Merge remote-tracking branch 'origin/master' into MultipleChainsawsAndMachiningLibImprovements

- Nello split con sega a catena ora si cerca di preferenza una lavorazione di tipo 'SawingForSplitting'. Se non trovata si cerca il tipo 'Sawing' come in precedenza.
- In split con sega a catena aggiunta estensione start/end del percorso se utensile lungo, per evitare collisioni con il pezzo durante rotazione.

BatchProcess.lua

@@ -357,7 +357,7 @@ if bToProcess then
    local dOvmHead = vBeam[1].PosX or 0
    
    -- Sistemo le travi nel grezzo
-   local bPbOk, sPbErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam)
+   local bPbOk, sPbErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, nil, vBeam)
    if not bPbOk then
       BEAM.ERR = 18
       BEAM.MSG = sPbErr

BatchProcessNew.lua

@@ -405,7 +405,7 @@ if bToProcess then
       end
       
       -- Sistemo le travi nel grezzo
-      local bPbOk, sPbErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam, BEAM.FLAG == 6)
+      local bPbOk, sPbErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, nil, vBeam, BEAM.FLAG == 6)
       if not bPbOk then
          BEAM.ERR = 18
          BEAM.MSG = sPbErr

LuaLibs/BeamExec.lua

@@ -517,12 +517,15 @@ local function VerifyBigSectionCut( dRawW, dRawH)
 end
 
 -------------------------------------------------------------------------------------------------------------
-function BeamExec.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam, bMachGroupOk)
+function BeamExec.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, dOvmMid, vBeam, bMachGroupOk)
 
    -- default per nuove costanti qualora non definite
    BD.OVM_BLADE_HBEAM = ( BD.OVM_BLADE_HBEAM or 11)
    BD.OVM_CHAIN_HBEAM = ( BD.OVM_CHAIN_HBEAM or 8)
 
+   -- sovramateriale intermedio nullo se non definito
+   dOvmMid = ( dOvmMid or 0)
+
    -- Determinazione minimo grezzo scaricabile
    BeamExec.CalcMinUnloadableRaw( dRawW, dRawH)
 
@@ -579,8 +582,12 @@ function BeamExec.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam, bMachGroup
          local lastB3Solid = nil
          local dOffset = dOvmHead
          if i > 1 then
-            lastB3Solid = vBeam[i-1].Box
+            if vBeam[i].PosX then
-            dOffset = vBeam[i].PosX - vBeam[i-1].PosX - lastB3Solid:getDimX()
+               lastB3Solid = vBeam[i-1].Box
+               dOffset = vBeam[i].PosX - vBeam[i-1].PosX - lastB3Solid:getDimX()
+            else
+               dOffset = dOvmMid
+            end
          end
          -- analizzo le features per valutare l'esistenza di feature head/tail che renderebbero inutili le rispettive finiture o di tagli di testa/coda sostituiti da cui leggere il parametro Q05
          local vProc = CollectFeatures( Pz, b3Solid, 0)
@@ -615,8 +622,12 @@ function BeamExec.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam, bMachGroup
           ( abs( PartHeight - dRawW) < 100 * GEO.EPS_SMALL  and  abs( PartWidth - dRawH) < 100 * GEO.EPS_SMALL))  and
          NextLen + DeltaE >= 0 then
          -- eventuale sovramateriale di testa
-         if i > 1 and vBeam[i].PosX then
+         if i > 1 then
-            DeltaS = max( vBeam[i].PosX - ( dRawL - Len), DeltaSMin)
+            if vBeam[i].PosX then
+               DeltaS = max( vBeam[i].PosX - ( dRawL - Len), DeltaSMin)
+            else
+               DeltaS = max( dOvmMid - DeltaE, 0)
+            end
          end
          -- dimensioni del grezzo
          local CrawLen = min( PartLen + DeltaS + DeltaE, Len)

LuaLibs/DiceCut.lua

@@ -1,4 +1,4 @@
--- DiceCut.lua by Egaltech s.r.l. 2023/06/29
+-- DiceCut.lua by Egaltech s.r.l. 2024/01/23
 -- Gestione dei piano paralleli nei tagli lunghi: equidistanziamento dei piani paralleli
 
 -- Tabella per definizione modulo
@@ -396,7 +396,7 @@ function DiceCut.GetDice( nParent, BBoxRawPart, ptCPlanes, vtNPlanes, bGetOrtoPl
    end
    local dElevP = DistanzaMassima( nParent, ptCPlanes, vtNPlanes, ptCBond, vtNBond, BBoxRawPart, TBoxPoint)
    local dElevO
-   if ptCBond and vtNBond then
+   if ptCBond and vtNBond and not AreOppositeVectorApprox( vtNBond, vtNPlanes) then
       dElevO = DistanzaMassima( nParent, ptCBond, vtNBond, ptCPlanes, vtNPlanes, BBoxRawPart, TBoxPoint)    
    end
 

LuaLibs/MachiningLib.lua

@@ -9,6 +9,9 @@
 -- 2023/07/28 Aggiunta gestione del tipo di foratura "Drill_AT".
 -- 2023/11/06 Migliorie e correzioni alle forature con AngularTransmission ("_AT").
 -- 2024/01/18 In FindSawing aggiunto il parametro opzionale dDepth.
+-- 2024/01/19 In FindSawing aggiunto parametro opzionale bConsiderCSimmEncumberance per considerare l'ingombro dell'asse C nel massimo materiale (default false).
+-- 2024/01/23 Nella GetMachinings vengono ora raccolti i parametri utensile necessari per i VerifyTool, scritti direttamente nella tabella Machining.Tool.
+--            Le lavorazioni possono essere ora ordinate per dimensioni utensile (Longest, Shortest, Biggest, Smallest) se passato l'apposito parametro SortingCriterion in FindMachining. Al momento implementato solo per FindSawing.
 
 -- Tabella per definizione modulo
 local MachiningLib = {}
@@ -104,112 +107,192 @@ local function SetNextMachining( sToolName, nHead, bFixed)
 end
    
 ---------------------------------------------------------------------
-local function SetCurrMachiningAndTool( sMachName)
+local function SetCurrMachiningAndTool( Machining)
-   if not EgtMdbSetCurrMachining( sMachName) then return false end
+   EgtMdbSetCurrMachining( Machining.Name)
-   local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+   EgtTdbSetCurrTool( Machining.Tool.Name)
-   local sTool = EgtTdbGetToolFromUUID( sTuuid)
+   local bActive = EgtFindToolInCurrSetup( Machining.Tool.Name)
-   if not sTool then return false end
-   if not EgtTdbSetCurrTool( sTool) then return false end
-   local bActive = EgtFindToolInCurrSetup( sTool)
    local sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
    local nHead = tonumber( sHead:sub( 2, #sHead))
    local bH2 = ( nHead >= 21 and nHead <= 29)
    local bH3 = ( nHead >= 31 and nHead <= 39)
    local bFixed = ( vFixedHeads[nHead])
-   return bActive, sTool, bH2, bFixed, bH3
+   return bActive, Machining.Tool.Name, bH2, bFixed, bH3
 end
 
 ---------------------------------------------------------------------
-function VerifyDrill( dDiam, dDepth, bH2)
+function VerifyDrill( Machining, dDiam, dDepth, bH2)
-   local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+   local dFreeLen = Machining.Tool.Length - Machining.Tool.ToolHolderLength - EgtMdbGetGeneralParam( MCH_GP.MAXDEPTHSAFE)
-   local dTMaxMat = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT)
+   if Machining.Tool.Diameter < dDiam + 10 * GEO.EPS_SMALL and
-   local dMaxToolLength = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      Machining.Tool.Diameter > dDiam - BD.DRILL_TOL - 10 * GEO.EPS_SMALL and
-   local dToolDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+      ( not dDepth or Machining.Tool.MaxMat > dDepth - GEO.EPS_SMALL) then
-   local dDiamTh = EgtTdbGetCurrToolThDiam()
+      return true, { TMaxMat = Machining.Tool.MaxMat, MaxToolLength = Machining.Tool.TotalLength, ToolDiam = Machining.Tool.Diameter, DiamTh = Machining.Tool.ToolHolderDiameter, FreeLen = dFreeLen, H2 = bH2}
-   local dLenTh = 72
-   if EgtTdbGetCurrToolThLength then dLenTh = EgtTdbGetCurrToolThLength() end
-   local dFreeLen = EgtTdbGetCurrToolParam( MCH_TP.LEN) - dLenTh - EgtMdbGetGeneralParam( MCH_GP.MAXDEPTHSAFE)
-   if dTDiam < dDiam + 10 * GEO.EPS_SMALL and
-      dTDiam > dDiam - BD.DRILL_TOL - 10 * GEO.EPS_SMALL and
-      ( not dDepth or dTMaxMat > dDepth - GEO.EPS_SMALL) then
-      return true, { TMaxMat = dTMaxMat, MaxToolLength = dMaxToolLength, ToolDiam = dToolDiam, DiamTh = dDiamTh, FreeLen = dFreeLen, H2 = bH2}
    end
 end
 
 ---------------------------------------------------------------------
-function VerifyDrillPocket( dDiam, dDepth, bH2)
+function VerifyDrillPocket( Machining, dDiam, dDepth, bH2)
-   local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+   if Machining.Tool.Diameter < dDiam - 10 * GEO.EPS_SMALL and
-   local dTMaxDepth = EgtTdbGetCurrToolMaxDepth()
+      ( not dDepth or Machining.Tool.MaxMat > dDepth - GEO.EPS_SMALL) then
-   local dMaxToolLength = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      return true, { TMaxDepth = Machining.Tool.MaxMat, MaxToolLength = Machining.Tool.TotalLength, ToolDiam = Machining.Tool.Diameter, DiamTh = Machining.Tool.ToolHolderDiameter, FreeLen = Machining.Tool.MaxMat, H2 = bH2}
-   local dToolDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
-   local dDiamTh = EgtTdbGetCurrToolThDiam()
-   local dFreeLen = dTMaxDepth
-   if dTDiam < dDiam - 10 * GEO.EPS_SMALL and
-      ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) then
-      return true, { TMaxDepth = dTMaxDepth, MaxToolLength = dMaxToolLength, ToolDiam = dToolDiam, DiamTh = dDiamTh, FreeLen = dFreeLen, H2 = bH2}
    end
 end
 
 ---------------------------------------------------------------------
-function VerifyMill( dDepth, sTuuidMstr, dMaxDiam, dMaxTotLen, bH2)
+function VerifyMill( Machining, dDepth, sTuuidMstr, dMaxDiam, dMaxTotLen, bH2)
-   local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+   if ( not dDepth or Machining.Tool.MaxMat > dDepth - GEO.EPS_SMALL) and
-   local dTMaxDepth = EgtTdbGetCurrToolMaxDepth()
+      ( not sTuuidMstr or sTuuidMstr == Machining.Tool.UUID) and
-   local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+      ( not dMaxDiam or Machining.Tool.Diameter < dMaxDiam + GEO.EPS_SMALL) and
-   local dTTotLen = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      ( not dMaxTotLen or Machining.Tool.TotalLength < dMaxTotLen + GEO.EPS_SMALL) then
-   if ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) and
+      return true, { TMaxDepth = Machining.Tool.MaxMat, TDiam = Machining.Tool.Diameter, H2 = bH2}
-      ( not sTuuidMstr or sTuuidMstr == sTuuid) and
-      ( not dMaxDiam or dTDiam < dMaxDiam + GEO.EPS_SMALL) and
-      ( not dMaxTotLen or dTTotLen < dMaxTotLen + GEO.EPS_SMALL) then
-      return true, { TMaxDepth = dTMaxDepth, TDiam = dTDiam, H2 = bH2}
    end
 end
 
 ---------------------------------------------------------------------
-function VerifyPocket( dMaxDiam, dDepth, dMaxTotLen, bH2)
+function VerifyPocket( Machining, dMaxDiam, dDepth, dMaxTotLen, bH2)
-   local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+   if ( not dMaxDiam or Machining.Tool.Diameter < dMaxDiam + GEO.EPS_SMALL) and
-   local dTMaxDepth = EgtTdbGetCurrToolMaxDepth()
+      ( not dDepth or Machining.Tool.MaxMat > dDepth - GEO.EPS_SMALL) and
-   local dTTotLen = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      ( not dMaxTotLen or Machining.Tool.TotalLength < dMaxTotLen + GEO.EPS_SMALL) then
-   if ( not dMaxDiam or dTDiam < dMaxDiam + GEO.EPS_SMALL) and
+      return true, { TDiam = Machining.Tool.Diameter, TMaxDepth = Machining.Tool.MaxMat, H2 = bH2}
-      ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) and
-      ( not dMaxTotLen or dTTotLen < dMaxTotLen + GEO.EPS_SMALL) then
-      return true, { TDiam = dTDiam, TMaxDepth = dTMaxDepth, H2 = bH2}
    end
 end
 
 ---------------------------------------------------------------------
-function VerifyTool( MachiningType, sType, Params, bH2)
+function VerifyChainSaw( Machining, dDepth, CSimmEncumberance, bH2)
+   -- riduco il massimo materiale dell'ingombro asse C. Se non richiesto, arriverà un valore di CSimmEncumberance nullo
+   Machining.Tool.MaxMat = min( Machining.Tool.MaxMat, Machining.Tool.TotalLength - CSimmEncumberance)
+   if not dDepth or Machining.Tool.MaxMat > dDepth - GEO.EPS_SMALL then
+      return true, { H2 = bH2}
+   end
+end
+
+---------------------------------------------------------------------
+function VerifyTool( Machining, MachiningType, Params, bH2)
    if MachiningType == MCH_MY.DRILLING then
-      if EgtStartsWith( sType, 'Drill') or EgtStartsWith( sType, 'AngleDrill') then
+      if Machining.SubType == 'Drill' or Machining.SubType == 'AngleDrill' then
-         return VerifyDrill( Params.Diam, Params.Depth, bH2)
+         return VerifyDrill( Machining, Params.Diam, Params.Depth, bH2)
-      elseif EgtStartsWith( sType, 'Pocket') then
+      elseif Machining.SubType == 'DrillPocket' then
-         return VerifyDrillPocket( Params.Diam, Params.Depth, bH2)
+         return VerifyDrillPocket( Machining, Params.Diam, Params.Depth, bH2)
       end
    elseif MachiningType == MCH_MY.SAWING then
       return true, { H2 = bH2}
    elseif MachiningType == MCH_MY.MILLING then
-      return VerifyMill( Params.Depth, Params.TuuidMstr, Params.MaxDiam, Params.MaxTotLen, bH2)
+      return VerifyMill( Machining, Params.Depth, Params.TuuidMstr, Params.MaxDiam, Params.MaxTotLen, bH2)
    elseif MachiningType == MCH_MY.POCKETING then
-      return VerifyPocket( Params.MaxDiam, Params.Depth, Params.MaxTotLen, bH2)
+      return VerifyPocket( Machining, Params.MaxDiam, Params.Depth, Params.MaxTotLen, bH2)
    elseif MachiningType == MCH_MY.MORTISING then
-      return true, { H2 = bH2}
+      return VerifyChainSaw( Machining, Params.Depth, Params.CSimmEncumberance, bH2)
    else
       return false
    end
 end
 
 ---------------------------------------------------------------------
-function GetMachinings( MachiningType)
+function GetMachinings( MachiningType, sType)
+   local Machinings
+   -- leggo le lavorazioni disponibili
    if MachiningType == MCH_MY.DRILLING then
-      return Drillings
+      Machinings = Drillings
    elseif MachiningType == MCH_MY.SAWING then
-      return Cuttings
+      Machinings = Cuttings
    elseif MachiningType == MCH_MY.MILLING then
-      return Millings
+      Machinings = Millings
    elseif MachiningType == MCH_MY.POCKETING then
-      return Pocketings
+      Machinings = Pocketings
    elseif MachiningType == MCH_MY.MORTISING then
-       return Sawings
+      Machinings = Sawings
    end
+   -- scrivo i parametri utensile nella lavorazione
+   local validMachinings = {}
+   for i = 1, #Machinings do
+      local Machining = Machinings[i]
+      if EgtMdbSetCurrMachining( Machining.Name) then
+         Machining.Tool = {}
+         Machining.Tool.UUID = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+         Machining.Tool.Name = EgtTdbGetToolFromUUID( Machining.Tool.UUID)
+         if Machining.Tool.Name then
+            if EgtTdbSetCurrTool( Machining.Tool.Name) then
+               table.insert( validMachinings, Machining)
+               if ( MachiningType == MCH_MY.MILLING) or ( MachiningType == MCH_MY.POCKETING) or ( MachiningType == MCH_MY.DRILLING and EgtStartsWith( sType, 'Pocket')) then
+                  Machining.Tool.MaxMat = EgtTdbGetCurrToolMaxDepth()
+               else
+                  Machining.Tool.MaxMat = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT)
+               end
+               if MachiningType == MCH_MY.DRILLING then
+                  if EgtStartsWith( Machining.Type, 'Drill') then
+                     Machining.SubType = 'Drill'
+                  elseif EgtStartsWith( Machining.Type, 'AngleDrill') then
+                     Machining.SubType = 'AngleDrill'
+                  elseif EgtStartsWith( Machining.Type, 'Pocket') then
+                     Machining.SubType = 'DrillPocket'
+                  end
+               end
+               Machining.Tool.Diameter = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
+               Machining.Tool.Length = EgtTdbGetCurrToolParam( MCH_TP.LEN)
+               Machining.Tool.TotalLength = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+               Machining.Tool.ToolHolderDiameter = EgtTdbGetCurrToolThDiam()
+               Machining.Tool.ToolHolderLength = EgtTdbGetCurrToolThLength() or 72
+            end
+         end
+      end
+   end
+   -- ritorno la lista delle sole lavorazioni valide
+   return validMachinings
+end
+
+---------------------------------------------------------------------
+---restituisce la lista delle lavorazioni ordinata secondo il criterio *sCriterion*
+---@param Machinings table lista della lavorazioni da riordinare
+---@param sCriterion string criterio di ordinamento ('Longest', 'Shortest', 'Biggest', 'Smallest')
+function ReorderMachinings( Machinings, sCriterion)
+   
+   -- funzioni di ordinamento
+   local function SortMachiningsByLongestTool( Machining1, Machining2)
+      if Machining1.Tool.MaxMat > Machining2.Tool.MaxMat + 10 * GEO.EPS_SMALL then
+         return true
+      else
+         return false
+      end
+   end
+   local function SortMachiningsByShortestTool( Machining1, Machining2)
+      if Machining1.Tool.MaxMat < Machining2.Tool.MaxMat - 10 * GEO.EPS_SMALL then
+         return true
+      else
+         return false
+      end
+   end
+   local function SortMachiningsByBiggestTool( Machining1, Machining2)
+      if Machining1.Tool.Diameter > Machining2.Tool.Diameter + 10 * GEO.EPS_SMALL then
+         return true
+      else
+         return false
+      end
+   end
+   local function SortMachiningsBySmallestTool( Machining1, Machining2)
+      if Machining1.Tool.Diameter < Machining2.Tool.Diameter - 10 * GEO.EPS_SMALL then
+         return true
+      else
+         return false
+      end
+   end
+
+   -- ordinamento in base al criterio
+   -- ordine di default, ossia quello che arriva dal database
+   if not sCriterion then
+      return
+   -- prima gli utensili più lunghi
+   elseif sCriterion == 'Longest' then
+      table.sort( Machinings, SortMachiningsByLongestTool)
+   -- prima gli utensili più corti
+   elseif sCriterion == 'Shortest' then
+      table.sort( Machinings, SortMachiningsByShortestTool)
+   -- prima gli utensili con diametro più grande
+   elseif sCriterion == 'Biggest' then
+      table.sort( Machinings, SortMachiningsByBiggestTool)
+   -- prima gli utensili con diametro più piccolo
+   elseif sCriterion == 'Smallest' then
+      table.sort( Machinings, SortMachiningsBySmallestTool)
+   end
+
 end
 
 ---------------------------------------------------------------------
@@ -229,7 +312,7 @@ function ReturnParams( MachiningType, MachiningName, sType, ToolParams)
 end
 
 ---------------------------------------------------------------------
-local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead, bExcludeH2, bExcludeH3)
+local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead, bExcludeH2, bExcludeH3, sSortingCriterion)
    if bTopHead == nil and bDownHead == nil then
       bTopHead = true
       bDownHead = false
@@ -256,11 +339,12 @@ local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead,
    local sH2Mach = ''
    local sH2Tool = ''
    local sH2Param
-   -- ricerca sulle forature, dal diametro maggiore al minore
+   local Machinings = GetMachinings( MachiningType, sType)
-   local Machinings = GetMachinings( MachiningType)
+   ReorderMachinings( Machinings, sSortingCriterion)
    local ForStart = 1
    local ForEnd = #Machinings
    local ForStep = 1
+   -- le forature vanno scorse dal diametro maggiore al minore
    if MachiningType == MCH_MY.DRILLING then
       ForStart = #Machinings
       ForEnd = 1
@@ -290,9 +374,9 @@ local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead,
          _, sMachiningType = EgtEndsWith( Machining.Type, '_H2')
       end
       -- recupero dati utensile
-      local bToolActive, sToolName, bH2, bFixed, bH3 = SetCurrMachiningAndTool( Machining.Name)
+      local bToolActive, sToolName, bH2, bFixed, bH3 = SetCurrMachiningAndTool( Machining)
       if Machining.On and sMachiningType == sType and bToolActive and ( not bH2 or bH2 == not bExcludeH2) and ( not bH3 or bH3 == not bExcludeH3) then
-         local bOk, ToolParams = VerifyTool( MachiningType, sType, Params, bH2)
+         local bOk, ToolParams = VerifyTool( Machining, MachiningType, Params, bH2)
          if bOk then
             if MachineHeadUse == ONE_HEAD then
                SetNextMachining( sToolName, 1, bFixed)
@@ -411,8 +495,9 @@ function MachiningLib.FindPocketing( sType, dMaxDiam, dDepth, dMaxTotLen, bTopHe
 end
 
 ---------------------------------------------------------------------
-function MachiningLib.FindSawing( sType, dDepth)
+function MachiningLib.FindSawing( sType, dDepth, bConsiderCSimmEncumberance, sSortingCriterion)
-   return FindMachining( MCH_MY.MORTISING, sType, { Depth = dDepth})
+   if not BD.C_SIMM_ENC then BD.C_SIMM_ENC = EgtIf( BD.C_SIMM, 180, 90) end
+   return FindMachining( MCH_MY.MORTISING, sType, { Depth = dDepth, CSimmEncumberance = EgtIf( bConsiderCSimmEncumberance, BD.C_SIMM_ENC, 0)}, nil, nil, nil, nil, sSortingCriterion)
 end
 
 -------------------------------------------------------------------------------------------------------------

LuaLibs/ProcessHeadCut.lua

@@ -10,6 +10,7 @@
 -- 2023/08/02 Corretto calcolo allungamenti/accorciamenti pezzi alti per contemplare anche taglio singolo
 -- 2023/10/17 Corretto calcolo allungamenti/accorciamenti per evitare lunghezze del percorso negative
 -- 2024/01/18 Gestiti tagli verticali aggiuntivi per travi larghe.
+-- 2024/01/22 Nei tagli verticali aggiuntivi si usa ora BD.MAX_LEN_DICE come dimensione (era BD.MAX_DIM_DICE).
 
 -- Tabella per definizione modulo
 local ProcessHeadCut = {}
@@ -157,7 +158,7 @@ end
 -- tagli verticali aggiuntivi
 local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw )
    local _, dimH = BL.GetFaceHvRefDim( Proc.Id, 0, b3Raw)
-   local nVerticalCuts = ceil( dimH / ( BD.MAX_DIM_DICE)) - 1
+   local nVerticalCuts = ceil( dimH / ( BD.MAX_LEN_DICE)) - 1
    local dVerticalSliceHeight = dimH / ( nVerticalCuts + 1)
    -- recupero il diametro dell'utensile
    local dSawDiam = 400

LuaLibs/ProcessLapJoint.lua

@@ -88,6 +88,7 @@
 -- 2023/12/01 In MakeMoreFaces, nelle OpenPocket, ammesso utensile con diametro fino a 3 volte la dimensione della tasca (era 2).
 -- 2023/12/06 In VerifySideMillAsSaw, se SIDEDEPTH non definita, viene calcolata.
 -- 2024/01/18 Implementata GetBlockedAxis che gestisce gli assi bloccati per tutti i tipi di utensile.
+-- 2024/01/22 Implementata gestione seghe a catena multiple.
 
 -- Tabella per definizione modulo
 local ProcessLapJoint = {}
@@ -310,10 +311,15 @@ local function TestElleShape4( Proc)
 end
 
 ---------------------------------------------------------------------
-local function VerifyChainSaw( Proc, dMinDim, dMaxDim)
+local function VerifyChainSaw( Proc, dMinDim, dMaxDim, dDepth)
    local bUseChainSaw = false
    local sMchFind = 'Sawing'
-   local sSawing = ML.FindSawing( sMchFind)
+   -- prendo la prima sega a catena lunga a sufficienza
+   local sSawing = ML.FindSawing( sMchFind, dDepth, true)
+   -- se non trovo alcuna sega a catena lunga a sufficienza, accetto di non arrivare sul fondo della tasca
+   if not sSawing then
+      sSawing = ML.FindSawing( sMchFind, nil, nil, 'Longest')
+   end
    local dMaxMat = 0
    local dSawCornerRad = 0
    local dSawThick = 0
@@ -2697,6 +2703,7 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
          if nOk < 0 then return false, sErr end
       end
    end
+   if not dDepth then dDepth = dElev end
    -- Recupero le facce adiacenti alla principale
    local vAdj = EgtSurfTmFacetAdjacencies( Proc.Id, nFacInd)[1]
    if not vAdj or #vAdj == 0 then
@@ -2830,7 +2837,12 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
    -- altrimenti con sega a catena
    else
       -- Recupero la lavorazione
-      local sSawing = ML.FindSawing( 'Sawing')
+      local sSawing = ML.FindSawing( 'Sawing', dDepth, true)
+      -- se non trovo alcuna sega a catena lunga a sufficienza, accetto di non arrivare sul fondo della tasca
+      if not sSawing then
+         sSawing = ML.FindSawing( 'Sawing', nil, nil, 'Longest')
+      end
+      -- se non trova una lavorazione di sawing esco
       if not sSawing then
          local sErr = 'Error : Sawing not found in library'
          EgtOutLog( sErr)
@@ -2948,7 +2960,7 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
       -- altrimenti sega a catena di fianco 
       else
          -- verifico se posso farlo con la sega-catena
-         local bMakeChainSaw, sSawing2, dMaxMat2, dSawCornerRad2, dSawThick2 = VerifyChainSaw( Proc, dDimMin, dDimMax)
+         local bMakeChainSaw, sSawing2, dMaxMat2, dSawCornerRad2, dSawThick2 = VerifyChainSaw( Proc, dDimMin, dDimMax, dDepth)
          if bMakeChainSaw then
             -- Calcolo normale faccia da lavorare
             local vtNL = EgtSurfTmFacetNormVersor( Proc.Id, nLundIdFace, GDB_ID.ROOT) 
@@ -4541,7 +4553,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
       -- Se la svuotatura precedente non è stata fatta e chamfer non è mutuamente esclusivo provo con la sega-catena
       if bTryWithBlades and nChamfer < 2 then
          -- verifico se posso farlo con la sega-catena
-         local bMakeChainSaw, sSawing, dMaxMat, dSawCornerRad, dSawThick = VerifyChainSaw( Proc, dDimMin, dDimMax)
+         local bMakeChainSaw, sSawing, dMaxMat, dSawCornerRad, dSawThick = VerifyChainSaw( Proc, dDimMin, dDimMax, dDepth)
          if bMakeChainSaw then
             -- Ricalcolo l'affondamento tenendo conto di eventuale inclinazione
             local dSlDepth

LuaLibs/ProcessLongCut.lua

@@ -33,6 +33,7 @@
 -- 2023/10/24 Migliorata spezzatura taglio passante con due spezzoni
 -- 2023/11/30 Calcolo elevazione velocizzato e centralizzato tramite la funzione GetFaceElevation.
 -- 2024/01/18 Implementata GetBlockedAxis che gestisce gli assi bloccati per tutti i tipi di utensile.
+-- 2024/01/22 Implementata gestione seghe a catena multiple.
 
 -- Tabella per definizione modulo
 local ProcessLongCut = {}
@@ -500,7 +501,11 @@ end
 -- lavorazione faccia laterale con sega a catena
 local function MakeSideFaceByChainSaw( nSurfId, dDepth, dOffs, dSal, dEal, bShortenStart, bShortenEnd)
    -- Recupero i dati dell'utensile
-   local sSawing = ML.FindSawing( 'Sawing')
+   local sSawing = ML.FindSawing( 'Sawing', dDepth, true)
+   -- se non trovo alcuna sega a catena lunga a sufficienza, accetto di non arrivare sul fondo
+   if not sSawing then
+      sSawing = ML.FindSawing( 'Sawing', nil, nil, 'Longest')
+   end
    local dMaxMat = 0
    local dSawCornerRad = 0
    local dSawThick = 0

LuaLibs/ProcessSplit.lua

@@ -17,6 +17,9 @@
 -- 2024/01/18 Gestita lama con aggregato con asse bloccato per massimizzare capacità di taglio verticale, se da sotto
 --            Implementato split per pezzi molto alti con mix sega a catena + lama
 --            Implementata GetBlockedAxis che gestisce gli assi bloccati per tutti i tipi di utensile.
+-- 2024/01/22 Nei tagli verticali aggiuntivi si usa ora BD.MAX_LEN_DICE come dimensione (era BD.MAX_DIM_DICE).
+-- 2024/01/23 Nello split con sega a catena ora si cerca di preferenza una lavorazione di tipo 'SawingForSplitting'. Se non trovata si cerca il tipo 'Sawing' come in precedenza.
+--            In split con sega a catena aggiunta estensione start/end del percorso se utensile lungo, per evitare collisioni con il pezzo durante rotazione.
 
 -- Tabella per definizione modulo
 local ProcessSplit = {}
@@ -162,9 +165,8 @@ end
 
 ---------------------------------------------------------------------
 -- lavorazione con sega a catena per sezioni alte e larghe
-local function MakeSplitByChainSaw( nSurfId, nFaceUse, dDepth, sNotes, dOffs)
+local function MakeSplitByChainSaw( nSurfId, sSawing, nFaceUse, dDepth, sNotes, dOffs, bExtendStartEnd)
    -- Recupero i dati dell'utensile
-   local sSawing = ML.FindSawing( 'Sawing')
    local dMaxMat = 0
    local dSawCornerRad = 0
    local dSawThick = 0
@@ -199,14 +201,20 @@ local function MakeSplitByChainSaw( nSurfId, nFaceUse, dDepth, sNotes, dOffs)
    EgtSetMachiningParam( MCH_MP.FACEUSE, nFaceUse)
    -- imposto angolo 3° asse rot
    EgtSetMachiningParam( MCH_MP.BLOCKEDAXIS, BL.GetBlockedAxis( sSawing, 'perpendicular'))
-   local _, vtN = EgtSurfTmFacetCenter( nSurfId, 0, GDB_ID.ROOT)
+   local vtN = EgtSurfTmFacetNormVersor( nSurfId, 0, GDB_ID.ROOT)
    local vtOrtho = BL.GetVersRef( nFaceUse)
    EgtSetMachiningParam( MCH_MP.INITANGS, BL.GetChainSawInitAngs( vtN, vtOrtho, 1))
    -- imposto offset radiale per mantenere il materiale in coda per la finitura
    EgtSetMachiningParam( MCH_MP.OFFSR, dOffs)
-   -- imposto allungamento percorso iniziale e finale a zero
+   -- imposto eventuale allungamento percorso iniziale
-   EgtSetMachiningParam( MCH_MP.STARTADDLEN, 0)
+   local dStartAddLen = 0
-   EgtSetMachiningParam( MCH_MP.ENDADDLEN, 0)
+   local dEndAddLen = 0
+   if bExtendStartEnd then
+      dStartAddLen = 100
+      dEndAddLen = 100
+   end
+   EgtSetMachiningParam( MCH_MP.STARTADDLEN, dStartAddLen)
+   EgtSetMachiningParam( MCH_MP.ENDADDLEN, dEndAddLen)
    -- faccio in modo che l'attacco della lama sia dal lato opposto rispetto al corpo macchina
    EgtSetMachiningParam( MCH_MP.TOOLINVERT, true)
    EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.LEFT)
@@ -247,9 +255,9 @@ end
 
 ---------------------------------------------------------------------
 -- tagli verticali aggiuntivi
-local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw )
+local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw, sNotes)
    local _, dimH = BL.GetFaceHvRefDim( Proc.Id, 0, b3Raw)
-   local nVerticalCuts = ceil( dimH / ( BD.MAX_DIM_DICE)) - 1
+   local nVerticalCuts = ceil( dimH / ( BD.MAX_LEN_DICE)) - 1
    local dVerticalSliceHeight = dimH / ( nVerticalCuts + 1)
    -- recupero il diametro dell'utensile
    local dSawDiam = 400
@@ -260,11 +268,11 @@ local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw )
       end
    end
    local bOk, sErr
-   -- tagli orizzontali
+   -- tagli verticali
    for j = nVerticalCuts, 1, -1 do
       local nFaceUse = MCH_MILL_FU.PARAL_FRONT
       local dVerticalCutOffset = dVerticalSliceHeight * -j
-      bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1 -dCutXOffset, BD.CUT_SIC, dVerticalCutOffset, 0, 0, '', b3Raw)
+      bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1 -dCutXOffset, BD.CUT_SIC, dVerticalCutOffset, 0, 0, sNotes, b3Raw)
       if not bOk then return bOk, sErr end
    end
    return bOk, sErr
@@ -343,7 +351,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
       if nNextRawId  and  EgtVerifyRawPartPhase( nNextRawId, nPhase) then
          local b3NextRaw = EgtGetRawPartBBox( nNextRawId)
          dLenEndRaw = ptC:getX() - b3NextRaw:getMin():getX()
-         nCuts = ceil( dLenEndRaw / ( BD.MAX_LEN_SCRAP + 0.5))
+         nCuts = ceil( dLenEndRaw / ( EgtIf( bBigSectionCut, BD.MAX_DIM_DICE - 0.1, BD.MAX_LEN_SCRAP + 0.5)))
          dOffsL = dLenEndRaw / nCuts
          -- aggiorno ingombro del grezzo corrente con quello del successivo
          b3Raw:Add( b3NextRaw)
@@ -355,7 +363,10 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
       local bFinishingNeeded = false
       if bSplit then
          -- recupero dati utensile della sega a catena più lunga a disposizione
-         local sSawing = ML.FindSawing( 'Sawing')
+         local sSawing = ML.FindSawing( 'SawingForSplitting', nil, nil, 'Longest')
+         if not sSawing then
+            sSawing = ML.FindSawing( 'Sawing', nil, nil, 'Longest')
+         end
          local dChainSawMaxMat = 0
          local dChainSawLen = 0
          if EgtMdbSetCurrMachining( sSawing or '') then
@@ -365,19 +376,6 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
                dChainSawLen = EgtTdbGetCurrToolParam( MCH_TP.LEN) or dChainSawLen
             end
          end
-         local sSawing2 = ML.FindSawing( 'Sawing', dChainSawMaxMat + 1)
-         if sSawing2 then
-            sSawing = sSawing2
-            dChainSawMaxMat = 0
-            dChainSawLen = 0
-            if EgtMdbSetCurrMachining( sSawing or '') then
-               local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
-               if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid) or '') then
-                  dChainSawMaxMat = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT) or dChainSawMaxMat
-                  dChainSawLen = EgtTdbGetCurrToolParam( MCH_TP.LEN) or dChainSawLen
-               end
-            end
-         end
 
          local bigSectionSplitType
          -- se pezzo non troppo alto, taglio singolo da sopra
@@ -405,26 +403,32 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
          if bigSectionSplitType == "single horizontal" then
             local dCutDepth = b3Raw:getDimZ() + BD.CUT_EXTRA_MIN
             local sNotesSplit = 'Split;'
-            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, MCH_MILL_FU.PARAL_TOP, dCutDepth, sNotesSplit, dOffs)
+            -- verifico se sega a catena lunga e devo quindi estendere ingresso e uscita perchè è probabile che non riesca a ruotare sopra al pezzo
+            local bExtendStartEnd
+            local dMinLengthLongChainSaw = 630
+            if dChainSawLen > dMinLengthLongChainSaw - 10 * GEO.EPS_SMALL then
+               bExtendStartEnd = true
+            end
+            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, sSawing, MCH_MILL_FU.PARAL_TOP, dCutDepth, sNotesSplit, dOffs, bExtendStartEnd)
             if not bOk then return bOk, sErr, nNewPhase end
          elseif bigSectionSplitType == "single vertical" then
             local dCutDepth = b3Raw:getDimY() + BD.CUT_EXTRA_MIN
             local sNotesSplit = 'Split;'
-            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, MCH_MILL_FU.PARAL_FRONT, dCutDepth, sNotesSplit, dOffs)
+            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, sSawing, MCH_MILL_FU.PARAL_FRONT, dCutDepth, sNotesSplit, dOffs)
             if not bOk then return bOk, sErr, nNewPhase end
          elseif bigSectionSplitType == "double vertical" then
             local dCutDepth = 0.5 * b3Raw:getDimY() + BD.CUT_EXTRA_MIN
             local sNotesSplit = 'Presplit;'
-            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, MCH_MILL_FU.PARAL_BACK, dCutDepth, sNotesSplit, dOffs)
+            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, sSawing, MCH_MILL_FU.PARAL_BACK, dCutDepth, sNotesSplit, dOffs)
             if not bOk then return bOk, sErr, nNewPhase end
             sNotesSplit = 'Split;'
-            bOk, sErr = MakeSplitByChainSaw( Proc.Id, MCH_MILL_FU.PARAL_FRONT, dCutDepth, sNotesSplit, dOffs)
+            bOk, sErr = MakeSplitByChainSaw( Proc.Id, sSawing, MCH_MILL_FU.PARAL_FRONT, dCutDepth, sNotesSplit, dOffs)
             if not bOk then return bOk, sErr, nNewPhase end
          elseif bigSectionSplitType == "double horizontal" then
             -- sega a catena da sopra
             local dChainSawCutDepth = b3Raw:getDimZ() + BD.CUT_EXTRA_MIN - dSawMaxDepth2
             local sNotesSplit = 'Presplit;'
-            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, MCH_MILL_FU.PARAL_TOP, dChainSawCutDepth, sNotesSplit, dOffs)
+            local bOk, sErr = MakeSplitByChainSaw( Proc.Id, sSawing, MCH_MILL_FU.PARAL_TOP, dChainSawCutDepth, sNotesSplit, dOffs)
             if not bOk then return bOk, sErr, nNewPhase end
             -- lama da sotto
             local dCutExtra = -dChainSawCutDepth + BD.CUT_EXTRA_MIN
@@ -513,7 +517,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
                         if AreOppositeVectorApprox( X_AX(), vtNLimitingSurf) then EgtInvertSurf( nLimitingSurf) end
                      end
                      -- tagli verticali
-                     bOk, sErr = AddVerticalPreCuts( AddProc, sCutting, 0, b3Raw)
+                     bOk, sErr = AddVerticalPreCuts( AddProc, sCutting, 0, b3Raw, sNotes)
                      if not bOk then return bOk, sErr end
                      -- tagli a cubetti con eventuale superficie limitante
                      bOk, sErr = Cut.Make( AddProc, nNewPhase, nRawId, nPartId, dMaxElev, nil, false, true, b3Raw, sNotes, dCurrOvmT, nil, nLimitingSurf)
@@ -638,7 +642,8 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
          local dCutOffset = ( i - 1) * dOffsL
          -- se trave larga effettuo tagli verticali aggiuntivi
          if not bSplit and ( dimH > BD.MAX_LEN_DICE) and ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL) then
-            local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, dCutOffset, b3Raw)
+            local sSpecNotes = EgtIf( bSplit, 'Presplit;', 'Precut;')
+            local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, dCutOffset, b3Raw, sSpecNotes)
             if not bOk then return bOk, sErr end
          end
          local sNotes
@@ -689,7 +694,8 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
          local dCutOffset = ( i - 1) * dOffsL
          -- se trave larga effettuo tagli verticali aggiuntivi
          if not bSplit and ( dimH > BD.MAX_LEN_DICE) and ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL) then
-            local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, dCutOffset, b3Raw)
+            local sSpecNotes = EgtIf( bSplit, 'Presplit;', 'Precut;')
+            local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, dCutOffset, b3Raw, sSpecNotes)
             if not bOk then return bOk, sErr end
          end
          local sNotes

Process.lua

@@ -140,6 +140,7 @@ local function MyProcessBeams()
                                                        ', Lmax='..EgtNumToString( BD.MAX_RAW, 0)..',MinUlr='..EgtNumToString( BD.MinRaw + BD.OVM_MID, 0)..')',
                               {'Lunghezza grezzo', EgtNumToString( BD.STD_RAW, 0)},
                               {'Sovramateriale di testa', EgtNumToString( BD.OVM_HEAD, 0)},
+                              {'Offset intermedio', EgtNumToString( BD.OVM_MID, 0)},
                               {'Forza sezione verticale', ' CB:true,*false'},
                               {'Ordina per lunghezza', ' CB:true,*false'})
    if not vsVal then
@@ -164,9 +165,17 @@ local function MyProcessBeams()
       EgtDraw()
       return false
    end
+   local dOvmMid = EgtEvalNumExpr( vsVal[3])
+   if not dOvmMid then
+      local sOut = 'Offset intermedio : ' .. vsVal[3]
+      EgtOutLog( sOut)
+      EgtOutBox( sOut, 'Lavora Travi', 'WARNING')
+      EgtDraw()
+      return false
+   end
 
    -- Sistemo sezione barra con travi
-   local bVert = ( vsVal[3] == 'true')
+   local bVert = ( vsVal[4] == 'true')
    if bVert then
       if dRawW > dRawH then dRawW, dRawH = dRawH, dRawW end
    end
@@ -206,7 +215,7 @@ local function MyProcessBeams()
    end
 
    -- Se richiesto, ordino le travi in senso di lunghezza crescente
-   local bOrd = ( vsVal[4] == 'true')
+   local bOrd = ( vsVal[5] == 'true')
    if bOrd then
       table.sort( vBeam, function( B1, B2)
                            if abs( B1.Box:getDimX() - B2.Box:getDimX()) < 1 then
@@ -226,7 +235,7 @@ local function MyProcessBeams()
    end
 
    -- Sistemo le travi nel grezzo
-   local bOk, sErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, vBeam)
+   local bOk, sErr = BE.ProcessBeams( dRawW, dRawH, dRawL, dOvmHead, dOvmMid, vBeam)
    if not bOk then
       EgtOutLog( sErr)
       EgtOutBox( sErr, 'Lavora Travi', 'ERROR')

Version.lua

@@ -1,6 +1,6 @@
--- Version.lua by Egaltech s.r.l. 2024/01/08
+-- Version.lua by Egaltech s.r.l. 2024/01/24
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '2.5l3'
+VERSION = '2.6a1'
-MIN_EXE = '2.5l3'
+MIN_EXE = '2.6a1'