- in BacthProcess (Ts7) si forza ricalcolo ad ogni check o check+generate

BatchProcess.lua

@@ -202,7 +202,7 @@ if bBtl and string.find( sTitle, 'Bar_', 1, true) and EgtExistsFile( sNgeFile) t
    EgtEraseFile( sDiffFile)
    local _, nDiff = EgtTextFileCompare( BEAM.FILE, sOriFile, ';', sDiffFile)
    -- se BTL corrente coincide con originale, salto il riprocessamento
-   if nDiff == 0 then
+   if nDiff == 0 and sFlag ~= 'CHECK' and sFlag ~= 'CHECK+GENERATE' then
       bToProcess = false
       -- se cambiata configurazione macchina da ultima elaborazione, devo riprocessare
       if EgtCompareFilesLastWriteTime( sOriFile, sMachDir .. '\\Beam\\TS3Data.lua') == -1  or

LuaLibs/ProcessHeadCut.lua

@@ -412,8 +412,7 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
                           ( b3Raw:getDimZ() > EgtIf( BD.TURN, 2 * dMaxVertDepth, dMaxVertDepth + dMaxDepth2) - 2 * BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    local bHorizCut = ( ( b3Raw:getDimY() > b3Raw:getDimZ() + 10 * GEO.EPS_SMALL or BD.TURN) and b3Raw:getDimZ() < dMaxVertDepth - BD.CUT_EXTRA)
    local bDoubleHorizCut = ( ( BD.DOWN_HEAD or BD.TURN) and not bHorizCut and b3Raw:getDimY() > 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
-   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL) and
-                      ( b3Raw:getDimY() < 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
+   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA + 10 * GEO.EPS_SMALL)
    -- verifico necessità di tagli aggiuntivi orizzontali o verticali
    local dMinOvmHeadForAddeddCuts = 10.123
    local bNeedVerticalAddedCuts = ( Proc.Face[1].WidthTrimmed > BD.MAX_LEN_DICE) and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL)

LuaLibs/ProcessLapJoint.lua

@@ -802,12 +802,6 @@ function ProcessLapJoint.IsTailFeature( Proc, b3Raw)
       ( b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.Box:getDimX() > min( BD.MAX_LEN_HTFEA, 0.8 * b3Solid:getDimX())) then
       return false
    end
-
-   -- se interessa la coda, e pezzo lungo, si sposta dopo separazione
-   if b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.AffectedFaces.Left and Proc.Fct >= 2 then
-      return true
-   end
-
    -- se una o due facce e interessa veramente la coda, allora di coda
    if Proc.Fct <= 2 then
       if Proc.Box:getMin():getX() < b3Solid:getMin():getX() + 1. then
@@ -820,6 +814,10 @@ function ProcessLapJoint.IsTailFeature( Proc, b3Raw)
    if Proc.AffectedFaces.Left and ( EgtGetInfo( Proc.Id, Q_SAW_PLUS_CHAIN, 'i') or 0) > 0 then
       return true
    end
+   -- se interessa la coda, e pezzo lungo, si sposta dopo separazione
+   if b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.AffectedFaces.Left and Proc.Fct > 2 then
+      return true
+   end
    -- deve avere la normale principale diretta verso la coda (oppure tunnel)
    Topology.Classify( Proc, b3Raw)
    local nFacInd, dElev, nFacInd2, dElev2 = BL.GetFaceWithMostAdj( Proc, nPartId)

LuaLibs/ProcessSplit.lua

@@ -634,8 +634,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
                           ( b3Raw:getDimZ() > EgtIf( BD.TURN, 2 * dMaxVertDepth,  dMaxVertDepth + dSawMaxDepth2) - 2 * BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    local bHorizCut = ( ( b3Raw:getDimY() > b3Raw:getDimZ() + 10 * GEO.EPS_SMALL or BD.TURN) and ( b3Raw:getDimZ() < dMaxVertDepth - BD.CUT_EXTRA))
    local bDoubleHorizCut = ( ( BD.DOWN_HEAD or BD.TURN) and not bHorizCut and b3Raw:getDimY() > 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
-   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL) and
-                      ( b3Raw:getDimY() < 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
+   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL)
    -- dati geometrici del taglio
    local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, 0, GDB_ID.ROOT)
    -- separazione solo se esiste grezzo successivo con pezzi o scaricabile