ProcessMortise - Elimina i tagli del piano ed eventuale cubettatura se già presente da un'altra feature, prima eliminava quelli della feature dando problemi con l'ordinamento.

BatchProcessNew.lua

@@ -277,6 +277,15 @@ if bToProcess then
             else
                vBeam[i].Box = b3Solid
             end
+            if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+               local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+               BEAM.ERR = 17
+               BEAM.MSG = sOut
+               WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+               PostErrView( BEAM.ERR, BEAM.MSG)
+               return
+            end
          end
          -- Assegno lunghezza della barra
          dBarLen = vBeam[1].Box:getDimX() + 10
@@ -330,6 +339,15 @@ if bToProcess then
          else
             vBeam[i].Box = b3Solid
          end
+         if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+            local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+            BEAM.ERR = 17
+            BEAM.MSG = sOut
+            WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+            PostErrView( BEAM.ERR, BEAM.MSG)
+            return
+         end
       end
    end
 

LuaLibs/BeamExec.lua

@@ -1641,7 +1641,8 @@ local function SetCutsOnFrontMortises( vProc)
                   -- verifico se i piani coincidono
                   local bSamePlane = ( ptC1 and vtN1 and ptC2 and vtN2 and AreSameVectorApprox( vtN1, vtN2) and ( ptC2 - ptC1) * vtN1 < 1.0)
                   if bSamePlane then
-                     vProc[i].CutFront = vProc[j].Id
+                     --vProc[i].CutFront = vProc[j].Id
+                     vProc[j].bSkipCut = true
                   end
                   -- log
                   local sMsg = string.format( 'Cut %d meet Mortise %d', vProc[i].Id, vProc[j].Id) .. EgtIf( bSamePlane, ' with same plane', '')
@@ -1658,7 +1659,8 @@ local function SetCutsOnFrontMortises( vProc)
                   -- verifico se i piani coincidono
                   local bSamePlane = ( ptC1 and vtN1 and ptC2 and vtN2 and AreSameVectorApprox( vtN1, vtN2) and ( ptC2 - ptC1) * vtN1 < 1.0)
                   if bSamePlane then
-                     vProc[i].CutFront = vProc[j].Id
+                     --vProc[i].CutFront = vProc[j].Id
+                     vProc[j].bSkipCut = true
                   end
                   -- log
                   local sMsg = string.format( 'Cut %d meet DtMortise %d', vProc[i].Id, vProc[j].Id) .. EgtIf( bSamePlane, ' with same plane', '')

LuaLibs/FacesBySaw.lua

@@ -457,7 +457,7 @@ function FacesBySaw.MakeOne( nSurfId, nFacet, sCutting, dSawDiam, Par5, dVzLimDw
          -- se distanza al punto è maggiore del raggio lama, significa che non ho già lavorato, quindi calcolo entrata opportunamente
          if dDistPointToCenter > 0.5 * dSawDiam then
             dLiTang = -dAllStart * dCosAlpha
-            dLiPerp = dDist1 * dSinAlpha
+            dLiPerp = dDist1 * dSinAlpha 
          end
       end
       -- se ho accorciato uscita, setto componente tangente e perpendicolare sul percorso di uscita

LuaLibs/ProcessCut.lua

@@ -479,16 +479,12 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
          -- determino il modo di tagliare
          local vtOrthoO
          local bNoPerpCuts = false
-         local vtO
-         -- Se tagli ortogonali (indice dispari)
          if i % 2 == 1 then
             vtOrthoO = Vector3d( vtN)
-         -- Se tagli perpendicolari (indice pari)
          else
-            -- Se elemento precedente contiene tagli ortogonali
+            local vtO
             if #vCuts[i-1] > 0 then
                vtO = EgtSurfTmFacetNormVersor( vCuts[i-1][1], 0, GDB_ID.ROOT)
-            -- Se elemento successivo contiene tagli ortogonali
             elseif vCuts[i+1] and #vCuts[i+1] > 0 then
                -- lunghezza faccia nell'eventuale direzione ortogonale
                local asseX = EgtSurfTmFacetNormVersor( vCuts[i+1][1], 0, GDB_ID.ROOT)
@@ -556,46 +552,8 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
             end
             local bOk2, sErr2 = Fbs.MakeOne( nSurfToCut, 0, sCutting, dSawDiam, nFaceUseCut2, nil, dCutExtra, BD.CUT_SIC, 0, 0, 0, '', b3Raw)
             if not bOk2 then return false, sErr2 end
-
          -- caso standard
          else
-            if ( i % 2) == 0 and Proc.Fct == 1 and AreSameOrOppositeVectorApprox( vtO, Z_AX()) then
-               local vtOrthoVert = vtN ^ vtO
-               if ( vtN:getY() > 0 and vtOrthoVert:getY() > 0) or ( vtN:getY() < 0 and vtOrthoVert:getY() < 0) then
-                  vtOrthoVert = -vtOrthoVert
-               end
-               local Frame = Frame3d( ptC, vtN, vtO)
-               local b3Fac = EgtGetBBoxRef( vCuts[i][1], GDB_BB.STANDARD, Frame)
-               if abs( b3Fac:getDimY() - BD.MAX_DIM_DICE) > 10 * GEO.EPS_SMALL then
-                  local nVerticalCuts = ceil( b3Fac:getDimY() / ( BD.MAX_LEN_DICE)) - 1
-                  local dVerticalSliceDist = b3Fac:getDimY() / ( nVerticalCuts + 1)
-                  local dSawDiam = 400
-                  if EgtMdbSetCurrMachining( sCutting) then
-                     local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
-                     if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid) or '') then
-                        dSawDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dSawDiam
-                     end
-                  end
-                  -- tagli verticali
-                  for k = 1, nVerticalCuts do
-                     local nFaceUse = BL.GetNearestOrthoOpposite( vtN)
-                     local dVerticalCutOffset = dVerticalSliceDist * k
-                     local sLeadInOutType = 'Perpendicular'
-                     local nMergedParallelSurfId = EgtSurfTmBySewing( nAddGrpId, vCuts[i], false)
-                     local ptVertCut = EgtSurfTmFacetCenter( nMergedParallelSurfId, 0, GDB_ID.ROOT)
-                     ptVertCut = ptVertCut + ( -b3Fac:getDimY()/2 + dVerticalCutOffset) * vtOrthoVert
-                     local nSurfId = EgtSurfTmPlaneInBBox( nAddGrpId, ptVertCut, vtOrthoVert, b3Raw, GDB_RT.GLOB)
-                     if i ~= 2 then
-                        local nMergedPreviousParallelSurfId = EgtSurfTmBySewing( nAddGrpId, vCuts[i-2], false)
-                        local ptOnPreviousParallelSurf = EgtSurfTmFacetCenter( nMergedPreviousParallelSurfId, 0, GDB_ID.ROOT)
-                        EgtCutSurfTmPlane( nSurfId, ptOnPreviousParallelSurf, vtN, false, GDB_RT.GLOB)
-                     end
-                     EgtCutSurfTmPlane( nSurfId, ptVertCut, -vtN, false, GDB_RT.GLOB)
-                     local bOk, sErr = Fbs.MakeOne( nSurfId, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1, BD.CUT_SIC, 0, 0, 0, '', b3Raw, nil, nil, nil, sLeadInOutType, nil, 0, nil)
-                     if not bOk then return bOk, sErr end
-                  end
-               end
-            end
             -- lavoro la faccia
             for j = 1, #vCuts[i] do
                -- se taglio dal basso

LuaLibs/ProcessDtMortise.lua

@@ -236,7 +236,7 @@ function ProcessDtMortise.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    -- verifico se frontale
    local bFront = ( Proc.Prc == 56)
    -- se mortasa di fronte, eseguo il taglio della faccia
-   if bFront then
+   if bFront and not Proc.bSkipCut then
       -- verifico esista la faccia di taglio
       local ptCutC, vtCutN = EgtSurfTmFacetCenter( Proc.Id, 1, GDB_ID.ROOT)
       if ptCutC and vtCutN and AreSameVectorApprox( vtExtr, vtCutN) then

LuaLibs/ProcessMortise.lua

@@ -467,7 +467,7 @@ function ProcessMortise.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    end
 
    -- se mortasa di fronte, eseguo il taglio della faccia
-   if bFront then
+   if bFront and not Proc.bSkipCut then
       -- verifico esista la faccia di taglio
       local ptCutC, vtCutN = EgtSurfTmFacetCenter( Proc.Id, 1, GDB_ID.ROOT)
       if ptCutC and vtCutN and AreSameVectorApprox( vtExtr, vtCutN) then

Process.lua

@@ -89,6 +89,14 @@ local function MyProcessInputData()
       else
          vBeam[i].Box = b3Solid
       end
+      if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+         local sOut = 'Lunghezza ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                      'oltre i limiti della macchina (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+         EgtOutLog( sOut)
+         EgtOutBox( sOut, 'Lavora Travi', 'WARNING')
+         EgtDraw()
+         return false
+      end
    end
    dRawW = vBeam[1].Box:getDimY()
    dRawH = vBeam[1].Box:getDimZ()