Merge branch 'develop'

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CadCuts/MoveRawPartPage.xaml.vb

@@ -329,8 +329,6 @@ Public Class MoveRawPartPage
                   VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
                   VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  ' se su scarico frontale allora devo modificare la scelta delle ventose
-                  VacuumCups.bUnloadingOnAuxTab = m_SplitPage.m_bOnAuxTab
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)

CadCuts/NestPageUC.xaml.vb

@@ -1353,8 +1353,8 @@ Public Class NestPageUC
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
 
-
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL

CadCuts/VacuumCups.vb

@@ -546,16 +546,27 @@ Module VacuumCups
       Return True
    End Function
 
-   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

DirectCuts/SingleCutUC.xaml.vb

@@ -583,7 +583,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -599,9 +599,12 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,22 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"

MainWindow.xaml.vb

@@ -38,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -326,8 +328,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2501, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2501, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2503, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2503, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -1085,6 +1087,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.1.2")>
-<Assembly: AssemblyFileVersion("2.5.1.2")>
+<Assembly: AssemblyVersion("2.5.3.1")>
+<Assembly: AssemblyFileVersion("2.5.3.1")>

NcComm/CNCommunication.vb

@@ -2,6 +2,7 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports OmagCUT.Num
 
 Public Class CNCommunication
 
@@ -354,8 +355,8 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-            ' Inizializzo la comunicazione
-            m_CN.Init()
+         ' Inizializzo la comunicazione
+         m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -496,6 +497,7 @@ Public Class CNCommunication
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -619,12 +621,17 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
          m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -907,28 +914,51 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         EgtOutLog("IsDripFeed : " & DirectCast(m_CN, NumNCOld).bIsDripFeed)
+         If m_nNCType = 1 AndAlso TypeOf m_CN Is NumNCOld AndAlso DirectCast(m_CN, NumNCOld).bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog(TimeSpanEnd())
          End If
+
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -478,7 +480,6 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione

Utility/Utility.vb

@@ -1,4 +1,5 @@
 Imports System.Globalization
+Imports System.Diagnostics
 Imports System.Collections.ObjectModel
 Imports System.Text.RegularExpressions
 Imports EgtWPFLib
@@ -17,8 +18,25 @@ Module Utility
    End Function
 
 
-   '--------------------------------------------------------------------------------------------------
-   Friend Sub UpdateUI()
+    Friend StopWatch As Stopwatch
+
+    Friend Sub TimeSpanInit()
+        StopWatch = New Stopwatch
+        StopWatch.Start()
+    End Sub
+
+    Friend Function TimeSpanEnd()
+        Dim sTime As String = ""
+        If Not IsNothing(StopWatch) Then
+            StopWatch.Stop()
+            Dim ts As TimeSpan = StopWatch.Elapsed
+            sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
+        End If
+        Return sTime
+    End Function
+
+    '--------------------------------------------------------------------------------------------------
+    Friend Sub UpdateUI()
       ' Costringo ad aggiornare UI
       Dim nDummy As Integer
       Application.Current.Dispatcher.Invoke(Windows.Threading.DispatcherPriority.Background, _
@@ -187,10 +205,10 @@ Module Utility
    End Function
 
    ' conerte il dato (in mm) in stringa nell'unità corrente
-   Friend Function LenToString(dVal As Double, nNumDec As Integer) As String
+   Friend Function LenToString(dVal As Double, nNumDec As Integer, Optional ByVal bForceToDecimal As Boolean = False) As String
       Dim sVal As String = DoubleToString(EgtToUiUnits(dVal), nNumDec)
       ' se richiesta scrittura in frazione (solo se unità corrente INCHES)
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          ' conevrto il dato corrente in decimale
          Dim dCurrVal As Double = dVal
          StringToDouble(sVal, dCurrVal)
@@ -199,10 +217,10 @@ Module Utility
       Return sVal
    End Function
 
-   Friend Function StringToLen(sVal As String, ByRef dVal As Double) As Boolean
+   Friend Function StringToLen(sVal As String, ByRef dVal As Double, Optional ByVal bForceToDecimal As Boolean = False) As Boolean
       If String.IsNullOrEmpty(sVal) Then Return False
 
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          Dim sValSource As String = sVal
          ' conevrto la stringa in formato decimale (sempre in stringa)
          StringFractionToStringDecimal(sValSource, sVal)