Aggiornamento versione

Assembly/Assembly.vb

@@ -1045,7 +1045,15 @@ Public Class Assembly
    End Enum
 
    ' carico il valore finale restituito dalla lettura dell'assembalto (di default errore)
-   Public bOk As ResultReadingAssembInfo = ResultReadingAssembInfo.ErrorInAssembInfo
+   Private m_bOk As ResultReadingAssembInfo = ResultReadingAssembInfo.ErrorInAssembInfo
+   Public Property bOk As ResultReadingAssembInfo
+      Get
+         Return m_bOk
+      End Get
+      Set(value As ResultReadingAssembInfo)
+         m_bOk = value
+      End Set
+   End Property
 
    ' vettore di righe del file ddf in lettura
    Private FileContent() As String
@@ -1497,7 +1505,13 @@ Public Class Assembly
                sDoorPiece = sDoorPiece.Remove(sDoorPiece.LastIndexOf("_"c) + 1)
             End If
             Map.refCompoPanelVM.GoBackVisibility = Visibility.Visible
-            Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            ' verifico che la lettura dell'assemblato sia andato a buon fine
+            If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo Then
+               ' forzo l'apertura della pagina DOOR
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nDDFPage
+            Else
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            End If
          Else
             ' significa che stiamo per leggere una porta singola, cerco una porta
             If Not Local_Door.TypePart.Contains("DO_") Then
@@ -1726,7 +1740,7 @@ Public Class Assembly
    ' controllo degli oggetti caricati nell'assemblato
    Private Function ControlAssemblyInformation() As Boolean
       Dim ErrorMessages As String = String.Empty
-      Select Case bOk
+      Select Case m_bOk
          Case ResultReadingAssembInfo.CorrectAssembInfo
             If OptionModule.m_ConfigurationSoftware = ConfigType.Door Then
                ' 50520=The current ddf is an assembly
@@ -1780,9 +1794,9 @@ Public Class Assembly
    Public Function ControlAssembly(Optional ByVal bSaving As Boolean = False) As String
       ' se è una porta singola oppure le info generali non sono state caricate correttamente non controllo l'assemblato
       If bSaving Then
-         If bOk <> ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
+         If m_bOk <> ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
       Else
-         If bOk = ResultReadingAssembInfo.ErrorInAssembInfo OrElse bOk = ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
+         If m_bOk = ResultReadingAssembInfo.ErrorInAssembInfo OrElse m_bOk = ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
       End If
       Dim WritingError As String = String.Empty
       Dim DoorTypeList As String = String.Empty
@@ -2498,6 +2512,7 @@ Public Class Assembly
             Map.refSceneManagerVM.RefreshBtn()
 
          Case "Height"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             HeightJamb()
             HeightDoor()
             TopRabbetJamb()
@@ -2507,6 +2522,7 @@ Public Class Assembly
             UpDateAllCompo()
 
          Case "Width"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             TopBottomWidth()
             TopRabbetJamb()
             BottomRabbetJamb()
@@ -2515,10 +2531,12 @@ Public Class Assembly
             UpDateAllCompo()
 
          Case "Thickness"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             TopRabbetJamb()
             UpDateAllCompo()
 
          Case "Swing"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             UpDateCompolistOnJamb()
             SwingJamb()
             SetPartDoorCurrAssembly()
@@ -2526,6 +2544,7 @@ Public Class Assembly
             'UpDateAllCompo()
 
          Case "DoorNumber"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             ClearRefOnAssembly()
             SetPartDoorCurrAssembly()
             ReverseDoor()

AssemblyManager/AssemblyManagerVM.vb

@@ -131,32 +131,65 @@ Public Class AssemblyManagerVM
             ' 50540 = The current ddf is a part of a frame, do you want to save?
             If MessageBox.Show(EgtMsg(50540), EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
                DdfFile.SaveErrorCompo = True
-               DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, True, False)
+               Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+               DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
                DdfFile.SaveErrorCompo = False
             Else
                Return False
             End If
          Else
             DdfFile.SaveErrorCompo = True
-            DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, True, False)
+            Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+            DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
             DdfFile.SaveErrorCompo = False
          End If
       Else
-         ' se il ddf che sto leggendo è composto dal al massimo due parti significa che c'è un errore
+         ' Se il ddf che sto leggendo è composto dal al massimo due parti significa che c'è un errore
          If SavedAssName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.CorrectAssembInfo AndAlso
                SavedAssName.SelAssembly.ListPartDoor.Count < 3 Then
-            ' se sto salvando meno di tre componenti significa che mancano qualche pezzo per essere un assemblato
+            ' Se sto salvando meno di tre componenti significa che mancano qualche pezzo per essere un assemblato
             SavedAssName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo
          End If
          Dim ErrorMessage As String = SavedAssName.SelAssembly.ControlAssembly(True)
+         Dim m_MessageBoxResult As MessageBoxResult = MessageBoxResult.Cancel
          If Not String.IsNullOrEmpty(ErrorMessage) Then
-            If Not MessageBox.Show(ErrorMessage, EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
-               Return False
+            ' Richiedo di scegliere se salvare come porta singola oppure come assemblato (altrimenti annullo il salvataggio)
+            If GetMainPrivateProfileInt(S_GENERAL, K_SAVEASSINGLEDOOR, 0) <> 0 Then
+               ' 50732=Save as Assembly (YES), Single door (NO).
+               m_MessageBoxResult = MessageBox.Show(EgtMsg(50732), EgtMsg(50144), MessageBoxButton.YesNoCancel, MessageBoxImage.Warning, MessageBoxResult.No)
+               If m_MessageBoxResult = MessageBoxResult.Cancel Then
+                  ' interrompo il salvataggio
+                  Return False
+               End If
+               If m_MessageBoxResult = MessageBoxResult.Yes Then
+                  ' Procedo a sovrascrivere il file come ASSEMBALTO
+                  DdfFile.SaveErrorCompo = True
+                  DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+                  DdfFile.SaveErrorCompo = False
+               ElseIf m_MessageBoxResult = MessageBoxResult.No Then
+                  ' Procedo a sovrascrivere il file come SINGLE DOOR
+                  DdfFile.SaveErrorCompo = True
+                  Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+                  DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
+                  DdfFile.SaveErrorCompo = False
+               End If
+            Else
+               ' Avviso che sto per salvare una porta singola come assemblato (altrimenti annullo il salvataggio)
+               If Not MessageBox.Show(ErrorMessage, EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
+                  Return False
+               End If
+               ' Procedo a sovrascrivere il file
+               DdfFile.SaveErrorCompo = True
+               DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+               DdfFile.SaveErrorCompo = False
             End If
+         Else
+            ' Non ci sono errori: procedo a sovrascrivere il file
+            DdfFile.SaveErrorCompo = True
+            DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+            DdfFile.SaveErrorCompo = False
          End If
-         DdfFile.SaveErrorCompo = True
-         DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
-         DdfFile.SaveErrorCompo = False
+
       End If
       ' controllo che il salvataggio sia andato a buon fine
 
@@ -984,8 +1017,10 @@ Public Class AssemblyManagerVM
          If OptionModule.AdjustDDT Then
             DdfFile.WriteDDFPart(OpenedAssName.SelAssembly.ListPartDoor(0).Door, OptionModule.SaveFileNameFromArgs, True, False)
             ' TERMINO TUTTO SUBITO
-            BlindProgLog("Scrittura file '.ddf' terminata")
-            End
+            EgtOutLog("Scrittura file '.ddf' terminata")
+            EgtExit()
+            Application.Current.Shutdown(0)
+            Return True
          End If
          ' aggiorno elenco quotature
          Map.refDimensioningPanelVM.LoadHardwareDimList()
@@ -1012,7 +1047,16 @@ Public Class AssemblyManagerVM
          If Assembly.Refreshing Then EgtZoom(ZM.ALL)
          m_CurrProject.SelAssemblyName.SelAssembly.MatchCompo()
          m_CurrProject.SelAssemblyName.SelAssembly.UpDateAllOrigValue()
-         Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+         ' Se mancano le info per generare l'assemblato accedo direttamente alla prima porta
+         If m_CurrProject.SelAssemblyName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo Then
+            If m_CurrProject.SelAssemblyName.SelAssembly.ListPartDoorOfDoor.Count > 0 Then
+               Map.refAssemblyPageVM.JambBtn(m_CurrProject.SelAssemblyName.SelAssembly.ListPartDoorOfDoor(0).Type)
+            Else
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            End If
+         Else
+            Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+         End If
       End If
       ' ogni progetto salvato è l'ultimo da aprire, anche se il programma è chiuso dall'HardwareManager
       ' controllo che esiste almeno un file aperto

Constants/ConstIni.vb

@@ -42,6 +42,7 @@ Module ConstIni
    Public Const K_EGTCAMEXE As String = "EgtCam5Exe"
    Public Const K_REFRESHTIME As String = "RefreshTime"
    Public Const K_DDFVERSION As String = "DDFVersion"
+   Public Const K_SAVEASSINGLEDOOR As String = "SaveAsSingleDoor"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"

DoorParameters/Part.vb

@@ -1873,6 +1873,7 @@ Public Class Part
       ' Messaggi di errore generici, se la stringa dei messaggi contiene delle informazioni allora visualizzo
       If Not String.IsNullOrWhiteSpace(sErrorInfo) Then
          Dim sTitle As String = EgtMsg(50101)
+         If Not IsNothing(ReadDoor) AndAlso Not IsNothing(ReadDoor.TypePart) Then sTitle &= ReadDoor.TypePart.ToString
          ' 50541 = {0} in reading {1}.
          If Not IsNothing(ReadDoor) Then String.Format(EgtMsg(50541), sTitle, ReadDoor.TypePart)
          MessageBox.Show(sErrorInfo, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
@@ -3497,10 +3498,11 @@ Public Class Part
          ElseIf nPartDoor > 1 Then
             ' Assemblati
             Dim WdSelPartV As New SelectPartV()
-            Dim WdSelPartVM As New SelectPartVM("Selezione della porta", "Selezione anta", nPartDoor, 1)
+            ' 50233=Selezione della porta, 50234=Selezione anta
+            Dim WdSelPartVM As New SelectPartVM(EgtMsg(50233), EgtMsg(50234), nPartDoor, 1)
             WdSelPartV.DataContext = WdSelPartVM
             WdSelPartV.ShowDialog()
-            Dim nSelection As Integer = CInt(WdSelPartVM.Selection.Split(" "c)(1)) - 1
+            Dim nSelection As Integer = WdSelPartVM.nSelectedIndex
             ' Apro una finestra per chiedere quale anta usare come riferimento
             Dim LocalPartDoor As PartDoor = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(nSelection)
             Me.m_Width = LocalPartDoor.Door.m_Width

MainWindow/MainWindowModel.vb

@@ -76,8 +76,8 @@ Friend Class MainWindowModel
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
 
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2612, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2612, 1, IniFile.m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2701, 1, IniFile.m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2701, 1, IniFile.m_nKeyOptions)
       'Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       Dim sLogFile As String = IniFile.m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

MainWindow/MainWindowV.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtWPFLib5
+Imports EgtUILib
 
 Class MainWindowV
 
@@ -12,6 +13,7 @@ Class MainWindowV
       InitializeComponent()
       ' Per leggere più argomenti devono essere scritti ognuno tra doppi apici e separati da spazio
       ' Esempio:"Argomento 1 di prova" "Argomento 2 di prova" 
+      EgtOutLog("   1 Numero argomenti: " & args.Length.ToString)
       If args.Length > 0 Then
          m_args = args
          RunBlindCode()
@@ -32,7 +34,7 @@ Class MainWindowV
 
    Private Sub MainWindowV_Unloaded(sender As Object, e As System.ComponentModel.CancelEventArgs) Handles Me.Closing
       ' Salvo posizione finestra (se non minimizzata)
-      If WindowState <> WindowState.Minimized Then
+      If WindowState <> WindowState.Minimized And Not OptionModule.AdjustDDT Then
          WinPosFromWindowToIni(Me, S_GENERAL, K_WINPLACE)
       End If
    End Sub
@@ -50,33 +52,34 @@ Class MainWindowV
    ' Lettura degli argomenti e scrittura di un file di Log con i parametri caricati
    Private Sub ReadArgs()
       If Not IsNothing(m_args) Then
-         StartBlinProgdLog(IniFile.m_sTempDir & "\BlindProgLog.txt")
          ' leggo gli argomenti: Il programma si chiude appena termina la scrittura del file DDF
          Dim Items() As String = m_args(0).Split(";"c)
+         EgtOutLog("   Argomenti: " & m_args.ToString)
          If Items.Length >= 5 Then
             ' Avvio progetto - LauncherOpt.Open_last_project (1)
             OptionModule.m_bLauncherOpenOnce = True
             ' Indico il percorso del file
             OptionModule.FileNameFromArgs = Items(0)
-            BlindProgLog("   File '.ddt' input : " & OptionModule.FileNameFromArgs)
+            EgtOutLog("   File '.ddt' input : " & OptionModule.FileNameFromArgs)
             ' Assegno i valore Width, Height, Thickness 
             OptionModule.m_Width = Items(1)
-            BlindProgLog("      width : " & OptionModule.m_Width)
+            EgtOutLog("      width : " & OptionModule.m_Width)
             OptionModule.m_Height = Items(2)
-            BlindProgLog("      height : " & OptionModule.m_Height)
+            EgtOutLog("      height : " & OptionModule.m_Height)
             OptionModule.m_Thickness = Items(3)
-            BlindProgLog("      thickness : " & OptionModule.m_Thickness)
+            EgtOutLog("      thickness : " & OptionModule.m_Thickness)
             ' Indico il percoso di salvataggio file DDF
             OptionModule.SaveFileNameFromArgs = Items(4)
-            BlindProgLog("   File '.ddf' output : " & OptionModule.SaveFileNameFromArgs)
+            EgtOutLog("   File '.ddf' output : " & OptionModule.SaveFileNameFromArgs)
             ' Nuovo parametro da laggere per gestione Swing 
             If Items.Length = 6 Then
                OptionModule.ForcesSideSwing = Items(5)
-               BlindProgLog("      swing : " & OptionModule.ForcesSideSwing)
+               EgtOutLog("      swing : " & OptionModule.ForcesSideSwing)
             End If
             ' abilito lettura dati 
             OptionModule.AdjustDDT = True
          Else
+            EgtOutLog("   Argomenti non conformi")
             ' blocco lettura dati
             OptionModule.AdjustDDT = False
             ' TERMINO TUTTO SUBITO!

MainWindow/MainWindowVM.vb

@@ -65,10 +65,13 @@ Public Class MainWindowVM
          Return m_SelectedPage
       End Get
       Set(value As ListPageEnum)
-         m_SelectedPage = value
-         NotifyPropertyChanged("PageControl")
-         If Not IsNothing(Map.refInstrumentPanelVM) Then
-            Map.refInstrumentPanelVM.NotifyPropertyChanged("DimensionVisibility")
+         ' Verifico che sia una vera modifica
+         If m_SelectedPage <> value Then
+            m_SelectedPage = value
+            NotifyPropertyChanged("PageControl")
+            If Not IsNothing(Map.refInstrumentPanelVM) Then
+               Map.refInstrumentPanelVM.NotifyPropertyChanged("DimensionVisibility")
+            End If
          End If
       End Set
    End Property
@@ -86,20 +89,20 @@ Public Class MainWindowVM
    Public ReadOnly Property PageControl As ContentControl
       Get
          If m_SelectedPage = ListPageEnum.nDDFPage Then
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If           
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_PartPage
          ElseIf m_SelectedPage = ListPageEnum.nAssemblyPage Then
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If 
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_AssemblyPage
@@ -109,11 +112,11 @@ Public Class MainWindowVM
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_HardwarePage
          Else
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If 
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return Nothing
@@ -139,7 +142,7 @@ Public Class MainWindowVM
 
    Public ReadOnly Property ProjectManagerControl As ContentControl
       Get
-         If m_SelectedPage <> ListPageEnum.nHardwarePage then
+         If m_SelectedPage <> ListPageEnum.nHardwarePage Then
             Return m_ProjectManager
          Else
             ProjectNameMsg = "HardwareManager"
@@ -155,6 +158,7 @@ Public Class MainWindowVM
    End Property
 
    Sub New()
+      EgtOutLog("  Creazione e inizializzazone MainWondowVM ")
       Map.SetRefMainWindowVM(Me)
       m_AssemblyPage = New AssemblyPageV
       m_AssemblyPage.DataContext = New AssemblyPageVM
@@ -168,7 +172,6 @@ Public Class MainWindowVM
       m_HardwarePage.DataContext = New HardwarePageVM
       m_AssemblyManager = New AssemblyManagerV
       m_AssemblyManager.DataContext = New AssemblyManagerVM
-      ' inserisco la scena
       m_SceneManager = New SceneManagerV
       m_SceneManager.DataContext = New SceneManagerVM
       Dim OptionsPage As OptionsVM = OptionPage
@@ -313,7 +316,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50545 = It has been deleted file: {0}, {1}.
-      Dim Message As String = String.Format(EgtMsg(50545), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50545), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnDeleted
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)
@@ -326,7 +329,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50543 = It has been renamed file: {0}, {1}.
-      Dim Message As String = String.Format(EgtMsg(50543), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50543), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnRenamed
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)
@@ -339,7 +342,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50544 = It has been created new file: {0}, {1}.
-      Dim Message As String =String.Format(EgtMsg(50544), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50544), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnCreated
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)

My Project/AssemblyInfo.vb

@@ -32,7 +32,7 @@ Imports System.Windows
 
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtDOORCreator")>
-<Assembly: AssemblyCopyright("Copyright ©  2016-2024 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2016-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 
@@ -72,5 +72,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.12.1")>
-<Assembly: AssemblyFileVersion("2.6.12.1")>
+<Assembly: AssemblyVersion("2.7.1.1")>
+<Assembly: AssemblyFileVersion("2.7.1.1")>

ProjectManager/ProjectManagerVM.vb

@@ -1006,6 +1006,10 @@ Public Class ProjectManagerVM
             Else
                EgtOutLog("LastProject '" & OptionModule.m_sLastProject & "' is not a file or does not exist!")
                Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nNothingSelected
+               If OptionModule.AdjustDDT Then
+                  EgtExit()
+                  Application.Current.Shutdown(3)
+               End If
                Return
             End If
          Else

ProjectManager/SelectPartV.xaml

@@ -6,7 +6,7 @@
    Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
    WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
    IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
-   Height="100" Width="300" Topmost="True"
+   Height="110" Width="300" Topmost="True"
    DataContext="{Binding RelativeSource={RelativeSource Self}}">
 
     <!--<EgtWPFLib5:EgtCustomWindow.Resources>
@@ -30,7 +30,8 @@
         </UniformGrid>
         
 
-        <Button IsDefault="True" Name="OkBtn" Grid.Row="2" Grid.ColumnSpan="2"
+        <Button IsDefault="True" Name="OkBtn" Grid.Row="2" Grid.ColumnSpan="2" HorizontalAlignment="Right"
+                Margin="0,0,5,0"
                Content="{Binding SaveMsg}" Style="{DynamicResource EgtWPFLib5_InputButton}"/>
     </Grid>
 

ProjectManager/SelectPartVM.vb

@@ -7,6 +7,13 @@
       End Get
    End Property
 
+   Private m_SaveMsg As String = "Ok"
+   Public ReadOnly Property SaveMsg As String
+      Get
+         Return m_SaveMsg
+      End Get
+   End Property
+
    Private m_PartDoorMsg As String = "Select part"
    Public ReadOnly Property PartDoorMsg As String
       Get
@@ -31,16 +38,31 @@
       End Get
       Set(value As String)
          m_Selection = value
+         m_nSelectedIndex = m_PartDoorList.IndexOf(m_Selection)
       End Set
    End Property
 
+   Private m_nSelectedIndex As Integer = 0
+   Public ReadOnly Property nSelectedIndex As Integer
+      Get
+         Return m_nSelectedIndex
+      End Get
+   End Property
+
+
    Sub New(TitleWd As String, MsgWd As String, nParts As Integer, nIndex As Integer)
       m_Title = TitleWd
       m_PartDoorMsg = MsgWd
-      For Index As Integer = 0 To nParts - 1
-         m_PartDoorList.Add("Door " & nParts.ToString)
+      For Each ItemDoor As PartDoor In Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor
+         m_PartDoorList.Add(ItemDoor.Type)
       Next
-      m_Selection = "Door " & nIndex.ToString
+      If Not IsNothing(Map.refPartPageVM) AndAlso Not IsNothing(Map.refPartPageVM.CurrPart) AndAlso
+      Not IsNothing(Map.refPartPageVM.CurrPart.TypePart) Then
+         m_nSelectedIndex = m_PartDoorList.IndexOf(Map.refPartPageVM.CurrPart.TypePart)
+      Else
+         m_nSelectedIndex = 0
+      End If
+      m_Selection = m_PartDoorList(m_nSelectedIndex)
    End Sub
 
 End Class

Utility.vb

@@ -270,6 +270,18 @@ Public Module Utility
       Return Index
    End Function
 
+   ' Verifica se il file/path indicato è ddf (true)
+   Friend Function IsCurrentFileDDF(sFileName As String) As Boolean
+      Dim IsDDF As Boolean = True
+      If Not String.IsNullOrEmpty(sFileName) AndAlso Path.HasExtension(sFileName) Then
+         Dim sExtension As String = Path.GetExtension(sFileName)
+         If sExtension.ToLower = DDT_EXTENSION Then
+            IsDDF = False
+         End If
+      End If
+      Return IsDDF
+   End Function
+
 #Region "PARAM LUA"
 
    ' elimina i commenti nel file lua
@@ -707,28 +719,6 @@ Public Module Utility
       Next
    End Sub
 
-#Region "Create Log"
-   Private sFileBlindProgLog As System.IO.StreamWriter
-   Private sFilePath As String = String.Empty
-
-   Public Sub StartBlinProgdLog(sPath As String)
-      sFilePath = sPath
-      sFileBlindProgLog = New System.IO.StreamWriter(sPath, True)
-      Dim sInfoStart As String = Date.Now.ToString & " Avvio programma in cieco"
-      sInfoStart &= vbCrLf & My.Application.Info.Version.Major.ToString() & "." & My.Application.Info.Version.Minor.ToString() &
-                                 (ChrW(97 - 1 + My.Application.Info.Version.Build)).ToString() & My.Application.Info.Version.Revision.ToString()
-      sFileBlindProgLog.WriteLine(sInfoStart)
-      sFileBlindProgLog.Close()
-   End Sub
-
-   Public Sub BlindProgLog(sMsg As String)
-      sFileBlindProgLog = File.AppendText(sFilePath)
-      sFileBlindProgLog.WriteLine(sMsg)
-      sFileBlindProgLog.Close()
-   End Sub
-
-#End Region
-
 End Module
 
 Public Class CompoBrandDir