Merge commit 'ab097ff0f029674cafbddc5925f84d4d0420019f'

AssemblyManager/AssemblyManagerVM.vb

@@ -21,7 +21,7 @@ Public Class AssemblyManagerVM
    Private m_VisibilityDoorList As Visibility = Visibility.Collapsed
    Public Property VisibilityDoorList As Visibility
       Get
-            Return m_VisibilityDoorList
+         Return m_VisibilityDoorList
       End Get
       Set(value As Visibility)
          m_VisibilityDoorList = value
@@ -81,7 +81,9 @@ Public Class AssemblyManagerVM
       If OptionModule.m_ConfigurationSoftware = ConfigType.Door Then
          ' ricarico la lista completa degli swing 
          NewAssName.SelAssembly.ListPartDoor(0).Door.SwingTypeList = OptionModule.m_SwingTypeList
-         NewAssName.SelAssembly.ListPartDoor(0).Door.SetSwing(OptionModule.m_Swing)
+         If String.IsNullOrEmpty(NewAssName.SelAssembly.ListPartDoor(0).Door.Swing) Then
+            NewAssName.SelAssembly.ListPartDoor(0).Door.SetSwing(OptionModule.m_Swing)
+         End If
          DdfFile.WriteDDFPart(NewAssName.SelAssembly.ListPartDoor(0).Door, sTempFile, False, False)
          ' assegno la porte salvata nel CurrPart.ddf come porta corrente del progetto
          Map.refPartPageVM.CurrPart = NewAssName.SelAssembly.ListPartDoor(0).Door
@@ -157,7 +159,7 @@ Public Class AssemblyManagerVM
          DdfFile.SaveErrorCompo = False
       End If
       ' controllo che il salvataggio sia andato a buon fine
-     
+
       If bConfirmSavin Then
          SavedAssName.IsModified = False
          ' ogni progetto salvato è l'ultimo da aprire, anche se il programma è chiuso dall'HardwareManager
@@ -321,18 +323,18 @@ Public Class AssemblyManagerVM
          End Select
          Map.refMainWindowVM.selectedWatcher = MainWindowVM.WatcherCalling.NoEvents
          ' se sono in modalità hardware allora esco senza caricare l'elenco delle porte
-         If Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nHardwarePage then Return true
-'-------------------------------------------------------------------------------------------------------------------------------------------------
+         If Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nHardwarePage Then Return True
+         '-------------------------------------------------------------------------------------------------------------------------------------------------
          ' devo ricalcolare l'elenco delle porte nel progetto corrente:
-         If OptionModule.m_SingleDoor then Return True
+         If OptionModule.m_SingleDoor Then Return True
          ' calcolo l'elenco delle porte solo dopo il salvataggio della porta corrente
-         If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified then Return true
-         If Not IsNothing( Map.refAssemblyManagerVM.CurrProject) andAlso Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.Name) then
+         If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified Then Return True
+         If Not IsNothing(Map.refAssemblyManagerVM.CurrProject) AndAlso Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.Name) Then
             Dim CurrAssemblyName As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
             Map.refAssemblyManagerVM.CurrProject.AssemblyList = New ObservableCollection(Of AssemblyName)
-            Dim DDFArray()as String = Directory.GetFiles(Map.refAssemblyManagerVM.CurrProject.Name)
-            For IndexFile As Integer = 0 to DDFArray.Count - 1
-               If Path.GetExtension(DDFArray(IndexFile)) <> DDF_EXTENSION then
+            Dim DDFArray() As String = Directory.GetFiles(Map.refAssemblyManagerVM.CurrProject.Name)
+            For IndexFile As Integer = 0 To DDFArray.Count - 1
+               If Path.GetExtension(DDFArray(IndexFile)) <> DDF_EXTENSION Then
                   Continue For
                End If
                Dim NewAssembly As New AssemblyName
@@ -340,12 +342,12 @@ Public Class AssemblyManagerVM
                NewAssembly.IsModified = False
                Map.refAssemblyManagerVM.CurrProject.AssemblyList.Add(NewAssembly)
             Next
-            If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) then
+            If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
                Try
                   'Map.refAssemblyManagerVM.CurrProject = LocalCurrProject
                   'LocalCurrProject.SelAssemblyName = LocalCurrProject.AssemblyList.First(Function(x) x.Name = Local_AssemblyName.Name)
                   Map.refAssemblyManagerVM.CurrProject = Map.refAssemblyManagerVM.CurrProject
-                  Map.refAssemblyManagerVM.CurrProject.SelAssemblyName = Map.refAssemblyManagerVM.CurrProject.AssemblyList.First(Function(x) x.Name = CurrAssemblyName)    
+                  Map.refAssemblyManagerVM.CurrProject.SelAssemblyName = Map.refAssemblyManagerVM.CurrProject.AssemblyList.First(Function(x) x.Name = CurrAssemblyName)
                Catch ex As Exception
                   EgtOutLog("Aggiornamento Progetto Corrente: impossibile caricare ultima porta")
                End Try
@@ -372,8 +374,8 @@ Public Class AssemblyManagerVM
                Next
             Next
          End If
-       End If
-       Return True
+      End If
+      Return True
    End Function
 
    ' ricerca il tipo di compoente chiamato
@@ -446,7 +448,7 @@ Public Class AssemblyManagerVM
       If Not bBrandExists OrElse Not bFileExists Then
          '' se la compoenente che sto caricando era corretta
          'ErrCompo.LoadByDefault = True
-            ' se il brand non esiste, ma è selezionato
+         ' se il brand non esiste, ma è selezionato
          If Not bBrandExists Then
             ErrCompo.MissingDirectory = True
             ErrCompo.MissingFile = True
@@ -1072,7 +1074,7 @@ Public Class AssemblyManagerVM
 
    Public Function ManageModified() As Boolean
       ' verifico se selezionato esiste e modificato
-      If Not IsNothing (m_CurrProject) AndAlso Not IsNothing(m_CurrProject.SelAssemblyName) AndAlso m_CurrProject.SelAssemblyName.IsModified Then
+      If Not IsNothing(m_CurrProject) AndAlso Not IsNothing(m_CurrProject.SelAssemblyName) AndAlso m_CurrProject.SelAssemblyName.IsModified Then
          Dim sText As String = String.Format(EgtMsg(50109), Path.GetFileNameWithoutExtension(m_CurrProject.SelAssemblyName.Name))
          Select Case MessageBox.Show(sText, "", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
             Case MessageBoxResult.Yes
@@ -1303,7 +1305,8 @@ Public Class AssemblyManagerVM
       ' creo le Ante
       For IndexDoor As Integer = 0 To nDoorNumber - 1
          Dim Type As String = ConstGen.PART_DO_ & IndexDoor + 1
-         If IsNothing(ReserchPartDoor(Type)) Then
+         Dim _PartDoor As PartDoor = ReserchPartDoor(Type)
+         If IsNothing(_PartDoor) Then
             Dim Local_PartDoor As New PartDoor
             Local_PartDoor.Door = New Part(Local_PartDoor)
             Local_PartDoor.Door.TypePart = Type
@@ -1313,7 +1316,7 @@ Public Class AssemblyManagerVM
             'CreateNewPropertiesList(Local_PartDoor.Door.PropertiesList, Local_PartDoor.Door.SelectedMaterial)
             CurrAssembly.ListPartDoor.Add(Local_PartDoor)
          Else
-            'CurrAssembly.ListPartDoor.Add(ReserchPartDoor(Type))
+            CurrAssembly.ListPartDoor.Add(_PartDoor)
          End If
       Next
 
@@ -1610,7 +1613,7 @@ Public Class AssemblyManagerVM
          SaveFileDialog.FileName &= DDF_EXTENSION
       End If
       ' verifico che non sia bloccato (in fase di creazione di una nuova porta posso avere il file .lck senza il ddf)
-      If Utility.IsFileLocked(Path.GetDirectoryName(SaveFileDialog.FileName), Path.GetFileNameWithoutExtension(SaveFileDialog.FileName)) then
+      If Utility.IsFileLocked(Path.GetDirectoryName(SaveFileDialog.FileName), Path.GetFileNameWithoutExtension(SaveFileDialog.FileName)) Then
          If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
             Utility.OutLog("Apertura progetto : " & Map.refAssemblyManagerVM.CurrProject.Name)
             Utility.LockDir(Map.refAssemblyManagerVM.CurrProject.Name, Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.GraphicName)
@@ -1654,7 +1657,7 @@ Public Class AssemblyManagerVM
       ' aggiorno la lista
       '------------------------------------------------------------------------------------------------------------------------------------------------
       ' LETTURA DI UN FILE DI TIPO TEMPLATE
-      If ImportTemplate(sImportTemplate) Then 
+      If ImportTemplate(sImportTemplate) Then
          Utility.OutLog("Apertura progetto : " & Local_AssemblyName.Name)
          Utility.LockDir(Path.GetDirectoryName(Local_AssemblyName.Name), Path.GetFileNameWithoutExtension(Local_AssemblyName.Name))
          '  carico il nome come Assemblato selezionato

AssemblyManager/AssemblyName.vb

@@ -17,6 +17,16 @@ Public Class AssemblyName
       End Set
    End Property
 
+   Private m_OrigTemplate As String = String.Empty
+   Public Property OrigTemplate As String
+      Get
+         Return m_OrigTemplate
+      End Get
+      Set(value As String)
+         m_OrigTemplate = value
+      End Set
+   End Property
+
    Private m_IsModified As Boolean
    Public Property IsModified As Boolean
       Get

DdfFile.vb

@@ -64,6 +64,10 @@ Friend Module DdfFile
       Dim Config As String = IniFile.m_sDoorsDirPath
       Config = Path.GetFileName(Config)
       DdfFileContent.Add("#Config: " & Config)
+      ' versione 2.6g1: salvo il nome del template da cui è genetato il file corrente
+      If Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.OrigTemplate) Then
+         DdfFileContent.Add("#OrigTemplate: " & Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.OrigTemplate)
+      End If
       If Not IsNothing(Part.TypePart) Then
          DdfFileContent.Add("#" & PrintTitleDDFPart(Part.TypePart))
       End If
@@ -981,7 +985,7 @@ Friend Module DdfFile
             z = DoubleToString(-dDeltaThickness + dDeltaBottom, 4)
          End If
       End If
-         Return z
+      Return z
    End Function
 
 #End Region    ' Funzioni per il posizionamento
@@ -1077,10 +1081,32 @@ Friend Module DdfFile
       Return True
    End Function
 
-   Private Function AscendingOrder(List As ObservableCollection(Of Compo), DdfFileContent As List(Of String), bIsDDF As Boolean) As Boolean
+   ' ritorna una lista con tutti i compo dello stesso tipo
+   Public Function GetCurrentListSameCompoType(ByVal ListCompo As ObservableCollection(Of Compo), sCompoTypeDDF As String) As ObservableCollection(Of Compo)
+      Dim TempList As New ObservableCollection(Of Compo)
+      For Index As Integer = 0 To ListCompo.Count - 1
+         If ListCompo(Index).CompoType.DDFName = sCompoTypeDDF Then
+            TempList.Add(ListCompo(Index))
+         End If
+      Next
+      Return TempList
+   End Function
+
+   ' ritorna una lista con tutti i compo dello stesso tipo con lo stesso nome
+   Public Function GetCurrentListSameCompoDDFName(ByVal ListCompo As ObservableCollection(Of Compo), sSelFile As String, sSelBrand As String) As ObservableCollection(Of Compo)
+      Dim TempList As New ObservableCollection(Of Compo)
+      For Index As Integer = 0 To ListCompo.Count - 1
+         If ListCompo(Index).SelFile = sSelFile And ListCompo(Index).SelBrandPart = sSelBrand Then
+            TempList.Add(ListCompo(Index))
+         End If
+      Next
+      Return TempList
+   End Function
+
+   ' data la lista compo dello stesso tipo, la riordino ( Config.ini → TidyLayer = ...)
+   Public Sub GetOrderedListSameCompo(ByRef List As ObservableCollection(Of Compo))
       Dim tidyParamIndex1 As Integer = -1
       Dim tidyParamIndex2 As Integer = -1
-      Dim WritingError As String = String.Empty
       If List.Count >= 2 Then
          For IndexList1 As Integer = 0 To List.Count - 2
             For IndexList2 As Integer = IndexList1 + 1 To List.Count - 1
@@ -1113,6 +1139,66 @@ Friend Module DdfFile
             Next
          Next
       End If
+   End Sub
+
+   ' rercupera indice nella lista corrente della componente passata
+   Public Function GetIndexInList(ListCompo As ObservableCollection(Of Compo), SelCompo As Compo) As Integer
+      ' Se sono qui allora i compo devono avere lo stesso nome?.. Mettere controllo..
+      Dim bFoundSelCompo As Boolean = True
+      For Ind As Integer = 0 To ListCompo.Count - 1
+         For Ind2 As Integer = 0 To ListCompo(Ind).CompoParamList.Count - 1
+            ' verifco che gli oggetti abbiano lo stesso nome?.. Metter controllo..
+            If TypeOf ListCompo(Ind).CompoParamList(Ind2) Is TextBoxOnOffParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is TextBoxOnOffParam Then
+               Dim Temp As TextBoxOnOffParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), TextBoxOnOffParam)
+               Dim SelTemp As TextBoxOnOffParam = DirectCast(SelCompo.CompoParamList(Ind2), TextBoxOnOffParam)
+               If Temp.Value <> SelTemp.Value Or Temp.IsActive <> SelTemp.IsActive Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is TextBoxParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is TextBoxParam Then
+               Dim Temp As TextBoxParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), TextBoxParam)
+               Dim SelTemp As TextBoxParam = DirectCast(SelCompo.CompoParamList(Ind2), TextBoxParam)
+               If Temp.Value <> SelTemp.Value Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is ComboBoxOnOffParam And
+               TypeOf SelCOmpo.CompoParamList(Ind2) Is ComboBoxOnOffParam Then
+               Dim Temp As ComboBoxOnOffParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), ComboBoxOnOffParam)
+               Dim SelTemp As ComboBoxOnOffParam = DirectCast(SelCompo.CompoParamList(Ind2), ComboBoxOnOffParam)
+               If Temp.SelItem <> SelTemp.SelItem Or Temp.IsActive <> SelTemp.IsActive Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is ComboBoxParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is ComboBoxParam Then
+               Dim Temp As ComboBoxParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), ComboBoxParam)
+               Dim SelTemp As ComboBoxParam = DirectCast(SelCompo.CompoParamList(Ind2), ComboBoxParam)
+               If Temp.SelItem <> SelTemp.SelItem Then
+                  bFoundSelCompo = False
+               End If
+            Else
+               ' le componeti non sono dello stesso tipo!
+               Return -1
+            End If
+            ' verifico che il parametro corrente è uguale a quello della compo selezionata
+            If Not bFoundSelCompo Then
+               Exit For
+            End If
+         Next
+         ' verifico se ho trovato la compo
+         If Not bFoundSelCompo Then
+            bFoundSelCompo = True
+         Else
+            Return Ind
+         End If
+      Next
+      ' se esco senza aver trovato niente 
+      Return -1
+   End Function
+
+   Private Function AscendingOrder(List As ObservableCollection(Of Compo), DdfFileContent As List(Of String), bIsDDF As Boolean) As Boolean
+      Dim WritingError As String = String.Empty
+      GetOrderedListSameCompo(List)
       ' stampa lista 
       DdfFileContent.AddRange(GenerateCompolistDDF(List(0), WritingError, True, bIsDDF))
       For IndexItem As Integer = 1 To List.Count - 1

DoorParameters/Part.vb

@@ -2,6 +2,7 @@
 Imports System.ComponentModel
 Imports System.IO
 Imports EgtUILib
+Imports EgtWPFLib5
 Imports System.Text.RegularExpressions
 
 Public Class Part
@@ -1196,6 +1197,7 @@ Public Class Part
       End Get
       Set(value As Compo)
          m_SelCompo = value
+         MarkCompoInScena()
       End Set
    End Property
 
@@ -1505,6 +1507,55 @@ Public Class Part
 
 #End Region    'AddCompo
 
+#Region "Selection compo"
+
+   Private Sub ResetAllMark()
+      Dim nIdFirstPart As Integer = EgtGetFirstPart()
+      Dim nIdLay As Integer = EgtGetFirstLayer(nIdFirstPart)
+      While nIdLay <> GDB_ID.NULL
+         EgtResetMark(nIdLay)
+         nIdLay = EgtGetNextLayer(nIdLay)
+      End While
+      EgtDraw()
+   End Sub
+
+   Private Sub MarkCompoInScena()
+      If IsNothing(m_SelCompo) Then Return
+      If GetMainPrivateProfileInt(S_GENERAL, "MarkCompo", 0) = 0 Then Return
+      ResetAllMark()
+      ' recupero la lista dei compo dello stesso tipo
+      Dim TempList As ObservableCollection(Of Compo) = DdfFile.GetCurrentListSameCompoType(m_CompoList, m_SelCompo.CompoType.DDFName)
+      ' recupero la lista dei compo con lo stesso nome
+      TempList = DdfFile.GetCurrentListSameCompoDDFName(TempList, m_SelCompo.SelFile, m_SelCompo.SelBrandPart)
+      ' riordino la lista appena trovata secondo le regole di stampa DDF
+      DdfFile.GetOrderedListSameCompo(TempList)
+      ' ontengo la posizione prevista nella grafica
+      Dim IndexInList As Integer = DdfFile.GetIndexInList(TempList, m_SelCompo)
+      ' recupero la lista ordinata
+      Dim sCompoName As String = m_SelCompo.SelFile
+      ' recupero il primo part disponibile
+      Dim nIdFirstPart As Integer = EgtGetFirstPart()
+      Dim nIdLay As Integer = EgtGetFirstLayer(nIdFirstPart)
+      Dim IndexLay As Integer = 0
+      While nIdLay <> GDB_ID.NULL
+         Dim sInfoPath As String = String.Empty
+         If EgtGetInfo(nIdLay, "Path", sInfoPath) Then
+            Dim sNamePath As String = Path.GetFileNameWithoutExtension(sInfoPath)
+            If sNamePath = sCompoName And IndexLay = IndexInList Then
+               EgtSetMark(nIdLay)
+               Exit While
+            ElseIf sNamePath = sCompoName And IndexLay < IndexInList Then
+               IndexLay = IndexLay + 1
+            End If
+         End If
+         nIdLay = EgtGetNextLayer(nIdLay)
+      End While
+
+      EgtDraw()
+   End Sub
+
+#End Region
+
 #Region "RemoveCompo"
 
    Friend Sub RemoveCompo(CompoToRemove As Compo, Optional OnlyOnJamb As Boolean = False)
@@ -3360,6 +3411,7 @@ Public Class Part
 
    ' utilizzata per generare la porta/jamb dell'Hardware
    Sub New(Hardware As String)
+
       If Not String.IsNullOrEmpty(Hardware) Then
          Me.m_Width = OptionModule.m_WidthJamb
          Me.m_Height = OptionModule.m_Height
@@ -3393,10 +3445,77 @@ Public Class Part
          Me.TypePart = ConstGen.PART_FRAME_LEFT
          Return
       End If
-      Me.m_Width = OptionModule.m_Width
-      Me.m_Height = OptionModule.m_Height
-      Me.m_Thickness = OptionModule.m_Thickness
-      Me.SetSwing(OptionModule.m_Swing)
+
+      Dim bCLoneDoor As Boolean = (GetMainPrivateProfileInt(S_GENERAL, "CloneDoor", 0) = 1)
+      ' Se abilitato in file Ini "DoorClone" allora verifico se esiste una porta corrente
+      If bCLoneDoor And Not IsNothing(Map.refAssemblyManagerVM) AndAlso Not IsNothing(Map.refAssemblyManagerVM.CurrProject) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor) Then
+         ' Se presente una sola anta
+         Dim nPartDoor As Integer = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count
+         If nPartDoor = 1 Then
+            Dim LocalPartDoor As PartDoor = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0)
+            If Not IsNothing(LocalPartDoor.Door) Then
+               Me.m_Width = LocalPartDoor.Door.m_Width
+               Me.m_Height = LocalPartDoor.Door.m_Height
+               Me.m_Thickness = LocalPartDoor.Door.m_Thickness
+               Me.SetSwing(LocalPartDoor.Door.m_Swing)
+               Me.SetLockEdgeType(New EdgeType(LocalPartDoor.Door.LockEdgeType.Name, Visibility.Visible))
+               Me.SetHingeEdgeType(New EdgeType(LocalPartDoor.Door.HingeEdgeType.Name, Visibility.Visible))
+               Me.SetTopType(New EdgeType(LocalPartDoor.Door.TopType.Name, Visibility.Visible))
+               Me.SetBottomType(New EdgeType(LocalPartDoor.Door.BottomType.Name, Visibility.Visible))
+            Else
+               ' Devo usare i parametri di default
+               Me.m_Width = OptionModule.m_Width
+               Me.m_Height = OptionModule.m_Height
+               Me.m_Thickness = OptionModule.m_Thickness
+               Me.SetSwing(OptionModule.m_Swing)
+               Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            End If
+
+         ElseIf nPartDoor > 1 Then
+            ' Assemblati
+            Dim WdSelPartV As New SelectPartV()
+            Dim WdSelPartVM As New SelectPartVM("Selezione della porta", "Selezione anta", nPartDoor, 1)
+            WdSelPartV.DataContext = WdSelPartVM
+            WdSelPartV.ShowDialog()
+            Dim nSelection As Integer = CInt(WdSelPartVM.Selection.Split(" "c)(1)) - 1
+            ' Apro una finestra per chiedere quale anta usare come riferimento
+            Dim LocalPartDoor As PartDoor = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(nSelection)
+            Me.m_Width = LocalPartDoor.Door.m_Width
+            Me.m_Height = LocalPartDoor.Door.m_Height
+            Me.m_Thickness = LocalPartDoor.Door.m_Thickness
+            Me.SetSwing(LocalPartDoor.Door.m_Swing)
+            Me.SetLockEdgeType(New EdgeType(LocalPartDoor.Door.LockEdgeType.Name, Visibility.Visible))
+            Me.SetHingeEdgeType(New EdgeType(LocalPartDoor.Door.HingeEdgeType.Name, Visibility.Visible))
+            Me.SetTopType(New EdgeType(LocalPartDoor.Door.TopType.Name, Visibility.Visible))
+            Me.SetBottomType(New EdgeType(LocalPartDoor.Door.BottomType.Name, Visibility.Visible))
+         Else
+            ' Devo usare i parametri di default
+            Me.m_Width = OptionModule.m_Width
+            Me.m_Height = OptionModule.m_Height
+            Me.m_Thickness = OptionModule.m_Thickness
+            Me.SetSwing(OptionModule.m_Swing)
+            Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         End If
+      Else
+         Me.m_Width = OptionModule.m_Width
+         Me.m_Height = OptionModule.m_Height
+         Me.m_Thickness = OptionModule.m_Thickness
+         Me.SetSwing(OptionModule.m_Swing)
+         Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+      End If
+
       If Not IsNothing(OptionModule.m_CurrMaterial) Then
          Try
             Me.SetMaterial(m_MaterialList.First(Function(x) x.Name = Trim(OptionModule.m_CurrMaterial.Name)))
@@ -3409,10 +3528,6 @@ Public Class Part
       Me.m_IsActive = True
       Me.m_Measure = ConvertMmUnitsToString(OptionModule.m_bIsMmUnit)
       Me.m_Weight = OptionModule.m_Weight
-      Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
       Me.m_LockEdgeMachining = OptionModule.m_LockEdgeMachining
       Me.m_HingeEdgeMachining = OptionModule.m_HingeEdgeMachining
       Me.m_TopMachining = OptionModule.m_TopMachining

EgtDOORCreator.vbproj

@@ -223,6 +223,10 @@
     </Compile>
     <Compile Include="ProjectManager\ProjectManagerVM.vb" />
     <Compile Include="ProjectManager\MySaveFileDialogVM.vb" />
+    <Compile Include="ProjectManager\SelectPartV.xaml.vb">
+      <DependentUpon>SelectPartV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ProjectManager\SelectPartVM.vb" />
     <Compile Include="RegexFunction.vb" />
     <Compile Include="ReportInfo\ReportCompo.vb" />
     <Compile Include="SceneManager\DimensioningPanel\DimensioningPanelV.xaml.vb">
@@ -363,6 +367,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="ProjectManager\SelectPartV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="SceneManager\DimensioningPanel\DimensioningPanelV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>

HardwareManager/Hardware.vb

@@ -83,8 +83,8 @@ Public Class Hardware
          If Not IsNothing(value) Then
             m_SelBrand = value
          ElseIf Not IsNothing(value) AndAlso Not Directory.Exists(value.ModelDir) Then
-         ' 50542 = {0}: Directory does not exist!
-            ErrorReading = String.Format(EgtMsg(50542),value.ModelDir)
+            ' 50542 = {0}: Directory does not exist!
+            ErrorReading = String.Format(EgtMsg(50542), value.ModelDir)
             RefreshTemplateListEgtDOORCreator()
          Else
             Return
@@ -130,8 +130,8 @@ Public Class Hardware
                SelTemplate = String.Empty
                'Map.refSceneManagerVM.RefreshBtn()
             End If
-            Else
-               SelTemplate = String.Empty
+         Else
+            SelTemplate = String.Empty
             'Map.refSceneManagerVM.RefreshBtn()
          End If
          ' termine della selezione
@@ -530,7 +530,9 @@ Public Class Hardware
       Else
          SwingTemplate = "RH"
       End If
-      IniFile.StdTemplateGetPrivateProfileString("Hardware", "Swing", SwingTemplate, SwingTemplate)
+      If String.IsNullOrEmpty(SwingTemplate) Or Not (GetMainPrivateProfileInt(S_GENERAL, "CloneDoor", 0) = 1) Then
+         IniFile.StdTemplateGetPrivateProfileString("Hardware", "Swing", SwingTemplate, SwingTemplate)
+      End If
       Map.refHardwarePageVM.GenericPart.SetSwing(SwingTemplate)
       If bIsFrame Then
          IniFile.StdTemplateGetPrivateProfileString("Hardware", "SwingFrame", "RH", SwingTemplate)
@@ -555,17 +557,17 @@ Public Class Hardware
       If Map.refHardwarePageVM.GenericPart.CompoList.Count < 1 Then Return
       'If String.IsNullOrEmpty(HardwareGeneral.JambSide) Then
       For Each Item In Map.refHardwarePageVM.GenericPart.CompoList(0).CompoParamList
-            If TypeOf Item Is ComboBoxParam AndAlso
-               Item.DDFName = "side" Then
-               Dim CBoxPar As ComboBoxParam = DirectCast(Item, ComboBoxParam)
-               Dim IndexItem As Integer = CBoxPar.ItemList.IndexOf(CBoxPar.SelItem)
-               If IndexItem > -1 Then
-                  HardwareGeneral.SetJambSide(CBoxPar.ItemListDDF(IndexItem))
-               End If
-               'HardwareGeneral.SetJambSide(CBoxPar.SelItem)
-               Exit For
+         If TypeOf Item Is ComboBoxParam AndAlso
+            Item.DDFName = "side" Then
+            Dim CBoxPar As ComboBoxParam = DirectCast(Item, ComboBoxParam)
+            Dim IndexItem As Integer = CBoxPar.ItemList.IndexOf(CBoxPar.SelItem)
+            If IndexItem > -1 Then
+               HardwareGeneral.SetJambSide(CBoxPar.ItemListDDF(IndexItem))
             End If
-         Next
+            'HardwareGeneral.SetJambSide(CBoxPar.SelItem)
+            Exit For
+         End If
+      Next
       'End If
       If HardwareGeneral.JambSide.ToLower.Contains("hinge") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_LEFT & HINGE
@@ -581,21 +583,21 @@ Public Class Hardware
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_Height)
          End If
          Return
-         ElseIf HardwareGeneral.JambSide.ToLower.Contains("top") Then
+      ElseIf HardwareGeneral.JambSide.ToLower.Contains("top") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_TOP & TOP
          If Not HardwarePartVM.bIsSettingDoor Then
             Map.refHardwarePageVM.GenericPart.SetWidth(OptionModule.m_Width)
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_ThicknessHead)
          End If
          Return
-         ElseIf HardwareGeneral.JambSide.ToLower.Contains("bottom") Then
+      ElseIf HardwareGeneral.JambSide.ToLower.Contains("bottom") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_BOTTOM & BOTTOM
          If Not HardwarePartVM.bIsSettingDoor Then
             Map.refHardwarePageVM.GenericPart.SetWidth(OptionModule.m_Width)
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_ThicknessBottom)
          End If
          Return
-         End If
+      End If
 
    End Sub
 
@@ -826,7 +828,7 @@ Public Class Hardware
                End If
 
             End If
-               ParamIndex += 1
+            ParamIndex += 1
          End While    ' termina lettura del capitolo
 
          GroupChapters.Add(Chapter)

MainWindow/MainWindowModel.vb

@@ -76,8 +76,8 @@ Friend Class MainWindowModel
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
 
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2605, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2605, 1, IniFile.m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2608, 1, IniFile.m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2608, 1, IniFile.m_nKeyOptions)
       'Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       Dim sLogFile As String = IniFile.m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

My Project/AssemblyInfo.vb

@@ -32,7 +32,7 @@ Imports System.Windows
 
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtDOORCreator")>
-<Assembly: AssemblyCopyright("Copyright ©  2016-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2016-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 
@@ -72,5 +72,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.5.1")>
-<Assembly: AssemblyFileVersion("2.6.5.1")>
+<Assembly: AssemblyVersion("2.6.8.2")>
+<Assembly: AssemblyFileVersion("2.6.8.2")>

ProjectManager/ProjectManagerVM.vb

@@ -6,7 +6,7 @@ Imports System.ComponentModel
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
-Imports Ionic.zip
+Imports Ionic.Zip
 
 Public Class ProjectManagerVM
    Implements INotifyPropertyChanged
@@ -411,10 +411,10 @@ Public Class ProjectManagerVM
          Map.refAssemblyManagerVM.VisibilityDoorList = Visibility.Visible
          Return
       End If
-         '-------------------------------------------------------------------------------------------------------------------------
+      '-------------------------------------------------------------------------------------------------------------------------
 
-         'Prima di tutto chiedo se vuole aprire un template
-         Dim sImportTemplate As String = Map.refAssemblyManagerVM.ShowDialogImportTemplate
+      'Prima di tutto chiedo se vuole aprire un template
+      Dim sImportTemplate As String = Map.refAssemblyManagerVM.ShowDialogImportTemplate
 
       ' dichiaro la finestra di dialogo
       Dim saveFileDialog1 As New System.Windows.Forms.SaveFileDialog()
@@ -476,6 +476,7 @@ Public Class ProjectManagerVM
          ' creo un nuovo assemblato
          Dim Local_AssemblyName As New AssemblyName
          Local_AssemblyName.Name = FilePathComplete
+         Local_AssemblyName.OrigTemplate = sImportTemplate
          Local_AssemblyName.GraphicName = Path.GetFileNameWithoutExtension(FilePathComplete)
          m_CurrProject.AssemblyList.Add(Local_AssemblyName)
          ' Seleziono AssembyName creato
@@ -487,13 +488,17 @@ Public Class ProjectManagerVM
          End If
          ' tolgo la visualizzazione della lista dei nomi
          Map.refAssemblyManagerVM.CurrProject = CurrProject
-         Map.refAssemblyManagerVM.ImportTemplate(sImportTemplate)
+         Dim bImportedTemplate As Boolean = Map.refAssemblyManagerVM.ImportTemplate(sImportTemplate)
          ' Creo nuovo assembly
          Map.refAssemblyManagerVM.NewCmd(Local_AssemblyName)
          Utility.OutLog("Creazione nuovo progetto : " & saveFileDialog1.FileName)
          Utility.LockDir(Path.GetDirectoryName(saveFileDialog1.FileName), Path.GetFileNameWithoutExtension(saveFileDialog1.FileName))
          Map.refAssemblyManagerVM.VisibilityDoorList = Visibility.Collapsed
          CurrProject.NotifyPropertyChanged("Name")
+         ' Se l'importazione del template è andata a buon fine allora salvo
+         If bImportedTemplate Then
+            Save()
+         End If
       End If
 
    End Sub
@@ -982,6 +987,7 @@ Public Class ProjectManagerVM
                Local_Assembly.IsModified = False
                CurrProject.AssemblyList.Add(Local_Assembly)
             Else
+               EgtOutLog("LastProject '" & OptionModule.m_sLastProject & "' is not a file or does not exist!")
                Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nNothingSelected
                Return
             End If
@@ -1188,17 +1194,48 @@ Public Class ProjectManagerVM
       End If
       ' se esite una porta, allora rendo possibile la  creazione di un template della porta corrente
       If Not IsNothing(Map.refPartPageVM.CurrPart) Then
-         ' Stampo il file correte nella cartella Template
-         Dim SaveFileDialog As New MySaveFileDialogVM
-         Dim SaveFileDialogWnd As New EgtWPFLib5.SaveFileDialogV(Application.Current.MainWindow, SaveFileDialog)
-         SaveFileDialog.Title = EgtMsg(50417)
-         SaveFileDialog.Directory = IniFile.m_TemplateDir
-         SaveFileDialog.Extension = DDT_EXTENSION
-         'SaveFileDialog.FileName = m_CurrProject.Name & "\"
-         ' se decido di chiuedere la finestra
-         If Not SaveFileDialogWnd.ShowDialog Then
+
+         ' ' Stampo il file correte nella cartella Template
+         ' Dim SaveFileDialog As New MySaveFileDialogVM
+         ' Dim SaveFileDialogWnd As New EgtWPFLib5.SaveFileDialogV(Application.Current.MainWindow, SaveFileDialog)
+         ' SaveFileDialog.Title = EgtMsg(50417)
+         ' SaveFileDialog.Directory = IniFile.m_TemplateDir
+         ' SaveFileDialog.Extension = DDT_EXTENSION
+         ' 'SaveFileDialog.FileName = m_CurrProject.Name & "\"
+         ' ' se decido di chiuedere la finestra
+         ' If Not SaveFileDialogWnd.ShowDialog Then
+         '    Return
+         ' End If
+
+         ' Apro la finestra di salvataggio generica
+         Dim SaveFileDialog As New System.Windows.Forms.SaveFileDialog()
+         ' controllo se esiste il file DDF
+         Dim sFilePath As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
+         If File.Exists(sFilePath) Then
+            ' recupero il nome del template che ha generato il DDF corrente
+            Dim DDTOrig As String = String.Empty
+            Dim fStream As String() = File.ReadAllLines(sFilePath)
+            DDTOrig = ReadOrigTemplate(fStream)
+            SaveFileDialog.Filter = "(*.ddt) |*.ddt"
+            SaveFileDialog.FilterIndex = 2
+            If String.IsNullOrEmpty(DDTOrig) Then
+               If OptionModule.m_SingleDoor Then
+                  SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name)
+               Else
+                  SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(Map.refAssemblyManagerVM.CurrProject.Name)
+               End If
+            Else
+               SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(DDTOrig)
+            End If
+         End If
+
+         ' avvio la ricerca nell'ultimo direttorio aperto
+         SaveFileDialog.InitialDirectory = IniFile.m_TemplateDir
+         If SaveFileDialog.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then
+            ' Interrompo la creazione del template
             Return
          End If
+
          ' Controllo se ha estensione il nome della porta
          If Path.HasExtension(SaveFileDialog.FileName) Then
             Dim sExtension As String = Path.GetExtension(SaveFileDialog.FileName)

ProjectManager/SelectPartV.xaml

@@ -0,0 +1,37 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="SelectPartV"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   Title="{Binding Title}"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+   IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
+   Height="100" Width="300" Topmost="True"
+   DataContext="{Binding RelativeSource={RelativeSource Self}}">
+
+    <!--<EgtWPFLib5:EgtCustomWindow.Resources>
+      <EgtWPFLib5:FileNameConverter x:Key="FileNameConverter"/>
+   </EgtWPFLib5:EgtCustomWindow.Resources>-->
+
+    <Grid>
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
+
+        <UniformGrid Columns="2" Grid.Row="0" Grid.ColumnSpan="2">
+            <TextBlock Margin="5" Height="24" Text="{Binding PartDoorMsg}" VerticalAlignment="Center"/>
+            <ComboBox Margin="5,0,5,0" Height="24" VerticalAlignment="Center"
+                      ItemsSource="{Binding PartDoorList}" SelectedItem="{Binding Selection}"/>
+        </UniformGrid>
+        
+
+        <Button IsDefault="True" Name="OkBtn" Grid.Row="2" Grid.ColumnSpan="2"
+               Content="{Binding SaveMsg}" Style="{DynamicResource EgtWPFLib5_InputButton}"/>
+    </Grid>
+
+    </EgtWPFLib5:EgtCustomWindow>

ProjectManager/SelectPartV.xaml.vb

@@ -0,0 +1,15 @@
+Public Class SelectPartV
+
+   Sub New()
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      Me.Close()
+   End Sub
+End Class

ProjectManager/SelectPartVM.vb

@@ -0,0 +1,46 @@
+Public Class SelectPartVM
+
+   Private m_Title As String = "Selection of door"
+   Public ReadOnly Property Title As String
+      Get
+         Return m_Title
+      End Get
+   End Property
+
+   Private m_PartDoorMsg As String = "Select part"
+   Public ReadOnly Property PartDoorMsg As String
+      Get
+         Return m_PartDoorMsg
+      End Get
+   End Property
+
+   Private m_PartDoorList As New List(Of String)
+   Public Property PartDoorList As List(Of String)
+      Get
+         Return m_PartDoorList
+      End Get
+      Set(value As List(Of String))
+         m_ListPartDoor = value
+      End Set
+   End Property
+
+   Private m_Selection As String = ""
+   Public Property Selection As String
+      Get
+         Return m_Selection
+      End Get
+      Set(value As String)
+         m_Selection = value
+      End Set
+   End Property
+
+   Sub New(TitleWd As String, MsgWd As String, nParts As Integer, nIndex As Integer)
+      m_Title = TitleWd
+      m_PartDoorMsg = MsgWd
+      For Index As Integer = 0 To nParts - 1
+         m_PartDoorList.Add("Door " & nParts.ToString)
+      Next
+      m_Selection = "Door " & nIndex.ToString
+   End Sub
+
+End Class

RegexFunction.vb

@@ -121,6 +121,20 @@ Module RegexFunction
       Return True
    End Function
 
+   ' leggo dal vettore per cercare la stringa OrigTemplate
+   Friend Function ReadOrigTemplate(fStream As String()) As String
+      Dim sOrigTemplate As String = String.Empty
+      For Each Line As String In fStream
+         If Line.Contains("#OrigTemplate") Then
+            sOrigTemplate = Regex.Match(Line, "\s*:\s*(.*?)\s*$").Groups(1).Value
+            Return sOrigTemplate
+            Exit For
+         End If
+      Next
+      ' Processo il tipo di configurazione
+      Return sOrigTemplate
+   End Function
+
    ' restituisce quello che segue l'uguale assegnata la parola chiave Err
    Friend Function ErrDraw(sLine As String) As Integer
       Dim sErrMsg As String = Regex.Match(sLine, "\s*(Err)\s*=\s*(.*?\b)\s*$").Groups(2).Value

Utility.vb

@@ -40,6 +40,10 @@ Public Module Utility
    End Function
 
    Public Function IsFileLocked(ByVal CurrDirectory As String, Optional ByVal CurrFile As String = "", Optional ByVal bSendMsg As Boolean = True) As Boolean
+      If String.IsNullOrEmpty(CurrDirectory) Then
+         EgtOutLog("Impossible to find directory")
+         Return False
+      End If
       Dim sLockFile As String = GenerateLockFileName(CurrDirectory, CurrFile)
       Dim bIsLocked As Boolean = False
       Dim FileList As String() = Directory.GetFiles(CurrDirectory)
@@ -554,9 +558,9 @@ Public Module Utility
             sMyVal = sMyVal.Replace("H", "(DGD.dH/25.4)")
             sMyVal = sMyVal.Replace("T", "(DGD.dT/25.4)")
          Else
-            sMyVal = sMyVal.Replace("W", "DGD.dW")
-            sMyVal = sMyVal.Replace("H", "DGD.dH")
-            sMyVal = sMyVal.Replace("T", "DGD.dT")
+            sMyVal = sMyVal.Replace("W", "(DGD.dW)")
+            sMyVal = sMyVal.Replace("H", "(DGD.dH)")
+            sMyVal = sMyVal.Replace("T", "(DGD.dT)")
          End If
       End If
       Return sMyVal