- Allineamento con common ver. 2.7d1

- Aggiornamento MachNotes

Beam/BeamData.lua

@@ -236,11 +236,19 @@ local function GetSetupInfo( sHead)
       SetupInfo.HeadType = { bTop = true, bBottom = false}
       SetupInfo.PreferredSide = { bFront = false, bBack = true}
       SetupInfo.dMinNz = sin( -45)
+      -- se con aggregato si considera non simmetrico
+      SetupInfo.bIsCSymmetrical = false
+      -- riduzione massimo materiale se usato in tagli orizzontali con affondamento verticale
+      SetupInfo.dMaxMatDecrease = 20
    -- lama su testa 5 assi da sopra, davanti
    elseif sHead == 'H22' then
       SetupInfo.HeadType = { bTop = true, bBottom = false}
       SetupInfo.PreferredSide = { bFront = true, bBack = false}
       SetupInfo.dMinNz = sin( -45)
+      -- se con aggregato si considera non simmetrico
+      SetupInfo.bIsCSymmetrical = false
+      -- riduzione massimo materiale se usato in tagli orizzontali con affondamento verticale
+      SetupInfo.dMaxMatDecrease = 20
    -- motosega 1
    elseif sHead == 'H13' or sHead == 'H23' then
       SetupInfo.HeadType = { bTop = true, bBottom = false}

Common_ONE-PF.mlpe

@@ -24,7 +24,7 @@ end
 ---------------------------------------------------------------------
 -- *** SIMULATION ***
 ---------------------------------------------------------------------
-local COLL_SAFE_DIST = 4
+local COLL_SAFE_DIST = 3
 
 ---------------------------------------------------------------------
 function OnSimulInit()
@@ -238,7 +238,7 @@ function OnSimulDispositionStart()
             end
             -- determino la risoluzione dello Zmap
             local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
-            local dTol = 4.51
+            local dTol = 4.00
             if dArea < CoeffVM * 0.5e6 then
                dTol = 1.01
             elseif dArea < CoeffVM * 1.2e6 then

Essetre-PF.mlde

@@ -32,8 +32,8 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.7c3'
-PP_NVER = '2.7.3.3'
+PP_VER = '2.7d1'
+PP_NVER = '2.7.4.1'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-PF'
 

MachNotes.ini

@@ -7,18 +7,19 @@
 [Sawing]
 
 [Milling]
-0=d,MaxElev,0
+0=l,MaxElev,0
 1=d,OutRaw,0
-2=d,SideElev,0
+2=l,SideElev,0
 3=d,TrimExt,0
-4=sr,VtFaceUse,0,0,0
+4=s,VtFaceUse,0,0,0
+5=s,EdgesFaceUse,0
 
 [Pocketing]
-0=d,MaxElev,0
+0=l,MaxElev,0
 1=b,Open,0
-2=d,OpenMinSave,0
+2=d,OpenMinSafe,0
 3=d,OpenOutRaw,0
-4=d,MaxOptSize,0
+4=l,MaxOptSize,0
 
 [Mortising]
 0=d,MaxElev,0
@@ -30,21 +31,28 @@
 [SawFinishing]
 
 [GenMachining]
-0=l,LinTol,0.1
-1=l,MaxLen,2
-2=s,Type,ZigZag
-3=d,SideAng,90
-4=l,Step,10
-5=l,OffsProj,0
-6=l,LiTang,0
-7=l,LiOrth,0
-8=l,LiElev,0
-9=l,LoTang,0
-10=l,LoOrth,0
-11=l,LoElev,0
-12=b,DirFromGuide,1
 
 [SurfRoughing]
+0=l,MaxElev,1000
+1=b,PlaneZ,0
 
 [SurfFinishing]
 0=b,SkipMaxDown,1
+
+[5AxMilling]
+0=l,LinTol,0.01
+1=l,MaxLen,10
+2=s,Type,ZigZag
+3=d,SideAng,90
+4=l,Step,10
+5=d,AngIni,-90
+6=d,AngFin,90
+7=l,LiTang,0
+8=l,LiOrth,0
+9=l,LiElev,0
+10=l,LoTang,0
+11=l,LoOrth,0
+12=l,LoElev,0
+13=b,DirFromGuide,0
+14=b,SurfAvoid,0
+

UpdateLog.txt

@@ -1,5 +1,8 @@
            ==== Common_ONE-PF Update Log ====
 
+Versione 2.7d1 (16/04/2025)
+- (SIM) Distanza di collisione portata a 3mm, qualità VMILL ridotta a 4mm. Ticket#2395
+
 Versione 2.7c3 (25/03/2025)
 - (GEN) Corretto movimento approccio alla lavorazione se utensile lama montata su magazzino 2. Ticket#2361
 

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_ONE-PF',            -- nome script PP standard
-   VERSION = '2.7c3',                 -- versione script
+   VERSION = '2.7d1',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }