In SplitCut e HeadCut aggiunti smussi con possibilità di raccordare o smussare spigoli

LuaLibs/ProcessHeadCut.lua

@@ -159,6 +159,105 @@ local function MakeChamfer( nOriId, Proc, nPhase, nRawId, nPartId, dOvmHead)
    return true, nil
 end
 
+---------------------------------------------------------------------
+-- smussi in testa
+local function MakeHeadChamfer( idProc, nPartId)
+   local dDepthHeadChamfer = EgtGetInfo( idProc, 'Q08', 'd') or 0
+   -- se non attivo esco subito
+   if dDepthHeadChamfer < 100 * GEO.EPS_SMALL then
+      return
+   end
+
+   -- recupero gruppo per geometria aggiuntiva
+   local AddGrpId = BL.GetAddGroup( nPartId)
+   if not AddGrpId then
+      local sErr = 'Error on process StartFace impossible to find AddGroup'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   -- recupero la lavorazione
+   local sMilling = ML.FindMilling( 'Mark')
+   if not sMilling then
+      local sErr = 'Error : milling not found in library'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   local nLoopId, nLoopCnt = EgtExtractSurfTmFacetLoops( idProc, 0, AddGrpId)
+   if not nLoopId or nLoopCnt > 1 then
+      local sErr = 'Error MakeHeadChamfer : too many loops'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   -- setto direzione estrusione corretta
+   EgtModifyCurveExtrusion( nLoopId, X_AX())
+   EgtSetGridFrame( Frame3d( 0,0,0, GDB_FR.RIGHT))
+
+   local dQ09Value = EgtGetInfo( idProc, 'Q09', 'd')
+   local bChamferedEdge = dQ09Value > 0
+
+   local nIdFirstEntity, nEntityCnt = EgtExplodeCurveCompo( nLoopId)
+   local p3MidPoint = EgtMP( nIdFirstEntity, GDB_ID.GRID)
+   
+   for i = 0, nEntityCnt - 1 do
+      if EgtCurveLength( nIdFirstEntity + i) - 10 < abs( dQ09Value) * 2 then
+         local sErr = 'Error MakeHeadChamfer : Q09 too high'
+         EgtOutLog( sErr)
+         return false, sErr
+      end
+   end
+
+   -- creo raccordo o fillet
+   for i = 0, nEntityCnt - 1 do
+      local idFirst = nIdFirstEntity + i
+      local idSecond = EgtIf( i == nEntityCnt - 1, nIdFirstEntity, idFirst + 1)
+      local ptEndPointFirst = EgtEP( idFirst, GDB_ID.GRID) - ( abs( dQ09Value) * EgtEV( idFirst, GDB_ID.GRID))
+      local ptStartPointSecond = EgtSP( idSecond, GDB_ID.GRID) + ( abs( dQ09Value) * EgtEV( idSecond, GDB_ID.GRID))
+
+      if bChamferedEdge then
+         EgtCurveChamfer( AddGrpId, idFirst, ptEndPointFirst, idSecond, ptStartPointSecond, abs( dQ09Value), true, GDB_RT.GRID)
+      else
+         EgtCurveFillet( AddGrpId, idFirst, ptEndPointFirst, idSecond, ptStartPointSecond, abs( dQ09Value), true, GDB_RT.GRID)
+      end
+   end
+
+   EgtSelectPathObjs( nIdFirstEntity, true)
+   local idGeom, idGeomCnt = EgtCurveCompoByChain( AddGrpId, GDB_ID.SEL, {0,0,0}, true)
+   if not idGeom or idGeomCnt > 1 then
+      local sErr = 'Error MakeHeadChamfer : too many loops'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+   EgtChangeClosedCurveStartPoint( idGeom, p3MidPoint, GDB_RT.GRID)
+
+   -- Inserisco la lavorazione del lato standard
+   local dExtra = 2
+   local sName1 = 'HeadCham_' .. ( EgtGetName( idProc) or tostring( idProc))
+   local nMch1Id = EgtAddMachining( sName1, sMilling)
+   if not nMch1Id then
+      local sErr = 'Error adding machining ' .. sName1 .. '-' .. sMilling
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+   -- aggiungo geometria
+   EgtSetMachiningGeometry( {{ idGeom, -1}})
+   -- assegno affondamento e offset radiale
+   EgtSetMachiningParam( MCH_MP.DEPTH, dDepthHeadChamfer + dExtra)
+   EgtSetMachiningParam( MCH_MP.OFFSR, dExtra)
+   -- assegno lato di lavoro
+   EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
+   -- eseguo
+   if not ML.ApplyMachining( true, false) then
+      local _, sErr = EgtGetLastMachMgrError()
+      EgtSetOperationMode( nMch1Id, false)
+      return false, sErr
+   end
+
+   return true, nil
+end
+
 ---------------------------------------------------------------------
 -- tagli verticali aggiuntivi
 local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw, dOffsetBetweenCuts)
@@ -533,6 +632,16 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
    
    local bOk, sErr = MakeStandardCuts( Proc, b3Raw, nCuts, dOffsL, HeadCutType, Cutting1Data, Cutting2Data, nil, dOvmHead)
 
+
+   -- alla fine del taglio si aggiungono gli smussi in testa
+   local _, sErrHeadChamfer = MakeHeadChamfer( nOriId or Proc.Id, nPartId)
+   if sErr then
+      sErr = sErr..'\n'..sErrHeadChamfer
+   else
+      sErr = sErrHeadChamfer
+   end
+
+
    return bOk, sErr
 end
 

LuaLibs/ProcessLapJoint.lua

@@ -146,7 +146,7 @@ local Q_MAX_ELEVATION       = '' -- d
 local Q_SAW_PLUS_CHAIN      = '' -- i
 local Q_FORCE_CHAINSAW      = '' -- i
 local Q_CHAINSAW_FROM_SIDE  = '' -- i
-
+local Q_MILL_AS_BLADE_CONVENTIONAL = '' -- i
 
 -- variabile smussi
 local bMadeChamfer
@@ -195,11 +195,13 @@ local function AssignQIdent( Proc)
    Q_FORCE_CHAINSAW     = 'Q12'
    -- TODO da riportare a Q13 quando è sistemata la gestione del movimento in macchina nell'attacco laterale
    Q_CHAINSAW_FROM_SIDE = 'Q999'
+   Q_MILL_AS_BLADE_CONVENTIONAL = ''
 
    if ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 16 then
       Q_FORCE_BLADE         = 'Q01' -- i
       Q_DEPTH_CHAMFER       = 'Q04' -- d
       Q_ONLY_CHAMFER        = 'Q05' -- i
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 17 then
       Q_DEPTH_CHAMFER       = 'Q01' -- d
       Q_ONLY_CHAMFER        = 'Q02' -- i
@@ -220,6 +222,7 @@ local function AssignQIdent( Proc)
       Q_BLADE_ON_ALONG_FACE = 'Q04' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
       Q_DEPTH_CHAMFER       = 'Q07' -- d
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    elseif ( Proc.Grp == 1 or Proc.Grp == 2)  and  Proc.Prc == 30 then
       Q_BLADE_ON_ALONG_FACE = 'Q04' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 32 then
@@ -228,19 +231,23 @@ local function AssignQIdent( Proc)
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 33 then
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 34 then
       Q_CONTOUR_SMALL_TOOL  = 'Q01' -- i
       Q_USE_MILL            = 'Q02' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
    elseif ( Proc.Grp == 4)  and  Proc.Prc == 37 then
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    elseif ( Proc.Grp == 4)  and  Proc.Prc == 39 then
       Q_CONTOUR_SMALL_TOOL  = 'Q01' -- i
       Q_USE_MILL            = 'Q02' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 90 then
       Q_ANTISPLINT_TYPE     = 'Q03' -- i
       Q_SIDE_ROUGH_TOOL     = 'Q04' -- i
+      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
    end
    -- le altre features gestite non hanno parametri Q
 end
@@ -2856,7 +2863,10 @@ local function MakeByMillAsSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
    for i = 1, nStep do
       local dOffs = ( i - 1) * dStep
       if vtN:getZ() < dVzLimDwnUp then dOffs = dOffs + dSawThick end
-      local bOk, sErr, nMchId = Fbs.MakeOne( Proc.Id, nFacAdj, sCutting, dSawDiam, nFaceUse, dVzLimDwnUp, 0, BD.CUT_SIC, dOffs, dStartDist, dEndDist, nil, b3Raw)
+      -- forzatura lavorazione discorde in base a parametro Q su feature
+      local nQ14Param = EgtGetInfo( Proc.Id, Q_MILL_AS_BLADE_CONVENTIONAL, 'd') or 0
+      local bForceInvert = nQ14Param == 1 or ( nQ14Param == 2 and vtN:getX() < 0.1)
+      local bOk, sErr, nMchId = Fbs.MakeOne( Proc.Id, nFacAdj, sCutting, dSawDiam, nFaceUse, dVzLimDwnUp, 0, BD.CUT_SIC, dOffs, dStartDist, dEndDist, nil, b3Raw, bForceInvert)
       if not bOk then return bOk, sErr end
       -- setto l'elevazione
       local sNotes = 'MaxElev=' .. EgtNumToString( 0, 1) .. ';'
@@ -3565,6 +3575,11 @@ local function MakePocket( Proc, nPartId, b3Solid, ptPs, tvtN, nFaceRef, sMchFin
    if not ML.ApplyMachining( true, false) then
       -- provo ad allargare leggermente la tasca
       EgtSetMachiningParam( MCH_MP.OFFSR, -0.1)
+      -- se percorso a Zig-Zag, provo a cambiarlo in spirale
+      local nPocketSubType = EgtGetMachiningParam( MCH_MP.SUBTYPE)
+      if nPocketSubType == MCH_POCK_SUB.ZIGZAG then
+         EgtSetMachiningParam( MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALIN)
+      end
       if not ML.ApplyMachining( true, false) then
          local _, sErr = EgtGetLastMachMgrError()
          EgtSetOperationMode( nMchFId, false)

LuaLibs/ProcessProfCamb.lua

@@ -506,7 +506,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    -- se il chamfer non è esclusivo continuo con le altre lavorazioni
    if nChamfer < 2 then
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessProfConcave.lua

@@ -453,7 +453,7 @@ function ProcessProfConcave.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          end
       end
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessProfConvex.lua

@@ -453,7 +453,7 @@ function ProcessProfConvex.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          end
       end
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessSplit.lua

@@ -167,6 +167,99 @@ local function MakeChamfer( nOriId, Proc, nPhase, nRawId, nPartId, dOvmTail)
    return true, nil
 end
 
+---------------------------------------------------------------------
+-- smussi in coda
+local function MakeTailChamfer( idProc, nPartId, dDepthTailChamfer)
+   -- recupero gruppo per geometria aggiuntiva
+   local AddGrpId = BL.GetAddGroup( nPartId)
+   if not AddGrpId then
+      local sErr = 'Error on process StartFace impossible to find AddGroup'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   -- recupero la lavorazione
+   local sMilling = ML.FindMilling( 'Mark')
+   if not sMilling then
+      local sErr = 'Error : milling not found in library'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   local nLoopId, nLoopCnt = EgtExtractSurfTmFacetLoops( idProc, 0, AddGrpId)
+   if not nLoopId or nLoopCnt > 1 then
+      local sErr = 'Error MakeHeadChamfer : too many loops'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+
+   -- setto direzione estrusione corretta
+   EgtModifyCurveExtrusion( nLoopId, -X_AX())
+   EgtSetGridFrame( Frame3d( 0,0,0, GDB_FR.LEFT))
+
+   local dQ09Value = EgtGetInfo( idProc, 'Q09', 'd')
+   local bChamferedEdge = dQ09Value > 0
+
+   local nIdFirstEntity, nEntityCnt = EgtExplodeCurveCompo( nLoopId)
+   local p3MidPoint = EgtMP( nIdFirstEntity, GDB_ID.GRID)
+   
+   for i = 0, nEntityCnt - 1 do
+      if EgtCurveLength( nIdFirstEntity + i) - 10 < abs( dQ09Value) * 2 then
+         local sErr = 'Error MakeTailChamfer : Q09 too high'
+         EgtOutLog( sErr)
+         return false, sErr
+      end
+   end
+
+   -- creo raccordo o fillet
+   for i = 0, nEntityCnt - 1 do
+      local idFirst = nIdFirstEntity + i
+      local idSecond = EgtIf( i == nEntityCnt - 1, nIdFirstEntity, idFirst + 1)
+      local ptEndPointFirst = EgtEP( idFirst, GDB_ID.GRID) - ( abs( dQ09Value) * EgtEV( idFirst, GDB_ID.GRID))
+      local ptStartPointSecond = EgtSP( idSecond, GDB_ID.GRID) + ( abs( dQ09Value) * EgtEV( idSecond, GDB_ID.GRID))
+
+      if bChamferedEdge then
+         EgtCurveChamfer( AddGrpId, idFirst, ptEndPointFirst, idSecond, ptStartPointSecond, abs( dQ09Value), true, GDB_RT.GRID)
+      else
+         EgtCurveFillet( AddGrpId, idFirst, ptEndPointFirst, idSecond, ptStartPointSecond, abs( dQ09Value), true, GDB_RT.GRID)
+      end
+   end
+
+   EgtSelectPathObjs( nIdFirstEntity, true)
+   local idGeom, idGeomCnt = EgtCurveCompoByChain( AddGrpId, GDB_ID.SEL, {0,0,0}, true)
+   if not idGeom or idGeomCnt > 1 then
+      local sErr = 'Error MakeTailChamfer : too many loops'
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+   EgtChangeClosedCurveStartPoint( idGeom, p3MidPoint, GDB_RT.GRID)
+
+   -- Inserisco la lavorazione del lato standard
+   local dExtra = 2
+   local sName1 = 'TailCham_' .. ( EgtGetName( idProc) or tostring( idProc))
+   local nMch1Id = EgtAddMachining( sName1, sMilling)
+   if not nMch1Id then
+      local sErr = 'Error adding machining ' .. sName1 .. '-' .. sMilling
+      EgtOutLog( sErr)
+      return false, sErr
+   end
+   -- aggiungo geometria
+   EgtSetMachiningGeometry( {{ idGeom, -1}})
+   -- assegno affondamento e offset radiale
+   EgtSetMachiningParam( MCH_MP.DEPTH, dDepthTailChamfer + dExtra)
+   EgtSetMachiningParam( MCH_MP.OFFSR, dExtra)
+   -- assegno lato di lavoro
+   EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
+   -- eseguo
+   if not ML.ApplyMachining( true, false) then
+      local _, sErr = EgtGetLastMachMgrError()
+      EgtSetOperationMode( nMch1Id, false)
+      return false, sErr
+   end
+
+   return true, nil
+end
+
 ---------------------------------------------------------------------
 -- lavorazione con sega a catena per sezioni alte e larghe
 local function MakeCutByChainSaw( nSurfId, sSawing, nFaceUse, dDepth, sNotes, dRadialOffset, bExtendStartEnd, bInvert)
@@ -819,6 +912,43 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
 
    local bOk, sErr = MakeStandardCuts( Proc, b3Raw, nCuts, dOffsL, TailCutType, Cutting1Data, Cutting2Data, nil, dLenEndRaw)
 
+   -- se smussi in coda da aggiungere
+   local dDepthTailChamfer = EgtGetInfo( nOriId or Proc.Id, 'Q08', 'd') or 0
+   if dDepthTailChamfer > 100 * GEO.EPS_SMALL then
+      -- creo subito nuova fase qui, a meno che non sia stata già creata
+      if nNewPhase == 0 then
+         BL.AddPhaseWithRawParts( nRawId, BD.OriXR, BD.PosXR, BD.RAW_OFFSET)
+         nNewPhase = EgtGetCurrPhase()
+         local nDispId = EgtGetPhaseDisposition( nNewPhase)
+         if sDownOrSideOrStd == 'down' then
+            EgtRotateRawPart( nRawId, X_AX(), 180)
+            EgtSetInfo( nDispId, 'TYPE', 'MID2')
+            EgtSetInfo( nDispId, 'ROT', -2)
+         elseif sDownOrSideOrStd == 'side' then
+            if bPreMove then EgtMoveRawPart( nRawId, vtMove) end
+            EgtRotateRawPart( nRawId, X_AX(), EgtIf( BD.RIGHT_LOAD, -90, 90))
+            if not bPreMove then EgtMoveRawPart( nRawId, vtMove) end
+            EgtSetInfo( nDispId, 'TYPE', 'MID2')
+            EgtSetInfo( nDispId, 'ROT', -1)
+         else
+            EgtSetInfo( nDispId, 'TYPE', 'END')
+         end
+         EgtSetInfo( nDispId, 'ORD', nOrd)
+         -- se grezzo successivo senza pezzi e finale, va tolto
+         local nNextRawId = EgtGetNextRawPart( nRawId)
+         if nNextRawId  and  EgtGetPartInRawPartCount( nNextRawId) == 0  and  EgtGetRawPartBBox( nNextRawId):getDimX() < BD.MinRaw then
+            EgtRemoveRawPartFromCurrPhase( nNextRawId)
+         end
+      end
+      -- alla fine del taglio si aggiungono gli smussi in testa
+      local _, sErrHeadChamfer = MakeTailChamfer( nOriId or Proc.Id, nPartId, dDepthTailChamfer)
+      if sErr then
+         sErr = sErr..'\n'..sErrHeadChamfer
+      else
+         sErr = sErrHeadChamfer
+      end
+   end
+
    return bOk, sErr, nNewPhase
 end