Correzione gestione uscita pagina DrawPage

Constants/ConstIni.vb

@@ -287,6 +287,8 @@ Module ConstIni
    Public Const S_VEINMATCHING As String = "VeinMatching"
    Public Const K_VEINMA_ENABLE As String = "Enable"
    Public Const K_VEINMA_PLACE As String = "WinPlace"
+   Public Const K_VEINMA_WIDTH As String = "Width"
+   Public Const K_VEINMA_HEIGHT As String = "Height"
 
    Public Const S_FASTGRID As String = "FastGrid"
    Public Const K_FG_ENABLE As String = "FGEnable"

DrawImport/DrawPageUC.xaml.vb

@@ -1190,7 +1190,7 @@ Public Class DrawPageUC
       If Keyboard.Modifiers And ModifierKeys.Shift Then
          bExitPage = Not bExitPage
       End If
-      If bExitPage And m_MainWindow.FrameCutBtn.IsChecked Then
+      If bExitPage Then
          ' Aggiorno ambiente principale
          EgtZoom(ZM.ALL)
          ' Elimino nome del componente precedente
@@ -1217,6 +1217,7 @@ Public Class DrawPageUC
          Else
             LoadSecondaryPage()
          End If
+
       End If
    End Sub
 

Machine/ToolsDbPageUC.xaml.vb

@@ -700,7 +700,7 @@ Public Class ToolsDbPageUC
             If nTType <> MCH_TY.MILL_STD Then
                ' se utensile diverso da MILL
                ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
-            ElseIf nTType <> MCH_TY.MILL_STD And ToolName.Trim.ToLower = "probe" And nDebug > 4 Then
+            ElseIf nTType = MCH_TY.MILL_STD And (ToolName.Trim.ToLower <> "probe" Or nDebug > 4) Then
                ' Se utensile MILL con nome "probe" aggiungo solo se livello debug maggiore di 4
                ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
             End If

MainWindow.xaml.vb

@@ -23,6 +23,9 @@ Class MainWindow
    ' Coefficiente di scalatura della finestra rispetto a standard
    Friend m_dMWinScale As Double = 1
 
+   ' Variabile che definisce l'avvio forzato in modalità FRAME
+   Friend m_OnlyFrame As Boolean = False
+
    ' Dichiarazione delle Page UserControl
    Friend m_WorkInProgressPageUC As WorkInProgressPageUC
    Friend m_CurrentProjectPageUC As CurrentProjectPageUC
@@ -101,6 +104,7 @@ Class MainWindow
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
       COMPOFRAME = 2 ^ 22                 ' 4194304
+      CUT_LIGHT = 2 ^ 23                  ' 8388608
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -339,10 +343,16 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2603, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2603, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
+
+      ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
+      If Not bProd Then
+         m_OnlyFrame = GetKeyOption(KEY_OPT.CUT_LIGHT)
+      End If
+
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
       m_sVersion = My.Application.Info.Version.Major.ToString() & "." &
@@ -658,16 +668,12 @@ Class MainWindow
 
       ' Or nAssLeftDays = 358
       If (nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28 Then
-         'Dim sText As String = "Fai ammenda," & vbCrLf & "gli aggiornamenti sono in fase di scadenza!"
-         'Dim sTitle As String = "⚠️ Warning!"
-         'Dim MissingKeyWnd As New EgtMsgBox(Me, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
-         ' finestra Custom
-         Dim sMsg As String = EgtMsg(91141)
+         Dim sMsg As String = EgtMsg(91141)   ' Assistenza in scadenza /nContattare assistenza:/n
          Dim sAssistance As String = String.Empty
          GetPrivateProfileString(S_GENERAL, "Assistances", "", sAssistance, GetIniFile)
          Dim sItems As String() = sAssistance.Split(","c)
          For Each Item As String In sItems
-            sMsg &= "→ " & Item.Trim & " /n"
+            sMsg &= " → " & Item.Trim & " /n"
          Next
          Dim MyLicWn As New LicenseWindow(Me, sMsg, "Assistance " & sAssStatus)
          MyLicWn.Show()
@@ -1139,7 +1145,7 @@ Class MainWindow
       End If
       ' Inizio la chiusura del programma (se NUM_OLD verifico di aver terminato il processo DripFeed)
       EgtOutLog("Iniziato processo di chiusura programma")
-      m_IsClosingApplication = If( m_CNCommunication.m_nNCType = 1, 1, 2)
+      m_IsClosingApplication = If(m_CNCommunication.m_nNCType = 1, 1, 2)
       Dim nCount As Integer = 0
       While m_IsClosingApplication <> 2
          If nCount > 5 Then
@@ -1277,7 +1283,11 @@ Class MainWindow
          m_ProdLineTimer.Start()
       End If
       ' di default attivo la pagina CadCut
-      m_ActivePage = MainWindow.Pages.CadCut
+      If m_OnlyFrame Then
+         m_ActivePage = MainWindow.Pages.FrameCut
+      Else
+         m_ActivePage = MainWindow.Pages.CadCut
+      End If
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
@@ -1314,8 +1324,33 @@ Class MainWindow
       Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
       EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
-      CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      If m_OnlyFrame Then
+         If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And m_ActivePage <> Pages.RawPart Then
+            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91142), EgtMsg(91143), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPreNewProject()
+            ' Cancello progetto salvato con nome da file ini
+            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", GetIniFile())
+            ' Scelta tavola della macchina
+            Dim nTabInd As Integer = m_CadCutPageUC.m_ProjectMgr.ChooseTable()
+            ' Creo nuovo progetto
+            m_CurrentProjectPageUC.NewProject(nTabInd, False)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
+            FrameCutBtn_Click(Nothing, Nothing)
+            CadCutBtn.IsEnabled = False
+         Else
+            FrameCutBtn.IsEnabled = True
+            CadCutBtn.IsEnabled = False
+            ' Attivo il pulsante FRAME
+            'FrameCutBtn.IsChecked = True
+            'CadCutBtn.IsChecked = False
+         End If
+      Else
+         CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
+         FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      End If
+
       ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.12.4")>
-<Assembly: AssemblyFileVersion("2.5.12.4")>
+<Assembly: AssemblyVersion("2.6.3.1")>
+<Assembly: AssemblyFileVersion("2.6.3.1")>

Project/CurrentProjectPageUC.xaml.vb

@@ -276,7 +276,7 @@ Public Class CurrentProjectPageUC
       ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
       If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
          ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+         If GetProjectType() <> PRJ_TYPE.FRAMES And Not m_MainWindow.m_OnlyFrame Then
             CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
             m_MainWindow.CadCutBtn.IsChecked = True

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -1174,6 +1174,8 @@ Friend Module VeinMatching
       ' Esporto il file come immagine
       EgtSetCurrentContext(m_nVeinCtx)
       Dim bOk As Boolean = (EgtGetFileType(sFilePath) = FT.IMG)
+      m_nImgWidth = GetPrivateProfileDouble(S_VEINMATCHING, K_VEINMA_WIDTH, m_nImgWidth, m_MainWindow.GetIniFile)
+      m_nImgHeight = GetPrivateProfileDouble(S_VEINMATCHING, K_VEINMA_WIDTH, m_nImgHeight, m_MainWindow.GetIniFile)
       bOk = bOk AndAlso EgtGetImage(EgtGetShowMode(), New Color3d(255, 255, 255), New Color3d(255, 255, 255),
                                     m_nImgWidth, m_nImgHeight, sFilePath)
       ' Ripristino il contesto originale