-aggiunto focus quando viene mostrata la textbox per inserire la info

- piccola modifica in simulazione per gestire Flag=12 quasi come 11 (pausa richiesta da sotto).

Base/TreeView/TreeViewItemBase.vb

@@ -1,5 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports System.ComponentModel
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
 
 ' Classe che definisce un elemento di base del TreeView
 Public Class TreeViewItemBase
@@ -31,7 +33,7 @@ Public Class TreeViewItemBase
       End Set
    End Property
 
-   Private m_isExpanded As Boolean
+   Friend m_isExpanded As Boolean
    Public Property IsExpanded As Boolean
       Get
          Return m_isExpanded
@@ -92,6 +94,7 @@ Public Class InheritableTreeViewItem
    Implements INotifyPropertyChanged
 
    Friend m_Name As String
+
    Public Property Name As String
       Get
          Return m_Name
@@ -195,7 +198,6 @@ Public Class ParentItem
    Inherits TreeViewItemBase
 
    Private m_sPictureString As String
-   Private m_Items As ObservableCollection(Of ChildItem)
 
    Public Property PictureString As String
       Get
@@ -209,6 +211,7 @@ Public Class ParentItem
       End Set
    End Property
 
+   Private m_Items As ObservableCollection(Of ChildItem)
    Public Property Items As ObservableCollection(Of ChildItem)
       Get
          Return m_Items
@@ -255,4 +258,4 @@ Public Class ChildItem
       MyBase.New(Name, IsSelected, IsExpanded, IsActive)
    End Sub
 
-End Class
+End Class

Constants/ConstIni.vb

@@ -73,7 +73,7 @@ Module ConstIni
    Public Const K_SELSURF As String = "SelSurf"
    Public Const K_SHOWMODE As String = "ShowMode"
    Public Const K_CURVEDIR As String = "CurveDir"
-   Public Const K_SHOWTRIAADV As String = "ShowTriaAdv"
+   Public Const K_SHOWSURFQUALITY As String = "ShowSurfQuality"
    Public Const K_SHOWZMAP As String = "ShowZmap"
    Public Const K_TEXMAXLINPIX As String = "TextureMaxLinPixels"
    Public Const K_ZOOMWIN As String = "ZoomWin"
@@ -189,7 +189,8 @@ Module ConstIni
    Public Const K_SELGEOMSURFFINISHING As String = "SelGeomSurfFinishing"
    Public Const K_SELGEOMSURFROUGHING As String = "SelGeomSurfRoughing"
    Public Const K_SELGEOMFIVEAXMILLING As String = "SelGeomFiveAxMilling"
-   Public Const K_SELVMILLQUALITY As String = "VMillQuality"
+   Public Const K_SELGEOMPROBING As String = "SelGeomProbing"
+   Public Const K_VMILLQUALITY As String = "VMillQuality"
    Public Const K_MACHININGGROUP As String = "MachiningGroup"
    Public Const K_SHOWONLYTABLE As String = "ShowOnlyTable"
    Public Const K_MOVETHROUGHDISPS As String = "MoveThroughDisps"
@@ -198,6 +199,7 @@ Module ConstIni
    Public Const S_SIMUL As String = "Simul"
    Public Const K_SLIDERX As String = "SliderX"
    Public Const K_SLIDERVAL As String = "SliderVal"
+   Public Const K_TRACEENABLE As String = "TraceEnable"
 
    Public Const S_OPTIONS As String = "Options"
    Public Const K_NEWMACHININGISLASTONE As String = "NewMachiningIsLastOne"

Constants/ConstMachIni.vb

@@ -1,6 +1,13 @@
 Module ConstMachIni
 
+   Public Const S_MCH_GENERAL As String = "General"
+   Public Const K_MATERIAL As String = "Material"
+
+   Public Const S_PARTPROGRAM As String = "PartProgram"
+   Public Const K_EXTENSION As String = "Extension"
+
    Public Const S_TOOLS As String = "Tools"
+   Public Const K_PROBE As String = "Probe"
    Public Const K_DRILLBIT As String = "Drillbit"
    Public Const K_SAWBLADE As String = "Sawblade"
    Public Const K_MILL As String = "Mill"
@@ -8,22 +15,17 @@
    Public Const K_CHISEL As String = "Chisel"
    Public Const K_WATERJET As String = "WaterJet"
    Public Const K_COMPO As String = "Compo"
-   Public Const K_SHOWTOOLCHANGER As String = "ShowToolChanger"
-   Public Const K_SHOWHEADEXIT As String = "ShowHeadExit"
-   Public Const K_DRILLHOLDER As String = "DrillHolder"
-   Public Const K_SAWBLADEHOLDER As String = "SawBladeHolder"
-   Public Const K_MILLHOLDER As String = "MillHolder"
    Public Const K_DRILLMAKER As String = "DrillMaker"
    Public Const K_SAWBLADEMAKER As String = "SawbladeMaker"
    Public Const K_MILLMAKER As String = "MillMaker"
    Public Const K_MORTISEMAKER As String = "MortiseMaker"
    Public Const K_CHISELMAKER As String = "ChiselMaker"
-   Public Const K_MOUNTEDTOOLCONFIG As String = "MountedToolConfig"
    Public Const K_ACTIVE As String = "Active"
 
    Public Const S_TOOLHOLDER As String = "ToolHolder"
 
    Public Const S_MACHININGS As String = "Machinings"
+   Public Const K_PROBING As String = "Probing"
    Public Const K_SAWING As String = "Sawing"
    Public Const K_DRILLING As String = "Drilling"
    Public Const K_MILLING As String = "Milling"
@@ -37,18 +39,12 @@
    Public Const K_SURFFINISHING As String = "SurfFinishing"
    Public Const K_5AXMILLING As String = "5AxMilling"
    Public Const K_WATERJETTING As String = "WaterJetting"
-   Public Const K_SAWINGONARCS As String = "SawingOnArcs"
 
    Public Const S_GENMACHINING As String = "GenMachining"
    Public Const K_GENSCRIPT As String = "GenScript"
 
-   Public Const S_TOOLCHANGER As String = "ToolChanger"
-   Public Const K_NUMBER As String = "Number"
-   Public Const K_POS As String = "Pos"
-   Public Const K_NAME As String = "Name"
-   Public Const K_MANUALNUMBER As String = "ManualNumber"
-   Public Const K_MANUALPOS As String = "ManualPos"
-   Public Const K_MANUALNAME As String = "ManualName"
+   Public Const S_5AXMILLING As String = "5AxMilling"
+   Public Const K_5AXSCRIPT As String = "5AxScript"
 
    Public Const S_DISPOSITION As String = "Disposition"
    Public Const K_DISP_INITSCRIPT As String = "InitScript"
@@ -68,7 +64,16 @@
    Public Const S_VMILL As String = "VMill"
    Public Const K_VM_ENABLE As String = "Enable"
 
+   Public Const S_TOOLTRACE As String = "ToolTrace"
+   Public Const K_TT_ENABLE As String = "Enable"
+
    Public Const S_ESTIMATIONS As String = "Estimations"
    Public Const K_EST_ENABLE As String = "Enable"
 
+   ' Tipi di materiali previsti attualmente per le macchine
+   Public Const MCH_MAT_STONE As String = "Stone"
+   Public Const MCH_MAT_WOOD As String = "Wood"
+   Public Const MCH_MAT_BEAM As String = "Beam"
+   Public Const MCH_MAT_ADDITIVE As String = "Additive"
+
 End Module

DrawPanel/DrawPanelV.xaml

@@ -34,6 +34,11 @@
                Command="{Binding ArcCSECommand}" IsEnabled="{Binding bLayerOk}">
                <Image Source="/Resources/DrawPanel/ArcCSE.png" Stretch="Uniform"/>
             </Button>
+            <Button ToolTip="{Binding Arc2PRToolTip}" Style="{StaticResource DrawPanelButton}"
+               ToolTipService.ShowOnDisabled="True"
+               Command="{Binding Arc2PRCommand}" IsEnabled="{Binding bLayerOk}">
+               <Image Source="/Resources/DrawPanel/Arc2PR.png" Stretch="Uniform"/>
+            </Button>
             <Button ToolTip="{Binding Arc3PToolTip}" Style="{StaticResource DrawPanelButton}"
                ToolTipService.ShowOnDisabled="True"
                Command="{Binding Arc3PCommand}" IsEnabled="{Binding bLayerOk}">
@@ -44,21 +49,28 @@
                Command="{Binding ArcPDPCommand}" IsEnabled="{Binding bLayerOk}">
                <Image Source="/Resources/DrawPanel/ArcPDP.png" Stretch="Uniform"/>
             </Button>
-            <Button ToolTip="{Binding CirclePDToolTip}" Style="{StaticResource DrawPanelButton}"
+            <Button ToolTip="{Binding BiArcToolTip}" Style="{StaticResource DrawPanelButton}"
+               ToolTipService.ShowOnDisabled="True"
+               Command="{Binding BiArcCommand}" IsEnabled="{Binding bLayerOk}">
+               <Image Source="/Resources/DrawPanel/BiArc.png" Stretch="Uniform"/>
+            </Button>
+            <Button Style="{StaticResource DrawPanelButton}"
+                    Visibility="Hidden"/>
+            <Button ToolTip="{Binding CircleCPToolTip}" Style="{StaticResource DrawPanelButton}"
                ToolTipService.ShowOnDisabled="True"
                Command="{Binding CircleCPCommand}" IsEnabled="{Binding bLayerOk}">
                <Image Source="/Resources/DrawPanel/CircleCP.png" Stretch="Uniform"/>
             </Button>
-            <Button ToolTip="{Binding Circle3PToolTip}" Style="{StaticResource DrawPanelButton}"
-               ToolTipService.ShowOnDisabled="True"
-               Command="{Binding Circle3PCommand}" IsEnabled="{Binding bLayerOk}">
-               <Image Source="/Resources/DrawPanel/Circle3P.png" Stretch="Uniform"/>
-            </Button>
             <Button ToolTip="{Binding CircleCDToolTip}" Style="{StaticResource DrawPanelButton}"
                ToolTipService.ShowOnDisabled="True"
                Command="{Binding CircleCDCommand}" IsEnabled="{Binding bLayerOk}">
                <Image Source="/Resources/DrawPanel/CircleCD.png" Stretch="Uniform"/>
             </Button>
+            <Button ToolTip="{Binding Circle3PToolTip}" Style="{StaticResource DrawPanelButton}"
+               ToolTipService.ShowOnDisabled="True"
+               Command="{Binding Circle3PCommand}" IsEnabled="{Binding bLayerOk}">
+               <Image Source="/Resources/DrawPanel/Circle3P.png" Stretch="Uniform"/>
+            </Button>
             <Button ToolTip="{Binding Rectangle2PToolTip}" Style="{StaticResource DrawPanelButton}"
                ToolTipService.ShowOnDisabled="True"
                Command="{Binding Rectangle2PCommand}" IsEnabled="{Binding bLayerOk}">

DrawPanel/DrawPanelVM.vb

@@ -50,7 +50,7 @@ Public Class DrawPanelVM
          Return EgtMsg(MSG_DRAWPANEL + 3)
       End Get
    End Property
-   Public ReadOnly Property CirclePDToolTip As String
+   Public ReadOnly Property CircleCPToolTip As String
       Get
          Return EgtMsg(MSG_DRAWPANEL + 4)
       End Get
@@ -72,14 +72,25 @@ Public Class DrawPanelVM
    End Property
    Public ReadOnly Property Arc3PToolTip As String
       Get
-         Return EgtMsg(MSG_DRAWPANEL + 7)
+         Return EgtMsg(5207)
+      End Get
+   End Property
+   Public ReadOnly Property Arc2PRToolTip As String
+      Get
+         Return EgtMsg(5169)
       End Get
    End Property
    Public ReadOnly Property ArcPDPToolTip As String
       Get
          Return EgtMsg(MSG_DRAWPANEL + 8)
       End Get
+   End Property  
+   Public ReadOnly Property BiArcToolTip As String
+      Get
+         Return EgtMsg(5170)
+      End Get
    End Property
+
    Public ReadOnly Property Rectangle2PToolTip As String
       Get
          Return EgtMsg(MSG_DRAWPANEL + 11)
@@ -470,7 +481,9 @@ Public Class DrawPanelVM
    Private m_cmdCircle3P As ICommand
    Private m_cmdArcCSE As ICommand
    Private m_cmdArc3P As ICommand
+   Private m_cmdArc2PR As ICommand
    Private m_cmdArcPDP As ICommand
+   Private m_cmdBiArc As ICommand
    Private m_cmdRectangle2P As ICommand
    Private m_cmdPolygon As ICommand
    Private m_cmdPolygonSide As ICommand
@@ -748,6 +761,29 @@ Public Class DrawPanelVM
 
 #End Region ' Arc3PCommand
 
+#Region "Arc2PRCommand"
+
+   ''' <summary>
+   ''' Returns a command that do Arc2PR.
+   ''' </summary>
+   Public ReadOnly Property Arc2PRCommand As ICommand
+      Get
+         If m_cmdArc2PR Is Nothing Then
+            m_cmdArc2PR = New RelayCommand(AddressOf Arc2PR)
+         End If
+         Return m_cmdArc2PR
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Arc2PR.  This method is invoked by the Arc2PRCommand.
+   ''' </summary>
+   Public Sub Arc2PR(ByVal param As Object)
+      Map.refProjectVM.GetController.ExecuteCommand(Controller.CMD.ARC2PR)
+   End Sub
+
+#End Region ' Arc2PRCommand
+
 #Region "ArcPDPCommand"
 
    ''' <summary>
@@ -778,6 +814,33 @@ Public Class DrawPanelVM
 
 #End Region ' ArcPDPCommand
 
+#Region "BiArcCommand"
+
+   ''' <summary>
+   ''' Returns a command that do BiArc.
+   ''' </summary>
+   Public ReadOnly Property BiArcCommand As ICommand
+      Get
+         If m_cmdBiArc Is Nothing Then
+            m_cmdBiArc = New RelayCommand(AddressOf BiArc)
+         End If
+         Return m_cmdBiArc
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the BiArc.  This method is invoked by the BiArcCommand.
+   ''' </summary>
+   Public Sub BiArc(ByVal param As Object)
+      If (Keyboard.Modifiers And ModifierKeys.Shift) <> ModifierKeys.Shift Then
+         Map.refProjectVM.GetController.ExecuteCommand(Controller.CMD.BIARC)
+      Else
+         Map.refProjectVM.GetController.ExecuteCommand(Controller.CMD.CURVEBEZIER)
+      End If
+   End Sub
+
+#End Region ' BiArcCommand
+
 #Region "Rectangle2PCommand"
 
    ''' <summary>

EgtCAM5.vbproj

@@ -173,6 +173,9 @@
       <DependentUpon>EstimationsExpanderV.xaml</DependentUpon>
     </Compile>
     <Compile Include="OptionPanel\MachiningOptionPanel\EstimationsExpander\EstimationsExpander.vb" />
+    <Compile Include="OptionPanel\MachiningOptionPanel\OperationExpander\MachiningParameterExpander\ProbingParameterExpanderV.xaml.vb">
+      <DependentUpon>ProbingParameterExpanderV.xaml</DependentUpon>
+    </Compile>
     <Compile Include="OptionPanel\MachiningOptionPanel\OperationExpander\MachiningParameterExpander\FiveAxisMachinigParameterExpanderV.xaml.vb">
       <DependentUpon>FiveAxisMachinigParameterExpanderV.xaml</DependentUpon>
     </Compile>
@@ -475,6 +478,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="OptionPanel\MachiningOptionPanel\OperationExpander\MachiningParameterExpander\ProbingParameterExpanderV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="OptionPanel\MachiningOptionPanel\OperationExpander\MachiningParameterExpander\FiveAxisMachinigParameterExpanderV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -1038,6 +1045,12 @@
   <ItemGroup>
     <Resource Include="Resources\DrawPanel\StmMoveVertex.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\DrawPanel\Arc2PR.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\DrawPanel\BiArc.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\EgtCAM5\EgtCAM5R32.exe

MachGroupPanel/MyMachGroupPanelVM.vb

@@ -2,7 +2,6 @@
 Imports System.IO
 Imports EgtCAM5.MyMachinePanelVM
 Imports System.Security.Cryptography
-Imports System.Windows.Forms.AxHost
 Imports EgtUILib
 Imports EgtWPFLib5
 
@@ -98,11 +97,11 @@ Public Class MyMachGroupPanelVM
             ' Vuoi creare un nuovo Gruppo di Lavoro con i pezzi selezionati ?    -   LAVORA
             If MessageBox.Show(EgtMsg(5552), EgtMsg(5002), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
                Return If(AddNewMachGroup(nGroupId, vPart), 0, 1)
-         Else
+            Else
                Return -2
             End If
          End If
-      ' Se non ci sono pezzi selezionati
+         ' Se non ci sono pezzi selezionati
       Else
          ' se ci sono gruppi di lavorazione
          If bMachGroup Then
@@ -111,10 +110,10 @@ Public Class MyMachGroupPanelVM
                nGroupId = EgtGetFirstMachGroup()
             End If
             Return If(EgtSetCurrMachGroup(nGroupId), 0, 1)
-         ' se altrimenti ammessi gruppi di lavoro vuoti
+            ' se altrimenti ammessi gruppi di lavoro vuoti
          ElseIf bAllowEmpty Then
             Return If(AddNewMachGroup(nGroupId, vPart), 0, 1)
-         ' altrimenti esco
+            ' altrimenti esco
          Else
             Return -1
          End If
@@ -312,19 +311,19 @@ Public Class MyMachGroupPanelVM
    End Sub
 
    Private Sub LoadMaterialType()
-      Dim sMatType As String = "Wood"
+      Dim sMatType As String = MCH_MAT_WOOD
       ' IniFile.m_sMachineName = Map.refStatusBarVM.SelectedMachine.Name
       ' IniFile.m_sCurrMachIniFilePath = Map.refStatusBarVM.SelectedMachine.MachineDirPath & "\" & Map.refStatusBarVM.SelectedMachine.Name & ".ini"
       Dim sMachineIniPath = IniFile.m_sCurrMachIniFilePath
-      EgtUILib.GetPrivateProfileString(S_GENERAL, EgtWPFLib5.EstConstMachIni.K_MATERIAL, sMatType, sMatType, sMachineIniPath)
+      EgtUILib.GetPrivateProfileString(S_MCH_GENERAL, K_MATERIAL, sMatType, sMatType, sMachineIniPath)
       Select Case sMatType
-         Case "Stone"
+         Case MCH_MAT_STONE
             EgtWPFLib5.MachiningTreeViewItem.m_MatType = MaterialType.STONE
-         Case "Wood"
+         Case MCH_MAT_WOOD
             EgtWPFLib5.MachiningTreeViewItem.m_MatType = MaterialType.WOOD
-         Case "Beam"
+         Case MCH_MAT_BEAM
             EgtWPFLib5.MachiningTreeViewItem.m_MatType = MaterialType.BEAM
-         Case "Additive"
+         Case MCH_MAT_ADDITIVE
             EgtWPFLib5.MachiningTreeViewItem.m_MatType = MaterialType.WOOD
          Case Else
             ' Se il materiale specificato nel file INI della macchina non corrisponde ai 4 sopracitati viene emesso un messaggio di errore 

MachOptionsWindow/MachOptionV.xaml

@@ -16,10 +16,8 @@
 
    <Grid Margin="10">
       <Grid.ColumnDefinitions>          
-         <ColumnDefinition Width="1*"/>
-         <ColumnDefinition Width="1*"/>
-         <ColumnDefinition Width="1*"/>
-         <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="40*"/>
+         <ColumnDefinition Width="20*"/>
       </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="Auto"/>
@@ -28,6 +26,8 @@
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
       </Grid.RowDefinitions>
 
       <UniformGrid Grid.Row="0" Columns="2" Margin="0,0,0,5">
@@ -57,12 +57,24 @@
          </ComboBox>
       </UniformGrid>
 
-      <UniformGrid Grid.Row="4" Columns="2" Margin="0,0,0,5">
+      <UniformGrid Grid.Row="4" Columns="2" Margin="0,0,0,5"
+                   Visibility="{Binding StoneVisibility}">
+         <TextBlock Text="{Binding ExtSawArcMinRadMsg}" VerticalAlignment="Center"/>
+         <TextBox Text="{Binding ExtSawArcMinRad}" Height="25" Margin="10,0,0,0"/>
+      </UniformGrid>
+
+      <UniformGrid Grid.Row="5" Columns="2" Margin="0,0,0,5"
+                   Visibility="{Binding StoneVisibility}">
+         <TextBlock Text="{Binding IntSawArcMaxSideAngMsg}" VerticalAlignment="Center"/>
+         <TextBox Text="{Binding IntSawArcMaxSideAng}" Height="25" Margin="10,0,0,0"/>
+      </UniformGrid>
+
+      <UniformGrid Grid.Row="6" Columns="2" Margin="0,0,0,5">
          <TextBlock Text="{Binding ApproxLinTolMsg}" VerticalAlignment="Center"/>
          <TextBox Text="{Binding ApproxLinTol}" Height="25" Margin="10,0,0,0"/>
       </UniformGrid>
 
-      <UniformGrid Grid.Row="5" Columns="2">
+      <UniformGrid Grid.Row="7" Columns="2">
          <TextBlock Text="{Binding DefaultSetUpMsg}" VerticalAlignment="Center"/>
          <ComboBox ItemsSource="{Binding ArchivedSetUpList}" Height="25" Margin="10,0,0,0"
             SelectedItem="{Binding SelectedDefaultSetUp}" IsEnabled="{Binding IsActiveDefaultSetUp}"/>

MachOptionsWindow/MachOptionVM.vb

@@ -1,5 +1,6 @@
 Imports System.IO
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Public Class MachOptionVM
 
@@ -48,21 +49,6 @@ Public Class MachOptionVM
       End Set
    End Property
 
-   Private m_sApproxLinTol As String
-   Public Property ApproxLinTol As String
-      Get
-         Return m_sApproxLinTol
-      End Get
-      Set(value As String)
-         Dim dApproxLinTol As Double = 0
-         If StringToLen(value, dApproxLinTol) Then
-            EgtMdbSetGeneralParam(MCH_GP.APPROXLINTOL, dApproxLinTol)
-            EgtMdbSave()
-            m_sApproxLinTol = value
-         End If
-      End Set
-   End Property
-
    Private m_SplitArcsList As New List(Of MCH_SA)({MCH_SA.NEVER, MCH_SA.GEN_PLANE, MCH_SA.NO_XY_PLANE, MCH_SA.ALWAYS})
    Public ReadOnly Property SplitArcsList As List(Of MCH_SA)
       Get
@@ -82,6 +68,51 @@ Public Class MachOptionVM
       End Set
    End Property
 
+   Private m_sExtSawArcMinRad As String
+   Public Property ExtSawArcMinRad As String
+      Get
+         Return m_sExtSawArcMinRad
+      End Get
+      Set(value As String)
+         Dim dExtSawArcMinRad As Double = 0
+         If StringToLen(value, dExtSawArcMinRad) Then
+            EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dExtSawArcMinRad)
+            EgtMdbSave()
+            m_sExtSawArcMinRad = value
+         End If
+      End Set
+   End Property
+
+   Private m_sIntSawArcMaxSideAng As String
+   Public Property IntSawArcMaxSideAng As String
+      Get
+         Return m_sIntSawArcMaxSideAng
+      End Get
+      Set(value As String)
+         Dim dIntSawArcMaxSideAng As Double = 0
+         If StringToLen(value, dIntSawArcMaxSideAng) Then
+            EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dIntSawArcMaxSideAng)
+            EgtMdbSave()
+            m_sIntSawArcMaxSideAng = value
+         End If
+      End Set
+   End Property
+
+   Private m_sApproxLinTol As String
+   Public Property ApproxLinTol As String
+      Get
+         Return m_sApproxLinTol
+      End Get
+      Set(value As String)
+         Dim dApproxLinTol As Double = 0
+         If StringToLen(value, dApproxLinTol) Then
+            EgtMdbSetGeneralParam(MCH_GP.APPROXLINTOL, dApproxLinTol)
+            EgtMdbSave()
+            m_sApproxLinTol = value
+         End If
+      End Set
+   End Property
+
    Private m_ArchivedSetUpList As New List(Of String)
    Public Property ArchivedSetUpList As List(Of String)
       Get
@@ -121,11 +152,6 @@ Public Class MachOptionVM
          Return EgtMsg(MSG_MACHININGOPTIONPAGE + 9)
       End Get
    End Property
-   Public ReadOnly Property ApproxLinTolMsg As String
-      Get
-         Return EgtMsg(6410)         ' Tolleranza di approssimazione
-      End Get
-   End Property
 
    Public ReadOnly Property SplitArcsMsg As String
       Get
@@ -133,6 +159,24 @@ Public Class MachOptionVM
       End Get
    End Property
 
+   Public ReadOnly Property ExtSawArcMinRadMsg As String
+      Get
+         Return EgtMsg(6411)         ' Minimo raggio arco esterno con lama
+      End Get
+   End Property
+
+   Public ReadOnly Property IntSawArcMaxSideAngMsg As String
+      Get
+         Return EgtMsg(6412)         ' Massima inclinazione arco interno con lama
+      End Get
+   End Property
+
+   Public ReadOnly Property ApproxLinTolMsg As String
+      Get
+         Return EgtMsg(6410)         ' Tolleranza di approssimazione
+      End Get
+   End Property
+
    Public ReadOnly Property DefaultSetUpMsg As String
       Get
          Return EgtMsg(MSG_MACHININGOPTIONPAGE + 7)
@@ -161,6 +205,14 @@ Public Class MachOptionVM
       Dim nVal As Integer = 0
       EgtMdbGetGeneralParam(MCH_GP.SPLITARCS, nVal)
       m_SelectedSplitArcs = DirectCast(nVal, MCH_SA)
+      ' Leggo minimo raggio arco esterno lavorabile con lama
+      dVal = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
+      m_sExtSawArcMinRad = LenToString(dVal, 4)
+      ' Leggo massima inclinazione lama per lavorare archi interni
+      dVal = 0
+      EgtMdbGetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
+      m_sIntSawArcMaxSideAng = LenToString(dVal, 4)
       ' Leggo tolleranza lineare di approssimazione
       dVal = 0
       EgtMdbGetGeneralParam(MCH_GP.APPROXLINTOL, dVal)
@@ -185,6 +237,17 @@ Public Class MachOptionVM
       End If
    End Sub
 
+#Region "Visibility"  
+   Public ReadOnly Property StoneVisibility As Visibility
+      Get
+         Dim sGenMat As String = ""
+         EgtUILib.GetPrivateProfileString(S_MCH_GENERAL, K_MATERIAL, MCH_MAT_WOOD, sGenMat, IniFile.m_sCurrMachIniFilePath)
+         Return If( sGenMat = MCH_MAT_STONE, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
+#End Region
+
 #Region "COMMANDS"
 
 #Region "CloseMachOptionsCommand"

MainWindow/MainWindowVM.vb

@@ -385,8 +385,8 @@ Public Class MainWindowVM
          EgtSetLockId(sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2703, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2703, 1, IniFile.m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2711, 1, IniFile.m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2711, 1, IniFile.m_nKeyOptions)
       ' Leggo e imposto livello utilizzatore
       IniFile.m_nUserLevel = Math.Min(IniFile.m_nKeyLevel, GetPrivateProfileInt(S_GENERAL, K_USERLEVEL, 1))
       ' Imposto abilitazione lavorazioni avanzate

My Project/AssemblyInfo.vb

@@ -70,6 +70,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.7.3.1")>
-<Assembly: AssemblyFileVersion("2.7.3.1")>
+<Assembly: AssemblyVersion("2.7.11.3")>
+<Assembly: AssemblyFileVersion("2.7.11.3")>
 

My Project/Resources.Designer.vb

@@ -1,7 +1,7 @@
 '------------------------------------------------------------------------------
 ' <auto-generated>
 '     This code was generated by a tool.
-'     Runtime Version:4.0.30319.34209
+'     Runtime Version:4.0.30319.42000
 '
 '     Changes to this file may cause incorrect behavior and will be lost if
 '     the code is regenerated.
@@ -22,7 +22,7 @@ Namespace My.Resources
     '''<summary>
     '''  A strongly-typed resource class, for looking up localized strings, etc.
     '''</summary>
-    <Global.System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0"),  _
+    <Global.System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "17.0.0.0"),  _
      Global.System.Diagnostics.DebuggerNonUserCodeAttribute(),  _
      Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(),  _
      Global.Microsoft.VisualBasic.HideModuleNameAttribute()>  _

My Project/Settings.Designer.vb

@@ -1,7 +1,7 @@
 '------------------------------------------------------------------------------
 ' <auto-generated>
 '     This code was generated by a tool.
-'     Runtime Version:4.0.30319.34209
+'     Runtime Version:4.0.30319.42000
 '
 '     Changes to this file may cause incorrect behavior and will be lost if
 '     the code is regenerated.
@@ -12,15 +12,16 @@ Option Strict On
 Option Explicit On
 
 
-
-<Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(),  _
- Global.System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "12.0.0.0"),  _
- Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)>  _
-Partial Friend NotInheritable Class MySettings
-    Inherits Global.System.Configuration.ApplicationSettingsBase
-    
-    Private Shared defaultInstance As MySettings = CType(Global.System.Configuration.ApplicationSettingsBase.Synchronized(New MySettings()),MySettings)
+Namespace My
     
+    <Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(),  _
+     Global.System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "17.14.0.0"),  _
+     Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)>  _
+    Partial Friend NotInheritable Class MySettings
+        Inherits Global.System.Configuration.ApplicationSettingsBase
+        
+        Private Shared defaultInstance As MySettings = CType(Global.System.Configuration.ApplicationSettingsBase.Synchronized(New MySettings()),MySettings)
+        
 #Region "My.Settings Auto-Save Functionality"
 #If _MyType = "WindowsForms" Then
     Private Shared addedHandler As Boolean
@@ -28,17 +29,17 @@ Partial Friend NotInheritable Class MySettings
     Private Shared addedHandlerLockObject As New Object
 
     <Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
-    Private Shared Sub AutoSaveSettings(ByVal sender As Global.System.Object, ByVal e As Global.System.EventArgs)
+    Private Shared Sub AutoSaveSettings(sender As Global.System.Object, e As Global.System.EventArgs)
         If My.Application.SaveMySettingsOnExit Then
             My.Settings.Save()
         End If
     End Sub
 #End If
 #End Region
-    
-    Public Shared ReadOnly Property [Default]() As MySettings
-        Get
-            
+        
+        Public Shared ReadOnly Property [Default]() As MySettings
+            Get
+                
 #If _MyType = "WindowsForms" Then
                If Not addedHandler Then
                     SyncLock addedHandlerLockObject
@@ -49,10 +50,11 @@ Partial Friend NotInheritable Class MySettings
                     End SyncLock
                 End If
 #End If
-            Return defaultInstance
-        End Get
-    End Property
-End Class
+                Return defaultInstance
+            End Get
+        End Property
+    End Class
+End Namespace
 
 Namespace My
     
@@ -62,9 +64,9 @@ Namespace My
     Friend Module MySettingsProperty
         
         <Global.System.ComponentModel.Design.HelpKeywordAttribute("My.Settings")>  _
-        Friend ReadOnly Property Settings() As Global.EgtCAM5.MySettings
+        Friend ReadOnly Property Settings() As Global.EgtCAM5.My.MySettings
             Get
-                Return Global.EgtCAM5.MySettings.Default
+                Return Global.EgtCAM5.My.MySettings.Default
             End Get
         End Property
     End Module

OptionPanel/DrawOptionPanel/InfoExpander/InfoExpanderV.xaml

@@ -3,7 +3,7 @@
              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
 
    <Expander IsExpanded="{Binding IsEnabled}" IsEnabled="{Binding IsEnabled}"
-      Style="{StaticResource ExpanderStyle}">
+             Style="{StaticResource ExpanderStyle}">
       <Expander.Header>
          <TextBlock Text="{Binding PropertiesMsg}"/>
       </Expander.Header>

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderV.xaml

@@ -1,9 +1,11 @@
 <UserControl x:Class="InputExpanderV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtCAM5="clr-namespace:EgtCAM5"
+             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5">
 
    <Expander Header="{Binding Title}" IsExpanded="{Binding IsExpanded}" IsEnabled="{Binding IsEnabled}"
-      Style="{StaticResource ExpanderStyle}">
+             Style="{StaticResource ExpanderStyle}">
       <StackPanel>
          <StackPanel.Style>
             <Style TargetType="{x:Type StackPanel}">
@@ -16,27 +18,42 @@
          </StackPanel.Style>
          <TextBlock Text="{Binding TextBlock}"
                     Visibility="{Binding TextVisibility}" Margin="5,5,0,5"/>
-         <TextBox x:Name="Txt" Text="{Binding TextBox,UpdateSourceTrigger=PropertyChanged}"  
-                  PreviewKeyDown="TextBox_PreviewKeyDown" Height="Auto"
-                  Visibility="{Binding TextVisibility}" Margin="5,0,5,5" >
-            <TextBox.InputBindings>
-               <KeyBinding Key="Enter" Command="{Binding DoneCommand}"/>
-               <KeyBinding Key="S" Modifiers="Control" Command="{Binding ShowCommand}"/>
-            </TextBox.InputBindings>
-         </TextBox>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="Auto"/>
+            </Grid.ColumnDefinitions>
+            <TextBox x:Name="Txt" Text="{Binding TextBox,UpdateSourceTrigger=PropertyChanged}"                       
+                     PreviewKeyDown="TextBox_PreviewKeyDown" IsVisibleChanged="Txt_IsVisibleChanged"
+                     Visibility="{Binding TextVisibility}" Height="Auto" Margin="5,0,5,5" >
+               <TextBox.InputBindings>
+                  <KeyBinding Key="Enter" Command="{Binding DoneCommand}"/>
+                  <KeyBinding Key="S" Modifiers="Control" Command="{Binding ShowCommand}"/>
+               </TextBox.InputBindings>
+            </TextBox>
+            <Button Grid.Column="1" 
+                    Content="+"
+                    Command="{Binding ShowInfoItemCommand}"
+                    Visibility="{Binding ShowInfoItemVisibility}"
+                    Width="20"
+                    Height="20"
+                    Margin="5,-1,5,0" 
+                    VerticalAlignment="Top"/>
+         </Grid>
          <CheckBox Content="{Binding CheckBoxText}" IsChecked="{Binding IsChecked}"
                    Visibility="{Binding CheckVisibility}" Margin="5,0,5,5"/>
          <ComboBox ItemsSource="{Binding ComboItemsList}" SelectedIndex="{Binding ComboSelectedIndex}"
-                   Visibility="{Binding ComboVisibility}" Margin="5,0,5,5"/>
+                   Visibility="{Binding ComboVisibility}" Margin="5,5,5,5"/>
+
          <Grid Margin="5,0,5,5">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Button Command="{Binding ShowCommand}" Visibility="{Binding ShowBtnVisibility}"
-               Content="{Binding ShowMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
+                    Content="{Binding ShowMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
             <Button Command="{Binding DoneCommand}" Grid.Column="1"
-               Content="{Binding OkMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
+                    Content="{Binding OkMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
          </Grid>
       </StackPanel>
    </Expander>

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderV.xaml.vb

@@ -1,10 +1,16 @@
 Public Class InputExpanderV
 
    Private Sub TextBox_PreviewKeyDown(sender As Object, e As KeyEventArgs)
-      If e.Key = Key.Enter And Keyboard.Modifiers = ModifierKeys.Shift Then
+      If (e.Key = Key.Enter And (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift) Or
+         (e.Key = Key.V And (Keyboard.Modifiers And ModifierKeys.Control) = ModifierKeys.Control) Then
          Txt.AcceptsReturn = True
          Txt.TextWrapping = TextWrapping.Wrap
-         Txt.AppendText(Environment.NewLine)
+      End If
+   End Sub
+
+   Private Sub Txt_IsVisibleChanged(sender As Object, e As DependencyPropertyChangedEventArgs)
+      If Txt.IsVisible Then
+         Txt.Focus()
       End If
    End Sub
 

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderVM.vb

@@ -1,11 +1,29 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports MS.Internal
 
 Public Class InputExpanderVM
    Inherits ViewModelBase
 
 #Region "FIELDS & PROPERTIES"
 
+   ' Variabile temporanea per salvare bShow
+   Private m_bTempShow As Boolean
+
+   Private m_tmpInfoList As New ObservableCollection(Of InfoItem)
+   ''' <summary>
+   ''' Lista temporanea delle info
+   ''' </summary>
+   Private Property tmpInfoList As ObservableCollection(Of InfoItem)
+      Get
+         Return m_tmpInfoList
+      End Get
+      Set(value As ObservableCollection(Of InfoItem))
+         m_tmpInfoList = value
+         OnPropertyChanged("tmpInfoList")
+      End Set
+   End Property
+
    ' Expander fields
    Private m_IsExpanded As Boolean
    Public Property IsExpanded As Boolean
@@ -146,9 +164,26 @@ Public Class InputExpanderVM
          Return m_ComboSelectedIndex
       End Get
       Set(value As Integer)
-         Map.refProjectVM.SetLastInteger(value)
+         If m_bTempShow Then Map.refProjectVM.SetLastInteger(value)
          m_ComboSelectedIndex = value
+         Dim tmpComboSelectedIndex As Integer = ComboSelectedIndex
+         If m_ComboSelectedIndex >= 0 AndAlso tmpInfoList.Count > 0 Then
+            ' se la info è presente la aggiungo alla textbox per modificarla
+            If m_TextBox IsNot String.Empty Then
+               If Not m_TextBox.EndsWith(vbCrLf) Then m_TextBox &= vbCrLf
+               m_TextBox &= (tmpInfoList(m_ComboSelectedIndex).sKey & "=" & m_tmpInfoList(m_ComboSelectedIndex).sValour).Trim()
+            ElseIf m_TextBox Is String.Empty Then
+               m_TextBox &= (tmpInfoList(m_ComboSelectedIndex).sKey & "=" & m_tmpInfoList(m_ComboSelectedIndex).sValour).Trim() & vbCrLf
+            End If
+            ComboVisibility = Visibility.Collapsed
+            ComboItemsList.Remove((tmpInfoList(m_ComboSelectedIndex).sKey & "=" & m_tmpInfoList(m_ComboSelectedIndex).sValour).Trim())
+            tmpInfoList.Remove(tmpInfoList(tmpComboSelectedIndex))
+         End If
+         m_ComboSelectedIndex = -1
+         If ComboItemsList.Count <= 0 Then ShowInfoItemVisibility = Visibility.Collapsed
          OnPropertyChanged("ComboSelectedIndex")
+         OnPropertyChanged("ComboItemsList")
+         OnPropertyChanged("TextBox")
       End Set
    End Property
 
@@ -177,9 +212,26 @@ Public Class InputExpanderVM
       End Set
    End Property
 
+   Private m_ShowInfoItemVisibility As Visibility
+   ''' <summary>
+   ''' Propietà visibilità bottone +
+   ''' </summary>
+   Public Property ShowInfoItemVisibility As Visibility
+      Get
+         Return m_ShowInfoItemVisibility
+      End Get
+      Set(value As Visibility)
+         If value <> m_ShowInfoItemVisibility Then
+            m_ShowInfoItemVisibility = value
+            OnPropertyChanged("ShowInfoItemVisibility")
+         End If
+      End Set
+   End Property
+
    ' Commands definition
    Private m_cmdShow As ICommand
    Private m_cmdDone As ICommand
+   Private m_cmdShowInfoItem As ICommand
 
 #Region "Messages"
 
@@ -203,6 +255,7 @@ Public Class InputExpanderVM
    Sub New()
       ' Creo riferimento a questa classe in EgtCAM5Map
       Map.SetRefInputExpanderVM(Me)
+      ComboSelectedIndex = -1
    End Sub
 
 #End Region    ' Constructor
@@ -269,23 +322,66 @@ Public Class InputExpanderVM
 
 #End Region ' DoneCommand
 
+#Region "ShowInfoItemCommand"
+
+   ''' <summary>
+   ''' Comando per la visualizzazione della combobox
+   ''' </summary>
+   Public ReadOnly Property ShowInfoItemCommand As ICommand
+      Get
+         If m_cmdShowInfoItem Is Nothing Then
+            m_cmdShowInfoItem = New Command(AddressOf ShowInfoItem)
+         End If
+         Return m_cmdShowInfoItem
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Funzione per la visualizzazione della combobox
+   ''' </summary>
+   ''' <param name="param"></param>
+   Public Sub ShowInfoItem(ByVal param As Object)
+      ' Se presente info inserita in textbox
+      If m_TextBox IsNot String.Empty Then
+         Dim sSplitItem As String() = m_TextBox.Split("="c)
+         Dim ItemCombo As InfoItem = tmpInfoList.FirstOrDefault(Function(x) x.sKey = sSplitItem(0))
+         If Not IsNothing(ItemCombo) Then
+            ComboItemsList.Remove((ItemCombo.sKey & "=" & ItemCombo.sValour).Trim())
+            tmpInfoList.Remove(ItemCombo)
+         End If
+      End If
+      ComboVisibility = Visibility.Visible
+   End Sub
+
+#End Region    ' ShowInfoItemCommand
+
 #End Region
 
 #Region "METHODS"
 
    Friend Sub PrepareInputBox(PrepareInputBoxParam As PrepareInputBoxParam)
-      Title = PrepareInputBoxParam.sTitle
+      ' Divido il titolo che può contenere comandi dopo il ';'
+      Dim vsSplitTitle As String() = PrepareInputBoxParam.sTitle.Split(";"c)
+      Title = vsSplitTitle(0)
       If PrepareInputBoxParam.sLabel <> "" Then
          TextBlock = PrepareInputBoxParam.sLabel
          TextBox = ""
          TextVisibility = Visibility.Visible
+         ' Se presente il comando "Sic=1"
+         If vsSplitTitle.Count() > 1 AndAlso vsSplitTitle(1) = "Sic=1" Then
+            m_bTempShow = False
+            ComboInfo()
+            If ComboItemsList.Count > 0 Then ShowInfoItemVisibility = Visibility.Visible
+         End If
       End If
       If PrepareInputBoxParam.sCheckLabel <> "" Then
          CheckBoxText = PrepareInputBoxParam.sCheckLabel
          CheckVisibility = Visibility.Visible
       End If
       If PrepareInputBoxParam.bShowCombo Then
+         m_bTempShow = PrepareInputBoxParam.bShowCombo
          ComboItemsList.Clear()
+         tmpInfoList.Clear()
          ComboVisibility = Visibility.Visible
       End If
       If PrepareInputBoxParam.bShowBtn Then
@@ -302,6 +398,7 @@ Public Class InputExpanderVM
       CheckVisibility = Visibility.Collapsed
       ComboVisibility = Visibility.Collapsed
       ShowBtnVisibility = Visibility.Collapsed
+      ShowInfoItemVisibility = Visibility.Collapsed
       IsExpanded = False
       IsEnabled = False
    End Sub
@@ -329,12 +426,37 @@ Public Class InputExpanderVM
 
    Private Function AddInputBoxCombo(ByVal sText As String, ByVal bSelected As Boolean) As Boolean
       ComboItemsList.Add(sText)
+
       If bSelected Then
          ComboSelectedIndex = ComboItemsList.Count - 1
       End If
       Return True
    End Function
 
+   ''' <summary>
+   ''' Funzione che popola la lista ComboItemsList
+   ''' </summary>
+   Private Sub ComboInfo()
+      tmpInfoList.Clear()
+      ComboItemsList.Clear()
+
+      Dim vsVal As String() = Nothing
+      EgtGetAllInfo(Map.refManageLayerExpanderVM.RightClickedTreeItemId, vsVal)
+
+      If Not m_bTempShow And Not IsNothing(vsVal) Then
+         Dim Ind As Integer = 0
+         For Each Item As String In vsVal
+            Dim sSplitItem As String() = Item.Split("="c)
+            tmpInfoList.Add(New InfoItem(Ind, sSplitItem(0), sSplitItem(1)))
+            Ind += 1
+         Next
+
+         For Each InfoItem As InfoItem In tmpInfoList
+            ComboItemsList.Add((InfoItem.sKey & "=" & InfoItem.sValour).Trim())
+         Next
+      End If
+   End Sub
+
 #End Region    ' Methods
 
 End Class

OptionPanel/DrawOptionPanel/ManageLayerExpander/LayerTreeView.vb

@@ -74,12 +74,12 @@ Public Class LayerTreeViewItem
             m_bOnOff = value
             ' se abilitato, eseguo operazione
             If m_SendCmd Then
-               Map.refProjectVM.SetLastInteger(Id)
                If value Then
-                  Map.refProjectVM.ExecuteCommand(Controller.CMD.SHOW)
+                  EgtSetStatus(Id, GDB_ST.ON_)
                Else
-                  Map.refProjectVM.ExecuteCommand(Controller.CMD.HIDE)
+                  EgtSetStatus(Id, GDB_ST.OFF)
                End If
+               EgtDraw()
             End If
             Dim bOnOffGroup As Boolean = ((Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift) AndAlso Items.Count > 0
             If bOnOffGroup Then

OptionPanel/DrawOptionPanel/ManageLayerExpander/ManageLayerExpanderV.xaml

@@ -1,9 +1,9 @@
 <UserControl x:Class="ManageLayerExpanderV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:interactivity="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
-   xmlns:expression="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"
-   xmlns:local="clr-namespace:EgtCAM5">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:interactivity="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
+             xmlns:expression="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"
+             xmlns:local="clr-namespace:EgtCAM5">
 
    <Expander IsExpanded="True" Style="{StaticResource ExpanderStyle}">
       <Expander.Header>
@@ -20,11 +20,11 @@
             <Button Content="{Binding NewLayerMsg}" Command="{Binding NewLayerCommand}"  Height="30"/>
             <Button Content="{Binding ColorMsg}" Command="{Binding LayerColorCommand}"  Height="30"/>
          </UniformGrid>
-         
-         <TreeView Name="LayerTreeView" MinHeight="150" MaxHeight="250" 
-            ItemsSource="{Binding Path=LayerList}"
-            VirtualizingStackPanel.IsVirtualizing = "True"
-            VirtualizingStackPanel.VirtualizationMode = "Recycling">
+
+         <TreeView x:Name="LayerTreeView" MinHeight="300" MaxHeight="400" 
+                   ItemsSource="{Binding Path=LayerList}"
+                   VirtualizingStackPanel.IsVirtualizing = "True"
+                   VirtualizingStackPanel.VirtualizationMode = "Recycling">
             <interactivity:Interaction.Triggers>
                <interactivity:EventTrigger EventName="MouseDoubleClick">
                   <interactivity:InvokeCommandAction Command="{Binding TreeViewDoubleClickCommand}"/>
@@ -50,8 +50,8 @@
                         <ColumnDefinition Width="Auto"/>
                      </Grid.ColumnDefinitions>
 
-                     <ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}" Grid.Column="0"
-                                   IsChecked="{Binding OnOff}" Visibility="{Binding IsHidden}" Focusable="False" Height="15" Width="15" Margin="0,0,5,0"/>
+                     <ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}" Grid.Column="0" 
+                                   IsChecked="{Binding OnOff}" Visibility="{Binding IsHidden}" Focusable="True" Height="15" Width="15" Margin="0,0,5,0"/>
                      <Image Grid.Column="1" Source="{Binding PictureString}" Height="15" Margin="0,0,5,0"/>
                      <TextBlock Grid.Column="2" Text="{Binding Name}" Margin="0,0,5,0"/>
                      <Ellipse Grid.Column="3" Height="10" Width="10" Fill="{Binding LayerColor}" />
@@ -61,7 +61,7 @@
             </TreeView.Resources>
 
             <!--Style dei nodi CathegoryItem che li riquadra di azzurro quando clicckati ed elimina l'ombra grigia 
-            che si presenta quando la categoria rimane vuota (ombra causata dal multibinding).--> 
+            che si presenta quando la categoria rimane vuota (ombra causata dal multibinding).-->
             <TreeView.ItemContainerStyle>
                <Style TargetType="{x:Type TreeViewItem}">
                   <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" />

OptionPanel/DrawOptionPanel/ManageLayerExpander/ManageLayerExpanderVM.vb

@@ -166,7 +166,7 @@ Public Class ManageLayerExpanderVM
    Public Sub NewPart(ByVal param As Object)
       Map.refProjectVM.ExecuteCommand(Controller.CMD.NEWPART)
       ' Seleziono nell'albero il layer del pezzo appena creato
-      SelectIdInObjTree(EgtGetCurrLayer(), False)
+      SelectIdInObjTreeNoMark(EgtGetCurrLayer())
    End Sub
 
 #End Region ' NewPartCommand
@@ -191,7 +191,7 @@ Public Class ManageLayerExpanderVM
    Public Sub NewLayer(ByVal param As Object)
       Map.refProjectVM.ExecuteCommand(Controller.CMD.NEWLAYER)
       ' Seleziono nell'albero il layer appena creato
-      SelectIdInObjTree(EgtGetCurrLayer(), False)
+      SelectIdInObjTreeNoMark(EgtGetCurrLayer())
    End Sub
 
 #End Region ' NewLayerCommand
@@ -492,7 +492,7 @@ Public Class ManageLayerExpanderVM
       Map.refProjectVM.SetLastInteger(RightClickedTreeItemId)
       Map.refProjectVM.ExecuteCommand(Controller.CMD.DELETE)
       ' Seleziono prossimo
-      SelectIdInObjTree(nNewId, False)
+      SelectIdInObjTreeNoMark(nNewId)
    End Sub
 
 #End Region ' DeleteCommand
@@ -528,16 +528,18 @@ Public Class ManageLayerExpanderVM
 #Region "METHODS"
 
    Private WithEvents ObjTreeTimer As New System.Windows.Threading.DispatcherTimer
-   Private m_nObjTreeOldId As Integer = GDB_ID.NULL
+   Friend m_nObjTreeOldId As Integer = GDB_ID.NULL
    Private m_nObjTreeMenuId As Integer = GDB_ID.NULL
    Private m_bEnableUpdateObjInObjTree As Boolean = True
 
    Friend Sub SelectIdInObjTreeNoMark(nId As Integer)
-      SelectIdInObjTree(nId, False)
+      LayerTreeViewItem.m_MarkOnSel = False
+      MySelectIdInObjTree(nId)
+      LayerTreeViewItem.m_MarkOnSel = True
    End Sub
 
    Friend Sub SelectIdInObjTree(nId As Integer)
-      SelectIdInObjTree(nId, True)
+      MySelectIdInObjTree(nId)
    End Sub
 
    Friend Sub UpdateObjTreeOldId(ObjTreeOldId As Integer)
@@ -581,7 +583,7 @@ Public Class ManageLayerExpanderVM
       AddGroupInObjTree(GDB_ID.ROOT, GDB_LV.USER, GDB_MD.STD, 0, LayerList)
       If nOldId <> GDB_ID.NULL Then
          m_bEnableUpdateObjInObjTree = False
-         If Not SelectIdInObjTree(nOldId, True) Then
+         If Not MySelectIdInObjTree(nOldId) Then
             Map.refInfoExpanderVM.SetInfoBox(String.Empty)
          End If
          m_bEnableUpdateObjInObjTree = True
@@ -803,14 +805,11 @@ Public Class ManageLayerExpanderVM
       Return nOldId
    End Function
 
-   Private Function SelectIdInObjTree(nId As Integer, bMark As Boolean) As Boolean
+   Private Function MySelectIdInObjTree(nId As Integer) As Boolean
       Dim tNode As LayerTreeViewItem = SearchIdInLayerList(LayerList, nId, True)
       If Not IsNothing(tNode) Then
-         If Not bMark Then LayerTreeViewItem.m_MarkOnSel = False
          tNode.IsSelected = True
          tNode.NotifyPropertyChanged("IsSelected")
-         If Not bMark Then LayerTreeViewItem.m_MarkOnSel = True
-         tNode.IsExpanded = True
          m_nObjTreeOldId = nId
          Return True
       Else

OptionPanel/MachiningOptionPanel/MachiningsTreeViewExpander/MachiningTreeExpanderVM.vb

@@ -152,6 +152,8 @@ Public Class MachiningTreeExpanderVM
             Return EgtMsg(MSG_MACHININGSDBPAGE + 12)
          Case MCH_MY.FIVEAXISMILLING
             Return EgtMsg(31213)
+         Case MCH_MY.PROBING
+            Return EgtMsg(31220)
          Case Else
             Return "Mach"
       End Select

OptionPanel/MachiningOptionPanel/OperationExpander/DispositionParameterExpander/DispositionParameterExpanderVM.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.ComponentModel
+Imports System.Globalization
+Imports EgtUILib
 
 Public Class DispositionParameterExpanderVM
    Inherits ViewModelBase
@@ -311,12 +313,16 @@ Public Class DispositionParameterExpanderVM
          ' se movimento di traslazione
          If m_MoveIsChecked Then
             Dim InputPoint As New Point3d(0, 0, 0)
+            Dim dSupp As Double = -1
             Dim Values() As String = m_InputValue.Split(","c)
-            If Values.Count = 2 Then
+            If Values.Count >= 2 Then
                StringToLen(Values(0), InputPoint.x)
                StringToLen(Values(1), InputPoint.y)
+               If Values.Count >= 3 Then
+                  StringToLen(Values(2), dSupp)
+               End If
             Else
-               m_InputErrorMsg = "Il valore non è una cordinata XY"
+               m_InputErrorMsg = "Il valore non è un punto X,Y"
                OnPropertyChanged("InputErrorMsg")
                Return
             End If
@@ -329,13 +335,44 @@ Public Class DispositionParameterExpanderVM
                ' imposto il riferimento della tavola
                Dim ptTableRef As Point3d
                EgtGetTableRef(1, ptTableRef)
-               ' calcolo il punto del grezzo da posizionar nelle coordinate di input
+               ' calcolo il punto del grezzo da posizionare nelle coordinate di input
                Dim ptRawRefPoint As Point3d = DispositionUtility.GetRawPartRefPoint(nFirstSelectedId, m_RawRefPosition)
                ' creo un punto con le coordinate di input espresse rispetto alla tavola
                Dim TableRefInputPoint As New Point3d(InputPoint)
                TableRefInputPoint.LocToLoc(EgtGetGridFrame(), New Frame3d(ptTableRef))
                ' calcolo il vettore di spostamento del grezzo
                vtMove = TableRefInputPoint - ptRawRefPoint
+               vtMove.z = 0
+               ' verifico ed aggiusto eventuale supporto
+               Dim dOldSupp As Double = 0
+               Dim nOldSuppId As Integer = EgtGetFirstNameInGroup(nFirstSelectedId, SUPPORT)
+               If nOldSuppId <> GDB_ID.NULL Then
+                  Dim bboxSupport As New BBox3d
+                  EgtGetBBoxGlob(nOldSuppId, GDB_BB.STANDARD, bboxSupport)
+                  dOldSupp = bboxSupport.DimZ()
+               End If
+               If dSupp > -EPS_SMALL AndAlso Math.Abs( dSupp - dOldSupp) > EPS_SMALL Then
+                  ' da cancellare
+                  If dSupp < EPS_SMALL Then
+                     EgtErase( nOldSuppId)
+                     vtMove.z = dSupp - dOldSupp
+                  ' da creare o modificare
+                  Else
+                     EgtErase( nOldSuppId)
+                     Dim nNewSuppId As Integer = GDB_ID.NULL
+                     Dim nRawOutLnId As Integer = EgtGetFirstNameInGroup(nFirstSelectedId, RAWOUTLINE)
+                     If nRawOutLnId <> GDB_ID.NULL Then
+                        Dim vtExtr As New Vector3d( 0, 0, -dSupp)
+                        nNewSuppId = EgtCreateSurfTmByRegionExtrusion( nFirstSelectedId, 1, {nRawOutLnId}, vtExtr, 0.05, GDB_RT.GLOB)
+                     End If
+                     If nNewSuppId <> GDB_ID.NULL Then
+                        EgtSetName( nNewSuppId, SUPPORT)
+                        EgtSetColor( nNewSuppId, New Color3d(150, 75, 0))
+                        If nOldSuppId <> GDB_ID.NULL Then EgtChangeId( nNewSuppId, nOldSuppId)
+                        vtMove.z = dSupp - dOldSupp
+                     End If
+                  End If
+               End If
             ' se è una ventosa
             ElseIf EgtVerifyFixture(nFirstSelectedId) Then
                Dim SelObjFrame3d As New Frame3d(Frame3d.GLOB)
@@ -434,8 +471,24 @@ Public Class DispositionParameterExpanderVM
    ''' Execute the Point.  This method is invoked by the DoneCommand.
    ''' </summary>
    Public Sub CheckedRawRef(ByVal param As Object)
+      ' Assegno corner di riferimento
       Dim nRawRef As MCH_CR = DirectCast(param, MCH_CR)
       m_RawRefPosition = nRawRef
+      ' Se grezzo selezionato, visualizzo sua posizione
+      Dim nFirstSelectedId As Integer = EgtGetFirstSelectedObj()
+      If EgtVerifyRawPartCurrPhase(nFirstSelectedId) Then
+         Dim ptR As Point3d = DispositionUtility.GetRawPartRefPoint(nFirstSelectedId, m_RawRefPosition)
+         Dim sSupp As String = ""
+         Dim nSuppId As Integer = EgtGetFirstNameInGroup(nFirstSelectedId, SUPPORT)
+         If nSuppId <> GDB_ID.NULL Then
+            Dim bboxSupport As New BBox3d
+            EgtGetBBoxGlob(nSuppId, GDB_BB.STANDARD, bboxSupport)
+            Dim dSupp As Double = bboxSupport.DimZ()
+            sSupp = "," & LenToString( dSupp, 2)
+         End If
+         m_InputValue = LenToString( ptR.x, 2) & "," & LenToString( ptR.y, 2) & sSupp
+         OnPropertyChanged( "InputValue")
+End If
    End Sub
 
 #End Region ' CheckedRawRefCommand

OptionPanel/MachiningOptionPanel/OperationExpander/DispositionParameterExpander/DispositionUtility.vb

@@ -1,5 +1,4 @@
-Imports System.Windows.Forms.AxHost
-Imports EgtUILib
+Imports EgtUILib
 Imports Microsoft.VisualBasic.ApplicationServices
 
 Public NotInheritable Class DispositionUtility
@@ -323,11 +322,11 @@ Public NotInheritable Class DispositionUtility
                      Dim dFixtureHeight As Double = 0
                      EgtGetInfo(nFixtureId, "H", dFixtureHeight)
                      ' recupero altezza grezzo riferita alla tavola
-                     Dim dRawPartMin As Point3d = bboxRawPart.Min
-                     dRawPartMin.ToLoc(TableFrame)
+                     Dim ptRawPartMin As Point3d = bboxRawPart.Min
+                     ptRawPartMin.ToLoc(TableFrame)
                      ' se l'altezza grezzo è minore di quella della ventosa, lo sposto alla stessa altezza
-                     If dRawPartMin.z < dFixtureHeight - EPS_SMALL Then
-                        Dim vtMove As New Vector3d(0, 0, dFixtureHeight - dRawPartMin.z)
+                     If ptRawPartMin.z < dFixtureHeight - EPS_SMALL Then
+                        Dim vtMove As New Vector3d(0, 0, dFixtureHeight - ptRawPartMin.z)
                         EgtMoveRawPart(nRawPartId, vtMove)
                         ' ricalcolo il BBox del solido del grezzo per averlo aggiornato con la nuova Z
                         EgtGetBBoxGlob(nRawSolidId, GDB_BB.ONLY_VISIBLE, bboxRawPart)
@@ -359,19 +358,19 @@ Public NotInheritable Class DispositionUtility
                         nOtherFixtureId = EgtGetNextFixture(nOtherFixtureId)
                      End While
                      ' recupero altezza grezzo riferita alla tavola
-                     Dim dRawPartMin As Point3d = bboxRawPart.Min
-                     dRawPartMin.ToLoc(TableFrame)
+                     Dim ptRawPartMin As Point3d = bboxRawPart.Min
+                     ptRawPartMin.ToLoc(TableFrame)
                      ' se non ci sono ventose sotto il grezzo
                      If Not bIsFixtureUnderRawPart Then
                         ' verifico che il grezzo sia ad altezza tavola
-                        If dRawPartMin.z <> 0 Then
-                           Dim vtMove As New Vector3d(0, 0, -dRawPartMin.z)
+                        If ptRawPartMin.z <> 0 Then
+                           Dim vtMove As New Vector3d(0, 0, -ptRawPartMin.z)
                            EgtMoveRawPart(nRawPartId, vtMove)
                         End If
                      Else
                         ' se ci sono verifico che l'altezza del grezzo sia quella della ventosa più alta
-                        If Math.Abs(dRawPartMin.z - dMaxFixtureHeight) > EPS_SMALL Then
-                           Dim vtMove As New Vector3d(0, 0, dMaxFixtureHeight - dRawPartMin.z)
+                        If Math.Abs(ptRawPartMin.z - dMaxFixtureHeight) > EPS_SMALL Then
+                           Dim vtMove As New Vector3d(0, 0, dMaxFixtureHeight - ptRawPartMin.z)
                            EgtMoveRawPart(nRawPartId, vtMove)
                         End If
                      End If
@@ -473,23 +472,30 @@ Public NotInheritable Class DispositionUtility
       ' Recupero il solido del grezzo
       Dim nMovedRawSolidId As Integer = EgtGetFirstNameInGroup(nRawId, RAWSOLID)
       ' definisco il box del solido del grezzo
-      Dim bboxRawPartId As New BBox3d
-      EgtGetBBoxGlob(nMovedRawSolidId, GDB_BB.ONLY_VISIBLE, bboxRawPartId)
+      Dim bboxRawPart As New BBox3d
+      EgtGetBBoxGlob(nMovedRawSolidId, GDB_BB.STANDARD, bboxRawPart)
+      ' aggiungo il box dell'eventuale supporto o sottopezzo
+      Dim nSupportId As Integer = EgtGetFirstNameInGroup(nRawId, SUPPORT)
+      If nSupportId <> GDB_ID.NULL Then
+         Dim bboxSupport As New BBox3d
+         EgtGetBBoxGlob(nSupportId, GDB_BB.STANDARD, bboxSupport)
+         bboxRawPart.Add( bboxSupport)
+      End If
       ' Variabile che dice se c'è almeno una ventosa sotto il grezzo
       Dim bIsFixtureUnderRawPart As Boolean = False
       Dim bboxFixture As New BBox3d
       ' variabile che contiene la massima altezza delle ventose sottostanti
       Dim dMaxFixtureHeight As Double = 0
       ' recupero altezza grezzo riferita alla tavola
-      Dim dRawPartMin As Point3d = bboxRawPartId.Min
-      dRawPartMin.ToLoc(TableFrame)
+      Dim ptRawPartMin As Point3d = bboxRawPart.Min
+      ptRawPartMin.ToLoc(TableFrame)
       ' Ciclo sui sottopezzi presenti per verificare le collisioni con il grezzo
       Dim nFixtureId As Integer = EgtGetFirstFixture()
       While nFixtureId <> GDB_ID.NULL
          ' calcolo il BBox del sottopezzo
          EgtGetBBoxGlob(nFixtureId, GDB_BB.ONLY_VISIBLE, bboxFixture)
          ' verifico se c'è sovrapposizione
-         If bboxRawPartId.OverlapsXY(bboxFixture) Then 
+         If bboxRawPart.OverlapsXY(bboxFixture) Then 
             ' recupero il tipo di fixture         
             Dim nFxtType As FIX_TYPE = FixtureType(nFixtureId)
             ' Se è ventosa o morsa
@@ -502,22 +508,22 @@ Public NotInheritable Class DispositionUtility
                   dMaxFixtureHeight = dFixtureHeight
                End If
                ' se l'altezza grezzo è diversa da quella della ventosa, lo sposto alla stessa altezza
-               If dRawPartMin.z < dFixtureHeight - EPS_SMALL Then
-                  Dim vtMove As New Vector3d(0, 0, dFixtureHeight - dRawPartMin.z)
+               If ptRawPartMin.z < dFixtureHeight - EPS_SMALL Then
+                  Dim vtMove As New Vector3d(0, 0, dFixtureHeight - ptRawPartMin.z)
                   EgtMoveRawPart(nRawId, vtMove)
                   ' recupero il solido del grezzo
                   Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(nRawId, RAWSOLID)
                   ' ricalcolo il BBox del solido del grezzo per averlo aggiornato con la nuova Z
-                  EgtGetBBoxGlob(nRawSolidId, GDB_BB.ONLY_VISIBLE, bboxRawPartId)
-                  dRawPartMin = bboxRawPartId.Min
-                  dRawPartMin.ToLoc(TableFrame)
+                  EgtGetBBoxGlob(nRawSolidId, GDB_BB.ONLY_VISIBLE, bboxRawPart)
+                  ptRawPartMin = bboxRawPart.Min
+                  ptRawPartMin.ToLoc(TableFrame)
                End If
                bIsFixtureUnderRawPart = True
             End If
             ' Se è morsa
             If nFxtType = FIX_TYPE.VISE Then
                ' regolo la posizione in Z della morsa
-               EgtSetFixtureMobile( nFixtureId, bboxRawPartId.DimZ())
+               EgtSetFixtureMobile( nFixtureId, bboxRawPart.DimZ())
             End If
             ' Se è un riferimento o una morsa
             If nFxtType = FIX_TYPE.REFERENCE Or nFxtType = FIX_TYPE.VISE Then
@@ -526,7 +532,7 @@ Public NotInheritable Class DispositionUtility
                ' calcolo bbox dell'arco di riferimento
                Dim bboxArcRef As New BBox3d
                EgtGetBBoxGlob(arcRefId, GDB_BB.STANDARD, bboxArcRef)
-               If bboxRawPartId.OverlapsXY(bboxArcRef) Then
+               If bboxRawPart.OverlapsXY(bboxArcRef) Then
                   ' recupero contorno del grezzo
                   Dim ccompoRawPartOutlineId As Integer = EgtGetFirstNameInGroup(nRawId, RAWOUTLINE)
                   'recupero il raggio dell'arco di riferimento
@@ -588,14 +594,14 @@ Public NotInheritable Class DispositionUtility
       ' se non ci sono ventose sotto il grezzo
       If Not bIsFixtureUnderRawPart Then
          ' verifico che il grezzo sia ad altezza tavola
-         If dRawPartMin.z <> 0 Then
-            Dim vtMove As New Vector3d(0, 0, -dRawPartMin.z)
+         If ptRawPartMin.z <> 0 Then
+            Dim vtMove As New Vector3d(0, 0, -ptRawPartMin.z)
             EgtMoveRawPart(nRawId, vtMove)
          End If
       Else
          ' se ci sono verifico che l'altezza del grezzo sia quella della ventosa più alta
-         If Math.Abs(dRawPartMin.z - dMaxFixtureHeight) > EPS_SMALL Then
-            Dim vtMove As New Vector3d(0, 0, dMaxFixtureHeight - dRawPartMin.z)
+         If Math.Abs(ptRawPartMin.z - dMaxFixtureHeight) > EPS_SMALL Then
+            Dim vtMove As New Vector3d(0, 0, dMaxFixtureHeight - ptRawPartMin.z)
             EgtMoveRawPart(nRawId, vtMove)
          End If
       End If

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/BeamMillingParameterExpanderV.xaml

@@ -238,6 +238,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/ChiselingParameterExpanderV.xaml

@@ -226,6 +226,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/FiveAxisMachinigParameterExpanderV.xaml

@@ -1,4 +1,4 @@
-<UserControl x:Class="FiveAxisMachinigParameterExpanderV"
+<UserControl x:Class="FiveAxisMachiningParameterExpanderV"
              xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
              xmlns:sys="clr-namespace:System;assembly=mscorlib"
@@ -216,6 +216,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/FiveAxisMachinigParameterExpanderV.xaml.vb

@@ -1,6 +1,6 @@
 Imports EgtWPFLib5.EgtFloating
 
-Public Class FiveAxisMachinigParameterExpanderV
+Public Class FiveAxisMachiningParameterExpanderV
 
    Private m_RightTrayV As RightTrayV
    Private EgtFloatingPanel As EgtFloatingPanel

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/GenMachiningParameterExpanderV.xaml

@@ -216,6 +216,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/MachiningParameterExpanderVM.vb

@@ -152,8 +152,9 @@ Public Class MachiningParameterExpanderVM
    Dim StoneDrillParamExpanderV As StoneDrillingParameterExpanderV
    Dim SurfFinishParamExpanderV As SurfFinishingParameterExpanderV
    Dim WjParamExpanderV As WaterjettingParameterExpanderV
-   Dim FiveAxExpanderV As FiveAxisMachinigParameterExpanderV
+   Dim FiveAxExpanderV As FiveAxisMachiningParameterExpanderV
    Dim SurfRoughExpanderV As SurfRoughingParameterExpanderV
+   Dim ProbExpanderV As ProbingParameterExpanderV
 
    Private Sub Dummy()
 
@@ -270,13 +271,17 @@ Public Class MachiningParameterExpanderVM
                WjParamExpanderV.DataContext = m_CurrOperation
                Return WjParamExpanderV
             Case MCH_OY.FIVEAXISMILLING
-               If IsNothing(FiveAxExpanderV) Then FiveAxExpanderV = New FiveAxisMachinigParameterExpanderV
+               If IsNothing(FiveAxExpanderV) Then FiveAxExpanderV = New FiveAxisMachiningParameterExpanderV
                FiveAxExpanderV.DataContext = m_CurrOperation
                Return FiveAxExpanderV
             Case MCH_OY.SURFROUGHING
                If IsNothing(SurfRoughExpanderV) Then SurfRoughExpanderV = New SurfRoughingParameterExpanderV
                SurfRoughExpanderV.DataContext = m_CurrOperation
                Return SurfRoughExpanderV
+            Case MCH_OY.PROBING
+               If IsNothing(ProbExpanderV) Then ProbExpanderV = New ProbingParameterExpanderV
+               ProbExpanderV.DataContext = m_CurrOperation
+               Return ProbExpanderV
          End Select
 
          'MachiningParameterExpanderItem.ReadOperationParam()
@@ -371,21 +376,12 @@ Public Class MachiningParameterExpanderVM
          Return
       End If
 
-      Dim bRecalc As Boolean = False
-      If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
-         bRecalc = True
-      Else
-         ' Controllo se il tipo e' dr o sr o lr bRecalc e' true come quando viene selezionato Shift
-         For Each ItemNote As NoteListBoxItem In m_CurrOperation.NotesList
-            bRecalc = ItemNote.Type.Equals("dr") OrElse ItemNote.Type.Equals("lr") OrElse ItemNote.Type.Equals("sr") OrElse ItemNote.Type.Equals("br")
-            If bRecalc Then Exit For
-         Next
-      End If
+      ' Verifico se forzato ricalcolo da interfaccia
+      Dim bRecalc As Boolean = ((Keyboard.Modifiers And ModifierKeys.Shift) <> 0)
 
-      ' La modifica di alcuni parametri forza il ricalcolo della geometria
-      Dim ModifiedGeometry As Boolean = m_CurrOperation.m_IsModifiedSelectedFaceUseType
-      ' aggiorno valori modificati
+      ' Aggiorno parametri di lavorazione
       m_CurrOperation.WriteOperationParam()
+
       ' Carico tutta la geometria selezionata in una lista
       Dim SelectedGeometry As New List(Of Integer)
       Dim EntityIndex As Integer = EgtGetFirstSelectedObj()
@@ -398,49 +394,19 @@ Public Class MachiningParameterExpanderVM
          (EgtGetType(SelectedGeometry(0)) = GDB_TY.SRF_MESH Or EgtGetType(SelectedGeometry(0)) = GDB_TY.SRF_FRGN) Then
          ' Aggiorno lista speciale con facce
          SelData.VerifyIdSub()
-         ' Verifico se geometria cambiata, confrontando selezione attuale con facet con geometria di lavorazione
-         Dim nInd As Integer = 0
-         Dim nMchId, nMchSub As Integer
-         EgtGetMachiningGeometry(nInd, nMchId, nMchSub)
-         Dim nSelId, nSelSub As Integer
-         SelData.GetIdSub(nInd, nSelId, nSelSub)
-         While Not ModifiedGeometry And (nMchId <> GDB_ID.NULL Or nSelId <> GDB_ID.NULL)
-            ' Controllo uguaglianza
-            If nMchId <> nSelId Or nMchSub <> nSelSub Then ModifiedGeometry = True
-            ' Passo al successivo
-            nInd += 1
-            EgtGetMachiningGeometry(nInd, nMchId, nMchSub)
-            SelData.GetIdSub(nInd, nSelId, nSelSub)
-         End While
-         If ModifiedGeometry Then
-            Dim vId() As Integer = Nothing
-            Dim vSub() As Integer = Nothing
-            SelData.GetAllIdSub(vId, vSub)
-            EgtSetMachiningGeometry(vId, vSub)
-         End If
-         ' Gestione standard per altre entità (curve, testi, ...)
+         ' Imposto geometria
+         Dim vId() As Integer = Nothing
+         Dim vSub() As Integer = Nothing
+         SelData.GetAllIdSub(vId, vSub)
+         EgtSetMachiningGeometry(vId, vSub)
+      ' Gestione standard per altre entità (curve, testi, ...)
       Else
-         ' Verifico se geometria cambiata, confrontando selezione attuale con geometria di lavorazione
-         Dim nInd As Integer = 0
-         Dim nMchId, nMchSub As Integer
-         EgtGetMachiningGeometry(nInd, nMchId, nMchSub)
-         Dim nSelId As Integer
-         nSelId = If(nInd < SelectedGeometry.Count(), SelectedGeometry(nInd), GDB_ID.NULL)
-         While Not ModifiedGeometry And (nMchId <> GDB_ID.NULL Or nSelId <> GDB_ID.NULL)
-            ' Controllo uguaglianza
-            If nMchId <> nSelId Then ModifiedGeometry = True
-            ' Passo al successivo
-            nInd += 1
-            EgtGetMachiningGeometry(nInd, nMchId, nMchSub)
-            nSelId = If(nInd < SelectedGeometry.Count(), SelectedGeometry(nInd), GDB_ID.NULL)
-         End While
-         ' Imposto geometria selezionata come geometria di lavorazione
-         If ModifiedGeometry Then
-            EgtSetMachiningGeometry(SelectedGeometry.ToArray)
-         End If
+         ' Imposto geometria
+         EgtSetMachiningGeometry(SelectedGeometry.ToArray)
       End If
-      ' Ricalcolo la lavorazione
-      If Not EgtApplyMachining(bRecalc Or ModifiedGeometry) Then
+
+      ' Rigenero la lavorazione
+      If Not EgtApplyMachining(bRecalc) Then
          If EgtGetLastMachMgrErrorId() <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
             Dim sInfo As String = String.Empty
@@ -459,6 +425,7 @@ Public Class MachiningParameterExpanderVM
             Map.refStatusBarVM.NotifyStatusOutput("")
          End If
       End If
+
       ' Restart visualizzazione utensile
       SetSliderScale( EgtGetPreviewMachiningToolStepCount())
       SetViewTool(True)

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/MortisingParameterExpanderV.xaml

@@ -234,6 +234,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/PocketingParameterExpanderV.xaml

@@ -243,6 +243,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/ProbingParameterExpanderV.xaml

@@ -0,0 +1,275 @@
+<UserControl x:Class="ProbingParameterExpanderV"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:sys="clr-namespace:System;assembly=mscorlib"
+             xmlns:Interactivity="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
+             xmlns:EgtCAM5="clr-namespace:EgtCAM5"
+             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5">
+   
+   <UserControl.Resources>
+      <EgtCAM5:OperationParamVisibilityConverter x:Key="OperationParamVisibilityConverter"/>
+      <EgtCAM5:DepthUnitConverter x:Key="DepthUnitConverter"/>
+      <sys:Int32 x:Key="Invert">0</sys:Int32>
+      <sys:Int32 x:Key="LeaveTab">1</sys:Int32>
+      <sys:Int32 x:Key="WorkSide">2</sys:Int32>
+      <sys:Int32 x:Key="HeadSide">3</sys:Int32>
+      <sys:Int32 x:Key="LeadInType">4</sys:Int32>
+      <sys:Int32 x:Key="ExtLinkType">5</sys:Int32>
+      <sys:Int32 x:Key="LeadOutType">6</sys:Int32>
+      <sys:Int32 x:Key="CurveUse">7</sys:Int32>
+      <sys:Int32 x:Key="StepType">8</sys:Int32>
+      <sys:Int32 x:Key="LeadLinkType">9</sys:Int32>
+      <sys:Int32 x:Key="Speed">10</sys:Int32>
+      <sys:Int32 x:Key="Feed">11</sys:Int32>
+      <sys:Int32 x:Key="StartFeed">12</sys:Int32>
+      <sys:Int32 x:Key="EndFeed">13</sys:Int32>
+      <sys:Int32 x:Key="TipFeed">14</sys:Int32>
+      <sys:Int32 x:Key="OffSr">15</sys:Int32>
+      <sys:Int32 x:Key="OffSl">16</sys:Int32>
+      <sys:Int32 x:Key="SideAngle">17</sys:Int32>
+      <sys:Int32 x:Key="Approx">18</sys:Int32>
+      <sys:Int32 x:Key="StartPos">19</sys:Int32>
+      <sys:Int32 x:Key="StartSlowLen">20</sys:Int32>
+      <sys:Int32 x:Key="EndSlowLen">21</sys:Int32>
+      <sys:Int32 x:Key="ThrouAddLen">22</sys:Int32>
+      <sys:Int32 x:Key="StepPar">23</sys:Int32>
+      <sys:Int32 x:Key="ReturnPos">24</sys:Int32>
+      <sys:Int32 x:Key="TabLen">25</sys:Int32>
+      <sys:Int32 x:Key="TabDist">26</sys:Int32>
+      <sys:Int32 x:Key="TabHeight">27</sys:Int32>
+      <sys:Int32 x:Key="TabAngle">28</sys:Int32>
+      <sys:Int32 x:Key="LiTang">29</sys:Int32>
+      <sys:Int32 x:Key="LiPerp">30</sys:Int32>
+      <sys:Int32 x:Key="LiElev">31</sys:Int32>
+      <sys:Int32 x:Key="LiCompLen">32</sys:Int32>
+      <sys:Int32 x:Key="LoTang">33</sys:Int32>
+      <sys:Int32 x:Key="LoPerp">34</sys:Int32>
+      <sys:Int32 x:Key="LoElev">35</sys:Int32>
+      <sys:Int32 x:Key="LoCompLen">36</sys:Int32>
+      <sys:Int32 x:Key="StartAddLen">37</sys:Int32>
+      <sys:Int32 x:Key="EndAddLen">38</sys:Int32>
+      <sys:Int32 x:Key="StepExtArc">39</sys:Int32>
+      <sys:Int32 x:Key="StepIntArc">40</sys:Int32>
+      <sys:Int32 x:Key="SideStep">41</sys:Int32>
+      <sys:Int32 x:Key="VertFeed">42</sys:Int32>
+      <sys:Int32 x:Key="NamePar">43</sys:Int32>
+      <sys:Int32 x:Key="Tool">44</sys:Int32>
+      <sys:Int32 x:Key="DepthStr">45</sys:Int32>
+      <sys:Int32 x:Key="UserNotes">46</sys:Int32>
+      <sys:Int32 x:Key="OverLapStr">47</sys:Int32>
+      <sys:Int32 x:Key="OffsetStr">48</sys:Int32>
+      <sys:Int32 x:Key="SubType">49</sys:Int32>
+      <sys:Int32 x:Key="SolChoiceType">50</sys:Int32>
+      <sys:Int32 x:Key="AxRotRef">51</sys:Int32>
+      <sys:Int32 x:Key="BlockedAxesRef">52</sys:Int32>
+      <sys:Int32 x:Key="FaceUseType">53</sys:Int32>
+      <sys:Int32 x:Key="InvertToolDir">54</sys:Int32>
+      <sys:Int32 x:Key="ExpanderLeadIn">55</sys:Int32>
+      <sys:Int32 x:Key="ExpanderLeadOut">56</sys:Int32>
+      <sys:Int32 x:Key="ApproxGen">57</sys:Int32>
+      <sys:Int32 x:Key="OscEnable">58</sys:Int32>
+      <sys:Int32 x:Key="OscHeight">59</sys:Int32>
+      <sys:Int32 x:Key="OscRampLen">60</sys:Int32>
+      <sys:Int32 x:Key="OscFlatLen">61</sys:Int32>
+   </UserControl.Resources>
+
+   <StackPanel Name="OperationParametersStackPanel">
+      <StackPanel Name="OperationFirstParametersStackPanel">
+         <UniformGrid Columns="2">
+            <TextBlock Text="{Binding DepthStrTxBl}" Style="{DynamicResource MPExpander_DepthTxBlMargin}"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding DepthStr, UpdateSourceTrigger=PropertyChanged,
+                                                  Converter={StaticResource DepthUnitConverter}}"
+                                   Style="{DynamicResource MPExpander_DepthTxBxMargin}"/>
+         </UniformGrid>
+         <EgtWPFLib5:CheckParamV ParamTxBl="{Binding InvertTxBl}" 
+                                 ParamChBx="{Binding Path=Invert,
+                                                     UpdateSourceTrigger=PropertyChanged,
+                                                     ValidatesOnDataErrors=True}" 
+                                 Style="{DynamicResource CheckParamV_Margin}"/>
+         <UniformGrid Columns="2">
+            <TextBlock Text="{Binding UserNotesTxBl}" 
+                       Style="{DynamicResource MPExpander_UserNotesTxBlMargin}"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding UserNotes, UpdateSourceTrigger=PropertyChanged}" 
+                                   Style="{DynamicResource MPExpander_UserNotesTxBxMargin}">
+               <EgtWPFLib5:EgtTextBox.ToolTip>
+                  <TextBlock Text="{Binding UserNotesTooltip}"/>
+               </EgtWPFLib5:EgtTextBox.ToolTip>
+            </EgtWPFLib5:EgtTextBox>
+            <TextBlock Text="{Binding SystemNotesTxBl}" 
+                       Style="{DynamicResource MPExpander_UserNotesTxBlMargin}"
+                       Visibility="{Binding SysNotes_Visibility}"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding SystemNotes, UpdateSourceTrigger=PropertyChanged}" 
+                                   Style="{DynamicResource MPExpander_UserNotesTxBxMargin}"
+                                   Visibility="{Binding SysNotes_Visibility}"
+                                   IsReadOnly="True"/>
+         </UniformGrid>
+      </StackPanel>
+      <StackPanel Name="AutomaticCloseExpanderStackPanel">
+         <Expander Header="{Binding GenericExpanderHeader}" Name="GenericExpander"
+                   Style="{StaticResource ExpanderStyle}" Margin="0,1,0,1">
+            <StackPanel>
+               <EgtWPFLib5:StringParamV ParamTxBl="{Binding StartPosTxBl}" 
+                                        ParamTxBx="{Binding Path=StartPos,
+                                                            UpdateSourceTrigger=PropertyChanged,
+                                                            ValidatesOnDataErrors=True}" 
+                                        Style="{DynamicResource StringParamV_Margin}"/>
+               <EgtWPFLib5:ComboParamV ParamTxBl="{Binding SubTypeTxBl}" 
+                                       ParamCmBxList="{Binding Path=SubTypeList,
+                                                               UpdateSourceTrigger=PropertyChanged,
+                                                               ValidatesOnDataErrors=True}"
+                                       ParamCmBxSelIndex="{Binding Path=SelectedSubType}" 
+                                       Style="{DynamicResource ComboParamV_Margin}"/>
+            </StackPanel>
+         </Expander>
+
+         <Expander Name="AdvancedParam" IsExpanded="{Binding AdvancedParamIsExpander}"
+                   Style="{StaticResource ExpanderStyle}" Margin="0,1,0,1">
+            <Expander.Header>
+               <UniformGrid Columns="2">
+                  <TextBlock Text="{Binding AdvancedParamMsg}"
+                             Margin="2.5"/>
+                  <Button Command="{Binding ShowNoteListComboCommand}"
+                          ToolTip="{Binding ShowNoteToolTip}"
+                          IsEnabled="{Binding ShowNoteListCombo_IsEnable}"
+                          Visibility="{Binding ShowNoteListCombo_Visibility}"
+                          Grid.Column="1"
+                          HorizontalAlignment="Right"
+                          Margin="2.5,2.5,7,2.5"
+                          Width="20">
+                     <Image Source="/Resources/Note/+.png" Stretch="Uniform"/>
+                  </Button>
+               </UniformGrid>
+            </Expander.Header>
+            <Grid>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="Auto"/>
+               </Grid.RowDefinitions>
+               <StackPanel>
+                  <EgtWPFLib5:CheckParamV ParamTxBl="{Binding InvertToolDirTxBl}" 
+                                          ParamChBx="{Binding Path=InvertToolDir,
+                                                              UpdateSourceTrigger=PropertyChanged,
+                                                              ValidatesOnDataErrors=True}" 
+                                          Style="{DynamicResource CheckParamV_Margin}"/>
+                  <EgtWPFLib5:StringParamV ParamTxBl="{Binding InitAngsTxBl}" 
+                                           ParamTxBx="{Binding Path=InitAngs,
+                                                               UpdateSourceTrigger=PropertyChanged,
+                                                               ValidatesOnDataErrors=True}" 
+                                           Style="{DynamicResource StringParamV_Margin}"/>
+                  <EgtWPFLib5:StringParamV ParamTxBl="{Binding BlockedAxisTxBl}" 
+                                           ParamTxBx="{Binding Path=BlockedAxis,
+                                                               UpdateSourceTrigger=PropertyChanged,
+                                                               ValidatesOnDataErrors=True}" 
+                                           Style="{DynamicResource StringParamV_Margin}"/>
+                  <EgtWPFLib5:ComboParamV ParamTxBl="{Binding SolChoiceTypeTxBl}" 
+                                          ParamCmBxList="{Binding Path=SolChoiceTypeList,
+                                                                  UpdateSourceTrigger=PropertyChanged,
+                                                                  ValidatesOnDataErrors=True,
+                                                                  Mode=OneWay}"
+                                          ParamCmBxSelIndex="{Binding Path=SelectedSolChoiceType}"
+                                          Style="{DynamicResource ComboParamV_Margin}"/>
+               </StackPanel>
+               <Grid Grid.Row="1" Margin="0,5,0,0">
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="1*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="1*"/>
+                     <RowDefinition Height="Auto"/>
+                  </Grid.RowDefinitions>
+                  <ItemsControl ItemsSource="{Binding NotesList}">
+                     <ItemsControl.ItemTemplate>
+                        <DataTemplate>
+                           <Grid>
+                              <Grid.ColumnDefinitions>
+                                 <ColumnDefinition Width="Auto"/>
+                                 <ColumnDefinition Width="1*"/>
+                                 <ColumnDefinition Width="Auto"/>
+                              </Grid.ColumnDefinitions>
+                              <TextBlock Text="{Binding Description}"
+                                         Margin="0,5.5,29,0"
+                                         Width="82"
+                                         Style="{DynamicResource MPExpander_UserNotesTxBlMargin}"/>
+                              <TabControl SelectedIndex="{Binding SelTypeValue}"
+                                          Grid.Column="1"
+                                          Background="Transparent"
+                                          BorderBrush="Transparent">
+                                 <TabControl.ItemContainerStyle>
+                                    <Style TargetType="{x:Type TabItem}">
+                                       <Setter Property="Visibility" Value="Collapsed"/>
+                                    </Style>
+                                 </TabControl.ItemContainerStyle>
+                                 <TabItem Header="TEXT">
+                                    <TextBox Text="{Binding Value, UpdateSourceTrigger=PropertyChanged}"
+                                             IsReadOnly="False"/>
+                                 </TabItem>
+                                 <TabItem Header="CHECKBOX">
+                                    <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
+                                 </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
+                              </TabControl>
+                              <Button Command="{Binding RemoveItemNoteCommand}"
+                                      Grid.Column="2"
+                                      Width="20"
+                                      Height="20"
+                                      Margin="5,0,0,0">
+                                 <Image Source="/Resources/Note/-.png" Stretch="Uniform"/>
+                              </Button>
+                           </Grid>
+                        </DataTemplate>
+                     </ItemsControl.ItemTemplate>
+                  </ItemsControl>
+                  <ComboBox ItemsSource="{Binding NotesListCombo}"
+                            SelectedItem="{Binding SelNoteItemCombo}"
+                            Grid.Row="1"
+                            Grid.ColumnSpan="1"
+                            Visibility="{Binding ComboAddVisibility}">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Description}"
+                                      Margin="2.5"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+               </Grid>
+            </Grid>
+         </Expander>
+
+         <Expander Style="{StaticResource ExpanderStyle}">
+            <Expander.Header>
+               <TextBlock Text="{Binding ToolExpanderHeader}"/>
+            </Expander.Header>
+            <StackPanel>
+               <EgtWPFLib5:StringParamV ParamTxBl="{Binding FeedTxBl}" 
+                                        ParamTxBx="{Binding Path=Feed,
+                                                            UpdateSourceTrigger=PropertyChanged,
+                                                            ValidatesOnDataErrors=True}" 
+                                        Style="{DynamicResource StringParamV_Margin}"/>
+               <EgtWPFLib5:StringParamV ParamTxBl="{Binding TipFeedTxBl}" 
+                                        ParamTxBx="{Binding Path=TipFeed,
+                                                            UpdateSourceTrigger=PropertyChanged,
+                                                            ValidatesOnDataErrors=True}" 
+                                        Style="{DynamicResource StringParamV_Margin}"/>
+               <EgtWPFLib5:StringParamV ParamTxBl="{Binding StartFeedTxBl}" 
+                                        ParamTxBx="{Binding Path=StartFeed,
+                                                            UpdateSourceTrigger=PropertyChanged,
+                                                            ValidatesOnDataErrors=True}" 
+                                        Style="{DynamicResource StringParamV_Margin}"/>
+               <EgtWPFLib5:StringParamV ParamTxBl="{Binding EndFeedTxBl}" 
+                                        ParamTxBx="{Binding Path=EndFeed,
+                                                            UpdateSourceTrigger=PropertyChanged,
+                                                            ValidatesOnDataErrors=True}" 
+                                        Style="{DynamicResource StringParamV_Margin}"/>
+            </StackPanel>
+         </Expander>
+         <Interactivity:Interaction.Behaviors>
+            <EgtCAM5:AutomaticCloseExpander/>
+         </Interactivity:Interaction.Behaviors>
+      </StackPanel>
+   </StackPanel>
+
+</UserControl>

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/ProbingParameterExpanderV.xaml.vb

@@ -0,0 +1,83 @@
+Imports EgtWPFLib5.EgtFloating
+
+Public Class ProbingParameterExpanderV
+
+   Private m_RightTrayV As RightTrayV
+   Private EgtFloatingPanel As EgtFloatingPanel
+
+   Private m_bFirst As Boolean = True
+
+   Private Sub OperationExpanderView_Loaded(sender As Object, e As System.Windows.RoutedEventArgs) Handles Me.Loaded
+      If m_bFirst Then
+         m_RightTrayV = FindAncestor(Of RightTrayV)(Me)
+         EgtFloatingPanel = FindAncestor(Of EgtFloatingPanel)(Me)
+         AddHandler m_RightTrayV.SizeChanged, AddressOf RightTrayV_SizeChanged
+         PanelHeight = EgtFloatingPanel.DesiredSize.Height
+         Me.AutomaticCloseExpanderStackPanelHeight = AutomaticCloseExpanderStackPanel.ActualHeight
+         m_bFirst = False
+      End If
+      CalculateOperationParametersStackPanelMaxHeight()
+   End Sub
+
+   Dim m_bSizeChanging As Boolean = False
+
+   Private Sub RightTrayV_SizeChanged(sender As Object, e As System.Windows.SizeChangedEventArgs)
+      If m_bSizeChanging Then Return
+      m_bSizeChanging = True
+      CalculateOperationParametersStackPanelMaxHeight()
+      m_bSizeChanging = False
+   End Sub
+
+   Dim PanelHeight As Double = 0
+   Dim AutomaticCloseExpanderStackPanelHeight As Double = 0
+
+   ' ricalcola spazio utilizzabile quando modificata dimensione finestra e quindi dimensione della tray
+   Private Sub CalculateOperationParametersStackPanelMaxHeight()
+      Dim AutomaticCloseExpanderStackPanelHeight As Double = 0
+      Dim OpenedExpanderList As New List(Of Boolean)
+      For Index = 0 To AutomaticCloseExpanderStackPanel.Children.Count - 1
+         If TypeOf AutomaticCloseExpanderStackPanel.Children(Index) Is Expander Then
+            Dim IndexedExpander As Expander = DirectCast(AutomaticCloseExpanderStackPanel.Children(Index), Expander)
+            If IndexedExpander.IsExpanded Then
+               OpenedExpanderList.Add(True)
+               IndexedExpander.IsExpanded = False
+               Dim CurrExpanderContent As FrameworkElement = DirectCast(IndexedExpander.Content, FrameworkElement)
+               CurrExpanderContent.Measure(New Size(Double.PositiveInfinity, Double.PositiveInfinity))
+               AutomaticCloseExpanderStackPanelHeight -= CurrExpanderContent.DesiredSize.Height
+               ' Sottraggo anche i padding
+               AutomaticCloseExpanderStackPanelHeight -= (IndexedExpander.Padding.Top + IndexedExpander.Padding.Bottom)
+            Else
+               OpenedExpanderList.Add(False)
+            End If
+         Else
+            OpenedExpanderList.Add(False)
+         End If
+      Next
+      Dim RemainingHeight As Double = m_RightTrayV.ActualHeight - PanelHeight
+      AutomaticCloseExpanderStackPanel.MaxHeight = Me.AutomaticCloseExpanderStackPanelHeight + RemainingHeight
+      For Index = AutomaticCloseExpanderStackPanel.Children.Count - 1 To 0 Step -1
+         If TypeOf AutomaticCloseExpanderStackPanel.Children(Index) Is Expander Then
+            Dim IndexedExpander As Expander = DirectCast(AutomaticCloseExpanderStackPanel.Children(Index), Expander)
+            If OpenedExpanderList(Index) Then
+               IndexedExpander.IsExpanded = True
+            End If
+         End If
+      Next
+   End Sub
+
+   ' Funzione che permette di trovare il primo contenitore di tipo T di un elemento grafico dependencyObject 
+   Public Function FindAncestor(Of T As Class)(dependencyObject As DependencyObject) As T
+      Dim target As DependencyObject = dependencyObject
+      Do
+         target = LogicalTreeHelper.GetParent(target)
+      Loop While target IsNot Nothing AndAlso Not (TypeOf target Is T)
+      If IsNothing(target) Then
+         target = dependencyObject
+         Do
+            target = VisualTreeHelper.GetParent(target)
+         Loop While target IsNot Nothing AndAlso Not (TypeOf target Is T)
+      End If
+      Return TryCast(target, T)
+   End Function
+
+End Class

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/StoneDrillingParameterExpanderV.xaml

@@ -215,6 +215,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/StoneMillingParameterExpanderV.xaml

@@ -219,6 +219,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/StoneSawFinishingParameterExpanderV.xaml

@@ -213,6 +213,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/StoneSawRoughingParameterExpanderV.xaml

@@ -124,10 +124,10 @@
                                                             ValidatesOnDataErrors=True}"
                                         Style="{DynamicResource StringParamV_Margin}"/>
                <EgtWPFLib5:ComboParamV ParamTxBl="{Binding ExtLinkTypeTxBl}" 
-                                       ParamCmBxList="{Binding Path=ExtLinkTypeList,
+                                       ParamCmBxList="{Binding Path=LeadLinkTypeList,
                                                                UpdateSourceTrigger=PropertyChanged,
                                                                ValidatesOnDataErrors=True}"
-                                       ParamCmBxSelIndex="{Binding Path=SelectedExtLinkType}" 
+                                       ParamCmBxSelIndex="{Binding Path=SelectedLeadLinkType}" 
                                        Style="{DynamicResource ComboParamV_Margin}"/>
             </StackPanel>
          </Expander>
@@ -211,6 +211,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/StoneSawingParameterExpanderV.xaml

@@ -219,6 +219,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/SurfFinishingParameterExpanderV.xaml

@@ -226,6 +226,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/SurfRoughingParameterExpanderV.xaml

@@ -236,6 +236,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/WaterjettingParameterExpanderV.xaml

@@ -201,6 +201,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/WoodDrillingParameterExpanderV.xaml

@@ -220,6 +220,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/WoodMillingParameterExpanderV.xaml

@@ -238,6 +238,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/WoodSawingParameterExpanderV.xaml

@@ -228,6 +228,11 @@
                                  <TabItem Header="CHECKBOX">
                                     <CheckBox IsChecked="{Binding Value, UpdateSourceTrigger=PropertyChanged}"/>
                                  </TabItem>
+                                 <TabItem Header="COMBOBOX">
+                                    <ComboBox ItemsSource="{Binding ListKeyValue}"
+                                              SelectedItem="{Binding SelKeyValue, UpdateSourceTrigger=PropertyChanged}"                                              
+                                              DisplayMemberPath="KeyValue"/>
+                                 </TabItem>
                               </TabControl>
                               <Button Command="{Binding RemoveItemNoteCommand}"
                                       Grid.Column="2"

OptionPanel/MachiningOptionPanel/OperationExpander/OperationListBoxItem/DispositionOpListBoxItem.vb

@@ -28,6 +28,31 @@ Public Class DispositionOpListBoxItem
       End Set
    End Property
 
+   Public Property OnOffAll As Boolean?
+      Get
+         Dim OpIndexes As List(Of Integer) = GetOpIndexes()
+         ' Ritorno il valore specificato in base agli stati delle operazioni di cui abbiamo raccolto gli indici
+         If OpIndexes.Count = 0 Then Return False
+         Dim bTemp As Boolean = DirectCast(Map.refOperationsListExpanderVM.OperationList.Item(OpIndexes(0)), MachiningOpListBoxItem).OnOff
+         For OpInDispIndex = 1 To OpIndexes.Count - 1
+            If DirectCast(Map.refOperationsListExpanderVM.OperationList.Item(OpIndexes(OpInDispIndex)), MachiningOpListBoxItem).OnOff <> bTemp Then Return Nothing
+         Next
+         Return bTemp
+      End Get
+      Set(value As Boolean?)
+         ' Recupero gli indici delle operazioni della Disposizione corrente
+         Dim OpIndexes As List(Of Integer) = GetOpIndexes()
+         If OpIndexes.Count = 0 Then
+            NotifyPropertyChanged(NameOf(OnOffAll))
+            Return
+         End If
+         For Each OpInDispIndex In OpIndexes
+            DirectCast(Map.refOperationsListExpanderVM.OperationList.Item(OpInDispIndex), MachiningOpListBoxItem).OnOff = If(IsNothing(value), False, CBool(value))
+         Next
+      End Set
+   End Property
+
+
    Private m_Image As String = String.Empty
    Public Property Image As String
       Get

OptionPanel/MachiningOptionPanel/OperationExpander/OperationListBoxItem/MachiningOpListBoxItem.vb

@@ -1,5 +1,4 @@
-Imports System.ComponentModel
-Imports System.Collections.ObjectModel
+Imports System.Collections.ObjectModel
 Imports EgtUILib
 
 Public Class MachiningOpListBoxItem
@@ -126,6 +125,31 @@ Public Class MachiningOpListBoxItem
       End Get
    End Property
 
+
+   Private m_bOnOff As Boolean = True
+   Public Property OnOff As Boolean
+      Get
+         Return m_bOnOff
+      End Get
+      Set(value As Boolean)
+         If m_bOnOff <> value Then
+            m_bOnOff = value
+            Dim bOldEnMod As Boolean = EgtGetEnableModified()
+            EgtDisableModified()
+            ' se abilitato, eseguo operazione
+            Dim status As Integer = GDB_ST.OFF
+            If value Then
+               status = GDB_ST.ON_
+            End If
+            ModifyStatusLamp()
+            EgtSetStatus(Id, status)
+            If bOldEnMod Then EgtEnableModified()
+            EgtDraw()
+         End If
+         NotifyPropertyChanged(NameOf(OnOff))
+      End Set
+   End Property
+
    ' Definizione comandi
    Private m_cmdModifyNameEnter As ICommand
    Private m_cmdModifyNameEsc As ICommand
@@ -177,6 +201,21 @@ Public Class MachiningOpListBoxItem
       End Select
    End Function
 
+   Private Sub ModifyStatusLamp()
+      ' Recupero l'indice dell'operazione a cui abbiamo appena modificato lo Status e l'indice della Disposizione che la contiene
+      Dim DispIndex As Integer = 0
+      Dim OpIndex As Integer = 0
+      For Each OpItem In Map.refOperationsListExpanderVM.OperationList
+         If EgtGetOperationType(OpItem.Id) = MCH_OY.DISP Then DispIndex = OpIndex
+         If OpItem.Id = Id Then
+            Exit For
+         End If
+         OpIndex += 1
+      Next
+      ' Notifico StatusAll per calcolare lo stato della CheckBox della Disposizione
+      Map.refOperationsListExpanderVM.OperationList(DispIndex).NotifyPropertyChanged(NameOf(DispositionOpListBoxItem.OnOffAll))
+   End Sub
+
 #Region "COMMANDS"
 
 #Region "ModifyNameEnterCommand"

OptionPanel/MachiningOptionPanel/OperationExpander/OperationListBoxItem/OperationListBoxItem.vb

@@ -74,7 +74,7 @@ Public Class OperationListBoxItem
                Map.refOperationsListExpanderVM.OnPropertyChanged("MoveDown_IsEnabled")
                NotifyPropertyChanged("IsSelected")
                ' Aggiorno visualizzazione
-               EgtDraw()
+               If Map.refOperationsListExpanderVM.ForceDrawInIsSelected Then EgtDraw()
                Return
             End If
             ' Imposto la fase di lavorazione corrente
@@ -124,7 +124,7 @@ Public Class OperationListBoxItem
                Map.refMachiningTreeExpanderVM.nSelectedOperationId = Me.Id
             End If
             ' Aggiorno visualizzazione
-            EgtDraw()
+            If Map.refOperationsListExpanderVM.ForceDrawInIsSelected Then EgtDraw()
          End If
          ' Resetto valori slider
          If Not IsNothing(Map.refMachiningParameterExpanderVM) Then

OptionPanel/MachiningOptionPanel/OperationParametersExpander/OperationParametersExpanderVM.vb

@@ -177,6 +177,8 @@ Public Class OperationParametersExpanderVM
                Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomWaterJetting
             Case MCH_OY.FIVEAXISMILLING
                Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomFiveAxMilling
+            Case MCH_OY.PROBING
+               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomProbing
          End Select
          ' Imposto visualizzazione utensile
          Map.refMachiningParameterExpanderVM.SetViewTool( True)

OptionPanel/MachiningOptionPanel/OperationsListExpander/OperationsListExpanderV.xaml

@@ -43,6 +43,7 @@
                         </Border.InputBindings>
                         <Grid Style="{StaticResource LayoutRoot}">
                            <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="Auto"/>
                               <ColumnDefinition Width="Auto"/>
                               <ColumnDefinition Width="Auto"/>
                               <ColumnDefinition Width="1*"/>
@@ -50,9 +51,12 @@
                            </Grid.ColumnDefinitions>
                            <CheckBox IsChecked="{Binding Status}" Margin="0,0,5,0"/>
                            <Image Source="{Binding Image}" Height="15" Margin="0,0,5,0"/>
-                           <TextBlock Grid.Column="1" Text="{Binding Name}"
+                           <ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}" Grid.Column="1" 
+                                         IsChecked="{Binding OnOff}" Visibility="{Binding IsHidden}" Focusable="True" Height="15" Width="15" Margin="0,0,5,0"/>
+
+                           <TextBlock Grid.Column="2" Text="{Binding Name}"
                                       Visibility="{Binding Name_Visibility}" Margin="0,0,5,0"/>
-                           <TextBox Grid.Column="1" Text="{Binding ModifiedName, UpdateSourceTrigger=PropertyChanged}"
+                           <TextBox Grid.Column="2" Text="{Binding ModifiedName, UpdateSourceTrigger=PropertyChanged}"
                                     Width="150"
                                     x:Name="Box"
                                     Visibility="{Binding ModifyName_Visibility}" Margin="0,0,5,0">
@@ -63,7 +67,7 @@
                                  <KeyBinding Key="Escape" Command="{Binding ModifyNameEscCommand}"/>
                               </TextBox.InputBindings>
                            </TextBox>
-                           <TextBlock Grid.Column="2" Text="{Binding Info}"/>
+                           <TextBlock Grid.Column="3" Text="{Binding Info}"/>
                         </Grid>
                      </Border>
                   </DataTemplate>
@@ -76,6 +80,9 @@
                         </Border.InputBindings>
                         <StackPanel Orientation="Horizontal">
                            <CheckBox IsChecked="{Binding StatusAll}" VerticalAlignment="Center" Margin="0,0,5,0"/>
+                           <CheckBox IsChecked="{Binding OnOffAll}" VerticalAlignment="Center" Margin="0,0,5,0"/>
+                           <!--<ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}"
+                                         IsChecked="{Binding OnOffAll}" Visibility="{Binding IsHidden}" Focusable="True" Height="15" Width="15" Margin="0,0,5,0"/>-->
                            <Image Source="{Binding Image}" Height="15" Margin="0,0,5,0"/>
                            <TextBlock Text="{Binding Name}" Foreground="White"
                         FontSize="15" FontWeight="SemiBold"/>

OptionPanel/MachiningOptionPanel/OperationsListExpander/OperationsListExpanderVM.vb

@@ -84,6 +84,7 @@ Public Class OperationsListExpanderVM
       Set(value As Boolean)
          If value <> m_ListIsExpanded Then
             Map.refMachiningOptionPanelVM.Set_IsExpanded(MachiningOptionPanelVM.MachiningOptionPanelExpander.OPERATIONLIST, value)
+            SetStatusOnLamp()
          End If
       End Set
    End Property
@@ -111,6 +112,37 @@ Public Class OperationsListExpanderVM
       End Set
    End Property
 
+   Private m_tmpOperationList As New ObservableCollection(Of MachiningOpListBoxItem)
+   Public Property tmpOperationList As ObservableCollection(Of MachiningOpListBoxItem)
+      Get
+         Return m_tmpOperationList
+      End Get
+      Set(value As ObservableCollection(Of MachiningOpListBoxItem))
+         m_tmpOperationList = value
+      End Set
+   End Property
+
+   Private m_StatusLampList As New ObservableCollection(Of StatusLamp)
+   Public Property StatusLampList As ObservableCollection(Of StatusLamp)
+      Get
+         Return m_StatusLampList
+      End Get
+      Set(value As ObservableCollection(Of StatusLamp))
+         m_StatusLampList = value
+      End Set
+   End Property
+
+   ' Forza il disegno quando seleziono la lampadina
+   Private m_ForceDrawInIsSelected As Boolean = True
+   Public Property ForceDrawInIsSelected As Boolean
+      Get
+         Return m_ForceDrawInIsSelected
+      End Get
+      Set(value As Boolean)
+         m_ForceDrawInIsSelected = value
+      End Set
+   End Property
+
    Public ReadOnly Property DuplicateCmd_IsEnabled As Boolean
       Get
          Dim SelType As Integer = MCH_OY.NONE
@@ -258,7 +290,7 @@ Public Class OperationsListExpanderVM
 #Region "CONSTRUCTOR"
 
    Sub New()
-      m_bMoveThroughDisps = ( GetPrivateProfileInt( S_MACH, K_MOVETHROUGHDISPS, 0) <> 0)
+      m_bMoveThroughDisps = (GetPrivateProfileInt(S_MACH, K_MOVETHROUGHDISPS, 0) <> 0)
       ' Creo riferimento a questa classe in Map
       Map.SetRefOperationsListExpanderVM(Me)
       Me.ListIsExpanded = True
@@ -333,7 +365,7 @@ Public Class OperationsListExpanderVM
       For Each nId As Integer In vRawId
          EgtKeepRawPart(nId, nLastPhase)
       Next
-      EgtKeepAllDispAxes( nLastPhase)
+      EgtKeepAllDispAxes(nLastPhase)
       For Each nId As Integer In vFxtId
          EgtKeepFixture(nId, nLastPhase)
       Next
@@ -435,7 +467,7 @@ Public Class OperationsListExpanderVM
       If EgtGetOperationMode(selOperation.Id) Then
          Map.refOperationParametersExpanderVM.ParametersIsExpanded = True
          If EgtGetOperationType(selOperation.Id) <> MCH_OY.DISP Then
-            Map.refMachiningParameterExpanderVM.SetSliderScale( EgtGetPreviewMachiningToolStepCount())
+            Map.refMachiningParameterExpanderVM.SetSliderScale(EgtGetPreviewMachiningToolStepCount())
             Map.refMachiningParameterExpanderVM.ResetSliderValue()
          End If
       End If
@@ -462,55 +494,55 @@ Public Class OperationsListExpanderVM
    ''' </summary>
    Public Sub MoveUp()
       ' Verifico il numero di elementi selezionati
-      Dim indexes As New List( Of Integer)()
+      Dim indexes As New List(Of Integer)()
       For index As Integer = 0 To OperationList.Count - 1
          ' Verifico gli elementi selezionati
-         If OperationList.Item( index).IsSelected Then
+         If OperationList.Item(index).IsSelected Then
             ' Se presente una disposizione esco
-            If EgtGetOperationType( OperationList.Item( index).Id) = MCH_OY.DISP Then Return
+            If EgtGetOperationType(OperationList.Item(index).Id) = MCH_OY.DISP Then Return
             ' Aggiungo l'operazione
-            indexes.Add( index)
+            indexes.Add(index)
          End If
       Next
       Dim lenIndexes As Integer = indexes.Count
       ' Recupero Id ultima entità selezionata e precedente a quelle selezionate
-      Dim LastSelectedId As Integer = OperationList( indexes( lenIndexes - 1)).Id
-      Dim PreviousId As Integer = OperationList( indexes( 0) - 1).Id
+      Dim LastSelectedId As Integer = OperationList(indexes(lenIndexes - 1)).Id
+      Dim PreviousId As Integer = OperationList(indexes(0) - 1).Id
       ' Sposto l'operazione precedente a quelle selezionate nell'ambiente Egt
-      If EgtRelocate( PreviousId, LastSelectedId, GDB_POS.AFTER) Then
+      If EgtRelocate(PreviousId, LastSelectedId, GDB_POS.AFTER) Then
          ' Sposto l'operazione precedente a quelle selezionate nella grafica
-         OperationList.Move( indexes(0) - 1, indexes( lenIndexes - 1)) ' + 1)
+         OperationList.Move(indexes(0) - 1, indexes(lenIndexes - 1)) ' + 1)
          ' Ricalcolo le lavorazioni selezionate e quella che era precedente (e ora è seguente)
          If Not m_bMoveThroughDisps Then
             For index As Integer = 0 To indexes.Count - 1
-               EgtSetCurrMachining( OperationList( indexes( index)).Id)
-               EgtApplyMachining( False)
+               EgtSetCurrMachining(OperationList(indexes(index)).Id)
+               EgtApplyMachining(False)
             Next
-            EgtSetCurrMachining( PreviousId)
-            EgtApplyMachining( False)
+            EgtSetCurrMachining(PreviousId)
+            EgtApplyMachining(False)
             EgtDraw()
-            OnPropertyChanged( "MoveUp_IsEnabled")
-            OnPropertyChanged( "MoveDown_IsEnabled")
+            OnPropertyChanged("MoveUp_IsEnabled")
+            OnPropertyChanged("MoveDown_IsEnabled")
             Map.refProjectVM.EmitTitle()
          Else
             Dim nCurrPhase As Integer = EgtGetOperationPhase(LastSelectedId)
             For index As Integer = 0 To indexes.Count - 1
-               Dim nOpeId As Integer = OperationList( indexes( index) - 1).Id
-               If EgtGetOperationType( nOpeId) <> MCH_OY.DISP Then
-                  EgtAdjustOperationPhase( nOpeId)
-                  EgtSetCurrMachining( nOpeId)
-                  EgtApplyMachining( False)
+               Dim nOpeId As Integer = OperationList(indexes(index) - 1).Id
+               If EgtGetOperationType(nOpeId) <> MCH_OY.DISP Then
+                  EgtAdjustOperationPhase(nOpeId)
+                  EgtSetCurrMachining(nOpeId)
+                  EgtApplyMachining(False)
                End If
             Next
-            If EgtGetOperationType( PreviousId) <> MCH_OY.DISP Then
-               EgtSetCurrMachining( PreviousId)
-               EgtApplyMachining( False)
+            If EgtGetOperationType(PreviousId) <> MCH_OY.DISP Then
+               EgtSetCurrMachining(PreviousId)
+               EgtApplyMachining(False)
             End If
             Dim nNewPhase As Integer = EgtGetOperationPhase(LastSelectedId)
-            If nNewPhase <> nCurrPhase Then EgtSetCurrPhase( nNewPhase)
+            If nNewPhase <> nCurrPhase Then EgtSetCurrPhase(nNewPhase)
             EgtDraw()
-            OnPropertyChanged( NameOf(MoveUp_IsEnabled))
-            OnPropertyChanged( NameOf(MoveDown_IsEnabled))
+            OnPropertyChanged(NameOf(MoveUp_IsEnabled))
+            OnPropertyChanged(NameOf(MoveDown_IsEnabled))
             Map.refProjectVM.EmitTitle()
          End If
       End If
@@ -537,52 +569,52 @@ Public Class OperationsListExpanderVM
    ''' </summary>
    Public Sub MoveDown()
       ' Verifico il numero di elementi selezionati
-      Dim indexes As New List( Of Integer)()
+      Dim indexes As New List(Of Integer)()
       For index As Integer = 0 To OperationList.Count - 1
          ' Verifico gli elementi selezionati
-         If OperationList.Item( index).IsSelected Then
+         If OperationList.Item(index).IsSelected Then
             ' Se presente una disposizione esco
-            If EgtGetOperationType( OperationList.Item( index).Id) = MCH_OY.DISP Then Return
+            If EgtGetOperationType(OperationList.Item(index).Id) = MCH_OY.DISP Then Return
             ' Aggiungo l'operazione
-            indexes.Add( index)
+            indexes.Add(index)
          End If
       Next
       Dim lenIndexes As Integer = indexes.Count
       ' Recupero Id prima entità selezionata e successiva a quelle selezionate
-      Dim FirstSelectedId As Integer = OperationList( indexes( 0)).Id
-      Dim NextId As Integer = OperationList( indexes( lenIndexes - 1) + 1).Id
+      Dim FirstSelectedId As Integer = OperationList(indexes(0)).Id
+      Dim NextId As Integer = OperationList(indexes(lenIndexes - 1) + 1).Id
       ' Sposto l'operazione successiva a quelle selezionate nell'ambiente Egt
-      If EgtRelocate( NextId, FirstSelectedId, GDB_POS.BEFORE) Then
+      If EgtRelocate(NextId, FirstSelectedId, GDB_POS.BEFORE) Then
          ' Sposto l'operazione successiva a quelle selezionate nella grafica
-         OperationList.Move( indexes( lenIndexes - 1) + 1, indexes( 0))
+         OperationList.Move(indexes(lenIndexes - 1) + 1, indexes(0))
          ' Ricalcolo la lavorazioni selezionate e quella che era seguente (e ora è precedente)
          If Not m_bMoveThroughDisps Then
-            EgtSetCurrMachining( NextId)
-            EgtApplyMachining( False)
+            EgtSetCurrMachining(NextId)
+            EgtApplyMachining(False)
             For index As Integer = 0 To indexes.Count - 1
-               EgtSetCurrMachining( OperationList( indexes( index)).Id)
-               EgtApplyMachining( False)
+               EgtSetCurrMachining(OperationList(indexes(index)).Id)
+               EgtApplyMachining(False)
             Next
             EgtDraw()
-            OnPropertyChanged( "MoveUp_IsEnabled")
-            OnPropertyChanged( "MoveDown_IsEnabled")
+            OnPropertyChanged("MoveUp_IsEnabled")
+            OnPropertyChanged("MoveDown_IsEnabled")
             Map.refProjectVM.EmitTitle()
          Else
-            If EgtGetOperationType( NextId) <> MCH_OY.DISP Then
-               EgtSetCurrMachining( NextId)
-               EgtApplyMachining( False)
+            If EgtGetOperationType(NextId) <> MCH_OY.DISP Then
+               EgtSetCurrMachining(NextId)
+               EgtApplyMachining(False)
             End If
             For index As Integer = 0 To indexes.Count - 1
-               Dim nOpeId As Integer = OperationList( indexes( index) + 1).Id
-               If EgtGetOperationType( nOpeId) <> MCH_OY.DISP Then
-                  EgtAdjustOperationPhase( nOpeId)
-                  EgtSetCurrMachining( nOpeId)
-                  EgtApplyMachining( False)
+               Dim nOpeId As Integer = OperationList(indexes(index) + 1).Id
+               If EgtGetOperationType(nOpeId) <> MCH_OY.DISP Then
+                  EgtAdjustOperationPhase(nOpeId)
+                  EgtSetCurrMachining(nOpeId)
+                  EgtApplyMachining(False)
                End If
             Next
             EgtDraw()
-            OnPropertyChanged( NameOf( MoveUp_IsEnabled))
-            OnPropertyChanged( NameOf( MoveDown_IsEnabled))
+            OnPropertyChanged(NameOf(MoveUp_IsEnabled))
+            OnPropertyChanged(NameOf(MoveDown_IsEnabled))
             Map.refProjectVM.EmitTitle()
          End If
       End If
@@ -608,6 +640,8 @@ Public Class OperationsListExpanderVM
    ''' Execute the Point.  This method is invoked by the PointCommand.
    ''' </summary>
    Public Sub Update()
+      Dim tmpStatusLamp As New StatusLamp()
+      Map.refOperationsListExpanderVM.StatusLampList = tmpStatusLamp.LoadStatusLamp()
       ' Cursore di attesa
       Application.Current.MainWindow.ForceCursor = True
       Application.Current.MainWindow.Cursor = Cursors.Wait
@@ -617,6 +651,7 @@ Public Class OperationsListExpanderVM
       Dim bOk As Boolean = EgtApplyAllMachinings(bRecalc, False, sErr)
       EgtSetModified()
       ' Deseleziono l'Operazione selezionata e la de-evidenzio nel Disegno
+      m_ForceDrawInIsSelected = False
       For Each Operation In OperationList
          If Operation.IsSelected Then
             Operation.IsSelected = False
@@ -624,6 +659,9 @@ Public Class OperationsListExpanderVM
       Next
       ' Ricarico la lista delle Operazioni
       LoadOperationList(GDB_ID.NULL)
+      ' Rimetto le lampadine in modo corretto
+      tmpStatusLamp.UpdateStatusLamp()
+      m_ForceDrawInIsSelected = True
       ' Aggiorno visualizzazione e ritorno a cursore standard
       EgtDraw()
       Application.Current.MainWindow.ForceCursor = False
@@ -633,7 +671,8 @@ Public Class OperationsListExpanderVM
          If Not String.IsNullOrEmpty(sErr) Then
             MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
          Else
-            MessageBox.Show(EgtMsg(MSG_SIMULATION + 6), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
+            ' Errore nell'aggiornamento delle lavorazioni!
+            MessageBox.Show(EgtMsg(5346), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
          End If
       Else
          Map.refStatusBarVM.NotifyStatusOutput(EgtMsg(MSG_OPERATION + 11))
@@ -999,7 +1038,9 @@ Public Class OperationsListExpanderVM
 
    Private Sub LoadOperationList()
       OperationList.Clear()
+      tmpOperationList.Clear()
       Dim Id As Integer
+      Dim OpStatusOnOff As Integer
       Dim OpStatus As Boolean = True
       Dim OpName As String = String.Empty
       Dim OpType As Integer = 0
@@ -1012,9 +1053,14 @@ Public Class OperationsListExpanderVM
          If IsValidMachiningType(OpType) Then
             EgtSetCurrMachining(Id)
             OpStatus = EgtGetOperationMode(Id)
+            EgtGetStatus(Id, OpStatusOnOff)
             EgtGetMachiningParam(MCH_MP.TOOL, OpTool)
             EgtGetMachiningParam(MCH_MP.NAME, OpMach)
-            OperationList.Add(New MachiningOpListBoxItem(Id, OpStatus, OpName, OpType, OpTool, OpMach))
+            ' Dichiarato per far si che le due liste operino in contemporaneo
+            Dim local_MachiningOpListBoxItem As New MachiningOpListBoxItem(Id, OpStatus, OpName, OpType, OpTool, OpMach)
+            OperationList.Add(local_MachiningOpListBoxItem)
+            ' Lista creata per lavorare solo su le operazioni di macchina, utilizzata per la gestione dello spegnimento e accensione delle lamp
+            tmpOperationList.Add(local_MachiningOpListBoxItem)
          ElseIf IsValidDispositionType(OpType) Then
             OpStatus = True
             OpTool = String.Empty
@@ -1256,7 +1302,7 @@ Public Class OperationsListExpanderVM
       If m_NewMachining Then EndNewMachining(GDB_ID.NULL)
       ' Disabilito visualizzazione utensile
       If Not IsNothing(m_MachiningParameterExpander) Then
-         Map.refMachiningParameterExpanderVM.SetViewTool( False)
+         Map.refMachiningParameterExpanderVM.SetViewTool(False)
       End If
       ' Deseleziono le operazioni correnti per eliminare il mark
       For Each Operation In OperationList
@@ -1266,6 +1312,83 @@ Public Class OperationsListExpanderVM
       Next
    End Sub
 
+   Private Sub SetStatusOnLamp()
+      If Not IsNothing(m_tmpOperationList) Then
+         For Each ItemOp As MachiningOpListBoxItem In m_tmpOperationList
+            If Not ItemOp.OnOff Then
+               EgtSetStatus(ItemOp.Id, GDB_ST.OFF)
+            End If
+         Next
+      End If
+      EgtDraw()
+   End Sub
+
+#End Region    ' Methods
+
+End Class
+
+Public Class StatusLamp
+
+#Region "FIELDS & PROPERTIES"
+
+   Private m_nId As Integer
+   Public Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+      Set(value As Integer)
+         m_nId = value
+      End Set
+   End Property
+
+   Private m_bStatusLamp As Boolean
+   Public Property bStatusLamp As Boolean
+      Get
+         Return m_bStatusLamp
+      End Get
+      Set(value As Boolean)
+         m_bStatusLamp = value
+      End Set
+   End Property
+
+#End Region    ' Fields & Properties
+
+#Region "CONSTRUCTOR"
+
+   Sub New(nId As Integer, bStatusLamp As Boolean)
+      m_nId = nId
+      m_bStatusLamp = bStatusLamp
+   End Sub
+
+   Sub New()
+
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "METHODS"
+
+   Public Function LoadStatusLamp() As ObservableCollection(Of StatusLamp)
+      Dim tmpStatusLampList As New ObservableCollection(Of StatusLamp)
+      For Each ItemOp As MachiningOpListBoxItem In Map.refOperationsListExpanderVM.tmpOperationList
+         tmpStatusLampList.Add(New StatusLamp(ItemOp.Id, ItemOp.OnOff))
+      Next
+      Return tmpStatusLampList
+   End Function
+
+   Public Sub UpdateStatusLamp()
+      Dim tmpStatusLamp As StatusLamp
+      If Not IsNothing(Map.refOperationsListExpanderVM.tmpOperationList) Then
+         For Each ItemOp As MachiningOpListBoxItem In Map.refOperationsListExpanderVM.tmpOperationList
+            tmpStatusLamp = Map.refOperationsListExpanderVM.StatusLampList.FirstOrDefault(Function(x) x.nId = ItemOp.Id)
+            If Not tmpStatusLamp.bStatusLamp Then
+               EgtSetStatus(ItemOp.Id, GDB_ST.OFF)
+               ItemOp.OnOff = False
+            End If
+         Next
+      End If
+   End Sub
+
 #End Region    ' Methods
 
 End Class

OptionPanel/MachiningOptionPanel/SimulationExpander/SimulationExpanderV.xaml

@@ -51,7 +51,14 @@
                     <TextBlock Text="{Binding VMillMsg}" Margin="5,0,0,0"/>
                 </StackPanel>
 
-                <Grid>
+               <StackPanel Orientation="Horizontal" Visibility="{Binding Trace_Visibility}"
+                           IsEnabled="{Binding Trace_IsEnabled}" Margin="10,5,10,0">
+                  <CheckBox HorizontalAlignment="Left" VerticalAlignment="Center"
+                     IsChecked="{Binding TraceActive}"/>
+                  <TextBlock Text="{Binding TraceMsg}" Margin="5,0,0,0"/>
+               </StackPanel>
+
+            <Grid>
                     <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="1*"/>
                         <ColumnDefinition Width="1*"/>

OptionPanel/MachiningOptionPanel/SimulationExpander/SimulationExpanderVM.vb

@@ -1,5 +1,4 @@
-Imports System.Collections.ObjectModel
-Imports System.IO
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
 
@@ -18,6 +17,9 @@ Public Class SimulationExpanderVM
       Set(value As Boolean)
          If value <> m_Simulation_IsExpanded Then
             Map.refMachiningOptionPanelVM.Set_IsExpanded(MachiningOptionPanelVM.MachiningOptionPanelExpander.SIMULATION, value)
+            Map.refOperationsListExpanderVM.StatusLampList.Clear()
+            Dim tmpStatusLamp As New StatusLamp()
+            Map.refOperationsListExpanderVM.StatusLampList = tmpStatusLamp.LoadStatusLamp()
          End If
       End Set
    End Property
@@ -246,7 +248,8 @@ Public Class SimulationExpanderVM
       Dim SliderVal As Double = GetPrivateProfileDouble(S_SIMUL, K_SLIDERVAL, 10)
       SliderValue = SliderVal
       ' Gestione check VMill
-      If IsKeyEnabledVirtualMilling() And EgtUILib.GetPrivateProfileInt(S_VMILL, K_VM_ENABLE, 0, m_sCurrMachIniFilePath) <> 0 Then
+      If IsKeyEnabledVirtualMilling() And
+         EgtUILib.GetPrivateProfileInt(S_VMILL, K_VM_ENABLE, 0, m_sCurrMachIniFilePath) <> 0 Then
          VMill_Visibility = Visibility.Visible
          VMill_IsEnabled = True
          Dim bVal As Boolean
@@ -259,6 +262,16 @@ Public Class SimulationExpanderVM
          VMillActive = False
          EgtEnableModified()
       End If
+      ' Gestione check Trace
+      If IniFile.GetPrivateProfileInt(S_SIMUL, K_TRACEENABLE, 0) <> 0 And
+         EgtUILib.GetPrivateProfileInt(S_TOOLTRACE, K_TT_ENABLE, 0, m_sCurrMachIniFilePath) <> 0 Then
+         Trace_Visibility = Visibility.Visible
+         Trace_IsEnabled = True
+         If TraceActive Then TraceActive = True
+      Else
+         Trace_Visibility = Visibility.Collapsed
+         Trace_IsEnabled = False
+      End If
       ' Aggiorno visualizzazione dati macchina
       ShowCncData()
       StatusMsg = EgtMsg(MSG_SIMULATION + 14)   ' HOME
@@ -363,7 +376,7 @@ Public Class SimulationExpanderVM
             End If
          Else
             ' Per evitare di ciclare rapidissimamente e consumare inutilmente CPU
-            System.Threading.Thread.Sleep(4)
+            System.Threading.Thread.Sleep(5)
          End If
          ' Costringo ad aggiornare UI
          UpdateUI()
@@ -395,6 +408,7 @@ Public Class SimulationExpanderVM
             MachineAxisList(Index).IsReadOnlyAxesValue = True
          Next
       End If
+      Trace_IsEnabled = (value = MCH_SIM_ST.UI_PAUSE OrElse value = MCH_SIM_ST.UI_STOP)
       EgtSimSetUiStatus(GetStatus())
    End Sub
 
@@ -437,14 +451,15 @@ Public Class SimulationExpanderVM
          sCncFile = Path.GetDirectoryName(sCurrFilePath) & "\" & sCncFile
       Else
          sCncFile = Path.ChangeExtension(sCurrFilePath, Nothing)
+         Dim sExt As String =  ".cnc"
+         EgtUILib.GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, sExt, sExt, IniFile.m_sCurrMachIniFilePath)
          If IniFile.m_bMachiningGroup Then
             Dim sMGrpName As String = String.Empty
             If EgtGetMachGroupName(EgtGetCurrMachGroup(), sMGrpName) Then
-               sCncFile &= "_" & sMGrpName & ".cnc"
+               sCncFile &= "_" & sMGrpName
                sInfo &= "-" & sMGrpName
             End If
-         Else
-            sCncFile &= ".cnc"
+            sCncFile = Path.ChangeExtension(sCncFile, sExt)
          End If
       End If
       Return True
@@ -453,16 +468,16 @@ Public Class SimulationExpanderVM
    Friend Sub SimulationExpander_Update_CncData( nFlag As Integer)
       If Simulation_IsExpanded Then
          ShowCncData()
-         ' Se fermo per Collisione rilevata da script Lua
-         If nFlag = 11 Then
+         ' Se fermo per Collisione rilevata da script Lua o per altra richiesta
+         If nFlag = 11 Or nFlag = 12 Then
             ' Imposto stato Pausa
             SetSimulationStatus(MCH_SIM_ST.UI_PAUSE)
             StatusMsg = EgtMsg(MSG_SIMULATION + 11)   ' PAUSA
             ' Aggiornamenti per bottone Play/Pause
             SetShowPlay(True)
             NotifyPropertyChanged("PlayPauseImage")
-            ' Dichiaro di non arrestarsi alla successiva notifica di collisione
-            m_bStopOnNextCollision = False
+            ' Se fermo per Collisione, dichiaro di non arrestarsi alla successiva notifica di collisione
+            If nFlag = 11 Then m_bStopOnNextCollision = False
          End If
       End If
    End Sub

OptionsWindow/OptionModule.vb

@@ -12,8 +12,10 @@ Friend Module OptionModule
    Friend m_GridColor As Color3d
    ' Flag per visualizzazione spessa delle linee
    Friend m_bThickLine As Boolean
-   ' Flag per visualizzazione smussata delle superfici
-   Friend m_bSmoothTriMesh As Boolean
+   ' Qualità di visualizzazione delle superfici
+   Friend m_ShowSurfQuality As SceneSurfQualityOpt
+   ' Tipo di visualizzazione delle Zmap
+   Friend m_nShowZmapType As Integer
 
    ' Colore di default in disegno
    Friend m_DefMaterialColor As Color3d
@@ -59,7 +61,9 @@ Friend Module OptionModule
    Friend m_SelGeomSurfRoughing As SceneSelModeOpt
    Friend m_SelGeomWaterJetting As SceneSelModeOpt
    Friend m_SelGeomFiveAxMilling As SceneSelModeOpt
-   Friend m_SelVMillQuality As VMillSelTypeOpt
+   Friend m_SelGeomProbing As SceneSelModeOpt
+   ' Qualità di calcolo del virtual milling
+   Friend m_VMillQuality As VMillSelTypeOpt
    ' Flag per aggiungere una nuova lavorazione alla fine della fase o subito dopo la lavorazione selezionata
    Friend m_bNewMachiningIsLastOne As Boolean
    ' Variabile che indica se usare lo script per calcolare automaticamente la disposizione quando si passa in lavorazione
@@ -110,13 +114,24 @@ Friend Module OptionModule
       ' Inizializzo flag linee ingrossate
       m_bThickLine = (GetPrivateProfileInt(S_SCENE, K_LINEWIDTH, 1) <> 1)
       ' Inizializzo flag visualizzazione smussata delle superfici
-      m_bSmoothTriMesh = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1) <> 0)
+      Dim nSSQ As Integer = GetPrivateProfileInt(S_SCENE, K_SHOWSURFQUALITY, 0)
+      m_ShowSurfQuality = DirectCast( Math.Min( Math.Max( nSSQ, -2), 2), SceneSurfQualityOpt)
+      ' Inizializzo tipo di visualizzazione Zmap
+      m_nShowZmapType = GetPrivateProfileInt(S_SCENE, K_SHOWZMAP, 9)
       ' Inizio colore di default in disegno
       Dim DefColor As New Color3d(0, 0, 0)
       GetPrivateProfileColor(S_GEOMDB, K_DEFAULTCOLOR, DefColor)
       m_DefMaterialColor = DefColor
       ' Inizializzo tolleranza geometrica
       m_dGeometryTolerance = GetPrivateProfileDouble(S_GEOMDB, K_SURFTMTOLER, 0.05)
+      ' Inizializzo stile corrente delle quotature
+      m_dExtLineLen = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_EXTLINELEN, 5)
+      m_dArrowLen = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_ARROWLEN, 5)
+      m_dTextDist = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_TEXTDIST, 2)
+      m_nLenIsMM = GetPrivateProfileInt(S_DIMENSIONSTYLE, K_LENISMM, 2)
+      m_nDecDigit = GetPrivateProfileInt(S_DIMENSIONSTYLE, K_DECDIGIT, -2)
+      m_sFont = "" : GetPrivateProfileStringUtf8(S_DIMENSIONSTYLE, K_DIMFONT, "ModernPropS.Nfe", m_sFont)
+      m_dTextHeight = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_TEXTHEIGHT, 2)
       ' Inizializzo variabili per import
       m_dDxfScaleFactor = GetPrivateProfileDouble(S_IMPORT, K_DXFSCALE, 1)
       m_dStlScaleFactor = GetPrivateProfileDouble(S_IMPORT, K_STLSCALE, 1)
@@ -154,9 +169,12 @@ Friend Module OptionModule
       m_SelGeomSurfRoughing = If(Temp < 0 Or Temp > 3, SceneSelModeOpt.PARTCURVESANDSURFACES, DirectCast(Temp, SceneSelModeOpt))
       Temp = GetPrivateProfileInt(S_MACH, K_SELGEOMFIVEAXMILLING, -1)
       m_SelGeomFiveAxMilling = If(Temp < 0 Or Temp > 3, SceneSelModeOpt.PARTCURVESANDSURFACES, DirectCast(Temp, SceneSelModeOpt))
-      Temp = GetPrivateProfileInt(S_MACH, K_SELVMILLQUALITY, 0)
-      m_SelVMillQuality = If(Temp < -2 Or Temp > 2, VMillSelTypeOpt.HIGHER, DirectCast(Temp, VMillSelTypeOpt))
+      Temp = GetPrivateProfileInt(S_MACH, K_SELGEOMPROBING, -1)
+      m_SelGeomProbing = If(Temp < 0 Or Temp > 3, SceneSelModeOpt.PARTCURVESANDSURFACES, DirectCast(Temp, SceneSelModeOpt))
       m_SelGeomWaterJetting = SceneSelModeOpt.PARTCURVES
+      ' Inizializzo qualità di virtual milling
+      Temp = GetPrivateProfileInt(S_MACH, K_VMILLQUALITY, 0)
+      m_VMillQuality = DirectCast(Math.Min( Math.Max( Temp, -2), 2), VMillSelTypeOpt)
       ' Inizializzo variabile che indica posizione nuova operazione di lavorazione
       m_bNewMachiningIsLastOne = (GetPrivateProfileInt(S_OPTIONS, K_NEWMACHININGISLASTONE, 0) <> 0)
       ' Inizializzo variabile che indica se usare script di disposizione
@@ -169,6 +187,36 @@ Friend Module OptionModule
       m_bGunstockOn = (GetPrivateProfileInt(S_GUNSTOCK, K_GUNSTOCKENABLE, 0) <> 0) 
    End Sub
 
+   ' restituisco spessore linee
+   Friend Function GetLineWidth() As Integer
+      Return If( m_bThickLine, 2, 1)
+   End Function
+
+   ' imposto stato visualizzazione superfici
+   Friend Sub SetShowSurfQuality( bRedraw As Boolean)
+      Dim bSmoothTriMesh As Boolean = True
+      Dim dSrfBezShowTol As Double = 0.2
+      Select m_ShowSurfQuality
+          Case SceneSurfQualityOpt.LOWER
+             bSmoothTriMesh = False
+             dSrfBezShowTol = 4
+          Case SceneSurfQualityOpt.LOW
+             bSmoothTriMesh = False
+             dSrfBezShowTol = 1
+          Case SceneSurfQualityOpt.STANDARD
+             bSmoothTriMesh = True
+             dSrfBezShowTol = 0.2
+          Case SceneSurfQualityOpt.HIGH
+             bSmoothTriMesh = True
+             dSrfBezShowTol = 0.05
+          Case SceneSurfQualityOpt.HIGHER
+             bSmoothTriMesh = True
+             dSrfBezShowTol = 0.01
+      End Select
+      EgtSetShowTriaAdv(bSmoothTriMesh, false)
+      EgtSetShowSurfBezierTol(dSrfBezShowTol, bRedraw)
+   End Sub
+
 End Module
 
 ' Classe che identifica una lingua del programma con nome e path del file dei messaggi

OptionsWindow/OptionWindowV.xaml

@@ -9,11 +9,12 @@
                             WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
                             IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
                             MinWidth="400" MinHeight="382"
-                            Width="400" Height="575"
+                            Width="400" Height="600"
                             CloseCommand="{Binding CloseOptionsCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}">
 
    <EgtWPFLib5:EgtCustomWindow.Resources>
       <local:GeomTypeConverter x:Key="GeomTypeConverter"/>
+      <local:SceneSurfQualityOptConverter x:Key="SceneSurfQualityOptConverter"/>
       <local:VMillTypeConverter x:Key="VMillTypeConverter"/>
    </EgtWPFLib5:EgtCustomWindow.Resources>
 
@@ -65,10 +66,17 @@
                           Grid.Row="0" Margin="0,5,0,5"/>
                <CheckBox IsChecked="{Binding ThickLine}"
                           Grid.Column="1" Grid.Row="0" Margin="22,5,0,5" VerticalAlignment="Center"/>
-               <TextBlock Text="{Binding SmoothTriMeshMsg}" VerticalAlignment="Center"
+               <TextBlock Text="{Binding SceneSurfQualityMsg}" VerticalAlignment="Center"
                           Grid.Row="1" Margin="0,5,0,5"/>
-               <CheckBox IsChecked="{Binding SmoothTriMesh}"
-                          Grid.Column="1" Grid.Row="1" Margin="22,5,0,5" VerticalAlignment="Center"/>
+               <ComboBox ItemsSource="{Binding SceneSurfQualityOptList, Mode=OneWay}"
+                         SelectedItem="{Binding SelectedSceneSurfQualityOpt}"
+                         Grid.Column="1" Grid.Row="1" Height="25" Margin="0,5,0,5">
+                  <ComboBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding Converter={StaticResource SceneSurfQualityOptConverter}}"/>
+                     </DataTemplate>
+                  </ComboBox.ItemTemplate>
+               </ComboBox>
             </Grid>
             <UniformGrid Columns="2"
                          Margin="0,0,0,5">
@@ -77,7 +85,31 @@
                          SelectedItem="{Binding SelectedTextFont}" Height="25"
                          Margin="10,5,0,0"/>
             </UniformGrid>
-            <Grid Margin="5,5,5,5">
+            <GroupBox Header="ShowZmap"
+                      Visibility="{Binding ShowZmapVisibility}"
+                      Margin="0,0,0,5">
+               <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+                  <CheckBox IsChecked="{Binding ShowZmapSurf}"
+                            Content="Surfaces" FlowDirection="RightToLeft"
+                            Grid.Row="0" Grid.Column="0" Margin="5,5,10,5" VerticalAlignment="Center"/>
+                  <CheckBox IsChecked="{Binding ShowZmapLines}"
+                            Content="Lines" FlowDirection="RightToLeft"
+                            Grid.Row="0" Grid.Column="1" Margin="5,5,10,5" VerticalAlignment="Center"/>
+                  <CheckBox IsChecked="{Binding ShowZmapNormals}"
+                            Content="Normals" FlowDirection="RightToLeft"
+                            Grid.Row="0" Grid.Column="2" Margin="5,5,10,5" VerticalAlignment="Center"/>
+                  <CheckBox IsChecked="{Binding ShowZmapBiColor}"
+                            Content="BiColor" FlowDirection="RightToLeft"
+                            Grid.Row="0" Grid.Column="3" Margin="5,5,10,5" VerticalAlignment="Center"/>
+               </Grid>
+            </GroupBox>
+            <Grid Margin="5,100,5,5">
                <Button Content="{Binding UpdateLicenceMsg}" Command="{Binding UpdateLicence_Command}"  Height="26" Margin="100,1"/>
             </Grid>
          </StackPanel>
@@ -249,6 +281,15 @@
                       Header="{Binding MachiningSelGeomMsg}"
                       Margin="5,5,5,0">
                <UniformGrid Columns="2">
+                  <TextBlock Text="{Binding GeomTypeProbingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedProbingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
                   <TextBlock Text="{Binding GeomTypeDrillingMsg}" VerticalAlignment="Center"/>
                   <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
                             SelectedItem="{Binding SelectedDrillingGeomType}" Height="25">
@@ -365,7 +406,7 @@
                <UniformGrid Columns="2" Grid.ColumnSpan="2" Margin="0,5,0,0">
                   <TextBlock Text="{Binding VMillQualityMsg}" VerticalAlignment="Center"/>
                   <ComboBox ItemsSource="{Binding VMillTypeList, Mode=OneWay}"
-                            SelectedItem="{Binding SelectedVMillTypeType}" Height="25">
+                            SelectedItem="{Binding SelectedVMillQualityType}" Height="25">
                      <ComboBox.ItemTemplate>
                         <DataTemplate>
                            <TextBlock Text="{Binding Converter={StaticResource VMillTypeConverter}}"/>
@@ -394,9 +435,9 @@
          <StackPanel>
             <Grid Margin="5,20,5,0">
                <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="3*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="3*"/>
                </Grid.ColumnDefinitions>
                <Grid.RowDefinitions>
                   <RowDefinition Height="1*"/>
@@ -405,31 +446,34 @@
                   <RowDefinition Height="1*"/>
                   <RowDefinition Height="1*"/>
                </Grid.RowDefinitions>
-               <TextBlock Text="{Binding SpecialMsg}"
-                          Grid.Row="0" Margin="0,5,0,5"/>
-               <CheckBox IsChecked="{Binding SpecialOn}"
-                         Grid.Row="0" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
                <TextBlock Text="{Binding BeamMsg}"
-                          Grid.Row="1" Grid.Column="0" Margin="0,5,0,5"/>
+                          Grid.Row="0" Grid.Column="0" Margin="0,5,0,5"/>
                <CheckBox IsChecked="{Binding BeamOn}" IsEnabled="{Binding BeamEnabled}"
-                         Grid.Row="1" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
+                         Grid.Row="0" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
                <Button Content="{Binding UpdateMsg}" IsEnabled="{Binding BeamActive}"
                        Command="{Binding UpdateBeam_Command}"
-                       Grid.Row="1" Grid.Column="2" Height="26"/>
+                       Grid.Row="0" Grid.Column="2" Height="26"/>
                <TextBlock Text="{Binding WallMsg}"
-                          Grid.Row="2" Grid.Column="0" Margin="0,5,0,5"/>
+                          Grid.Row="1" Grid.Column="0" Margin="0,5,0,5"/>
                <CheckBox IsChecked="{Binding WallOn}" IsEnabled="{Binding WallEnabled}"
-                         Grid.Row="2" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
+                         Grid.Row="1" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
                <Button Content="{Binding UpdateMsg}" IsEnabled="{Binding WallActive}"
                        Command="{Binding UpdateWall_Command}"
-                       Grid.Row="2" Grid.Column="2" Height="26"/>
+                       Grid.Row="1" Grid.Column="2" Height="26"/>
                <TextBlock Text="{Binding DoorsMsg}" VerticalAlignment="Center"
-                          Grid.Row="3" Grid.Column="0" Margin="0,5,0,5"/>
+                          Grid.Row="2" Grid.Column="0" Margin="0,5,0,5"/>
                <CheckBox IsChecked="{Binding DoorsOn}" IsEnabled="{Binding DoorsEnabled}"
-                         Grid.Row="3" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
+                         Grid.Row="2" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
+               <Button Content="{Binding UpdateMsg}" IsEnabled="{Binding DoorsActive}"
+                       Command="{Binding UpdateDoors_Command}"
+                       Grid.Row="2" Grid.Column="2" Height="26"/>
                <TextBlock Text="{Binding GunstockMsg}" VerticalAlignment="Center"
-                          Grid.Row="4" Grid.Column="0" Margin="0,5,0,5"/>
+                          Grid.Row="3" Grid.Column="0" Margin="0,5,0,5"/>
                <CheckBox IsChecked="{Binding GunstockOn}" IsEnabled="{Binding GunstockEnabled}"
+                         Grid.Row="3" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
+               <TextBlock Text="{Binding SpecialMsg}"
+                          Grid.Row="4" Margin="0,5,0,5"/>
+               <CheckBox IsChecked="{Binding SpecialOn}"
                          Grid.Row="4" Grid.Column="1"  Margin="4,5,0,5" VerticalAlignment="Center"/>
             </Grid>
          </StackPanel>

OptionsWindow/OptionWindowVM.vb

@@ -34,6 +34,13 @@ Public Class OptionWindowVM
       End Get
    End Property
 
+   Private m_SceneSurfQualityOptList As ObservableCollection(Of SceneSurfQualityOpt) = New ObservableCollection(Of SceneSurfQualityOpt)({SceneSurfQualityOpt.LOWER, SceneSurfQualityOpt.LOW, SceneSurfQualityOpt.STANDARD, SceneSurfQualityOpt.HIGH, SceneSurfQualityOpt.HIGHER})
+   Public ReadOnly Property SceneSurfQualityOptList As ObservableCollection(Of SceneSurfQualityOpt)
+      Get
+         Return m_SceneSurfQualityOptList
+      End Get
+   End Property
+
    Private m_FontList As New ObservableCollection(Of String)
    Public ReadOnly Property FontList As ObservableCollection(Of String)
       Get
@@ -98,6 +105,18 @@ Public Class OptionWindowVM
       End Set
    End Property
 
+   Public Property SelectedSceneSurfQualityOpt As SceneSurfQualityOpt
+      Get
+         Return OptionModule.m_ShowSurfQuality
+      End Get
+      Set(value As SceneSurfQualityOpt)
+         If WritePrivateProfileString(S_SCENE, K_SHOWSURFQUALITY, CInt(value).ToString()) Then
+            OptionModule.m_ShowSurfQuality = value
+            OptionModule.SetShowSurfQuality( true)
+         End If
+      End Set
+   End Property
+
    Public Property SelectedMillingGeomType As SceneSelModeOpt
       Get
          Return OptionModule.m_SelGeomMilling
@@ -158,8 +177,7 @@ Public Class OptionWindowVM
          End If
       End Set
    End Property
-
-   Public Property SelectedGenGeomType As SceneSelModeOpt
+    Public Property SelectedGenGeomType As SceneSelModeOpt
       Get
          Return OptionModule.m_SelGeomGenMachining
       End Get
@@ -169,8 +187,7 @@ Public Class OptionWindowVM
          End If
       End Set
    End Property
-
-   Public Property SelectedSurfRoughGeomType As SceneSelModeOpt
+    Public Property SelectedSurfRoughGeomType As SceneSelModeOpt
       Get
          Return OptionModule.m_SelGeomSurfRoughing
       End Get
@@ -180,7 +197,6 @@ Public Class OptionWindowVM
          End If
       End Set
    End Property
-
    Public Property SelectedSurfFinishGeomType As SceneSelModeOpt
       Get
          Return OptionModule.m_SelGeomSurfFinishing
@@ -202,7 +218,6 @@ Public Class OptionWindowVM
    '      End If
    '   End Set
    'End Property
-
    Public Property SelectedFiveAxGeomType As SceneSelModeOpt
       Get
          Return OptionModule.m_SelGeomFiveAxMilling
@@ -213,14 +228,24 @@ Public Class OptionWindowVM
          End If
       End Set
    End Property
-
-   Public Property SelectedVMillTypeType As VMillSelTypeOpt
+   Public Property SelectedProbingGeomType As SceneSelModeOpt
       Get
-         Return OptionModule.m_SelVMillQuality
+         Return OptionModule.m_SelGeomProbing
+      End Get
+      Set(value As SceneSelModeOpt)
+         If WritePrivateProfileString(S_MACH, K_SELGEOMPROBING, CInt(value).ToString()) Then
+            OptionModule.m_SelGeomProbing = value
+         End If
+      End Set
+   End Property
+
+   Public Property SelectedVMillQualityType As VMillSelTypeOpt
+      Get
+         Return OptionModule.m_VMillQuality
       End Get
       Set(value As VMillSelTypeOpt)
-         If WritePrivateProfileString(S_MACH, K_SELVMILLQUALITY, CInt(value).ToString()) Then
-            OptionModule.m_SelVMillQuality = value
+         If WritePrivateProfileString(S_MACH, K_VMILLQUALITY, CInt(value).ToString()) Then
+            OptionModule.m_VMillQuality = value
          End If
       End Set
    End Property
@@ -301,19 +326,10 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bThickLine = value
-         WritePrivateProfileString(S_SCENE, K_LINEWIDTH, If(value, "2", "1"))
-         EgtSetLineAttribs(If(value, 2, 1))
-      End Set
-   End Property
-
-   Public Property SmoothTriMesh As Boolean
-      Get
-         Return OptionModule.m_bSmoothTriMesh
-      End Get
-      Set(value As Boolean)
-         OptionModule.m_bSmoothTriMesh = value
-         WritePrivateProfileString(S_SCENE, K_SHOWTRIAADV, If(value, "1", "0"))
-         EgtSetShowTriaAdv(value)
+         Dim nThickLine As Integer = OptionModule.GetLineWidth()
+         WritePrivateProfileString(S_SCENE, K_LINEWIDTH, nThickLine.ToString())
+         EgtSetLineAttribs(nThickLine)
+         EgtDraw()
       End Set
    End Property
 
@@ -323,13 +339,68 @@ Public Class OptionWindowVM
       End Get
       Set(value As String)
          OptionModule.m_sFontText = value
-         Dim sNfeDir As String = String.Empty
-         GetPrivateProfileString(S_GEOMDB, K_NFEFONTDIR, "", sNfeDir)
-         EgtSetFont(sNfeDir, OptionModule.m_sFontText)
+         EgtSetFont("", OptionModule.m_sFontText)
          WritePrivateProfileString(S_GEOMDB, K_DEFAULTFONT, OptionModule.m_sFontText)
       End Set
    End Property
 
+   Public Property ShowZmapSurf As Boolean
+      Get
+         Return (( OptionModule.m_nShowZmapType And 1) <> 0)
+      End Get
+      Set(value As Boolean)
+         If value Then
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType Or 1)
+         Else
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType And Not 1)
+         End If
+         WritePrivateProfileString(S_SCENE, K_SHOWZMAP, OptionModule.m_nShowZmapType.ToString())
+         EgtSetShowZmap( OptionModule.m_nShowZmapType, True)
+      End Set
+   End Property
+   Public Property ShowZmapLines As Boolean
+      Get
+         Return (( OptionModule.m_nShowZmapType And 2) <> 0)
+      End Get
+      Set(value As Boolean)
+         If value Then
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType Or 2)
+         Else
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType And Not 2)
+         End If
+         WritePrivateProfileString(S_SCENE, K_SHOWZMAP, OptionModule.m_nShowZmapType.ToString())
+         EgtSetShowZmap( OptionModule.m_nShowZmapType, True)
+      End Set
+   End Property
+   Public Property ShowZmapNormals As Boolean
+      Get
+         Return (( OptionModule.m_nShowZmapType And 4) <> 0)
+      End Get
+      Set(value As Boolean)
+         If value Then
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType Or 4)
+         Else
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType And Not 4)
+         End If
+         WritePrivateProfileString(S_SCENE, K_SHOWZMAP, OptionModule.m_nShowZmapType.ToString())
+         EgtSetShowZmap( OptionModule.m_nShowZmapType, True)
+      End Set
+   End Property
+   Public Property ShowZmapBiColor As Boolean
+      Get
+         Return (( OptionModule.m_nShowZmapType And 8) <> 0)
+      End Get
+      Set(value As Boolean)
+         If value Then
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType Or 8)
+         Else
+            OptionModule.m_nShowZmapType = ( OptionModule.m_nShowZmapType And Not 8)
+         End If
+         WritePrivateProfileString(S_SCENE, K_SHOWZMAP, OptionModule.m_nShowZmapType.ToString())
+         EgtSetShowZmap( OptionModule.m_nShowZmapType, True)
+      End Set
+   End Property
+
    Public Property DxfScaleFactor As String
       Get
          Return LenToString(OptionModule.m_dDxfScaleFactor, 5)
@@ -787,6 +858,11 @@ Public Class OptionWindowVM
          Return (IniFile.m_nKeyOptions And KEY_OPT.DOORS) <> 0
       End Get
    End Property
+   Public ReadOnly Property DoorsActive As Boolean
+      Get
+         Return IniFile.IsActiveDoors()
+      End Get
+   End Property
    Public Property DoorsOn As Boolean
       Get
          Return DoorsEnabled AndAlso OptionModule.m_bDoorsOn
@@ -824,6 +900,7 @@ Public Class OptionWindowVM
    Private m_cmdExportMachineCmd As ICommand
    Private m_cmdUpdateBeamCmd As ICommand
    Private m_cmdUpdateWallCmd As ICommand
+   Private m_cmdUpdateDoorsCmd As ICommand
 
 #Region "Messages"
 
@@ -869,9 +946,9 @@ Public Class OptionWindowVM
          Return EgtMsg(6536)                     ' Linee spesse
       End Get
    End Property
-   Public ReadOnly Property SmoothTriMeshMsg As String
+   Public ReadOnly Property SceneSurfQualityMsg As String
       Get
-         Return EgtMsg(6518)                     ' Superfici smussate
+         Return EgtMsg(6518)                     ' Qualità visualizzazione superfici
       End Get
    End Property
    Public ReadOnly Property UpdateLicenceMsg As String
@@ -1085,7 +1162,7 @@ Public Class OptionWindowVM
    End Property
    Public ReadOnly Property DoorsMsg As String
       Get
-         Return "Doors"
+         Return "Doors (" & Path.GetFileName( IniFile.m_sDoorsDirPath) & ")"
       End Get
    End Property
    Public ReadOnly Property GunstockMsg As String
@@ -1128,6 +1205,12 @@ Public Class OptionWindowVM
          Return EgtMsg(31212)
       End Get
    End Property
+   
+   Public ReadOnly Property GeomTypeProbingMsg As String
+      Get
+         Return EgtMsg(31220)
+      End Get
+   End Property
 
    Public ReadOnly Property VMillQualityMsg As String
       Get
@@ -1138,6 +1221,17 @@ Public Class OptionWindowVM
 
 #End Region
 
+#Region "Visibility"  
+
+   Public ReadOnly Property ShowZmapVisibility As Visibility
+      Get
+         Return If( (IniFile.m_nUserLevel > 5), Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
+#End Region
+
+
 #Region "COMMANDS"
 
 #Region "TopSceneBackground"
@@ -1349,10 +1443,18 @@ Public Class OptionWindowVM
       Dim sMachDir As String = Path.Combine(IniFile.m_sMachinesRoot, sMachName)
       ' Preparo direttorio temporaneo
       Dim sTempDir As String = Path.Combine(IniFile.m_sMachinesRoot, "Temp")
-      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
-         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
-      End If
-      My.Computer.FileSystem.CreateDirectory(sTempDir)
+      Try
+         If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
+            My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         End If
+         My.Computer.FileSystem.CreateDirectory(sTempDir)
+      Catch
+         ' Problemi di accesso al direttorio delle macchine
+         Dim sErr As String = EgtMsg(6564)
+         EgtOutLog(sErr & " (" & sTempDir & ")")
+         MessageBox.Show(sErr, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
+         Return
+      End Try
       ' Unzip nel direttorio temporaneo
       Using zip As New Ionic.Zip.ZipFile(sMachZip)
          zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
@@ -1753,6 +1855,116 @@ Public Class OptionWindowVM
 
 #End Region ' UpdateWall
 
+
+#Region "UpdateDoors"
+   Public ReadOnly Property UpdateDoors_Command() As ICommand
+      Get
+         If m_cmdUpdateDoorsCmd Is Nothing Then
+            m_cmdUpdateDoorsCmd = New RelayCommand(AddressOf UpdateDoorsCmd)
+         End If
+         Return m_cmdUpdateDoorsCmd
+      End Get
+   End Property
+
+   Public Sub UpdateDoorsCmd()
+      ' Recupero la versione del programma in esecuzione
+      Dim sExeVer As String = IniFile.GetProgramVersion()
+      ' Verifico presenza di una precedente installazione del Doors (file Version.lua oppure Main.lua)
+      Dim sDoorsVer As String = ""
+      IniFile.GetSpecialLuaVersion(IniFile.m_sDoorsDirPath, sDoorsVer)
+      If String.IsNullOrEmpty(sDoorsVer) Then
+         If My.Computer.FileSystem.FileExists(Path.Combine(IniFile.m_sDoorsDirPath, "Main.lua")) AndAlso
+            My.Computer.FileSystem.FileExists(Path.Combine(IniFile.m_sDoorsDirPath, "Machining.lua")) Then
+            sDoorsVer = "2.6l9"
+         Else
+            ' Il modulo "{0}" non è stato trovato, impossibile aggiornare. - Avviso
+            Dim sOut As String = String.Format(EgtMsg(6555), "Doors")
+            MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
+            ' Esco
+            Return
+         End If
+      End If
+      ' Apro dialogo per richiesta file zip del Doors
+      Dim DoorsDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .DefaultExt = ".zip",
+         .Filter = "Doors (.zip)|*.zip",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If DoorsDlg.ShowDialog() <> True Then Return
+      Dim sDoorsZip As String = DoorsDlg.FileName
+      ' Preparo direttorio temporaneo
+      Dim sTempDir As String = Path.Combine(IniFile.m_sTempDir, "Doors")
+      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      End If
+      My.Computer.FileSystem.CreateDirectory(sTempDir)
+      ' Unzip nel direttorio temporaneo
+      Using zip As New Ionic.Zip.ZipFile(sDoorsZip)
+         zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
+      End Using
+      ' Recupero i dati del nuovo Doors
+      Dim sNewName = ""
+      Dim sNewVer = ""
+      Dim sNewMinExe = ""
+      IniFile.GetSpecialLuaData(sTempDir, sNewName, sNewVer, sNewMinExe)
+      ' Verifico che sia veramente il Doors
+      If String.Compare(sNewName, "Doors") <> 0 Then
+         ' Il file zip non contiene il modulo "{0}". - Avviso
+         Dim sOut As String = String.Format(EgtMsg(6556), "Doors")
+         MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
+         ' Rimuovo il direttorio temporaneo ed esco
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         Return
+      End If
+      ' Verifico la versione minima del programma
+      If String.Compare(sExeVer, sNewMinExe) < 0 Then
+         ' Il nuovo modulo "{0}" richiede un programma con versione minima {1}. - Avviso
+         Dim sOut As String = String.Format(EgtMsg(6557), "Doors", sNewMinExe)
+         MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
+         ' Rimuovo il direttorio temporaneo ed esco
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         Return
+      End If
+      ' Verifico la versione del Doors e se più vecchia chiedo cosa fare
+      If String.Compare(sNewVer, sDoorsVer) < 0 Then
+         ' La versione del nuovo modulo "{0}" è più vecchia dell'attuale. Vuoi sovrascrivere lo stesso ?
+         Dim sOut As String = String.Format(EgtMsg(6558), "Doors")
+         If MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15003), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.No Then
+            ' Rimuovo il direttorio temporaneo ed esco
+            My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+            Return
+         End If
+      End If
+      ' Faccio una copia di backup del Doors corrente
+      Dim sBackupDir As String = IniFile.m_sDoorsDirPath & ".old"
+      If My.Computer.FileSystem.DirectoryExists(sBackupDir) Then
+         My.Computer.FileSystem.DeleteDirectory(sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      End If
+      Try
+         My.Computer.FileSystem.CopyDirectory(IniFile.m_sDoorsDirPath, sBackupDir, True)
+      Catch ex As Exception
+         ' L'aggiornamento del modulo "{0}" non è riuscito. - Errore
+         Dim sOut As String = String.Format(EgtMsg(6559), "Doors")
+         EgtOutLog(sOut)
+         MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15001), MessageBoxButton.OK, MessageBoxImage.Error)
+         ' Rimuovo il direttorio temporaneo ed esco
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         Return
+      End Try
+      ' Installo il Doors
+      My.Computer.FileSystem.CopyDirectory(sTempDir, IniFile.m_sDoorsDirPath, True)
+      ' Rimuovo il direttorio temporaneo di installazione
+      My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      ' Il modulo "{0}" è stata aggiornato con successo. - Info
+      Dim sOk As String = String.Format(EgtMsg(6560), "Doors")
+      EgtOutLog(sOk)
+      MessageBox.Show(Application.Current.MainWindow, sOk, EgtMsg(15003), MessageBoxButton.OK)
+   End Sub
+
+#End Region ' UpdateDoors
+
+
 #Region "CloseOptionsCommand"
 
    ''' <summary>
@@ -1837,21 +2049,21 @@ Public Class GeomTypeConverter
 
 End Class
 
-Public Class VMillTypeConverter
+Public Class SceneSurfQualityOptConverter
    Implements IValueConverter
 
    Public Function Convert(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.Convert
       Select Case CInt(value)
-         Case VMillSelTypeOpt.LOWER
-            Return EgtMsg(31215)
-         Case VMillSelTypeOpt.LOW
-            Return EgtMsg(31216)
-         Case VMillSelTypeOpt.STANDARD
-            Return EgtMsg(31217)
-         Case VMillSelTypeOpt.HIGH
-            Return EgtMsg(31218)
-         Case VMillSelTypeOpt.HIGHER
-            Return EgtMsg(31219)
+         Case SceneSurfQualityOpt.LOWER
+            Return EgtMsg(31215)          ' Inferiore
+         Case SceneSurfQualityOpt.LOW
+            Return EgtMsg(31216)          ' Bassa
+         Case SceneSurfQualityOpt.STANDARD
+            Return EgtMsg(31217)          ' Media
+         Case SceneSurfQualityOpt.HIGH
+            Return EgtMsg(31218)          ' Alta
+         Case SceneSurfQualityOpt.HIGHER
+            Return EgtMsg(31219)          ' Superiore
          Case Else
             Return ""
       End Select
@@ -1860,4 +2072,29 @@ Public Class VMillTypeConverter
    Public Function ConvertBack(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
       Throw New NotImplementedException()
    End Function
-End Class
+End Class
+
+Public Class VMillTypeConverter
+   Implements IValueConverter
+
+   Public Function Convert(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.Convert
+      Select Case CInt(value)
+         Case VMillSelTypeOpt.LOWER
+            Return EgtMsg(31215)          ' Inferiore
+         Case VMillSelTypeOpt.LOW
+            Return EgtMsg(31216)          ' Bassa
+         Case VMillSelTypeOpt.STANDARD
+            Return EgtMsg(31217)          ' Media
+         Case VMillSelTypeOpt.HIGH
+            Return EgtMsg(31218)          ' Alta
+         Case VMillSelTypeOpt.HIGHER
+            Return EgtMsg(31219)          ' Superiore
+         Case Else
+            Return ""
+      End Select
+   End Function
+
+   Public Function ConvertBack(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
+      Throw New NotImplementedException()
+   End Function
+End Class

Project/ProjectVM.vb

@@ -4,7 +4,6 @@ Imports System.IO
 Imports System.Globalization
 Imports EgtUILib
 Imports EgtWPFLib5
-Imports EgtWPFLib5.EgtFloating
 
 Public Class ProjectVM
    Inherits TabViewModel
@@ -58,11 +57,12 @@ Public Class ProjectVM
       End Get
    End Property
 
-#End Region
 
+
+#End Region
 #Region "EGTUILIB FIELDS"
 
-    Private m_bCPlaneTypePos As Boolean
+   Private m_bCPlaneTypePos As Boolean
 
    ' Variabile per implementazione eventi
    Private m_InputText As String
@@ -244,14 +244,14 @@ Public Class ProjectVM
             Dim sTitle As String = EgtMsg(10101)
             MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
          End If
-      ' Se altrimenti manca il collegamento con la chiave di rete
+         ' Se altrimenti manca il collegamento con la chiave di rete
       ElseIf IniFile.m_nKeyLevel = -9 Then
          EgtOutLog("Missing Link with Net Dongle")
          ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione."  "Errore"
          Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
          Dim sTitle As String = EgtMsg(10101)
          MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
-      ' Altrimenti manca la licenza
+         ' Altrimenti manca la licenza
       Else
          EgtOutLog("Problems with Licence")
          ' Box di avviso licenza con problemi : sKeyInfo \n "Programma senza licenza. \n Caricala e riavvia il programma."  "Errore"
@@ -294,19 +294,9 @@ Public Class ProjectVM
 
    Private Sub PreInitializeScene()
       ' imposto colore di default
-      Dim DefColor As New Color3d(0, 0, 0)
-      GetPrivateProfileColor(S_GEOMDB, K_DEFAULTCOLOR, DefColor)
-      m_ProjectScene.SetDefaultMaterial(DefColor)
+      m_ProjectScene.SetDefaultMaterial(OptionModule.m_DefMaterialColor)
       ' imposto colori sfondo
-      Dim BackTopColor As New Color3d(192, 192, 192)
-      GetPrivateProfileColor(S_SCENE, K_BACKTOP, BackTopColor)
-      Dim BackBotColor As New Color3d(BackTopColor)
-      GetPrivateProfileColor(S_SCENE, K_BACKBOTTOM, BackBotColor)
-      m_ProjectScene.SetViewBackground(BackTopColor, BackBotColor)
-      ' imposto spessore linee
-      Dim nLineWidth As Integer = 1
-      nLineWidth = GetPrivateProfileInt(S_SCENE, K_LINEWIDTH, nLineWidth)
-      m_ProjectScene.SetLineWidth(nLineWidth)
+      m_ProjectScene.SetViewBackground(OptionModule.m_TopSceneBackground, OptionModule.m_BotSceneBackground)
       ' imposto colori di evidenziazione
       Dim MarkColor As New Color3d(255, 255, 0)
       GetPrivateProfileColor(S_SCENE, K_MARK, MarkColor)
@@ -370,27 +360,21 @@ Public Class ProjectVM
       ' modo di visualizzazione
       Dim nShowMode As Integer = GetPrivateProfileInt(S_SCENE, K_SHOWMODE, SM.SHADING)
       Map.refShowPanelVM.ShowModeState(nShowMode)
+      ' imposto spessore curve
+      EgtSetLineAttribs(OptionModule.GetLineWidth())
       ' visualizzazione direzione curve
       Dim nShowCurveDir As Integer = GetPrivateProfileInt(S_SCENE, K_CURVEDIR, 0)
       Map.refShowPanelVM.ShowCurveDir(nShowCurveDir)
-      ' visualizzazione avanzata dei triangoli costituenti le superfici
-      Dim bShowTriaAdv As Boolean = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1) <> 0)
-      EgtSetShowTriaAdv(bShowTriaAdv)
+      ' qualità di visualizzazione delle superfici
+      OptionModule.SetShowSurfQuality( False)
       ' tipo visualizzazione per Zmap
-      Dim nShowZmap As Integer = GetPrivateProfileInt(S_SCENE, K_SHOWZMAP, 1)
-      EgtSetShowZmap(nShowZmap, False)
+      EgtSetShowZmap( OptionModule.m_nShowZmapType, False)
       ' dimensione lineare max in pixel delle textures
       Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096)
       EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
       ' stile corrente delle quotature
-      OptionModule.m_dExtLineLen = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_EXTLINELEN, 5)
-      OptionModule.m_dArrowLen = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_ARROWLEN, 5)
-      OptionModule.m_dTextDist = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_TEXTDIST, 2)
-      OptionModule.m_nLenIsMM = GetPrivateProfileInt(S_DIMENSIONSTYLE, K_LENISMM, 2)
-      OptionModule.m_nDecDigit = GetPrivateProfileInt(S_DIMENSIONSTYLE, K_DECDIGIT, -2)
-      OptionModule.m_sFont = "" : GetPrivateProfileStringUtf8(S_DIMENSIONSTYLE, K_DIMFONT, "ModernPropS.Nfe", m_sFont)
-      OptionModule.m_dTextHeight = GetPrivateProfileDouble(S_DIMENSIONSTYLE, K_TEXTHEIGHT, 2)
-      EgtSetCurrDimensionStyle(m_dExtLineLen, m_dArrowLen, m_dTextDist, m_nLenIsMM, m_nDecDigit, m_sFont, m_dTextHeight)
+      EgtSetCurrDimensionStyle(OptionModule.m_dExtLineLen, OptionModule.m_dArrowLen, OptionModule.m_dTextDist,
+                               OptionModule.m_nLenIsMM, OptionModule.m_nDecDigit, OptionModule.m_sFont, OptionModule.m_dTextHeight)
       ' lettura da ini della variabile che abilita i gruppi di lavorazione
       IniFile.m_bMachiningGroup = (GetPrivateProfileInt(S_MACH, K_MACHININGGROUP, 0) <> 0)
       Map.refTopCommandBarVM.DrawMode_IsChecked()
@@ -433,7 +417,7 @@ Public Class ProjectVM
          Dim nFlag As Integer = 1
          If Environment.GetCommandLineArgs.Count() > 4 Then Integer.TryParse(Environment.GetCommandLineArgs(4), nFlag)
          ' Modalità cieco con valori 0, 3 e 4
-         Return (nFlag <> 0 And nFlag <> 3 And nFlag <> 4)
+         Return (nFlag <> 0 And nFlag <> 3 And nFlag <> 4 And nFlag <> 8)
       End If
       If sExt = ".ddf" And Environment.GetCommandLineArgs.Count() > 2 Then
          ' Flag
@@ -489,7 +473,7 @@ Public Class ProjectVM
             End If
             ' Esecuzione
             bOk = ExecBeam(sFile, sMachine, nFlag, True)
-         ' altrimenti pareti
+            ' altrimenti pareti
          Else
             ' Verifica abilitazione elaborazione pareti
             If Not VerifyWall(sFile, sMachine, nFlag) Then
@@ -503,12 +487,12 @@ Public Class ProjectVM
          If nFlag = 0 Or nFlag = 3 Or nFlag = 4 Then
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se richiesta visualizzazione DB utensili
+            ' Altrimenti se richiesta visualizzazione DB utensili
          ElseIf nFlag = 11 And bOk Then
             MyMachinePanelVM.ToolDb()
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se richiesta visualizzazione DB lavorazioni
+            ' Altrimenti se richiesta visualizzazione DB lavorazioni
          ElseIf nFlag = 12 And bOk Then
             MyMachinePanelVM.MachDb()
             If bBeam Then
@@ -518,7 +502,7 @@ Public Class ProjectVM
             End If
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se errore
+            ' Altrimenti se errore
          ElseIf Not bOk Then
             EgtZoom(ZM.ALL)
          End If
@@ -597,7 +581,7 @@ Public Class ProjectVM
             bOk = ExecWall(sFile, sMachine, nFlag, False)
          End If
          ' Se richiesta uscita immediata
-         If nFlag = 0 Or nFlag = 3 Or nFlag = 4 Then
+         If nFlag = 0 Or nFlag = 3 Or nFlag = 4 Or nFlag = 8 Then
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
             ' Altrimenti se errore
@@ -1326,6 +1310,15 @@ Public Class ProjectVM
       ElseIf IniFile.m_ProjectMode = ProjectModeOpt.MACHINING And m_SceneSelType = SceneSelTypeOpt.MACHINING And
             (EgtGetType(nId) = GDB_TY.SRF_MESH Or EgtGetType(nId) = GDB_TY.SRF_FRGN) Then
          If Not EgtIsSelectedObj(nId) Then m_Controller.MouseSelectedObj(nId, bLast)
+      ElseIf Not Keyboard.IsKeyDown(Key.LeftShift) Then
+         m_Controller.MouseSelectedObj(nId, False)
+         If EgtIsSelectedObj(nId) Then
+            ' Selezione layer in albero
+            Map.refManageLayerExpanderVM.UpdateObjInObjTreeNoMark(nId)
+            Map.refManageLayerExpanderVM.SelectIdInObjTreeNoMark(nId)
+            Map.refManageLayerExpanderVM.UpdateObjTree()
+         End If
+         EgtDraw()
       Else
          m_Controller.MouseSelectedObj(nId, bLast)
       End If
@@ -1392,7 +1385,7 @@ Public Class ProjectVM
          ' Visualizzo numerazione
          Analyze.CreateAnalyzeGroup()
          Analyze.CreateCurveCompoPntNbrs(nId)
-      ' Se superficie trimesh, visualizzo dati faccetta toccata
+         ' Se superficie trimesh, visualizzo dati faccetta toccata
       ElseIf EgtGetType(nId) = GDB_TY.SRF_MESH Then
          Dim nFac As Integer = EgtSurfTmFacetFromTria(nId, nSub)
          If nFac <> -1 Then
@@ -1400,6 +1393,11 @@ Public Class ProjectVM
             Analyze.CreateAnalyzeGroup()
             Analyze.CreateFacetNormal(nId, nFac)
             Analyze.CreateFacetLoops(nId, nFac)
+
+            If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
+               Analyze.CreateTriaLoop(nId, nSub)
+            End If
+
             ' Recupero i dati (in globale o griglia a seconda della impostazione)
             Dim ptC As Point3d
             Dim vtN As Vector3d
@@ -1411,12 +1409,16 @@ Public Class ProjectVM
                                  " : C(" + LenToString(ptC.x, 3) + "," + LenToString(ptC.y, 3) + "," + LenToString(ptC.z, 3) + ")" +
                                    " N(" + DoubleToString(vtN.x, 4) + "," + DoubleToString(vtN.y, 4) + "," + DoubleToString(vtN.z, 4) + ")" +
                                  " / φ=" + DoubleToString(dPhi, 2) + " θ=" + DoubleToString(dTheta, 2)
+
+            If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
+               sOut &= ", Triangle " + nSub.ToString()
+            End If
             Map.refStatusBarVM.NotifyStatusOutput(sOut)
          End If
-      ' Se Regione, visualizzo dati parte toccata
+         ' Se Regione, visualizzo dati parte toccata
       ElseIf EgtGetType(nId) = GDB_TY.SRF_FRGN Then
          Dim nChk As Integer = nSub
-         If nChk >= 0 AndAlso nChk < EgtSurfFrChunkCount( nId) Then
+         If nChk >= 0 AndAlso nChk < EgtSurfFrChunkCount(nId) Then
             ' Visualizzo la normale e il contorno della parte
             Analyze.CreateAnalyzeGroup()
             Analyze.CreateChunkNormal(nId, nChk)
@@ -1555,7 +1557,7 @@ Public Class ProjectVM
             nFlag = GetPrivateProfileInt(S_IMPORT, K_CNCFLAG, EIC_FL.NONE)
          ElseIf nType = FT.BTL Or nType = FT.BTLX Then
             nFlag = GetPrivateProfileInt(S_IMPORT, K_BTLFLAG, EIB_FL.NONE)
-         ElseIf nType = FT._3MF
+         ElseIf nType = FT._3MF Then
             nFlag = GetPrivateProfileInt(S_IMPORT, K_3MFFLAG, EI3_FL.NONE)
          ElseIf nType = FT.OBJ Or nType = FT.IGES Or nType = FT.STEP_ Or nType = FT.ACIS Or
                 nType = FT.PARASOLID Or nType = FT.JT Or nType = FT.VRML Or nType = FT.C3D Then

Special-Doors/MTableDbV.xaml.vb

@@ -175,7 +175,7 @@ Public Class MTableDbV
    Public Sub DataGrid_PreviewMouseMove(sender As Object, e As MouseEventArgs)
       Dim Element As Object = e.OriginalSource
       While Not IsNothing(Element) AndAlso Not TypeOf Element Is ScrollBar
-         Element = VisualTreeHelper.GetParent(Element)
+         Element = VisualTreeHelper.GetParent(CType(Element, DependencyObject))
       End While
       ' verifico che non sia ScrollBar, di modo che questa continui a funzionare, ma non possa selezionare piu' righe trascinando
       If IsNothing(Element) OrElse Not TypeOf Element Is ScrollBar Then

SpecialPanel/SpecialPanelVM.vb

@@ -10,6 +10,11 @@ Public Class SpecialPanelVM
          Return m_ButtonList
       End Get
    End Property
+   Public ReadOnly Property ButtonCount As Integer
+      Get
+         Return m_ButtonList.Count()
+      End Get
+   End Property
 
    Private m_SpecialPanel_Visibility As Visibility
    Public ReadOnly Property SpecialPanel_Visibility As Visibility
@@ -26,13 +31,14 @@ Public Class SpecialPanelVM
       ' Creo riferimento a questa classe in Map
       Map.SetRefSpecialPanelVM(Me)
       ' se attivo, inizializzo i bottoni leggendoli da file ini
-      If IniFile.IsActiveSpecialPanel Then
-         Dim BtnIndex As Integer = 1
-         Dim CurrBtn As ButtonItem = Nothing
-         While GetPrivateProfileButton(S_SPECIAL, K_BUTTON & BtnIndex, "", CurrBtn)
-            m_ButtonList.Add(CurrBtn)
-            BtnIndex += 1
-         End While
+      If IniFile.IsActiveSpecialPanel(False) Then
+         Dim BtlIndexMax As Integer = If( IniFile.m_nUserLevel > 5, 199, 99)
+         For BtnIndex As Integer = 1 To BtlIndexMax
+            Dim CurrBtn As ButtonItem = Nothing
+            If GetPrivateProfileButton(S_SPECIAL, K_BUTTON & BtnIndex, "", CurrBtn)
+               m_ButtonList.Add(CurrBtn)
+            End If
+         Next
       End If
    End Sub
 

StatusBar/MyStatusBarVM.vb

@@ -533,7 +533,7 @@ Public Class MyStatusBarVM
    Private Function ProcessEvents(ByVal nProg As Integer, ByVal nPause As Integer) As Integer
       ' Se previsto, imposto progress
       If nProg > 0 Then SetLoadingProgress(Math.Min(nProg, 100))
-      ' Notifico a simulazione aggiornamento dati
+      ' Se simulazione attiva, notifico aggiornamento dati
       If Not IsNothing( Map.refSimulationExpanderVM) Then
          ' Uso i valori negativi del primo parametro come flag per la Simulazione
          Dim nFlag As Integer = If( nProg < 0, -nProg, 0)
@@ -541,8 +541,13 @@ Public Class MyStatusBarVM
       End If
       ' Costringo ad aggiornare
       UpdateUI()
-      ' Eventuale attesa
-      Thread.Sleep(nPause)
+      ' Se richiesta pausa
+      If nPause >= 0 Then
+          Thread.Sleep(nPause)
+      ' se altrimenti richiesto aggiornamento visualizzazione
+      ElseIf nPause = -1
+          EgtDraw()
+      End If
       ' Ritorno eventuale stop
       If m_bStopScript Then
          m_bStopScript = False

StructureDataForMessenger.vb

@@ -1,4 +1,6 @@
 Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib5.MachiningTreeViewItem
 
 Public Class PrepareInputBoxParam
    Friend sTitle As String
@@ -62,4 +64,87 @@ Public Class NewMachOpParam
       Me.SelMachOpId = SelMachOpId
    End Sub
 
+End Class
+
+Public Class InfoItem
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Friend nId As Integer
+   ''' <summary>
+   ''' Indice lista info note
+   ''' </summary>
+   Public ReadOnly Property Id As Integer
+      Get
+         Return Id
+      End Get
+   End Property
+
+   Friend sKey As String
+   ''' <summary>
+   ''' Chiave lista info note
+   ''' </summary>
+   Public ReadOnly Property Key As String
+      Get
+         Return sKey
+      End Get
+   End Property
+
+   Friend sValour As String
+   ''' <summary>
+   ''' Valore lista info note
+   ''' </summary>
+   Public Property Valour As String
+      Get
+         Return sValour
+      End Get
+      Set(value As String)
+         sValour = value
+         NotifyPropertyChanged(NameOf(Valour))
+      End Set
+   End Property
+
+#End Region    ' Fields & Properties
+
+   ' Comandi
+   Private m_cmdDoneInfo As ICommand
+
+#Region "CONSTRUCTORS"
+
+   Sub New(nId As Integer, sKey As String, sValue As String)
+      Me.nId = nId
+      Me.sKey = sKey
+      Me.sValour = sValue
+   End Sub
+
+#End Region    ' Constructors
+
+#Region "COMMANDS"
+
+#Region "DoneInfoCommand"
+
+   ''' <summary>
+   ''' Comando per la conferma modifica o aggiunta nuova informazione
+   ''' </summary>
+   Public ReadOnly Property DoneInfoCommand As ICommand
+      Get
+         If m_cmdDoneInfo Is Nothing Then
+            m_cmdDoneInfo = New Command(AddressOf DoneInfo)
+         End If
+         Return m_cmdDoneInfo
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Conferma modifica o aggiunta nuova informazione
+   ''' </summary>
+   Public Sub DoneInfo(ByVal param As Object)
+      Map.refInputExpanderVM.Done(Me)
+   End Sub
+
+#End Region    ' DoneInfoCommand
+
+#End Region    ' Commands
+
 End Class

TopCommandBar/TopCommandBarVM.vb

@@ -224,7 +224,7 @@ Public Class TopCommandBarVM
                nMchGrpId = EgtGetFirstMachGroup()
             End If
             Dim sMachineName As String = ""
-            if EgtGetMachGroupMachineName( nMchGrpId, sMachineName) Then
+            If EgtGetMachGroupMachineName(nMchGrpId, sMachineName) Then
                Map.refMachinePanelVM.SelectedMachine = Map.refMachinePanelVM.MachinesList.FirstOrDefault(Function(x) x.Name = sMachineName)
             End If
          End If
@@ -236,7 +236,7 @@ Public Class TopCommandBarVM
          If EgtGetCurrMachGroup() = GDB_ID.NULL Then
             ExecExitMachScript()
             EgtDraw()
-         ' altrimenti, aggiusto...
+            ' altrimenti, aggiusto...
          Else
             ' se parametri di una lavorazione aperti, disattivo database utensili, lavorazioni e setup 
             Dim bIsEnabled As Boolean = Not IsNothing(Map.refOperationParametersExpanderVM) AndAlso Not Map.refOperationParametersExpanderVM.ParametersIsExpanded

TopTray/TopTrayV.xaml

@@ -26,11 +26,11 @@
    </EgtFloating:EgtFloatingPanel>
    <local:MachinePanelV DataContext="{StaticResource DbPanelViewModel}"/>
    <local:ExecutePanelV DataContext="{StaticResource ExecutePanelViewModel}"/>
-   <local:SpecialPanelV DataContext="{StaticResource SpecialPanelViewModel}"/>
    <local:BeamPanelV DataContext="{StaticResource BeamPanelViewModel}"/>
    <local:WallPanelV DataContext="{StaticResource WallPanelViewModel}"/>
    <local:BeamWallPanelV DataContext="{StaticResource BeamWallPanelViewModel}"/>
    <local:DoorPanelV DataContext="{StaticResource DoorsPanelViewModel}"/>
    <local:GunStockPanelV DataContext="{StaticResource GunStockPanelViewModel}"/>
-   
+   <local:SpecialPanelV DataContext="{StaticResource SpecialPanelViewModel}"/>
+
 </WrapPanel>

Utility/Analyze.vb

@@ -66,6 +66,16 @@ Module Analyze
       Return True
    End Function
 
+   Function CreateTriaLoop( nId As Integer, nT As Integer) As Boolean
+      If m_AnaGrpId = GDB_ID.NULL Then Return False
+      Dim bEnMod As Boolean = EgtGetEnableModified()
+      EgtDisableModified()
+      Dim nCrvId As Integer = EgtExtractSurfTmTriaLoop( nId, nT, m_AnaGrpId)
+      EgtSetColor( nCrvId, New Color3d( 255, 255,0))
+      If bEnMod Then EgtEnableModified()
+      Return True
+   End Function
+
    Function CreateChunkNormal( nId As Integer, nChk As Integer) As Boolean
       If m_AnaGrpId = GDB_ID.NULL Then Return False
       Dim bEnMod As Boolean = EgtGetEnableModified()

Utility/IniFile.vb

@@ -17,6 +17,14 @@ Public Module IniFile
       ONLYDRAW = 3
    End Enum
 
+   Public Enum SceneSurfQualityOpt As Integer
+      LOWER = -2
+      LOW = -1
+      STANDARD = 0
+      HIGH = 1
+      HIGHER = 2
+   End Enum
+
    Public Enum SceneSelModeOpt As Integer
       NULL = 0
       PARTCURVES = 1
@@ -288,7 +296,11 @@ Public Module IniFile
 
    Friend Function IsActiveDoors() As Boolean
       Dim bIsActive As Boolean = (IniFile.m_nKeyOptions And KEY_OPT.DOORS) <> 0 And (GetPrivateProfileInt(S_DOORS, K_DDFENABLE, 0) <> 0)
-      If bIsActive Then GetPrivateProfileString(S_DOORS, K_BASEDIR, "", m_sDoorsDirPath)
+      If bIsActive Then
+          Dim sTemp As String = ""
+          GetPrivateProfileString(S_DOORS, K_BASEDIR, "", sTemp)
+          m_sDoorsDirPath = sTemp.TrimEnd( "\"c)
+      End If
       Return bIsActive
    End Function
 
@@ -316,9 +328,10 @@ Public Module IniFile
       Return (IniFile.m_nKeyOptions And KEY_OPT.ADVMACHINING) <> 0
    End Function
 
-   Friend Function IsActiveSpecialPanel() As Boolean
-      Dim btDummy As ButtonItem = Nothing
-      Return GetPrivateProfileInt(S_SPECIAL, K_SPECIALENABLE, 0) <> 0 AndAlso GetPrivateProfileButton(S_SPECIAL, K_BUTTON & "1", "", btDummy)
+   Friend Function IsActiveSpecialPanel( Optional bTestButton As Boolean = true) As Boolean
+      If GetPrivateProfileInt(S_SPECIAL, K_SPECIALENABLE, 0) = 0 Then Return False
+      If Not bTestButton Then Return True
+      Return (Not IsNothing(Map.refSpecialPanelVM) AndAlso Map.refSpecialPanelVM.ButtonCount > 0)
    End Function
 
    Friend Function GetSpecialLuaVersion( sSpecialLuaDir As String, ByRef sVersion As String) As Boolean

Utility/MachineModel.vb

@@ -11,6 +11,9 @@ Public Module MachineModel
    ''' </summary>
    Friend Function ReadActiveMachiningsFamilies() As MachiningsType()
       Dim ActiveMachiningsFamiliesList As New List(Of MachiningsType)
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_PROBING, 0, m_sCurrMachIniFilePath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.TypeId = MCH_MY.PROBING, .TypeName = EgtMsg(31220)})
+      End If
       If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_DRILLING, 0, m_sCurrMachIniFilePath) <> 0 Then
          ActiveMachiningsFamiliesList.Add(New MachiningsType With {.TypeId = MCH_MY.DRILLING, .TypeName = EgtMsg(MSG_MACHININGSDBPAGE + 1)})
       End If
@@ -163,6 +166,9 @@ Public Module MachineModel
    ''' </summary>
    Friend Function ReadActiveToolsFamilies() As ToolsFamily()
       Dim ActiveToolsFamiliesList As New List(Of ToolsFamily)
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_PROBE, 0, m_sCurrMachIniFilePath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.PROBE, EgtMsg(31011)))      ' Tastatore
+      End If
       If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_DRILLBIT, 0, m_sCurrMachIniFilePath) <> 0 Then
          ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.DRILLBIT, EgtMsg(MSG_TOOLSDBPAGE + 1)))
       End If

Utility/SelData.vb

@@ -21,6 +21,7 @@ Module SelData
 
    Private m_IdSub As New List(Of SelData)
    Private m_SelGrpId As Integer = GDB_ID.NULL
+   Private Const AUX_ID As String = "AuxId"
 
    Friend Sub ClearIdSub()
       RemoveSelGroup()
@@ -32,6 +33,8 @@ Module SelData
       Dim i As Integer = 0
       Do While i < m_IdSub.Count() - 1
          If Not EgtIsSelectedObj( m_IdSub( i).m_nId) Then
+            Dim nAuxId As Integer = GDB_ID.NULL
+            If EgtGetInfo( m_IdSub( i).m_nSel, AUX_ID, nAuxId) Then EgtErase( nAuxId)
             EgtErase( m_IdSub( i).m_nSel)
             m_IdSub.RemoveAt( i)
          Else
@@ -56,6 +59,8 @@ Module SelData
       ' Ricerca ed eliminazione del record con la coppia Id,Sub da rimuovere
       For i As Integer = 0 To m_IdSub.Count() - 1
          If m_IdSub( i).m_nId = nId And m_IdSub( i).m_nSub = nSub Then
+            Dim nAuxId As Integer = GDB_ID.NULL
+            If EgtGetInfo( m_IdSub( i).m_nSel, AUX_ID, nAuxId) Then EgtErase( nAuxId)
             EgtErase( m_IdSub( i).m_nSel)
             m_IdSub.RemoveAt( i)
             Exit For
@@ -68,6 +73,8 @@ Module SelData
       ' Ricerca ed eliminazione di record con identificativo da rimuovere
       For i As Integer = m_IdSub.Count() - 1 To 0 Step -1
          If m_IdSub( i).m_nId = nId Then
+            Dim nAuxId As Integer = GDB_ID.NULL
+            If EgtGetInfo( m_IdSub( i).m_nSel, AUX_ID, nAuxId) Then EgtErase( nAuxId)
             EgtErase( m_IdSub( i).m_nSel)
             m_IdSub.RemoveAt( i)
          End If
@@ -153,6 +160,11 @@ Module SelData
          For nCrvId As Integer = nFirstId + 1 To nFirstId + nCount - 1
             EgtErase( nCrvId)
          Next
+         Dim ptZM As New Point3d()
+         EgtAtParamPoint( nFirstId, 0.5, m_SelGrpId, ptZM)
+         Dim nSpheId = EgtCreateSurfTmSphere( m_SelGrpId, ptZM, 1, 0.1, GDB_RT.LOC)
+         EgtSetColor( nSpheId, New Color3d( 255, 0,0))
+         EgtSetInfo( nFirstId, AUX_ID, nSpheId)
       End If
       If bEnMod Then EgtEnableModified()
       Return nFirstId