Merge branch 'release/3.1h2'

3.1h1

LuaLibs/BeamExec.lua

@@ -2300,7 +2300,7 @@ function BeamExec.ProcessFeatures()
       BD.IMPROVE_HEAD_TAIL_DRILLINGS = true
    end
    -- costanti per doppio
-   MIRROR_DRILLINGS_MIN_DISTANCE = 40
+   MIRROR_DRILLINGS_MIN_DISTANCE = 25 --TODO spostare la variabile MinDistToolX1X2 nel BeamData e usare quella
    MIRROR_POCKETS_MIN_DISTANCE = EgtIf( BD.DOWN_HEAD, 35, 50)
    -- verifica se possibile rotazione di 90 gradi
    BD.ROT90 = BD.ROT90 and Verify90DegRotation( EgtGetFirstRawPart())

LuaLibs/BeamLib.lua

@@ -1448,7 +1448,7 @@ function BeamLib.GetToolFromMachining( sMachiningName)
             Tool.Thickness = EgtTdbGetCurrToolParam( MCH_TP.THICK) or 0
             Tool.CornerRadius = EgtTdbGetCurrToolParam( MCH_TP.CORNRAD) or 0
          -- fresa (TODO al momento aggiunte solo le informazioni che servono)
-         elseif Tool.Type == MCH_TY.MILL_STD or MCH_TY.MILL_NOTIP then
+         elseif Tool.Type == MCH_TY.MILL_STD or Tool.Type == MCH_TY.MILL_NOTIP then
             if BD.GetSetupInfo then
                Tool.IsOnAggregate = BD.GetSetupInfo( EgtTdbGetCurrToolParam( MCH_TP.HEAD)).bToolOnAggregate
             else
@@ -1459,6 +1459,8 @@ function BeamLib.GetToolFromMachining( sMachiningName)
             if Tool.StemDiameter > Tool.Diameter + GEO.EPS_SMALL then
                Tool.MaxDepth = Tool.MaxDepth - BD.COLL_SIC
             end
+         elseif Tool.Type == MCH_TY.DRILL_STD or Tool.Type == MCH_TY.DRILL_LONG then
+            Tool.Length = EgtTdbGetCurrToolParam( MCH_TP.LEN) or 0
          -- altri utensili al momento non previsti
          else
             error( 'Wrong tool type')

LuaLibs/FacesBySaw.lua

@@ -931,7 +931,7 @@ function FacesBySaw.MakeTwo( Proc, nPhase, nRawId, nPartId, dOvmHead, sCutType,
 end
 
 ---------------------------------------------------------------------
-function FacesBySaw.CalcLeadInOutPerpGeom( ptP1, ptP2, vtV1, vtV2, vtN, dRad, vtRef, dCutExtra, b3Box, bIsRightWorkside)
+function FacesBySaw.CalcLeadInOutPerpGeom( ptP1, ptP2, vtV1, vtV2, vtN, dRad, vtRef, dCutExtra, b3Box)
    -- Mi assicuro che i vettori ingresso/uscita giacciano nel piano
    vtV1 = vtV1 - vtV1 * vtN * vtN ;   vtV1:normalize()
    vtV2 = vtV2 - vtV2 * vtN * vtN ;   vtV2:normalize()
@@ -941,7 +941,7 @@ function FacesBySaw.CalcLeadInOutPerpGeom( ptP1, ptP2, vtV1, vtV2, vtN, dRad, vt
    -- Sistema di riferimento intrinseco al taglio
    local vtX = vtTg ^ vtN
    local frFace = Frame3d( ptP1, vtX, vtTg, vtN)
-   local bRight = EgtIf( bIsRightWorkside == nil, ( vtX * vtRef > 0), bIsRightWorkside)
+   local bRight = ( vtX * vtRef > 0)
    EgtOutLog( 'LioPerp --> Vref=' .. tostring( vtRef) .. ' V1=' .. tostring( vtV1) .. ' V2=' .. tostring( vtV2), 3)
 
    -- Versore di attacco e uscita

LuaLibs/ProcessDrill.lua

@@ -559,7 +559,7 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    nFac, CosB, vFaces = GetHoleStartData( ptCen, vtExtr, b3Solid)
    -- Calcolo acciorciamento affondamento utile per evitare collisione portautensile con faccia
    TgA = CosB / sqrt( 1 - CosB * CosB)
-   dSubL = ( dDiamTh / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA
+   local dSubL = ( dDiamTh / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA
    -- Per fori molto inclinati ( < 30 gradi) si usa la testa della macchina per l'accorciamento. Fast esclusa
    if BD.C_SIMM and CosB > 0.866  then
       dSubL = ( 190 / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA - 116
@@ -667,7 +667,13 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
             end
          end
       else
-         sUserNotes = EgtSetValInNotes( sUserNotes, 'LastStep', MIRROR_DRILLINGS_MIN_DISTANCE / 2 + 10)
+         local Tool = BL.GetToolFromMachining( sDrilling)
+         local dDrillbitTipLength_H1 = dMaxToolLength - Tool.Length
+         local sNotes = EgtTdbGetCurrToolParam( MCH_TP.USERNOTES)
+         EgtTdbSetCurrTool( EgtGetValInNotes( sNotes, 'DOUBLE', 's') or Tool.Name)
+         local dDrillbitTipLength_H2 = ( EgtTdbGetCurrToolParam( MCH_TP.TOTLEN) or 0) - ( EgtTdbGetCurrToolParam( MCH_TP.LEN) or 0)
+         EgtTdbSetCurrTool( Tool.Name)
+         sUserNotes = EgtSetValInNotes( sUserNotes, 'LastStep', ( MIRROR_DRILLINGS_MIN_DISTANCE + dDrillbitTipLength_H1 + dDrillbitTipLength_H2 + 10) / 2 + 1)
       end
       if dDepth > Proc.MachDepthDouble + 10 * GEO.EPS_SMALL then
          sMyWarn = 'Warning in double head drilling : depth (' .. EgtNumToString( dDepth, 1) .. ') reduced to (' .. EgtNumToString( Proc.MachDepthDouble, 1) .. ') to match H2 max tool depth'

LuaLibs/ProcessLapJoint.lua

@@ -1792,7 +1792,9 @@ local function MakeRoundCleanContour( Proc, nPhase, nRawId, nPartId, b3Raw,
                                       dDepth, bOneShot)
 
    -- recupero la lavorazione senza considerare l'elevazione perché viene calcolata l'elevazione utile
-   local sMilling = ML.FindMilling( 'SmallToolContour', nil, nil, nil, nil, not( bMillDown and not bDoubleSide), bMillDown and not bDoubleSide)
+   local bTopHead = not( bMillDown and not bDoubleSide)
+   local bDownHead = bMillDown and not bDoubleSide
+   local sMilling = ML.FindMilling( 'SmallToolContour', nil, nil, nil, nil, bTopHead, bDownHead)
    if not sMilling then
       local sMyWarn = 'Warning : SmallToolContour not found in library'
       EgtOutLog( sMyWarn)
@@ -1954,17 +1956,31 @@ local function MakeRoundCleanContour( Proc, nPhase, nRawId, nPartId, b3Raw,
       EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.LEFT)
       -- inversione direzione utensile
       local bInvertMach = false
+      local bInvertTool = false
       if nPathInt then
-         -- verifico se devo invertire direzione utensile (in caso di direzione verso la verticale)
+         if bDownHead then
-         if vtN1:getZ() < BD.NZ_MINA and abs(vtN1:getZ()) >= 0.707 then
+            if vtN1:getZ() > 10 * GEO.EPS_SMALL then
-            EgtSetMachiningParam( MCH_MP.TOOLINVERT, true)
+               bInvertTool = true
-            bInvertMach = true
+               bInvertMach = true
-         -- altrimenti se da fare in una sola volta e direzionato verso Y+ lo inverto per lavorarlo davanti
+            end
-         elseif not bDoubleSide and vtN1:getY() > GEO.EPS_SMALL then
+         elseif bMillDown and bDoubleSide then
-            EgtSetMachiningParam( MCH_MP.TOOLINVERT, true)
+            if vtN1:getZ() > 10 * GEO.EPS_SMALL and bDownHead then
-            bInvertMach = true
+               bInvertTool = true
+               bInvertMach = true
+            end
+         else
+            -- verifico se devo invertire direzione utensile (in caso di direzione verso la verticale)
+            if vtN1:getZ() < BD.NZ_MINA and abs( vtN1:getZ()) >= 0.707 then
+               bInvertTool = true
+               bInvertMach = true
+            -- altrimenti se da fare in una sola volta e direzionato verso Y+ lo inverto per lavorarlo davanti
+            elseif not bDoubleSide and vtN1:getY() > 10 * GEO.EPS_SMALL then
+               bInvertTool = true
+               bInvertMach = true
+            end
          end
       end
+      EgtSetMachiningParam( MCH_MP.TOOLINVERT, bInvertMach)
       -- imposto posizione braccio porta testa
       local nSCC = MCH_SCC.NONE
       if not BD.C_SIMM then
@@ -2039,7 +2055,7 @@ local function MakeRoundCleanContour( Proc, nPhase, nRawId, nPartId, b3Raw,
          -- imposto lato di lavoro sinistro
          EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.LEFT)
          -- imposto direzione utensile opposta
-         EgtSetMachiningParam( MCH_MP.TOOLINVERT, true)
+         EgtSetMachiningParam( MCH_MP.TOOLINVERT, not bInvertTool)
          -- imposto posizione braccio porta testa
          local nSCC = MCH_SCC.NONE
          if not BD.C_SIMM then
@@ -2068,7 +2084,7 @@ local function MakeRoundCleanContour( Proc, nPhase, nRawId, nPartId, b3Raw,
          EgtSetMachiningParam( MCH_MP.DEPTH, dMachDepth)
          -- setto se devo invertire il percorso
          local bInvert = CheckToInvert( nIdPath, true)
-         EgtSetMachiningParam( MCH_MP.INVERT, not bInvert)
+         EgtSetMachiningParam( MCH_MP.INVERT, not EgtIf( bInvertMach, not bInvert, bInvert))
          -- Note utente con dichiarazione nessuna generazione sfridi per Vmill e massima elevazione
          local sUserNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
          sUserNotes = EgtSetValInNotes( sUserNotes, 'VMRS', 0)
@@ -4583,9 +4599,11 @@ local function MakeByPockets( Proc, nPhase, nRawId, nPartId, nChamfer, dDepthCha
                   else
                      dMachDepth = dMaxDepthDn - ( dDepth / 2) - dCollSic
                      dElev = dMaxDepthDn
-                     bComplete = false
+                     if dMaxDepthDn < ( dDepth / 2) + dCollSic + 100 * GEO.EPS_SMALL then
-                     sWarn = 'Warning : elevation bigger than max tool depth'
+                        bComplete = false
-                     EgtOutLog( sWarn)
+                        sWarn = 'Warning : elevation bigger than max tool depth'
+                        EgtOutLog( sWarn)
+                     end
                   end
                else
                   -- se anche lavorando dal lato opposto non riesco a svuotare completamente la fessura 
@@ -4593,9 +4611,11 @@ local function MakeByPockets( Proc, nPhase, nRawId, nPartId, nChamfer, dDepthCha
                   if dMaxDepth < ( dDepth / 2) + BD.CUT_EXTRA + dCollSic then
                      dMachDepth = dMaxDepth - (dDepth / 2) - dCollSic
                      dElev = dMaxDepth
-                     bComplete = false
+                     if dMaxDepth < ( dDepth / 2) + dCollSic + 100 * GEO.EPS_SMALL then
-                     sWarn = 'Warning : elevation bigger than max tool depth'
+                        bComplete = false
-                     EgtOutLog( sWarn)
+                        sWarn = 'Warning : elevation bigger than max tool depth'
+                        EgtOutLog( sWarn)
+                     end
                   end
                end
                if bMakeContour then
@@ -4894,6 +4914,30 @@ local function ManageAntiSplintBySaw( Proc, b3Raw, b3Solid, bIsU, vtN, nFacInd,
                      EgtSetMachiningParam( MCH_MP.INVERT, not bInvert)
                      -- setto l'offset pari allo spessore lama
                      EgtSetMachiningParam( MCH_MP.OFFSL, -dSawThick)
+                     local LeadIn = {
+                        dStartAddLen = EgtGetMachiningParam( MCH_MP.STARTADDLEN),
+                        dLeadInTangDist = EgtGetMachiningParam( MCH_MP.LITANG),
+                        dLeadInPerpDist = EgtGetMachiningParam( MCH_MP.LIPERP),
+                        dLeadInElev = EgtGetMachiningParam( MCH_MP.LIELEV),
+                        dLeadInCompLen = EgtGetMachiningParam( MCH_MP.LICOMPLEN)
+                     }
+                     local LeadOut = {
+                        dEndAddLen = EgtGetMachiningParam( MCH_MP.ENDADDLEN),
+                        dLeadOutTangDist = EgtGetMachiningParam( MCH_MP.LOTANG),
+                        dLeadOutPerpDist = EgtGetMachiningParam( MCH_MP.LOPERP),
+                        dLeadOutElev = EgtGetMachiningParam( MCH_MP.LOELEV),
+                        dLeadOutCompLen = EgtGetMachiningParam( MCH_MP.LOCOMPLEN)
+                     }
+                     EgtSetMachiningParam( MCH_MP.STARTADDLEN, LeadOut.dEndAddLen)
+                     EgtSetMachiningParam( MCH_MP.LITANG, LeadOut.dLeadOutTangDist)
+                     EgtSetMachiningParam( MCH_MP.LIPERP, LeadOut.dLeadOutPerpDist)
+                     EgtSetMachiningParam( MCH_MP.LIELEV, LeadOut.dLeadOutElev)
+                     EgtSetMachiningParam( MCH_MP.LICOMPLEN, LeadOut.dLeadOutCompLen)
+                     EgtSetMachiningParam( MCH_MP.ENDADDLEN, LeadIn.dStartAddLen)
+                     EgtSetMachiningParam( MCH_MP.LOTANG, LeadIn.dLeadInTangDist)
+                     EgtSetMachiningParam( MCH_MP.LOPERP, LeadIn.dLeadInPerpDist)
+                     EgtSetMachiningParam( MCH_MP.LOELEV, LeadIn.dLeadInElev)
+                     EgtSetMachiningParam( MCH_MP.LOCOMPLEN, LeadIn.dLeadInCompLen)
                   end
                end
             end
@@ -5662,7 +5706,7 @@ function SawPlusChain.GetLongFaceEdges( Proc, Face)
 end
 
 
-function SawPlusChain.CalculateLeadInOut( Machining, EdgeToMachine, FaceToMachine, b3Raw, Proc)
+function SawPlusChain.CalculateLeadInOut( Machining, EdgeToMachine, FaceToMachine, b3Raw)
    -- TODO implementare le funzioni di Tool Collision Avoidance (vedi wiki e FacesBysaw -> CalcLeadInOutPerpGeom)
 
    -- si determina l'eventuale riduzione da applicare in caso di inizio o fine chiusi
@@ -5713,18 +5757,8 @@ function SawPlusChain.CalculateLeadInOut( Machining, EdgeToMachine, FaceToMachin
          LeadIn.StartAddLength = BD.CUT_EXTRA
          LeadOut.EndAddLength = BD.CUT_EXTRA
       end
-      local vtN = Vector3d( FaceToMachine.VtN)
-      local vtOrthO
-      if EdgeToMachine.Elevation > - 10 * GEO.EPS_SMALL then
-         vtOrthO = Vector3d( EdgeToMachine.ToolDirection)
-      else
-         vtOrthO = -Vector3d( EdgeToMachine.ToolDirection)
-      end
       local ptP1 = Point3d( EdgeToMachine.ptStart)
       local ptP2 = Point3d( EdgeToMachine.ptEnd)
-      local Edges = BL.GetEdgesInfo( Proc, FaceToMachine.Id)
-      local vtV1 = -Vector3d( Edges[EdgeToMachine.PreviousEdgeIndex].vtEdge)
-      local vtV2 = Vector3d( Edges[EdgeToMachine.NextEdgeIndex].vtEdge)
       
       local bInvert = Machining.Invert
       if bInvert then
@@ -5732,30 +5766,9 @@ function SawPlusChain.CalculateLeadInOut( Machining, EdgeToMachine, FaceToMachin
          vtV1, vtV2 = vtV2, vtV1
       end
       local vtTg = ptP2 - ptP1 ;   vtTg:normalize()
-      
-      -- Versore di riferimento
-      local vtRef = Vector3d( vtTg)
-      vtRef:rotate( vtN, EgtIf( bInvert, -90, 90))
-      
-      local bIsRightWorkside = Machining.Workside == MCH_MILL_WS.RIGHT
-      if bIsRightWorkside ~= bInvert--[[ and EdgeToMachine.Id ~= FaceToMachine.Edges.BottomEdge.Id]] then
-         vtV1 = -vtV1
-         vtV2 = -vtV2
-      end
-
-      local b3Box = BBox3d( b3Raw)
-      b3Box:expand( BD.CUT_SIC)
-      local ptPa1 = ptP1 + LeadIn.StartAddLength * -vtTg
-      local ptPa2 = ptP2 + LeadOut.EndAddLength * vtTg
-
       Machining.vtTg = vtTg
-      LeadIn.vtV1 = vtV1
+      Machining.vtV = vtV1
-      LeadOut.vtV2 = vtV2
-      LeadIn.ptP1 = ptP1
-      LeadOut.ptP2 = ptP2
-      Machining.vtOffset = vtRef
       
-      LeadIn.TangentDistance, LeadIn.PerpDistance, LeadOut.TangentDistance, LeadOut.PerpDistance = Fbs.CalcLeadInOutPerpGeom( ptPa1, ptPa2, vtV1, vtV2, vtN, ( Machining.Tool.Diameter / 2), vtRef, -Machining.RadialOffset, b3Box, bIsRightWorkside)
    else
       if Machining.IsStartClosed then
          LeadIn.StartAddLength = -dAddLengthToReduce
@@ -5868,23 +5881,42 @@ function SawPlusChain.ApplyMachining( Machining, b3Raw)
 end
 
 
-function SawPlusChain.Saw.GetSCC( vtMachiningDirection)
+function SawPlusChain.Saw.GetSCC( vtMachiningDirection, vtN, vtTg)
    -- TODO implementare SCC come per FacesBySaw
-   local nSCC = MCH_SCC.NONE
+   if not BD.TURN then
-   if AreSameVectorApprox( vtMachiningDirection, Z_AX()) then
+      -- per ora aggregato usato in verticale solo in split e headcut; Fast non influenzata
-      nSCC = MCH_SCC.ADIR_ZP
+      if BD.C_SIMM and bMaximizeVerticalDepth then
-   elseif AreOppositeVectorApprox( vtMachiningDirection, Z_AX()) then
+         nSCC = MCH_SCC.ADIR_ZM
-      nSCC = MCH_SCC.ADIR_ZM
+      elseif abs( vtMachiningDirection:getX()) > abs( vtMachiningDirection:getY()) - GEO.EPS_SMALL then
-   elseif AreSameVectorApprox( vtMachiningDirection, Y_AX()) then
+         -- se il taglio è orizzontale, si gira aggregato lama per facilitare caduta del legno
-      nSCC = MCH_SCC.ADIR_YP
+         if abs( vtTg:getZ()) < 10 * GEO.EPS_SMALL and not AreSameOrOppositeVectorApprox( vtN, Z_AX()) then
-   elseif AreOppositeVectorApprox( vtMachiningDirection, Y_AX()) then
+            nSCC = EgtIf( ( vtMachiningDirection:getX() > -GEO.EPS_SMALL), MCH_SCC.ADIR_XM, MCH_SCC.ADIR_XP)
-      nSCC = MCH_SCC.ADIR_YM
+         else
-   elseif AreSameVectorApprox( vtMachiningDirection, X_AX()) then
+            nSCC = EgtIf( ( vtMachiningDirection:getX() > -GEO.EPS_SMALL), MCH_SCC.ADIR_XP, MCH_SCC.ADIR_XM)
-      nSCC = MCH_SCC.ADIR_XP
+         end
-   elseif AreOppositeVectorApprox( vtMachiningDirection, X_AX()) then
+      else
-      nSCC = MCH_SCC.ADIR_XM
+         -- se il taglio è orizzontale, si gira aggregato lama per facilitare caduta del legno
+         if abs( vtTg:getZ()) < 10 * GEO.EPS_SMALL and not AreSameOrOppositeVectorApprox( vtN, Z_AX()) then
+            nSCC = EgtIf( ( vtMachiningDirection:getY() > -GEO.EPS_SMALL), MCH_SCC.ADIR_YM, MCH_SCC.ADIR_YP)
+         else
+            nSCC = EgtIf( ( vtMachiningDirection:getY() > -GEO.EPS_SMALL), MCH_SCC.ADIR_YP, MCH_SCC.ADIR_YM)
+         end
+      end
+   else
+      if AreSameVectorApprox( vtMachiningDirection, Z_AX()) then
+         nSCC = MCH_SCC.ADIR_ZP
+      elseif AreOppositeVectorApprox( vtMachiningDirection, Z_AX()) then
+         nSCC = MCH_SCC.ADIR_ZM
+      elseif AreSameVectorApprox( vtMachiningDirection, Y_AX()) then
+         nSCC = MCH_SCC.ADIR_YP
+      elseif AreOppositeVectorApprox( vtMachiningDirection, Y_AX()) then
+         nSCC = MCH_SCC.ADIR_YM
+      elseif AreSameVectorApprox( vtMachiningDirection, X_AX()) then
+         nSCC = MCH_SCC.ADIR_XP
+      elseif AreOppositeVectorApprox( vtMachiningDirection, X_AX()) then
+         nSCC = MCH_SCC.ADIR_XM
+      end
    end
-
    return nSCC
 end
 
@@ -6006,15 +6038,15 @@ function SawPlusChain.Saw.CalculateMachiningParameters( Proc, FaceToMachine, Edg
       Cutting.Faceuse = BL.GetNearestOrthoOpposite( -EdgeToMachine.ToolDirection)
    end
    Cutting.nEdgeFaceUse = EdgeToMachine.Id
-   -- SCC
-   Cutting.SCC = SawPlusChain.Saw.GetSCC( EdgeToMachine.ToolDirection)
    -- asse bloccato
    Cutting.BlockedAxis = {}
    Cutting.BlockedAxis.Orientation = 'perpendicular'
    Cutting.BlockedAxis.VtN = FaceToMachine.VtN
    Cutting.BlockedAxis.VtOut = EgtIf( FaceToMachine.VtN:getX() > 0, X_AX(), -X_AX())
    -- approccio e retrazione
-   Cutting.LeadIn, Cutting.LeadOut = SawPlusChain.CalculateLeadInOut( Cutting, EdgeToMachine, FaceToMachine, b3Raw, Proc)
+   Cutting.LeadIn, Cutting.LeadOut = SawPlusChain.CalculateLeadInOut( Cutting, EdgeToMachine, FaceToMachine, b3Raw)
+   -- SCC
+   Cutting.SCC = SawPlusChain.Saw.GetSCC( EdgeToMachine.ToolDirection, FaceToMachine.VtN, Cutting.vtTg)
    -- eventuale step orizzontale
    Cutting.HorizontalSteps = {}
    if Cutting.Tool.SideStep then
@@ -6048,38 +6080,15 @@ function SawPlusChain.Saw.ApplyAllSteps( Cutting, b3Raw)
    local bIsCuttingOk = false
    local sCuttingOriginalMessage = Cutting.Message or ''
    local sCuttingApplyMessage = ''
-   local vtTg = Cutting.vtTg
-   local bInvert = Cutting.Invert
    local dOriginalRadialOffset = Cutting.RadialOffset
    local dOriginalLeadInPerpDistance = Cutting.LeadIn.PerpDistance
-   local dOriginalLeadInTangDistance = Cutting.LeadIn.TangentDistance
    local dOriginalLeadOutPerpDistance = Cutting.LeadOut.PerpDistance
-   local dOriginalLeadOutTangDistance = Cutting.LeadOut.TangentDistance
    
    for i = Cutting.HorizontalSteps.Count, 1, -1 do
-      local dRadialStep = Cutting.HorizontalSteps.StepLength * ( i - 1)
+      Cutting.RadialOffset = dOriginalRadialOffset + Cutting.HorizontalSteps.StepLength * ( i - 1)
-      local dDirectionProportion = ( Cutting.LeadIn.vtV1 * vtTg)
-      Cutting.RadialOffset = dOriginalRadialOffset + dRadialStep
-      local dStepOffset = Cutting.RadialOffset - dOriginalRadialOffset
-      local dTangOffsetStep = ( Cutting.RadialOffset * dDirectionProportion)
-      local bTiltedSlot = abs( dDirectionProportion) > 0 + 10 * GEO.EPS_SMALL
-      local bIsRightWorkside = Cutting.Workside == MCH_MILL_WS.RIGHT
-
       -- update distanza perpendicolare attacco per contemplare l'offset applicato
-
+      Cutting.LeadIn.PerpDistance = dOriginalLeadInPerpDistance - Cutting.RadialOffset
-      local b3Box = BBox3d( b3Raw)
+      Cutting.LeadOut.PerpDistance = dOriginalLeadOutPerpDistance - Cutting.RadialOffset
-      b3Box:expand( BD.CUT_SIC)
-      local ptPa1 = Cutting.LeadIn.ptP1 + ( Cutting.LeadIn.StartAddLength - dTangOffsetStep) * -vtTg + dStepOffset * Cutting.LeadIn.vtV1
-      local ptPa2 = Cutting.LeadOut.ptP2 + ( Cutting.LeadOut.EndAddLength + dTangOffsetStep) * vtTg + dStepOffset * Cutting.LeadOut.vtV2
-
-      Cutting.LeadIn.TangentDistance, Cutting.LeadIn.PerpDistance, Cutting.LeadOut.TangentDistance, Cutting.LeadOut.PerpDistance = Fbs.CalcLeadInOutPerpGeom( ptPa1, ptPa2, Cutting.LeadIn.vtV1, Cutting.LeadOut.vtV2, Cutting.BlockedAxis.VtN, ( Cutting.Tool.Diameter / 2), Cutting.vtOffset, -Cutting.RadialOffset, b3Box, bIsRightWorkside)
-      --Cutting.LeadIn.PerpDistance = dOriginalLeadInPerpDistance - dRadialStep --dOriginalLeadInPerpDistance - Cutting.RadialOffset
-      --Cutting.LeadIn.TangentDistance = dOriginalLeadInTangDistance + dTangOffsetStep --+ Cutting.LeadIn.StartAddLength
-      --Cutting.LeadOut.PerpDistance = dOriginalLeadOutPerpDistance - dRadialStep --- Cutting.RadialOffset
-      --Cutting.LeadOut.TangentDistance = dOriginalLeadOutTangDistance - dTangOffsetStep --- Cutting.LeadOut.EndAddLength
-
-      Cutting.LeadIn.StartAddLength = Cutting.LeadIn.StartAddLength + EgtIf( bTiltedSlot, - ( dTangOffsetStep + Cutting.LeadIn.StartAddLength), 0)
-      Cutting.LeadOut.EndAddLength = Cutting.LeadOut.EndAddLength + EgtIf( bTiltedSlot, ( dTangOffsetStep + Cutting.LeadOut.EndAddLength), 0)
       -- applicazione lavorazione
       bIsCuttingOk, sCuttingApplyMessage = SawPlusChain.ApplyMachining( Cutting, b3Raw)
       -- update messaggi
@@ -8209,7 +8218,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                               local bOk, sWarn2 = MakeRoundCleanCornerOrContour( Proc, nPhase, nRawId, nPartId, b3Raw, 
                                                                                  nFacInd, nAddGrpId, dDiamTool, nContourSmallTool, bMillDown, 
                                                                                  bDoubleSide, vtOrtho, nPathInt, nSurfInt, b3Solid, 
-                                                                                 dDepth, bOneShotm)
+                                                                                 dDepth, bOneShot)
                               if not bOk then return false, sWarn2 end
                               if sWarn2 then
                                  if not sWarn then sWarn = '' end
@@ -8301,7 +8310,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                                     local bOk, sWarn2 = MakeRoundCleanCornerOrContour( Proc, nPhase, nRawId, nPartId, b3Raw, 
                                                                                        nFacInd, nAddGrpId, dDiamTool, nContourSmallTool, bMillDown, 
                                                                                        bDoubleSide, vtOrtho, nPathInt, nSurfInt, b3Solid, 
-                                                                                       dDepth, bOneShotm)
+                                                                                       dDepth, bOneShot)
                                     if not bOk then return false, sWarn2 end
                                     if sWarn2 then
                                        if not sWarn then sWarn = '' end

LuaLibs/ProcessProfCamb.lua

@@ -33,6 +33,7 @@ local sEnableExtraBladeUpperFace = 'Q02' -- i
 local sDepthChamferMill          = 'Q03' -- d
 local sOverMaterialForFinish     = 'Q04' -- d
 local sPreemptiveChamfer         = 'Q05' -- i
+local sDisableAntiSplint         = 'Q19'
 
 -- abilitazioni extra
 local dMakeAntiSplintOnHead = 1 -- valore impronta antischeggia, per disattivare settare = nil o = 0
@@ -301,13 +302,14 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    local sMilling
    -- in base alla direzione iniziale della curva e al valore di entrata valido, setto l'antischeggia
    local bMakeAs
+   local bDeleteAntiSplint = ( EgtGetInfo( Proc.Id, sDisableAntiSplint, 'i') or 0) == 1
    local vtStart = EgtSV( AuxId, GDB_ID.ROOT)
    if nSide == 0 then
-      if abs(vtStart:getY()) >= dActivateCompoAng and dMakeAntiSplintOnHead and abs(dMakeAntiSplintOnHead) > 0 then
+      if abs( vtStart:getY()) >= dActivateCompoAng and dMakeAntiSplintOnHead and abs( dMakeAntiSplintOnHead) > 0 and not bDeleteAntiSplint then
          bMakeAs = true
       end
    else
-      if abs(vtStart:getZ()) >= dActivateCompoAng and dMakeAntiSplintOnHead and abs(dMakeAntiSplintOnHead) > 0 then
+      if abs( vtStart:getZ()) >= dActivateCompoAng and dMakeAntiSplintOnHead and abs( dMakeAntiSplintOnHead) > 0 and not bDeleteAntiSplint then
          bMakeAs = true
       end
    end

UpdateLog.txt

@@ -1,5 +1,23 @@
            ==== Beam Update Log ====
 
+Versione 3.1h2 (24/08/2026)
+- Fixed : in Drill - Fori in doppio con utensili lunghi, corretto calcolo LastStep
+- Fixed : AntiSplintBySaw - Se inverte lavorazione, inverte anche i parametri di LeadIn e LeadOut
+
+Versione 3.1h1 (05/08/2026)
+- Modif : in Pocket non eseguo lavorazione di pulizia tasca (laterale) se le lavorazioni sopra e sotto arrivano esattamente a metà tasca (senza affondamento extra)
+- Modif : in RoundCleanContour - tasca passante lavorata solo da sopra o da sotto e fresa di contorno non lavora tutto, attiva lavorazione in doppio
+
+Versione 3.1g5 (31/07/2026)
+- Fixed : in RoundCleanContour per tasche a 3 facce a U in doppio
+
+Versione 3.1g4 (31/07/2026)
+- Modif : in ProfCamb aggiunta Q19, se = 1 disabilita lavorazione AntiSplint
+- Fixed : in RoundCleanContour per tasche a 3 facce a U MillDown
+
+Versione 3.1g3 (24/07/2026)
+- Fixed : in slot con lama corretta scelta SCC
+
 Versione 3.1g2 (17/07/2026)
 - Modif : Diminuito LastStep forature in doppio
 - Modif : ScarfJoint tra le feature da eseguire dopo i fori che la attraversano

Version.lua

@@ -1,6 +1,6 @@
--- Version.lua by Egaltech s.r.l. 2026/05/31
+-- Version.lua by Egaltech s.r.l. 2026/08/05
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '3.1g2'
+VERSION = '3.1h2'
 MIN_EXE = '3.1b1'