- Allineamento con common ver. 2.6d2

- Aggiunta variabile MaxZ1Blade e relativa gestione
- Aggiunto solido collisione in NGE

.gitlab-ci.yml

@@ -0,0 +1,236 @@
+variables:
+ VERS_MAIN: '1.0'
+ MACH_NAME: ''
+ MACH_NAME_TEST: ''
+ NEW_REL: ''
+ NET_SHARE_X: '\\10.74.82.201\EgwTech'
+ NET_SHARE_Z: '\\10.74.82.201\Artifacts'
+ NET_SHARE_S: '\\10.74.82.201\Scambio'
+ NET_SHARE_R: '\\10.74.82.201\EgwTech'
+ NET_USERQ: 'steamw\egalware'
+ MACH_VERS: '0.0.0.0'
+ TEMP_PATH: 'C:\MachinesDeploy'
+ MACHINES_PATH_R: 'R:\EgtData\Machines'
+ DEST_MACHINES_PATH_R: 'R:\EgtData\Machines\zTestYAML'
+ SRC_PATH: ''
+ BASE_PATH: ''
+ TEST_PATH: ''
+
+#Note compilazione LUA:
+# lua54 -o bin\$FileName -s $FileName: -o = output, -s = NON include i debug symbols
+
+# helper copia script verso cartella di rete S:\ delle cartelle bin
+.ReplicaS: &ReplicaS
+   - |
+      net use S: /delete
+      SLEEP 2
+      net use S: $env:NET_SHARE_S /u:$env:NET_USERQ $SDRIVE_PASSWD
+      ROBOCOPY /MIR $env:BASE_PATH S:\LucaM\MachinesDeploy\$env:MACH_NAME\$env:MACH_VERS\ /XD "bin" /XD "$env:MACH_NAME_TEST"
+      SLEEP 2
+      net use S: /delete
+
+# helper copia script verso cartella di rete R:\
+.ReplicaR: &ReplicaR
+   - |
+      net use R: /delete
+      SLEEP 2
+      net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
+      echo "-----------------------"
+      echo "   Copia macchina su R"
+      echo "-----------------------"
+      ROBOCOPY /MIR "$env:SRC_PATH" "$env:DEST_MACHINES_PATH_R\$env:MACH_NAME\" /XD "bin"
+      ROBOCOPY "$env:TEST_PATH" "$env:DEST_MACHINES_PATH_R\$env:MACH_NAME_TEST\" /E /XD "bin"
+      ROBOCOPY /MIR "$env:BASE_PATH" "$env:DEST_MACHINES_PATH_R\Deploy\$env:MACH_NAME\$env:MACH_VERS\" /XD "bin" /XD "$env:MACH_NAME_TEST"
+      SLEEP 2
+      net use R: /delete
+
+# helper copia script verso cartella di rete R:\ per develop
+.ReplicaR_DEV: &ReplicaR_DEV
+   - |
+      net use R: /delete
+      SLEEP 2
+      net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
+      echo "-----------------------"
+      echo "   Copia macchina su R - DEV"
+      echo "-----------------------"
+      ROBOCOPY /MIR "$env:BASE_PATH" "$env:DEST_MACHINES_PATH_R\Deploy\$env:MACH_NAME\_DEV\$env:MACH_VERS\" /XD "bin" /XD "$env:MACH_NAME_TEST"
+      SLEEP 2
+      net use R: /delete
+
+#helper copia sorgenti da R a percorso temporaneo
+.CreateBaseFolder: &CreateBaseFolder
+   - |   
+      net use R: /delete
+      SLEEP 2
+      net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
+      echo "-----------------------"
+      echo "   Recupero file non git da R e copia su macchina virtuale"
+      echo "-----------------------"
+      ROBOCOPY "$env:LAST_MACHINE_PATH" "$env:SRC_PATH" /E /XF "*.bat" /XF "*.yml" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt" /XD ".vscode"
+      ROBOCOPY "$env:LAST_MACHINE_PATH" "$env:SRC_PATH\bin\$env:MACH_NAME\" /E /XF "*.bat" /XF "*.yml" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt" /XD ".vscode"
+      SLEEP 2
+      net use R: /delete
+
+# helper compilazione LUA a 32 e 64 bit
+.LuaCompile: &LuaCompile
+  - |
+     Set-Alias lua54  C:\Tools\Lua32\luac54
+     echo "-----------------------"
+     echo "   Copia file su macchina virtuale"
+     echo "-----------------------"
+     ROBOCOPY . "$env:SRC_PATH" /E /XF "*.bat" /XF "*.yml" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt" /XD ".vscode"
+     ROBOCOPY . "$env:TEST_PATH" /E /XF "*.bat" /XF "*.yml" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt" /XD ".vscode"
+     Rename-Item -Path "$env:TEST_PATH\$env:MACH_NAME.mlde" -NewName "$env:MACH_NAME_TEST.mlde"
+     Rename-Item -Path "$env:TEST_PATH\$env:MACH_NAME.ini" -NewName "$env:MACH_NAME_TEST.ini"
+     ROBOCOPY . "$env:SRC_PATH\bin\$env:MACH_NAME\" /E /XF "*.bat" /XF "*.yml" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt" /XD ".vscode"
+     echo "-----------------------"
+     echo "   Compilazione file *.lua 32/64bit"
+     echo "-----------------------"
+     $FileList = Get-ChildItem("Common-*")
+     ForEach ($File in $FileList) {
+       $FileName = Split-Path $File -leaf
+       lua54 -o $env:SRC_PATH\bin\$env:MACH_NAME\$FileName -s $FileName
+       echo "lua54 -o bin\$FileName -s $FileName"
+     }
+
+# helper recupero nome macchina
+.machName-fix: &machName-fix
+   - |
+      echo "-----------------------"
+      echo "   Recupero nome macchina"
+      echo "-----------------------"
+      $fileName = dir *.mlde
+      $env:MACH_NAME = $fileName.BaseName
+      $env:MACH_NAME_TEST = $env:MACH_NAME + ".TEST"
+
+# helper calcolo versione
+.version-fix: &version-fix
+   - |
+      echo "-----------------------"
+      echo "   Calcolo versione"
+      echo "-----------------------"
+      $fPath = "$env:MACH_NAME.mlde";
+      $vLine = Select-String -path $fPath -Pattern 'PP_VER';
+      $comp = $vLine -split "=";
+      $env:MACH_VERS = $comp[1].Replace("'","").Trim()
+      # display versione
+      Write-Output $env:MACH_VERS;
+
+# helper calcolo versione se develop
+.version-fix_DEV: &version-fix_DEV
+   - |
+      echo "-----------------------"
+      echo "   Calcolo versione - DEV"
+      echo "-----------------------"
+      $commitAuthor = $CI_COMMIT_AUTHOR -split " "
+      $commitAuthor = $commitAuthor[0].Trim()
+      $env:MACH_VERS = $commitAuthor
+      # display versione
+      Write-Output $env:MACH_VERS;
+
+# helper creazione folders 
+.folder-fix: &folder-fix
+   - |
+      echo "-----------------------"
+      echo "   Creazione cartelle su macchina virtuale"
+      echo "-----------------------"
+      $env:LAST_MACHINE_PATH = "$env:MACHINES_PATH_R\$env:MACH_NAME";
+      Write-Output  $env:LAST_MACHINE_PATH;
+      $env:SRC_PATH = "$env:TEMP_PATH\$env:MACH_NAME\$env:MACH_VERS\$env:MACH_NAME";
+      $env:BASE_PATH = "$env:TEMP_PATH\$env:MACH_NAME\$env:MACH_VERS";
+      $env:TEST_PATH = "$env:TEMP_PATH\$env:MACH_NAME\$env:MACH_VERS\$env:MACH_NAME_TEST";
+      Write-Output  $env:BASE_PATH;     
+      if (Test-Path $env:BASE_PATH) { Remove-Item -Path "$env:BASE_PATH\*" -R -Force };
+      Write-Output  $env:TEST_PATH;
+
+# helper compressione e pulizia folders 
+.ZipClean: &ZipClean
+   - |
+      "  Compressione file su macchina virtuale"
+      $7zipPath = $env:ProgramFiles+"\7-Zip\7z.exe";
+      if (-not (Test-Path -Path $7zipPath -PathType Leaf)) {
+          throw "7 zip file '$7zipPath' not found"
+      }
+      Set-Alias 7zip $7zipPath
+      $Target = "$env:BASE_PATH\$env:MACH_NAME.zip"
+      cd "$env:SRC_PATH\bin\"
+      $Source = "*"
+      7zip a -tzip $Target $Source  
+      Write-Output "called ZIP $Source --> $Target"
+
+
+# helper esecuzione test 
+.RunTest: &RunTest
+   - |
+      Write-Output "Test done!"      
+
+
+stages:
+ - build
+#  - test
+#  - deploy
+
+LuaCompile:build:
+ stage: build
+ only:
+   - main
+   - master
+ tags:
+   - win
+ before_script:
+   - *machName-fix
+   - *version-fix
+   - *folder-fix
+ script:
+   - *CreateBaseFolder    
+   - *LuaCompile
+   - *ZipClean
+   - *ReplicaR
+
+LuaCompileDev:build:
+ stage: build
+ only:
+   - develop
+ tags:
+   - win
+ before_script:
+   - *machName-fix
+   - *version-fix_DEV
+   - *folder-fix
+ script:
+   - *CreateBaseFolder    
+   - *LuaCompile
+   - *ZipClean
+   - *ReplicaR_DEV
+
+# LuaCompile:test:
+#  stage: test
+#  needs: ["LuaCompile:build"]
+#  only:
+#    - main
+#    - master
+#    - develop
+#  tags:
+#    - win
+#  before_script:
+#    - *version-fix
+#    - *folder-fix
+#  script:    
+#    - *LuaCompile
+#    - *RunTest
+   
+# LuaCompile:deploy:
+#  stage: deploy
+#  needs: ["LuaCompile:test"]
+#  only:
+#    - main
+#    - master
+#  tags:
+#    - win
+#  before_script:
+#    - *version-fix
+#    - *folder-fix
+#  script:    
+#    - *LuaCompile
+#    - *ZipClean
+#    - *ReplicaR

Beam/MachiningTypes.ini

@@ -10,6 +10,8 @@
 2=Drill_H2
 3=Pocket
 4=Pocket_H2
+5=Predrill
+6=Predrill_H2
 
 [Milling]
 1=Prof

Common-PF1250.TPA.mlpe

@@ -40,14 +40,17 @@ end
 
 ---------------------------------------------------------------------
 function OnProgramStart()
+   -- aggiungo prefisso per commentae commenti iniziali se la macchina è utilizzata per fare i test
+   local sPrefixCommentLine = '' ; if IS_TEST_MACHINE or EgtEndsWith( EgtGetCurrMachineDir(), '.TEST') then sPrefixCommentLine = '//' end
+
    -- Intestazioni
    if EMT.INFO then
-      MyOutput( '('..EMT.INFO..')')
+      MyOutput( sPrefixCommentLine..'('..EMT.INFO..')')
    else
       MyOutput( '(Program Start)')
    end
-   MyOutput( '('.. CSP_INFO..')')
-   MyOutput( '('.. MACHINE_INFO..')')
+   MyOutput( sPrefixCommentLine..'('.. CSP_INFO..')')
+   MyOutput( sPrefixCommentLine..'('.. MACHINE_INFO..')')
 
    -- Se modalità test, aggiungo linee per muovere tappeto e alzare la testa (in automatico viene fatto dal main residente)
    if TEST_USE then
@@ -704,7 +707,12 @@ function OnRapid()
          -- se testa 1
          if nHSet == 1 then
             -- selezione testa (posso muovere X solo a Zmax)
-            local MaxZ1 = EgtGetAxisMax( 'Z1')
+            local MyMaxZ1 = EgtGetAxisMax( 'Z1')
+            -- in caso di rotazione della lama lontano dalla posizione di home degli assi rotanti
+            local bXSpec = EgtIf( BD.RIGHT_LOAD, ( EMT.L2 > -DeltaTabY), ( EMT.L2 < -DeltaTabY))
+            EmitMoveDataHead( 1, { X=EgtIf( bXSpec, -DeltaTabY, EMT.L2), Z=MyMaxZ1, S=Speed})
+            EmitMoveStartHead( 1)
+            EmitMoveWaitHead( 1)
             EmitMoveWaitChars( EgtIf( bOnlyCharY, 1, 3))
             -- se necessario allargo le cabine
             if RollerParkingNeeded( EMT.HEAD, PrevR1, PrevR2, EMT.R1, EMT.R2) or
@@ -712,14 +720,12 @@ function OnRapid()
                local dPosT = EMT.TPOS or EMT.L1op
                EmitParkRoller( dPosT, bSplitCut)
             end
-            -- in caso di rotazione della lama lontano dalla posizione di home degli assi rotanti
-            local bXSpec = EgtIf( BD.RIGHT_LOAD, ( EMT.L2 > -DeltaTabY), ( EMT.L2 < -DeltaTabY))
             if ( EMT.HEAD == 'H12' or EMT.HEAD == 'H16') and ( abs( PrevR1 - EMT.R1) > 1 or abs( PrevR2 - EMT.R2) > 1) and ( abs( HomeR1 - EMT.R1) > 30.1 or abs( HomeR2 - EMT.R2) > 30.1) then
                -- se bisogna scrivere tutti gli assi
                if WriteAllCoordsOnFirstM101 then
-                  EmitMoveDataHead( 1, { X=EgtIf( bXSpec, -DeltaTabY, EMT.L2), Z=MaxZ1, B=ParkB1, C=ParkC1, S=Speed})
+                  EmitMoveDataHead( 1, { X=EgtIf( bXSpec, -DeltaTabY, EMT.L2), Z=MyMaxZ1, B=ParkB1, C=ParkC1, S=Speed})
                else
-                  EmitMoveDataHead( 1, { X=EgtIf( bXSpec, -DeltaTabY, EMT.L2), Z=MaxZ1, S=Speed})
+                  EmitMoveDataHead( 1, { X=EgtIf( bXSpec, -DeltaTabY, EMT.L2), Z=MyMaxZ1, S=Speed})
                end
                EmitMoveDataHead( 1, { B=0, S=Speed})
                EmitMoveDataHead( 1, { C=EMT.R1, S=Speed})
@@ -1063,6 +1069,7 @@ function OnRapid()
             local CurrC2 = PrevR1
             local dSafeZ2 = EgtGetAxisHomePos( 'Z2')
             local Speed = EMT.S * EgtIf( EMT.HEAD ~= 'H22', 1, 1.65)
+            if not EMT.L2p then EMT.L2p = EgtGetAxisHomePos( 'X2') end
             -- calcolo posizione reale
             EMT.TCPOSREAL = 'T' .. AdjustTcPos( false, EMT.TCPOS, EMT.R3)
             -- se utensile cambiato (controllo il reale perchè per aggregato dipende come è stato caricato)
@@ -1076,19 +1083,22 @@ function OnRapid()
                         EmitMoveDataHead( 2, { X=SafeX2, Z=-CurrZ2, B=CurrB2, C=CurrC2, S=Speed})
                      end
                   end
+                  -- scrivo solo se gli assi rotanti sono cambiati
                   EmitMoveDataHead( 2, { Z=-dSafeZ2, S=Speed})
-                  EmitMoveDataHead( 2, { X=EMT.L2, S=Speed})
+                  if EMT.L2p > ParkMchY2 and ( CurrB2 ~= EMT.R2  or  CurrC2 ~= EMT.R1) then
+                     EmitMoveDataHead( 2, { X=ParkMchY2, Z=-dSafeZ2, B=CurrB2, C=CurrC2, S=Speed}) 
+                  end
                else
                   -- scrivo solo se gli assi rotanti sono cambiati
-                  if EMT.HEAD == 'H22' and ( CurrB2 ~= EMT.R2  or  CurrC2 ~= EMT.R1) then
-                     EmitMoveDataHead( 2, { X=EMT.L2, Z=-dSafeZ2, B=CurrB2, C=CurrC2, S=Speed}) 
+                  if EMT.L2p > ParkMchY2 and ( CurrB2 ~= EMT.R2  or  CurrC2 ~= EMT.R1) then
+                     EmitMoveDataHead( 2, { X=ParkMchY2, Z=-dSafeZ2, B=CurrB2, C=CurrC2, S=Speed}) 
                   end
                end
             -- se stesso utensile vado già alla X di lavoro
             else
                -- scrivo solo se gli assi rotanti sono cambiati
-               if EMT.HEAD == 'H22' and ( CurrB2 ~= EMT.R2  or  CurrC2 ~= EMT.R1) then
-                  EmitMoveDataHead( 2, { X=EMT.L2, Z=-dSafeZ2, B=CurrB2, C=CurrC2, S=Speed}) 
+               if EMT.L2p > ParkMchY2 and ( CurrB2 ~= EMT.R2  or  CurrC2 ~= EMT.R1) then
+                  EmitMoveDataHead( 2, { X=ParkMchY2, Z=-dSafeZ2, B=CurrB2, C=CurrC2, S=Speed}) 
                end
             end
             -- scrivo solo se gli assi rotanti sono cambiati

Common-PF1250.mlpe

@@ -120,6 +120,7 @@ function OnSimulStart()
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'COL1'},
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'COL2'},
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'CHSAW'},
+                     { Grp = 'Base', Sub = 'COLLISION', Name = 'CEIL'},
                      { Grp = 'Z2', Sub = 'COLLISION', Name = 'COL1'},
                      { Grp = 'Z2', Sub = 'COLLISION', Name = 'CHAIN'},
                      { Grp = 'Z2', Sub = 'COLLISION', Name = 'COL2'},
@@ -455,6 +456,9 @@ function OnSimulToolSelect( dPosA)
       if EgtGetHeadId( 'H31') then
          EgtSetAxisPos( 'X3', ParkX3)
       end
+      if EMT.HEAD == 'H12' then
+         EgtSetAxisPos( 'Z1', MaxZ1Blade)
+      end
       EgtResetAxisPos( 'C1')
       EgtResetAxisPos( 'B1')
    -- se testa 3 parcheggio la 1
@@ -520,10 +524,14 @@ function OnSimulToolDeselect( dPrevA)
    if ( EMT.NEXTTOOL == EMT.PREVTOOL_H1 or EMT.NEXTTOOL == EMT.PREVTOOL_H2) and EMT.NEXTHEAD ~= 'H13' and ( EMT.NEXTHEAD ~= 'H22' or not dPrevA) then return end
    -- deposito utensile
    EgtOutText( 'Tool change in progress...')
-   -- recupero il gruppo
-   local nSetHead = GetHeadSet( EMT.NEXTHEAD)
+   -- recupero il gruppo attuale e il successivo
+   local nNextSetHead = GetHeadSet( EMT.NEXTHEAD)
+   local nSetHead = GetHeadSet( EMT.HEAD)
+   -- se devo deselezionare testa 3, la mando a parcheggio
+   if nSetHead == 3 then
+      SimulMoveAxis( 'X3', ParkX3, MCH_SIM_STEP.RAPID)
    -- per testa gruppo 2 
-   if nSetHead == 2 and EMT.PREVTCPOS_H2 then
+   elseif nNextSetHead == 2 and EMT.PREVTCPOS_H2 then
       -- deposito lama su aggregato testa sotto
       if EMT.PREVHEAD_H2 == 'H22' then
          -- simulo movimento
@@ -542,7 +550,7 @@ function OnSimulToolDeselect( dPrevA)
       -- nascondo l'utensile sulla testa
       EgtSetStatus( EgtGetHeadId( EMT.PREVHEAD_H2 or '') or GDB_ID.NULL, GDB_ST.OFF)
    -- se testa gruppo 1
-   elseif nSetHead == 1 and EMT.PREVTCPOS_H1 then
+   elseif nNextSetHead == 1 and EMT.PREVTCPOS_H1 then
       -- deposito utensile fresa
       if EMT.PREVHEAD_H1 == 'H11' then
          -- simulo movimento
@@ -599,8 +607,6 @@ function OnSimulToolDeselect( dPrevA)
          EgtSetMode( EgtGetHeadId( EMT.PREVHEAD_H1 or '') or GDB_ID.NULL, GDB_MD.HIDDEN)
       end
       SimulMoveAxis( 'X1', ParkX1, MCH_SIM_STEP.RAPID)
-   elseif nNextSetHead == 1 then
-      SimulMoveAxis( 'X3', ParkX3, MCH_SIM_STEP.RAPID)
    end
    -- movimento per prendere nuovo utensile
    -- prendo utensile fresa
@@ -901,6 +907,7 @@ function OnSimulMoveStart()
          local C1Home = EgtGetAxisHomePos( 'C1')
          local Z1Pos = EgtGetAxisPos( 'Z1')
          local Z1Home = EgtGetAxisHomePos( 'Z1')
+         local MyMaxZ1 = EgtGetAxisMax( 'Z1')
          -- se fresa o lama
          if EMT.HEAD ~= 'H13' then
             -- se movimento iniziale da Zmax con lama o fresa
@@ -909,7 +916,7 @@ function OnSimulMoveStart()
                -- in caso di rotazione della lama lontano dalla posizione di home degli assi rotanti
                if ( EMT.HEAD == 'H12' or EMT.HEAD == 'H16') and ( abs( C1Pos - EMT.R1) > 1 or abs( B1Pos - EMT.R2) > 1) and ( abs( C1Home - EMT.R1) > 30.1 or abs( B1Home - EMT.R2) > 30.1) then
                   SimulMoveAxis( 'X1', EgtIf( bXSpec, DeltaTabY, EMT.L2), MCH_SIM_STEP.RAPID)
-                  SimulMoveAxes( 'Z1', MaxZ1, MCH_SIM_STEP.RAPID, 'B1', 0, MCH_SIM_STEP.COLLROT)
+                  SimulMoveAxes( 'Z1', MyMaxZ1, MCH_SIM_STEP.RAPID, 'B1', 0, MCH_SIM_STEP.COLLROT)
                   SimulMoveAxis( 'C1', EMT.R1, MCH_SIM_STEP.COLLROT)
                   SimulMoveAxis( 'X1', EMT.L2, MCH_SIM_STEP.RAPID)
                   SimulMoveAxes( 'Z1', EMT.L3, MCH_SIM_STEP.RAPID, 'B1', EMT.R2, MCH_SIM_STEP.COLLROT)
@@ -947,6 +954,9 @@ function OnSimulMoveStart()
          local C2Home = EgtGetAxisHomePos( 'C2')
          local Z2Home = EgtGetAxisHomePos( 'Z2')
          local X2Home = EgtGetAxisHomePos( 'X2')
+         local X2Pos = EgtGetAxisPos( 'X2')
+         local B2Pos = EgtGetAxisPos( 'B2')
+         local C2Pos = EgtGetAxisPos( 'C2')
          if EMT.TOOL ~= EMT.PREVTOOL_H2 then
             if EMT.ZMAX then
                -- se bisogna scrivere tutti gli assi
@@ -958,15 +968,20 @@ function OnSimulMoveStart()
                   end
                end
                SimulMoveAxis( 'Z2', Z2Home, MCH_SIM_STEP.RAPID)
-               SimulMoveAxis( 'X2', EMT.L2, MCH_SIM_STEP.RAPID)
+               -- Porto la X alla giusta quota
+               if X2Pos > ParkMchY2 and ( B2Pos ~= EMT.R2  or  C2Pos ~= EMT.R1) then
+                  SimulMoveAxis( 'X2', ParkMchY2, MCH_SIM_STEP.RAPID)
+               end
             else
-               if EMT.HEAD == 'H22' then
-                  SimulMoveAxis( 'X2', EMT.L2, MCH_SIM_STEP.RAPID)
+               -- Porto la X alla giusta quota
+               if X2Pos > ParkMchY2 and ( B2Pos ~= EMT.R2  or  C2Pos ~= EMT.R1) then
+                  SimulMoveAxis( 'X2', ParkMchY2, MCH_SIM_STEP.RAPID)
                end
             end
          else
-            if EMT.HEAD == 'H22' then
-               SimulMoveAxis( 'X2', EMT.L2, MCH_SIM_STEP.RAPID)
+            -- Porto la X alla giusta quota
+            if X2Pos > ParkMchY2 and ( B2Pos ~= EMT.R2  or  C2Pos ~= EMT.R1) then
+               SimulMoveAxis( 'X2', ParkMchY2, MCH_SIM_STEP.RAPID)
             end
          end
          if EMT.HEAD == 'H22' then
@@ -1022,7 +1037,7 @@ function OnSimulMoveStart()
                EmtSetLastError( 1208, sErr)
             end
             -- se appena sopra inizio, sistemo subito la quota in Z
-            if EMT.MOVE == 0 and EMT.FLAG == 1 then
+            if EMT.MOVE == 0 then
                SimulMoveAxes( 'Z2', EMT.A6, MCH_SIM_STEP.RAPID)
             end
          end
@@ -1350,13 +1365,14 @@ function ExecMoveZmax( bMchSplit)
    end
    -- se testa sopra
    if nSetHead == 1 then
+      local MyMaxZ1 = EgtGetAxisMax( 'Z1')
       -- se fresa o lama
       if EMT.HEAD ~= 'H13' then
          if abs( HomeC - CurrC) > 0.1 or abs( HomeB - CurrB) > 0.1 then
             local dZref = HomeZ + GetZExtra( EMT.HEAD, CurrB)
             SimulMoveAxes( 'Z1', EgtIf( dZref > CurrZ, dZref, CurrZ), MCH_SIM_STEP.RAPID, 'B1', EgtClamp( CurrB, -90, 90), MCH_SIM_STEP.COLLROT)
             if ( EMT.HEAD == 'H12' or EMT.HEAD == 'H16') and ( abs( HomeC - CurrC) > 30.1 or abs( HomeB - CurrB) > 30.1) then
-               SimulMoveAxes( 'Z1', MaxZ1, MCH_SIM_STEP.RAPID, 'B1', 0, MCH_SIM_STEP.COLLROT)
+               SimulMoveAxes( 'Z1', MyMaxZ1, MCH_SIM_STEP.RAPID, 'B1', 0, MCH_SIM_STEP.COLLROT)
             end
             if  ( not BD.RIGHT_LOAD and EMT.L2 > DeltaTabY) or ( BD.RIGHT_LOAD and EMT.L2 < DeltaTabY) then
                SimulMoveAxis( 'X1', DeltaTabY, MCH_SIM_STEP.RAPID)
@@ -1364,7 +1380,7 @@ function ExecMoveZmax( bMchSplit)
             SimulMoveAxis( 'C1', HomeC, MCH_SIM_STEP.COLLROT)
             SimulMoveAxis( 'B1', HomeB, MCH_SIM_STEP.COLLROT)
          end
-         SimulMoveAxis( 'Z1', MaxZ1, MCH_SIM_STEP.RAPID)
+         SimulMoveAxis( 'Z1', MyMaxZ1, MCH_SIM_STEP.RAPID)
       -- altrimenti sega a catena
       else
          -- salgo in Z sicurezza raddrizzando la B

Common-PF1250.mlse

@@ -71,14 +71,14 @@ function OnSpecialGetMaxZ()
    elseif EMC.HEAD == 'H12' then
       if vtTp:getX() > 0.3 and vtT:getX() > 0.3 then
          if bBSameSign and abs( EMC.R1 - EMC.R1p) < 165 then
-            EMC.MAXZ = MaxZ1 - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
+            EMC.MAXZ = MaxZ1Blade - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
          elseif vtTp:getZ() > 0.707 or vtT:getZ() > 0.707 then
             EMC.MAXZ = ParkZ1 + 200
          else
             EMC.MAXZ = ParkZ1 + 1
          end
       elseif bBSameSign and EMC.R1p > 29.9 and EMC.R1p < 180.1 and EMC.R1 > 29.9 and EMC.R1 < 180.1 and EMC.R2p > -10 and EMC.R2 > -10 then
-         EMC.MAXZ = MaxZ1 - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
+         EMC.MAXZ = MaxZ1Blade - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
       elseif bBSameSign and EMC.R1p > -0.1 and EMC.R1p < 180.1 and EMC.R1 > -0.1 and EMC.R1 < 180.1 and EMC.R2p > -10 and EMC.R2 > -10 then
          local vMZ = {{ Tz=0.85, Ez=440}, { Tz=0.5, Ez=200}, { Tz=-0.01, Ez=5}, { Tz=-0.5, Ez=1}}
          EMC.MAXZ = ParkZ1 + CalcExtraZ( vtTpZm, vtT, vMZ)
@@ -89,14 +89,14 @@ function OnSpecialGetMaxZ()
    elseif EMC.HEAD == 'H16' then
       if vtTp:getX() > 0.3 and vtT:getX() > 0.3 then
          if bBSameSign and abs( EMC.R1 - EMC.R1p) < 165 then
-            EMC.MAXZ = MaxZ1 - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
+            EMC.MAXZ = MaxZ1Blade - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
          elseif vtTp:getZ() > 0.707 or vtT:getZ() > 0.707 then
             EMC.MAXZ = ParkZ1 + 200
          else
             EMC.MAXZ = ParkZ1 + 1
          end
       elseif bBSameSign and EMC.R1p > 29.9 and EMC.R1p < 180.1 and EMC.R1 > 29.9 and EMC.R1 < 180.1 and EMC.R2p > -10 and EMC.R2 > -10 then
-         EMC.MAXZ = MaxZ1 - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
+         EMC.MAXZ = MaxZ1Blade - EgtIf( abs( EMC.R2) < 90.1 and abs( EMC.R2p) < 90.1, 0, 130)
       elseif bBSameSign and EMC.R1p > -0.1 and EMC.R1p < 180.1 and EMC.R1 > -0.1 and EMC.R1 < 180.1 and EMC.R2p > -10 and EMC.R2 > -10 then
          local vMZ = {{ Tz=0.85, Ez=440}, { Tz=0.5, Ez=200}, { Tz=-0.01, Ez=5}, { Tz=-0.5, Ez=1}}
          EMC.MAXZ = ParkZ1 + CalcExtraZ( vtTpZm, vtT, vMZ)

Essetre-PF1250.mlde

@@ -54,12 +54,16 @@
 --                      Aggiunto variabile 'ParkLongB1' posizione parcheggio per punte lunghe
 -- 2024/04/12 ver 2.6d1 Allineamento con common ver. 2.6d1
 --                      Aggiunto parametro ForceToCloseRollersGate
+-- 2024/04/23 ver 2.6d2 Allineamento con common ver. 2.6d2
+--                      Aggiunta variabile MaxZ1Blade e relativa gestione
+--                      Aggiunto solido collisione in NGE
+
 
 -- Intestazioni
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.6d1'
+PP_VER = '2.6d2'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-PF1250'
 
@@ -125,6 +129,7 @@ MinX1 = 0
 MaxX1 = 3300
 MinZ1 = -1550
 MaxZ1 = -100
+MaxZ1Blade = -100
 MinC1 = -275
 MaxC1 = 275
 MinB1 = -127
@@ -212,6 +217,7 @@ if EgtExistsFile( sDataBeam) then
          if Machine.Offsets.PARK_X1 then ParkX1 = Machine.Offsets.PARK_X1 end
          if Machine.Offsets.Z1_NEG then MinZ1 = Machine.Offsets.Z1_NEG end
          if Machine.Offsets.Z1_POS then MaxZ1 = min( MaxZ1, Machine.Offsets.Z1_POS) end
+         if Machine.Offsets.Z1_POS_LAMA then MaxZ1Blade = min( MaxZ1Blade, Machine.Offsets.Z1_POS_LAMA) end
          if Machine.Offsets.PARK_Z1 then ParkZ1 = Machine.Offsets.PARK_Z1 end
          if Machine.Offsets.C1_NEG then MinC1 = Machine.Offsets.C1_NEG end
          if Machine.Offsets.C1_POS then MaxC1 = Machine.Offsets.C1_POS end
@@ -275,6 +281,7 @@ if EgtExistsFile( sDataBeam) then
          ParkV2 = MinV2
          ParkY2 = ParkV2 - MinDeltaYV
          UnloadSmT = UnloadT - 300
+         MaxZ1Blade = min( MaxZ1Blade, MaxZ1)
          Head2Y = DeltaTabY - Delta2TabY
          Head2Z = DeltaTabZ - Delta2TabZ
          ParkCSawZ1 = min( ParkCSawZ1, MaxZ1)
@@ -826,6 +833,8 @@ EgtMove( EgtGetFirstNameInGroup( V2Id, 'SOLID'), vtMove, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( V2Id, 'COLLISION'), vtMove, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( PV2Id, 'SOLID'), vtMove, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( QV2Id, 'SOLID'), vtMove, GDB_RT.GLOB)
+local vtMoveColl = Vector3d( 0, 0, MaxZ1Blade)
+EgtMove( EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( BaseId, 'COLLISION'), 'CEIL'), vtMoveColl, GDB_RT.GLOB)
 
 -- Assegno identificativi alle spie delle morse
 PY1LightId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( Y1Id, 'SOLID') or GDB_ID.NULL, 'Light')
@@ -846,6 +855,7 @@ function OnSetHead()
       else
          EmtModifyAxisHome( 'X1', ParkTc2X1)
       end
+      EmtModifyAxisStroke( 'Z1', {MinZ1, MaxZ1})
       if EMC.TOTLEN < LongTool then
          EmtModifyAxisHome( 'Z1', ParkZ1)
          EmtModifyAxisStroke( 'C1', {MinC1, MaxC1})
@@ -867,6 +877,7 @@ function OnSetHead()
    elseif EMC.HEAD == 'H12' then
       EmtModifyAxisHome( 'X1', ParkX1)
       EmtModifyAxisHome( 'Z1', ParkZ1)
+      EmtModifyAxisStroke( 'Z1', {MinZ1, MaxZ1Blade})
       EmtModifyAxisStroke( 'C1', {MinC1, MaxC1})
       EmtModifyAxisHome( 'C1', ParkC1)
       EmtModifyAxisHome( 'B1', ParkB1)
@@ -892,6 +903,7 @@ function OnSetHead()
    elseif EMC.HEAD == 'H16' then
       EmtModifyAxisHome( 'X1', ParkTc2X1)
       EmtModifyAxisHome( 'Z1', ParkZ1)
+      EmtModifyAxisStroke( 'Z1', {MinZ1, MaxZ1Blade})
       EmtModifyAxisStroke( 'C1', {MinC1, MaxC1})
       EmtModifyAxisHome( 'C1', ParkC1)
       EmtModifyAxisHome( 'B1', ParkB1)

UpdateLog.txt

@@ -1,5 +1,15 @@
            ==== Common_PF1250 Update Log ====
 
+Versione 2.6d2 (23/04/2024)
+- (MLDE-GEN) Aggiunto parametro 'IS_TEST_MACHINE' FACOLTATIVO. Se non esiste o 'false' è macchina standard, se 'true' è una macchina utilizzata per i test Egalware interni
+- (GEN) Chiamando la macchina con un nome che termini con '.TEST' si abilita come macchina per test interni, equivalente a settare 'IS_TEST_MACHINE' (che comunque rimane)
+- (SIM-GEN) Modificato movimenti testa sotto. Prima si muove in quota 'ParkMchY2' e poi va alla coordinata di lavoro ruotando gli assi
+- (SIM) Per lavorazioni in doppio, viene subito scritta la quota Z. La generazione era già corretta. Ticket#1377
+- (GEN) Ripristinato movimento iniziale testa sopra assieme alle pinze. Spostato comando wait dopo primo movimento testa. Ticket#1730
+- (MLDE-SIM-GEN) Aggiunto parametro MaxZ1Blade per differenziare Z massima aggregato lama e altri utensili.
+- (SIM) Aggiunto controllo con solido di collisione per verificare di non salire oltre il massimo
+- (SIM) Corretta simulazione scambio testa 3 -> testa 1
+
 Versione 2.6d1 (09/04/2024)
 - (GEN) Corretto impostazione piano G24 con testa da sotto con aggregato
 - (SIM-GEN) Corretta posizione prelievo/parcheggio se lama su aggregato da sotto

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_PF1250',            -- nome script PP standard
-   VERSION = '2.6d1',                 -- versione script
+   VERSION = '2.6d2',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }