Merge remote-tracking branch 'origin/develop'

LuaLibs/BeamExec.lua

@@ -443,7 +443,7 @@ local function CalcHeadTailMachBeforeIntersDrillings( vProc, b3Raw)
    for i = 1, #vProc do
       local Proc = vProc[i]
       if Proc.Box and not Proc.Box:isEmpty() then
-         if Proc.Fct == 1 and BL.IsFeatureCuttingEntireSection( Proc.Box, b3Raw:getDimY(), b3Raw:getDimZ()) and ( Proc.Head or Proc.Tail) and Proc.Prc ~= 350 then
+         if Proc.Fct == 1 and ( BL.IsFeatureCuttingEntireSection( Proc.Box, b3Raw:getDimY(), b3Raw:getDimZ()) or Cut.Identify( Proc)) and ( Proc.Head or Proc.Tail) and Proc.Prc ~= 350 then
             if Proc.Head and Proc.Box:getCenter():getX() < dHeadX then
                dHeadX = Proc.Box:getCenter():getX()
                nHeadId = Proc.Id
@@ -915,6 +915,22 @@ local function ReorderFeatureWithDependency( vProc)
             table.insert( vProc, nRefIndex, table.remove( vProc, i))
             i = max( nRefIndex - 1, 1)
          end
+      elseif Drill.Identify( vProc[i]) and vProc[i].Dependency and vProc[i].Dependency.ExecAfter and vProc[i].Dependency.ExecAfter.Id then
+         local nRefId = vProc[i].Dependency.ExecAfter.Id
+         local nRefIndex
+
+         for j = 1, #vProc do
+            if i ~= j and vProc[j].Id == nRefId then
+               nRefIndex = j
+               break
+            end
+         end
+
+         -- se il processo deve stare dopo, ma ora è prima
+         if nRefIndex and nRefIndex > i then
+            table.insert( vProc, nRefIndex, table.remove( vProc, i))
+            i = max( nRefIndex - 1, 1)
+         end
       end
       i = i + 1
    end

LuaLibs/ProcessLapJoint.lua

@@ -1004,7 +1004,7 @@ end
 ---------------------------------------------------------------------
 -- Lavorazione con fresa
 ---------------------------------------------------------------------
-local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId)
+local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId, nForcedFacInd, nSideInd)
    -- recupero l'ingombro del grezzo di appartenenza
    local b3Raw = EgtGetRawPartBBox( nRawId)
    -- recupero l'ingombro della trave
@@ -1015,13 +1015,16 @@ local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId)
       return false, sErr
    end
    -- verifico il numero di facce della tacca
-   assert( ( Proc.Fct == 1), 'Error : MakeOneFaceByMill in LapJoint with ' .. tostring( Proc.Fct) .. ' faces')
+   if not nForcedFacInd then
+      assert( ( Proc.Fct == 1), 'Error : MakeOneFaceByMill in LapJoint with ' .. tostring( Proc.Fct) .. ' faces')
+      nForcedFacInd = 0
+   end
    -- dati della faccia
-   local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, 0, GDB_ID.ROOT)
+   local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, nForcedFacInd, GDB_ID.ROOT)
    -- verifico se orientata verso l'alto
    local bUp = ( vtN:getZ() >= BD.NZ_MINA)
    -- scelta faccia da lavorare
-   local nFacInd = 0
+   local nFacInd = nForcedFacInd
    -- recupero la lavorazione
    local sMilling = ML.FindMilling( 'BirdsMouth')
    if not sMilling then
@@ -1029,6 +1032,16 @@ local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId)
       EgtOutLog( sErr)
       return false, sErr
    end
+   local dTDiam = 50
+   local dMaxMat = 0
+   if EgtMdbSetCurrMachining( sMilling) then
+      local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+      if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid) or '') then
+         dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dTDiam
+         dMaxMat = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT) or dMaxMat
+      end
+   end
+   dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dTDiam
    -- inserisco la lavorazione di fresatura
    local sName = 'Mill_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
    local nMchFId = EgtAddMachining( sName, sMilling)
@@ -1039,8 +1052,17 @@ local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId)
    end
    -- aggiungo geometria
    EgtSetMachiningGeometry( {{ Proc.Id, nFacInd}})
-   -- imposto uso faccia e lato correzione
-   if vtN:getX() > 0 then
+   -- imposto uso faccia e lato correzione se forzate da fuori forzo lavorazione della faccia
+   if nSideInd and nForcedFacInd then
+      EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.NONE)
+      EgtSetMachiningParam( MCH_MP.ENDADDLEN, -dTDiam / 2)
+      EgtSetMachiningParam( MCH_MP.STARTADDLEN, -dTDiam / 2)
+      local sUserNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
+      sUserNotes = EgtSetValInNotes( sUserNotes, 'EdgesFaceUse', EgtNumToString( nSideInd))
+      EgtSetMachiningParam( MCH_MP.USERNOTES, sUserNotes)
+      EgtSetMachiningParam( MCH_MP.LIPERP, dTDiam / 2)
+      EgtSetMachiningParam( MCH_MP.LOPERP, dTDiam / 2)
+   elseif vtN:getX() > 0 then
       EgtSetMachiningParam( MCH_MP.FACEUSE, EgtIf( bUp, MCH_MILL_FU.ORTHO_LEFT, MCH_MILL_FU.PARAL_LEFT))
    else
       EgtSetMachiningParam( MCH_MP.FACEUSE, EgtIf( bUp, MCH_MILL_FU.ORTHO_RIGHT, MCH_MILL_FU.PARAL_RIGHT))
@@ -4767,7 +4789,7 @@ local function MakeByPockets( Proc, nPhase, nRawId, nPartId, nChamfer, dDepthCha
                   end
                end
             end
-            return 1, sWarn, dDimMin, dDimMax, dDepth, vtOrtho, nLundIdFace, dDiamTool, bDoubleSide, nPathInt, nSurfInt, bOneShot, bMillDown, nFirstMachId
+            return 1, sWarn, dDimMin, dDimMax, dDepth, vtOrtho, nLundIdFace, dDiamTool, bDoubleSide, nPathInt, nSurfInt, bOneShot, bMillDown, nFirstMachId, nil, sPocketing
          end
       end
    end
@@ -7511,14 +7533,34 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                end
                -- provo con contornatura
                local dDiamTool = 20
+               local nChoosenFacInd = nFacInd2
+               local dChoosenFacElev = dFacElev2
                if bIsL then
                   local bOk, sErr
                   bOk, sWarn, dDiamTool = MakeByMill( Proc, nPhase, nRawId, nPartId, nFacInd, rfFac, dH, dV, dFacElev, dCollSic, true, sMilling, nFacInd2, dFacElev2)
                   if not bOk then return bOk, sWarn end
                else
-                  local sErr = 'Error : Impossible mill special LapJoint'
-                  EgtOutLog( sErr)
-                  return false, sErr
+                  -- provo ancora con la pocketing dell'altra faccia
+                  local sPocketing = ML.FindPocketing( sMchFind, dDiam, dFacElev + dCollSic)
+                  if sPocketing then
+                     nChoosenFacInd = nFacInd
+                     dChoosenFacElev = dFacElev
+                     local Edges = BL.GetEdgesInfo( Proc, Proc.Face[nFacInd+1])
+                     local nSideInd
+                     for i = 1, #Edges do 
+                        if Edges[i].AdjacentFaceId == nFacInd2 then
+                           nSideInd = i - 1
+                           break
+                        end
+                     end
+                     -- se pocketing ok forza facet e spigolo di lavoro
+                     bOk, sWarn = MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId, nFacInd2, nSideInd)
+                     if not bOk then return bOk, sWarn end
+                  else
+                     local sErr = 'Error : Impossible mill special LapJoint'
+                     EgtOutLog( sErr)
+                     return false, sErr
+                  end
                end
                -- inserisco la lavorazione di svuotatura
                local sName = 'Pock_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
@@ -7529,7 +7571,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                   return false, sErr
                end
                -- aggiungo geometria
-               EgtSetMachiningGeometry( {{ Proc.Id, nFacInd2}})
+               EgtSetMachiningGeometry( {{ Proc.Id, nChoosenFacInd}})
                -- imposto uso faccia
                EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.ORTHO_CONT)
                -- imposto posizione braccio porta testa
@@ -7544,7 +7586,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                end
                -- imposto elevazione
                local sUserNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
-               sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dFacElev2, 1))
+               sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dChoosenFacElev, 1))
                EgtSetMachiningParam( MCH_MP.USERNOTES, sUserNotes)
                -- eseguo
                if not ML.ApplyMachining( true, false) then
@@ -8068,7 +8110,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                                  bSetOpenBorders = true
                               end
                               nOk, sErr, dDimMin, dDimMax, dDepth, vtOrtho, nLundIdFace, dDiamTool, bDoubleSide, nPathInt, nSurfInt, bOneShot, bMillDown, nFirstMachId, 
-                              bOrthoFaces = MakeByPockets( Proc, nPhase, nRawId, nPartId, nChamfer, dDepthCham, nAddGrpId, sMyMchFind, bIs3Faces, b3Solid, bOrthoFacesMaster, bMillDown, bSetOpenBorders, bIsU, bIsL)
+                              bOrthoFaces, sPocketing = MakeByPockets( Proc, nPhase, nRawId, nPartId, nChamfer, dDepthCham, nAddGrpId, sMyMchFind, bIs3Faces, b3Solid, bOrthoFacesMaster, bMillDown, bSetOpenBorders, bIsU, bIsL)
                               if nOk == -3 then
                                  bTryWithBlades = true
                               elseif nOk == -2 then
@@ -8102,6 +8144,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                                  end
                                  -- se abilitato dal parametro Q inserisco pulitura spigoli o contorno con fresa più piccola
                                  local nContourSmallTool = EgtGetInfo( Proc.Id, Q_CONTOUR_SMALL_TOOL, 'i') or 0
+                                 local nCleanCorner = EgtGetInfo( Proc.Id, Q_CLEAN_CORNER, 'i') or 0
                                  if nContourSmallTool > 0 then
                                     local bOk, sWarn2 = MakeRoundCleanCornerOrContour( Proc, nPhase, nRawId, nPartId, b3Raw, 
                                                                                        nFacInd, nAddGrpId, dDiamTool, nContourSmallTool, bMillDown, 
@@ -8113,6 +8156,43 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                                        sWarn = EgtIf( #sWarn > 0, sWarn .. '\n' .. sWarn2, sWarn2)
                                     end
                                  end
+                                 -- se richiesta pulizia spigoli con fresa a V
+                                 if nCleanCorner > 0 then
+                                    local dMaxToolMaterial = 0
+                                    if EgtMdbSetCurrMachining( sPocketing) then
+                                       local sTuuidPk = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+                                       if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuidPk) or '') then
+                                          dMaxToolMaterial = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT) or dMaxToolMaterial
+                                       end
+                                    end
+                                    local nNewProc
+                                    local vtSpec = vtN
+                                    if not ( Proc.Fct == 3 and bIsU) then
+                                       nNewProc = RemoveBottomFaceAndReorder( Proc, nAddGrpId, nFacInd, vtN)
+                                    -- se U passante ricavo vettore da "sopra" con componente Z forzata in positivo
+                                    else
+                                       nNewProc = EgtCopyGlob( Proc.Id, nAddGrpId) or GDB_ID.NULL
+                                       local nNumFacet = EgtSurfTmFacetCount( nNewProc)
+                                       -- vettore normale ad una delle facce adiacenti
+                                       local vtOther = EgtSurfTmFacetNormVersor( Proc.Id, Proc.Face[nFacInd+1].Adjacencies[1], GDB_ID.ROOT)
+                                       -- ricavo vettore verso l'alto (simulo faccia di fondo)
+                                       vtSpec = vtN ^ vtOther
+                                       -- se negativo in Z forzo positivo
+                                       if vtSpec:getZ() < 0 then
+                                          vtSpec:mirror(vtSpec)
+                                       end
+                                       ReorderFaces( nNewProc, nNumFacet, vtSpec)
+                                       -- normale della lavorazione clean corner
+                                       vtN = vtSpec
+                                    end
+                                    local vFace, dDepth = GetFacesData( nNewProc, dDiamTool, dMaxToolMaterial, ( dDiamTool/2), nAddGrpId, Proc.PartId, vtN)
+                                    local bCleanCornerOk, sCleanCornerWarn = AddMillCorner( vFace, Proc, dDiamTool, nAddGrpId, nNewProc, vtN)
+                                    if not bCleanCornerOk then return false, sCleanCornerWarn end
+                                    if sCleanCornerWarn then
+                                       if not sWarn then sWarn = '' end
+                                       sWarn = EgtIf( #sWarn > 0, sWarn .. '\n' .. sCleanCornerWarn, sCleanCornerWarn)
+                                    end
+                                 end
                               end
                            end
                            bOk = true
@@ -8328,7 +8408,26 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                -- se richiesta pulizia spigoli con fresa a V
                if nCleanCorner > 0 then
                   local dThElev = dToolThDiameter / 2 * sqrt( vtN:getX() * vtN:getX() + vtN:getY() * vtN:getY())
-                  local nNewProc = RemoveBottomFaceAndReorder( Proc, nAddGrpId, nFacInd, vtN)
+                  local nNewProc
+                  local vtSpec = vtN
+                  if not ( Proc.Fct == 3 and bIsU) then
+                     nNewProc = RemoveBottomFaceAndReorder( Proc, nAddGrpId, nFacInd, vtN)
+                  -- se U passante ricavo vettore da "sopra" con componente Z forzata in positivo
+                  else
+                     nNewProc = EgtCopyGlob( Proc.Id, nAddGrpId) or GDB_ID.NULL
+                     local nNumFacet = EgtSurfTmFacetCount( nNewProc)
+                     -- vettore normale ad una delle facce adiacenti
+                     local vtOther = EgtSurfTmFacetNormVersor( Proc.Id, Proc.Face[nFacInd+1].Adjacencies[1], GDB_ID.ROOT)
+                     -- ricavo vettore verso l'alto (simulo faccia di fondo)
+                     vtSpec = vtN ^ vtOther
+                     -- se negativo in Z forzo positivo
+                     if vtSpec:getZ() < 0 then
+                        vtSpec:mirror(vtSpec)
+                     end
+                     ReorderFaces( nNewProc, nNumFacet, vtSpec)
+                     -- normale della lavorazione clean corner
+                     vtN = vtSpec
+                  end
                   local vFace, dDepth = GetFacesData( nNewProc, dToolDiameter, dMaxToolMaterial, ( dToolDiameter/2), nAddGrpId, Proc.PartId, vtN)
                   local bCleanCornerOk, sCleanCornerWarn = AddMillCorner( vFace, Proc, dToolDiameter, nAddGrpId, nNewProc, vtN)
                   if not bCleanCornerOk then return false, sCleanCornerWarn end

UpdateLog.txt

@@ -1,5 +1,10 @@
            ==== Beam Update Log ====
 
+Versione 3.1f3 (25/06/2026)
+- Modif : LapJoint - migliorata gestione BirdsMouth con più di 3 facce
+- Modif : Per identificare feature di testa, oltre che verificare se sia troncante, si controlla anche la feature taglio
+- Added : LapJoint - CleanCorner per tasche a 3 facce a U
+
 Versione 3.1f2 (18/06/2026)
 - Added : Gestione svuotature in doppio tipo NT
 

Version.lua

@@ -2,5 +2,5 @@
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '3.1f2'
+VERSION = '3.1f3'
 MIN_EXE = '3.1b1'