- in BeamExec aggiunto ritorno stato e messaggi a interfaccia per Double in tutti i casi

- In LapJoint si anticipa controllo per decidere se feature di coda

LuaLibs/BeamExec.lua

@@ -1863,10 +1863,14 @@ local function VerifyDrillMirrored( Proc, vProc, b3Raw)
             ( BD.DOWN_HEAD and AreOppositeVectorApprox( vtExtr, Y_AX())) then
             Proc.Double = 2
             Proc.MachDepthDouble = dMachiningDepth
+            Proc.MirrorCutId = ProcToDisable.CutId
+            Proc.MirrorTaskId = ProcToDisable.TaskId
             DisableOtherDrilling( ProcToDisable, vProc)
          elseif BD.DOWN_HEAD and AreSameVectorApprox( vtExtr, Z_AX()) then
             Proc.Double = 3
             Proc.MachDepthDouble = dMachiningDepth
+            Proc.MirrorCutId = ProcToDisable.CutId
+            Proc.MirrorTaskId = ProcToDisable.TaskId
             DisableOtherDrilling( ProcToDisable, vProc)
          end
       end
@@ -2173,8 +2177,14 @@ function BeamExec.ProcessFeatures()
                if not bOk then
                   nTotErr = nTotErr + 1
                   table.insert( Stats, {Err=1, Msg=sMsg, Rot=-2, CutId=Proc.CutId, TaskId=Proc.TaskId})
+                  if Proc.Double == 2 or Proc.Double == 3 then
+                     table.insert( Stats, {Err=1, Msg=sMsg, Rot=-2, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+                  end
                elseif sMsg and #sMsg > 0 then
                   table.insert( Stats, {Err=-1, Msg=sMsg, Rot=-2, CutId=Proc.CutId, TaskId=Proc.TaskId})
+                  if Proc.Double == 2 or Proc.Double == 3 then
+                     table.insert( Stats, {Err=-1, Msg=sMsg, Rot=-2, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+                  end
                else
                   table.insert( Stats, {Err=0, Msg='', Rot=-2, CutId=Proc.CutId, TaskId=Proc.TaskId})
                   if Proc.Double == 2 or Proc.Double == 3 then
@@ -2263,8 +2273,14 @@ function BeamExec.ProcessFeatures()
                if not bOk then
                   nTotErr = nTotErr + 1
                   table.insert( Stats, {Err=1, Msg=sMsg, Rot=-1, CutId=Proc.CutId, TaskId=Proc.TaskId})
+                  if Proc.Double == 2 or Proc.Double == 3 then
+                     table.insert( Stats, {Err=1, Msg=sMsg, Rot=-1, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+                  end
                elseif sMsg and #sMsg > 0 then
                   table.insert( Stats, {Err=-1, Msg=sMsg, Rot=-1, CutId=Proc.CutId, TaskId=Proc.TaskId})
+                  if Proc.Double == 2 or Proc.Double == 3 then
+                     table.insert( Stats, {Err=-1, Msg=sMsg, Rot=-1, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+                  end
                else
                   table.insert( Stats, {Err=0, Msg='', Rot=-1, CutId=Proc.CutId, TaskId=Proc.TaskId})
                   if Proc.Double == 2 or Proc.Double == 3 then
@@ -2341,8 +2357,14 @@ function BeamExec.ProcessFeatures()
             if not bOk then
                nTotErr = nTotErr + 1
                table.insert( Stats, {Err=1, Msg=sMsg, Rot=0, CutId=Proc.CutId, TaskId=Proc.TaskId})
+               if Proc.Double == 2 or Proc.Double == 3 then
+                  table.insert( Stats, {Err=1, Msg=sMsg, Rot=0, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+               end
             elseif sMsg and #sMsg > 0 then
                table.insert( Stats, {Err=-1, Msg=sMsg, Rot=0, CutId=Proc.CutId, TaskId=Proc.TaskId})
+               if Proc.Double == 2 or Proc.Double == 3 then
+                  table.insert( Stats, {Err=-1, Msg=sMsg, Rot=0, CutId=Proc.MirrorCutId, TaskId=Proc.MirrorTaskId})
+               end
             else
                table.insert( Stats, {Err=0, Msg='', Rot=0, CutId=Proc.CutId, TaskId=Proc.TaskId})
                if Proc.Double == 2 or Proc.Double == 3 then

LuaLibs/ProcessCut.lua

@@ -92,7 +92,7 @@ function ProcessCut.Classify( Proc, b3Raw)
       -- calcolo l'ingombro orizzontale della faccia
       local _, DimH, DimV = BL.GetFaceHvRefDim( Proc.Id, 0)
       -- confronto questo ingombro con il doppio della massima dimensione del DiceCut (impossibile lavorare sotto da sopra se più di 2 tagli oppure se tipo PF, taglio inclinato in Y e non taglio singolo orizzontale)
-      if DimH > 2 * BD.MAX_DIM_DICE  or ( BD.C_SIMM and abs( vtN:getY()) > 0.1 and dMaxMat < DimH + BD.CUT_EXTRA) then
+      if DimH > 2 * BD.MAX_DIM_DICE  or ( BD.C_SIMM and ( abs( vtN:getY()) > 0.1 or bDownCut) and dMaxMat < DimH + BD.CUT_EXTRA) then
          return true, true
       end
    end

LuaLibs/ProcessHeadCut.lua

@@ -412,7 +412,8 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
                           ( b3Raw:getDimZ() > EgtIf( BD.TURN, 2 * dMaxVertDepth, dMaxVertDepth + dMaxDepth2) - 2 * BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    local bHorizCut = ( ( b3Raw:getDimY() > b3Raw:getDimZ() + 10 * GEO.EPS_SMALL or BD.TURN) and b3Raw:getDimZ() < dMaxVertDepth - BD.CUT_EXTRA)
    local bDoubleHorizCut = ( ( BD.DOWN_HEAD or BD.TURN) and not bHorizCut and b3Raw:getDimY() > 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
-   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA + 10 * GEO.EPS_SMALL)
+   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL) and
+                      ( b3Raw:getDimY() < 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    -- verifico necessità di tagli aggiuntivi orizzontali o verticali
    local dMinOvmHeadForAddeddCuts = 10.123
    local bNeedVerticalAddedCuts = ( Proc.Face[1].WidthTrimmed > BD.MAX_LEN_DICE) and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL)

LuaLibs/ProcessLapJoint.lua

@@ -802,6 +802,12 @@ function ProcessLapJoint.IsTailFeature( Proc, b3Raw)
       ( b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.Box:getDimX() > min( BD.MAX_LEN_HTFEA, 0.8 * b3Solid:getDimX())) then
       return false
    end
+
+   -- se interessa la coda, e pezzo lungo, si sposta dopo separazione
+   if b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.AffectedFaces.Left and Proc.Fct >= 2 then
+      return true
+   end
+
    -- se una o due facce e interessa veramente la coda, allora di coda
    if Proc.Fct <= 2 then
       if Proc.Box:getMin():getX() < b3Solid:getMin():getX() + 1. then
@@ -814,10 +820,6 @@ function ProcessLapJoint.IsTailFeature( Proc, b3Raw)
    if Proc.AffectedFaces.Left and ( EgtGetInfo( Proc.Id, Q_SAW_PLUS_CHAIN, 'i') or 0) > 0 then
       return true
    end
-   -- se interessa la coda, e pezzo lungo, si sposta dopo separazione
-   if b3Solid:getDimX() > BD.LEN_SHORT_PART and Proc.AffectedFaces.Left and Proc.Fct > 2 then
-      return true
-   end
    -- deve avere la normale principale diretta verso la coda (oppure tunnel)
    Topology.Classify( Proc, b3Raw)
    local nFacInd, dElev, nFacInd2, dElev2 = BL.GetFaceWithMostAdj( Proc, nPartId)

LuaLibs/ProcessSplit.lua

@@ -634,7 +634,8 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
                           ( b3Raw:getDimZ() > EgtIf( BD.TURN, 2 * dMaxVertDepth,  dMaxVertDepth + dSawMaxDepth2) - 2 * BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    local bHorizCut = ( ( b3Raw:getDimY() > b3Raw:getDimZ() + 10 * GEO.EPS_SMALL or BD.TURN) and ( b3Raw:getDimZ() < dMaxVertDepth - BD.CUT_EXTRA))
    local bDoubleHorizCut = ( ( BD.DOWN_HEAD or BD.TURN) and not bHorizCut and b3Raw:getDimY() > 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
-   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL)
+   local bDoubleCut = ( not bHorizCut and not bDoubleHorizCut and b3Raw:getDimY() > dDimYRef - BD.CUT_EXTRA  + 10 * GEO.EPS_SMALL) and
+                      ( b3Raw:getDimY() < 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL)
    -- dati geometrici del taglio
    local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, 0, GDB_ID.ROOT)
    -- separazione solo se esiste grezzo successivo con pezzi o scaricabile