Aggiunto SpecialPanel per eseguire script lua

- migliorata gestione Debug
- corretta gestione UserLevel
- ora possibilità di Configurazione interattiva dipende da UserLevel > 4
- sistemato script ChangeConfig.lua
- riabilitato lancio CAM5 con generazione lavorazioni (basta premere Shift).

AboutBoxWindow/AboutBoxV.xaml

@@ -1,7 +1,7 @@
 <Window x:Class="AboutBoxV"
     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-    Title="AboutBox" Height="320" Width="300" WindowStyle="None" ResizeMode="NoResize"
+    Title="AboutBox" Height="400" Width="360" WindowStyle="None" ResizeMode="NoResize"
     ShowInTaskbar="False" WindowStartupLocation="CenterOwner">
 
    <Border BorderThickness="2" BorderBrush="LightBlue">
@@ -18,11 +18,10 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="2.5*"/>
+            <RowDefinition Height="0.35*"/>
             <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.25*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.25*"/>
+            <RowDefinition Height="0.35*"/>
          </Grid.RowDefinitions>
 
          <Grid Grid.Column="1" Grid.Row="1">
@@ -39,13 +38,11 @@
                VerticalAlignment="Center" FontSize="18" />
          <TextBlock Name="VersionLbl" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center"
                VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="KeyLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
-               VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
+         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
                VerticalAlignment="Center" FontSize="12" />
-         <TextBox Name="InfoLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Stretch"
+         <TextBox Name="InfoLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Stretch"
                VerticalAlignment="Stretch" FontSize="12" IsReadOnly="true" TextWrapping="Wrap"/>
-         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="9" IsCancel="True"
+         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="8" IsCancel="True"
             Margin="1,0"/>
 
       </Grid>

AboutBoxWindow/AboutBoxV.xaml.vb

@@ -9,17 +9,36 @@ Public Class AboutBoxV
                                  "." & My.Application.Info.Version.Minor.ToString() &
                                  (ChrW(97 - 1 + My.Application.Info.Version.Build)).ToString() &
                                  My.Application.Info.Version.Revision.ToString()
+      CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
+      Dim sInfo As String = String.Empty
       Dim sKey As String = String.Empty
       EgtGetKeyInfo(sKey)
       Dim sKlev As String = IniFile.m_nKeyLevel.ToString()
       Dim sOpts As String = IniFile.m_nKeyOptions.ToString()
-      KeyLbl.Text = sKey & " - " & sKlev & " - " & sOpts
-      CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
-      Dim sInfo As String = If( EgtIsDebug(), "*** Debug Libraries ***" & vbCrLf, "")
+      Dim sLeftDays As String = ""
+      Dim nLeftDays As Integer 
+      if EgtGetKeyLeftDays( nLeftDays) AndAlso nLeftDays < 500 Then sLeftDays= " (" & nLeftDays.ToString() & ")"
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays( nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         Else If nAssLeftDays > 0 then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else  
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+      sInfo = If( EgtIsDebug(), "*** Debug Libraries ***" & vbCrLf, "")
+      sInfo &= "User " & Environment.MachineName & "\" & Environment.UserName &
+               "  Inst" & Map.refMainWindowVM.Instance().ToString() &
+               " Ulv" & IniFile.m_nUserLevel.ToString() & " Dbg" & IniFile.m_nDebug.ToString() & vbCrLf
+      sInfo &= sKey & " - " & sKlev & " - " & sOpts & vbCrLf
+      sInfo &= "SupportPlane " & sAssStatus & vbCrLf
       sInfo &= "DataRoot " & IniFile.m_sDataRoot & vbCrLf
       sInfo &= "Doors " & IniFile.m_sDoorsDirPath & vbCrLf
       If OptionModule.m_MaterialList.Count = 1 Then
-         sInfo &= "Material " & OptionModule.m_MaterialList(0).Name
+         sInfo &= "Material " & OptionModule.m_MaterialList(0).Name & vbCrLf
       End If
       Dim sOpSys As String = String.Empty
       EgtGetOsInfo( sOpSys)

Application.xaml.vb

@@ -9,10 +9,15 @@ Class Application
       MyBase.OnStartup(e)
       ShutdownMode = System.Windows.ShutdownMode.OnMainWindowClose
       ' Creo la View principale
-      Me.MainWindow = New MainWindowV
+      Me.MainWindow = New MainWindowV(e.Args)
       System.Windows.Forms.Integration.ElementHost.EnableModelessKeyboardInterop(Me.MainWindow)
-      ' Mostro la View principale
-      Me.MainWindow.Show()
+      If OptionModule.AdjustDDT Then
+         Me.MainWindow.Hide()
+      Else
+         Me.MainWindow.Show()
+      End If
+      '' Mostro la View principale
+      'Me.MainWindow.Show()
    End Sub
 
 End Class

Assembly/Assembly.vb

@@ -1045,7 +1045,15 @@ Public Class Assembly
    End Enum
 
    ' carico il valore finale restituito dalla lettura dell'assembalto (di default errore)
-   Public bOk As ResultReadingAssembInfo = ResultReadingAssembInfo.ErrorInAssembInfo
+   Private m_bOk As ResultReadingAssembInfo = ResultReadingAssembInfo.ErrorInAssembInfo
+   Public Property bOk As ResultReadingAssembInfo
+      Get
+         Return m_bOk
+      End Get
+      Set(value As ResultReadingAssembInfo)
+         m_bOk = value
+      End Set
+   End Property
 
    ' vettore di righe del file ddf in lettura
    Private FileContent() As String
@@ -1058,6 +1066,8 @@ Public Class Assembly
       If Not File.Exists(sPathDDF) Then
          Return
       End If
+      ' verifico se il file è un template 
+      Dim bIsTemplate As Boolean = (Path.GetExtension(sPathDDF).ToLower = ".ddt")
       ReadAssembly.FileContent = File.ReadAllLines(sPathDDF)
       ' se il file esiste ma è vuoto
       If ReadAssembly.FileContent.Count = 0 Then
@@ -1080,7 +1090,7 @@ Public Class Assembly
             Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nNothingSelected
          Else
             Map.refSceneManagerVM.EnableRefresh = False
-            If ReadAssembly.GetDDFDoor(IndexLine, sErrorInfo) = -1 Then
+            If ReadAssembly.GetDDFDoor(IndexLine, sErrorInfo, bIsTemplate) = -1 Then
                ' errore nella lettura di un part: blocco tutto
                ReadAssembly = Nothing
                Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified = False
@@ -1468,10 +1478,11 @@ Public Class Assembly
    End Function
 
    ' dopo la lettura delle informazioni dell'assemblato
-   Private Function GetDDFDoor(IndexLine As Integer, ByRef sErrorInfo As String) As Integer
+   Private Function GetDDFDoor(IndexLine As Integer, ByRef sErrorInfo As String, Optional ByVal bIsTemplate As Boolean = False) As Integer
       Dim Line As Integer = IndexLine
       While Line < FileContent.Count - 1 AndAlso Not Search3Dots(FileContent(Line))
          Dim Local_PartDoor As New PartDoor
+         Local_PartDoor.IsTemplate = bIsTemplate
          Dim Local_Door As New Part(Local_PartDoor)
          ' carcio la liste delle propiretà
          'CreateNewPropertiesList(Local_Door.PropertiesList, Local_Door.SelectedMaterial)
@@ -1494,7 +1505,13 @@ Public Class Assembly
                sDoorPiece = sDoorPiece.Remove(sDoorPiece.LastIndexOf("_"c) + 1)
             End If
             Map.refCompoPanelVM.GoBackVisibility = Visibility.Visible
-            Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            ' verifico che la lettura dell'assemblato sia andato a buon fine
+            If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo Then
+               ' forzo l'apertura della pagina DOOR
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nDDFPage
+            Else
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            End If
          Else
             ' significa che stiamo per leggere una porta singola, cerco una porta
             If Not Local_Door.TypePart.Contains("DO_") Then
@@ -1723,7 +1740,7 @@ Public Class Assembly
    ' controllo degli oggetti caricati nell'assemblato
    Private Function ControlAssemblyInformation() As Boolean
       Dim ErrorMessages As String = String.Empty
-      Select Case bOk
+      Select Case m_bOk
          Case ResultReadingAssembInfo.CorrectAssembInfo
             If OptionModule.m_ConfigurationSoftware = ConfigType.Door Then
                ' 50520=The current ddf is an assembly
@@ -1777,9 +1794,9 @@ Public Class Assembly
    Public Function ControlAssembly(Optional ByVal bSaving As Boolean = False) As String
       ' se è una porta singola oppure le info generali non sono state caricate correttamente non controllo l'assemblato
       If bSaving Then
-         If bOk <> ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
+         If m_bOk <> ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
       Else
-         If bOk = ResultReadingAssembInfo.ErrorInAssembInfo OrElse bOk = ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
+         If m_bOk = ResultReadingAssembInfo.ErrorInAssembInfo OrElse m_bOk = ResultReadingAssembInfo.MissingAssembInfo Then Return String.Empty
       End If
       Dim WritingError As String = String.Empty
       Dim DoorTypeList As String = String.Empty
@@ -2495,6 +2512,7 @@ Public Class Assembly
             Map.refSceneManagerVM.RefreshBtn()
 
          Case "Height"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             HeightJamb()
             HeightDoor()
             TopRabbetJamb()
@@ -2504,6 +2522,7 @@ Public Class Assembly
             UpDateAllCompo()
 
          Case "Width"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             TopBottomWidth()
             TopRabbetJamb()
             BottomRabbetJamb()
@@ -2512,10 +2531,12 @@ Public Class Assembly
             UpDateAllCompo()
 
          Case "Thickness"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             TopRabbetJamb()
             UpDateAllCompo()
 
          Case "Swing"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             UpDateCompolistOnJamb()
             SwingJamb()
             SetPartDoorCurrAssembly()
@@ -2523,6 +2544,7 @@ Public Class Assembly
             'UpDateAllCompo()
 
          Case "DoorNumber"
+            If m_bOk <> ResultReadingAssembInfo.CorrectAssembInfo Then Return
             ClearRefOnAssembly()
             SetPartDoorCurrAssembly()
             ReverseDoor()
@@ -3588,9 +3610,14 @@ Public Class Assembly
       If Not bRabbet Then
          'Map.refPartPageVM.CurrPart = Jamb
          CurrCompo = Jamb.AddNewCompo(Map.refCompoPanelVM.CompoTypeList(IndexCompoPanel), True)
-         DirectCast(CurrCompo.CompoParamList(0), ComboBoxParam).SelItem = DirectCast(CurrCompo.CompoParamList(0), ComboBoxParam).ItemList(0)
+         If Not IsNothing(CurrCompo) Then
+            DirectCast(CurrCompo.CompoParamList(0), ComboBoxParam).SelItem = DirectCast(CurrCompo.CompoParamList(0), ComboBoxParam).ItemList(0)
+         Else
+            ' 50180=Warning : {0} does not exist.
+            MessageBox.Show(String.Format(EgtMsg(50180), Map.refCompoPanelVM.CompoTypeList(IndexCompoPanel).Name & ".frame"), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
+         End If
       Else
-         CurrCompo = Jamb.CompoList(IndexCompo)
+            CurrCompo = Jamb.CompoList(IndexCompo)
       End If
       ' mofico la componete rabbet
       If Not IsNothing(CurrCompo) Then
@@ -3729,9 +3756,14 @@ Public Class Assembly
       If Not bRabbet Then
          ' lo aggiungo
          Local_Compo = Jamb.AddNewCompo(Map.refCompoPanelVM.CompoTypeList(CompoListIndex), True)
-         DirectCast(Local_Compo.CompoParamList(0), ComboBoxParam).SetSelItem(DirectCast(Local_Compo.CompoParamList(0), ComboBoxParam).ItemList(nIndexSide))
+         If Not IsNothing(Local_Compo) Then
+            DirectCast(Local_Compo.CompoParamList(0), ComboBoxParam).SetSelItem(DirectCast(Local_Compo.CompoParamList(0), ComboBoxParam).ItemList(nIndexSide))
+         Else
+            ' 50180=Warning : {0} does not exist.
+            MessageBox.Show(String.Format(EgtMsg(50180), Map.refCompoPanelVM.CompoTypeList(CompoListIndex).Name & ".frame"), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
+         End If
       Else
-         Local_Compo = Jamb.CompoList(IndexCompo)
+            Local_Compo = Jamb.CompoList(IndexCompo)
       End If
       If Not IsNothing(Local_Compo) Then
          Dim dVal1 As Double = 0

Assembly/PartDoor.vb

@@ -7,6 +7,16 @@ Imports EgtWPFLib5
 Public Class PartDoor
    Inherits VMBase
 
+   Private m_IsTemplate As Boolean = False
+   Public Property IsTemplate As Boolean
+      Get
+         Return m_IsTemplate
+      End Get
+      Set(value As Boolean)
+         m_IsTemplate = value
+      End Set
+   End Property
+
    Private m_Door As Part
    Public Property Door As Part
       Get

AssemblyManager/AssemblyManagerVM.vb

@@ -21,7 +21,7 @@ Public Class AssemblyManagerVM
    Private m_VisibilityDoorList As Visibility = Visibility.Collapsed
    Public Property VisibilityDoorList As Visibility
       Get
-            Return m_VisibilityDoorList
+         Return m_VisibilityDoorList
       End Get
       Set(value As Visibility)
          m_VisibilityDoorList = value
@@ -81,7 +81,9 @@ Public Class AssemblyManagerVM
       If OptionModule.m_ConfigurationSoftware = ConfigType.Door Then
          ' ricarico la lista completa degli swing 
          NewAssName.SelAssembly.ListPartDoor(0).Door.SwingTypeList = OptionModule.m_SwingTypeList
-         NewAssName.SelAssembly.ListPartDoor(0).Door.SetSwing(OptionModule.m_Swing)
+         If String.IsNullOrEmpty(NewAssName.SelAssembly.ListPartDoor(0).Door.Swing) Then
+            NewAssName.SelAssembly.ListPartDoor(0).Door.SetSwing(OptionModule.m_Swing)
+         End If
          DdfFile.WriteDDFPart(NewAssName.SelAssembly.ListPartDoor(0).Door, sTempFile, False, False)
          ' assegno la porte salvata nel CurrPart.ddf come porta corrente del progetto
          Map.refPartPageVM.CurrPart = NewAssName.SelAssembly.ListPartDoor(0).Door
@@ -129,35 +131,68 @@ Public Class AssemblyManagerVM
             ' 50540 = The current ddf is a part of a frame, do you want to save?
             If MessageBox.Show(EgtMsg(50540), EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
                DdfFile.SaveErrorCompo = True
-               DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, True, False)
+               Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+               DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
                DdfFile.SaveErrorCompo = False
             Else
                Return False
             End If
          Else
             DdfFile.SaveErrorCompo = True
-            DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, True, False)
+            Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+            DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
             DdfFile.SaveErrorCompo = False
          End If
       Else
-         ' se il ddf che sto leggendo è composto dal al massimo due parti significa che c'è un errore
+         ' Se il ddf che sto leggendo è composto dal al massimo due parti significa che c'è un errore
          If SavedAssName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.CorrectAssembInfo AndAlso
                SavedAssName.SelAssembly.ListPartDoor.Count < 3 Then
-            ' se sto salvando meno di tre componenti significa che mancano qualche pezzo per essere un assemblato
+            ' Se sto salvando meno di tre componenti significa che mancano qualche pezzo per essere un assemblato
             SavedAssName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo
          End If
          Dim ErrorMessage As String = SavedAssName.SelAssembly.ControlAssembly(True)
+         Dim m_MessageBoxResult As MessageBoxResult = MessageBoxResult.Cancel
          If Not String.IsNullOrEmpty(ErrorMessage) Then
-            If Not MessageBox.Show(ErrorMessage, EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
-               Return False
+            ' Richiedo di scegliere se salvare come porta singola oppure come assemblato (altrimenti annullo il salvataggio)
+            If GetMainPrivateProfileInt(S_GENERAL, K_SAVEASSINGLEDOOR, 0) <> 0 Then
+               ' 50732=Save as Assembly (YES), Single door (NO).
+               m_MessageBoxResult = MessageBox.Show(EgtMsg(50732), EgtMsg(50144), MessageBoxButton.YesNoCancel, MessageBoxImage.Warning, MessageBoxResult.No)
+               If m_MessageBoxResult = MessageBoxResult.Cancel Then
+                  ' interrompo il salvataggio
+                  Return False
+               End If
+               If m_MessageBoxResult = MessageBoxResult.Yes Then
+                  ' Procedo a sovrascrivere il file come ASSEMBALTO
+                  DdfFile.SaveErrorCompo = True
+                  DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+                  DdfFile.SaveErrorCompo = False
+               ElseIf m_MessageBoxResult = MessageBoxResult.No Then
+                  ' Procedo a sovrascrivere il file come SINGLE DOOR
+                  DdfFile.SaveErrorCompo = True
+                  Dim _IsDDF As Boolean = IsCurrentFileDDF(SavedAssName.Name)
+                  DdfFile.WriteDDFPart(SavedAssName.SelAssembly.ListPartDoor(0).Door, SavedAssName.Name, _IsDDF, False)
+                  DdfFile.SaveErrorCompo = False
+               End If
+            Else
+               ' Avviso che sto per salvare una porta singola come assemblato (altrimenti annullo il salvataggio)
+               If Not MessageBox.Show(ErrorMessage, EgtMsg(50144), MessageBoxButton.YesNo, MessageBoxImage.Warning, MessageBoxResult.No) = MessageBoxResult.Yes Then
+                  Return False
+               End If
+               ' Procedo a sovrascrivere il file
+               DdfFile.SaveErrorCompo = True
+               DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+               DdfFile.SaveErrorCompo = False
             End If
+         Else
+            ' Non ci sono errori: procedo a sovrascrivere il file
+            DdfFile.SaveErrorCompo = True
+            DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
+            DdfFile.SaveErrorCompo = False
          End If
-         DdfFile.SaveErrorCompo = True
-         DdfFile.WriteDDFAssembly(SavedAssName.SelAssembly, SavedAssName.Name, True)
-         DdfFile.SaveErrorCompo = False
+
       End If
       ' controllo che il salvataggio sia andato a buon fine
-     
+
       If bConfirmSavin Then
          SavedAssName.IsModified = False
          ' ogni progetto salvato è l'ultimo da aprire, anche se il programma è chiuso dall'HardwareManager
@@ -321,18 +356,18 @@ Public Class AssemblyManagerVM
          End Select
          Map.refMainWindowVM.selectedWatcher = MainWindowVM.WatcherCalling.NoEvents
          ' se sono in modalità hardware allora esco senza caricare l'elenco delle porte
-         If Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nHardwarePage then Return true
-'-------------------------------------------------------------------------------------------------------------------------------------------------
+         If Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nHardwarePage Then Return True
+         '-------------------------------------------------------------------------------------------------------------------------------------------------
          ' devo ricalcolare l'elenco delle porte nel progetto corrente:
-         If OptionModule.m_SingleDoor then Return True
+         If OptionModule.m_SingleDoor Then Return True
          ' calcolo l'elenco delle porte solo dopo il salvataggio della porta corrente
-         If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified then Return true
-         If Not IsNothing( Map.refAssemblyManagerVM.CurrProject) andAlso Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.Name) then
+         If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified Then Return True
+         If Not IsNothing(Map.refAssemblyManagerVM.CurrProject) AndAlso Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.Name) Then
             Dim CurrAssemblyName As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
             Map.refAssemblyManagerVM.CurrProject.AssemblyList = New ObservableCollection(Of AssemblyName)
-            Dim DDFArray()as String = Directory.GetFiles(Map.refAssemblyManagerVM.CurrProject.Name)
-            For IndexFile As Integer = 0 to DDFArray.Count - 1
-               If Path.GetExtension(DDFArray(IndexFile)) <> DDF_EXTENSION then
+            Dim DDFArray() As String = Directory.GetFiles(Map.refAssemblyManagerVM.CurrProject.Name)
+            For IndexFile As Integer = 0 To DDFArray.Count - 1
+               If Path.GetExtension(DDFArray(IndexFile)) <> DDF_EXTENSION Then
                   Continue For
                End If
                Dim NewAssembly As New AssemblyName
@@ -340,12 +375,12 @@ Public Class AssemblyManagerVM
                NewAssembly.IsModified = False
                Map.refAssemblyManagerVM.CurrProject.AssemblyList.Add(NewAssembly)
             Next
-            If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) then
+            If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
                Try
                   'Map.refAssemblyManagerVM.CurrProject = LocalCurrProject
                   'LocalCurrProject.SelAssemblyName = LocalCurrProject.AssemblyList.First(Function(x) x.Name = Local_AssemblyName.Name)
                   Map.refAssemblyManagerVM.CurrProject = Map.refAssemblyManagerVM.CurrProject
-                  Map.refAssemblyManagerVM.CurrProject.SelAssemblyName = Map.refAssemblyManagerVM.CurrProject.AssemblyList.First(Function(x) x.Name = CurrAssemblyName)    
+                  Map.refAssemblyManagerVM.CurrProject.SelAssemblyName = Map.refAssemblyManagerVM.CurrProject.AssemblyList.First(Function(x) x.Name = CurrAssemblyName)
                Catch ex As Exception
                   EgtOutLog("Aggiornamento Progetto Corrente: impossibile caricare ultima porta")
                End Try
@@ -372,8 +407,8 @@ Public Class AssemblyManagerVM
                Next
             Next
          End If
-       End If
-       Return True
+      End If
+      Return True
    End Function
 
    ' ricerca il tipo di compoente chiamato
@@ -446,7 +481,7 @@ Public Class AssemblyManagerVM
       If Not bBrandExists OrElse Not bFileExists Then
          '' se la compoenente che sto caricando era corretta
          'ErrCompo.LoadByDefault = True
-            ' se il brand non esiste, ma è selezionato
+         ' se il brand non esiste, ma è selezionato
          If Not bBrandExists Then
             ErrCompo.MissingDirectory = True
             ErrCompo.MissingFile = True
@@ -979,6 +1014,14 @@ Public Class AssemblyManagerVM
       OpenedAssName.IsModified = Part.FirstReadingEdge
       If OptionModule.m_ConfigurationSoftware = ConfigType.Door Then
          DdfFile.WriteDDFPart(OpenedAssName.SelAssembly.ListPartDoor(0).Door, sTempFile, True, False)
+         If OptionModule.AdjustDDT Then
+            DdfFile.WriteDDFPart(OpenedAssName.SelAssembly.ListPartDoor(0).Door, OptionModule.SaveFileNameFromArgs, True, False)
+            ' TERMINO TUTTO SUBITO
+            EgtOutLog("Scrittura file '.ddf' terminata")
+            EgtExit()
+            Application.Current.Shutdown(0)
+            Return True
+         End If
          ' aggiorno elenco quotature
          Map.refDimensioningPanelVM.LoadHardwareDimList()
          ExecDoors(Map.refSceneManagerVM.ProjectScene, sTempFile, False)
@@ -1004,7 +1047,16 @@ Public Class AssemblyManagerVM
          If Assembly.Refreshing Then EgtZoom(ZM.ALL)
          m_CurrProject.SelAssemblyName.SelAssembly.MatchCompo()
          m_CurrProject.SelAssemblyName.SelAssembly.UpDateAllOrigValue()
-         Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+         ' Se mancano le info per generare l'assemblato accedo direttamente alla prima porta
+         If m_CurrProject.SelAssemblyName.SelAssembly.bOk = Assembly.ResultReadingAssembInfo.MissingAssembInfo Then
+            If m_CurrProject.SelAssemblyName.SelAssembly.ListPartDoorOfDoor.Count > 0 Then
+               Map.refAssemblyPageVM.JambBtn(m_CurrProject.SelAssemblyName.SelAssembly.ListPartDoorOfDoor(0).Type)
+            Else
+               Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+            End If
+         Else
+            Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
+         End If
       End If
       ' ogni progetto salvato è l'ultimo da aprire, anche se il programma è chiuso dall'HardwareManager
       ' controllo che esiste almeno un file aperto
@@ -1072,7 +1124,7 @@ Public Class AssemblyManagerVM
 
    Public Function ManageModified() As Boolean
       ' verifico se selezionato esiste e modificato
-      If Not IsNothing (m_CurrProject) AndAlso Not IsNothing(m_CurrProject.SelAssemblyName) AndAlso m_CurrProject.SelAssemblyName.IsModified Then
+      If Not IsNothing(m_CurrProject) AndAlso Not IsNothing(m_CurrProject.SelAssemblyName) AndAlso m_CurrProject.SelAssemblyName.IsModified Then
          Dim sText As String = String.Format(EgtMsg(50109), Path.GetFileNameWithoutExtension(m_CurrProject.SelAssemblyName.Name))
          Select Case MessageBox.Show(sText, "", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
             Case MessageBoxResult.Yes
@@ -1303,7 +1355,8 @@ Public Class AssemblyManagerVM
       ' creo le Ante
       For IndexDoor As Integer = 0 To nDoorNumber - 1
          Dim Type As String = ConstGen.PART_DO_ & IndexDoor + 1
-         If IsNothing(ReserchPartDoor(Type)) Then
+         Dim _PartDoor As PartDoor = ReserchPartDoor(Type)
+         If IsNothing(_PartDoor) Then
             Dim Local_PartDoor As New PartDoor
             Local_PartDoor.Door = New Part(Local_PartDoor)
             Local_PartDoor.Door.TypePart = Type
@@ -1313,7 +1366,7 @@ Public Class AssemblyManagerVM
             'CreateNewPropertiesList(Local_PartDoor.Door.PropertiesList, Local_PartDoor.Door.SelectedMaterial)
             CurrAssembly.ListPartDoor.Add(Local_PartDoor)
          Else
-            'CurrAssembly.ListPartDoor.Add(ReserchPartDoor(Type))
+            CurrAssembly.ListPartDoor.Add(_PartDoor)
          End If
       Next
 
@@ -1610,7 +1663,7 @@ Public Class AssemblyManagerVM
          SaveFileDialog.FileName &= DDF_EXTENSION
       End If
       ' verifico che non sia bloccato (in fase di creazione di una nuova porta posso avere il file .lck senza il ddf)
-      If Utility.IsFileLocked(Path.GetDirectoryName(SaveFileDialog.FileName), Path.GetFileNameWithoutExtension(SaveFileDialog.FileName)) then
+      If Utility.IsFileLocked(Path.GetDirectoryName(SaveFileDialog.FileName), Path.GetFileNameWithoutExtension(SaveFileDialog.FileName)) Then
          If Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
             Utility.OutLog("Apertura progetto : " & Map.refAssemblyManagerVM.CurrProject.Name)
             Utility.LockDir(Map.refAssemblyManagerVM.CurrProject.Name, Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.GraphicName)
@@ -1654,7 +1707,7 @@ Public Class AssemblyManagerVM
       ' aggiorno la lista
       '------------------------------------------------------------------------------------------------------------------------------------------------
       ' LETTURA DI UN FILE DI TIPO TEMPLATE
-      If ImportTemplate(sImportTemplate) Then 
+      If ImportTemplate(sImportTemplate) Then
          Utility.OutLog("Apertura progetto : " & Local_AssemblyName.Name)
          Utility.LockDir(Path.GetDirectoryName(Local_AssemblyName.Name), Path.GetFileNameWithoutExtension(Local_AssemblyName.Name))
          '  carico il nome come Assemblato selezionato

AssemblyManager/AssemblyName.vb

@@ -17,6 +17,16 @@ Public Class AssemblyName
       End Set
    End Property
 
+   Private m_OrigTemplate As String = String.Empty
+   Public Property OrigTemplate As String
+      Get
+         Return m_OrigTemplate
+      End Get
+      Set(value As String)
+         m_OrigTemplate = value
+      End Set
+   End Property
+
    Private m_IsModified As Boolean
    Public Property IsModified As Boolean
       Get

CompoPanel/CompoPanelVM.vb

@@ -225,6 +225,8 @@ Public Class CompoPanelVM
                Map.refAssemblyPageVM.CurrAssembly.CreateCompoOnJamb(NewCompo, "")
             End If
             Map.refSceneManagerVM.RefreshBtn()
+            ' evidenzio componente
+            Map.refPartPageVM.CurrPart.MarkCompoInScena()
          Else
             MessageBox.Show(EgtMsg(50108), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Exclamation)
          End If

Constants/ConstGen.vb

@@ -23,6 +23,9 @@ Module ConstGen
    Public Const LIC_FILE_NAME As String = "EgtDOORCreator.lic"
    Public Const S_LICENCE As String = "Licence"
    Public Const K_KEY As String = "Key"
+   Public Const K_NETKEY As String = "NetKey"
+   Public Const K_LOCKID As String = "LockId"
+   Public Const K_NESTKEY As String = "NestKey"
 
    ' File di log generale
    Public Const GENLOG_FILE_NAME As String = "EgtDOORCreatorLog#.txt"
@@ -33,7 +36,9 @@ Module ConstGen
    Public Const CONF_DIR As String = "Config"
    ' Sottodirettorio delle risorse
    Public Const RES_DIR As String = "Resources"
-    ' Sottodirettorio temporaneo
+   ' Sottodirettorio degli scripts lua
+   Public Const SCRIPT_DIR As String = "Scripts"
+   ' Sottodirettorio temporaneo
    Public Const TEMP_DIR As String = "Temp"
    ' Sottodirettorio di default per il salvataggio con nome
    Public Const SAVE_DFL_NAMEDIR As String = "MyProjects"

Constants/ConstIni.vb

@@ -42,6 +42,7 @@ Module ConstIni
    Public Const K_EGTCAMEXE As String = "EgtCam5Exe"
    Public Const K_REFRESHTIME As String = "RefreshTime"
    Public Const K_DDFVERSION As String = "DDFVersion"
+   Public Const K_SAVEASSINGLEDOOR As String = "SaveAsSingleDoor"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -90,7 +91,8 @@ Module ConstIni
    Public Const K_DDFFUNCTION As String = "DdfFun"
    Public Const K_MYPROJECTDIR As String = "ProjectDirectory"
    Public Const K_TEMPLATEDIR As String = "TemplateDirectory"
-   Public Const K_MACHINDIR As String = "MachinDirectory"
+   ' Correzione nome Chiave valore ver 2.6k2 "MachineDirectory"
+   Public Const K_MACHINDIR As String = "MachineDirectory"
    Public Const K_MTABLE As String = "MTable"
 
    Public Const S_REPORT As String = "Report"
@@ -103,6 +105,9 @@ Module ConstIni
    Public Const K_LAUNCHER As String = "Launcher"
    Public Const K_LASTPROJECT As String = "LastProject"
 
+   Public Const S_SPECIAL As String = "Special"
+   Public Const K_SPECIALENABLE As String = "SpecialEnable"
+
    '-------------------------------------------------------------------------
    Public Const DEFAULT_INI_FILE_NAME As String = "Default.ini"
 

DdfFile.vb

@@ -64,6 +64,10 @@ Friend Module DdfFile
       Dim Config As String = IniFile.m_sDoorsDirPath
       Config = Path.GetFileName(Config)
       DdfFileContent.Add("#Config: " & Config)
+      ' versione 2.6g1: salvo il nome del template da cui è genetato il file corrente
+      If Not String.IsNullOrEmpty(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.OrigTemplate) Then
+         DdfFileContent.Add("#OrigTemplate: " & Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.OrigTemplate)
+      End If
       If Not IsNothing(Part.TypePart) Then
          DdfFileContent.Add("#" & PrintTitleDDFPart(Part.TypePart))
       End If
@@ -981,7 +985,7 @@ Friend Module DdfFile
             z = DoubleToString(-dDeltaThickness + dDeltaBottom, 4)
          End If
       End If
-         Return z
+      Return z
    End Function
 
 #End Region    ' Funzioni per il posizionamento
@@ -1077,10 +1081,32 @@ Friend Module DdfFile
       Return True
    End Function
 
-   Private Function AscendingOrder(List As ObservableCollection(Of Compo), DdfFileContent As List(Of String), bIsDDF As Boolean) As Boolean
+   ' ritorna una lista con tutti i compo dello stesso tipo
+   Public Function GetCurrentListSameCompoType(ByVal ListCompo As ObservableCollection(Of Compo), sCompoTypeDDF As String) As ObservableCollection(Of Compo)
+      Dim TempList As New ObservableCollection(Of Compo)
+      For Index As Integer = 0 To ListCompo.Count - 1
+         If ListCompo(Index).CompoType.DDFName = sCompoTypeDDF Then
+            TempList.Add(ListCompo(Index))
+         End If
+      Next
+      Return TempList
+   End Function
+
+   ' ritorna una lista con tutti i compo dello stesso tipo con lo stesso nome
+   Public Function GetCurrentListSameCompoDDFName(ByVal ListCompo As ObservableCollection(Of Compo), sSelFile As String, sSelBrand As String) As ObservableCollection(Of Compo)
+      Dim TempList As New ObservableCollection(Of Compo)
+      For Index As Integer = 0 To ListCompo.Count - 1
+         If ListCompo(Index).SelFile = sSelFile And ListCompo(Index).SelBrandPart = sSelBrand Then
+            TempList.Add(ListCompo(Index))
+         End If
+      Next
+      Return TempList
+   End Function
+
+   ' data la lista compo dello stesso tipo, la riordino ( Config.ini → TidyLayer = ...)
+   Public Sub GetOrderedListSameCompo(ByRef List As ObservableCollection(Of Compo))
       Dim tidyParamIndex1 As Integer = -1
       Dim tidyParamIndex2 As Integer = -1
-      Dim WritingError As String = String.Empty
       If List.Count >= 2 Then
          For IndexList1 As Integer = 0 To List.Count - 2
             For IndexList2 As Integer = IndexList1 + 1 To List.Count - 1
@@ -1113,6 +1139,66 @@ Friend Module DdfFile
             Next
          Next
       End If
+   End Sub
+
+   ' rercupera indice nella lista corrente della componente passata
+   Public Function GetIndexInList(ListCompo As ObservableCollection(Of Compo), SelCompo As Compo) As Integer
+      ' Se sono qui allora i compo devono avere lo stesso nome?.. Mettere controllo..
+      Dim bFoundSelCompo As Boolean = True
+      For Ind As Integer = 0 To ListCompo.Count - 1
+         For Ind2 As Integer = 0 To ListCompo(Ind).CompoParamList.Count - 1
+            ' verifco che gli oggetti abbiano lo stesso nome?.. Metter controllo..
+            If TypeOf ListCompo(Ind).CompoParamList(Ind2) Is TextBoxOnOffParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is TextBoxOnOffParam Then
+               Dim Temp As TextBoxOnOffParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), TextBoxOnOffParam)
+               Dim SelTemp As TextBoxOnOffParam = DirectCast(SelCompo.CompoParamList(Ind2), TextBoxOnOffParam)
+               If Temp.Value <> SelTemp.Value Or Temp.IsActive <> SelTemp.IsActive Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is TextBoxParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is TextBoxParam Then
+               Dim Temp As TextBoxParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), TextBoxParam)
+               Dim SelTemp As TextBoxParam = DirectCast(SelCompo.CompoParamList(Ind2), TextBoxParam)
+               If Temp.Value <> SelTemp.Value Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is ComboBoxOnOffParam And
+               TypeOf SelCOmpo.CompoParamList(Ind2) Is ComboBoxOnOffParam Then
+               Dim Temp As ComboBoxOnOffParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), ComboBoxOnOffParam)
+               Dim SelTemp As ComboBoxOnOffParam = DirectCast(SelCompo.CompoParamList(Ind2), ComboBoxOnOffParam)
+               If Temp.SelItem <> SelTemp.SelItem Or Temp.IsActive <> SelTemp.IsActive Then
+                  bFoundSelCompo = False
+               End If
+            ElseIf TypeOf ListCompo(Ind).CompoParamList(Ind2) Is ComboBoxParam And
+               TypeOf SelCompo.CompoParamList(Ind2) Is ComboBoxParam Then
+               Dim Temp As ComboBoxParam = DirectCast(ListCompo(Ind).CompoParamList(Ind2), ComboBoxParam)
+               Dim SelTemp As ComboBoxParam = DirectCast(SelCompo.CompoParamList(Ind2), ComboBoxParam)
+               If Temp.SelItem <> SelTemp.SelItem Then
+                  bFoundSelCompo = False
+               End If
+            Else
+               ' le componeti non sono dello stesso tipo!
+               Return -1
+            End If
+            ' verifico che il parametro corrente è uguale a quello della compo selezionata
+            If Not bFoundSelCompo Then
+               Exit For
+            End If
+         Next
+         ' verifico se ho trovato la compo
+         If Not bFoundSelCompo Then
+            bFoundSelCompo = True
+         Else
+            Return Ind
+         End If
+      Next
+      ' se esco senza aver trovato niente 
+      Return -1
+   End Function
+
+   Private Function AscendingOrder(List As ObservableCollection(Of Compo), DdfFileContent As List(Of String), bIsDDF As Boolean) As Boolean
+      Dim WritingError As String = String.Empty
+      GetOrderedListSameCompo(List)
       ' stampa lista 
       DdfFileContent.AddRange(GenerateCompolistDDF(List(0), WritingError, True, bIsDDF))
       For IndexItem As Integer = 1 To List.Count - 1

DoorParameters/Compo.vb

@@ -10,11 +10,7 @@ Module Modified
          Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified = True
          If Not IsNothing(Map.refPartPageVM) AndAlso Not IsNothing(Map.refPartPageVM.CurrPart) Then
             For Each Compo In Map.refPartPageVM.CurrPart.CompoList
-               Compo.BorderColor = DirectCast(New BrushConverter().ConvertFrom("#DCDCDC"), SolidColorBrush)
-               Compo.BackGroundColor = DirectCast(New BrushConverter().ConvertFrom("#FFFFFF"), SolidColorBrush)
-               Compo.Foreground = DirectCast(New BrushConverter().ConvertFrom("#000000"), SolidColorBrush)
-               Compo.BorderThickness = 1
-               Compo.FontBold = FontWeights.Normal
+               Compo.ResetMark()
             Next
          End If
       Else
@@ -111,6 +107,32 @@ Public Class Compo
       End Set
    End Property
 
+   Public Sub ResetMark()
+      m_BorderColor = DirectCast(New BrushConverter().ConvertFrom("#DCDCDC"), SolidColorBrush)
+      m_BackGroundColor = Brushes.White
+      m_Foreground = Brushes.Black
+      m_BorderThickness = 1
+      m_FontBold = FontWeights.Normal
+      NotifyPropertyChanged("BorderColor")
+      NotifyPropertyChanged("BackGroundColor")
+      NotifyPropertyChanged("Foreground")
+      NotifyPropertyChanged("BorderThickness")
+      NotifyPropertyChanged("FontBold")
+   End Sub
+
+   Public Sub SetMark()
+      m_BorderColor = DirectCast(New BrushConverter().ConvertFrom("#FF4D84C4"), SolidColorBrush)
+      m_BackGroundColor = DirectCast(New BrushConverter().ConvertFrom("#FFFFFFFF"), SolidColorBrush)
+      m_Foreground = DirectCast(New BrushConverter().ConvertFrom("#FF4D84C4"), SolidColorBrush)
+      m_BorderThickness = 2
+      m_FontBold = FontWeights.Bold
+      NotifyPropertyChanged("BorderColor")
+      NotifyPropertyChanged("BackGroundColor")
+      NotifyPropertyChanged("Foreground")
+      NotifyPropertyChanged("BorderThickness")
+      NotifyPropertyChanged("FontBold")
+   End Sub
+
 #End Region    ' Colori GroupBox
 
 #Region "CompoRef"

DoorParameters/Part.vb

@@ -2,6 +2,7 @@
 Imports System.ComponentModel
 Imports System.IO
 Imports EgtUILib
+Imports EgtWPFLib5
 Imports System.Text.RegularExpressions
 
 Public Class Part
@@ -1196,6 +1197,7 @@ Public Class Part
       End Get
       Set(value As Compo)
          m_SelCompo = value
+         MarkCompoInScena()
       End Set
    End Property
 
@@ -1505,6 +1507,58 @@ Public Class Part
 
 #End Region    'AddCompo
 
+#Region "Selection compo"
+
+   Public Sub ResetAllMark()
+      Dim nIdFirstPart As Integer = EgtGetFirstPart()
+      Dim nIdLay As Integer = EgtGetFirstLayer(nIdFirstPart)
+      While nIdLay <> GDB_ID.NULL
+         EgtResetMark(nIdLay)
+         nIdLay = EgtGetNextLayer(nIdLay)
+      End While
+      For Each ItemCompo As Compo In CompoList
+         ItemCompo.ResetMark()
+      Next
+   End Sub
+
+   Public Sub MarkCompoInScena()
+      If IsNothing(m_SelCompo) Then Return
+      If GetMainPrivateProfileInt(S_GENERAL, "MarkCompo", 0) = 0 Then Return
+      ResetAllMark()
+      ' recupero la lista dei compo dello stesso tipo
+      Dim TempList As ObservableCollection(Of Compo) = DdfFile.GetCurrentListSameCompoType(m_CompoList, m_SelCompo.CompoType.DDFName)
+      ' recupero la lista dei compo con lo stesso nome
+      TempList = DdfFile.GetCurrentListSameCompoDDFName(TempList, m_SelCompo.SelFile, m_SelCompo.SelBrandPart)
+      ' riordino la lista appena trovata secondo le regole di stampa DDF
+      DdfFile.GetOrderedListSameCompo(TempList)
+      ' ontengo la posizione prevista nella grafica
+      Dim IndexInList As Integer = DdfFile.GetIndexInList(TempList, m_SelCompo)
+      ' recupero la lista ordinata
+      Dim sCompoName As String = m_SelCompo.TemplateSelItem
+      ' recupero il primo part disponibile
+      Dim nIdFirstPart As Integer = EgtGetFirstPart()
+      Dim nIdLay As Integer = EgtGetFirstLayer(nIdFirstPart)
+      Dim IndexLay As Integer = 0
+      While nIdLay <> GDB_ID.NULL
+         Dim sInfoPath As String = String.Empty
+         If EgtGetInfo(nIdLay, "Path", sInfoPath) Then
+            Dim sNamePath As String = sInfoPath
+            If sNamePath.Contains(sCompoName) And IndexLay = IndexInList Then
+               EgtSetMark(nIdLay)
+               m_SelCompo.SetMark()
+               Exit While
+            ElseIf sNamePath.Contains(sCompoName) And IndexLay < IndexInList Then
+               IndexLay = IndexLay + 1
+            End If
+         End If
+         nIdLay = EgtGetNextLayer(nIdLay)
+      End While
+
+      EgtDraw()
+   End Sub
+
+#End Region
+
 #Region "RemoveCompo"
 
    Friend Sub RemoveCompo(CompoToRemove As Compo, Optional OnlyOnJamb As Boolean = False)
@@ -1818,6 +1872,7 @@ Public Class Part
       ' Messaggi di errore generici, se la stringa dei messaggi contiene delle informazioni allora visualizzo
       If Not String.IsNullOrWhiteSpace(sErrorInfo) Then
          Dim sTitle As String = EgtMsg(50101)
+         If Not IsNothing(ReadDoor) AndAlso Not IsNothing(ReadDoor.TypePart) Then sTitle &= ReadDoor.TypePart.ToString
          ' 50541 = {0} in reading {1}.
          If Not IsNothing(ReadDoor) Then String.Format(EgtMsg(50541), sTitle, ReadDoor.TypePart)
          MessageBox.Show(sErrorInfo, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
@@ -1983,6 +2038,9 @@ Public Class Part
       If Index > FileContent.Count() - 1 Then Return -1
       Dim sLine As String = RemoveComment(FileContent(Index))
       Dim Width As String = GetValueWithKey(sLine, K_WIDTH)
+      If m_refPartDoor.IsTemplate And OptionModule.AdjustDDT Then
+         Width = OptionModule.m_Width
+      End If
       If String.IsNullOrWhiteSpace(Width) Then
          If Not SearchKey(sLine, K_WIDTH) Then Return -1
          ' altrimenti 
@@ -2000,6 +2058,9 @@ Public Class Part
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       Dim Height As String = GetValueWithKey(sLine, K_HEIGHT)
+      If m_refPartDoor.IsTemplate And OptionModule.AdjustDDT Then
+         Height = OptionModule.m_Height
+      End If
       If String.IsNullOrWhiteSpace(Height) Then
          If Not SearchKey(sLine, K_HEIGHT) Then Return -1
          ' altrimenti 
@@ -2017,6 +2078,9 @@ Public Class Part
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       Dim Thickness As String = GetValueWithKey(sLine, K_THICKNESS)
+      If m_refPartDoor.IsTemplate And OptionModule.AdjustDDT Then
+         Thickness = OptionModule.m_Thickness
+      End If
       If String.IsNullOrWhiteSpace(Thickness) Then
          If Not SearchKey(sLine, K_THICKNESS) Then Return -1
          ' altrimenti 
@@ -2108,6 +2172,10 @@ Public Class Part
          MessageBox.Show(String.Format(EgtMsg(50141), ConstIni.K_SWING_INI) & EgtMsg(50159), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
       Else
          ' carico il valore nella porta corrente
+         If m_refPartDoor.IsTemplate And OptionModule.AdjustDDT AndAlso Not String.IsNullOrEmpty(OptionModule.ForcesSideSwing) Then
+            Swing = Swing.Remove(0, 1)
+            Swing = OptionModule.ForcesSideSwing & Swing
+         End If
          m_Swing = Swing
          OptionModule.SetCurrSwing(m_SwingAlias, m_Swing)
          If IsNothing(m_SwingAlias) Then Return -1
@@ -3360,6 +3428,7 @@ Public Class Part
 
    ' utilizzata per generare la porta/jamb dell'Hardware
    Sub New(Hardware As String)
+
       If Not String.IsNullOrEmpty(Hardware) Then
          Me.m_Width = OptionModule.m_WidthJamb
          Me.m_Height = OptionModule.m_Height
@@ -3393,10 +3462,78 @@ Public Class Part
          Me.TypePart = ConstGen.PART_FRAME_LEFT
          Return
       End If
-      Me.m_Width = OptionModule.m_Width
-      Me.m_Height = OptionModule.m_Height
-      Me.m_Thickness = OptionModule.m_Thickness
-      Me.SetSwing(OptionModule.m_Swing)
+
+      Dim bCLoneDoor As Boolean = (GetMainPrivateProfileInt(S_GENERAL, "CloneDoor", 0) = 1)
+      ' Se abilitato in file Ini "DoorClone" allora verifico se esiste una porta corrente
+      If bCLoneDoor And Not IsNothing(Map.refAssemblyManagerVM) AndAlso Not IsNothing(Map.refAssemblyManagerVM.CurrProject) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly) AndAlso
+         Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor) Then
+         ' Se presente una sola anta
+         Dim nPartDoor As Integer = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count
+         If nPartDoor = 1 Then
+            Dim LocalPartDoor As PartDoor = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0)
+            If Not IsNothing(LocalPartDoor.Door) Then
+               Me.m_Width = LocalPartDoor.Door.m_Width
+               Me.m_Height = LocalPartDoor.Door.m_Height
+               Me.m_Thickness = LocalPartDoor.Door.m_Thickness
+               Me.SetSwing(LocalPartDoor.Door.m_Swing)
+               Me.SetLockEdgeType(New EdgeType(LocalPartDoor.Door.LockEdgeType.Name, Visibility.Visible))
+               Me.SetHingeEdgeType(New EdgeType(LocalPartDoor.Door.HingeEdgeType.Name, Visibility.Visible))
+               Me.SetTopType(New EdgeType(LocalPartDoor.Door.TopType.Name, Visibility.Visible))
+               Me.SetBottomType(New EdgeType(LocalPartDoor.Door.BottomType.Name, Visibility.Visible))
+            Else
+               ' Devo usare i parametri di default
+               Me.m_Width = OptionModule.m_Width
+               Me.m_Height = OptionModule.m_Height
+               Me.m_Thickness = OptionModule.m_Thickness
+               Me.SetSwing(OptionModule.m_Swing)
+               Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+               Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            End If
+
+         ElseIf nPartDoor > 1 Then
+            ' Assemblati
+            Dim WdSelPartV As New SelectPartV()
+            ' 50233=Selezione della porta, 50234=Selezione anta
+            Dim WdSelPartVM As New SelectPartVM(EgtMsg(50233), EgtMsg(50234), nPartDoor, 1)
+            WdSelPartV.DataContext = WdSelPartVM
+            WdSelPartV.ShowDialog()
+            Dim nSelection As Integer = WdSelPartVM.nSelectedIndex
+            ' Apro una finestra per chiedere quale anta usare come riferimento
+            Dim LocalPartDoor As PartDoor = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(nSelection)
+            Me.m_Width = LocalPartDoor.Door.m_Width
+            Me.m_Height = LocalPartDoor.Door.m_Height
+            Me.m_Thickness = LocalPartDoor.Door.m_Thickness
+            Me.SetSwing(LocalPartDoor.Door.m_Swing)
+            Me.SetLockEdgeType(New EdgeType(LocalPartDoor.Door.LockEdgeType.Name, Visibility.Visible))
+            Me.SetHingeEdgeType(New EdgeType(LocalPartDoor.Door.HingeEdgeType.Name, Visibility.Visible))
+            Me.SetTopType(New EdgeType(LocalPartDoor.Door.TopType.Name, Visibility.Visible))
+            Me.SetBottomType(New EdgeType(LocalPartDoor.Door.BottomType.Name, Visibility.Visible))
+         Else
+            ' Devo usare i parametri di default
+            Me.m_Width = OptionModule.m_Width
+            Me.m_Height = OptionModule.m_Height
+            Me.m_Thickness = OptionModule.m_Thickness
+            Me.SetSwing(OptionModule.m_Swing)
+            Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+            Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         End If
+      Else
+         Me.m_Width = OptionModule.m_Width
+         Me.m_Height = OptionModule.m_Height
+         Me.m_Thickness = OptionModule.m_Thickness
+         Me.SetSwing(OptionModule.m_Swing)
+         Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+         Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
+      End If
+
       If Not IsNothing(OptionModule.m_CurrMaterial) Then
          Try
             Me.SetMaterial(m_MaterialList.First(Function(x) x.Name = Trim(OptionModule.m_CurrMaterial.Name)))
@@ -3409,10 +3546,6 @@ Public Class Part
       Me.m_IsActive = True
       Me.m_Measure = ConvertMmUnitsToString(OptionModule.m_bIsMmUnit)
       Me.m_Weight = OptionModule.m_Weight
-      Me.SetLockEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetHingeEdgeType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetTopType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
-      Me.SetBottomType(New EdgeType(ConstGen.BEVEL_SQUARED, Visibility.Visible))
       Me.m_LockEdgeMachining = OptionModule.m_LockEdgeMachining
       Me.m_HingeEdgeMachining = OptionModule.m_HingeEdgeMachining
       Me.m_TopMachining = OptionModule.m_TopMachining

EgtDOORCreator.vbproj

@@ -223,6 +223,14 @@
     </Compile>
     <Compile Include="ProjectManager\ProjectManagerVM.vb" />
     <Compile Include="ProjectManager\MySaveFileDialogVM.vb" />
+    <Compile Include="ProjectManager\SelectPartV.xaml.vb">
+      <DependentUpon>SelectPartV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ProjectManager\SelectPartVM.vb" />
+    <Compile Include="ProjectManager\SpecialPanelV.xaml.vb">
+      <DependentUpon>SpecialPanelV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ProjectManager\SpecialPanelVM.vb" />
     <Compile Include="RegexFunction.vb" />
     <Compile Include="ReportInfo\ReportCompo.vb" />
     <Compile Include="SceneManager\DimensioningPanel\DimensioningPanelV.xaml.vb">
@@ -363,6 +371,14 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="ProjectManager\SelectPartV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="ProjectManager\SpecialPanelV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="SceneManager\DimensioningPanel\DimensioningPanelV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>

EgtDOORCreatorDictionary.xaml

@@ -16,6 +16,7 @@
    <EgtDOORCreator:AssemblyPageVM x:Key="AssemblyPageVM"/>
    <EgtDOORCreator:HardwarePageVM x:Key="HardwarePageVM"/>
    <EgtDOORCreator:DimensioningPanelVM x:Key="DimensioningPanelVM"/>
+   <EgtDOORCreator:SpecialPanelVM x:Key="SpecialPanelVM"/>
 
    <!--Colori predefiniti-->
    <SolidColorBrush x:Key="EgaltechBlue1" Color="#FF4D84C4" />
@@ -162,7 +163,7 @@
    <SolidColorBrush x:Key="Button.Static.Border" Color="#FF707070"/>
    <SolidColorBrush x:Key="Button.MouseOver.Background" Color="#FFBEE6FD"/>
    <SolidColorBrush x:Key="Button.MouseOver.Border" Color="#FF3C7FB1"/>
-   <SolidColorBrush x:Key="Button.Pressed.Background" Color="#FFC4E5F6"/>
+   <SolidColorBrush x:Key="Button.Pressed.Background" Color="#FF90CFEE"/>
    <SolidColorBrush x:Key="Button.Pressed.Border" Color="#FF2C628B"/>
    <SolidColorBrush x:Key="Button.Disabled.Background" Color="#FFF4F4F4"/>
    <SolidColorBrush x:Key="Button.Disabled.Border" Color="#FFADB2B5"/>

Guide/GuideV.xaml

@@ -1,19 +1,17 @@
 <EgtWPFLib5:EgtCustomWindow x:Class="GuideV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-   Title="{Binding Title}" Icon="/Resources/EgtDOOR.ico"
-   TitleBarBrush="{StaticResource EgaltechBlue1}"
-   BorderBrush="{StaticResource EgaltechBlue1}"
-   WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="True"
-   IsMinimizable="True" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
-   CloseCommand="{Binding CloseOptionsCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}"
-   Height="800" Width="1500">
-   
+                            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                            Title="{Binding Title}" Icon="/Resources/EgtDOOR.ico"
+                            TitleBarBrush="{StaticResource EgaltechBlue1}"
+                            BorderBrush="{StaticResource EgaltechBlue1}"
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="True"
+                            IsMinimizable="True" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
+                            CloseCommand="{Binding CloseOptionsCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}"
+                            Height="800" Width="1500">
 
    <DockPanel Margin="5">
       <WebBrowser x:Name="DoorBrowser"/>
    </DockPanel>
 
-   
 </EgtWPFLib5:EgtCustomWindow>

Guide/GuideV.xaml.vb

@@ -20,10 +20,10 @@ Public Class GuideV
       Dim sHelpDir As String = String.Empty
       If OptionModule.m_SmartHelp = HelpPage.LocalHost Then
          sHelpDir = IniFile.m_sHelpDir.Replace("C:", "file://127.0.0.1/c$")
-         DoorBrowser.Navigate(New Uri(sHelpDir & "\" & m_Language & "\" & GuideVM.m_AddressGuide & ".html"))
+         DoorBrowser.Source = New Uri(sHelpDir & "\" & m_Language & "\" & GuideVM.m_AddressGuide & ".html")
       ElseIf OptionModule.m_SmartHelp = HelpPage.WebBrowserVB Then
          sHelpDir = IniFile.m_sHelpDir
-         DoorBrowser.Navigate(New Uri(sHelpDir & "\" & m_Language & "\" & GuideVM.m_AddressGuide & ".html"))
+         DoorBrowser.Source = New Uri(sHelpDir & "\" & m_Language & "\" & GuideVM.m_AddressGuide & ".html")
       Else
          sHelpDir = IniFile.m_sHelpDir
          Try

HardwareManager/Hardware.vb

@@ -83,8 +83,8 @@ Public Class Hardware
          If Not IsNothing(value) Then
             m_SelBrand = value
          ElseIf Not IsNothing(value) AndAlso Not Directory.Exists(value.ModelDir) Then
-         ' 50542 = {0}: Directory does not exist!
-            ErrorReading = String.Format(EgtMsg(50542),value.ModelDir)
+            ' 50542 = {0}: Directory does not exist!
+            ErrorReading = String.Format(EgtMsg(50542), value.ModelDir)
             RefreshTemplateListEgtDOORCreator()
          Else
             Return
@@ -130,8 +130,8 @@ Public Class Hardware
                SelTemplate = String.Empty
                'Map.refSceneManagerVM.RefreshBtn()
             End If
-            Else
-               SelTemplate = String.Empty
+         Else
+            SelTemplate = String.Empty
             'Map.refSceneManagerVM.RefreshBtn()
          End If
          ' termine della selezione
@@ -530,7 +530,9 @@ Public Class Hardware
       Else
          SwingTemplate = "RH"
       End If
-      IniFile.StdTemplateGetPrivateProfileString("Hardware", "Swing", SwingTemplate, SwingTemplate)
+      If String.IsNullOrEmpty(SwingTemplate) Or Not (GetMainPrivateProfileInt(S_GENERAL, "CloneDoor", 0) = 1) Then
+         IniFile.StdTemplateGetPrivateProfileString("Hardware", "Swing", SwingTemplate, SwingTemplate)
+      End If
       Map.refHardwarePageVM.GenericPart.SetSwing(SwingTemplate)
       If bIsFrame Then
          IniFile.StdTemplateGetPrivateProfileString("Hardware", "SwingFrame", "RH", SwingTemplate)
@@ -555,17 +557,17 @@ Public Class Hardware
       If Map.refHardwarePageVM.GenericPart.CompoList.Count < 1 Then Return
       'If String.IsNullOrEmpty(HardwareGeneral.JambSide) Then
       For Each Item In Map.refHardwarePageVM.GenericPart.CompoList(0).CompoParamList
-            If TypeOf Item Is ComboBoxParam AndAlso
-               Item.DDFName = "side" Then
-               Dim CBoxPar As ComboBoxParam = DirectCast(Item, ComboBoxParam)
-               Dim IndexItem As Integer = CBoxPar.ItemList.IndexOf(CBoxPar.SelItem)
-               If IndexItem > -1 Then
-                  HardwareGeneral.SetJambSide(CBoxPar.ItemListDDF(IndexItem))
-               End If
-               'HardwareGeneral.SetJambSide(CBoxPar.SelItem)
-               Exit For
+         If TypeOf Item Is ComboBoxParam AndAlso
+            Item.DDFName = "side" Then
+            Dim CBoxPar As ComboBoxParam = DirectCast(Item, ComboBoxParam)
+            Dim IndexItem As Integer = CBoxPar.ItemList.IndexOf(CBoxPar.SelItem)
+            If IndexItem > -1 Then
+               HardwareGeneral.SetJambSide(CBoxPar.ItemListDDF(IndexItem))
             End If
-         Next
+            'HardwareGeneral.SetJambSide(CBoxPar.SelItem)
+            Exit For
+         End If
+      Next
       'End If
       If HardwareGeneral.JambSide.ToLower.Contains("hinge") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_LEFT & HINGE
@@ -581,21 +583,21 @@ Public Class Hardware
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_Height)
          End If
          Return
-         ElseIf HardwareGeneral.JambSide.ToLower.Contains("top") Then
+      ElseIf HardwareGeneral.JambSide.ToLower.Contains("top") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_TOP & TOP
          If Not HardwarePartVM.bIsSettingDoor Then
             Map.refHardwarePageVM.GenericPart.SetWidth(OptionModule.m_Width)
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_ThicknessHead)
          End If
          Return
-         ElseIf HardwareGeneral.JambSide.ToLower.Contains("bottom") Then
+      ElseIf HardwareGeneral.JambSide.ToLower.Contains("bottom") Then
          Map.refHardwarePageVM.GenericPart.TypePart = PART_FRAME_BOTTOM & BOTTOM
          If Not HardwarePartVM.bIsSettingDoor Then
             Map.refHardwarePageVM.GenericPart.SetWidth(OptionModule.m_Width)
             Map.refHardwarePageVM.GenericPart.SetHeight(OptionModule.m_ThicknessBottom)
          End If
          Return
-         End If
+      End If
 
    End Sub
 
@@ -826,7 +828,7 @@ Public Class Hardware
                End If
 
             End If
-               ParamIndex += 1
+            ParamIndex += 1
          End While    ' termina lettura del capitolo
 
          GroupChapters.Add(Chapter)
@@ -1876,7 +1878,7 @@ Public Class Hardware
          ' cerco un numero finito di parametri
          For IndexParam As Integer = 0 To IndexParamDDF - 1
             If LineIndex + ParamIndex > sFile.Count - 1 Then Return False
-            ' recuro il nome del parametro 
+            ' recupero il nome del parametro 
             KeyParam = Trim(RegexFunction.KeyParamLine(sFile(LineIndex + ParamIndex)))
             While String.IsNullOrEmpty(KeyParam) And LineIndex + ParamIndex < sFile(LineIndex + ParamIndex).Count
                ParamIndex += 1
@@ -2013,21 +2015,27 @@ Public Class Hardware
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "inch( " & Text.Value & ")"
                            End If
                         Else
                            sValue = Text.Value
-                           If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           'If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "mm( " & sValue & ")"
                         End If
                      Case ConstGen.MM
                         If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
                            sValue = Text.Value
                            InchesToMm(sValue)
+                           'sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "inch( " & sValue & ")"
                         Else
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.Value
+                              'sValue = Text.Value
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "mm( " & Text.Value & ")"
                            End If
                         End If
                   End Select
@@ -2046,21 +2054,27 @@ Public Class Hardware
                               If Text.ToolTipValue.Contains("Invalid") Then
                                  sValue = "0.0000"
                               Else
-                                 sValue = Text.TypeVar & "( " & Text.Value & ")"
+                                 'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                                 sValue = "inch( " & Text.Value & ")"
                               End If
                            Else
                               sValue = Text.Value
-                              If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                              'If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                              sValue = "mm( " & sValue & ")"
                            End If
                         Case ConstGen.MM
                            If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
                               sValue = Text.Value
                               InchesToMm(sValue)
+                              'sValue = Text.TypeVar & "( " & sValue & ")"
+                              sValue = "inch( " & sValue & ")"
                            Else
                               If Text.ToolTipValue.Contains("Invalid") Then
                                  sValue = "0.0000"
                               Else
-                                 sValue = Text.Value
+                                 'sValue = Text.Value
+                                 'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                                 sValue = "mm( " & Text.Value & ")"
                               End If
                            End If
                      End Select
@@ -2093,22 +2107,28 @@ Public Class Hardware
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "inch( " & Text.Value & ")"
                            End If
                            'sValue = Text.TypeVar & "( " & Text.ToolTipValue & ")"
                         Else
                            sValue = Text.Value
-                           If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           'If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "mm( " & sValue & ")"
                         End If
                      Case ConstGen.MM
                         If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
                            sValue = Text.Value
                            InchesToMm(sValue)
+                           'sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "inch( " & sValue & ")"
                         Else
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.Value
+                              'sValue = Text.Value
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "mm( " & Text.Value & ")"
                            End If
                            'sValue = Text.ToolTipValue
                         End If
@@ -2139,22 +2159,28 @@ Public Class Hardware
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "inch( " & Text.Value & ")"
                            End If
                            'sValue = Text.TypeVar & "( " & Text.ToolTipValue & ")"
                         Else
                            sValue = Text.Value
-                           If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           'If MmToInches(sValue) Then sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "mm( " & Text.Value & ")"
                         End If
                      Case ConstGen.MM
                         If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
                            sValue = Text.Value
                            InchesToMm(sValue)
+                           'sValue = Text.TypeVar & "( " & sValue & ")"
+                           sValue = "inch( " & Text.Value & ")"
                         Else
                            If Text.ToolTipValue.Contains("Invalid") Then
                               sValue = "0.0000"
                            Else
-                              sValue = Text.Value
+                              'sValue = Text.Value
+                              'sValue = Text.TypeVar & "( " & Text.Value & ")"
+                              sValue = "mm( " & Text.Value & ")"
                            End If
                            'sValue = Text.ToolTipValue
                         End If

IniFile.vb

@@ -13,6 +13,8 @@ Friend Module IniFile
 
    ' Livello dell'utilizzatore
    Friend m_nUserLevel As Integer = 1
+   ' Livello di debug
+   Friend m_nDebug As Integer = 0
    ' Livello della chiave inserita nel PC
    Friend m_nKeyLevel As Integer = 0
    ' Opzioni attive sulla chiave
@@ -58,9 +60,13 @@ Friend Module IniFile
    ' Path del modello ListLabel
    Friend m_sListLabelCurrent As String = String.Empty
    ' Path dell'eseguibile Cam5
-   Friend m_sEgtCameEXEPath As String = String.Empty
+   Friend m_sEgtCam5EXEPath As String = String.Empty
    ' Path LuaLibs Dir
    Friend m_sLuaLibsDir As String = String.Empty
+   ' Path ResourcesRoot
+   Friend m_sResourcesRoot As String = String.Empty
+   ' Path ScriptsRoot
+   Friend m_sScriptsRoot As String = String.Empty
 
    ' EgtDoorCreator.ini
    Public Function GetPrivateProfileLanguage(ByVal lpAppName As String, ByVal lpKeyName As String) As Language
@@ -485,4 +491,20 @@ Friend Module IniFile
       Return EgtUILib.WritePrivateProfileString(IpAppName, IpKeyName, IpString, m_sDoorsDirPath & "\MTables\GeometryNameList.ini")
    End Function
 
+   Public Function GetPrivateProfileButton(sSection As String, sKey As String, sBaseDir As String, ByRef ReadButtonItem As ButtonItem) As Boolean
+      ReadButtonItem = Nothing
+      Dim sVal As String = String.Empty
+      GetMainPrivateProfileString(sSection, sKey, "", sVal)
+      If String.IsNullOrWhiteSpace(sVal) Then Return False
+      Dim sItems() As String = sVal.Split(","c)
+      If sItems.Count() >= 1 Then
+         Dim sLuaPath As String = sItems(0)
+         Dim sImagePath As String = If(sItems.Count() >= 2, sItems(1), "")
+         Dim sToolTip As String = If(sItems.Count() >= 3, sItems(2), "")
+         ReadButtonItem = New ButtonItem(sLuaPath, sImagePath, sToolTip)
+         Return True
+      End If
+      Return False
+   End Function
+
 End Module

Launcher/LauncherV.xaml

@@ -18,7 +18,7 @@
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="2*"/>
             </Grid.ColumnDefinitions>
             <Image Grid.Column="0" Source="/Resources/TopCommandBar/Import.png" Stretch="Uniform"
                  />
@@ -31,7 +31,7 @@
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="2*"/>
             </Grid.ColumnDefinitions>
             <Image Grid.Column="0" Source="/Resources/TopCommandBar/New.png" Stretch="Uniform"
                  HorizontalAlignment="Left"/>
@@ -44,7 +44,7 @@
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="2*"/>
             </Grid.ColumnDefinitions>
             <Image Grid.Column="0" Source="/Resources/TopCommandBar/Open.png" Stretch="Uniform"
                  HorizontalAlignment="Left"/>

MainWindow/MainWindowModel.vb

@@ -12,12 +12,9 @@ Friend Class MainWindowModel
    Private m_objMutex As New Mutex
    ' Variabile che indica il numero di istanze aperte del programma
    Friend m_nInstance As Integer = 0
-
    ' Path cartella Data
    Friend m_sDataRoot As String = String.Empty
 
-   Private m_nDebug As Integer = 0
-
 #End Region
 
 #Region "CONSTRUCTOR"
@@ -33,10 +30,14 @@ Friend Class MainWindowModel
       IniFile.m_sConfigDir = m_sDataRoot & "\" & CONF_DIR
       ' Impostazione direttorio per file temporanei
       IniFile.m_sTempDir = m_sDataRoot & "\" & TEMP_DIR
+      ' Impostazione direttorio per risorse programma
+      IniFile.m_sResourcesRoot = m_sDataRoot & "\" & RES_DIR
+      ' Impostazione direttorio scripts lua
+      IniFile.m_sScriptsRoot = m_sDataRoot & "\" & SCRIPT_DIR
       ' Impostazione direttorio Ini file
       IniFile.m_sIniFile = IniFile.m_sConfigDir & "\" & INI_FILE_NAME
       ' Impostazione path Ini file
-      EgtWPFLib5.IniFile.m_sIniFile = m_sConfigDir & "\" & INI_FILE_NAME
+      EgtWPFLib5.IniFile.m_sIniFile = IniFile.m_sIniFile
       ' Impostazione direttorio della cartella Help
       IniFile.m_sHelpDir = m_sDataRoot & "\" & HELP_DIR
       ' Impostazione direttorio della cartella Template
@@ -56,11 +57,26 @@ Friend Class MainWindowModel
       Dim sKey As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_KEY, "", sKey, sLicFile)
       EgtSetKey(sKey)
+      Dim sNestKey As String = ""
+      EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
+      EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetHwKey)
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString(S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty(sLockId) Then
+         EgtSetLockId(sLockId)
+      End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2512, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2512, 1, IniFile.m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2703, 1, IniFile.m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2703, 1, IniFile.m_nKeyOptions)
+      ' Leggo e imposto livello utilizzatore
+      IniFile.m_nUserLevel = Math.Min(IniFile.m_nKeyLevel, GetMainPrivateProfileInt(S_GENERAL, K_USERLEVEL, 1))
       'Inizializzazione generale di EgtInterface
-      m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
+      IniFile.m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       Dim sLogFile As String = IniFile.m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())
       Dim sLogMsg As String = "User " & Environment.UserName & "\" & Environment.MachineName & " (" & m_nInstance.ToString() & ")" & vbLf &
                               My.Application.Info.Description.ToString() & " ver. " &
@@ -68,7 +84,7 @@ Friend Class MainWindowModel
                               "." & My.Application.Info.Version.Minor.ToString() &
                               (ChrW(97 - 1 + My.Application.Info.Version.Build)).ToString() &
                               My.Application.Info.Version.Revision.ToString()
-      EgtInit(m_nDebug, sLogFile, sLogMsg)
+      EgtInit(IniFile.m_nDebug, sLogFile, sLogMsg)
       ' Carico i messaggi
       OptionModule.ReadMessages()
       ' Carico direttorio doors

MainWindow/MainWindowV.xaml.vb

@@ -1,9 +1,27 @@
 Imports EgtWPFLib5
+Imports EgtUILib
 
 Class MainWindowV
 
+   Private m_args() As String = Nothing
+
 #Region "EVENTS"
 
+   Public Sub New(args As String())
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+      ' Per leggere più argomenti devono essere scritti ognuno tra doppi apici e separati da spazio
+      ' Esempio:"Argomento 1 di prova" "Argomento 2 di prova" 
+      EgtOutLog("   1 Numero argomenti: " & args.Length.ToString)
+      If args.Length > 0 Then
+         m_args = args
+         RunBlindCode()
+      End If
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
    Private Sub MainWindowV_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Carico e imposto posizione finestra
       WinPosFromIniToWindow(S_GENERAL, K_WINPLACE, Me)
@@ -11,19 +29,63 @@ Class MainWindowV
 
    Private Sub MainWindowV_ContentRendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
       ' se è assente la chiave di protezione non mostro la finestra Launcher
-      If Map.refSceneManagerVM.bProtectKey Then
-         Map.refMainWindowVM.SetLauncher()
-         Map.refMainWindowVM.ShowErrorCompoLoad()
-      End If
+      RunBlindCode()
    End Sub
 
    Private Sub MainWindowV_Unloaded(sender As Object, e As System.ComponentModel.CancelEventArgs) Handles Me.Closing
       ' Salvo posizione finestra (se non minimizzata)
-      If WindowState <> WindowState.Minimized Then
+      If WindowState <> WindowState.Minimized And Not OptionModule.AdjustDDT Then
          WinPosFromWindowToIni(Me, S_GENERAL, K_WINPLACE)
       End If
    End Sub
 
 #End Region    ' EVENTS
 
+   Private Sub RunBlindCode()
+      If Map.refSceneManagerVM.bProtectKey Then
+         ReadArgs()
+         Map.refMainWindowVM.SetLauncher()
+         Map.refMainWindowVM.ShowErrorCompoLoad()
+      End If
+   End Sub
+
+   ' Lettura degli argomenti e scrittura di un file di Log con i parametri caricati
+   Private Sub ReadArgs()
+      If Not IsNothing(m_args) Then
+         ' leggo gli argomenti: Il programma si chiude appena termina la scrittura del file DDF
+         Dim Items() As String = m_args(0).Split(";"c)
+         EgtOutLog("   Argomenti: " & m_args.ToString)
+         If Items.Length >= 5 Then
+            ' Avvio progetto - LauncherOpt.Open_last_project (1)
+            OptionModule.m_bLauncherOpenOnce = True
+            ' Indico il percorso del file
+            OptionModule.FileNameFromArgs = Items(0)
+            EgtOutLog("   File '.ddt' input : " & OptionModule.FileNameFromArgs)
+            ' Assegno i valore Width, Height, Thickness 
+            OptionModule.m_Width = Items(1)
+            EgtOutLog("      width : " & OptionModule.m_Width)
+            OptionModule.m_Height = Items(2)
+            EgtOutLog("      height : " & OptionModule.m_Height)
+            OptionModule.m_Thickness = Items(3)
+            EgtOutLog("      thickness : " & OptionModule.m_Thickness)
+            ' Indico il percoso di salvataggio file DDF
+            OptionModule.SaveFileNameFromArgs = Items(4)
+            EgtOutLog("   File '.ddf' output : " & OptionModule.SaveFileNameFromArgs)
+            ' Nuovo parametro da laggere per gestione Swing 
+            If Items.Length = 6 Then
+               OptionModule.ForcesSideSwing = Items(5)
+               EgtOutLog("      swing : " & OptionModule.ForcesSideSwing)
+            End If
+            ' abilito lettura dati 
+            OptionModule.AdjustDDT = True
+         Else
+            EgtOutLog("   Argomenti non conformi")
+            ' blocco lettura dati
+            OptionModule.AdjustDDT = False
+            ' TERMINO TUTTO SUBITO!
+            End
+         End If
+      End If
+   End Sub
+
 End Class

MainWindow/MainWindowVM.vb

@@ -9,6 +9,12 @@ Public Class MainWindowVM
    ' Modello del MainWindow (classe vera e propria)
    Private m_MainWindowModel As New MainWindowModel
 
+   Public ReadOnly Property Instance As Integer
+      Get
+         Return m_MainWindowModel.m_nInstance
+      End Get
+   End Property
+
    Private m_VisibilityAssemblyManager As Visibility = Visibility.Visible
    Public Property VisibilityAssemblyManager As Visibility
       Get
@@ -65,9 +71,14 @@ Public Class MainWindowVM
          Return m_SelectedPage
       End Get
       Set(value As ListPageEnum)
-         m_SelectedPage = value
-         NotifyPropertyChanged("PageControl")
-         Map.refInstrumentPanelVM.NotifyPropertyChanged("DimensionVisibility")
+         ' Verifico che sia una vera modifica
+         If m_SelectedPage <> value Then
+            m_SelectedPage = value
+            NotifyPropertyChanged("PageControl")
+            If Not IsNothing(Map.refInstrumentPanelVM) Then
+               Map.refInstrumentPanelVM.NotifyPropertyChanged("DimensionVisibility")
+            End If
+         End If
       End Set
    End Property
 
@@ -84,20 +95,20 @@ Public Class MainWindowVM
    Public ReadOnly Property PageControl As ContentControl
       Get
          If m_SelectedPage = ListPageEnum.nDDFPage Then
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If           
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_PartPage
          ElseIf m_SelectedPage = ListPageEnum.nAssemblyPage Then
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If 
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_AssemblyPage
@@ -107,11 +118,11 @@ Public Class MainWindowVM
             NotifyPropertyChanged("ProjectManagerControl")
             Return m_HardwarePage
          Else
-            If OptionModule.m_SingleDoor then
+            If OptionModule.m_SingleDoor Then
                VisibilityAssemblyManager = Visibility.Hidden
             Else
                VisibilityAssemblyManager = Visibility.Visible
-            End If 
+            End If
             NotifyPropertyChanged("AssemblyManagerControl")
             NotifyPropertyChanged("ProjectManagerControl")
             Return Nothing
@@ -137,7 +148,7 @@ Public Class MainWindowVM
 
    Public ReadOnly Property ProjectManagerControl As ContentControl
       Get
-         If m_SelectedPage <> ListPageEnum.nHardwarePage then
+         If m_SelectedPage <> ListPageEnum.nHardwarePage Then
             Return m_ProjectManager
          Else
             ProjectNameMsg = "HardwareManager"
@@ -153,6 +164,7 @@ Public Class MainWindowVM
    End Property
 
    Sub New()
+      EgtOutLog("  Creazione e inizializzazone MainWondowVM ")
       Map.SetRefMainWindowVM(Me)
       m_AssemblyPage = New AssemblyPageV
       m_AssemblyPage.DataContext = New AssemblyPageVM
@@ -166,7 +178,6 @@ Public Class MainWindowVM
       m_HardwarePage.DataContext = New HardwarePageVM
       m_AssemblyManager = New AssemblyManagerV
       m_AssemblyManager.DataContext = New AssemblyManagerVM
-      ' inserisco la scena
       m_SceneManager = New SceneManagerV
       m_SceneManager.DataContext = New SceneManagerVM
       Dim OptionsPage As OptionsVM = OptionPage
@@ -311,7 +322,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50545 = It has been deleted file: {0}, {1}.
-      Dim Message As String = String.Format(EgtMsg(50545), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50545), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnDeleted
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)
@@ -324,7 +335,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50543 = It has been renamed file: {0}, {1}.
-      Dim Message As String = String.Format(EgtMsg(50543), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50543), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnRenamed
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)
@@ -337,7 +348,7 @@ Public Class MainWindowVM
       If m_SelectedPage = ListPageEnum.nHardwarePage Then Return
       If StartReload Then Return
       ' 50544 = It has been created new file: {0}, {1}.
-      Dim Message As String =String.Format(EgtMsg(50544), e.FullPath,  e.ChangeType)
+      Dim Message As String = String.Format(EgtMsg(50544), e.FullPath, e.ChangeType)
       selectedWatcher = WatcherCalling.OnCreated
       Application.Current.Dispatcher.BeginInvoke(New Action(Sub()
                                                                RaiseEvent Er(Message, e.FullPath)
@@ -366,6 +377,10 @@ Public Class MainWindowVM
          Case LauncherOpt.Open_last_project
             ' se definito ultimo progetto, lo apro
             If GetMainPrivateProfileString(S_LAUNCHERWINDOW, K_LASTPROJECT, "", m_sLastProject) > 0 Then
+               ' se caricato il nome in avvio del programma allora sovrascrivo
+               If OptionModule.AdjustDDT Then
+                  m_sLastProject = OptionModule.FileNameFromArgs
+               End If
                Map.refProjectManagerVM.OpenLastProject()
             End If
          Case Else

Map.vb

@@ -26,6 +26,8 @@
 
    Private m_refOptionsVM As OptionsVM
 
+   Private m_refSpecialPanelVM As SpecialPanelVM
+
 #Region "Get"
 
    Public ReadOnly Property refMainWindowVM As MainWindowVM
@@ -148,6 +150,12 @@
       End Get
    End Property
 
+   Public ReadOnly Property refSpecialPanelVM As SpecialPanelVM
+      Get
+         Return m_refSpecialPanelVM
+      End Get
+   End Property
+
 #End Region    ' Get
 
 #Region "Set"
@@ -252,6 +260,11 @@
       Return Not IsNothing(m_refHardwareHelpSceneHostV)
    End Function
 
+   Friend Function SetRefSpecialPanelVM(SpecialPanelVM As SpecialPanelVM) As Boolean
+      m_refSpecialPanelVM = SpecialPanelVM
+      Return Not IsNothing(m_refSpecialPanelVM)
+   End Function
+
 #End Region    ' Set
 
 #Region "Init"

My Project/AssemblyInfo.vb

@@ -22,17 +22,17 @@ Imports System.Windows
 #End if
 #Else
 #If DEBUG Then
-<Assembly: AssemblyTitle("EgtDOORCreator Debug 32 bit")> 
-<Assembly: AssemblyDescription("EgtDOORCreatorD32.exe")>
+<Assembly: AssemblyTitle("EgtDOORCreatorD32.exe")> 
+<Assembly: AssemblyDescription("EgtDOORCreator Debug 32 bit")>
 #Else
-<Assembly: AssemblyTitle("EgtDOORCreator Release 32 bit")> 
-<Assembly: AssemblyDescription("EgtDOORCreatorR32.exe")> 
+<Assembly: AssemblyTitle("EgtDOORCreatorR32.exe")> 
+<Assembly: AssemblyDescription("EgtDOORCreator 32 bit")> 
 #End If
 #End If
 
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtDOORCreator")>
-<Assembly: AssemblyCopyright("Copyright ©  2016-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2016-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 
@@ -72,5 +72,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.7.3.3")>
+<Assembly: AssemblyFileVersion("2.7.3.3")>

OptionsWindow/OptionModule.vb

@@ -7,6 +7,16 @@ Friend Module OptionModule
    ' flag per modalità di visualizzazione file (solo lettura)
    Friend ReadOnlyDDF As Boolean = False
 
+   ' gestione bottoni nella barra SpecialPanel
+   Friend IsActiveSpecialPanel As Boolean = False
+
+   ' flag per forzare l'aggiornamento delle dimensioni anta dei file DDT
+   Friend AdjustDDT As Boolean = False
+   Friend FileNameFromArgs As String = String.Empty
+   Friend SaveFileNameFromArgs As String = String.Empty
+   ' Forza la scrittura dello swing Left(L..) oppure Right(R..)
+   Friend ForcesSideSwing As String = String.Empty
+
    ' Parametri che contengono lista delle lingue disponibili e lingua selezionata
    Friend m_LanguageList As New ObservableCollection(Of Language)
    Friend m_SelectedLanguage As Language
@@ -326,7 +336,7 @@ Friend Module OptionModule
       Dim sEgtCam5EXE As String = String.Empty
       ' AndAlso File.Exists(sListLabelFile)
       If GetMainPrivateProfileString(S_GENERAL, K_EGTCAMEXE, "", sEgtCam5EXE) > 0 Then
-         IniFile.m_sEgtCameEXEPath = sEgtCam5EXE
+         IniFile.m_sEgtCam5EXEPath = sEgtCam5EXE
       End If
 
       Dim nHelpSelct As Integer = 0
@@ -434,19 +444,19 @@ Friend Module OptionModule
 
       Dim Width As String = String.Empty
       DefaultGetPrivateProfileString(S_SIZE_INI, K_WIDTH_INI, "32", Width)
-      Utility.ConvertCompoConfig(Width, 500)
+      Utility.ConvertCompoConfig(Width, 9999)
       m_Width = Width
       Dim dWidth As Double
       If StringToDouble(m_Width, dWidth) Then EgtLuaSetGlobNumVar("W", dWidth)
       Dim Height As String = String.Empty
       DefaultGetPrivateProfileString(S_SIZE_INI, K_HEIGHT_INI, "80", Height)
-      Utility.ConvertCompoConfig(Height, 500)
+      Utility.ConvertCompoConfig(Height, 9999)
       m_Height = Height
       Dim dHeight As Double
       If StringToDouble(m_Height, dHeight) Then EgtLuaSetGlobNumVar("H", dHeight)
       Dim Thickness As String = String.Empty
       DefaultGetPrivateProfileString(S_SIZE_INI, K_THICKNESS_INI, "1.75", Thickness)
-      Utility.ConvertCompoConfig(Thickness, 100)
+      Utility.ConvertCompoConfig(Thickness, 9999)
       m_Thickness = Thickness
       Dim dThickness As Double
       If StringToDouble(m_Thickness, dThickness) Then EgtLuaSetGlobNumVar("T", dThickness)
@@ -770,6 +780,9 @@ Friend Module OptionModule
       DefaultGetPrivateProfileString(S_OVERMATERIALASSEMBLY, K_BOTTOMOVERMATERIAL_INI, "0", BottomOverMaterialAss)
       Utility.ConvertCompoConfig(BottomOverMaterialAss, 100)
       m_BottomOverMaterialAssembly = BottomOverMaterialAss
+      ' Visualizzazione SpecialPanel
+      Dim btDummy As ButtonItem = Nothing
+      IsActiveSpecialPanel = GetMainPrivateProfileInt(S_SPECIAL, K_SPECIALENABLE, 0) <> 0 AndAlso GetPrivateProfileButton(S_SPECIAL, K_BUTTON & "1", "", btDummy)
 
       ' Lista messaggi per launcher
       m_OptionLauncherList.Add(EgtMsg(50206))       'Open Window
@@ -1050,13 +1063,13 @@ Friend Module OptionModule
          Return False
       End If
       Dim Items As String() = Directory.GetFiles(sMTableDir)
-      ' recupero i file che hanno estemsione *.mtl
+      ' recupero i file che hanno estemsione *.mtl e non sono esclusi
+      Dim ExcludeList As List(Of String) = GetExludeList()
       For Each MTableFile As String In Items
          If MTableFile.EndsWith(".mtl") Then
             Dim sName As String = Path.GetFileNameWithoutExtension(MTableFile).ToLower
             Dim sPath As String = MTableFile
             Dim bIsValid As Boolean = True
-            Dim ExcludeList As List(Of String) = GetExludeList()
             For Each ExcludedItem As String In ExcludeList
                If sName.ToLower.Contains(ExcludedItem) Then
                   bIsValid = False
@@ -1076,17 +1089,17 @@ Friend Module OptionModule
       End If
       ' leggo il nome della MTable attiva
       Dim sSelectedMTable As String = String.Empty
-      Dim nbSelected As Boolean = False
+      Dim bSelected As Boolean = False
       If GetMainPrivateProfileString(S_DOORS, K_MTABLE, "", sSelectedMTable) <> 0 Then
          For Each ItemFile As MTable In m_MTableList
             If ItemFile.FilePath.ToLower = sSelectedMTable.Trim.ToLower Then
                m_SelectedMTable = ItemFile
-               nbSelected = True
+               bSelected = True
                Exit For
             End If
          Next
       End If
-      If Not nbSelected Then m_SelectedMTable = m_MTableList(0)
+      If Not bSelected Then m_SelectedMTable = m_MTableList(0)
       Return True
    End Function
 
@@ -1094,10 +1107,12 @@ Friend Module OptionModule
       Dim LocalList As New List(Of String)
       Dim sVal As String = String.Empty
       GetMainPrivateProfileString(S_DOORS, "Exclude", "", sVal)
-      Dim sItems As String() = sVal.Split(","c)
-      For Each Item As String In sItems
-         LocalList.Add(Item.Trim)
-      Next
+      If Not String.IsNullOrWhiteSpace( sVal) Then
+         Dim sItems As String() = sVal.Split(","c)
+         For Each Item As String In sItems
+            LocalList.Add(Item.Trim)
+         Next
+      End If
       Return LocalList
    End Function
 

OptionsWindow/OptionsViewModel.vb

@@ -122,7 +122,7 @@ Public Class OptionsVM
 
    Public ReadOnly Property EnableConfig As Boolean
       Get
-         If GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0) > 4 And File.Exists(IniFile.m_sConfigDir & "\ChangeConfig.lua") Then
+         If IniFile.m_nUserLevel > 4 AndAlso File.Exists(IniFile.m_sConfigDir & "\ChangeConfig.lua") Then
             Return True
          Else
             Return False
@@ -2065,35 +2065,38 @@ Public Class OptionsVM
             OptionsWindow.Close()
          End If
       Next
-
-      If EnableConfig AndAlso m_IsChangedConfig Then
-         ' Se modifico il direttorio Compo: aggiorno il file Config.ini dell'EgtCAM5
-         EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
-         ' assegno variabili
-         EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
-         EgtLuaSetGlobStringVar("CCD.NewMTable", OptionModule.m_SelectedMTable.Name)
-         ' eseguo la funzione che esegue la scrittura delle variabili
-         EgtLuaCallFunction("CCD.ChangeConfigDirectory")
-         Dim sVal As String = ""
-         EgtLuaGetGlobStringVar("CCD.NewMachineName", sVal)
-         OptionModule.m_CurrentMachine = sVal
-         EgtLuaResetGlobVar("CCD")
-         ' chiudo il programma e lo riavvio 
-         Map.refMainWindowVM.CloseApplication()
-         Process.Start(Application.ResourceAssembly.Location)
-         'End If
-      ElseIf EnableConfig AndAlso m_OrigMTable <> OptionModule.m_SelectedMTable.Name Then
-         ' aggiorno il file Config.ini dell'EgtCAM5
-         EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
-         ' assegno variabili
-         EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
-         EgtLuaSetGlobStringVar("CCD.NewMTable", OptionModule.m_SelectedMTable.Name)
-         ' eseguo la funzione che esegue la scrittura delle variabili
-         EgtLuaCallFunction("CCD.ChangeConfigDirectory")
-         Dim sVal As String = ""
-         EgtLuaGetGlobStringVar("CCD.NewMachineName", sVal)
-         OptionModule.m_CurrentMachine = sVal
-         EgtLuaResetGlobVar("CCD")
+      ' Se abilitata modifica configurazione
+      If EnableConfig Then
+         ' Se cambiato direttorio Doors
+         If m_IsChangedConfig Then
+            ' Se modifico il direttorio Compo: aggiorno il file Config.ini dell'EgtCAM5
+            EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
+            ' assegno variabili
+            EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
+            EgtLuaSetGlobStringVar("CCD.NewMTable", OptionModule.m_SelectedMTable.Name)
+            ' eseguo la funzione che esegue la scrittura delle variabili
+            EgtLuaCallFunction("CCD.ChangeConfigDirectory")
+            Dim sVal As String = ""
+            EgtLuaGetGlobStringVar("CCD.NewMachineName", sVal)
+            OptionModule.m_CurrentMachine = sVal
+            EgtLuaResetGlobVar("CCD")
+            ' chiudo il programma e lo riavvio 
+            Map.refMainWindowVM.CloseApplication()
+            Process.Start(Application.ResourceAssembly.Location)
+         ' se altrimenti cambiata MTable
+         ElseIf m_OrigMTable <> OptionModule.m_SelectedMTable.Name Then
+            ' aggiorno il file Config.ini dell'EgtCAM5
+            EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
+            ' assegno variabili
+            EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
+            EgtLuaSetGlobStringVar("CCD.NewMTable", OptionModule.m_SelectedMTable.Name)
+            ' eseguo la funzione che esegue la scrittura delle variabili
+            EgtLuaCallFunction("CCD.ChangeConfigDirectory")
+            Dim sVal As String = ""
+            EgtLuaGetGlobStringVar("CCD.NewMachineName", sVal)
+            OptionModule.m_CurrentMachine = sVal
+            EgtLuaResetGlobVar("CCD")
+         End If
       End If
 
    End Sub

Order/OrderVM.vb

@@ -66,10 +66,18 @@ Public Class OrderVM
       End Get
    End Property
 
+   Private Function VerifyNotIsNothing() As Boolean
+      If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) OrElse
+         IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly) OrElse
+         Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then
+         Return False
+      End If
+      Return True
+   End Function
+
    Public Property Customer As String
       Get
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
-            Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then Return Nothing
+         If Not VerifyNotIsNothing() Then Return Nothing
          Return Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0).Door.Customer
       End Get
       Set(value As String)
@@ -83,8 +91,7 @@ Public Class OrderVM
 
    Public Property Elevation As String
       Get
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
-            Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then Return Nothing
+         If Not VerifyNotIsNothing() Then Return Nothing
          Return Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0).Door.Elevation
       End Get
       Set(value As String)
@@ -98,8 +105,7 @@ Public Class OrderVM
 
    Public Property Project As String
       Get
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
-            Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then Return Nothing
+         If Not VerifyNotIsNothing() Then Return Nothing
          Return Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0).Door.Project
       End Get
       Set(value As String)
@@ -113,8 +119,7 @@ Public Class OrderVM
 
    Public Property PO As String
       Get
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
-            Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then Return Nothing
+         If Not VerifyNotIsNothing() Then Return Nothing
          Return Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0).Door.PO
       End Get
       Set(value As String)
@@ -128,8 +133,7 @@ Public Class OrderVM
 
    Public Property Line As String
       Get
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) AndAlso
-            Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor.Count > 0 Then Return Nothing
+         If Not VerifyNotIsNothing() Then Return Nothing
          Return Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor(0).Door.Line
       End Get
       Set(value As String)

ProjectManager/ProjectManagerV.xaml

@@ -1,42 +1,43 @@
 <UserControl x:Class="ProjectManagerV"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:DOORCreator="clr-namespace:EgtDOORCreator"          >
 
     <StackPanel Orientation="Horizontal" IsEnabled="{Binding EnableProjectManager}" Height="32">
 
-      <!--Barra superiore dei comandi-->
-      <Button Command="{Binding NewCommand}" ToolTip="{Binding NewToolTip}" Focusable="False"
+        <!--Barra superiore dei comandi-->
+        <Button Command="{Binding NewCommand}" ToolTip="{Binding NewToolTip}" Focusable="False"
               IsEnabled="{Binding EnableModifyDDF}">
             <Image Source="{Binding NewProjectImg}" Stretch="Uniform"/>
-      </Button>
-      <!--Visibility="{Binding VisibilityDeleteDDF}"-->
+        </Button>
+        <!--Visibility="{Binding VisibilityDeleteDDF}"-->
         <Button Command="{Binding DeleteCommand}" ToolTip="{Binding DeleteToolTip}" Focusable="False"
                 IsEnabled="{Binding EnableModifyDDF}">
             <Image Source="{Binding DeleteProjectImg}" Stretch="Uniform"/>
-      </Button>
-      <Button Command="{Binding OpenCommand}" ToolTip="{Binding OpenToolTip}"
+        </Button>
+        <Button Command="{Binding OpenCommand}" ToolTip="{Binding OpenToolTip}"
               Focusable="False"
               ContextMenuService.Placement="Bottom"
               Tag="{Binding}">
-         <Button.ContextMenu>
-            <ContextMenu ItemsSource="{Binding MruFileNames}">
-               <ContextMenu.Resources>
-                  <Style TargetType="{x:Type MenuItem}">
-                     <Setter Property="Command"
+            <Button.ContextMenu>
+                <ContextMenu ItemsSource="{Binding MruFileNames}">
+                    <ContextMenu.Resources>
+                        <Style TargetType="{x:Type MenuItem}">
+                            <Setter Property="Command"
                           Value="{Binding PlacementTarget.Tag.OpenMruFileCommand,
                                           RelativeSource={RelativeSource Mode=FindAncestor,
                                                                          AncestorType=ContextMenu}}"/>
-                     <Setter Property="CommandParameter" Value="{Binding}" />
-                  </Style>
-               </ContextMenu.Resources>
-            </ContextMenu>
-         </Button.ContextMenu>
-         <Image Source="/Resources/TopCommandBar/Open.png" Stretch="Uniform"/>
-      </Button>
-      <Button Command="{Binding ReloadCommand}" ToolTip="{Binding ReloadToolTip}" Focusable="False"
+                            <Setter Property="CommandParameter" Value="{Binding}" />
+                        </Style>
+                    </ContextMenu.Resources>
+                </ContextMenu>
+            </Button.ContextMenu>
+            <Image Source="/Resources/TopCommandBar/Open.png" Stretch="Uniform"/>
+        </Button>
+        <Button Command="{Binding ReloadCommand}" ToolTip="{Binding ReloadToolTip}" Focusable="False"
               IsEnabled="{Binding EnableModifyDDF}">
-         <Image Source="/Resources/Refresh/RefreshDir.png" Stretch="Uniform"/>
-      </Button>
+            <Image Source="/Resources/Refresh/RefreshDir.png" Stretch="Uniform"/>
+        </Button>
         <Button Command="{Binding SaveCommand}" ToolTip="{Binding SaveToolTip}" Focusable="False"
                 IsEnabled="{Binding EnableModifyDDF}">
             <Image Source="/Resources/TopCommandBar/Save.png" Stretch="Uniform"/>
@@ -44,74 +45,77 @@
         </Button>
         <Button Command="{Binding DuplicaCommand}" ToolTip="{Binding DuplicaToolTip}" Focusable="False"
                 IsEnabled="{Binding EnableModifyDDF}">
-         <ContentControl>
-            <Image Source="/Resources/TopCommandBar/SaveAs.png" Stretch="Uniform" />
-         </ContentControl>
-      </Button>
-      <Button Command="{Binding CreateTemplateCommand}" ToolTip="{Binding TemplateDoorToolTip}" Focusable="False"
+            <ContentControl>
+                <Image Source="/Resources/TopCommandBar/SaveAs.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <Button Command="{Binding CreateTemplateCommand}" ToolTip="{Binding TemplateDoorToolTip}" Focusable="False"
               Visibility="{Binding VisibilityTemplate}" IsEnabled="{Binding EnableModifyDDF}">
-         <ContentControl>
-            <Image Source="/Resources/TopCommandBar/SaveAsTemplate.png" Stretch="Uniform" />
-         </ContentControl>
-      </Button>
-      <Button Command="{Binding CopyCommand}" ToolTip="{Binding CopyToolTip}" Focusable="False"
+            <ContentControl>
+                <Image Source="/Resources/TopCommandBar/SaveAsTemplate.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <Button Command="{Binding CopyCommand}" ToolTip="{Binding CopyToolTip}" Focusable="False"
               IsEnabled="{Binding EnableModifyDDF}">
-         <ContentControl>
-            <Image Source="/Resources/TopCommandBar/Export.png" Stretch="Uniform" />
-         </ContentControl>
-      </Button>
-      <Button Command="{Binding OpenCamCommand}" ToolTip="{Binding OpenCamToolTip}" Focusable="False"
+            <ContentControl>
+                <Image Source="/Resources/TopCommandBar/Export.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <Button Command="{Binding OpenCamCommand}" ToolTip="{Binding OpenCamToolTip}" Focusable="False"
               Visibility="{Binding VisibilityEgtCAM}" IsEnabled="{Binding EnableModifyDDF}">
-          <ContentControl>
+            <ContentControl>
                 <Image Source="/Resources/EgtCAM5.png" Stretch="Uniform" />
-          </ContentControl>
-      </Button>
+            </ContentControl>
+        </Button>
         <Button Command="{Binding PrintCommand}" ToolTip="{Binding PrintToolTip}" Focusable="False">
-         <ContentControl>
-            <Image Source="/Resources/InstrumentPanel/Print.png" Stretch="Uniform" />
-         </ContentControl>
-      </Button>
-      <!--<Button Command="{Binding RefreshDirCommand}" ToolTip="{Binding RefreshDirToolTip}" Focusable="False">
+            <ContentControl>
+                <Image Source="/Resources/InstrumentPanel/Print.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <!--<Button Command="{Binding RefreshDirCommand}" ToolTip="{Binding RefreshDirToolTip}" Focusable="False">
          <Image Source="/Resources/Refresh/RefreshDir.png" Stretch="Uniform"/>
       </Button>-->
-      <!--Hardware-->
-      <!--<Button Command="{Binding HardwareCommand}" ToolTip="{Binding HardwareToolTip}" Focusable="False"
+        <!--Hardware-->
+        <!--<Button Command="{Binding HardwareCommand}" ToolTip="{Binding HardwareToolTip}" Focusable="False"
               Visibility="{Binding DisableHM}">
          <ContentControl>
             <Image Source="/Resources/InstrumentPanel/Hardware.png" Stretch="Uniform" />
          </ContentControl>
       </Button>-->
-      <Button Command="{Binding CreateAssemblyCommand}" ToolTip="{Binding CreateAssemblyToolTip}" Focusable="False"
+        <Button Command="{Binding CreateAssemblyCommand}" ToolTip="{Binding CreateAssemblyToolTip}" Focusable="False"
               Visibility="{Binding VisibilityCreateAssembly}" IsEnabled="{Binding EnableModifyDDF}">
-          <ContentControl>
-              <Image Source="/Resources/TopCommandBar/Create Assembly.png" Stretch="Uniform" />
-          </ContentControl>
-      </Button>
-      <Button Command="{Binding OptionsCommand}" ToolTip="{Binding OptionsToolTip}" Focusable="False"
+            <ContentControl>
+                <Image Source="/Resources/TopCommandBar/Create Assembly.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <Button Command="{Binding OptionsCommand}" ToolTip="{Binding OptionsToolTip}" Focusable="False"
               Width="{Binding RelativeSource={RelativeSource Self}, Path=ActualHeight}" IsEnabled="{Binding EnableModifyDDF}">
-         <Image Source="/Resources/TopCommandBar/Options.png" Height="22" />
-      </Button>
-      <Button Command="{Binding SendFeedbackCommand}" ToolTip="{Binding SendFeedbackToolTip}" Focusable="False" 
+            <Image Source="/Resources/TopCommandBar/Options.png" Height="22" />
+        </Button>
+
+        <DOORCreator:SpecialPanelV DataContext="{StaticResource SpecialPanelVM}"/>
+
+        <Button Command="{Binding SendFeedbackCommand}" ToolTip="{Binding SendFeedbackToolTip}" Focusable="False" 
               IsEnabled="{Binding EnableModifyDDF}">
-         <Image Source="/Resources/TopCommandBar/Send.png" Height="22" Margin="3,0,3,0" />
-      </Button>
-      <Button Command="{Binding GuideCommand}" ToolTip="{Binding GuideToolTip}" Focusable="False">
-          <ContentControl>
-              <Image Source="/Resources/TopCommandBar/Help.png" Stretch="Uniform" />
-          </ContentControl>
-      </Button>
-      <!--Door-->
-      <RadioButton Style="{StaticResource ModeButton}" Visibility="{Binding DisableHM}"
+            <Image Source="/Resources/TopCommandBar/Send.png" Height="22" Margin="3,0,3,0" />
+        </Button>
+        <Button Command="{Binding GuideCommand}" ToolTip="{Binding GuideToolTip}" Focusable="False">
+            <ContentControl>
+                <Image Source="/Resources/TopCommandBar/Help.png" Stretch="Uniform" />
+            </ContentControl>
+        </Button>
+        <!--Door-->
+        <RadioButton Style="{StaticResource ModeButton}" Visibility="{Binding DisableHM}"
                    ToolTip="{Binding DoorToolTip}" 
                    IsChecked="{Binding DoorIsChecked}"
                    Content="{Binding DoorToolTip}"
                    IsEnabled="{Binding EnableModifyDDF}">
-      </RadioButton>
-      <!--Hardware-->
-      <RadioButton Style="{StaticResource ModeButton}" Visibility="{Binding DisableHM}" 
+        </RadioButton>
+        <!--Hardware-->
+        <RadioButton Style="{StaticResource ModeButton}" Visibility="{Binding DisableHM}" 
                    Command="{Binding HardwareCommand}" ToolTip="{Binding HardwareToolTip}"              
                    Content="{Binding HardwareToolTip}"
                    IsEnabled="{Binding EnableModifyDDF}">
-      </RadioButton>
-   </StackPanel>
+        </RadioButton>
+    </StackPanel>
 </UserControl>

ProjectManager/ProjectManagerVM.vb

@@ -6,7 +6,7 @@ Imports System.ComponentModel
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
-Imports Ionic.zip
+Imports Ionic.Zip
 
 Public Class ProjectManagerVM
    Implements INotifyPropertyChanged
@@ -67,11 +67,11 @@ Public Class ProjectManagerVM
 
    Public ReadOnly Property VisibilityEgtCAM As Visibility
       Get
-         If String.IsNullOrEmpty(IniFile.m_sEgtCameEXEPath) Then
+         If String.IsNullOrEmpty(IniFile.m_sEgtCam5EXEPath) Then
             Return Visibility.Collapsed
-         ElseIf Not File.Exists(IniFile.m_sEgtCameEXEPath) Then
+         ElseIf Not File.Exists(IniFile.m_sEgtCam5EXEPath) Then
             Return Visibility.Collapsed
-         ElseIf File.Exists(IniFile.m_sEgtCameEXEPath) Then
+         ElseIf File.Exists(IniFile.m_sEgtCam5EXEPath) Then
             Return Visibility.Visible
          Else
             Return Visibility.Collapsed
@@ -411,10 +411,10 @@ Public Class ProjectManagerVM
          Map.refAssemblyManagerVM.VisibilityDoorList = Visibility.Visible
          Return
       End If
-         '-------------------------------------------------------------------------------------------------------------------------
+      '-------------------------------------------------------------------------------------------------------------------------
 
-         'Prima di tutto chiedo se vuole aprire un template
-         Dim sImportTemplate As String = Map.refAssemblyManagerVM.ShowDialogImportTemplate
+      'Prima di tutto chiedo se vuole aprire un template
+      Dim sImportTemplate As String = Map.refAssemblyManagerVM.ShowDialogImportTemplate
 
       ' dichiaro la finestra di dialogo
       Dim saveFileDialog1 As New System.Windows.Forms.SaveFileDialog()
@@ -476,6 +476,7 @@ Public Class ProjectManagerVM
          ' creo un nuovo assemblato
          Dim Local_AssemblyName As New AssemblyName
          Local_AssemblyName.Name = FilePathComplete
+         Local_AssemblyName.OrigTemplate = sImportTemplate
          Local_AssemblyName.GraphicName = Path.GetFileNameWithoutExtension(FilePathComplete)
          m_CurrProject.AssemblyList.Add(Local_AssemblyName)
          ' Seleziono AssembyName creato
@@ -487,13 +488,17 @@ Public Class ProjectManagerVM
          End If
          ' tolgo la visualizzazione della lista dei nomi
          Map.refAssemblyManagerVM.CurrProject = CurrProject
-         Map.refAssemblyManagerVM.ImportTemplate(sImportTemplate)
+         Dim bImportedTemplate As Boolean = Map.refAssemblyManagerVM.ImportTemplate(sImportTemplate)
          ' Creo nuovo assembly
          Map.refAssemblyManagerVM.NewCmd(Local_AssemblyName)
          Utility.OutLog("Creazione nuovo progetto : " & saveFileDialog1.FileName)
          Utility.LockDir(Path.GetDirectoryName(saveFileDialog1.FileName), Path.GetFileNameWithoutExtension(saveFileDialog1.FileName))
          Map.refAssemblyManagerVM.VisibilityDoorList = Visibility.Collapsed
          CurrProject.NotifyPropertyChanged("Name")
+         ' Se l'importazione del template è andata a buon fine allora salvo
+         If bImportedTemplate Then
+            Save()
+         End If
       End If
 
    End Sub
@@ -682,8 +687,8 @@ Public Class ProjectManagerVM
                fd.InitialDirectory = IniFile.m_MyProjectDir
             End If
             ' seleziono il filtro di apertura
-            fd.Filter = "(*.ddt) |*.ddt|(*.ddf) |*.ddf"
-            fd.FilterIndex = 2
+            fd.Filter = "(*.ddf) |*.ddf|(*.ddt) |*.ddt"
+            fd.FilterIndex = GetCurrentFilter()
             fd.RestoreDirectory = True
             ' apro la finestra di dialogo
             If fd.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then
@@ -698,6 +703,8 @@ Public Class ProjectManagerVM
             sFilePath = Path.GetDirectoryName(fd.FileName)
             ' salvo il nome completo del file
             sFilePathComplete = fd.FileName
+            ' salvo l'estensione dell'ultimo progetto aperto
+            WriteMainPrivateProfileString("General", "LastExtensionOpened", Path.GetExtension(fd.FileName))
             ' se esiste un file in lettura con questo nome allora blocco tutto
             If Utility.IsFileLocked(sFilePath, Path.GetFileNameWithoutExtension(sFilePathComplete)) Then
                If Not IsNothing(Map.refAssemblyManagerVM.CurrProject) AndAlso Not IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
@@ -841,6 +848,21 @@ Public Class ProjectManagerVM
       End If
    End Sub
 
+   Private Function GetCurrentFilter() As Integer
+      Dim nFilter As Integer = 1
+      Dim sExt As String = String.Empty
+      GetMainPrivateProfileString("General", "LastExtensionOpened", "ddf", sExt)
+      sExt = sExt.Replace("."c, "")
+      sExt = sExt.Trim
+      Select Case sExt
+         Case = "ddf"
+            nFilter = 1
+         Case = "ddt"
+            nFilter = 2
+      End Select
+      Return nFilter
+   End Function
+
 #End Region ' OpenCommand
 
 #Region "OpenMruFileCommand"
@@ -982,7 +1004,12 @@ Public Class ProjectManagerVM
                Local_Assembly.IsModified = False
                CurrProject.AssemblyList.Add(Local_Assembly)
             Else
+               EgtOutLog("LastProject '" & OptionModule.m_sLastProject & "' is not a file or does not exist!")
                Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nNothingSelected
+               If OptionModule.AdjustDDT Then
+                  EgtExit()
+                  Application.Current.Shutdown(3)
+               End If
                Return
             End If
          Else
@@ -1188,17 +1215,48 @@ Public Class ProjectManagerVM
       End If
       ' se esite una porta, allora rendo possibile la  creazione di un template della porta corrente
       If Not IsNothing(Map.refPartPageVM.CurrPart) Then
-         ' Stampo il file correte nella cartella Template
-         Dim SaveFileDialog As New MySaveFileDialogVM
-         Dim SaveFileDialogWnd As New EgtWPFLib5.SaveFileDialogV(Application.Current.MainWindow, SaveFileDialog)
-         SaveFileDialog.Title = EgtMsg(50417)
-         SaveFileDialog.Directory = IniFile.m_TemplateDir
-         SaveFileDialog.Extension = DDT_EXTENSION
-         'SaveFileDialog.FileName = m_CurrProject.Name & "\"
-         ' se decido di chiuedere la finestra
-         If Not SaveFileDialogWnd.ShowDialog Then
+
+         ' ' Stampo il file correte nella cartella Template
+         ' Dim SaveFileDialog As New MySaveFileDialogVM
+         ' Dim SaveFileDialogWnd As New EgtWPFLib5.SaveFileDialogV(Application.Current.MainWindow, SaveFileDialog)
+         ' SaveFileDialog.Title = EgtMsg(50417)
+         ' SaveFileDialog.Directory = IniFile.m_TemplateDir
+         ' SaveFileDialog.Extension = DDT_EXTENSION
+         ' 'SaveFileDialog.FileName = m_CurrProject.Name & "\"
+         ' ' se decido di chiuedere la finestra
+         ' If Not SaveFileDialogWnd.ShowDialog Then
+         '    Return
+         ' End If
+
+         ' Apro la finestra di salvataggio generica
+         Dim SaveFileDialog As New System.Windows.Forms.SaveFileDialog()
+         ' controllo se esiste il file DDF
+         Dim sFilePath As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
+         If File.Exists(sFilePath) Then
+            ' recupero il nome del template che ha generato il DDF corrente
+            Dim DDTOrig As String = String.Empty
+            Dim fStream As String() = File.ReadAllLines(sFilePath)
+            DDTOrig = ReadOrigTemplate(fStream)
+            SaveFileDialog.Filter = "(*.ddt) |*.ddt"
+            SaveFileDialog.FilterIndex = 2
+            If String.IsNullOrEmpty(DDTOrig) Then
+               If OptionModule.m_SingleDoor Then
+                  SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name)
+               Else
+                  SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(Map.refAssemblyManagerVM.CurrProject.Name)
+               End If
+            Else
+               SaveFileDialog.FileName = Path.GetFileNameWithoutExtension(DDTOrig)
+            End If
+         End If
+
+         ' avvio la ricerca nell'ultimo direttorio aperto
+         SaveFileDialog.InitialDirectory = IniFile.m_TemplateDir
+         If SaveFileDialog.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then
+            ' Interrompo la creazione del template
             Return
          End If
+
          ' Controllo se ha estensione il nome della porta
          If Path.HasExtension(SaveFileDialog.FileName) Then
             Dim sExtension As String = Path.GetExtension(SaveFileDialog.FileName)
@@ -1316,15 +1374,13 @@ Public Class ProjectManagerVM
 
    Public Sub OpenCam()
       If IsNothing(Map.refAssemblyManagerVM.CurrProject) OrElse
-       IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
+         IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
          ' 50192 = Impossible to export to machine a door if there is not a door!
          MessageBox.Show(EgtMsg(50192), EgtMsg(50144), MessageBoxButton.OK, MessageBoxImage.Warning)
          Return
       End If
       'Verifico che tutto sia salvato, altrimenti esco con messaggio
       If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified Then
-         '' Project must be saved before copying
-         'MessageBox.Show(EgtMsg(50186), EgtMsg(50144), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' 50177=Do you want to save the current changes?
          Dim ResultMsg As MessageBoxResult = MessageBox.Show(EgtMsg(50177), EgtMsg(50144), MessageBoxButton.OKCancel, MessageBoxImage.Warning)
          If ResultMsg = MessageBoxResult.OK Then
@@ -1335,22 +1391,14 @@ Public Class ProjectManagerVM
             Return
          End If
       End If
-      '' elimino eventuali file .txt associati a ddf corrente (per lettura dei messaggi di errore stampati nel dal log del CAM5)
-      'Dim FileLog As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
-      'FileLog = FileLog.Replace(DDF_EXTENSION, ".txt")
-      'Try
-      '   File.Delete(FileLog)
-      'Catch
-      'End Try
+      ' Lancio esecuzione CAM5
       Dim Proc As New Process
-      ' Dim CurrFile As String = IniFile.m_sTempDir & "\CurrPart" & DDF_EXTENSION
-      Dim CurrFile As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
+      Dim sCurrFile As String = Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.Name
+      ' Flag : 0 = solo disegno, 1 = anche calcolo lavorazioni
+      Dim nFlag As Integer = If((Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift, 1, 0)
       Try
-         Proc.StartInfo.FileName = IniFile.m_sEgtCameEXEPath
-         ' 0:  creata una porta come descritta nel file riferito
-         ' 1 viene creata la porta e il suo programma di lavorazione sul centro di lavoro preconfigurato
-         ' Proc.StartInfo.Arguments = """" & CurrFile & """ " & If((Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift, """1""", """0""")
-         Proc.StartInfo.Arguments = """" & CurrFile & """ " & """0"""
+         Proc.StartInfo.FileName = IniFile.m_sEgtCam5EXEPath
+         Proc.StartInfo.Arguments = """" & sCurrFile & """  """ & nFlag & """"
          If Not Proc.Start() Then
             ' Error in starting EgtCam5.exe
             MessageBox.Show(EgtMsg(50567), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
@@ -1359,22 +1407,6 @@ Public Class ProjectManagerVM
          ' Error in starting EgtCam5.exe
          MessageBox.Show(EgtMsg(50567), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
       End Try
-      'Dim sError As String = String.Empty
-      'Dim nType As Integer = 0
-      'Dim nCountCycle As Integer = 0
-      '' al massimo attendo 5 secondi
-      'While Not (Proc.HasExited Or File.Exists(FileLog)) And nCountCycle < 50
-      '   Threading.Thread.Sleep(100)
-      '   nCountCycle += 1
-      'End While
-      'ShowGraphicError(sError, nType)
-      'If Not String.IsNullOrEmpty(sError) And nType > 0 Then
-      '   'Proc.Kill()
-      '   MessageBox.Show(sError, EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
-      'ElseIf Not String.IsNullOrEmpty(sError) And nType < 0 Then
-      '   'Proc.Kill()
-      '   MessageBox.Show(sError, EgtMsg(50144), MessageBoxButton.OK, MessageBoxImage.Warning)
-      'End If
    End Sub
 
 #End Region    ' Copy

ProjectManager/SelectPartV.xaml

@@ -0,0 +1,38 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="SelectPartV"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   Title="{Binding Title}"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+   IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
+   Height="110" Width="300" Topmost="True"
+   DataContext="{Binding RelativeSource={RelativeSource Self}}">
+
+    <!--<EgtWPFLib5:EgtCustomWindow.Resources>
+      <EgtWPFLib5:FileNameConverter x:Key="FileNameConverter"/>
+   </EgtWPFLib5:EgtCustomWindow.Resources>-->
+
+    <Grid>
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
+
+        <UniformGrid Columns="2" Grid.Row="0" Grid.ColumnSpan="2">
+            <TextBlock Margin="5" Height="24" Text="{Binding PartDoorMsg}" VerticalAlignment="Center"/>
+            <ComboBox Margin="5,0,5,0" Height="24" VerticalAlignment="Center"
+                      ItemsSource="{Binding PartDoorList}" SelectedItem="{Binding Selection}"/>
+        </UniformGrid>
+        
+
+        <Button IsDefault="True" Name="OkBtn" Grid.Row="2" Grid.ColumnSpan="2" HorizontalAlignment="Right"
+                Margin="0,0,5,0"
+               Content="{Binding SaveMsg}" Style="{DynamicResource EgtWPFLib5_InputButton}"/>
+    </Grid>
+
+    </EgtWPFLib5:EgtCustomWindow>

ProjectManager/SelectPartV.xaml.vb

@@ -0,0 +1,15 @@
+Public Class SelectPartV
+
+   Sub New()
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      Me.Close()
+   End Sub
+End Class

ProjectManager/SelectPartVM.vb

@@ -0,0 +1,68 @@
+Public Class SelectPartVM
+
+   Private m_Title As String = "Selection of door"
+   Public ReadOnly Property Title As String
+      Get
+         Return m_Title
+      End Get
+   End Property
+
+   Private m_SaveMsg As String = "Ok"
+   Public ReadOnly Property SaveMsg As String
+      Get
+         Return m_SaveMsg
+      End Get
+   End Property
+
+   Private m_PartDoorMsg As String = "Select part"
+   Public ReadOnly Property PartDoorMsg As String
+      Get
+         Return m_PartDoorMsg
+      End Get
+   End Property
+
+   Private m_PartDoorList As New List(Of String)
+   Public Property PartDoorList As List(Of String)
+      Get
+         Return m_PartDoorList
+      End Get
+      Set(value As List(Of String))
+         m_ListPartDoor = value
+      End Set
+   End Property
+
+   Private m_Selection As String = ""
+   Public Property Selection As String
+      Get
+         Return m_Selection
+      End Get
+      Set(value As String)
+         m_Selection = value
+         m_nSelectedIndex = m_PartDoorList.IndexOf(m_Selection)
+      End Set
+   End Property
+
+   Private m_nSelectedIndex As Integer = 0
+   Public ReadOnly Property nSelectedIndex As Integer
+      Get
+         Return m_nSelectedIndex
+      End Get
+   End Property
+
+
+   Sub New(TitleWd As String, MsgWd As String, nParts As Integer, nIndex As Integer)
+      m_Title = TitleWd
+      m_PartDoorMsg = MsgWd
+      For Each ItemDoor As PartDoor In Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.SelAssembly.ListPartDoor
+         m_PartDoorList.Add(ItemDoor.Type)
+      Next
+      If Not IsNothing(Map.refPartPageVM) AndAlso Not IsNothing(Map.refPartPageVM.CurrPart) AndAlso
+      Not IsNothing(Map.refPartPageVM.CurrPart.TypePart) Then
+         m_nSelectedIndex = m_PartDoorList.IndexOf(Map.refPartPageVM.CurrPart.TypePart)
+      Else
+         m_nSelectedIndex = 0
+      End If
+      m_Selection = m_PartDoorList(m_nSelectedIndex)
+   End Sub
+
+End Class

ProjectManager/SpecialPanelV.xaml

@@ -0,0 +1,26 @@
+<UserControl x:Class="SpecialPanelV"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:local="clr-namespace:EgtDOORCreator"
+             mc:Ignorable="d" 
+             d:DesignHeight="450" d:DesignWidth="800"
+             Visibility="{Binding SpecialPanelVisibility}">
+    <StackPanel Orientation="Horizontal" Height="32">
+        <ItemsControl ItemsSource="{Binding ButtonList}">
+            <ItemsControl.ItemsPanel>
+                <ItemsPanelTemplate>
+                    <StackPanel Orientation="Horizontal"/>
+                </ItemsPanelTemplate>
+            </ItemsControl.ItemsPanel>
+            <ItemsControl.ItemTemplate>
+                <DataTemplate>
+                    <Button ToolTip="{Binding ToolTip}" Command="{Binding LuaExecCommand}">
+                        <Image Source="{Binding ImagePath}"/>
+                    </Button>
+                </DataTemplate>
+            </ItemsControl.ItemTemplate>
+        </ItemsControl>
+    </StackPanel>
+</UserControl>

ProjectManager/SpecialPanelV.xaml.vb

@@ -0,0 +1,3 @@
+Public Class SpecialPanelV
+
+End Class

ProjectManager/SpecialPanelVM.vb

@@ -0,0 +1,121 @@
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class SpecialPanelVM
+   Inherits VMBase
+
+   Private m_ButtonList As New List(Of ButtonItem)
+   Public ReadOnly Property ButtonList As List(Of ButtonItem)
+      Get
+         Return m_ButtonList
+      End Get
+   End Property
+
+   Private m_SpecialPanelVisibility As Visibility
+   Public ReadOnly Property SpecialPanelVisibility As Visibility
+      Get
+         Return m_SpecialPanelVisibility
+      End Get
+   End Property
+   Friend Sub SetSpecialPanelVisibility(bValue As Boolean)
+      m_SpecialPanelVisibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(SpecialPanelVisibility))
+   End Sub
+
+   Sub New()
+      ' Creo riferimento a questa classe in Map
+      Map.SetRefSpecialPanelVM(Me)
+      ' se attivo, inizializzo i bottoni leggendoli da file ini
+      If OptionModule.IsActiveSpecialPanel Then
+         Dim BtnIndex As Integer = 1
+         Dim CurrBtn As ButtonItem = Nothing
+         While GetPrivateProfileButton(S_SPECIAL, K_BUTTON & BtnIndex, "", CurrBtn)
+            m_ButtonList.Add(CurrBtn)
+            BtnIndex += 1
+         End While
+      End If
+   End Sub
+
+End Class
+
+Public Class ButtonItem
+   Inherits VMBase
+
+   Private m_sImagePath As String
+   Public ReadOnly Property ImagePath As String
+      Get
+         Return m_sImagePath
+      End Get
+   End Property
+
+   Private m_sLuaCmdPath As String
+
+   Private m_sToolTip As String
+   Public ReadOnly Property ToolTip As String
+      Get
+         Return m_sToolTip
+      End Get
+   End Property
+
+   Friend m_Btn_Visibility As Visibility
+   Public ReadOnly Property Btn_Visibility As Visibility
+      Get
+         Return m_Btn_Visibility
+      End Get
+   End Property
+
+   Friend m_Btn_IsEnabled As Boolean = True
+   Public ReadOnly Property Btn_IsEnabled As Boolean
+      Get
+         Return m_Btn_IsEnabled
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdLuaExec As ICommand
+
+   Sub New(sLuaCmdPath As String, sImagePath As String, sToolTip As String)
+      ' creo il percorso del file
+      m_sImagePath = IniFile.m_sResourcesRoot & "\" & sImagePath
+      If Not File.Exists(m_sImagePath) Then
+         EgtOutLog("File '" & m_sImagePath & "' does not exist.")
+      End If
+      m_sLuaCmdPath = IniFile.m_sScriptsRoot & "\" & sLuaCmdPath
+      m_sToolTip = sToolTip
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "LuaExecCommand"
+
+   Public ReadOnly Property LuaExecCommand As ICommand
+      Get
+         If m_cmdLuaExec Is Nothing Then
+            m_cmdLuaExec = New Command(AddressOf LuaExec)
+         End If
+         Return m_cmdLuaExec
+      End Get
+   End Property
+
+   Public Sub LuaExec(ByVal param As Object)
+      If Not File.Exists(m_sLuaCmdPath) Then
+         EgtOutLog("File '" & m_sLuaCmdPath & "' does not exists.")
+         Return
+      End If
+      If Not Path.GetExtension(m_sLuaCmdPath).ToLower = ".lua" Then
+         EgtOutLog("File '" & m_sLuaCmdPath & "' has not '.lua' extension.")
+         Return
+      End If
+      Dim bOk As Boolean = EgtLuaExecFile(m_sLuaCmdPath)
+      If Not bOk Then
+         EgtOutLog("File '" & m_sLuaCmdPath & "' has not been excute.")
+      End If
+
+   End Sub
+
+#End Region ' LuaExecCommand
+
+#End Region    ' Commands
+
+End Class

RegexFunction.vb

@@ -121,6 +121,20 @@ Module RegexFunction
       Return True
    End Function
 
+   ' leggo dal vettore per cercare la stringa OrigTemplate
+   Friend Function ReadOrigTemplate(fStream As String()) As String
+      Dim sOrigTemplate As String = String.Empty
+      For Each Line As String In fStream
+         If Line.Contains("#OrigTemplate") Then
+            sOrigTemplate = Regex.Match(Line, "\s*:\s*(.*?)\s*$").Groups(1).Value
+            Return sOrigTemplate
+            Exit For
+         End If
+      Next
+      ' Processo il tipo di configurazione
+      Return sOrigTemplate
+   End Function
+
    ' restituisce quello che segue l'uguale assegnata la parola chiave Err
    Friend Function ErrDraw(sLine As String) As Integer
       Dim sErrMsg As String = Regex.Match(sLine, "\s*(Err)\s*=\s*(.*?\b)\s*$").Groups(2).Value

SceneManager/InstrumentPanel/InstrumentPanelV.xaml

@@ -1,35 +1,35 @@
 <UserControl x:Class="InstrumentPanelV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtDOORCreator="clr-namespace:EgtDOORCreator">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtDOORCreator="clr-namespace:EgtDOORCreator">
 
-    <StackPanel Background="Transparent" Orientation="Horizontal" >
-        <ToggleButton ToolTip="{Binding GetDistToolTip}" IsEnabled ="{Binding EnableCmdDist}"
+   <StackPanel Background="Transparent" Orientation="Horizontal" >
+      <ToggleButton ToolTip="{Binding GetDistToolTip}" IsEnabled ="{Binding EnableCmdDist}"
                     Style="{StaticResource GridViewPanelToggleButton}" IsChecked="{Binding GetDistIsChecked}">
          <Image Source="/Resources/InstrumentPanel/GetDist.png" Stretch="Uniform"  Width="25" />
       </ToggleButton>
       <Button ToolTip="{Binding LinearDimensionToolTip}"
-             ToolTipService.ShowOnDisabled="True"
-             Command="{Binding LinearDimensionCommand}" IsEnabled="{Binding EnableCmdDimension}"
-             Visibility="{Binding DimensionVisibility}">
-            <Image Source="/Resources/InstrumentPanel/LinearDimension.png" Stretch="Uniform"  Width="25"/>
+              ToolTipService.ShowOnDisabled="True"
+              Command="{Binding LinearDimensionCommand}" IsEnabled="{Binding EnableCmdDimension}"
+              Visibility="{Binding DimensionVisibility}">
+         <Image Source="/Resources/InstrumentPanel/LinearDimension.png" Stretch="Uniform"  Width="25"/>
       </Button>
-        <TextBox Style="{StaticResource DimensioParameter}"
-                 Name ="TextBox1"
-                 Visibility="{Binding TextDimensionVisibility}" Margin="5" 
-                 Width="100" Height="25" 
-                 Text="{Binding TextDimension, UpdateSourceTrigger=PropertyChanged}">
-            <TextBox.InputBindings>
-                <KeyBinding Key="Enter" Command="{Binding OkTextDimension}"/>
-            </TextBox.InputBindings>
-        </TextBox>
+      <TextBox Style="{StaticResource DimensioParameter}"
+               Name ="TextBox1"
+               Visibility="{Binding TextDimensionVisibility}" Margin="5" 
+               Width="100" Height="25" 
+               Text="{Binding TextDimension, UpdateSourceTrigger=PropertyChanged}">
+         <TextBox.InputBindings>
+            <KeyBinding Key="Enter" Command="{Binding OkTextDimension}"/>
+         </TextBox.InputBindings>
+      </TextBox>
 
-        <Button Command="{Binding PrintHardwareCommand}" ToolTip="{Binding PrintHardwareToolTip}" Focusable="False"
+      <Button Command="{Binding PrintHardwareCommand}" ToolTip="{Binding PrintHardwareToolTip}" Focusable="False"
               IsEnabled ="{Binding EnableCmdSaveImg}" Visibility="{Binding SaveImgHardware}">
          <ContentControl>
-               <Image Source="/Resources/TopCommandBar/SaveAs.png" Stretch="Uniform"  Width="25"/>
+            <Image Source="/Resources/TopCommandBar/SaveAs.png" Stretch="Uniform"  Width="25"/>
          </ContentControl>
       </Button>
-    </StackPanel>
+   </StackPanel>
 
 </UserControl>

SceneManager/InstrumentPanel/InstrumentPanelVM.vb

@@ -29,7 +29,7 @@ Public Class InstrumentPanelVM
 
 #Region "FIELDS & PROPERTIES"
 
-   Private m_GetDistIsChecked As Boolean = True
+   Private m_GetDistIsChecked As Boolean = False
    Public Property GetDistIsChecked As Boolean
       Get
          GetDistance(m_GetDistIsChecked)
@@ -44,6 +44,13 @@ Public Class InstrumentPanelVM
       End Set
    End Property
 
+   ' Restituisce l'ultimo stato del comando
+   Public ReadOnly Property ActualDistanceState As Boolean
+      Get
+         Return m_GetDistIsChecked
+      End Get
+   End Property
+
    ' se il bottone è selezionato (true) allora misura, altrimenti no (false)
    Public Sub GetDistance(bGetDistanceIsChecked As Boolean)
       If bGetDistanceIsChecked Then

SceneManager/SceneManagerVM.vb

@@ -121,12 +121,26 @@ Public Class SceneManagerVM
             m_ProjectSceneHost.Child = Nothing
             ' Se manca la chiave
             If IniFile.m_nKeyLevel = -1 Or IniFile.m_nKeyLevel = -2 Then
-               EgtOutLog("Missing Dongle")
-               ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
-               Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
-               Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+               If Not EgtGetNetHwKey() Then
+                  EgtOutLog("Missing Dongle")
+                  ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
+                  Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
+                  Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+                  MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
+               Else
+                  EgtOutLog("NetDongle is full")
+                  ' Box di avviso slot chiave di rete occupato : "Chiave di Rete completamente occupata. \n Uscire dal programma su un altro PC." "Errore"
+                  Dim sText As String = EgtMsg(10110) & vbCrLf & EgtMsg(10111)
+                  Dim sTitle As String = EgtMsg(10101)
+                  MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
+               End If
+            ElseIf IniFile.m_nKeyLevel = -9 Then
+               EgtOutLog("Missing Link with Net Dongle")
+               ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione." "Errore"
+               Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
+               Dim sTitle As String = EgtMsg(10101)
                MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
-            ' Altrimenti manca la licenza
+               ' Altrimenti manca la licenza
             Else
                EgtOutLog("Problems with Licence")
                ' Box di avviso licenza con problemi : "Programma senza licenza. \n Caricala e riavvia il programma."  "Errore"
@@ -158,7 +172,7 @@ Public Class SceneManagerVM
             ' Chiudo il programma
             End
          End If
-      Return m_ProjectSceneHost
+         Return m_ProjectSceneHost
       End Get
    End Property
 
@@ -332,7 +346,7 @@ Public Class SceneManagerVM
       ElseIf Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage Then
          If Not EnableRefresh Then Return
          ' Verifico esista elemento selezionato
-         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) orelse IsNothing(Map.refAssemblyPageVM.CurrAssembly) Then Return
+         If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) OrElse IsNothing(Map.refAssemblyPageVM.CurrAssembly) Then Return
          DdfFile.WriteDDFAssembly(Map.refAssemblyPageVM.CurrAssembly, sTempFile, True)
          ExecDoors(m_ProjectScene, sTempFile, False)
          ' mantengo i layer accesi
@@ -421,6 +435,111 @@ Public Class SceneManagerVM
 
 #End Region    ' Command
 
+#Region "EVENT Scene"
+
+   Private Sub MouseMoveOverScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_ProjectScene.OnMouseMoveScene
+      ' Se non abilitata l'evidenziazione dei compo allora esco
+      If GetMainPrivateProfileInt(S_GENERAL, "MarkCompo", 0) = 0 Then Return
+      ' Se misurazione attiva
+      If Map.refInstrumentPanelVM.ActualDistanceState Then Return
+      ' se non esiste una porta corrente allora esco
+      If IsNothing(Map.refPartPageVM) OrElse IsNothing(Map.refPartPageVM.CurrPart) Then
+         Return
+      End If
+      Dim LocalCompoList As ObservableCollection(Of Compo) = Map.refPartPageVM.CurrPart.CompoList
+      ' Ripulisco la scena da i Mark
+      Map.refPartPageVM.CurrPart.ResetAllMark()
+      ' Se la lista dei componenti è vuota allora esco
+      If Map.refPartPageVM.CurrPart.CompoList.Count < 1 Then
+         EgtDraw()
+         Return
+      End If
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+      'If Not Map.refInstrumentPanelVM.ActualDistanceState Then
+      ' Verifico se selezionato curva
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSel As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
+      Dim nId As Integer = EgtGetFirstObjInSelWin()
+      While nId <> GDB_ID.NULL
+         If EgtGetType(nId) = GDB_TY.CRV_COMPO Or EgtGetType(nId) = GDB_TY.CRV_ARC Or EgtGetType(nId) = GDB_TY.CRV_LINE Then
+            Dim nIdParent As Integer = EgtGetParent(nId)
+            Dim sNameLayer As String = String.Empty
+            EgtGetName(nIdParent, sNameLayer)
+            If Not sNameLayer.StartsWith("AUX") Or Not sNameLayer.StartsWith("SOLID") Or Not sNameLayer.StartsWith("DIM") Then
+               ' scorro l'elenco dei componenti fino a trovare un riscontro tra i nomi e i parametri
+               For Each ItemCompo As Compo In LocalCompoList
+                  If MatchCompoFromScena(nIdParent, ItemCompo, LocalCompoList) Then Exit While
+               Next
+            End If
+         End If
+         ' Passo al successivo
+         nId = EgtGetNextObjInSelWin()
+      End While
+      'End If
+      EgtDraw()
+   End Sub
+
+   Private Function MatchCompoFromScena(nIdLay As Integer, CurrCompo As Compo, CompoList As ObservableCollection(Of Compo)) As Boolean
+      If IsNothing(CurrCompo) Then Return True
+      ' recupero la lista dei compo dello stesso tipo
+      Dim TempList As ObservableCollection(Of Compo) = DdfFile.GetCurrentListSameCompoType(CompoList, CurrCompo.CompoType.DDFName)
+      ' recupero la lista dei compo con lo stesso nome
+      TempList = DdfFile.GetCurrentListSameCompoDDFName(TempList, CurrCompo.SelFile, CurrCompo.SelBrandPart)
+      ' riordino la lista appena trovata secondo le regole di stampa DDF
+      DdfFile.GetOrderedListSameCompo(TempList)
+      ' ottengo la posizione prevista nella grafica
+      Dim IndexInList As Integer = DdfFile.GetIndexInList(TempList, CurrCompo)
+      ' recupero la lista ordinata
+      Dim sCompoName As String = CurrCompo.TemplateSelItem
+      ' oridnamento del layer
+      Dim IndexLay As Integer = -1
+      ' recupero il nome della comaponente selezionata con MouseOver
+      Dim sInfoPath As String = String.Empty
+      If Not EgtGetInfo(nIdLay, "Path", sInfoPath) Then Return True
+      ' Dim sNamePath As String = Path.GetFileNameWithoutExtension(sInfoPath)
+      Dim sNamePath As String = sInfoPath
+      'If sNamePath = sCompoName Then
+      If sNamePath.Contains(sCompoName) Then
+         Dim nCurrLayId As Integer = nIdLay
+         Dim nCounter As Integer = 1
+         While nCurrLayId <> GDB_ID.NULL
+            nCurrLayId = EgtGetNext(nCurrLayId)
+            Dim LocalsPath As String = String.Empty
+            If EgtGetInfo(nCurrLayId, "Path", LocalsPath) Then
+               If sNamePath.Trim = LocalsPath.Trim Then
+                  nCounter += 1
+               End If
+            End If
+         End While
+         IndexLay = TempList.Count - nCounter
+      End If
+      ' la compo passata non ha lo stesso nome, quindi mi aspetto un'altra compo
+      If IndexLay = -1 Then Return False
+
+      While IndexInList < TempList.Count And nIdLay <> GDB_ID.NULL
+         ' recupero l'ordinamento del layer
+         If sNamePath.Contains(sCompoName) And IndexLay = IndexInList Then
+            EgtSetMark(nIdLay)
+            ' evidenzio la compo corrente
+            TempList(IndexInList).SetMark()
+            ' ricerca terminata correttamente
+            Return True
+            Exit While
+         ElseIf sNamePath.Contains(sCompoName) And IndexInList < IndexLay Then
+            IndexInList += 1
+         Else
+            Return False
+         End If
+      End While
+      ' prova con un'altra compo
+      Return False
+   End Function
+
+#End Region    ' Event scene
+
    Public Sub ComposeAssembly(nAssembl As Integer)
       If Not File.Exists(IniFile.m_sDoorsDirPath & "\" & "Main_Assemb.lua") Then
          EgtOutLog("SetUp error: SetUp configuration file (" & IniFile.m_sDoorsDirPath & "\" & "Main_Assemb.lua)" & " doesn't exist ")

Utility.vb

@@ -22,6 +22,10 @@ Public Module Utility
 
    ' CurrFile deve arrivare già senza estensione!
    Private Function GenerateLockFileName(ByVal CurrDirectory As String, Optional ByVal CurrFile As String = "") As String
+      ' Se in modalità Modifica file DDT allora non bloccare il file
+      If OptionModule.AdjustDDT Then
+         Return String.Empty
+      End If
       If OptionModule.ReadOnlyDDF Then
          Return String.Empty
       End If
@@ -40,6 +44,10 @@ Public Module Utility
    End Function
 
    Public Function IsFileLocked(ByVal CurrDirectory As String, Optional ByVal CurrFile As String = "", Optional ByVal bSendMsg As Boolean = True) As Boolean
+      If String.IsNullOrEmpty(CurrDirectory) Then
+         EgtOutLog("Impossible to find directory")
+         Return False
+      End If
       Dim sLockFile As String = GenerateLockFileName(CurrDirectory, CurrFile)
       Dim bIsLocked As Boolean = False
       Dim FileList As String() = Directory.GetFiles(CurrDirectory)
@@ -262,6 +270,18 @@ Public Module Utility
       Return Index
    End Function
 
+   ' Verifica se il file/path indicato è ddf (true)
+   Friend Function IsCurrentFileDDF(sFileName As String) As Boolean
+      Dim IsDDF As Boolean = True
+      If Not String.IsNullOrEmpty(sFileName) AndAlso Path.HasExtension(sFileName) Then
+         Dim sExtension As String = Path.GetExtension(sFileName)
+         If sExtension.ToLower = DDT_EXTENSION Then
+            IsDDF = False
+         End If
+      End If
+      Return IsDDF
+   End Function
+
 #Region "PARAM LUA"
 
    ' elimina i commenti nel file lua
@@ -304,7 +324,32 @@ Public Module Utility
                   Return "0.0000"
                End If
          End Select
-      ElseIf sValue.Contains("(") And sValue.Contains(")") And Not sValue.Contains("inch") Then
+      ElseIf sValue.Contains("(") And sValue.Contains(")") And sValue.Contains("mm") Then
+         sValue = Trim(sValue.Replace("mm", ""))
+         If sValue.StartsWith("(") And sValue.EndsWith(")") Then
+            Dim ArrayString() As Char = StringToChar(sValue)
+            ArrayString(0) = CChar("§")
+            ArrayString(ArrayString.Count - 1) = CChar("§")
+            sValue = CharToString(ArrayString, sValue)
+            sValue = Trim(sValue.Replace("§", ""))
+         End If
+         If String.IsNullOrEmpty(sValue) Then Return "0.0000"
+         ' ricevo un valore in inches 
+         Select Case OptionModule.m_SelectedMeasureUnit
+            Case ConstGen.MM    ' se la configurazione è inches non faccio conversioni
+               If StringToDouble(sValue, dVal) Then
+                  Return sValue
+               Else
+                  Return "0.0000"
+               End If
+            Case ConstGen.VAL_INCHES      ' se la configurazione è in mm faccio la conevrsione 
+               If MmToInches(sValue) Then
+                  Return sValue
+               Else
+                  Return "0.0000"
+               End If
+         End Select
+      ElseIf sValue.Contains("(") And sValue.Contains(")") And (Not sValue.Contains("inch") Or Not sValue.Contains("mm")) Then
          'sValue = Regex.Match(sValue, "\s*\((.*?)\s*\)\s*\.*").Groups(1).Value
          If String.IsNullOrEmpty(sValue) Then Return "0.0000"
          ' ricevo un valore in mm 
@@ -353,7 +398,7 @@ Public Module Utility
    Friend Function MmToInches(ByRef sMeasure As String) As Boolean
       Dim dVal As Double = 0.0
       If Not StringToDouble(sMeasure, dVal) Then Return False
-      dVal = dVal / ONEINCH
+      'dVal = dVal / ONEINCH
       sMeasure = LenToString(dVal, 4)
       Return True
    End Function
@@ -379,6 +424,10 @@ Public Module Utility
          ' non eseguo nessun tipo di conversione
          Return True
       Else
+         ' la configurazione è già in mm quindi non devo convertire
+         If OptionModule.m_IsMM Then
+            Return True
+         End If
          Return InchesToMm(sMeasure)
       End If
       Return False
@@ -417,7 +466,7 @@ Public Module Utility
          End If
       ElseIf OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES And OptionModule.m_IsMM Then
          ' Discordi
-         If StringToLen(sItems, dDefaultValue) AndAlso dDefaultValue < dControlValue Then
+         If StringToDouble(sItems, dDefaultValue) AndAlso dDefaultValue < dControlValue Then
             MmToInches(sItems)
             Return True
          End If
@@ -525,9 +574,9 @@ Public Module Utility
             sMyVal = sMyVal.Replace("H", "(DGD.dH/25.4)")
             sMyVal = sMyVal.Replace("T", "(DGD.dT/25.4)")
          Else
-            sMyVal = sMyVal.Replace("W", "DGD.dW")
-            sMyVal = sMyVal.Replace("H", "DGD.dH")
-            sMyVal = sMyVal.Replace("T", "DGD.dT")
+            sMyVal = sMyVal.Replace("W", "(DGD.dW)")
+            sMyVal = sMyVal.Replace("H", "(DGD.dH)")
+            sMyVal = sMyVal.Replace("T", "(DGD.dT)")
          End If
       End If
       Return sMyVal
@@ -536,16 +585,25 @@ Public Module Utility
    Friend Function ConvertToDGD(sTypeVar As String, sValue As String) As String
       Dim sMyVal As String = sValue
       ' se testo numerico, eseguo opportunbe conversioni per H,W e T
-      If sTypeVar = ConstGen.INCHES Or sTypeVar = ConstGen.MM Then
-         If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
-            sMyVal = sMyVal.Replace("(DGD.dW/25.4)", "W")
-            sMyVal = sMyVal.Replace("(DGD.dH/25.4)", "H")
-            sMyVal = sMyVal.Replace("(DGD.dT/25.4)", "T")
-         Else
-            sMyVal = sMyVal.Replace("DGD.dW", "W")
-            sMyVal = sMyVal.Replace("DGD.dH", "H")
-            sMyVal = sMyVal.Replace("DGD.dT", "T")
-         End If
+      'If sTypeVar = ConstGen.INCHES Or sTypeVar = ConstGen.MM Then
+      '   If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
+      '      sMyVal = sMyVal.Replace("(DGD.dW/25.4)", "W")
+      '      sMyVal = sMyVal.Replace("(DGD.dH/25.4)", "H")
+      '      sMyVal = sMyVal.Replace("(DGD.dT/25.4)", "T")
+      '   Else
+      '      sMyVal = sMyVal.Replace("DGD.dW", "W")
+      '      sMyVal = sMyVal.Replace("DGD.dH", "H")
+      '      sMyVal = sMyVal.Replace("DGD.dT", "T")
+      '   End If
+      'End If
+      If sMyVal.Contains("25.4") Then
+         sMyVal = sMyVal.Replace("(DGD.dW/25.4)", "W")
+         sMyVal = sMyVal.Replace("(DGD.dH/25.4)", "H")
+         sMyVal = sMyVal.Replace("(DGD.dT/25.4)", "T")
+      Else
+         sMyVal = sMyVal.Replace("(DGD.dW)", "W")
+         sMyVal = sMyVal.Replace("(DGD.dH)", "H")
+         sMyVal = sMyVal.Replace("(DGD.dT)", "T")
       End If
       Return sMyVal
    End Function