Merge branch 'master' into Features/Max_Weight_On_Vacuums

CadCuts/MoveRawPartPage.xaml.vb

@@ -240,6 +240,16 @@ Public Class MoveRawPartPage
                ' Se con ventose, le posiziono sul grezzo
                If Not m_bByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, m_MainWindow.GetMachIniFile())
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -251,8 +261,13 @@ Public Class MoveRawPartPage
                   Else
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento
-                     m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     If VacuumCups.bOverWeight Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4)) 'Pezzo troppo pesante : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     End If
+
                   End If
                End If
             End If

CadCuts/VacuumCups.vb

@@ -10,7 +10,18 @@ Module VacuumCups
    Private m_dPreferredRot As Double = 0
    Private m_dPrefVertRotXMinus As Double = 0
    Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -50,6 +61,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -78,7 +103,9 @@ Module VacuumCups
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
       ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -165,6 +192,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -187,6 +226,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -368,6 +408,23 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
       ' Recupero l'area della tavola
       Dim b3Tab As New BBox3d
       EgtGetTableArea(1, b3Tab)
@@ -383,12 +440,21 @@ Module VacuumCups
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
-         If Math.Abs( dRotAngDeg - 90) < 45  Or  Math.Abs( dRotAngDeg - 270) < 45 Then
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+            ' se l'orientamento è verticale
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
-            else
+            Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
          End If 
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
          While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
@@ -471,6 +537,27 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   Private Function GetPluggerFromCameras(sCups) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -94,6 +94,8 @@ Module ConstGen
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
    Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
    Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti

Constants/ConstIni.vb

@@ -46,10 +46,6 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
-   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
-   Public Const K_STARTPROGRAM As String = "StartProgram"
-   Public Const K_GENERATECN As String = "GenerateCN"
-
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"

Constants/ConstMachIni.vb

@@ -228,6 +228,10 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -290,5 +294,6 @@
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
    Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

OmagCUT.vbproj

@@ -1249,12 +1249,6 @@
     <Resource Include="Resources\Spiral.png" />
     <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
   </ItemGroup>
-  <ItemGroup>
-    <Resource Include="Resources\NewIcons\GenerateCN.png" />
-  </ItemGroup>
-  <ItemGroup>
-    <Resource Include="Resources\GenerateCN.png" />
-  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -46,7 +46,6 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
-    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -116,7 +116,6 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
-    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>

Project/ProjectMgrUC.xaml.vb

@@ -470,15 +470,20 @@ Public Class ProjectMgrUC
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
+               ''-------------------Avvio il Ciclo-Start-------------------------
+               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+               'MyCicloStartWD.ShowDialog()
+               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
 
-         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
-         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         '-------------------Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
             Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
             MyCicloStartWD.ShowDialog()
          End If
-         '------------------- FINE Avvio il Ciclo-Start-------------------------
+
+         '-------------------Avvio il Ciclo-Start-------------------------
 
          ' Altrimenti linea di produzione
       Else

RawPhoto/RawPartPageUC.xaml.vb

@@ -142,7 +142,7 @@ Public Class RawPartPageUC
                    GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
       SlabIdBtn.Visibility = If(m_bSlabId, Windows.Visibility.Visible, Windows.Visibility.Collapsed)
 
-      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, K_SMARTMACHININGPAGE, 0, m_MainWindow.GetIniFile()) <> 0
+      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, "SmartMachiningPage", 0, m_MainWindow.GetIniFile()) <> 0
 
       ' Imposto i messaggi letti dal file dei messaggi
       OutlineBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 33)       'Rectangle - Rettangolo

Simulation/SimulationPageUC.xaml

@@ -240,9 +240,6 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
-         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateXPIUC_Click">
-                <Image Source="{DynamicResource GenerateCNImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
-         </Button>
          <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtnUC_Click">
             <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>

Simulation/SimulationPageUC.xaml.vb

@@ -1,6 +1,5 @@
 Imports System.Runtime.InteropServices
 Imports EgtUILib
-Imports EgtWPFLib
 
 Public Class SimulationPageUC
    ' Riferimenti a pagine
@@ -77,12 +76,6 @@ Public Class SimulationPageUC
       End If
       ' Pulsante Play
       PlayPauseImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Play.png", UriKind.Relative))
-      ' abilito la visualizzazione del pulsante per la sola generazione del codice CN
-      If GetPrivateProfileInt(S_GENERAL, K_GENERATECN, 0, m_MainWindow.GetIniFile()) <> 0 Then
-         GenerateCN_Btn.Visibility = Visibility.Visible
-      Else
-         GenerateCN_Btn.Visibility = Visibility.Hidden
-      End If
    End Sub
 
    Private Sub SimulationPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -566,111 +559,6 @@ Public Class SimulationPageUC
 
    End Sub
 
-   Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
-      Dim bOk As Boolean = True
-      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
-      ' Elimino eventuale attrezzaggio da OmagOFFICE
-      EgtEraseCurrSetup()
-      ' Verifico l'attrezzaggio degli utensili utilizzati
-      Dim sMissingTools As String = String.Empty
-      If Not VerifySetup(sMissingTools) Then
-         m_CurrProjPage.SetErrorMessage(EgtMsg(90322) & " " & sMissingTools)  'Mancano gli utensili : ... 
-         Return
-      End If
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Aggiorno flag per lavaggio
-      m_CurrProjPage.UpdateWashingFlag()
-      ' Aggiorno flag per tastatura per tagli con angolo di fianco
-      m_CurrProjPage.UpdateSideAngCutProbeFlag()
-      ' Se pezzi piani e non c'è ordine delle lavorazioni, ricalcolo tutto e ne faccio uno automatico
-      Dim nPrjType As Integer = m_CurrProjPage.GetCurrentProjectType()
-      Dim bDirectCut As Boolean = (GetDirectCutPart() <> GDB_ID.NULL)
-      If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
-         Not bDirectCut And
-         Not m_CurrProjPage.GetOrderMachiningFlag() Then
-         ResetAllMachinings()
-         bOk = SortAllMachinings()
-         If bOk Then
-            m_CurrProjPage.SetOrderMachiningFlag()
-            Dim bModif As Boolean = TestAllMachiningsForStrict()
-            If bModif Then
-               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
-            Else
-               m_CurrProjPage.SetInfoMessage(EgtMsg(90399))        'Aggiornate tutte le lavorazioni
-            End If
-            EgtDraw()
-         End If
-      End If
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Disabilito impostazione modificato
-      EgtDisableModified()
-      ' Aggiorno le lavorazioni
-      bOk = UpdateAllMachiningsToolpaths() And bOk
-      ' Aggiorno posizionamento ventose sui pezzi per eventuali tagli da sotto con lama
-      bOk = UpdateVacuumsForDrip() And bOk
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Inserisco indice di progetto
-      m_CurrProjPage.SetProjectIndexFlag()
-      ' Inserisco il materiale
-      m_CurrProjPage.SetProjectMaterial()
-      ' Salvo il progetto con le lavorazioni
-      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\MachProj.nge"
-      m_CurrProjPage.SaveFile(sMchPath)
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Se modalità Ufficio, copio il progetto ed esco
-      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
-         ' Ripristino come fase corrente quella iniziale
-         EgtSetCurrPhase(1)
-         ' Chiedo il nome del file esportato
-         Dim MySaveNameWD As New SaveNameWD(m_MainWindow, SaveNameWD.SAVE_TYPE.PRJ_COPY)
-         MySaveNameWD.ShowDialog()
-         Return
-      End If
-      ' Se presente ripartenza, ne chiedo conferma
-      Dim nPhaseRestart As Integer = m_CurrProjPage.GetProjectNcRestart()
-      If nPhaseRestart <> 0 Then
-         ' Confermi ripartenza dalla fase NNN ?
-         Dim AskNcRestart As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90326), nPhaseRestart),
-                                        EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL, 2)
-         Select Case AskNcRestart.m_nPressedBtn
-            Case 1         ' YES
-            Case 2         ' NO
-               EgtEnableModified()
-               m_CurrProjPage.ResetProjectNcRestart()
-               nPhaseRestart = 0
-               EgtDisableModified()
-            Case Else      ' CANCEL
-               Return
-         End Select
-      End If
-      ' Se abilitate, eseguo le stime
-      If GetPrivateProfileInt(S_MACH_ESTIMATIONS, K_ENABLEEST, 0, m_MainWindow.GetMachIniFile()) <> 0 Then
-         EgtEstimate(m_MainWindow.GetTempDir() & "\MachProj.html", "OmagCut ver." & m_MainWindow.GetVersion())
-      End If
-      ' Genero file CNC (lancio anche se errore in precedenza) -> recupero la tavola corrente! CamAuto.GetCurrentTable()
-      Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
-      Dim sIndexTab As String = String.Empty
-      If nIndexTab > 0 Then
-         sIndexTab = nIndexTab.ToString
-      End If
-      Dim sFileName As String = "CadCut" & sIndexTab
-      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\" & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt
-      bOk = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion()) And bOk
-      ' Costringo ad aggiornare UI
-      UpdateUI()
-      ' Ripristino come fase corrente quella iniziale
-      EgtSetCurrPhase(1)
-      If bOk Then
-         m_CurrProjPage.SetInfoMessage("Genarato file " & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)
-      Else
-         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
-      End If
-   End Sub
-
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer
       ' Visualizzo assi
       ShowCncData()