update log

release

.gitlab-ci.yml

@@ -24,14 +24,14 @@ variables:
     $FileList = Get-ChildItem("*.lua")
     ForEach ($File in $FileList) {
       $FileName = Split-Path $File -leaf
-      lua54 -o bin\$FileName $FileName
-      echo "lua54 -o bin\$FileName $FileName"
+      lua54 -o bin\$FileName -s $FileName
+      echo "lua54 -o bin\$FileName -s $FileName"
     }
     $FileList = Get-ChildItem("LuaLibs\*.lua")
     ForEach ($File in $FileList) {
       $FileName = Split-Path $File -leaf
-      lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName
-      echo "lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName"
+      lua54 -o bin\LuaLibs\$FileName -s LuaLibs\$FileName
+      echo "lua54 -o bin\LuaLibs\$FileName -s LuaLibs\$FileName"
     }
 
 # helper copia SORGENTI verso cartella di rete X:\ dei SORGENTI

BatchProcessNew.lua

@@ -609,7 +609,8 @@ if  ( WALL.FLAG == 0 and ( bToProcess or bToRecalc)) or WALL.FLAG == 3 or WALL.F
 end
 
 -- *** Genero programma CN *** ( se richiesto)
-if WALL.FLAG == 0 or WALL.FLAG == 4 then
+local bIsGenerationEnabled = ( EgtGetNumberFromIni( 'Mach', 'NoPartProgram', 0, EgtGetIniFile()) == 0)
+if bIsGenerationEnabled and ( WALL.FLAG == 0 or WALL.FLAG == 4) then
    EgtOutLog( ' +++ Generating NC part program >>>')
    local sInfo = 'EgtCAM5' .. EgtIf( EgtIs64bit(), ' 64bit', '')
    if EgtGetExeVersion then

Compile.bat

@@ -1,30 +1,30 @@
 
-REM Compilazione degli script Wall Egaltech                         2023.09.26
+REM Compilazione degli script Wall Egaltech                         2024.03.24
 REM Per togliere info di debug aggiungere flag -s prima del nome del file di input
 
 REM Compilazione 32 e 64 bit
 
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallExec.lua                      LuaLibs\WallExec.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallLib.lua                       LuaLibs\WallLib.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WMachiningLib.lua                 LuaLibs\WMachiningLib.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessCut.lua                   LuaLibs\WProcessCut.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDoubleCut.lua             LuaLibs\WProcessDoubleCut.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDrill.lua                 LuaLibs\WProcessDrill.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDtMortise.lua             LuaLibs\WProcessDtMortise.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WFeatureTopology.lua              LuaLibs\WFeatureTopology.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessFreeContour.lua           LuaLibs\WProcessFreeContour.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessLapJoint.lua              LuaLibs\WProcessLapJoint.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMark.lua                  LuaLibs\WProcessMark.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMortise.lua               LuaLibs\WProcessMortise.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessSawCut.lua                LuaLibs\WProcessSawCut.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessText.lua                  LuaLibs\WProcessText.lua
-\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessVariant.lua               LuaLibs\WProcessVariant.lua
-\EgtProg\Dll32\luac54 -o bin\BatchProcess.lua                          BatchProcess.lua
-\EgtProg\Dll32\luac54 -o bin\BatchProcessNew.lua                       BatchProcessNew.lua
-\EgtProg\Dll32\luac54 -o bin\GetWallData.lua                           GetWallData.lua
-\EgtProg\Dll32\luac54 -o bin\NestFlipAndRotate.lua                     NestFlipAndRotate.lua
-\EgtProg\Dll32\luac54 -o bin\NestProcess.lua                           NestProcess.lua
-\EgtProg\Dll32\luac54 -o bin\Overturn.lua                              Overturn.lua
-\EgtProg\Dll32\luac54 -o bin\Process.lua                               Process.lua
-\EgtProg\Dll32\luac54 -o bin\Rotate.lua                                Rotate.lua
-\EgtProg\Dll32\luac54 -o bin\Version.lua                               Version.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallExec.lua                   -s LuaLibs\WallExec.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallLib.lua                    -s LuaLibs\WallLib.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WMachiningLib.lua              -s LuaLibs\WMachiningLib.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessCut.lua                -s LuaLibs\WProcessCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDoubleCut.lua          -s LuaLibs\WProcessDoubleCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDrill.lua              -s LuaLibs\WProcessDrill.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDtMortise.lua          -s LuaLibs\WProcessDtMortise.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WFeatureTopology.lua           -s LuaLibs\WFeatureTopology.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessFreeContour.lua        -s LuaLibs\WProcessFreeContour.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessLapJoint.lua           -s LuaLibs\WProcessLapJoint.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMark.lua               -s LuaLibs\WProcessMark.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMortise.lua            -s LuaLibs\WProcessMortise.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessSawCut.lua             -s LuaLibs\WProcessSawCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessText.lua               -s LuaLibs\WProcessText.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessVariant.lua            -s LuaLibs\WProcessVariant.lua
+\EgtProg\Dll32\luac54 -o bin\BatchProcess.lua                       -s BatchProcess.lua
+\EgtProg\Dll32\luac54 -o bin\BatchProcessNew.lua                    -s BatchProcessNew.lua
+\EgtProg\Dll32\luac54 -o bin\GetWallData.lua                        -s GetWallData.lua
+\EgtProg\Dll32\luac54 -o bin\NestFlipAndRotate.lua                  -s NestFlipAndRotate.lua
+\EgtProg\Dll32\luac54 -o bin\NestProcess.lua                        -s NestProcess.lua
+\EgtProg\Dll32\luac54 -o bin\Overturn.lua                           -s Overturn.lua
+\EgtProg\Dll32\luac54 -o bin\Process.lua                            -s Process.lua
+\EgtProg\Dll32\luac54 -o bin\Rotate.lua                             -s Rotate.lua
+\EgtProg\Dll32\luac54 -o bin\Version.lua                            -s Version.lua

LuaLibs/WFeatureTopology.lua

@@ -192,6 +192,7 @@ function WFeatureTopology.Classify( Proc, b3Raw)
       sFamily = 'DRILLING'
    elseif Proc.Fct == 1 and bIsAnyDimensionLongAsPart and bIsFeatureCuttingEntireSection then
       sFamily = 'Cut'
+      bIsThrough = true
    elseif Proc.Fct == 1 and bIsAnyDimensionLongAsPart then
       sFamily = 'Bevel'
       bIsThrough = true

LuaLibs/WProcessDoubleCut.lua

@@ -66,9 +66,8 @@ function WPDC.Make( Proc, nRawId, b3Raw)
    -- se singola faccia, passo a quella lavorazione
    if Proc.Fct == 1 then return Cut.Make( Proc, nRawId, b3Raw) end
    -- altrimenti due facce e passo alla LapJoint
-   local LapProc = { PartId = Proc.PartId, Id = Proc.Id, Grp = Proc.Grp + 2, Prc = Proc.Prc, Box = Proc.Box, Fct = Proc.Fct, Flg = Proc.Flg,
-                     Diam = Proc.Diam, Fcs = Proc.Fcs, Fce = Proc.Fce, CutId = Proc.CutId, TaskId = Proc.TaskId}
-   return LapJoint.Make( LapProc, nRawId, b3Raw)
+   Proc.Grp = Proc.Grp + 2
+   return LapJoint.Make( Proc, nRawId, b3Raw)
 end
 
 ---------------------------------------------------------------------

LuaLibs/WProcessFreeContour.lua

@@ -1,4 +1,4 @@
--- ProcessFreeContour.lua by Egaltech s.r.l. 2023/10/02
+-- ProcessFreeContour.lua by Egaltech s.r.l. 2024/03/24
 -- Gestione calcolo profilo libero per Pareti
 -- 2021/11/15 Penna e chiodature sono sempre riportate sulla faccia sopra anche se nel progetto sono sotto.
 -- 2021/12/10 In taglio con lama aggiunta gestione SCC per testa Gearbox.
@@ -28,6 +28,7 @@
 -- 2023/11/14 Spostamento di alcune funzioni in WallLib.
 --            Aggiunta dei FreeContour in doppio.
 -- 2023/12/13 In MakeByPocket aggiunta la possibilità di svuotare tasche passanti.
+-- 2024/03/24 Sostituite funzioni di Collision Detection (EgtCDe*) con quelle di verifica interferenza (EgtTest*).
 
 -- Tabella per definizione modulo
 local WPF = {}
@@ -699,18 +700,17 @@ end
 ---------------------------------------------------------------------
 local function CalcInterference( nNewProc, vtExtr, ptCentr, dDiam1, dDiam2,
                                  dTall1, dTall2, dDiam3, dTall3)
-
    local ptCentrGrid1 = ptCentr + ( vtExtr * 0.01)
    local frOriTool = Frame3d( ptCentrGrid1, vtExtr)
-   local bColl1 = EgtCDeConeSolid( frOriTool, dDiam1/2, dDiam2/2, dTall1, nNewProc, 0, GDB_RT.GLOB)
+   local bColl1 = EgtTestConeSurface( frOriTool, dDiam1/2, dDiam2/2, dTall1, nNewProc, 0, GDB_RT.GLOB)
    if bColl1 then return true end
    local ptCentrGrid2 = ptCentr + ( vtExtr * ( dTall1 + 0.01))
    frOriTool = Frame3d( ptCentrGrid2, vtExtr)
-   local bColl2 = EgtCDeCylSolid( frOriTool, dDiam2/2, (dTall2-dTall1), nNewProc, 0, GDB_RT.GLOB)
+   local bColl2 = EgtTestCylSurface( frOriTool, dDiam2/2, (dTall2-dTall1), nNewProc, 0, GDB_RT.GLOB)
    if bColl2 then return true end
    local ptCentrGrid3 = ptCentr + ( vtExtr * ( dTall2 + 0.01))
    frOriTool = Frame3d( ptCentrGrid3, vtExtr)
-   local bColl3 = EgtCDeCylSolid( frOriTool, dDiam3/2, (dTall3-dTall2), nNewProc, 0, GDB_RT.GLOB)
+   local bColl3 = EgtTestCylSurface( frOriTool, dDiam3/2, (dTall3-dTall2), nNewProc, 0, GDB_RT.GLOB)
    if bColl3 then return true end
    -- restituisco risultato controllo collisioni
    return false

LuaLibs/WProcessLapJoint.lua

@@ -1351,7 +1351,7 @@ local function MakeByMill( Proc, nFacet, nOthFac, nRawId, b3Raw, dSideDist)
    if not sMilling then
       local sErr = 'Error : Side not found in library'
       EgtOutLog( sErr)
-      return false, sErr
+      return false, sErr, true
    end
    -- recupero i dati dell'utensile
    local dMillDiam = 20
@@ -2755,7 +2755,10 @@ local function MakeTwoFaces( Proc, nRawId, b3Raw)
             bLikeAsMakeFirstGroove = false
             return MakeSideGrooveByMill( Proc, nFacetVert, nRawId, b3Raw, EgtIf( bEnableMillOnSide and dMaxDepthOnSide, sMillOnSide, nil), dMaxDepthOnSide, bMakeFirstGroove, bMachFromDn, dAng, bLikeAsMakeFirstGroove, nil, nil, bDoubleMillOnSide)
          else
-            local bOk, sErr = MakeByMill( Proc, nFacet, 1 - nFacet, nRawId, b3Raw, dSideDist)
+            local bOk, sErr, bSideMachiningNotFound = MakeByMill( Proc, nFacet, 1 - nFacet, nRawId, b3Raw, dSideDist)
+            if not bOk and bSideMachiningNotFound then
+               bOk, sErr = MakeByPocketing( Proc, nFacet, nRawId, b3Raw)
+            end
             -- se angolo ottuso riprendo il lato quasi verticale
             if bOk and dAng and dAng > -90 + 10 * GEO.EPS_SMALL then
                local bOk2, sErr2 = MakeSideGrooveByMill( Proc, nFacetVert, nRawId, b3Raw, EgtIf( bEnableMillOnSide and dMaxDepthOnSide, sMillOnSide, nil), dMaxDepthOnSide, bMakeFirstGroove, bMachFromDn, dAng, false, nil, true)
@@ -2860,7 +2863,7 @@ local function MakeMoreFaces( Proc, nRawId, b3Raw)
       local vtN = EgtSurfTmFacetNormVersor( Proc.Id, nFacInd, GDB_ID.ROOT)
       local _, dH, dV = EgtSurfTmFacetMinAreaRectangle( Proc.Id, nFacInd, GDB_ID.ROOT)
       local dMaxSlotThicknessForBlade = 25
-      local bIsSmallSlot = ( Proc.Fct == 3 and ( min( dH, dV) < dMaxSlotThicknessForBlade + 10 * GEO.EPS_SMALL) and vtN:getZ() > -0.01)
+      local bIsSmallSlot = ( Proc.Fct == 3 and ( min( dH, dV) < dMaxSlotThicknessForBlade - 10 * GEO.EPS_SMALL) and vtN:getZ() > -0.01)
       -- se di fianco
       if not bPckt and Proc.Fct >= 3 and ( ( vtN:getZ() < WD.NZ_MINA) or bIsSmallSlot) then
          -- recupero elevazione faccia in feature
@@ -2922,7 +2925,7 @@ local function MakeMoreFaces( Proc, nRawId, b3Raw)
             end
          else
             -- fresatura (se definita); se disponibile, cerco di usare un utensile che non lavori al limite della capacità di sottosquadro
-            local dSideElevMultiplier = 1.2
+            local dSideElevMultiplier = 1.1
             local sMilling = WM.FindMilling( 'SideGroove', nil, nil, nil, nil, min( dH, dV), nil, dSideElevMultiplier * dSideElev)
             -- se non ho trovato un utensile un po' più grande del sottosquadro richiesto, passo alla ricerca standard
             if not sMilling then

LuaLibs/WProcessSawCut.lua

@@ -29,7 +29,11 @@ function WPSC.Classify( Proc, b3Raw)
    if not AuxId then return false end
    AuxId = AuxId + Proc.Id
    local vtDir = EgtSV( AuxId, GDB_ID.ROOT)
-   return ( vtDir:getZ() > 0.5)
+   local vtDirZ = vtDir:getZ()
+   if Proc.IsThrough then
+      vtDirZ = abs( vtDir:getZ())
+   end
+   return ( vtDirZ > 0.5)
 end
 
 ----------------------------------------------------------------------

UpdateLog.txt

@@ -1,5 +1,18 @@
            ==== Wall Update Log ====
 
+Versione 2.6e2 (24/05/2024)
+- Modif : in LapJoint se non si trova una lavorazione di tipo side si cerca una pocketing
+- Fixed : in BatchProcessNew se generazione non abilitata si salta questa fase invece di restituire errore
+- Fixed : piccoli errori in LapJoint e DoubleCut.
+
+Versione 2.6e1 (03/03/5/2024)
+- Fixed : correzione per assegnazione a SawCut di flag passante (bIsThrough).
+
+Versione 2.6c3 (26/03/2024)
+- Modif : modifica per richiamare le nuove funzioni di Test interferenza solidi superfici nel controllo validità lavorazione pulizia spigoli interni
+- Modif : in compilazione vengono eliminate le info di debug
+- Fixed : in processSawCut si ignora verso vettore se taglio passante.
+
 Versione 2.6b2 (21/02/2024)
 - Added : aggiunta gestione spostamento pannello rispetto a origine da dato BTL di TS3v7.
 

Version.lua

@@ -1,6 +1,6 @@
--- Version.lua by Egalware s.r.l. 2024/02/20
+-- Version.lua by Egalware s.r.l. 2024/03/24
 -- Gestione della versione di Wall
 
 NAME = 'Wall'
-VERSION = '2.6b2'
-MIN_EXE = '2.5b3'
+VERSION = '2.6e2'
+MIN_EXE = '2.6c2'