Nelle profilature, aggiunta tolleranza in calcolo doppia passata

LuaLibs/BeamLib.lua

@@ -698,19 +698,17 @@ function BeamLib.GetFaceHvRefDim( nSurfId, nFacet, b3Raw)
    local b3HV = EgtSurfTmGetFacetBBoxRef( nSurfId, nFacet, GDB_BB.STANDARD, frHV)
    local dDimH = b3HV:getDimX()
    local dDimV = b3HV:getDimY()
-
-   -- Si mantiene rettangolo minimo perchè in alcuni casi andava in collisione. Lascio il calcolo in caso si debba ripristinare.
    -- se definito grezzo (o solido), applico eventuali limiti
-   -- if b3Raw then
-   --    local dCoeffY = abs( frHV:getVersX():getY())
-   --    if dCoeffY > GEO.EPS_SMALL then
-   --       dDimH = min( dDimH, b3Raw:getDimY() / dCoeffY)
-   --    end
-   --    local dCoeffZ = abs( frHV:getVersY():getZ())
-   --    if dCoeffZ > GEO.EPS_SMALL then
-   --       dDimV = min( dDimV, b3Raw:getDimZ() / dCoeffZ)
-   --    end
-   -- end
+   if b3Raw then
+      local dCoeffY = abs( frHV:getVersX():getY())
+      if dCoeffY > GEO.EPS_SMALL then
+         dDimH = min( dDimH, b3Raw:getDimY() / dCoeffY)
+      end
+      local dCoeffZ = abs( frHV:getVersY():getZ())
+      if dCoeffZ > GEO.EPS_SMALL then
+         dDimV = min( dDimV, b3Raw:getDimZ() / dCoeffZ)
+      end
+   end
    -- restituisco i valori calcolati
    return frHV, dDimH, dDimV
 end

LuaLibs/ProcessCut.lua

@@ -379,9 +379,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
    local vCuts = {}
    local dDicingOffsetP
    local dDicingOffsetO
-   if ( ( not Proc.AdvTail) or bForceDicing) and
-        ( dCutH - 100 * GEO.EPS_SMALL > dMaxDepth - BD.CUT_EXTRA - 3 * BD.COLL_SIC or
-          dCutV - 100 * GEO.EPS_SMALL > dMaxVertDepth - BD.CUT_EXTRA - 3 * BD.COLL_SIC) then
+   if ( ( not Proc.AdvTail) or bForceDicing) and ( dCutH > dMaxDepth - BD.CUT_EXTRA - 3 * BD.COLL_SIC or dCutV > dMaxVertDepth - BD.CUT_EXTRA - 3 * BD.COLL_SIC) then
       local ptExtra, vtExtra
       local bAutoCalcSurf = true
       if Proc.AdvTail then

LuaLibs/ProcessProfCamb.lua

@@ -506,7 +506,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    -- se il chamfer non è esclusivo continuo con le altre lavorazioni
    if nChamfer < 2 then
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessProfConcave.lua

@@ -453,7 +453,7 @@ function ProcessProfConcave.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          end
       end
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessProfConvex.lua

@@ -453,7 +453,7 @@ function ProcessProfConvex.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          end
       end
       -- verifico se necessario lavorare in doppio
-      local bDouble = ( dProfDepth + BD.CUT_EXTRA > dToolMaxDepth)
+      local bDouble = ( dProfDepth + BD.CUT_EXTRA - 100 * GEO.EPS_SMALL > dToolMaxDepth)
       local dDepth = min( dToolMaxDepth, dProfDepth / 2 + BD.MILL_OVERLAP)
       -- se lavorazione da due parti, aggiungo la seconda
       local sMillingDown

LuaLibs/ProcessSplit.lua

@@ -662,7 +662,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
    local dMinTailScrapForAdditionalCuts = 10.123
    local bNeedVerticalAddedCuts = not bSplit and ( Proc.Face[1].WidthTrimmed > BD.MAX_LEN_DICE) and ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL)
    local bNeedHorizontalAddedCuts = not bSplit and not bBigSectionCut and
-                                    ( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE) + 100 * GEO.EPS_SMALL) and
+                                    ( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE)) and
                                     ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL) and
                                     dOffsL < BD.MAX_DIM_DICE
    -- dati lavorazioni sopra e sotto