Colcom L018:

- aggiunti bit x doppio pallet e cambiate machcine ingresso

IOB-WIN-NEXT/DATA/CONF/L018.ini

@@ -1,20 +1,19 @@
 ;Configurazione IOB-WIN
 [IOB]
-CNCTYPE=FANUC       
-PING_MS_TIMEOUT=500
+CNCTYPE=FANUC
 
 [MACHINE]
 VENDOR=COLCOM
-MODEL=TSUGAMI
+MODEL=DMG-MORI
 
 [CNC]
 ; TEST FANUC!
-IP=192.168.0.245
-PORT=8193 
+IP=192.168.100.78
+PORT=8193
 GETPRGNAME=true
-             
+
 [SERVER]
-MPIP=192.168.0.113
+MPIP=192.168.111.104
 MPURL=/MP/IO
 CMDBASE=/IOB/input/
 CMDFLOG=/IOB/flog/
@@ -22,15 +21,16 @@ CMDALIVE=/IOB
 CMDENABLED=/IOB/enabled/
 CMDADV1=?valore=
 CMDREBO=/sendReboot.aspx?idxMacchina=
-
-[MEMORY]   
-; Red: Y4.7 | Yellow: Y5.1 | Green Y5.0 | ALARM	Y 0.4 | Cycle CONT	Y 4.4
+     
+[MEMORY]        
+; Red: Y12.4 | Yellow: Y51.1 (porta chiusa, da NEGARE) | Green Y12.6 | Alarm	Y 51.4 | Blu Y12.7
 ;BIT0=CONN
-BIT1=Y5.0                
+BIT1=Y12.6
 BIT2=PZCOUNT.PAR.6711
-BIT3=Y4.7  
-BIT4=Y5.1
-BIT5=Y0.4
+BIT3=Y12.4  
+BIT4=Y12.7
+BIT5=Y18.3
+BIT6=Y11.3
 AREAD_START=0
 AREAD_SIZE=9999
 AREAG_SIZE=48
@@ -60,10 +60,15 @@ BLINK_FILT=0
 [OPTPAR]                   
 ;PZCOUNT_MODE=STD|BIT
 PZCOUNT_MODE=STD.PAR.6711
-;PZ_CAD_MADDR=1602; cad
-;PZ_REQ_MADDR=1603; pz richiesti (DW)
-;PZ_DONE_MADDR=1604; pz fatti
-;PZ_GTOT_MADDR=1605; pz tot macchina
+PZGTOT_MODE=STD.PAR.6712
+;PZREQ_MODE=STD.PAR.6713
+ENABLE_PZ_RESET=TRUE
+ENABLE_PZ_RESET_stopSetup=TRUE 
+;gestione invio pezzi in blocco
+ENABLE_SEND_PZC_BLOCK=TRUE
+MIN_SEND_PZC_BLOCK=0
+MAX_SEND_PZC_BLOCK=100  
 
-[BRANCH]
+
+[BRANCH]    
 NAME=master