Gestione modifica inizio/fine sugli angoli interni

- piccola correzione su abilitazione Cornici.

CAM/CamAuto.vb

@@ -442,7 +442,7 @@ Friend Module CamAuto
       Dim sInfo As String = String.Empty
       If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
          Dim sItems() As String = sInfo.Split(",".ToCharArray)
-         For Each sId In sItems
+         For Each sId As String In sItems
             Dim nId As Integer = 0
             StringToInt(sId, nId)
             If nId > 0 Then vOthId.Add(nId)
@@ -660,7 +660,7 @@ Friend Module CamAuto
       Dim sInfo As String = String.Empty
       If EgtGetInfo(nMchId, INFO_MCH_OTHMID, sInfo) Then
          Dim sItems() As String = sInfo.Split(",".ToCharArray)
-         For Each sId2 In sItems
+         For Each sId2 As String In sItems
             ' Indice gruppo di preview nella lavorazione
             Dim nId2 As Integer = GDB_ID.NULL
             StringToInt(sId2, nId2)
@@ -674,6 +674,9 @@ Friend Module CamAuto
       End If
       ' Lo sposto dalla lavorazione al pezzo
       Dim nId As Integer = EgtGetFirstInGroup(nMchPvId)
+
+      If nId = GDB_ID.NULL Then Return False
+
       While nId <> GDB_ID.NULL
          EgtRelocateGlob(nId, nPartPvId)
          nId = EgtGetFirstInGroup(nMchPvId)
@@ -699,11 +702,33 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function IsExitPreCut(nOperId As Integer) As Boolean
+      ' Deve essere una lavorazione
+      If Not EgtSetCurrMachining(nOperId) Then Return False
+      ' Verifico presenza Info di PreCut
+      Return EgtExistsInfo(nOperId, INFO_MCH_EPC)
+   End Function
+
+   Friend Function RemoveAllExitPreCuts() As Boolean
+      Dim nOperId As Integer = EgtGetFirstOperation()
+      While nOperId <> GDB_ID.NULL
+         Dim nNextOperId As Integer = EgtGetNextOperation( nOperId)
+         If EgtGetType( nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
+            EgtRemoveOperation( nOperId)
+         End If
+         nOperId = nNextOperId
+      End While
+      Return True
+   End Function
+
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
+      Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+      Dim sWaterJetQual As String = m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Dim sPocketMch As String = m_MainWindow.m_CurrentMachine.sCurrPocketing
       Dim sDripSawMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripSawing, "")
       Dim sDripDrillMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripDrilling, "")
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
@@ -715,10 +740,13 @@ Friend Module CamAuto
       Dim bMillingOnCorners As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim bMillingOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
+      EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
+      EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
+      EgtLuaSetGlobStringVar("CAM.WATERJETQLTY", sWaterJetQual)
       EgtLuaSetGlobStringVar("CAM.DRIPSAWMCH", sDripSawMch)
       EgtLuaSetGlobStringVar("CAM.DRIPDRILLMCH", sDripDrillMch)
       EgtLuaSetGlobNumVar("CAM.REDUCEDDEPTH", dReducedDepth)

CadCuts/CSVFile.vb

@@ -19,6 +19,14 @@ Friend Module CSVFile
       Public m_dDimX As Double = 0
       Public m_dDimY As Double = 0
       Public m_dTh As Double = 0
+      Public m_dAng1 As Double = 0
+      Public m_dHeel1 As Double = 0
+      Public m_dAng2 As Double = 0
+      Public m_dHeel2 As Double = 0
+      Public m_dAng3 As Double = 0
+      Public m_dHeel3 As Double = 0
+      Public m_dAng4 As Double = 0
+      Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
    End Class
@@ -62,6 +70,14 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
          ' inserisco in lista
          CsvPartList.Add(OnePart)
@@ -147,6 +163,22 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
                   End If
@@ -188,6 +220,14 @@ Friend Module CSVFile
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
          Next
          ' Terminatore

CadCuts/CSVPage.xaml.vb

@@ -424,10 +424,14 @@ Public Class CSVPage
          ' Definizione variabili
          Dim dDimX = CurrPart.m_dDimX
          Dim dDimY = CurrPart.m_dDimY
+         Dim dAng = New Double() {CurrPart.m_dAng1,CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4}
+         Dim dHeel = New Double() {CurrPart.m_dHeel1,CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4}
          If bMaxDimOnX And dDimY > dDimX Then
             Dim dTemp As Double = dDimX
             dDimX = dDimY
             dDimY = dTemp
+            dAng = New Double() {CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4,CurrPart.m_dAng1}
+            dHeel = New Double() {CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4,CurrPart.m_dHeel1}
          End If
          EgtLuaSetGlobNumVar("CMP.V1", dDimX)
          EgtLuaSetGlobNumVar("CMP.V2", dDimY)
@@ -439,7 +443,7 @@ Public Class CSVPage
          If nId = GDB_ID.NULL Then Continue For
          CurrPart.m_nId = nId
          ' Muovo la regione in Z per evitare problemi in visualizzazione
-         Dim nRegId = EgtGetFirstNameInGroup(nId, NAME_REGION)
+         Dim nRegId As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
          EgtMove(nRegId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
          ' Eventuale testo per indicare il sopra
          If Not bMaxDimOnX Then
@@ -447,6 +451,31 @@ Public Class CSVPage
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
             EgtSetColor(nText, New Color3d( 0, 0, 0))
          End If
+         ' Inserisco eventuali angoli di fianco
+         Dim bSideAngs As Boolean = False
+         Dim nOutLoopId As Integer = EgtGetFirstNameInGroup( nId, NAME_OUTLOOP)
+         For nSide As Integer = 1 To 4
+            Dim dSideAng As Double = dAng( nSide - 1)
+            Dim dSideHeel As Double = dHeel( nSide - 1)
+            If Math.Abs( dSideAng) > EPS_ANG_SMALL Then
+               Dim nEntId As Integer = EgtGetFirstNameInGroup( nOutLoopId, "A" & nSide.ToString())
+               If nEntId <> GDB_ID.NULL Then
+                  bSideAngs = True
+                  ' Assegno valori
+                  EgtSetInfo(nEntId, INFO_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_HEEL, dSideHeel)
+               End If
+            End If
+         Next
+         ' Creo layer per testi nesting
+         If bSideAngs Then
+            Dim TextLayId As Integer = EgtCreateGroup(nId)
+            EgtSetName(TextLayId, SIDE_ANGLE_LAYER)
+            EgtSetColor(TextLayId, New Color3d(0, 0, 128))
+            ' Opero su geometria esterna pezzo
+            SideAngle.WriteSideAngleOnLoop(nOutLoopId, TextLayId)
+         End If
          ' Aggiusto per lavorazioni
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
@@ -568,7 +597,7 @@ Public Class CSVPage
       ' Verifico che il pezzo appartenga a questo Csv
       If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
          ' Cerco il pezzo nella lista dei pezzi
-         For i = 1 To m_CsvPartList.Count()
+         For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
             If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
                ' Se nel grezzo

CadCuts/EditValueWD.xaml

@@ -25,7 +25,7 @@
          <TextBlock Name="ValueTxbl" Grid.Column="1" Grid.Row="0"
             Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="ValueTxBx" Grid.Column="1" Grid.Row="1"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
             <Grid.ColumnDefinitions>

CadCuts/EditValueWD.xaml.vb

@@ -34,10 +34,15 @@ Public Class EditValueWD
    End Sub
 
    Private Sub EditValueWD_Rendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
-      ValueTxBx.Focus()
-      ValueTxBx.OpenKeyboard(ValueTxBx, ValueTxBx)
+      ' ValueTxBx.Focus()
+      ' ValueTxBx.OpenKeyboard(ValueTxBx, ValueTxBx)
    End Sub
 
+   'Private Sub ValueTxBx_Closed(Sender As Object, e As EventArgs) Handles ValueTxBx.EgtClosed
+   '   m_sValue = ValueTxBx.Text
+   '   DialogResult = True
+   'End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_sValue = ValueTxBx.Text
       DialogResult = True

CadCuts/FastGridSlabManager.xaml.vb

@@ -41,7 +41,7 @@ Public Class FastGridSlabManager
       ' Recupero parametri per nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.LoadParams()
       ' Recupero dimensioni pezzi da ini
-      For Index = 1 To 5
+      For Index As Integer = 1 To 5
          GetPieceDimensions(Index)
       Next
       ' Ne imposto i valori

CadCuts/MoveRawPartPage.xaml.vb

@@ -94,7 +94,9 @@ Public Class MoveRawPartPage
       End If
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
-      StepMoveTxBx.Text = LenToString(m_dStep, 3)
+      ' Ricavo la lunghezza del baffo di taglio 
+      m_dStep = SplitAuto.MaxCuttingMustache(m_dStep)
+      StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+1"
       m_dRotation = GetPrivateProfileDouble(S_RAWMOVE, K_RAWROTATION, 30, m_MainWindow.GetIniFile())
       RotationAngleTxBx.Text = DoubleToString(m_dRotation, 3)
       ' Se movimento manuale perpendicolare
@@ -507,7 +509,7 @@ Public Class MoveRawPartPage
          If AngRotList.Count > 0 Then
             Dim bOkRotate As Boolean = False
             ' allora provo a ruotare il pezzo nel verso di rotazione della ventosa
-            For Each AngStep In AngRotList
+            For Each AngStep As Double In AngRotList
                If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -AngStep) Then
                   If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
                      ' riposiziono il pezzo come era prima

CadCuts/NestPageUC.xaml

@@ -101,16 +101,25 @@
          </Button>
          
          <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-         </UniformGrid>
+                <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+            </UniformGrid>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-            Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
          </UniformGrid>
 
       </Grid>

CadCuts/NestPageUC.xaml.vb

@@ -56,11 +56,11 @@ Public Class NestPageUC
 
    Private Sub NestPage_Initialized(sender As Object, e As EventArgs)
       ' Imposto i messaggi letti dal file dei messaggi
-      InsertPartBtn.Content = EgtMsg(MSG_NESTPAGEUC + 1)            'Insert part - Inserisci pezzo
-      StorePartBtn.Content = EgtMsg(MSG_NESTPAGEUC + 2)             'Store part - Parcheggia pezzo
-      RemovePartBtn.Content = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
-      SelectAllBtn.Content = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
-      DeselectAllBtn.Content = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
+      InsertPartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 1)            'Insert part - Inserisci pezzo
+      StorePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 2)             'Store part - Parcheggia pezzo
+      RemovePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
+      SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
+      DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
    End Sub
 
    Private Sub NestPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -132,9 +132,6 @@ Public Class NestPageUC
          Not m_CurrProjPage.m_bSelectCurv Then
          Return
       End If
-
-      '------------------- NUOVA DEFINIZIONE -------------------------
-
       ' provo a riconoscere il valore medio del segmento 
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(False, True, False, False, False)
@@ -176,13 +173,9 @@ Public Class NestPageUC
          End If
          nIdMy = EgtGetNextObjInSelWin()
       End While
-
       Return
-
-      '------------------- NUOVA DEFINIZIONE -------------------------
    End Sub
 
-
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
@@ -201,6 +194,8 @@ Public Class NestPageUC
       While nId <> GDB_ID.NULL
          ' Recupero l'identificativo del pezzo cui appartiene
          Dim nPartId As Integer = EgtGetParent(EgtGetParent(nId))
+         Dim sNamePartId As String = String.Empty
+         EgtGetName(nPartId, sNamePartId)
          Dim bPartInTable As Boolean = (EgtGetParent(nPartId) = m_nRawId)
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
@@ -216,6 +211,83 @@ Public Class NestPageUC
             ' Drag possibile
             m_bDrag = True
             Exit While
+         Else
+            ' verifico se l'elemento selezionato è il nome della tavola
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT AndAlso (sNamePartId = MAIN_TAB Or sNamePartId = SECOND_TAB) Then
+               Dim nRes As Integer = m_MainWindow.m_CadCutPageUC.m_ProjectMgr.ChangeTable()
+               ' se non è stata eseguita nessuna scelta esco dal ciclo 
+               If nRes = 0 Then Exit While
+               ' imposto l'altra tavola
+               Dim sOtherTab = If( sNamePartId = MAIN_TAB, SECOND_TAB, MAIN_TAB)
+               EgtChangeTable( sOtherTab, True)
+               m_CurrProjPage.AdjustAdditionalTable( True)
+               EgtSetMachineLook(MCH_LOOK.TAB)
+               ' aggiorno le lavorazioni
+               UpdateAllMachiningsToolpaths()
+               ' aggiorno i movimenti pezzi tra disposizioni
+               For nI As Integer = 1  To EgtGetPhaseCount()
+                  EgtSetCurrPhase( nI)
+                  Dim nDispId As Integer = EgtGetPhaseDisposition(nI)
+                  SpecialApplyDisposition(nDispId, True)
+               Next
+               ' aggiorno posizionamento ventose per lavorazioni da sotto
+               UpdateVacuumsForDrip()
+               ' dichiaro tutto aggiornato
+               m_CurrProjPage.SetOrderMachiningFlag()
+               EgtSetCurrPhase(1)
+               ' aggiorno posizione pezzi in parcheggio
+               Dim nPPId As Integer = EgtGetFirstPart()
+               While nPPId <> GDB_ID.NULL
+                  PackPartInStore(nPPId)
+                  nPPId = EgtGetNextPart( nPPId)
+               End While
+               ' se prevista rotazione
+               If GetPrivateProfileInt(S_TABLE, K_CHANGETABWD, 0, m_MainWindow.GetMachIniFile()) = 2 Then
+                  ' Dati tavola
+                  Dim b3Tab As New BBox3d
+                  EgtGetTableArea( 1, b3Tab)
+                  ' Box lastra
+                  Dim b3OrigRaw As New BBox3d
+                  GetRawBox( b3OrigRaw)
+                  ' Allargo i limiti della tavola in tutte le fasi
+                  Const TAB_OFFS As Double = 3000
+                  For nI As Integer = 1 To EgtGetPhaseCount()
+                     EgtSetCurrPhase(nI)
+                     EgtSetTableAreaOffset( TAB_OFFS, TAB_OFFS, TAB_OFFS, TAB_OFFS) 
+                  Next
+                  EgtSetCurrPhase(1)
+                  ' Rotazione
+                  Dim dAngRot As Double = If(sOtherTab = SECOND_TAB, 180, -180)
+                  if Not RotateAllRawParts(dAngRot, False) Then
+                     m_CurrProjPage.SetWarningMessage(EgtMsg(90339))        'Rotazione impossibile
+                  End If
+                  ' Traslazione per riportare la lastra nella stessa posizione rispetto all'angolo BL che diveta TR e viceversa
+                  Dim b3Raw As New BBox3d
+                  GetRawBox( b3Raw)
+                  Dim vtMove As Vector3d
+                  If sOtherTab = SECOND_TAB Then
+                     Dim vtDiffIni As Vector3d = b3OrigRaw.Min() - b3Tab.Min()
+                     Dim vtDiffFin As Vector3d = b3Tab.Max() - b3Raw.Max()
+                     vtMove = vtDiffFin - vtDiffIni
+                  Else
+                     Dim vtDiffIni As Vector3d = b3Tab.Max() - b3OrigRaw.Max()
+                     Dim vtDiffFin As Vector3d = b3Raw.Min() - b3Tab.Min()
+                     vtMove = -( vtDiffFin - vtDiffIni)
+                  End If
+                  vtMove.z = 0
+                  MoveAllRawParts(vtMove)
+                  ' Ripristino i limiti della tavola in tutte le fasi
+                  For nI As Integer = 1 To EgtGetPhaseCount()
+                     EgtSetCurrPhase(nI)
+                     EgtSetTableAreaOffset( 0, 0, 0, 0) 
+                  Next
+                  EgtSetCurrPhase(1)
+                  HideAllMachinings()
+               End If
+               ' visualizzazione
+               EgtZoom(ZM.ALL)
+               Exit While
+            End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
@@ -640,7 +712,7 @@ Public Class NestPageUC
             nId = EgtGetNextSelectedObj()
          End While
       Else
-         RotateAllRawParts(m_dRegAngStep)
+         UserRotateAllRawParts(m_dRegAngStep)
          EgtDraw()
       End If
    End Sub
@@ -658,7 +730,7 @@ Public Class NestPageUC
             nId = EgtGetNextSelectedObj()
          End While
       Else
-         RotateAllRawParts(-m_dRegAngStep)
+         UserRotateAllRawParts(-m_dRegAngStep)
          EgtDraw()
       End If
    End Sub
@@ -710,7 +782,7 @@ Public Class NestPageUC
       End If
    End Function
 
-   Private Sub RotateAllRawParts(dAngDeg As Double)
+   Private Sub UserRotateAllRawParts(dAngDeg As Double)
       ' Recupero rotazione totale
       Dim dRegRot As Double = GetRegistrationRotation()
       ' Verifico se nuova rotazione totale ammissibile
@@ -719,6 +791,13 @@ Public Class NestPageUC
          m_CurrProjPage.SetWarningMessage(EgtMsg(90338))        'Angolo di registrazione oltre i limiti
          Return
       End If
+      Dim bMoveOk As Boolean = RotateAllRawParts( dAngDeg)
+      If Not bMoveOk Then m_CurrProjPage.SetWarningMessage(EgtMsg(90339))        'Rotazione impossibile
+   End Sub
+
+   Friend Function RotateAllRawParts(dAngDeg As Double, Optional bIsReg As Boolean = True) As Boolean
+      ' Recupero rotazione totale
+      Dim dRegRot As Double = GetRegistrationRotation()
       ' Recupero il centro del grezzo iniziale per usarlo come centro della rotazione
       Dim ptCen As New Point3d
       GetRawCenter(ptCen)
@@ -753,7 +832,6 @@ Public Class NestPageUC
       End While
       ' Se rotazione impossibile, ripristino posizione dei grezzi già spostati
       If Not bMoveOk Then
-         m_CurrProjPage.SetWarningMessage(EgtMsg(90339))        'Rotazione impossibile
          Dim nRevPhase As Integer = 1
          Dim nRevRawId As Integer = GDB_ID.NULL
          While nRevPhase <= nPhase
@@ -836,19 +914,29 @@ Public Class NestPageUC
             End If
             nOpeId = EgtGetNextActiveOperation(nOpeId)
          End While
+         ' Se non è registrazione, ruoto anche l'eventuale foto della lastra
+         'If Not bIsReg Then
+         '   Dim nPhotoId = m_CurrProjPage.GetPhoto()
+         '   If nPhotoId <> GDB_ID.NULL then EgtRotatePhoto(nPhotoId, ptCen, Vector3d.Z_AX(), dAngDeg)
+         'End If
          ' Aggiorno rotazione totale
-         SetRegistrationRotation(dRegRot + dAngDeg)
+         If bIsReg Then
+            SetRegistrationRotation(dRegRot + dAngDeg)
+         Else
+            SetRegistrationRotation(0)
+         End If
          ' Dichiaro grezzo per punti
          EgtSetInfo(GetCurrentRaw(), KEY_RAWBYPOINTS, 1)
       End If
       ' Ripristino lo stato iniziale
       EgtSetCurrPhase(1)
       HideAllMachinings()
-   End Sub
+      Return bMoveOk
+   End Function
 
    Private Sub InsertPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertPartBtn.Click
       ' Se inserimento automatico
-      If GetPrivateProfileInt( S_MACH_NEST, K_MACH_NEST_AUTOMATIC, 0, m_MainWindow.GetMachIniFile()) <> 0 And
+      If GetPrivateProfileInt( S_NEST, K_AUTOMATICOPTIMIZE, 0, m_MainWindow.GetIniFile()) <> 0 And
          m_MainWindow.GetAutoNestingOption() Then
          AutomaticInsert()
       ' altrimenti inserimento standard
@@ -933,7 +1021,7 @@ Public Class NestPageUC
       EnableReferenceRegion(bAligned)
       ' Eseguo nesting automatico
       Dim bOpimizeOnX As Boolean = ( GetPrivateProfileInt( S_NEST, K_AUTOMATICOPTIMIZE, 2, m_MainWindow.GetIniFile()) = 1)
-      Dim bGuillotineMode As Boolean = bAligned
+      Dim bGuillotineMode As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_GHIGLIOTTINA, 0, m_MainWindow.GetMachIniFile()) <> 0)
       Dim nAutomaticMaxTime As Integer = GetPrivateProfileInt( S_NEST, K_AUTOMATICMAXTIME, 20, m_MainWindow.GetIniFile())
       Dim dPartTime As Double = If( bGuillotineMode, 1.0, 0.5)
       Dim nMaxTime As Integer = Math.Min( 2.0 + dPartTime * vParts.Count(), nAutomaticMaxTime)
@@ -1080,7 +1168,7 @@ Public Class NestPageUC
          nLayId = EgtGetNextName(nLayId, NAME_INLOOP)
       End While
       ' Aggiorno le entità con tallone e quelle con angolo esterno
-      Const AGG_DEPTH As Double = 2.0
+      Const AGG_DEPTH As Double = 0.75
       Dim bSizeOnTop As Boolean = ( GetPrivateProfileInt( S_SIDES, K_SIZEALWAYSONTOP, 0, m_MainWindow.GetIniFile()) <> 0) 
       For Each nEnt As Integer In vEnt
          ' Se aggiornamento vietato, vado oltre
@@ -1106,12 +1194,14 @@ Public Class NestPageUC
                      EgtSetInfo(nEnt, INFO_OFFSET2, 0)
                   End If
                   EgtSetInfo(nEnt, INFO_DEPTH2, (dTh - dHeel) + AGG_DEPTH)
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
                ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
             ' Inclinazione interna
             Else
@@ -1120,12 +1210,14 @@ Public Class NestPageUC
                   EgtSetInfo(nEnt, INFO_OFFSET, dHeel * Math.Tan(-dSideAng * Math.PI / 180))
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtSetInfo(nEnt, INFO_DEPTH2, dHeel + AGG_DEPTH)
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
                ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET)
                   EgtRemoveInfo(nEnt, INFO_SIDE_ANGLE2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
             End If
          ' Se altrimenti inclinazione esterna

CadCuts/SplitAuto.vb

@@ -5,6 +5,11 @@ Public Module SplitAuto
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private m_dLastDT As Double = 0
+   Public ReadOnly Property dLastDT As Double
+      Get
+         Return m_dLastDT
+      End Get
+   End Property
 
    '-----------------------------------------------------------------------------------------------
    Friend Class SplitMach
@@ -52,7 +57,7 @@ Public Module SplitAuto
                Dim sInfo As String = String.Empty
                If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
                   Dim sItems() As String = sInfo.Split(",".ToCharArray)
-                  For Each sId In sItems
+                  For Each sId As String In sItems
                      Dim nId As Integer = 0
                      StringToInt(sId, nId)
                      If nId > 0 Then Mach.m_vOthId.Add(nId)
@@ -161,6 +166,17 @@ Public Module SplitAuto
    End Function
 
    '-----------------------------------------------------------------------------------------------
+   ' calcolo il numero di tipi di lavorazioni
+   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
+      If MachSplit.m_nType = MCH_OY.SAWING Then
+         nCountSawing += 1
+      ElseIf MachSplit.m_nType = MCH_OY.WATERJETTING Then
+         nCountWaterjetting += 1
+      Else
+         nCountOtherMachining += 1
+      End If
+   End Sub
+
    Friend Sub ColorMachining(MachSplit As SplitMach, Optional bReset As Boolean = False)
       EgtDisableModified()
       ' Assegno stato
@@ -268,7 +284,7 @@ Public Module SplitAuto
             Dim sInfo As String = String.Empty
             If EgtGetInfo(nOpeId, INFO_MCH_OTHMID, sInfo) Then
                Dim sItems() As String = sInfo.Split(",".ToCharArray)
-               For Each sId In sItems
+               For Each sId As String In sItems
                   Dim nId As Integer = GDB_ID.NULL
                   StringToInt(sId, nId)
                   Dim nPvId2 As Integer = GDB_ID.NULL
@@ -298,7 +314,7 @@ Public Module SplitAuto
             Dim sInfo As String = String.Empty
             If EgtGetInfo(nOpeId, INFO_MCH_OTHMID, sInfo) Then
                Dim sItems() As String = sInfo.Split(",".ToCharArray)
-               For Each sId In sItems
+               For Each sId As String In sItems
                   Dim nId As Integer = GDB_ID.NULL
                   StringToInt(sId, nId)
                   Dim nPvId2 As Integer = GDB_ID.NULL
@@ -384,7 +400,7 @@ Public Module SplitAuto
             Dim sInfo As String = String.Empty
             If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
                Dim sItems() As String = sInfo.Split(",".ToCharArray)
-               For Each sId2 In sItems
+               For Each sId2 As String In sItems
                   Dim nId2 As Integer = 0
                   StringToInt(sId2, nId2)
                   If nId2 > 0 Then EgtChangeOperationPhase(nId2, nNewPhase)
@@ -737,35 +753,55 @@ Public Module SplitAuto
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
+      ' Spostamento originale
+      Dim vtOriMove As New Vector3d( vtMove)
+      ' Livello di movimento
+      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
-      If Not EgtMoveRawPart(nRawId, vtMove) Then Return False
+      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
       ' Se interferisce con altri grezzi, annullo movimento ed esco con errore
       If Not VerifyRawWithOtherRaws(nRawId, dMindist) Then
-         EgtMoveRawPart(nRawId, -vtMove)
+         EgtMoveRawPart(nRawId, -vtOriMove)
          Return False
       End If
+      If nMoveLevel < 2 Then Return True
       ' Provo ad aggiungere un altro movimento
-      If EgtMoveRawPart(nRawId, vtMove) Then
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += vtMove
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -vtMove)
+            EgtMoveRawPart(nRawId, -vtOriMove)
+         End If
+      End If
+      ' Provo ad aggiungere un altro movimento
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
+         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
+         Else
+            EgtMoveRawPart(nRawId, -vtOriMove)
          End If
       End If
       ' Provo ad aggiungere un movimento dimezzato
-      If EgtMoveRawPart(nRawId, 0.5 * vtMove) Then
+      If EgtMoveRawPart(nRawId, 0.5 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.5 * vtMove
+            vtMove += 0.5 * vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then return True
          Else
-            EgtMoveRawPart(nRawId, -0.5 * vtMove)
+            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If
       End If
-      ' Provo ad aggiunger un movimento 1/4
-      If EgtMoveRawPart(nRawId, 0.25 * vtMove) Then
+      ' Provo ad aggiungere un movimento 1/4
+      If EgtMoveRawPart(nRawId, 0.25 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.25 * vtMove
+            vtMove += 0.25 * vtOriMove
          Else
-            EgtMoveRawPart(nRawId, -0.25 * vtMove)
+            EgtMoveRawPart(nRawId, -0.25 * vtOriMove)
          End If
       End If
       Return True
@@ -811,10 +847,36 @@ Public Module SplitAuto
          End If
       Next
       ' Cancello curve offset
-      For i = 0 To nCount - 1
+      For i As Integer = 0 To nCount - 1
          EgtErase(nOffsId + i)
       Next
       Return (Not bInterf)
    End Function
 
+   Public Function MaxCuttingMustache(dMustache As Double) As Double
+      Dim MachSplitList As New List(Of SplitMach)
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se non è stata creata nessuna lista allora restituisco il valore di Default
+      If Not CalculateSplitMachList(nCurrPhase, MachSplitList) Then Return dMustache
+      Dim NewMustache As Double = 0
+      Dim ItemMachSplit As SplitMach
+      For Each ItemMachSplit In MachSplitList
+         ' Recupero lunghezza baffo secondo taglio
+         Dim nPvId As Integer = GDB_ID.NULL
+         EgtGetInfo(EgtGetFirstNameInGroup(ItemMachSplit.m_nId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+         Dim dDT As Double
+         If EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT) Then
+            If NewMustache < dDT Then NewMustache = dDT
+         End If
+      Next
+      Dim dExtraL As Double = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTRALONCUTREG, dExtraL)
+      ' se esiste il valore di un baffo allora sovrascrivo il valore di default
+      If NewMustache > 0 Then
+         dMustache = Math.Ceiling(NewMustache)
+      End If
+      Return dMustache + dExtraL
+   End Function
+
 End Module

CadCuts/SplitPageUC.xaml

@@ -100,9 +100,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
@@ -113,11 +119,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+                <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
       </Grid>
 
@@ -139,18 +151,42 @@
          </Grid.ColumnDefinitions>
 
 
-         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifEndBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+            <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
       </Grid>
 

Constants/ConstGen.vb

@@ -67,6 +67,8 @@ Module ConstGen
    Public Const MACHININGS_DIR As String = "Machinings"
    ' Nome file Dati delle lucidature
    Public Const KITS_FILE As String = "Kits.data"
+   ' Nome file Dati per waterJet
+   Public Const WATERJETDB_FILE As String = "WaterjetDB.data"
 
    ' File dei pezzi rovinati
    Public Const CURR_RUINED_EPL As String = "RuinedParts.epl"
@@ -203,6 +205,7 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public CONST INFO_AGG2 As String = "Agg2"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -244,6 +247,8 @@ Module ConstGen
    Public Const INFO_MCH_USER_SAL As String = "Usal"
    ' Info allungamento finale lavorazione imposto dall'utente
    Public Const INFO_MCH_USER_EAL As String = "Ueal"
+   ' Info lavorazione di tipo pretaglio sull'uscita
+   Public Const INFO_MCH_EPC As String = "EPC"
    ' Nome contorno taglio
    Public Const NAME_PV_CUT As String = "CUT"
    ' Nome contorno pre-taglio
@@ -332,6 +337,8 @@ Module ConstGen
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 
@@ -341,6 +348,9 @@ Module ConstGen
    ' Lunghezza libera infinita
    Public Const FREELEN_INF = 9999
 
+   ' Costante per lunghezza gambo di lama
+   Public Const STEM = 131072
+
    ' Colori per lavorazioni
    Public Function COL_MCH_CUT() As Color3d
       Return New Color3d(0, 255, 0)

Constants/ConstIni.vb

@@ -45,6 +45,7 @@ Module ConstIni
    Public Const K_VIRTUALKEYBOARD As String = "VirtualKeyboard"
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
+   Public Const K_TEST As String = "Test"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -79,6 +80,13 @@ Module ConstIni
    Public Const K_ZOOMWIN As String = "ZoomWin"
    Public Const K_DISTLINE As String = "DistLine"
 
+   Public Const S_ALZFRONT As String = "Alz&Front"
+   Public Const K_ALZFRONT As String = "Alz&Front"
+   Public Const K_ALZ_HEIGHT As String = "A_Height"
+   Public Const K_ALZ_DELTA_ANG As String = "A_DeltaAng"
+   Public Const K_FRONT_HEIGHT As String = "F_Height"
+   Public Const K_FRONT_DELTA_ANG As String = "F_DeltaAng"
+
    Public Const S_GRID As String = "Grid"
    Public Const K_SHOWGRID As String = "ShowGrid"
    Public Const K_SHOWFRAME As String = "ShowFrame"
@@ -97,6 +105,15 @@ Module ConstIni
    Public Const K_TRFDATA As String = "TrfData"
    Public Const K_CSVDATA As String = "CsvData"
    Public Const K_COMPODIR As String = "CompoDir"
+   Public Const K_CMP_COUNT As String = "Count"
+   Public Const K_LASTCOLOR As String = "LastColor"
+   Public Const K_COLOR As String = "Color"
+
+   Public Const S_EXTCOMPO As String = "Compo"
+
+   Public Const S_INTCOMPO As String = "InternalCompo"
+   Public Const K_INT_COMPODIR As String = "CompoDir"
+   Public Const K_INT_COUNT As String = "Count"
 
    Public Const S_FLATPARTS As String = "FlatParts"
    Public Const K_FLPCURRDIR As String = "CurrDir"
@@ -132,6 +149,9 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
 
+   Public Const S_SPLIT As String = "Split"
+   Public Const K_MOVE_LEV As String = "MoveLevel"
+
    Public Const S_CSV As String = "Csv"
    Public Const K_FULL As String = "Full"
    Public Const K_MAXDIMONX As String = "MaxDimOnX"

Constants/ConstMachIni.vb

@@ -37,14 +37,18 @@
    Public Const K_PATH_HMI As String = "PathHmi"
    Public Const K_USENEWMDI As String = "UseNewMDI"
    Public Const K_ISSIEMENSONE As String = "IsSiemensOne"
+   Public Const K_ISACTIVEMODESUBSCR As String = "IsActiveModeSubscr"
    Public Const K_DBVARPATH As String = "DBVarPath"
+   Public Const K_NEWWRITECNCMODE As String = "NewWriteCNCMode"
 
    Public Const S_NCNUM As String = "NcNUM"
    Public Const K_RESETSENDDELAY As String = "ResetSendDelay"
+   Public Const K_THREADSLEEP As String = "ThreadSleep"
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
+   Public Const K_WRITECNCMODEVAR As String = "WriteCNCModeVar"
    Public Const K_COMM As String = "Comm"
    Public Const K_REFRESH As String = "Refresh"
    Public Const K_MODE As String = "Mode"
@@ -101,10 +105,12 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
-   Public Const K_XYAXES As String = "XYAxes"
-   Public Const K_ZAXES As String = "ZAxes"
-   Public Const K_BCAXES As String = "BCAxes"
+   Public Const K_XYJOG As String = "XYJog"
+   Public Const K_ZCJOG As String = "ZCJog"
+   Public Const K_ZBJOG As String = "ZBJog"
    Public Const K_POWERON As String = "PowerON"
+   Public Const K_POWEROFF As String = "PowerOFF"
+   Public Const K_REMOTE As String = "Remote"
 
    Public Const S_PRODUCTIONLINE As String = "ProductionLine"
    Public Const K_ACTIVE As String = "Active"
@@ -136,6 +142,7 @@
    Public Const K_TAB2_ADDITIONALTABLE As String = "Tab2AdditionalTable"
    Public Const K_TAB3_ADDITIONALTABLE As String = "Tab3AdditionalTable"
    Public Const K_CENTER_RAW_ONX As String = "CenterRawOnX"
+   Public Const K_CHANGETABWD As String = "ChangeTabWD"
 
    Public Const S_PHOTO As String = "Photo"
    Public Const K_PHOTO_OFFSETX As String = "OffsetX"
@@ -186,6 +193,7 @@
    Public Const K_MACH_REDUCEDDEPTH As String = "ReducedDepth"
    Public Const K_MACH_EXTARCMINRAD As String = "ExtArcMinRad"
    Public Const K_MACH_INTARCMAXSIDEANG As String = "IntArcMaxSideAng"
+   Public Const K_MACH_PRECUTEXIT As String = "PreCutExit"
    Public Const K_MACH_MILLING_ON_CORNERS As String = "MillingOnCorners"
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
@@ -193,7 +201,7 @@
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
-   Public Const K_MACH_NEST_AUTOMATIC As String = "Automatic"
+   Public Const K_MACH_NEST_GHIGLIOTTINA As String = "Guillotine"
    Public Const K_MACH_WASHING As String = "Washing"
    Public Const K_MACH_SACPROBE As String = "SacProbe"
    Public Const K_MACH_ENABLERESTART As String = "EnableRestart"
@@ -201,12 +209,16 @@
    Public Const K_MACH_CUTFSEVENABLE As String = "CutFsevEnable"
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
+   Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
    ' MinDistHeadsMultiCut
    ' MinSawRbHeight
 
+   Public Const S_MACH_FRAME As String = "Frame"
+   Public Const K_MACH_PAUSE As String = "Pause"
+
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
@@ -265,6 +277,7 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQualilty"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -78,7 +78,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_SPINDLE Then
             SpindleButton = MachineButton
          End If
@@ -90,7 +90,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub LaserStateChanged(LaserState As Boolean)
       Dim LaserButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_LASER Then
             LaserButton = MachineButton
          End If
@@ -102,7 +102,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub FeedHoldChanged(FeedHoldState As Boolean)
       Dim FeedHoldButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_FEEDHOLD Then
             FeedHoldButton = MachineButton
          End If
@@ -114,7 +114,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub SpeedHoldChanged(SpeedHoldState As Boolean)
       Dim SpeedHoldButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_SPEEDHOLD Then
             SpeedHoldButton = MachineButton
          End If
@@ -126,7 +126,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub LaserTracStateChanged(LaserTracState As Boolean)
       Dim LaserTracButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_LASERTRAC Then
             LaserTracButton = MachineButton
          End If
@@ -138,7 +138,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub CoolantStateChanged(CoolantState As Boolean)
       Dim CoolantButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_COOLANT Then
             CoolantButton = MachineButton
          End If
@@ -150,7 +150,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub InternalCoolantStateChanged(InternalCoolantState As Boolean)
       Dim IntCoolantButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_INTERNALCOOLANT Then
             IntCoolantButton = MachineButton
          End If
@@ -162,7 +162,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub ExternCoolantStateChanged(ExternCoolantState As Boolean)
       Dim ExtCoolantButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_EXTERNCOOLANT Then
             ExtCoolantButton = MachineButton
          End If
@@ -175,7 +175,7 @@ Public Class ControlsMachineButtonUC
    Friend Sub CBAxesStateChanged(CBAxesState As Boolean)
       Dim CAxesButton As TwoStateButton = Nothing
       Dim BAxesButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_CAXES Then
             CAxesButton = MachineButton
          ElseIf MachineButton.StateFlag = K_BAXES Then
@@ -192,7 +192,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub AirBlowStateChanged(AirBlowState As Boolean)
       Dim AirBlowButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_AIRBLOW Then
             AirBlowButton = MachineButton
          End If
@@ -204,7 +204,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub HomeStateChanged(HomeState As Boolean)
       Dim HomeButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_HOME Then
             HomeButton = MachineButton
          End If
@@ -216,7 +216,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub TableUpChanged(TableUpState As Boolean)
       Dim TableUpButton As PressedCommandButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_TABLEUP Then
             TableUpButton = MachineButton
          End If
@@ -228,7 +228,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub TableDownChanged(TableDownState As Boolean)
       Dim TableDownButton As PressedCommandButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_TABLEDOWN Then
             TableDownButton = MachineButton
          End If
@@ -240,7 +240,7 @@ Public Class ControlsMachineButtonUC
 
    Friend Sub HSMChanged(HsmState As Boolean)
       Dim HsmButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_HSM Then
             HsmButton = MachineButton
          End If
@@ -253,7 +253,7 @@ Public Class ControlsMachineButtonUC
    Friend Sub DoorClosedChanged(DoorClosedState As Integer)
       Dim DoorClosedButton As ThreeStateButton = Nothing
       Dim DoorOpenedButton As ThreeStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
             'If TypeOf MachineButton Is NoStateButton Then
             '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
@@ -295,7 +295,7 @@ Public Class ControlsMachineButtonUC
    Friend Sub LimitZChanged(LimitZState As Boolean)
       Dim TwoLimitZButton As TwoStateButton = Nothing
       Dim DoubleLimitZButton As DoubleCommandButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_LIMITZ Then
             If TypeOf MachineButton Is DoubleCommandButton Then
                DoubleLimitZButton = MachineButton
@@ -315,7 +315,7 @@ Public Class ControlsMachineButtonUC
    Friend Sub FiveAxisStateChanged(FiveAxisState As Boolean)
       Dim ThreeAxesButton As TwoStateButton = Nothing
       Dim FiveAxesButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_THREEAXES Then
             ThreeAxesButton = MachineButton
          ElseIf MachineButton.StateFlag = K_FIVEAXES Then
@@ -475,7 +475,7 @@ Public MustInherit Class MachineButton
                If m_CN.m_NewVariable And m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
                   ' solo per Flexium
                   m_CN.DPlcVariables_WriteVariables(ENumber, EValue)
-                  If Not IsNothing(ENumber2) And Not IsNothing(EValue2) Then
+                  If Not String.IsNullOrEmpty(ENumber2) And Not String.IsNullOrEmpty(EValue2) Then
                      m_CN.DPlcVariables_WriteVariables(ENumber2, EValue2)
                   End If
                   ' altrimenti scrittura delle variabili E

DirectCuts/CopyTemplateUC.xaml

@@ -35,10 +35,11 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="Point1Btn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -55,10 +56,12 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="LineBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ArcBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="LineBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource LineaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ArcBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ArcoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
 
          </Grid>
 
@@ -69,14 +72,18 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+                <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource Rimuovi-segmentoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource ChiudiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
-            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10"  Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource Salva-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
             <Button Name="ExitBtn" Grid.Column="2" Grid.Row="10" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>

DirectCuts/CopyTemplateUC.xaml.vb

@@ -49,12 +49,12 @@ Public Class CopyTemplateUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      LineBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
-      ArcBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
-      RemoveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
-      CloseBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
-      SaveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      LineBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
+      ArcBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
+      RemoveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
+      CloseBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
+      SaveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
    End Sub
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded

DirectCuts/DirectCutPageUC.xaml

@@ -28,7 +28,7 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
             <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
@@ -60,24 +60,127 @@
                <RowDefinition Height="1*"/>
                <RowDefinition Height="1*"/>
                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
-            <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="SingleCutBtn" Grid.Row="1"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="MultipleCutBtn" Grid.Row="2"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="GridCutBtn" Grid.Row="3"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="FlatteningCutBtn" Grid.Row="4"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="PolishingBtn" Grid.Row="5"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="CopyTemplateBtn" Grid.Row="6"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="SawTestBtn" Grid.Row="7"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
+               <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+                <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="ManualTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SingleCutBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="MultipleCutBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="GridCutBtn" Grid.Row="3"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="GridCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+
+                <Button Name="SingleDrillBtn" Grid.Row="4"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="FlatteningCutBtn" Grid.Row="5"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+             
+                <Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="CopyTemplateBtn" Grid.Row="7"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>
+             
+            <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+            </Button>
+
+        </Grid>
       
       </Grid>
       
@@ -97,7 +200,8 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="4*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -115,22 +219,27 @@
           <!--Comando asse X-Y-->
           <ToggleButton Name="XYBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-            <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+                <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
           
-          <!--Comando asse Z-->
-          <ToggleButton Name="ZBtn" Grid.Column="3"   
+          <!--Comando asse Z-C-->
+          <ToggleButton Name="ZCBtn" Grid.Column="3"   
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+              <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
           </ToggleButton>
 
-          <!--Comando asse B-C-->
-          <ToggleButton Name="BCBtn" Grid.Column="4"
+         <!--Comando asse Z-B-->
+         <ToggleButton Name="ZBBtn" Grid.Column="4"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
+                <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
 
-            <Button Name="ManualModeBtn" Grid.Column="7"
+         <!--Comando Remote-->
+         <ToggleButton Name="RemoteBtn" Grid.Column="5"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+         </ToggleButton>
+         <Button Name="ManualModeBtn" Grid.Column="8"
                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -8,6 +8,7 @@ Public Class DirectCutPageUC
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
    Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
    ' nuova finestra per i comandi per il taglio manuale nuovo
    Friend m_SingleCutAuto As SingleCutAuto
    Friend m_MultipleCut As MultipleCut
@@ -18,6 +19,7 @@ Public Class DirectCutPageUC
    Friend m_SawTest As SawTestUC
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
    Friend m_nMachLook As Integer = MCH_LOOK.ALL
@@ -37,7 +39,7 @@ Public Class DirectCutPageUC
    Friend m_bManulaCut As Boolean = False
 
    ' elenco dei nuovi bottoni
-   Private m_ButtonAxesList As New List(Of MachineButton)
+   Private m_ButtonJogList As New List(Of MachineButton)
 
    Enum DirectCutPages
       DirectCut
@@ -50,6 +52,7 @@ Public Class DirectCutPageUC
       CopyTemplate
       SawTest
       SingleCutAuto
+      SingleDrill
    End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
@@ -60,6 +63,7 @@ Public Class DirectCutPageUC
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
       m_SingleCut = New SingleCutUC
+      m_SingleDrill = New SingleDrillUC
       m_MultipleCut = New MultipleCut
       m_GridCut = New GridCut
       m_FlatteningCut = New FlatteningCut
@@ -73,13 +77,14 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 6)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
       If m_bManulaCut Then
          m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
       Else
          m_SingleCut.SetValue(Grid.RowProperty, 1)
       End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
       m_MultipleCut.SetValue(Grid.RowProperty, 1)
       m_GridCut.SetValue(Grid.RowProperty, 1)
       m_FlatteningCut.SetValue(Grid.RowProperty, 1)
@@ -89,15 +94,14 @@ Public Class DirectCutPageUC
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
-      Dim bCollpsedNewBottonsConsole As Boolean = False
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
+      Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
-         ' per le configurazioni diverse dalla Digitale5
-         bCollpsedNewBottonsConsole = True
       End If
 
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
@@ -105,32 +109,55 @@ Public Class DirectCutPageUC
          ManualModeBtn.Visibility = Windows.Visibility.Hidden
       End If
 
-      ManualBtn.Content = EgtMsg( 90201)
-      SingleCutBtn.Content = EgtMsg(90202)
-      MultipleCutBtn.Content = EgtMsg( 90203)
-      GridCutBtn.Content = EgtMsg( 90204)
-      FlatteningCutBtn.Content = EgtMsg( 90206)
-      PolishingBtn.Content = EgtMsg( 90231)
-      CopyTemplateBtn.Content = EgtMsg( 90209)
-      SawTestBtn.Content = EgtMsg(90207)
+      ' ManualBtn.Content = EgtMsg(90201)
+      ManualTxt.Text = EgtMsg(90201)
+      'SingleCutBtn.Content = EgtMsg(90202)
+      SingleCutTxt.Text = EgtMsg(90202)
+      'SingleDrillBtn.Content = "Foro singolo"
+      SingleDrillTxt.Text = EgtMsg(90258)
+      'MultipleCutBtn.Content = EgtMsg(90203)
+      MultipleCutTxt.Text = EgtMsg(90203)
+      'GridCutBtn.Content = EgtMsg(90204)
+      GridCutTxt.Text = EgtMsg(90204)
+      'FlatteningCutBtn.Content = EgtMsg(90206)
+      FlatteningCutTxt.Text = EgtMsg(90206)
+      'PolishingBtn.Content = EgtMsg(90231)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SawTestBtn.Content = EgtMsg(90207)
+      SawTestTxt.text = EgtMsg(90207)
 
-      ' nuovi bottoni 20/05/2021
-      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollpsedNewBottonsConsole Then
-         XYBtn.Content = "X - Y"
-         ZBtn.Content = "Z"
-         BCBtn.Content = "B - C"
-      Else
-         XYBtn.Visibility = Windows.Visibility.Collapsed
-         ZBtn.Visibility = Windows.Visibility.Collapsed
-         BCBtn.Visibility = Windows.Visibility.Collapsed
-      End If
+
+      ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
+      ' leggo il numero di assi attivi nella macchina
+      Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
+
+      '' leggo se è stata configurata la nuova conole
+      'If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollapsedNewBottonsConsole Then
+      '   XYBtn.Content = "X - Y"
+      '   XYBtn.Foreground = Brushes.White
+      '   ZCBtn.Content = "Z - C"
+      '   ZCBtn.Foreground = Brushes.White
+      '   If AxesNumber < 5 Then
+      '      ZBBtn.Visibility = Windows.Visibility.Collapsed
+      '   End If
+      '   ZBBtn.Content = "Z - B"
+      '   ZBBtn.Foreground = Brushes.White
+      '   RemoteBtn.Content = "Remote"
+      '   RemoteBtn.Foreground = Brushes.White
+      'Else
+      '   XYBtn.Visibility = Windows.Visibility.Collapsed
+      '   ZCBtn.Visibility = Windows.Visibility.Collapsed
+      '   ZBBtn.Visibility = Windows.Visibility.Collapsed
+      'End If
 
    End Sub
 
    Private Sub DirectCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
-      '------ NUOVI BOTTONI ----------
+      '------ INIZIO NUOVI BOTTONI ----------
       ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
-      m_ButtonAxesList.Clear()
+      m_ButtonJogList.Clear()
       Dim m_nCount As Integer = 1
       Dim bFoundBtn As Boolean = True
       While bFoundBtn
@@ -141,7 +168,7 @@ Public Class DirectCutPageUC
          Dim sFImageName As String = String.Empty
          Dim sFLuaScriptName As String = String.Empty
          Dim sStateFlag As String = String.Empty
-         bFoundBtn = m_ControlsMachineButton.GetPrivateProfileMachineButtons("AxesButtons", sNameBtn, sMachineButtonType, sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag, m_MainWindow.GetMachIniFile())
+         bFoundBtn = m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", sNameBtn, sMachineButtonType, sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag, m_MainWindow.GetMachIniFile())
          If bFoundBtn Then
             m_nCount += 1
             Dim ButtonToAdd As MachineButton = Nothing
@@ -159,13 +186,15 @@ Public Class DirectCutPageUC
                   ButtonToAdd = New PressedCommandButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
             End Select
             If Not IsNothing(ButtonToAdd) Then
-               m_ButtonAxesList.Add(ButtonToAdd)
+               m_ButtonJogList.Add(ButtonToAdd)
             End If
          End If
       End While
+      ' attivo la visualizzazione dei comandi
+      SetVisibilityJogButtuns()
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
+      '----------- FINE NUOVI BOTTONI------------
 
-      '-----------NUOVI BOTTONI------------
       ' Se rientro da simulazione
       If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
          LeftButtonGrid.Children.Add(m_SingleCut)
@@ -188,6 +217,9 @@ Public Class DirectCutPageUC
       ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
          LeftButtonGrid.Children.Add(m_SawTest)
          Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
       End If
 
       ' Caso standard
@@ -206,6 +238,7 @@ Public Class DirectCutPageUC
       End If
       MultipleCutBtn.IsEnabled = bRawOk
       GridCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = bRawOk
       FlatteningCutBtn.IsEnabled = bRawOk
       PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
       SawTestBtn.IsEnabled = bRawOk
@@ -216,6 +249,35 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Private Sub SetVisibilityJogButtuns()
+      XYBtn.Visibility = Visibility.Collapsed
+      ZCBtn.Visibility = Visibility.Collapsed
+      ZBBtn.Visibility = Visibility.Collapsed
+      RemoteBtn.Visibility = Visibility.Collapsed
+
+      Dim Item As MachineButton = Nothing
+      For Each Item In m_ButtonJogList
+         Select Case Item.StateFlag.Trim
+            Case K_XYJOG
+               XYBtn.Visibility = Visibility.Visible
+               XYBtn.Foreground = Brushes.White
+               XYBtn.ToolTip = "X - Y"
+            Case K_ZCJOG
+               ZCBtn.Visibility = Visibility.Visible
+               ZCBtn.Foreground = Brushes.White
+               ZCBtn.ToolTip = "Z - C"
+            Case K_ZBJOG
+               ZBBtn.Visibility = Visibility.Visible
+               ZBBtn.Foreground = Brushes.White
+               ZBBtn.ToolTip = "Z - B"
+            Case K_REMOTE
+               RemoteBtn.Visibility = Visibility.Visible
+               RemoteBtn.Foreground = Brushes.White
+               RemoteBtn.Content = "Remote"
+         End Select
+      Next
+   End Sub
+
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -223,7 +285,7 @@ Public Class DirectCutPageUC
          If Not m_MainWindow.m_Camera.CameraClick() Then
             m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(90313))    'Fotografia non riuscita
          End If
-      ' Altrimenti lancio browser di immagini
+         ' Altrimenti lancio browser di immagini
       Else
          m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
          m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_PhotoPage)
@@ -286,6 +348,11 @@ Public Class DirectCutPageUC
       m_ActiveDirectCutPage = DirectCutPages.SawTest
    End Sub
 
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
@@ -315,65 +382,134 @@ Public Class DirectCutPageUC
 
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
-      Dim XYAxesButton As MachineButton = m_ButtonAxesList(0)
+      ' riverco in elenco il bottone XYJog
+      Dim XYJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_XYJOG Then
+            XYJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(XYJogButton) Then Return
       ' eseguo lo script lua associato
-      XYAxesButton.ExecuteMDICommand(XYAxesButton.TLuaScriptName)
+      XYJogButton.ExecuteMDICommand(XYJogButton.TLuaScriptName)
       ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
    End Sub
 
-   Friend Sub XYAxesChanged(bXYAxes As Boolean)
+   Friend Sub XYJogChanged(bXYAxes As Boolean)
       ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
-      Dim XYAxesButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonAxesList
-         If MachineButton.StateFlag = "XYAxes" Then
-            XYAxesButton = MachineButton
+      Dim XYJogButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         ' elimino gli spazi ad inizio e fine della stringa
+         If MachineButton.StateFlag.Trim = K_XYJOG Then
+            XYJogButton = MachineButton
+            Exit For
          End If
       Next
-      If Not IsNothing(XYAxesButton) Then
-         XYAxesButton.SetIsChecked(bXYAxes)
+      If Not IsNothing(XYJogButton) Then
+         XYJogButton.SetIsChecked(bXYAxes)
          XYBtn.IsChecked = bXYAxes
       End If
    End Sub
 
-   Private Sub ZBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBtn.Click
-      Dim ZAxesButton As MachineButton = m_ButtonAxesList(1)
-      ' eseguo lo script lua associato
-      ZAxesButton.ExecuteMDICommand(ZAxesButton.TLuaScriptName)
-   End Sub
-
-   Friend Sub ZAxesChanged(bZAxes As Boolean)
-      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
-      Dim ZAxesButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonAxesList
-         If MachineButton.StateFlag = "ZAxes" Then
-            ZAxesButton = MachineButton
+   Private Sub ZCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZCBtn.Click
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZCJOG Then
+            ZJogButton = ItemButton
+            Exit For
          End If
       Next
-      If Not IsNothing(ZAxesButton) Then
-         ZAxesButton.SetIsChecked(bZAxes)
-         ZBtn.IsChecked = bZAxes
+      If IsNothing(ZJogButton) Then Return
+      ' eseguo lo script lua associato
+      ZJogButton.ExecuteMDICommand(ZJogButton.TLuaScriptName)
+   End Sub
+
+   Friend Sub ZCJogChanged(bZAxes As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ZJogButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_ZCJOG Then
+            ZJogButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ZJogButton) Then
+         ZJogButton.SetIsChecked(bZAxes)
+         ZCBtn.IsChecked = bZAxes
       End If
    End Sub
 
-   Private Sub BCBtn_Click(sender As Object, e As RoutedEventArgs) Handles BCBtn.Click
-      Dim BCAxesButton As MachineButton = m_ButtonAxesList(2)
-      ' eseguo lo script lua associato
-      BCAxesButton.ExecuteMDICommand(BCAxesButton.TLuaScriptName)
-   End Sub
-
-   Friend Sub BCAxesChanged(bBCAxes As Boolean)
-      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
-      Dim BCAxesButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonAxesList
-         If MachineButton.StateFlag = "BCAxes" Then
-            BCAxesButton = MachineButton
+   Private Sub ZBBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBBtn.Click
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZBJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZBJOG Then
+            ZBJogButton = ItemButton
+            Exit For
          End If
       Next
-      If Not IsNothing(BCAxesButton) Then
-         BCAxesButton.SetIsChecked(bBCAxes)
-         BCBtn.IsChecked = bBCAxes
+      If IsNothing(ZBJogButton) Then Return
+      ' eseguo lo script lua associato
+      ZBJogButton.ExecuteMDICommand(ZBJogButton.TLuaScriptName)
+   End Sub
+
+   Friend Sub ZBJogChanged(bBCAxes As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim BCJogButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_ZBJOG Then
+            BCJogButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(BCJogButton) Then
+         BCJogButton.SetIsChecked(bBCAxes)
+         ZBBtn.IsChecked = bBCAxes
       End If
    End Sub
+
+   Private Sub RemoteBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoteBtn.Click
+      Dim RemoteButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_REMOTE Then
+            RemoteButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(RemoteButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = RemoteButton.TLuaScriptName
+      Else
+         sLuaFileName = RemoteButton.FLuaScriptName
+      End If
+      RemoteButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub RemoteChanged(bRemote As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim RemoteButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_REMOTE Then
+            RemoteButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(RemoteButton) Then
+         RemoteButton.SetIsChecked(bRemote)
+         RemoteBtn.IsChecked = bRemote
+      End If
+   End Sub
+
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
@@ -412,6 +548,8 @@ Public Class DirectCutPageUC
             LeftButtonGrid.Children.Remove(m_CopyTemplate)
          Case DirectCutPages.SawTest
             LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
       End Select
       If ControlsMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Remove(m_ControlsMachineButton)

DirectCuts/FlatteningCut.xaml

@@ -38,12 +38,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -125,12 +130,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/FlatteningCut.xaml.vb

@@ -79,8 +79,8 @@ Public Class FlatteningCut
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -89,8 +89,8 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -444,8 +444,8 @@ Public Class FlatteningCut
       StringToLen(WidthTxBx.Text, dWidth)
       ' Recupero lo spessore della lama corrente
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       ' La larghezza della spianatura nono può essere inferiore allo spessore della lama
       m_dWid = Math.Max(dWidth, dThick)
       WidthTxBx.Text = LenToString(m_dWid, 2)
@@ -472,8 +472,8 @@ Public Class FlatteningCut
 
    Private Sub OverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OverlapTxBx.EgtClosed
       ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       '  Verifico che la sovrapposizione non sia superiore allo spessore della lama (meno 1mm di offset)
       Dim dOverlap As Double = 0
       Const MIN_OFFSET As Double = 1.0
@@ -612,6 +612,22 @@ Public Class FlatteningCut
       m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
+   ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
+   Private Function GetFootPrintTool() As Double
+      Dim dFootPrint As Double = 0
+      ' verifico quale lavorazione è attiva
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
+      ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
+         Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
+         GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         ' recupero informazioni della fresa in uso
+         EgtTdbSetCurrTool(sCurrMill)
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)
+      End If
+      Return dFootPrint
+   End Function
+
    Private Function CreateFlatteningCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
@@ -670,22 +686,21 @@ Public Class FlatteningCut
          RemoveFinalHome()
       End If
       UpdateSimulOkBtn()
-
-
-
       Return m_bCutOk
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
-      ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' Recupero spessore della lama (utensile) correntemente attiva
+      Dim dThick As Double = GetFootPrintTool()
+      If dThick = 0 Then Return False
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
       Dim vtDelta As Vector3d
       vtDelta = Vector3d.FromPolar(1, m_dAngO)
       vtDelta.Rotate(Vector3d.Z_AX, dRotAngO)
+
       ' Calcolo numero di iterazioni necessarie a coprire l'area impostata e lunghezza vettore delta
       Dim nStepNum As Integer
       Dim dDelta As Double

DirectCuts/GridCut.xaml

@@ -34,12 +34,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -131,12 +135,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/GridCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class GridCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
@@ -73,8 +73,8 @@ Public Class GridCut
       NumPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 21)
       DimPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 22)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())

DirectCuts/MachineButtonsUC.xaml.vb

@@ -111,6 +111,22 @@ Public Class MachineButtonsUC
                Catch ex As Exception
                   EgtOutLog("Error loading image " & sImage)
                End Try
+            Else
+               ' In attesa che attivono le icone di questi pulsanti scrivo il contenuto del bottone
+               Try
+                  Dim CurrToggleBtn As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
+                  If StateFlagArray(nIndex) = K_XYJOG Then
+                     CurrToggleBtn.Content = "X - Y"
+                  ElseIf StateFlagArray(nIndex) = K_ZCJOG Then
+                     CurrToggleBtn.Content = "Z - C"
+                  ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
+                     CurrToggleBtn.Content = "Z - B"
+                  ElseIf StateFlagArray(nIndex) = K_REMOTE Then
+                     CurrToggleBtn.Content = "Remote"
+                  End If
+               Catch ex As Exception
+                  EgtOutLog("Error loading content " & StateFlagArray(nIndex))
+               End Try
             End If
          Next
       End If
@@ -534,7 +550,11 @@ Public Class MachineButtonsUC
    End Sub
 
    Friend Sub DoorStateChanged(DoorState As Integer)
-      ' recupero le asscociazioni con i bottoni
+      If IsNothing(DoorState) Then
+         EgtOutLog("Error: door state null!")
+         Return
+      End If
+      ' recupero le associazioni con i bottoni
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_OPENED)
       If nIndex = -1 Then Return
       ' bottone di apertura porte
@@ -544,7 +564,7 @@ Public Class MachineButtonsUC
       ' bottone di chiusura porte
       Dim DoorClosedButton As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
       ' modifico il colore dei bottoni
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorClosedButton) Then
          Select Case DoorState
             Case 0
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
@@ -552,7 +572,7 @@ Public Class MachineButtonsUC
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorOpenedButton) Then
          Select Case DoorState
             Case 0
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
@@ -565,29 +585,38 @@ Public Class MachineButtonsUC
    End Sub
 
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
-   Friend Sub XYAxesChanged(ByVal bXYAxes As Boolean)
+   Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
-      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "XYAxes")
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_XYJOG)
       If nIndex = -1 Then Return
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bXYAxes
    End Sub
 
-   Friend Sub ZAxesChanged(ByVal bZAxes As Boolean)
+   Friend Sub ZJogChanged(ByVal bZAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
-      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "ZAxes")
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_ZCJOG)
       If nIndex = -1 Then Return
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bZAxes
    End Sub
 
-   Friend Sub BCAxesChanged(ByVal bBCAxes As Boolean)
+   Friend Sub BCJogChanged(ByVal bBCAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
-      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "BCAxes")
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_ZBJOG)
       If nIndex = -1 Then Return
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bBCAxes
    End Sub
+
+   Friend Sub RemoteChanged(ByVal bRemote As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_REMOTE)
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bRemote
+   End Sub
+
    '-----------------------------------------------------------------------------------------------------------------
 
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -206,6 +206,7 @@ Public Class ManualAxesMoveUC
       m_CN.MDI_command()
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
+      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
       m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub

DirectCuts/MultipleCut.xaml

@@ -35,12 +35,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -256,12 +261,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/MultipleCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class MultipleCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -72,8 +72,8 @@ Public Class MultipleCut
       NumPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 17)
       DimPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 18)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       Num1TxBl.Text = "1"
       Num2TxBl.Text = "2"
       Num3TxBl.Text = "3"

DirectCuts/Polishing.xaml

@@ -63,12 +63,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/Polishing.xaml.vb

@@ -23,8 +23,8 @@ Public Class Polishing
 
    Private Sub Polishing_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' assegno messaggi
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
    End Sub
 
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded

DirectCuts/SawTestUC.xaml

@@ -37,12 +37,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -80,12 +85,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
    
       </Grid>
 

DirectCuts/SawTestUC.xaml.vb

@@ -58,14 +58,14 @@ Public Class SawTestUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo test
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_LENGTH, m_dLen, m_MainWindow.GetIniFile())

DirectCuts/SingleCutAuto.xaml.vb

@@ -161,7 +161,7 @@ Public Class SingleCutAuto
       ShowCoord()
       ' carico la lista dei materiali lavorabili in macchina
       m_MaterialsList.Clear()
-      For Each Material In m_MainWindow.m_CurrentMachine.Materials
+      For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
          m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
       Next
       ' Carico l'elenco dei materiali presenti in macchina per l'assegnata lavorazione

DirectCuts/SingleCutUC.xaml

@@ -38,11 +38,16 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
-         </Grid>
+            <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -106,10 +111,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/SingleCutUC.xaml.vb

@@ -57,16 +57,16 @@ Public Class SingleCutUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
       SawThChBl.Text = EgtMsg(90232)   ' Spessore lama
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())

DirectCuts/SingleDrillUC.xaml

@@ -0,0 +1,97 @@
+<UserControl x:Class="SingleDrillUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   mc:Ignorable="d" 
+   d:DesignHeight="597.3" d:DesignWidth="256">
+
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+        <!-- Definizione della Grid SingleCut -->
+        <Grid Name="SingleCutGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+
+            </Grid>
+
+            <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+ 
+
+            <Grid Grid.Row="9" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            </Grid>
+
+            <Grid Grid.Row="11" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</UserControl>

DirectCuts/SingleDrillUC.xaml.vb

@@ -0,0 +1,495 @@
+Imports EgtUILib
+Imports System.Collections.ObjectModel
+Public Class SingleDrillUC
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' riferimento alla macchina corrente
+   Private m_CurrentMachine As CurrentMachine
+
+   ' --------------------- VARIABILI PRESENTI NEL TAGLIO SINGOLO ---------------------
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_bPointP1Ok As Boolean = False
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_bPointP2Ok As Boolean = False
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+
+   ' Array delle modalità di acquisizione dei punti
+   Private m_PointsModeArray(2) As String
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   Private m_dDiameter As Double = 0
+
+   Private m_sCurrDrill As String = String.Empty
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+   ' Costanti che indicano la modalità di acquisizione dei punti
+   Private Enum PT_MODE As Integer
+      DRILL = 0
+      LASER = 1
+      DRAW = 2
+   End Enum
+
+   Private Sub SingleCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+
+      ' Variabile che accorcia il riferimento alla macchina corrente
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
+      ' Creo lista modalità di acquisizione punto 
+      m_PointsModeArray(PT_MODE.DRILL) = EgtMsg(90752)
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      ' la associo alla combobox
+      PointModeCmBx.ItemsSource = m_PointsModeArray
+
+      ' Assegno messaggi
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+   End Sub
+
+   Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_sCurrDrill = m_CurrentMachine.sCurrDrill
+      GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
+
+      ' recupero informazioni del foretto usato
+      EgtTdbSetCurrTool(m_sCurrDrill)
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
+
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         ' Aggiorno visualizzazione
+         SetMachineInCurrPos()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+         EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' Reset punto acquisito
+      m_bPointP1Ok = False
+      m_bPointP2Ok = False
+      ' Inizializzo primo punto acquisito dal disegno
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
+      m_ptPrev.z = m_ptRawMax.z
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      ' Imposto modalità di acquisizione punti
+      PointModeCmBx.SelectedIndex = PT_MODE.DRAW
+      SetCoordVisibility(True)
+      ShowCoord()
+      ' Reset taglio e disabilito bottone esecuzione
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+      ' Deseleziono bottone primo punto
+      Point1Btn.IsChecked = False
+      ' Aggiorno visualizzazione
+      EgtDraw()
+   End Sub
+
+   ' esco dalla pagina di foro diretto
+   Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
+      ' deselezione il bottone per acquisizione
+      Point1Btn.IsChecked = False
+      ' Verifico di essere il gestore attivo
+      If Not m_bActive Then Return
+      ' Si può selezionare solo con il tasto sinistro e se stato NULL
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
+         Return
+      End If
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Acquisisco punto da disegno
+      EgtUnProjectPoint(e.Location, m_ptPrev)
+      ' Aggiusto Z punto acquisito (è in globale)
+      Dim dPtPrevZ As Double = m_ptPrev.z
+      m_ptPrev.z = m_ptRawMax.z
+      ' Se direzione di vista calcolabile e da sopra posso aggiustare anche XY
+      Dim dAngVertDeg, dAngHorizDeg As Double
+      If EgtGetGenericView(dAngVertDeg, dAngHorizDeg) Then
+         Dim vtDir As Vector3d = Vector3d.FromSpherical(1, dAngVertDeg, dAngHorizDeg)
+         If vtDir.z > EPS_SMALL Then
+            m_ptPrev.z = dPtPrevZ
+            m_ptPrev += vtDir * (m_ptRawMax.z - m_ptPrev.z) / vtDir.z
+         End If
+      End If
+      ' Visualizzo coordinate (rispetto a 0 tavola)
+      ShowCoord()
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub PointModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles PointModeCmBx.SelectionChanged
+      SetCoordVisibility(PointModeCmBx.SelectedIndex = PT_MODE.DRAW)
+   End Sub
+
+   Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Reset punto non acquisito
+      m_bPointP1Ok = False
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Se acquisizione lama o laser
+      If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
+
+         ' Recupero la posizione macchina
+         Dim dL1, dL2, dL3, dR1, dR2 As Double
+         If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+
+         ' Ricavo dati Foretto corrente
+         Dim sDrill As String = m_sCurrDrill
+         ' Se punto da laser
+         If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
+            ' Imposto come testa corrente il laser (senza utensile ovviamente)
+            If Not EgtSetCalcTool("", "H3", 1) Then Return
+            ' Trasformo in posizione punta utensile in basso
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            ' Ora imposto la lama corrente
+            If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
+            ' Altrimenti da lama
+         Else
+            ' Imposto la lama corrente
+            If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
+            ' Trasformo in posizione punta utensile in basso
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+         End If
+         ' Calcolo direzione asse lama
+         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         ' Porto il tip nell'origine tavola
+         m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+         m_bPointP1Ok = True
+
+         ' Altrimenti punto da click di mouse
+      Else
+         ' Assegno punto selezionato nel disegno a m_ptTipP1
+         m_ptTipP1 = m_ptPrev
+         ' Porto il tip nell'origine tavola
+         m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+         m_bPointP1Ok = True
+         ' Ricavo dati lama corrente
+         Dim sDrill As String = m_sCurrDrill
+         ' Imposto la lama corrente
+         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+      End If
+
+      ' Disegno il taglio
+      CreateSingleDrill()
+      ' Disegno la macchina nella sua posizione reale
+      SetMachineInCurrPos()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
+      EgtDraw()
+      ' Seleziono il bottone per indicare che il primo punto è stato acquisito
+      Point1Btn.IsChecked = True
+   End Sub
+
+   'Private Sub GetDrillFromDrilling(ByRef sCurrDrill As String)
+   '   If String.IsNullOrEmpty(sCurrDrill) Or String.IsNullOrWhiteSpace(sCurrDrill) Then
+   '      ' creo l'elenco degli utensili di foratura
+   '      Dim sToolName As String = String.Empty
+   '      Dim nType As Integer = MCH_TY.NONE
+   '      Dim DrillToolList As New ObservableCollection(Of String)
+   '      DrillToolList.Clear()
+   '      If EgtTdbGetFirstTool(MCH_TF.DRILLBIT, sToolName, nType) Then
+   '         DrillToolList.Add(sToolName)
+   '         While EgtTdbGetNextTool(MCH_TF.DRILLBIT, sToolName, nType)
+   '            DrillToolList.Add(sToolName)
+   '         End While
+   '      End If
+   '      ' recupero l'utensile associato alla lavorazione
+   '      Dim sCurrDrilling As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
+   '      Dim ToolString As String = String.Empty
+   '      EgtMdbSetCurrMachining(sCurrDrilling)
+   '      ' Recupero nome utensile tramite TUUID
+   '      Dim sTuuid As String = String.Empty
+   '      EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
+   '      EgtTdbGetToolFromUUID(sTuuid, ToolString)
+   '      Dim bToolExist As Boolean = False
+   '      For Each CurrTool As IEnumerable In DrillToolList
+   '         If CurrTool.ToString() = ToolString Then
+   '            bToolExist = True
+   '            Exit For
+   '         End If
+   '      Next
+   '      If bToolExist Then
+   '         sCurrDrill = ToolString
+   '      Else
+   '         sCurrDrill = String.Empty
+   '      End If
+   '   End If
+   'End Sub
+
+   Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
+      ' Recupero il valore della coordinata (in 0 Tab)
+      Dim dXcoord As Double = 0
+      StringToLen(XcoordTxBx.Text, dXcoord)
+      XcoordTxBx.Text = LenToString(dXcoord, 2)
+      ' lo assegno al punto corrente (in 0 Macc)
+      m_ptPrev.x = dXcoord + m_ptTabOri.x
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub YcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles YcoordTxBx.EgtClosed
+      ' Recupero il valore della coordinata (in 0 Tab)
+      Dim dYcoord As Double = 0
+      StringToLen(YcoordTxBx.Text, dYcoord)
+      YcoordTxBx.Text = LenToString(dYcoord, 2)
+      ' lo assegno al punto corrente (in 0 Macc)
+      m_ptPrev.y = dYcoord + m_ptTabOri.y
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Disegno crocetta che indica il punto acquisito
+      CreateCross(m_nTempLay, m_ptPrev)
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage( "Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateSingleDrill() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bPointP1Ok Or Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Recupero spessore lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      GetDrillFromDrilling(sDrill, m_MainWindow.m_CurrentMachine.sCurrDrilling)
+      EgtTdbSetCurrTool(sDrill)
+      Dim dDiam As Double = 0
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId = CreateDirectCutPart()
+      Dim nLayerId = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_INLOOP)
+      ' Creo il Drill
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+
+      ' Creo layer per crocetta di riferimento
+      Dim nCrossLayerId = EgtCreateGroup(nPartId)
+      ' Aggiungo crocetta/e
+      If m_bPointP1Ok Then
+         CreateCross(nCrossLayerId, ptStart)
+      End If
+
+      Dim nCutId = EgtCreateCircle(nLayerId, ptStart, m_dDiameter / 2)
+
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   ' crea una croce nel punto indicato e rappresenta il diametro dell'utensile corrente
+   Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ' Aggiungo crocette
+      ptP += New Vector3d(0, 0, 0.15)
+      Dim vtCrossX As New Vector3d(20, 0, 0)
+      Dim vtCrossY As New Vector3d(0, 20, 0)
+      Dim nCrossId1 = EgtCreateLine(nLayerId, ptP + (-vtCrossX), ptP + vtCrossX)
+      EgtSetColor(nCrossId1, New Color3d(255, 0, 0))
+      Dim nCrossId2 = EgtCreateLine(nLayerId, ptP + (-vtCrossY), ptP + vtCrossY)
+      EgtSetColor(nCrossId2, New Color3d(255, 0, 0))
+      Dim nPntId = EgtCreateGeoPoint(nLayerId, ptP)
+      EgtSetColor(nPntId, New Color3d(255, 0, 0))
+      Dim nCirleId = EgtCreateCircle(nLayerId, ptP, m_dDiameter / 2)
+      EgtSetColor(nCirleId, New Color3d(0, 255, 0))
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -77,7 +77,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub VacuumUpChanged(VacuumUpState As Boolean)
       Dim VacuumUpButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUMUP Then
             VacuumUpButton = MachineButton
          End If
@@ -89,7 +89,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub VacuumDownChanged(VacuumDownState As Boolean)
       Dim VacuumDownButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUMDOWN Then
             VacuumDownButton = MachineButton
          End If
@@ -101,7 +101,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum2UpChanged(Vacuum2UpState As Boolean)
       Dim Vacuum2UpButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM2UP Then
             Vacuum2UpButton = MachineButton
          End If
@@ -113,7 +113,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum2DownChanged(Vacuum2DownState As Boolean)
       Dim Vacuum2DownButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM2DOWN Then
             Vacuum2DownButton = MachineButton
          End If
@@ -125,7 +125,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum0Changed(Vacuum0State As Boolean)
       Dim Vacuum0Button As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM0 Then
             Vacuum0Button = MachineButton
          End If
@@ -137,7 +137,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum90Changed(Vacuum90State As Boolean)
       Dim VacuumRotButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM90 Then
             VacuumRotButton = MachineButton
          End If
@@ -149,7 +149,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum1Changed(Vacuum1State As Boolean)
       Dim Vacuum1StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM1STATE Then
             Vacuum1StateButton = MachineButton
          End If
@@ -161,7 +161,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum2Changed(Vacuum2State As Boolean)
       Dim Vacuum2StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM2STATE Then
             Vacuum2StateButton = MachineButton
          End If
@@ -173,7 +173,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum3Changed(Vacuum3State As Boolean)
       Dim Vacuum3StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM3STATE Then
             Vacuum3StateButton = MachineButton
          End If
@@ -185,7 +185,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum4Changed(Vacuum4State As Boolean)
       Dim Vacuum4StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM4STATE Then
             Vacuum4StateButton = MachineButton
          End If
@@ -197,7 +197,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum5Changed(Vacuum5State As Boolean)
       Dim Vacuum5StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM5STATE Then
             Vacuum5StateButton = MachineButton
          End If
@@ -209,7 +209,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum6Changed(Vacuum6State As Boolean)
       Dim Vacuum6StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM6STATE Then
             Vacuum6StateButton = MachineButton
          End If
@@ -221,7 +221,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum135Changed(Vacuum135State As Boolean)
       Dim Vacuum135StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM135STATE Then
             Vacuum135StateButton = MachineButton
          End If
@@ -233,7 +233,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Vacuum246Changed(Vacuum246State As Boolean)
       Dim Vacuum246StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUM246STATE Then
             Vacuum246StateButton = MachineButton
          End If
@@ -245,7 +245,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub OpenAllChanged(OpenAllState As Boolean)
       Dim OpenAllStateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_OPENALLSTATE Then
             OpenAllStateButton = MachineButton
          End If
@@ -257,7 +257,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub CloseAllChanged(CloseAllState As Boolean)
       Dim CloseAllStateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_CLOSEALLSTATE Then
             CloseAllStateButton = MachineButton
          End If
@@ -269,7 +269,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Open123Changed(Open123State As Boolean)
       Dim Open123StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_OPEN123STATE Then
             Open123StateButton = MachineButton
          End If
@@ -281,7 +281,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Open456Changed(Open456State As Boolean)
       Dim Open456StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_OPEN456STATE Then
             Open456StateButton = MachineButton
          End If
@@ -293,7 +293,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Close123Changed(Close123State As Boolean)
       Dim Close123StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_CLOSE123STATE Then
             Close123StateButton = MachineButton
          End If
@@ -305,7 +305,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub Close456Changed(Close456State As Boolean)
       Dim Close456StateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_CLOSE456STATE Then
             Close456StateButton = MachineButton
          End If
@@ -317,7 +317,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub BlowChanged(BlowState As Boolean)
       Dim BlowStateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_BLOWSTATE Then
             BlowStateButton = MachineButton
          End If
@@ -329,7 +329,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub VacuumOnChanged(VacuumState As Boolean)
       Dim VacuumOnButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUMON Then
             VacuumOnButton = MachineButton
          End If
@@ -341,7 +341,7 @@ Public Class VacuumMachineButtonUC
 
    Friend Sub VacuumOffChanged(VacuumState As Boolean)
       Dim VacuumOffButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_VACUUMOFF Then
             VacuumOffButton = MachineButton
          End If
@@ -354,7 +354,7 @@ Public Class VacuumMachineButtonUC
    Friend Sub BypassChanged(BypassState As Boolean)
       Dim PressedBypassStateButton As PressedCommandButton = Nothing
       Dim TwoBypassStateButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonList
+      For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_BYPASSTATE Then
             If TypeOf MachineButton Is TwoStateButton Then
                TwoBypassStateButton = MachineButton

DrawImport/AlzFrontUC.xaml

@@ -0,0 +1,271 @@
+<UserControl x:Class="AlzFrontUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   mc:Ignorable="d" 
+   d:DesignHeight="768" d:DesignWidth="256">
+    <!-- Definizione della Grid Laterale -->
+    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="0.3*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.2*"/>
+            <RowDefinition Height="4*"/>
+            <!--<RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>-->
+        </Grid.RowDefinitions>
+
+        <!--Titolo della colonna della ALZATINE-->
+        <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="Alz."
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+
+        <!--Titolo della colonna dei FRONTALINI-->
+        <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="Front."
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+
+        <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A1" Grid.Column="2" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-10,0,0,0"/>
+        <CheckBox Name="F1" Grid.Column="3" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-10,0,0,0"/>
+
+        <!--<EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A2" Grid.Column="2" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F2" Grid.Column="3" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A3" Grid.Column="2" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F3" Grid.Column="3" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A4" Grid.Column="2" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F4" Grid.Column="3" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A5" Grid.Column="2" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F5" Grid.Column="3" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A6" Grid.Column="2" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F6" Grid.Column="3" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A7" Grid.Column="2" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F7" Grid.Column="3" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A8" Grid.Column="2" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F8" Grid.Column="3" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A9" Grid.Column="2" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        <CheckBox Name="F9" Grid.Column="3" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+        
+        <!--<EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+        <CheckBox Name="A10" Grid.Column="2" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+
+        <CheckBox Name="F10" Grid.Column="3" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
+                  Margin="-20,0,0,0"/>
+
+        <!--<EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+                            Margin="0,0,0,-2"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+        <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
+                            Margin="0,0,0,-2"
+                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+        <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="0.3*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!-- Altezza delle alette --> 
+            <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                           Text="Offset"
+                           Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                           FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            
+            <EgtWPFLib:EgtTextBox Name="Parameter1ATxBx"                                  
+                                  Grid.Column="2" Grid.Row="0"
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter1FTxBx" 
+                                  Grid.Column="3" Grid.Row="0" 
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            
+            <!-- Delta angolo (abilitato solo per i frontalini) -->
+            <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                       Text="Offset2"
+                       Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <!-- temporaneamente disabilito la definizione delta angolo per alzatine  -->
+            <EgtWPFLib:EgtTextBox Name="Parameter2ATxBx" 
+                                  IsEnabled="False"
+                                  Visibility="Collapsed"
+                                  Grid.Column="2" Grid.Row="1"
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
+                                  Grid.Column="3" Grid.Row="1" 
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <!-- Spessore aletta -->
+            <TextBlock Name="Parameter5TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                       Text="Offset2"
+                       Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.Row="2" 
+                                  HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <!--Gestisco nello spazio di una TextBox due TextBoxs--><!--
+            <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
+                <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
+                                      Grid.Column="2" Grid.Row="12"
+                                      Width="40" Height="30"
+                                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
+                                      Grid.Column="3" Grid.Row="12" 
+                                      Width="40" Height="30"
+                                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            </UniformGrid>-->
+
+
+            <!--<TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+               Text="Affondamento"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+            <!--<TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                           Text="Accorciamento"
+                           Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                           FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+            
+            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="3">
+                <!--questo bottone è stato creato solo per garantire il corretto allinaemento-->
+                <Button Name="Vuoto" Visibility="Hidden"/>
+                <!--Bottone per tornare indietro alla selezione di CompoInterni e Alz&Front-->
+                <Button Name="BackBtn" 
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </UniformGrid>
+           
+        </Grid>
+
+
+
+    </Grid>
+
+</UserControl>
+

DrawImport/AlzFrontUC.xaml.vb

@@ -0,0 +1,888 @@
+Imports System.Globalization
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class AlzFrontUC
+   Private Const NUM_VAR As Integer = 10
+   Private Const LUA_CMP_VARS As String = "CMP"
+   Private Const LUA_CMP_DRAW As String = "CMP_Draw"
+   Private Const INFO_VAR As String = "Var"
+   Private Const INFO_CMP As String = "CMP"
+   Private Const INFO_ID As String = "ID"
+   Friend Const LUA_CMP_INDEX As String = LUA_CMP_VARS & ".Ind"
+   Friend Const LUA_CMP_INTERNAL As String = LUA_CMP_VARS & ".Int"
+   Friend Const LUA_REMOVEHOLE As String = "RemoveHole"
+
+   ' Costanti layer componenti
+   Friend Const COMPO_LAYER_AUX As String = "LayAux"
+   Friend Const COMPO_LAYER_QUOTATURE As String = "Quotature"
+   Friend Const COMPO_LAYER_ETICHETTE As String = "Etichette"
+
+   ' nome della info riferita alle alzatine e ai frontalini (1=Alz, 2=Front, 0=niente)
+   Private Const INFO_ALZFRONT As String = "AF"
+   Private Const INFO_ENABLE As String = "EnableAF"
+
+   ' Properties 
+   Private m_sCompoDir As String = String.Empty
+   Private m_sCompoName As String = String.Empty
+   Friend m_bDrawOk As Boolean = False
+   Private m_bFirst As Boolean = True
+
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   ' Riferimento alla pagina che ha aperto SideAngleUC
+   Private m_CallingPage As MainWindow.Pages
+
+   ' Gestione pagine
+   Private Const MAX_LINES As Integer = 10
+   ' lista dei lati, in cui indico il tipo di entità da associare
+   Private AlzFrontEntityList As New List(Of AlzFrontEntity)
+
+   ' numero di lati presenti nella figura
+   Private m_nCount As Integer = 0
+   ' numero di righe rese disponibili nella pagina -> m_nShow = min(m_nCount, MAX_LINE)
+   Private m_nShow As Integer = MAX_LINES
+
+   Private bInternalSelection As Boolean = False
+
+   ' raggio circoscritto al pezzo
+   Private m_dBBoxRad As Double
+   ' dimensione dei caratteri
+   Private m_dH As Double
+
+   Private Sub AlzFrontPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+
+      m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.AlzFront
+
+      ' numero di elemnti presenti nella lista SideAngle/DripEntity
+      m_nCount = 0
+      ' numero di righe rese disponibili nella pagina -> m_nShow = min(m_nCount, MAX_LINE)
+      m_nShow = 0
+
+      ' carico la lista dei lati della figura
+      InitSides()
+      ' aggiorno la visualizzazione delle TextBox e dei CheckBox
+      TxBlChBxView()
+      ' imposto lo stato delle checkbox
+      SetCheck()
+
+      ' nascondo il bottone Back della pagina Draw
+      m_MainWindow.m_DrawPageUC.BackBtn.Visibility = Visibility.Hidden
+      m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
+      ' Disabilito bottoni angoli di fianco e lavorazioni da sotto
+      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+
+      ' nome dei parametri condivisi
+      Parameter1TxBl.Text = "Altezza"
+      Parameter2TxBl.Text = "Delta angolo"
+      Parameter5TxBl.Text = "Spessore"
+
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   ' carico la lista dei lati della figura corrente
+   Private Sub InitSides()
+      ' pulisco la lista dei lati 
+      AlzFrontEntityList.Clear()
+
+      ' Id del pezzo
+      Dim PartId As Integer = GDB_ID.NULL
+      ' Id del loop eseterno
+      Dim LoopId As Integer = GDB_ID.NULL
+      ' Id delle label
+      Dim LabelId As Integer = GDB_ID.NULL
+
+      ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
+      Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+      ' Ricavo nome primo pezzo
+      PartId = EgtGetFirstPart()
+      ' se non  esiste un pezzo corrente allora esco
+      If PartId = GDB_ID.NULL Then Return
+
+      ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
+      LoopId = EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_OUTLOOP)
+
+      ' Recupero il layer "Etichette" per inserirvi il nome dei lati
+      LabelId = EgtGetFirstNameInGroup(EgtGetFirstPart(), COMPO_LAYER_ETICHETTE)
+      If LabelId = GDB_ID.NULL Then
+         LabelId = EgtCreateGroup(PartId)
+         EgtSetName(LabelId, COMPO_LAYER_ETICHETTE)
+      Else
+         ' se esistente allora lo svuoto
+         EgtEmptyGroup(LabelId)
+      End If
+      EgtSetStatus(LabelId, GDB_ST.ON_)
+
+      'Determino se loop esterno o interno
+      Dim sLoopName As String = ""
+      Dim bOutLoop As Boolean = (EgtGetName(LoopId, sLoopName) AndAlso sLoopName = NAME_OUTLOOP)
+      ' Calcolo dimensione ingombro Loop
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(LoopId, GDB_BB.STANDARD, ptMin, ptMax)
+      ' utilizzato per definire la dimensione dei caratteri delle label per i lati
+      m_dBBoxRad = 0.5 * Point3d.DistXY(ptMin, ptMax)
+
+      ' Recupero Id della curva del Loop Esterno
+      Dim PrevLine As Integer = EgtGetLastInGroup(LoopId)
+      Dim CurrLine As Integer = EgtGetFirstInGroup(LoopId)
+      ' Creo indice per numerare le entità in ImportPage
+      Dim nEntityIndex As Integer = 1
+      Dim nOtherIndex As Integer = 1
+
+      ' inserisco il lato nella lista 
+      While CurrLine <> GDB_ID.NULL
+         Dim NextId As Integer = EgtGetNext(CurrLine)
+         If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+         If VerifySideAnglePossible(PrevLine, CurrLine, NextId, bOutLoop) Then
+
+            If ApprovedSideToAlzFront(CurrLine) Then
+               ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
+               Dim sNameCurrLine As String = String.Empty
+               Dim nInfo As Integer = 0
+               Dim dSideAng As Integer = 0
+               EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
+               EgtGetName(CurrLine, sNameCurrLine)
+               ' inserisco la numerazione dei lati della figura
+               AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
+               ' recupero l'informazione 
+               EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
+               If nInfo = 1 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
+               ElseIf nInfo = 2 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
+               Else
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
+               End If
+               ' inserisco riferimento univoco al lato (solo se non esiste)
+               Dim sInfoRef As String = String.Empty
+               EgtGetInfo(CurrLine, "RefAF", sInfoRef)
+               If String.IsNullOrEmpty(sInfoRef) Then
+                  Dim sRefGUID As String = System.Guid.NewGuid().ToString()
+                  EgtSetInfo(CurrLine, "RefAF", sRefGUID)
+               End If
+               nEntityIndex += 1
+            Else
+               EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
+               nOtherIndex = nOtherIndex + 1
+            End If
+         End If
+         PrevLine = CurrLine
+         CurrLine = EgtGetNext(CurrLine)
+      End While
+
+      ' Aggiorno numero di lati carciati
+      m_nCount = AlzFrontEntityList.Count()
+      ' Aggiorno numero item visualizzati nella pagina iniziale
+      m_nShow = Math.Min(m_nCount, MAX_LINES)
+
+      ' Se non ci sono lati su cui operare, messaggio utente
+      If LoopId <> GDB_ID.NULL Then
+         If m_nCount = 0 Then
+            If m_CallingPage = MainWindow.Pages.Draw Then
+               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_DrawPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
+            Else
+               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_ImportPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
+            End If
+         Else
+            If m_CallingPage = MainWindow.Pages.Draw Then
+               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = ""
+               m_MainWindow.m_DrawPageUC.MessageBrd.Background = Brushes.Transparent
+            Else
+               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = ""
+               m_MainWindow.m_ImportPageUC.MessageBrd.Background = Brushes.Transparent
+            End If
+         End If
+      End If
+      ' aggiungo l'Info che comunica se il lato è stato modificato
+      InitList()
+
+   End Sub
+
+   ' Imposto la visibilità degli oggetti nella pagina: qui eseguo l'impaginazione
+   Private Sub TxBlChBxView()
+
+      If m_nCount = 0 Then
+         ' nascondo il nome delle colonne
+         SideAngleBl.Visibility = Windows.Visibility.Hidden
+         HeelBl.Visibility = Windows.Visibility.Hidden
+      Else
+         ' definisco il posizionamento del nome (Alz.) delle colonne all'interno della grigia
+         Grid.SetRow(SideAngleBl, MAX_LINES - m_nShow)
+         SideAngleBl.Text = "Alz."
+         SideAngleBl.Visibility = Windows.Visibility.Visible
+         ' definisco il posizionamento del nome (Front.) delle colonne all'interno della grigia
+         Grid.SetRow(HeelBl, MAX_LINES - m_nShow)
+         HeelBl.Text = "Front."
+         HeelBl.Visibility = Windows.Visibility.Visible
+      End If
+
+      ' Lati visibili
+      For nI As Integer = 1 To m_nShow
+         Dim Index As Integer = MAX_LINES - m_nShow + nI
+         ' definisco la visibilità della label
+         GetTxBlFromIndex(Index).Visibility = Windows.Visibility.Visible
+         GetTxBlFromIndex(Index).Text = "A" & nI.ToString
+         GetChBxAlzFromIndex(Index).Visibility = Windows.Visibility.Visible
+         GetChBxFrontFromIndex(Index).Visibility = Windows.Visibility.Visible
+         ' annulo le eventuali selezioni 
+         bInternalSelection = True
+         GetChBxAlzFromIndex(Index).IsChecked = False
+         bInternalSelection = True
+         GetChBxFrontFromIndex(Index).IsChecked = False
+
+         ' aggiungo i campi per allungare e accorciare i lati (adesso sostituito con le CheckBox)
+         'GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
+         'GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
+      Next
+
+      ' Lati nascosti: nascondo i lati partendo dall'alto (se ho 4 lati la prima TextBx disponibile è la settima -> 11-4 = 7 lati nascosti) 
+      For Index As Integer = 1 To MAX_LINES - m_nShow
+         ' definisco la visibilità della label
+         GetTxBlFromIndex(Index).Visibility = Windows.Visibility.Hidden
+         GetChBxAlzFromIndex(Index).Visibility = Windows.Visibility.Hidden
+         GetChBxFrontFromIndex(Index).Visibility = Windows.Visibility.Hidden
+         bInternalSelection = True
+         GetChBxAlzFromIndex(Index).IsChecked = False
+         bInternalSelection = True
+         GetChBxFrontFromIndex(Index).IsChecked = False
+         'GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Hidden
+         'GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Hidden
+
+      Next
+      bInternalSelection = False
+   End Sub
+
+   Private Sub SetCheck()
+      For IndexSide As Integer = 0 To AlzFrontEntityList.Count() - 1
+         Dim sNameSide As String = AlzFrontEntityList(IndexSide).SideName
+         Dim IndexCh As Integer = IndexSide + MAX_LINES - m_nShow + 1
+         If AlzFrontEntityList(IndexSide).Type = AlzFrontEntity.AlzFront.ALZATINA Then
+            bInternalSelection = True
+            GetChBxAlzFromIndex(IndexCh).IsChecked = True
+         ElseIf AlzFrontEntityList(IndexSide).Type = AlzFrontEntity.AlzFront.FRONTALINO Then
+            bInternalSelection = True
+            GetChBxFrontFromIndex(IndexCh).IsChecked = True
+         End If
+      Next
+      bInternalSelection = False
+   End Sub
+
+   ' restituisce vero se il lato possiede delle info legate al sideangle
+   Private Function VerifyIsThereSideAngle(nCurrLine As Integer) As Boolean
+      Dim dSideAngle As Double
+      return EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, dSideAngle)
+   End Function
+
+   ' restituisce vero se il lato possiede delle info legate alle alette
+   Private Function VerifyIsThereAlzFront(nCurrLine As Integer) As Boolean
+      Dim nAlzFront As Integer
+      return EgtGetInfo(nCurrLine, INFO_ALZFRONT, nAlzFront) AndAlso nAlzFront <> 0
+   End Function
+
+   ' approvo la costruzione dell'aletta sul lato indicato
+   Private Function ApprovedSideToAlzFront(nCurrLine As Integer) As Boolean
+      If VerifyIsThereSideAngle(nCurrLine) And Not VerifyIsThereAlzFront(nCurrLine) Then
+         ' se esiste SideAngle e un'aletta allora NON approvo
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' Permette di aggiugere accanto alla linea passata
+   Friend Function AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double,
+                                 dBBoxRad As Double, bTextExt As Boolean, Optional bRot As Boolean = False) As Integer
+      ' Calcolo altezza testo
+      m_dH = 0.05 * dBBoxRad
+      ' Creo testo
+      Dim nText As Integer = EgtCreateTextAdv(TextLayer, Point3d.ORIG(), 0, sText, "", 500, False, m_dH, 1, 0, INS_POS.MC)
+      ' Calcolo posizionamento
+      ' BBox del testo e suo centro
+      Dim ptMinBBox As Point3d
+      Dim ptMaxBBox As Point3d
+      EgtGetBBox(nText, GDB_BB.STANDARD, ptMinBBox, ptMaxBBox)
+      Dim ptMidBBox As Point3d
+      ptMidBBox = Point3d.Media(ptMinBBox, ptMaxBBox)
+      ' Punto medio della curva
+      Dim ptMid As Point3d
+      EgtMidPoint(CurrLine, nText, ptMid)
+      ' Versore sul punto medio della curva
+      Dim vtMid As Vector3d
+      EgtMidVector(CurrLine, nText, vtMid)
+      ' versore perpendicolare alla CurrLine che punta verso il testo
+      Dim vtOrto As New Vector3d(vtMid)
+      If bTextExt Then
+         vtOrto.Rotate(Vector3d.Z_AX(), -90)
+      Else
+         vtOrto.Rotate(Vector3d.Z_AX(), 90)
+      End If
+      ' eventuale rotazione del testo
+      Dim dRotAng As Double = 0
+      If bRot Then
+         dRotAng = Math.Atan2(vtMid.y, vtMid.x) * 180 / Math.PI
+         Dim dSpecRotAng = dRotAng
+         If dSpecRotAng > 91 Then
+            dSpecRotAng -= 180
+         ElseIf dSpecRotAng < -89 Then
+            dSpecRotAng += 180
+         End If
+         EgtRotate(nText, Point3d.ORIG(), Vector3d.Z_AX(), dSpecRotAng)
+      End If
+      ' vettore dal centro del BBox all'estremo più vicino
+      Dim vtptExtptMC As Vector3d
+      If bRot Then
+         vtptExtptMC = New Vector3d(0, ptMidBBox.y - ptMinBBox.y, 0)
+         vtptExtptMC.Rotate(Vector3d.Z_AX(), dRotAng)
+      Else
+         If bTextExt Then
+            If vtMid.x > 0 Then
+               If vtMid.y > 0 Then
+                  vtptExtptMC = ptMidBBox - New Point3d(ptMinBBox.x, ptMaxBBox.y, 0)
+               Else
+                  vtptExtptMC = ptMidBBox - ptMaxBBox
+               End If
+            Else
+               If vtMid.y > 0 Then
+                  vtptExtptMC = ptMidBBox - ptMinBBox
+               Else
+                  vtptExtptMC = ptMidBBox - New Point3d(ptMaxBBox.x, ptMinBBox.y, 0)
+               End If
+            End If
+         Else
+            If vtMid.x > 0 Then
+               If vtMid.y > 0 Then
+                  vtptExtptMC = ptMidBBox - New Point3d(ptMaxBBox.x, ptMinBBox.y, 0)
+               Else
+                  vtptExtptMC = ptMidBBox - ptMinBBox
+               End If
+            Else
+               If vtMid.y > 0 Then
+                  vtptExtptMC = ptMidBBox - ptMaxBBox
+               Else
+                  vtptExtptMC = ptMidBBox - New Point3d(ptMinBBox.x, ptMaxBBox.y, 0)
+               End If
+            End If
+         End If
+      End If
+      ' Calcolo il centro del testo
+      Dim ptTextMC As Point3d = ptMid + vtOrto * (dDistance + (vtOrto * vtptExtptMC))
+      EgtMove(nText, (ptTextMC - Point3d.ORIG()))
+      Return nText
+   End Function
+
+#Region "CHIAMATA ALLE TEXT/CHECK/LABEL"
+   Private Function GetChBxAlzFromIndex(Index As Integer) As CheckBox
+      Select Case Index
+         Case 1
+            Return A1
+         Case 2
+            Return A2
+         Case 3
+            Return A3
+         Case 4
+            Return A4
+         Case 5
+            Return A5
+         Case 6
+            Return A6
+         Case 7
+            Return A7
+         Case 8
+            Return A8
+         Case 9
+            Return A9
+         Case Else
+            Return A10
+      End Select
+   End Function
+
+   Private Function GetChBxAalZFromName(sName As String) As CheckBox
+      Select Case sName
+         Case "A1"
+            Return A1
+         Case "A2"
+            Return A2
+         Case "A3"
+            Return A3
+         Case "A4"
+            Return A4
+         Case "A5"
+            Return A5
+         Case "A6"
+            Return A6
+         Case "A7"
+            Return A7
+         Case "A8"
+            Return A8
+         Case "A9"
+            Return A9
+         Case Else
+            Return A10
+      End Select
+   End Function
+
+   Private Function GetChBxFrontFromIndex(Index As Integer) As CheckBox
+      Select Case Index
+         Case 1
+            Return F1
+         Case 2
+            Return F2
+         Case 3
+            Return F3
+         Case 4
+            Return F4
+         Case 5
+            Return F5
+         Case 6
+            Return F6
+         Case 7
+            Return F7
+         Case 8
+            Return F8
+         Case 9
+            Return F9
+         Case Else
+            Return F10
+      End Select
+   End Function
+
+   Private Function GetChBxFrontFromName(sName As String) As CheckBox
+      Select Case sName
+         Case "F1"
+            Return F1
+         Case "F2"
+            Return F2
+         Case "F3"
+            Return F3
+         Case "F4"
+            Return F4
+         Case "F5"
+            Return F5
+         Case "F6"
+            Return F6
+         Case "F7"
+            Return F7
+         Case "F8"
+            Return F8
+         Case "F9"
+            Return F9
+         Case Else
+            Return F10
+      End Select
+   End Function
+
+   'Private Function GetAngleTxBxFromIndex(Index As Integer) As EgtWPFLib.EgtTextBox
+   '   Select Case Index
+   '      Case 1
+   '         Return A1TxBx
+   '      Case 2
+   '         Return A2TxBx
+   '      Case 3
+   '         Return A3TxBx
+   '      Case 4
+   '         Return A4TxBx
+   '      Case 5
+   '         Return A5TxBx
+   '      Case 6
+   '         Return A6TxBx
+   '      Case 7
+   '         Return A7TxBx
+   '      Case 8
+   '         Return A8TxBx
+   '      Case 9
+   '         Return A9TxBx
+   '      Case Else
+   '         Return A10TxBx
+   '   End Select
+   'End Function
+
+   'Private Function GetHeelTxBxFromIndex(Index As Integer) As EgtWPFLib.EgtTextBox
+   '   Select Case Index
+   '      Case 1
+   '         Return H1TxBx
+   '      Case 2
+   '         Return H2TxBx
+   '      Case 3
+   '         Return H3TxBx
+   '      Case 4
+   '         Return H4TxBx
+   '      Case 5
+   '         Return H5TxBx
+   '      Case 6
+   '         Return H6TxBx
+   '      Case 7
+   '         Return H7TxBx
+   '      Case 8
+   '         Return H8TxBx
+   '      Case 9
+   '         Return H9TxBx
+   '      Case Else
+   '         Return H10TxBx
+   '   End Select
+   'End Function
+
+   Private Function GetTxBlFromIndex(Index As Integer) As TextBlock
+      Select Case Index
+         Case 1
+            Return Entity1
+         Case 2
+            Return Entity2
+         Case 3
+            Return Entity3
+         Case 4
+            Return Entity4
+         Case 5
+            Return Entity5
+         Case 6
+            Return Entity6
+         Case 7
+            Return Entity7
+         Case 8
+            Return Entity8
+         Case 9
+            Return Entity9
+         Case Else
+            Return Entity10
+      End Select
+   End Function
+
+#End Region    ' Chiamata elle Text/Check/Label
+
+#Region "SELEZIONE CHECKBOX"
+
+   ' Per gestire la selezione/deselezione delle Alzatine
+   Private Sub A_Checked(sender As Object, e As RoutedEventArgs) Handles A1.Checked, A2.Checked, A3.Checked, A4.Checked, A5.Checked, A6.Checked, A7.Checked, A8.Checked, A9.Checked, A10.Checked,
+                                                                         A1.Unchecked, A2.Unchecked, A3.Unchecked, A4.Unchecked, A5.Unchecked, A6.Unchecked, A7.Unchecked, A8.Unchecked, A9.Unchecked, A10.Unchecked
+      ' recupero il nome della Check selezionata
+      Dim bIsAlzatina As Boolean = True
+      Dim sChName As String = DirectCast(sender, CheckBox).Name
+      Dim bIsChecked As Boolean = DirectCast(sender, CheckBox).IsChecked
+      Dim sSideName As String = GetSideFromCheck(sChName, bIsAlzatina)
+      Dim sOppositeCheckBox As String = GetOppositeCheck(sChName, bIsAlzatina)
+      ' se la modifica della stato della checkbox avviene internamente al programma allora non devo eseguire nessun aggiornamento
+      If bInternalSelection Then
+         bInternalSelection = False
+         Return
+      End If
+      RefreshList(sSideName, sOppositeCheckBox, bIsAlzatina, bIsChecked)
+
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   ' Per gestire la selezione/deselezione dei Frontalini
+   Private Sub F_Checked(sender As Object, e As RoutedEventArgs) Handles F1.Checked, F2.Checked, F3.Checked, F4.Checked, F5.Checked, F6.Checked, F7.Checked, F8.Checked, F9.Checked, F10.Checked,
+                                                                         F1.Unchecked, F2.Unchecked, F3.Unchecked, F4.Unchecked, F5.Unchecked, F6.Unchecked, F7.Unchecked, F8.Unchecked, F9.Unchecked, F10.Unchecked
+      ' recupero il nome della Check selezionata
+      Dim bIsAlzatina As Boolean = False
+      Dim sChName As String = DirectCast(sender, CheckBox).Name
+      Dim bIsChecked As Boolean = DirectCast(sender, CheckBox).IsChecked
+      Dim sSideName As String = GetSideFromCheck(sChName, bIsAlzatina)
+      Dim sOppositeCheckBox As String = GetOppositeCheck(sChName, bIsAlzatina)
+      ' se la modifica della stato della checkbox avviene internamente al programma allora non devo eseguire nessun aggiornamento
+      If bInternalSelection Then
+         bInternalSelection = False
+         Return
+      End If
+      RefreshList(sSideName, sOppositeCheckBox, bIsAlzatina, bIsChecked)
+
+      EgtZoom(ZM.ALL)
+   End Sub
+
+#End Region    ' Selezione CheckBox
+
+#Region "ALTEZZA, DELTA ANGOLO DI SPOGLIA"
+
+   ' altezza ALZATINA
+   Private Sub ParameterA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1ATxBx.EgtClosed
+      ' Nuovo angolo di inclinazione
+      Dim dValue As Double
+      StringToDouble(Parameter1ATxBx.Text, dValue)
+      ' salvo il valore nel file ini e inserisco il valore nel file lua
+      WritePrivateProfileString("Alz&Front", "A_Height", Parameter1ATxBx.Text, m_MainWindow.GetIniFile())
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
+   ' altezza FRONTALINO
+   Private Sub Parameter1FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1FTxBx.EgtClosed
+      ' Nuovo angolo di inclinazione
+      Dim dValue As Double
+      StringToDouble(Parameter1FTxBx.Text, dValue)
+      ' salvo il valore nel file ini e inserisco il valore nel file lua
+      WritePrivateProfileString("Alz&Front", "F_Height", Parameter1FTxBx.Text, m_MainWindow.GetIniFile())
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
+   ' angolo di spoglia ALZATINA
+   Private Sub ParameterA2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2ATxBx.EgtClosed
+      ' Nuovo angolo di inclinazione
+      Dim dValue As Double
+      StringToDouble(Parameter2ATxBx.Text, dValue)
+      ' salvo il valore nel file ini e inserisco il valore nel file lua
+      WritePrivateProfileString("Alz&Front", "A_DeltaAng", Parameter2ATxBx.Text, m_MainWindow.GetIniFile())
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
+   ' angolo di spoglia FRONTALINO
+   Private Sub Parameter2FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2FTxBx.EgtClosed
+      ' Nuovo angolo di inclinazione
+      Dim dValue As Double
+      StringToDouble(Parameter2FTxBx.Text, dValue)
+      ' salvo il valore nel file ini e inserisco il valore nel file lua
+      WritePrivateProfileString("Alz&Front", "F_DeltaAng", Parameter2FTxBx.Text, m_MainWindow.GetIniFile())
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      Dim dValue As Double
+      StringToDouble(Parameter5TxBx.Text, dValue)
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
+#End Region    ' Altezza, delta angolo di spoglia
+
+#Region "METHODS"
+
+   ' noto il nome della checkbox (scritta nel codice xaml) selezionata restituisce il nome del lato (associato al disegno)
+   Private Function GetSideFromCheck(sNameCheck As String, bIsAlz As Boolean) As String
+      Dim sSideName As String = String.Empty
+      Dim sTypeCheck As String = "A"
+      If Not bIsAlz Then
+         sTypeCheck = "F"
+      End If
+      ' separo il nome in due
+      Dim sItems As String() = Split(sNameCheck, sTypeCheck)
+      Dim nIndex As Integer
+      ' costruisco il nome del lato
+      If sItems.Count > 1 Then
+         nIndex = CInt(sItems(1))
+         nIndex = nIndex - (MAX_LINES - m_nShow)
+         sSideName = "A" & nIndex.ToString
+      End If
+
+      Return sSideName
+   End Function
+
+   ' restituisce il nome del check opposto (Se passo una alzaztina restituisco il nome della checbox del frontalino)
+   Private Function GetOppositeCheck(sNameCheck As String, bIsAlz As Boolean) As String
+      Dim sSideName As String = String.Empty
+      Dim sTypeCheck As String = "A"
+      If Not bIsAlz Then
+         sTypeCheck = "F"
+      End If
+      ' separo il nome in due
+      Dim sItems As String() = Split(sNameCheck, sTypeCheck)
+
+      ' estraggo l'indice del lato selezionato e costruisco il nome del CheckBox opposto
+      If sItems.Count > 1 Then
+         If bIsAlz Then
+            sSideName = "F" & sItems(1).Trim
+         Else
+            sSideName = "A" & sItems(1).Trim
+         End If
+
+      End If
+
+      Return sSideName
+   End Function
+
+   Private Sub InitList()
+      ' quando avvio la pagina inizializzo tutti i lati comunicando che non sono stati modificati
+      For j As Integer = 0 To AlzFrontEntityList.Count() - 1
+         EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 0)
+      Next
+   End Sub
+
+   ' aggiorno lo stato della dell'oggetto
+   Private Sub RefreshList(sSideName As String, sOppositeNameCheck As String, bIsAlz As Boolean, bIsChecked As Boolean)
+      For j As Integer = 0 To AlzFrontEntityList.Count() - 1
+         If AlzFrontEntityList(j).SideName = sSideName Then
+            ' se deseleziono
+            If Not bIsChecked Then
+               AlzFrontEntityList(j).Type = AlzFrontEntity.AlzFront.NONE
+               ' insrisco l'informazione nelle info del lato
+               EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 0)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
+               Exit For
+            End If
+            ' se selezione di Alz. o Front.
+            If bIsAlz Then
+               AlzFrontEntityList(j).Type = AlzFrontEntity.AlzFront.ALZATINA
+               ' deseleziono il Check opposto
+               If GetChBxFrontFromName(sOppositeNameCheck).IsChecked Then
+                  bInternalSelection = True
+                  GetChBxFrontFromName(sOppositeNameCheck).IsChecked = False
+               End If
+               ' insrisco l'informazione nelle info del lato
+               EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 1)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
+            Else
+               AlzFrontEntityList(j).Type = AlzFrontEntity.AlzFront.FRONTALINO
+               ' deseleziono il Check opposto
+               If GetChBxAalZFromName(sOppositeNameCheck).IsChecked Then
+                  bInternalSelection = True
+                  GetChBxAalZFromName(sOppositeNameCheck).IsChecked = False
+               End If
+               ' inserisco l'informazione nelle info del lato
+               EgtSetInfo(AlzFrontEntityList(j).Id, INFO_ALZFRONT, 2)
+               EgtSetInfo(AlzFrontEntityList(j).Id, "IsModify", 1)
+            End If
+            ' termino il ciclo
+            Exit For
+         End If
+      Next
+      ' questa funzione deve essere lanciata al termine di ogno selezione o modifica dei parametri di dimensione
+      LoadCurrentCompo()
+   End Sub
+
+#End Region   ' Methods
+
+   ' eseguo il file per generare le Alzatine e i Frontalini (stesso file Lua)
+   Private Sub LoadCurrentCompo()
+      ' !! ATTENZIONE !! : per problemi di spazio è stata spenta la text per stampare i messaggi (ma potrebbe servire?)
+      ' Pulisco l'ambiente lua
+      EgtLuaResetGlobVar(LUA_CMP_VARS)
+      EgtLuaResetGlobVar(LUA_CMP_DRAW)
+
+      Dim nCompoName As Integer
+      Dim sCompoFile As String = ""
+      Dim sCompoImage As String = ""
+
+      ' recupero il nome del direttorio
+      Dim sCompoDir As String = String.Empty
+      GetPrivateProfileString(S_ALZFRONT, K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
+      ' leggo le info inserite nel campo "Alz&Front"
+      m_MainWindow.m_DrawPageUC.m_MainComponentPage.GetPrivateProfileCompo(S_ALZFRONT, K_ALZFRONT, nCompoName, sCompoFile, sCompoImage, m_MainWindow.GetIniFile())
+      'Dim sCompoImageSource As ImageSource
+
+      ' Costruisco path completa del componente
+      Dim sPath = sCompoDir & "\" & sCompoFile
+      ' Carico il file
+      EgtLuaExecFile(sPath)
+
+      ' carico la lista di variabili
+      Dim dVal As Double
+      If StringToLen(Parameter1ATxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.A_Height", dVal)
+      End If
+      If StringToLen(Parameter1FTxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.F_Height", dVal)
+      End If
+      If StringToLen(Parameter2ATxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.A_DeltaAng", dVal)
+      End If
+      If StringToLen(Parameter2FTxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.F_DeltaAng", dVal)
+      End If
+      If StringToLen(Parameter5TxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.ThicknessRaw", dVal)
+      End If
+      ' parametri per la scrittura dei caratteri
+      EgtLuaSetGlobNumVar("CMP.BBoxRad", m_dBBoxRad)
+      EgtLuaSetGlobNumVar("CMP.HeightText", m_dH)
+
+
+      Dim sMsg As String = String.Empty
+      ' eseguo la funzione per il disegno della componente (CMP_Draw)
+      If Not EgtLuaExecLine(LUA_CMP_DRAW & "(true)") Then
+         sMsg = "Error in component execution"
+         m_bDrawOk = False
+      Else
+         EgtLuaGetGlobStringVar(LUA_CMP_VARS & ".MSG", sMsg)
+         Dim nErr As Integer = 0
+         EgtLuaGetGlobIntVar(LUA_CMP_VARS & ".ERR", nErr)
+         m_bDrawOk = (nErr = 0)
+      End If
+      ' aggiorno la grafica
+      EgtZoom(ZM.ALL)
+   End Sub
+
+
+   ' metodo utilizzato per tornare indietro alla pagina di selezione "CompoInterni/Alz&Front"
+   Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
+      m_MainWindow.m_DrawPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
+
+      ' torno alla pagina iniziale di selezione del piano (Compo)
+      'm_MainWindow.m_DrawPageUC.BackBtn_Click(sender, e)
+
+      '--------- NUOVA GESTIONE ---------
+      ' rimuovo l'elenco di bottoni per selezionare il tipo di componente interna
+      m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
+      ' inserisco nella Grid VaribalsesGrid lo UeserControl per definire le dimensioni della componente
+      m_MainWindow.m_DrawPageUC.VariablesGrd.Children.Add(m_MainWindow.m_DrawPageUC.m_CompoDimension)
+      ' nascondo la lista dei parametri
+      m_MainWindow.m_DrawPageUC.m_CompoDimension.CollapsedAllParam()
+      ' sto uscendo dalla componente interna (quindi comunico il cambio di componente)
+      m_MainWindow.m_DrawPageUC.m_bInternalCompo = False
+      ' comunico che sto arrivando da una componente interna
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = True
+
+      'm_MainWindow.m_DrawPageUC.SelectedComponent(m_MainWindow.m_DrawPageUC.m_sMainCompo)
+      'm_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.CompoDimension
+   End Sub
+
+
+
+End Class
+
+Public Class AlzFrontEntity
+   Public Enum AlzFront
+      ALZATINA
+      FRONTALINO
+      NONE
+   End Enum
+
+   Private m_SideName As String
+   Private m_Id As Integer
+   Private m_Type As AlzFront = AlzFront.NONE
+
+   ' nome del lato scritto nel file nge (il nome deve avere la forma: A1, A2, .., An)
+   Public Property SideName As String
+      Get
+         Return m_SideName
+      End Get
+      Set(value As String)
+         m_SideName = value
+      End Set
+   End Property
+
+   Public Property Type As AlzFront
+      Get
+         Return m_Type
+      End Get
+      Set(value As AlzFront)
+         m_Type = value
+      End Set
+   End Property
+
+   Public Property Id As Integer
+      Get
+         Return m_Id
+      End Get
+      Set(value As Integer)
+         m_Id = value
+      End Set
+   End Property
+
+   Sub New(Name As String, CurrId As Integer, Optional CurrType As AlzFront = AlzFront.NONE)
+      m_SideName = Name
+      m_Id = CurrId
+      m_Type = CurrType
+   End Sub
+
+End Class

DrawImport/CompoDimensionUC.xaml

@@ -26,7 +26,7 @@
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+        </Grid.RowDefinitions>
 
       <TextBlock Name="Label1" Grid.Row="0"
                Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
@@ -69,12 +69,18 @@
       <EgtWPFLib:EgtTextBox Name="TextBox10" Grid.Column="1" Grid.Row="9" Width="90"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <Button Name="InternComponentBtn" Grid.Row="11" Grid.ColumnSpan="2"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+       <!--Per confermare l'inserimento CompoInterno-->
+      <Button Name="AddBtn" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+      <Button Name="CancelBtn" Grid.Column="1" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-        <Button Name="AddBtn" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-        <Button Name="CancelBtn" Grid.Column="1" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+       <!--Selezione delle componenti interne-->
+      <Button Name="InternComponentBtn" Grid.Row="10" Grid.ColumnSpan="2"
+              Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-   </Grid>
+      <!--Selezione di Alz&Front-->
+      <Button Name="AlzFrontBtn" Grid.Row="11" Grid.ColumnSpan="2"
+              Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+    </Grid>
 
 </UserControl>

DrawImport/CompoDimensionUC.xaml.vb

@@ -13,15 +13,35 @@ Public Class CompoDimensionUC
 
    ' Riferimento alla pagina di selezione dei componenti interni
    Friend m_InternalCompoPage As InternalComponentPageUC
+   ' Riferimento alla pagina di selezione della alzatine
+   Friend m_AlzFrontPage As AlzFrontUC
+   ' solo se è configurato il direttorio della componente allora mostro il bottone
+   Friend bEnableAlzFront As Boolean = False
 
    Private Sub CompoDimensionUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      'Creazione delle Page UserControl
+      'Creazione delle Page UserControl (per le componenti interne)
       m_InternalCompoPage = New InternalComponentPageUC
-      'Posizionemento nella griglia delle Page UserControl
+      'Posizionemento nella griglia delle Page UserControl 
       m_InternalCompoPage.SetValue(Grid.ColumnSpanProperty, 2)
       m_InternalCompoPage.SetValue(Grid.RowSpanProperty, 4)
 
+      'Creazione della Page UserControl (per le alzatine e i frontalini)
+      m_AlzFrontPage = New AlzFrontUC
+      'Posizionamento nella griglia della Page UserControl
+      m_AlzFrontPage.SetValue(Grid.ColumnSpanProperty, 2)
+      m_AlzFrontPage.SetValue(Grid.RowSpanProperty, 4)
+
+      Dim sCompoDir As String = String.Empty
+      GetPrivateProfileString(S_ALZFRONT, K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
+      ' definisco il nome dei comandi presenti nella pagine
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
+      If Not String.IsNullOrEmpty(sCompoDir) Then
+         bEnableAlzFront = True
+         AlzFrontBtn.Content = "Alzatine & Frontalini"
+      Else
+         AlzFrontBtn.Visibility = Visibility.Collapsed
+      End If
+
       AddBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 48)                 ' Aggiungi
       CancelBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 49)              ' Rimuovi
    End Sub
@@ -33,6 +53,19 @@ Public Class CompoDimensionUC
       ' Imposto questa come pagina correntemente visualizzata nella drawpage
       m_DrawPage.m_ActiveComponentPage = DrawPageUC.Pages.CompoDimension
 
+      ' se arrivo dalla pagina delle componenti interne allora esco (non devo ricalcolare i parametri)
+      If m_DrawPage.m_bBackFromInternalCompo Then
+         ShowInternalBtn(True)
+         ShowAlzFrontBtn(bEnableAlzFront)
+         ' Se componente interno visualizzo bottoni aggiungi rimuovi
+         ShowAddRemoveBtn(m_DrawPage.m_bInternalCompo)
+         ' Imposto contesto corrente e faccio uno ZoomAll della scena con il componente
+         EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+         EgtZoom(ZM.ALL)
+         ' termino il caricamento della pagina
+         Return
+      End If
+
       ' Se componente interno disabilito il bottone di ok della drawpage
       If m_DrawPage.m_bInternalCompo Then
          m_DrawPage.OkBtn.IsEnabled = False
@@ -41,8 +74,10 @@ Public Class CompoDimensionUC
       If m_DrawPage.sCompoName.StartsWith("PCucina") Or
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
+         ShowAlzFrontBtn(bEnableAlzFront)
       Else
          ShowInternalBtn(False)
+         ShowAlzFrontBtn(False)
       End If
 
       ' Se componente interno visualizzo bottoni aggiungi rimuovi
@@ -58,6 +93,7 @@ Public Class CompoDimensionUC
       m_DrawPage.OkBtn.IsEnabled = True
    End Sub
 
+   ' rende visibile il bottone per inserire le componenti interne: solo nella pagine delle componenti
    Friend Sub ShowInternalBtn(value As Boolean)
       If value Then
          InternComponentBtn.Visibility = Windows.Visibility.Visible
@@ -66,6 +102,16 @@ Public Class CompoDimensionUC
       End If
    End Sub
 
+   ' rende visibile il bottone per inserire le azatine e i frontalini: solo nella pagina delle componenti
+   Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
+      If value Then
+         AlzFrontBtn.Visibility = Visibility.Visible
+      Else
+         AlzFrontBtn.Visibility = Visibility.Hidden
+      End If
+   End Sub
+
+   ' definisce se rendere visbile oppure no i bottone "Aggiungi" e "Rimuovi": presenti solo nella componenti interne
    Friend Sub ShowAddRemoveBtn(value As Boolean)
       If value Then
          m_DrawPage.SideAngleBtn.IsEnabled = False
@@ -233,7 +279,18 @@ Public Class CompoDimensionUC
       m_DrawPage.UpdateView()
    End Sub
 
+   Public Sub CollapsedAllParam()
+      For i As Integer = 1 To NUM_VAR
+         GetNameEdit(i).Visibility = Visibility.Collapsed
+         GetValueEdit(i).Visibility = Visibility.Collapsed
+      Next
+   End Sub
+
+#Region "METHODS for InternalCompo"
+
+   ' visualizzo la pagina per la selezione delle componenti interne
    Private Sub InternComponentBtn_Click(sender As Object, e As RoutedEventArgs) Handles InternComponentBtn.Click
+      m_DrawPage.m_bBackFromInternalCompo = False
       ' imposto contesto
       EgtSetCurrentContext(m_DrawPage.DrawScene.GetCtx())
       ' Nascondo layer etichette e quotature
@@ -248,6 +305,25 @@ Public Class CompoDimensionUC
       m_DrawPage.LeftButtonGrd.Children.Add(m_InternalCompoPage)
    End Sub
 
+   ' visualizzo la pagina per la selezione delle componenti interne
+   Private Sub AlzFrontBtn_Click(sender As Object, e As RoutedEventArgs) Handles AlzFrontBtn.Click
+      m_DrawPage.m_bBackFromInternalCompo = False
+      ' imposto contesto
+      EgtSetCurrentContext(m_DrawPage.DrawScene.GetCtx())
+      ' Nascondo layer etichette e quotature
+      Dim Pz As Integer = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
+      EgtSetStatus(EgtGetFirstNameInGroup(Pz, "LayAux"), GDB_ST.OFF)
+      EgtSetStatus(EgtGetFirstNameInGroup(Pz, "Etichette"), GDB_ST.OFF)
+      EgtSetStatus(EgtGetFirstNameInGroup(Pz, "Quotature"), GDB_ST.OFF)
+      EgtDraw()
+
+      m_DrawPage.VariablesGrd.Children.Remove(Me)
+      m_DrawPage.m_bInternalCompo = True
+      m_DrawPage.LeftButtonGrd.Children.Add(m_AlzFrontPage)
+   End Sub
+
+
+   ' Bottone utilizzato per inserire le componenti interne
    Private Sub AddBtn_Click(sender As Object, e As RoutedEventArgs) Handles AddBtn.Click
       ' Se componente errato, non faccio alcunché
       If Not m_DrawPage.m_bDrawOk Then Return
@@ -266,15 +342,10 @@ Public Class CompoDimensionUC
          End While
       End If
       ' Esco dalla pagina
-      m_DrawPage.VariablesGrd.Children.Remove(Me)
-      m_DrawPage.LeftButtonGrd.Children.Add(m_InternalCompoPage)
-      ' Reset componente
-      m_MainWindow.m_DrawPageUC.ResetCompoName()
-      ' Deseleziono oggetto corrente e aggiorno visualizzazione
-      EgtDeselectAll()
-      EgtDraw()
+      ExitInternalVariable()
    End Sub
 
+   ' annulla l'inserimento della componente corrente
    Private Sub CancelBtn_Click(sender As Object, e As RoutedEventArgs) Handles CancelBtn.Click
       ' Cancello layer con contorno errato
       Dim nId As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "ErrorLay")
@@ -292,7 +363,13 @@ Public Class CompoDimensionUC
       Else
          m_DrawPage.m_bDrawOk = True
       End If
-      ' Sistemo interfaccia
+      ' Esco dalla pagina
+      ExitInternalVariable()
+   End Sub
+
+   ' Esco dalla pagine delle variabili della componente interna: reimposto la pagina della componenti interne
+   Private Sub ExitInternalVariable()
+      ' Esco dalla pagina
       m_DrawPage.VariablesGrd.Children.Remove(Me)
       m_DrawPage.LeftButtonGrd.Children.Add(m_InternalCompoPage)
       ' Reset componente
@@ -302,4 +379,5 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+#End Region    ' METHODS for InternalCompo
 End Class

DrawImport/DrawPageUC.xaml.vb

@@ -30,8 +30,9 @@ Public Class DrawPageUC
    Friend m_SideAngleUC As SideAngleUC
    Friend m_FiloTopUC As FiloTopUC
 
-   ' Variabile che indica se componenti interni o esterni
+   ' Variabile che indica se componenti interni o esterni (usato anche per definire le alzatine e i fronatlini)
    Friend m_bInternalCompo As Boolean = False
+   Friend m_bBackFromInternalCompo As Boolean = False
 
    ' Properties 
    Private m_sCompoDir As String = String.Empty
@@ -40,6 +41,10 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
+   Friend m_sMainCompo As String = String.Empty
+
+
    ' Trf Data
    Private m_bTrfData As Boolean = False
    Private m_TrfOrderCode As String = ""
@@ -100,6 +105,9 @@ Public Class DrawPageUC
          Return m_nSelectedLayer
       End Get
    End Property
+   Public Sub SetCurrLayer(ByVal nCurrLayer As Integer)
+      m_nSelectedLayer = nCurrLayer
+   End Sub
 
    Enum Pages
       MainComponent
@@ -109,6 +117,7 @@ Public Class DrawPageUC
       CompoDimension
       SideAngle
       FiloTop
+      AlzFront
    End Enum
 
    Private Sub DrawPage_Initialized(sender As Object, e As EventArgs)
@@ -179,6 +188,7 @@ Public Class DrawPageUC
 
    End Sub
 
+   ' carico le impostazioni grafiche della scena (solo al primo avvio)
    Private Sub DrawPage_Loaded(sender As Object, e As RoutedEventArgs)
 
       If m_bFirst Then
@@ -205,6 +215,14 @@ Public Class DrawPageUC
          Dim DstLnColor As New Color3d(255, 0, 0)
          GetPrivateProfileColor(S_SCENE, K_DISTLINE, DstLnColor, m_MainWindow.GetIniFile())
          DrawScene.SetDistLineMaterial(DstLnColor)
+
+         '' imposto il colore di sfondo del disegno
+         'Dim BAckTopColor As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackTop", BAckTopColor, m_MainWindow.GetIniFile())
+         'Dim BackBottom As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackBottom", BackBottom, m_MainWindow.GetIniFile())
+         'DrawScene.SetViewBackground(BAckTopColor, BackBottom)
+
          ' imposto parametri OpenGL
          Dim nDriver As Integer = GetPrivateProfileInt(S_OPENGL, K_DRIVER, 3, m_MainWindow.GetIniFile())
          Dim b2Buff As Boolean = (GetPrivateProfileInt(S_OPENGL, K_DOUBLEBUFFER, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -264,16 +282,20 @@ Public Class DrawPageUC
       m_sCsvName = ""
    End Sub
 
+   ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles DrawScene.OnMouseDownScene
       ' Si può selezionare solo con il tasto sinistro e se stato NULL
       If e.Button <> Windows.Forms.MouseButtons.Left Or Not DrawScene.IsStatusNull() Then Return
       ' Si può selezionare solo se non si sta già editando un componente
       If m_ActiveComponentPage = Pages.InternalComponent Then
-         OnMouseDownSceneInternalComponent( e)
+         OnMouseDownSceneInternalComponent(e)
       ElseIf m_ActiveComponentPage = Pages.SideAngle Then
-         OnMouseDownSceneSideAngle( e)
+         OnMouseDownSceneSideAngle(e)
       ElseIf m_ActiveComponentPage = Pages.FiloTop Then
-         OnMouseDownSceneFiloTop( e)
+         OnMouseDownSceneFiloTop(e)
+      ElseIf m_ActiveComponentPage = Pages.AlzFront Then
+         ' da definire
+
       End If
    End Sub
 
@@ -497,6 +519,7 @@ Public Class DrawPageUC
       If sCompo = m_sCompoName Then
          Return
       End If
+
       m_sCompoName = sCompo
       ' Pulisco l'ambiente lua
       ResetLuaVariables()
@@ -857,7 +880,222 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   ' permette di inserire più di un part
+   Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
+      
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto il contesto corrente
+      EgtSetCurrentContext(DrawScene.GetCtx())
+      Dim Pz As Integer = -1
+      Dim NxtPz As Integer = -1
+
+      ' Cancello layer regioni per selezione buchi
+      Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
+
+      While Pz <> -1
+         ' imposto il contesto corrente
+         EgtSetCurrentContext(DrawScene.GetCtx())
+         ' cerco un altro pezzo nell'elenco
+         NxtPz = EgtGetNextPart(Pz)
+
+         Dim SelectRegion As Integer = EgtGetFirstNameInGroup(Pz, "SelectRegion")
+         EgtErase(SelectRegion)
+         ' Cancello layer etichette, quotatura,ausiliario e box
+         EgtErase(EgtGetFirstNameInGroup(Pz, "LayAux"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Etichette"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Quotature"))
+         EgtErase(EgtGetFirstNameInGroup(Pz, "Box"))
+
+         ' Cancello layer etichette dei componenti interni (buchi)
+         Dim nHLId As Integer = EgtGetFirstNameInGroup(Pz, "HoleLabels")
+         While nHLId <> GDB_ID.NULL
+            EgtErase(nHLId)
+            nHLId = EgtGetFirstNameInGroup(Pz, "HoleLabels")
+         End While
+
+         ' Attivo visualizzazione misura
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(Pz, NAME_REGION)
+         Dim nId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While nId <> GDB_ID.NULL
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               EgtSetStatus(nId, GDB_ST.ON_)
+            End If
+            nId = EgtGetNext(nId)
+         End While
+
+         ' Calcolo dimensione ingombro Pezzo tramite OutLoop
+         Dim nOutLoopLayer = EgtGetFirstNameInGroup(Pz, NAME_OUTLOOP)
+         Dim b3Part As New BBox3d
+         EgtGetBBoxGlob(nOutLoopLayer, GDB_BB.STANDARD, b3Part)
+         ' Muovo la regione in Z per evitare problemi in visualizzazione
+         EgtMove(nRegLayId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
+
+         ' Se pezzo con dati TRF
+         If m_bTrfData Then
+            ' Nome da dati Trf
+            Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+            While nTextId <> GDB_ID.NULL
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                  Dim sText As String = m_TrfOrderCode & "-" & m_TrfOrderDesc
+                  Dim sText2 As String = m_TrfMatCode & "-" & m_TrfSurfCode
+                  Dim sText3 As String = LenToString(b3Part.DimX(), 0) & " x " & LenToString(b3Part.DimY(), 0) & " x " & LenToString(m_TrfThickness, 0)
+                  Dim dRatio As Double = Math.Max(b3Part.DimX(), b3Part.DimY()) / Math.Min(b3Part.DimX(), b3Part.DimY())
+                  If dRatio < 5 Then
+                     sText = sText & "<br/>" & sText2 & "<br/>" & sText3
+                  Else
+                     sText = sText & "  " & sText2 & "  " & sText3
+                  End If
+                  EgtModifyText(nTextId, sText)
+                  Dim ptCen As Point3d
+                  EgtCenterPoint(nTextId, ptCen)
+                  Dim b3Text As New BBox3d
+                  EgtGetBBoxGlob(nTextId, GDB_BB.STANDARD, b3Text)
+                  Dim dCoeff As Double = Math.Min(b3Part.DimX() / b3Text.DimX(), b3Part.DimY() / b3Text.DimY()) / 1.25
+                  If dCoeff < 1 Then EgtScale(nTextId, New Frame3d(ptCen), dCoeff, dCoeff, dCoeff)
+                  Exit While
+               End If
+               nTextId = EgtGetNext(nTextId)
+            End While
+            ' Info di pezzo da dati Trf
+            EgtSetInfo(Pz, "OC", m_TrfOrderCode)
+            EgtSetInfo(Pz, "OD", m_TrfOrderDesc)
+            EgtSetInfo(Pz, "PC", m_TrfPartCode)
+            EgtSetInfo(Pz, "MT", m_TrfMatCode)
+            EgtSetInfo(Pz, "SRF", m_TrfSurfCode)
+            EgtSetInfo(Pz, "L", DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, "W", DoubleToString(b3Part.DimY(), 1))
+            EgtSetInfo(Pz, "T", m_TrfThickness)
+            EgtSetInfo(Pz, "V1", DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, "V2", DoubleToString(b3Part.DimY(), 1))
+            ' Se altrimenti pezzo con dati Csv
+         ElseIf m_bCsvData Then
+            ' Nome del pezzo
+            EgtSetName(Pz, m_sCsvName)
+            ' Dati Csv
+            EgtSetInfo(Pz, INFO_CSV_PART, m_sCsvName)
+            EgtSetInfo(Pz, INFO_CSV_ORD, m_sCsvOrder)
+            EgtSetInfo(Pz, INFO_CSV_DIST, m_sCsvList)
+            EgtSetInfo(Pz, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
+            EgtSetInfo(Pz, INFO_CSV_V1, DoubleToString(b3Part.DimX(), 1))
+            EgtSetInfo(Pz, INFO_CSV_V2, DoubleToString(b3Part.DimY(), 1))
+            ' Se definito nome lo inserisco nel testo
+            If Not String.IsNullOrWhiteSpace(m_sCsvName) Then
+               Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+               While nTextId <> GDB_ID.NULL
+                  If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                     Dim sText As String = String.Empty
+                     EgtTextGetContent(nTextId, sText)
+                     Dim sNewText = m_sCsvName & "<br/>" & sText
+                     EgtModifyText(nTextId, sNewText)
+                     Exit While
+                  End If
+                  nTextId = EgtGetNext(nTextId)
+               End While
+            End If
+            ' Altrimenti pezzo con dati normali
+         Else
+            ' Se definito nome lo inserisco nel testo
+            If Not String.IsNullOrWhiteSpace(sName) Then
+               Dim nTextId = EgtGetFirstInGroup(nRegLayId)
+               While nTextId <> GDB_ID.NULL
+                  If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
+                     Dim sText As String = String.Empty
+                     EgtTextGetContent(nTextId, sText)
+                     Dim sNewText = sName & "<br/>" & sText
+                     EgtModifyText(nTextId, sNewText)
+                     Exit While
+                  End If
+                  nTextId = EgtGetNext(nTextId)
+               End While
+            End If
+         End If
+         ' Eventuale testo per indicare il sopra (solo nel caso di rettangolo)
+         If TopChBx.IsVisible() And TopChBx.IsChecked() Then
+            Utility.AddTopToPartRegion(nRegLayId)
+         End If
+         ' Scrivo testi per nesting
+         SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
+         ' Imposto colore testi
+         Utility.SetTextColor(nRegLayId)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, InsertColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
+         ' Esporto il pezzo in un file temporaneo
+         Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPartCompo.Nge"
+         If Not EgtSaveObjToFile(Pz, sTmpFile, NGE.BIN) Then
+            Return False
+         End If
+
+         ' Passo al contesto principale
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
+         Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
+         ' Elimino eventuali precedenti pezzi vuoti
+         EgtEraseEmptyParts()
+         ' Area dei nuovi pezzi
+         Dim dNewArea As Double = 0
+         ' Se esiste il file del pezzo
+         If My.Computer.FileSystem.FileExists(sTmpFile) Then
+            ' eseguo inserimento
+            For i As Integer = 1 To nNbr
+               ' Inserisco il pezzo
+               EgtInsertFile(sTmpFile)
+               ' Ne recupero l'Id
+               Dim nId2 As Integer = EgtGetLastPart()
+               ' Aggiusto per lavorazioni
+               EgtAdjustFlatPart(nId2)
+               ' Se dati Trf assegno nome univoco
+               If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
+               ' Aggiorno l'area dei nuovi pezzi
+               dNewArea += GeomCalc.GetPartArea(nId2)
+               ' Inserisco in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
+
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+               ' verifico che il pezzo sia un Piano Cucina o un Piano Bagno o un'Aletta
+               Dim sCMP As String = String.Empty
+               EgtGetInfo(nId2, "CMP", sCMP)
+               If sCMP.StartsWith("PCucina") Or sCMP.StartsWith("PBagno") Or sCMP.StartsWith("AlzFront") Then
+                  ' Aggiungo riferimento e lo inserisco in VeinMatching
+                  VeinMatching.SetRefOnPart(nId2)
+                  VeinMatching.AddPartFromDraw(nId2)
+                  ' Se richiesto posizionamento diretto, lo eseguo
+                  If bDirect Then
+                     If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
+                        ' Eventuale notifica al VeinMatching
+                        VeinMatching.OnInsertPartInRaw(nId2)
+                     End If
+                  End If
+               End If
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+
+            Next
+            ' Cancello il file
+            My.Computer.FileSystem.DeleteFile(sTmpFile)
+         End If
+         ' Aggiorno Aree totale
+         m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
+         ' passo al pezzo successivo
+         Pz = NxtPz
+      End While
+      ' Aggiorno Aree da lavorare dei pezzi
+      m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
+      m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+      ' Aggiorno ambiente principale
+      EgtZoom(ZM.ALL)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      m_bBackFromInternalCompo = False
+      m_bInternalCompo = False
+
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' se sto definendo un componente interno non posso uscire
       If m_ActiveComponentPage = Pages.CompoDimension And m_bInternalCompo Then Return
@@ -868,7 +1106,8 @@ Public Class DrawPageUC
       ' Leggo numero di pezzi da inserire
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
-      MakeInsert(InsNbr, sPartName)
+      'MakeInsert(InsNbr, sPartName)
+      MakeMultipleInsert(InsNbr, sPartName)
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -876,7 +1115,9 @@ Public Class DrawPageUC
       ' Reset inclinazioni
       m_SideAngleUC.DeleteSideAngle()
       ' Chiudo compo interni nel caso siano aperti
+      LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
       LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
@@ -884,7 +1125,11 @@ Public Class DrawPageUC
 
    End Sub
 
+   ' esco dalla pagina corrente
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_bBackFromInternalCompo = False
+      m_bInternalCompo = False
+
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Elimino nome del componente precedente
       m_sCompoName = String.Empty
@@ -893,6 +1138,7 @@ Public Class DrawPageUC
       ' Chiudo compo secondari e interni nel caso siano aperti
       LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
       LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
@@ -926,6 +1172,9 @@ Public Class DrawPageUC
          ElseIf m_ActiveComponentPage = Pages.InternalComponent Then
             m_PrevSideAnglePage = Pages.InternalComponent
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         ElseIf m_ActiveComponentPage = Pages.AlzFront Then
+            m_PrevSideAnglePage = Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
          VariablesGrd.Children.Add(m_SideAngleUC)
          FiloTopBtn.IsEnabled = False
@@ -987,6 +1236,9 @@ Public Class DrawPageUC
          ElseIf m_ActiveComponentPage = Pages.InternalComponent Then
             m_PrevSideAnglePage = Pages.InternalComponent
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         ElseIf m_ActiveComponentPage = Pages.AlzFront Then
+            m_PrevSideAnglePage = Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
          VariablesGrd.Children.Add(m_SideAngleUC)
          FiloTopBtn.IsEnabled = False
@@ -1045,6 +1297,9 @@ Public Class DrawPageUC
          ElseIf m_ActiveComponentPage = Pages.InternalComponent Then
             m_PrevSideAnglePage = Pages.InternalComponent
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         ElseIf m_ActiveComponentPage = Pages.AlzFront Then
+            m_PrevSideAnglePage = Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
          VariablesGrd.Children.Add(m_SideAngleUC)
          SideAngleBtn.IsEnabled = False
@@ -1098,10 +1353,13 @@ Public Class DrawPageUC
          ' Imposto modalità
          If m_ActiveComponentPage = Pages.CompoDimension Then
             m_PrevSideAnglePage = Pages.CompoDimension
-            VariablesGrd.Children.Remove( m_CompoDimension)
+            VariablesGrd.Children.Remove(m_CompoDimension)
          ElseIf m_ActiveComponentPage = Pages.InternalComponent Then
             m_PrevSideAnglePage = Pages.InternalComponent
-            LeftButtonGrd.Children.Remove( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         ElseIf m_ActiveComponentPage = Pages.AlzFront Then
+            m_PrevSideAnglePage = Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
          VariablesGrd.Children.Add( m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
@@ -1159,7 +1417,7 @@ Public Class DrawPageUC
          Case Pages.SideAngle
             VariablesGrd.Children.Remove( m_SideAngleUC)
          Case Pages.FiloTop
-            VariablesGrd.Children.Remove( m_FiloTopUC)
+            VariablesGrd.Children.Remove(m_FiloTopUC)
       End Select
 
       ' Pulisco l'ambiente lua

DrawImport/Engrave.vb

@@ -79,7 +79,7 @@ Module Engrave
       End Function
 
       Friend Function GetEngraveAff(cCol As Color3d, ByRef dAff As Double, ByRef dLar As Double) As Boolean
-         For Each Ctsa In m_ListCte
+         For Each Ctsa As CTE In m_ListCte
             If Ctsa.m_bOk And
                Math.Abs(cCol.R - Ctsa.m_R) < m_nTol And
                Math.Abs(cCol.G - Ctsa.m_G) < m_nTol And

DrawImport/ImportPageUC.xaml.vb

@@ -576,6 +576,36 @@ Public Class ImportPageUC
       End If
    End Sub
 
+   ' metodo utilizzato per definire il colore dei pezzi DXF importati
+   Private Sub ColorRegion(nCtx As Integer)
+
+      ' Leggo dati corrispondenza colore
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(nCtx)
+      ' Ciclo sui pezzi
+      Dim PartId As Integer = EgtGetFirstPart()
+      While PartId <> GDB_ID.NULL
+         ' Ciclo sui layer delle regioni
+         Dim RegionId As Integer = EgtGetFirstNameInGroup(PartId, NAME_REGION)
+         While RegionId <> GDB_ID.NULL
+            EgtSetColor(RegionId, InsertColor)
+            ' Ciclo sulle regioni
+            Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
+            While EntId <> GDB_ID.NULL
+               If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               EntId = EgtGetNext(EntId)
+            End While
+            RegionId = EgtGetNextName(PartId, NAME_REGION)
+         End While
+         ' passo al pezzo successico
+         PartId = EgtGetNextPart(PartId)
+      End While
+      ' Aggiorno scritte per angoli sui lati
+      WriteSideAngleForNest(nCtx)
+   End Sub
+
    Private Sub UseLayerBtn_Click(sender As Object, e As RoutedEventArgs) Handles UseLayerBtn.Click
       ' Creo i pezzi
       Dim nType As Integer = If(m_nFileType = FT.NGE, FPC_TYPE.NGE, FPC_TYPE.LAYER)
@@ -589,6 +619,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -619,6 +651,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -649,6 +683,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert

DrawImport/InternalComponentPageUC.xaml.vb

@@ -17,13 +17,14 @@ Public Class InternalComponentPageUC
       m_bIsFirstPage = True
       LoadPage()
       CurrentBtn = Nothing
+      ' bottone per selezionare la seconda pagina di componenti interni
       Compo9.SetValue(Grid.ColumnProperty, 0)
       Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      LabelCompo9.Text = EgtMsg(MSG_COMPONENTPAGEUC + 9)
+      LabelCompo9.Text = EgtMsg(MSG_COMPONENTPAGEUC + 9)                           ' Altri
       ImageCompo9.Visibility = Windows.Visibility.Hidden
       LabelCompo9.Visibility = Windows.Visibility.Visible
       ' Se i componenti interni sono più di 8 viene visualizzato il bottone "Altri" altrimenti no
-      Dim nCount As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 8 Then
          Compo9.Visibility = Windows.Visibility.Visible
       Else
@@ -162,10 +163,10 @@ Public Class InternalComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = e.Source
-      Dim CompoName As String = "InternalCompo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_INTCOMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       ' m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -251,7 +252,7 @@ Public Class InternalComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
@@ -266,7 +267,7 @@ Public Class InternalComponentPageUC
       Dim ThicknessConverter As New ThicknessConverter
 
       ' Assegnazione immagine e testo ai Button
-      For index = 1 To 8
+      For index As Integer = 1 To 8
          Dim CustomThickness As Thickness = ThicknessConverter.ConvertFromString("0")
          Dim nCompoName As Integer
          Dim sCompo As String = ""
@@ -284,7 +285,8 @@ Public Class InternalComponentPageUC
          ' Verifico presenza immagine e la aggiungo
          If sCompoImage.Length <> 0 Then
             Try
-               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
+               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
                GetImage(index).Height = 65
                GetImage(index).Width = 65
                GetImage(index).Source = sCompoImageSource
@@ -364,7 +366,27 @@ Public Class InternalComponentPageUC
 
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_MainWindow.m_DrawPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
+
+      '--------- NUOVA GESTIONE ---------
+      If m_MainWindow.m_DrawPageUC.m_CompoDimension.bEnableAlzFront Then
+         ' rimuovo l'elenco di bottoni per selezionare il tipo di componente interna
+         m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
+         ' inserisco nella Grid VaribalsesGrid lo UeserControl per definire le dimensioni della componente
+         m_MainWindow.m_DrawPageUC.VariablesGrd.Children.Add(m_MainWindow.m_DrawPageUC.m_CompoDimension)
+         ' nascondo la lista dei parametri
+         m_MainWindow.m_DrawPageUC.m_CompoDimension.CollapsedAllParam()
+         ' sto uscendo dalla componente interna (quindi comunico il cambio di componente)
+         m_MainWindow.m_DrawPageUC.m_bInternalCompo = False
+         ' comunico che sto arrivando da una componente interna
+         m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = True
+         Return
+      End If
+
+      '--------- VECCHIA GESTIONE --------- 
+      ' torno alla pagina iniziale di selezione del piano (Compo)
       m_MainWindow.m_DrawPageUC.BackBtn_Click(sender, e)
+      'm_MainWindow.m_DrawPageUC.SelectedComponent(m_MainWindow.m_DrawPageUC.m_sMainCompo)
+      m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.CompoDimension
    End Sub
 
 End Class

DrawImport/MainComponentPageUC.xaml.vb

@@ -167,10 +167,10 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = "Compo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -253,7 +253,7 @@ Public Class MainComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
@@ -268,7 +268,7 @@ Public Class MainComponentPageUC
       Dim ThicknessConverter As New ThicknessConverter
 
       'Assegnazione immagine e testo ai Button
-      For index = 1 To 8
+      For index As Integer = 1 To 8
          Dim CustomThickness As New Thickness(0)
          Dim nCompoName As Integer = GetPrivateProfileInt("Compo" & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
          Dim sCompoImage As String = ""

DrawImport/SecondaryComponentPageUC.xaml.vb

@@ -14,6 +14,7 @@ Public Class SecondaryComponentPageUC
    ' Variabile che contiene il nome del componente selezionato
    Friend m_sCurrCompo As String = String.Empty
 
+   ' dopo aver definito la forma della componente definisco quali parametri usare per la sua definizione
    Private Sub SecondaryComponentPage_Loaded(sender As Object, e As RoutedEventArgs)
 
       m_MainComponentPage = m_MainWindow.m_DrawPageUC.m_MainComponentPage
@@ -25,17 +26,17 @@ Public Class SecondaryComponentPageUC
       Dim ImageConverter As New ImageSourceConverter
       Dim ThicknessConverter As New ThicknessConverter
 
-      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam  '"Compo" & m_MainComponentPage.GetIndexFromButton(CurrentMainBtn)
+      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam
 
       'Assegnazione immagine e testo ai Button
-      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ClearButton(nCount)
       For index As Integer = 1 To nCount
          Dim CustomThickness As Thickness = ThicknessConverter.ConvertFromString("0")
-         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, "Compo" & index, 0, m_MainWindow.GetIniFile())
+         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, S_EXTCOMPO & index, 0, m_MainWindow.GetIniFile())
          Dim sCompo As String = ""
          Dim sCompoImage As String = ""
-         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, "Compo" & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
+         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, S_EXTCOMPO & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
          Dim sCompoImageSource As ImageSource
 
          'verifico presenza immagine e la aggiungo
@@ -219,8 +220,10 @@ Public Class SecondaryComponentPageUC
 
       ' Carico componente
       m_MainWindow.m_DrawPageUC.SelectedComponent(sCompo)
+      m_MainWindow.m_DrawPageUC.m_sMainCompo = sCompo
       m_sCurrCompo = "Compo" & GetButtonNumber(CurrentBtn.Name)
       m_MainWindow.m_DrawPageUC.VariablesGrd.Children.Add(m_MainWindow.m_DrawPageUC.m_CompoDimension)
+
       'm_MainWindow.m_DrawPageUC.DimensionBtn.IsChecked = True
       m_MainWindow.m_DrawPageUC.SideAngleBtn.IsChecked = False
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsChecked = False

DrawImport/SideAngle.vb

@@ -159,7 +159,7 @@ Module SideAngle
       Return True
    End Function
 
-   Private Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
+   Friend Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
       ' Verifiche
       If LoopId = GDB_ID.NULL Or TextLayId = GDB_ID.NULL Then Return False
       ' Calcolo dimensione ingombro Loop
@@ -201,7 +201,7 @@ Module SideAngle
    Friend Sub ColorToSideAngle(nCtx As Integer)
       ' Leggo dati corrispondenza colore-angolo
       Dim CurrCSA As New ColorSideAngs
-      CurrCSA.Read( m_MainWindow.GetIniFile)
+      CurrCSA.Read(m_MainWindow.GetIniFile)
       ' Imposto contesto corrente
       EgtSetCurrentContext(nCtx)
       ' Ciclo sui pezzi
@@ -212,27 +212,27 @@ Module SideAngle
          Dim LoopId As Integer = EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP)
          While LoopId <> GDB_ID.NULL
             ' Ciclo sulle curve
-            Dim PrevId As Integer = EgtGetLastInGroup( LoopId)
-            Dim EntId As Integer = EgtGetFirstInGroup( LoopId)
+            Dim PrevId As Integer = EgtGetLastInGroup(LoopId)
+            Dim EntId As Integer = EgtGetFirstInGroup(LoopId)
             While EntId <> GDB_ID.NULL
-               Dim NextId As Integer = EgtGetNext( EntId)
-               If  NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup( LoopId)
-               If VerifySideAnglePossible( PrevId, EntId, NextId, bOutLoop) Then
+               Dim NextId As Integer = EgtGetNext(EntId)
+               If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+               If VerifySideAnglePossible(PrevId, EntId, NextId, bOutLoop) Then
                   Dim colEnt As Color3d
-                  If EgtGetColor( EntId, colEnt) Then
+                  If EgtGetColor(EntId, colEnt) Then
                      Dim dAng As Double
                      Dim dHeel As Double
-                     If CurrCSA.GetSideAngHeel( colEnt, dAng, dHeel) Then
-                        EgtSetInfo( EntId, INFO_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_ORIG_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_HEEL, dHeel)
+                     If CurrCSA.GetSideAngHeel(colEnt, dAng, dHeel) Then
+                        EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_HEEL, dHeel)
                      End If
                   End If
                End If
                PrevId = EntId
-               EntId = EgtGetNext( EntId)
+               EntId = EgtGetNext(EntId)
             End While
-            If bOutLoop then
+            If bOutLoop Then
                bOutLoop = False
                LoopId = EgtGetFirstNameInGroup(PartId, NAME_INLOOP)
             Else
@@ -371,7 +371,7 @@ Module SideAngle
       End Function
 
       Friend Function GetSideAngHeel( cCol As Color3d, ByRef dAng As Double, ByRef dHeel As Double) As Boolean
-         For Each Ctsa In m_ListCtsa
+         For Each Ctsa As CTSA In m_ListCtsa
             If Ctsa.m_bOk And
                Math.Abs( cCol.R - Ctsa.m_R) < m_nTol And
                Math.Abs( cCol.G - Ctsa.m_G) < m_nTol And

DrawImport/SideAngleUc.xaml.vb

@@ -75,10 +75,12 @@ Public Class SideAngleUC
 
       ' Inizializzo lati per angoli e per gocciolatoi (ne compilo la lista e aggiungo la scritta nel disegno)
       InitSides()
-      ' Aggiorno testi nel disegno e creo i gocciolatoi
-      RefreshSideAngleText()
+      '' Aggiorno testi nel disegno e creo i gocciolatoi
+      'RefreshSideAngleText()
       ' Aggiorno check e valori
       RefreshCheckAndValue()
+      ' Aggiorno testi nel disegno e creo i gocciolatoi
+      RefreshSideAngleText()
 
       ' Gestisco visualizzazione di tutti i parametri
       If m_Mode = ModeOpt.SIDEANGLE Then
@@ -179,6 +181,10 @@ Public Class SideAngleUC
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
          ' Ricavo nome primo pezzo e lo sistemo
+         If m_Mode = ModeOpt.ENGRAVE And m_MainWindow.m_DrawPageUC.SelectedLayer = GDB_ID.NULL Then
+            PartId = EgtGetFirstPart()
+            m_MainWindow.m_DrawPageUC.SetCurrLayer(EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP))
+         End If
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
@@ -275,8 +281,8 @@ Public Class SideAngleUC
       ' Attualmente il vaore m_nCount è inizializzato ad "1"..
       ' Bottoni Prev Next
       If m_nCount <= MAX_LINES Then
-         PrevBtn.Visibility = Windows.Visibility.Hidden
-         NextBtn.Visibility = Windows.Visibility.Hidden
+         PrevBtn.Visibility= Windows.Visibility.Hidden
+         NextBtn.Visibility= Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -497,11 +503,10 @@ Public Class SideAngleUC
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
-         ' Ricavo nome primo pezzo
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
-      ElseIf m_CallingPage = MainWindow.Pages.Import Then
+         ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
          ' Recupero nome pezzo
@@ -528,7 +533,7 @@ Public Class SideAngleUC
       ' Se modalità angoli di inclinazione...
       If m_Mode = ModeOpt.SIDEANGLE Then
          ' Per ogni entità (della lista inizializzata), creo testo con nome e angolo di inclinazione
-         For Each Entity In m_SideAngleEntityList
+         For Each Entity As SideAngleEntity In m_SideAngleEntityList
             Dim sText As String = Entity.sEntityName & " = " & DoubleToString(Entity.dSideAngle, 2) & "°"
             If Entity.dSideHeel > 10 * EPS_SMALL Then sText += "; " & LenToString(Entity.dSideHeel, 2)
             SideAngle.AddTextToLine(sText, Entity.nTextId, Entity.nGeomId, 20, dBBoxRad, True)
@@ -536,7 +541,7 @@ Public Class SideAngleUC
          ' Altrimenti modalità gocciolatoio
       Else
          ' Per ogni entità creo testo con nome
-         For Each Entity In m_DripEntityList
+         For Each Entity As DripEntity In m_DripEntityList
             SideAngle.AddTextToLine(Entity.sEntityName, Entity.nTextId, Entity.nGeomId, 20, dBBoxRad, True)
          Next
          ' Creo le geometrie dei gocciolatoi
@@ -549,7 +554,7 @@ Public Class SideAngleUC
    ' refresh dei checkbox e della caselle di testo per tutte le entità presenti nelle liste SideAngle/DripEntity
    Private Sub RefreshCheckAndValue()
       If m_Mode = ModeOpt.SIDEANGLE Then
-         For nIndex = 1 To m_nCount
+         For nIndex As Integer = 1 To m_nCount
             Dim Entity As SideAngleEntity = m_SideAngleEntityList(nIndex - 1)
             ' Creo testo con angolo di inclinazione e dimensione tallone
             If nIndex < (m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
@@ -560,7 +565,7 @@ Public Class SideAngleUC
             GetHeelTxBxFromIndex(nTxBxIndex).Text = LenToString(Entity.dSideHeel, 1)
          Next
       Else
-         For nIndex = 1 To m_nCount
+         For nIndex As Integer = 1 To m_nCount
             Dim Entity As DripEntity = m_DripEntityList(nIndex - 1)
             ' Imposto check box (se sono stati definiti il numero corretto di CheckBox
             If nIndex < ( m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
@@ -568,8 +573,20 @@ Public Class SideAngleUC
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
             ' aggiorno i valore delle caselle di testo per le entità caricate (Start/End)
-            GetAngleTxBxFromIndex(nChIndex).Text = DoubleToString(Entity.dShortStart, 1)
-            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            If m_Mode = ModeOpt.ENGRAVE Then
+               Dim dVal As Double = 0
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_Start", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortStart = dVal
+               End If
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_End", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortEnd = dVal
+               End If
+            Else
+               'GetAngleTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_Start", 0, m_MainWindow.GetIniFile())
+               'GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
+            End If
+            GetAngleTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortEnd, 1)
          Next
       End If
    End Sub
@@ -633,7 +650,7 @@ Public Class SideAngleUC
       End If
       ' Per ogni entità con gocciolatoio, ne inserisco una copia nel layer
       Dim vSelId As New List(Of Integer)
-      For Each Entity In m_DripEntityList
+      For Each Entity As DripEntity In m_DripEntityList
          If Entity.bHaveDrip Then
             Dim nSouId As Integer = EgtGetFirstNameInGroup(nOutLoopId, Entity.sEntityName)
             Dim nNewId As Integer = EgtCopyGlob(nSouId, DripLayer)
@@ -731,7 +748,7 @@ Public Class SideAngleUC
       Dim vJoint As New List(Of Boolean)
       Dim bJointStart As Boolean = False
 
-      For Each Entity In m_DripEntityList
+      For Each Entity As DripEntity In m_DripEntityList
          If Entity.bHaveDrip Then
             vJoint.Add(True)
          Else
@@ -742,7 +759,7 @@ Public Class SideAngleUC
          bJointStart = True
       End If
 
-      For Each Entity In m_DripEntityList
+      For Each Entity As DripEntity In m_DripEntityList
 
          If Entity.bHaveDrip Then
             Dim nSouId As Integer = EgtGetFirstNameInGroup(nOutLoopId, Entity.sEntityName)
@@ -753,7 +770,7 @@ Public Class SideAngleUC
          End If
 
          ' devo distingure i casi in cui inserisco un valore positivo ed uno negativo!
-         For Each IdCurve In vTempSelId
+         For Each IdCurve As Integer In vTempSelId
 
             ' accorcio entrmabi i lati
             Dim dLen As Double
@@ -1366,7 +1383,7 @@ Friend Class SideAngleEntity
          Return Nothing
       End If
 
-      For Each Entity In EntityList
+      For Each Entity As SideAngleEntity In EntityList
          If Entity.m_sEntityName = sEntityName Then
             Return Entity
          End If
@@ -1455,7 +1472,7 @@ Friend Class DripEntity
          Return Nothing
       End If
 
-      For Each Entity In EntityList
+      For Each Entity As DripEntity In EntityList
          If Entity.m_sEntityName = sEntityName Then
             Return Entity
          End If

Frames/FrameCutPageUC.xaml

@@ -78,7 +78,10 @@
 
          <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
             <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+             
             <Grid>
                <Button Name="SelGuideBtn" 
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
@@ -112,9 +115,13 @@
 
          <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
             <Button Name="MirrorPartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="RemovePartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
          </UniformGrid>
 
          <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"

Frames/FrameCutPageUC.xaml.vb

@@ -61,12 +61,12 @@ Public Class FrameCutPageUC
          m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 13))        'Arco
          m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 14))        'Guida
       End If
-      SelSectionBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 15)   'Sezione
+      SelSectionBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 15)   'Sezione
       SelGuideBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 16)     'Guida
       ArcRadTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 17)         'Rad
       ArcAngTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 18)         'Ang
-      MirrorPartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
-      RemovePartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
+      MirrorPartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
+      RemovePartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y

Frames/FrameMachiningUC.xaml.vb

@@ -147,7 +147,7 @@ Public Class FrameMachiningUC
          If SysNotes <> String.Empty Then
             Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
             SysNotes = String.Empty
-            For Each Material In MachiningMaterials
+            For Each Material As Object In MachiningMaterials
                Dim Param() As String = Material.Split(",".ToCharArray)
                If Param(0) = m_CurrMachine.CurrMat.nId.ToString() Then
                   Dim dRawHeight = GetRawHeight()

Machine/AlarmsPageUC.xaml

@@ -10,116 +10,317 @@
    <!-- Definizione della AlarmsPage -->
    <Border Style="{DynamicResource OmagCut_PageBorder}" >
 
-      <Grid>
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="3*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Grid Grid.RowSpan="3">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="3*"/>
+            </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1.75*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="0.5*"/>
+
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <GroupBox Name="SetUpGpBx" Grid.ColumnSpan="3" Grid.RowSpan="9"
+            <!--Costruisco le riche per la colonna 3-->
+            <Grid Grid.Column="2" Grid.RowSpan="9">
+                <Grid.RowDefinitions>
+                    <!--GruopBox: taglio lama-->
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <!--GruopBoxs: Fresatura/>Foratura/WaterJet-->
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <!--GroupBox: vai ad Home-->
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.375*"/>
+                </Grid.RowDefinitions>
+
+                <!--Parametri Taglio Lama: 5 Parametri-->
+                <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="4">
+                    <!--definizione della grigli ainterna-->
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="2*"/>
+                        </Grid.ColumnDefinitions>
+                        <Grid.RowDefinitions>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                        </Grid.RowDefinitions>
+
+                        <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                        <EgtWPFLib:EgtTextBox Name="CutExtraLenTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                                   Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                        <TextBlock Name="AngleCutExtraLenTxBl" Grid.Column="0" Grid.Row="1"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                        <EgtWPFLib:EgtTextBox Name="AngleCutExtraLenTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                                   Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                        <TextBlock Name="ExtArcMinRadTxBl" Grid.Column="0" Grid.Row="2"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                        <EgtWPFLib:EgtTextBox Name="ExtArcMinRadTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                        <TextBlock Name="IntArcMaxSideAngTxBl" Grid.Column="0" Grid.Row="3"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                        <EgtWPFLib:EgtTextBox Name="IntArcMaxSideAngTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+                                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                        <TextBlock Name="PreCutExitTxBl" Grid.Column="0" Grid.Row="4"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                        <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
+                                  Style="{StaticResource OmagCut_CheckBox_Single}" 
+                                  HorizontalAlignment="Right"/>
+
+                    </Grid>
+
+                </GroupBox>
+
+                <Grid Grid.Column="2" Grid.Row="4" Grid.RowSpan="8">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition />
+                        <ColumnDefinition />
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="*"/>
+                        <RowDefinition Height="*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="*"/>
+                        <RowDefinition Height="*"/>
+                    </Grid.RowDefinitions>
+
+                    <!--Parametri fori: 4 Parametri-->
+                    <GroupBox Name="HolesGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3" 
+                              Style="{DynamicResource OmagCut_GroupBox}">
+
+                        <Grid>
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="145*"/>
+                                <ColumnDefinition Width="23*"/>
+                                <ColumnDefinition Width="169*"/>
+                            </Grid.ColumnDefinitions>
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="0.5*"/>
+                                <RowDefinition Height="0.5*"/>
+                                <RowDefinition Height="0.5*"/>
+                                <RowDefinition Height="0.5*"/>
+                            </Grid.RowDefinitions>
+
+                            <TextBlock Name="HolesOffsetTxBl" Grid.Column="0" Grid.Row="0"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                            <EgtWPFLib:EgtTextBox Name="HolesOffsetTxBx" Grid.Column="2" Grid.Row="0" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                            <TextBlock Name="HolesOverlapTxBl" Grid.Column="0" Grid.Row="1"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                            <EgtWPFLib:EgtTextBox Name="HolesOverlapTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                            <TextBlock Name="HolesToleranceTxBl" Grid.Column="0" Grid.Row="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                            <EgtWPFLib:EgtTextBox Name="HolesToleranceTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                            <TextBlock Name="OneHoleInCornerTxBl" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="3"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+                            <CheckBox Name="OneHoleInCornerChBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="10,0,10,0"/>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                    <!--Parametri Fresatura: 3 Parametri-->
+                    <GroupBox Name="MillingsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                        <Grid Grid.Column="3" Grid.Row="2">
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                            </Grid.ColumnDefinitions>
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="*"/>
+                                <RowDefinition Height="*"/>
+                                <RowDefinition Height="*"/>
+                            </Grid.RowDefinitions>
+
+                            <TextBlock Name="CornerCutsTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                            <CheckBox Name="CornerCutsChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                            <TextBlock Name="InternalCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
+                            <CheckBox Name="InternalCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                            <TextBlock Name="ShortTxBl" Grid.Column="0" Grid.Row="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ShortTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                    <!--Parametri WaterJet: 1 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
+                    <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="1" 
+                              Style="{DynamicResource OmagCut_GroupBox}">
+                        <Grid Grid.Column="3" Grid.Row="2">
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                            </Grid.ColumnDefinitions>
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="*"/>
+                            </Grid.RowDefinitions>
+
+                            <TextBlock Name="WjIntCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
+                            <CheckBox Name="WjIntCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                        </Grid>
+                    </GroupBox>
+
+                </Grid>
+
+                <!--Parametri Taglio diretto: 1 Parametro-->
+                <GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="12" Grid.RowSpan="2">
+                    <Grid>
+                        <TextBlock Name="FinalHomeTxBl"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                        <CheckBox Name="FinalHomeChBx" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+                    </Grid>
+
+                </GroupBox>
+
+            </Grid>
+
+            <Grid Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1.75*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <GroupBox Name="SetUpGpBx" Grid.ColumnSpan="3" Grid.RowSpan="9"
                Style="{DynamicResource OmagCut_GroupBox}">
 
-               <Grid Name="CurrToolsGrid" Grid.ColumnSpan="2">
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="0.5*"/>
-                     <ColumnDefinition Width="3*"/>
-                     <ColumnDefinition Width="0.5*"/>
-                  </Grid.ColumnDefinitions>
-                  <Grid.RowDefinitions>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                  </Grid.RowDefinitions>
+                    <Grid Name="CurrToolsGrid" Grid.ColumnSpan="2">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="0.5*"/>
+                            <ColumnDefinition Width="3*"/>
+                            <ColumnDefinition Width="0.5*"/>
+                        </Grid.ColumnDefinitions>
+                        <Grid.RowDefinitions>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="0.5*"/>
+                        </Grid.RowDefinitions>
 
-                  <TextBlock Name="CurrSawTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrSawTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-                  <ComboBox x:Name="CurrSawCmBx" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_ComboBox}">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox x:Name="CurrSawCmBx" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_ComboBox}">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="AuxiliaryToolTxBl" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="3"
+                        <TextBlock Name="AuxiliaryToolTxBl" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="AuxiliaryToolCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="AuxiliaryToolCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrDrillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrDrillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrDrillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrDrillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrMillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrMillTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrMillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrMillCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <TextBlock Name="CurrWJetTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                        <TextBlock Name="CurrCupWheelTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                  <ComboBox Name="CurrWJetCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                     <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                     </ComboBox.ItemTemplate>
-                  </ComboBox>
+                        <ComboBox Name="CurrCupWheelCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
 
-                  <Button Name="SetUpBtn"  Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Visibility="Hidden"
+                        <TextBlock Name="CurrWJetTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                     Visibility="Hidden"/>
+                        <ComboBox Name="CurrWJetCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                            <ComboBox.ItemTemplate>
+                                <DataTemplate>
+                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                </DataTemplate>
+                            </ComboBox.ItemTemplate>
+                        </ComboBox>
+
+                        <Button Name="SetUpBtn"  Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Visibility="Hidden"
                      Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-               </Grid>
+                    </Grid>
 
-            </GroupBox>
+                </GroupBox>
 
-         </Grid>
+            </Grid>
 
-         <Grid Grid.Column="2" Grid.Row="2" Grid.RowSpan="5">
+            <!--<Grid Grid.Column="2" Grid.Row="2" Grid.RowSpan="6">
             <Grid.ColumnDefinitions>
                <ColumnDefinition />
                <ColumnDefinition />
@@ -221,92 +422,108 @@
                </Grid>
             </GroupBox>
 
-         </Grid>
+         </Grid>-->
 
-         <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+            <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
             Grid.Row="3" Grid.ColumnSpan="1" Grid.RowSpan="5">
 
-            <Grid>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="2.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="2.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ListBox Name="MaterialsLstBx" Grid.RowSpan="2">
-                  <ListBox.ItemTemplate>
-                     <DataTemplate>
-                        <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                     </DataTemplate>
-                  </ListBox.ItemTemplate>
-               </ListBox>
+                    <ListBox Name="MaterialsLstBx" Grid.RowSpan="2">
+                        <ListBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ListBox.ItemTemplate>
+                    </ListBox>
 
-               <EgtWPFLib:EgtTextBox Name="MatNameTxBx" Grid.Row="1" Width="240" Visibility="Hidden"
+                    <EgtWPFLib:EgtTextBox Name="MatNameTxBx" Grid.Row="1" Width="240" Visibility="Hidden"
                   Style="{DynamicResource OmagCut_KeyboardTextBox}" />
 
-               <UniformGrid Grid.Row="2" Columns="2">
-                  <Button Name="NewMatBtn" Grid.Column="1"
+                    <UniformGrid Grid.Row="2" Columns="2">
+                        <Button Name="NewMatBtn" Grid.Column="1"
                      Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-                  <Button Name="RemoveMatBtn" Grid.Column="1"
+                        <Button Name="RemoveMatBtn" Grid.Column="1"
                      Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               </UniformGrid>
+                    </UniformGrid>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1"
+            <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1"
                      Grid.Row="0" Grid.ColumnSpan="1" Grid.RowSpan="3">
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="CurrSawingTxBl" Grid.Column="0" Grid.Row="0"
+                    <TextBlock Name="CurrSawingTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrSawingTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrSawingTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-                  <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrMillingTxBl" Grid.Column="0" Grid.Row="2"
+                    <TextBlock Name="CurrMillingTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrMillingTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrMillingTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrWaterJettingTxBl" Grid.Column="0" Grid.Row="3"
+                    <TextBlock Name="CurrPocketingTxBl" Grid.Column="0" Grid.Row="3"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrPocketingTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrDripSawingTxBl" Grid.Column="0" Grid.Row="4"
+                    <TextBlock Name="CurrWaterJettingTxBl" Grid.Column="0" Grid.Row="4"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrDripSawingTxBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
+
+                    <Grid Grid.Column="1" Grid.Row="4">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="5*"/>
+                            <ColumnDefinition Width="1.5*"/>
+                        </Grid.ColumnDefinitions>
+                        <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="0" Margin="10,0,5,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+                        <EgtWPFLib:EgtTextBox Name="CurrWaterJettingQualityTxBx" Grid.Column="1" Margin="0,0,10,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+                    </Grid>
+
+
+                    <TextBlock Name="CurrDripSawingTxBl" Grid.Column="0" Grid.Row="5"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                    <EgtWPFLib:EgtTextBox Name="CurrDripSawingTxBx" Grid.Column="1" Grid.Row="5" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-               <TextBlock Name="CurrDripDrillingTxBl" Grid.Column="0" Grid.Row="5"
+                    <TextBlock Name="CurrDripDrillingTxBl" Grid.Column="0" Grid.Row="6"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrDripDrillingTxBx" Grid.Column="1" Grid.Row="5" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CurrDripDrillingTxBx" Grid.Column="1" Grid.Row="6" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="2">
+            <!--<GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="2">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -317,6 +534,7 @@
                   <RowDefinition Height="0.5*"/>
                   <RowDefinition Height="0.5*"/>
                   <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
                </Grid.RowDefinitions>
 
                <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
@@ -341,53 +559,53 @@
 
             </Grid>
 
-         </GroupBox>
+         </GroupBox>-->
 
-         <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition />
-               <ColumnDefinition />
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-               <RowDefinition Height="*"/>
-            </Grid.RowDefinitions>
+            <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition />
+                    <ColumnDefinition />
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                    <RowDefinition Height="*"/>
+                </Grid.RowDefinitions>
 
-            <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="2">
-               <Grid Grid.Column="2" Grid.Row="1">
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
+                <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                    <Grid Grid.Column="2" Grid.Row="1">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="2*"/>
+                        </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="SafeZTxBl" Grid.Column="0"
+                        <TextBlock Name="SafeZTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="SafeZTxBx" Grid.Column="1" Margin="10,0,10,0"
+                        <EgtWPFLib:EgtTextBox Name="SafeZTxBx" Grid.Column="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </Grid>
+                    </Grid>
 
-            </GroupBox>
+                </GroupBox>
 
-            <Border Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" Grid.RowSpan="2">
-               <Grid >
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
+                <Border Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                    <Grid >
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="2*"/>
+                        </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="AdditionalTableTxBl" Grid.Column="0"
+                        <TextBlock Name="AdditionalTableTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                  <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Margin="10,0,10,0"
+                        <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </Grid>
+                    </Grid>
 
-            </Border>
+                </Border>
 
-         </Grid>
+            </Grid>
 
-         <GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="7">
+            <!--<GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="8">
             <Grid>
                <TextBlock Name="FinalHomeTxBl"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
@@ -395,174 +613,210 @@
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
             </Grid>
 
-         </GroupBox>
+         </GroupBox>-->
 
-         <GroupBox Name="NestingParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="2">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
-
-               <TextBlock Name="CompleteCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="CompleteCutsChBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-               <TextBlock Name="AlignTxBl" Grid.Row="1" Grid.ColumnSpan="2"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="AlignChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-               <TextBlock Name="AutomaticTxBl" Grid.Row="2" Grid.ColumnSpan="2"
-                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="AutomaticChBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-            </Grid>
-
-         </GroupBox>
-
-         <GroupBox Name="AutoRawImageParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
-
-               <Grid Grid.ColumnSpan="2">
-                  <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="0.5*"/>
+            <GroupBox Name="NestingParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3">
+                <Grid Name="NestingGrid">
+                    <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                  </Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-                  <Button Name="BackImageBtn" Grid.Column="1"
+                    <TextBlock Name="CompleteCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="CompleteCutsChBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                    <!--Allineato-->
+                    <TextBlock Name="AlignTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="AlignChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                    <!--Ghigliottina-->
+                    <TextBlock Name="GhigliottinaTxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="GhigliottinaChBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                    <!--Automatico-->
+                    <TextBlock Name="AutomaticTxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="AutomaticChBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+
+
+                </Grid>
+
+            </GroupBox>
+
+            <GroupBox Name="AutoRawImageParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
+
+                    <Grid Grid.ColumnSpan="2">
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="0.5*"/>
+                            <ColumnDefinition Width="2*"/>
+                            <ColumnDefinition Width="0.5*"/>
+                        </Grid.ColumnDefinitions>
+
+                        <Button Name="BackImageBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-               </Grid>
+                    </Grid>
 
-               <TextBlock Name="ThresholdTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="ThresholdTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ThresholdTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="ThresholdTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               <TextBlock Name="ToleranceTxBl" Grid.Column="0" Grid.Row="2"
+                    <TextBlock Name="ToleranceTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ToleranceTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="ToleranceTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="CutFredGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+            <GroupBox Name="CutFredGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
             Grid.Row="2" Grid.RowSpan="1">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="CfrLenTxBl" Grid.Column="0"
+                    <TextBlock Name="CfrLenTxBl" Grid.Column="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CfrLenTxBx" Grid.Column="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CfrLenTxBx" Grid.Column="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               <TextBlock Name="CfrPercTxBl" Grid.Column="0" Grid.Row="1"
+                    <TextBlock Name="CfrPercTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-          <!--Incisioni--> 
-         <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+            <!--Incisioni-->
+            <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
             Grid.Row="3" Grid.RowSpan="3">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-                <!--Utilizza fresa-->
-               <TextBlock Name="TmEnableTxBl" Grid.Column="0" Grid.Row="0"
+                    <!--Utilizza fresa-->
+                    <TextBlock Name="TmEnableTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="TmEnableChBx" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="TmEnableChBx" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="10,0,10,0"/>
-                <!--Affondamento-->
-               <TextBlock Name="TmDepthTxBl" Grid.Column="0" Grid.Row="1"
+                    <!--Affondamento-->
+                    <TextBlock Name="TmDepthTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="TmDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="TmDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                <!--Larghezza-->
-               <TextBlock Name="TmWidthTxBl" Grid.Column="0" Grid.Row="2"
+                    <!--Larghezza-->
+                    <TextBlock Name="TmWidthTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="TmWidthTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                    <EgtWPFLib:EgtTextBox Name="TmWidthTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
 
-         <Border  Name="SideAngCutProbeGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="6">
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <Border  Name="SideAngCutProbeGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="6">
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-               <TextBlock Name="SideAngCutProbeTxBl" Grid.Column="0" Grid.Row="0"
+                    <TextBlock Name="SideAngCutProbeTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="SideAngCutProbeChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="SideAngCutProbeChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
-            </Grid>
+                </Grid>
 
-         </Border>
+            </Border>
 
-         <Border Name="WashingGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="7">
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <Border Name="WashingGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="7">
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-               <TextBlock Name="WashingTxBl" Grid.Column="0" Grid.Row="0"
+                    <TextBlock Name="WashingTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="WashingChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                    <CheckBox Name="WashingChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
-            </Grid>
+                </Grid>
 
-         </Border>
+            </Border>
 
-         <UniformGrid Columns="4" Grid.Row="8">
-            <Button x:Name="SawProbingBtn"
+            <!--Cornici-->
+            <GroupBox Name="FrameGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="8">
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="FramePauseTxBl" Grid.Column="0" Grid.Row="0"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                    <CheckBox Name="FramePauseChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+               HorizontalAlignment="Right" Margin="0,0,10,0"/>
+                </Grid>
+
+            </GroupBox>
+
+            <Grid Grid.Column="0" Grid.Row="8">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2.5*"/>
+                    <ColumnDefinition Width="5*"/>
+                    <ColumnDefinition Width="2*"/>
+                </Grid.ColumnDefinitions>
+                <Button x:Name="SawProbingBtn"
          	   Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-               <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
-            </Button>
+                    <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+                </Button>
 
-         </UniformGrid>
-
-      </Grid>
-
-   </Border>
+                
+                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="2"
+                  HorizontalAlignment="Right" Margin="10,0,10,0"/>
+            </Grid>
+            
+        </Grid>
+    </Border>
 
 </UserControl>

Machine/AlarmsPageUC.xaml.vb

@@ -20,6 +20,7 @@ Public Class AlarmsPageUC
    Private m_SawList As New ObservableCollection(Of String)
    Private m_DrillList As New ObservableCollection(Of String)
    Private m_MillList As New ObservableCollection(Of String)
+   Private m_CupWheelList As New ObservableCollection(Of String)
    Private m_WaterJetList As New ObservableCollection(Of String)
    Private m_AuxToolTypeList As New List(Of StringIdCmBx)
 
@@ -32,6 +33,7 @@ Public Class AlarmsPageUC
       CurrSawCmBx.ItemsSource = m_SawList
       CurrDrillCmBx.ItemsSource = m_DrillList
       CurrMillCmBx.ItemsSource = m_MillList
+      CurrCupWheelCmBx.ItemsSource = m_CupWheelList
       CurrWJetCmBx.ItemsSource = m_WaterJetList
       AuxiliaryToolCmBx.ItemsSource = m_AuxToolTypeList
 
@@ -47,6 +49,7 @@ Public Class AlarmsPageUC
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
       CurrDrillTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 3)
+      CurrCupWheelTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 20)
       CurrMillTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 4)
       CurrWJetTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 0)
       HolesOffsetTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 9)
@@ -64,6 +67,7 @@ Public Class AlarmsPageUC
       HolesGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 17)
       ExtArcMinRadTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 18)
       IntArcMaxSideAngTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 24)
+      PreCutExitTxBl.Text = EgtMsg(91065)                                ' PreTaglio uscite
       MachineParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 19)
       SawGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 25)
       DirectCutsParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 27)         ' Tagli diretti
@@ -79,7 +83,8 @@ Public Class AlarmsPageUC
       WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
       WjIntCutsTxBl.Text = EgtMsg( 90930)                                ' Sempre sugli interni
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
-      AlignTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 32)                     ' Allineato
+      AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
+      GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
       AutomaticTxBl.Text = EgtMsg(91059)                                 ' Automatico
       SetUpBtn.Content = EgtMsg(MSG_ALARMSPAGEUC + 33)                   ' Attrezzaggio
       NewMatBtn.Content = EgtMsg(MSG_ALARMSPAGEUC + 34)                  ' Nuovo
@@ -98,9 +103,13 @@ Public Class AlarmsPageUC
       CurrSawingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 2)                ' Taglio lama
       CurrDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 3)              ' Foratura
       CurrMillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 4)               ' Fresatura
+      CurrPocketingTxBl.Text = EgtMsg(91069)                             ' Svuotatura
       CurrWaterJettingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 7)          ' WaterJet
       CurrDripSawingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 5)            ' DripSawing
       CurrDripDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 6)          ' DripDrilling
+      FrameGpBx.Header = EgtMsg(91068)                                   ' Cornici
+      FramePauseTxBl.Text = EgtMsg(91067)                                ' Inserisci pausa
+      UseLaserOriginTxBl.Text = EgtMsg(91129)                            ' Usa laser per origine
       AutoRawImageParamGpBx.Visibility = Windows.Visibility.Hidden
    End Sub
 
@@ -110,11 +119,19 @@ Public Class AlarmsPageUC
          ' Variabile che accorcia il riferimento alla macchina corrente
          m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
+         ' in assenza dell'uscita H1 nascondo i parametri lama
+         If EgtGetHeadId("H1") = GDB_ID.NULL Then
+            SawGpBx.Visibility = Visibility.Hidden
+            TopMillGpBx.Visibility = Visibility.Hidden
+            CurrSawTxBl.Visibility = Visibility.Hidden
+            CurrSawCmBx.Visibility = Visibility.Hidden
+         End If
+
          ' Verifico la configurazione della macchina per creare i combobox
          Select Case m_CurrentMachine.MountedToolConfig
             Case CurrentMachine.MountedToolConfigs.SAW
                ' Elimino le righe inutili e riduco il groupbox utensili correnti
-               For Index = 7 - 1 To 2 Step -1
+               For Index As Integer = 7 - 1 To 2 Step -1
                   CurrToolsGrid.RowDefinitions.RemoveAt(Index)
                Next
                Dim EndRow As New RowDefinition
@@ -124,7 +141,7 @@ Public Class AlarmsPageUC
                ' Disattivo il gruppo dei parametri fori
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
-               'Non faccio alcunchè
+            'Non faccio alcunchè
             Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
                'Da implementare
          End Select
@@ -143,7 +160,7 @@ Public Class AlarmsPageUC
 
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
-            WJsParamGpBx.Visibility = Visibility.Hidden
+            WjsParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -156,7 +173,7 @@ Public Class AlarmsPageUC
          End If
 
          ' Abilitazione Feed ridotta su inizio/fine tagli
-         If m_CurrentMachine.bFsevEnable Then
+         If m_CurrentMachine.bFsevEnable And EgtGetHeadId("H1") <> GDB_ID.NULL Then
             CutFredGpBx.Visibility = Windows.Visibility.Visible
          Else
             CutFredGpBx.Visibility = Windows.Visibility.Hidden
@@ -171,38 +188,56 @@ Public Class AlarmsPageUC
          m_bFirst = False
       End If
 
-      ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
-      CreateToolList(MCH_TF.SAWBLADE, m_SawList)
+         ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
+         CreateToolList(MCH_TF.SAWBLADE, m_SawList)
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
+      ' nascondo la lista dei materiali solo se macchina WaterJet
+      If m_CurrentMachine.bWaterJet Then
+         MaterialsGpBx.Visibility = Visibility.Hidden
+      End If
+
       ' Verifico la configurazione della macchina per creare i combobox
       Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
-            ' Non compio alcuna azione
+            ' Non compio alcuna azione (non sono previsti utensili ausiliari)
+
          Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
             m_AuxToolTypeList.Clear()
+            ' creo l'elenco degli utensili ausiliri
             If m_CurrentMachine.bDrill Then
                m_AuxToolTypeList.Add(New StringIdCmBx(1, EgtMsg(MSG_ALARMSPAGEUC + 21)))      ' Foretto
             End If
             If m_CurrentMachine.bMill Then
                m_AuxToolTypeList.Add(New StringIdCmBx(2, EgtMsg(MSG_ALARMSPAGEUC + 22)))      ' Fresa
             End If
+            If m_CurrentMachine.bCupWheel Then
+               m_AuxToolTypeList.Add(New StringIdCmBx(3, EgtMsg(MSG_TOOLSDBPAGEUC + 34)))     ' Mola da scasso
+            End If
             If m_CurrentMachine.bWaterJet Then
-               m_AuxToolTypeList.Add(New StringIdCmBx(3, EgtMsg(MSG_TOOLSDBPAGEUC + 35)))      ' WaterJet
+               m_AuxToolTypeList.Add(New StringIdCmBx(4, EgtMsg(MSG_TOOLSDBPAGEUC + 35)))     ' WaterJet
             End If
             ' Aggiungo elemento nessuno in fondo alla lista
             m_AuxToolTypeList.Add(New StringIdCmBx(0, EgtMsg(MSG_ALARMSPAGEUC + 20)))         ' Nessuno
 
+            ' ComboBox per la selezione dell'utensile ausiliario
             AuxiliaryToolTxBl.Visibility = Windows.Visibility.Visible
             AuxiliaryToolCmBx.Visibility = Windows.Visibility.Visible
+            ' Drilling
             CurrDrillTxBl.Visibility = Windows.Visibility.Hidden
             CurrDrillCmBx.Visibility = Windows.Visibility.Hidden
+            ' Milling
             CurrMillTxBl.Visibility = Windows.Visibility.Hidden
             CurrMillCmBx.Visibility = Windows.Visibility.Hidden
+            ' Pocketing
+            CurrCupWheelTxBl.Visibility = Windows.Visibility.Hidden
+            CurrCupWheelCmBx.Visibility = Windows.Visibility.Hidden
+            ' WaterJet
             CurrWJetTxBl.Visibility = Windows.Visibility.Hidden
             CurrWJetCmBx.Visibility = Windows.Visibility.Hidden
 
+            ' verifico quale utensile è attulamente "montato sulla macchina"
             If m_CurrentMachine.sCurrDrill <> String.Empty Then
                CreateToolList(MCH_TF.DRILLBIT, m_DrillList)
                m_DrillList.Add(NO_TOOL)
@@ -211,17 +246,24 @@ Public Class AlarmsPageUC
                CurrDrillTxBl.Visibility = Windows.Visibility.Visible
                CurrDrillCmBx.Visibility = Windows.Visibility.Visible
             ElseIf m_CurrentMachine.sCurrMill <> String.Empty Then
-               CreateToolList(MCH_TF.MILL, m_MillList)
+               CreateToolList(MCH_TF.MILL, MCH_TY.MILL_STD, m_MillList)
                m_MillList.Add(NO_TOOL)
                CurrMillCmBx.SelectedItem = m_CurrentMachine.sCurrMill
                AuxiliaryToolCmBx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(2, m_AuxToolTypeList)
                CurrMillTxBl.Visibility = Windows.Visibility.Visible
                CurrMillCmBx.Visibility = Windows.Visibility.Visible
+            ElseIf m_CurrentMachine.sCurrMillNoTip <> String.Empty Then
+               CreateToolList(MCH_TF.MILL, MCH_TY.MILL_NOTIP, m_CupWheelList)
+               m_CupWheelList.Add(NO_TOOL)
+               CurrCupWheelCmBx.SelectedItem = m_CurrentMachine.sCurrMillNoTip
+               AuxiliaryToolCmBx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(3, m_AuxToolTypeList)
+               CurrCupWheelTxBl.Visibility = Windows.Visibility.Visible
+               CurrCupWheelCmBx.Visibility = Windows.Visibility.Visible
             ElseIf m_CurrentMachine.sCurrWaterJet <> String.Empty Then
                CreateToolList(MCH_TF.WATERJET, m_WaterJetList)
                m_WaterJetList.Add(NO_TOOL)
                CurrWJetCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJet
-               AuxiliaryToolCmBx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(3, m_AuxToolTypeList)
+               AuxiliaryToolCmBx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(4, m_AuxToolTypeList)
                CurrWJetTxBl.Visibility = Windows.Visibility.Visible
                CurrWJetCmBx.Visibility = Windows.Visibility.Visible
             Else
@@ -229,54 +271,13 @@ Public Class AlarmsPageUC
             End If
 
          Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            ' attivo il bottone per l'apertura della pagina che mostra la configurazione degli utensili in parcheggio
             SetUpBtn.Visibility = Windows.Visibility.Visible
 
       End Select
 
-      ' Verifico la configurazione della macchina per creare i textbox delle lavorazioni
-      CurrSawingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrSawingTxBx.Visibility = Windows.Visibility.Hidden
-      CurrDrillingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrDrillingTxBx.Visibility = Windows.Visibility.Hidden
-      CurrMillingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrMillingTxBx.Visibility = Windows.Visibility.Hidden
-      CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden
-      CurrDripSawingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrDripSawingTxBx.Visibility = Windows.Visibility.Hidden
-      CurrDripDrillingTxBl.Visibility = Windows.Visibility.Hidden
-      CurrDripDrillingTxBx.Visibility = Windows.Visibility.Hidden
-
-      If m_CurrentMachine.sCurrSawing <> String.Empty Then
-         CurrSawingTxBx.Text = m_CurrentMachine.sCurrSawing
-         CurrSawingTxBl.Visibility = Windows.Visibility.Visible
-         CurrSawingTxBx.Visibility = Windows.Visibility.Visible
-      End If
-      If m_CurrentMachine.sCurrDrilling <> String.Empty Then
-         CurrDrillingTxBx.Text = m_CurrentMachine.sCurrDrilling
-         CurrDrillingTxBl.Visibility = Windows.Visibility.Visible
-         CurrDrillingTxBx.Visibility = Windows.Visibility.Visible
-      End If
-      If m_CurrentMachine.sCurrMilling <> String.Empty Then
-         CurrMillingTxBx.Text = m_CurrentMachine.sCurrMilling
-         CurrMillingTxBl.Visibility = Windows.Visibility.Visible
-         CurrMillingTxBx.Visibility = Windows.Visibility.Visible
-      End If
-      If m_CurrentMachine.sCurrwaterJetting <> String.Empty Then
-         CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrwaterJetting
-         CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
-         CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-      End If
-      If m_CurrentMachine.sCurrDripSawing <> String.Empty Then
-         CurrDripSawingTxBx.Text = m_CurrentMachine.sCurrDripSawing
-         CurrDripSawingTxBl.Visibility = Windows.Visibility.Visible
-         CurrDripSawingTxBx.Visibility = Windows.Visibility.Visible
-      End If
-      If m_CurrentMachine.sCurrDripDrilling <> String.Empty Then
-         CurrDripDrillingTxBx.Text = m_CurrentMachine.sCurrDripDrilling
-         CurrDripDrillingTxBl.Visibility = Windows.Visibility.Visible
-         CurrDripDrillingTxBx.Visibility = Windows.Visibility.Visible
-      End If
+      ' aggiorno le TextBlock con le lavorazioni correnti
+      RefreschMachining()
 
       ' Leggo offset fori
       Dim dVal As Double
@@ -308,6 +309,14 @@ Public Class AlarmsPageUC
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_EXTARCMINRAD, 200, m_MainWindow.GetMachIniFile())
       EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
       ExtArcMinRadTxBx.Text = LenToString(dVal, 2)
+      ' Leggo se PreCutExit attivo (per taglio ceramico)
+      Dim nPreCutExit As Integer = GetPrivateProfileInt(S_MACH_NEST, K_MACH_PRECUTEXIT, -1, m_MainWindow.GetMachIniFile())
+      If nPreCutExit = -1 Then
+         PreCutExitTxBl.Visibility = Visibility.Hidden
+         PreCutExitChBx.Visibility = Visibility.Hidden
+      Else
+         PreCutExitChBx.IsChecked = ( nPreCutExit <> 0)
+      End If
       ' Leggo angolo di fianco massimo arco interno
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, 45, m_MainWindow.GetMachIniFile())
       EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
@@ -341,10 +350,16 @@ Public Class AlarmsPageUC
       ' Flag per nesting allineato
       AlignChBx.IsChecked =
              (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_ALIGNED, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Flag per nesting a ghigliottina
+      GhigliottinaChBx.IsChecked =
+             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_GHIGLIOTTINA, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Flag per nesting automatico
       AutomaticChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_AUTOMATIC, 0, m_MainWindow.GetMachIniFile()) <> 0)
-      AdjustAlignTextOnAutomaticOrCompleteCuts()
+             (GetPrivateProfileInt(S_NEST, K_AUTOMATICOPTIMIZE, 0, m_MainWindow.GetIniFile()) <> 0)
+      AdjustGhigliottinaTextOnAutomaticOrCompleteCuts()
+      ' Flag per inserire la puasa dopo la sgrossatura delle cornici
+      FramePauseChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_FRAME, K_MACH_PAUSE, 1, m_MainWindow.GetMachIniFile()) <> 0)
       ' Aggiorno messaggio sovratavola con numero tavola
       If GetTableCount() > 1 Then
          AdditionalTableTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 36) & " " & GetCurrentTable().ToString()
@@ -373,13 +388,90 @@ Public Class AlarmsPageUC
       ' Leggo parametri per variazione feed in tagli
       CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
       CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
+      ' leggo flag per tavola definita da laser
+      Dim nUseLaserOrigin As Integer = GetPrivateProfileInt(S_TABLE, K_USELASERORIGIN, -1, m_MainWindow.GetMachIniFile())
+      If nUseLaserOrigin = -1 Then
+         UseLaserOriginTxBl.Visibility = Visibility.Hidden
+         UseLaserOriginChBx.Visibility = Visibility.Hidden
+      Else
+         UseLaserOriginTxBl.Visibility = Visibility.Visible
+         UseLaserOriginChBx.IsChecked = (nUseLaserOrigin <> 0)
+      End If
+
    End Sub
 
+   ' aggiorna le text delle lavorazioni (la selezione avviene nella pagina del grezzo o dalla pagina del progetto corrente)
+   Private Sub RefreschMachining()
+      If m_CurrentMachine.sCurrSawing <> String.Empty Then
+         CurrSawingTxBx.Text = m_CurrentMachine.sCurrSawing
+         CurrSawingTxBl.Visibility = Windows.Visibility.Visible
+         CurrSawingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrSawingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrSawingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrDrilling <> String.Empty Then
+         CurrDrillingTxBx.Text = m_CurrentMachine.sCurrDrilling
+         CurrDrillingTxBl.Visibility = Windows.Visibility.Visible
+         CurrDrillingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrDrillingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrDrillingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrMilling <> String.Empty Then
+         CurrMillingTxBx.Text = m_CurrentMachine.sCurrMilling
+         CurrMillingTxBl.Visibility = Windows.Visibility.Visible
+         CurrMillingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrMillingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrMillingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrPocketing <> String.Empty Then
+         CurrPocketingTxBx.Text = m_CurrentMachine.sCurrPocketing
+         CurrPocketingTxBl.Visibility = Windows.Visibility.Visible
+         CurrPocketingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrPocketingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrPocketingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrWaterJetting <> String.Empty Then
+         CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
+         CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+         CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
+         CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
+         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden
+         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrDripSawing <> String.Empty Then
+         CurrDripSawingTxBx.Text = m_CurrentMachine.sCurrDripSawing
+         CurrDripSawingTxBl.Visibility = Windows.Visibility.Visible
+         CurrDripSawingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrDripSawingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrDripSawingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+      If m_CurrentMachine.sCurrDripDrilling <> String.Empty Then
+         CurrDripDrillingTxBx.Text = m_CurrentMachine.sCurrDripDrilling
+         CurrDripDrillingTxBl.Visibility = Windows.Visibility.Visible
+         CurrDripDrillingTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrDripDrillingTxBl.Visibility = Windows.Visibility.Hidden
+         CurrDripDrillingTxBx.Visibility = Windows.Visibility.Hidden
+      End If
+   End Sub
+
+   ' questo metodo è utilizzato solo per le macchine con utensile ausiliario (Assenza del bottone Attrezzaggio-> monta un solo utensila per volta
    Private Sub AuxiliaryToolCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles AuxiliaryToolCmBx.SelectionChanged
       CurrDrillTxBl.Visibility = Windows.Visibility.Hidden
       CurrDrillCmBx.Visibility = Windows.Visibility.Hidden
       CurrMillTxBl.Visibility = Windows.Visibility.Hidden
       CurrMillCmBx.Visibility = Windows.Visibility.Hidden
+      CurrCupWheelTxBl.Visibility = Windows.Visibility.Hidden
+      CurrCupWheelCmBx.Visibility = Windows.Visibility.Hidden
       CurrWJetTxBl.Visibility = Windows.Visibility.Hidden
       CurrWJetCmBx.Visibility = Windows.Visibility.Hidden
       Dim SelectedItem As StringIdCmBx = AuxiliaryToolCmBx.SelectedItem
@@ -396,11 +488,15 @@ Public Class AlarmsPageUC
                CurrDrillCmBx.SelectedItem = m_CurrentMachine.sCurrDrill
             End If
             m_CurrentMachine.sCurrMill = String.Empty
+            m_CurrentMachine.sCurrMilling = String.Empty
+            m_CurrentMachine.sCurrMillNoTip = String.Empty
+            m_CurrentMachine.sCurrPocketing = String.Empty
             m_CurrentMachine.sCurrWaterJet = String.Empty
+            m_CurrentMachine.sCurrWaterJetting = String.Empty
             CurrDrillTxBl.Visibility = Windows.Visibility.Visible
             CurrDrillCmBx.Visibility = Windows.Visibility.Visible
          Case 2
-            CreateToolList(MCH_TF.MILL, m_MillList)
+            CreateToolList(MCH_TF.MILL, MCH_TY.MILL_STD, m_MillList)
             m_MillList.Add(NO_TOOL)
             If m_CurrentMachine.sCurrMill = String.Empty Then
                CurrMillCmBx.SelectedItem = NO_TOOL
@@ -408,10 +504,30 @@ Public Class AlarmsPageUC
                CurrMillCmBx.SelectedItem = m_CurrentMachine.sCurrMill
             End If
             m_CurrentMachine.sCurrDrill = String.Empty
+            m_CurrentMachine.sCurrDrilling = String.Empty
+            m_CurrentMachine.sCurrMillNoTip = String.Empty
+            m_CurrentMachine.sCurrPocketing = String.Empty
             m_CurrentMachine.sCurrWaterJet = String.Empty
+            m_CurrentMachine.sCurrWaterJetting = String.Empty
             CurrMillTxBl.Visibility = Windows.Visibility.Visible
             CurrMillCmBx.Visibility = Windows.Visibility.Visible
          Case 3
+            CreateToolList(MCH_TF.MILL, MCH_TY.MILL_NOTIP, m_CupWheelList)
+            m_CupWheelList.Add(NO_TOOL)
+            If m_CurrentMachine.sCurrMillNoTip = String.Empty Then
+               CurrCupWheelCmBx.SelectedItem = NO_TOOL
+            Else
+               CurrCupWheelCmBx.SelectedItem = m_CurrentMachine.sCurrMillNoTip
+            End If
+            m_CurrentMachine.sCurrDrill = String.Empty
+            m_CurrentMachine.sCurrDrilling = String.Empty
+            m_CurrentMachine.sCurrMill = String.Empty
+            m_CurrentMachine.sCurrMilling = String.Empty
+            m_CurrentMachine.sCurrWaterJet = String.Empty
+            m_CurrentMachine.sCurrWaterJetting = String.Empty
+            CurrCupWheelTxBl.Visibility = Windows.Visibility.Visible
+            CurrCupWheelCmBx.Visibility = Windows.Visibility.Visible
+         Case 4
             CreateToolList(MCH_TF.WATERJET, m_WaterJetList)
             m_WaterJetList.Add(NO_TOOL)
             If m_CurrentMachine.sCurrWaterJet = String.Empty Then
@@ -420,12 +536,21 @@ Public Class AlarmsPageUC
                CurrWJetCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJet
             End If
             m_CurrentMachine.sCurrDrill = String.Empty
+            m_CurrentMachine.sCurrDrilling = String.Empty
             m_CurrentMachine.sCurrMill = String.Empty
+            m_CurrentMachine.sCurrMilling = String.Empty
+            m_CurrentMachine.sCurrMillNoTip = String.Empty
+            m_CurrentMachine.sCurrPocketing = String.Empty
             CurrWJetTxBl.Visibility = Windows.Visibility.Visible
             CurrWJetCmBx.Visibility = Windows.Visibility.Visible
       End Select
+      ' aggionro l'elenco delle lavoarzioni
+      RefreschMachining()
+
    End Sub
 
+#Region "Selection: SAW, DRILL, MILL, CUPWHEEL, WATERJET"
+   ' -- SAW --
    Private Sub CurrSawCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrSawCmBx.SelectionChanged
       If IsNothing(CurrSawCmBx.SelectedItem) Then Return
       ' Assegno
@@ -441,21 +566,26 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
+   ' -- DRILL --
    Private Sub CurrDrillCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrDrillCmBx.SelectionChanged
       If IsNothing(CurrDrillCmBx.SelectedItem) Then Return
       ' Rimuovo foretto
       If CurrDrillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrDrill = String.Empty
          m_CurrentMachine.sCurrDrilling = String.Empty
-      ' Assegno foretto
+         ' Assegno foretto
       Else
          m_CurrentMachine.sCurrDrill = CurrDrillCmBx.SelectedItem.ToString()
          ' Reset fresa, waterjet e relative lavorazioni
          If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
             m_CurrentMachine.sCurrMill = String.Empty
             m_CurrentMachine.sCurrMilling = String.Empty
+            m_CurrentMachine.sCurrMillNoTip = String.Empty
+            m_CurrentMachine.sCurrPocketing = String.Empty
             m_CurrentMachine.sCurrWaterJet = String.Empty
             m_CurrentMachine.sCurrWaterJetting = String.Empty
          End If
@@ -471,21 +601,26 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
+   ' -- MILL --
    Private Sub CurrMillCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrMillCmBx.SelectionChanged
       If IsNothing(CurrMillCmBx.SelectedItem) Then Return
       ' Rimuovo fresa
       If CurrMillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrMill = String.Empty
          m_CurrentMachine.sCurrMilling = String.Empty
-      ' Assegno fresa
+         ' Assegno fresa
       Else
          m_CurrentMachine.sCurrMill = CurrMillCmBx.SelectedItem.ToString()
          ' Reset foretto, waterjet e relative lavorazioni
          If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
             m_CurrentMachine.sCurrDrill = String.Empty
             m_CurrentMachine.sCurrDrilling = String.Empty
+            m_CurrentMachine.sCurrMillNoTip = String.Empty
+            m_CurrentMachine.sCurrPocketing = String.Empty
             m_CurrentMachine.sCurrWaterJet = String.Empty
             m_CurrentMachine.sCurrWaterJetting = String.Empty
          End If
@@ -501,15 +636,53 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
+   ' -- CUPWHEEL --
+   Private Sub CurrCupWheelCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrCupWheelCmBx.SelectionChanged
+      If IsNothing(CurrCupWheelCmBx.SelectedItem) Then Return
+      ' Rimuovo fresa
+      If CurrCupWheelCmBx.SelectedItem.ToString() = NO_TOOL Then
+         m_CurrentMachine.sCurrMillNoTip = String.Empty
+         m_CurrentMachine.sCurrPocketing = String.Empty
+         ' Assegno fresa
+      Else
+         m_CurrentMachine.sCurrMillNoTip = CurrCupWheelCmBx.SelectedItem.ToString()
+         ' Reset foretto, waterjet e relative lavorazioni
+         If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
+            m_CurrentMachine.sCurrDrill = String.Empty
+            m_CurrentMachine.sCurrDrilling = String.Empty
+            m_CurrentMachine.sCurrMill = String.Empty
+            m_CurrentMachine.sCurrMilling = String.Empty
+            m_CurrentMachine.sCurrWaterJet = String.Empty
+            m_CurrentMachine.sCurrWaterJetting = String.Empty
+         End If
+         ' Se nuova fresa incompatibile con fresatura corrente, resetto quest'ultima
+         Dim sMchTuuid As String = String.Empty
+         Dim sMchTool As String = String.Empty
+         If Not EgtMdbSetCurrMachining(m_CurrentMachine.sCurrPocketing) Or
+            Not EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sMchTuuid) Or
+            Not EgtTdbGetToolFromUUID(sMchTuuid, sMchTool) Or
+            String.Compare(sMchTool, m_CurrentMachine.sCurrMillNoTip, True) <> 0 Then
+            m_CurrentMachine.sCurrPocketing = String.Empty
+         End If
+      End If
+      ' Aggiorno utensili per lavoro in corso
+      m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
+   End Sub
+
+   ' -- WATERJET --
    Private Sub CurrWJetCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrWJetCmBx.SelectionChanged
       If IsNothing(CurrWJetCmBx.SelectedItem) Then Return
       ' Rimuovo Waterjet
       If CurrWJetCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrWaterJet = String.Empty
          m_CurrentMachine.sCurrWaterJetting = String.Empty
-      ' Assegno Waterjet
+         ' Assegno Waterjet
       Else
          m_CurrentMachine.sCurrWaterJet = CurrWJetCmBx.SelectedItem.ToString()
          ' Reset foretto, fresa e relative lavorazioni
@@ -531,9 +704,13 @@ Public Class AlarmsPageUC
       End If
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
    End Sub
 
-   Private Overloads Sub CreateToolList(ToolType As Integer, ToolList As ObservableCollection(Of String))
+#End Region    'Selection: SAW, DRILL, MILL, CUPWHEEL, WATERJET
+
+   Public Overloads Sub CreateToolList(ToolType As Integer, ToolList As ObservableCollection(Of String))
       ToolList.Clear()
       Dim ToolName As String = String.Empty
       Dim nType As Integer = MCH_TY.NONE
@@ -548,6 +725,24 @@ Public Class AlarmsPageUC
       End While
    End Sub
 
+   ' definisce l'elenco degli utensili in funzione della famiglia e del tipo (usata per distingure i diversi tipi di frese)
+   Public Overloads Sub CreateToolList(ToolFamily As Integer, ToolType As Integer, ToolList As ObservableCollection(Of String))
+      ToolList.Clear()
+      Dim ToolName As String = String.Empty
+      Dim nType As Integer = ToolType
+      Dim bFound As Boolean = EgtTdbGetFirstTool(ToolType, ToolName, nType)
+      While bFound
+         ' Accetto utensili che non siano da sotto
+         If String.Compare(ToolName, m_CurrentMachine.sCurrDripSaw, True) <> 0 AndAlso
+            String.Compare(ToolName, m_CurrentMachine.sCurrDripDrill, True) <> 0 AndAlso
+            nType = ToolType Then
+            ToolList.Add(ToolName)
+         End If
+         bFound = EgtTdbGetNextTool(ToolType, ToolName, nType)
+      End While
+
+   End Sub
+
    Private Sub SetUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles SetUpBtn.Click
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Remove(Me)
       m_SetUpPage = New SetUpPage
@@ -621,6 +816,14 @@ Public Class AlarmsPageUC
       EgtMdbSave()
    End Sub
 
+   Private Sub PreCutExitChBx_Click(sender As Object, e As RoutedEventArgs) Handles PreCutExitChBx.Click
+      If PreCutExitChBx.IsChecked Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
    Private Sub CompleteCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles CompleteCutsChBx.Click
       Dim NestPage As NestPageUC = m_MainWindow.m_CadCutPageUC.m_NestPage
       If CompleteCutsChBx.IsChecked() Then
@@ -643,7 +846,7 @@ Public Class AlarmsPageUC
       Else
          WritePrivateProfileString(S_MACH_NEST, K_MACH_REDUCEDCUT, "1", m_MainWindow.GetMachIniFile())
       End If
-      AdjustAlignTextOnAutomaticOrCompleteCuts()
+      AdjustGhigliottinaTextOnAutomaticOrCompleteCuts()
    End Sub
 
    Private Sub CornerCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles CornerCutsChBx.Click
@@ -682,7 +885,7 @@ Public Class AlarmsPageUC
       Else
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "0", m_MainWindow.GetMachIniFile())
       End If
-   End Sub 
+   End Sub
 
    Private Sub TmDepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles TmDepthTxBx.EgtClosed
       Dim dVal As Double = 0
@@ -712,20 +915,30 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
-   Private Sub AutomaticChBx_Click(sender As Object, e As RoutedEventArgs) Handles AutomaticChBx.Click
-      If AutomaticChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_NEST_AUTOMATIC, "1", m_MainWindow.GetMachIniFile())
+   Private Sub GligliottinaChBx_Click(sender As Object, e As RoutedEventArgs) Handles GhigliottinaChBx.Click
+      If GhigliottinaChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_NEST_GHIGLIOTTINA, "1", m_MainWindow.GetMachIniFile())
       Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_NEST_AUTOMATIC, "0", m_MainWindow.GetMachIniFile())
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_NEST_GHIGLIOTTINA, "0", m_MainWindow.GetMachIniFile())
       End If
-      AdjustAlignTextOnAutomaticOrCompleteCuts()
    End Sub
 
-   Private Sub AdjustAlignTextOnAutomaticOrCompleteCuts()
-      If AutomaticChBx.IsChecked() And Not CompleteCutsChBx.IsChecked() Then
-         AlignTxBl.Text = EgtMsg( 91060)         ' Allineato e Ghigliottina
+   Private Sub AutomaticChBx_Click(sender As Object, e As RoutedEventArgs) Handles AutomaticChBx.Click
+      If AutomaticChBx.IsChecked() Then
+         WritePrivateProfileString(S_NEST, K_AUTOMATICOPTIMIZE, "1", m_MainWindow.GetIniFile())
       Else
-         AlignTxBl.Text = EgtMsg( 90932)         ' Allineato
+         WritePrivateProfileString(S_NEST, K_AUTOMATICOPTIMIZE, "0", m_MainWindow.GetIniFile())
+      End If
+      AdjustGhigliottinaTextOnAutomaticOrCompleteCuts()
+   End Sub
+
+   Private Sub AdjustGhigliottinaTextOnAutomaticOrCompleteCuts()
+      If AutomaticChBx.IsChecked() And Not CompleteCutsChBx.IsChecked() Then
+         GhigliottinaTxBl.Visibility = Visibility.Visible
+         GhigliottinaChBx.Visibility = Visibility.Visible
+      Else
+         GhigliottinaTxBl.Visibility = Visibility.Collapsed
+         GhigliottinaChBx.Visibility = Visibility.Collapsed
       End If
    End Sub
 
@@ -747,7 +960,7 @@ Public Class AlarmsPageUC
       If Not String.IsNullOrWhiteSpace(MatNameTxBx.Text) Then
          ' Verifico che il nome non sia già utilizzato
          Dim bNameExist As Boolean = False
-         For Each Material In m_CurrentMachine.Materials
+         For Each Material As Material In m_CurrentMachine.Materials
             If Material.sName = MatNameTxBx.Text Then
                bNameExist = True
                Exit For
@@ -808,6 +1021,14 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   Private Sub UseLaserOriginChBx_Click() Handles UseLaserOriginChBx.Click
+      If UseLaserOriginChBx.IsChecked() Then
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
    Private Sub WashingChBx_Click(sender As Object, e As RoutedEventArgs) Handles WashingChBx.Click
       If WashingChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_WASHING, "1", m_MainWindow.GetMachIniFile())
@@ -832,7 +1053,23 @@ Public Class AlarmsPageUC
       m_CurrentMachine.dFsevPerc = dVal
    End Sub
 
+   Private Sub FramePauseChBx_Click(sender As Object, e As RoutedEventArgs) Handles FramePauseChBx.Click
+      If FramePauseChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_FRAME, K_MACH_PAUSE, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_FRAME, K_MACH_PAUSE, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
    Private Sub SawProbingBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawProbingBtn.Click
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
       ' Recupero utensile da tastare
@@ -905,7 +1142,7 @@ Public Class AlarmsPageUC
       m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
       ' Definisco flag tastatura
       Dim bProbingOk As Boolean = False
-      For I = 0 To 120
+      For I As Integer = 0 To 120
          ' Devo rileggere la variabile ad ogni ciclo
          m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(ProbingStateNameVar, 3)
          System.Threading.Thread.Sleep(100)
@@ -947,7 +1184,7 @@ Public Class AlarmsPageUC
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
-         For I = 0 To 20
+         For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
             m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(SawDiameterNameVar, 3)
             System.Threading.Thread.Sleep(100)

Machine/ChooseToolWD.xaml

@@ -3,9 +3,11 @@
     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
     xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
     FontFamily="{DynamicResource OmagCut_Font}"
-    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
 
-   <Border Style="{DynamicResource OmagCut_Border}">
+    <Border Style="{DynamicResource OmagCut_Border}">
       <Grid>
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="0.5*"/>

Machine/ChooseToolWD.xaml.vb

@@ -53,7 +53,7 @@ Public Class ChooseToolWD
                m_SetUpToolList.Add(New ToolPos(m_MainWindow.m_CurrentMachine.sCurrSaw, sToolPos, True))
             End If
             ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
-            For Each ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
                m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
             Next
             Return True
@@ -65,12 +65,12 @@ Public Class ChooseToolWD
                EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos)
                m_SetUpToolList.Add(New ToolPos(m_MainWindow.m_CurrentMachine.sCurrSaw, sToolPos, True))
             End If
-            For Each ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
                If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
                   m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
                End If
             Next
-            For Each ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
                If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
                   m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
                End If

Machine/CurrentMachine.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports EgtWPFLib5
 Imports EgtUILib
 
 Public Class CurrentMachine
@@ -24,7 +25,13 @@ Public Class CurrentMachine
    ' Ritardo tra reset e invio programma per NUM
    Private m_nResetSendDelay As Integer = 1000
 
+   ' tempo di arresto sospensione dei Thread prima dopo aver lanciato il comando CN
+   Private m_nThreadSleep As Integer = 150
+
    ' Dati su linea di produzione
+   Private m_bDemo As Boolean = False
+   Public nLastProjSentToViewDEMO As Integer = 0
+
    Private m_bProdLine As Boolean = False
    Private m_sVarProg1 As String = "E80021"
    Private m_nProg1 As Integer = 901
@@ -108,6 +115,7 @@ Public Class CurrentMachine
    Private m_sCurrDripSawing As String = String.Empty
    Private m_sCurrDripDrilling As String = String.Empty
    Private m_sCurrWaterJetting As String = String.Empty
+   Private m_sCurrWaterJettingQuality As String = String.Empty
 
    ' Spessore sottopezzo
    Private m_dAdditionalTable As Double = 0
@@ -151,6 +159,9 @@ Public Class CurrentMachine
    ' Lista dei materiali
    Private m_Materials As New ObservableCollection(Of Material)
 
+   ' Lista delle qualità di lavorazioni disponibili nel WaterJet
+   Private m_Qualities As New ObservableCollection(Of String)
+
    ' Massimo id della lista materiali nel file ini
    Private m_MaxIdMat As Integer = 0
 
@@ -216,6 +227,18 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property nThreadSleep As Integer
+      Get
+         Return m_nThreadSleep
+      End Get
+   End Property
+
+   Friend ReadOnly Property bDemo As Boolean
+      Get
+         Return m_bDemo
+      End Get
+   End Property
+
    Friend ReadOnly Property bProdLine As Boolean
       Get
          Return m_bProdLine
@@ -691,6 +714,17 @@ Public Class CurrentMachine
       End Set
    End Property
 
+   Friend Property sCurrWaterJettingQuality As String
+      Get
+         Return m_sCurrWaterJettingQuality
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, value, sMachIniFile) Then
+            m_sCurrWaterJettingQuality = value
+         End If
+      End Set
+   End Property
+
    Friend ReadOnly Property WaterJettingActive As Double
       Get
          Return m_bWaterJetting AndAlso Not String.IsNullOrWhiteSpace(m_sCurrWaterJetting)
@@ -885,8 +919,14 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property Qualities As ObservableCollection(Of String)
+      Get
+         Return m_Qualities
+      End Get
+   End Property
+
    Friend Sub AddMaterial(value As Material)
-      For Each Material In Materials
+      For Each Material As Material In Materials
          If Material.nId = value.nId Then
             Exit Sub
          End If
@@ -910,7 +950,7 @@ Public Class CurrentMachine
          End If
       Next
       Dim TempMat As Material = Nothing
-      For I = Index To m_MaxIdMat - 1
+      For I As Integer = Index To m_MaxIdMat - 1
          GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & I + 2, TempMat, sMachIniFile)
          WritePrivateProfileMaterial(S_MATERIALS, K_MATERIAL & I + 1, TempMat, sMachIniFile)
       Next
@@ -946,7 +986,7 @@ Public Class CurrentMachine
       If SysNotes <> String.Empty Then
          Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
          SysNotes = String.Empty
-         For Each Material In MachiningMaterials
+         For Each Material As Object In MachiningMaterials
             Dim Param() As String = Material.Split(",".ToCharArray)
             If Param(0) <> valueId.ToString Then
                SysNotes &= Material & ";"
@@ -966,7 +1006,11 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         If bWaterJet Then
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
+         Else
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         End If
          m_CurrMat = value
       End Set
    End Property
@@ -975,7 +1019,7 @@ Public Class CurrentMachine
       ' Se stringa vuota
       If String.IsNullOrWhiteSpace(sMatName) Then Return False
       ' Cerco il nome nella lista dei materiali
-      For Index = 0 To Materials.Count - 1
+      For Index As Integer = 0 To Materials.Count - 1
          If String.Compare(Materials(Index).sName, sMatName, True) = 0 Then
             CurrMat = Materials(Index)
          End If
@@ -1017,12 +1061,15 @@ Public Class CurrentMachine
       m_dDeltaC = GetPrivateProfileDouble(S_AXES, K_DELTA_C, 0.0, sMachIniFile)
       ' Leggo ritardo tra reset e send per NUM
       m_nResetSendDelay = GetPrivateProfileInt(S_NCNUM, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCNUM, K_THREADSLEEP, 150, sMachIniFile)
       ' Leggo se linea di produzione e parametri relativi
       m_bProdLine = (GetPrivateProfileInt(S_PRODUCTIONLINE, K_ACTIVE, 0, sMachIniFile) <> 0)
       If m_bProdLine And Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.PRODUCTION_LINE) Then
          m_bProdLine = False
          EgtOutLog("Error - Production line requested but not key enabled")
       End If
+      m_bDemo = (GetPrivateProfileInt(S_PRODUCTIONLINE, "Demo", 0, sMachIniFile) <> 0)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG1, "", m_sVarProg1, sMachIniFile)
       m_nProg1 = GetPrivateProfileInt(S_PRODUCTIONLINE, K_NAMEPROG1, 0, m_MainWindow.GetMachIniFile())
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG2, "", m_sVarProg2, sMachIniFile)
@@ -1136,6 +1183,8 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRIPDRILLING, Nothing, m_sCurrDripDrilling, sMachIniFile)
       ' waterjetting
       GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, Nothing, m_sCurrWaterJetting, sMachIniFile)
+      ' waterjettingquality
+      GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, Nothing, m_sCurrWaterJettingQuality, sMachIniFile)
 
       ' Leggo numero di portautensili
       m_ToolChangerNbr = GetPrivateProfileInt(S_TOOLCHANGER, K_NUMBER, 0, sMachIniFile)
@@ -1155,7 +1204,7 @@ Public Class CurrentMachine
       m_ManualToolChangerNbr = Math.Min(m_ManualToolChangerNbr, MAX_TCMAN_TOOLS)
 
       ' Leggo da file ini nomi e utensili manuali presenti
-      For Index = 1 To m_ManualToolChangerNbr
+      For Index As Integer = 1 To m_ManualToolChangerNbr
          Dim sName As String = String.Empty
          Dim sTool As String = String.Empty
          GetPrivateProfileString(S_TOOLCHANGER, K_MANUALNAME & Index, Nothing, sName, sMachIniFile)
@@ -1197,27 +1246,120 @@ Public Class CurrentMachine
       ' Leggo la lista dei materiali
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
-      While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
-         m_Materials.Add(Material)
-         nIndex += 1
-      End While
+
+      If m_bWaterJet Then
+         LoadWJMaterial(True)
+      Else
+         While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
+            m_Materials.Add(Material)
+            nIndex += 1
+         End While
+      End If
+
       ' Salvo massimo indice a cui sono arrivato per usarlo quando devo aggiungere nuovi elementi alla lista
       m_MaxIdMat = nIndex - 1
 
       ' Leggo materiale correntemente attivo
-      Dim CurrMatId As Integer = GetPrivateProfileInt(S_MATERIALS, K_CURRMATERIAL, 0, sMachIniFile)
-      For Each Material In Materials
-         If Material.nId = CurrMatId Then
-            m_CurrMat = Material
-            Exit For
+      Dim sCurrMatId As String = String.Empty
+      EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
+      If bWaterJet Then
+         Dim sCurrMatIds As String()
+         sCurrMatIds = sCurrMatId.Split("."c)
+         If sCurrMatIds.Length > 1 Then
+            Dim nCurrMatId As Integer
+            Dim nCurrSubMatId As Integer
+            If Not Integer.TryParse(sCurrMatIds(0), nCurrMatId) Then nCurrMatId = 0
+            If Not Integer.TryParse(sCurrMatIds(1), nCurrSubMatId) Then nCurrSubMatId = 0
+            For Each Material In Materials
+               If Material.nId = nCurrMatId AndAlso Material.SubId = nCurrSubMatId Then
+                  m_CurrMat = Material
+                  Exit For
+               End If
+            Next
          End If
-      Next
+      Else
+         Dim nCurrMatId As Integer
+         If Not Integer.TryParse(sCurrMatId, nCurrMatId) Then nCurrMatId = 0
+         For Each Material In Materials
+            If Material.nId = nCurrMatId Then
+               m_CurrMat = Material
+               Exit For
+            End If
+         Next
+      End If
       ' leggo se la macchina ha il tastatore dello spessore tavola
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
+      Dim TempCurrMat As Material = CurrMat
+      ' Svuoto l'attuale lista di materiali
+      m_Materials.Clear()
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      ' definisco la lista delle qualità (solo se è vuota)
+      If m_Qualities.Count < 1 Then
+         m_Qualities.Add("")
+         m_Qualities.Add("Q1")
+         m_Qualities.Add("Q2")
+         m_Qualities.Add("Q3")
+         m_Qualities.Add("Q4")
+         m_Qualities.Add("Q5")
+         m_Qualities.Add("QExtra")
+      End If
+      ' inserisco il materiale generico di default -- IN SOSPESO
+      'm_Materials.Add(New Material(0, "***", 0))
+      ' costruiscoi la lista 
+      Dim i As Integer = 0
+      Dim sName As String = String.Empty
+      For i = 0 To Local_MaterialList.Count - 1
+         sName = Local_MaterialList(i).Name
+         Dim j As Integer = 0
+         For j = 0 To Local_MaterialList(i).SubMaterialList.Count - 1
+            m_Materials.Add(New Material(i + 1, sName & "." & Local_MaterialList(i).SubMaterialList(j).Name, j + 1))
+         Next
+      Next
+      If Not bIsStart Then CurrMat = TempCurrMat
+   End Sub
+
+   Public Function GetMaxThicknessCurrMaterial(sCurMat As String) As Double
+      Dim bFound As Boolean = False
+      Dim dMaxThick As Double = 0
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Dim sItems() As String = sCurMat.Split("."c)
+      If sItems.Count > 1 Then
+         Dim sMat As String = sItems(0)
+         Dim sSubMat As String = sItems(1)
+         For Each ItemMat As EgtWPFLib5.WjMaterial In Local_MaterialList
+            If ItemMat.Name = sMat Then
+               For Each ItemSubMat As EgtWPFLib5.WjSubMaterial In ItemMat.SubMaterialList
+                  If ItemSubMat.Name = sSubMat Then
+                     For Each ItemParam As EgtWPFLib5.WjParam In ItemSubMat.ParamList
+                        Dim dParamThick As Double
+                        StringToDouble(ItemParam.Thickness, dParamThick)
+                        If dParamThick > dMaxThick Then
+                           dMaxThick = dParamThick
+                        End If
+                     Next
+                     bFound = True
+                     Exit For
+                  End If
+                  If bFound Then Exit For
+               Next
+            End If
+            If bFound Then Exit For
+         Next
+      End If
+      Return dMaxThick
+   End Function
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)
@@ -1312,6 +1454,7 @@ Friend Class Material
 
    Private m_nId As Integer
    Private m_sName As String
+   Private m_SubId As Integer = 0
 
    Public ReadOnly Property nId As Integer
       Get
@@ -1328,9 +1471,18 @@ Friend Class Material
       End Set
    End Property
 
+   Public Property SubId As Integer
+      Get
+         Return m_SubId
+      End Get
+      Set(value As Integer)
+         m_SubId = value
+      End Set
+   End Property
+
    Sub New(sName As String, MaterialList As ObservableCollection(Of Material))
       Dim nMaxId As Integer = 0
-      For Each Material In MaterialList
+      For Each Material As Material In MaterialList
          If Material.nId > nMaxId Then
             nMaxId = Material.nId
          End If
@@ -1344,4 +1496,11 @@ Friend Class Material
       m_sName = sName
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_sName = sName
+      m_SubId = nSubId
+   End Sub
+
 End Class
+

Machine/ImportExportMachiningWindowWD.xaml

@@ -0,0 +1,139 @@
+<Window  x:Class="ImportExportMachiningWindowWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+            
+            <ScrollViewer Grid.Row="0"  Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningFamily}" ItemsSource="{Binding MachiningList}">
+            
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+            
+                            </Grid>
+            
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                           <MultiTrigger.Conditions>
+                                              <Condition Property="IsSelected" Value="true"/>
+                                              <Condition Property="IsSelectionActive" Value="false"/>
+                                           </MultiTrigger.Conditions>
+                                           <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                           <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                        </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+            
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                                       RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"   />
+            
+                            </Grid>
+                        </DataTemplate>
+            
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+            
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+            
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            Command="{Binding OkCommand}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+    </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportMachiningWindowWD.xaml.vb

@@ -0,0 +1,33 @@
+Imports EgtWPFLib5
+Public Class ImportExportMachiningWindowWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportMachiningWindowVM As ImportExportMachiningWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportMachiningWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportMachiningWindowVM = ImportExportToolWindowVM
+   End Sub
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/ImportExportToolWD.xaml

@@ -0,0 +1,138 @@
+<Window x:Class="ImportExportToolWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+
+            <ScrollViewer Grid.Row="0" Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolFamily}" ItemsSource="{Binding ToolList}">
+
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+
+                            </Grid>
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                       <MultiTrigger.Conditions>
+                                          <Condition Property="IsSelected" Value="true"/>
+                                          <Condition Property="IsSelectionActive" Value="false"/>
+                                       </MultiTrigger.Conditions>
+                                       <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                       <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                    </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                          RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"  />
+
+                            </Grid>
+                        </DataTemplate>
+
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        Command="{Binding OkCommand}">
+                <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+                
+        </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportToolWD.xaml.vb

@@ -0,0 +1,38 @@
+Imports EgtWPFLib5
+Public Class ImportExportToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportToolWindowVM As ImportExportToolWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportToolWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportToolWindowVM = ImportExportToolWindowVM
+   End Sub
+
+   'Private Sub CloseWindow(bDialogResult As Boolean) Handles m_ImportExportToolWindowVM.m_CloseWindow
+   '   Me.DialogResult = bDialogResult
+   'End Sub
+
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/MachineCNPageUC.xaml

@@ -115,11 +115,13 @@
                         <ColumnDefinition Width="2*"/>
                     </Grid.ColumnDefinitions>
                     <!--PowerON-->
-                    <Button Name="PowerONBtn" Grid.Column="0"
-                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+                    <ToggleButton Name="PowerONBtn" Grid.Column="0"
+                                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                                  Foreground="White"/>
                     <!--PowerOFF-->
-                    <Button Name="PowerOFFBtn" Grid.Column="1"
-                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+                    <ToggleButton Name="PowerOFFBtn" Grid.Column="1"
+                                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                                  Foreground="White"/>
                 </Grid>
             </GroupBox>
 

Machine/MachineCNPageUC.xaml.vb

@@ -56,6 +56,12 @@ Public Class MachineCNPageUC
       m_ButtonPower.Clear()
       Dim m_nCount As Integer = 1
       Dim bFoundBtn As Boolean = True
+      Dim sTestVal As String = String.Empty
+      ' se non trovo il primo pulsante della lista allora nascondo l'elenco dei pulasnti per accensione
+      If GetPrivateProfileString("MachineButtons", K_BUTTON & "1", "", sTestVal, m_MainWindow.GetMachIniFile()) = 0 Then
+         PowerGpBx.Visibility = Visibility.Collapsed
+         Return
+      End If
       While bFoundBtn
          Dim sNameBtn As String = K_BUTTON & (m_nCount).ToString()
          Dim sMachineButtonType As String = String.Empty
@@ -245,15 +251,31 @@ Public Class MachineCNPageUC
    Friend Sub PowerONChanged(bPowerON As Boolean)
       ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
       Dim PowerONButton As TwoStateButton = Nothing
-      For Each MachineButton In m_ButtonPower
-         If MachineButton.StateFlag = "ZAxes" Then
+      For Each MachineButton As MachineButton In m_ButtonPower
+         If MachineButton.StateFlag.Trim = K_POWERON Then
             PowerONButton = MachineButton
+            Exit For
          End If
       Next
-      'If Not IsNothing(PowerONButton) Then
-      '   PowerONButton.SetIsChecked(bZAxes)
-      '   PowerONBtn.IsChecked = bZAxes
-      'End If
+      If Not IsNothing(PowerONButton) Then
+         PowerONButton.SetIsChecked(bPowerON)
+         PowerONBtn.IsChecked = bPowerON
+      End If
+   End Sub
+
+   Friend Sub PowerOFFChanged(bPowerOFF As Boolean)
+      ' leggo solo una varibile -> quindi quando modifico lo stato di PowerON devo modificare lo stato di PowerOFF
+      Dim PowerOFFButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonPower
+         If MachineButton.StateFlag.Trim = K_POWEROFF Then
+            PowerOFFButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(PowerOFFButton) Then
+         PowerOFFButton.SetIsChecked(bPowerOFF)
+         PowerOFFBtn.IsChecked = bPowerOFF
+      End If
    End Sub
 
 End Class

Machine/MachinePageUC.xaml

@@ -24,17 +24,33 @@
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ToolsDBBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="TestingPageBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="StatisticsBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ToolsDBBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DB-lavorazioniImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource DB-utensiliImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="WaterJetBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource WaterJetImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="TestingPageBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource MacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="StatisticsBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowToggleButton}">
+                    
+                </ToggleButton>
 
             </Grid>
 

Machine/MachinePageUC.xaml.vb

@@ -10,6 +10,7 @@ Public Class MachinePageUC
    Friend m_ToolsDbPageUC As ToolsDbPageUC
    Friend m_MachiningDbPageUC As MachiningDbPageUC
    Friend m_PolishingsPageUC As PolishingsPageUC
+   Friend m_WaterJetPageUC As WaterJetPageUC
    Friend m_MachineCNPageUC As MachineCNPageUC
    Friend m_StatisticsPageUC As StatisticsPageUC
 
@@ -21,6 +22,7 @@ Public Class MachinePageUC
       ToolsDb
       MachiningDb
       Polishings
+      WaterJet
       MachineCN
       Statistics
    End Enum
@@ -32,6 +34,7 @@ Public Class MachinePageUC
       m_ToolsDbPageUC = New ToolsDbPageUC
       m_MachiningDbPageUC = New MachiningDbPageUC
       m_PolishingsPageUC = New PolishingsPageUC
+      m_WaterJetPageUC = New WaterJetPageUC
       m_MachineCNPageUC = New MachineCNPageUC
       m_StatisticsPageUC = New StatisticsPageUC
 
@@ -40,14 +43,16 @@ Public Class MachinePageUC
       m_ToolsDbPageUC.SetValue(Grid.RowProperty, 1)
       m_MachiningDbPageUC.SetValue(Grid.RowProperty, 1)
       m_PolishingsPageUC.SetValue(Grid.RowProperty, 1)
+      m_WaterJetPageUC.SetValue(Grid.RowProperty, 1)
       m_MachineCNPageUC.SetValue(Grid.RowProperty, 1)
       m_StatisticsPageUC.SetValue(Grid.RowProperty, 1)
 
-      AlarmsBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 5)
-      ToolsDBBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 6)
-      MachiningDBBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 7)
+      AlarmsBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 5)
+      ToolsDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 6)
+      MachiningDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 7)
       PolishingsBtn.Content = EgtMsg(91090)
-      TestingPageBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 8)
+      WaterJetBtn.Content = EgtMsg(91128)
+      TestingPageBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 8)
       StatisticsBtn.Content = EgtMsg(90709)
 
       ' Apro pagina dati macchina
@@ -55,10 +60,14 @@ Public Class MachinePageUC
       m_ActiveMachinePage = MachinePages.Alarms
 
       ' Se lucidature non abilitate, disattivo la pagina DB lucidature
-      If Not m_MainWindow.m_CurrentMachine.bPolishing  Then
+      If Not m_MainWindow.m_CurrentMachine.bPolishing Then
          PolishingsBtn.IsEnabled = False
       End If
 
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Then
+         WaterJetBtn.IsEnabled = False
+      End If
+
       ' Se controllo numerico 0, disattivo la pagina macchina
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          TestingPageBtn.IsEnabled = False
@@ -134,6 +143,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               AlarmsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -188,6 +213,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_ToolsDbPageUC)
             m_ActiveMachinePage = MachinePages.ToolsDb
+         Case MachinePages.WaterJet
+            'Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               ToolsDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            ToolsDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_ToolsDbPageUC)
+            m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.MachineCN
             ToolsDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -242,6 +283,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
             m_ActiveMachinePage = MachinePages.MachiningDb
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               MachiningDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            MachiningDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -299,6 +356,22 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.Polishings
             PolishingsBtn.IsChecked = True
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               PolishingsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            PolishingsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_PolishingsPageUC)
+            m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.MachineCN
             PolishingsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -314,6 +387,77 @@ Public Class MachinePageUC
       End Select
    End Sub
 
+   Private Sub WaterJetBtn_Click(sender As Object, e As RoutedEventArgs) Handles WaterJetBtn.Click
+      Select Case m_ActiveMachinePage
+         Case MachinePages.Alarms
+            AlarmsBtn.IsChecked = False
+            WaterJetBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_AlarmsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+            'DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM).RefreshDImensionPage()
+         Case MachinePages.ToolsDb
+            ' Verifica ed eventuale salvataggio utensile corrente
+            If Not m_ToolsDbPageUC.SaveCurrTool() Then
+               PolishingsBtn.IsChecked = False
+               ToolsDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB utensili
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtTdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            ToolsDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_ToolsDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.MachiningDb
+            ' Verifica ed eventuale salvataggio lavorazione corrente
+            If Not m_MachiningDbPageUC.SaveCurrMachining() Then
+               WaterJetBtn.IsChecked = False
+               MachiningDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB lavorazioni
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtMdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            MachiningDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachiningDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Polishings
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            If Not m_PolishingsPageUC.SaveKit() Then
+               WaterJetBtn.IsChecked = False
+               PolishingsBtn.IsChecked = True
+               Return
+            End If
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            PolishingsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_PolishingsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.WaterJet
+            WaterJetBtn.IsChecked = True
+         Case MachinePages.MachineCN
+            WaterJetBtn.IsChecked = True
+            TestingPageBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Statistics
+            WaterJetBtn.IsChecked = True
+            StatisticsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_StatisticsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+      End Select
+   End Sub
+
    Private Sub TestingPageBtn_Checked(sender As Object, e As RoutedEventArgs) Handles TestingPageBtn.Checked
       Select Case m_ActiveMachinePage
          Case MachinePages.Alarms
@@ -367,6 +511,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachineCNPageUC)
             m_ActiveMachinePage = MachinePages.MachineCN
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               TestingPageBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachineCNPageUC)
+            m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.MachineCN
             TestingPageBtn.IsChecked = True
          Case MachinePages.Statistics
@@ -431,6 +591,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_StatisticsPageUC)
             m_ActiveMachinePage = MachinePages.Statistics
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               StatisticsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_StatisticsPageUC)
+            m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.MachineCN
             StatisticsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -467,6 +643,19 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            'If Not m_PolishingsPageUC.SaveKit() Then
+            '   AlarmsBtn.IsChecked = False
+            '   PolishingsBtn.IsChecked = True
+            '   Return
+            'End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False

Machine/MachineStatusUC.xaml

@@ -146,7 +146,7 @@
 
          </Grid>
 
-         <Grid>
+         <Grid Name="B">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="2"/>
                <ColumnDefinition Width="1*"/>
@@ -423,8 +423,8 @@
 
                   <TextBlock Grid.Column="0" Name="ConsumptionNameTxBx" Text="A"
             Style="{StaticResource OmagCut_LowerBarTitleTextBlock}"/>
-                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25"
-            Style="{StaticResource OmagCut_LowerBarValueTextBlock}"/>
+                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25.00"
+            Style="{StaticResource OmagCut_LowerBarValueTextBlock}" FontSize="22"/>
 
                </Grid>
 

Machine/MachineStatusUC.xaml.vb

@@ -111,20 +111,26 @@ Public Class MachineStatusUC
          ' modifico uniformgrid
          AxisUniformGrid.Columns = 1
          AxisUniformGrid.Rows = m_AxesNumber + 2
-         For Index = 0 To 12 - 1
+         For Index As Integer = 0 To 12 - 1
             Dim HorizontalGrid As Grid = DirectCast(AxisUniformGrid.Children(Index), Grid)
             HorizontalGrid.ColumnDefinitions.Clear()
             HorizontalGrid.RowDefinitions.Clear()
             If Index < m_AxesNumber Then
                HorizontalGrid.Visibility = Windows.Visibility.Visible
             End If
+            If HorizontalGrid.Name = "B" And m_AxesNumber = 4 Then
+               ' se macchina a 4 assi allora nascondo le info dell'asse B
+               HorizontalGrid.Visibility = Windows.Visibility.Collapsed
+               Continue For
+            End If
             Dim BorderRow As New RowDefinition
             BorderRow.Height = New GridLength(2, GridUnitType.Pixel)
             HorizontalGrid.RowDefinitions.Add(BorderRow)
             Dim AxisGrid As New RowDefinition
             AxisGrid.Height = New GridLength(1, GridUnitType.Star)
             HorizontalGrid.RowDefinitions.Add(AxisGrid)
-            For Each Children In HorizontalGrid.Children
+
+            For Each Children As UIElement In HorizontalGrid.Children
                If TypeOf Children Is System.Windows.Controls.Primitives.UniformGrid Then
                   Dim AxisUniformGrid As System.Windows.Controls.Primitives.UniformGrid = DirectCast(Children, System.Windows.Controls.Primitives.UniformGrid)
                   AxisUniformGrid.SetValue(Grid.RowProperty, 1)

Machine/MachiningDbPageUC.xaml

@@ -392,7 +392,7 @@
 
             </Border>
 
-            <Border Name="CurveBrd" Grid.Column="0" Grid.Row="18" Grid.ColumnSpan="4" Grid.RowSpan="3"
+            <Border Name="CurveBrd" Grid.Column="0" Grid.Row="15" Grid.ColumnSpan="4" Grid.RowSpan="3"
                Style="{DynamicResource OmagCut_NoNameGroupBorder}">
 
                <Grid>
@@ -931,14 +931,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
                 <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
-
+                <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
+                <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
             </Grid>
 
       </Grid>

Machine/MachiningDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports System.ComponentModel
 Imports OmagCUT.TreeViewItem
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class MachiningDbPageUC
 
@@ -78,6 +79,8 @@ Public Class MachiningDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 16)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = "Export"
+      ImportBtn.Content = "Import"
 
       NameTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 1)
       DepthTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 2)
@@ -227,7 +230,7 @@ Public Class MachiningDbPageUC
    'Funzione che permette l'inizializzazione di albero e parametri all'apertura della pagina ToolsDb
    Private Sub InitializeFirstSelectedItem()
       If MachiningsList.Count > 0 Then
-         For Each MachiningFamily In MachiningsList
+         For Each MachiningFamily As CathegoryItem In MachiningsList
             If MachiningFamily.Items.Count > 0 Then
                MachiningFamily.IsExpanded = True
                MachiningFamily.Items(0).IsSelected = True
@@ -250,7 +253,7 @@ Public Class MachiningDbPageUC
          Dim NewName As String = SelectedCathegory.Name
          EgtMdbGetMachiningNewName(NewName)
          If EgtMdbAddMachining(NewName, SelectedCathegory.nTType) Then
-            For Each MachiningFamily In MachiningsList
+            For Each MachiningFamily As CathegoryItem In MachiningsList
                If MachiningFamily.nTType = SelectedCathegory.nTType Then
                   Dim NewMachiningItem As New CustomItem(NewName, SelectedCathegory.nTType)
                   MachiningFamily.Items.Add(NewMachiningItem)
@@ -270,7 +273,7 @@ Public Class MachiningDbPageUC
          If EgtMdbCopyMachining(SelectedCathegory.Name, NewName) Then
             Dim CurrType As Integer
             EgtMdbGetCurrMachiningParam(MCH_MP.TYPE, CurrType)
-            For Each MachiningFamily In MachiningsList
+            For Each MachiningFamily As CathegoryItem In MachiningsList
                If MachiningFamily.nTType = CurrType Then
                   Dim NewMachiningItem As New CustomItem(NewName, CurrType)
                   MachiningFamily.Items.Add(NewMachiningItem)
@@ -303,7 +306,7 @@ Public Class MachiningDbPageUC
          ' Cancello la lavorazione
          EgtMdbRemoveMachining(SelectedItem.Name)
          ' Rimuovo dall'albero
-         For Each MachiningFamily In MachiningsList
+         For Each MachiningFamily As CathegoryItem In MachiningsList
             If (MachiningFamily.nTType And SelectedItem.nType) <> 0 Then
                MachiningFamily.Items.Remove(SelectedItem)
                If MachiningFamily.Items.Count = 0 Then
@@ -321,6 +324,193 @@ Public Class MachiningDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista lavorazioni per esportazione
+      Dim MachiningToExportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      Dim Family As CathegoryItem
+      Dim Machining As CustomItem
+      For Each Family In MachiningsList
+         Dim ImpExpMachiningFamily As New ImpExpMachiningFamily(Family.Name, Family.nTType)
+         For Each Machining In Family.Items
+            ImpExpMachiningFamily.MachiningList.Add(New ImpExpMachiningItem(Machining.Name, False))
+         Next
+         MachiningToExportList.Add(ImpExpMachiningFamily)
+      Next
+      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList)
+      Dim ExportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImoportBtn_Click() Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Machinings (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileMachiningNameList As String() = Nothing
+      Dim ImportFileMachiningFamilyList As Integer() = Nothing
+      If Not EgtMdbToBeImported(ImportFilePath, ImportFileMachiningNameList, ImportFileMachiningFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim MachinigToImportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For MachiningIndex As Integer = 0 To ImportFileMachiningNameList.Count - 1
+         Dim MachiningName As String = ImportFileMachiningNameList(MachiningIndex)
+         Dim MachiningFamily As Integer = ImportFileMachiningFamilyList(MachiningIndex)
+         MachiningFamily = MachiningFamily And
+            (MCH_MY.DRILLING Or
+            MCH_MY.SAWING Or
+            MCH_MY.MILLING Or
+            MCH_MY.POCKETING Or
+            MCH_MY.MORTISING Or
+            MCH_MY.SAWROUGHING Or
+            MCH_MY.SAWFINISHING Or
+            MCH_MY.GENMACHINING Or
+            MCH_MY.CHISELING Or
+            MCH_MY.SURFROUGHING Or
+            MCH_MY.SURFFINISHING Or
+            MCH_MY.WATERJETTING)
+         Dim bFounded As Boolean = False
+         Dim MachinigToImportFamily As ImpExpMachiningFamily
+         For Each MachinigToImportFamily In MachinigToImportList
+            If (MachiningFamily = MachinigToImportFamily.FamilyType) Then
+               MachinigToImportFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpMachiningFamily(GetMachiningFamilyName(MachiningFamily), MachiningFamily)
+            NewFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+            MachinigToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, ImportFilePath, ImportFileMachiningNameList)
+      Dim ImportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineMachinings(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(MachiningName As String) As Boolean
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         Dim MachiningItem As CustomItem
+         For Each MachiningItem In MachiningFamily.Items
+            If MachiningName = MachiningItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetMachiningFamilyName(NewMachinigFamily As Integer) As String
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         If NewMachinigFamily = MachiningFamily.nTType Then
+            Return MachiningFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineMachinings(vsImportedMachinings As String())
+      ' Leggo tutte le lavorazioni presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveMachiningsFamilies() As MachiningsType = MyReadMachiningFamilies(m_MainWindow.m_CurrentMachine.sMachIniFile)
+      Dim MachiningsFamilyIndex As Integer = 0
+      Dim MachiningsFamilyItem As MachiningsType
+      For Each MachiningsFamilyItem In ActiveMachiningsFamilies
+         Dim FamilyTreeView As New CathegoryItem(MachiningsFamilyItem.Name, MachiningsFamilyItem.Id)
+         Dim MachiningFamilyItem = MachiningsList.FirstOrDefault(Function(MachiningFamily) MachiningsFamilyItem.Id = MachiningFamily.nTType)
+         If IsNothing(MachiningFamilyItem) Then
+            MachiningsList.Insert(MachiningsFamilyIndex, FamilyTreeView)
+         End If
+         Dim nType As Integer = 0
+         Dim MachiningName As String = String.Empty
+         Dim MachiningIndex As Integer = 0
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         Dim bFound As Boolean = EgtMdbGetFirstMachining(MachiningsFamilyItem.Id, MachiningName)
+         While bFound
+            Dim MachiningItem = MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName)
+            Dim bInList As Boolean = vsImportedMachinings.Contains(MachiningName)
+            If bInList Then
+               ' Se una lavorazione è presente nella MachiningsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stata sovrascritta perciò la rimuovo
+               MachiningsList(MachiningsFamilyIndex).Items.Remove(MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName))
+            End If
+            If bInList OrElse IsNothing(MachiningItem) Then
+               ' recupero tuuid
+               EgtMdbSetCurrMachining(MachiningName)
+               Dim sCurrMachTUUID As String = String.Empty
+               EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sCurrMachTUUID)
+               ' aggiungo la lavorazione importata
+               MachiningsList(MachiningsFamilyIndex).Items.Insert(MachiningIndex, New CustomItem(MachiningName, MachiningsFamilyItem.Id, ToolDbUtility.IsToolInDb(sCurrMachTUUID)))
+               ' eventualmente evidezio l'ultimo elemento inserito (ERRORE: non espando l'albero)
+               'MachiningsList(MachiningsFamilyIndex).Items(MachiningIndex).IsSelected = True
+            End If
+            MachiningIndex += 1
+            bFound = EgtMdbGetNextMachining(MachiningsFamilyItem.Id, MachiningName)
+         End While
+         MachiningsFamilyIndex += 1
+      Next
+   End Sub
+
+   Public Function MyReadMachiningFamilies(sMachineIniPath As String) As MachiningsType()
+      Dim ActiveMachiningsFamiliesList As New List(Of MachiningsType)
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Foratura e Taglio di lama nelle famiglie di lavorazioni attive è invertito 
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWING, .Name = EgtMsg(31200 + 2)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_DRILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.DRILLING, .Name = EgtMsg(31200 + 1)})
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MILLING, .Name = EgtMsg(31200 + 3)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_POCKETING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.POCKETING, .Name = EgtMsg(31200 + 4)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MORTISING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MORTISING, .Name = EgtMsg(31200 + 5)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWROUGHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWROUGHING, .Name = EgtMsg(31200 + 6)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWFINISHING, .Name = EgtMsg(31200 + 7)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_GENMACHINING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.GENMACHINING, .Name = EgtMsg(31200 + 8)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_CHISELING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.CHISELING, .Name = EgtMsg(31200 + 9)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SURFFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SURFFINISHING, .Name = EgtMsg(31211)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_WATERJETTING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.WATERJETTING, .Name = EgtMsg(31210)})
+      End If
+      Return ActiveMachiningsFamiliesList.ToArray
+   End Function
+
    Private Sub InitializeMachiningFamily(bEnabled As Boolean, nFType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
@@ -457,7 +647,7 @@ Public Class MachiningDbPageUC
          Case MCH_MY.MILLING       'Fresatura
             ToolCmBx.ItemsSource = MillTool
          Case MCH_MY.POCKETING     'Svuotatura
-            ToolCmBx.ItemsSource = MillTool
+            ToolCmBx.ItemsSource = PocketTool
          Case MCH_MY.DRILLING      'Foratura
             ToolCmBx.ItemsSource = DrillTool
          Case MCH_MY.SAWROUGHING   'Sgrossatura con lama
@@ -472,7 +662,7 @@ Public Class MachiningDbPageUC
       EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
       EgtTdbGetToolFromUUID(sTuuid, ToolString)
       Dim bToolExist As Boolean = False
-      For Each CurrTool In ToolCmBx.ItemsSource
+      For Each CurrTool As IEnumerable In ToolCmBx.ItemsSource
          If CurrTool.ToString() = ToolString Then
             bToolExist = True
             Exit For
@@ -514,23 +704,43 @@ Public Class MachiningDbPageUC
       RadOffsetTxBx.Text = LenToString(ToolDouble, 3)
       ' Lista materiali
       m_MaterialsList.Clear()
-      For Each Material In m_MainWindow.m_CurrentMachine.Materials
-         m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+      For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
+         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
+         Else
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, ToolString)
       If ToolString <> String.Empty Then
          Dim sItems() = ToolString.Split(";".ToCharArray)
          Dim Index As Integer = 0
-         For Each Material In m_MaterialsList
+         For Each Material As MachiningMaterial In m_MaterialsList
             Dim Param() As String = sItems(Index).Split(",".ToCharArray)
+            Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
-            If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
-               StringToDouble(Param(1), Material.dMinThickness)
-               StringToDouble(Param(2), Material.dMaxThickness)
-               Material.VerifyIfActive()
-               Index += 1
+            Dim nSubParId As Integer = 0
+            If m_MainWindow.m_CurrentMachine.bWaterJet Then
+               If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
+                  StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             Else
-               Material.VerifyIfActive()
+               If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             End If
          Next
       End If
@@ -606,6 +816,18 @@ Public Class MachiningDbPageUC
          nTemp = If(AcrossChBx.IsChecked(), MCH_SAWFIN_SUB.ACROSS, MCH_SAWFIN_SUB.ALONG)
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, nTemp)
       End If
+      ' Parmetri nascosti di svuotatura
+      If nMachiningType = MCH_MY.POCKETING Then
+         EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
+         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         Dim dToolDiam As Double = 100
+         If Not IsNothing(ToolCmBx.SelectedItem) Then
+            EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
+            EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
+         End If
+         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
+      End If
       ' Parametri WaterJetting
       StringToDouble(ForwardAngleTxBx.Text, dTemp)
       EgtMdbSetCurrMachiningParam(MCH_MP.FORWARDANGLE, dTemp)
@@ -671,9 +893,15 @@ Public Class MachiningDbPageUC
       EgtMdbSetCurrMachiningParam(MCH_MP.OFFSR, dTemp)
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
-      For Each Material In m_MaterialsList
-         If Material.bIsActive Then
-            sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+      For Each Material As MachiningMaterial In m_MaterialsList
+         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+            End If
+         Else
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+            End If
          End If
       Next
       EgtMdbSetCurrMachiningParam(MCH_MP.SYSNOTES, sMaterialString)
@@ -693,8 +921,9 @@ Public Class MachiningDbPageUC
       LonOffsetTxBx.Visibility = Windows.Visibility.Visible
       Select Case nMachiningType
          Case MCH_MY.SAWING   'Parametri Taglio
-            SideAngleTxBl.Visibility = Windows.Visibility.Visible
-            SideAngleTxBx.Visibility = Windows.Visibility.Visible
+            ' nascondo il parametro di sbandamento 
+            SideAngleTxBl.Visibility = Windows.Visibility.Hidden
+            SideAngleTxBx.Visibility = Windows.Visibility.Hidden
             InvertTxBl.Visibility = Windows.Visibility.Visible
             InvertChBx.Visibility = Windows.Visibility.Visible
             AcrossTxBl.Visibility = Windows.Visibility.Hidden
@@ -711,40 +940,58 @@ Public Class MachiningDbPageUC
             TypeBrd.Visibility = Windows.Visibility.Visible
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
-            If RowNum > 2 Then
-               For Index = RowNum - 1 To 2 Step -1
+            If RowNum > 1 Then
+               For Index As Integer = RowNum - 1 To 1 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+
+               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 0)
                LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 0)
                LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
                TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+               TypeBrd.SetValue(Grid.RowSpanProperty, 3)
             End If
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
-            ExtLinkTypeTxBl.Visibility = Windows.Visibility.Visible
-            ExtLinkTypeCmBx.Visibility = Windows.Visibility.Visible
+
             LeadOutTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadOutTypeCmBx.Visibility = Windows.Visibility.Visible
+
+            ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
+            ExtLinkTypeCmBx.Visibility = Windows.Visibility.Hidden
             LeadLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
             LeadLinkTypeCmBx.Visibility = Windows.Visibility.Hidden
-            CurveBrd.Visibility = Windows.Visibility.Hidden
-            If MachParamGrd.Children.Contains(StartPosTxBl) Then
-               MachParamGrd.Children.Remove(StartPosTxBl)
-               MachParamGrd.Children.Remove(StartPosTxBx)
-               TypeGrd.Children.Add(StartPosTxBl)
-               TypeGrd.Children.Add(StartPosTxBx)
-               StartPosTxBl.SetValue(Grid.ColumnProperty, 0)
-               StartPosTxBl.SetValue(Grid.RowProperty, 0)
-               StartPosTxBx.SetValue(Grid.ColumnProperty, 1)
-               StartPosTxBx.SetValue(Grid.RowProperty, 0)
-               StartPosTxBl.SetValue(Grid.RowSpanProperty, 1)
-               StartPosTxBx.SetValue(Grid.RowSpanProperty, 1)
+
+            CurveBrd.Visibility = Windows.Visibility.Visible
+
+            'If Not MachParamGrd.Children.Contains(StartPosTxBl) Then
+            If TypeGrd.Children.Contains(StartPosTxBl) Then
+               'MachParamGrd.Children.Remove(StartPosTxBl)
+               'MachParamGrd.Children.Remove(StartPosTxBx)
+               'TypeGrd.Children.Add(StartPosTxBl)
+               'TypeGrd.Children.Add(StartPosTxBx
+               TypeGrd.Children.Remove(StartPosTxBl)
+               TypeGrd.Children.Remove(StartPosTxBx)
+               MachParamGrd.Children.Add(StartPosTxBl)
+               MachParamGrd.Children.Add(StartPosTxBx)
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 2)
+               StartPosTxBl.SetValue(Grid.RowProperty, 3)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowProperty, 3)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.Style = Application.Current.FindResource("OmagCut_MachLeftCalculatorTextBoxInBorder")
+            ElseIf MachParamGrd.Children.Contains(StartPosTxBl) Then
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 2)
+               StartPosTxBl.SetValue(Grid.RowProperty, 3)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowProperty, 3)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
             End If
             StartPosTxBl.Visibility = Windows.Visibility.Visible
             StartPosTxBx.Visibility = Windows.Visibility.Visible
@@ -800,7 +1047,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -809,7 +1056,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 6 Then
-               For Index = RowNum To 5
+               For Index As Integer = RowNum To 5
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -891,7 +1138,7 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
-               For Index = RowNum - 1 To 2 Step -1
+               For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
                LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
@@ -902,6 +1149,18 @@ Public Class MachiningDbPageUC
                LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
                TypeBrd.SetValue(Grid.RowProperty, 12)
                TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
+               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+               TypeBrd.SetValue(Grid.RowProperty, 12)
+               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             End If
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
@@ -974,7 +1233,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -983,7 +1242,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 4 Then
-               For Index = RowNum To 3
+               For Index As Integer = RowNum To 3
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -1067,6 +1326,14 @@ Public Class MachiningDbPageUC
                StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
                StartPosTxBx.Style = Application.Current.FindResource("OmagCut_LeftCalculatorTextBoxNoBorder")
+            ElseIf MachParamGrd.Children.Contains(StartPosTxBl) Then
+               StartPosTxBl.SetValue(Grid.ColumnProperty, 0)
+               StartPosTxBl.SetValue(Grid.RowProperty, 6)
+               StartPosTxBx.SetValue(Grid.ColumnProperty, 1)
+               StartPosTxBx.SetValue(Grid.RowProperty, 6)
+               StartPosTxBl.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.SetValue(Grid.RowSpanProperty, 3)
+               StartPosTxBx.Style = Application.Current.FindResource("OmagCut_LeftCalculatorTextBoxNoBorder")
             End If
             StartPosTxBl.Visibility = Windows.Visibility.Visible
             StartPosTxBx.Visibility = Windows.Visibility.Visible
@@ -1096,7 +1363,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             Dim RowNum As Integer = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -1105,7 +1372,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 4 Then
-               For Index = RowNum To 3
+               For Index As Integer = RowNum To 3
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -1185,7 +1452,7 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
-               For Index = RowNum - 1 To 2 Step -1
+               For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
                LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
@@ -1253,7 +1520,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -1262,7 +1529,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 4 Then
-               For Index = RowNum To 3
+               For Index As Integer = RowNum To 3
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -1355,7 +1622,7 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
-               For Index = RowNum - 1 To 2 Step -1
+               For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
                LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
@@ -1423,7 +1690,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -1432,7 +1699,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 5 Then
-               For Index = RowNum To 4
+               For Index As Integer = RowNum To 4
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -1461,7 +1728,7 @@ Public Class MachiningDbPageUC
             ' Eliminazione di una riga della tabella Offset
             RowNum = OffsetGrd.RowDefinitions.Count
             If RowNum > 1 Then
-               For Index = RowNum - 1 To 1 Step -1
+               For Index As Integer = RowNum - 1 To 1 Step -1
                   OffsetGrd.RowDefinitions.RemoveAt(Index)
                   OffsetGpBx.SetValue(Grid.RowSpanProperty, 4)
                Next
@@ -1513,15 +1780,15 @@ Public Class MachiningDbPageUC
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
             SideBrd.Visibility = Windows.Visibility.Visible
-            WorkSideTxBl.Visibility = Windows.Visibility.Visible
-            WorkSideCmBx.Visibility = Windows.Visibility.Visible
+            WorkSideTxBl.Visibility = Windows.Visibility.Hidden
+            WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
             HeadSideCmBx.Visibility = Windows.Visibility.Hidden
             TypeBrd.Visibility = Windows.Visibility.Visible
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
-               For Index = RowNum - 1 To 2 Step -1
+               For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
                LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
@@ -1584,27 +1851,30 @@ Public Class MachiningDbPageUC
             BackwardStepSideAngTxBl.Visibility = Windows.Visibility.Hidden
             BackwardStepSideAngTxBx.Visibility = Windows.Visibility.Hidden
             ForwardSawStepTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 15)
-            If SawStepGrd.Children.Contains(ArcIntTxBl) Then
-               SawStepGrd.Children.Remove(ArcIntTxBl)
-               SawStepGrd.Children.Remove(ArcIntTxBx)
-               SawStepGrd.Children.Remove(ArcExtTxBl)
-               SawStepGrd.Children.Remove(ArcExtTxBx)
-               SawStepGrd.RowDefinitions.RemoveAt(2)
-            End If
-            If SawStepGrd.Children.Contains(LastSawStepTxBl) Then
-               SawStepGrd.Children.Remove(LastSawStepTxBl)
-               SawStepGrd.Children.Remove(LastSawStepTxBx)
-               SawStepGrd.RowDefinitions.RemoveAt(2)
+            If DrillStepGrd.Children.Contains(StepTxBx) Then
+               DrillStepGrd.Children.Remove(StepTxBx)
+               SawRouStepGrd.Children.Add(StepTxBx)
+               StepTxBx.SetValue(Grid.ColumnProperty, 1)
+               StepTxBx.SetValue(Grid.RowProperty, 0)
+               StepTxBx.Style = Application.Current.FindResource("OmagCut_CalculatorTextBoxInGroupBox")
+            ElseIf SawStepGrd.Children.Contains(StepTxBx) Then
+               SawStepGrd.Children.Remove(StepTxBx)
+               SawRouStepGrd.Children.Add(StepTxBx)
+               StepTxBx.SetValue(Grid.ColumnProperty, 1)
+               StepTxBx.SetValue(Grid.RowProperty, 0)
+               StepTxBx.Style = Application.Current.FindResource("OmagCut_CalculatorTextBoxInGroupBox")
             End If
             DrillStepBrd.Visibility = Windows.Visibility.Hidden
-            SawRouStepGpBx.Visibility = Windows.Visibility.Hidden
+            SawStepGpBx.Visibility = Windows.Visibility.Hidden
+            SawRouStepGpBx.Visibility = Windows.Visibility.Visible
+            SawRouStepTxBl.Visibility = Windows.Visibility.Visible
             ReturnPosTxBl.Visibility = Windows.Visibility.Hidden
             ReturnPosTxBx.Visibility = Windows.Visibility.Hidden
             OffsetGpBx.Visibility = Windows.Visibility.Hidden
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 4 Then
-               For Index = RowNum - 1 To 4 Step -1
+               For Index As Integer = RowNum - 1 To 4 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -1613,7 +1883,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella Feed
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum < 4 Then
-               For Index = RowNum To 3
+               For Index As Integer = RowNum To 3
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   FeedGrd.RowDefinitions.Add(Row)
@@ -1693,7 +1963,7 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum < 3 Then
-               For Index = RowNum To 2
+               For Index As Integer = RowNum To 2
                   Dim Row As New RowDefinition
                   Row.Height = New GridLength(1, GridUnitType.Star)
                   ' Row.SetValue(Grid.RowSpanProperty, 3)
@@ -1782,7 +2052,7 @@ Public Class MachiningDbPageUC
             ' Definizione di una riga della tabella con la giusta altezza
             RowNum = FeedGrd.RowDefinitions.Count
             If RowNum > 3 Then
-               For Index = RowNum - 1 To 3 Step -1
+               For Index As Integer = RowNum - 1 To 3 Step -1
                   FeedGrd.RowDefinitions.RemoveAt(Index)
                Next
             End If
@@ -1794,7 +2064,7 @@ Public Class MachiningDbPageUC
             ' Eliminazione di una riga della tabella Offset
             RowNum = OffsetGrd.RowDefinitions.Count
             If RowNum > 1 Then
-               For Index = RowNum - 1 To 1 Step -1
+               For Index As Integer = RowNum - 1 To 1 Step -1
                   OffsetGrd.RowDefinitions.RemoveAt(Index)
                   OffsetGpBx.SetValue(Grid.RowSpanProperty, 4)
                Next
@@ -2014,6 +2284,16 @@ Public Class MachiningDbPageUC
 
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
+      Dim dMaxThick As Double = 0
+      If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         ' solo per water jet controllo lo spessore massimo ammissibile
+         dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
+         Dim dVal As Double
+         StringToLen(MaxThicknessTxBx.Text, dVal)
+         If dVal > dMaxThick Then
+            MaxThicknessTxBx.Text = LenToString(dMaxThick, 3)
+         End If
+      End If
       StringToLen(MaxThicknessTxBx.Text, SelectedMaterial.dMaxThickness)
       SelectedMaterial.VerifyIfActive()
    End Sub
@@ -2145,7 +2425,7 @@ Public Structure IdNameStruct
    End Function
 
    Friend Shared Function IndFromId(Id As Integer, List As ObservableCollection(Of IdNameStruct)) As Integer
-      For i = 0 To List.Count - 1
+      For i As Integer = 0 To List.Count - 1
          If List(i).Id = Id Then Return i
       Next
       Return 0
@@ -2161,6 +2441,7 @@ Class MachiningMaterial
    Implements INotifyPropertyChanged
 
    Private m_nId As Integer
+   Private m_nSubId As Integer
    Private m_sName As String
    Private m_dMinThickness As Double
    Private m_dMaxThickness As Double
@@ -2172,6 +2453,12 @@ Class MachiningMaterial
       End Get
    End Property
 
+   Public ReadOnly Property nSubId As Integer
+      Get
+         Return m_nSubId
+      End Get
+   End Property
+
    Public ReadOnly Property Name As String
       Get
          Return m_sName
@@ -2210,6 +2497,15 @@ Class MachiningMaterial
       m_bIsActive = False
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_nSubId = nSubId
+      m_sName = sName
+      m_dMinThickness = 0
+      m_dMaxThickness = 0
+      m_bIsActive = False
+   End Sub
+
    Public Sub VerifyIfActive()
       Dim bIsActive As Boolean = ( m_dMaxThickness > m_dMinThickness + EPS_SMALL)
       If bIsActive <> m_bIsActive Then

Machine/PolishingsPageUC.xaml.vb

@@ -113,12 +113,12 @@ Public Class PolishingsPageUC
 
       ' Recupero nome utensile tramite UUID
       Dim ToolString As String = String.Empty
-      For Each KitItem In m_KitList
-         For Each KitMachItem In KitItem.KitMachList
+      For Each KitItem As Kit In m_KitList
+         For Each KitMachItem As KitMach In KitItem.KitMachList
             Dim selToolIndex As Integer = 0
             EgtTdbGetToolFromUUID(KitMachItem.sToolUUID, ToolString)
             Dim bToolExist As Boolean = False
-            For Each CurrTool In ToolList
+            For Each CurrTool As String In ToolList
                If CurrTool.ToString() = ToolString Then
                   bToolExist = True
                   Exit For
@@ -177,7 +177,7 @@ Public Class PolishingsPageUC
       If Not String.IsNullOrWhiteSpace( KitNameTxBx.Text) Then
          ' Verifico che il nome non sia già utilizzato
          Dim bNameExist As Boolean = False
-         For Each Kit In m_KitList
+         For Each Kit As Kit In m_KitList
             If Kit.sName = KitNameTxBx.Text Then
                bNameExist = True
                Exit For
@@ -448,7 +448,7 @@ Public Class PolishingsPageUC
          If Not IsNothing(m_OldItem) Then
             Dim nKitIndex As Integer = m_OldItem.nId
             If nKitIndex <= m_KitList.Count Then
-               For Each KitMachItem In m_KitList(nKitIndex - 1).KitMachList
+               For Each KitMachItem As KitMach In m_KitList(nKitIndex - 1).KitMachList
                   If KitMachItem.m_IsModifiedId OrElse KitMachItem.m_IsModifiedToolUUID OrElse KitMachItem.m_IsModifiedToolName OrElse KitMachItem.m_IsModifiedSelTool OrElse
                      KitMachItem.m_IsModifiedActive OrElse KitMachItem.m_IsModifiedContour OrElse KitMachItem.m_IsModifiedOffCnt OrElse KitMachItem.m_IsModifiedZigZagX OrElse
                      KitMachItem.m_IsModifiedOffZigZagX OrElse KitMachItem.m_IsModifiedZigZagY OrElse KitMachItem.m_IsModifiedStepX OrElse KitMachItem.m_IsModifiedStepY OrElse
@@ -466,7 +466,7 @@ Public Class PolishingsPageUC
       If IsNothing( m_OldItem) Then Return
       Dim nKitIndex As Integer = m_OldItem.nId
       If nKitIndex <= m_KitList.Count Then
-         For Each KitMachItem In m_KitList(nKitIndex - 1).KitMachList
+         For Each KitMachItem As KitMach In m_KitList(nKitIndex - 1).KitMachList
             KitMachItem.m_IsModifiedId = False
             KitMachItem.m_IsModifiedToolUUID = False
             KitMachItem.m_IsModifiedToolName = False
@@ -911,7 +911,7 @@ Class KitMach
                   m_sToolName = sToolNameDummy
                End If
 
-               For Each sToolUuidItem In m_MainWindow.m_MachinePageUC.m_PolishingsPageUC.ToolUuidList
+               For Each sToolUuidItem As String In m_MainWindow.m_MachinePageUC.m_PolishingsPageUC.ToolUuidList
                   EgtTdbGetToolFromUUID(sToolUuidItem, sToolNameDummy)
                   If sToolNameDummy.Equals(m_sToolName) Then
                      m_sToolUUID = sToolUuidItem

Machine/SetUpPage.xaml.vb

@@ -34,8 +34,8 @@ Public Class SetUpPage
             EgtOutLog("TC warning : too many tools (max 12 * 5)")
             ColNum = 12
          End If
-         For Index = 12 To ColNum + 1 Step -1
-            For Index2 = Index * 5 To (Index - 1) * 5 + 1 Step -1
+         For Index As Integer = 12 To ColNum + 1 Step -1
+            For Index2 As Integer = Index * 5 To (Index - 1) * 5 + 1 Step -1
                TlChGrid.Children.Remove(GetTlChPosFromIndex(Index2))
                TlChGrid.Children.Remove(GetTxBxFromIndex(Index2))
             Next
@@ -43,14 +43,14 @@ Public Class SetUpPage
             TlChGrid.ColumnDefinitions.RemoveAt(Index * 2 - 2)
          Next
          ' Modifico il numero di elementi presenti sull'ultima colonna
-         For Index = ColNum * 5 To m_CurrMachine.ToolChangerNbr + 1 Step -1
+         For Index As Integer = ColNum * 5 To m_CurrMachine.ToolChangerNbr + 1 Step -1
             TlChGrid.Children.Remove(GetTlChPosFromIndex(Index))
             TlChGrid.Children.Remove(GetTxBxFromIndex(Index))
          Next
          ' Assegno lunghezza alla scrollviewer
          TlChGrid.Width = m_MainWindow.ActualWidth / 15 * 1.6 * ColNum * 2
          ' Carico i nomi dei portautensili
-         For Index = 1 To m_CurrMachine.ToolChangerNbr
+         For Index As Integer = 1 To m_CurrMachine.ToolChangerNbr
             GetTlChPosFromIndex(Index).PositionNameTxBl.Text = m_CurrMachine.ToolChangerName(Index - 1)
          Next
       Else
@@ -64,8 +64,8 @@ Public Class SetUpPage
             EgtOutLog("ManTC warning : too many tools (max 12 * 5)")
             ManColNum = 12
          End If
-      For Index = 12 To ManColNum + 1 Step -1
-         For Index2 = Index * 5 To (Index - 1) * 5 + 1 Step -1
+      For Index As Integer = 12 To ManColNum + 1 Step -1
+         For Index2 As Integer = Index * 5 To (Index - 1) * 5 + 1 Step -1
             ManTlChGrid.Children.Remove(GetManTlChPosFromIndex(Index2))
             ManTlChGrid.Children.Remove(GetManTxBxFromIndex(Index2))
          Next
@@ -73,14 +73,14 @@ Public Class SetUpPage
          ManTlChGrid.ColumnDefinitions.RemoveAt(Index * 2 - 2)
       Next
       ' Modifico il numero di elementi presenti sull'ultima colonna
-      For Index = ManColNum * 5 To m_CurrMachine.ManualToolChangerNbr + 1 Step -1
+      For Index As Integer = ManColNum * 5 To m_CurrMachine.ManualToolChangerNbr + 1 Step -1
          ManTlChGrid.Children.Remove(GetManTlChPosFromIndex(Index))
          ManTlChGrid.Children.Remove(GetManTxBxFromIndex(Index))
       Next
       ' Assegno lunghezza alla scrollviewer
       ManTlChGrid.Width = m_MainWindow.ActualWidth / 15 * 1.6 * ManColNum * 2
       ' Carico i nomi dei portautensili
-      For Index = 1 To m_CurrMachine.ManualToolChangerNbr
+      For Index As Integer = 1 To m_CurrMachine.ManualToolChangerNbr
          GetManTlChPosFromIndex(Index).PositionNameTxBl.Text = m_CurrMachine.ManualToolChangerName(Index - 1)
       Next
 
@@ -112,10 +112,10 @@ Public Class SetUpPage
       InitializeToolGroup( m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg( 90756), m_PolishingsList)
 
       ' Posiziono utensili già posizionati sul portautensili
-      For Each ToolPosition In m_CurrMachine.ToolChanger
+      For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
          If ToolPosition.sTool <> String.Empty Then
             If Not IsNothing( m_DrillbitsList) Then
-               For Each Item In m_DrillbitsList.Items
+               For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_DrillbitsList.Items.Remove(Item)
@@ -124,7 +124,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_MillsList) Then
-               For Each Item In m_MillsList.Items
+               For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_MillsList.Items.Remove(Item)
@@ -133,7 +133,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_CupsList) Then
-               For Each Item In m_CupsList.Items
+               For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_CupsList.Items.Remove(Item)
@@ -142,7 +142,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_PolishingsList) Then
-               For Each Item In m_PolishingsList.Items
+               For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_PolishingsList.Items.Remove(Item)
@@ -156,10 +156,10 @@ Public Class SetUpPage
       Next
 
       ' Posiziono utensili già posizionati sul portautensili manuale
-      For Each ToolPosition In m_CurrMachine.ManualToolChanger
+      For Each ToolPosition As ToolChangerPos In m_CurrMachine.ManualToolChanger
          If ToolPosition.sTool <> String.Empty Then
             If Not IsNothing( m_DrillbitsList) Then
-               For Each Item In m_DrillbitsList.Items
+               For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_DrillbitsList.Items.Remove(Item)
@@ -168,7 +168,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_MillsList) Then
-               For Each Item In m_MillsList.Items
+               For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_MillsList.Items.Remove(Item)
@@ -177,7 +177,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_CupsList) Then
-               For Each Item In m_CupsList.Items
+               For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_CupsList.Items.Remove(Item)
@@ -186,7 +186,7 @@ Public Class SetUpPage
                Next
             End If
             If Not IsNothing( m_PolishingsList) Then
-               For Each Item In m_PolishingsList.Items
+               For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
                      m_PolishingsList.Items.Remove(Item)
@@ -784,7 +784,7 @@ Public Class SetUpPage
 
    ' Funzione che rimette un utensile nell'albero
    Private Sub RestoreToolInList(sToolName As String)
-      For Each Tool In m_SetUpToolsList.Items
+      For Each Tool As CustomItem In m_SetUpToolsList.Items
          If Tool.Name = sToolName Then
             If Tool.nType = MCH_TY.DRILL_STD Then
                m_DrillbitsList.Items.Add(Tool)
@@ -1119,7 +1119,7 @@ Public Class SetUpPage
          EgtTdbGetCurrToolParam(MCH_TP.TCPOS, ToolPositionName)
          If String.IsNullOrEmpty(ToolPositionName) Then Return
          ' Cerco il portautensile nella lista degli automatici per vederne lo stato
-         For Each TlChPos In m_CurrMachine.ToolChanger
+         For Each TlChPos As ToolChangerPos In m_CurrMachine.ToolChanger
             If TlChPos.sName = ToolPositionName Then
                ' Se la posizione è libera
                If GetTxBxFromIndex(TlChPos.nPosition).Text = String.Empty Then
@@ -1137,7 +1137,7 @@ Public Class SetUpPage
             End If
          Next
          ' Cerco il portautensile nella lista dei manuali per vederne lo stato
-         For Each ManTlChPos In m_CurrMachine.ManualToolChanger
+         For Each ManTlChPos As ToolChangerPos In m_CurrMachine.ManualToolChanger
             If ManTlChPos.sName = ToolPositionName Then
                ' Se la posizione è libera
                If GetManTxBxFromIndex(ManTlChPos.nPosition).Text = String.Empty Then

Machine/ToolsDbPageUC.xaml

@@ -434,13 +434,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
             <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
 
             </Grid>
 

Machine/ToolsDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports OmagCUT.TreeViewItem
 Imports System.ComponentModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class ToolsDbPageUC
 
@@ -16,6 +17,8 @@ Public Class ToolsDbPageUC
    Dim ToolsList As New ObservableCollection(Of CathegoryItem)
    ' Proprietà
    Private m_bFirst As Boolean = True
+   ' Flag nuova gestione parametri lama in disegno
+   Private m_bNewSawbladeMaker As Boolean = False
    ' Stringa identificativa variabile geometrica in modifica
    Private m_sCurrVar As String = String.Empty
    ' Parametri dell'utensile corrente
@@ -53,6 +56,8 @@ Public Class ToolsDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 15)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = EgtMsg(91126)
+      ImportBtn.Content = EgtMsg(91127)
 
       NameTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 1)
       TCPosTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 2)
@@ -160,16 +165,20 @@ Public Class ToolsDbPageUC
          ToolScene.SetStatusNull()
          ' Inizializzo le famiglie di utensili nell'albero
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-         InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg( 90751))
-         InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg( 90752))
-         InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg( 90753))
-         InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg( 90754))
-         InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg( 90756))
-         InitializeToolGroup(m_CurrMachine.bWaterJet, MCH_TY.WATERJET, EgtMsg( 90755))
+         InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg(90751))
+         InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg(90752))
+         InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg(90753))
+         InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg(90754))
+         InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg(90756))
+         InitializeToolGroup(m_CurrMachine.bWaterJet, MCH_TY.WATERJET, EgtMsg(90755))
          ' Sposto tutti i parametri in su di una riga se testa e uscita sono disattivati
          If Not m_CurrMachine.bShowHeadExit Then
             MoveParam()
          End If
+         ' Verifico se macchina con nuovo SawbladeMaker
+         Dim sSawBladeMaker As String = ""
+         GetPrivateProfileString(S_TOOLS, K_SAWBLADEMAKER, "", sSawBladeMaker, m_MainWindow.GetIniFile())
+         m_bNewSawbladeMaker = String.Compare(sSawBladeMaker, "MakeStoneSawBlade.lua", True)
          m_bFirst = False
       Else
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
@@ -182,7 +191,7 @@ Public Class ToolsDbPageUC
    'Funzione che permette l'inizializzazione di albero e parametri all'apertura della pagina ToolsDb
    Private Sub InitializeFirstSelectedItem()
       If ToolsList.Count > 0 Then
-         For Each ToolFamily In ToolsList
+         For Each ToolFamily As CathegoryItem In ToolsList
             If ToolFamily.Items.Count > 0 Then
                ToolFamily.IsExpanded = True
                ToolFamily.Items(0).IsSelected = True
@@ -227,7 +236,7 @@ Public Class ToolsDbPageUC
          Dim NewName As String = SelectedCathegory.Name
          EgtTdbGetToolNewName(NewName)
          If EgtTdbAddTool(NewName, SelectedCathegory.nTType) Then
-            For Each ToolFamily In ToolsList
+            For Each ToolFamily As CathegoryItem In ToolsList
                If ToolFamily.nTType = SelectedCathegory.nTType Then
                   Dim NewToolItem As New CustomItem(NewName, SelectedCathegory.nTType)
                   ToolFamily.Items.Add(NewToolItem)
@@ -239,17 +248,17 @@ Public Class ToolsDbPageUC
             Next
             ' Determino il tipo di utensile
             Dim nType As Integer
-            EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+            EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
             ' Imposto testa e uscita
             ' Sempre lame su H1.1 e utensili foretto, fresa e mola da scasso su H1.2
-            If ( nType And MCH_TF.WATERJET) = 0 then
+            If (nType And MCH_TF.WATERJET) = 0 Then
                Dim bSaw As Boolean = ((nType And MCH_TF.SAWBLADE) <> 0)
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H1")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, If(bSaw, 1, 2))
-            ' Waterjet sempre su H2.1
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H1")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, If(bSaw, 1, 2))
+               ' Waterjet sempre su H2.1
             Else
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H2")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, 1)
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H2")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, 1)
             End If
             ' Per macchine senza ToolChanger, resetto la posizione su questo
             If m_CurrMachine.ShowToolChanger = 0 Then
@@ -315,10 +324,10 @@ Public Class ToolsDbPageUC
             ' Aggiorno lista utensili
             Dim CurrType As Integer
             EgtTdbGetCurrToolParam(MCH_TP.TYPE, CurrType)
-            For Each ToolFamily In ToolsList
+            For Each ToolFamily As CathegoryItem In ToolsList
                If ToolFamily.nTType = CurrType Then
-                  Dim NewToolItem As New CustomItem( NewName, CurrType)
-                  ToolFamily.Items.Add( NewToolItem)
+                  Dim NewToolItem As New CustomItem(NewName, CurrType)
+                  ToolFamily.Items.Add(NewToolItem)
                   NewToolItem.IsSelected = True
                   GetToolParams()
                   m_OldItem = ToolTreeView.SelectedItem
@@ -354,15 +363,15 @@ Public Class ToolsDbPageUC
          Dim sItems() As String = sUserNotes.Split(";".ToCharArray)
          For i As Integer = 0 To sItems.Count() - 1
             If sItems(i).Contains("CODE=") Then
-               CodeTxBx.Text = sItems(i).Substring( 5)
+               CodeTxBx.Text = sItems(i).Substring(5)
             ElseIf sItems(i).Contains("SUPPL=") Then
-               SupplierTxBx.Text = sItems(i).Substring( 6)
+               SupplierTxBx.Text = sItems(i).Substring(6)
             ElseIf sItems(i).Contains("S/N=") Then
-               SerNbrTxBx.Text = sItems(i).Substring( 4)
+               SerNbrTxBx.Text = sItems(i).Substring(4)
             ElseIf sItems(i).Contains("END=") Then
                EndLifeChBx.IsChecked = True
-               m_sEndLife = sItems(i).Substring( 4)
-            ElseIf Not String.IsNullOrWhiteSpace(sItems(i))
+               m_sEndLife = sItems(i).Substring(4)
+            ElseIf Not String.IsNullOrWhiteSpace(sItems(i)) Then
                sToShow &= sItems(i) & ";"
             End If
          Next
@@ -383,7 +392,7 @@ Public Class ToolsDbPageUC
       sUserNotes &= "SUPPL=" & SupplierTxBx.Text & ";"
       sUserNotes &= "S/N=" & SerNbrTxBx.Text & ";"
       If EndLifeChBx.IsChecked Then
-         If String.IsNullOrWhiteSpace( m_sEndLife) Then
+         If String.IsNullOrWhiteSpace(m_sEndLife) Then
             m_sEndLife = My.Computer.Clock.LocalTime.ToString("dd.MM.yyyy HH:mm:ss")
          End If
          sUserNotes &= "END=" & m_sEndLife & ";"
@@ -459,7 +468,7 @@ Public Class ToolsDbPageUC
          ' Cancello l'utensile
          EgtTdbRemoveTool(SelectedItem.Name)
          ' Rimuovo il nome dell'albero
-         For Each ToolFamily In ToolsList
+         For Each ToolFamily As CathegoryItem In ToolsList
             If (ToolFamily.nTType And SelectedItem.nType) <> 0 Then
                ToolFamily.Items.Remove(SelectedItem)
                If ToolFamily.Items.Count = 0 Then
@@ -479,18 +488,217 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista utensili per esportazione
+      Dim ToolToExportList = New ObservableCollection(Of ImpExpToolFamily)
+      Dim Family As CathegoryItem
+      Dim Tool As CustomItem
+      For Each Family In ToolsList
+         Dim ImpExpToolFamily As New ImpExpToolFamily(Family.Name, Family.nTType)
+         ImpExpToolFamily.PictureString = "/Resources/ToolsTreeviewImages/Folder.png"
+         For Each Tool In Family.Items
+            Dim CurrTool = New ImpExpToolItem(Tool.Name, False)
+            ImpExpToolFamily.ToolList.Add(CurrTool)
+         Next
+         ToolToExportList.Add(ImpExpToolFamily)
+      Next
+
+      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList)
+      Dim ExportWnd As New ImportExportToolWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Tools (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileToolNameList As String() = Nothing
+      Dim ImportFileToolFamilyList As Integer() = Nothing
+      If Not EgtTdbToBeImported(ImportFilePath, ImportFileToolNameList, ImportFileToolFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim ToolToImportList As New ObservableCollection(Of ImpExpToolFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For ToolIndex As Integer = 0 To ImportFileToolNameList.Count - 1
+         Dim ToolName As String = ImportFileToolNameList(ToolIndex)
+         Dim ToolFamily As Integer = ImportFileToolFamilyList(ToolIndex)
+         ToolFamily = ToolFamily And
+            (MCH_TF.DRILLBIT Or
+            MCH_TF.SAWBLADE Or
+            MCH_TF.MILL Or
+            MCH_TF.MORTISE Or
+            MCH_TF.CHISEL Or
+            MCH_TF.WATERJET Or
+            MCH_TF.COMPO)
+         Dim bFounded As Boolean = False
+         Dim ToolToImportFamily As ImpExpToolFamily
+         For Each ToolToImportFamily In ToolToImportList
+            If (ToolFamily = ToolToImportFamily.FamilyType) Then
+               ToolToImportFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpToolFamily(GetToolFamilyName(ToolFamily), ToolFamily)
+            NewFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+            ToolToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, ImportFilePath, ImportFileToolNameList)
+      Dim ImportWnd As New ImportExportToolWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineTools(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(ToolName As String) As Boolean
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         Dim ToolItem As CustomItem
+         For Each ToolItem In ToolFamily.Items
+            If ToolName = ToolItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetToolFamilyName(NewToolFamily As Integer) As String
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         If NewToolFamily = ToolFamily.nTType Then
+            Return ToolFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineTools(vsImportedTools As String())
+      ' Leggo tutti gli utensili presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveToolsFamilies() As ToolsFamily = MyReadToolFamilies(m_CurrMachine.sMachIniFile)
+      Dim ToolsFamilyIndex As Integer = 0
+      Dim ToolsFamilyItem As ToolsFamily
+      For Each ToolsFamilyItem In ActiveToolsFamilies
+         ' dalla lista che ho ricavato dalla libreria recupero gli utensili associati
+         Dim FamilyTreeView As New CathegoryItem(ToolsFamilyItem.Name, ToolsFamilyItem.Id)
+         Dim ToolFamilyItem = ToolsList.FirstOrDefault(Function(ToolFamily) ToolFamily.nTType = ToolsFamilyItem.Id)
+         If IsNothing(ToolFamilyItem) Then
+            ToolsList.Insert(ToolsFamilyIndex, FamilyTreeView)
+         Else
+            ' ricerco l'indice nella lista Tools
+
+         End If
+         Dim nType As Integer = 0
+         Dim ToolName As String = String.Empty
+         Dim ToolIndex As Integer = 0
+         'EgtSetCurrentContext(ToolScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         If EgtTdbGetFirstTool(ToolsFamilyItem.Id, ToolName, nType) Then
+            Dim ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+            If IsNothing(ToolItem) Then
+               ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            ElseIf vsImportedTools.Contains(ToolName) Then
+               ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+               ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            End If
+            ToolIndex += 1
+            While EgtTdbGetNextTool(ToolsFamilyItem.Id, ToolName, nType)
+               ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+               If IsNothing(ToolItem) Then
+                  ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               ElseIf vsImportedTools.Contains(ToolName) Then
+                  ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+                  ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+                  ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               End If
+               ToolIndex += 1
+            End While
+         End If
+         ToolsFamilyIndex += 1
+      Next
+
+   End Sub
+
+   Public Function MyReadToolFamilies(sMachineIniPath As String) As ToolsFamily()
+      Dim ActiveToolsFamiliesList As New List(Of ToolsFamily)
+
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Punta e Lama nelle famiglie di utensili attivi è invertito 
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_SAWBLADE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.SAWBLADE, EgtMsg(31000 + 2)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_DRILLBIT, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.DRILLBIT, EgtMsg(31000 + 1)))
+      End If
+
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MILL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(31000 + 3)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "CupWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90754)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "PolishingWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90756)))
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MORTISE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MORTISE, EgtMsg(31000 + 4)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_CHISEL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.CHISEL, EgtMsg(31000 + 9)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_COMPO, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.COMPO, EgtMsg(31000 + 5)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.WATERJET, EgtMsg(31010)))
+      End If
+      Return ActiveToolsFamiliesList.ToArray
+   End Function
+
    Friend Sub InitializeToolGroup(bEnabled As Boolean, nTType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
-      Dim ToolCathegory As New CathegoryItem( sFName, nTType)
+      Dim ToolCathegory As New CathegoryItem(sFName, nTType)
       Dim nType As Integer = 0
       Dim ToolName As String = String.Empty
-      Dim bFound As Boolean = EgtTdbGetFirstTool( nTType, ToolName, nType)
+      Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add( New CustomItem( ToolName, nType))
-         bFound = EgtTdbGetNextTool( nTType, ToolName, nType)
+         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
-      ToolsList.Add( ToolCathegory)
+      ToolsList.Add(ToolCathegory)
    End Sub
 
    Private Sub GetToolParams()
@@ -545,7 +753,7 @@ Public Class ToolsDbPageUC
       HeadTxBx.Text = ToolString
       EgtTdbGetCurrToolParam(MCH_TP.EXIT_, ToolInt)
       ExitTxBx.Text = ToolInt.ToString()
-      if Not GetSpecials() Then
+      If Not GetSpecials() Then
          EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, ToolString)
          UserNotesTxBx.Text = ToolString
       End If
@@ -601,7 +809,7 @@ Public Class ToolsDbPageUC
       EgtTdbSetCurrToolParam(MCH_TP.HEAD, HeadTxBx.Text)
       Int32.TryParse(ExitTxBx.Text, nTemp)
       EgtTdbSetCurrToolParam(MCH_TP.EXIT_, nTemp)
-      if Not SetSpecials() Then
+      If Not SetSpecials() Then
          EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, UserNotesTxBx.Text)
       End If
    End Sub
@@ -637,7 +845,7 @@ Public Class ToolsDbPageUC
       Dim bShowUserNotes As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowUserNotes <> 0) Or m_CurrMachine.ShowUserNotes = 1)
       UserNotesTxBl.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       UserNotesTxBx.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
-      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1) 
+      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1)
       SerNbrTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       SerNbrTxBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       CodeTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
@@ -708,6 +916,8 @@ Public Class ToolsDbPageUC
       ' Aggiorno visualizzazione
       EgtSetCurrentContext(ToolScene.GetCtx())
       EgtSetView(VT.TOP, False)
+      'EgtSetGenericView(150, -150)
+      'EgtSetView(VT.ISO_SE, False)
       EgtZoom(ZM.ALL)
    End Sub
 
@@ -757,6 +967,10 @@ Public Class ToolsDbPageUC
             nMsg = MSG_TOOLSDBPAGEUC + 23       ' Spessore
          Case MCH_TP.MAXMAT
             nMsg = MSG_TOOLSDBPAGEUC + 24       ' Tagliente
+         Case MCH_TP.CORE
+            nMsg = 90720                        ' Anima
+         Case STEM
+            nMsg = 90719                        ' Lunghezza portautensile
       End Select
       ' Predispongo calcolatrice (converto sempre in UIUnits perchè tutte lunghezze)
       Dim EgtCalculator As New EgtCalculatorWD(m_MainWindow, EgtToUiUnits(dVal), 300, WidthType.PIXEL, 0, 0, EgtMsg(nMsg))
@@ -774,7 +988,7 @@ Public Class ToolsDbPageUC
    Private Sub RecreateToolDraw(ByVal dVal As Double)
       ' Salvo il vecchio valore
       Dim dOldVal As Double
-      GetVariableValue( dOldVal)
+      GetVariableValue(dOldVal)
       ' Aggiorno dati utensile
       SetVariableValue(dVal)
       ' Creo utensile
@@ -787,7 +1001,20 @@ Public Class ToolsDbPageUC
    Private Function GetVariableValue(ByRef dVal As Double) As Boolean
       ' Recupero valore variabile
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      Return EgtTdbGetCurrToolParam(GetVariableType(), dVal)
+      Dim nVarType As Integer = GetVariableType()
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nVarType <> STEM Then
+         Return EgtTdbGetCurrToolParam(nVarType, dVal)
+      Else
+         Dim dL, dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.LEN, dL) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            dVal = Math.Max(dL - (dCore + dTh) / 2, 0.0)
+            Return True
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function SetVariableValue(ByVal dVal As Double) As Boolean
@@ -801,6 +1028,30 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dVal + 1)
             Case MCH_TP.DIAM
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
+            Case MCH_TP.THICK
+               If m_bNewSawbladeMaker Then
+                  Dim dTh, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dTh) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
+            Case MCH_TP.CORE
+               If m_bNewSawbladeMaker Then
+                  Dim dCore, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dCore) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
          End Select
       ElseIf m_nToolType = MCH_TY.DRILL_STD Then
          Select Case nType
@@ -826,7 +1077,19 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
          End Select
       End If
-      Return EgtTdbSetCurrToolParam(nType, dVal)
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nType <> STEM Then
+         Return EgtTdbSetCurrToolParam(nType, dVal)
+      Else
+         Dim dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            Dim dL As Double = Math.Max(dVal, 0.0) + ((dCore + dTh) / 2)
+            EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dL + 1)
+            Return EgtTdbSetCurrToolParam(MCH_TP.LEN, dL)
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function GetVariableType() As Integer
@@ -839,6 +1102,10 @@ Public Class ToolsDbPageUC
          nType = MCH_TP.THICK
       ElseIf m_sCurrVar = "MAXMAT" Then
          nType = MCH_TP.MAXMAT
+      ElseIf m_sCurrVar = "CORE" Then
+         nType = MCH_TP.CORE
+      ElseIf m_sCurrVar = "STEM" Then
+         nType = STEM
       End If
       Return nType
    End Function
@@ -900,6 +1167,13 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.THICK, dToolThick)
                EgtOutLog("ToolThick too small ->" & DoubleToString(dToolThick, 1))
             End If
+            Dim dToolCore As Double
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dToolCore)
+            If dToolCore < EPS_SMALL Then
+               dToolCore = If(dToolLen >= dToolThick, dToolThick - 1, 2 * dToolLen - dToolThick)
+               EgtTdbSetCurrToolParam(MCH_TP.CORE, dToolCore)
+               EgtOutLog("ToolCore too small ->" & DoubleToString(dToolCore, 1))
+            End If
             Dim dToolMaxMat As Double
             EgtTdbGetCurrToolParam(MCH_TP.MAXMAT, dToolMaxMat)
             If dToolMaxMat < EPS_SMALL Then
@@ -1002,7 +1276,7 @@ Public Class ToolsDbPageUC
    End Function
 
    Private Function CreateToolDraw() As Boolean
-      Dim nErr As Integer = EgtTdbCurrToolDraw( m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
+      Dim nErr As Integer = EgtTdbCurrToolDraw(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
       EgtSetCurrentContext(ToolScene.GetCtx())
       Return (nErr = 0)
    End Function
@@ -1055,4 +1329,4 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
-End Class
+End Class

Machine/WaterJetPageUC.xaml

@@ -0,0 +1,263 @@
+<UserControl x:Class="WaterJetPageUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+   mc:Ignorable="d" 
+   d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
+
+    <!-- Definizione della PolishingsPage -->
+    <Border Style="{DynamicResource OmagCut_PageBorder}">
+
+        <Grid Name="WaterJetPageGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="8*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!--Lista dei materiali-->
+            <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+                      Header="{Binding Material_Msg}"
+                      Grid.Row="0" BorderThickness="0">
+
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
+
+                    <!--Lista dei materiali-->
+                    <ListBox Name="MaterialsLstBx" 
+                             ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
+                             Grid.RowSpan="2">
+                        <ListBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ListBox.ItemTemplate>
+                    </ListBox>
+                    <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                    <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                                          Width="220"
+                                          Text="{Binding sNewMaterial}"
+                                          Visibility="{Binding NewMaterial_Visibility}"
+                                          Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                          KeyboardPosition="Top"/>
+                    <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                    <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewMaterialBtn" Grid.Column="0"
+                                Content="{Binding New_Msg}"
+                                Command="{Binding NewMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                                Content="{Binding Delete_Msg}"
+                                Command="{Binding DeleteMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                                Content="{Binding Modify_Msg}"
+                                Command="{Binding ModifyMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                    </UniformGrid>
+
+                </Grid>
+
+            </GroupBox>
+
+            <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+            <Border Style="{DynamicResource OmagCut_Border}" 
+                    Grid.Column="1" Grid.Row="0" 
+                    Grid.ColumnSpan="2" Grid.RowSpan="1">
+
+                <Grid Name="SubMaterialGrd" Grid.Column="1">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
+
+                    <!--Sottocategoria dei materiali associata alla lista precedente-->
+                    <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+                              Header="{Binding SubMaterial_Msg}"
+                              Grid.Column="0" Grid.Row="0" 
+                              Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
+
+                        <Grid Grid.Column="1">
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
+
+                            <!--Lista dei materiali-->
+                            <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
+                                     Grid.RowSpan="2">
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
+
+                            <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                            <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                                                  Width="220"
+                                                  Text="{Binding sNewSubMaterial}"
+                                                  Visibility="{Binding NewSubMaterial_Visibility}"
+                                                  Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                                  KeyboardPosition="Top"/>
+
+                            <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                            <UniformGrid Grid.Row="2" Columns="3">
+                                <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                                        Content="{Binding New_Msg}"
+                                        Command="{Binding NewSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Delete_Msg}"
+                                        Command="{Binding DeleteSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Modify_Msg}"
+                                        Command="{Binding ModifySubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                            </UniformGrid>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                    <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+                    <GroupBox Name="ParamsGpBx" 
+                              Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
+                              Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
+                        
+                        <!--Titolazione delle colonne della tabella-->
+                        <GroupBox.Header >
+                            <Grid Width="700">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+
+                                <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                                <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                            </Grid>
+                            
+                        </GroupBox.Header>
+                        
+                        <!--Definizione della Grid dei parametri delle lavorazioni-->
+                        <Grid Grid.Column="2">
+                            <Grid.RowDefinitions>
+                                <RowDefinition Height="7*"/>
+                                <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
+                            </Grid.RowDefinitions>
+
+                            <ListBox Name="ParamLstBx"
+                                     ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
+                                     Margin="0,0,0,0"
+                                     Grid.RowSpan="2">
+                                <ListBox.ItemTemplate>
+                                    <DataTemplate>
+                                        <Grid Width="700">
+                                            <Grid.ColumnDefinitions>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                                <ColumnDefinition Width="1*"/>
+                                            </Grid.ColumnDefinitions>
+
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                            <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+
+                                        </Grid>
+                                    </DataTemplate>
+                                </ListBox.ItemTemplate>
+                            </ListBox>
+
+                            <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="3">
+                                <Button Name="NewParamBtn" Grid.Column="0"
+                                        Command="{Binding NewWjParamCommand}"
+                                        Content="{Binding New_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                                <Button Name="RemoveParamBtn" Grid.Column="1"
+                                        Command="{Binding DeleteWjParamCommand}"
+                                        Content="{Binding Delete_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                            </UniformGrid>
+
+                        </Grid>
+
+                    </GroupBox>
+
+                </Grid>
+            </Border>
+            <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+                    Command="{Binding SaveCommand}"
+                    Content="{Binding Save_Msg}"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+        </Grid>
+
+    </Border>
+
+</UserControl>

Machine/WaterJetPageUC.xaml.vb

@@ -0,0 +1,55 @@
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+Imports EgtUILib
+Imports EgtWPFLib
+Imports EgtWPFLib5
+
+Public Class WaterJetPageUC
+
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterjetDbWindowVM As EgtWPFLib5.WaterjetDbWindowVM
+   Private m_sOrigNewMaterial As String = String.Empty
+   Private m_sOrigNewSubMaterial As String = String.Empty
+
+   Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
+      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      Me.DataContext = m_refWaterjetDbWindowVM
+      EgtWPFLib.Utility.MainWindow = m_MainWindow
+   End Sub
+
+   Public Sub WaterJetPage_Reinitialize()
+      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      Me.DataContext = m_refWaterjetDbWindowVM
+   End Sub
+
+   Private Sub NewMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtOpening
+      m_sOrigNewMaterial = NewMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewSubMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtOpening
+      m_sOrigNewSubMaterial = NewSubMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewMaterial = NewMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewMaterial) OrElse m_refWaterjetDbWindowVM.sNewMaterial = m_sOrigNewMaterial Then
+         m_refWaterjetDbWindowVM.NewMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+   Private Sub NewSubMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewSubMaterial = NewSubMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewSubMaterial) OrElse m_refWaterjetDbWindowVM.sNewSubMaterial = m_sOrigNewSubMaterial Then
+         m_refWaterjetDbWindowVM.NewSubMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewSubMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+End Class
+

Machine/WaterJetPageVM.vb

@@ -0,0 +1,891 @@
+'Imports System.Collections.ObjectModel
+'Imports System.ComponentModel
+'Imports EgtUILib
+'Imports EgtWPFLib
+
+'Public Class WaterJetPageVM
+'   Private m_refWaterPageV As WaterJetPageUC
+
+'   ' lista dei materiali
+'   Private m_ListMaterial As New ObservableCollection(Of MaterialWJ)
+'   Public ReadOnly Property ListMaterial As ObservableCollection(Of MaterialWJ)
+'      Get
+'         Return m_ListMaterial
+'      End Get
+'   End Property
+'   ' materiale selezionato
+'   Private m_SelectedMaterial As MaterialWJ
+'   Public Property SelectedMaterial As MaterialWJ
+'      Get
+'         Return m_SelectedMaterial
+'      End Get
+'      Set(value As MaterialWJ)
+'         m_SelectedMaterial = value
+'      End Set
+'   End Property
+'   ' submateriale selezionato
+'   Private m_SelectedSubMaterial As SubMaterialWJ
+'   Public Property SelectedSubMaterial As SubMaterialWJ
+'      Get
+'         Return m_SelectedSubMaterial
+'      End Get
+'      Set(value As SubMaterialWJ)
+'         m_SelectedSubMaterial = value
+'      End Set
+'   End Property
+'   ' lista parametri selezionata
+'   Private m_SelectedParam As ParamWJ
+'   Public Property SelectedParam As ParamWJ
+'      Get
+'         Return m_SelectedParam
+'      End Get
+'      Set(value As ParamWJ)
+'         m_SelectedParam = value
+'      End Set
+'   End Property
+
+'   Private m_sNewMaterial As MaterialWJ
+'   Public Property sNewMaterial As String
+'      Get
+'         Return m_sNewMaterial.sMaterial
+'      End Get
+'      Set(value As String)
+'         m_sNewMaterial = New MaterialWJ(value)
+'      End Set
+'   End Property
+
+'   Private m_NewMaterialVisibility As Visibility = Visibility.Hidden
+'   Public Property NewMaterialVisibility As Visibility
+'      Get
+'         Return m_NewMaterialVisibility
+'      End Get
+'      Set(value As Visibility)
+'         m_NewMaterialVisibility = value
+'      End Set
+'   End Property
+
+'   Sub New(WaterJetPageV As WaterJetPageUC)
+'      m_refWaterPageV = WaterJetPageV
+'      ' Creo una lista di materiali come esempio
+'      ListMaterial.Add(New MaterialWJ("Marmo"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("10", "Bq1", "Bq2", "Bq3", "Bq4", "Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("20", "Nq1", "Nq2", "Nq3", "Nq4", "Nq5"))
+'      ListMaterial.Add(New MaterialWJ("Granito"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15", "gBq1", "gBq2", "Bq3", "gBq4", "gBq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.5", "g_Bq1", "g_Bq2", "g_Bq3", "g_Bq4", "g_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.8", "G_Bq1", "G_Bq2", "G_Bq3", "G_Bq4", "G_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("18", "gNq1", "gNq2", "gNq3", "gNq4", "gNq5"))
+
+'      SelectedMaterial = m_ListMaterial(0)
+'      SelectedSubMaterial = m_SelectedMaterial.ListOfSubMaterial(0)
+'      SelectedParam = SelectedSubMaterial.ListOfParam(0)
+'   End Sub
+
+'   Private m_cmdOk As ICommand
+'   Public ReadOnly Property OkCommand() As ICommand
+'      Get
+'         If m_cmdOk Is Nothing Then
+'            m_cmdOk = New Command(AddressOf Ok)
+'         End If
+'         Return m_cmdOk
+'      End Get
+'   End Property
+
+'   Private Sub Ok()
+'      ' Mostro textbox per il nome
+'      m_refWaterPageV.KitNameTxBx.Text = String.Empty
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Visible
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 1)
+'      MessageBox.Show("Prova di Binding", "Prova di Binding", MessageBoxButton.OK, MessageBoxImage.Asterisk, MessageBoxResult.OK)
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Hidden
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 2)
+'   End Sub
+
+'End Class
+
+
+'Public Class MaterialWJ
+
+'   Private m_sMaterial As String = String.Empty
+'   Public ReadOnly Property sMaterial As String
+'      Get
+'         Return m_sMaterial
+'      End Get
+'   End Property
+
+'   Private m_ListOfSubMaterial As New ObservableCollection(Of SubMaterialWJ)
+'   Public Property ListOfSubMaterial As ObservableCollection(Of SubMaterialWJ)
+'      Get
+'         Return m_ListOfSubMaterial
+'      End Get
+'      Set(value As ObservableCollection(Of SubMaterialWJ))
+'         m_ListOfSubMaterial = value
+'      End Set
+'   End Property
+
+'   Sub New(sMat As String)
+'      m_sMaterial = sMat
+'   End Sub
+
+'End Class
+
+'Public Class SubMaterialWJ
+
+'   Dim m_sSubMaterial As String
+'   Public Property sSubMaterial As String
+'      Get
+'         Return m_sSubMaterial
+'      End Get
+'      Set(value As String)
+'         m_sSubMaterial = value
+'      End Set
+'   End Property
+
+'   Private m_ListOfParam As New ObservableCollection(Of ParamWJ)
+'   Public Property ListOfParam As ObservableCollection(Of ParamWJ)
+'      Get
+'         Return m_ListOfParam
+'      End Get
+'      Set(value As ObservableCollection(Of ParamWJ))
+'         m_ListOfParam = value
+'      End Set
+'   End Property
+
+'   Sub New(sName As String)
+'      m_sSubMaterial = sName
+'   End Sub
+'End Class
+
+'Public Class ParamWJ
+
+'   Private m_Thickness As String
+'   Private m_Q1 As String
+'   Private m_Q2 As String
+'   Private m_Q3 As String
+'   Private m_Q4 As String
+'   Private m_Q5 As String
+
+'   Public Property Q1 As String
+'      Get
+'         Return m_Q1
+'      End Get
+'      Set(value As String)
+'         m_Q1 = value
+'      End Set
+'   End Property
+
+'   Public Property Thickness As String
+'      Get
+'         Return m_Thickness
+'      End Get
+'      Set(value As String)
+'         m_Thickness = value
+'      End Set
+'   End Property
+
+'   Public Property Q2 As String
+'      Get
+'         Return m_Q2
+'      End Get
+'      Set(value As String)
+'         m_Q2 = value
+'      End Set
+'   End Property
+
+'   Public Property Q3 As String
+'      Get
+'         Return m_Q3
+'      End Get
+'      Set(value As String)
+'         m_Q3 = value
+'      End Set
+'   End Property
+
+'   Public Property Q4 As String
+'      Get
+'         Return m_Q4
+'      End Get
+'      Set(value As String)
+'         m_Q4 = value
+'      End Set
+'   End Property
+
+'   Public Property Q5 As String
+'      Get
+'         Return m_Q5
+'      End Get
+'      Set(value As String)
+'         m_Q5 = value
+'      End Set
+'   End Property
+
+'   Sub New(sT As String, sQ1 As String, sQ2 As String, sQ3 As String, sQ4 As String, sQ5 As String)
+'      m_Thickness = sT
+'      m_Q1 = sQ1
+'      m_Q2 = sQ2
+'      m_Q3 = sQ3
+'      m_Q4 = sQ4
+'      m_Q5 = sQ5
+'   End Sub
+
+'End Class
+
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class WaterjetDbWindowVM
+   Inherits VMBase
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterPageV As WaterJetPageUC
+
+#Region "FIELDS & PROPERTIES"
+
+
+#Region "Materiali"
+   Private Property m_MaterialList As ObservableCollection(Of WjMaterial)
+   Public Property MaterialList As ObservableCollection(Of WjMaterial)
+      Get
+         Return m_MaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjMaterial))
+         m_MaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelMaterial As WjMaterial
+   Public Property SelMaterial As WjMaterial
+      Get
+         Return m_SelMaterial
+      End Get
+      Set(value As WjMaterial)
+         m_SelMaterial = value
+      End Set
+   End Property
+
+   Private Property m_sNewMaterial As String
+   Public Property sNewMaterial As String
+      Get
+         Return m_sNewMaterial
+      End Get
+      Set(value As String)
+         m_sNewMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewMaterial_Visibility As Visibility
+      Get
+         Return m_NewMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "SubMateriali"
+   Private Property m_SubMaterialList As New ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   'Private Property m_SelSubMaterial As WjSubMaterial
+   'Public Property SelSubMaterial As WjSubMaterial
+   '   Get
+   '      Return m_SelSubMaterial
+   '   End Get
+   '   Set(value As WjSubMaterial)
+   '      m_SelSubMaterial = value
+   '   End Set
+   'End Property
+
+   Private Property m_sNewSubMaterial As String
+   Public Property sNewSubMaterial As String
+      Get
+         Return m_sNewSubMaterial
+      End Get
+      Set(value As String)
+         m_sNewSubMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewSubMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewSubMaterial_Visibility As Visibility
+      Get
+         Return m_NewSubMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewSubMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewSubMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "Parametri"
+   Private Property m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   'Private Property m_SelParam As WjParam
+   'Public Property SelParam As WjParam
+   '   Get
+   '      Return m_SelParam
+   '   End Get
+   '   Set(value As WjParam)
+   '      m_SelParam = value
+   '   End Set
+   'End Property
+
+   Private m_HeadParamLstBx_Width As Double
+   Public ReadOnly Property HeadParamLstBx_Width As Double
+      Get
+         If m_HeadParamLstBx_Width < 10 Then
+            Return 700
+         End If
+         Return m_HeadParamLstBx_Width
+      End Get
+   End Property
+
+#End Region
+
+   Const S_MATERIALS As String = "Materials"
+
+   ' Definizione comandi
+   Private m_cmdNewMaterial As ICommand
+   Private m_cmdDeleteMaterial As ICommand
+   Private m_cmdNewSubMaterial As ICommand
+   Private m_cmdDeleteSubMaterial As ICommand
+   Private m_cmdNewWjParam As ICommand
+   Private m_cmdDeleteWjParam As ICommand
+   Private m_cmdSave As ICommand
+   Private m_cmdDone As ICommand
+
+#End Region
+
+#Region "MESSAGES"
+
+   Public ReadOnly Property Material_Msg As String
+      Get
+         Return "Materiale"
+      End Get
+   End Property
+
+   Public ReadOnly Property SubMaterial_Msg As String
+      Get
+         Return "SubMateriale"
+      End Get
+   End Property
+
+   Public ReadOnly Property Id_Msg As String
+      Get
+         Return "Id"
+      End Get
+   End Property
+
+   Public ReadOnly Property Thickness_Msg As String
+      Get
+         Return "Spessore"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q1_Msg As String
+      Get
+         Return "Q1"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q2_Msg As String
+      Get
+         Return "Q2"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q3_Msg As String
+      Get
+         Return "Q3"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q4_Msg As String
+      Get
+         Return "Q4"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q5_Msg As String
+      Get
+         Return "Q5"
+      End Get
+   End Property
+
+   Public ReadOnly Property QExtra_Msg As String
+      Get
+         Return "QExtra"
+      End Get
+   End Property
+
+   Public ReadOnly Property New_Msg As String
+      Get
+         Return "Nuovo"
+      End Get
+   End Property
+
+   Public ReadOnly Property Delete_Msg As String
+      Get
+         Return "Elimina"
+      End Get
+   End Property
+
+   Public ReadOnly Property Save_Msg As String
+      Get
+         Return "Salva"
+      End Get
+   End Property
+
+   Public ReadOnly Property Modify_Msg As String
+      Get
+         Return "Modifica"
+      End Get
+   End Property
+
+#End Region
+
+#Region "CONSTRUCTOR"
+
+   Sub New(refContext As WaterJetPageUC)
+      ' definisco il riferiento con la pagina xaml
+      m_refWaterPageV = refContext
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = m_MainWindow.m_CurrentMachine.sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      MaterialList = New ObservableCollection(Of WjMaterial)
+
+      If File.Exists(sFilePath) Then
+         Dim sMaterial As String = String.Empty
+
+         If EgtUILib.GetPrivateProfileString(S_MATERIALS, "1", "", sMaterial, sFilePath) > 0 Then
+            Dim sMaterials() As String = sMaterial.Split(","c)
+            Dim ind As Integer = 0
+            For ind = 0 To sMaterials.Length() - 1
+
+               'recupero i sottomateriali
+               Dim Index As Integer = 1
+               Dim sSubMat As String = String.Empty
+               Dim SubMatList As New ObservableCollection(Of WjSubMaterial)
+               While EgtUILib.GetPrivateProfileString(sMaterials(ind), Index.ToString(), "", sSubMat, sFilePath) > 0
+
+
+                  ' recupero la lista dei Q
+                  Dim QInd As Integer = 1
+                  Dim sParam As String = String.Empty
+                  Dim QParamList As New ObservableCollection(Of WjParam)
+                  While EgtUILib.GetPrivateProfileString(sMaterials(ind) & "." & sSubMat, QInd.ToString(), "", sParam, sFilePath) > 0
+                     Dim sParams() As String = sParam.Split(","c)
+                     If sParams.Length() >= 7 Then
+                        Dim dThickness As Double
+                        Dim dQ1 As Double
+                        Dim dQ2 As Double
+                        Dim dQ3 As Double
+                        Dim dQ4 As Double
+                        Dim dQ5 As Double
+                        Dim dQExtra As Double
+                        StringToDouble(sParams(0), dThickness)
+                        StringToDouble(sParams(1), dQ1)
+                        StringToDouble(sParams(2), dQ2)
+                        StringToDouble(sParams(3), dQ3)
+                        StringToDouble(sParams(4), dQ4)
+                        StringToDouble(sParams(5), dQ5)
+                        StringToDouble(sParams(6), dQExtra)
+                        QParamList.Add(New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV))
+                     End If
+                     QInd += 1
+                  End While
+
+                  SubMatList.Add(New WjSubMaterial(sSubMat, QParamList))
+                  Index += 1
+               End While
+
+               MaterialList.Add(New WjMaterial(sMaterials(ind), SubMatList))
+            Next
+
+         End If
+
+      End If
+
+   End Sub
+
+   Public Sub RefreshDImensionPage()
+      m_HeadParamLstBx_Width = m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      NotifyPropertyChanged(NameOf(HeadParamLstBx_Width))
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "COMMANDS"
+
+#Region "NewMaterialCommand"
+
+   Public ReadOnly Property NewMaterialCommand As ICommand
+      Get
+         If m_cmdNewMaterial Is Nothing Then
+            m_cmdNewMaterial = New Command(AddressOf NewMaterial)
+         End If
+         Return m_cmdNewMaterial
+      End Get
+   End Property
+
+   Public Sub NewMaterial(ByVal param As Object)
+      NewSubMaterial_Visibility = Visibility.Collapsed
+      NewMaterial_Visibility = Visibility.Visible
+   End Sub
+
+#End Region ' NewMaterial
+
+#Region "DeleteMaterialCommand"
+
+   Public ReadOnly Property DeleteMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteMaterial Is Nothing Then
+            m_cmdDeleteMaterial = New Command(AddressOf DeleteMaterial)
+         End If
+         Return m_cmdDeleteMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         MaterialList.Remove(SelMaterial)
+         'SelMaterial.NotifyPropertyChanged(NameOf(MaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteMaterial
+
+#Region "NewSubMaterialCommand"
+
+   Public ReadOnly Property NewSubMaterialCommand As ICommand
+      Get
+         If m_cmdNewSubMaterial Is Nothing Then
+            m_cmdNewSubMaterial = New Command(AddressOf NewSubMaterial)
+         End If
+         Return m_cmdNewSubMaterial
+      End Get
+   End Property
+
+   Public Sub NewSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         NewMaterial_Visibility = Visibility.Collapsed
+         NewSubMaterial_Visibility = Visibility.Visible
+
+      End If
+   End Sub
+
+#End Region ' NewSubMaterial
+
+#Region "DeleteSubMaterialCommand"
+
+   Public ReadOnly Property DeleteSubMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteSubMaterial Is Nothing Then
+            m_cmdDeleteSubMaterial = New Command(AddressOf DeleteSubMaterial)
+         End If
+         Return m_cmdDeleteSubMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         SelMaterial.SubMaterialList.Remove(SelMaterial.SelSubMaterial)
+         SelMaterial.NotifyPropertyChanged(NameOf(SubMaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteSubMaterial
+
+#Region "NewWjParamCommand"
+
+   Public ReadOnly Property NewWjParamCommand As ICommand
+      Get
+         If m_cmdNewWjParam Is Nothing Then
+            m_cmdNewWjParam = New Command(AddressOf NewWjParam)
+         End If
+         Return m_cmdNewWjParam
+      End Get
+   End Property
+
+   Public Sub NewWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         Dim nId As Integer = 0
+         If IsNothing(SelMaterial.SelSubMaterial.ParamList) Then
+            nId = 1
+            SelMaterial.SelSubMaterial.ParamList = New ObservableCollection(Of WjParam)
+         Else
+            nId = SelMaterial.SelSubMaterial.ParamList.Count + 1
+         End If
+         SelMaterial.SelSubMaterial.ParamList.Add(New WjParam(nId, 0, 0, 0, 0, 0, 0, 0, m_refWaterPageV))
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' NewWjParam
+
+#Region "DeleteWjParamCommand"
+
+   Public ReadOnly Property DeleteWjParamCommand As ICommand
+      Get
+         If m_cmdDeleteWjParam Is Nothing Then
+            m_cmdDeleteWjParam = New Command(AddressOf DeleteWjParam)
+         End If
+         Return m_cmdDeleteWjParam
+      End Get
+   End Property
+
+   Public Sub DeleteWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial.SelWjParam) Then
+         SelMaterial.SelSubMaterial.ParamList.Remove(SelMaterial.SelSubMaterial.SelWjParam)
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' DeleteWjParam
+
+#Region "DoneCommand"
+
+   Public ReadOnly Property DoneCommand As ICommand
+      Get
+         If m_cmdDone Is Nothing Then
+            m_cmdDone = New Command(AddressOf Done)
+         End If
+         Return m_cmdDone
+      End Get
+   End Property
+
+   Public Sub Done(ByVal param As Object)
+      If NewMaterial_Visibility = Visibility.Visible Then
+         MaterialList.Add(New WjMaterial(sNewMaterial))
+         NotifyPropertyChanged(NameOf(MaterialList))
+         NewMaterial_Visibility = Visibility.Collapsed
+      ElseIf NewSubMaterial_Visibility = Visibility.Visible Then
+         SelMaterial.SubMaterialList.Add(New WjSubMaterial(sNewSubMaterial))
+         NotifyPropertyChanged(NameOf(SubMaterialList))
+         NewSubMaterial_Visibility = Visibility.Collapsed
+      End If
+   End Sub
+
+#End Region ' Done
+
+#End Region    ' Commands
+
+End Class
+
+Public Class WjMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_SubMaterialList As ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelSubMaterial As WjSubMaterial
+   Public Property SelSubMaterial As WjSubMaterial
+      Get
+         Return m_SelSubMaterial
+      End Get
+      Set(value As WjSubMaterial)
+         m_SelSubMaterial = value
+      End Set
+   End Property
+
+   Sub New(sName As String, SubMatList As ObservableCollection(Of WjSubMaterial))
+      m_Name = sName
+      m_SubMaterialList = SubMatList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjSubMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   Private Property m_SelWjParam As WjParam
+   Public Property SelWjParam As WjParam
+      Get
+         Return m_SelWjParam
+      End Get
+      Set(value As WjParam)
+         m_SelWjParam = value
+      End Set
+   End Property
+
+   Sub New(sName As String, ParamList As ObservableCollection(Of WjParam))
+      m_Name = sName
+      m_ParamList = ParamList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjParam
+
+   Private m_Id As Integer
+   Public Property Id As Integer
+      Get
+         Return m_Id
+      End Get
+      Set(value As Integer)
+         m_Id = value
+      End Set
+   End Property
+
+   Private m_Thickness As Double
+   Public Property Thickness As Double
+      Get
+         Return m_Thickness
+      End Get
+      Set(value As Double)
+         m_Thickness = value
+      End Set
+   End Property
+
+   Private m_Q1 As Double
+   Public Property Q1 As Double
+      Get
+         Return m_Q1
+      End Get
+      Set(value As Double)
+         m_Q1 = value
+      End Set
+   End Property
+
+   Private m_Q2 As Double
+   Public Property Q2 As Double
+      Get
+         Return m_Q2
+      End Get
+      Set(value As Double)
+         m_Q2 = value
+      End Set
+   End Property
+
+   Private m_Q3 As Double
+   Public Property Q3 As Double
+      Get
+         Return m_Q3
+      End Get
+      Set(value As Double)
+         m_Q3 = value
+      End Set
+   End Property
+
+   Private m_Q4 As Double
+   Public Property Q4 As Double
+      Get
+         Return m_Q4
+      End Get
+      Set(value As Double)
+         m_Q4 = value
+      End Set
+   End Property
+
+   Private m_Q5 As Double
+   Public Property Q5 As Double
+      Get
+         Return m_Q5
+      End Get
+      Set(value As Double)
+         m_Q5 = value
+      End Set
+   End Property
+
+   Private m_QExtra As Double
+   Public Property QExtra As Double
+      Get
+         Return m_QExtra
+      End Get
+      Set(value As Double)
+         m_QExtra = value
+      End Set
+   End Property
+
+   Public ReadOnly Property ParamLstBx_Width As Double
+      Get
+         Return m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      End Get
+   End Property
+
+   Private m_refWaterPageV As WaterJetPageUC
+
+   Sub New(nId As Integer, dThickness As Double, dQ1 As Double, dQ2 As Double, dQ3 As Double, dQ4 As Double, dQ5 As Double, dQExtra As Double, ByRef refWJPage As WaterJetPageUC)
+      m_Id = nId
+      m_Thickness = dThickness
+      m_Q1 = dQ1
+      m_Q2 = dQ2
+      m_Q3 = dQ3
+      m_Q4 = dQ4
+      m_Q5 = dQ5
+      m_QExtra = dQExtra
+      m_refWaterPageV = refWJPage
+   End Sub
+
+End Class

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2305, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2305, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2312, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2312, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -433,7 +433,8 @@ Class MainWindow
       End If
 
       ' abilito il bottone per la gestione del comando di Check-Up-Start (posziona lama prelavorazione)
-      If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 Then
+      If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
+         Not File.Exists( m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
@@ -1067,6 +1068,15 @@ Class MainWindow
             If Not m_MachinePageUC.m_PolishingsPageUC.SaveKit() Then
                Return False
             End If
+         Case MachinePageUC.MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+               Return False
+            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+               m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
       End Select
       Return True
    End Function
@@ -1093,12 +1103,15 @@ Class MainWindow
       If m_bNCLink And m_CurrentMachine.bProdLine Then
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
+      ElseIf m_CurrentMachine.bDemo Then
+         m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_ProdLineTimer.Start()
       End If
 
       ' seleziono il tipo di avvio
-      'm_CurrentProjectPageUC.StartProgram()
+      m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
-      EgtDraw()
+      EgtZoom(ZM.ALL, True)
    End Sub
 
    Friend Sub EgtWPFInit()
@@ -1126,7 +1139,8 @@ Class MainWindow
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1153,7 +1167,7 @@ Class MainWindow
          m_CNCommunication.m_CN.n_DReadELS_handle = 0
          m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjFinished, 1)
          Dim nVarFin As Integer = 0
-         For I = 1 To 4
+         For I As Integer = 1 To 4
             System.Threading.Thread.Sleep(50)
             If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
                nVarFin = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
@@ -1193,7 +1207,7 @@ Class MainWindow
                nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
                nMove = 1
             End If
-         ' altrimenti forzo trasmissione ultimo inviato
+            ' altrimenti forzo trasmissione ultimo inviato
          Else
             nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
             nMove = 1
@@ -1215,13 +1229,17 @@ Class MainWindow
       m_CNCommunication.m_CN.n_DReadELS_handle = 0
       m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjCopy, 1)
       Dim nVarCopy As Integer = 0
-      For I = 1 To 10
+      For I As Integer = 1 To 10
          System.Threading.Thread.Sleep(50)
          If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
             nVarCopy = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
             Exit For
          End If
       Next
+
+      ' forzo la variabile CN - aggiornando il valore dell'indice del progetto in elaborazione
+      If m_CurrentMachine.bDemo Then nVarCopy = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, GetIniFile())
+
       ' Leggo variabile con ultimo progetto mandato a OmagView
       Dim nLastCopy As Integer = GetPrivateProfileInt(S_GENERAL, K_LASTPROJTOVIEW, 0, GetIniFile())
       ' Se non nulla e diversa da ultimo copiato, verifico se eseguire la copia
@@ -1268,7 +1286,7 @@ Class MainWindow
       m_CNCommunication.m_CN.n_DReadELS_handle = 0
       m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sProdLiProbingStateVar(nI), 1)
       Dim nProbingState As Integer = 0
-      For I = 1 To 5
+      For I As Integer = 1 To 5
          System.Threading.Thread.Sleep(20)
          If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
             nProbingState = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
@@ -1281,7 +1299,7 @@ Class MainWindow
       If m_CurrentMachine.sProdLiProbingTcPosVar(nI) <> "0" Then
          m_CNCommunication.m_CN.n_DReadELS_handle = 0
          m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sProdLiProbingTcPosVar(nI), 1)
-         For I = 1 To 5
+         For I As Integer = 1 To 5
             System.Threading.Thread.Sleep(20)
             If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
                nTcPos = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
@@ -1296,7 +1314,7 @@ Class MainWindow
       m_CNCommunication.m_CN.n_DReadELS_handle = 0
       m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sProdLiSawDiameterVar(nI), 1)
       Dim dDiam As Double = 0
-      For I = 1 To 5
+      For I As Integer = 1 To 5
          System.Threading.Thread.Sleep(20)
          If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
             dDiam = m_CNCommunication.m_CN.d_DReadELS_value

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("EgalTech s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2021 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2022 by EgalTech s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.5.1")>
-<Assembly: AssemblyFileVersion("2.3.5.1")>
+<Assembly: AssemblyVersion("2.4.1.1")>
+<Assembly: AssemblyFileVersion("2.4.1.1")>

NcComm/CNCommunication.vb

@@ -11,6 +11,8 @@ Public Class CNCommunication
    Private m_AlarmsPage As AlarmsPageUC = m_MainWindow.m_MachinePageUC.m_AlarmsPageUC
    Private m_CurrProjPage As CurrentProjectPageUC = m_MainWindow.m_CurrentProjectPageUC
 
+   Friend m_nCountRefresh As Integer = 0
+
    ' Variabile per tipologia CN
    Friend m_nNCType As Integer
 
@@ -225,8 +227,11 @@ Public Class CNCommunication
 
          ' definisco il tipo di varibili che devono essere scritte nl plc
          Dim sVal As String = String.Empty
-         GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
-         m_CN.m_NewVariable = sVal <> 0
+         Dim nVal As Integer = 0
+         'GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWVARIABLE, nVal, m_MainWindow.GetMachIniFile())
+         'm_CN.m_NewVariable = sVal <> "0"
+         m_CN.m_NewVariable = (nVal <> 0)
          EgtOutLog("NewVariable=" & If(m_CN.m_NewVariable, "1", "0"))
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
@@ -325,21 +330,24 @@ Public Class CNCommunication
          GetPrivateProfileString(S_NCDATA, K_BYPASSTATE, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
 
-         ' nuove variabili
-         m_IsNewConsole = GetPrivateProfileString(S_NCDATA, K_NEWCONSOLE, "", sVal, m_MainWindow.GetMachIniFile())
+         ' nuove variabili: stato dei nuovi pulsanti
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
+         m_IsNewConsole = (nVal = 1)
          If m_IsNewConsole Then
-            GetPrivateProfileString(S_NCDATA, K_XYAXES, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.XYAxes, sVal)
-            GetPrivateProfileString(S_NCDATA, K_ZAXES, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.ZAxes, sVal)
-            GetPrivateProfileString(S_NCDATA, K_BCAxes, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.BCAxes, sVal)
+            GetPrivateProfileString(S_NCDATA, K_XYJOG, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.XYJog, sVal)
+            GetPrivateProfileString(S_NCDATA, K_ZCJOG, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZCJog, sVal)
+            GetPrivateProfileString(S_NCDATA, K_ZBJOG, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZBJog, sVal)
             GetPrivateProfileString(S_NCDATA, K_POWERON, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            GetPrivateProfileString(S_NCDATA, K_REMOTE, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-         ' Inizializzo la comunicazione
-         m_CN.Init()
+            ' Inizializzo la comunicazione
+            m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -373,6 +381,7 @@ Public Class CNCommunication
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
+                  m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
                      ' stati bottoni parte 1
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
@@ -389,6 +398,8 @@ Public Class CNCommunication
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
 
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+                  ElseIf m_CN.m_IsActiveModeSubscription Then
+                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
                Catch ex As Exception
                   EgtOutLog("Error starting Process -> NcLink=True type=0")
@@ -488,7 +499,7 @@ Public Class CNCommunication
       If m_CN.b_NC_error Then
          ErrorList.Clear()
          SyncLock m_CN
-            For Each Item In m_CN.sz_NC_error_messages
+            For Each Item As String In m_CN.sz_NC_error_messages
                ErrorList.Add(Item)
             Next
          End SyncLock
@@ -555,9 +566,10 @@ Public Class CNCommunication
 
             ' Nuovi bottoni (uso joystick)
             If m_IsNewConsole Then
-               m_MainWindow.m_DirectCutPageUC.XYAxesChanged(m_CN.bXYAxes)
-               m_MainWindow.m_DirectCutPageUC.ZAxesChanged(m_CN.bZAxes)
-               m_MainWindow.m_DirectCutPageUC.BCAxesChanged(m_CN.bBCAxes)
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -575,9 +587,10 @@ Public Class CNCommunication
 
             ' Nuovi bottoni (uso joystick) per Area4
             If m_IsNewConsole Then
-               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYAxesChanged(m_CN.bXYAxes)
-               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZAxesChanged(m_CN.bZAxes)
-               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCAxesChanged(m_CN.bBCAxes)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
             End If
 
          End If
@@ -590,6 +603,7 @@ Public Class CNCommunication
       ' Nuove bottoni (Power Macchina)
       If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
          m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
       End If
 
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
@@ -689,18 +703,23 @@ Public Class CNCommunication
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
 
-      Dim TempCurrMode As Short = m_CN.read_active_mode()
-      'EgtOutLog("Machine status: " & TempCurrMode)
-      If TempCurrMode <> m_nCurrMode Then
-         'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
-         m_nCurrMode = CInt(TempCurrMode)
-         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+      If m_nCountRefresh > 10 Then
+         Dim TempCurrMode As Short = m_CN.read_active_mode()
+         'EgtOutLog("Machine status: " & TempCurrMode)
+         If TempCurrMode <> m_nCurrMode Then
+            'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+            m_nCurrMode = CInt(TempCurrMode)
+            m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         End If
+         m_nCountRefresh = 0
+      Else
+         m_nCountRefresh = m_nCountRefresh + 1
       End If
 
       If m_CN.b_NC_error Then
          ErrorList.Clear()
          SyncLock m_CN
-            For Each Item In m_CN.sz_NC_error_messages
+            For Each Item As String In m_CN.sz_NC_error_messages
                ErrorList.Add(Item)
             Next
          End SyncLock

NcComm/CN_Siemens.vb

@@ -131,8 +131,7 @@ Public Class CN_Siemens
 
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
-      'Return M_MMFiles.read_active_mode()
-      If m_IsSiemensOne Then
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
          Select Case n_data(3)
             Case 1
                Return 0
@@ -144,7 +143,10 @@ Public Class CN_Siemens
                Return 0
          End Select
       Else
-         Return CShort(M_MMFiles.SiemensRet.n_param2)
+         ' per verificare che la comunicazione funzioni correttamente
+         EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
+         Return M_MMFiles.read_active_mode()
+         'Return CShort(M_MMFiles.SiemensRet.n_param2)
       End If
    End Function
 

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 50                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 52                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -61,10 +61,11 @@ Public MustInherit Class CN_generico
       VacuumOff = 45
       LaserTrac = 46
 
-      XYAxes = 47
-      ZAxes = 48
-      BCAxes = 49
+      XYJog = 47
+      ZCJog = 48
+      ZBJog = 49
       PowerON = 50
+      Remote = 51
    End Enum
 
 #End Region
@@ -87,6 +88,8 @@ Public MustInherit Class CN_generico
 #Region " Interface"
 
    Friend m_IsSiemensOne As Boolean = False
+   Friend m_IsActiveModeSubscription As Boolean = False
+
    Friend m_DbVarPath As String = ""
 
    Public IsFlexiumPlus As Boolean = False
@@ -200,11 +203,12 @@ Public MustInherit Class CN_generico
    Public bSpeedHold As Boolean
 
    ' Nuovi di bottoni -------------------------------------------
-   Public bXYAxes As Boolean
-   Public bZAxes As Boolean
-   Public bBCAxes As Boolean
+   Public bXYJog As Boolean
+   Public bZCJog As Boolean
+   Public bZBCJog As Boolean
 
    Public bPowerON As Boolean
+   Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
    Public nMachineMode As Integer

NcComm/M_MMFiles.vb

@@ -398,13 +398,35 @@ Module M_MMFiles
    End Function
 
    Function WriteCncMode(ByVal nmode As Short) As Short
-      'EgtOutLog("WriteCncMode start dell'm_mmFiles")
-      SiemensSend.n_Command = CMD.CMD_WriteCncMode
-      SiemensSend.n_param1 = nmode
-
-      execute_command()
-      'EgtOutLog("WriteCncMode end dell'm_mmFiles")
-      Return SiemensRet.n_result
+      Dim nNewWriteCNCMode As Integer = 0
+      If GetPrivateProfileInt(S_NCSIEMENS, K_NEWWRITECNCMODE, nNewWriteCNCMode, m_MainWindow.GetMachIniFile()) <> 0 Then
+         Dim s_var As String = String.Empty
+         GetPrivateProfileString(S_NCDATA, K_WRITECNCMODEVAR, "db11.dbx0", s_var, m_MainWindow.GetMachIniFile())
+         Select Case nmode
+            Case 0
+               ' Auto
+               s_var &= ".0"
+            Case 2
+               ' MDI
+               s_var &= ".1"
+            Case 7
+               ' manuale
+               s_var &= ".2"
+            Case Else
+               ' manuale
+               s_var &= ".2"
+         End Select
+         EgtOutLog("Nuova scrittura modo: case(" & nmode.ToString & ") -> " & s_var)
+         Return Write_var(s_var, CShort(1), CInt(1), 0, 0, "")
+      Else
+         'EgtOutLog("WriteCncMode start dell'm_mmFiles")
+         SiemensSend.n_Command = CMD.CMD_WriteCncMode
+         SiemensSend.n_param1 = nmode
+         EgtOutLog("Attivata modalità: " & SiemensSend.n_param1.ToString)
+         execute_command()
+         'EgtOutLog("WriteCncMode end dell'm_mmFiles")
+         Return SiemensRet.n_result
+      End If
 
    End Function
 
@@ -454,6 +476,7 @@ Module M_MMFiles
       SiemensSend.n_param1 = nChannel
 
       execute_command()
+
       'EgtOutLog("MDI_command end dell'm_mmFiles")
       Return SiemensRet.n_result
 
@@ -592,7 +615,6 @@ Module M_MMFiles
    '----------------------------------------------------------------------------------------------------------
    '
    Sub execute_command()
-
       Try
          ' Attesa eventuale busy iniziale
          Dim nCount As Integer = 0
@@ -619,25 +641,25 @@ Module M_MMFiles
          bEnd = False
          While Not bEnd
             Select Case nState
-            Case State.Command_on              ' alzato il comando attendo il busy
-               If SiemensRet.b_busy Then
-                  nState = State.Busy_On
-               Else
-                  System.Threading.Thread.Sleep(50)
-               End If
-            Case State.Busy_On                 ' trovato il busy abbasso il comando
-               SiemensSend.n_Flag = COMMAND_OFF ' abbasso il comando
-               ' scrivo !!!!!
-               Marshal.StructureToPtr(SiemensSend, pView, False)
-               nState = State.Command_off
-            Case State.Command_off             ' abbassato il comando attendo il busy basso
-               If SiemensRet.b_busy Then
-                  System.Threading.Thread.Sleep(50)
-               Else
-                  nState = State.Busy_Off
-               End If
-            Case State.Busy_Off
-               bEnd = True
+               Case State.Command_on              ' alzato il comando attendo il busy
+                  If SiemensRet.b_busy Then
+                     nState = State.Busy_On
+                  Else
+                     System.Threading.Thread.Sleep(50)
+                  End If
+               Case State.Busy_On                 ' trovato il busy abbasso il comando
+                  SiemensSend.n_Flag = COMMAND_OFF ' abbasso il comando
+                  ' scrivo !!!!!
+                  Marshal.StructureToPtr(SiemensSend, pView, False)
+                  nState = State.Command_off
+               Case State.Command_off             ' abbassato il comando attendo il busy basso
+                  If SiemensRet.b_busy Then
+                     System.Threading.Thread.Sleep(50)
+                  Else
+                     nState = State.Busy_Off
+                  End If
+               Case State.Busy_Off
+                  bEnd = True
             End Select
             ' controllo massimo numero di cicli
             nCount += 1
@@ -719,11 +741,12 @@ Module M_MMFiles
          Next
 
          ' Copia variabili R
-         For n = 0 To (N_R_VAR - 1)
+         For n As Integer = 0 To (N_R_VAR - 1)
             CurrCN.d_Dvariable_values(n) = SiemensRet.d_interf_variable_values(n)
          Next
 
-         ' copy spindle current
+         ' copy spindle current: per debuggare errore di comunicazione 
+         'EgtOutLog("Spindle -d_interf_spindle_power-: " & SiemensRet.d_interf_spindle_power.ToString)
          CurrCN.d_spindle_power = SiemensRet.d_interf_spindle_power
 
          CurrCN.n_spindle_override(0) = SiemensRet.n_interf_spindle_override

NcComm/M_Num.vb

@@ -236,7 +236,7 @@ Namespace Num
          ' Detect and identify the Flexium CNC type
          sz_CncFxIdentifier = objDMainCncData.GetCncIdentifier()
          '           _txtGetCncIdentification.Invoke(DirectCast(Sub() _txtGetCncIdentification.Text = CncFxIdentifier, MethodInvoker))
-
+         EgtOutLog("Modello Flexium: " & sz_CncFxIdentifier)
          If sz_CncFxIdentifier = "Flexium 6" OrElse sz_CncFxIdentifier = "Flexium 8" OrElse sz_CncFxIdentifier = "Flexium 68" Then
             IsFlexiumPlus = False
          Else
@@ -1077,14 +1077,16 @@ Namespace Num
                Case CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
                   bVacuumOff = CBool(values(n))
 
-               Case CnData.XYAxes     ' (46) 
-                  bXYAxes = CBool(values(n))
-               Case CnData.ZAxes     ' (47)
-                  bZAxes = CBool(values(n))
-               Case CnData.BCAxes     ' (48)
-                  bBCAxes = CBool(values(n))
+               Case CnData.XYJog     ' (46) 
+                  bXYJog = CBool(values(n))
+               Case CnData.ZCJog     ' (47)
+                  bZCJog = CBool(values(n))
+               Case CnData.ZBJog     ' (48)
+                  bZBCJog = CBool(values(n))
                Case CnData.PowerON     ' (49)
                   bPowerON = CBool(values(n))
+               Case CnData.Remote     ' (50)
+                  bRemote = CBool(values(n))
 
             End Select
          Next
@@ -1576,7 +1578,16 @@ Namespace Num
       End Sub
 
       Public Overrides Sub DPlcVariables_WriteVariables(sz_var_names As String, sz_values As String)
-         Dim _ret As Short = objDPlcVariables.WriteVariables(sz_var_names, CShort(sz_values))
+         Dim value As Short = 0
+         If Not Short.TryParse(sz_values, value) Then
+            If Not IsNothing( sz_values) then
+               EgtOutLog("Write variable: " & sz_var_names & ", value:" & sz_values & " failed!")
+            Else
+               EgtOutLog("Write variable: " & sz_var_names & ", value:nothing failed!")
+            End If
+            Return
+         End If
+         Dim _ret As Short = objDPlcVariables.WriteVariables(sz_var_names, value)
          If _ret <> 0 Then
             EgtOutLog("Scrittura " & sz_var_names & " fallita")
          Else

OmagCUT.vbproj

@@ -22,7 +22,7 @@
     <IncrementalBuild>true</IncrementalBuild>
     <OutputPath>bin\Debug\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <WarningsAsErrors>
     </WarningsAsErrors>
   </PropertyGroup>
@@ -36,7 +36,7 @@
     <Optimize>true</Optimize>
     <OutputPath>bin\Release\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <WarningsAsErrors>
     </WarningsAsErrors>
   </PropertyGroup>
@@ -50,7 +50,7 @@
     <OptionStrict>Off</OptionStrict>
   </PropertyGroup>
   <PropertyGroup>
-    <OptionInfer>On</OptionInfer>
+    <OptionInfer>Off</OptionInfer>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
     <DebugSymbols>true</DebugSymbols>
@@ -58,7 +58,7 @@
     <DefineTrace>true</DefineTrace>
     <OutputPath>bin\x86\Debug\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <DebugType>full</DebugType>
     <PlatformTarget>x86</PlatformTarget>
     <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
@@ -70,7 +70,7 @@
     <OutputPath>bin\x86\Release\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
     <Optimize>true</Optimize>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <DebugType>None</DebugType>
     <PlatformTarget>x86</PlatformTarget>
     <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
@@ -96,7 +96,7 @@
     <OutputPath>bin\Trial\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
     <Optimize>true</Optimize>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <DebugType>pdbonly</DebugType>
     <PlatformTarget>AnyCPU</PlatformTarget>
     <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
@@ -105,7 +105,7 @@
     <OutputPath>bin\x86\Trial\</OutputPath>
     <DocumentationFile>OmagCUT.xml</DocumentationFile>
     <Optimize>true</Optimize>
-    <NoWarn>41999,42016,42017,42018,42019,42032,42036</NoWarn>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</NoWarn>
     <DebugType>None</DebugType>
     <PlatformTarget>x86</PlatformTarget>
     <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
@@ -173,6 +173,12 @@
     <Compile Include="DirectCuts\SingleCutAuto.xaml.vb">
       <DependentUpon>SingleCutAuto.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DirectCuts\SingleDrillUC.xaml.vb">
+      <DependentUpon>SingleDrillUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="DrawImport\AlzFrontUC.xaml.vb">
+      <DependentUpon>AlzFrontUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\CompoCsvData.xaml.vb">
       <DependentUpon>CompoCsvData.xaml</DependentUpon>
     </Compile>
@@ -190,8 +196,21 @@
       <DependentUpon>CadCutPageUC.xaml</DependentUpon>
     </Compile>
     <Compile Include="CAM\CamAuto.vb" />
-    <Compile Include="Project\StartLauncheWDr.xaml.vb">
-      <DependentUpon>StartLauncheWDr.xaml</DependentUpon>
+    <Compile Include="Machine\ImportExportMachiningWindowWD.xaml.vb">
+      <DependentUpon>ImportExportMachiningWindowWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Machine\ImportExportToolWD.xaml.vb">
+      <DependentUpon>ImportExportToolWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Machine\WaterJetPageVM.vb" />
+    <Compile Include="Machine\WaterJetPageUC.xaml.vb">
+      <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\StartLauncheWD.xaml.vb">
+      <DependentUpon>StartLauncheWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\CicloStartWD.xaml.vb">
+      <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
@@ -394,6 +413,14 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\SingleDrillUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="DrawImport\AlzFrontUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\CompoCsvData.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -414,7 +441,20 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
-    <Page Include="Project\StartLauncheWDr.xaml">
+    <Page Include="Machine\ImportExportMachiningWindowWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Machine\ImportExportToolWD.xaml">
+      <SubType>Designer</SubType>
+    </Page>
+    <Page Include="Machine\WaterJetPageUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\StartLauncheWD.xaml">
+    </Page>
+    <Page Include="Project\CicloStartWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
@@ -1021,6 +1061,183 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\SlabId.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Nuovo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Carica.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva-con-nome.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\CSV.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Vein-match.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DatiMacchina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DB-lavorazioni.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DB-utensili.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Macchina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Movimento-manuale.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-singolo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-multiplo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Taglio-griglia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Spianatura.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Copia-dima.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Sezione-cornice.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Foro-singolo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P1_P2.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Esegui.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Simula.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Test-lama.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\File-CSV.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-allunga-o-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\ON_OFF-singolo-taglio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-ON.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-OFF.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-centro-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-centro-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Modifica-inizio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Modifica-fine.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inverti.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Pausa-ON_OFF.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-tutti-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inizio-tutti-centro.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-tutti-centro.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Fine-tutti-fuori.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-allunga.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Tutti-accorcia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parcheggia-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Inserisci-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Elimina-pezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Seleziona-tutto.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Deseleziona-tutto.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Arco.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Linea.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Rimuovi-segmento.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Chiudi.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Salva-taglio.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Take-point.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Specchia.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Rimuovi_elimina.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\XYJog.png" />
+    <Resource Include="Resources\NewIcons\ZBJog.png" />
+    <Resource Include="Resources\NewIcons\ZCJog.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Lucidatura.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P1.png" />
+    <Resource Include="Resources\NewIcons\Acquisisci-P2.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Acquisisci-P.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -77,7 +77,7 @@
     <BitmapImage x:Key="ZoomOutImg" UriSource="Resources/NewIcons/Zoom-.png"></BitmapImage>
     <BitmapImage x:Key="ZoomWinImg" UriSource="Resources/NewIcons/ZoomWIn.png"></BitmapImage>
     <BitmapImage x:Key="LogoOmagImg" UriSource="Resources/NewIcons/logo-OmCut.png"></BitmapImage>
-    
+  
     <!--Nuove icone da sistemare-->
     <BitmapImage x:Key="AvantiVeloceImg" UriSource="Resources/NewIcons/AvantiVeloce.png"></BitmapImage>
     <BitmapImage x:Key="IndietroVeloceImg" UriSource="Resources/NewIcons/IndietroVeloce.png"></BitmapImage>
@@ -88,6 +88,81 @@
     <BitmapImage x:Key="StopImg" UriSource="Resources/NewIcons/Stop.png"></BitmapImage>
     <BitmapImage x:Key="VacuumImg" UriSource="Resources/NewIcons/Vacuum.png"></BitmapImage>
 
+    <!--General-->
+    <BitmapImage x:Key="EseguiImg" UriSource="Resources/NewIcons/Esegui.png"></BitmapImage>
+    <BitmapImage x:Key="SimulaImg" UriSource="Resources/NewIcons/Simula.png"></BitmapImage>
+    
+    <!--ProjectManager-->
+    <BitmapImage x:Key="NuovoImg" UriSource="Resources/NewIcons/Nuovo.png"></BitmapImage>
+    <BitmapImage x:Key="CaricaImg" UriSource="Resources/NewIcons/Carica.png"></BitmapImage>
+    <BitmapImage x:Key="SalvaImg" UriSource="Resources/NewIcons/Salva.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-con-nomeImg" UriSource="Resources/NewIcons/Salva-con-nome.png"></BitmapImage>
+    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/File-CSV.png"></BitmapImage>
+    <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
+    <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
+    <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    
+    <!--Machine-->
+    <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
+    <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
+    <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
+    <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
+    <BitmapImage x:Key="LucidaturaImg" UriSource="Resources/NewIcons/Lucidatura.png"></BitmapImage>
+    
+    
+    <!--Direct cuts-->
+    <BitmapImage x:Key="Taglio-grigliaImg" UriSource="Resources/NewIcons/Taglio-griglia.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-multiploImg" UriSource="Resources/NewIcons/Taglio-multiplo.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-singoloImg" UriSource="Resources/NewIcons/Taglio-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="Foro-singoloImg" UriSource="Resources/NewIcons/Foro-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="SpianaturaImg" UriSource="Resources/NewIcons/Spianatura.png"></BitmapImage>
+    <BitmapImage x:Key="Movimento-manualeImg" UriSource="Resources/NewIcons/Movimento-manuale.png"></BitmapImage>
+    <BitmapImage x:Key="Copia-dimaImg" UriSource="Resources/NewIcons/Copia-dima.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1_P2Img" UriSource="Resources/NewIcons/Acquisisci-P1_P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1Img" UriSource="Resources/NewIcons/Acquisisci-P1.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P2Img" UriSource="Resources/NewIcons/Acquisisci-P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-PImg" UriSource="Resources/NewIcons/Acquisisci-P.png"></BitmapImage>
+    <BitmapImage x:Key="ArcoImg" UriSource="Resources/NewIcons/Arco.png"></BitmapImage>
+    <BitmapImage x:Key="LineaImg" UriSource="Resources/NewIcons/Linea.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi-segmentoImg" UriSource="Resources/NewIcons/Rimuovi-segmento.png"></BitmapImage>
+    <BitmapImage x:Key="ChiudiImg" UriSource="Resources/NewIcons/Chiudi.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-taglioImg" UriSource="Resources/NewIcons/Salva-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Take-pointImg" UriSource="Resources/NewIcons/Take-point.png"></BitmapImage>
+
+    <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+
+
+    <!--Frame-->
+    <BitmapImage x:Key="Sezione-corniceImg" UriSource="Resources/NewIcons/Sezione-cornice.png"></BitmapImage>
+    <BitmapImage x:Key="SpecchiaImg" UriSource="Resources/NewIcons/Specchia.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi_eliminaImg" UriSource="Resources/NewIcons/Rimuovi_elimina.png"></BitmapImage>
+
+    <!--Machinig-->
+    <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Centro-FuoriImg" UriSource="Resources/NewIcons/Fine-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-InizioImg" UriSource="Resources/NewIcons/Modifica-inizio.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-FineImg" UriSource="Resources/NewIcons/Modifica-fine.png"></BitmapImage>
+    <BitmapImage x:Key="InvertiImg" UriSource="Resources/NewIcons/Inverti.png"></BitmapImage>
+    <BitmapImage x:Key="Pausa-ON_OFFImg" UriSource="Resources/NewIcons/Pausa-ON_OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-fuoriImg" UriSource="Resources/NewIcons/Inizio-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-centroImg" UriSource="Resources/NewIcons/Inizio-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-fuoriImg" UriSource="Resources/NewIcons/Fine-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-centroImg" UriSource="Resources/NewIcons/Fine-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
+
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Roboto</FontFamily>
 
     <SolidColorBrush x:Key="OmagCut_TreeViewBackGroundColor" Color="#636974" />
@@ -128,12 +203,19 @@
     </Style>
 
     <Style x:Key="OmagCut_Border" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
-        <!--<Setter Property="Background" Value="#636974"/>
-        <Setter Property="BorderBrush" Value="#636974"/>-->
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
         <Setter Property="Background" Value="#3C3F48"/>
         <Setter Property="BorderBrush" Value="#3C3F48"/>
     </Style>
 
+    <Style x:Key="OmagCut_MachiningBorder" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
+        <Setter Property="Background" Value="{StaticResource OmagCut_Blue}"/>
+        <Setter Property="BorderBrush" Value="#3C3F48"/>
+    </Style>
+
     <Style x:Key="OmagCut_EmptyBorder" TargetType="{x:Type Border}">
         <Setter Property="BorderThickness" Value="{StaticResource BorderThickness}"/>
         <Setter Property="CornerRadius" Value="{DynamicResource EmptyBorder_CornerRadius}"/>
@@ -250,15 +332,40 @@
         <Setter Property="Foreground" Value="White"/>
     </Style>
 
+    <Style x:Key="OmagCut_WjDbRightGrayGradientYellowTextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button_Wrap}">
+        <Setter Property="Background" Value="#1C1D22"/>
+        <Setter Property="BorderBrush" Value="#1C1D22"/>
+        <Setter Property="Foreground" Value="White"/>
+        <Setter Property="FontSize" Value="15"/>
+    </Style>
+
     <Style x:Key="OmagCut_YellowIconToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource  OmagCut_ToggleButton}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#636974"/>
         <Setter Property="BorderBrush" Value="#636974"/>
         <Setter Property="FontSize" Value="{StaticResource FontSize_UpperCaseCharacter}"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type ToggleButton}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
         <Style.Triggers>
             <Trigger Property="IsChecked" Value="True">
                 <Setter Property="ToggleButton.Background" Value="#145993" />
             </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_Blue}"/>
+            </Trigger>
         </Style.Triggers>
+        
     </Style>
 
     <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
@@ -438,10 +545,30 @@
     </Style>
 
     <Style x:Key="OmagCut_YellowIconButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#1C1D22"/>
         <Setter Property="BorderBrush" Value="#1C1D22"/>
         <!--<Setter Property="BorderBrush" Value="{StaticResource OmagCut_Yellow}"/>-->
-        <Setter Property="Foreground" Value="White"/>
+        <Setter Property="Foreground" Value="LightGray"/>
+
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_DarkGray}"/>
+            </Trigger>
+        </Style.Triggers>
     </Style>
 
     <Style x:Key="OmagCut_RightGrayYellowTextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource  OmagCut_ToggleButton_Wrap}">
@@ -459,10 +586,29 @@
     </Style>
 
     <Style x:Key="OmagCut_GradientBlueIconButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+        <Setter Property="OverridesDefaultStyle" Value="True" />
         <Setter Property="Background" Value="#2D3036"/>
         <Setter Property="BorderBrush" Value="#2D3036"/>
-        <!--<Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>-->
+        <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>
         <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter x:Name="MyContentPresenter" 
+                                          Content="{TemplateBinding Content}"
+                                          HorizontalAlignment="Center" 
+                                          VerticalAlignment="Center" />
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Button.Background" Value="{StaticResource OmagCut_LightGray}" />
+                <Setter Property="Button.Foreground" Value="{StaticResource OmagCut_Blue}"/>
+            </Trigger>
+        </Style.Triggers>
     </Style>
 
     <Style x:Key="OmagCut_CenteredLowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">

OmagCUTDictionary.xaml

@@ -155,6 +155,83 @@
     <BitmapImage x:Key="StopImg" UriSource="Resources/Stop.png"></BitmapImage>
     <BitmapImage x:Key="VacuumImg" UriSource="Resources/Vacuum.png"></BitmapImage>
 
+    <!--sono le stesse immagini usate per l'interfaccia Dark-->
+    <!--General-->
+    <BitmapImage x:Key="EseguiImg" UriSource="Resources/NewIcons/Esegui.png"></BitmapImage>
+    <BitmapImage x:Key="SimulaImg" UriSource="Resources/NewIcons/Simula.png"></BitmapImage>
+
+    <!--ProjectManager-->
+    <BitmapImage x:Key="NuovoImg" UriSource="Resources/NewIcons/Nuovo.png"></BitmapImage>
+    <BitmapImage x:Key="CaricaImg" UriSource="Resources/NewIcons/Carica.png"></BitmapImage>
+    <BitmapImage x:Key="SalvaImg" UriSource="Resources/NewIcons/Salva.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-con-nomeImg" UriSource="Resources/NewIcons/Salva-con-nome.png"></BitmapImage>
+    <BitmapImage x:Key="CSVImg" UriSource="Resources/NewIcons/File-CSV.png"></BitmapImage>
+    <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
+    <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
+    <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+
+    <!--Machine-->
+    <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
+    <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
+    <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
+    <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
+    <BitmapImage x:Key="LucidaturaImg" UriSource="Resources/NewIcons/Lucidatura.png"></BitmapImage>
+
+
+    <!--Direct cuts-->
+    <BitmapImage x:Key="Taglio-grigliaImg" UriSource="Resources/NewIcons/Taglio-griglia.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-multiploImg" UriSource="Resources/NewIcons/Taglio-multiplo.png"></BitmapImage>
+    <BitmapImage x:Key="Taglio-singoloImg" UriSource="Resources/NewIcons/Taglio-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="Foro-singoloImg" UriSource="Resources/NewIcons/Foro-singolo.png"></BitmapImage>
+    <BitmapImage x:Key="SpianaturaImg" UriSource="Resources/NewIcons/Spianatura.png"></BitmapImage>
+    <BitmapImage x:Key="Movimento-manualeImg" UriSource="Resources/NewIcons/Movimento-manuale.png"></BitmapImage>
+    <BitmapImage x:Key="Copia-dimaImg" UriSource="Resources/NewIcons/Copia-dima.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1_P2Img" UriSource="Resources/NewIcons/Acquisisci-P1_P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P1Img" UriSource="Resources/NewIcons/Acquisisci-P1.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-P2Img" UriSource="Resources/NewIcons/Acquisisci-P2.png"></BitmapImage>
+    <BitmapImage x:Key="Acquisisci-PImg" UriSource="Resources/NewIcons/Acquisisci-P.png"></BitmapImage>
+    <BitmapImage x:Key="ArcoImg" UriSource="Resources/NewIcons/Arco.png"></BitmapImage>
+    <BitmapImage x:Key="LineaImg" UriSource="Resources/NewIcons/Linea.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi-segmentoImg" UriSource="Resources/NewIcons/Rimuovi-segmento.png"></BitmapImage>
+    <BitmapImage x:Key="ChiudiImg" UriSource="Resources/NewIcons/Chiudi.png"></BitmapImage>
+    <BitmapImage x:Key="Salva-taglioImg" UriSource="Resources/NewIcons/Salva-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Take-pointImg" UriSource="Resources/NewIcons/Take-point.png"></BitmapImage>
+
+    <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
+    <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+
+
+    <!--Frame-->
+    <BitmapImage x:Key="Sezione-corniceImg" UriSource="Resources/NewIcons/Sezione-cornice.png"></BitmapImage>
+    <BitmapImage x:Key="SpecchiaImg" UriSource="Resources/NewIcons/Specchia.png"></BitmapImage>
+    <BitmapImage x:Key="Rimuovi_eliminaImg" UriSource="Resources/NewIcons/Rimuovi_elimina.png"></BitmapImage>
+
+    <!--Machinig-->
+    <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-Centro-FuoriImg" UriSource="Resources/NewIcons/Fine-centro-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-InizioImg" UriSource="Resources/NewIcons/Modifica-inizio.png"></BitmapImage>
+    <BitmapImage x:Key="Modifica-FineImg" UriSource="Resources/NewIcons/Modifica-fine.png"></BitmapImage>
+    <BitmapImage x:Key="InvertiImg" UriSource="Resources/NewIcons/Inverti.png"></BitmapImage>
+    <BitmapImage x:Key="Pausa-ON_OFFImg" UriSource="Resources/NewIcons/Pausa-ON_OFF.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-fuoriImg" UriSource="Resources/NewIcons/Inizio-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Inizio-tutti-centroImg" UriSource="Resources/NewIcons/Inizio-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-fuoriImg" UriSource="Resources/NewIcons/Fine-tutti-fuori.png"></BitmapImage>
+    <BitmapImage x:Key="Fine-tutti-centroImg" UriSource="Resources/NewIcons/Fine-tutti-centro.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
+    <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
+
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
 
     <SolidColorBrush x:Key="OmagCut_TreeViewBackGroundColor" Color="#FFFFFFFF" />
@@ -173,7 +250,14 @@
       <Setter Property="Margin" Value="1" />
    </Style>
 
-   <!--Border-->
+    <Style x:Key="OmagCut_MachiningBorder" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
+        <!--<Setter Property="Background" Value="#636974"   #3C3F48/>
+        <Setter Property="BorderBrush" Value="#636974"      #3C3F48/>-->
+        <Setter Property="Background" Value="{StaticResource OmagCut_Yellow}"/>
+        <Setter Property="BorderBrush" Value="#3C3F48"/>
+    </Style>
+
+    <!--Border-->
    <Style x:Key="OmagCut_Border" TargetType="{x:Type Border}" BasedOn="{StaticResource OmagCut_EmptyBorder}">
       <Setter Property="Background" Value="{StaticResource OmagCut_LightGray}"/>
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Blue}"/>
@@ -386,6 +470,13 @@
       </Style.Triggers>
    </Style>
 
+    <Style x:Key="OmagCut_WjDbRightGrayGradientYellowTextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button_Wrap}">
+        <Setter Property="Background" Value="{StaticResource OmagCut_RightGradientGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Yellow}"/>
+        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+        <Setter Property="FontSize" Value="15"/>
+    </Style>
+
    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--CheckBox-->
@@ -921,7 +1012,16 @@
       <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" />
    </DataTemplate>
 
-   <!--DataTemplate testo ed immagine-->
+   <DataTemplate x:Key="FileNameLsBxItem">
+       <DockPanel>
+           <TextBlock Text="{Binding GraphicName}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" 
+                      DockPanel.Dock="Left" Width="130"/>
+           <TextBlock Text="{Binding sDate}" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+                      DockPanel.Dock="Right" />
+       </DockPanel>
+   </DataTemplate>
+
+    <!--DataTemplate testo ed immagine-->
    <DataTemplate x:Key="DataTemplateItem">
       <Grid >
          <Grid.ColumnDefinitions>
@@ -1105,7 +1205,21 @@
       <Setter Property="KeyboardDimension" Value="300"/>
    </Style>
 
-   <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">
+    <Style x:Key="OmagCut_CalculatorParamWjTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
+        <Setter Property="Width" Value="80"/>
+        <Setter Property="Keyboard" Value="Calculator"/>
+        <Setter Property="KeyboardDimension" Value="300"/>
+        <Setter Property="IsHitTestVisible" Value="False" />
+        <Style.Triggers>
+            <DataTrigger Binding="{Binding IsSelected, RelativeSource={RelativeSource FindAncestor, 
+                                                                                      AncestorType={x:Type ListBoxItem}, AncestorLevel=1}}"
+                         Value="True">
+                <Setter Property="IsHitTestVisible" Value="True" />
+            </DataTrigger>
+        </Style.Triggers>
+    </Style>
+
+    <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">
       <Setter Property="Margin" Value="{DynamicResource MachToolLeftTextBoxNoBorder_Margin}"/>
    </Style>
 
@@ -1139,6 +1253,7 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
+        <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />

OmagCUTDictionary.xaml.vb

@@ -50,6 +50,7 @@ Namespace TreeViewItem
       Private m_sPictureString As String
       Private m_nTType As Integer
       Private m_Items As ObservableCollection(Of CustomItem)
+      Friend m_IsValidTool As Boolean
 
       Public ReadOnly Property PictureString As String
          Get
@@ -86,12 +87,13 @@ Namespace TreeViewItem
       'Private m_sTitle As String
       Private m_nType As Integer
 
+      'Private m_sName As String
       'Public Property Name As String
       '   Get
-      '      Return m_sTitle
+      '      Return m_sName
       '   End Get
       '   Set(value As String)
-      '      m_sTitle = value
+      '      m_sName = value
       '   End Set
       'End Property
 
@@ -101,11 +103,31 @@ Namespace TreeViewItem
          End Get
       End Property
 
+      Friend m_IsValidTool As Boolean = True
+
+      Public Property IsValidTool As Boolean
+         Get
+            Return m_IsValidTool
+         End Get
+         Set(value As Boolean)
+            If value <> m_IsValidTool Then
+               m_IsValidTool = value
+               NotifyPropertyChanged("ToolColor")
+            End If
+         End Set
+      End Property
+
       Sub New(Title As String, nType As Integer)
          Me.Name = Title
          m_nType = nType
       End Sub
 
+      Sub New(sName As String, nType As Integer, bIsValidTool As Boolean)
+         MyBase.Name = sName
+         m_nType = nType
+         m_IsValidTool = bIsValidTool
+      End Sub
+
    End Class
 
    Public Class PartCathegoryItem

Options/OptionsPageUC.xaml

@@ -537,28 +537,54 @@
 
         </GroupBox>
 
+        <!--Selezione il tipo di avvio del programma-->
+        <GroupBox Name="StartLauncherGpBx"
+                Grid.Column="3" Grid.RowSpan="3" Grid.ColumnSpan="1"
+                Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="4*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.25*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.25*"/>
+                </Grid.RowDefinitions>
 
+                <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+            </Grid>
+        </GroupBox>
+       
         <GroupBox Name="FeedbackGpBx"
                 Grid.Column="4" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-         <Grid>
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.25*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.25*"/>
-            </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="0.5*"/>
-                    </Grid.RowDefinitions>
-
-                    <Button Name="FeedbackBtn"
-                          Grid.Row="1" Grid.Column="1"
-                          Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-         </Grid>
+            <Grid>
+                <Grid.ColumnDefinitions>
+                   <ColumnDefinition Width="0.25*"/>
+                   <ColumnDefinition Width="1*"/>
+                   <ColumnDefinition Width="0.25*"/>
+                </Grid.ColumnDefinitions>
+                        <Grid.RowDefinitions>
+                            <RowDefinition Height="0.5*"/>
+                            <RowDefinition Height="1*"/>
+                            <RowDefinition Height="0.5*"/>
+                        </Grid.RowDefinitions>
+                
+                        <Button Name="FeedbackBtn"
+                              Grid.Row="1" Grid.Column="1"
+                              Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </GroupBox>
 

Options/OptionsPageUC.xaml.vb

@@ -9,6 +9,9 @@ Public Class OptionsPageUC
    Private UnitsList() As String = {"inch", "mm"}
    Private ThemesList() As String = {"Classic", "Dark"}
 
+   ' "Last Project", "New Project", "Open Folder", "Show Window"
+   Private StartLauncherList() As String = {EgtMsg(91013), EgtMsg(91014), EgtMsg(91015), EgtMsg(91016)}
+
    Private Sub OptionsPageUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
       ' Associazione della lista linguaggi alla combobox
@@ -28,6 +31,11 @@ Public Class OptionsPageUC
       ThemesCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_THEME, 0, m_MainWindow.GetIniFile())
       Themes_StartUp()
 
+      ' Carico la lista con il tipo di avvio
+      StartLauncherCmBx.ItemsSource = StartLauncherList
+      ' 0-New, 1-Last, 2-Open, 3-Window
+      StartLauncherCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile())
+
       ' Rendo invisibile il GroupBox dei Temi la versione corrente
       ' ThemesGpBx.Visibility = Windows.Visibility.Collapsed
 
@@ -102,7 +110,7 @@ Public Class OptionsPageUC
       ToleranceEMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 21)
       AffondamentoMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 27)
       LarghezzaMsgTxBl.Text = EgtMsg(MSG_OPTIONSPAGEUC + 28)
-
+      StartLauncherGpBx.Header = EgtMsg(91009)
    End Sub
 
    Private Sub UpdateSlabDxf()
@@ -304,6 +312,11 @@ Public Class OptionsPageUC
       WritePrivateProfileString(S_GENERAL, K_MESSAGES, m_MainWindow.m_CurrLanguage.LanguageName, m_MainWindow.GetIniFile())
    End Sub
 
+   Private Sub StartLauncherCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles StartLauncherCmBx.SelectionChanged
+      Dim nIndex As Integer = StartLauncherCmBx.SelectedIndex
+      WritePrivateProfileString(S_GENERAL, K_AUTOLOADLASTPROJ, StartLauncherCmBx.SelectedIndex, m_MainWindow.GetIniFile())
+   End Sub
+
    Private Sub UnitsOfMeasureCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles UnitsOfMeasureCmBx.SelectionChanged
       Dim bMM As Boolean = (UnitsOfMeasureCmBx.SelectedIndex <> 0)
       EgtSetUiUnits(bMM)
@@ -1209,7 +1222,7 @@ Public Class OptionsPageUC
          Dim sCurrProjectDir As String = Path.GetDirectoryName(sCurrProject)
          If Not String.IsNullOrWhiteSpace(sCurrProjectDir) Then
             Dim TempFiles() As String = Directory.GetFiles(sCurrProjectDir)
-            For FileIndex = 0 To TempFiles.Count - 1
+            For FileIndex As Integer = 0 To TempFiles.Count - 1
                If Path.GetFileNameWithoutExtension(TempFiles(FileIndex)).Contains(Path.GetFileNameWithoutExtension(sCurrProject)) AndAlso TempFiles(FileIndex) <> sCurrProject Then
                   OtherFiles.Add(TempFiles(FileIndex))
                End If

Project/CicloStartWD.xaml

@@ -0,0 +1,50 @@
+<Window x:Class="CicloStartWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="200" Width="426.5" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="CicloStartTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+ 
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

Project/CicloStartWD.xaml.vb

@@ -0,0 +1,38 @@
+Imports EgtUILib
+Imports EgtWPFLib
+Imports System.IO
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+Class CicloStartWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Public Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub StartLauncherWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' imopposto il messaggio di avvio
+      CicloStartTxbl.Text = "Avvio Ciclo-Start"
+   End Sub
+
+   ' creo un progetto nuovo
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      Me.Close()
+   End Sub
+
+   ' Ultimo progetto
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      ' Aspetto e lo avvio
+      System.Threading.Thread.Sleep(300)
+      ' avvio il ciclo start della macchina
+      m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
+      Me.Close()
+   End Sub
+
+End Class

Project/CurrentProjectPageUC.xaml

@@ -30,7 +30,7 @@
       </Grid>
 
       <!-- Definizione della Grid laterale -->
-      <Grid Grid.RowSpan="3">
+        <Grid Grid.RowSpan="3">
          <Grid.RowDefinitions>
             <RowDefinition Height="2*"/>
             <RowDefinition Height="7*"/>
@@ -38,8 +38,8 @@
          </Grid.RowDefinitions>
 
          <!-- Definizione della Grid con le caratteristiche del progetto -->
-         <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_Border}" Grid.Row="0" >
-            <Grid >
+            <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_MachiningBorder}" Grid.Row="0" >
+                <Grid >
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="1*"/>
                   <ColumnDefinition Width="1*"/>

Project/CurrentProjectPageUC.xaml.vb

@@ -93,6 +93,14 @@ Public Class CurrentProjectPageUC
          Dim DstLnColor As New Color3d(255, 0, 0)
          GetPrivateProfileColor(S_SCENE, K_DISTLINE, DstLnColor, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetDistLineMaterial(DstLnColor)
+
+         ''imposto il colore di sfondo del progetto
+         'Dim BAckTopColor As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackTop", BAckTopColor, m_MainWindow.GetIniFile())
+         'Dim BackBottom As New Color3d(192, 192, 192)
+         'GetPrivateProfileColor(S_SCENE, "BackBottom", BackBottom, m_MainWindow.GetIniFile())
+         'CurrentProjectScene.SetViewBackground(BAckTopColor, BackBottom)
+
          ' imposto parametri OpenGL
          Dim nDriver As Integer = GetPrivateProfileInt(S_OPENGL, K_DRIVER, 3, m_MainWindow.GetIniFile())
          Dim b2Buff As Boolean = (GetPrivateProfileInt(S_OPENGL, K_DOUBLEBUFFER, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -174,26 +182,27 @@ Public Class CurrentProjectPageUC
          m_bFirst = False
 
          ' ------------------ SELEZIONE AVVIO -----------------------------
-         '' apro la finstra di selezione di avvio del programma
+         ' apro la finstra di selezione di avvio del programma
          'StartProgram()
          ' ------------------ SELEZIONE AVVIO -----------------------------
 
-         ' Se richiesto, carico ultimo progetto
-         Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         If bAutoLoadLast Then
-            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-            Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-            If Not LoadProject(sPath, False) Then
-               NewProject()
-            End If
-            EgtResetModified()
-            'Altrimenti ne imposto uno nuovo
-         Else
-            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-            NewProject()
-         End If
+         '' Se richiesto, carico ultimo progetto
+         'Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
+         'If bAutoLoadLast Then
+         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
+         '   Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
+         '   If Not LoadProject(sPath, False) Then
+         '      NewProject()
+         '   End If
+         '   EgtResetModified()
+         '   'Altrimenti ne imposto uno nuovo
+         'Else
+         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
+         '   NewProject()
+         'End If
 
-         '' creo nuovo progetto
+         ' creo nuovo progetto
+         m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
 
          ' Nascondo progress per fotografia
@@ -227,16 +236,18 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Public Sub StartProgram()
+      ' leggo il tipo di avvio del programma: 0-New, 1-Last, 2-Open, 3-Window
+      Dim nStart As Integer = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile())
+
       Dim MyStartLancherWD As New StartLauncherWD(m_MainWindow)
-      MyStartLancherWD.ShowDialog()
-
-      ' Se richiesto, carico ultimo progetto
-      Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-      m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-      ' se ultimo progetto
-      If MyStartLancherWD.CurrSelection = 2 Then
-         bAutoLoadLast = True
+      ' mostro la finestra di avvio solo se configirato (= 3)
+      If nStart = MODE_LAUNCHER.ShowWindow Then
+         MyStartLancherWD.ShowDialog()
+      Else
+         MyStartLancherWD.CurrSelection = nStart
+      End If
 
+      If MyStartLancherWD.CurrSelection = MODE_LAUNCHER.LastProject Then
          ' Stampo il numero di progetto con 4 decimali: 12 -> "0012"
          Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
          ' provo ad aprire l'ultimo progetto modificato
@@ -249,35 +260,71 @@ Public Class CurrentProjectPageUC
          End If
          EgtResetModified()
 
-         ' apro il file selezionato all'avvio
-      ElseIf MyStartLancherWD.CurrSelection = 3 Then
-         If Not LoadProject(MyStartLancherWD.SelPath, False) Then
-            ' altrimenti apro un nuovo progetto
-            NewProject()
-         Else
-            ' salvo il nome del file caricato
-            m_MruFiles.Add(MyStartLancherWD.SelPath)
-         End If
-         EgtResetModified()
-
-         ' se nuovo progetto o naviga direttorio
-      ElseIf MyStartLancherWD.CurrSelection = 1 Or MyStartLancherWD.CurrSelection = 0 Then
-         bAutoLoadLast = False
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.NewProject Then
          NewProject()
+
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.OpenFolder Then
+         NewProject()
+         EgtSetCurrentContext(CurrentProjectScene.GetCtx())
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         ' Cancello eventuali messaggi
+         ClearMessage()
+         ' Imposto la pagina attualmente attiva come Previous
+         m_MainWindow.m_PrevActivePage = m_MainWindow.m_ActivePage
+         ' Passo alla pagina di apertura con preview
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
+         m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+
+      ' seleziono il file dalla lista della finestra (= 4) 
+      ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.SelectedProject Then
+         NewProject()
+         Dim sCurrDir As String = Path.GetDirectoryName(MyStartLancherWD.SelPath)
+         Dim sCurrFile As String = Path.GetFileName(MyStartLancherWD.SelPath)
+
+         If Not LoadProject(sCurrDir & "\" & sCurrFile) Then
+            NewProject()
+            m_MruFiles.Remove(sCurrDir & "\" & sCurrFile)
+         Else
+            ' Verifico se file salvato con nome guardando il nome della cartella in cui si trova
+            Dim sSaveNameDir As String = String.Empty
+            GetPrivateProfileString(S_GENERAL, K_SAVENAMEDIR, "", sSaveNameDir, m_MainWindow.GetIniFile())
+            If sCurrDir = sSaveNameDir Then
+               WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, sCurrFile.Substring(0, sCurrFile.Length - 4), m_MainWindow.GetIniFile())
+               ' Salvo equivalente con indice
+               SetNextProjectIndex()
+               SaveProject()
+            Else
+               WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, String.Empty, m_MainWindow.GetIniFile())
+            End If
+            ' Salvo path di carico del progetto
+            If sCurrDir <> m_MainWindow.GetSaveDir() And sCurrDir <> sSaveNameDir Then
+               SetLoadPath(sCurrDir & "\" & sCurrFile)
+            End If
+            m_MruFiles.Add(sCurrDir & "\" & sCurrFile)
+         End If
       End If
 
-      '' Nascondo progress per fotografia
-      'PhotoProgress.Visibility = Windows.Visibility.Hidden
-      '' Carico sottopagina opportuna
-      'If GetProjectType() <> PRJ_TYPE.FRAMES Then
-      '   CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-      '   m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-      '   m_MainWindow.CadCutBtn.IsChecked = True
-      'Else
-      '   CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-      '   m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-      '   m_MainWindow.FrameCutBtn.IsChecked = True
-      'End If
+   End Sub
+
+   ' questo metodo è direttamente richiamato in caso di selezione della regione sinistra della pagina
+   Private Sub ChooseMachining() Handles CurrProjGrid.MouseDown
+      ' Apro pagina di selezione della lavorazione prima di chiudere il grezzo
+      Dim m_ChooseMachiningPage = New ChooseMachining(m_MainWindow)
+      ' apro la finestra per la selezione delle lavorazioni
+      m_ChooseMachiningPage.ShowDialog()
+      ' se seleziono "Ok" allora resetto tutte le lavorazioni del progetto
+      If m_ChooseMachiningPage.DialogResult Then
+         EgtSetCurrentContext(CurrentProjectScene.GetCtx())
+         ' Cancello eventuali messaggi
+         ClearMessage()
+         ' Ricalcolo tutte le lavorazioni
+         Dim nWarn As Integer = 0
+         ResetAllMachinings(nWarn)
+         If nWarn = 1 Then SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+         ' Aggiorno visualizzazione
+         EgtDraw()
+      End If
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseDownScene
@@ -390,7 +437,7 @@ Public Class CurrentProjectPageUC
       Return True
    End Function
 
-   Friend Function AdjustAdditionalTable() As Boolean
+   Friend Function AdjustAdditionalTable( Optional bForced As Boolean = False) As Boolean
       ' Recupero altezza sottotavola corrente
       Dim nFixtId As Integer = EgtGetFirstNameInGroup(EgtGetFirstMachGroup(), MACH_FIXT_GROUP)
       Dim nAddTabId As Integer = EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE)
@@ -402,7 +449,7 @@ Public Class CurrentProjectPageUC
       End If
       ' Se valore cambiato, aggiorno...
       Dim dDeltaZ As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable - dCurrAddTab
-      If Math.Abs(dDeltaZ) > EPS_SMALL Then
+      If Math.Abs(dDeltaZ) > EPS_SMALL Or bForced Then
          AddAdditionalTable()
          UpdateAllRawsZ(dDeltaZ)
          If GetPhoto() <> GDB_ID.NULL Then
@@ -410,6 +457,12 @@ Public Class CurrentProjectPageUC
             UpdateContour()
             If EgtGetRawPartCount() > 0 Then
                ShowPhoto(False)
+               Dim nRawGrpId As Integer = EgtGetFirstRawPart()
+               While nRawGrpId <> GDB_ID.NULL
+                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup( nRawGrpId, NAME_RAW_SOLID)
+                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName( nRawSolidId, PHOTO_NAME)
+                  nRawGrpId = EgtGetNextRawPart( nRawGrpId)
+               End While
             End If
          End If
       End If
@@ -423,16 +476,28 @@ Public Class CurrentProjectPageUC
       EgtErase(EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE))
       ' Altezza eventuale tavola aggiuntiva
       Dim dAddTable As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
-      ' Se non esiste sovratavola, esco subito
+      ' Se non richiesta sovratavola, non c'è altro da fare ed esco
       If dAddTable < 10 * EPS_SMALL Then Return True
       ' Recupero box tavola
       Dim ptMin, ptMax As Point3d
       EgtGetTableArea(1, ptMin, ptMax)
-      ' Aggiungo sovratavola nel gruppo dei bloccaggi
-      ptMax.z -= DELTAZ_ADDTAB
-      ptMin.z = ptMax.z
-      ptMax.z += dAddTable
-      Dim nAddTabId As Integer = EgtCreateSurfTmBBox(nFixtId, ptMin, ptMax, GDB_RT.GLOB)
+      ' Nuova geometria
+      Dim nAddTabId As Integer = GDB_ID.NULL
+      ' Se esiste geometria di riferimento
+      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      If nRefAddTabId <> GDB_ID.NULL Then
+         nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
+         EgtSetStatus( nAddTabId, GDB_ST.ON_)
+         EgtScale( nAddTabId, new Frame3d( ptMin), 1, 1, dAddTable / 10)
+      ' altrimenti la creo
+      Else
+         ' Aggiungo sovratavola nel gruppo dei bloccaggi
+         ptMax.z -= DELTAZ_ADDTAB
+         ptMin.z = ptMax.z
+         ptMax.z += dAddTable
+         nAddTabId = EgtCreateSurfTmBBox(nFixtId, ptMin, ptMax, GDB_RT.GLOB)
+      End If
+      ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
       EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
@@ -488,7 +553,7 @@ Public Class CurrentProjectPageUC
       End If
       ' Se la macchina del file è quella impostata
       If String.Compare(sFileMachine, m_MainWindow.GetCurrMachine(), True) = 0 Then
-         AdjustAdditionalTable()
+         AdjustAdditionalTable( True)
       ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
       Else
          ' Emetto messaggio
@@ -557,13 +622,15 @@ Public Class CurrentProjectPageUC
                File.Copy(sPhoto, sNewPhoto, True)
             Catch ex As FileNotFoundException
                ' non è un problema
+            Catch ex As DirectoryNotFoundException
+               ' non è un problema
             Catch ex As Exception
                Return False
             End Try
          End If
          ' Notifico a foto il cambio di path
          EgtChangePhotoPath(nPhotoId, sNewPhoto)
-      ' Altrimenti cancello eventuali file di foto associabili al progetto
+         ' Altrimenti cancello eventuali file di foto associabili al progetto
       Else
          Dim sPhoto1 As String = Path.ChangeExtension(sPath, "jpg")
          Dim sPhoto2 As String = Path.ChangeExtension(sPath, "png")
@@ -588,6 +655,8 @@ Public Class CurrentProjectPageUC
       SetProjectMaterial()
       ' Eseguo
       If Not SaveFile(sPath) Then Return False
+      ' aggiungo il file all'elenco dei file recenti
+      m_MruFiles.Add(sPath)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       ' Salvo eventuale VeinMatching
@@ -641,6 +710,8 @@ Public Class CurrentProjectPageUC
       If Not SaveFile(sPath) Then
          Return False
       End If
+      ' aggiungo il file all'elenco dei file recenti
+      m_MruFiles.Add(sPath)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True

Project/ProjectMgrUC.xaml

@@ -14,32 +14,50 @@
             <ColumnDefinition Width="1.3*"/>
         </Grid.ColumnDefinitions>
         <UniformGrid Name="LowerButtonGrid" Rows="1" >
-        
-           <Button Name="NewBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="LoadBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="SaveBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-           <Button Name="SaveNameBtn"
-                 Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
-        
-           <Button Name="CSVBtn"
-                 Style="{DynamicResource OmagCut_YellowTextButton}"/> 
-           <ToggleButton Name="VeinMatchingBtn"
-                 Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-           <ToggleButton Name="RegisterBtn"
-                 Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+            <Button Name="NewBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource NuovoImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="LoadBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource CaricaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="SaveBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SalvaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="SaveNameBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource Salva-con-nomeImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="CSVBtn"
+                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource CSVImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            
+            <ToggleButton Name="VeinMatchingBtn"
+                 Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                <Image Source="{DynamicResource Vein-matchImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+            
+            <ToggleButton Name="RegisterBtn"
+                 Style="{DynamicResource OmagCut_YellowToggleButton}"></ToggleButton>
            <Button Name="ResetCutBtn"
-                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                 Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
            <!--Abilito la selezione delle linee da disegno-->
-           <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_BlueToggleButton}"/>
-           
-                
+            <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
         </UniformGrid>
 
-        <Button Name="SimulateBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButtonPrjMgr}"/>
-        <Button Name="WorkBtn" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueTextButtonPrjMgr}"/>
+        <Button Name="SimulateBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+        </Button>
+        <Button Name="WorkBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+        </Button>
 
     </Grid>
 </UserControl>

Project/ProjectMgrUC.xaml.vb

@@ -14,21 +14,22 @@ Public Class ProjectMgrUC
 
    Private Sub ProjectMgrUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Imposto i messaggi letti dal file dei messaggi
-      NewBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 3)
-      LoadBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 4)
-      SaveBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 5)
-      SaveNameBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 6)
-      CSVBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 8)
-      VeinMatchingBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 9)
+      NewBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 3)
+      LoadBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 4)
+      SaveBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 5)
+      SaveNameBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 6)
+      CSVBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 8)
+      VeinMatchingBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 9)
+
       RegisterBtn.Content = "REG"                              'Shape Registration
       ResetCutBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)         'Reset
-      SimulateBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
+      SimulateBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
-         WorkBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
+         WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
       Else
-         WorkBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
+         WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
-      TestBtn.Content = EgtMsg(90255)                          'Test
+      TestBtn.ToolTip = EgtMsg(90255)                          'Test
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -126,6 +127,23 @@ Public Class ProjectMgrUC
       Return nTabInd
    End Function
 
+   Friend Function ChangeTable() As Integer
+      Dim nRes As Integer = 0
+      ' se non abilitato esco dalla pagina
+      If GetPrivateProfileInt(S_TABLE, K_CHANGETABWD, 0, m_MainWindow.GetMachIniFile()) = 0 Then
+         Return nRes
+      End If
+      Select Case GetTableCount()
+         Case 2
+            ' Vuoi cambiare tavola?
+            Dim TableToUse As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90968)), EgtMsgBox.Buttons.OK_CANCEL, EgtMsgBox.Icons.NULL)
+            nRes = TableToUse.m_nPressedBtn
+         Case Else
+            ' negli altri casi (3 tavole o una tavola non fare nulla)
+      End Select
+      Return nRes
+   End Function
+
    Private Sub LoadBtn_Click(sender As Object, e As RoutedEventArgs) Handles LoadBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -153,6 +171,7 @@ Public Class ProjectMgrUC
    End Sub
 
    Friend Sub PostLoad(ByVal sCurrDir As String, sCurrFile As String)
+
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       If Not m_CurrProjPage.LoadProject(sCurrDir & "\" & sCurrFile) Then
          m_CurrProjPage.NewProject()
@@ -297,9 +316,9 @@ Public Class ProjectMgrUC
          ptMid.x = (ptEnd.x + ptStart.x) / 2
          ptMid.y = (ptEnd.y + ptStart.y) / 2
          ptMid.z = (ptEnd.z + ptStart.z) / 2 + dDiam / 2
+         ptMid -= vtDirT * dThick
 
          '--------------------------- Imposto la posizione della macchina ----------------------------
-
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
@@ -310,22 +329,23 @@ Public Class ProjectMgrUC
          Dim nStat As Integer
          Dim dC1, dB1, dC2, dB2 As Double
          EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
-         ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
+         ' calcolo la posizione degli assi lineari X, Y, Z
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
 
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
-            vtDirT.Rotate(Vector3d.Z_AX, 180)
+            vtDirT = - vtDirT
+            ptMid -= vtDirT * dThick
             EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
          End If
 
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
-
-         ExecuteCommandCNC(ptMid, dC1, dB1)
+         Dim ptMachine As Point3d = New Point3d(dX, dY, dZ)
+         ExecuteCommandCNC(ptMachine, dC1, dB1)
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
@@ -437,7 +457,7 @@ Public Class ProjectMgrUC
       ' Costringo ad aggiornare UI
       UpdateUI()
       ' Se macchina normale
-      If Not m_CurrMachine.bProdLine Then
+      If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
             ' copio il progetto corrente come progetto in lavorazione
@@ -446,8 +466,21 @@ Public Class ProjectMgrUC
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
+               ''-------------------Avvio il Ciclo-Start-------------------------
+               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+               'MyCicloStartWD.ShowDialog()
+               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
+
+         '-------------------Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
+
+         '-------------------Avvio il Ciclo-Start-------------------------
+
          ' Altrimenti linea di produzione
       Else
          ' Verifico non sia già stato trasmesso
@@ -490,12 +523,12 @@ Public Class ProjectMgrUC
                                             GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
                   If bSlabId Then
                      Dim sBlock As String = ""
-                     GetPrivateProfileString( S_RAWPART, K_BLOCKNAME, "", sBlock, m_MainWindow.GetIniFile())
-                     Dim nSlabNbr As Integer = GetPrivateProfileInt( S_RAWPART, K_SLABNBR, 0, m_MainWindow.GetIniFile())
+                     GetPrivateProfileString(S_RAWPART, K_BLOCKNAME, "", sBlock, m_MainWindow.GetIniFile())
+                     Dim nSlabNbr As Integer = GetPrivateProfileInt(S_RAWPART, K_SLABNBR, 0, m_MainWindow.GetIniFile())
                      nSlabNbr += 1
                      Dim sSlabNbr As String = nSlabNbr.ToString()
-                     WritePrivateProfileString( S_RAWPART, K_SLABNBR, sSlabNbr, m_MainWindow.GetIniFile())
-                     Utility.SetBlockAndSlabNbr( sBlock, sSlabNbr)
+                     WritePrivateProfileString(S_RAWPART, K_SLABNBR, sSlabNbr, m_MainWindow.GetIniFile())
+                     Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
                   End If
                   ' Salvo il progetto
                   m_CurrProjPage.SaveProject()
@@ -523,8 +556,10 @@ Public Class ProjectMgrUC
                If AskTransm.m_nPressedBtn <> 1 Then Return
             End If
          End If
+
          ' Se non collegato alla macchina
          If Not m_MainWindow.m_bNCLink Then
+            ' salvo il progetto corrente incrementando il valore del progetto
             m_CurrProjPage.SetWarningMessage(EgtMsg(90316))        'Non connesso alla macchina
             ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
@@ -535,13 +570,15 @@ Public Class ProjectMgrUC
             m_CurrProjPage.SaveProject()
             ' lancio eventuale lua post-trasmissione
             m_MainWindow.ExecSentProgScript(False, bAlreadySent)
+            ' se in versione demo (per linea di produzione) salvo il file corrente incrementando la numerazione
             Return
          End If
+
          ' Leggo variabile relativa al programma 1 (standard E80021)
          m_CurrNcComm.m_CN.n_DReadELS_handle = 0
          m_CurrNcComm.m_CN.ReadEls_Add_Parameter(m_CurrMachine.sVarProg1, 1)
          Dim nVarProg1 As Integer = 99
-         For I = 0 To 10
+         For I As Integer = 0 To 10
             System.Threading.Thread.Sleep(50)
             If m_CurrNcComm.m_CN.n_DReadELS_handle = 1 Then
                nVarProg1 = CInt(m_CurrNcComm.m_CN.d_DReadELS_value)
@@ -552,7 +589,7 @@ Public Class ProjectMgrUC
          m_CurrNcComm.m_CN.n_DReadELS_handle = 0
          m_CurrNcComm.m_CN.ReadEls_Add_Parameter(m_CurrMachine.sVarProg2, 1)
          Dim nVarProg2 As Integer = 99
-         For I = 0 To 10
+         For I As Integer = 0 To 10
             System.Threading.Thread.Sleep(50)
             If m_CurrNcComm.m_CN.n_DReadELS_handle = 1 Then
                nVarProg2 = CInt(m_CurrNcComm.m_CN.d_DReadELS_value)
@@ -564,7 +601,7 @@ Public Class ProjectMgrUC
          If Not String.IsNullOrWhiteSpace(m_CurrMachine.sVarProgTwins) Then
             m_CurrNcComm.m_CN.n_DReadELS_handle = 0
             m_CurrNcComm.m_CN.ReadEls_Add_Parameter(m_CurrMachine.sVarProgTwins, 1)
-            For I = 0 To 10
+            For I As Integer = 0 To 10
                System.Threading.Thread.Sleep(50)
                If m_CurrNcComm.m_CN.n_DReadELS_handle = 1 Then
                   nVarProgTwins = CInt(m_CurrNcComm.m_CN.d_DReadELS_value)
@@ -610,6 +647,7 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+
       End If
 #End If
    End Sub
@@ -617,13 +655,6 @@ Public Class ProjectMgrUC
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
-      'If m_CurrNcComm.m_nNCType = 3 AndAlso m_CurrNcComm.m_CN.m_IsSiemensOne Then
-      '   SiemensMoveAxis(ptMid, dAngC, dAngB)
-      '   Return
-      'End If
-
-      Dim nTemp As Integer = 0
-      Dim dTemp As Double = 0
       Dim CmdString As String = String.Empty
       If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          Return
@@ -657,26 +688,8 @@ Public Class ProjectMgrUC
 
       '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
       ' Assegno valore ad ogni asse da muovere (in zero macchina)
-      Dim dAxVal As Double = ptMid.x
-      Dim bThickSaw As Boolean = True
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", dAxVal)
-      dAxVal = ptMid.y
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", dAxVal)
-      dAxVal = ptMid.z
+      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", ptMid.x)
+      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", ptMid.y)
       EgtLuaSetGlobNumVar("CMD.Z_AXISMOVE", ptMid.z)
       ' imposto gli angoli 
       EgtLuaSetGlobNumVar("CMD.C_ANGMOVE", dAngC)
@@ -692,15 +705,6 @@ Public Class ProjectMgrUC
       ' Log del comando
       EgtOutLog("CmdString=" & CmdString)
 
-      '' Eseguo in MDI
-      'm_CurrNcComm.m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI
-      'System.Threading.Thread.Sleep(150)
-      'm_CurrNcComm.m_CN.sz_ManualDataInput = CmdString
-      'm_CurrNcComm.m_CN.MDI_command()
-      'System.Threading.Thread.Sleep(150)
-      'm_CurrNcComm.m_CN.DGeneralFunctions_CycleStart()
-      'm_CurrNcComm.m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
-
       ' Reset lua
       EgtLuaResetGlobVar("CMD")
       ' Modifico stringa per inserire i newline ( in questo caso non c'è bisogno perchè tutto sulla stessa linea)
@@ -728,95 +732,6 @@ Public Class ProjectMgrUC
 
    End Sub
 
-   Private Sub SiemensMoveAxis(ptMid As Point3d, dAngC As Double, dAngB As Double)
-      Dim nTemp As Integer = 0
-      Dim dTemp As Double = 0
-      Dim CmdString As String = String.Empty
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua")
-
-      '----------- DATI MOVIMENTO -----------
-      ' imposto avanzamneto in rapido (non deve essere impostata feed e speed)
-      EgtLuaSetGlobBoolVar("CMD.G0", True)
-      '' fermo la rotazione dell'utensile (per sicure
-      'EgtLuaSetGlobNumVar("CMD.F", 30000)
-      'EgtLuaSetGlobNumVar("CMD.S", 0)
-
-      '----------- POSIZINE MACCHINA -----------
-      ' Leggo gli assi rispetto allo 0 macchina
-      m_CurrNcComm.m_CN.set_OP_OM(0)
-
-      System.Threading.Thread.Sleep(50)
-      Dim dL1o, dL2o, dL3o As Double
-      m_CurrNcComm.GetLinearAxesPositions(dL1o, dL2o, dL3o)
-      Dim dR1, dR2 As Double
-      m_CurrNcComm.GetRotaryAxesPositions(dR1, dR2)
-      EgtLuaSetGlobNumVar("CMD.L1o", dL1o)
-      EgtLuaSetGlobNumVar("CMD.L2o", dL2o)
-      EgtLuaSetGlobNumVar("CMD.L3o", dL3o)
-      EgtLuaSetGlobNumVar("CMD.R1", dR1)
-      EgtLuaSetGlobNumVar("CMD.R2", dR2)
-
-      ' Recupero spessore lama corrente
-      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-      EgtTdbSetCurrTool(sSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-      EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
-
-      '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
-      ' Assegno valore ad ogni asse da muovere (in zero macchina)
-      Dim dAxVal As Double = ptMid.x
-      Dim bThickSaw As Boolean = True
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.X_AXISMOVE", dAxVal)
-      dAxVal = ptMid.y
-      If bThickSaw Then
-         If dAxVal > 0 Then
-            dAxVal += dThick
-         ElseIf dAxVal < 0 Then
-            dAxVal -= dThick
-         End If
-      End If
-      EgtLuaSetGlobNumVar("CMD.Y_AXISMOVE", dAxVal)
-      dAxVal = ptMid.z
-      EgtLuaSetGlobNumVar("CMD.Z_AXISMOVE", ptMid.z)
-
-      EgtLuaSetGlobNumVar("CMD.C_ANGMOVE", dAngC)
-      EgtLuaSetGlobNumVar("CMD.B_ANGMOVE", dAngB)
-
-      ' Calcolo stringa di comando risultante
-      EgtLuaCallFunction("CmdString")
-      EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
-
-      ' Reset lua
-      EgtLuaResetGlobVar("CmdString")
-      EgtLuaResetGlobVar("CMD")
-      ' Log del comando
-      EgtOutLog("CmdString=" & CmdString)
-
-      ' Creo file 
-      Dim sFilePath As String = m_MainWindow.GetCncDir() & "\MANAXMOV.MPF"
-      Try
-         File.WriteAllLines(sFilePath, New List(Of String)({CmdString, "M30"}), Text.Encoding.UTF8)
-      Catch ex As Exception
-         EgtOutLog("Eccezione creazione programma: " & ex.Message)
-      End Try
-      ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_CurrNcComm.m_CN.Download_NC_prog(sFilePath, "MANAXMOV") = 0 Then
-         EgtOutLog("Programma caricato")
-         System.Threading.Thread.Sleep(150)
-         Dim sActivateManAxMov As String = "/plc/OmagCUT_DB.CTRL.Start_Asup"
-         ' Attivo variabile per esecuzione comando manuale
-         m_CurrNcComm.m_CN.DVariables_WriteVariables3(sActivateManAxMov, 1, 1, 0, 0, "")
-      End If
-   End Sub
-
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
 
    Private Sub TestBtn_Click(sender As Object, e As RoutedEventArgs) Handles TestBtn.Click

Project/StartLauncheWD.xaml

@@ -4,7 +4,7 @@
    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
    FontFamily="{DynamicResource OmagCut_Font}"
    ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="SaveNameWD" Height="300" Width="426.5" ShowInTaskbar="False">
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
     <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
     <Border Style="{DynamicResource OmagCut_Border}">
         <Grid x:Name="SaveNameGrid">
@@ -14,19 +14,21 @@
                 <ColumnDefinition Width="0.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="0.1*"/>
                 <RowDefinition Height="0.5*"/>
                 <RowDefinition Height="0.2*"/>
                 <RowDefinition Height="1*"/>
                 <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="0.4*"/>
+                <RowDefinition Height="0.1*"/>
                 <RowDefinition Height="1*"/>
                 <RowDefinition Height="0.2*"/>
                 
             </Grid.RowDefinitions>
 
-            <!--Messaggio di tipo di avvio-->
+            <!--Messaggio: Selezione modalità di avvio-->
             <TextBlock Name="SlectLauncherTxbl" Grid.Column="1" Grid.Row="1"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
             <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
                 <Grid.ColumnDefinitions>
@@ -39,32 +41,33 @@
 
                 </Grid.ColumnDefinitions>
 
-                <!--apri folder progetti-->
-                <Button Name="OpenFolder" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-                        ToolTip="OpenFolder">
-                    <Image Source="{DynamicResource ZoomWinImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <!--ultimo progetto-->
+                <Button Name="LastProject" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="LastProject">
+                    <Image Source="{DynamicResource LastProjImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
                 <!--nuovo progetto-->
-                <Button Name="NewProject" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                <Button Name="NewProject" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
                         ToolTip="New Project">
-                    <Image Source="{DynamicResource CsvNewImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
-                <!--ultimo progetto-->
-                <Button Name="LastProject" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-                        ToolTip="LastProject">
-                    <Image Source="{DynamicResource CsvOpenImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <!--apri folder progetti-->
+                <Button Name="OpenFolder" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="OpenFolder">
+                    <Image Source="{DynamicResource CaricaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>
-                
+
             </Grid>
 
+            <UniformGrid Grid.Column="1" Grid.Row="5">
+                <TextBlock Name="FileName" Grid.Column="1"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <TextBlock Name="DataFile" Grid.Column="1"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            </UniformGrid>
             <!--lista degli ultimi file aperti-->
-            <ListBox Name="FilesLsBx"  Grid.Column="1" Grid.Row="5"
-                    SelectionMode="Extended">
-                <ListBox.ItemContainerStyle>
-                    <Style TargetType="ListBoxItem">
-
-                    </Style>
-                </ListBox.ItemContainerStyle>
+            <ListBox Name="FilesLsBx"  Grid.Column="1" Grid.Row="7" ItemTemplate="{DynamicResource FileNameLsBxItem}"
+                     SelectionMode="Extended">
             </ListBox>
 
 

Project/StartLauncheWD.xaml.vb

@@ -0,0 +1,152 @@
+Imports EgtUILib
+Imports EgtWPFLib
+Imports System.IO
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+
+Public Enum MODE_LAUNCHER
+   LastProject
+   NewProject
+   OpenFolder
+   ShowWindow
+   SelectedProject
+End Enum
+
+Public Class StartLauncherWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   ' lista dei file recenti da visualizzare
+   Private m_RecentFileList As New ObservableCollection(Of FileNameLsBxItem)
+
+   Private m_CurrSelection As MODE_LAUNCHER
+   Public Property CurrSelection As MODE_LAUNCHER
+      Get
+         Return m_CurrSelection
+      End Get
+      Set(value As MODE_LAUNCHER)
+         m_CurrSelection = value
+      End Set
+   End Property
+
+   Private m_SelPath As String = String.Empty
+   Public ReadOnly Property SelPath As String
+      Get
+         Return m_SelPath
+      End Get
+   End Property
+
+   Public Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   '--------------------------- lista dei file recenti -----------------------------------------------------------------------
+   Private Class FileNameLsBxItem
+      Implements INotifyPropertyChanged
+
+      Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged
+
+      Private m_sDate As String
+      Private m_sName As String
+
+      Public Property sDate As String
+         Get
+            Return m_sDate
+         End Get
+         Set(value As String)
+            m_sDate = value
+         End Set
+      End Property
+
+      Public Property Name As String
+         Get
+            Return m_sName
+         End Get
+         Set(value As String)
+            If value <> m_sName Then
+               m_sName = value
+               NotifyPropertyChanged("Name")
+            End If
+         End Set
+      End Property
+
+      Public ReadOnly Property GraphicName As String
+         Get
+            ' recupero il nome del file con estensione, altrimenti -> Path.GetFileNameWithoutExtension(m_sName)
+            Return Path.GetFileNameWithoutExtension(m_sName)
+         End Get
+      End Property
+
+
+      Sub New(Name As String, dDate As Date)
+         Me.m_sName = Name
+         Me.m_sDate = dDate.ToString
+      End Sub
+
+      Public Sub NotifyPropertyChanged(propName As String)
+         RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+      End Sub
+
+   End Class
+   '--------------------------- lista dei file recenti -----------------------------------------------------------------------
+
+   ' inizializzo la finestra
+   Private Sub StartLauncherWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      FilesLsBx.ItemsSource = m_RecentFileList
+      Dim ItemFile As String = String.Empty
+      'carico la liste dei file recenti
+      Dim sFileName As String = String.Empty
+      For Each ItemFile In m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
+         sFileName = ItemFile.Replace("__", "_")
+         If Not String.IsNullOrEmpty(sFileName) Then
+            m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
+            m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
+         Else
+            m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFile)
+         End If
+      Next
+
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      ' imopposto il messaggio di avvio
+      SlectLauncherTxbl.Text = EgtMsg(91010) ' Seleziona modalità di avvio
+      FileName.Text = EgtMsg(91011)          ' Progetti recenti
+      DataFile.Text = EgtMsg(91012)          ' Ultima apertura
+      LastProject.ToolTip = EgtMsg(91013)
+      NewProject.ToolTip = EgtMsg(91014)
+      OpenFolder.ToolTip = EgtMsg(91015)
+   End Sub
+
+   ' lancio l'apertura della pagina dei progetti
+   Private Sub OpenFolder_Click(sender As Object, e As RoutedEventArgs) Handles OpenFolder.Click
+      m_CurrSelection = MODE_LAUNCHER.OpenFolder
+      EgtZoom(ZM.ALL)
+      Me.Close()
+   End Sub
+
+   ' creo un progetto nuovo
+   Private Sub NewProject_Click(sender As Object, e As RoutedEventArgs) Handles NewProject.Click
+      m_CurrSelection = MODE_LAUNCHER.NewProject
+      EgtZoom(ZM.ALL)
+      Me.Close()
+   End Sub
+
+   ' Ultimo progetto
+   Private Sub LastProject_Click(sender As Object, e As RoutedEventArgs) Handles LastProject.Click
+      m_CurrSelection = MODE_LAUNCHER.LastProject
+      EgtZoom(ZM.ALL)
+      Me.Close()
+   End Sub
+
+   ' quando viene rilasciato il mouse
+   Private Sub SelectProject_MouseUp(sender As Object, e As RoutedEventArgs) Handles FilesLsBx.MouseDoubleClick, FilesLsBx.TouchUp
+      ' recupero il nome selezionato
+      m_SelPath = FilesLsBx.SelectedItem.Name
+      m_CurrSelection = MODE_LAUNCHER.SelectedProject
+      EgtZoom(ZM.ALL)
+      Me.Close()
+   End Sub
+
+End Class

Project/StartLauncheWDr.xaml.vb

@@ -1,77 +0,0 @@
-Imports EgtUILib
-Imports EgtWPFLib
-Public Class StartLauncherWD
-
-   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-
-   Public Enum MODE_LAUNCHER As Integer
-      OpenFolder = 0
-      NewProject = 1
-      LastProject = 2
-      SelectedProject = 3
-   End Enum
-
-   Private m_CurrSelection As MODE_LAUNCHER
-   Public ReadOnly Property CurrSelection As MODE_LAUNCHER
-      Get
-         Return m_CurrSelection
-      End Get
-   End Property
-
-   Private m_SelPath As String = String.Empty
-   Public ReadOnly Property SelPath As String
-      Get
-         Return m_SelPath
-      End Get
-   End Property
-
-   Public Sub New(Owner As Window)
-      Me.Owner = Owner
-      InitializeComponent()
-   End Sub
-
-   ' inizializzo la finestra
-   Private Sub StartLauncherWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' carico la liste dei file recenti
-      FilesLsBx.ItemsSource = m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
-      ' posiziono la fistra in centro alla pagina
-      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
-      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
-      ' imopposto il messaggio di avvio
-      SlectLauncherTxbl.Text = "Seleziona modalità di avvio"
-   End Sub
-
-   ' lancio l'apertura della pagina dei progetti
-   Private Sub OpenFolder_Click(sender As Object, e As RoutedEventArgs) Handles OpenFolder.Click
-      m_CurrSelection = MODE_LAUNCHER.OpenFolder
-      m_MainWindow.m_PrevActivePage = m_MainWindow.m_ActivePage
-      ' Passo alla pagina di apertura con preview
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.Open
-      Me.Close()
-   End Sub
-
-   ' creo un progetto nuovo
-   Private Sub NewProject_Click(sender As Object, e As RoutedEventArgs) Handles NewProject.Click
-      m_CurrSelection = MODE_LAUNCHER.NewProject
-      EgtZoom(ZM.ALL)
-      Me.Close()
-   End Sub
-
-   ' Ultimo progetto
-   Private Sub LastProject_Click(sender As Object, e As RoutedEventArgs) Handles LastProject.Click
-      m_CurrSelection = MODE_LAUNCHER.LastProject
-      EgtZoom(ZM.ALL)
-      Me.Close()
-   End Sub
-
-   ' quando viene rilasciato il mouse
-   Private Sub SelectProject_MouseUp(sender As Object, e As RoutedEventArgs) Handles FilesLsBx.MouseDoubleClick, FilesLsBx.TouchUp
-      m_SelPath = FilesLsBx.SelectedItem
-      m_CurrSelection = MODE_LAUNCHER.SelectedProject
-      EgtZoom(ZM.ALL)
-      Me.Close()
-   End Sub
-
-End Class

RawPhoto/ChooseMachining.xaml

@@ -20,9 +20,11 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
+             <!--riga di margine lasciata a fine pagina-->
             <RowDefinition Height="0.5*"/>
          </Grid.RowDefinitions>
 
+          <!--TAGLIO-->
          <TextBlock Name="CurrSawingTxBl" Grid.Column="1" Grid.Row="0"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
          <ComboBox Name="CurrSawingCmBx" Grid.Column="1" Grid.Row="1">
@@ -33,6 +35,7 @@
             </ComboBox.ItemTemplate>
          </ComboBox>
 
+          <!--LAVORAZIONE SECONDARIA-->
          <TextBlock Name="AuxiliaryMachiningTxBl" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
          <ComboBox Name="AuxiliaryMachiningCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">
@@ -43,6 +46,7 @@
             </ComboBox.ItemTemplate>
          </ComboBox>
 
+          <!--FORATURA-->
          <TextBlock Name="CurrDrillingTxBl" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
          <ComboBox Name="CurrDrillingCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">
@@ -53,6 +57,7 @@
             </ComboBox.ItemTemplate>
          </ComboBox>
 
+          <!--FRESATURA-->
          <TextBlock Name="CurrMillingTxBl" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
          <ComboBox Name="CurrMillingCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">
@@ -63,16 +68,47 @@
             </ComboBox.ItemTemplate>
          </ComboBox>
 
-         <TextBlock Name="CurrWJettingTxBl" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
-         <ComboBox Name="CurrWJettingCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" FontSize="20" />
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+          <!--SVUOTATURA-->
+          <TextBlock Name="CurrPocketingTxBl" Grid.Column="1" Grid.Row="2"
+          Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
+          <ComboBox Name="CurrPocketingCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">
+              <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                      <TextBlock Text="{Binding}" FontSize="20" />
+                  </DataTemplate>
+              </ComboBox.ItemTemplate>
+          </ComboBox>
 
+            <!--WATERJET-->
+            <TextBlock Name="CurrWJettingTxBl" Grid.Column="1" Grid.Row="2"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
+
+            <Grid Name="WaterJettingUGrd" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="4.5*"/>
+                    <ColumnDefinition Width="0.2*"/>
+                    <ColumnDefinition Width="2*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+                <ComboBox Name="CurrWJettingCmBx" Grid.Column="0" Visibility="Hidden">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" FontSize="20" />
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+                <ComboBox Name="CurrWJettingQualityCmBx" Grid.Column="2" Visibility="Hidden">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" FontSize="20" />
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+            </Grid>
+
+            <!--Bottoni Conferma/Cancel -->
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>