Correzione scrittura file TestHardware versione 2

Assembly/Assembly.vb

@@ -31,6 +31,13 @@ Public Class Assembly
    ' tutte queste proprietà interagiscono direttamente con le dimensioni del TELAIO
    ' per questo motivo la funzione set può ospitare la chiamata ad una funzione che modifica le dimensioni della porta
 
+   Private m_AssemblyUnit As String = ConstGen.VAL_INCHES
+   Public ReadOnly Property AssemblyUnit As String
+      Get
+         Return m_AssemblyUnit
+      End Get
+   End Property
+
 #Region "GENERAL"
 
 #Region "Light Up/Bottom"
@@ -1109,6 +1116,28 @@ Public Class Assembly
       ' se non carico nessuna informazione allora non è un assemblato, esco
       If IndexLine = 0 Then Return ResultReadingAssembInfo.MissingAssembInfo
 
+      ' Measure
+      If IndexLine < FileContent.Count - 1 Then
+         If SearchKey(FileContent(IndexLine), "Unit") Then
+            ' leggo le dimemensioni dei Jamb e restituisco la riga successiva
+            IndexLine = GetUnit(IndexLine + 1)
+            If IndexLine = -1 Then
+               ' 50102: Failed reading DDF file. Missing needed parameter {0}.
+               sErrorInfo += String.Format(EgtMsg(50102), "measures" + vbCrLf)
+               Return ResultReadingAssembInfo.ErrorInAssembInfo
+            End If
+         Else
+            IndexLine = GetUnitFromDoor(IndexLine)
+            If IndexLine = -1 Then
+               ' 50102: Failed reading DDF file. Missing needed parameter {0}.
+               sErrorInfo += String.Format(EgtMsg(50102), "measures" + vbCrLf)
+               Return ResultReadingAssembInfo.ErrorInAssembInfo
+            End If
+         End If
+      End If
+
+      IndexLine = SkipWhiteSpace(IndexLine)
+      If IndexLine = 0 Then Return ResultReadingAssembInfo.MissingAssembInfo
       ' Size
       If IndexLine < FileContent.Count - 1 Then
          If SearchKey(FileContent(IndexLine), ConstIni.S_SIZE_INI) Then
@@ -1184,7 +1213,7 @@ Public Class Assembly
       If IndexLine < FileContent.Count Then
          If SearchKey(FileContent(IndexLine), ConstIni.S_DOORS_ASSEMBY) Then
             ' assegno ad una variabile il valore in lettura
-            IndexLine = GetValue(IndexLine, ConstIni.S_DOORS_ASSEMBY, m_DoorNumber)
+            IndexLine = GetValue(IndexLine, ConstIni.S_DOORS_ASSEMBY, m_DoorNumber, False)
             ' assegno il numero di ante
             SetDoorNumber(m_DoorNumber)
             If IndexLine = -1 Then
@@ -1237,7 +1266,7 @@ Public Class Assembly
    End Function
 
    ' funzione per la ricerca dei valori, restituice la riga successiva
-   Private Function GetValue(Index As Integer, Name As String, ByRef Var As String) As Integer
+   Private Function GetValue(Index As Integer, Name As String, ByRef Var As String, Optional bConvertUnit As Boolean = True) As Integer
       If Index = -1 Then Return -1
       Dim Local_Var As String = GetValueWithKey(FileContent(Index), Name)
       If String.IsNullOrWhiteSpace(Local_Var) Then
@@ -1245,6 +1274,7 @@ Public Class Assembly
          If Not SearchKey(FileContent(Index), Name) Then Return -1
          ' altrimenti lascia il valore vuoto
       Else
+         If bConvertUnit Then ConvertDDFValueIntoCurrentUnit(m_AssemblyUnit, Local_Var)
          Var = Local_Var
       End If
       Return Index + 1
@@ -1330,6 +1360,35 @@ Public Class Assembly
       End If
    End Sub
 
+   ' Unit (Metadati Assembly)
+   Private Function GetUnit(Index As Integer) As Integer
+      If Index = -1 Then Return -1
+      Dim PreviuosIndex As Integer = Index
+      Index = GetValue(Index, "measures", m_AssemblyUnit, False)
+      Return Index
+   End Function
+
+   ' Measures (Parametri Door)
+   Private Function GetUnitFromDoor(Index As Integer) As Integer
+      ' inizio la ricerca all'interno del file
+      Dim PreviuosIndex As Integer = Index
+      Dim bUnitFound As Boolean = False
+      ' cerco la prima porta e recupero la sua unità di misura
+      While Not SearchKey(FileContent(Index), "measures") And Index < FileContent.Count - 1
+         Index += 1
+      End While
+      If SearchKey(FileContent(Index), "measures") Then
+         m_AssemblyUnit = GetValueWithKey(FileContent(Index), "measures")
+         bUnitFound = True
+      End If
+      If bUnitFound Then
+         Index = PreviuosIndex
+      Else
+         Index = -1
+      End If
+      Return Index
+   End Function
+
    ' Size
    Private Function GetSize(Index As Integer) As Integer
       If Index = -1 Then Return -1
@@ -2774,7 +2833,7 @@ Public Class Assembly
             If TBoxPar.EnableCopy Then
                TBoxNewPar.SetValue(TBoxPar.Value)
                TBoxNewPar.SetIsActive(TBoxPar.IsActive)
-            End If 
+            End If
          ElseIf TypeOf PrecCompo.CompoParamList(IndexParam) Is TextBoxParam AndAlso
             PrecCompo.CompoParamList(IndexParam).DDFName = NewCompo.CompoParamList(IndexParam).DDFName Then
             Dim TBoxPar As TextBoxParam = DirectCast(PrecCompo.CompoParamList(IndexParam), TextBoxParam)
@@ -2796,7 +2855,7 @@ Public Class Assembly
             Dim CBoxNewPar As ComboBoxParam = DirectCast(NewCompo.CompoParamList(IndexParam), ComboBoxParam)
             If CBoxNewPar.EnableCopy Then
                CBoxNewPar.SetSelItem(CBoxNewPar.ItemList(CBoxNewPar.ItemList.IndexOf(CBoxPar.SelItem)))
-            End If   
+            End If
          End If
       Next
    End Sub
@@ -3735,8 +3794,8 @@ Public Class Assembly
             End If
          End If
       Else
-            ' rimuovo dalla lista
-            If bRabbet Then Jamb.CompoList.RemoveAt(IndexCompo)
+         ' rimuovo dalla lista
+         If bRabbet Then Jamb.CompoList.RemoveAt(IndexCompo)
       End If
 
    End Sub
@@ -3763,9 +3822,9 @@ Public Class Assembly
                   TextParam.m_Value = DoubleToString(dDeltaT + dThicknessDoor, 4)
                End If
                TextParam.NotifyPropertyChanged("Value")
-               End If
-               ' depth
-               CurrCompoParam = CurrCompo.CompoParamList(2)
+            End If
+            ' depth
+            CurrCompoParam = CurrCompo.CompoParamList(2)
             If TypeOf DirectCast(CurrCompoParam, CompoParam) Is TextBoxParam Then
                Dim TextParam As TextBoxParam = DirectCast(CurrCompoParam, TextBoxParam)
                Dim sRabbetDepth As String = sOverlap

AssemblyManager/AssemblyManagerV.xaml

@@ -22,23 +22,25 @@
          <ColumnDefinition Width="Auto"/>
          <ColumnDefinition Width="Auto"/>
       </Grid.ColumnDefinitions>
-      <ListBox ItemsSource="{Binding CurrProject.AssemblyList}" 
-         SelectedItem="{Binding CurrProject.SelAssemblyName,Mode=TwoWay,UpdateSourceTrigger=PropertyChanged}"
-         Style="{StaticResource DoorListBox}" Name="AssemblyList" Grid.ColumnSpan="2" Margin="0,0,28,0.4" Grid.RowSpan="2">
+
+      <ListBox PreviewMouseWheel="ListBox_PreviewMouseWheel"
+            ItemsSource="{Binding CurrProject.AssemblyList}" 
+            SelectedItem="{Binding CurrProject.SelAssemblyName,Mode=TwoWay,UpdateSourceTrigger=PropertyChanged}"
+            Style="{StaticResource DoorListBox}" Name="AssemblyList" Grid.ColumnSpan="2" Margin="0,0,28,0.4" Grid.RowSpan="2">
          <!--SelectionChanged="AssemblyList_SelectedItem"-->
          <Interactivity:Interaction.Behaviors>
             <EgtDOORCreator:ScrollIntoViewForListBox/>
          </Interactivity:Interaction.Behaviors>
          <ListBox.ItemsPanel>
             <ItemsPanelTemplate>
-               <VirtualizingStackPanel IsItemsHost="True" Orientation="Horizontal"/>
+               <VirtualizingStackPanel Name="MyVirtual" IsItemsHost="True" Orientation="Horizontal" VirtualizationMode="Recycling"/>
             </ItemsPanelTemplate>
          </ListBox.ItemsPanel>
          <ListBox.ItemContainerStyle>
             <Style TargetType="ListBoxItem">
                <Setter Property="Template">
                   <Setter.Value>
-                     <ControlTemplate TargetType="ListBoxItem">                      
+                     <ControlTemplate TargetType="ListBoxItem">
                         <ContentPresenter/>
                      </ControlTemplate>
                   </Setter.Value>
@@ -53,7 +55,7 @@
                   Style="{StaticResource {x:Type ToggleButton}}"
                   IsChecked="{Binding Path=IsSelected, RelativeSource={
                                       RelativeSource AncestorType={x:Type ListBoxItem}}}">
-               <RadioButton.Content>
+                  <RadioButton.Content>
                      <TextBlock Text="{Binding GraphicName}"/>
                   </RadioButton.Content>
                </RadioButton>
@@ -68,7 +70,7 @@
          Focusable="False" Grid.RowSpan="2">
          <Image Source="/Resources/TopCommandBar/Add.png" Stretch="Uniform"/>
          <!--<Image Source="/Resources/TopCommandBar/NewFile.png" Stretch="Uniform"/>-->
-        </Button>
+      </Button>
       <Button Grid.Column="2"
          Height="20" Width="20" VerticalAlignment="Center"
          Margin="0,5,4.8,5.4" Command="{Binding RemoveAssembly_Command}"
@@ -76,7 +78,7 @@
          Focusable="False" Grid.RowSpan="2">
          <Image Source="/Resources/TopCommandBar/Remove.png" Stretch="Uniform"/>
          <!--<Image Source="/Resources/TopCommandBar/Delete.png" Stretch="Uniform"/>-->
-        </Button>
+      </Button>
 
    </Grid>
 </UserControl>

AssemblyManager/AssemblyManagerV.xaml.vb

@@ -2,26 +2,46 @@
 
    Private Sub Door_MouseLeftButtonUp(sender As Object, e As MouseButtonEventArgs)
       Dim Item As ListBoxItem = DirectCast(sender, ListBoxItem)
-      If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) then 
-         e.Handled=True
+      If IsNothing(Map.refAssemblyManagerVM.CurrProject.SelAssemblyName) Then
+         e.Handled = True
          Return
       End If
       ' Gestisco porta corrente modificata
-      If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified then
+      If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified Then
          If Not Map.refAssemblyManagerVM.ManageModified() Then
             Return
          End If
-         Item.IsSelected=Not Map.refAssemblyManagerVM.CurrProject.IsBlockedSelAssemblyName(DirectCast(Item.DataContext, AssemblyName))
+         Item.IsSelected = Not Map.refAssemblyManagerVM.CurrProject.IsBlockedSelAssemblyName(DirectCast(Item.DataContext, AssemblyName))
          Return
       End If
       ' verifico se il progetto cliccato è quello già selezionato
       'If Map.refAssemblyManagerVM.CurrProject.SelAssemblyName Is DirectCast(Item.DataContext, AssemblyName) Then
       ' ricarico la porta
-      e.Handled= Map.refAssemblyManagerVM.CurrProject.IsBlockedSelAssemblyName(DirectCast(Item.DataContext, AssemblyName))
+      e.Handled = Map.refAssemblyManagerVM.CurrProject.IsBlockedSelAssemblyName(DirectCast(Item.DataContext, AssemblyName))
       'End If
       'If IsModified Then
       '   Map.refAssemblyManagerVM.CurrProject.SelAssemblyName = DirectCast(Item.DataContext, AssemblyName)
       'End If
    End Sub
 
+   Private Sub ListBox_PreviewMouseWheel(sender As Object, e As MouseWheelEventArgs)
+      Dim MyList As ListBox = DirectCast(sender, ListBox)
+      Dim Index As Integer = 0
+      Dim nCountChildren As Integer = VisualTreeHelper.GetChildrenCount(MyList) - 1
+      Dim MyScroll As ScrollViewer
+      For Index = 0 To nCountChildren
+         If TypeOf VisualTreeHelper.GetChild(MyList, Index) Is ScrollViewer Then
+            MyScroll = DirectCast(VisualTreeHelper.GetChild(MyList, Index), ScrollViewer)
+            If e.Delta > 0 Then
+               MyScroll.LineLeft()
+            Else
+               MyScroll.LineRight()
+            End If
+            e.Handled = True
+            Exit For
+         End If
+      Next
+
+   End Sub
+
 End Class

CompoPanel/CompoPanelV.xaml

@@ -33,7 +33,16 @@
                Command="{Binding DataContext.CompoBtnCommand,
                                  RelativeSource={RelativeSource AncestorType={x:Type UserControl}}}"
                CommandParameter="{Binding}" 
-               Focusable="False"/>
+               Focusable="False">
+
+               <Button.ToolTip>
+                  <Image Source="{Binding ImageDoorHardware}"
+                         MaxHeight="100"
+                         MaxWidth="100"
+                         Stretch="Uniform"/>
+               </Button.ToolTip>
+
+            </Button>
          </DataTemplate>
       </ItemsControl.ItemTemplate>
    </ItemsControl>

CompoPanel/CompoPanelVM.vb

@@ -73,6 +73,7 @@ Public Class CompoPanelVM
       Dim Index As Integer = 1
       Dim CompoName As String = String.Empty
       Dim CompoNameDDF As String = String.Empty
+      Dim Image As String = String.Empty
       Dim Side As String = String.Empty
       Dim FolderName As String = String.Empty
       ' Carico un vettore con il nome delle Path delle componenti
@@ -119,11 +120,19 @@ Public Class CompoPanelVM
             ' apro ogni directory e cerco un file di testo di nome Config.ini
             Dim CurrCompoPath As String = CompoArray(Index) & "\" & ConstCompo.CONFIGINI_FILE_NAME
             If File.Exists(CurrCompoPath) Then
+               Image = String.Empty
                GetPrivateProfileCompoName(ConstCompo.S_COMPO, ConstCompo.K_NAME, CompoNameDDF, CompoName, CurrCompoPath)
+               GetPrivateProfileCompoImage(ConstCompo.S_COMPO, ConstCompo.K_IMAGE, Image, CurrCompoPath)
                GetPrivateProfileJambSide(S_POSITIONSIDE, K_SIDE, Side, CurrCompoPath)
                GetPrivateProfileFolderName(S_TEMPLATE, K_FOLDER_NAME, FolderName, CurrCompoPath)
                If CompoPanelList(IndexCompoOrder) = CompoNameDDF Then
-                  m_CompoTypeList.Add(New CompoType(CompoName, CompoNameDDF, CompoArray(Index), Side, FolderName))
+                  Dim Local_NewCompoType As CompoType
+                  If Not String.IsNullOrEmpty(Image) Then
+                     Local_NewCompoType = New CompoType(CompoName, CompoNameDDF, CompoArray(Index), Image, Side, FolderName)
+                  Else
+                     Local_NewCompoType = New CompoType(CompoName, CompoNameDDF, CompoArray(Index), Side, FolderName)
+                  End If
+                  m_CompoTypeList.Add(Local_NewCompoType)
                   ListCompoToInsert.Find(Function(x) x.sName = CompoNameDDF).SetExists(True)
                   ' aggiungere il caricamento delle liste 
                   Exit For

CompoPanel/CompoType.vb

@@ -79,6 +79,28 @@ Public Class CompoType
       m_Path = Path
    End Sub
 
+   Private m_ImageDoorHardware As String
+   Public ReadOnly Property ImageDoorHardware As String
+      Get
+         Return m_ImageDoorHardware
+      End Get
+   End Property
+   Public Sub SetImageDoorHarware(Image As String)
+      m_ImageDoorHardware = Image
+   End Sub
+
+   Private m_ShowToolTipImag As Visibility = Visibility.Collapsed
+   Public ReadOnly Property ShowToolTipImg As Visibility
+      Get
+         If Not String.IsNullOrEmpty(m_ImageDoorHardware) Then
+            m_ShowToolTipImag = Visibility.Visible
+         Else
+            m_ShowToolTipImag = Visibility.Collapsed
+         End If
+         Return m_ShowToolTipImag
+      End Get
+   End Property
+
    Private m_JambSide As String
    Public ReadOnly Property JambSide As String
       Get
@@ -125,7 +147,7 @@ Public Class CompoType
       Return other
    End Function
 
-   Sub New(sName As String, sDDFName As String, sPath As String, sJambSide As String, sFolderName As String, Optional ByVal sDDFMaterial As String = "wood")
+   Sub New(sName As String, sDDFName As String, sPath As String, sJambSide As String, sFolderName As String, Optional sDDFMaterial As String = "wood")
       m_Name = sName
       m_DDFName = sDDFName
       m_Path = sPath
@@ -135,4 +157,15 @@ Public Class CompoType
       LoadListTemplate()
    End Sub
 
+   Sub New(sName As String, sDDFName As String, sPath As String, sImage As String, sJambSide As String, sFolderName As String, Optional sDDFMaterial As String = "wood")
+      m_Name = sName
+      m_DDFName = sDDFName
+      m_Path = sPath
+      m_ImageDoorHardware = sImage
+      m_JambSide = sJambSide
+      m_FolderName = sFolderName
+      m_DDFMaterial = sDDFMaterial
+      LoadListTemplate()
+   End Sub
+
 End Class

Constants/ConstCompo.vb

@@ -16,6 +16,7 @@ Module ConstCompo
    ' Sezioni e chiavi standard del file DDF
    Public Const S_GENERALINI As String = "General"
    Public Const K_MMUNITSINI As String = "MmUnits"
+   Public Const S_VERSION As String = "version"
    Public Const S_PRODUCE As String = "produce"
    Public Const S_MEASURES As String = "measures"
    Public Const S_CODE As String = "code"
@@ -47,8 +48,9 @@ Module ConstCompo
     Public Const K_LOCKEDGE As String = "lockedge"
     Public Const K_HINGEEDGE As String = "hingeedge"
     Public Const K_TOP As String = "top"
-    Public Const K_BOTTOM As String = "bottom"
-    Public Const K_MACHINING As String = "machining"
+   Public Const K_BOTTOM As String = "bottom"
+   Public Const K_TYPEEDGE As String = "type"
+   Public Const K_MACHINING As String = "machining"
     Public Const K_OVERMATERIAL As String = "overmaterial"
    Public Const K_IDCODECOMPONENT As String = "IdCodeComponent"
    Public Const K_OTHERDOOR As String = "other_door"
@@ -59,11 +61,14 @@ Module ConstCompo
    Public Const K_THICKNESS_BOTTOM As String = "thickness bottom"
    Public Const K_DEPTH_BOTTOM As String = "depth bottom"
    Public Const K_DELTA_BOTTOM As String = "delta bottom"
+   Public Const K_HARDWARE As String = "hardware"
+   Public Const K_OPTIONS As String = "options"
 
    ' Nome, sezioni e chiavi del file Config.ini
    Public Const CONFIGINI_FILE_NAME As String = "Config.ini"
    Public Const S_COMPO As String = "Compo"
    Public Const K_NAME As String = "Name"
+   Public Const K_IMAGE As String = "Image"
    Public Const S_TEMPLATE As String = "Template"
    Public Const K_ISACTIVE As String = "IsActive"
    Public Const K_MATERIAL As String = "Material"
@@ -105,8 +110,12 @@ Module ConstCompo
 
    ' Alcune stringhe notevoli dei file DDF
    Public Const DDF_HYPHEN As String = "    - "
+   Public Const DDF_HYPHEN_2 As String = "    - "
+   Public Const DDF_SPACE2 As String = "  "
    Public Const DDF_SPACE3 As String = "   "
+   Public Const DDF_SPACE4 As String = "    "
    Public Const DDF_SPACE5 As String = "     "
+   Public Const DDF_SPACE6 As String = "      "
    Public Const DDF_METADATA As String = "##"
    Public Const DDF_ON As String = "ON"
    Public Const DDF_OFF As String = "OFF"
@@ -135,9 +144,11 @@ Module ConstCompo
    Public Const INI_COMBOBOX_ONOFF As String = "ComboBoxOnOff"
    Public Const INI_COMBOBOX_LUA As String = "ComboBoxLua"
    Public Const INI_TEXTBOX As String = "TextBox"
+   Public Const INI_TEXTBOX_D As String = "TextBox_d"
    Public Const INI_TEXTBOXDGC As String = "TextBoxDGC"
    Public Const INI_TEXTBOXTHICKNESS As String = "TextBoxThickness"
    Public Const INI_TEXTBOX_ONOFF As String = "TextBoxOnOff"
+   Public Const INI_TEXTBOX_ONOFF_D As String = "TextBoxOnOff_d"
    Public Const INI_TEXTBOXNGE As String = "TextBoxNge"
    Public Const INI_TEXTBOXLUA As String = "TextBoxLua"
    Public Const INI_CHECKBOX As String = "CheckBox"

Constants/ConstIni.vb

@@ -41,6 +41,7 @@ Module ConstIni
    Public Const K_ASKMEAGAINCONFIRM As String = "AskMeAgainConfirm"
    Public Const K_EGTCAMEXE As String = "EgtCam5Exe"
    Public Const K_REFRESHTIME As String = "RefreshTime"
+   Public Const K_DDFVERSION As String = "DDFVersion"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"

DdfFile.vb

@@ -68,11 +68,19 @@ Friend Module DdfFile
          DdfFileContent.Add("#" & PrintTitleDDFPart(Part.TypePart))
       End If
       DdfFileContent.Add("")
+      ' dal 20/04/2023 inserita gestione della versione (da configurare nel programma)
+      If OptionModule.m_sVersionDDF <> "1" Then
+         DdfFileContent.Add("version: " & OptionModule.m_sVersionDDF)
+      End If
+      DdfFileContent.Add("")
+      ' definisco se il pezzo deve essere prodotto
       DdfFileContent.Add("produce: " & If(Part.IsActive, "true", "false"))
       'Genero una lista di stringhe 
       DdfFileContent.Add("")
-      If IsNothing(Part.Measure) Then Part.Measure = ConvertMmUnitsToString(OptionModule.m_bIsMmUnit)
-      DdfFileContent.Add(ConstCompo.S_MEASURES & ": " & Part.Measure)
+      'If IsNothing(Part.Measure) Then Part.Measure = ConvertMmUnitsToString(OptionModule.m_bIsMmUnit)
+      'DdfFileContent.Add(ConstCompo.S_MEASURES & ": " & Part.Measure)
+      DdfFileContent.Add(ConstCompo.S_MEASURES & ": " & ConvertMmUnitsToString(OptionModule.m_bIsMmUnit))
+
       ' 50200=Unit measure
       CompoDoorReport.CompoParameterList.Add(New ReportParameter(EgtMsg(50200), Part.Measure))
 
@@ -101,52 +109,52 @@ Friend Module DdfFile
       TOrder.Order_ParametersList.Add(New ReportParameter("Door", Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.GraphicName))
       ' Probabilmente da cambiare
       If Not IsNothing(Part.Customer) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_CUSTOMER & ": " & Part.Customer)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_CUSTOMER & ": " & Part.Customer)
          ' 50070=Customer
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50070), Part.Customer))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50070), Part.Customer))
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_CUSTOMER & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_CUSTOMER & ": ")
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50070), ""))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50070), ""))
       End If
       If Not IsNothing(Part.Elevation) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_ELEVATION & ": " & Part.Elevation)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_ELEVATION & ": " & Part.Elevation)
          ' 50406=Elevation
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50406), Part.Elevation))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50406), Part.Elevation))
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_ELEVATION & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_ELEVATION & ": ")
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50406), ""))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50406), ""))
       End If
       If Not IsNothing(Part.Project) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PROJECT & ": " & Part.Project)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PROJECT & ": " & Part.Project)
          ' 50407=Project
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50407), Part.Project))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50407), Part.Project))
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PROJECT & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PROJECT & ": ")
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50407), ""))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50407), ""))
       End If
       If Not IsNothing(Part.PO) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PO & ": " & Part.PO)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PO & ": " & Part.PO)
          ' 50408=PO
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50408), Part.PO))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50408), Part.PO))
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PO & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PO & ": ")
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50408), ""))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50408), ""))
       End If
       If Not IsNothing(Part.Line) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LINE & ": " & Part.Line)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LINE & ": " & Part.Line)
          ' 50409=Line
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50409), Part.Line))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50409), Part.Line))
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LINE & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LINE & ": ")
          OrderInReport.OrderParameterList.Add(New ReportParameter(EgtMsg(50409), ""))
          TOrder.Order_ParametersList.Add(New ReportParameter(EgtMsg(50409), ""))
       End If
@@ -165,9 +173,9 @@ Friend Module DdfFile
             ' il posizionamento della prima porta sta nell'origine
             If Part.TypePart = ConstGen.PART_DO_ & "1" Then
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & "0")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & "0")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & "0")
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & "0")
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & "0")
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & "0")
             ElseIf Part.TypePart = ConstGen.PART_DO_ & "2" Then
                ' si trova traslata verso destra dello spessore DO_1 sommato a LightLock"
                Dim x_DO_1 As Double = 0.0
@@ -179,30 +187,30 @@ Friend Module DdfFile
                StringToDouble(Map.refAssemblyPageVM.CurrAssembly.LightLock, dLightLock)
                Dim x As String = DoubleToString(x_DO_1 + dLightLock, 4)
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & x)
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & "0")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & "0")
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & x)
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & "0")
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & "0")
                ' Jamb Sinistro serratura
             ElseIf Part.TypePart.Contains(ConstGen.PART_FRAME_LEFT) Then
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & PositionJamb_X(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & PositionJamb_Y(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & PositionJamb_Z(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & PositionJamb_X(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & PositionJamb_Y(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & PositionJamb_Z(Part))
             ElseIf Part.TypePart.Contains(ConstGen.PART_FRAME_RIGHT) Then
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & PositionJamb_X(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & PositionJamb_Y(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & PositionJamb_Z(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & PositionJamb_X(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & PositionJamb_Y(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & PositionJamb_Z(Part))
             ElseIf Part.TypePart.Contains(ConstGen.PART_FRAME_TOP) Then
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & PositionJamb_X(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & PositionJamb_Y(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & PositionJamb_Z(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & PositionJamb_X(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & PositionJamb_Y(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & PositionJamb_Z(Part))
             ElseIf Part.TypePart.Contains(ConstGen.PART_FRAME_BOTTOM) Then
                DdfFileContent.Add("position: ")
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "x: " & PositionJamb_X(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "y: " & PositionJamb_Y(Part))
-               DdfFileContent.Add(ConstCompo.DDF_SPACE3 & "z: " & PositionJamb_Z(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "x: " & PositionJamb_X(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "y: " & PositionJamb_Y(Part))
+               DdfFileContent.Add(m_sSpace1Tab & "z: " & PositionJamb_Z(Part))
             End If
             DdfFileContent.Add("")
          End If
@@ -216,9 +224,9 @@ Friend Module DdfFile
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & Part.Width)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & Part.Width)
          End If
       End If
       ' 50001=Width
@@ -230,9 +238,9 @@ Friend Module DdfFile
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & Part.Height)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & Part.Height)
          End If
       End If
       ' 50002=Height
@@ -244,9 +252,9 @@ Friend Module DdfFile
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & Part.Thickness)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & Part.Thickness)
          End If
       End If
       ' 50003=Thickness
@@ -355,53 +363,68 @@ Friend Module DdfFile
       DdfFileContent.Add("" & ConstCompo.S_PROFILES & ":")
       Dim TProfile As New TableProfile
       Dim BevelDDF As String = SetBevel(Part.TypePart, Part.LockEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name, Part.InvertBevel)
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LOCKEDGE & ": " & BevelDDF)
+      If OptionModule.m_sVersionDDF = "2" Then ' K_TYPE
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LOCKEDGE & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & BevelDDF)
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LOCKEDGE & ": " & BevelDDF)
+      End If
       ' 50005=Lock edge
       CompoDoorReport.CompoParameterList.Add(New ReportParameter(EgtMsg(50005), BevelDDF))
       TProfile.Profile_ParametersList.Add(New ReportParameter(EgtMsg(50005), BevelDDF))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.LockEdgeMachining))
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.LockEdgeMachining))
       If Not StringToDouble(Part.LockEdgeOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_LOCKEDGEOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.LockEdgeOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.LockEdgeOverMaterial)
          End If
       End If
 
       BevelDDF = SetBevel(Part.TypePart, Part.HingeEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name)
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HINGEEDGE & ": " & BevelDDF)
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HINGEEDGE & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & BevelDDF)
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HINGEEDGE & ": " & BevelDDF)
+      End If
       ' 50006=Hinge edge
       CompoDoorReport.CompoParameterList.Add(New ReportParameter(EgtMsg(50006), BevelDDF))
       TProfile.Profile_ParametersList.Add(New ReportParameter(EgtMsg(50006), BevelDDF))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.HingeEdgeMachining))
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.HingeEdgeMachining))
       If Not StringToDouble(Part.HingeEdgeOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_HINGEDGEOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.HingeEdgeOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.HingeEdgeOverMaterial)
          End If
       End If
 
       BevelDDF = SetBevel(Part.TypePart, Part.TopType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name)
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_TOP & ": " & BevelDDF)
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_TOP & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & BevelDDF)
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_TOP & ": " & BevelDDF)
+      End If
       ' 50007=Top
       CompoDoorReport.CompoParameterList.Add(New ReportParameter(EgtMsg(50007), BevelDDF))
       TProfile.Profile_ParametersList.Add(New ReportParameter(EgtMsg(50007), BevelDDF))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.TopMachining))
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.TopMachining))
       If Not StringToDouble(Part.TopOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_TOPOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.TopOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.TopOverMaterial)
          End If
       End If
 
@@ -411,9 +434,9 @@ Friend Module DdfFile
             Return
          Else
             If bIsDDF Then
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_RADIUS & ": " & DoubleToString(dVal, 5))
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_RADIUS & ": " & DoubleToString(dVal, 5))
             Else
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_RADIUS & ": " & Part.Radius)
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_RADIUS & ": " & Part.Radius)
             End If
          End If
 
@@ -422,9 +445,9 @@ Friend Module DdfFile
             Return
          Else
             If bIsDDF Then
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_POSX & ": " & DoubleToString(dVal, 5))
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_POSX & ": " & DoubleToString(dVal, 5))
             Else
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_POSX & ": " & Part.Posx)
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_POSX & ": " & Part.Posx)
             End If
          End If
          ' 50707=Top Arc
@@ -444,9 +467,9 @@ Friend Module DdfFile
             Return
          Else
             If bIsDDF Then
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_POSX & ": " & DoubleToString(dVal, 5))
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_POSX & ": " & DoubleToString(dVal, 5))
             Else
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_POSX & ": " & Part.PosxAngle)
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_POSX & ": " & Part.PosxAngle)
             End If
          End If
 
@@ -455,9 +478,9 @@ Friend Module DdfFile
             Return
          Else
             If bIsDDF Then
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_ANGLE & ": " & DoubleToString(dVal, 5))
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_ANGLE & ": " & DoubleToString(dVal, 5))
             Else
-               DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_ANGLE & ": " & Part.Angle)
+               DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_ANGLE & ": " & Part.Angle)
             End If
          End If
          ' 50708=Top Angle
@@ -472,28 +495,43 @@ Friend Module DdfFile
       End If
 
       BevelDDF = SetBevel(Part.TypePart, Part.BottomType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name)
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_BOTTOM & ": " & BevelDDF)
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_BOTTOM & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & BevelDDF)
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_BOTTOM & ": " & BevelDDF)
+      End If
       ' 50008=Bottom
       CompoDoorReport.CompoParameterList.Add(New ReportParameter(EgtMsg(50008), BevelDDF))
       TProfile.Profile_ParametersList.Add(New ReportParameter(EgtMsg(50008), BevelDDF))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.BottomMachining))
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.BottomMachining))
       If Not StringToDouble(Part.BottomOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_BOTTOMOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       Else
          If bIsDDF Then
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
          Else
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.BottomOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.BottomOverMaterial)
          End If
       End If
       DoorExists = True
 
+      DdfFileContent.Add(" ")
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(ConstCompo.K_HARDWARE & ": ")
+      End If
       ' Riordino e stampo le compo
       SearchCompo(DdfFileContent, Part, bIsDDF)
       If Not Directory.Exists(Path.GetDirectoryName(sPath)) Then
          Directory.CreateDirectory(Path.GetDirectoryName(sPath))
       End If
+
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(ConstCompo.K_OPTIONS & ": ")
+         DdfFileContent.Add(Part.sOptions)
+      End If
+
       DdfFileContent.Add(" ")
       DdfFileContent.Add("# End Part")
       ' se sono arrivato fin qui significa che tutto è andato a buon fine (posso quindisalvare il file corrente)
@@ -530,6 +568,11 @@ Friend Module DdfFile
       If Not String.IsNullOrEmpty(CurrHardwareReference) Then
          DdfFileContent.Add("#" & CurrHardwareReference)
       End If
+      ' dal 20/04/2023 inserita gestione della versione (da configurare nel programma)
+      If OptionModule.m_sVersionDDF <> "1" Then
+         DdfFileContent.Add("")
+         DdfFileContent.Add("version: " & OptionModule.m_sVersionDDF)
+      End If
       DdfFileContent.Add("")
       DdfFileContent.Add("produce: " & If(Part.IsActive, "true", "false"))
       'Genero una lista di stringhe 
@@ -556,29 +599,29 @@ Friend Module DdfFile
       DdfFileContent.Add(ConstCompo.S_ORDER & ":")
       ' Probabilmente da cambiare
       If Not IsNothing(Part.Customer) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_CUSTOMER & ": " & Part.Customer)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_CUSTOMER & ": " & Part.Customer)
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_CUSTOMER & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_CUSTOMER & ": ")
       End If
       If Not IsNothing(Part.Elevation) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_ELEVATION & ": " & Part.Elevation)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_ELEVATION & ": " & Part.Elevation)
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_ELEVATION & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_ELEVATION & ": ")
       End If
       If Not IsNothing(Part.Project) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PROJECT & ": " & Part.Project)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PROJECT & ": " & Part.Project)
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PROJECT & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PROJECT & ": ")
       End If
       If Not IsNothing(Part.PO) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PO & ": " & Part.PO)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PO & ": " & Part.PO)
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_PO & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_PO & ": ")
       End If
       If Not IsNothing(Part.Line) Then
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LINE & ": " & Part.Line)
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LINE & ": " & Part.Line)
       Else
-         DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LINE & ": ")
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LINE & ": ")
       End If
       ' aggiungo una riga vuota per separare la lista successiva
       DdfFileContent.Add("")
@@ -600,11 +643,11 @@ Friend Module DdfFile
          ' ConvertCurrentUnitMeasure(sVal)
          'Part.SetWidth(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & Part.Width)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_WIDTH & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & Part.Width)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_WIDTH & ": " & sVal)
          End If
       End If
 
@@ -616,11 +659,11 @@ Friend Module DdfFile
          ' ConvertCurrentUnitMeasure(sVal)
          'Part.SetHeight(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & Part.Height)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HEIGHT & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & Part.Height)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HEIGHT & ": " & sVal)
          End If
 
       End If
@@ -633,11 +676,11 @@ Friend Module DdfFile
          ' ConvertCurrentUnitMeasure(sVal)
          'Part.SetThickness(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & Part.Thickness)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_THICKNESS & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & Part.Thickness)
+            DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_THICKNESS & ": " & sVal)
          End If
       End If
       ' aggiungo una riga vuota per separare la lista successiva
@@ -662,8 +705,13 @@ Friend Module DdfFile
       End If
       '----------------------------------------------------------------------------------------------------------------------------------------------------
       DdfFileContent.Add("" & ConstCompo.S_PROFILES & ":")
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_LOCKEDGE & ": " & SetBevel(Part.TypePart, Part.LockEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name, Part.InvertBevel))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.LockEdgeMachining))
+      If OptionModule.m_sVersionDDF = "2" Then ' K_TYPE
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LOCKEDGE & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & SetBevel(Part.TypePart, Part.LockEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name, Part.InvertBevel))
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_LOCKEDGE & ": " & SetBevel(Part.TypePart, Part.LockEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name, Part.InvertBevel))
+      End If
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.LockEdgeMachining))
       If Not StringToDouble(Part.LockEdgeOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_LOCKEDGEOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
@@ -671,15 +719,20 @@ Friend Module DdfFile
          sVal = Part.LockEdgeOverMaterial
          ' ConvertCurrentUnitMeasure(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.LockEdgeOverMaterial)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.LockEdgeOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          End If
       End If
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_HINGEEDGE & ": " & SetBevel(Part.TypePart, Part.HingeEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.HingeEdgeMachining))
+      If OptionModule.m_sVersionDDF = "2" Then ' K_TYPE
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HINGEEDGE & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & SetBevel(Part.TypePart, Part.HingeEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_HINGEEDGE & ": " & SetBevel(Part.TypePart, Part.HingeEdgeType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      End If
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.HingeEdgeMachining))
       If Not StringToDouble(Part.HingeEdgeOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_HINGEDGEOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
@@ -687,15 +740,20 @@ Friend Module DdfFile
          sVal = Part.HingeEdgeOverMaterial
          ConvertCurrentUnitMeasure(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.HingeEdgeOverMaterial)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.HingeEdgeOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          End If
       End If
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_TOP & ": " & SetBevel(Part.TypePart, Part.TopType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.TopMachining))
+      If OptionModule.m_sVersionDDF = "2" Then ' K_TYPE
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_TOP & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & SetBevel(Part.TypePart, Part.TopType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_TOP & ": " & SetBevel(Part.TypePart, Part.TopType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      End If
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.TopMachining))
       If Not StringToDouble(Part.TopOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_TOPOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
@@ -703,15 +761,20 @@ Friend Module DdfFile
          sVal = Part.TopOverMaterial
          ' ConvertCurrentUnitMeasure(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.TopOverMaterial)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.TopOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          End If
       End If
-      DdfFileContent.Add(ConstCompo.DDF_SPACE3 & ConstCompo.K_BOTTOM & ": " & SetBevel(Part.TypePart, Part.BottomType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
-      DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.BottomMachining))
+      If OptionModule.m_sVersionDDF = "2" Then ' K_TYPE
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_BOTTOM & ": ")
+         DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_TYPEEDGE & ": " & SetBevel(Part.TypePart, Part.BottomType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      Else
+         DdfFileContent.Add(m_sSpace1Tab & ConstCompo.K_BOTTOM & ": " & SetBevel(Part.TypePart, Part.BottomType.Name, Part.DispositionItem.Name, Part.SwingAlias.Name))
+      End If
+      DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_MACHINING & ": " & ConvertBooleanToOnOff(Part.BottomMachining))
       If Not StringToDouble(Part.BottomOverMaterial, dVal) Then
          MessageBox.Show(String.Format(EgtMsg(50141), K_BOTTOMOVERMATERIAL_INI), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
@@ -719,13 +782,18 @@ Friend Module DdfFile
          sVal = Part.BottomOverMaterial
          ' ConvertCurrentUnitMeasure(sVal)
          If bIsDDF Then
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & DoubleToString(dVal, 5))
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          Else
-            'DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & Part.BottomOverMaterial)
-            DdfFileContent.Add(ConstCompo.DDF_SPACE5 & ConstCompo.K_OVERMATERIAL & ": " & sVal)
+            'DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & Part.BottomOverMaterial)
+            DdfFileContent.Add(m_sSpace2Tab & ConstCompo.K_OVERMATERIAL & ": " & sVal)
          End If
       End If
+
+      DdfFileContent.Add(" ")
+      If OptionModule.m_sVersionDDF = "2" Then
+         DdfFileContent.Add(ConstCompo.K_HARDWARE & ": ")
+      End If
       ' Riordino e stampo le compo
       SearchCompo(DdfFileContent, Part, bIsDDF)
       If Not Directory.Exists(Path.GetDirectoryName(sPath)) Then
@@ -956,7 +1024,9 @@ Friend Module DdfFile
       Dim NewCompoNameDDF = False
       Dim WritingError As String = String.Empty
       Dim TempList As New ObservableCollection(Of Compo)
-      DdfFileContent.Add("")
+      If OptionModule.m_sVersionDDF = "1" Then
+         DdfFileContent.Add("")
+      End If
       '------------------------------------------------------------------------------------------------------------------------------------------
       ' cerco la prima componente da aggiungere alla lista delle componenti
       For Index1 = 0 To DdfFile.CompoListOrder.Count() - 1
@@ -1063,15 +1133,15 @@ Friend Module DdfFile
       ' se il nome non esiste ancora nella lista lo aggiungo
       If bNewCompoNameDDF Then
          ' aggiungo il nome DDF della componente
-         CompoListDDF.Add(Compo.CompoType.DDFName & ":")
+         CompoListDDF.Add(m_sSpaceTabCompo & Compo.CompoType.DDFName & ":")
       End If
       ' se esiste il template
       If Not String.IsNullOrWhiteSpace(Compo.TemplateDDFName) Then
          ' aggiungo "    - nomeTemplate: TemplateSelezionato"
          If Compo.LoadByDefault And Not SaveErrorCompo Then
-            CompoListDDF.Add(DDF_METADATA & DDF_HYPHEN & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
+            CompoListDDF.Add(DDF_METADATA & OptionModule.m_sSpaceHype & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
          ElseIf Compo.LoadByDefault And SaveErrorCompo Then
-            CompoListDDF.Add(DDF_HYPHEN & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
+            CompoListDDF.Add(OptionModule.m_sSpaceHype & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
             If Not String.IsNullOrEmpty(sErrorList) Then sErrorList &= Environment.NewLine
             ' 50563=Compo {0} does not exist.
             sErrorList &= String.Format(EgtMsg(50563), Compo.SelBrandPart & "\" & Compo.SelFile)
@@ -1083,7 +1153,7 @@ Friend Module DdfFile
             End If
             ParamInCompoIsCorrect = False
          Else
-            CompoListDDF.Add(DDF_HYPHEN & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
+            CompoListDDF.Add(OptionModule.m_sSpaceHype & Compo.TemplateDDFName & ": " & Compo.TemplateSelItem)
          End If
 
       End If
@@ -1108,9 +1178,9 @@ Friend Module DdfFile
                   ' restituisco il valore DDF della lista associato all'indice passato
                   Dim SelItemDDF As String = Trim(cbParam.ItemListDDF(IndexDDF))
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   End If
                Else
                   ' se non è selezionato nessun elemento (cosa impossibile...)
@@ -1136,9 +1206,9 @@ Friend Module DdfFile
                   ' restituisco il valore DDF della lista associato all'indice passato
                   Dim SelItemDDF As String = Trim(cbParam.ItemListDDF(IndexDDF))
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   End If
                Else
                   ' se non è selezionato nessun elemento (cosa impossibile...)
@@ -1147,9 +1217,9 @@ Friend Module DdfFile
                   sErrorList &= String.Format(EgtMsg(50125), cbParam.Name, Compo.CompoType.DDFName)
                   ParamInCompoIsCorrect = False
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                     CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                   End If
                End If
             ElseIf Not cbParam.ErrorInReading And cbParam.MissingParameterInReading Then
@@ -1164,9 +1234,9 @@ Friend Module DdfFile
                   ' restituisco il valore DDF della lista associato all'indice passato
                   Dim SelItemDDF As String = Trim(cbParam.ItemListDDF(IndexDDF))
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & SelItemDDF)
+                     CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & SelItemDDF)
                   End If
                Else
                   ' se non è selezionato nessun elemento (cosa impossibile...)
@@ -1175,9 +1245,9 @@ Friend Module DdfFile
                   sErrorList &= String.Format(EgtMsg(50125), cbParam.Name, Compo.CompoType.DDFName)
                   ParamInCompoIsCorrect = False
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                     CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                   End If
                End If
             Else
@@ -1185,9 +1255,9 @@ Friend Module DdfFile
                sErrorList &= String.Format(EgtMsg(50125), cbParam.Name, Compo.CompoType.DDFName)
                ParamInCompoIsCorrect = False
                If Compo.LoadByDefault And Not SaveErrorCompo Then
-                  CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                  CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                Else
-                  CompoListDDF.Add(DDF_SPACE5 & cbParam.DDFName & ": " & cbParam.SelItem)
+                  CompoListDDF.Add(m_sSpace3Tab & cbParam.DDFName & ": " & cbParam.SelItem)
                End If
             End If
             ' TextBox Opzionale
@@ -1200,24 +1270,24 @@ Friend Module DdfFile
                   ' 50122: Error reading {0} param in {1} compo.
                   sErrorList &= String.Format(EgtMsg(50122), tboParam.Name, Compo.CompoType.DDFName)
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tboParam.DDFName & ": ")
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tboParam.DDFName & ": ")
                      ParamInCompoIsCorrect = False
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & tboParam.DDFName & ": " & tboParam.Value)
+                     CompoListDDF.Add(m_sSpace3Tab & tboParam.DDFName & ": " & tboParam.Value)
                      ParamInCompoIsCorrect = False
                   End If
                Else
                   If bIsDDF Then
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tboParam.DDFName & ": " & tboParam.ToolTipValue)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tboParam.DDFName & ": " & tboParam.ToolTipValue)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tboParam.DDFName & ": " & tboParam.ToolTipValue)
+                        CompoListDDF.Add(m_sSpace3Tab & tboParam.DDFName & ": " & tboParam.ToolTipValue)
                      End If
                   Else
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tboParam.DDFName & ": " & tboParam.Value)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tboParam.DDFName & ": " & tboParam.Value)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tboParam.DDFName & ": " & tboParam.Value)
+                        CompoListDDF.Add(m_sSpace3Tab & tboParam.DDFName & ": " & tboParam.Value)
                      End If
                   End If
                End If
@@ -1235,24 +1305,24 @@ Friend Module DdfFile
                   ' 50122: Error reading {0} param in {1} compo.
                   sErrorList &= String.Format(EgtMsg(50122), tbParam.Name, Compo.CompoType.DDFName)
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      ParamInCompoIsCorrect = False
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                     CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      ParamInCompoIsCorrect = False
                   End If
                Else
                   If bIsDDF Then
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.ToolTipValue)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.ToolTipValue)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.ToolTipValue)
+                        CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.ToolTipValue)
                      End If
                   Else
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                        CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      End If
                   End If
                End If
@@ -1265,24 +1335,24 @@ Friend Module DdfFile
                   ' 50122: Error reading {0} param in {1} compo.
                   sErrorList &= String.Format(EgtMsg(50122), tbParam.Name, Compo.CompoType.DDFName)
                   If Compo.LoadByDefault And Not SaveErrorCompo Then
-                     CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                     CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      ParamInCompoIsCorrect = False
                   Else
-                     CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                     CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      ParamInCompoIsCorrect = False
                   End If
                Else
                   If bIsDDF Then
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.ToolTipValue)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.ToolTipValue)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.ToolTipValue)
+                        CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.ToolTipValue)
                      End If
                   Else
                      If Compo.LoadByDefault And Not SaveErrorCompo Then
-                        CompoListDDF.Add(DDF_METADATA & DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                        CompoListDDF.Add(DDF_METADATA & m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      Else
-                        CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+                        CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
                      End If
                   End If
                End If
@@ -1290,7 +1360,7 @@ Friend Module DdfFile
                If Not String.IsNullOrEmpty(sErrorList) Then sErrorList &= Environment.NewLine
                ' 50122: Error reading {0} param in {1} compo.
                sErrorList &= String.Format(EgtMsg(50122), tbParam.Name, Compo.CompoType.DDFName)
-               CompoListDDF.Add(DDF_SPACE5 & tbParam.DDFName & ": " & tbParam.Value)
+               CompoListDDF.Add(m_sSpace3Tab & tbParam.DDFName & ": " & tbParam.Value)
             End If
          End If
       Next
@@ -1298,33 +1368,33 @@ Friend Module DdfFile
       If Not IsNothing(Compo.refJambCompo) Then
          ' stampo una componente dell'anta
          If Not String.IsNullOrEmpty(Compo.IdCode) AndAlso Trim(Compo.refJambCompo.IdCode) = Trim(Compo.IdCode) Then
-            CompoListDDF.Add(DDF_SPACE5 & "##IdCodeComponent : " & Compo.IdCode)
+            CompoListDDF.Add(m_sSpace3Tab & "##IdCodeComponent : " & Compo.IdCode)
          Else
             Compo.IdCode = CStr(IdIndex)
             Compo.refJambCompo.IdCode = Trim(Compo.IdCode)
-            CompoListDDF.Add(DDF_SPACE5 & "##IdCodeComponent : " & Compo.IdCode)
+            CompoListDDF.Add(m_sSpace3Tab & "##IdCodeComponent : " & Compo.IdCode)
          End If
          IdIndex += 1
       ElseIf Not IsNothing(Compo.refCompoDoor) Then
          ' stampo una componente sul telaio 
          If Not String.IsNullOrEmpty(Compo.refCompoDoor.IdCode) Then
             If Compo.OtherDoor Then
-               CompoListDDF.Add(DDF_SPACE5 & "other_door: 1")
+               CompoListDDF.Add(m_sSpace3Tab & "other_door: 1")
             End If
             Compo.IdCode = Compo.refCompoDoor.IdCode
             If Compo.MatchedDoor Then
                ' solo per il caso di sue ante
-               CompoListDDF.Add(DDF_SPACE5 & "##IdCodeComponent : " & Compo.IdCode & " , Matched")
+               CompoListDDF.Add(m_sSpace3Tab & "##IdCodeComponent : " & Compo.IdCode & " , Matched")
             Else
-               CompoListDDF.Add(DDF_SPACE5 & "##IdCodeComponent : " & Compo.IdCode)
+               CompoListDDF.Add(m_sSpace3Tab & "##IdCodeComponent : " & Compo.IdCode)
             End If
 
          End If
       ElseIf Not String.IsNullOrEmpty(Compo.IdCode) Then
          If Compo.OtherDoor Then
-            CompoListDDF.Add(DDF_SPACE5 & "other_door: 1")
+            CompoListDDF.Add(m_sSpace3Tab & "other_door: 1")
          End If
-         CompoListDDF.Add(DDF_SPACE5 & "##IdCodeComponent : " & Compo.IdCode)
+         CompoListDDF.Add(m_sSpace3Tab & "##IdCodeComponent : " & Compo.IdCode)
          IdIndex += 1
       End If
       Return CompoListDDF
@@ -1440,18 +1510,18 @@ Friend Module DdfFile
          If InvertBevel Then
             ' If sCurrBevel = ConstGen.BEVEL_GRAPHIC And DispositionItem = ConstGen.BEVEL_DOWN Then
             If sCurrBevel.Contains(ConstGen.BEVEL_GRAPHIC) And DispositionItem = ConstGen.BEVEL_DOWN Then
-               Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_UP) & ConstCompo.DDF_SPACE3 & " ## Inverted"
-               ' Return ConstGen.BEVEL_UP & ConstCompo.DDF_SPACE3 & " ## Inverted"
+               Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_UP) & m_sSpace1Tab & " ## Inverted"
+               ' Return ConstGen.BEVEL_UP & m_sSpace1Tab & " ## Inverted"
             ElseIf sCurrBevel.Contains(ConstGen.BEVEL_GRAPHIC) And DispositionItem = ConstGen.BEVEL_UP Then
-               Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_DOWN) & ConstCompo.DDF_SPACE3 & " ## Inverted"
-               'Return ConstGen.BEVEL_DOWN & ConstCompo.DDF_SPACE3 & " ## Inverted"
+               Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_DOWN) & m_sSpace1Tab & " ## Inverted"
+               'Return ConstGen.BEVEL_DOWN & m_sSpace1Tab & " ## Inverted"
             ElseIf sCurrBevel.Contains(ConstGen.BEVEL_GRAPHIC) And DispositionItem <> ConstGen.BEVEL_UP And DispositionItem <> ConstGen.BEVEL_DOWN Then
                If sSwing.Contains(ConstGen.HAND_REVERSE) Then
-                  Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_UP) & ConstCompo.DDF_SPACE3 & " ## Inverted"
-                  'Return ConstGen.BEVEL_UP & ConstCompo.DDF_SPACE3 & " ## Inverted"
+                  Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_UP) & m_sSpace1Tab & " ## Inverted"
+                  'Return ConstGen.BEVEL_UP & m_sSpace1Tab & " ## Inverted"
                Else
-                  Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_DOWN) & ConstCompo.DDF_SPACE3 & " ## Inverted"
-                  'Return ConstGen.BEVEL_DOWN & ConstCompo.DDF_SPACE3 & " ## Inverted"
+                  Return sCurrBevel.Replace(ConstGen.BEVEL_GRAPHIC, ConstGen.BEVEL_DOWN) & m_sSpace1Tab & " ## Inverted"
+                  'Return ConstGen.BEVEL_DOWN & m_sSpace1Tab & " ## Inverted"
                End If
             Else
                Return sCurrBevel
@@ -1540,6 +1610,13 @@ Friend Module DdfFile
       GeneralAssembly.Add("#EGTDOORCREATOR")
       GeneralAssembly.Add("#GENERAL ASSEMBLY")
       GeneralAssembly.Add("#")
+
+      ' dalla veresione 2.4l1 per gestione conversione mm/inch e viceversa
+      GeneralAssembly.Add(ConstCompo.DDF_METADATA & "Unit : ")
+      GeneralAssembly.Add(ConstCompo.DDF_METADATA & "measures : " & ConvertMmUnitsToString(OptionModule.m_bIsMmUnit))
+      GeneralAssembly.Add(DDF_METADATA)
+
+      ' dati assemblato
       GeneralAssembly.Add(ConstCompo.DDF_METADATA & "Size : ")
       If StringToDouble(CurrAssembly.Thickness, dVal) Then
          GeneralAssembly.Add(ConstCompo.DDF_METADATA & "thickness : " & DoubleToString(dVal, 5))

DoorParameters/Compo.vb

@@ -1134,7 +1134,7 @@ Public Class Compo
             
             Return True
 
-         Case INI_TEXTBOX
+         Case INI_TEXTBOX, INI_TEXTBOX_D
             ' NomeDDF e Nome del Text
             Dim sTextList() As String = sItems(1).Split("/"c)
             Dim sDDFName As String = String.Empty
@@ -1150,20 +1150,30 @@ Public Class Compo
             ' Se ci sono 2 elementi "TextBox; NomeDDF/Nome"
             If sItems.Count < 3 Then
                NewCompoParam = New TextBoxParam(sDDFName, sName, Me, "0.000", Nothing, Nothing)
+               If Trim(sItems(0)).EndsWith("d"c) Then
+                  Dim Loc_TextBox_d As TextBoxParam = DirectCast(NewCompoParam, TextBoxParam)
+                  Loc_TextBox_d.bIsLen = False
+                  NewCompoParam = Loc_TextBox_d
+               End If
                ' Errore nella lettura {0} nel parametro {1} della componente: non esiste il valore. 
                sErrorList = ConcatErrorString(sErrorList, String.Format(EgtMsg(50125), sName, m_CompoType.DDFName))
                Return True
             End If
             ' recupero il valore di default
             Dim dHeight As Double = 500       ' Attenzione ai mm
-            If Not ConvertCompoConfig(sItems(2), dHeight) Then
+            If Not Trim(sItems(0)).EndsWith("d"c) AndAlso Not ConvertCompoConfig(sItems(2), dHeight) Then
                sErrorList = ConcatErrorString(sErrorList, String.Format(EgtMsg(50147), sName, sItems(2)))
             End If
 
             NewCompoParam = New TextBoxParam(sDDFName, sName, Me, sItems(2), Nothing, Nothing)
+            If Trim(sItems(0)).EndsWith("d"c) Then
+               Dim Loc_TextBox_d As TextBoxParam = DirectCast(NewCompoParam, TextBoxParam)
+               Loc_TextBox_d.bIsLen = False
+               NewCompoParam = Loc_TextBox_d
+            End If
             Return True
 
-         Case INI_TEXTBOX_ONOFF
+         Case INI_TEXTBOX_ONOFF, INI_TEXTBOX_ONOFF_D
             ' NomeDDF e Nome del Text
             Dim sTextList() As String = sItems(1).Split("/"c)
             Dim sDDFName As String = String.Empty
@@ -1179,6 +1189,11 @@ Public Class Compo
             ' Se ci sono 2 elementi "TextBox; NomeDDF/Nome"
             If sItems.Count < 3 Then
                NewCompoParam = New TextBoxOnOffParam(sDDFName, sName, Me, "0.000", Nothing, Nothing, False)
+               If Trim(sItems(0)).EndsWith("d"c) Then
+                  Dim Loc_TextBox_d As TextBoxOnOffParam = DirectCast(NewCompoParam, TextBoxOnOffParam)
+                  Loc_TextBox_d.bIsLen = False
+                  NewCompoParam = Loc_TextBox_d
+               End If
                ' Errore nella lettura {0} nel parametro {1} della componente: non esiste il valore. 
                sErrorList = ConcatErrorString(sErrorList, String.Format(EgtMsg(50125), sName, m_CompoType.DDFName))
                Return True
@@ -1191,12 +1206,16 @@ Public Class Compo
 
             ' recupero il valore di default
             Dim dHeight As Double = 500       ' Attenzione ai mm
-            If Not ConvertCompoConfig(sItems(2), dHeight) Then
+            If Not Trim(sItems(0)).EndsWith("d"c) AndAlso Not ConvertCompoConfig(sItems(2), dHeight) Then
                sErrorList = ConcatErrorString(sErrorList, String.Format(EgtMsg(50147), sName, sItems(2)))
             End If
 
             NewCompoParam = New TextBoxOnOffParam(sDDFName, sName, Me, sItems(2), Nothing, Nothing, bActiveBox)
-
+            If Trim(sItems(0)).EndsWith("d"c) Then
+               Dim Loc_TextBox_d As TextBoxOnOffParam = DirectCast(NewCompoParam, TextBoxOnOffParam)
+               Loc_TextBox_d.bIsLen = False
+               NewCompoParam = Loc_TextBox_d
+            End If
             Return True
 
       End Select
@@ -2367,6 +2386,17 @@ Public Class TextBoxParam
    Shared m_PrecCompoIdCode As String = "-1"
    Shared m_PrecNameParam As String = String.Empty
 
+   ' utilizzata per riconoscere se il valore della text deve essere convertito mm/inch o viceversa
+   Private m_bIsLen As Boolean = True
+   Public Property bIsLen As Boolean
+      Get
+         Return m_bIsLen
+      End Get
+      Set(value As Boolean)
+         m_bIsLen = value
+      End Set
+   End Property
+
    ' utilizzato negli Hardware 
    Private m_TypeVar As String
    Public Property TypeVar As String

DoorParameters/Part.vb

@@ -46,6 +46,18 @@ Public Class Part
       End Set
    End Property
 
+   ' per sapere quale tipo versione è il file
+   Private m_Version As String = "1"
+   Public Property Version As String
+      Get
+         Return m_Version
+      End Get
+      Set(value As String)
+         m_Version = value
+         RegexFunction.sCurrVersionDoor = m_Version
+      End Set
+   End Property
+
    ' per sapere se il check è attivo (nella modalità assembalto)
    Private m_IsActive As Boolean
    Public Property IsActive As Boolean
@@ -1149,6 +1161,21 @@ Public Class Part
 
 #End Region    ' Top Angle
 
+#Region "OPTIONS"
+
+   Private m_sOptions As String = String.Empty
+
+   Public Property sOptions As String
+      Get
+         Return m_sOptions
+      End Get
+      Set(value As String)
+         m_sOptions = value
+      End Set
+   End Property
+
+#End Region    ' Options
+
 #End Region    ' General
 
    ' lista delle componenti
@@ -1543,7 +1570,8 @@ Public Class Part
       'Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nNothingSelected
       ReadDoor.FileContent = ArrayFile
       ReadDoor.m_TypePart = ConstGen.PART_DO_ & "1"
-
+      ' Imposto di default la porta in lettura è versione 1
+      ReadDoor.Version = "1"
       ' Se il file DDF è vuoto
       If ReadDoor.FileContent.Count = 0 Then
          ' 50107 = Empty file.
@@ -1565,6 +1593,8 @@ Public Class Part
          ' Processo la sezione
          Dim sSection As String = GetName(sLine)
          Select Case sSection
+            Case S_VERSION
+               LineIndex = ReadDoor.GetVersion(LineIndex)
             Case S_PRODUCE
                LineIndex = ReadDoor.GetProduce(LineIndex)
             Case S_MEASURES
@@ -1685,6 +1715,10 @@ Public Class Part
                   sErrorInfo &= LocalMsg
                End If
                ReadDoorCompleted = True
+            Case ConstCompo.K_HARDWARE
+               LineIndex = LineIndex + 1
+            Case ConstCompo.K_OPTIONS
+               LineIndex = ReadDoor.GetOptions(ReadDoor.NextIndex(LineIndex))
             Case Else 'COMPONENTS
                ' Se sezione senza nome o altro errore              
                If String.IsNullOrWhiteSpace(sSection) Then
@@ -1800,6 +1834,24 @@ Public Class Part
       Return SkipWhiteSpace(FileContent, Index + 1)
    End Function
 
+   ' Leggo versione
+   Private Function GetVersion(Index As Integer) As Integer
+      Dim sVersion As String = GetValueWithKey(RemoveComment(FileContent(Index)), S_VERSION)
+      If String.IsNullOrWhiteSpace(sVersion) Then
+         m_Version = "1"
+      Else
+         ' verifico che sia valido (dove leggo l'elenco delle versioni disponibili?)
+         If sVersion.Trim <> "2" Then
+            m_Version = "1"
+         Else
+            m_Version = sVersion.Trim
+         End If
+      End If
+      RegexFunction.sCurrVersionDoor = m_Version
+      ' passo alla riga successiva
+      Return NextIndex(Index)
+   End Function
+
    ' Leggo il frame
    Private Function GetProduce(Index As Integer) As Integer
       Dim sProduce As String = GetValueWithKey(RemoveComment(FileContent(Index)), S_PRODUCE)
@@ -1940,6 +1992,7 @@ Public Class Part
          '50159= Missing parameter in ddf!
          MessageBox.Show(String.Format(EgtMsg(50141), ConstIni.K_WIDTH_INI) & EgtMsg(50159), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, Width)
          SetWidth(Width)
       End If
       Index = NextIndex(Index)
@@ -1956,6 +2009,7 @@ Public Class Part
          ' 50159 =  Missing parameter in ddf!
          MessageBox.Show(String.Format(EgtMsg(50141), ConstIni.K_HEIGHT_INI) & EgtMsg(50159), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, Height)
          SetHeight(Height)
       End If
       Index = NextIndex(Index)
@@ -1972,6 +2026,7 @@ Public Class Part
          ' 50159 =  Missing parameter in ddf!
          MessageBox.Show(String.Format(EgtMsg(50141), ConstIni.K_THICKNESS_INI) & EgtMsg(50159), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, Thickness)
          SetThickness(Thickness)
       End If
       Map.refAssemblyPageVM.CurrAssembly.SetVarAssembly()
@@ -2167,6 +2222,28 @@ Public Class Part
       Return NextIndex(Index)
    End Function
 
+   Private Function GetOptions(Index As Integer) As Integer
+      If Index > FileContent.Count() - 1 Then Return Index
+      Dim sLine As String = RemoveComment(FileContent(Index))
+      ' se stringa vuota passo alla riga successiva
+      If String.IsNullOrEmpty(sLine) Then
+         Return Index
+      End If
+      ' procedo a leggere le options
+      Dim nCount As Integer = 0
+      m_sOptions = String.Empty
+      ' sLine.StartsWith(OptionModule.m_sSpace1Tab)
+      While Not (Search3Hyphens(sLine) OrElse Search3Dots(sLine))
+         m_sOptions &= If(nCount > 0, vbCrLf, "") & sLine
+         Index = NextIndex(Index)
+         ' se il file è terminatpo esco
+         If Index > FileContent.Count() - 1 Then Return Index
+         sLine = RemoveComment(FileContent(Index))
+         nCount = nCount + 1
+      End While
+      Return Index
+   End Function
+
    ' calcola la congruenza del posizionamento e del secure
    Private Sub CalcBevelFromSecure()
       ' se sono nella configurazione assemblato e sto leggendo un frame 
@@ -2290,19 +2367,18 @@ Public Class Part
          refOptionsVM.RefreshEdgeTypeList()
       End If
       Dim bError As Boolean = False
+      '-------------------------------------------------------------------------------
       ' Lock
       If Index > FileContent.Count() - 1 Then Return -1
       Dim sLine As String = RemoveComment(FileContent(Index))
       m_LockEdgeType = m_LockEdgeTypeList(0)
-      Dim LockEdgeType As String = GetValueWithKey(sLine, K_LOCKEDGE)
+      ' se vrsione 2 (20/04/2023) il tipo di bevel è inserito nella riga successiva con chaive K_TYPEEDGE
+      Dim nError As Integer = Index
+      Dim LockEdgeType As String = ManageProfileType(sLine, Index, nError, K_LOCKEDGE)
+      If nError = -1 Then Return -1
       If String.IsNullOrWhiteSpace(LockEdgeType) Then
          ' se non c'è la parola chiave allora esco con errore
-         If Not SearchKey(sLine, K_LOCKEDGE) Then
-            Return -1
-         Else
-            FirstReadingEdge = True
-            sErrorMsg = String.Format(EgtMsg(50523), SIDE_LOCK)
-         End If
+         If ManageProfileError(sLine, K_LOCKEDGE, SIDE_LOCK) = -1 Then Return -1
       Else
          Try
             Dim sMetaData As String = Trim(RegexFunction.Metadata(sLine))
@@ -2332,7 +2408,6 @@ Public Class Part
                End Try
             End If
          End Try
-
          If Not ControlProfileInList(LockEdgeTypeList, LockEdgeType) Then
             ' 50522=The profile {0} is not a member of the {1} list.
             sErrorMsg = String.Format(EgtMsg(50522), LockEdgeType, SIDE_LOCK)
@@ -2355,6 +2430,7 @@ Public Class Part
       If String.IsNullOrWhiteSpace(LockEdgeOverMaterial) Then
          If Not SearchKey(sLine, K_OVERMATERIAL) Then Return -1
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, LockEdgeOverMaterial)
          m_LockEdgeOverMaterial = LockEdgeOverMaterial
       End If
       Index = NextIndex(Index)
@@ -2363,15 +2439,13 @@ Public Class Part
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       m_HingeEdgeType = m_HingeEdgeTypeList(0)
-      Dim HingeEdgeType As String = GetValueWithKey(sLine, K_HINGEEDGE)
+      ' se vrsione 2 (20/04/2023) il tipo di bevel è inserito nella riga successiva con chaive K_TYPEEDGE
+      nError = Index
+      Dim HingeEdgeType As String = ManageProfileType(sLine, Index, nError, K_HINGEEDGE)
+      If nError = -1 Then Return -1
       If String.IsNullOrWhiteSpace(HingeEdgeType) Then
          ' se non c'è la parola chiave allora esco con errore
-         If Not SearchKey(sLine, K_HINGEEDGE) Then
-            Return -1
-         Else
-            FirstReadingEdge = True
-            sErrorMsg = String.Format(EgtMsg(50523), SIDE_HINGE)
-         End If
+         If ManageProfileError(sLine, K_HINGEEDGE, SIDE_HINGE) = -1 Then Return -1
       Else
          Try
             m_HingeEdgeType = HingeEdgeTypeList.First(Function(x) x.Name = HingeEdgeType)
@@ -2417,21 +2491,21 @@ Public Class Part
       If String.IsNullOrWhiteSpace(HingeEdgeOverMaterial) Then
          If Not SearchKey(sLine, K_OVERMATERIAL) Then Return -1
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, HingeEdgeOverMaterial)
          m_HingeEdgeOverMaterial = HingeEdgeOverMaterial
       End If
       Index = NextIndex(Index)
+      '-------------------------------------------------------------------------------
       ' Top
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       m_TopType = m_TopEdgeTypeList(0)
-      Dim TopType As String = GetValueWithKey(sLine, K_TOP)
+      ' se vrsione 2 (20/04/2023) il tipo di bevel è inserito nella riga successiva con chaive K_TYPEEDGE
+      nError = Index
+      Dim TopType As String = ManageProfileType(sLine, Index, nError, K_TOP)
+      If nError = -1 Then Return -1
       If String.IsNullOrWhiteSpace(TopType) Then
-         If Not SearchKey(sLine, K_TOP) Then
-            Return -1
-         Else
-            FirstReadingEdge = True
-            sErrorMsg = String.Format(EgtMsg(50523), SIDE_TOP)
-         End If
+         If ManageProfileError(sLine, K_TOP, SIDE_TOP) = -1 Then Return -1
       Else
          Try
             m_TopType = TopEdgeTypeList.First(Function(x) x.Name = TopType)
@@ -2476,12 +2550,14 @@ Public Class Part
       If String.IsNullOrWhiteSpace(TopOverMaterial) Then
          If Not SearchKey(sLine, K_OVERMATERIAL) Then Return -1
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, TopOverMaterial)
          m_TopOverMaterial = TopOverMaterial
       End If
       Index = NextIndex(Index)
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       '-------------------------------------------------------------------------------
+      ' Top Arc
       Dim Radius As String = GetValueWithKey(sLine, ConstCompo.K_RADIUS)
       If Not String.IsNullOrEmpty(Radius) Then
          Index = NextIndex(Index)
@@ -2495,7 +2571,9 @@ Public Class Part
                Index = NextIndex(Index)
             Else
                Index = NextIndex(Index)
+               ConvertDDFValueIntoCurrentUnit(m_Measure, Radius)
                m_Radius = Radius
+               ConvertDDFValueIntoCurrentUnit(m_Measure, Posx)
                m_Posx = Posx
                TopArcIsChecked = True
                TopShapeIsChecked = True
@@ -2519,6 +2597,7 @@ Public Class Part
                Else
                   Index = NextIndex(Index)
                   m_Angle = Angle
+                  ConvertDDFValueIntoCurrentUnit(m_Measure, PosxAngle)
                   m_PosxAngle = PosxAngle
                   TopAngleIsChecked = True
                   SelectedShape = m_TopShapeList(1)
@@ -2532,14 +2611,12 @@ Public Class Part
       If Index > FileContent.Count() - 1 Then Return -1
       sLine = RemoveComment(FileContent(Index))
       m_BottomType = m_BottomEdgeTypeList(0)
-      Dim BottomType As String = GetValueWithKey(sLine, K_BOTTOM)
+      ' se vrsione 2 (20/04/2023) il tipo di bevel è inserito nella riga successiva con chaive K_TYPEEDGE
+      nError = Index
+      Dim BottomType As String = ManageProfileType(sLine, Index, nError, K_BOTTOM)
+      If nError = -1 Then Return -1
       If String.IsNullOrWhiteSpace(BottomType) Then
-         If Not SearchKey(sLine, K_BOTTOM) Then
-            Return -1
-         Else
-            FirstReadingEdge = True
-            sErrorMsg = String.Format(EgtMsg(50523), SIDE_BOTTOM)
-         End If
+         If ManageProfileError(sLine, K_BOTTOM, SIDE_BOTTOM) = -1 Then Return -1
       Else
          Try
             m_BottomType = BottomEdgeTypeList.First(Function(x) x.Name = BottomType)
@@ -2584,12 +2661,52 @@ Public Class Part
       If String.IsNullOrWhiteSpace(BottomOverMaterial) Then
          If Not SearchKey(sLine, K_OVERMATERIAL) Then Return -1
       Else
+         ConvertDDFValueIntoCurrentUnit(m_Measure, BottomOverMaterial)
          m_BottomOverMaterial = BottomOverMaterial
       End If
       CalcBevelFromSecure()
       Return NextIndex(Index)
    End Function
 
+   Private Function ManageProfileType(ByRef sLine As String, ByRef Index As Integer, ByRef nError As Integer, sEdgeName As String) As String
+      Dim sVal As String = String.Empty
+      If m_Version = "2" Then
+         If SearchKey(sLine, sEdgeName) Then
+            ' passo alla riga successiva
+            Index = NextIndex(Index)
+            If Index > FileContent.Count() - 1 Then Return -1
+            sLine = RemoveComment(FileContent(Index))
+            sVal = GetValueWithKey(sLine, K_TYPEEDGE)
+         Else
+            nError = -1
+            Return sVal
+         End If
+      Else
+         sVal = GetValueWithKey(sLine, sEdgeName)
+      End If
+      Return sVal
+   End Function
+
+   Private Function ManageProfileError(sLine As String, sEdgeName As String, sMsgName As String) As Integer
+      Dim nError As Integer = 0
+      If m_Version = "2" Then
+         If Not SearchKey(sLine, K_TYPEEDGE) Then
+            Return -1
+         Else
+            FirstReadingEdge = True
+            sErrorMsg = String.Format(EgtMsg(50523), sMsgName)
+         End If
+      Else
+         If Not SearchKey(sLine, sEdgeName) Then
+            Return -1
+         Else
+            FirstReadingEdge = True
+            sErrorMsg = String.Format(EgtMsg(50523), sMsgName)
+         End If
+      End If
+      Return nError
+   End Function
+
    ' Leggo i dati del componente ( da senllire riutilizzando funzioni che già esistono)
    Private Function GetCompo(Index As Integer, CompoNameDDF As String, ByRef sErrorInfo As String) As Integer
       ' Controllo esistenza del componente
@@ -2849,7 +2966,7 @@ Public Class Part
          While IndexLine < FileContent.Count - 1 AndAlso
                Not (Search3Hyphens(RemoveComment(FileContent(IndexLine))) OrElse Search3Dots(RemoveComment(FileContent(IndexLine)))) AndAlso
                Not Trim(RemoveComment(FileContent(IndexLine))).StartsWith("- ") AndAlso
-               RemoveComment(FileContent(IndexLine)).StartsWith(ConstCompo.DDF_SPACE3)
+               (RemoveComment(FileContent(IndexLine)).StartsWith(ConstCompo.DDF_SPACE3) Or RemoveComment(FileContent(IndexLine)).StartsWith(ConstCompo.DDF_SPACE2))
             ' salvo i commenti 
             If String.IsNullOrWhiteSpace(FileContent(IndexLine)) Then
                IndexLine += 1
@@ -2955,7 +3072,13 @@ Public Class Part
                         Dim sVal As String = GetValueWithoutKey(sLine)
                         ' per ora non esegue nessun tipo di controllo sui valori letti dal file DDF
                         ' DirectCast(CurrCompoParam, TextBoxParam).m_Value = sVal
-                        DirectCast(CurrCompoParam, TextBoxParam).Value = sVal
+                        Dim Local_TextBoxParam As TextBoxParam = DirectCast(CurrCompoParam, TextBoxParam)
+                        If Local_TextBoxParam.bIsLen Then
+                           ConvertDDFValueIntoCurrentUnit(m_Measure, sVal)
+                           Local_TextBoxParam.Value = sVal
+                        Else
+                           Local_TextBoxParam.Value = sVal
+                        End If
                         ' avviso che il file è modificato  (in caso di chiusura del programma obbligo a passare dal salvataggio)
                         Dim dVal As Double
                         If String.IsNullOrEmpty(sVal) OrElse Not StringToDouble(sVal, dVal) Then
@@ -3002,7 +3125,13 @@ Public Class Part
                   If String.Equals(Trim(CompoTemplateItem.CompoParamList(IndexParam).DDFName), GetKey(sLine)) Then
                      ' se la  stringa c'è nel DDF vuol dire che è stata selezionata
                      Dim sVal As String = GetValueWithKey(sLine, Trim(CurrCompoParam.DDFName))
-                     DirectCast(CurrCompoParam, TextBoxOnOffParam).m_Value = sVal
+                     Dim Local_TextBoxOnOffParam As TextBoxOnOffParam = DirectCast(CurrCompoParam, TextBoxOnOffParam)
+                     If Local_TextBoxOnOffParam.bIsLen Then
+                        ConvertDDFValueIntoCurrentUnit(m_Measure, sVal)
+                        Local_TextBoxOnOffParam.m_Value = sVal
+                     Else
+                        Local_TextBoxOnOffParam.m_Value = sVal
+                     End If
                      'DirectCast(CurrCompoParam, TextBoxOnOffParam).Value = sVal
                      Dim dVal As Double
                      If String.IsNullOrEmpty(sVal) OrElse Not StringToDouble(sVal, dVal) Then
@@ -3059,6 +3188,7 @@ Public Class Part
                      ' assegno al parametro della compnente il valore "filtrato"
                      DirectCast(CurrCompoParam, ComboBoxOnOffParam).SetSelItem(SelItem)
                      'DirectCast(CurrCompoParam, ComboBoxOnOffParam).SelItem = SelItem 
+                     DirectCast(CurrCompoParam, ComboBoxOnOffParam).SetIsActive(True)
                      ' se il nome esiste ma è sbagliato
                   ElseIf Not String.IsNullOrWhiteSpace(GetKey(sLine)) Then
                      ' significa che la TextBoxOnOff è stata disattivata
@@ -3118,8 +3248,8 @@ Public Class Part
          Return False
       End If
       ' per riconoscere una componente: no spazi ad inizio riga, dopo i ":" riga vuota
-      If FileContent(IndexLine) = FileContent(IndexLine).Trim AndAlso
-         GetValueWithoutKey(FileContent(IndexLine)) = String.Empty Then
+      If FileContent(IndexLine).StartsWith(OptionModule.m_sSpaceTabCompo) AndAlso
+            GetValueWithoutKey(FileContent(IndexLine)) = String.Empty Then
          m_StopNextIndexLine = True
          Return True
       End If

DoorParameters/PartPageV.xaml

@@ -12,16 +12,16 @@
       <EgtDOORCreator:TrueToFalse x:Key="TrueToFalse"/>
    </UserControl.Resources>
 
-    <Grid IsEnabled="{Binding EnablePageDoor}">
+    <Grid Name="MainGrid" IsEnabled="{Binding EnablePageDoor}">
       <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="1*"/>
-         <ColumnDefinition Width="5*"/>
+         <ColumnDefinition Width="{Binding WidthColumn1}"/>
+         <ColumnDefinition Width="{Binding WidthColumn2}"/>
       </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="1*"/>
       </Grid.RowDefinitions>
 
-      <Grid Margin="0,0,0,0.2" Grid.Column="1" IsEnabled="{Binding IsReadOnly}">
+      <Grid Margin="0,0,0,0.2" Grid.Column="{Binding GridGeneralDiposition}" IsEnabled="{Binding IsReadOnly}">
          <Grid.InputBindings>
             <KeyBinding Key="Enter" Command="{Binding DataContext.RefreshCmd,RelativeSource={RelativeSource AncestorType={x:Type UserControl}}}"/>
             <KeyBinding Key="F1" Command="{Binding DataContext.GuideCmd,RelativeSource={RelativeSource AncestorType={x:Type UserControl}}}"/>
@@ -893,7 +893,7 @@
          </ListBox>
 
       </Grid>
-      <ContentControl Grid.Column="0" Grid.Row="0" Content="{Binding CompoPanelControl}"/>
+      <ContentControl Name="MainContentConrol" Grid.Column="{Binding CompoPanelDiposition}" Grid.Row="0" Content="{Binding CompoPanelControl}"/>
       <!--<EgtDOORCreator:CompoPanelV Grid.Column="0" DataContext="{Binding CompoPanelPartVM}"/>-->
    </Grid>
 </UserControl>

DoorParameters/PartPageV.xaml.vb

@@ -1,8 +1,8 @@
 Public Class PartPageV
 
    Public Sub ItemsControl_SelectionChanged(sender As Object, e As SelectionChangedEventArgs)
-   Dim ListControl As ListBox=DirectCast(sender,listbox)
-            If Not IsNothing( ListControl.SelectedItem) Then
+      Dim ListControl As ListBox = DirectCast(sender, ListBox)
+      If Not IsNothing(ListControl.SelectedItem) Then
          Dim SelectedItemIndex As Integer = ListControl.Items.IndexOf(ListControl.SelectedItem)
          If SelectedItemIndex < 0 Then Return
          ListControl.Dispatcher.BeginInvoke(DirectCast(Sub()
@@ -30,4 +30,5 @@
    Private Sub UserControl_IsEnabledChanged(sender As Object, e As DependencyPropertyChangedEventArgs)
 
    End Sub
+
 End Class

DoorParameters/PartPageVM.vb

@@ -73,6 +73,50 @@ Public Class PartPageVM
       End Get
    End Property
 
+#Region "DISPOSITION SCREEN"
+
+   Public ReadOnly Property WidthColumn1 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "1*"
+         Else
+            Return "5*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property WidthColumn2 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "5*"
+         Else
+            Return "1*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property GridGeneralDiposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "1"
+         Else
+            Return "0"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property CompoPanelDiposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "0"
+         Else
+            Return "1"
+         End If
+      End Get
+   End Property
+
+#End Region   ' Disposition Screen
+
 #Region "CONSTUCTOR"
 
    Sub New()

EgtDOORCreator.vbproj

@@ -619,8 +619,8 @@
   <ItemGroup />
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
-    <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\EgtDOORCreator\EgtDOORCreatorR32.exe
-IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Debug" copy $(TargetPath) c:\EgtProg\EgtDOORCreator\EgtDOORCreatorD32.exe
+    <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) C:\EgtProg\EgtDOORCreator\EgtDOORCreatorR32.exe
+IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Debug" copy $(TargetPath) C:\EgtProg\EgtDOORCreator\EgtDOORCreatorD32.exe
 </PostBuildEvent>
   </PropertyGroup>
 </Project>

HardwareManager/Hardware.vb

@@ -739,14 +739,15 @@ Public Class Hardware
          Dim nIsActiveMaterial As Integer = 3
          Dim bIsCurrentMaterial As Boolean = True
          StdTemplateGetPrivateProfileListMaterial(S_CHAPTER & ChapterIndex, K_MATERIAL, sMaterialList, nIsActiveMaterial)
-         For Each ItemMaterial In sMaterialList
-            bIsCurrentMaterial = False
-            Dim ArrayItemMaterial As String() = ItemMaterial.Split("/"c)
-            If Trim(ArrayItemMaterial(0)) = Trim(Map.refHardwarePageVM.GenericPart.SelectedMaterial.NameDDF) Then
-               bIsCurrentMaterial = True
-               Exit For
-            End If
-         Next
+         'For Each ItemMaterial In sMaterialList
+         '   bIsCurrentMaterial = False
+         '   Dim ArrayItemMaterial As String() = ItemMaterial.Split("/"c)
+         '   If Trim(ArrayItemMaterial(0)) = Trim(Map.refHardwarePageVM.GenericPart.SelectedMaterial.NameDDF) Then
+         '      bIsCurrentMaterial = True
+         '      Exit For
+         '   End If
+         'Next
+         IsCurrentMaterial(sMaterialList, bIsCurrentMaterial)
 
          If Not bIsCurrentMaterial And nIsActive <> 4 Then
             nIsActive = nIsActiveMaterial
@@ -793,6 +794,18 @@ Public Class Hardware
                Dim NewParam As New CompoParam(m_HardwareGeneral.DDFName, m_HardwareGeneral.Name, Chapter)
                Dim sHelpParam As String = String.Empty
                EgtUILib.GetPrivateProfileString(S_CHAPTER & ChapterIndex, "HelpParam" & ParamIndex, "", sHelpParam, m_StdTemplate)
+               ' verifico se il materiale corrente deve essere visualizzato in funzione del materiale associato al parametro
+               Dim sMaterialParam As String = String.Empty
+               Dim MaterialParamList As New List(Of String)
+               Dim bIsCurrentMaterialParam As Boolean = True
+               Dim sDefaultGhostValue As String = ""
+               StdTemplateGetPrivateProfileListMaterialParam(S_CHAPTER & ChapterIndex, "MaterialParam" & ParamIndex, MaterialParamList, sDefaultGhostValue)
+               IsCurrentMaterial(MaterialParamList, bIsCurrentMaterialParam)
+               If Not bIsCurrentMaterialParam Then
+                  ' trasformo il parametro in Ghost
+                  TrasformCurrParamInGhost(sParam, sDefaultGhostValue)
+               End If
+
                ' leggo il tipo di parametro, se la lettura va a buon fine la carico
                If Chapter.ReadParamHardware(sParam, sHelpParam, NewParam, ErrorReading) Then Chapter.CompoParamList.Add(NewParam)
                If TypeOf NewParam Is TextBoxOnOffParam Then
@@ -834,6 +847,29 @@ Public Class Hardware
       End If
    End Sub
 
+   ' recupera il l'elenco dei materiali indicati nella stringa e verifica se nell'elenco è presente il materiale attivo nella porta
+   Private Sub IsCurrentMaterial(sMaterialList As List(Of String), ByRef bIsCurrentMaterial As Boolean)
+      For Each ItemMaterial In sMaterialList
+         bIsCurrentMaterial = False
+         Dim ArrayItemMaterial As String() = ItemMaterial.Split("/"c)
+         If Trim(ArrayItemMaterial(0)) = Trim(Map.refHardwarePageVM.GenericPart.SelectedMaterial.NameDDF) Then
+            bIsCurrentMaterial = True
+            Exit For
+         End If
+      Next
+   End Sub
+
+   Private Sub TrasformCurrParamInGhost(ByRef sParamLine As String, ByVal sDefaultValue As String)
+      ' separo la stringa
+      Dim sItems As String() = sParamLine.Split(";"c)
+      If sItems.Count > 2 Then
+         sItems(0) = "Ghost"
+         sItems(2) = sDefaultValue
+      End If
+      ' riassemblo la stringa iniziale
+      sParamLine = Trim(sItems(0)) & "; " & Trim(sItems(1)) & "; " & Trim(sItems(2))
+   End Sub
+
    ' carico la liste dei nomi dei capitoli
    Private Function SetGroupChaptername(sName As String) As Boolean
       If m_GroupChapterName.Count = 0 Then m_GroupChapterName.Add(sName)

HardwareManager/HardwarePageV.xaml

@@ -15,8 +15,8 @@
    <Grid IsEnabled="{Binding EnablePageHardware}">
       <Grid.ColumnDefinitions>
          <!-- Colonna dedicata alla lista dei bottoni -->
-         <ColumnDefinition Width="1*"/>
-         <ColumnDefinition Width="5*"/>
+         <ColumnDefinition Width="{Binding WidthColumn1}"/>
+         <ColumnDefinition Width="{Binding WidthColumn2}"/>
       </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="2*"/>
@@ -26,8 +26,9 @@
          <KeyBinding Key="Enter" Command="{Binding DataContext.RefreshCmd,RelativeSource={RelativeSource AncestorType={x:Type UserControl}}}"/>
          <KeyBinding Key="F1" Command="{Binding DataContext.GuideCmd,RelativeSource={RelativeSource AncestorType={x:Type UserControl}}}"/>
       </Grid.InputBindings>
+       
       <!-- La griglia che gestirà i parametri hardaware -->
-      <Grid Grid.Column="1">
+      <Grid Grid.Column="{Binding GridGeneralDiposition}" Grid.Row="0">
          <Grid.RowDefinitions>
          <!-- Deicata al general dell'hardware-->
          <RowDefinition Height="Auto"/>
@@ -858,9 +859,9 @@
       </Grid>
       
       <!-- Elenco pulsanti Hardware -->
-      <ContentControl Grid.Column="0" Grid.RowSpan="2" Grid.Row="0" Content="{Binding CompoPanelControl}"/>
+      <ContentControl Grid.Column="{Binding CompoPanelDiposition}" Grid.RowSpan="2" Grid.Row="0" Content="{Binding CompoPanelControl}"/>
 
-      <EgtDOORCreator:HardwareHelpSceneHostV Grid.Column="1" Grid.Row="1" Margin="0,0,2,0"/>
+      <EgtDOORCreator:HardwareHelpSceneHostV Grid.Column="{Binding GridGeneralDiposition}" Grid.Row="1" Margin="0,0,2,0" />
       
    </Grid>
    

HardwareManager/HardwarePageVM.vb

@@ -93,6 +93,50 @@ Public Class HardwarePageVM
       End Get
    End Property
 
+#Region "DISPOSITION SCREEN"
+
+   Public ReadOnly Property WidthColumn1 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "1*"
+         Else
+            Return "5*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property WidthColumn2 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "5*"
+         Else
+            Return "1*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property GridGeneralDiposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "1"
+         Else
+            Return "0"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property CompoPanelDiposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 0 Or OptionModule.m_nDispostionScreen = 1 Then
+            Return "0"
+         Else
+            Return "1"
+         End If
+      End Get
+   End Property
+
+#End Region   ' Disposition Screen
+
 #Region "MESSAGES"
 
    Public ReadOnly Property GeneralMsg As String

IniFile.vb

@@ -59,6 +59,8 @@ Friend Module IniFile
    Friend m_sListLabelCurrent As String = String.Empty
    ' Path dell'eseguibile Cam5
    Friend m_sEgtCameEXEPath As String = String.Empty
+   ' Path LuaLibs Dir
+   Friend m_sLuaLibsDir As String = String.Empty
 
    ' EgtDoorCreator.ini
    Public Function GetPrivateProfileLanguage(ByVal lpAppName As String, ByVal lpKeyName As String) As Language
@@ -289,6 +291,27 @@ Friend Module IniFile
       Return True
    End Function
 
+   ' restituisce l'elenco dei materiali ed eventualmente il valore di default da associare al parametro Ghost che viene generato in sostituzione del parametro letto
+   Public Function StdTemplateGetPrivateProfileListMaterialParam(ByVal lpAppName As String, ByVal lpKeyName As String, ByVal List As List(Of String), ByRef sDefaultParam As String) As Boolean
+      Dim sVal As String = String.Empty
+      StdTemplateGetPrivateProfileString(lpAppName, lpKeyName, "", sVal)
+      If String.IsNullOrEmpty(sVal) Then Return False
+      Dim sItems() As String = sVal.Split(",".ToCharArray)
+      ' se la lista ha almeno due elementi
+      If sItems.Count > 1 Then
+         For Index = 0 To sItems.Count() - 2
+            List.Add(Trim(sItems(Index)))
+         Next
+      End If
+      ' se la lista ha un solo elemento, oppure ha un solo elemento
+      Dim LastItems As String() = sItems.Last.Split(";"c)
+      List.Add(Trim(LastItems(0)))
+      If LastItems.Count > 1 Then
+         sDefaultParam = Trim(LastItems(1))
+      End If
+      Return True
+   End Function
+
    Public Function StdTemplateGetPrivateProfileChapterName(ByVal lpAppName As String, ByVal lpKeyName As String, ByRef sValueLua As String, ByRef sValue As String) As Boolean
       Dim sVal As String = String.Empty
       StdTemplateGetPrivateProfileString(lpAppName, lpKeyName, "", sVal)
@@ -341,6 +364,23 @@ Friend Module IniFile
       Return False
    End Function
 
+   Public Function GetPrivateProfileCompoImage(IpAppName As String, IpKeyName As String, ByRef Image As String, CompoIniPath As String) As Boolean
+      Dim sVal As String = String.Empty
+      EgtUILib.GetPrivateProfileString(IpAppName, IpKeyName, "", sVal, CompoIniPath)
+      Dim CurrDir As String = Path.GetDirectoryName(CompoIniPath)
+      sVal = sVal.Trim
+      If Not String.IsNullOrEmpty(sVal) AndAlso Not String.IsNullOrEmpty(CurrDir) Then
+         sVal = CurrDir.Trim & "\" & sVal
+         If File.Exists(sVal) Then
+            Image = sVal
+            Return True
+         Else
+            Return False
+         End If
+      End If
+      Return False
+   End Function
+
    Public Function GetPrivateProfileFolderName(IpAppName As String, IpKeyName As String, ByRef Name As String, CompoIniPath As String) As Boolean
       Dim sVal As String = String.Empty
       EgtUILib.GetPrivateProfileString(IpAppName, IpKeyName, "", sVal, CompoIniPath)

MainWindow/MainWindowModel.vb

@@ -57,8 +57,8 @@ Friend Class MainWindowModel
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_KEY, "", sKey, sLicFile)
       EgtSetKey(sKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2412, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2412, 1, IniFile.m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2541, 1, IniFile.m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2541, 1, IniFile.m_nKeyOptions)
       'Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       Dim sLogFile As String = IniFile.m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())
@@ -96,6 +96,7 @@ Friend Class MainWindowModel
       Dim sLuaLibsDir As String = String.Empty
       GetMainPrivateProfileString(S_LUA, K_LIBSDIR, "", sLuaLibsDir)
       EgtSetLuaLibs(sLuaLibsDir)
+      IniFile.m_sLuaLibsDir = sLuaLibsDir
       Dim sLuaBaseLib As String = String.Empty
       GetMainPrivateProfileString(S_LUA, K_BASELIB, "EgtBase", sLuaBaseLib)
       EgtLuaRequire(sLuaBaseLib)

MainWindow/MainWindowV.xaml

@@ -23,8 +23,8 @@
    <Grid>
       <Grid.ColumnDefinitions>
          <!--<ColumnDefinition Width="1*"/>-->
-         <ColumnDefinition Width="6*"/>
-         <ColumnDefinition Width="5*"/>
+         <ColumnDefinition Width="{Binding WidthColumn1}"/>
+         <ColumnDefinition Width="{Binding WidthColumn2}"/>
       </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="Auto" />
@@ -32,10 +32,11 @@
       </Grid.RowDefinitions>
 
       <!--<EgtDOORCreator:AssemblyManagerV Grid.Column="0" DataContext="{StaticResource AssemblyManagerVM}"/>-->
-      <ContentControl Grid.Column="0" Grid.Row="0" Content="{Binding AssemblyManagerControl}"/>
-      <ContentControl Grid.Column="0" Grid.Row="1" Content="{Binding PageControl}"/>
-      <EgtDOORCreator:SceneManagerV Grid.Column="1" Grid.RowSpan="2" DataContext="{StaticResource SceneManagerVM}"/>
-      
+      <ContentControl Grid.Column="{Binding AssemblyManagerDisposition}" Grid.Row="0" Content="{Binding AssemblyManagerControl}"/>
+      <ContentControl Grid.Column="{Binding PageControlDisposition}" Grid.Row="1" Content="{Binding PageControl}"/>
+      <!--<EgtDOORCreator:SceneManagerV Grid.Column="{Binding SceneManagerDiposition}" Grid.RowSpan="2" DataContext="{StaticResource SceneManagerVM}"/>-->
+      <!--<EgtDOORCreator:SceneManagerV Grid.Column="0" Grid.RowSpan="2" DataContext="{StaticResource SceneManagerVM}"/>-->
+      <ContentControl Grid.Column="{Binding SceneManagerDiposition}" Grid.RowSpan="2" Content="{Binding SceneManagerControl}"/>
    </Grid>
    
 </EgtWPFLib5:EgtCustomWindow>

MainWindow/MainWindowVM.vb

@@ -77,6 +77,7 @@ Public Class MainWindowVM
    Private m_PartPage As PartPageV
    Private m_AssemblyPage As AssemblyPageV
    Private m_HardwarePage As HardwarePageV
+   Private m_SceneManager As SceneManagerV
 
    Private Watcher As FileSystemWatcher = New FileSystemWatcher(IniFile.m_CompoDir, "*" & LUA_EXTENSION)
 
@@ -128,6 +129,12 @@ Public Class MainWindowVM
       End Get
    End Property
 
+   Public ReadOnly Property SceneManagerControl As ContentControl
+      Get
+         Return m_SceneManager
+      End Get
+   End Property
+
    Public ReadOnly Property ProjectManagerControl As ContentControl
       Get
          If m_SelectedPage <> ListPageEnum.nHardwarePage then
@@ -159,10 +166,67 @@ Public Class MainWindowVM
       m_HardwarePage.DataContext = New HardwarePageVM
       m_AssemblyManager = New AssemblyManagerV
       m_AssemblyManager.DataContext = New AssemblyManagerVM
+      ' inserisco la scena
+      m_SceneManager = New SceneManagerV
+      m_SceneManager.DataContext = New SceneManagerVM
       Dim OptionsPage As OptionsVM = OptionPage
       InitWatcher()
    End Sub
 
+#Region "DISPOSITION SCREEN"
+
+   Public ReadOnly Property WidthColumn1 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 1 Or OptionModule.m_nDispostionScreen = 2 Then
+            Return "5*"
+         Else
+            Return "6*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property WidthColumn2 As String
+      Get
+         If OptionModule.m_nDispostionScreen = 1 Or OptionModule.m_nDispostionScreen = 2 Then
+            Return "6*"
+         Else
+            Return "5*"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property AssemblyManagerDisposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 1 Or OptionModule.m_nDispostionScreen = 2 Then
+            Return "1"
+         Else
+            Return "0"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property PageControlDisposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 1 Or OptionModule.m_nDispostionScreen = 2 Then
+            Return "1"
+         Else
+            Return "0"
+         End If
+      End Get
+   End Property
+
+   Public ReadOnly Property SceneManagerDiposition As String
+      Get
+         If OptionModule.m_nDispostionScreen = 1 Or OptionModule.m_nDispostionScreen = 2 Then
+            Return "0"
+         Else
+            Return "1"
+         End If
+      End Get
+   End Property
+
+#End Region   ' Disposition Screen
+
 #Region "Methods"
 
    Public Sub ShowErrorCompoLoad()

My Project/AssemblyInfo.vb

@@ -23,16 +23,16 @@ Imports System.Windows
 #Else
 #If DEBUG Then
 <Assembly: AssemblyTitle("EgtDOORCreator Debug 32 bit")> 
-<Assembly: AssemblyDescription("EgtDOORCreatorD32.exe")> 
+<Assembly: AssemblyDescription("EgtDOORCreatorD32.exe")>
 #Else
 <Assembly: AssemblyTitle("EgtDOORCreator Release 32 bit")> 
 <Assembly: AssemblyDescription("EgtDOORCreatorR32.exe")> 
 #End If
 #End If
 
-<Assembly: AssemblyCompany("EgalTech s.r.l.")> 
+<Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtDOORCreator")>
-<Assembly: AssemblyCopyright("Copyright ©  2016-2022 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2016-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 
@@ -72,5 +72,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.12.1")>
-<Assembly: AssemblyFileVersion("2.4.12.1")>
+<Assembly: AssemblyVersion("2.5.4.1")>
+<Assembly: AssemblyFileVersion("2.5.4.1")>

OptionsWindow/OptionModule.vb

@@ -30,6 +30,14 @@ Friend Module OptionModule
    Friend m_bBevelUp As Visibility
    Friend m_bBevelDown As Visibility
 
+   ' Parametri per la scelta della versione di stampa ddf
+   Friend m_sVersionDDF As String = "2"
+   Friend m_sSpaceTabCompo As String = ""
+   Friend m_sSpace1Tab As String = ConstCompo.DDF_SPACE3
+   Friend m_sSpace2Tab As String = ConstCompo.DDF_SPACE5
+   Friend m_sSpace3Tab As String = ConstCompo.DDF_SPACE5
+   Friend m_sSpaceHype As String = ConstCompo.DDF_HYPHEN
+
    Friend m_DisableInvertBevel As Visibility = Visibility.Collapsed
 
    Friend m_DisableAddGeometry As Visibility = Visibility.Collapsed
@@ -50,6 +58,8 @@ Friend Module OptionModule
 
    Friend m_EnableBrowse As Boolean = False
 
+   Friend m_nDispostionScreen As Integer = 0
+
    Friend Enum LauncherOpt As Integer
       Open_window = 0
       Open_last_project = 1
@@ -232,11 +242,33 @@ Friend Module OptionModule
          OptionModule.ReadOnlyDDF = False
       End If
 
+      ' valore indentazione programma
+      Dim sVer As String = String.Empty
+      If GetMainPrivateProfileString(S_GENERAL, K_DDFVERSION, "1", sVer) > 0 Then
+         Dim sItem() As String = sVer.Split(";"c)
+         m_sVersionDDF = sItem(0).Trim
+      End If
+      If m_sVersionDDF = "2" Then
+         m_sSpaceTabCompo = ConstCompo.DDF_SPACE2
+         m_sSpace1Tab = ConstCompo.DDF_SPACE2
+         m_sSpace2Tab = ConstCompo.DDF_SPACE4
+         m_sSpace3Tab = ConstCompo.DDF_SPACE6
+         m_sSpaceHype = ConstCompo.DDF_HYPHEN_2
+      End If
+
       ' imposto unità di misura per interfaccia utente
       m_bIsMmUnit = (GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0)
       EgtSetUiUnits(m_bIsMmUnit)
       m_SelectedMeasureUnit = m_MeasureUnitList(If(m_bIsMmUnit, 0, 1))
 
+      ' leggo come deve essere visualizzato il programma
+      Dim nDispositionScreen As Integer = GetMainPrivateProfileInt(S_GENERAL, "DispositionScreen", 0)
+      If nDispositionScreen < 0 Or nDispositionScreen > 2 Then
+         m_nDispostionScreen = 0
+      Else
+         m_nDispostionScreen = nDispositionScreen
+      End If
+
       ' imposto tipo di avvio
       Dim nLauncher As Integer = GetMainPrivateProfileInt(S_LAUNCHERWINDOW, K_LAUNCHER, 0)
       m_SelectedOptionLauncher = (nLauncher Mod LoOpenOnce)
@@ -1013,7 +1045,10 @@ Friend Module OptionModule
       If String.IsNullOrEmpty(IniFile.m_sDoorsDirPath) Then Return False
       m_MTableList.Clear()
       Dim sMTableDir As String = IniFile.m_sDoorsDirPath & "\MTables"
-      If Not Directory.Exists(sMTableDir) Then Return False
+      If Not Directory.Exists(sMTableDir) Then
+         EgtOutLog("Directory " & "'" & sMTableDir & "'" & " not found.")
+         Return False
+      End If
       Dim Items As String() = Directory.GetFiles(sMTableDir)
       ' recupero i file che hanno estemsione *.mtl
       For Each MTableFile As String In Items
@@ -1035,7 +1070,10 @@ Friend Module OptionModule
             End If
          End If
       Next
-      If m_MTableList.Count < 1 Then Return False
+      If m_MTableList.Count < 1 Then
+         EgtOutLog("Not valid file in directory " & "'" & sMTableDir & "'" & ".")
+         Return False
+      End If
       ' leggo il nome della MTable attiva
       Dim sSelectedMTable As String = String.Empty
       Dim nbSelected As Boolean = False

OptionsWindow/OptionsV.xaml

@@ -286,7 +286,7 @@
                             <TextBlock Text="{Binding BaseDir}"  Grid.Row="1" Grid.Column="2"  Margin="2,10,5,5"
                                 Style="{StaticResource DoorParamsTxBl}"/>
                             <Button Content="{Binding ChangeConfigMsg}"  Grid.Row="1" Grid.Column="3" 
-                                Command="{Binding BrowseCommand}" Margin="5"
+                                Command="{Binding BrowseCommand}" Margin="5" MaxHeight="28"
                                 CommandParameter="ConfigDir"/>
                         </Grid>
                     </GroupBox>

OptionsWindow/OptionsViewModel.vb

@@ -172,6 +172,7 @@ Public Class OptionsVM
          NotifyPropertyChanged("ConfigDir")
          OptionModule.GetCurrentMachineInMTable()
          NotifyPropertyChanged("CurrentMachine")
+         NotifyPropertyChanged("BaseDir")
       End Set
    End Property
 
@@ -193,6 +194,28 @@ Public Class OptionsVM
       End Get
       Set(value As String)
          If value IsNot OptionModule.m_SelectedMeasureUnit Then
+
+            Dim sMessage As String = "The program will be shut down, do you want to proced?"
+            Dim bRestartProgram As Boolean = EnableConfig
+            If bRestartProgram Then
+               sMessage = "The program will be restart, do you want to proced?"
+            End If
+
+            ' chiedo se desidera procedere con lo spegnimento del programma
+            If MessageBox.Show(sMessage, "Warning", MessageBoxButton.OKCancel, MessageBoxImage.Exclamation, MessageBoxResult.Cancel) = MessageBoxResult.OK Then
+               ' procedo alla chiusura del programma
+               Map.refMainWindowVM.CloseApplication()
+               If bRestartProgram Then Process.Start(Application.ResourceAssembly.Location)
+            Else
+               ' esco senza salvare la selezione
+               Return
+            End If
+            ' sa la chiusura del porgramma è stata interotta
+            If Map.refMainWindowVM.StopClosingApplication Then
+               ' esco senza salvare la selezione
+               Return
+            End If
+
             OptionModule.m_bIsMmUnit = (value = OptionModule.m_MeasureUnitList(0))
             EgtSetUiUnits(OptionModule.m_bIsMmUnit)
             WriteMainPrivateProfileString(S_SCENE, K_MMUNITS, If(OptionModule.m_bIsMmUnit, "1", "0"))
@@ -2043,8 +2066,8 @@ Public Class OptionsVM
          End If
       Next
 
-      If m_IsChangedConfig AndAlso EnableConfig AndAlso m_OrigBaseDir <> IniFile.m_sDoorsDirPath AndAlso m_OrigMTable <> OptionModule.m_SelectedMTable.Name Then
-         ' aggiorno il file Config.ini dell'EgtCAM5
+      If EnableConfig AndAlso m_IsChangedConfig Then
+         ' Se modifico il direttorio Compo: aggiorno il file Config.ini dell'EgtCAM5
          EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
          ' assegno variabili
          EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
@@ -2059,6 +2082,18 @@ Public Class OptionsVM
          Map.refMainWindowVM.CloseApplication()
          Process.Start(Application.ResourceAssembly.Location)
          'End If
+      ElseIf EnableConfig AndAlso m_OrigMTable <> OptionModule.m_SelectedMTable.Name Then
+         ' aggiorno il file Config.ini dell'EgtCAM5
+         EgtLuaExecFile(IniFile.m_sConfigDir & "\ChangeConfig.lua")
+         ' assegno variabili
+         EgtLuaSetGlobStringVar("CCD.NewBaseDir", IniFile.m_sDoorsDirPath)
+         EgtLuaSetGlobStringVar("CCD.NewMTable", OptionModule.m_SelectedMTable.Name)
+         ' eseguo la funzione che esegue la scrittura delle variabili
+         EgtLuaCallFunction("CCD.ChangeConfigDirectory")
+         Dim sVal As String = ""
+         EgtLuaGetGlobStringVar("CCD.NewMachineName", sVal)
+         OptionModule.m_CurrentMachine = sVal
+         EgtLuaResetGlobVar("CCD")
       End If
 
    End Sub

RegexFunction.vb

@@ -4,6 +4,8 @@ Imports EgtUILib
 Imports EgtWPFLib5
 
 Module RegexFunction
+   Friend sCurrVersionDoor As String = "1"
+
    ' restituisce vero se trova il capitoletto [Graphic parameters]
    Friend Function IsGraphicParametersTitle(sLine As String) As Boolean
       Return Regex.Match(sLine, "\s*--\s*(\[Graphic parameters\])\s*$").Groups(1).Value = "[Graphic parameters]"
@@ -216,8 +218,14 @@ Module RegexFunction
 
    ' Restituisce il nome che precede i due punti (tutti i caratteri dall'inizio della stringa)
    Friend Function GetName(sLine As String) As String
+      ' La versione deve essere impostata in fase di lettura della porta
       Dim sTmp As String = RemoveComment(sLine)
-      If String.IsNullOrWhiteSpace(sTmp) OrElse Char.IsWhiteSpace(sTmp, 0) Then Return ""
+      If sCurrVersionDoor = "2" Then
+         If String.IsNullOrWhiteSpace(sTmp) OrElse sTmp.StartsWith(OptionModule.m_sSpaceHype) OrElse sTmp.StartsWith(OptionModule.m_sSpace3Tab) Then Return ""
+      Else
+         If String.IsNullOrWhiteSpace(sTmp) OrElse Char.IsWhiteSpace(sTmp, 0) Then Return ""
+      End If
+      Dim sString As String = Regex.Match(RemoveComment(sLine), "\s*(.*?\b)\s*:.*").Groups(1).Value
       Return Regex.Match(RemoveComment(sLine), "\s*(.*?\b)\s*:.*").Groups(1).Value
    End Function
 

Utility.vb

@@ -43,14 +43,14 @@ Public Module Utility
       Dim sLockFile As String = GenerateLockFileName(CurrDirectory, CurrFile)
       Dim bIsLocked As Boolean = False
       Dim FileList As String() = Directory.GetFiles(CurrDirectory)
-      
+
       ' recurpero il nome del primo file bloccato nel direttorio corrente (se non è specificato un file)
-      If String.IsNullOrEmpty(CurrFile) then
-         Try 
+      If String.IsNullOrEmpty(CurrFile) Then
+         Try
             sLockFile = FileList.First(Function(x) x.EndsWith(LCK_EXTENSION))
          Catch ex As Exception
          End Try
-      End If 
+      End If
 
       If File.Exists(sLockFile) Then
          Try
@@ -104,9 +104,9 @@ Public Module Utility
       m_CurrLockFile = GenerateLockFileName(CurrDirectory, CurrFile)
       m_StopSaving = False
       'If VerifyFileLocked(CurrDirectory, CurrFile) Then Return False
-      If Not IsNothing(Map.refMainWindowVM.AssemblyManagerControl) then
+      If Not IsNothing(Map.refMainWindowVM.AssemblyManagerControl) Then
          Map.refMainWindowVM.AssemblyManagerControl.Visibility = Visibility.Visible
-      End If     
+      End If
       Try
          Dim NomeUtente As String = Environment.MachineName & "/" & Environment.UserName
          File.WriteAllText(m_CurrLockFile, NomeUtente, New System.Text.UTF8Encoding(False))
@@ -358,6 +358,22 @@ Public Module Utility
       Return True
    End Function
 
+   Friend Function DirectInchesToMm(ByRef sMeasure As String) As Boolean
+      Dim dVal As Double = 0.0
+      If Not StringToDouble(sMeasure, dVal) Then Return False
+      dVal = dVal * ONEINCH
+      sMeasure = DoubleToString(dVal, 3)
+      Return True
+   End Function
+
+   Friend Function DirectMmToInches(ByRef sMeasure As String) As Boolean
+      Dim dVal As Double = 0.0
+      If Not StringToDouble(sMeasure, dVal) Then Return False
+      dVal = dVal / ONEINCH
+      sMeasure = DoubleToString(dVal, 4)
+      Return True
+   End Function
+
    Friend Function ConvertCurrentUnitMeasure(ByRef sMeasure As String) As Boolean
       If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES Then
          ' non eseguo nessun tipo di conversione
@@ -388,10 +404,10 @@ Public Module Utility
    ' conevrsione in lettura dei valori delle textbox nel DoorCreator/HardwareManager
    Friend Function ConvertCompoConfig(ByRef sItems As String, ByRef dControlValue As Double) As Boolean
       Dim dDefaultValue As Double = 0
-      If sItems.Contains("$") then
+      If sItems.Contains("$") Then
          sItems = "$"
-         Return true
-      end
+         Return True
+         End
       End If
       If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES And Not OptionModule.m_IsMM Then
          ' Concordi = Inches
@@ -453,6 +469,28 @@ Public Module Utility
       Return False
    End Function
 
+   Friend Function ConvertDDFValueIntoCurrentUnit(sCurrUnitDDF As String, ByRef sValue As String) As Boolean
+      Dim bCurrUnitDDFIsMM As Boolean = ConvertStringToMmUnits(sCurrUnitDDF)
+      Dim dDefaultValue As Double = 0
+      If OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES And Not bCurrUnitDDFIsMM Then
+         ' non eseguo cenversione: Concordi = Inches
+         Return True
+      ElseIf OptionModule.m_SelectedMeasureUnit = ConstGen.VAL_INCHES And bCurrUnitDDFIsMM Then
+         ' eseguo conversione: Discordi= MM → Inches
+         DirectMmToInches(sValue)
+         'InchesToMm(sValue)
+         Return True
+      ElseIf OptionModule.m_SelectedMeasureUnit = ConstGen.MM And Not bCurrUnitDDFIsMM Then
+         ' eseguo conversione: Discordi= Inches → MM
+         DirectInchesToMm(sValue)
+         Return True
+      ElseIf OptionModule.m_SelectedMeasureUnit = ConstGen.MM And bCurrUnitDDFIsMM Then
+         ' non eseguo cenversione: Concordi = MM
+         Return True
+      End If
+      Return False
+   End Function
+
    ' Converte il valore Boolean in una stringa ON/OFF (attributo machining)
    Friend Function ConvertBooleanToOnOff(bValue As Boolean) As String
       Return If(bValue, DDF_ON, DDF_OFF)
@@ -468,9 +506,9 @@ Public Module Utility
    End Function
 
    Friend Function ConvertStringToMmUnits(sUnit As String) As Boolean
-      If Trim(sUnit) = ConstGen.MM Then
+      If Trim(sUnit).ToLower = ConstGen.MM.ToLower Then
          Return True
-      ElseIf Trim(sUnit) = ConstGen.VAL_INCHES Then
+      ElseIf Trim(sUnit).ToLower = ConstGen.VAL_INCHES.ToLower Then
          Return False
       Else
          Return OptionModule.m_bIsMmUnit