Merge branch 'Correzione_Incidi_(Ovale)'

- piccola correzione su abilitazione Cornici.

CAM/CamAuto.vb

@@ -674,6 +674,9 @@ Friend Module CamAuto
       End If
       ' Lo sposto dalla lavorazione al pezzo
       Dim nId As Integer = EgtGetFirstInGroup(nMchPvId)
+
+      If nId = GDB_ID.NULL Then Return False
+
       While nId <> GDB_ID.NULL
          EgtRelocateGlob(nId, nPartPvId)
          nId = EgtGetFirstInGroup(nMchPvId)

CadCuts/CSVFile.vb

@@ -19,6 +19,14 @@ Friend Module CSVFile
       Public m_dDimX As Double = 0
       Public m_dDimY As Double = 0
       Public m_dTh As Double = 0
+      Public m_dAng1 As Double = 0
+      Public m_dHeel1 As Double = 0
+      Public m_dAng2 As Double = 0
+      Public m_dHeel2 As Double = 0
+      Public m_dAng3 As Double = 0
+      Public m_dHeel3 As Double = 0
+      Public m_dAng4 As Double = 0
+      Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
    End Class
@@ -62,6 +70,14 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
          ' inserisco in lista
          CsvPartList.Add(OnePart)
@@ -147,6 +163,22 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
                   End If
@@ -188,6 +220,14 @@ Friend Module CSVFile
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
          Next
          ' Terminatore

CadCuts/CSVPage.xaml.vb

@@ -424,10 +424,14 @@ Public Class CSVPage
          ' Definizione variabili
          Dim dDimX = CurrPart.m_dDimX
          Dim dDimY = CurrPart.m_dDimY
+         Dim dAng = New Double() {CurrPart.m_dAng1,CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4}
+         Dim dHeel = New Double() {CurrPart.m_dHeel1,CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4}
          If bMaxDimOnX And dDimY > dDimX Then
             Dim dTemp As Double = dDimX
             dDimX = dDimY
             dDimY = dTemp
+            dAng = New Double() {CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4,CurrPart.m_dAng1}
+            dHeel = New Double() {CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4,CurrPart.m_dHeel1}
          End If
          EgtLuaSetGlobNumVar("CMP.V1", dDimX)
          EgtLuaSetGlobNumVar("CMP.V2", dDimY)
@@ -439,7 +443,7 @@ Public Class CSVPage
          If nId = GDB_ID.NULL Then Continue For
          CurrPart.m_nId = nId
          ' Muovo la regione in Z per evitare problemi in visualizzazione
-         Dim nRegId = EgtGetFirstNameInGroup(nId, NAME_REGION)
+         Dim nRegId As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
          EgtMove(nRegId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
          ' Eventuale testo per indicare il sopra
          If Not bMaxDimOnX Then
@@ -447,6 +451,31 @@ Public Class CSVPage
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
             EgtSetColor(nText, New Color3d( 0, 0, 0))
          End If
+         ' Inserisco eventuali angoli di fianco
+         Dim bSideAngs As Boolean = False
+         Dim nOutLoopId As Integer = EgtGetFirstNameInGroup( nId, NAME_OUTLOOP)
+         For nSide As Integer = 1 To 4
+            Dim dSideAng As Double = dAng( nSide - 1)
+            Dim dSideHeel As Double = dHeel( nSide - 1)
+            If Math.Abs( dSideAng) > EPS_ANG_SMALL Then
+               Dim nEntId As Integer = EgtGetFirstNameInGroup( nOutLoopId, "A" & nSide.ToString())
+               If nEntId <> GDB_ID.NULL Then
+                  bSideAngs = True
+                  ' Assegno valori
+                  EgtSetInfo(nEntId, INFO_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_HEEL, dSideHeel)
+               End If
+            End If
+         Next
+         ' Creo layer per testi nesting
+         If bSideAngs Then
+            Dim TextLayId As Integer = EgtCreateGroup(nId)
+            EgtSetName(TextLayId, SIDE_ANGLE_LAYER)
+            EgtSetColor(TextLayId, New Color3d(0, 0, 128))
+            ' Opero su geometria esterna pezzo
+            SideAngle.WriteSideAngleOnLoop(nOutLoopId, TextLayId)
+         End If
          ' Aggiusto per lavorazioni
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine

CadCuts/NestPageUC.xaml.vb

@@ -1168,7 +1168,7 @@ Public Class NestPageUC
          nLayId = EgtGetNextName(nLayId, NAME_INLOOP)
       End While
       ' Aggiorno le entità con tallone e quelle con angolo esterno
-      Const AGG_DEPTH As Double = 2.0
+      Const AGG_DEPTH As Double = 0.75
       Dim bSizeOnTop As Boolean = ( GetPrivateProfileInt( S_SIDES, K_SIZEALWAYSONTOP, 0, m_MainWindow.GetIniFile()) <> 0) 
       For Each nEnt As Integer In vEnt
          ' Se aggiornamento vietato, vado oltre
@@ -1194,12 +1194,14 @@ Public Class NestPageUC
                      EgtSetInfo(nEnt, INFO_OFFSET2, 0)
                   End If
                   EgtSetInfo(nEnt, INFO_DEPTH2, (dTh - dHeel) + AGG_DEPTH)
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
                ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
             ' Inclinazione interna
             Else
@@ -1208,12 +1210,14 @@ Public Class NestPageUC
                   EgtSetInfo(nEnt, INFO_OFFSET, dHeel * Math.Tan(-dSideAng * Math.PI / 180))
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtSetInfo(nEnt, INFO_DEPTH2, dHeel + AGG_DEPTH)
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
                ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET)
                   EgtRemoveInfo(nEnt, INFO_SIDE_ANGLE2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
             End If
          ' Se altrimenti inclinazione esterna

CadCuts/SplitAuto.vb

@@ -166,6 +166,17 @@ Public Module SplitAuto
    End Function
 
    '-----------------------------------------------------------------------------------------------
+   ' calcolo il numero di tipi di lavorazioni
+   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
+      If MachSplit.m_nType = MCH_OY.SAWING Then
+         nCountSawing += 1
+      ElseIf MachSplit.m_nType = MCH_OY.WATERJETTING Then
+         nCountWaterjetting += 1
+      Else
+         nCountOtherMachining += 1
+      End If
+   End Sub
+
    Friend Sub ColorMachining(MachSplit As SplitMach, Optional bReset As Boolean = False)
       EgtDisableModified()
       ' Assegno stato

CadCuts/SplitPageUC.xaml.vb

@@ -6,6 +6,9 @@ Public Class SplitPageUC
 
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
    Private m_bByHand As Boolean = True
    ' Abilitazione movimento finale pezzi su tavola ausiliaria
@@ -13,6 +16,16 @@ Public Class SplitPageUC
    ' Stato
    Private m_nCurrPhase As Integer = 0
    Private m_MachiningList As New List(Of SplitMach)
+
+   ' numero di lavorazioni di tipo lama
+   Private m_nCountSawing As Integer = 0
+   ' numero di lavprazioni di tipo waterjet
+   Private m_nCountWaterjetting As Integer = 0
+   ' altri tipi di lavorazioni (Foro/Fresa)
+   Private m_nCountOtherMachining As Integer = 0
+   ' verifico che le lavorazioni selezionate siano omogenee (con lo stesso utensile)
+   Private m_bAreHomogeneous As Boolean = False
+
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    'Private m_CurrInd As Integer = -1
    'Private m_CurrItems As New List(Of NameIdLsBxItem)
@@ -23,6 +36,13 @@ Public Class SplitPageUC
    Private m_nNbrGrpId As Integer = GDB_ID.NULL
    Private m_bToNext As Boolean = False
    Friend m_bOnAuxTab As Boolean = False
+   ' Drag
+   Private m_nDragInd As Integer = -1
+   Private m_nDragType As Integer = 0           '0=niente, 1=attacco, 2=uscita
+   Private m_ptDragPrev As Point3d
+   Private m_bDragging As Boolean = False
+   ' Selected cut
+   Private m_nSelected As Integer = GDB_ID.NULL
 
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
@@ -53,6 +73,10 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub SplitPageUC_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      m_bActive = True
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_nDragInd = -1
+      m_nDragType = 0
       ' Leggo tipo movimento grezzi
       m_bByHand = (EgtGetHeadId(VACUUM_HEAD) = GDB_ID.NULL Or
                   Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.AUTO_MANIP) Or
@@ -79,7 +103,7 @@ Public Class SplitPageUC
       If Not m_bShow Then
          If m_MainWindow.m_CurrentMachine.WaterJettingActive Then ResetAllMachinings()
          If SortAllMachinings() Then m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
-         If m_MainWindow.m_CurrentMachine.WaterJettingActive Then         
+         If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
             Dim bModif As Boolean = TestAllMachiningsForStrict()
             If bModif Then m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(90321)) 'Ridotte alcune lavorazioni per evitare interferenze
          End If
@@ -97,12 +121,18 @@ Public Class SplitPageUC
       ShowOnePhaseMachiningPreview(m_nCurrPhase)
       ' Preparo la lista delle lavorazioni
       CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      ' azzero i contatori delle lavorazioni
+      m_nCountSawing = 0
+      m_nCountWaterjetting = 0
+      m_nCountOtherMachining = 0
       ' Aggiorno visualizzazione delle lavorazioni
       For nI As Integer = 0 To m_MachiningList.Count() - 1
          ' sistemo colore
          ColorMachining(m_MachiningList(nI))
          ' assegno numerazione
          NumberDirectionMachining(nI)
+         ' conto il numero di tipi di lavorazioni
+         CountMachiningType(m_MachiningList(nI), m_nCountSawing, m_nCountWaterjetting, m_nCountOtherMachining)
       Next
       ' Preparo la lista degli Item
       ShowMachiningList()
@@ -138,33 +168,222 @@ Public Class SplitPageUC
             Dim sText As String = String.Empty
             If Math.Abs(Mach.m_dSideAng) < EPS_ANG_SMALL Then
                sText = EgtMsg(90791) & " " & i.ToString()
-               If Mach.m_sLay = NAME_ONPATH Then AddTopText( sText)
+               If Mach.m_sLay = NAME_ONPATH Then AddTopText(sText)
             Else
-               sText = EgtMsg(90791) & " " & i.ToString() & "  " & DoubleToString( Mach.m_dSideAng, 2) & "°"
+               sText = EgtMsg(90791) & " " & i.ToString() & "  " & DoubleToString(Mach.m_dSideAng, 2) & "°"
             End If
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled))
+            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.SAWING))
          ElseIf Mach.m_nType = MCH_OY.DRILLING Then       ' Foratura
             Dim sText As String = EgtMsg(90792) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled))
+            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.DRILLING))
          ElseIf Mach.m_nType = MCH_OY.MILLING Then        ' Fresatura
             Dim sText As String = EgtMsg(90793) & " " & i.ToString()
-            If Mach.m_sLay = NAME_ONPATH Then AddTopText( sText)
-            If Mach.m_bPause Then AddPauseText( sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled))
+            If Mach.m_sLay = NAME_ONPATH Then AddTopText(sText)
+            If Mach.m_bPause Then AddPauseText(sText)
+            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.MILLING))
          ElseIf Mach.m_nType = MCH_OY.POCKETING Then      ' Svuotatura
             Dim sText As String = EgtMsg(90796) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled))
+            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.POCKETING))
          ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then   ' Waterjet
             Dim sText As String = EgtMsg(90797) & " " & i.ToString()
             If Mach.m_bPause Then AddPauseText(sText)
-            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled))
+            m_ItemList.Add(New NameIdLsBxItem(sText, i - 1, Mach.m_bEnabled, MCH_OY.WATERJETTING))
          End If
       Next
    End Sub
 
+   Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
+      ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
+      If Not m_bActive OrElse m_bShow Then Return
+      ' Si può selezionare solo con il tasto sinistro e se stato NULL
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
+         Return
+      End If
+      ' Reset drag
+      m_nDragInd = -1
+      m_nDragType = 0
+      ' Reset selection interface
+      m_nSelected = GDB_ID.NULL
+      ' Verifico se selezionato estremo di taglio con lama
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSel As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
+      Dim nId As Integer = EgtGetFirstObjInSelWin()
+      While nId <> GDB_ID.NULL
+         ' Verifico sia un attacco o uscita di taglio con lama
+         Dim nType As Integer = 0
+         Dim sName As String = ""
+         EgtGetName(nId, sName)
+         If String.Compare(sName, NAME_PV_PRECUT) = 0 Then
+            nType = 1
+         ElseIf String.Compare(sName, NAME_PV_POSTCUT) = 0 Then
+            nType = 2
+         ElseIf String.Compare(sName, NAME_PV_CUT) = 0 Then
+            nType = 3
+         End If
+         If nType = 1 Or nType = 2 Then
+            Dim nPvId As Integer = EgtGetParent(EgtGetParent(nId))
+            Dim nMchId As Integer = GDB_ID.NULL
+            If EgtGetInfo(nPvId, "MId", nMchId) Then
+               For nInd As Integer = 0 To m_MachiningList.Count() - 1
+                  If m_MachiningList(nInd).m_nId = nMchId Then
+                     m_nDragInd = nInd
+                     m_nDragType = nType
+                  End If
+                  For nJ As Integer = 0 To m_MachiningList(nInd).m_vOthId.Count() - 1
+                     If m_MachiningList(nInd).m_vOthId(nJ) = nMchId Then
+                        m_nDragInd = nInd
+                        m_nDragType = nType
+                        Exit For
+                     End If
+                  Next
+                  If m_nDragInd >= 0 Then
+                     ' Assegno l'id dell'elemnto selezionato
+                     m_nSelected = m_nDragInd
+                     Exit For
+                  End If
+               Next
+            End If
+            If m_nDragInd >= 0 Then
+               ' Assegno l'id dell'elemnto selezionato
+               m_nSelected = m_nDragInd
+               Exit While
+            End If
+         ElseIf nType = 3 Then
+            Dim nPvId As Integer = EgtGetParent(EgtGetParent(nId))
+            Dim nMchId As Integer = GDB_ID.NULL
+            If EgtGetInfo(nPvId, "MId", nMchId) Then
+               For nInd As Integer = 0 To m_MachiningList.Count() - 1
+                  If m_MachiningList(nInd).m_nId = nMchId Then
+                     m_nSelected = nInd
+                  End If
+                  For nJ As Integer = 0 To m_MachiningList(nInd).m_vOthId.Count() - 1
+                     If m_MachiningList(nInd).m_vOthId(nJ) = nMchId Then
+                        m_nSelected = nInd
+                        Exit For
+                     End If
+                  Next
+                  If m_nSelected >= 0 Then Exit For
+               Next
+            End If
+            If m_nSelected >= 0 Then Exit While
+         End If
+         nId = EgtGetNextObjInSelWin()
+      End While
+      ' Sistemazioni per drag
+      If m_nSelected >= 0 AndAlso EgtUnProjectPoint(e.Location, m_ptDragPrev) Then
+         MachiningLsBx.SelectedIndex = m_nSelected
+      Else
+         m_nDragInd = -1
+         m_nDragType = 0
+         m_nSelected = GDB_ID.NULL
+      End If
+   End Sub
+
+   Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseMoveScene
+      ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
+      If Not m_bActive OrElse m_bShow Then Return
+      ' Se drag non abilitato o in corso
+      If m_nDragInd = -1L Or m_bDragging Then Return
+      m_bDragging = True
+      Dim nOperId As Integer = m_MachiningList(m_nDragInd).m_nId
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+      ' Ricavo il vettore di movimento e la variazione di lunghezza
+      Dim vtMove As Vector3d = ptCurr - m_ptDragPrev
+      Dim dDelta = vtMove * m_MachiningList(m_nDragInd).m_vtDir
+      If m_nDragType = 1 Then
+         Dim dOrigUsal As Double = 0
+         Dim dUsal As Double
+         ' ----------------------- REPEAT -----------------------
+         Do
+            dDelta = -dDelta
+            ' Leggo il valore salvato nella geometria
+            EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
+            dUsal = dOrigUsal + dDelta
+            ' Se c'è limite alla lunghezza libera
+            If m_MachiningList(m_nDragInd).m_dStartFreeLen < FREELEN_INF Then
+               ' Recupero sicurezza in corner interno
+               Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+               ' Recupero lunghezza baffo del taglio
+               Dim nPvId As Integer = GDB_ID.NULL
+               EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+               Dim dDT As Double = 0
+               EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+               dUsal = Math.Min(dUsal, m_MachiningList(m_nDragInd).m_dStartFreeLen - dDT - dCornerSafety)
+            End If
+            ' Modifica della lavorazione
+            EgtSetCurrMachining(nOperId)
+            Dim dAddLen As Double = 0
+            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
+
+            If dAddLen - dOrigUsal < -10 * EPS_SMALL Then
+               m_bDragging = False
+               Return
+            End If
+            EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
+            EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
+         Loop Until UpdateMachiningPreview(m_MachiningList(m_nDragInd).m_nId, True)
+         ' ----------------------- REPEAT (solo se il segmento scompare) -----------------------
+      Else
+         Dim dOrigUeal As Double = 0
+         Dim dUeal As Double
+         dDelta = -dDelta
+         Do
+            dDelta = -dDelta
+            ' Leggo il valore salvato nella geometria
+            EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
+            dUeal = dOrigUeal + dDelta
+            ' Se c'è limite alla lunghezza libera
+            If m_MachiningList(m_nDragInd).m_dEndFreeLen < FREELEN_INF Then
+               ' Recupero sicurezza in corner interno
+               Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+               ' Recupero lunghezza baffo del taglio
+               Dim nPvId As Integer = GDB_ID.NULL
+               EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+               Dim dDT As Double = 0
+               EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+               dUeal = Math.Min(dUeal, m_MachiningList(m_nDragInd).m_dEndFreeLen - dDT - dCornerSafety)
+            End If
+            ' Modifica della lavorazione
+            EgtSetCurrMachining(nOperId)
+            Dim dAddLen As Double = 0
+            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
+
+            If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               m_bDragging = False
+               Return
+            End If
+            EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
+            EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUeal)
+         Loop Until UpdateMachiningPreview(m_MachiningList(m_nDragInd).m_nId, True)
+      End If
+      ' verifico interferenza
+      EgtVerifyMachining(m_MachiningList(m_nDragInd).m_nId, m_MachiningList(m_nDragInd).m_nInterf)
+      ColorMachining(m_MachiningList(m_nDragInd))
+      ColorNumberArrow(m_nDragInd)
+      ' Aggiorno visualizzazione
+      EgtDraw()
+      m_bModified = True
+      ' Aggiorno punto e stato di drag
+      m_ptDragPrev = ptCurr
+      m_bDragging = False
+   End Sub
+
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
+      If Not m_bActive OrElse m_bShow Then Return
+      ' Se drag in corso
+      If m_nDragInd >= 0 Then
+         m_nDragInd = -1
+      End If
+   End Sub
+
    Private Sub AddPauseText(ByRef sName As String)
       sName &= "  " & EgtMsg(MSG_SPLITPAGEUC + 32) ' Pausa
    End Sub
@@ -180,11 +399,16 @@ Public Class SplitPageUC
 
    Private Sub MachiningLsBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles MachiningLsBx.SelectionChanged
       If MachiningLsBx.SelectedItems.Count = 0 Then Return
+      If MachiningLsBx.SelectedItems.Count = 1 Then m_bAreHomogeneous = True
       ' creo lista ordinata dei selezionati
       Dim ItemList As New List(Of NameIdLsBxItem)
       For Each Item As NameIdLsBxItem In MachiningLsBx.SelectedItems
          ItemList.Add(Item)
       Next
+
+      ' verifico che le lavorazioni siano dello stesso tipo
+      VerifyHomogenousMachining(ItemList)
+
       ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(m_ItemList.IndexOf(x), m_ItemList.IndexOf(y)))
       ' verifico che siano contigui
       Dim bContigus As Boolean = False
@@ -287,8 +511,14 @@ Public Class SplitPageUC
       EgtDraw()
       ' Imposto flag di modifica
       m_bModified = True
-      ' Abilitazione bottone Next
-      EnableButtons()
+
+      ' recupero l'elenco degli elementi selezionati
+      Dim ItemList As New List(Of NameIdLsBxItem)
+      For Each Item As NameIdLsBxItem In MachiningLsBx.SelectedItems
+         ItemList.Add(Item)
+      Next
+
+      VerifyHomogenousMachining(ItemList)
    End Sub
 
    Private Sub AllOnBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllOnBtn.Click
@@ -772,26 +1002,37 @@ Public Class SplitPageUC
                bFirstInd = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            Dim bRepeat As Boolean = False
+            Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
+                  ' Recupero sicurezza in corner interno
+                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                  ' Recupero lunghezza baffo del taglio
+                  Dim nPvId As Integer = GDB_ID.NULL
+                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                  Dim dDT As Double = 0
+                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                  dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+               End If
+               ' Modifica della lavorazione
+               EgtSetCurrMachining(nOperId)
+               Dim dAddLen As Double = 0
+               EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
+               ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
+               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then
+                  Return
+               End If
+               EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
+               EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
+               bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               If bRepeat Then
+                  EgtSetMachiningParam(MCH_MP.STARTADDLEN, dOrigUsal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
+                  dUsal = dOrigUsal
+               End If
+            Loop Until Not bRepeat
 
-            ' Se c'è limite alla lunghezza libera
-            If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
-               ' Recupero sicurezza in corner interno
-               Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-               ' Recupero lunghezza baffo del taglio
-               Dim nPvId As Integer = GDB_ID.NULL
-               EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-               Dim dDT As Double = 0
-               EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
-               dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
-            End If
-            ' Modifica della lavorazione
-            EgtSetCurrMachining(nOperId)
-            Dim dAddLen As Double = 0
-            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-            If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
-            EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
-            EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
             ColorMachining(m_MachiningList(nI))
@@ -903,7 +1144,7 @@ Public Class SplitPageUC
       ' Recupero la lavorazione corrente
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
-      For Index As integer = m_CurrFirstInd To m_CurrLastInd
+      For Index As Integer = m_CurrFirstInd To m_CurrLastInd
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -924,26 +1165,38 @@ Public Class SplitPageUC
                bFirstInd = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            Dim bRepeat As Boolean = False
+            Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
+                  ' Recupero sicurezza in corner interno
+                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                  ' Recupero lunghezza baffo del taglio
+                  Dim nPvId As Integer = GDB_ID.NULL
+                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                  Dim dDT As Double = 0
+                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                  dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+               End If
+
+               ' Modifica della lavorazione
+               EgtSetCurrMachining(nOperId)
+               Dim dAddLen As Double = 0
+               EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
+               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+                  Return
+               End If
+               EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
+               EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUeal)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               If bRepeat Then
+                  EgtSetMachiningParam(MCH_MP.STARTADDLEN, dOrigUeal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUeal)
+                  dUeal = dOrigUeal
+               End If
+            Loop Until Not bRepeat
 
-            ' Se c'è limite alla lunghezza libera
-            If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
-               ' Recupero sicurezza in corner interno
-               Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-               ' Recupero lunghezza baffo del taglio
-               Dim nPvId As Integer = GDB_ID.NULL
-               EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-               Dim dDT As Double = 0
-               EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
-               dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
-            End If
-            ' Modifica della lavorazione
-            EgtSetCurrMachining(nOperId)
-            Dim dAddLen As Double = 0
-            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-            If dAddLen - dOrigUeal < -10 * EPS_SMALL Then Return
-            EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
-            EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUeal)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
             ColorMachining(m_MachiningList(nI))
@@ -1027,40 +1280,40 @@ Public Class SplitPageUC
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
-         If m_MachiningList( nI).m_nType <> MCH_OY.SAWING Then Continue For
+         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
          ' Non si possono invertire i tagli di lama inclinati
-         If Math.Abs( m_MachiningList(nI).m_dSideAng) > 0.1 Then Continue For
+         If Math.Abs(m_MachiningList(nI).m_dSideAng) > 0.1 Then Continue For
          ' Se abilitata inversione automatica e quindi non invertito
-         If m_MachiningList( nI).m_bEnableInvert Then
+         If m_MachiningList(nI).m_bEnableInvert Then
             ' Inverto e disabilito inversione automatica
-            If CamAuto.InvertVerticalCut( m_MachiningList( nI).m_nId) Then
-               m_MachiningList( nI).m_bInvert = True
-               m_MachiningList( nI).m_vtDir = - m_MachiningList( nI).m_vtDir
-               m_MachiningList( nI).m_bEnableInvert = False
-               SwapStartEndData( nI)
-               ResetEnableInvert( m_MachiningList( nI).m_nEntId)
-               EgtErase( m_MachiningList( nI).m_nArrId)
-               NumberDirectionMachining( nI, False)
+            If CamAuto.InvertVerticalCut(m_MachiningList(nI).m_nId) Then
+               m_MachiningList(nI).m_bInvert = True
+               m_MachiningList(nI).m_vtDir = -m_MachiningList(nI).m_vtDir
+               m_MachiningList(nI).m_bEnableInvert = False
+               SwapStartEndData(nI)
+               ResetEnableInvert(m_MachiningList(nI).m_nEntId)
+               EgtErase(m_MachiningList(nI).m_nArrId)
+               NumberDirectionMachining(nI, False)
                EgtDraw()
             End If
-         ' se altrimenti disabilitata inversione automatica e invertito
-         ElseIf m_MachiningList( nI).m_bInvert Then
+            ' se altrimenti disabilitata inversione automatica e invertito
+         ElseIf m_MachiningList(nI).m_bInvert Then
             ' Tolgo inversione e lascio disabilitazione inv. autom.
-            If CamAuto.InvertVerticalCut( m_MachiningList( nI).m_nId) Then
-               m_MachiningList( nI).m_bInvert = False
-               m_MachiningList( nI).m_vtDir = - m_MachiningList( nI).m_vtDir
-               SwapStartEndData( nI)
-               EgtErase( m_MachiningList( nI).m_nArrId)
-               NumberDirectionMachining( nI, False)
+            If CamAuto.InvertVerticalCut(m_MachiningList(nI).m_nId) Then
+               m_MachiningList(nI).m_bInvert = False
+               m_MachiningList(nI).m_vtDir = -m_MachiningList(nI).m_vtDir
+               SwapStartEndData(nI)
+               EgtErase(m_MachiningList(nI).m_nArrId)
+               NumberDirectionMachining(nI, False)
                EgtDraw()
             End If
-         ' altrimenti disabilitata inversione automatica e non invertito
+            ' altrimenti disabilitata inversione automatica e non invertito
          Else
             ' Abilito inversione automatica e lascio non invertito
-            m_MachiningList( nI).m_bEnableInvert = True
-            SetEnableInvert( m_MachiningList( nI).m_nEntId)
-            EgtErase( m_MachiningList( nI).m_nArrId)
-            NumberDirectionMachining( nI, False)
+            m_MachiningList(nI).m_bEnableInvert = True
+            SetEnableInvert(m_MachiningList(nI).m_nEntId)
+            EgtErase(m_MachiningList(nI).m_nArrId)
+            NumberDirectionMachining(nI, False)
             EgtDraw()
          End If
       Next
@@ -1122,7 +1375,7 @@ Public Class SplitPageUC
       ' Se fase corrente è la prima, imposto partenza normale
       If m_nCurrPhase = 1 Then
          m_MainWindow.m_CurrentProjectPageUC.ResetProjectNcRestart()
-      ' Altrimenti, imposto la ripartenza dalla fase corrente
+         ' Altrimenti, imposto la ripartenza dalla fase corrente
       Else
          m_MainWindow.m_CurrentProjectPageUC.SetProjectNcRestart(m_nCurrPhase)
          m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(MSG_SPLITPAGEUC + 19) & " (" & m_nCurrPhase.ToString() & ")")
@@ -1141,7 +1394,7 @@ Public Class SplitPageUC
       ' Aggiorno le lavorazioni (eliminato sort per lasciare ordine immutato)
       If m_MainWindow.m_CurrentMachine.WaterJettingActive Then ResetAllMachinings()
       m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
-      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then         
+      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
          Dim bModif As Boolean = TestAllMachiningsForStrict()
          If bModif Then m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(90321)) 'Ridotte alcune lavorazioni per evitare interferenze
       End If
@@ -1151,8 +1404,13 @@ Public Class SplitPageUC
       HideAllMachinings()
       ' Preparo la lista delle lavorazioni e le disabilito
       CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      m_nCountSawing = 0
+      m_nCountWaterjetting = 0
+      m_nCountOtherMachining = 0
       For nI As Integer = 0 To m_MachiningList.Count() - 1
          m_MachiningList(nI).m_bEnabled = False
+         ' conto il numero di tipi di lavorazioni
+         CountMachiningType(m_MachiningList(nI), m_nCountSawing, m_nCountWaterjetting, m_nCountOtherMachining)
       Next
       ' Aggiorno visualizzazione delle lavorazioni
       EgtEmptyGroup(m_nNbrGrpId)
@@ -1171,6 +1429,7 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub SplitPageUC_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
+      m_bActive = False
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       ExitSplit(Not m_bToNext)
       EgtDraw()
@@ -1338,6 +1597,86 @@ Public Class SplitPageUC
       ModifEndBtn.IsEnabled = Not m_bShow
       InvertBtn.IsEnabled = Not m_bShow
       PauseBtn.IsEnabled = Not m_bShow And m_MainWindow.m_CurrentMachine.bEnablePause
+
+      ' nascondo i comandi che non devono essere visualizzati in funzione delle lavorazioni attive
+      If m_nCountSawing = 0 And (m_nCountWaterjetting > 0 Or m_nCountOtherMachining) Then
+         VisibilityButtonFromMachinig(MCH_OY.WATERJETTING)
+      Else
+         VisibilityButtonFromMachinig(MCH_OY.SAWING)
+      End If
+
+   End Sub
+
+   Private Sub VerifyHomogenousMachining(ItemList As List(Of NameIdLsBxItem))
+      If IsNothing(ItemList) OrElse ItemList.Count = 0 Then
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         Return
+      End If
+      Dim nSawing As Integer = 0
+      Dim nWaterjetting As Integer = 0
+      Dim nOtherMachining As Integer = 0
+      ' conto il numero di tipi di lavprazioni
+      For Each Item As NameIdLsBxItem In ItemList
+         If Item.Type = MCH_OY.SAWING Then
+            nSawing += 1
+         ElseIf Item.Type = MCH_OY.WATERJETTING Then
+            nWaterjetting += 1
+         Else
+            nOtherMachining += 1
+         End If
+      Next
+      ' verifico se le lavorazioni sono omeogenee
+      If nSawing > 0 And (nWaterjetting > 0 Or nOtherMachining > 0) Then
+         m_bAreHomogeneous = False
+         VisibilityButtonFromMachinig(MCH_OY.SAWING)
+      ElseIf nSawing = 0 And nOtherMachining > 0 And nWaterjetting > 0 Then
+         m_bAreHomogeneous = False
+         VisibilityButtonFromMachinig(MCH_OY.WATERJETTING)
+      Else
+         VisibilityButtonFromMachinig(ItemList(0).Type)
+         m_bAreHomogeneous = True
+      End If
+      ' eventualmente stampo messaggio
+      If Not m_bAreHomogeneous Then
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Lavorazioni non omogenee")
+      Else
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+   End Sub
+
+   Private Sub VisibilityButtonFromMachinig(ByVal Type As Integer)
+      If Type <> MCH_OY.SAWING Then
+         CutBtn.Visibility = Visibility.Hidden
+         CutStartBtn.Visibility = Visibility.Hidden
+         CutEndBtn.Visibility = Visibility.Hidden
+
+         OutCenStartBtn.Visibility = Visibility.Hidden
+         OutCenEndBtn.Visibility = Visibility.Hidden
+         InvertBtn.Visibility = Visibility.Hidden
+         PauseBtn.Visibility = Visibility.Hidden
+         AllOutStartBtn.Visibility = Visibility.Hidden
+         AllCenStartBtn.Visibility = Visibility.Hidden
+         AllOutEndBtn.Visibility = Visibility.Hidden
+         AllCenEndBtn.Visibility = Visibility.Hidden
+         AllExtendBtn.Visibility = Visibility.Hidden
+         AllReduceBtn.Visibility = Visibility.Hidden
+      Else
+         CutBtn.Visibility = Visibility.Visible
+         CutStartBtn.Visibility = Visibility.Visible
+         CutEndBtn.Visibility = Visibility.Visible
+
+         OutCenStartBtn.Visibility = Visibility.Visible
+         OutCenEndBtn.Visibility = Visibility.Visible
+         InvertBtn.Visibility = Visibility.Visible
+         PauseBtn.Visibility = Visibility.Visible
+         AllOutStartBtn.Visibility = Visibility.Visible
+         AllCenStartBtn.Visibility = Visibility.Visible
+         AllOutEndBtn.Visibility = Visibility.Visible
+         AllCenEndBtn.Visibility = Visibility.Visible
+         AllExtendBtn.Visibility = Visibility.Visible
+         AllReduceBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    Private Function ModifyOtherLeadIn(nI As Integer, nLiOthType As Integer) As Boolean
@@ -1572,6 +1911,7 @@ Public Class SplitPageUC
       Private m_nInd As Integer
       Private m_sName As String
       Private m_bIsActive As Boolean
+      Private m_nType As Integer
 
       Public Property Ind As Integer
          Get
@@ -1606,10 +1946,20 @@ Public Class SplitPageUC
          End Set
       End Property
 
-      Sub New(Name As String, Ind As Integer, bIsActive As Boolean)
+      Public Property Type As Integer
+         Get
+            Return m_nType
+         End Get
+         Set(value As Integer)
+            m_nType = value
+         End Set
+      End Property
+
+      Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer)
          Me.m_sName = Name
          Me.m_nInd = Ind
          Me.m_bIsActive = bIsActive
+         Me.m_nType = nType
       End Sub
 
       Public Sub NotifyPropertyChanged(propName As String)

Constants/ConstGen.vb

@@ -205,6 +205,7 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public CONST INFO_AGG2 As String = "Agg2"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone

Constants/ConstMachIni.vb

@@ -282,5 +282,6 @@
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
 
 End Module

DrawImport/AlzFrontUC.xaml.vb

@@ -281,32 +281,14 @@ Public Class AlzFrontUC
 
    ' restituisce vero se il lato possiede delle info legate al sideangle
    Private Function VerifyIsThereSideAngle(nCurrLine As Integer) As Boolean
-      Dim sInfoSideAngle As String = String.Empty
-      EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, sInfoSideAngle)
-      If Not String.IsNullOrWhiteSpace(sInfoSideAngle) Or Not String.IsNullOrEmpty(sInfoSideAngle) Then
-         ' verifico che il dato salvato sia un double
-         Try
-            Dim dSideAngle As Double = 0
-            StringToDouble(sInfoSideAngle, dSideAngle)
-            If dSideAngle <> 0 Then
-               Return True
-            End If
-         Catch ex As Exception
-         End Try
-      End If
-      Return False
+      Dim dSideAngle As Double
+      return EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, dSideAngle)
    End Function
 
    ' restituisce vero se il lato possiede delle info legate alle alette
    Private Function VerifyIsThereAlzFront(nCurrLine As Integer) As Boolean
-      Dim sInfoAlzFront As String = String.Empty
-      EgtGetInfo(nCurrLine, INFO_ALZFRONT, sInfoAlzFront)
-      If Not String.IsNullOrWhiteSpace(sInfoAlzFront) Or Not String.IsNullOrEmpty(sInfoAlzFront) Then
-         If sInfoAlzFront.Trim <> "0" Then
-            Return True
-         End If
-      End If
-      Return False
+      Dim nAlzFront As Integer
+      return EgtGetInfo(nCurrLine, INFO_ALZFRONT, nAlzFront) AndAlso nAlzFront <> 0
    End Function
 
    ' approvo la costruzione dell'aletta sul lato indicato

DrawImport/SideAngle.vb

@@ -159,7 +159,7 @@ Module SideAngle
       Return True
    End Function
 
-   Private Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
+   Friend Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
       ' Verifiche
       If LoopId = GDB_ID.NULL Or TextLayId = GDB_ID.NULL Then Return False
       ' Calcolo dimensione ingombro Loop

DrawImport/SideAngleUc.xaml.vb

@@ -755,6 +755,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If

Machine/AlarmsPageUC.xaml

@@ -809,6 +809,7 @@
                     <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
                 </Button>
 
+                
                 <TextBlock Name="UseLaserOriginTxBl" Grid.Column="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                 <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="2"

Machine/AlarmsPageUC.xaml.vb

@@ -119,6 +119,14 @@ Public Class AlarmsPageUC
          ' Variabile che accorcia il riferimento alla macchina corrente
          m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
+         ' in assenza dell'uscita H1 nascondo i parametri lama
+         If EgtGetHeadId("H1") = GDB_ID.NULL Then
+            SawGpBx.Visibility = Visibility.Hidden
+            TopMillGpBx.Visibility = Visibility.Hidden
+            CurrSawTxBl.Visibility = Visibility.Hidden
+            CurrSawCmBx.Visibility = Visibility.Hidden
+         End If
+
          ' Verifico la configurazione della macchina per creare i combobox
          Select Case m_CurrentMachine.MountedToolConfig
             Case CurrentMachine.MountedToolConfigs.SAW
@@ -133,7 +141,7 @@ Public Class AlarmsPageUC
                ' Disattivo il gruppo dei parametri fori
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
-               'Non faccio alcunchè
+            'Non faccio alcunchè
             Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
                'Da implementare
          End Select
@@ -152,7 +160,7 @@ Public Class AlarmsPageUC
 
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
-            WJsParamGpBx.Visibility = Visibility.Hidden
+            WjsParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -165,7 +173,7 @@ Public Class AlarmsPageUC
          End If
 
          ' Abilitazione Feed ridotta su inizio/fine tagli
-         If m_CurrentMachine.bFsevEnable Then
+         If m_CurrentMachine.bFsevEnable And EgtGetHeadId("H1") <> GDB_ID.NULL Then
             CutFredGpBx.Visibility = Windows.Visibility.Visible
          Else
             CutFredGpBx.Visibility = Windows.Visibility.Hidden
@@ -180,8 +188,8 @@ Public Class AlarmsPageUC
          m_bFirst = False
       End If
 
-      ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
-      CreateToolList(MCH_TF.SAWBLADE, m_SawList)
+         ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
+         CreateToolList(MCH_TF.SAWBLADE, m_SawList)
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
@@ -429,10 +437,24 @@ Public Class AlarmsPageUC
       End If
       If m_CurrentMachine.sCurrWaterJetting <> String.Empty Then
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
-         CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        5,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 2)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        10,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Collapsed
+         End If
       Else
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden

Machine/CurrentMachine.vb

@@ -77,6 +77,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Abilitazione DB WaterJet
+   Private m_bFromDBWaterJet As Boolean = False
+
    ' Flag per visualizzazione TcPos, Testa/uscita e Note utente
    Private m_nShowToolChanger As Integer = 0                 ' 0=no, 1=tutti utensili, 2=solo lame
    Private m_bShowHeadExit As Boolean = False
@@ -436,6 +439,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bFromDBWaterJet As Boolean
+      Get
+         Return m_bFromDBWaterJet
+      End Get
+   End Property
+
    Friend ReadOnly Property ShowToolChanger As Integer
       Get
          Return m_nShowToolChanger
@@ -1006,7 +1015,7 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         If bWaterJet Then
+         If bWaterJet And bFromDBWaterJet Then
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
          Else
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
@@ -1108,6 +1117,8 @@ Public Class CurrentMachine
       ' waterjet
       m_bWaterJet = (GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachIniFile) > 0) And
                     m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
+      ' Leggo abilitazione DB WaterJet
+      m_bFromDBWaterJet = (GetPrivateProfileInt(S_MATERIALS, K_FROMDBWATERJET, 0, sMachIniFile) > 0)
       ' Leggo abilitazione visualizzazione TcPos, Head/exit e Note utente
       m_nShowToolChanger = GetPrivateProfileInt(S_TOOLS, K_SHOWTOOLCHANGER, 0, sMachIniFile)
       m_bShowHeadExit = (GetPrivateProfileInt(S_TOOLS, K_SHOWHEADEXIT, 0, sMachIniFile) > 0)
@@ -1247,7 +1258,7 @@ Public Class CurrentMachine
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
 
-      If m_bWaterJet Then
+      If m_bWaterJet And m_bFromDBWaterJet Then
          LoadWJMaterial(True)
       Else
          While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
@@ -1262,7 +1273,7 @@ Public Class CurrentMachine
       ' Leggo materiale correntemente attivo
       Dim sCurrMatId As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
-      If bWaterJet Then
+      If bWaterJet And bFromDBWaterJet Then
          Dim sCurrMatIds As String()
          sCurrMatIds = sCurrMatId.Split("."c)
          If sCurrMatIds.Length > 1 Then

Machine/MachinePageUC.xaml.vb

@@ -64,7 +64,7 @@ Public Class MachinePageUC
          PolishingsBtn.IsEnabled = False
       End If
 
-      If Not m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Or Not m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          WaterJetBtn.IsEnabled = False
       End If
 

Machine/MachiningDbPageUC.xaml.vb

@@ -552,12 +552,15 @@ Public Class MachiningDbPageUC
       HeadSideCmBx.SelectedIndex = ToolInt - 1
       EgtMdbGetCurrMachiningParam(MCH_MP.LEADINTYPE, ToolInt)
       If LeadInTypeCmBx.Items.Count > 0 Then
-         LeadInTypeCmBx.SelectedItem =  LeadInTypeCmBx.Items(0)
+         LeadInTypeCmBx.SelectedItem = LeadInTypeCmBx.Items(0)
       Else
          LeadInTypeCmBx.SelectedItem = Nothing
       End If
       For Each LInType As IdNameStruct In LeadInTypeCmBx.Items
-         If ToolInt = LInType.Id Then LeadInTypeCmBx.SelectedItem = LInType
+         If ToolInt = LInType.Id Then
+            LeadInTypeCmBx.SelectedItem = LInType
+            Exit For
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.EXTLINKTYPE, ToolInt)
       ExtLinkTypeCmBx.SelectedIndex = ToolInt
@@ -705,7 +708,7 @@ Public Class MachiningDbPageUC
       ' Lista materiali
       m_MaterialsList.Clear()
       For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
          Else
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
@@ -720,7 +723,7 @@ Public Class MachiningDbPageUC
             Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
             Dim nSubParId As Integer = 0
-            If m_MainWindow.m_CurrentMachine.bWaterJet Then
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
                If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
                   StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
 
@@ -819,13 +822,13 @@ Public Class MachiningDbPageUC
       ' Parmetri nascosti di svuotatura
       If nMachiningType = MCH_MY.POCKETING Then
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
-         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         ' EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
          Dim dToolDiam As Double = 100
          If Not IsNothing(ToolCmBx.SelectedItem) Then
             EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
             EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
          End If
-         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam(MCH_MP.LITANG, 0.99 * dToolDiam)
          EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
       End If
       ' Parametri WaterJetting
@@ -894,7 +897,7 @@ Public Class MachiningDbPageUC
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
       For Each Material As MachiningMaterial In m_MaterialsList
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             If Material.bIsActive Then
                sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
             End If
@@ -1138,30 +1141,26 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
+               ' elimino eventuali righe in eccesso
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             ElseIf RowNum < 2 Then
                ' costruiso una riga in più da inserire
                Dim Row As New RowDefinition
                TypeGrd.RowDefinitions.Add(Row)
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -1779,7 +1778,7 @@ Public Class MachiningDbPageUC
             StepTypeTxBl.Visibility = Windows.Visibility.Hidden
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
-            SideBrd.Visibility = Windows.Visibility.Visible
+            SideBrd.Visibility = Windows.Visibility.Hidden
             WorkSideTxBl.Visibility = Windows.Visibility.Hidden
             WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
@@ -1791,15 +1790,22 @@ Public Class MachiningDbPageUC
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -2285,7 +2291,7 @@ Public Class MachiningDbPageUC
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
       Dim dMaxThick As Double = 0
-      If m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          ' solo per water jet controllo lo spessore massimo ammissibile
          dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
          Dim dVal As Double

MainWindow.xaml.vb

@@ -1139,7 +1139,8 @@ Class MainWindow
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
    End Sub
 
    ' Nomi dei file per OmagVIEW

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("EgalTech s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2021 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2022 by EgalTech s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.12.1")>
-<Assembly: AssemblyFileVersion("2.3.12.1")>
+<Assembly: AssemblyVersion("2.4.1.2")>
+<Assembly: AssemblyFileVersion("2.4.1.2")>

OmagCUTDictionary.xaml

@@ -1209,6 +1209,14 @@
         <Setter Property="Width" Value="80"/>
         <Setter Property="Keyboard" Value="Calculator"/>
         <Setter Property="KeyboardDimension" Value="300"/>
+        <Setter Property="IsHitTestVisible" Value="False" />
+        <Style.Triggers>
+            <DataTrigger Binding="{Binding IsSelected, RelativeSource={RelativeSource FindAncestor, 
+                                                                                      AncestorType={x:Type ListBoxItem}, AncestorLevel=1}}"
+                         Value="True">
+                <Setter Property="IsHitTestVisible" Value="True" />
+            </DataTrigger>
+        </Style.Triggers>
     </Style>
 
     <Style x:Key="OmagCut_MachToolCalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_CalculatorTextBox}">

Project/CurrentProjectPageUC.xaml.vb

@@ -622,6 +622,8 @@ Public Class CurrentProjectPageUC
                File.Copy(sPhoto, sNewPhoto, True)
             Catch ex As FileNotFoundException
                ' non è un problema
+            Catch ex As DirectoryNotFoundException
+               ' non è un problema
             Catch ex As Exception
                Return False
             End Try

RawPhoto/ChooseMachining.xaml.vb

@@ -60,6 +60,12 @@ Public Class ChooseMachining
 
    Private Sub InitializeMachiningLists()
 
+      ' in assenza dell'uscita H1 nascondo i parametri lama
+      If EgtGetHeadId("H1") = GDB_ID.NULL Then
+         CurrSawingTxBl.Visibility = Visibility.Hidden
+         CurrSawingCmBx.Visibility = Visibility.Hidden
+      End If
+
       ' -- TAGLIO --
       CreateMachiningList(MCH_MY.SAWING, m_CurrentMachine.sCurrSaw, m_SawingList)
       ' aggiungo un campo vuoto
@@ -257,7 +263,7 @@ Public Class ChooseMachining
          If SysNotes <> String.Empty Then
             Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
             SysNotes = String.Empty
-            If m_CurrentMachine.bWaterJet Then
+            If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
                For Each Material As Object In MachiningMaterials
                   Dim Param() As String = Material.Split(",".ToCharArray)
                   Dim SubParam() As String = Param(0).Split(".".ToCharArray)
@@ -583,18 +589,24 @@ Public Class ChooseMachining
             ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
             If CurrMillingCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJetting Then m_MachIsModified = True
          End If
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
-         End If
-         ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
-            If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
-         End If
-
-         CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
          CurrWJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWJettingCmBx.Visibility = Windows.Visibility.Visible
+         ' se DB WaterJet abilitato avrò anche la CmBx della Quality altrimenti espando la CmBx del Waterjetting corrente su tutta la riga
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 1)
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
+            End If
+            ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
+               If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
+            End If
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 3)
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Collapsed
+         End If
       End If
 
       Me.Height = 42 * m_RowNumber

RawPhoto/RawPartPageUC.xaml.vb

@@ -167,7 +167,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
       ' aggiorno la lista dei materiali
       Dim Index As Integer = 1
-      If m_CurrentMachine.bWaterJet Then
+      If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
          m_CurrentMachine.LoadWJMaterial()
       End If
 
@@ -964,13 +964,21 @@ Public Class RawPartPageUC
             m_nPtMode = If(AddBtn.IsChecked, PTMODE.ADD, PTMODE.MOVE)
          Case RAWMODE.FROM_LASER
             Dim ptAcquired As Point3d
-            '----------------------------------------- INIZIO ------------------ se decido di inserire i punti laser manualmente --------------------------------------------------
-            If m_bFromDraw And Not IsNothing(m_ptPrev) Then
-               ptAcquired = m_ptPrev
-               ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
-               '-----------------------------------------  FINE  ------------------- se decido di inserire i punti laser manualmente --------------------------------------------------
-            ElseIf Not AcquireLaserPoint(ptAcquired) Then
-               m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 32))
+            ' Se inserimento manuale dei punti laser
+            If m_bFromDraw Then
+               If Not IsNothing(m_ptPrev) Then
+                  ptAcquired = m_ptPrev
+                  ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+               Else
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+               ' altrimenti da macchina
+            Else
+               If Not AcquireLaserPoint(ptAcquired) Then
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
             End If
             ' Limito il punto a stare nella tavola con franco pari al kerf
             If ptAcquired.x < m_RawKerf Then ptAcquired.x = m_RawKerf + SAFE_RAW_DIST
@@ -1014,13 +1022,21 @@ Public Class RawPartPageUC
             m_nPtDmgMode = DMGMODE.NONE
          Case RAWMODE.DAMAGED_BY_LASER
             Dim ptAcquired As Point3d
-            '----------------------------------------- INIZIO ------------------ se decido di inserire i punti laser manualmente --------------------------------------------------
-            If m_bFromDraw And Not IsNothing(m_ptPrev) Then
-               ptAcquired = m_ptPrev
-               ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
-               '-----------------------------------------  FINE  ------------------- se decido di inserire i punti laser manualmente --------------------------------------------------
-            ElseIf Not AcquireLaserPoint(ptAcquired) Then
-               m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 32))
+            ' Se inserimento manuale dei punti laser
+            If m_bFromDraw Then
+               If Not IsNothing(m_ptPrev) Then
+                  ptAcquired = m_ptPrev
+                  ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
+               Else
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
+               ' altrimenti da macchina
+            Else
+               If Not AcquireLaserPoint(ptAcquired) Then
+                  m_CurrProjPage.SetErrorMessage(EgtMsg(90532))   ' Errore nell'acquisizione del punto
+                  Return
+               End If
             End If
             ' Limito il punto a stare nella tavola con franco pari al kerf
             If ptAcquired.x < m_RawKerf Then ptAcquired.x = m_RawKerf + SAFE_RAW_DIST
@@ -1062,8 +1078,11 @@ Public Class RawPartPageUC
       If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
          Return False
       End If
-      ' Ricavo dati lama corrente
-      Dim sSaw As String = m_CurrentMachine.sCurrSaw
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
       ' Imposto come testa corrente il laser (senza utensile ovviamente)
       If Not EgtSetCalcTool("", "H3", 1) Then
          Return False
@@ -1072,10 +1091,8 @@ Public Class RawPartPageUC
       If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTipP1) Then
          Return False
       End If
-      ' Ora imposto la lama corrente
-      If Not EgtSetCalcTool(sSaw, "H1", 1) Then
-         Return False
-      End If
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
       ' Porto il tip nell'origine tavola
       ptAcquired = ptTipP1
       ptAcquired.ToLoc(New Frame3d(m_ptTableMin))