Miogliorata gestione spostamenti grezzi e cambio versione

- promozione modifiche per fiera
- sistemazione VeinMatching con top cucina da componenti
- gestione anima per lame.

CadCuts/MoveRawPartPage.xaml.vb

@@ -94,7 +94,9 @@ Public Class MoveRawPartPage
       End If
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
-      StepMoveTxBx.Text = LenToString(m_dStep, 3)
+      ' Ricavo la lunghezza del baffo di taglio 
+      m_dStep = SplitAuto.MaxCuttingMustache(m_dStep)
+      StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+1"
       m_dRotation = GetPrivateProfileDouble(S_RAWMOVE, K_RAWROTATION, 30, m_MainWindow.GetIniFile())
       RotationAngleTxBx.Text = DoubleToString(m_dRotation, 3)
       ' Se movimento manuale perpendicolare

CadCuts/SplitAuto.vb

@@ -5,6 +5,11 @@ Public Module SplitAuto
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private m_dLastDT As Double = 0
+   Public ReadOnly Property dLastDT As Double
+      Get
+         Return m_dLastDT
+      End Get
+   End Property
 
    '-----------------------------------------------------------------------------------------------
    Friend Class SplitMach
@@ -817,4 +822,30 @@ Public Module SplitAuto
       Return (Not bInterf)
    End Function
 
+   Public Function MaxCuttingMustache(dMustache As Double) As Double
+      Dim MachSplitList As New List(Of SplitMach)
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se non è stata creata nessuna lista allora restituisco il valore di Default
+      If Not CalculateSplitMachList(nCurrPhase, MachSplitList) Then Return dMustache
+      Dim NewMustache As Double = 0
+      Dim ItemMachSplit As SplitMach
+      For Each ItemMachSplit In MachSplitList
+         ' Recupero lunghezza baffo secondo taglio
+         Dim nPvId As Integer = GDB_ID.NULL
+         EgtGetInfo(EgtGetFirstNameInGroup(ItemMachSplit.m_nId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+         Dim dDT As Double
+         If EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT) Then
+            If NewMustache < dDT Then NewMustache = dDT
+         End If
+      Next
+      Dim dExtraL As Double = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTRALONCUTREG, dExtraL)
+      ' se esiste il valore di un baffo allora sovrascrivo il valore di default
+      If NewMustache > 0 Then
+         dMustache = Math.Ceiling(NewMustache)
+      End If
+      Return dMustache + dExtraL
+   End Function
+
 End Module

Constants/ConstGen.vb

@@ -334,6 +334,8 @@ Module ConstGen
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 
@@ -343,6 +345,9 @@ Module ConstGen
    ' Lunghezza libera infinita
    Public Const FREELEN_INF = 9999
 
+   ' Costante per lunghezza gambo di lama
+   Public Const STEM = 131072
+
    ' Colori per lavorazioni
    Public Function COL_MCH_CUT() As Color3d
       Return New Color3d(0, 255, 0)

DrawImport/DrawPageUC.xaml.vb

@@ -1059,7 +1059,7 @@ Public Class DrawPageUC
                If sCMP.StartsWith("PCucina") Or sCMP.StartsWith("PBagno") Or sCMP.StartsWith("AlzFront") Then
                   ' Aggiungo riferimento e lo inserisco in VeinMatching
                   VeinMatching.SetRefOnPart(nId2)
-                  VeinMatching.AddPartFromDraw(nId2, True)
+                  VeinMatching.AddPartFromDraw(nId2)
                   ' Se richiesto posizionamento diretto, lo eseguo
                   If bDirect Then
                      If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then

Machine/ToolsDbPageUC.xaml.vb

@@ -17,6 +17,8 @@ Public Class ToolsDbPageUC
    Dim ToolsList As New ObservableCollection(Of CathegoryItem)
    ' Proprietà
    Private m_bFirst As Boolean = True
+   ' Flag nuova gestione parametri lama in disegno
+   Private m_bNewSawbladeMaker As Boolean = False
    ' Stringa identificativa variabile geometrica in modifica
    Private m_sCurrVar As String = String.Empty
    ' Parametri dell'utensile corrente
@@ -173,6 +175,10 @@ Public Class ToolsDbPageUC
          If Not m_CurrMachine.bShowHeadExit Then
             MoveParam()
          End If
+         ' Verifico se macchina con nuovo SawbladeMaker
+         Dim sSawBladeMaker As String = ""
+         GetPrivateProfileString( S_TOOLS, K_SAWBLADEMAKER, "", sSawBladeMaker, m_MainWindow.GetIniFile())
+         m_bNewSawbladeMaker = String.Compare( sSawBladeMaker, "MakeStoneSawBlade.lua", True)
          m_bFirst = False
       Else
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
@@ -915,8 +921,8 @@ Public Class ToolsDbPageUC
             nMsg = MSG_TOOLSDBPAGEUC + 24       ' Tagliente
          Case MCH_TP.CORE
             nMsg = 90720                        ' Anima
-            'Case MCH_TP.STEM
-            'nMsg = "Portautensile"       ' Portautensile
+         Case STEM
+            nMsg = 90719                        ' Lunghezza portautensile
       End Select
       ' Predispongo calcolatrice (converto sempre in UIUnits perchè tutte lunghezze)
       Dim EgtCalculator As New EgtCalculatorWD(m_MainWindow, EgtToUiUnits(dVal), 300, WidthType.PIXEL, 0, 0, EgtMsg(nMsg))
@@ -947,7 +953,20 @@ Public Class ToolsDbPageUC
    Private Function GetVariableValue(ByRef dVal As Double) As Boolean
       ' Recupero valore variabile
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      Return EgtTdbGetCurrToolParam(GetVariableType(), dVal)
+      Dim nVarType As Integer = GetVariableType()
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nVarType <> STEM Then
+         Return EgtTdbGetCurrToolParam(nVarType, dVal)
+      Else
+         Dim dL, dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.LEN, dL) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            dVal = Math.Max(dL - (dCore + dTh) / 2, 0.0)
+            Return True
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function SetVariableValue(ByVal dVal As Double) As Boolean
@@ -961,8 +980,30 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dVal + 1)
             Case MCH_TP.DIAM
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
+            Case MCH_TP.THICK
+               If m_bNewSawbladeMaker Then
+                  Dim dTh, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dTh) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
             Case MCH_TP.CORE
-               EgtTdbSetCurrToolParam(MCH_TP.CORE, dVal)
+               If m_bNewSawbladeMaker Then
+                  Dim dCore, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dCore) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
          End Select
       ElseIf m_nToolType = MCH_TY.DRILL_STD Then
          Select Case nType
@@ -988,7 +1029,19 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
          End Select
       End If
-      Return EgtTdbSetCurrToolParam(nType, dVal)
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nType <> STEM Then
+         Return EgtTdbSetCurrToolParam(nType, dVal)
+      Else
+         Dim dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            Dim dL As Double = Math.Max( dVal, 0.0) + ((dCore + dTh) / 2)
+            EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dL + 1)
+            Return EgtTdbSetCurrToolParam(MCH_TP.LEN, dL)
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function GetVariableType() As Integer
@@ -1004,7 +1057,7 @@ Public Class ToolsDbPageUC
       ElseIf m_sCurrVar = "CORE" Then
          nType = MCH_TP.CORE
       ElseIf m_sCurrVar = "STEM" Then
-         'nType = MCH_TP.STEM
+         nType = STEM
       End If
       Return nType
    End Function
@@ -1066,6 +1119,13 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.THICK, dToolThick)
                EgtOutLog("ToolThick too small ->" & DoubleToString(dToolThick, 1))
             End If
+            Dim dToolCore As Double
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dToolCore)
+            If dToolCore < EPS_SMALL Then
+               dToolCore = If( dToolLen >= dToolThick, dToolThick - 1, 2 * dToolLen - dToolThick)
+               EgtTdbSetCurrToolParam(MCH_TP.CORE, dToolCore)
+               EgtOutLog("ToolCore too small ->" & DoubleToString(dToolCore, 1))
+            End If
             Dim dToolMaxMat As Double
             EgtTdbGetCurrToolParam(MCH_TP.MAXMAT, dToolMaxMat)
             If dToolMaxMat < EPS_SMALL Then

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2309, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2309, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2310, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2310, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.9.5")>
-<Assembly: AssemblyFileVersion("2.3.9.5")>
+<Assembly: AssemblyVersion("2.3.10.2")>
+<Assembly: AssemblyFileVersion("2.3.10.2")>

OmagCUTDictionary.xaml

@@ -156,29 +156,79 @@
     <BitmapImage x:Key="VacuumImg" UriSource="Resources/Vacuum.png"></BitmapImage>
 
     <!--sono le stesse immagini usate per l'interfaccia Dark-->
+    <!--General-->
+    <BitmapImage x:Key="EseguiImg" UriSource="Resources/NewIcons/Esegui.png"></BitmapImage>
+    <BitmapImage x:Key="SimulaImg" UriSource="Resources/NewIcons/Simula.png"></BitmapImage>
+
     <!--ProjectManager-->
     <BitmapImage x:Key="NuovoImg" UriSource="Resources/NewIcons/Nuovo.png"></BitmapImage>
     <BitmapImage x:Key="CaricaImg" UriSource="Resources/NewIcons/Carica.png"></BitmapImage>
     <BitmapImage x:Key="SalvaImg" UriSource="Resources/NewIcons/Salva.png"></BitmapImage>
     <BitmapImage x:Key="Salva-con-nomeImg" UriSource="Resources/NewIcons/Salva-con-nome.png"></BitmapImage>
-    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/CSV.png"></BitmapImage>
+    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/File-CSV.png"></BitmapImage>
     <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
+    <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
+    <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
     <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
     <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
     <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
+    <BitmapImage x:Key="LucidaturaImg" UriSource="Resources/NewIcons/Lucidatura.png"></BitmapImage>
+
+
     <!--Direct cuts-->
     <BitmapImage x:Key="Taglio-grigliaImg" UriSource="Resources/NewIcons/Taglio-griglia.png"></BitmapImage>
     <BitmapImage x:Key="Taglio-multiploImg" UriSource="Resources/NewIcons/Taglio-multiplo.png"></BitmapImage>
     <BitmapImage x:Key="Taglio-singoloImg" UriSource="Resources/NewIcons/Taglio-singolo.png"></BitmapImage>
-    <BitmapImage x:Key="Foro-singoloImg" UriSource="Resources/NewIcons/Foro-singolo.png"></BitmapImage>
     <BitmapImage x:Key="SpianaturaImg" UriSource="Resources/NewIcons/Spianatura.png"></BitmapImage>
     <BitmapImage x:Key="Movimento-manualeImg" UriSource="Resources/NewIcons/Movimento-manuale.png"></BitmapImage>
     <BitmapImage x:Key="Copia-dimaImg" UriSource="Resources/NewIcons/Copia-dima.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1_P2Img" UriSource="Resources/NewIcons/Acquisisci-P1_P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1Img" UriSource="Resources/NewIcons/Acquisisci-P1.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P2Img" UriSource="Resources/NewIcons/Acquisisci-P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-PImg" UriSource="Resources/NewIcons/Acquisisci-P.png"></BitmapImage>
+    <BitmapImage x:Key="ArcoImg" UriSource="Resources/NewIcons/Arco.png"></BitmapImage>
+    <BitmapImage x:Key="LineaImg" UriSource="Resources/NewIcons/Linea.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi-segmentoImg" UriSource="Resources/NewIcons/Rimuovi-segmento.png"></BitmapImage>
+    <BitmapImage x:Key="ChiudiImg" UriSource="Resources/NewIcons/Chiudi.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-taglioImg" UriSource="Resources/NewIcons/Salva-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Take-pointImg" UriSource="Resources/NewIcons/Take-point.png"></BitmapImage>
+
+    <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+
+
     <!--Frame-->
     <BitmapImage x:Key="Sezione-corniceImg" UriSource="Resources/NewIcons/Sezione-cornice.png"></BitmapImage>
+    <BitmapImage x:Key="SpecchiaImg" UriSource="Resources/NewIcons/Specchia.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi_eliminaImg" UriSource="Resources/NewIcons/Rimuovi_elimina.png"></BitmapImage>
 
+    <!--Machinig-->
+    <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Centro-FuoriImg" UriSource="Resources/NewIcons/Fine-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-InizioImg" UriSource="Resources/NewIcons/Modifica-inizio.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-FineImg" UriSource="Resources/NewIcons/Modifica-fine.png"></BitmapImage>
+    <BitmapImage x:Key="InvertiImg" UriSource="Resources/NewIcons/Inverti.png"></BitmapImage>
+    <BitmapImage x:Key="Pausa-ON_OFFImg" UriSource="Resources/NewIcons/Pausa-ON_OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-fuoriImg" UriSource="Resources/NewIcons/Inizio-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-centroImg" UriSource="Resources/NewIcons/Inizio-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-fuoriImg" UriSource="Resources/NewIcons/Fine-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-centroImg" UriSource="Resources/NewIcons/Fine-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
 
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
@@ -199,7 +249,14 @@
       <Setter Property="Margin" Value="1" />
    </Style>
 
-   <!--Border-->
+    <Style x:Key="OmagCut_MachiningBorder" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
+        <Setter Property="Background" Value="{StaticResource OmagCut_Yellow}"/>
+        <Setter Property="BorderBrush" Value="#3C3F48"/>
+    </Style>
+
+    <!--Border-->
    <Style x:Key="OmagCut_Border" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
       <Setter Property="Background" Value="{StaticResource OmagCut_LightGray}"/>
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>
@@ -1174,6 +1231,7 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
+        <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />