Correzione apertura programma da progetto

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -107,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/FiloTopUC.xaml.vb

@@ -39,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

MainWindow.xaml.vb

@@ -1226,7 +1226,8 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.5.1")>
-<Assembly: AssemblyFileVersion("2.5.5.1")>
+<Assembly: AssemblyVersion("2.5.5.2")>
+<Assembly: AssemblyFileVersion("2.5.5.2")>

Project/OpenPageUC.xaml.vb

@@ -491,7 +491,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib
+Imports OmagCUT.VeinMatchingWindow
 
 Public Class VeinMatchingWindow
 
@@ -19,6 +20,11 @@ Public Class VeinMatchingWindow
    Private m_nIdToSel As Integer = GDB_ID.NULL
    Private m_nIdToDesel As Integer = GDB_ID.NULL
 
+   Enum ALETTE
+      F = 2
+      A = 1
+   End Enum
+
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
       VeinMatchingSceneHost.Child = VeinMatchingScene
@@ -267,7 +273,7 @@ Friend Module VeinMatching
       Dim nRegId As Integer = EgtGetFirstInGroup(nRegLayId)
       While nRegId <> GDB_ID.NULL
          If EgtGetType(nRegId) = GDB_TY.SRF_FRGN Then
-               Exit While
+            Exit While
          End If
          nRegId = EgtGetNext(nRegId)
       End While
@@ -364,19 +370,21 @@ Friend Module VeinMatching
       ' Imposto il contesto del progetto
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Riattivo il gruppo di lavoro
-      EgtSetCurrMachGroup( EgtGetFirstMachGroup())
+      EgtSetCurrMachGroup(EgtGetFirstMachGroup())
       ' Verifico quali pezzi sono nel grezzo, per dichiararlo al VM
-      nId = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+      nId = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
       While nId <> GDB_ID.NULL
          ' Dichiaro pezzo nel grezzo per VM
-         VeinMatching.OnInsertPartInRaw( nId)
+         VeinMatching.OnInsertPartInRaw(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPartInRawPart(nId)
       End While
       ' Ripristino visualizzazione di eventuali pezzi in parcheggio
       ShowParkedParts()
       ' Ripristino il contesto corrente
-      EgtSetCurrentContext( nCurrCtx)
+      EgtSetCurrentContext(nCurrCtx)
+
+      ' EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyVeinMatch.nge", NGE.TEXT)
       Return True
    End Function
 
@@ -422,11 +430,11 @@ Friend Module VeinMatching
       nCurrId = EgtGetFirstNameInGroup(nVeinId2, NAME_PREVIEW)
       EgtSetStatus(nCurrId, GDB_ST.OFF)
       ' Se esiste OutLoop.orig OutLoop -> OutLoop.mach e OutLoop.orig -> OutLoop
-      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP & ".orig")
+      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP & ".orig")
       If nOutLoopOrig <> GDB_ID.NULL Then
-         Dim nOutLoop As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP)
-         EgtSetName( nOutLoop, NAME_OUTLOOP & ".mach")
-         EgtSetName( nOutLoopOrig, NAME_OUTLOOP)
+         Dim nOutLoop As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP)
+         EgtSetName(nOutLoop, NAME_OUTLOOP & ".mach")
+         EgtSetName(nOutLoopOrig, NAME_OUTLOOP)
       End If
       ' Se necessario, ripristino il contesto originale
       If nCurrCtx > 0 Then EgtSetCurrentContext(nCurrCtx)
@@ -555,8 +563,8 @@ Friend Module VeinMatching
 
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
-         End If
-         EgtDraw()
+      End If
+      EgtDraw()
       EgtSetCurrentContext(nMainCtx)
       Return True
    End Function
@@ -1039,37 +1047,44 @@ Friend Module VeinMatching
    End Function
 
    Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
-
+      ' A: alzatina, F: frontalino
       Dim nType As Integer
       If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
 
-      Dim ptSRef, ptERef, ptE As Point3d
+      Dim ptSRef, ptERef, ptS, ptE As Point3d
+      ' Piano cucina
       If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
       If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      ' AlzFront
+      If Not EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptS) Then Return False
       If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
 
+      ' vettore lato cucina
+      Dim vtRotRef As Vector3d = ptERef - ptSRef
+      ' vettore lato AlzFront
+      Dim vtRot As Vector3d = ptE - ptS
+
       ' ruoto il solido intorno al lato di riferimento
-      Dim vtRot As Vector3d = ptERef - ptSRef
-      If nType = 1 Then
-         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
-      ElseIf nType = 2 Then
+      If nType = ALETTE.A Then
          EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+      ElseIf nType = ALETTE.F Then
+         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
       End If
 
       ' punto di riferimento per la traslazione sul solido
       Dim ptSolid As Point3d
-      If nType = 1 Then
+      If nType = ALETTE.A Then
          ' cerco id della curva che definisce la front face
          Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
          Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
-         EgtStartPoint(nFrontCrvId, ptSolid)
-      ElseIf nType = 2 Then
-         EgtStartPoint(Item.SideId, ptSolid)
+         EgtStartPoint(nFrontCrvId, GDB_ID.ROOT, ptSolid)
+      ElseIf nType = ALETTE.F Then
+         EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptSolid)
       End If
 
-      Dim ItemFrame As New Frame3d
-      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
-      ptSolid.ToGlob(ItemFrame)
+      ' Dim ItemFrame As New Frame3d
+      ' If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ' ptSolid.ToGlob(ItemFrame)
 
       'punto di riferimento per la traslazione sul piano cucina
       Dim ptKitchen As Point3d = ptERef
@@ -1077,6 +1092,16 @@ Friend Module VeinMatching
       Dim vtMove As Vector3d = ptKitchen - ptSolid
       EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
 
+      ' eventualmente ruoto per allineare l'alzatina al piano cucina
+      Dim dLRef, dAngVRef, dAngHRef As Double
+      vtRotRef.ToSpherical(dLRef, dAngVRef, dAngHRef)
+      Dim dL, dAngV, dAngH As Double
+      vtRot.Rotate(Vector3d.Z_AX, 180)
+      vtRot.ToSpherical(dL, dAngV, dAngH)
+      Dim dDelta As Double = dAngHRef - dAngH
+      If Math.Abs(dDelta) < EPS_ANG_SMALL Then Return True
+      EgtRotate(Item.PartId, ptKitchen, Vector3d.Z_AX, dDelta, GDB_RT.GLOB)
+
       Return True
    End Function
 
@@ -1206,7 +1231,7 @@ Friend Module VeinMatching
       ' Se necessario, cambio contesto
       If m_nVeinCtx <> nCurrCtx Then
          If EgtSetCurrentContext(m_nVeinCtx) Then
-            Return If( nCurrCtx > 0, nCurrCtx, -2)
+            Return If(nCurrCtx > 0, nCurrCtx, -2)
          Else
             Return 0
          End If
@@ -1268,7 +1293,7 @@ Friend Module VeinMatching
       While nId <> GDB_ID.NULL
          Dim nOriId As Integer
          If EgtGetInfo(nId, KEY_ORI_ID, nOriId) AndAlso nOriId = nPartId Then
-               Exit While
+            Exit While
          End If
          nId = EgtGetNextPart(nId)
       End While