Cambio versione

- Tolto chiamata debug

Beam/BeamData.lua

@@ -105,6 +105,7 @@ if EgtExistsFile( sData) then
          BeamData.ADVANCE_TAIL_OFFS = Machine.Offsets.ADVANCE_TAIL_OFFS or BeamData.ADVANCE_TAIL_OFFS
          BeamData.LEN_VERY_SHORT_PART = Machine.Offsets.LEN_VERY_SHORT_PART or BeamData.LEN_VERY_SHORT_PART
          BeamData.LEN_SHORT_PART = Machine.Offsets.LEN_SHORT_PART or BeamData.LEN_SHORT_PART
+         BeamData.MAX_DIM_HTCUT_HBEAM = Machine.Offsets.MAX_DIM_HTCUT_HBEAM or BeamData.MAX_DIM_HTCUT_HBEAM
          if Machine.Offsets.PRECUT_HEAD_DISABLE then BeamData.PRECUT_HEAD = ( Machine.Offsets.PRECUT_HEAD_DISABLE == 0) end
          if Machine.Offsets.PRECUT_TAIL_DISABLE then BeamData.PRECUT_TAIL = ( Machine.Offsets.PRECUT_TAIL_DISABLE == 0) end
          if Machine.Offsets.MIN_HEIGHT_ADDED_CUTS then BeamData.MIN_HEIGHT_ADDED_CUTS = min( Machine.Offsets.MIN_HEIGHT_ADDED_CUTS, BeamData.MIN_HEIGHT_ADDED_CUTS) end
@@ -189,31 +190,31 @@ local function GetSetupInfo( sHead)
    local SetupInfo = {}
 
    -- dati comuni
-   SetupInfo.bIsCSymmetric = false
+   SetupInfo.bIsCSymmetrical = false
    SetupInfo.dCAxisEncumbrance = 180
    SetupInfo.bToolOnAggregate = false
 
    -- testa 5 assi da sopra
    if sHead == 'H1' then
-      SetupInfo.bIsTopHead = true
-      SetupInfo.bIsBottomHead = not SetupInfo.bIsTopHead
-      SetupInfo.dMaxNegativeAngle = sin( -45)
+      SetupInfo.HeadType = { bTop = true, bBottom = false}
+      SetupInfo.PreferredSide = {}
+      SetupInfo.dMinNz = sin( -45)
    -- lama su testa 5 assi da sopra
    elseif sHead == 'H2' then
-      SetupInfo.bIsTopHead = true
-      SetupInfo.bIsBottomHead = not SetupInfo.bIsTopHead
-      SetupInfo.dMaxNegativeAngle = sin( -45)
+      SetupInfo.HeadType = { bTop = true, bBottom = false}
+      SetupInfo.PreferredSide = {}
+      SetupInfo.dMinNz = sin( -45)
    -- motosega
    elseif sHead == 'H3' then
-      SetupInfo.bIsTopHead = true
-      SetupInfo.bIsBottomHead = not SetupInfo.bIsTopHead
-      SetupInfo.dMaxNegativeAngle = 0
+      SetupInfo.HeadType = { bTop = true, bBottom = false}
+      SetupInfo.PreferredSide = {}
+      SetupInfo.dMinNz = 0
    -- rinvio angolare 90° (considerato come fosse una testa da sotto)
    elseif sHead == 'H5' then
       SetupInfo.bToolOnAggregate = true
-      SetupInfo.bIsBottomHead = true
-      SetupInfo.bIsTopHead = not SetupInfo.bIsBottomHead
-      SetupInfo.dMaxPositiveAngle = 0
+      SetupInfo.HeadType = { bTop = false, bBottom = true}
+      SetupInfo.PreferredSide = {}
+      SetupInfo.dMaxNz = 0
    end
 
    return SetupInfo

Common_FAST.NUM_PLUS.mlpe

@@ -493,7 +493,7 @@ function OnMachiningEnd()
    end
    for i = 1, #EMT.AUXSTR do
       local sOut = EMT.AUXSTR[i]
-      if EMT.AUXTYPE == 'S' then
+      if EMT.AUXTYPE == 'S' and sOut:find( 'G101 ') then
          sOut = sOut .. ' EH1'
       elseif EMT.AUXTYPE == 'U' and not EMT.CHY_ON and not sOut:find( 'ET') then
          sOut = sOut .. ' ET2'

Common_FAST.TPA.mlpe

@@ -21,13 +21,16 @@ function OnStart()
    EMT.USETO1 = false     -- abilitazione uso origine tavola
    EMT.MODAL = true       -- abilitazione emissione modale
    EMT.INCHES = false     -- unità di misura mm/inches
-   EMT.DECNUM = 5         -- numero di decimali dopo la virgola
+   EMT.DECNUM = 4         -- numero di decimali dopo la virgola
+   EMT.DECVERS = 6        -- numero di decimali dopo la virgola per versori
+   EMT.DECRAD = 4         -- numero di decimali dopo la virgola per raggio
+   EMT.DECMACRO = 3       -- numero di decimali dopo la virgola per macro
    EMT.NUM = false        -- abilitazione numerazione linee
-   --EMT.Nt = 'N'           -- token per la numerazione di linea
-   --EMT.LINENBR = 0        -- numero di linea
-   --EMT.LINEINC = 1        -- incremento numerazione linee
-   --EMT.Ft = 'F'           -- token per feed
-   --EMT.St = 'S'           -- token per speed
+   --EMT.Nt = 'N'         -- token per la numerazione di linea
+   --EMT.LINENBR = 0      -- numero di linea
+   --EMT.LINEINC = 1      -- incremento numerazione linee
+   --EMT.Ft = 'F'         -- token per feed
+   --EMT.St = 'S'         -- token per speed
    EMT.FMAXPINZE = 154000 -- feed massima pinze
 end
 
@@ -116,8 +119,8 @@ end
 function OnToolData()
    -- emissione dati utensili
    if EMT.HEAD == 'H1' then
-      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
-                   ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
+      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.TDIAM, EMT.DECMACRO) ..
+                   ' P4=' .. EmtLenToString( EMT.SMAX, EMT.DECMACRO) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, EMT.DECMACRO)
       ParkLine( sOut)
       -- cerco posizione di attrezzaggio del primo utensile di lavorazione
       if EMT.TOOL == EMT.TOOL_1  and  EMT.TLEN_1 < LONG_TOOL_MINLEN then
@@ -125,14 +128,14 @@ function OnToolData()
       end
    -- emissione dati lama
    elseif EMT.HEAD == 'H2' then
-      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
-                   ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
+      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.TDIAM, EMT.DECMACRO) ..
+                   ' P4=' .. EmtLenToString( EMT.SMAX, EMT.DECMACRO) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, EMT.DECMACRO)
       ParkLine( sOut)
    -- emissione dati sega a catena
    elseif EMT.HEAD == 'H3' then
       if EMT.TDIST and abs( EMT.TDIST) < 0.1 then EMT.TDIST = nil end
-      local sData = ' P2=' .. EmtLenToString( ( EMT.TDIST or ChSawLen), 3) .. ' P3=' .. EmtLenToString( EMT.TLEN, 3) ..
-                    ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( ( EMT.TDIST or ChSawLen), 3)
+      local sData = ' P2=' .. EmtLenToString( ( EMT.TDIST or ChSawLen), EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.TLEN, EMT.DECMACRO) ..
+                    ' P4=' .. EmtLenToString( EMT.SMAX, EMT.DECMACRO) .. ' P5=' .. EmtLenToString( ( EMT.TDIST or ChSawLen), EMT.DECMACRO)
       if EMT.TCPOS == 'T101' then
          ParkLine( 'M992 P1=101' .. sData)
          ParkLine( 'M992 P1=102' .. sData)
@@ -148,13 +151,13 @@ function OnToolData()
    elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
       local nPos = EgtIf( EMT.HEAD == 'H5', 91, 93)
       if EMT.EXIT == 2 then nPos = nPos + 1 end
-      local sOut = 'M992 P1=' .. EgtNumToString( nPos, 0) .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
-                   ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
+      local sOut = 'M992 P1=' .. EgtNumToString( nPos, 0) .. ' P2=' .. EmtLenToString( EMT.TLEN, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.TDIAM, EMT.DECMACRO) ..
+                   ' P4=' .. EmtLenToString( EMT.SMAX, EMT.DECMACRO) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, EMT.DECMACRO)
       ParkLine( sOut)
    -- emissione dati sega a catena
    elseif EMT.HEAD == 'H7' then
-      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
-                   ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
+      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.TDIAM, EMT.DECMACRO) ..
+                   ' P4=' .. EmtLenToString( EMT.SMAX, EMT.DECMACRO) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, EMT.DECMACRO)
       ParkLine( sOut)
 -- altro non previsto
    else
@@ -224,8 +227,8 @@ function OnDispositionEnd()
 
       if IdTrave >= 0 then
          local sPrt = '( *** Part '.. EgtNumToString( IdTrave, 0) ..' ***)'
-         local sOut = '( SN=' .. IdTrave .. ' LBarra=' .. EmtLenToString( LBarra, 3) .. ' L='..EmtLenToString( LTrave, 3) ..
-                      ' H=' .. EmtLenToString( HTrave, 3) .. ' S=' .. EmtLenToString( STrave, 3) .. ' )'
+         local sOut = '( SN=' .. IdTrave .. ' LBarra=' .. EmtLenToString( LBarra, EMT.DECMACRO) .. ' L='..EmtLenToString( LTrave, EMT.DECMACRO) ..
+                      ' H=' .. EmtLenToString( HTrave, EMT.DECMACRO) .. ' S=' .. EmtLenToString( STrave, EMT.DECMACRO) .. ' )'
          EMT.PRODID = EgtGetInfo( BtlInfoId, 'PRODID', 'i') or 0
          EMT.PATTID = EgtGetInfo( BtlInfoId, 'PATTID', 'i') or 0
          EMT.CUTID = EgtGetInfo( EMT.IDT, 'CUTID', 'i') or 0
@@ -656,9 +659,9 @@ function OnRapid()
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
       if EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
-         local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( MyZHome, 3) ..
-                                 ' P4=' .. EgtNumToString( EMT.R2pp, 3) .. ' P5=' .. EgtNumToString( EMT.R1pp, 3) .. 
-                                 ' P6=' .. EgtNumToString( EMT.PREVTCPOS, 3) .. ' P7=' .. EgtNumToString( EMT.PREVS, 0) ..
+         local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
+                                 ' P4=' .. EgtNumToString( EMT.R2pp, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1pp, EMT.DECMACRO) .. 
+                                 ' P6=' .. EgtNumToString( EMT.PREVTCPOS, EMT.DECMACRO) .. ' P7=' .. EgtNumToString( EMT.PREVS, 0) ..
                                  ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')
          EmtOutput( sOutPreMove)
          EmtOutput( 'M101 P1=2')
@@ -672,8 +675,8 @@ function OnRapid()
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
       if ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
-         local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( MyZHome, 3) ..
-                                 ' P4=' .. EgtNumToString( EMT.R2, 3) .. ' P5=' .. EgtNumToString( EMT.R1, 3) .. 
+         local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
+                                 ' P4=' .. EgtNumToString( EMT.R2, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1, EMT.DECMACRO) .. 
                                  ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                                  ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')
          EmtOutput( sOutPreMove)
@@ -687,8 +690,8 @@ function OnRapid()
       if EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          MyZPos = MyZHome
       end
-      local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, 3) .. ' P3=' .. EmtLenToString( MyZPos, 3) ..
-                       ' P4=' .. EgtNumToString( EMT.R2, 3) .. ' P5=' .. EgtNumToString( EMT.R1, 3) .. 
+      local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZPos, EMT.DECMACRO) ..
+                       ' P4=' .. EgtNumToString( EMT.R2, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1, EMT.DECMACRO) .. 
                        ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                        ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')
       if EMT.LOAD then
@@ -738,7 +741,7 @@ function OnRapid()
             sV = EmtLenToString( ParkV)
             sB = '2'
          end
-         sOut = 'M112 P1='..EmtLenToString( EMT.L1, 3)..' P3='..sA..' P4='..sB..' P5=0 P6='..sY..' P7='..sV..' P9='..GetFmaxClamp()
+         sOut = 'M112 P1='..EmtLenToString( EMT.L1, EMT.DECMACRO)..' P3='..sA..' P4='..sB..' P5=0 P6='..sY..' P7='..sV..' P9='..GetFmaxClamp()
          ParkLine( sOut)
          EMT.LOAD = false
          -- emissione prime linee speciali e linee parcheggiate
@@ -789,7 +792,7 @@ function OnRapid()
             sOut = 'M101 P1=3'
             EmtOutput( sOut)
          end
-         sOut = 'M112 P1=' .. EmtLenToString( EMT.L1, 3) ..' P3='..sA..' P4='..sB..' P6='..sY..' P7='..sV..' P9=' .. GetFmaxClamp()
+         sOut = 'M112 P1=' .. EmtLenToString( EMT.L1, EMT.DECMACRO) ..' P3='..sA..' P4='..sB..' P6='..sY..' P7='..sV..' P9=' .. GetFmaxClamp()
          EmtOutput( sOut)
          if not bHeadFirst then
             sOut = 'M101 P1=2'
@@ -861,15 +864,15 @@ function OnRapid()
       if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
          local dBAxis = 90
          local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)
-         local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
-                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+         local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.L3, EMT.DECMACRO) ..
+                      ' P4=' .. EgtNumToString( dBAxis, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( dCAxis, EMT.DECMACRO) .. 
                       ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                       ' P8=0' .. ' P9=0' .. ' P10=3'
          EmtOutput( sOut)
          EmtOutput( 'M101 P1=2')
          EmtOutput( 'M101 P1=3')
-         sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
-                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+         sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.L3, EMT.DECMACRO) ..
+                      ' P4=' .. EgtNumToString( dBAxis, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( dCAxis, EMT.DECMACRO) .. 
                       ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                       ' P8=0' .. ' P9=0' .. ' P10=3'
          EmtOutput( sOut)
@@ -886,8 +889,8 @@ function OnRapid()
       MyAdjustLinearAxes()
       EmtAdjustRotaryAxes()
       EmtResetPrev()
-      local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
-                   ' P4=' .. EgtNumToString( EMT.R2, 3) .. ' P5=' .. EgtNumToString( EMT.R1, 3) .. 
+      local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( EMT.L3, EMT.DECMACRO) ..
+                   ' P4=' .. EgtNumToString( EMT.R2, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1, EMT.DECMACRO) .. 
                    ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                    ' P8=0' .. ' P9=0' .. ' P10=3'
       EmtOutput( sOut)
@@ -1007,7 +1010,7 @@ function OnArc()
    --local sCen = ' ' .. EMT.C1t .. EmtLenToString(EMT.C1,3) ..
    --             ' ' .. EMT.C2t .. EmtLenToString(EMT.C2,3)
    -- raggio
-   local sRad = ' ' .. EMT.RRt .. EmtLenToString( EMT.RR, EMT.DECNUM)
+   local sRad = ' ' .. EMT.RRt .. EmtLenToString( EMT.RR, EMT.DECRAD)
    -- aggiungo feed
    local sFeed = EmtGetFeed()
    -- tipo arco
@@ -1767,9 +1770,9 @@ function CalcInterpPlane()
    local vtY = EMT.IPLGLFR:getVersY()
    local vtZ = EMT.IPLGLFR:getVersZ()
    EMT.IPLGLSTR = ' X0 Y' .. EmtLenToString( xS, EMT.DECNUM) .. ' Z0' ..
-                  ' A' .. EgtNumToString( - vtX:getY(), 6) .. ' B' .. EgtNumToString( vtX:getX(), 6) .. ' C' .. EgtNumToString( vtX:getZ(), 6) ..
-                  ' I' .. EgtNumToString( - vtY:getY(), 6) .. ' J' .. EgtNumToString( vtY:getX(), 6) .. ' K' .. EgtNumToString( vtY:getZ(), 6) ..
-                  ' P' .. EgtNumToString( - vtZ:getY(), 6) .. ' Q' .. EgtNumToString( vtZ:getX(), 6) .. ' R' .. EgtNumToString( vtZ:getZ(), 6)
+                  ' A' .. EgtNumToString( - vtX:getY(), EMT.DECVERS) .. ' B' .. EgtNumToString( vtX:getX(), EMT.DECVERS) .. ' C' .. EgtNumToString( vtX:getZ(), EMT.DECVERS) ..
+                  ' I' .. EgtNumToString( - vtY:getY(), EMT.DECVERS) .. ' J' .. EgtNumToString( vtY:getX(), EMT.DECVERS) .. ' K' .. EgtNumToString( vtY:getZ(), EMT.DECVERS) ..
+                  ' P' .. EgtNumToString( - vtZ:getY(), EMT.DECVERS) .. ' Q' .. EgtNumToString( vtZ:getX(), EMT.DECVERS) .. ' R' .. EgtNumToString( vtZ:getZ(), EMT.DECVERS)
    EMT.IPLGL = true
 end
 

Common_FAST.mlpe

@@ -466,8 +466,10 @@ function OnSimulToolSelect( dPosA)
    EMT.TOTDIAM = EgtTdbGetCurrToolParam( MCH_TP.TOTDIAM)
    -- se non è chiamato da altro script (non c'è parametro)
    if not dPosA then
-      -- se attivo Vmill
-      SetToolForVmill( EMT.TOOL, EMT.HEAD, EMT.EXIT, EMT.VMILL)
+      -- se utensile non flottante, abilito per Vmill
+      if not EMT.TFLOAT then
+         EmtSetToolForVmill( EMT.TOOL, EMT.HEAD, EMT.EXIT, EMT.VMILL)
+      end
       -- se attivo Collision Check
       EMT.SAFEDIST = COLL_SAFE_DIST
       if EMT.COLLOBJ then
@@ -527,6 +529,14 @@ function OnSimulToolSelect( dPosA)
             EgtSetAxisPos( 'B', 0)
          end
       end
+      -- se TC 1
+      if GetTCSet( EMT.TCPOS) == 1 then
+         EgtSetAxisPos( 'B', 90)
+      else
+         if EMT.HEAD ~= 'H3' then
+            EgtSetAxisPos( 'B', -90)
+         end
+      end
       -- breve pausa
       EgtPause( 100)
       EgtOutText( '')
@@ -576,7 +586,11 @@ function OnSimulToolDeselect()
          -- altrimenti posizioni standard rastrelliera
          else
             SimulMoveAxis( 'X', 0, MCH_SIM_STEP.RAPID)
-            SimulMoveAxes( 'B', 90, MCH_SIM_STEP.COLLROT, 'C', -90, MCH_SIM_STEP.COLLROT)
+            if GetTCSet( EMT.TCPOS) == 1 then
+               SimulMoveAxes( 'B', 90, MCH_SIM_STEP.COLLROT, 'C', -90, MCH_SIM_STEP.COLLROT)
+            else
+               SimulMoveAxes( 'B', -90, MCH_SIM_STEP.COLLROT, 'C', -90, MCH_SIM_STEP.COLLROT)
+            end
          end
       -- movimento scarico utensile di grosso diametro (su T111)
       else
@@ -590,18 +604,25 @@ function OnSimulToolDeselect()
       -- nascondo utensile su testa e lo visualizzo su TcPos
       EgtSetMode( EgtGetHeadId( EMT.HEAD), GDB_MD.HIDDEN)
       ShowToolInTcPos( EMT.TCPOS_1, true)
+
       -- movimento per carico utensile
       if EMT.NEXTHEAD ~= 'H3' and EMT.NEXTHEAD ~= 'H5' and EMT.NEXTHEAD ~= 'H6' then
-         SimulMoveAxes( 'B', 90, MCH_SIM_STEP.RAPROT, 'C', EgtIf( BD.RIGHT_LOAD, 90, -90), MCH_SIM_STEP.RAPROT)
+         SimulMoveAxes( 'B', EgtIf( GetTCSet( EMT.TCPOS) == 1, 90, -90), MCH_SIM_STEP.RAPROT, 'C', EgtIf( BD.RIGHT_LOAD, 90, -90), MCH_SIM_STEP.RAPROT)
       else
          SimulMoveAxes( 'B', 0, MCH_SIM_STEP.RAPROT, 'C', EgtIf( BD.RIGHT_LOAD, 90, -90), MCH_SIM_STEP.RAPROT)
       end
       -- se segue lama, carico utensile di default
       if EMT.NEXTHEAD == 'H2' then
          local sDefTool = GetDefaultToolName()
-         EgtLoadTool( 'H1', 1, sDefTool)
          EMT.TOOL_1 = sDefTool
          EMT.TCPOS_1 = GetToolTcPos( EMT.TOOL_1)
+         -- se TC 1
+         if GetTCSet( EMT.TCPOS_1) == 1 then
+            EgtSetAxisPos( 'B', 90)
+         else
+            EgtSetAxisPos( 'B', -90)
+         end
+         EgtLoadTool( 'H1', 1, sDefTool)
          -- lo nascondo sul portautensili
          ShowToolInTcPos( EMT.TCPOS_1, false)
       end
@@ -768,7 +789,6 @@ function OnSimulMoveStart()
       EgtOutText( '')
       EMT.MCHFIRST = false
       local bZmax = ( EMT.TOOL ~= EMT.PREVTOOL  or EMT.L3 > -1)
-
       -- con pezzi alti aggiorno gli assi rotanti prima di muovermi sopra il pezzo
       if not EMT.LOAD and EMT.MOVE == 0 and EMT.HB > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          -- se motosega mi muovo a X di sicurezza per ruotare
@@ -778,20 +798,59 @@ function OnSimulMoveStart()
       end
       EMT.POSTROT = nil
    end
+   -- se aggregato flottante su inizio attacco va compresso
+   if EMT.TFLOAT and not EMT.TFLOAT_CMP and EMT.MOVE == 1 and EgtGetName( EMT.MOVEID) == 'LI' then
+      -- recupero lunghezza 
+      local dOffsL = - EgtGetMachiningParam( MCH_MP.OFFSL)
+      -- imposto compressione della parte flottante
+      SetFloatPos( EMT.HEAD, dOffsL)
+      -- imposto dati utensile in posizione compressa
+      EmtSetToolForVmill( EMT.TOOL, EMT.HEAD, EMT.EXIT, EMT.VMILL, 2, -dOffsL)
+      -- dichiaro che è compresso (assegnando Id entità di movimento)
+      EMT.TFLOAT_CMP = EMT.MOVEID
+   end
 end
 
 ---------------------------------------------------------------------
 function OnSimulMoveEnd()
+   -- se termine di passata con lama
    if EMT.FLAG == 301 then 
       -- rimozione eventuali sfridi
       ExecRemoveScraps()
    end
+   -- se utensile flottante e movimento di compressione
+   if EMT.TFLOAT and EMT.MOVEID == EMT.TFLOAT_CMP then
+      -- verifico ci sia stata collisione tra ghiera flottante (portautensile e pezzo)
+      if not EMT.TFLOAT_TH_COMPR_COLL then
+         local sErr = 'CUTID='..tostring( EMT.CUTID)..'; TASKID='..tostring( EMT.TASKID)..'; Mach='..EMT.MCHNAME..'; Floating Ring not compressed on approach'
+         EmtSetLastError( 1222, sErr)
+         EgtOutLog( 'Error : ' .. sErr, 1)
+      else
+         EgtOutLog( 'Floating Ring compressed on approach (MOVEID='..EgtNumToString( EMT.MOVEID)..')', 1)
+      end
+      EMT.TFLOAT_TH_COMPR_COLL = nil
+   end
+   -- se aggregato flottante su fine uscita va rilasciato
+   if EMT.TFLOAT and EMT.TFLOAT_CMP and EMT.MOVE == 1 and EgtGetName( EMT.MOVEID) == 'LO' and EgtGetName( EgtGetNext( EMT.MOVEID) or GDB_ID.NULL) ~= 'LO' then
+      -- reset compressione della parte flottante
+      SetFloatPos( EMT.HEAD, 0)
+      -- dichiaro che è rilasciato
+      EMT.TFLOAT_CMP = nil
+   end
 end
 
 ---------------------------------------------------------------------
 function OnSimulCollision()
    -- se prima collisione della lavorazione, la segnalo
    if EMT.MCHNAME ~= EMT.LAST_MCHNAME_COLLIDE then
+      -- speciale per utensile flottante (suo holder contro il grezzo)
+      if EMT.TFLOAT and EMT.TFLOAT_CMP and EMT.SIMCOBIND == 1002 and EMT.SIMVMID == EMT.VMILL[1] then
+         if EMT.MOVEID == EMT.TFLOAT_CMP then
+            EMT.TFLOAT_TH_COMPR_COLL = true
+         end
+         return
+      end
+      -- standard
       local Class = ''
       if EMT.SIMCOBIND == 1001 then
          Class = 'T_H1'

Common_FAST.mlse

@@ -7,6 +7,12 @@ EgtEnableDebug( false)
 -- carico librerie
 local BD = require( 'BeamData')
 
+---------------------------------------------------------------------
+-- *** Generic Machinings ***
+---------------------------------------------------------------------
+pcall( require, 'EmtGenMachining')  -- si fa una require con PCALL perchè la libreria è opzionale
+
+
 ---------------------- OnSpecialMoveZup -----------------------------
 ---------------------------------------------------------------------
 function OnSpecialMoveZup()
@@ -367,7 +373,18 @@ function OnSpecialApplyDisposition()
    EMC.HOVM = EgtGetInfo( nCurrRawId, 'HOVM', 'd') or 0
    EMC.HCING = EgtGetInfo( nCurrRawId, 'HCING', 'd') or 0
    EMC.TCING = EgtGetInfo( nCurrRawId, 'TCING', 'd') or 0
-   
+
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local sNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
+
    -- Devo scaricare il pezzo o il grezzo rimasto
    -- Posizione trave
    local dPosT
@@ -511,6 +528,17 @@ function OnPostApplyMachining()
    local bSplitting = ( sNotes:find( 'Split') ~= nil)
    local bPreCut = ( sNotes:find( 'Precut') ~= nil)
    local bCutting = ( sNotes:find( 'Cut') ~= nil)
+
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
+
    local bUnload = IsEndPhase( EMC.PHASE) or IsEnd2Phase( EMC.PHASE)
    if bPreSplit or bPreCut then
       EgtSetInfo( EMC.MCHID, 'IS_PRE', '1')
@@ -634,6 +662,17 @@ function SpecApplyPath( bPreSplit, bSplitting, bPreCut, bCutting, bUnload, bPreR
    EMC.HOVM = EgtGetInfo( nCurrRawId, 'HOVM', 'd') or 0
    EMC.HCING = EgtGetInfo( nCurrRawId, 'HCING', 'd') or 0
    EMC.TCING = EgtGetInfo( nCurrRawId, 'TCING', 'd') or 0
+   
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local sNotes = EgtGetMachiningParam( MCH_MP.USERNOTES)
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
 
    -- Calcolo dell'ingombro della lavorazione
    local dDistFront, dDistBack = SpecialCalcMachiningEncumbrance( EMC.MCHID, bPreCut)
@@ -1682,7 +1721,7 @@ function SpecAdjustCarriages( vCmd, dTPosI, dYDeltaI, dVDeltaI, dTPosF, dYDeltaF
             if abs( dYDeltaF - dYDeltaI) > 10 * GEO.EPS_SMALL then
                table.insert( vCmd, { 11, 0})
                dYPosA = max( MyMinY, dTPosI + dYDeltaF)
-               dTPosA = -( dYPosA + dVDeltaF)
+               dTPosA = dYPosA - dYDeltaF
                dVPosA = dTPosA + dVDeltaF
                table.insert( vCmd, { 3, 'Y', dYPosA , 'T', dTPosA, 'V', dVPosA})
                table.insert( vCmd, { 11, CalcCharStatus( 'Y', dYDeltaF)})

Essetre-FAST.mlde

@@ -24,8 +24,8 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.7a2'
-PP_NVER = '2.7.1.2'
+PP_VER = '2.7c2'
+PP_NVER = '2.7.3.2'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-FAST'
 
@@ -90,6 +90,7 @@ BeamHeightForFixRot = 9999                     -- per abilitare assegnare 500
 NewTopC = true
 SafeXRotAxes = 150
 AggreBlockHaus = false
+SecondToolChanger = false
 EstimationRapidMultiplier = 1
 
 -- leggo e aggiorno con parametri da BeamData
@@ -159,12 +160,17 @@ if EgtExistsFile( sData) then
          if Machine.Offsets.MIN_JOIN_LL then MinJoinLL = Machine.Offsets.MIN_JOIN_LL end
          if Machine.Offsets.NEWTOPC then NewTopC = ( Machine.Offsets.NEWTOPC == 1) end
          if Machine.Offsets.AGGRE_BH then AggreBlockHaus = ( Machine.Offsets.AGGRE_BH == 1) end
+         if Machine.Offsets.SEC_TC then SecondToolChanger = ( Machine.Offsets.SEC_TC == 1) end
          if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
       end
    end
 end
 if SpecialBH then SecondSupport = 0 end
 
+-- compongo i gruppi appartenenti alla base
+local sBaseAux = {'BASE/SOLID', 'BASE/TC', 'BASE/SIGN', 'BASE/COLLISION'}
+if SecondToolChanger then table.insert( sBaseAux, 5, 'BASE/TC2') end
+
 EmtGeneral {
       File='Essetre-FAST.nge',
       Offset = Vector3d( 0, 1150.16, -1500.0),
@@ -178,7 +184,8 @@ EmtGeneral {
 local BaseId = EmtBase {
       Name = 'Base',
       Geo='BASE/GEO',
-      Aux={'BASE/SOLID', 'BASE/TC', 'BASE/SIGN', 'BASE/COLLISION'}}
+      Aux = sBaseAux}
+
 local XId = EmtAxis {
       Name = 'X',
       Parent = 'Base',
@@ -338,6 +345,7 @@ if AggreBlockHaus then
       Geo = 'H7_HEAD/GEO',
       Aux = {'H7_HEAD/SOLID', 'H7_HEAD/COLLISION'}}
 end
+
 -- Morse
 local YId = EmtAxis {
       Name = 'Y',
@@ -468,22 +476,83 @@ EmtTcPos {
       TDir = -X_AX(),
       ADir = -Y_AX(),
       Geo = 'BASE/T10'}
-EmtTcPos {
-      Name = 'T11',
-      Parent = 'Base',
-      Pos = Point3d( 523.8, 88.0, -877.5),
-      TDir = -X_AX(),
-      ADir = -Y_AX(),
-      Geo = 'BASE/T11'}
-if not SpecialBH then
-   EmtTcPos {
-         Name = 'T101',
+if AggreBlockHaus then
+   local TcpSsId = EmtTcPos {
+         Name = 'T11',
          Parent = 'Base',
-         Pos = Point3d( -510.4, 113.2, -160.8),
-         TDir = X_AX(),
-         ADir = Z_AX(),
-         Geo = 'BASE/T101'}
+         Pos = Point3d( 678.3, -1.963, -877.5),
+         TDir = Y_AX(),
+         ADir = -X_AX(),
+         Geo = 'BASE/T121',
+         Aux = 'BASE/T121_HS'}
 else
+   EmtTcPos {
+         Name = 'T11',
+         Parent = 'Base',
+         Pos = Point3d( 523.8, 88.0, -877.5),
+         TDir = -X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T11'}
+end
+
+-- ToolChanger 2
+if SecondToolChanger then
+   EmtTcPos {
+         Name = 'T21',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, 172.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T21'}
+   EmtTcPos {
+         Name = 'T22',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, 67.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T22'}
+   EmtTcPos {
+         Name = 'T23',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -37.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T23'}
+   EmtTcPos {
+         Name = 'T24',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -142.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T24'}
+   EmtTcPos {
+         Name = 'T25',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -247.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T25'}
+   EmtTcPos {
+         Name = 'T26',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -352.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T26'}
+   EmtTcPos {
+         Name = 'T27',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -457.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T27'}
+   EmtTcPos {
+         Name = 'T28',
+         Parent = 'Base',
+         Pos = Point3d( -503.2, 88.0, -562.5),
+         TDir = X_AX(),
+         ADir = -Y_AX(),
+         Geo = 'BASE/T28'}
    EmtTcPos {
          Name = 'T101',
          Parent = 'Base',
@@ -491,59 +560,66 @@ else
          TDir = X_AX(),
          ADir = Z_AX(),
          Geo = 'BASE/T101S'}
-end
-if SecondSupport == 1 then
-   -- supporto per punta
-   EmtTcPos {
-         Name = 'T111',
-         Parent = 'Base',
-         Pos = Point3d( -510.4, 113.2, -329.8),
-         TDir = Z_AX(),
-         ADir = X_AX(),
-         Geo = 'BASE/T111'}
-elseif SecondSupport == 2 then
-   -- supporto per mortasatrice
-   local TcpSsId = EmtTcPos {
-                        Name = 'T111',
-                        Parent = 'Base',
-                        Pos = Point3d( -510.4, 113.2, -430.8),
-                        TDir = X_AX(),
-                        ADir = Z_AX(),
-                        Geo = 'BASE/T111M'}
-   EgtSetInfo( TcpSsId, 'Mortiser', true)
-elseif SecondSupport == 3 then
-   -- supporto per rinvio angolare
-   local TcpSsId = EmtTcPos {
-                        Name = 'T91',
-                        Parent = 'Base',
-                        ExitNbr = 2,
-                        Pos1 = Point3d( -710.4-150, 113.2, -329.8-170),
-                        TDir1 = X_AX(),
-                        Pos2 = Point3d( -710.4+150, 113.2, -329.8-170),
-                        TDir2 = -X_AX(),
-                        ADir = Z_AX(),
-                        Geo = 'BASE/T91',
-                        Aux = 'BASE/T91_HS'}
-end
-if SpecialBH then
-   EmtTcPos {
-         Name = 'T111',
-         Parent = 'Base',
-         Pos = Point3d( -810.4, 113.2, -329.8),
-         TDir = Y_AX(),
-         ADir = X_AX(),
-         Geo = 'BASE/T111S'}
-end
-
-if AggreBlockHaus then
-   local TcpSsId = EmtTcPos {
-      Name = 'T121',
-      Parent = 'Base',
-      Pos = Point3d( 678.3, -1.963, -877.5),
-      TDir = Y_AX(),
-      ADir = -X_AX(),
-      Geo = 'BASE/T121',
-      Aux = 'BASE/T121_HS'}
+else
+   if not SpecialBH then
+      EmtTcPos {
+            Name = 'T101',
+            Parent = 'Base',
+            Pos = Point3d( -510.4, 113.2, -160.8),
+            TDir = X_AX(),
+            ADir = Z_AX(),
+            Geo = 'BASE/T101'}
+   else
+      EmtTcPos {
+            Name = 'T101',
+            Parent = 'Base',
+            Pos = Point3d( -510.4, 113.2, -1160.8),
+            TDir = X_AX(),
+            ADir = Z_AX(),
+            Geo = 'BASE/T101S'}
+   end
+   if SecondSupport == 1 then
+      -- supporto per punta
+      EmtTcPos {
+            Name = 'T111',
+            Parent = 'Base',
+            Pos = Point3d( -510.4, 113.2, -329.8),
+            TDir = Z_AX(),
+            ADir = X_AX(),
+            Geo = 'BASE/T111'}
+   elseif SecondSupport == 2 then
+      -- supporto per mortasatrice
+      local TcpSsId = EmtTcPos {
+                           Name = 'T111',
+                           Parent = 'Base',
+                           Pos = Point3d( -510.4, 113.2, -430.8),
+                           TDir = X_AX(),
+                           ADir = Z_AX(),
+                           Geo = 'BASE/T111M'}
+      EgtSetInfo( TcpSsId, 'Mortiser', true)
+   elseif SecondSupport == 3 then
+      -- supporto per rinvio angolare
+      local TcpSsId = EmtTcPos {
+                           Name = 'T91',
+                           Parent = 'Base',
+                           ExitNbr = 2,
+                           Pos1 = Point3d( -710.4-150, 113.2, -329.8-170),
+                           TDir1 = X_AX(),
+                           Pos2 = Point3d( -710.4+150, 113.2, -329.8-170),
+                           TDir2 = -X_AX(),
+                           ADir = Z_AX(),
+                           Geo = 'BASE/T91',
+                           Aux = 'BASE/T91_HS'}
+   end
+   if SpecialBH then
+      EmtTcPos {
+            Name = 'T111',
+            Parent = 'Base',
+            Pos = Point3d( -810.4, 113.2, -329.8),
+            TDir = Y_AX(),
+            ADir = X_AX(),
+            Geo = 'BASE/T111S'}
+   end
 end
 
 -- Aggiusto posizioni geometriche
@@ -596,7 +672,7 @@ end
 -- Funzione per impostare spia stato morsa carrello Y
 function SetPYLight( bClosed)
    if not PYLightId then return end
-   EgtSetColor( PYLightId, EgtIf( bClosed, 'RED', 'LIME')) 
+   EgtSetColor( PYLightId, EgtIf( bClosed, 'RED', 'LIME'))
    if bClosed then
       EgtSetInfo( PYLightId, 'On', '1')
    else
@@ -630,6 +706,52 @@ function GetPVLight()
    return ( EgtGetInfo( PVLightId, 'On') == '1')
 end
 
+---------------------------------------------------------------------
+---------------------------- Cambio Utensile ------------------------
+function GetTCSet( sTcPos)
+   -- TC 1
+   if sTcPos == 'T1' or sTcPos == 'T2' or sTcPos == 'T3' or sTcPos == 'T4' or sTcPos == 'T5' or
+      sTcPos == 'T6' or sTcPos == 'T7' or sTcPos == 'T8' or sTcPos == 'T9' or sTcPos == 'T10' or sTcPos == 'T11' then
+      return 1
+   -- TC 2
+   elseif sTcPos == 'T21' or sTcPos == 'T22' or sTcPos == 'T23' or sTcPos == 'T24' or
+          sTcPos == 'T25' or sTcPos == 'T26' or sTcPos == 'T27' or sTcPos == 'T28' then
+      return 2
+   end
+end
+
+---------------------------------------------------------------------
+-- Funzione per impostare la posizione del rinvio flottante
+function SetFloatPos( sHead, dPos)
+   -- recupero Id testa
+   local nHeadId = EgtGetHeadId( sHead)
+   if not nHeadId then return false end
+   -- se ci sono entità flottanti nel ToolHolder
+   local nRefId = EgtGetFirstNameInGroup( nHeadId, '_T1')
+   local vtTool = EgtFR( nRefId, GDB_ID.ROOT):getVersZ() 
+   local nObjId =  EgtGetFirstGroupInGroup( EgtGetFirstNameInGroup( nHeadId, 'T1'))
+   local FloatEntities = EgtGetInfoInGroup( nObjId, 'Float')
+   if FloatEntities and #FloatEntities > 0 then
+      -- il porta-utensile flottante non può comprimersi più di 10mm
+      if dPos > 10 then
+         local sErr = 'Floating Ring compressed more than 10mm'
+         EmtSetLastError( 1222, sErr)
+         EgtOutLog( 'Error : ' .. sErr, 1)
+      end
+      local dFloat = EgtGetInfo( FloatEntities[1], 'Float', 'd')
+      if abs( dPos - dFloat) > 10 * GEO.EPS_SMALL then
+         local vtMove = ( dPos - dFloat) * vtTool
+         -- sposto tutte le entità flottanti
+         for i = 1, #FloatEntities do
+            EgtMove( FloatEntities[i], vtMove, GDB_RT.GLOB)
+            EgtSetInfo( FloatEntities[i], 'Float', dPos)
+         end
+      end
+      return true
+   end
+   return false
+end
+
 ---------------------------------------------------------------------
 -- Funzione per resettare tutte le attivazioni della macchina
 function OnResetMachine()
@@ -637,6 +759,7 @@ function OnResetMachine()
    EmtUnlinkAllFixturesFromGroups()
    SetPYLight( false)
    SetPVLight( false)
+   SetFloatPos( 'H1', 0)
    -- nascondo Vmill
    local nRawId = EgtGetFirstRawPart()
    while nRawId do

Scripts/SetUp.lua

@@ -24,9 +24,7 @@ local INVALIDPOS = ""
 local POS = "Pos"
 
 -- Geom Set
-local GS = {}
-
-local bAggreBlockHaus = ( EgtGetHeadId( 'H7') ~= nil)
+local GS = {{"H1", "H7"}}
 
 -- Configurazione posizioni
 local PositionTable={{Pos = "Pos1",  TcPos = "T1",  Head = "H1", Group = "G1"},
@@ -39,23 +37,37 @@ local PositionTable={{Pos = "Pos1",  TcPos = "T1",  Head = "H1", Group = "G1"},
                      {Pos = "Pos8",  TcPos = "T8",  Head = "H1", Group = "G1"},
                      {Pos = "Pos9",  TcPos = "T9",  Head = "H1", Group = "G1"},
                      {Pos = "Pos10", TcPos = "T10", Head = "H1", Group = "G1"},
-                     {Pos = "Pos11", TcPos = EgtIf( bAggreBlockHaus, "T121", "T11"), Head = EgtIf( bAggreBlockHaus, "H7", "H1"), Group = "G1"},
+                     {Pos = "Pos11", TcPos = "T11", Head = "H1", Group = "G1"},
                      {Pos = "Pos12", TcPos = "T42", Head = "H2", Group = "G1"},
                      {Pos = "Pos13", TcPos = "T101", Head = "H3", Group = "G2"}}
-local SecSuppId = EgtGetTcPosId( 'T111')
-if SecSuppId then
-   local bMortiser = EgtGetInfo( SecSuppId, 'Mortiser', 'b')
-   if bMortiser then
-      table.insert( PositionTable, {Pos = "Pos14", TcPos = "T111", Head = "H3", Group = "G2"})
-   else
-      table.insert( PositionTable, {Pos = "Pos14", TcPos = "T111", Head = "H1", Group = "G2"})
+
+local IsTC2Active = ( EgtGetFirstNameInGroup( EgtGetBaseId( 'Base'), 'TC2') ~= nil)
+if IsTC2Active then
+   local PositionTableTC2={{Pos = "Pos14",  TcPos = "T21",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos15",  TcPos = "T22",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos16",  TcPos = "T23",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos17",  TcPos = "T24",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos18",  TcPos = "T25",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos19",  TcPos = "T26",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos20",  TcPos = "T27",  Head = "H1", Group = "G3"},
+                           {Pos = "Pos21",  TcPos = "T28",  Head = "H1", Group = "G3"}}
+   EgtJoinTables( PositionTable, PositionTableTC2)
+else
+   local SecSuppId = EgtGetTcPosId( 'T111')
+   if SecSuppId then
+      local bMortiser = EgtGetInfo( SecSuppId, 'Mortiser', 'b')
+      if bMortiser then
+         table.insert( PositionTable, {Pos = "Pos14", TcPos = "T111", Head = "H3", Group = "G2"})
+      else
+         table.insert( PositionTable, {Pos = "Pos14", TcPos = "T111", Head = "H1", Group = "G2"})
+      end
+   end
+   if EgtGetHeadId( 'H5') then
+      table.insert( PositionTable, {Pos = "Pos14", TcPos = "T91", Head = "H5", Group = "G2"})
    end
 end
-if EgtGetHeadId( 'H5') then
-   table.insert( PositionTable, {Pos = "Pos14", TcPos = "T91", Head = "H5", Group = "G2"})
-end
 
-local UsePositionHead = true
+local UsePositionHead = false
 
 local function IsInGeomSet( ToolHead, PosHead)
    for GsIndex = 1, #GS do

ToolNotes.ini

@@ -27,6 +27,7 @@
 2=d,SIDESTEP
 3=d,SIDEDEPTH
 4=s,DOUBLE
+5=dr,TOOL_OVERHANG
 
 [MILL_NOTIP]
 0=th,TH,
@@ -34,6 +35,7 @@
 2=d,SIDESTEP
 3=d,SIDEDEPTH
 4=s,DOUBLE
+5=dr,TOOL_OVERHANG
 
 [MORTISE_STD]
 0=b,MORTISE

UpdateLog.txt

@@ -1,5 +1,15 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7b1 (20/02/2024)
+- (SIM-GEN) Aggiunta possibilità di settare HCING/TCING nelle note di ogni singola lavorazione per gestire parte non pinzabile del pezzo. Funziona solo con nuovo pinzaggio.
+- (SIM-GEN) Piccola correzione calcolo posizione carrelli con nuova strategia di pinzaggio.
+- (SIM-GEN) Caricamento libreria EmtGenMachining. Si fa una require con PCALL perchè la libreria è opzionale e non è detto che ci sia. In installazione CAM5 dalla 2.7a1
+- (GEN) Per controllo TPA, modifica al numero di decimali.
+- (SIM) Aggiunta gestione per ToolHolder flottante
+
+Versione 2.7a3 (08/01/2024)
+- (GEN) Dopo separazione, in NUM_PLUS, si srive EH1 solo se macro G101, perchè altrimenti non è prevista. Ticket#2239
+
 Versione 2.7a2 (08/01/2024)
 - (MLDE-SIM) Aggiunta gestione FACOLTATIVA 'EstimationRapidMultiplier' in MLDE per regolare il tempo stimato. Se non presente in MLDE, default 1.
 - (SIM) Aggiunta gestione qualità VMILL da impostazioni macchina

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.7a2',                 -- versione script
+   VERSION = '2.7b1',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }