncMode2(nHandle, nmode, ngroup0)
          While Not bSetModeDone And nTimeOut < SHORTSLEEPCOUNT
             System.Threading.Thread.Sleep(SHORTSLEEPTIME)
             nTimeOut += 1
          End While
          If Not bSetModeDone Then
-            EgtOutLog("Errore cambio modalità in MDI: " & TIMEOUT)
+            EgtOutLog("Errore cambio modalità in MDI: " & TIMEOUT)
             Return TIMEOUT   'Errore di timeout
          End If
          If nSetModeResult <> 0 Then
-            EgtOutLog("Errore 2 cambio modalità in MDI: " & nSetModeResult)
+            EgtOutLog("Errore 2 cambio modalità in MDI: " & nSetModeResult)
          End If
          Return nSetModeResult
 

NcComm/M_Num_old.vb

@@ -289,6 +289,7 @@ Namespace Num
 
          ' Stringhe valide : "COM" o "XIP01, 0, 10, 0, 0, 0"
          Dim nret As Integer = NC_connect(m_szCnDataVar(CnData.Comm))
+         EgtOutLog(" → Risultatao apertura connessiione: " & nret)
          If nret <> 0 Then Return False
 
          n_state = 2
@@ -583,7 +584,6 @@ Namespace Num
       End Function
 
       Function Read_machine_pos() As Int16
-
          Dim nret As Int16
          Dim i, n As Integer
 
@@ -1297,14 +1297,14 @@ Namespace Num
       End Function
 
       Function VerifyBusy() As eStateType
-         For I As Integer = 0 To 50
+         For I As Integer = 0 To 150
             If global_state <> eStateType.READY Then
                System.Threading.Thread.Sleep(SLEEP_TIME)
             Else
                Exit For
             End If
          Next
-
+         EgtOutLog("eStateType: " & global_state.ToString & "  -- if eStateType=0 it means READY")
          Return global_state
 
       End Function

OmagCUT.vbproj

@@ -115,6 +115,9 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="DotNetZip">
+      <HintPath>..\..\EgtProg\OmagCUT\DotNetZip.dll</HintPath>
+    </Reference>
     <Reference Include="EgtPHOTOLib">
       <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
     </Reference>
@@ -142,9 +145,6 @@
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXServer.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
-    <Reference Include="Ionic.Zip">
-      <HintPath>..\..\EgtProg\OmagCUT\Ionic.Zip.dll</HintPath>
-    </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
     <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
@@ -174,9 +174,21 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelectTableWD.xaml.vb">
+      <DependentUpon>SelectTableWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="CadCuts\ChooseTestToolWD.xaml.vb">
+      <DependentUpon>ChooseTestToolWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="CadCuts\ChangeToolWD.xaml.vb">
+      <DependentUpon>ChangeToolWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
       <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelParkIndWD.xaml.vb">
+      <DependentUpon>SelParkIndWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\ControlsDirectCutUC.xaml.vb">
       <DependentUpon>ControlsDirectCutUC.xaml</DependentUpon>
@@ -184,6 +196,9 @@
     <Compile Include="DirectCuts\ControlsDirectCutUC1.xaml.vb">
       <DependentUpon>ControlsDirectCutUC1.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DirectCuts\CustomGridUC.xaml.vb">
+      <DependentUpon>CustomGridUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
     </Compile>
@@ -206,9 +221,18 @@
     <Compile Include="DrawImport\FiloTopUC.xaml.vb">
       <DependentUpon>FiloTopUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DrawImport\SideAngleOneForAllWindow.xaml.vb">
+      <DependentUpon>SideAngleOneForAllWindow.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\UnderDrillUC.xaml.vb">
       <DependentUpon>UnderDrillUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="LicenseWindow.xaml.vb">
+      <DependentUpon>LicenseWindow.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Machine\Alarms2PageUC.xaml.vb">
+      <DependentUpon>Alarms2PageUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Machine\AlarmsPageUC.xaml.vb">
       <DependentUpon>AlarmsPageUC.xaml</DependentUpon>
     </Compile>
@@ -441,10 +465,26 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\SelectTableWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="CadCuts\ChooseTestToolWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="CadCuts\ChangeToolWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="CadCuts\SelParkIndWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\ControlsDirectCutUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -453,6 +493,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\CustomGridUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -481,10 +525,22 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="DrawImport\SideAngleOneForAllWindow.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\UnderDrillUC.xaml">
       <SubType>Designer</SubType>
       <Generator>XamlIntelliSenseFileGenerator</Generator>
     </Page>
+    <Page Include="LicenseWindow.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Machine\Alarms2PageUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Machine\AlarmsPageUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -1346,6 +1402,51 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\icone-tagli-1HQ.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\4.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\5.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Muovi-grezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\ON_OFF-REG.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Move-Spot-Reg.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %282%29.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %283%29.png" />
+    <Resource Include="Resources\NewIcons\RawHeight.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\LightArrowOff.png" />
+    <Resource Include="Resources\NewIcons\LightArrowOn.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Park_Busy.png" />
+    <Resource Include="Resources\NewIcons\icoRight-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoLeft-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoBack-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoFront-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoBottom-3D.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDictionary.xaml

@@ -81,6 +81,7 @@
    <system:Double x:Key="FontSize_LowerBarOverride">18.6</system:Double>   <!--14pt-->
    <system:Double x:Key="FontSize_UnitOfMeasure">13.3</system:Double>      <!--10pt-->
    <system:Double x:Key="FontSize_GroupBoxHeader">22</system:Double>
+   <system:Double x:Key="FontSize_GroupBoxHeaderWJ">18</system:Double>
    <system:Double x:Key="ComboBox_Height">40</system:Double>
    <system:Double x:Key="ComboBoxTextBlock_Height">40</system:Double>
    <system:Double x:Key="ArrowImage_Height">65</system:Double>
@@ -133,6 +134,7 @@
     <BitmapImage x:Key="PhotoImg" UriSource="Resources/Photo.png"></BitmapImage>
     <BitmapImage x:Key="RawPartImg" UriSource="Resources/RawPart.png"></BitmapImage>
     <BitmapImage x:Key="RawProbeImg" UriSource="Resources/RawProbe.png"></BitmapImage>
+    <BitmapImage x:Key="RawHeightImg" UriSource="Resources/NewIcons/RawHeight.png"></BitmapImage>
     <BitmapImage x:Key="RightArrowImg" UriSource="Resources/RightArrow.png"></BitmapImage>
     <BitmapImage x:Key="SawProbeImg" UriSource="Resources/SawProbe.png"></BitmapImage>
     <BitmapImage x:Key="SendImg" UriSource="Resources/Send.png"></BitmapImage>
@@ -171,6 +173,7 @@
     <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
     <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
     <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Muovi-grezzoImg" UriSource="Resources/NewIcons/Muovi-grezzo.png"></BitmapImage>
     <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
@@ -225,6 +228,7 @@
     <BitmapImage x:Key="QualityWJImg" UriSource="Resources/NewIcons/Quality.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-REGImg" UriSource="Resources/NewIcons/ON_OFF-REG.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
@@ -240,6 +244,7 @@
     <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
+    <BitmapImage x:Key="Move-Spot-RegImg" UriSource="Resources/NewIcons/Move-Spot-Reg.png"></BitmapImage>
 
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
 
@@ -334,7 +339,36 @@
       </Style.Triggers>
    </Style>
 
-    <Style x:Key="OmagCut_Button_Wrap" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+   <Style x:Key="Color_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+      <Setter Property="BorderThickness" Value="{StaticResource BorderThickness}"/>
+      <Setter Property="project:ButtonExtensions.CornerRadius" Value="{StaticResource Button_CornerRadius}"/>
+      <Setter Property="Margin" Value="{StaticResource Button_MarginThickness}"/>
+      <Setter Property="Padding" Value="5"/>
+      <Setter Property="Width" Value="60"/>
+      <Setter Property="Height" Value="35"/>
+      <Setter Property="HorizontalContentAlignment" Value="Center"/>
+      <Setter Property="VerticalContentAlignment" Value="Center"/>
+      <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+      <Style.Triggers>
+         <Trigger Property="IsMouseOver" Value="True">
+            <Setter Property="Background" Value="#FFB8C3CD"/>
+         </Trigger>
+         <Trigger Property="IsPressed" Value="True">
+            <Setter Property="OpacityMask" Value="#33FF0000"/>
+         </Trigger>
+         <Trigger Property="ToggleButton.IsChecked" Value="True">
+            <Setter Property="Background" Value="Transparent"/>
+         </Trigger>
+         <Trigger Property="IsEnabled" Value="False">
+            <Setter Property="Background" Value="#FFF4F4F4"/>
+            <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+            <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+         </Trigger>
+      </Style.Triggers>
+   </Style>
+
+
+   <Style x:Key="OmagCut_Button_Wrap" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
         <Setter Property="ContentTemplate" Value="{StaticResource Button_DataTemplate_Wrap}" />
         <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}" />
     </Style>
@@ -791,7 +825,13 @@
       <Setter Property="Margin" Value="0,8,6,4"/>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Style di un immagine in al posto di una text-->
+    <Style x:Key="OmagCut_TextIcon" TargetType="{x:Type Image}" >
+        <Setter Property="Width" Value="30"/>
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!-- ScrollBar & it's component (RepeatButton, Thumb) -->
 
@@ -1184,6 +1224,14 @@
    </Style>
 
    <Style x:Key="OmagCut_CenteredLowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_Black}"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="HorizontalAlignment" Value="Center"/>
+   </Style>
+
+   <Style x:Key="OmagCut_ErrorTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">
+      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="FontStyle" Value="Italic"/>
       <Setter Property="VerticalAlignment" Value="Center"/>
       <Setter Property="HorizontalAlignment" Value="Center"/>
    </Style>
@@ -1210,13 +1258,14 @@
    </Style>
 
    <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_Black}"/>
       <Setter Property="Keyboard" Value="Calculator"/>
       <Setter Property="IsLength" Value="True"/>
       <Setter Property="KeyboardDimension" Value="300"/>
    </Style>
 
     <Style x:Key="OmagCut_CalculatorParamWjTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
-        <Setter Property="Width" Value="80"/>
+        <Setter Property="Width" Value="70"/>
         <Setter Property="Keyboard" Value="Calculator"/>
         <Setter Property="KeyboardDimension" Value="300"/>
         <Setter Property="IsHitTestVisible" Value="False" />
@@ -1263,11 +1312,14 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
-        <Setter Property="Background" Value="White"/>
+      <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
+      <Setter Property="TextAlignment" Value="Center"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />
-   </Style>
+      <Setter Property="ToolTipService.ShowOnDisabled" Value="True"/>
+      <Setter Property="ToolTip"  Value="{Binding RelativeSource={RelativeSource Self}, Path=Text}"/>
+    </Style>
 
    <!-- ______________________________________________________________________________________________________________________ -->
 
@@ -2733,5 +2785,16 @@
    </Style>
 
    <!-- *************************************************************************** -->
+   
+   <!--Stile Rettangolo in SplitPaceUC-->
+   <Style x:Key="Rect_SplitPage" TargetType="{x:Type Rectangle}">
+      <Setter Property="Fill" Value="{Binding SawColor}"/>
+      <Setter Property="Stroke" Value="Black"/>
+      <Setter Property="HorizontalAlignment" Value="Center"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="Height" Value="20"/>
+      <Setter Property="Width" Value="5"/>
+      <Setter Property="StrokeThickness" Value="0.5"/>
+   </Style>
 
 </ResourceDictionary>

Options/OptionsPageUC.xaml.vb

@@ -1304,6 +1304,8 @@ Public Class OptionsPageUC
       End If
       Try
          Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
+            zip.AlternateEncodingUsage = Ionic.Zip.ZipOption.Always
+            zip.AlternateEncoding = Text.Encoding.UTF8
             ' aggiungo file macchine
             For Each sMachineName As String In Machines
                Dim sMachineDir As String = m_MainWindow.GetMachinesRootDir() & "\" & sMachineName

Project/AddToDataBaseUC.xaml.vb

@@ -91,7 +91,7 @@ Public Class AddToDataBaseUC
          WritePrivateProfileString(S_SCRAPS, K_LASTBLOCK, EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock, m_OmagPhotoWD.m_MainWindow.GetIniFile())
       End If
       ' aggiorno il testo del messaggio "Add" → "Save"
-      AddBtn.Content = "Save"
+      AddBtn.Content = EgtMsg(91252)      ' Save
 
       ' notifico che da ora la lastra inserita è in modalità di modifica (non salvo la lastra come nuova, ma la sovrascrivo come in modifica)
       EgtPHOTOLib.PhotoMap.refProjectVM.SetSelProjectMode(ProjectSlabVM.ProjectModeOpt.DETAIL)

Project/CurrentProjectPageUC.xaml

@@ -7,79 +7,87 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280"
    Initialized="CurrentProjectPage_Initialized" Loaded="CurrentProjectPage_Loaded">
- 
-   <!-- Definizione della CurrentProjectPage -->
-   <Grid Name="CurrentProjectPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
 
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-
-      </Grid>
-
-      <!-- Definizione della Grid laterale -->
-        <Grid Grid.RowSpan="3">
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="7*"/>
+    <!-- Definizione della CurrentProjectPage -->
+    <Grid Name="CurrentProjectPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid con le caratteristiche del progetto -->
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+        </Grid>
+
+        <!-- Definizione della Grid laterale -->
+        <Grid Grid.RowSpan="3">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!-- Definizione della Grid con le caratteristiche del progetto -->
             <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_MachiningBorder}" Grid.Row="0" >
                 <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="MaterialTxBl" Grid.Row="0"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="HeightTxBl" Grid.Row="1"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Width="100"
+                    <Image Name="MaterialTxBl" 
+                           Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Margin="0,0,10,0"
+                   TextAlignment="Right" Style="{DynamicResource OmagCut_FixedTextBox}"/>
+                    <Image Name="HeightTxBl" Grid.Row="1"
+                       Source="{DynamicResource RawHeightImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                   <Image Name="ToolTxBl" Grid.Row="2"
+                       Source="{DynamicResource DB-utensiliImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                    <Image Name="MachiningTxBl" Grid.Row="3"
+                       Source="{DynamicResource DB-lavorazioniImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
-               <TextBlock Name="ToolTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="MachiningTxBl" Grid.Row="3"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
 
-            </Grid>
+                </Grid>
 
-         </Border>
+            </Border>
 
-         <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
+           
+                <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
 
-         <Border Name="OutMessageBrd" Grid.Row="2" >
-            <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
+            <Border Name="OutMessageBrd" Grid.Row="2" >
+                <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
                Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         </Border>
+            </Border>
 
-      </Grid>
+        </Grid>
 
-   </Grid>
+        <Grid Name="SceneHostGrid" Grid.Row="1" Grid.Column="1">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="6*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Project/CurrentProjectPageUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports System.IO
+Imports System.Security.Cryptography
 Imports System.Windows.Interop
 Imports EgtUILib
 Imports EgtWPFLib
@@ -7,8 +8,10 @@ Imports EgtWPFLib5
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    ' Dichiarazione delle Page UserControl
@@ -17,7 +20,8 @@ Public Class CurrentProjectPageUC
    Private m_bFirst As Boolean = True
    ' Dichiarazione Scene
    Friend WithEvents CurrentProjectScene As New Scene
-   Private CurrentProjectSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
+   ' Nella pagina Nest gestisco la dimensione della scena per visualizzare la lista dei parcheggi
+   Public CurrentProjectSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
    ' Identificativo progetto corrente
    Private m_nCurrProj As Integer = 0
    ' Dati del grezzo
@@ -53,15 +57,17 @@ Public Class CurrentProjectPageUC
 
       'Assegnazione scena all'host e posizionamento nella PlacePageGrid
       CurrentProjectSceneHost.Child = CurrentProjectScene
-      CurrentProjectSceneHost.SetValue(Grid.ColumnProperty, 1)
-      CurrentProjectSceneHost.SetValue(Grid.RowProperty, 1)
-      Me.CurrentProjectPageGrid.Children.Add(CurrentProjectSceneHost)
+      CurrentProjectSceneHost.SetValue(Grid.ColumnProperty, 0)
+      CurrentProjectSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+      ' CurrentProjectSceneHost.SetValue(Grid.RowProperty, 1)
+      'Me.CurrentProjectPageGrid.Children.Add(CurrentProjectSceneHost)
+      Me.SceneHostGrid.Children.Add(CurrentProjectSceneHost)
 
-      'Imposto i messaggi letti dal file dei messaggi
-      MaterialTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 9)       'Material - Materiale
-      HeightTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 5)         'Height - Spessore
-      ToolTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
-      MachiningTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
+      'Imposto i messaggi letti dal file dei messaggi      
+      MaterialTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 9)     'Material - Materiale
+      HeightTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 5)       'Height - Spessore
+      ToolTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
+      MachiningTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
 
    End Sub
 
@@ -107,7 +113,7 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Or m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_LIGHT)
          If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
@@ -118,11 +124,25 @@ Public Class CurrentProjectPageUC
 #Else
             ' Se manca la chiave
             If m_MainWindow.GetKeyLevel() = -1 Or m_MainWindow.GetKeyLevel() = -2 Then
-               EgtOutLog("Missing Dongle")
-               ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
-               Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
-               Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               If Not EgtGetNetHwKey() Then
+                  EgtOutLog("Missing Dongle")
+                  ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
+                  Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
+                  Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               Else
+                  EgtOutLog("NetDongle is full")
+                  ' Box di avviso slot chiave di rete occupato : "Chiave di Rete completamente occupata. \n Uscire dal programma su un altro PC." "Errore"
+                  Dim sText As String = EgtMsg(10110) & vbCrLf & EgtMsg(10111)
+                  Dim sTitle As String = EgtMsg(10101)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               End If
+            ElseIf m_MainWindow.GetKeyLevel() = -9 Then
+               EgtOutLog("Missing Link with Net Dongle")
+               ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione." "Errore"
+               Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
+               Dim sTitle As String = EgtMsg(10101)
+               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
                ' Altrimenti manca la licenza
             Else
                EgtOutLog("Problems with Licence")
@@ -176,7 +196,8 @@ Public Class CurrentProjectPageUC
          ' Inizializzo gestore lavorazioni
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
-
+         Dim bOrtoGraphic As Boolean = (GetPrivateProfileInt(S_SCENE, K_ORTOGRAPHIC, 1, m_MainWindow.GetIniFile()) <> 0)
+         EgtSetCameraType(bOrtoGraphic, True)
          ' creo nuovo progetto
          m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
@@ -196,9 +217,17 @@ Public Class CurrentProjectPageUC
       Else
          MaterialTxBx.Text = "-----"
       End If
-      ' Visualizzo lama e lavorazione correnti
-      ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+
+      ' se macchina waterjet e senza una lama corrente impostata allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSaw) Then
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+
    End Sub
 
    Public Sub StartProgram()
@@ -276,7 +305,7 @@ Public Class CurrentProjectPageUC
       ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
       If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
          ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+         If GetProjectType() <> PRJ_TYPE.FRAMES And Not m_MainWindow.m_OnlyFrame Then
             CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
             m_MainWindow.CadCutBtn.IsChecked = True
@@ -314,6 +343,10 @@ Public Class CurrentProjectPageUC
       RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.MouseDoubleClick
+      RaiseEvent OnMouseDownScene_DoubleClick(sender, e)
+   End Sub
+
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
       RaiseEvent OnMouseMoveScene(sender, e)
    End Sub
@@ -326,6 +359,10 @@ Public Class CurrentProjectPageUC
       SetInfoMessage(DistToString(vtDist))
    End Sub
 
+   Private Sub OnMyKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles CurrentProjectScene.KeyDown
+      RaiseEvent OnKeyCancelDownScene(sender, e)
+   End Sub
+
    ' Gestione progetto
 
    Friend Sub SetNextProjectIndex()
@@ -399,15 +436,29 @@ Public Class CurrentProjectPageUC
       ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
       m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
+      Dim nIdList As New List(Of Integer)
+      Dim nStatList As New List(Of Integer)
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
+         ' Forzo lo stato per avere il giusto calcolo delle posizioni per evitare sovrapposizioni
+         EgtSetStatus(nId2, GDB_ST.ON_)
          ' Inserisco correttamente in parcheggio
          m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
+         ' Aggiorno lo stato di visualizzazione
+         Dim nInfoStatus As Integer = 1
+         ' Salvo lo stato (per gestire la navigazione)
+         EgtGetInfo(nId2, INFO_PARKSTATUS, nInfoStatus)
+         ' Salvo l'Id e lo stato da impostare successivamente al posizionamento
+         nIdList.Add(nId2)
+         nStatList.Add(nInfoStatus)
          ' Notifica a WeinMatching per modifica Id
          VeinMatching.UpdatePart(nId2)
          ' Passo al pezzo successivo
          nId2 = EgtGetNextPart(nId2)
       End While
+      For IndIndex As Integer = 0 To nIdList.Count - 1
+         EgtSetStatus(nIdList(IndIndex), nStatList(IndIndex))
+      Next
       ' Aggiorno Aree totale e da lavorare dei pezzi
       SetTotalArea(dTotArea)
       UpdateToProduceArea()
@@ -422,7 +473,7 @@ Public Class CurrentProjectPageUC
       Return True
    End Function
 
-   Friend Function AdjustAdditionalTable( Optional bForced As Boolean = False) As Boolean
+   Friend Function AdjustAdditionalTable(Optional bForced As Boolean = False) As Boolean
       ' Recupero altezza sottotavola corrente
       Dim nFixtId As Integer = EgtGetFirstNameInGroup(EgtGetFirstMachGroup(), MACH_FIXT_GROUP)
       Dim nAddTabId As Integer = EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE)
@@ -434,7 +485,10 @@ Public Class CurrentProjectPageUC
       End If
       ' Se valore cambiato, aggiorno...
       Dim dDeltaZ As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable - dCurrAddTab
-      If Math.Abs(dDeltaZ) > EPS_SMALL Or bForced Then
+      Dim bChanged As Boolean = (Math.Abs(dDeltaZ) > EPS_SMALL)
+      If bChanged Or bForced Then
+         Dim bOldEnMod As Boolean = EgtGetEnableModified()
+         If Not bChanged AndAlso bOldEnMod Then EgtDisableModified()
          AddAdditionalTable()
          UpdateAllRawsZ(dDeltaZ)
          If GetPhoto() <> GDB_ID.NULL Then
@@ -444,12 +498,13 @@ Public Class CurrentProjectPageUC
                ShowPhoto(False)
                Dim nRawGrpId As Integer = EgtGetFirstRawPart()
                While nRawGrpId <> GDB_ID.NULL
-                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup( nRawGrpId, NAME_RAW_SOLID)
-                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName( nRawSolidId, PHOTO_NAME)
-                  nRawGrpId = EgtGetNextRawPart( nRawGrpId)
+                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(nRawGrpId, NAME_RAW_SOLID)
+                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName(nRawSolidId, PHOTO_NAME)
+                  nRawGrpId = EgtGetNextRawPart(nRawGrpId)
                End While
             End If
          End If
+         If Not bChanged AndAlso bOldEnMod Then EgtEnableModified()
       End If
       Return True
    End Function
@@ -469,12 +524,14 @@ Public Class CurrentProjectPageUC
       ' Nuova geometria
       Dim nAddTabId As Integer = GDB_ID.NULL
       ' Se esiste geometria di riferimento
-      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      Dim sNameTable As String = MAIN_TAB
+      EgtGetTableName(sNameTable)
+      Dim nRefAddTabId = EgtGetFirstNameInGroup(EgtGetFirstNameInGroup(EgtGetTableId(sNameTable), "SOLID"), MACH_ADD_TABLE)
       If nRefAddTabId <> GDB_ID.NULL Then
-         nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
-         EgtSetStatus( nAddTabId, GDB_ST.ON_)
-         EgtScale( nAddTabId, new Frame3d( ptMin), 1, 1, dAddTable / 10)
-      ' altrimenti la creo
+         nAddTabId = EgtCopyGlob(nRefAddTabId, nFixtId)
+         EgtSetStatus(nAddTabId, GDB_ST.ON_)
+         EgtScale(nAddTabId, New Frame3d(ptMin), 1, 1, dAddTable / 10)
+         ' altrimenti la creo
       Else
          ' Aggiungo sovratavola nel gruppo dei bloccaggi
          ptMax.z -= DELTAZ_ADDTAB
@@ -485,7 +542,7 @@ Public Class CurrentProjectPageUC
       ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
-      EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
+      If nRefAddTabId = GDB_ID.NULL Then EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
       EgtSetInfo(nAddTabId, KEY_ADD_TABLE, dAddTable)
       Return True
    End Function
@@ -542,6 +599,9 @@ Public Class CurrentProjectPageUC
       Else
          EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHomeCurrMach, 0))
       End If
+
+      'SelParkIndWD.UpdateViewOnParkInd(False)
+
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -566,8 +626,8 @@ Public Class CurrentProjectPageUC
       End If
       ' Se la macchina del file è quella impostata
       If String.Compare(sFileMachine, m_MainWindow.GetCurrMachine(), True) = 0 Then
-         AdjustAdditionalTable( True)
-      ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
+         AdjustAdditionalTable(True)
+         ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
       Else
          ' Emetto messaggio
          Dim sOut As String = EgtMsg(90320) & " (" & sFileMachine & ")"        ' Macchina diversa
@@ -717,6 +777,17 @@ Public Class CurrentProjectPageUC
          ' Notifico a foto il cambio di path
          EgtChangePhotoPath(nPhotoId, sNewPhoto)
       End If
+
+      '--------------------------------------------------------------------------------
+      If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+         ' Gestione visulizzazione lista pezzi in parcheggio
+         Dim sNewFileName As String = SelParkIndWD.GetPathCurrProj()
+         SelParkIndWD.CopyImgSvg(sPath)
+         SelParkIndWD.sActualProj = String.Empty
+         SelParkIndWD.CopyImgSvg(sNewFileName)
+      End If
+      '--------------------------------------------------------------------------------
+
       ' Se assente, inserisco contrassegno di progetto OmagCut valido
       AddProjectMark()
       ' Eseguo
@@ -730,15 +801,15 @@ Public Class CurrentProjectPageUC
       Return True
    End Function
 
-   Friend Function ExportProject( sPath As String) As Boolean
+   Friend Function ExportProject(sPath As String) As Boolean
       ' Copio eventuale fotografia
       Dim nPhotoId As Integer = GetPhoto()
       If nPhotoId <> GDB_ID.NULL Then
          ' Path originale
          Dim sPhoto As String = String.Empty
-         EgtGetPhotoPath( nPhotoId, sPhoto)
+         EgtGetPhotoPath(nPhotoId, sPhoto)
          ' Nuova path
-         Dim sNewPhoto As String = Path.ChangeExtension( sPath, Path.GetExtension( sPhoto))
+         Dim sNewPhoto As String = Path.ChangeExtension(sPath, Path.GetExtension(sPhoto))
          ' Se diverse, eseguo copia
          If Not String.Equals(sPhoto, sNewPhoto, StringComparison.InvariantCultureIgnoreCase) Then
             Try
@@ -753,7 +824,7 @@ Public Class CurrentProjectPageUC
       ' Se assente, inserisco contrassegno di progetto OmagCut valido
       AddProjectMark()
       ' Eseguo copia
-      Return SaveFile( sPath)
+      Return SaveFile(sPath)
    End Function
 
    Friend Function GetCurrentProject() As Integer
@@ -840,7 +911,7 @@ Public Class CurrentProjectPageUC
          EgtSetName(nMarkId, NAME_PROJMARK)
          EgtSetLevel(nMarkId, GDB_LV.SYSTEM)
          EgtSetInfo(nMarkId, INFO_REDUCEDCUT, nReducedCut)
-      ' altrimenti, aggiorno il flag dei tagli ridotti
+         ' altrimenti, aggiorno il flag dei tagli ridotti
       Else
          Dim nMarkReducedCut As Integer = 0
          If Not EgtGetInfo(nMarkId, INFO_REDUCEDCUT, nMarkReducedCut) OrElse nMarkReducedCut <> nReducedCut Then
@@ -996,10 +1067,16 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Friend Sub UpdateMachiningTxBx()
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      ' se macchina waterjet e senza uscita lama allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
    End Sub
 
-  ' Gestione fotografia della lastra (compreso riconoscimento contorno)
+   ' Gestione fotografia della lastra (compreso riconoscimento contorno)
 
    Friend Function LoadPhoto(sPath As String) As Boolean
       ' Verifico esistenza file immagine
@@ -1293,23 +1370,23 @@ Public Class CurrentProjectPageUC
 
    ' Gestione area pezzi totale e area pezzi da produrre
 
-   Friend Function SetTotalArea( dTotArea As Double) As Boolean
+   Friend Function SetTotalArea(dTotArea As Double) As Boolean
       Dim nMarkId As Integer = AddProjectMark()
       Return EgtSetInfo(nMarkId, INFO_TOTAREA, dTotArea)
    End Function
 
-   Friend Function UpdateTotalArea( dNewArea As Double) As Boolean
+   Friend Function UpdateTotalArea(dNewArea As Double) As Boolean
       Dim nMarkId As Integer = AddProjectMark()
       Dim dTotArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOTAREA, dTotArea)
-      dTotArea = Math.Max( dTotArea + dNewArea, 0)
+      EgtGetInfo(nMarkId, INFO_TOTAREA, dTotArea)
+      dTotArea = Math.Max(dTotArea + dNewArea, 0)
       Return EgtSetInfo(nMarkId, INFO_TOTAREA, dTotArea)
    End Function
 
    Friend Function GetTotalArea() As Double
       Dim nMarkId As Integer = AddProjectMark()
       Dim dTotArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOTAREA, dTotArea)
+      EgtGetInfo(nMarkId, INFO_TOTAREA, dTotArea)
       Return dTotArea
    End Function
 
@@ -1317,17 +1394,17 @@ Public Class CurrentProjectPageUC
       Dim dToProdArea As Double = 0
       ' Se programma non ancora inviato al CN, ciclo sui pezzi nella lastra
       If GetProjectNcProgSent() = 0 Then
-         Dim nPartInRawId As Integer = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+         Dim nPartInRawId As Integer = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
          While nPartInRawId <> GDB_ID.NULL
-            dToProdArea += GeomCalc.GetPartArea( nPartInRawId)
-            nPartInRawId = EgtGetNextPartInRawPart( nPartInRawId)
+            dToProdArea += GeomCalc.GetPartArea(nPartInRawId)
+            nPartInRawId = EgtGetNextPartInRawPart(nPartInRawId)
          End While
       End If
       ' Ciclo sui pezzi in parcheggio
       Dim nPartId As Integer = EgtGetFirstPart()
       While nPartId <> GDB_ID.NULL
-         dToProdArea += GeomCalc.GetPartArea( nPartId)
-         nPartId = EgtGetNextPart( nPartId)
+         dToProdArea += GeomCalc.GetPartArea(nPartId)
+         nPartId = EgtGetNextPart(nPartId)
       End While
       Dim nMarkId As Integer = AddProjectMark()
       Return EgtSetInfo(nMarkId, INFO_TOPRODAREA, dToProdArea)
@@ -1336,16 +1413,16 @@ Public Class CurrentProjectPageUC
    Friend Function GetToProduceArea() As Double
       Dim nMarkId As Integer = AddProjectMark()
       Dim dToProdArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOPRODAREA, dToProdArea)
+      EgtGetInfo(nMarkId, INFO_TOPRODAREA, dToProdArea)
       Return dToProdArea
    End Function
 
    Friend Sub ShowAreas()
       ' Recupero il gruppo di Mark e lo svuoto
       Dim nMarkId As Integer = AddProjectMark()
-      EgtEmptyGroup( nMarkId)
+      EgtEmptyGroup(nMarkId)
       ' Se non sono da visualizzare esco
-      if GetPrivateProfileInt( S_STATISTICS, K_SHOWAREAS, 0, m_MainWindow.GetMachIniFile()) = 0 Then Return
+      If GetPrivateProfileInt(S_STATISTICS, K_SHOWAREAS, 0, m_MainWindow.GetMachIniFile()) = 0 Then Return
       ' Recupero dati
       Dim dTotArea As Double = GetTotalArea()
       Dim dToProdArea As Double = GetToProduceArea()
@@ -1357,23 +1434,29 @@ Public Class CurrentProjectPageUC
       End If
       ' Scritte
       Const TEXT_DIST As Double = 100
-      Dim ptIns As New Point3d( b3Tab.Center().x, b3Tab.Max().y + TEXT_DIST, b3Tab.Max().z)
+      Dim ptIns As New Point3d(b3Tab.Center().x, b3Tab.Max().y + TEXT_DIST, b3Tab.Max().z)
       Dim dCoeff As Double = 1.0 / 1000000.0
       Dim sUnit As String = " m²"
       If Not EgtUiUnitsAreMM() Then
-         dCoeff = 1.0 / ( 12 * ONEINCH * 12 * ONEINCH)
+         dCoeff = 1.0 / (12 * ONEINCH * 12 * ONEINCH)
          sUnit = " ft²"
       End If
-      Dim sText As String = EgtMsg( 90328) & " " & DoubleToString( dTotArea * dCoeff, 3) & sUnit &  "   " &
-                            EgtMsg( 90329) & " " & DoubleToString( dToProdArea * dCoeff, 3) & sUnit
-      Dim nText As Integer = EgtCreateTextAdv( nMarkId, ptIns, 0, sText, "", 500, False, 100, 1, 0, INS_POS.MC)
-      EgtSetColor( nText, New Color3d( 0, 0, 0))
+      Dim sText As String = EgtMsg(90328) & " " & DoubleToString(dTotArea * dCoeff, 3) & sUnit & "   " &
+                            EgtMsg(90329) & " " & DoubleToString(dToProdArea * dCoeff, 3) & sUnit
+      Dim nText As Integer = EgtCreateTextAdv(nMarkId, ptIns, 0, sText, "", 500, False, 100, 1, 0, INS_POS.MC)
+      EgtSetColor(nText, New Color3d(0, 0, 0))
    End Sub
-
-   Friend Sub SetAreasStatus( bShow As Boolean)
+   Friend Sub SetAreasStatus(bShow As Boolean)
       Dim nMarkId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK)
       If nMarkId = GDB_ID.NULL Then Return
-      EgtSetStatus( nMarkId, If( bShow, GDB_ST.ON_, GDB_ST.OFF))
+
+      ' Disabilito impostazione modificato
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      ' Cambio stato visualizzazione
+      EgtSetStatus(nMarkId, If(bShow, GDB_ST.ON_, GDB_ST.OFF))
+      ' Se necessario riabilito impostazione modificato
+      If bOldEnMod Then EgtEnableModified()
    End Sub
 
    ' Gestione messaggi in interfaccia

Project/OmagPhotoWD.xaml.vb

@@ -145,7 +145,7 @@ Public Class OmagPhotoWD
          m_AddToDataBaseUC.ThicknessTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness
          m_AddToDataBaseUC.ProjectTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo
          ' aggiorno il testo del messaggio "Add" → "Save"
-         m_AddToDataBaseUC.AddBtn.Content = "Save"
+         m_AddToDataBaseUC.AddBtn.Content = EgtMsg(91252)      ' Save
          Return
       End If
       ' inizializzo i campi

Project/OpenPageUC.xaml

@@ -6,33 +6,40 @@
    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"          
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="OpenPage_Initialized" Loaded="OpenPage_Loaded" Unloaded="OpenPage_Unloaded">
-      
-   <!-- Definizione della OpenPage -->
-   <Border>
-      <Grid Name="OpenPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="8*"/>
+
+    <!-- Definizione della OpenPage -->
+    <Border>
+        <Grid Name="OpenPageGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="8*"/>
                 <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
-         
-         <!-- Definizione della Grid Superiore -->
-         <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="5*"/>
-               <ColumnDefinition Width="7*"/>
-            </Grid.ColumnDefinitions>
-       
-         </Grid>
 
-         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            
-          <Grid Grid.Row="1" Grid.RowSpan="2">
+            <!-- Definizione della Grid Superiore -->
+            <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="5*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+            <Grid Name="SceneHostGrid" Grid.Row="2" Grid.Column="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="6*"/>
+                    <ColumnDefinition Width="1.2*"/>
+                </Grid.ColumnDefinitions>
+            </Grid>
+
+            <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+
+            <Grid Grid.Row="1" Grid.RowSpan="2">
                 <Grid.RowDefinitions>
                     <RowDefinition Height="6.5*"/>
                     <RowDefinition Height="0.65*"/>
@@ -53,39 +60,39 @@
                 </Grid>
 
             </Grid>
-          
-         <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
-            <TextBlock Name="MessageTxBx"  TextAlignment="Center"
+
+            <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <TextBlock Name="MessageTxBx"  TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         </Border>
-         
-         <!-- Definizione della Grid Inferiore per i Button V e X -->
-         <Grid Name="BottomButtonsGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="6*"/>
-               <ColumnDefinition Width="3*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+            </Border>
 
-            <Button Name="BarCodeBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <!-- Definizione della Grid Inferiore per i Button V e X -->
+            <Grid Name="BottomButtonsGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="6*"/>
+                    <ColumnDefinition Width="3*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="BarCodeBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                     <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+                </Button>
 
-            <Button Name="OkBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Button Name="OkBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-            </Button>
-            <Button Name="ExitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-            </Button>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

Project/OpenPageUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class OpenPageUC
 
    'Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_SelParkInd As SelParkIndWD
 
    'Dichiarazione dello UserControl SceneButtons
    Private m_SceneButtons As SceneButtonsUC
@@ -35,11 +36,12 @@ Public Class OpenPageUC
 
       ' Assegnazione scena all'host e posizionamento nella OpenPageGrid
       OpenSceneHost.Child = OpenScene
-      OpenSceneHost.SetValue(Grid.ColumnProperty, 1)
-      OpenSceneHost.SetValue(Grid.RowProperty, 2)
+      OpenSceneHost.SetValue(Grid.ColumnProperty, 0) '1
+      OpenSceneHost.SetValue(Grid.RowProperty, 0) ' 2
       ' OpenSceneHost.SetValue(Grid.RowSpanProperty, 1)
       OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
-      Me.OpenPageGrid.Children.Add(OpenSceneHost)
+      'Me.OpenPageGrid.Children.Add(OpenSceneHost)
+      SceneHostGrid.Children.Add(OpenSceneHost)
 
       ' Definizione del collegamento tra ItemList e ListBox1
       FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
@@ -100,6 +102,10 @@ Public Class OpenPageUC
          LoadCurrDir()
          m_bFirst = False
       Else
+         GetPrivateProfileString(S_SLABDXF, K_SLABLAYER, "SlabBoundary", m_sSlabLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_PARTSLAYER, "Counters", m_sPartsLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_SCRAPLAYER, "ReservedAreaBoundary", m_sScrapLayer, m_MainWindow.GetIniFile())
+         m_dSlabThick = GetPrivateProfileDouble(S_SLABDXF, K_STDTHICK, 20, m_MainWindow.GetIniFile())
          EgtSetCurrentContext(OpenScene.GetCtx())
       End If
       ' Pulisco tutto
@@ -237,6 +243,14 @@ Public Class OpenPageUC
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
+      ' Elimino elenco dei parcheggi
+      If Not IsNothing(m_SelParkInd) Then
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+         SceneHostGrid.Children.Remove(m_SelParkInd)
+         m_SelParkInd = Nothing
+      End If
+      ' Pulisco la selezione dei dati
+      SelParkIndWD.sActualProj = String.Empty
       ' Eseguo zoom
       OpenScene.ZoomAll()
       ' Cancello messaggio
@@ -298,6 +312,24 @@ Public Class OpenPageUC
          MessageBrd.Background = Brushes.Tomato
          OkBtn.IsEnabled = False
       End If
+
+      ' Recupero il percorso del progetto per caricare le immagini 
+      SelParkIndWD.sActualProj = sPath
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd, OpenScene.GetCtx)
+      If ListParkInd.Count > 2 And GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+         m_SelParkInd = New SelParkIndWD(m_MainWindow, OpenScene.GetCtx)
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 1)
+         m_SelParkInd.SetValue(Grid.ColumnProperty, 1)
+         SceneHostGrid.Children.Add(m_SelParkInd)
+      Else
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+         If Not IsNothing(m_SelParkInd) Then
+            SceneHostGrid.Children.Remove(m_SelParkInd)
+            m_SelParkInd = Nothing
+         End If
+      End If
+
       ' Eseguo zoom
       OpenScene.ZoomAll()
       Return bOk
@@ -471,11 +503,21 @@ Public Class OpenPageUC
       ' Se file dxf devo processarlo opportunamente
       Dim bFileDxf As Boolean = (EgtGetFileType(m_sCurrFile) = FT.DXF)
       If bFileDxf Then AdjustSlabDxf()
+
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
       ' Lancio caricamento nuovo progetto corrente
       m_MainWindow.m_CadCutPageUC.m_ProjectMgr.PostLoad(m_sCurrDir, m_sCurrFile)
+
+      '--------------------------------------------------------------------------------
+      ' Gestione visulizzazione lista pezzi in parcheggio
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sNewFileName As String = m_MainWindow.GetSaveDir() & "\" & Math.Abs(nProj).ToString("D4") & "_ParkInd_"
+      SelParkIndWD.CopyImgSvg(sNewFileName, OpenScene.GetCtx)
+      SelParkIndWD.sActualProj = String.Empty
+      '--------------------------------------------------------------------------------
+
       ' Se file dxf 
       If bFileDxf Then
          ' Applico le lavorazioni
@@ -509,6 +551,12 @@ Public Class OpenPageUC
    End Sub
 
    Private Sub OpenPage_Unloaded(sender As Object, e As RoutedEventArgs)
+      If Not IsNothing(m_SelParkInd) Then
+         SceneHostGrid.Children.Remove(m_SelParkInd)
+         m_SelParkInd = Nothing
+      End If
+      ' resetto il nome del progetto corrente
+      SelParkIndWD.sActualProj = String.Empty
    End Sub
 
 End Class

Project/ProjectMgrUC.xaml

@@ -43,9 +43,30 @@
             
             <ToggleButton Name="RegisterBtn"
                  Style="{DynamicResource OmagCut_YellowToggleButton}"></ToggleButton>
-           <Button Name="ResetCutBtn"
+
+            <Button Name="ResetCutBtn"
                  Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
-           <!--Abilito la selezione delle linee da disegno-->
+
+            <Popup Name="ResetCutPopUp"
+                   IsOpen="False"
+                   AllowsTransparency="False"
+                   PopupAnimation="Scroll"
+                   StaysOpen="False"  
+                   Placement="Top"
+                   PlacementTarget="{Binding ElementName=ResetCutBtn}">
+                <WrapPanel Orientation="Vertical" 
+                           Background="{DynamicResource OmagCut_Gray}">
+                    <Button x:Name="ResetCut1Btn"
+                            Width ="78" Height="78"
+                            Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
+                    <Button x:Name="ResetCut2Btn"
+                            Width ="78" Height="78"
+                            Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
+                </WrapPanel>
+            </Popup>
+
+
+            <!--Abilito la selezione delle linee da disegno-->
             <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                 <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </ToggleButton>

Project/ProjectMgrUC.xaml.vb

@@ -26,6 +26,8 @@ Public Class ProjectMgrUC
 
       RegisterBtn.Content = "REG"                              'Shape Registration
       ResetCutBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)         'Reset
+      ResetCut2Btn.Content = EgtMsg(91024)                     'Reset lavorazioni
+      ResetCut1Btn.Content = EgtMsg(91025)                     'Aggiorna feed/speed
       SimulateBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
@@ -33,7 +35,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
-      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Reset Feed (Shift)"
+      ResetCutBtn.ToolTip = EgtMsg(91241) & vbCrLf & EgtMsg(91242)     ' Reset Cuts - Other Reset (Shift)
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -99,8 +101,21 @@ Public Class ProjectMgrUC
       End If
       ' Scelta tavola della macchina
       Dim nTabInd As Integer = ChooseTable()
+
+      ' Creo una copia di tutte le immagini usata nella lista dei parcheggi
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
       ' Creo nuovo progetto
       m_CurrProjPage.NewProject(nTabInd, bRetainParkedParts)
+
+
+      ' Gestione visulizzazione lista pezzi in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ReloadListParkInd()
+      Dim sNewFileName As String = SelParkIndWD.GetPathCurrProj()
+      SelParkIndWD.CopyImgSvg(sNewFileName)
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ReloadListParkInd()
+
+
       ' Gestione stato FastGrid
       m_MainWindow.m_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
    End Sub
@@ -108,26 +123,11 @@ Public Class ProjectMgrUC
    Friend Function ChooseTable() As Integer
       Dim nTabInd As Integer = 0
       Select Case GetTableCount()
-         Case 3
-            ' Tavolo da usare ?
-            Dim TableToUse As New EgtMsgBox(m_MainWindow, "", EgtMsg(91111), EgtMsgBox.Buttons.ONE_TWO_THREE, EgtMsgBox.Icons.NULL)
-            Select Case TableToUse.m_nPressedBtn
-               Case 1    ' 1
-                  nTabInd = 1
-               Case 2    ' 2
-                  nTabInd = 2
-               Case 0    ' 3
-                  nTabInd = 3
-            End Select
-         Case 2
-            ' Tavolo da usare ?
-            Dim TableToUse As New EgtMsgBox(m_MainWindow, "", EgtMsg(91111), EgtMsgBox.Buttons.ONE_TWO, EgtMsgBox.Icons.NULL)
-            Select Case TableToUse.m_nPressedBtn
-               Case 1    ' 1
-                  nTabInd = 1
-               Case 0    ' 2
-                  nTabInd = 2
-            End Select
+         Case 4, 3, 2
+            Dim SelTabWD As New SelectTableWD(m_MainWindow)
+            SelTabWD.ShowDialog()
+            nTabInd = SelTabWD.nSelectedTable
+            SelTabWD.Close()
          Case Else
             nTabInd = 1
       End Select
@@ -140,13 +140,18 @@ Public Class ProjectMgrUC
       If GetPrivateProfileInt(S_TABLE, K_CHANGETABWD, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          Return nRes
       End If
-      Select Case GetTableCount()
-         Case 2
-            ' Vuoi cambiare tavola?
-            Dim TableToUse As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90968)), EgtMsgBox.Buttons.OK_CANCEL, EgtMsgBox.Icons.NULL)
-            nRes = TableToUse.m_nPressedBtn
+      Dim nCountTable As Integer = GetTableCount()
+      Select Case nCountTable
+         Case 4, 3, 2
+            ' visualizzo l'elenco dei bottoni associati alle tavole disponibili
+            Dim SelTabWD As New SelectTableWD(m_MainWindow)
+            SelTabWD.ShowDialog()
+            If SelTabWD.DialogResult Then
+               nRes = SelTabWD.nSelectedTable
+            End If
+            SelTabWD.Close()
          Case Else
-            ' negli altri casi (3 tavole o una tavola non fare nulla)
+            ' non fare nulla
       End Select
       Return nRes
    End Function
@@ -233,6 +238,9 @@ Public Class ProjectMgrUC
       If m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut Then
          ShowAllCurrPhaseMachinings()
       End If
+
+      'SelParkIndWD.UpdateViewOnParkInd(False)
+
       EgtDraw()
    End Sub
 
@@ -252,11 +260,25 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
-      If (Keyboard.Modifiers And ModifierKeys.Shift) Then
-         ' eseguo il ricalcolo delle sole FEED di lavorazione
-         UpdateFeedAllMachining()
-         Return
+      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+         If ResetCutPopUp.IsOpen Then
+            ResetCutPopUp.IsOpen = False
+         Else
+            ResetCutPopUp.IsOpen = True
+         End If
+      Else
+         ResetCut3Btn_Click()
       End If
+   End Sub
+
+   ' Reimposto le feed di tutte le lavorazioni
+   Private Sub ResetCut1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut1Btn.Click
+      ' eseguo il ricalcolo delle sole FEED di lavorazione
+      UpdateFeedAllMachining()
+   End Sub
+
+   ' Reimposto le lavorazioni di default e ripristino i parametri
+   Private Sub ResetCut2Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut2Btn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -266,6 +288,41 @@ Public Class ProjectMgrUC
       ResetAllStartCurv()
       ' cancello tutti i ponticelli disegnati
       ResetAllBRidges()
+      ' cancella tutti i tagli di separazione inseriti in OFFICE
+      ResetAllSplitCut()
+
+      ' assegno la lavorazione corrente per i tagli di lama inclinati (solo se specificato nella ComboBox della ChooseMachinig)
+      RestoreDef_Machinig(True)
+      ' assegno la lavorazione corrente per i tagli verticali
+      RestoreDef_Machinig(False)
+
+      ' Ricalcolo tutte le lavorazioni
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      ' Aggiorno visualizzazione
+      EgtDraw()
+   End Sub
+
+   ' Resetta i valori dei parametri (ma non le lavorazioni)
+   Private Sub ResetCut3Btn_Click()
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      ' Cancello eventuali messaggi
+      m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
+      ' cancella tutti i tagli di separazione inseriti in OFFICE
+      ResetAllSplitCut()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -312,47 +369,117 @@ Public Class ProjectMgrUC
          Dim m_ptRawMax, m_ptRawMin As Point3d
          If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then Return
          Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+
          ' Recupero spessore lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         EgtTdbSetCurrTool(sSaw)
+         Dim TestToolWD As New ChooseTestToolWD(m_MainWindow)
+         TestToolWD.ShowDialog()
+         If Not TestToolWD.DialogResult Then Return
+         Dim CurrTestTool As TestTool = TestToolWD.GetSelectedTool
+
+         'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         'EgtTdbSetCurrTool(sSaw)
+
          Dim dThick As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-         Dim dDiam As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
+         Dim dHeight As Double = 0
+         If CurrTestTool.ToolIsSaw Then
+            ' Spessore LAMA
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+            ' Diametro
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dHeight)
+            ' Raggio lama
+            dHeight = dHeight / 2
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Raggio
+            dThick = 0
+            dHeight = 0
+         Else
+            ' Diametro FRESA/FORETTO (l'altezza non serve: posizione calcolata tiene conto del Tip Tool)
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dThick)
+            ' Raggio
+            dThick = dThick / 2
+         End If
+
+
          'recupero il lato selezionato 
          Dim nIdSelected As Integer = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv
          If nIdSelected = -1 Then Return
-         ' recupero gli estremi del latovda tagliare
-         Dim ptStart As Point3d
-         EgtStartPoint(nIdSelected, GDB_ID.ROOT, ptStart)
-         Dim ptEnd As Point3d
-         EgtEndPoint(nIdSelected, GDB_ID.ROOT, ptEnd)
-         Dim vtDirLine As Vector3d = ptEnd - ptStart
-         ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+         ' recupero il vettore nel punto medio dell'entità
+         Dim vtDirLine As Vector3d
+         EgtMidVector(nIdSelected, GDB_ID.ROOT, vtDirLine)
+
+         ' calcolo il versore della linea di taglio
          Dim vtDirT As Vector3d = vtDirLine
          vtDirT.Normalize()
-         vtDirT.Rotate(Vector3d.Z_AX, 90)
+         ' calcolo la direzione di offset da applicare all'utensile
+         Dim vtOffset As New Vector3d(vtDirT.x, vtDirT.y, vtDirT.z)
+         vtOffset.Rotate(Vector3d.Z_AX, 90)
+
+         If CurrTestTool.ToolIsSaw Then
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+         Else
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+            ' calcolo il versore perpendicolare al piano di taglio (diretto verso l'interno dell'utensile)
+            vtDirT.Rotate(vtDirLine, 90)
+         End If
 
          ' Calcolo punto di posizionamemto (punto medio)
          Dim ptMid, m_ptTabOri As Point3d
 
          If Not EgtGetTableRef(1, m_ptTabOri) Then Return
-         ptMid.x = (ptEnd.x + ptStart.x) / 2
-         ptMid.y = (ptEnd.y + ptStart.y) / 2
-         ptMid.z = (ptEnd.z + ptStart.z) / 2 + dDiam / 2
-         ptMid -= vtDirT * dThick
+         ' recupero il punto medio della curva
+         EgtMidPoint(nIdSelected, GDB_ID.ROOT, ptMid)
+         ptMid.z = m_ptTabOri.z + CamAuto.GetRawHeight() + dHeight + m_MainWindow.m_CurrentMachine.dAdditionalTable
+         ' Offset dovuto allo spessore Utensile
+         ptMid -= vtOffset * dThick
 
          '--------------------------- Imposto la posizione della macchina ----------------------------
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+
+         ' Imposto la lama corrente, preso dalla scelta precedente
+         'If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         If Not EgtSetCalcTool(CurrTestTool.ToolName, CurrTestTool.ToolHead, CurrTestTool.ToolExit) Then Return
 
          ' calcolo la posizione degli assi rotanti C, B
          Dim nStat As Integer
          Dim dC1, dB1, dC2, dB2 As Double
-         EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         If CurrTestTool.ToolIsSaw Then
+            ' Se LAMA
+            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Se LASER
+            Dim dHomeC As Double = 90
+            EgtGetAxisHomePos("C", dHomeC)
+            Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+            vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+            EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ' Forzo B90
+            dB1 = 90
+            ' Forzo la pozione in Z alla quota di Home (per evitare l'errore di fine corsa asse Z)
+            Dim dHomeZ As Double = 0
+            EgtGetAxisHomePos("Z", dHomeZ)
+            ptMid.z = dHomeZ
+         Else
+            ' Se utensile speciale
+            If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+               ' Se FRESA/FORETTO
+               Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+               ' Se WJ
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            End If
+         End If
+
          ' calcolo la posizione degli assi lineari X, Y, Z
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
@@ -360,16 +487,49 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
+            EgtOutLog("Out of stroke: " & nStat)
             vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
-            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            If CurrTestTool.ToolIsSaw Then
+               EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolIsLaser Then
+               ' Se LASER
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ' Forzo B90
+               dB1 = 90
+            Else
+               If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+                  ' Se FRESA/FORETTO
+                  Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+                  Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+                  ' Se WJ
+                  Dim dHomeC As Double = 90
+                  EgtGetAxisHomePos("C", dHomeC)
+                  Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               End If
+            End If
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
+
+            ' verifica assi lineari
+            EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
+            If nStat <> 0 Then
+               EgtOutLog("2nd attemp out of stroke: " & nStat)
+            End If
          End If
 
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
-         Dim ptMachine As Point3d = New Point3d(dX, dY, dZ)
-         ExecuteCommandCNC(ptMachine, dC1, dB1)
+         Dim ptMachine As Point3d = New Point3d(dX, dY, If(CurrTestTool.ToolIsLaser, 0, dZ))
+         ExecuteCommandCNC(ptMachine, dC1, dB1, CurrTestTool)
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
@@ -517,7 +677,6 @@ Public Class ProjectMgrUC
             ' apro la finestra con l'elenco degli sfridi
             Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
             MyScrapsWD.ShowDialog()
-
          End If
          ' ------------------ FINE gestione SCRAPS -----------------------------
 
@@ -587,6 +746,13 @@ Public Class ProjectMgrUC
                   EgtDraw()
                   ' Dichiaro che il progetto è nuovo
                   bAlreadySent = False
+                  ' reimposto tutti gli sfridi come nuovi sfridi
+                  Dim CurrScrapsList As New List(Of Scrap)
+                  ' procedo all'aggiornamento della lista degli sfridi
+                  UpDateScrapList(CurrScrapsList)
+                  For Each ItemScrap As Scrap In CurrScrapsList
+                     ItemScrap.ResetState()
+                  Next
                End If
             End If
             If bAlreadySent Then
@@ -597,6 +763,18 @@ Public Class ProjectMgrUC
             End If
          End If
 
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
+
          ' Se non collegato alla macchina
          If Not m_MainWindow.m_bNCLink Then
             ' salvo il progetto corrente incrementando il valore del progetto
@@ -636,6 +814,12 @@ Public Class ProjectMgrUC
                Exit For
             End If
          Next
+
+         ' leggo il nome della tavola da cui sto lanciando il progetto 
+         Dim sTabeName As String = String.Empty
+         EgtGetTableName(sTabeName)
+         Dim bDoubleProg As Boolean = (GetPrivateProfileInt(S_PRODUCTIONLINE, "DoubleProg", 0, m_MainWindow.GetMachIniFile()) <> 0)
+
          ' Leggo eventuale variabile per lavorazione con 2 tavole in parallelo (standard E80027)
          Dim nVarProgTwins As Integer = 1
          If Not String.IsNullOrWhiteSpace(m_CurrMachine.sVarProgTwins) Then
@@ -649,8 +833,26 @@ Public Class ProjectMgrUC
                End If
             Next
          End If
+
          ' Verifico se posso scrivere nell'area 1
-         If nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2) Then
+         Dim bSendToAre1 As Boolean = (nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2))
+         Dim bSendToAre2 As Boolean = (nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2))
+
+         If bDoubleProg Then
+            If sTabeName = MAIN_TAB Then
+               ' spedisco il programma da tavola 1 solo se CN ha terminato programma 901
+               bSendToAre1 = (nVarProg1 = 0)
+               bSendToAre2 = False
+               EgtOutLog(" Invio programma da tavola 1")
+            Else
+               ' spedisco il programma da tavola 2 solo se CN ha terminato programma 902
+               bSendToAre1 = False
+               bSendToAre2 = (nVarProg2 = 0)
+               EgtOutLog(" Invio programma da tavola 2")
+            End If
+         End If
+
+         If bSendToAre1 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg1, False) Then
                ' Dichiaro part program inviato
@@ -667,7 +869,7 @@ Public Class ProjectMgrUC
             End If
             m_CurrNcComm.SetProgramMainOrSub(True)
             ' Altrimenti verifico se posso scrivere nell'area 2
-         ElseIf nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2) Then
+         ElseIf bSendToAre2 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg2, False) Then
                ' Dichiaro part program inviato
@@ -687,6 +889,12 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+         ' avvio programma solo se DoubleProg
+         If (GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 And bDoubleProg) And
+            (bSendToAre1 Or bSendToAre2) Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
 
       End If
 #End If
@@ -821,11 +1029,11 @@ Public Class ProjectMgrUC
             End If
          Next
       Next
-      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(91243) & nMachUpdated & "/ " & nMach)      ' Lavorazione aggiornate: 
    End Sub
 
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
-   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
+   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double, SelTestTool As TestTool)
 
       Dim CmdString As String = String.Empty
       If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
@@ -851,12 +1059,23 @@ Public Class ProjectMgrUC
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
 
-      ' Recupero spessore lama corrente
-      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-      EgtTdbSetCurrTool(sSaw)
+      '' Recupero spessore lama corrente
+      'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'EgtTdbSetCurrTool(sSaw)
+      'Dim dThick As Double = 0
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      'EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+
+      EgtTdbSetCurrTool(SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLNAME", SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLALIAS", SelTestTool.ToolAlias)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+      Dim sTCPos As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+      EgtLuaSetGlobStringVar("CMD.TCPOS", sTCPos)
+
 
       '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
       ' Assegno valore ad ogni asse da muovere (in zero macchina)
@@ -915,6 +1134,7 @@ Public Class ProjectMgrUC
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
          EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       End If
       ' aggiorno il disegno
       EgtDraw()
@@ -964,6 +1184,7 @@ Public Class ProjectMgrUC
       ResetCutBtn.Visibility = Windows.Visibility.Hidden
       SimulateBtn.Visibility = Windows.Visibility.Hidden
       WorkBtn.Visibility = Windows.Visibility.Hidden
+      If TestBtn.Visibility = Windows.Visibility.Visible Then TestBtn.Visibility = Windows.Visibility.Hidden
       ' Nascondo bottoni CadCutPageUC
       m_MainWindow.m_CadCutPageUC.PhotoBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.RawPartBtn.Visibility = Windows.Visibility.Hidden
@@ -979,6 +1200,19 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Hidden
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Hidden
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden
+      End If
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Hidden
+
+      m_MainWindow.m_CadCutPageUC.m_NestPage.LoadParams()
+      ' Rendo visibili i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Visible
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Visible
+
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se c'è la foto devo sistemare
@@ -1010,8 +1244,15 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
+
+      ' visualizzo i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.ON_)
+      ' eventualmente risistemo tutti i punti Spotreg in funzione dell'altezza del grezzo
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateSpotRegistration()
+      EgtDraw()
    End Sub
 
    Private Sub RegisterBtn_Unchecked(sender As Object, e As RoutedEventArgs) Handles RegisterBtn.Unchecked
@@ -1039,6 +1280,7 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.DrawBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.ImportBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.SplitBtn.Visibility = Windows.Visibility.Visible
+      If TestBtn.Visibility = Windows.Visibility.Hidden Then TestBtn.Visibility = Windows.Visibility.Visible
       ' Visualizzo bottoni nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.m_bRegister = False
       m_MainWindow.m_CadCutPageUC.m_NestPage.MaximizeMoveBtn.IsEnabled = True
@@ -1048,6 +1290,22 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Visible
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible
+      End If
+      ' disabilito i comandi per gestioen SpotReg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.PointRegCheckedOff()
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Hidden
+
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Visible
+
+      ' Nascondo i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+
       ' Se c'è la foto devo sistemare
       If m_CurrProjPage.GetPhoto() <> GDB_ID.NULL Then
          ' Recupero il riferimento originale del primo grezzo
@@ -1092,6 +1350,11 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
+      ' nascondi i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.OFF)
+      EgtDraw()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
    End Sub
@@ -1103,6 +1366,7 @@ Public Class Scrap
    Private m_iPictureID As Integer
    Private m_sName As String
    Private m_IdRaw As Integer
+   ' nState=1 -> da inserire in DB, nState=2 -> già inserito in DB
    Private m_nState As Integer
 
    Public Property PictureID() As Integer
@@ -1135,9 +1399,16 @@ Public Class Scrap
       End Get
    End Property
 
-   Public ReadOnly Property PictureString() As String
+   Public Sub ResetState(Optional nNewState As Integer = 1)
+      m_nState = nNewState
+      EgtSetInfo(m_IdRaw, K_ISNEWSCRAPS, nNewState)
+      EgtRemoveInfo(m_IdRaw, K_DATABASEID)
+   End Sub
+
+   Public ReadOnly Property PreviewState As System.Windows.Media.Imaging.BitmapImage
       Get
-         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+         Dim sPath As String = "/Resources/ImportPageListBoxImages/" & PictureID.ToString() & ".png"
+         Return New System.Windows.Media.Imaging.BitmapImage(New Uri(sPath, UriKind.Relative))
       End Get
    End Property
 

Project/SceneButtonsUC.xaml

@@ -39,6 +39,43 @@
       <Button Name="TopViewBtn" Grid.Column="6" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
          <Image Source="{DynamicResource LookFromTOPImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </Button>
+      <Popup Name="ViewPopUp"
+             IsOpen="False"
+             AllowsTransparency="False"
+             PopupAnimation="Scroll"
+             StaysOpen="False"  
+             Placement="Bottom"
+             PlacementTarget="{Binding ElementName=TopViewBtn}">
+         <WrapPanel Orientation="Vertical" 
+                    Width="78"
+                    Background="{DynamicResource OmagCut_Gray}">
+            <Button x:Name="BottomViewBtn" 
+                    ToolTip="Bottom View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromBOTTOMImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="FrontViewBtn" 
+                    ToolTip="Front View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromFRONTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="BackViewBtn"
+                    ToolTip="Back View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromBACKImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="LeftViewBtn"
+                    ToolTip="Left View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromLEFTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="RightViewBtn"
+                    ToolTip="Right View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromRIGHTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </WrapPanel>
+      </Popup>
       
    </Grid>