EgtMachKernel 2.6e5 :

- aggiunta gestione lavorazione fresatura a 5 assi.

EgtMachKernel.vcxproj

@@ -237,6 +237,8 @@ copy $(TargetPath) \EgtProg\Dll64</Command>
     <ClCompile Include="EMkDllMain.cpp" />
     <ClCompile Include="Estimator.cpp" />
     <ClCompile Include="Exit.cpp" />
+    <ClCompile Include="FiveAxisMilling.cpp" />
+    <ClCompile Include="FiveAxisMillingData.cpp" />
     <ClCompile Include="Generator.cpp" />
     <ClCompile Include="GenMachining.cpp" />
     <ClCompile Include="GenMachiningData.cpp" />
@@ -397,6 +399,8 @@ copy $(TargetPath) \EgtProg\Dll64</Command>
     <ClInclude Include="DrillingData.h" />
     <ClInclude Include="Estimator.h" />
     <ClInclude Include="Exit.h" />
+    <ClInclude Include="FiveAxisMilling.h" />
+    <ClInclude Include="FiveAxisMillingData.h" />
     <ClInclude Include="Generator.h" />
     <ClInclude Include="GenMachining.h" />
     <ClInclude Include="GenMachiningData.h" />

EgtMachKernel.vcxproj.filters

@@ -234,6 +234,12 @@
     <ClCompile Include="TcPos.cpp">
       <Filter>Source Files\Machine</Filter>
     </ClCompile>
+    <ClCompile Include="FiveAxisMillingData.cpp">
+      <Filter>Source Files\Machinings</Filter>
+    </ClCompile>
+    <ClCompile Include="FiveAxisMilling.cpp">
+      <Filter>Source Files\Operations</Filter>
+    </ClCompile>
   </ItemGroup>
   <ItemGroup>
     <ClInclude Include="DllMain.h">
@@ -668,6 +674,12 @@
     <ClInclude Include="..\Include\EGkBBox1d.h">
       <Filter>Header Files\Include</Filter>
     </ClInclude>
+    <ClInclude Include="FiveAxisMillingData.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="FiveAxisMilling.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
   </ItemGroup>
   <ItemGroup>
     <ResourceCompile Include="EgtMachKernel.rc">

FiveAxisMilling.cpp

@@ -0,0 +1,977 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2024-2024
+//----------------------------------------------------------------------------
+// File : FiveAxisMilling.cpp        Data : 22.05.24        Versione : 2.6e5
+// Contenuto : Implementazione gestione lavorazione 5 assi.
+//
+//
+//
+// Modifiche : 22.05.24 DS Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+//--------------------------- Include ----------------------------------------
+#include "stdafx.h"
+#include "MachMgr.h"
+#include "DllMain.h"
+#include "FiveAxisMilling.h"
+#include "OperationConst.h"
+#include "/EgtDev/Include/EGkCurveLine.h"
+#include "/EgtDev/Include/EGkCurveArc.h"
+#include "/EgtDev/Include/EGkCurveComposite.h"
+#include "/EgtDev/Include/EGkArcSpecial.h"
+#include "/EgtDev/Include/EGkSfrCreate.h"
+#include "/EgtDev/Include/EGkSurfTriMesh.h"
+#include "/EgtDev/Include/EGkUserObjFactory.h"
+#include "/EgtDev/Include/EGnStringKeyVal.h"
+#include "/EgtDev/Include/EgtPointerOwner.h"
+#include "/EgtDev/Include/EgtIniFile.h"
+
+using namespace std ;
+
+//------------------------------ Errors --------------------------------------
+// 2801 = "Error in FiveAxisMilling : UpdateToolData failed"
+// 2802 = "Error in FiveAxisMilling : missing Script (xxx)"
+// 2803 = "Error in FiveAxisMilling : Error in xxx (nnn)"
+// 2804 = "Error in FiveAxisMilling : axes values not calculable"
+// 2805 = "Error in FiveAxisMilling : outstroke xx"
+// 2806 = "Error in FiveAxisMilling : link movements not calculable"
+// 2807 = "Error in FiveAxisMilling : link outstroke xx"
+// 2808 = "Error in FiveAxisMilling : post apply not calculable"
+// 2809 = "Error in FiveAxisMilling : Tool loading failed"
+// 2851 = "Warning in FiveAxisMilling : Skipped entity (xx)"
+// 2852 = "Warning in FiveAxisMilling : No machinable path"
+// 2853 = "Warning in FiveAxisMilling : Tool name changed (xx)"
+// 2854 = "Warning in FiveAxisMilling : Tool data changed (xx)"
+
+//------------------------------ Constants -----------------------------------
+static const string EMC_VAR = "EMC" ;              // tabella variabili locali per calcolo
+static const string EVAR_MACHID = ".MACHID" ;      // IN (int) identificativo della lavorazione
+static const string EVAR_GEOM = ".GEOM" ;          // IN (table) tabella delle entità da lavorare
+static const string EVAR_DEPTH = ".DEPTH" ;        // IN (string) affondamento (espressione numerica)
+static const string EVAR_TINVERT = ".TOOLINVERT" ; // IN (bool) flag di inversione direzione utensile
+static const string EVAR_INVERT = ".INVERT" ;      // IN (bool) flag di inversione direzione lavorazione
+static const string EVAR_STARTPOS = ".STARTPOS" ;  // IN (num) quota di inizio lavorazione (sempre >= 0) 
+static const string EVAR_OFFSR = ".OFFSR" ;        // IN (num) offset radiale 
+static const string EVAR_OFFSL = ".OFFSL" ;        // IN (num) offset longitudinale 
+static const string EVAR_SYSNOTES = ".SYSNOTES" ;  // IN (string) note interne
+static const string EVAR_USERNOTES = ".USERNOTES" ;// IN (string) note dell'utente
+static const string EVAR_TOOL = ".TOOL" ;          // IN (string) nome dell'utensile
+static const string EVAR_HEAD = ".HEAD" ;          // IN (string) nome testa
+static const string EVAR_EXIT = ".EXIT" ;          // IN (int) indice uscita
+static const string EVAR_TTYPE = ".TTYPE" ;        // IN (int) tipo utensile
+static const string EVAR_TMAXMAT = ".TMAXMAT" ;    // IN (num) massimo materiale
+static const string EVAR_TDIAM = ".TDIAM" ;        // IN (num) diametro utensile
+static const string EVAR_TTOTDIAM = ".TTOTDIAM" ;  // IN (num) diametro totale utensile
+static const string EVAR_TLEN = ".TLEN" ;          // IN (num) lunghezza utensile
+static const string EVAR_TTOTLEN = ".TTOTLEN" ;    // IN (num) lunghezza totale utensile
+static const string EVAR_TTHICK = ".THICK" ;       // IN (num) spessore per lame o altezza taglienti
+static const string EVAR_TCORNRAD = ".TCORNRAD" ;  // IN (num) raggio corner
+static const string EVAR_TSIDEANG = ".TSIDEANG" ;  // IN (num) angolo del fianco rispetto all'asse
+static const string EVAR_FEED = ".FEED" ;          // IN (num) feed dell'utensile
+static const string EVAR_STARTFEED = ".STARTFEED" ;// IN (num) feed di inizio dell'utensile
+static const string EVAR_ENDFEED = ".ENDFEED" ;    // IN (num) feed di fine dell'utensile
+static const string EVAR_TIPFEED = ".TIPFEED" ;    // IN (num) feed di punta dell'utensile
+static const string EVAR_ISROBOT = ".ISROBOT" ;    // IN (bool) flag per indicare che la cinematica è di tipo robot
+static const string EVAR_ERROR = ".ERR" ;          // OUT (int) codice di errore ( 0 = ok)
+static const string EVAR_MILLS = ".MILLS" ;        // OUT (int) numero di percorsi di lavoro
+static const string ON_PREVIEW = "OnPreview_" ;
+static const string ON_APPLY = "OnApply_" ;
+
+//----------------------------------------------------------------------------
+USEROBJ_REGISTER( GetOperationClass( OPER_FIVEAXISMILLING), FiveAxisMilling) ;
+
+//----------------------------------------------------------------------------
+const string&
+FiveAxisMilling::GetClassName( void) const
+{
+   return USEROBJ_GETNAME( FiveAxisMilling) ;
+}
+
+//----------------------------------------------------------------------------
+FiveAxisMilling*
+FiveAxisMilling::Clone( void) const
+{
+  // alloco oggetto
+   FiveAxisMilling* pGenM = new(nothrow) FiveAxisMilling ;
+  // eseguo copia dei dati
+   if ( pGenM != nullptr) {
+      try {
+         pGenM->m_vId = m_vId ;
+         pGenM->m_pMchMgr = m_pMchMgr ;
+         pGenM->m_nPhase = m_nPhase ;
+         pGenM->m_Params = m_Params ;
+         pGenM->m_TParams = m_TParams ;
+         pGenM->m_nStatus = m_nStatus ;
+         pGenM->m_nMills = m_nMills ;
+      }
+      catch( ...) {
+         delete pGenM ;
+         return nullptr ;
+      }
+   }
+  // ritorno l'oggetto
+   return pGenM ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Dump( string& sOut, bool bMM, const char* szNewLine) const
+{
+   sOut += GetClassName() + "[mm]" + szNewLine ;
+   sOut += KEY_PHASE + EQUAL + ToString( m_nPhase) + szNewLine ;
+   sOut += KEY_IDS + EQUAL + ToString( m_vId) + szNewLine ;
+   for ( int i = 0 ; i < m_Params.GetSize() ; ++ i)
+      sOut += m_Params.ToString( i) + szNewLine ;
+   for ( int i = 0 ; i < m_TParams.GetSize() ; ++ i)
+      sOut += m_TParams.ToString( i) + szNewLine ;
+   sOut += KEY_NUM + EQUAL + ToString( m_nMills) + szNewLine ;
+   sOut += KEY_STAT + EQUAL + ToString( m_nStatus) + szNewLine ;
+
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Save( int nBaseId, STRVECTOR& vString) const
+{
+   try {
+      int nSize = 1 + m_Params.GetSize() + m_TParams.GetSize() + 3 ;
+      vString.insert( vString.begin(), nSize, "") ;
+      int k = - 1 ;
+      if ( ! SetVal( KEY_IDS, m_vId, vString[++k]))
+         return false ;
+      for ( int i = 0 ; i < m_Params.GetSize() ; ++ i)
+         vString[++k] = m_Params.ToString( i) ;
+      for ( int i = 0 ; i < m_TParams.GetSize() ; ++ i)
+         vString[++k] = m_TParams.ToString( i) ;
+      if ( ! SetVal( KEY_PHASE, m_nPhase, vString[++k]))
+         return false ;
+      if ( ! SetVal( KEY_NUM, m_nMills, vString[++k]))
+         return false ;
+      if ( ! SetVal( KEY_STAT, m_nStatus, vString[++k]))
+         return false ;
+   }
+   catch( ...) {
+      return false ;
+   }
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Load( const STRVECTOR& vString, int nBaseGdbId)
+{
+   int nSize = int( vString.size()) ;
+  // lista identificativi geometrie da lavorare
+   int k = - 1 ;
+   if ( k >= nSize - 1  ||  ! GetVal( vString[++k], KEY_IDS, m_vId))
+      return false ;
+   for ( auto& Sel : m_vId)
+      Sel.nId += nBaseGdbId ;
+  // parametri lavorazione
+   for ( int i = 0 ; i < m_Params.GetSize() ; ++ i) {
+      int nKey ;
+      if ( k >= nSize - 1  ||  ! m_Params.FromString( vString[++k], nKey)  ||  nKey != i) {
+         if ( m_Params.IsOptional( i))
+            -- k ;
+         else
+            return false ;
+      }
+   }
+  // parametri utensile
+   for ( int i = 0 ; i < m_TParams.GetSize() ; ++ i) {
+      int nKey ;
+      if ( k >= nSize - 1  ||  ! m_TParams.FromString( vString[++k], nKey)  ||  nKey != i)
+         return false ;
+   }
+  // parametri di stato
+   while ( k < nSize - 1) {
+     // separo chiave da valore
+      string sKey, sVal ;
+      SplitFirst( vString[++k], "=", sKey, sVal) ;
+     // leggo
+      if ( sKey == KEY_PHASE) {
+         if ( ! FromString( sVal, m_nPhase))
+            return false ;
+      }
+      else if ( sKey == KEY_NUM) {
+         if ( ! FromString( sVal, m_nMills))
+            return false ;
+      }
+      else if ( sKey == KEY_STAT) {
+         if ( ! FromString( sVal, m_nStatus))
+            return false ;
+      }
+   }
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+//----------------------------------------------------------------------------
+FiveAxisMilling::FiveAxisMilling( void)
+{
+   m_Params.m_sName = "*" ;
+   m_Params.m_sToolName = "*" ;
+   m_TParams.m_sName = "*" ;
+   m_TParams.m_sHead = "*" ;
+   m_nStatus = MCH_ST_TO_VERIFY ;
+   m_nMills = 0 ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Prepare( const string& sGenMchName)
+{
+  // verifico il gestore lavorazioni
+   if ( m_pMchMgr == nullptr)
+      return false ;
+  // recupero il gestore DB utensili della macchina corrente
+   ToolsMgr* pTMgr = m_pMchMgr->GetCurrToolsMgr() ;
+   if ( pTMgr == nullptr)
+      return false ;
+  // recupero il gestore DB lavorazioni della macchina corrente
+   MachiningsMgr* pMMgr = m_pMchMgr->GetCurrMachiningsMgr() ;
+   if ( pMMgr == nullptr)
+      return false ;
+  // ricerca della lavorazione di libreria con il nome indicato
+   const FiveAxisMillingData* pDdata = GetFiveAxisMillingData( pMMgr->GetMachining( sGenMchName)) ;
+   if ( pDdata == nullptr)
+      return false ;
+   m_Params = *pDdata ;
+  // ricerca dell'utensile usato dalla lavorazione
+   const ToolData* pTdata = pTMgr->GetTool( m_Params.m_ToolUuid) ;
+   if ( pTdata == nullptr)
+      return false ;
+   m_TParams = *pTdata ;
+   m_Params.m_sToolName = m_TParams.m_sName ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::SetParam( int nType, bool bVal)
+{
+   switch ( nType) {
+   case MPA_INVERT :
+      if ( bVal != m_Params.m_bInvert)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_bInvert = bVal ;
+      return true ;
+   case MPA_TOOLINVERT :
+      if ( bVal != m_Params.m_bToolInvert)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_bToolInvert = bVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::SetParam( int nType, int nVal)
+{
+   switch ( nType) {
+   case MPA_SCC :
+      if ( ! m_Params.VerifySolCh( nVal))
+         return false ;
+      if ( nVal != m_Params.m_nSolCh)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_nSolCh = nVal ;
+      return true ;
+   case MPA_SUBTYPE :
+      if ( nVal != m_Params.m_nSubType)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_nSubType = nVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::SetParam( int nType, double dVal)
+{
+   switch ( nType) {
+   case MPA_SPEED :
+      if ( ! m_TParams.VerifySpeed( dVal))
+         return false ;
+      if ( abs( m_TParams.m_dSpeed - dVal) < EPS_MACH_ANG_PAR)
+         dVal = 0 ;
+      if ( abs( dVal - m_Params.m_dSpeed) > EPS_MACH_ANG_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dSpeed = dVal ;
+      return true ;
+   case MPA_FEED :
+      if ( abs( m_TParams.m_dFeed - dVal) < EPS_MACH_LEN_PAR)
+         dVal = 0 ;
+      if ( abs( dVal - m_Params.m_dFeed) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dFeed = dVal ;
+      return true ;
+   case MPA_STARTFEED :
+      if ( abs( m_TParams.m_dStartFeed - dVal) < EPS_MACH_LEN_PAR)
+         dVal = 0 ;
+      if ( abs( dVal - m_Params.m_dStartFeed) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dStartFeed = dVal ;
+      return true ;
+   case MPA_ENDFEED :
+      if ( abs( m_TParams.m_dEndFeed - dVal) < EPS_MACH_LEN_PAR)
+         dVal = 0 ;
+      if ( abs( dVal - m_Params.m_dEndFeed) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dEndFeed = dVal ;
+      return true ;
+   case MPA_TIPFEED :
+      if ( abs( m_TParams.m_dTipFeed - dVal) < EPS_MACH_LEN_PAR)
+         dVal = 0 ;
+      if ( abs( dVal - m_Params.m_dTipFeed) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dTipFeed = dVal ;
+      return true ;
+   case MPA_OFFSR :
+      if ( abs( m_TParams.m_dOffsR - dVal) < EPS_MACH_LEN_PAR)
+         dVal = UNKNOWN_PAR ;
+      if ( abs( dVal - m_Params.m_dOffsR) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dOffsR = dVal ;
+      return true ;
+   case MPA_OFFSL :
+      if ( abs( m_TParams.m_dOffsL - dVal) < EPS_MACH_LEN_PAR)
+         dVal = UNKNOWN_PAR ;
+      if ( abs( dVal - m_Params.m_dOffsL) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dOffsL = dVal ;
+      return true ;
+   case MPA_DEPTH: {
+      string sVal = ToString( dVal) ;
+      if ( sVal != m_Params.m_sDepth)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sDepth = sVal ;
+      } return true ;
+   case MPA_STARTPOS :
+      if ( abs( dVal - m_Params.m_dStartPos) > EPS_MACH_LEN_PAR)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_dStartPos = dVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::SetParam( int nType, const string& sVal)
+{
+   switch ( nType) {
+   case MPA_TOOL : {
+      const ToolData* pTdata ;
+      if ( ! m_Params.VerifyTool( m_pMchMgr->GetCurrToolsMgr(), sVal, pTdata))
+         return false ;
+      if ( ! SameTool( m_TParams, *pTdata))
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sToolName = sVal ;
+      m_Params.m_ToolUuid = pTdata->m_Uuid ;
+      m_TParams = *pTdata ;
+      } return true ;
+   case MPA_DEPTH_STR :
+      if ( sVal != m_Params.m_sDepth)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sDepth = sVal ;
+      return true ;
+   case MPA_SYSNOTES :
+      if ( sVal != m_Params.m_sSysNotes)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sSysNotes = sVal ;
+      return true ;
+   case MPA_USERNOTES :
+      if ( sVal != m_Params.m_sUserNotes)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sUserNotes = sVal ;
+      return true ;
+   case MPA_INITANGS :
+      if ( sVal != m_Params.m_sInitAngs)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sInitAngs = sVal ;
+      return true ;
+   case MPA_BLOCKEDAXIS :
+      if ( sVal != m_Params.m_sBlockedAxis)
+         m_nStatus |= MCH_ST_PARAM_MODIF ;
+      m_Params.m_sBlockedAxis = sVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::SetGeometry( const SELVECTOR& vIds)
+{
+  // verifico validità gestore DB geometrico
+   if ( m_pGeomDB == nullptr)
+      return false ;
+  // reset della geometria corrente
+   m_vId.clear() ;
+  // verifico che gli identificativi rappresentino delle entità ammissibili (tutte curve o tutte facce)
+   int nType = GEO_NONE ;
+   for ( const auto& Id : vIds) {
+     // test sull'entità
+      int nSubs ;
+      if ( ! VerifyGeometry( Id, nSubs, nType)) {
+         string sInfo = "Warning in FiveAxisMilling : Skipped entity " + ToString( Id) ;
+         m_pMchMgr->SetWarning( 2851, sInfo) ;
+         continue ;
+      }
+     // posso aggiungere alla lista
+      m_vId.emplace_back( Id) ;
+   }
+  // aggiorno lo stato
+   m_nStatus |= MCH_ST_GEO_MODIF ;
+  // restituisco presenza geometria da lavorare
+   return ( ! m_vId.empty()  ||  vIds.empty()) ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Preview( bool bRecalc)
+{
+  // reset numero percorsi di lavoro generati
+   m_nMills = 0 ;
+
+  // verifico validità gestore DB geometrico e Id del gruppo
+   if ( m_pGeomDB == nullptr  ||  ! m_pGeomDB->ExistsObj( m_nOwnerId))
+      return false ;
+
+  // aggiorno dati geometrici dell'utensile
+   if ( ! UpdateToolData()) {
+      m_pMchMgr->SetLastError( 2801, "Error in FiveAxisMilling : UpdateToolData failed") ;
+      return false ;
+   }
+
+  // rendo corrente l'utensile usato nella lavorazione
+   if ( ! m_pMchMgr->SetCalcTool( m_TParams.m_sName, m_TParams.m_sHead, m_TParams.m_nExit)) {
+      m_pMchMgr->SetLastError( 2809, "Error in FiveAxisMilling : Tool loading failed") ;
+      return false ;
+   }
+
+  // recupero gruppo per geometria di Preview
+   int nPvId = m_pGeomDB->GetFirstNameInGroup( m_nOwnerId, MCH_PV) ;
+  // se non c'è, lo aggiungo
+   if ( nPvId == GDB_ID_NULL) {
+      nPvId = m_pGeomDB->AddGroup( GDB_ID_NULL, m_nOwnerId, Frame3d()) ;
+      if ( nPvId == GDB_ID_NULL)
+         return false ;
+      m_pGeomDB->SetName( nPvId, MCH_PV) ;
+   }
+  // altrimenti lo svuoto
+   else
+      m_pGeomDB->EmptyGroup( nPvId) ;
+
+  // recupero la macchina corrente
+   Machine* pMch = m_pMchMgr->GetCurrMachine() ;
+   if ( pMch == nullptr)
+      return false ;
+
+  // nome della funzione lua da Ini della macchina
+   string sMachIni = pMch->GetMachineDir() + "\\" + pMch->GetMachineName() + ".ini" ;
+   string sKey = FIVEAXISMILLING_SCRIPT_KEY + ToString( m_Params.m_nSubType) ;
+   string sName = GetPrivateProfileStringUtf8( FIVEAXISMILLING_SEC.c_str(), sKey.c_str(), "", sMachIni.c_str()) ;
+   string sPreview = ON_PREVIEW + sName ;
+
+  // verifico esistenza funzione
+   if ( ! pMch->LuaExistsFunction( sPreview)) {
+      string sErr = "Error in FiveAxisMilling : missing Script " + sPreview ;
+      m_pMchMgr->SetLastError( 2802, sErr) ;
+      return false ;
+   }
+
+  // imposto stato
+   bool bOk = true ;
+   int nErr = 99 ;
+  // imposto valori parametri
+   bOk = bOk && pMch->LuaCreateGlobTable( EMC_VAR) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_MACHID, m_nOwnerId) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_GEOM, m_vId) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_DEPTH, m_Params.m_sDepth) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TINVERT, m_Params.m_bToolInvert) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_INVERT, m_Params.m_bInvert) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_STARTPOS, m_Params.m_dStartPos) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_OFFSR, GetOffsR()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_OFFSL, GetOffsL()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_SYSNOTES, m_Params.m_sSysNotes) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_USERNOTES, m_Params.m_sUserNotes) ;  
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TOOL, m_TParams.m_sName) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_HEAD, m_TParams.m_sHead) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_EXIT, m_TParams.m_nExit) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTYPE, m_TParams.m_nType) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TMAXMAT, m_TParams.m_dMaxMat) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TDIAM, m_TParams.m_dDiam) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTOTDIAM, m_TParams.m_dTDiam) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TLEN, m_TParams.m_dLen) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTOTLEN, m_TParams.m_dTLen) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTHICK, m_TParams.m_dThick) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TCORNRAD, m_TParams.m_dCornRad) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TSIDEANG, m_TParams.m_dSideAng) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_FEED, GetFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_STARTFEED, GetStartFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_ENDFEED, GetEndFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TIPFEED, GetTipFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_ISROBOT, m_pMchMgr->GetCurrIsRobot()) ;
+  // eseguo
+   bOk = bOk && pMch->LuaCallFunction( sPreview, false) ;
+  // recupero valori parametri obbligatori
+   bOk = bOk && pMch->LuaGetGlobVar( EMC_VAR + EVAR_ERROR, nErr) ;
+   bOk = bOk && pMch->LuaGetGlobVar( EMC_VAR + EVAR_MILLS, m_nMills) ;
+  // reset
+   bOk = bOk && pMch->LuaResetGlobVar( EMC_VAR) ;
+  // segnalo errori
+   if ( ! bOk  ||  nErr != 0) {
+      m_nMills = 0 ;
+      string sErr = "Error in FiveAxisMilling : Error in " + sPreview + " (" + ToString( nErr) + ")" ;
+      m_pMchMgr->SetLastError( 2803, sErr) ;
+      return false ;
+   }
+
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Apply( bool bRecalc, bool bPostApply)
+{
+  // reset numero percorsi di lavoro generati
+   int nCurrMills = m_nMills ;
+   m_nMills = 0 ;
+
+  // verifico validità gestore DB geometrico e Id del gruppo
+   if ( m_pGeomDB == nullptr  ||  ! m_pGeomDB->ExistsObj( m_nOwnerId))
+      return false ;
+
+  // aggiorno dati geometrici dell'utensile
+   bool bToolChanged = true ;
+   if ( ! UpdateToolData( &bToolChanged)) {
+      m_pMchMgr->SetLastError( 2801, "Error in FiveAxisMilling : UpdateToolData failed") ;
+      return false ;
+   }
+
+  // verifico se necessario continuare nell'aggiornamento
+   if ( ! bRecalc  &&  ! bToolChanged  &&  
+        ( m_nStatus == MCH_ST_OK  ||  ( ! bPostApply  &&  m_nStatus == MCH_ST_NO_POSTAPPL))) {
+     // confermo i percorsi di lavorazione
+      m_nMills = nCurrMills ;
+      LOG_DBG_INFO( GetEMkLogger(), "FiveAxisMilling apply skipped : status already ok") ;
+     // eseguo aggiornamento assi macchina e collegamento con operazione precedente
+      if ( ! Update( bPostApply))
+         return false ;
+      LOG_DBG_INFO( GetEMkLogger(), "Update done") ;
+     // esco con successo
+      return true ;
+   }
+   m_nStatus = MCH_ST_TO_VERIFY ;
+
+  // rendo corrente l'utensile usato nella lavorazione
+   if ( ! m_pMchMgr->SetCalcTool( m_TParams.m_sName, m_TParams.m_sHead, m_TParams.m_nExit)) {
+      m_pMchMgr->SetLastError( 2809, "Error in FiveAxisMilling : Tool loading failed") ;
+      return false ;
+   }
+
+  // recupero gruppo per geometria di lavorazione (Cutter Location)
+   int nClId = m_pGeomDB->GetFirstNameInGroup( m_nOwnerId, MCH_CL) ;
+  // se non c'è, lo aggiungo
+   if ( nClId == GDB_ID_NULL) {
+      nClId = m_pGeomDB->AddGroup( GDB_ID_NULL, m_nOwnerId, Frame3d()) ;
+      if ( nClId == GDB_ID_NULL)
+         return false ;
+      m_pGeomDB->SetName( nClId, MCH_CL) ;
+   }
+  // altrimenti lo svuoto
+   else
+      m_pGeomDB->EmptyGroup( nClId) ;
+
+  // recupero la macchina corrente
+   Machine* pMch = m_pMchMgr->GetCurrMachine() ;
+   if ( pMch == nullptr)
+      return false ;
+
+  // nome della funzione lua da Ini della macchina
+   string sMachIni = pMch->GetMachineDir() + "\\" + pMch->GetMachineName() + ".ini" ;
+   string sKey = FIVEAXISMILLING_SCRIPT_KEY + ToString( m_Params.m_nSubType) ;
+   string sName = GetPrivateProfileStringUtf8( FIVEAXISMILLING_SEC.c_str(), sKey.c_str(), "", sMachIni.c_str()) ;
+   string sApply = ON_APPLY + sName ;
+
+  // verifico esistenza funzione
+   if ( ! pMch->LuaExistsFunction( sApply)) {
+      string sErr = "Error in FiveAxisMilling : missing Script " + sApply ;
+      m_pMchMgr->SetLastError( 2802, sErr) ;
+      return false ;
+   }
+
+  // imposto stato
+   bool bOk = true ;
+   int nErr = 99 ;
+  // imposto valori parametri
+   bOk = bOk && pMch->LuaCreateGlobTable( EMC_VAR) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_MACHID, m_nOwnerId) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_GEOM, m_vId) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_DEPTH, m_Params.m_sDepth) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TINVERT, m_Params.m_bToolInvert) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_INVERT, m_Params.m_bInvert) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_STARTPOS, m_Params.m_dStartPos) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_OFFSR, GetOffsR()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_OFFSL, GetOffsL()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_SYSNOTES, m_Params.m_sSysNotes) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_USERNOTES, m_Params.m_sUserNotes) ;  
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TOOL, m_TParams.m_sName) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_HEAD, m_TParams.m_sHead) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_EXIT, m_TParams.m_nExit) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTYPE, m_TParams.m_nType) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TMAXMAT, m_TParams.m_dMaxMat) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TDIAM, m_TParams.m_dDiam) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTOTDIAM, m_TParams.m_dTDiam) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TLEN, m_TParams.m_dLen) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTOTLEN, m_TParams.m_dTLen) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TTHICK, m_TParams.m_dThick) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TCORNRAD, m_TParams.m_dCornRad) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TSIDEANG, m_TParams.m_dSideAng) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_FEED, GetFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_STARTFEED, GetStartFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_ENDFEED, GetEndFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_TIPFEED, GetTipFeed()) ;
+   bOk = bOk && pMch->LuaSetGlobVar( EMC_VAR + EVAR_ISROBOT, m_pMchMgr->GetCurrIsRobot()) ;
+  // eseguo
+   bOk = bOk && pMch->LuaCallFunction( sApply, false) ;
+  // recupero valori parametri obbligatori
+   bOk = bOk && pMch->LuaGetGlobVar( EMC_VAR + EVAR_ERROR, nErr) ;
+   bOk = bOk && pMch->LuaGetGlobVar( EMC_VAR + EVAR_MILLS, m_nMills) ;
+  // reset
+   bOk = bOk && pMch->LuaResetGlobVar( EMC_VAR) ;
+  // segnalo errori
+   if ( ! bOk  ||  nErr != 0) {
+      m_nMills = 0 ;
+      string sErr = "Error in FiveAxisMilling : Error in " + sApply + " (" + ToString( nErr) + ")" ;
+      m_pMchMgr->SetLastError( 2803, sErr) ;
+      return false ;
+   }
+
+  // assegno ingombri dei vari percorsi di lavorazione e della lavorazione nel suo complesso
+   CalcAndSetBBox( nClId) ;
+
+  // eseguo aggiornamento assi macchina e collegamento con operazione precedente
+   if ( ! Update( bPostApply))
+      return false ;
+  
+  // aggiorno stato della lavorazione
+   m_nStatus = ( bPostApply ? MCH_ST_OK : MCH_ST_NO_POSTAPPL) ;
+  // dichiaro successiva da aggiornare
+   UpdateFollowingOperationsStatus( MCH_ST_OTH_MODIF) ;
+
+   LOG_DBG_INFO( GetEMkLogger(), "FiveAxisMilling apply done") ;
+
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::Update( bool bPostApply)
+{
+  // verifico validità gestore DB geometrico e Id del gruppo
+   if ( m_pGeomDB == nullptr  ||  ! m_pGeomDB->ExistsObj( m_nOwnerId))
+      return false ;
+
+  // se lavorazione vuota, esco
+   if ( m_nMills == 0) {
+      m_pMchMgr->SetWarning( 2852, "Warning in FiveAxisMilling : No machinable path") ;
+      return true ;
+   }
+
+  // elimino le entità CLIMB, RISE e HOME della lavorazione, potrebbero falsare i calcoli degli assi (in ogni casi vengono riaggiunte dopo) 
+   RemoveClimbRiseHome() ;
+
+  // imposto eventuale asse bloccato da lavorazione
+   SetBlockedRotAxis( m_Params.m_sBlockedAxis) ;
+
+  // calcolo gli assi macchina
+   string sHint = ExtractHint( m_Params.m_sUserNotes) ;
+   if ( ! m_Params.m_sInitAngs.empty())
+      sHint = m_Params.m_sInitAngs ;
+   if ( ! CalculateAxesValues( sHint)) {
+      string sInfo = m_pMchMgr->GetOutstrokeInfo() ;
+      if ( sInfo.empty())
+         m_pMchMgr->SetLastError( 2804, "Error in FiveAxisMilling : axes values not calculable") ;
+      else
+         m_pMchMgr->SetLastError( 2805, "Error in FiveAxisMilling : outstroke ") ;
+      return false ;
+   }
+
+  // gestione movimenti all'inizio di ogni singolo percorso di lavorazione e alla fine della lavorazione
+   bool bVpl ;
+   if ( ! FromString( ExtractInfo( m_Params.m_sUserNotes, "Vpl:"), bVpl))
+      bVpl = true ;
+   if ( ! AdjustStartEndMovements( bVpl)) {
+      string sInfo = m_pMchMgr->GetOutstrokeInfo() ;
+      if ( sInfo.empty())
+         m_pMchMgr->SetLastError( 2806, "Error in FiveAxisMilling : link movements not calculable") ;
+      else
+         m_pMchMgr->SetLastError( 2807, "Error in FiveAxisMilling : link outstroke ") ;
+      return false ;
+   }
+
+  // assegno estremi degli assi dei vari percorsi di lavorazione e della lavorazione nel suo complesso
+   CalcAndSetAxesBBox() ;
+
+  // esecuzione eventuali personalizzazioni
+   string sErr ;
+   if ( bPostApply  &&  ! PostApply( sErr)) {
+      if ( ! IsEmptyOrSpaces( sErr))
+         m_pMchMgr->SetLastError( 2808, sErr) ;
+      else
+         m_pMchMgr->SetLastError( 2808, "Error in FiveAxisMilling : post apply not calculable") ;
+      return false ;
+   }
+
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::GetParam( int nType, bool& bVal) const
+{
+   switch ( nType) {
+   case MPA_INVERT :
+      bVal = m_Params.m_bInvert ;
+      return true ;
+   case MPA_TOOLINVERT :
+      bVal = m_Params.m_bToolInvert ;
+      return true ;
+   }
+   bVal = false ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::GetParam( int nType, int& nVal) const
+{
+   switch ( nType) {
+   case MPA_TYPE :
+      nVal = MT_GENMACHINING ;
+      return true ;
+   case MPA_SCC :
+      nVal = m_Params.m_nSolCh ;
+      return true ;
+   case MPA_SUBTYPE :
+      nVal = m_Params.m_nSubType ;
+      return true ;
+   }
+   nVal = 0 ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::GetParam( int nType, double& dVal) const
+{
+   switch ( nType) {
+   case MPA_SPEED :
+      dVal = GetSpeed() ;
+      return true ;
+   case MPA_FEED :
+      dVal = GetFeed() ;
+      return true ;
+   case MPA_STARTFEED :
+      dVal = GetStartFeed() ;
+      return true ;
+   case MPA_ENDFEED :
+      dVal = GetEndFeed() ;
+      return true ;
+   case MPA_TIPFEED :
+      dVal = GetTipFeed() ;
+      return true ;
+   case MPA_OFFSR :
+      dVal = GetOffsR() ;
+      return true ;
+   case MPA_OFFSL :
+      dVal = GetOffsL() ;
+      return true ;
+   case MPA_STARTPOS :
+      dVal = m_Params.m_dStartPos ;
+      return true ;
+   }
+   dVal = 0 ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::GetParam( int nType, string& sVal) const
+{
+   switch ( nType) {
+   case MPA_NAME :
+      sVal = m_Params.m_sName ;
+      return true ;
+   case MPA_TOOL :
+      sVal = m_Params.m_sToolName ;
+      return true ;
+   case MPA_DEPTH_STR :
+      sVal = m_Params.m_sDepth ;
+      return true ;
+   case MPA_TUUID :
+      sVal = ToString( m_Params.m_ToolUuid) ;
+      return true ;
+   case MPA_UUID :
+      sVal = ToString( m_Params.m_Uuid) ;
+      return true ;
+   case MPA_SYSNOTES :
+      sVal = m_Params.m_sSysNotes ;
+      return true ;
+   case MPA_USERNOTES :
+      sVal = m_Params.m_sUserNotes ;
+      return true ;
+   case MPA_INITANGS :
+      sVal = m_Params.m_sInitAngs ;
+      return true ;
+   case MPA_BLOCKEDAXIS :
+      sVal = m_Params.m_sBlockedAxis ;
+      return true ;
+   }
+   sVal = "" ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+const ToolData&
+FiveAxisMilling::GetToolData( void) const
+{
+   return m_TParams ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::UpdateToolData( bool* pbChanged)
+{
+  // recupero il gestore DB utensili della macchina corrente
+   ToolsMgr* pTMgr = m_pMchMgr->GetCurrToolsMgr() ;
+   if ( pTMgr == nullptr)
+      return false ;
+  // recupero l'utensile nel DB utensili
+   const ToolData* pTdata = pTMgr->GetTool( m_Params.m_ToolUuid) ;
+   if ( pTdata == nullptr)
+      return false ;
+  // salvo posizione TC, testa e uscita originali
+   string sOrigTcPos = m_TParams.m_sTcPos ;
+   string sOrigHead = m_TParams.m_sHead ;
+   int nOrigExit = m_TParams.m_nExit ;
+  // verifico se sono diversi (ad esclusione di nome, posizione TC, testa e uscita)
+   bool bChanged = ( ! SameTool( m_TParams, *pTdata, false)) ;
+  // aggiorno comunque i parametri
+   m_TParams = *pTdata ;
+  // se definito attrezzaggio, aggiorno i parametri che ne possono derivare
+   string sTcPos ; string sHead ; int nExit ;
+   if ( m_pMchMgr->GetCurrSetupMgr().GetToolData( m_TParams.m_sName, sTcPos, sHead, nExit)) {
+      if ( sOrigTcPos != sTcPos  ||
+           sOrigHead  != sHead  ||
+           nOrigExit != nExit)
+         bChanged = true ;
+      m_TParams.m_sTcPos = sTcPos ;
+      m_TParams.m_sHead = sHead ;
+      m_TParams.m_nExit = nExit ;
+   }
+   else {
+      if ( sOrigTcPos != pTdata->m_sTcPos  ||
+           sOrigHead  != pTdata->m_sHead  ||
+           nOrigExit  != pTdata->m_nExit)
+         bChanged = true ;
+   }
+  // eventuali segnalazioni
+   if ( ! EqualNoCase( m_Params.m_sToolName, m_TParams.m_sName)) {
+      string sInfo = "Warning in FiveAxisMilling : tool name changed (" +
+                     m_Params.m_sToolName + "->" + m_TParams.m_sName + ")" ;
+      m_pMchMgr->SetWarning( 2853, sInfo) ;
+      m_Params.m_sToolName = m_TParams.m_sName ;
+   }
+   if ( bChanged) {
+      string sInfo = "Warning in FiveAxisMilling : tool data changed (" +
+                     m_Params.m_sToolName + ")" ;
+      m_pMchMgr->SetWarning( 2854, sInfo) ;
+   }
+  // se definito parametro di ritorno, lo assegno
+   if ( pbChanged != nullptr)
+      *pbChanged = bChanged ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::GetGeometry( SELVECTOR& vIds) const
+{
+  // restituisco l'elenco delle entità
+   vIds = m_vId ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMilling::VerifyGeometry( SelData Id, int& nSubs, int& nType)
+{
+  // ammessi : tutte curve o tutte facce di trimesh
+   const IGeoObj* pGObj = m_pGeomDB->GetGeoObj( Id.nId) ;
+   if ( pGObj == nullptr)
+      return false ;
+  // se ammesse curve ed è tale
+   if ( nType != GEO_SURF  &&  ( pGObj->GetType() & GEO_CURVE) != 0) {
+      const ICurve* pCurve = nullptr ;
+      // se direttamente la curva
+      if ( Id.nSub == SEL_SUB_ALL) {
+         pCurve = ::GetCurve( pGObj) ;
+         if ( pCurve != nullptr) {
+            if ( pCurve->GetType() == CRV_COMPO)
+               nSubs = ::GetCurveComposite( pCurve)->GetCurveCount() ;
+            else
+               nSubs = 0 ;
+         }
+      }
+      // altrimenti sottocurva di composita
+      else {
+         const ICurveComposite* pCompo = GetCurveComposite( pGObj) ;
+         if ( pCompo != nullptr)
+            pCurve = pCompo->GetCurve( Id.nSub) ;
+         nSubs = 0 ;
+      }
+      return ( pCurve != nullptr) ;
+   }
+  // se altrimenti ammesse superfici trimesh ed è tale
+   else if ( nType != GEO_CURVE  &&  ( pGObj->GetType() & GEO_SURF) != 0) {
+      const ISurfTriMesh* pSurf = ::GetSurfTriMesh( pGObj) ;
+      if ( pSurf == nullptr)
+         return false ;
+      // se direttamente la superficie
+      if ( Id.nSub == SEL_SUB_ALL) {
+         nSubs = pSurf->GetFacetCount() ;
+         return true ;
+      }
+      // altrimenti faccia di superficie trimesh
+      else {
+        // se faccia non esistente
+         if ( Id.nSub > pSurf->GetFacetCount())
+            return false ;
+        // tutto bene
+         nSubs = 0 ;
+         return true ;
+      }
+   }
+  // altrimenti errore
+   else
+      return false ;
+}
+
+//----------------------------------------------------------------------------
+double
+FiveAxisMilling::GetApproxLinTol( void) const
+{
+   double dLinTol ;
+   if ( GetValInNotes( m_Params.m_sUserNotes, "LinTol", dLinTol))
+      return dLinTol ;
+   else
+      return Operation::GetApproxLinTol() ;
+}

FiveAxisMilling.h

@@ -0,0 +1,94 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2024-2024
+//----------------------------------------------------------------------------
+// File : FiveAxisMilling.h         Data : 22.05.24         Versione : 2.6e5
+// Contenuto : Dichiarazione della classe FiveAxisMilling.
+//
+//
+//
+// Modifiche : 22.05.24 DS Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+#pragma once
+
+#include "Machining.h"
+#include "FiveAxisMillingData.h"
+#include "ToolData.h"
+
+class ICurve ;
+class ICurveComposite ;
+
+//----------------------------------------------------------------------------
+class FiveAxisMilling : public Machining
+{
+   public :                           // IUserObj
+      FiveAxisMilling* Clone( void) const override ;
+      const std::string& GetClassName( void) const override ;
+      bool Dump( std::string& sOut, bool bMM = true, const char* szNewLine = "\n") const override ;
+      bool ToSave( void) const override
+              { return true ; }
+      bool Save( int nBaseId, STRVECTOR& vString) const override ;
+      bool Load( const STRVECTOR& vString, int nBaseGdbId) override ;
+
+   public :                           // Operation
+      int  GetType( void) const override
+              { return OPER_FIVEAXISMILLING ; }
+      bool IsEmpty( void) const override
+              { return ( m_nMills == 0) ; }
+      bool UpdateStatus( int nModif) override
+              { m_nStatus |= nModif ; return true ; }
+
+   protected :                        // Operation
+      int  GetSolCh( void) const override
+              { return m_Params.m_nSolCh ; }
+
+   public :                           // Machining
+      bool Prepare( const std::string& sMillName) override ;
+      bool SetParam( int nType, bool bVal) override ;
+      bool SetParam( int nType, int nVal) override ;
+      bool SetParam( int nType, double dVal) override ;
+      bool SetParam( int nType, const std::string& sVal) override ;
+      bool SetGeometry( const SELVECTOR& vIds) override ;
+      bool Preview( bool bRecalc) override ;
+      bool Apply( bool bRecalc, bool bPostApply) override ;
+      bool Update( bool bPostApply) override ;
+      bool GetParam( int nType, bool& bVal) const override ;
+      bool GetParam( int nType, int& nVal) const override ;
+      bool GetParam( int nType, double& dVal) const override ;
+      bool GetParam( int nType, std::string& sVal) const override ;
+      bool UpdateToolData( bool* pbChanged = nullptr) override ;
+      const ToolData& GetToolData( void) const override ;
+      bool GetGeometry( SELVECTOR& vIds) const override ;
+
+   public :
+      FiveAxisMilling( void) ;
+
+   private :
+      bool VerifyGeometry( SelData Id, int& nSubs, int& nType) ;
+      double GetApproxLinTol( void) const override ;
+
+   private :
+      double GetSpeed() const
+         { return ( IsNullAngValue( m_Params.m_dSpeed) ? m_TParams.m_dSpeed : m_Params.m_dSpeed) ; }
+      double GetFeed() const
+         { return ( IsNullLenValue( m_Params.m_dFeed) ? m_TParams.m_dFeed : m_Params.m_dFeed) ; }
+      double GetStartFeed() const
+         { return ( IsNullLenValue( m_Params.m_dStartFeed) ? m_TParams.m_dStartFeed : m_Params.m_dStartFeed) ; }
+      double GetEndFeed() const
+         { return ( IsNullLenValue( m_Params.m_dEndFeed) ? m_TParams.m_dEndFeed : m_Params.m_dEndFeed) ; }
+      double GetTipFeed() const
+         { return ( IsNullLenValue( m_Params.m_dTipFeed) ? m_TParams.m_dTipFeed : m_Params.m_dTipFeed) ; }
+      double GetOffsL() const
+         { return ( IsUnknownValue( m_Params.m_dOffsL) ? m_TParams.m_dOffsL : m_Params.m_dOffsL) ; }
+      double GetOffsR() const
+         { return ( IsUnknownValue( m_Params.m_dOffsR) ? m_TParams.m_dOffsR : m_Params.m_dOffsR) ; }
+
+   private :
+      SELVECTOR            m_vId ;             // identificativi entità geometriche da lavorare
+      FiveAxisMillingData  m_Params ;          // parametri lavorazione
+      ToolData             m_TParams ;         // parametri utensile
+      int                  m_nStatus ;         // stato di aggiornamento della lavorazione
+      int                  m_nMills ;          // numero di percorsi di lavoro generati
+} ;

FiveAxisMillingData.cpp

@@ -0,0 +1,557 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2024-2024
+//----------------------------------------------------------------------------
+// File : FiveAxisMillingData.cpp     Data : 22.05.24        Versione : 2.6e5
+// Contenuto : Implementazione struttura dati fresatura a 5 assi.
+//
+//
+//
+// Modifiche : 22.05.24 DS Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+//--------------------------- Include ----------------------------------------
+#include "stdafx.h"
+#include "FiveAxisMillingData.h"
+#include "MachiningDataFactory.h"
+#include "MachiningConst.h"
+#include "/EgtDev/Include/EmkToolConst.h"
+#include "/EgtDev/Include/EmkSimuGenConst.h"
+#include "/EgtDev/Include/EGnStringUtils.h"
+#include <array>
+#include <cassert>
+
+using namespace std ;
+
+//----------------------------------------------------------------------------
+enum nFiveAxisMillingKey {
+   KEY_AB = 0,
+   KEY_AI,
+   KEY_DH,
+   KEY_F,
+   KEY_FE,
+   KEY_FS,
+   KEY_FT,
+   KEY_INV,
+   KEY_NAME,
+   KEY_NNS,
+   KEY_NNU,
+   KEY_OL,
+   KEY_OR,
+   KEY_PS,
+   KEY_S,
+   KEY_SCC,
+   KEY_SUBTYPE,
+   KEY_TI,
+   KEY_TNAME,
+   KEY_TUUID,
+   KEY_UUID,
+   KEY_ZZZ} ;        // rappresenta il numero di elementi
+
+static const array<string,KEY_ZZZ> sFiveAxisMillingKey = {
+   "AB",
+   "AI",
+   "DH",
+   "F",
+   "FE",
+   "FS",
+   "FT",
+   "INV",
+   "NAME",
+   "NNS",
+   "NNU",
+   "OL",
+   "OR",
+   "PS",
+   "S",
+   "SCC",
+   "SUB",
+   "TI",
+   "TN",
+   "TU",
+   "UUID"} ;
+
+//----------------------------------------------------------------------------
+MCHDATA_REGISTER( MT_FIVEAXISMILLING, "FIVEAXISMILLING", FiveAxisMillingData) ;
+
+//----------------------------------------------------------------------------
+FiveAxisMillingData*
+FiveAxisMillingData::Clone( void) const
+{
+  // alloco oggetto
+   FiveAxisMillingData* pDdata = new(nothrow) FiveAxisMillingData ;
+  // copio i dati
+   if ( pDdata != nullptr) {
+      if ( ! pDdata->CopyFrom( this)) {
+         delete pDdata ;
+         return nullptr ;
+      }
+   }
+   return pDdata ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::CopyFrom( const MachiningData* pMdata)
+{
+  // è inutile copiare se sorgente coincide con destinazione
+   if ( pMdata == this)
+      return true ;
+  // la sorgente deve essere dello stesso tipo
+   const FiveAxisMillingData* pFdata = GetFiveAxisMillingData( pMdata) ;
+   if ( pFdata == nullptr)
+      return false ;
+  // eseguo copia
+   m_Uuid = pFdata->m_Uuid ;
+   m_sName = pFdata->m_sName ;
+   m_ToolUuid = pFdata->m_ToolUuid ;
+   m_sToolName = pFdata->m_sToolName ;
+   m_sBlockedAxis = pFdata->m_sBlockedAxis ;
+   m_sInitAngs = pFdata->m_sInitAngs ;
+   m_nSolCh = pFdata->m_nSolCh ;
+   m_dSpeed = pFdata->m_dSpeed ;
+   m_dFeed = pFdata->m_dFeed ;
+   m_dEndFeed = pFdata->m_dEndFeed ;
+   m_dStartFeed = pFdata->m_dStartFeed ;
+   m_dTipFeed = pFdata->m_dTipFeed ;
+   m_dOffsL = pFdata->m_dOffsL ;
+   m_dOffsR = pFdata->m_dOffsR ;
+   m_bToolInvert = pFdata->m_bToolInvert ;
+   m_bInvert = pFdata->m_bInvert ;
+   m_sDepth = pFdata->m_sDepth ;
+   m_dStartPos = pFdata->m_dStartPos ;
+   m_nSubType = pFdata->m_nSubType ;
+   m_sSysNotes = pFdata->m_sSysNotes ;
+   m_sUserNotes = pFdata->m_sUserNotes ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::SameAs(const MachiningData* pMdata) const
+{
+  // se coincide con altro -> uguali
+   if ( pMdata == this)
+      return true ;
+  // se sono di tipo diverso -> diversi
+   const FiveAxisMillingData* pFdata = GetFiveAxisMillingData( pMdata) ;
+   if ( pFdata == nullptr)
+      return false ;
+  // confronto termine a termine
+   return ( m_Uuid == pFdata->m_Uuid  &&
+            m_sName == pFdata->m_sName  &&
+            m_ToolUuid == pFdata->m_ToolUuid  &&
+            m_sToolName == pFdata->m_sToolName  &&
+            m_sBlockedAxis == pFdata->m_sBlockedAxis  &&
+            m_sInitAngs == pFdata->m_sInitAngs  &&
+            m_nSolCh == pFdata->m_nSolCh  &&
+            abs( m_dSpeed - pFdata->m_dSpeed) < EPS_MACH_ANG_PAR  &&
+            abs( m_dFeed - pFdata->m_dFeed) < EPS_MACH_LEN_PAR  &&
+            abs( m_dEndFeed - pFdata->m_dEndFeed) < EPS_MACH_LEN_PAR  &&
+            abs( m_dStartFeed - pFdata->m_dStartFeed) < EPS_MACH_LEN_PAR  &&
+            abs( m_dTipFeed - pFdata->m_dTipFeed) < EPS_MACH_LEN_PAR  &&
+            abs( m_dOffsL - pFdata->m_dOffsL) < EPS_MACH_LEN_PAR  &&
+            abs( m_dOffsR - pFdata->m_dOffsR) < EPS_MACH_LEN_PAR  &&
+            m_bToolInvert == pFdata->m_bToolInvert  &&
+            m_bInvert == pFdata->m_bInvert  &&
+            m_sDepth == pFdata->m_sDepth  &&
+            abs( m_dStartPos - pFdata->m_dStartPos) < EPS_MACH_LEN_PAR  &&
+            m_nSubType == pFdata->m_nSubType  &&
+            m_sSysNotes == pFdata->m_sSysNotes  &&
+            m_sUserNotes == pFdata->m_sUserNotes) ;
+}
+
+//----------------------------------------------------------------------------
+int
+FiveAxisMillingData::GetSize( void) const
+{
+  // in debug verifico validità ultimo campo
+   assert( sFiveAxisMillingKey[KEY_UUID] == "UUID") ;
+   return KEY_ZZZ ;
+}
+//----------------------------------------------------------------------------
+string
+FiveAxisMillingData::GetTitle( void) const
+{
+   return MCHDATA_GETNAME( FiveAxisMillingData) ;
+}
+
+//----------------------------------------------------------------------------
+int
+FindFiveAxisMillingKey( const string& sKey)
+{
+   auto TheRange = equal_range( sFiveAxisMillingKey.cbegin(), sFiveAxisMillingKey.cend(), sKey) ;
+   if ( TheRange.first == TheRange.second)
+      return - 1 ;
+   return int( TheRange.first - sFiveAxisMillingKey.cbegin()) ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::FromString( const string& sString, int& nKey)
+{
+  // separo chiave da valore
+   string sKey, sVal ;
+   SplitFirst( sString, "=", sKey, sVal) ;
+  // riconosco la chiave
+   nKey = FindFiveAxisMillingKey( ToUpper( sKey)) ;
+   bool bOk = ( nKey >= 0) ;
+   switch ( nKey) {
+   case KEY_AB :
+      m_sBlockedAxis = sVal ;
+      break ;
+   case KEY_AI :
+      m_sInitAngs = sVal ;
+      break ;
+   case KEY_DH :
+      m_sDepth = sVal ;
+      if ( m_sDepth.empty())
+         m_sDepth = "0" ;
+      break ;
+   case KEY_F :
+      bOk = ::FromString( sVal, m_dFeed) ;
+      break ;
+   case KEY_FE :
+      bOk = ::FromString( sVal, m_dEndFeed) ;
+      break ;
+   case KEY_FS :
+      bOk = ::FromString( sVal, m_dStartFeed) ;
+      break ;
+   case KEY_FT :
+      bOk = ::FromString( sVal, m_dTipFeed) ;
+      break ;
+   case KEY_INV :
+      bOk = ::FromString( sVal, m_bInvert) ;
+      break ;
+   case KEY_NAME :
+      m_sName = sVal ;
+      bOk = ! m_sName.empty() ;
+      break ;
+   case KEY_NNS :
+      m_sSysNotes = sVal ;
+      break ;
+   case KEY_NNU :
+      m_sUserNotes = sVal ;
+      break ;
+   case KEY_OL :
+      bOk = ::FromString( sVal, m_dOffsL) ;
+      break ;
+   case KEY_OR :
+      bOk = ::FromString( sVal, m_dOffsR) ;
+      break ;
+   case KEY_PS :
+      bOk = ::FromString( sVal, m_dStartPos) ;
+      break ;
+   case KEY_S :
+      bOk = ::FromString( sVal, m_dSpeed) ;
+      break ;
+   case KEY_SCC :
+      bOk = ::FromString( sVal, m_nSolCh) ;
+      break ;
+   case KEY_SUBTYPE :
+      bOk = ::FromString( sVal, m_nSubType) ;
+      break ;
+   case KEY_TNAME :
+      m_sToolName = sVal ;
+      break ;
+   case KEY_TI :
+      bOk = ::FromString( sVal, m_bToolInvert) ;
+      break ;
+   case KEY_TUUID :
+      bOk = ::FromString( sVal, m_ToolUuid) ;
+      break ;
+   case KEY_UUID :
+      bOk = ::FromString( sVal, m_Uuid) ;
+      break ;
+   default :
+      bOk = false ;
+      break ;
+   }
+   return bOk ;
+}
+
+//----------------------------------------------------------------------------
+string
+FiveAxisMillingData::ToString( int nKey) const
+{
+   switch ( nKey) {
+   case KEY_AB : return ( sFiveAxisMillingKey[KEY_AB] + "=" +  m_sBlockedAxis) ;
+   case KEY_AI : return ( sFiveAxisMillingKey[KEY_AI] + "=" +  m_sInitAngs) ;
+   case KEY_DH : return ( sFiveAxisMillingKey[KEY_DH] + "=" + m_sDepth) ;
+   case KEY_F : return ( sFiveAxisMillingKey[KEY_F] + "=" + ::ToString( m_dFeed)) ;
+   case KEY_FE : return ( sFiveAxisMillingKey[KEY_FE] + "=" + ::ToString( m_dEndFeed)) ;
+   case KEY_FS : return ( sFiveAxisMillingKey[KEY_FS] + "=" + ::ToString( m_dStartFeed)) ;
+   case KEY_FT : return ( sFiveAxisMillingKey[KEY_FT] + "=" + ::ToString( m_dTipFeed)) ;
+   case KEY_INV : return ( sFiveAxisMillingKey[KEY_INV] + "=" + ::ToString( m_bInvert)) ;
+   case KEY_NAME : return ( sFiveAxisMillingKey[KEY_NAME] + "=" + m_sName) ;
+   case KEY_NNS : return ( sFiveAxisMillingKey[KEY_NNS] + "=" + m_sSysNotes) ;
+   case KEY_NNU : return ( sFiveAxisMillingKey[KEY_NNU] + "=" + m_sUserNotes) ;
+   case KEY_OL : return ( sFiveAxisMillingKey[KEY_OL] + "=" + ::ToString( m_dOffsL)) ;
+   case KEY_OR : return ( sFiveAxisMillingKey[KEY_OR] + "=" + ::ToString( m_dOffsR)) ;
+   case KEY_PS : return ( sFiveAxisMillingKey[KEY_PS] + "=" + ::ToString( m_dStartPos)) ;
+   case KEY_S : return ( sFiveAxisMillingKey[KEY_S] + "=" + ::ToString( m_dSpeed)) ;
+   case KEY_SCC : return ( sFiveAxisMillingKey[KEY_SCC] + "=" + ::ToString( m_nSolCh)) ;
+   case KEY_SUBTYPE : return ( sFiveAxisMillingKey[KEY_SUBTYPE] + "=" + ::ToString( m_nSubType)) ;
+   case KEY_TI : return ( sFiveAxisMillingKey[KEY_TI] + "=" + ::ToString( m_bToolInvert)) ;
+   case KEY_TNAME : return ( sFiveAxisMillingKey[KEY_TNAME] + "=" + m_sToolName) ;
+   case KEY_TUUID : return ( sFiveAxisMillingKey[KEY_TUUID] + "=" + ::ToString( m_ToolUuid)) ;
+   case KEY_UUID : return ( sFiveAxisMillingKey[KEY_UUID] + "=" + ::ToString( m_Uuid)) ;
+   default : return "" ;
+   }
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::IsOptional( int nKey) const
+{
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::VerifySolCh( int nVal) const
+{
+   return IsValidOperationScc( nVal) ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::VerifyTool( const ToolsMgr* pToolsMgr, const string& sVal, const ToolData*& pTdata) const
+{
+   if ( pToolsMgr == nullptr)
+      return false ;
+   pTdata =  pToolsMgr->GetTool( sVal) ;
+   if ( pTdata == nullptr)
+      return false ;
+   if ( ( pTdata->m_nType & TF_MILL) == 0)
+      return false ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::GetTool( const ToolsMgr* pToolsMgr, const ToolData*& pTdata) const
+{
+   if ( pToolsMgr == nullptr)
+      return false ;
+   pTdata = pToolsMgr->GetTool( m_ToolUuid) ;
+   return ( pTdata != nullptr) ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::SetParam( int nType, bool bVal)
+{
+   switch ( nType) {
+   case MPA_INVERT :
+      m_bInvert = bVal ;
+      return true ;
+   case MPA_TOOLINVERT :
+      m_bToolInvert = bVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::SetParam( int nType, int nVal)
+{
+   switch ( nType) {
+   case MPA_SCC :
+      if ( ! VerifySolCh( nVal))
+         return false ;
+      m_nSolCh = nVal ;
+      return true ;
+   case MPA_SUBTYPE :
+      m_nSubType = nVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::SetParam( int nType, double dVal)
+{
+   switch ( nType) {
+   case MPA_SPEED :
+      m_dSpeed = dVal ;
+      return true ;
+   case MPA_FEED :
+      m_dFeed = dVal ;
+      return true ;
+   case MPA_STARTFEED :
+      m_dStartFeed = dVal ;
+      return true ;
+   case MPA_ENDFEED :
+      m_dEndFeed = dVal ;
+      return true ;
+   case MPA_TIPFEED :
+      m_dTipFeed = dVal ;
+      return true ;
+   case MPA_OFFSL :
+      m_dOffsL = dVal ;
+      return true ;
+   case MPA_OFFSR :
+      m_dOffsR = dVal ;
+      return true ;
+   case MPA_DEPTH :
+      m_sDepth = ::ToString( dVal) ;
+      return true ;
+   case MPA_STARTPOS :
+      m_dStartPos = dVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::SetParam( int nType, const string& sVal)
+{
+   switch ( nType) {
+   case MPA_NAME :
+      m_sName = sVal ;
+      return true ;
+   case MPA_TOOL :
+      m_sToolName = sVal ;
+      return true ;
+   case MPA_DEPTH_STR :
+      m_sDepth = sVal ;
+      return true ;
+   case MPA_TUUID :
+      return ::FromString( sVal, m_ToolUuid) ;
+   case MPA_UUID :
+      return ::FromString( sVal, m_Uuid) ;
+   case MPA_SYSNOTES :
+      m_sSysNotes = sVal ;
+      return true ;
+   case MPA_USERNOTES :
+      m_sUserNotes = sVal ;
+      return true ;
+   case MPA_INITANGS :
+      m_sInitAngs = sVal ;
+      return true ;
+   case MPA_BLOCKEDAXIS :
+      m_sBlockedAxis = sVal ;
+      return true ;
+   }
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::ResetTool( void)
+{
+   m_sToolName.clear() ;
+   m_ToolUuid.Clear() ;
+   return true ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::GetParam( int nType, bool& bVal) const
+{
+   switch ( nType) {
+   case MPA_INVERT :
+      bVal = m_bInvert ;
+      return true ;
+   case MPA_TOOLINVERT :
+      bVal = m_bToolInvert ;
+      return true ;
+   }
+   bVal = false ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::GetParam( int nType, int& nVal) const
+{
+   switch ( nType) {
+   case MPA_TYPE :
+      nVal = MT_GENMACHINING ;
+      return true ;
+   case MPA_SCC :
+      nVal = m_nSolCh ;
+      return true ;
+   case MPA_SUBTYPE :
+      nVal = m_nSubType ;
+      return true ;
+   }
+   nVal = 0 ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::GetParam( int nType, double& dVal) const
+{
+   switch ( nType) {
+   case MPA_SPEED :
+      dVal = m_dSpeed ;
+      return true ;
+   case MPA_FEED :
+      dVal = m_dFeed ;
+      return true ;
+   case MPA_STARTFEED :
+      dVal = m_dStartFeed ;
+      return true ;
+   case MPA_ENDFEED :
+      dVal = m_dEndFeed ;
+      return true ;
+   case MPA_TIPFEED :
+      dVal = m_dTipFeed ;
+      return true ;
+   case MPA_OFFSL :
+      dVal = m_dOffsL ;
+      return true ;
+   case MPA_OFFSR :
+      dVal = m_dOffsR ;
+      return true ;
+   case MPA_STARTPOS :
+      dVal = m_dStartPos ;
+      return true ;
+   }
+   dVal = 0 ;
+   return false ;
+}
+
+//----------------------------------------------------------------------------
+bool
+FiveAxisMillingData::GetParam( int nType, string& sVal) const
+{
+   switch ( nType) {
+   case MPA_NAME :
+      sVal = m_sName ;
+      return true ;
+   case MPA_TOOL :
+      sVal = m_sToolName ;
+      return true ;
+   case MPA_DEPTH_STR :
+      sVal = m_sDepth ;
+      return true ;
+   case MPA_TUUID :
+      sVal = ::ToString( m_ToolUuid) ;
+      return true ;
+   case MPA_UUID :
+      sVal = ::ToString( m_Uuid) ;
+      return true ;
+   case MPA_SYSNOTES :
+      sVal = m_sSysNotes ;
+      return true ;
+   case MPA_USERNOTES :
+      sVal = m_sUserNotes ;
+      return true ;
+   case MPA_INITANGS :
+      sVal = m_sInitAngs ;
+      return true ;
+   case MPA_BLOCKEDAXIS :
+      sVal = m_sBlockedAxis ;
+      return true ;
+   }
+   sVal = "" ;
+   return false ;
+}

FiveAxisMillingData.h

@@ -0,0 +1,76 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2024-2024
+//----------------------------------------------------------------------------
+// File : FiveAxisMillingData.h      Data : 22.05.24        Versione : 2.6e5
+// Contenuto : Dichiarazione della struct FiveAxisMillingData e costanti associate.
+//
+//
+//
+// Modifiche : 22.05.24 DS Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+#pragma once
+
+#include "MachiningData.h"
+
+//----------------------------------------------------------------------------
+struct FiveAxisMillingData : public MachiningData
+{
+   EgtUUID     m_ToolUuid ;        // identificativo universale dell'utensile
+   std::string m_sToolName ;       // nome dell'utensile
+   std::string m_sInitAngs ;       // angoli iniziali suggeriti (Nome1=val1,Nome2=val2)
+   std::string m_sBlockedAxis ;    // eventuale asse rotante bloccato (Nome=val)
+   int         m_nSolCh ;          // criterio scelta soluzione (quando possibili molteplici)
+   double      m_dSpeed ;          // velocità di rotazione (+ se CCW, - se CW)  ( se 0 da utensile)
+   double      m_dFeed ;           // velocità di lavorazione normale  ( se 0 da utensile)
+   double      m_dStartFeed ;      // velocità di lavorazione iniziale  ( se 0 da utensile)
+   double      m_dEndFeed ;        // velocità di lavorazione finale  ( se 0 da utensile)
+   double      m_dTipFeed ;        // velocità di lavorazione di sfondamento  ( se 0 da utensile)
+   double      m_dOffsR ;          // offset radiale ( se UNKNOWN_PAR da utensile)
+   double      m_dOffsL ;          // offset longitudinale ( se UNKNOWN_PAR da utensile)
+   bool        m_bToolInvert ;     // flag per inversione direzione utensile da geometria
+   bool        m_bInvert ;         // flag di inversione direzione lavorazione
+   std::string m_sDepth ;          // affondamento (espressione numerica)
+   double      m_dStartPos ;       // quota di inizio lavorazione (sempre >= 0)
+   int         m_nSubType ;        // da [GenMachining] di Ini di macchina
+   std::string m_sSysNotes ;       // note interne
+   std::string m_sUserNotes ;      // note dell'utente
+
+   FiveAxisMillingData( void)
+      : m_ToolUuid(), m_nSolCh( 0), m_dSpeed( 0), m_dFeed( 0), m_dStartFeed( 0), m_dEndFeed( 0), m_dTipFeed( 0),
+        m_dOffsR( 0), m_dOffsL( 0), m_bToolInvert( false), m_bInvert( false), m_dStartPos( 0), m_nSubType( 0) {}
+   FiveAxisMillingData* Clone( void) const override ;
+   bool CopyFrom( const MachiningData* pMdata) override ;
+   bool SameAs(const MachiningData* pMdata) const override  ;
+   int  GetType( void) const override
+           { return MT_FIVEAXISMILLING ; }
+   int  GetSize( void) const override ;
+   std::string GetTitle( void) const override ;
+   bool FromString( const std::string& sString, int& nKey) override ;
+   std::string ToString( int nKey) const override ;
+   bool IsOptional( int nKey) const override ;
+   bool SetParam( int nType, bool bVal) override ;
+   bool SetParam( int nType, int nVal) override ;
+   bool SetParam( int nType, double dVal) override ;
+   bool SetParam( int nType, const std::string& sVal) override ;
+   bool ResetTool( void) override ;
+   bool GetParam( int nType, bool& bVal) const override ;
+   bool GetParam( int nType, int& nVal) const override ;
+   bool GetParam( int nType, double& dVal) const override ;
+   bool GetParam( int nType, std::string& sVal) const override ;
+   bool GetTool( const ToolsMgr* pToolsMgr, const ToolData*& pTdata) const override ;
+   bool VerifyTool( const ToolsMgr* pToolsMgr, const std::string& sVal, const ToolData*& pTdata) const override ;
+   bool VerifySolCh( int nVal) const ;
+} ;
+
+//----------------------------------------------------------------------------
+inline const FiveAxisMillingData* GetFiveAxisMillingData( const MachiningData* pMdata)
+               { if ( pMdata == nullptr  ||  pMdata->GetType() != MT_FIVEAXISMILLING)
+                    return nullptr ;
+                 return ( static_cast<const FiveAxisMillingData*>( pMdata)) ; }
+inline FiveAxisMillingData* GetFiveAxisMillingData( MachiningData* pMdata)
+               { if ( pMdata == nullptr  ||  pMdata->GetType() != MT_FIVEAXISMILLING)
+                    return nullptr ;
+                 return ( static_cast<FiveAxisMillingData*>( pMdata)) ; }

MachConst.h

@@ -84,6 +84,12 @@ const std::string GENMACHINING_SEC = "GenMachining" ;
 // Chiave (radice) per nome lavorazione generica i-esima
 const std::string GENMACHINING_SCRIPT_KEY = "GenScript" ;
 
+//----------------------------------------------------------------------------
+// Sezione fresature 5assi nel file INI di macchina
+const std::string FIVEAXISMILLING_SEC = "5AxMilling" ;
+// Chiave (radice) per nome lavorazione 5assi i-esima
+const std::string FIVEAXISMILLING_SCRIPT_KEY = "5AxScript" ;
+
 //----------------------------------------------------------------------------
 // Sezione di attrezzaggio nel file INI di macchina
 const std::string SETUP_SEC = "Setup" ;

MachiningConst.h

@@ -107,7 +107,7 @@ GetMachiningTitle( int nMchType)
                                     "SurfRoughing",
                                     "SurfFinishing",
                                     "Waterjetting",
-                                    "5axMachining"} ;
+                                    "5AxisMilling"} ;
    switch ( nMchType) {
    case MT_DRILLING : return MchTitle[1] ;
    case MT_SAWING : return MchTitle[2] ;
@@ -121,7 +121,7 @@ GetMachiningTitle( int nMchType)
    case MT_SURFROUGHING : return MchTitle[10] ;
    case MT_SURFFINISHING : return MchTitle[11] ;
    case MT_WATERJETTING : return MchTitle[12] ;
-   case MT_5AXMACHINING : return MchTitle[13] ;
+   case MT_FIVEAXISMILLING : return MchTitle[13] ;
 
    }
    return MchTitle[0] ;

OperationConst.h

@@ -1,7 +1,7 @@
 //----------------------------------------------------------------------------
-//  EgalTech 2017-2019
+//  EgalTech 2017-2024
 //----------------------------------------------------------------------------
-// File : OperationConst.h           Data : 08.07.19        Versione : 2.1g2
+// File : OperationConst.h           Data : 22.05.24        Versione : 2.6e5
 // Contenuto : Costanti per le operazioni.      
 //
 //
@@ -9,6 +9,7 @@
 // Modifiche : 17.08.17 DS Creazione modulo.
 //             25.05.19 DS Aggiunte SurfRoughing e SurfFinishing.
 //             25.05.19 DS Aggiunta WaterJetting.
+//             22.05.24 DS Aggiunta FiveAxisMilling.
 //
 //----------------------------------------------------------------------------
 
@@ -32,7 +33,8 @@ static const std::string s_OpeClass[] = {"",
                                          "EMkChiseling",
                                          "EMkSurfRoughing",
                                          "EMkSurfFinishing",
-                                         "EMkWaterJetting"} ;
+                                         "EMkWaterJetting",
+                                         "EMkFiveAxisMilling"} ;
 
 //----------------------------------------------------------------------------
 // Dal tipo numerico restituisce la classe della operazione
@@ -53,6 +55,7 @@ GetOperationClass( int nOpeType)
    case OPER_SURFROUGHING : return s_OpeClass[11] ;
    case OPER_SURFFINISHING : return s_OpeClass[12] ;
    case OPER_WATERJETTING : return s_OpeClass[13] ;
+   case OPER_FIVEAXISMILLING : return s_OpeClass[14] ;
    }
    return s_OpeClass[0] ;
 }
@@ -88,6 +91,8 @@ GetOperationType( const std::string& sOpeClass)
       return OPER_SURFFINISHING ;
    else if ( sOpeClass == s_OpeClass[13])
       return OPER_WATERJETTING ;
+   else if ( sOpeClass == s_OpeClass[14])
+      return OPER_FIVEAXISMILLING ;
    else
       return OPER_NULL ;
-}
+}