Merge branch 'Test/OpenPocketSplit' into develop

- Eliminata forzatura ZigZag per tasche strette e utensili < 90
- Forzato OpenOutRaw se ce l'apertura sulla curva

LuaLibs/BeamExec.lua

@@ -1980,10 +1980,7 @@ local function VerifyDrillMirrored( Proc, vProc, b3Raw)
       sDrilling, sType, dMaxDepth = ML.FindDrilling( dDiam, 0, true, false, true)
       dMachiningDepth = dMaxDepth or dMachiningDepth
    end
-   if not sDrilling
-      or ( sType ~= 'Drill' and ( sType ~= 'Pocket'or ( Proc.Fcs ~= 0 and Proc.Fce ~= 0)))
-      or not EgtMdbSetCurrMachining( sDrilling) then
-
+   if not sDrilling or not EgtMdbSetCurrMachining( sDrilling) then
       return
    end
    local dDrillingStep = EgtMdbGetCurrMachiningParam( MCH_MP.STEP)

LuaLibs/BeamLib.lua

@@ -1403,5 +1403,39 @@ function BeamLib.GetToolFromMachining( sMachiningName)
    return Tool
 end
 
+-------------------------------------------------------------------------------------------------------------
+--- copia una tabella lua in modo ricorsivo, ossia mantiene indipendenti anche tutte le sottotabelle
+--- ATTENZIONE: in caso di modifiche vanno gestiti anche i tipi custom; sarebbe meglio metterla nel LuaLibs
+function BeamLib.TableCopyDeep( OriginalTable)
+   -- controllo se oggetto passato è valido, altrimenti errore. Non deve mai succedere
+   if not OriginalTable then
+      error( "TableCopyDeep : can't copy nil object")
+   end
+   local CopiedTable = {}
+   for key, value in pairs( OriginalTable) do
+      if type( value) == "table" then
+         if isBBox3d( value) then
+            CopiedTable[ key] = BBox3d( value)
+         elseif isColor3d( value) then
+            CopiedTable[ key] = Color3d( value)
+         elseif isFrame3d( value) then
+            CopiedTable[ key] = Frame3d( value)
+         elseif isPoint3d( value) then
+            CopiedTable[ key] = Point3d( value)
+         elseif isQuaternion( value) then
+            CopiedTable[ key] = Quaternion( value)
+         elseif isVector3d( value) then
+            CopiedTable[ key] = Vector3d( value)
+         else
+            CopiedTable[ key] = BeamLib.TableCopyDeep( value)
+         end
+      else
+         CopiedTable[ key] = value
+      end
+   end
+
+   return CopiedTable
+end
+
 -------------------------------------------------------------------------------------------------------------
 return BeamLib

LuaLibs/ProcessDrill.lua

@@ -313,6 +313,32 @@ local function GetHoleStartData( ptCen, vtExtr, b3Solid)
    return nFac, CosB, vFaces
 end
 
+---------------------------------------------------------------------
+local function GetSCC( Proc, vtExtr, b3Solid, bDrillAngTrasm, nPhase)
+   local nSCC = MCH_SCC.NONE
+
+   if bDrillAngTrasm then
+      nSCC = MCH_SCC.ADIR_NEAR
+   elseif BD.TURN == 2 then
+      nSCC = MCH_SCC.ADIR_ZP
+   elseif not BD.C_SIMM and not BD.TURN then
+      nSCC = MCH_SCC.ADIR_YM 
+      if AreSameVectorApprox( vtExtr, Z_AX()) then
+         nSCC = MCH_SCC.ADIR_YM
+      elseif abs( vtExtr:getX()) < 0.1 then
+         local bNearTail = ( Proc.Box:getCenter():getX() < b3Solid:getCenter():getX() and Proc.Box:getCenter():getX() - b3Solid:getMin():getX() < 1000)
+         local bVeryShortPart = ( BD.LEN_VERY_SHORT_PART and b3Solid:getDimX() < BD.LEN_VERY_SHORT_PART)
+         nSCC = EgtIf( BL.IsPartFinalPhase( nPhase) or ( bNearTail and not bVeryShortPart), MCH_SCC.ADIR_XM, MCH_SCC.ADIR_XP)
+      elseif vtExtr:getY() > 0.1 then
+         nSCC = MCH_SCC.ADIR_YP
+      end
+   else
+      nSCC = MCH_SCC.NONE
+   end
+
+   return nSCC
+end
+
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione
 function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
@@ -588,6 +614,7 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
       dDepth = dMaxDepth
       dMaxElev = dMaxDepth
    end
+
    -- inserisco la lavorazione
    local sName = EgtIf( EgtStartsWith( sType, 'Predrill'), 'Predrill_', 'Drill_') .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
    local nMchId = EgtAddMachining( sName, sDrilling)
@@ -605,31 +632,21 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
       EgtSetMachiningParam( MCH_MP.TOOLINVERT, bToInvert)
    end
    -- imposto posizione braccio porta testa
-   local nSCC = MCH_SCC.NONE
-   if bDrillAngTrasm then
-      nSCC = MCH_SCC.ADIR_NEAR
-   elseif BD.TURN == 2 then
-      nSCC = MCH_SCC.ADIR_ZP
-   elseif not BD.C_SIMM and not BD.TURN then
-      nSCC = MCH_SCC.ADIR_YM 
-      if AreSameVectorApprox( vtExtr, Z_AX()) then
-         nSCC = MCH_SCC.ADIR_YM
-      elseif abs( vtExtr:getX()) < 0.1 then
-         local bNearTail = ( Proc.Box:getCenter():getX() < b3Solid:getCenter():getX() and Proc.Box:getCenter():getX() - b3Solid:getMin():getX() < 1000)
-         local bVeryShortPart = ( BD.LEN_VERY_SHORT_PART and b3Solid:getDimX() < BD.LEN_VERY_SHORT_PART)
-         nSCC = EgtIf( BL.IsPartFinalPhase( nPhase) or ( bNearTail and not bVeryShortPart), MCH_SCC.ADIR_XM, MCH_SCC.ADIR_XP)
-      elseif vtExtr:getY() > 0.1 then
-         nSCC = MCH_SCC.ADIR_YP
-      end
-   else
-      nSCC = MCH_SCC.NONE
-   end
+   local nSCC = GetSCC( Proc, vtExtr, b3Solid, bDrillAngTrasm, nPhase)
    EgtSetMachiningParam( MCH_MP.SCC, nSCC)
    -- imposto affondamento
-   if Proc.Double and Proc.Double > 0 and dDepth > Proc.MachDepthDouble + 10 * GEO.EPS_SMALL then
-      sMyWarn = 'Warning in double head drilling : depth (' .. EgtNumToString( dDepth, 1) .. ') reduced to (' .. EgtNumToString( Proc.MachDepthDouble, 1) .. ') to match H2 max tool depth'
-      dDepth = Proc.MachDepthDouble
-      dMaxElev = Proc.MachDepthDouble
+   local dLastStepDepth
+   if Proc.Double and Proc.Double > 0 then
+      if ( sType == 'Pocket_AT' or sType == 'Pocket') and bOpen then
+         local dReduceDepth = MIRROR_POCKETS_MIN_DISTANCE / 2 + 10
+         dLastStepDepth = dDepth + dReduceDepth
+         dDepth = dDepth - dReduceDepth
+      end
+      if dDepth > Proc.MachDepthDouble + 10 * GEO.EPS_SMALL then
+         sMyWarn = 'Warning in double head drilling : depth (' .. EgtNumToString( dDepth, 1) .. ') reduced to (' .. EgtNumToString( Proc.MachDepthDouble, 1) .. ') to match H2 max tool depth'
+         dDepth = Proc.MachDepthDouble
+         dMaxElev = Proc.MachDepthDouble
+      end
    end
    EgtSetMachiningParam( MCH_MP.DEPTH, dDepth)
    -- imposto il valore della distanza di sicurezza per l'attacco. Se il valore del db utensili è troppo basso lo alzo a 10.
@@ -641,8 +658,16 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
    local sUserNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
    sUserNotes = EgtSetValInNotes( sUserNotes, 'VMRS', 0)
    -- aggiungo alle note massima elevazione (coincide con affondamento)
-   if dMaxElev then
-      sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dMaxElev, 1))
+   local dCustomMaxElev
+   if Proc.dCustomMaxElev and type( Proc.dCustomMaxElev) == "number" and Proc.dCustomMaxElev > 10 * GEO.EPS_SMALL then
+      dCustomMaxElev = Proc.dCustomMaxElev
+   end
+   if dMaxElev or dCustomMaxElev then
+      if dCustomMaxElev then
+         sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dCustomMaxElev, 1))
+      else
+         sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dMaxElev, 1))
+      end
    end
    -- se foro passante, aggiungo questa qualifica alle note
    if ( sType == 'Drill' or sType == 'Drill_H2' or sType == 'AngleDrill') and  bOpen then
@@ -668,7 +693,7 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
    end
    if not bOk then
       local _, sErr = EgtGetLastMachMgrError()
-      EgtSetOperationMode( nMchId, false) 
+      EgtSetOperationMode( nMchId, false)
       return false, sErr
    else
       local _, sWarn = EgtGetMachMgrWarning( 0)
@@ -676,6 +701,27 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId)
          EgtSetOperationMode( nMchId, false)
          return false, sWarn
       else
+         -- se DrillPocket passante in doppio si fa lavorazione aggiuntiva dell'ultimo step
+         if Proc.Double and Proc.Double > 0 and ( sType == 'Pocket_AT' or sType == 'Pocket') and bOpen then
+            local nAddGrpId = BL.GetAddGroup( Proc.PartId)
+            local idProcLastStep = EgtCopyGlob( Proc.Id, nAddGrpId)
+            local idAuxIdLastStep = EgtCopyGlob( AuxId, nAddGrpId)
+            EgtModifyCurveThickness( idAuxIdLastStep, -dLastStepDepth)
+            local ProcLastStep = BL.TableCopyDeep( Proc)
+            ProcLastStep.Id = idProcLastStep
+            ProcLastStep.Flg = 1
+            ProcLastStep.Double = 0
+            ProcLastStep.dCustomMaxElev = dLastStepDepth - dDepth
+            local bOkLastStep, sWarnLastStep = ProcessDrill.Make( ProcLastStep, nPhase, nRawId, nPartId)
+            if not bOkLastStep then
+               sWarnLastStep = 'Drillpocket double : incomplete, last step missing'
+            end
+            local sPreviousWarn = sMyWarn or sWarn
+            if sWarnLastStep then
+               if not sPreviousWarn then sPreviousWarn = '' end
+               sMyWarn = EgtIf( #sPreviousWarn > 0, sPreviousWarn .. '\n' .. sWarnLastStep, sWarnLastStep)
+            end
+         end
          return true, ( sMyWarn or sWarn)
       end
    end

LuaLibs/ProcessHeadCut.lua

@@ -196,7 +196,11 @@ local function MakeHeadChamfer( idProc, nPartId)
    EgtSetGridFrame( Frame3d( 0,0,0, GDB_FR.RIGHT))
 
    local dQ09Value = EgtGetInfo( idProc, 'Q09', 'd')
+   if not dQ09Value then
+      dQ09Value = 0.1
+   end
    local bChamferedEdge = dQ09Value > 0
+   dQ09Value = EgtIf( bChamferedEdge, max( dQ09Value, 0.1), min( dQ09Value, -0.1))
 
    local nIdFirstEntity, nEntityCnt = EgtExplodeCurveCompo( nLoopId)
    local p3MidPoint = EgtMP( nIdFirstEntity, GDB_ID.GRID)
@@ -232,6 +236,9 @@ local function MakeHeadChamfer( idProc, nPartId)
    end
    EgtChangeClosedCurveStartPoint( idGeom, p3MidPoint, GDB_RT.GRID)
 
+   -- reimposto la griglia
+   EgtSetGridFrame()
+
    -- Inserisco la lavorazione del lato standard
    local dExtra = 2
    local sName1 = 'HeadCham_' .. ( EgtGetName( idProc) or tostring( idProc))

LuaLibs/ProcessLapJoint.lua

@@ -150,7 +150,7 @@ local Q_MAX_ELEVATION       = '' -- d
 local Q_SAW_PLUS_CHAIN      = '' -- i
 local Q_FORCE_CHAINSAW      = '' -- i
 local Q_CHAINSAW_FROM_SIDE  = '' -- i
-local Q_MILL_AS_BLADE_CONVENTIONAL = '' -- i
+local Q_CONVENTIONAL_MILLING = '' -- i
 local Q_CLEAN_CORNER        = '' -- 1
 local Q_FLOATING_AGGREGATE  = '' -- i
 
@@ -201,7 +201,7 @@ local function AssignQIdent( Proc)
    Q_FORCE_CHAINSAW     = 'Q12'
    -- TODO da riportare a Q13 quando è sistemata la gestione del movimento in macchina nell'attacco laterale
    Q_CHAINSAW_FROM_SIDE = 'Q999'
-   Q_MILL_AS_BLADE_CONVENTIONAL = ''
+   Q_CONVENTIONAL_MILLING = ''
    Q_CLEAN_CORNER = ''
    Q_FLOATING_AGGREGATE = ''
 
@@ -209,7 +209,7 @@ local function AssignQIdent( Proc)
       Q_FORCE_BLADE         = 'Q01' -- i
       Q_DEPTH_CHAMFER       = 'Q04' -- d
       Q_ONLY_CHAMFER        = 'Q05' -- i
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 17 then
       Q_DEPTH_CHAMFER       = 'Q01' -- d
       Q_ONLY_CHAMFER        = 'Q02' -- i
@@ -230,7 +230,7 @@ local function AssignQIdent( Proc)
       Q_BLADE_ON_ALONG_FACE = 'Q04' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
       Q_DEPTH_CHAMFER       = 'Q07' -- d
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
       Q_CLEAN_CORNER        = 'Q15' -- i
       Q_FLOATING_AGGREGATE  = 'Q16' -- i
    elseif ( Proc.Grp == 1 or Proc.Grp == 2)  and  Proc.Prc == 30 then
@@ -239,25 +239,26 @@ local function AssignQIdent( Proc)
       Q_SIDE_ROUGH_TOOL     = 'Q01' -- i
       Q_CONTOUR_SMALL_TOOL  = 'Q02' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 33 then
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 34 then
       Q_CONTOUR_SMALL_TOOL  = 'Q01' -- i
       Q_USE_MILL            = 'Q02' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
    elseif ( Proc.Grp == 4)  and  Proc.Prc == 37 then
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    elseif ( Proc.Grp == 4)  and  Proc.Prc == 39 then
       Q_CONTOUR_SMALL_TOOL  = 'Q01' -- i
       Q_USE_MILL            = 'Q02' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 90 then
       Q_ANTISPLINT_TYPE     = 'Q03' -- i
       Q_SIDE_ROUGH_TOOL     = 'Q04' -- i
-      Q_MILL_AS_BLADE_CONVENTIONAL = 'Q14' -- i
+      Q_CONVENTIONAL_MILLING = 'Q14' -- i
    end
    -- le altre features gestite non hanno parametri Q
 end
@@ -2886,7 +2887,7 @@ local function MakeByMillAsSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
       local dOffs = ( i - 1) * dStep
       if vtN:getZ() < dVzLimDwnUp then dOffs = dOffs + dSawThick end
       -- forzatura lavorazione discorde in base a parametro Q su feature
-      local nQ14Param = EgtGetInfo( Proc.Id, Q_MILL_AS_BLADE_CONVENTIONAL, 'd') or 0
+      local nQ14Param = EgtGetInfo( Proc.Id, Q_CONVENTIONAL_MILLING, 'd') or 0
       local bForceInvert = nQ14Param == 1 or ( nQ14Param == 2 and vtN:getX() < 0.1 and Proc.AffectedFaces.Bottom)
       if bForceInvert and i == 1 then
          dStartDist, dEndDist = dEndDist, dStartDist
@@ -3536,7 +3537,11 @@ local function MakePocket( Proc, nPartId, b3Solid, ptPs, tvtN, nFaceRef, sMchFin
       return false, sErr
    end
    -- aggiungo geometria
-   EgtSetMachiningGeometry( {{ Proc.Id, (nFaceRef)}})
+   if Proc.LoopIdFacInd then
+      EgtSetMachiningGeometry( { Proc.LoopIdFacInd})
+   else
+      EgtSetMachiningGeometry( {{ Proc.Id, (nFaceRef)}})
+   end
    -- imposto uso faccia
    EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.ORTHO_CONT)
    -- imposto posizione braccio porta testa
@@ -3563,15 +3568,13 @@ local function MakePocket( Proc, nPartId, b3Solid, ptPs, tvtN, nFaceRef, sMchFin
    end
    EgtSetMachiningParam( MCH_MP.SCC, nSCC)
    -- se tasca aperta e non lavorata col truciolatore, imposto opportuno attacco
-   if sMchFind == 'OpenPocket' and nUseRoughTool == 0 then
+   if ( sMchFind == 'OpenPocket' or sMchFind == 'OpenPocket_H2') and nUseRoughTool == 0 then
       EgtSetMachiningParam( MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALIN)
    end
    if sMchFind == 'OpenPocket' and dDiamTool < 90 then
       local _, dH, dV = EgtSurfTmFacetMinAreaRectangle( Proc.Id, nFaceRef, GDB_ID.ROOT)
       local bL = ( Proc.Fct < 4 or TestElleShape4( Proc) == 2)
       if bL and min( dH, dV) < 1.5 * dDiamTool then
-         EgtSetMachiningParam( MCH_MP.SUBTYPE, MCH_POCK_SUB.ZIGZAG)
-         EgtSetMachiningParam( MCH_MP.INVERT, false)
          if not bTipMill then
             EgtSetMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
             EgtSetMachiningParam( MCH_MP.LITANG, dDiamTool)
@@ -3596,7 +3599,7 @@ local function MakePocket( Proc, nPartId, b3Solid, ptPs, tvtN, nFaceRef, sMchFin
    local sUserNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
    sUserNotes = EgtSetValInNotes( sUserNotes, 'MaxElev', EgtNumToString( dElev, 1))
    sUserNotes = EgtSetValInNotes( sUserNotes, 'VMRS', 0)
-   if bOpenOutRaw then
+   if bOpenOutRaw or ( Proc.LoopIdFacInd and ( EgtGetInfo( Proc.LoopIdFacInd, 'OPEN', 'i') or -1) > -1) then
       sUserNotes = EgtSetValInNotes( sUserNotes, 'OpenOutRaw', 1)
    end
    EgtSetMachiningParam( MCH_MP.USERNOTES, sUserNotes)
@@ -6650,7 +6653,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
    end
    -- eventuale forzatura sega a catena
    local bForceChainsaw = ( EgtGetInfo( Proc.Id, Q_FORCE_CHAINSAW, 'i') or 0) > 0
-   -- se è un tunnel provo a vedere se è possibile lavorarlo con la svuotatura o con la sega catena
+
+   -- TUNNEL: svuotatura o sega a catena
    if bClosedOrthoFaces then
       local bTryWithBlades = true
       local dDimMin, dDimMax, dDepth, vtOrtho, nLundIdFace
@@ -6740,7 +6744,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
             end
          end
       end
-   -- altrimenti non è una fessura
+
+   -- NO TUNNEL: tutti gli altri casi
    else
       -- dati della faccia
       local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, nFacInd, GDB_ID.ROOT)
@@ -6776,6 +6781,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
       if bPrevBhSideMill == nil then
          bPrevBhSideMill = bMakeBySideMill
       end
+
+      -- SIDEMILL (tipo BLOCKHAUS)
       if bMakeBySideMill then
          -- se smusso non è esclusivo
          if nChamfer < 2 then
@@ -6910,7 +6917,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                end
             end
          end
-      -- altrimenti lavoro con svuotatura
+
+      -- TASCA GENERICA: si cerca il modo migliore di lavorare in base alla forma
       else
          local bSpecial3faces = false
          -- verifico se lavorando la faccia principale rimane esclusa molta sezione trasversale complessiva della feature (da box)
@@ -6940,7 +6948,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
             end
          end
          
-         -- se posso in effetti fare fresatura con aggregato flottante
+         -- FRESATURA SPECIALE CON AGGREGATO FLOTTANTE 
          if bPocketFloatingAggregate then
             -- inserisco la lavorazione di svuotatura
             local sName = 'Float_Mill_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
@@ -6963,7 +6971,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
             -- imposto uso faccia
             local nFaceUse = BL.GetNearestParalOpposite( vtN)
             EgtSetMachiningParam( MCH_MP.FACEUSE, nFaceUse)
-            -- piccolo offser radiale per essere sicuri di lavorare anche con tasca larga come diametro fresa
+            -- piccolo offset radiale per essere sicuri di lavorare anche con tasca larga come diametro fresa
             EgtSetMachiningParam( MCH_MP.OFFSR, -0.01)
 
             -- imposto posizione braccio porta testa
@@ -6988,7 +6996,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                return false, sErr
             end
 
-         -- se riconosciuta gestione 3 facce (limitatamente per ora alla feature 20)
+         -- CASO SPECIALE 3 FACCE (se rimane esclusa molta sezione trasversale complessiva della feature, solo per feature 20)
          elseif bSpecial3faces and Proc.Prc == 20 then
             -- se smusso non è esclusivo
             if nChamfer < 2 then
@@ -7114,7 +7122,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                   if not bOk then return false, sWarn end
                end
             end
-         -- altrimenti lavorazione di svuotatura o contornatura
+
+         -- SVUOTATURA O FRESATURA: si valuta se si può fare svuotatura o se provare altro
          else
             local bUseOtherFace
             local bLapJointAngTrasm = false
@@ -7228,6 +7237,11 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                   nUseRoughTool = 1
                end
             end
+            -- se presente curva da lavorare con lato aperto
+            if Proc.LoopIdFacInd and ( EgtGetInfo( Proc.LoopIdFacInd, 'OPEN', 'i') or -1) > -1 then
+               sMchFind = 'OpenPocket'
+               nUseRoughTool = 0
+            end
             -- se abilitato rinvio da sotto
             if bLapJointAngTrasm then
                if not EgtEndsWith( sMchFind, '_AT') then
@@ -7272,7 +7286,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                   EgtErase( nSurfPartId)
                end
             end
-            -- ricerca lavorazione
+            
+            -- ricerca lavorazione di svuotatura
             local sPocketing
             local _, sMyPocketing, dMyTMaxDepth, dMyTDiam = VerifyPocket( Proc, dDiam, dFacElev + dCollSic, dMaxTotLen, sMchFind, bMillUp, bMillDown)
             if not sMyPocketing and bMillUp then
@@ -7289,6 +7304,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                if ( dMyTMaxDepth > dFacElev + dCollSic - 10 * GEO.EPS_SMALL or ( dMyTMaxDepth > 0.8 * dFacElev + dCollSic and not bIsU) or
                   ( bIsL and nUseRoughTool == 0) or
                   ( bIsL and Proc.Prc == 20) or
+                  ( bIsL and not bSinglePart) or
                   ( Proc.Prc == 25 and not bIsU and not bIsL)) or
                   ( dCustomMaxElev and dCustomMaxElev > 10 * GEO.EPS_SMALL) then
                   sPocketing = sMyPocketing
@@ -7318,7 +7334,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
             local nQAntisplintResult = EgtGetInfo( Proc.Id, Q_ANTISPLINT_TYPE, 'i') or 0
             -- se lavorazione fresa come lama disabilito eventuale antischeggia
             if bSpecialMillOnSide then nQAntisplintResult = 0 end
-            -- se non trovata una svuotatura adatta
+
+            -- NO SVUOTATURA (si deve provare altro)
             if not sPocketing then
                -- se forma a L provo con contornatura
                if bIsL and not bSpecialMillOnSide and not bForceSideMill then
@@ -7664,6 +7681,8 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                      end
                   end
                end
+
+            -- SVUOTATURA OK
             else
                -- se devo inserire il chamfer
                if ( ( Proc.Fct == 3 and bIsU) or (Proc.Fct == 2 and bIsL)) and nChamfer > 0 then
@@ -7995,9 +8014,27 @@ local function MakeLongMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead)
    local bPrevBhSideMill
    for i = 1, #vAddId do
       local b3Box = EgtGetBBoxGlob( vAddId[i], GDB_BB.STANDARD)
-      local nFct = EgtSurfTmFacetCount( vAddId[i])
+      local nFct = EgtSurfTmFacetCount( vAddId[i]) 
       local AddProc = { Id = vAddId[i], Grp = Proc.Grp, Prc = Proc.Prc, Box = b3Box, TotBox = Proc.Box, Fct = nFct, Flg = Proc.Flg, PartId = Proc.PartId, TaskId = Proc.TaskId, FeatureId = Proc.FeatureId, IsSplittedLapJoint = true, AffectedFaces = Proc.AffectedFaces, OkFromBottom = Proc.OkFromBottom}
       Topology.Classify( AddProc, b3Raw)
+
+
+      if i > 1 and 
+         ( ( Proc.Topology == 'Groove' and  Proc.IsThrough and Proc.Fct == 3 and Proc.AffectedFaces.Left and Proc.AffectedFaces.Right)
+         or ( Proc.Topology == 'Groove' and Proc.Fct == 4 and ( Proc.AffectedFaces.Left or Proc.AffectedFaces.Right))
+         or Proc.Topology == 'Pocket') then
+         local nFacInd = BL.GetFaceWithMostAdj( AddProc, nPartId)
+         if type( nFacInd) == "number" and nFacInd >= 0 then
+            local nLoopId, nLoopCnt = EgtExtractSurfTmFacetLoops( vAddId[i], nFacInd, nAddGrpId)
+            if nLoopId and nLoopCnt == 1 then
+               local nEdgeId = BL.GetEdgeToMachineFromVector( vAddId[i], nFacInd, -X_AX())
+               EgtSetInfo( nLoopId, 'OPEN', nEdgeId)
+               AddProc.LoopIdFacInd = nLoopId
+            end
+         end
+      end
+
+
       -- lasciare il false nel sesto parametro (perchè internamente viene verificato se diverso da nil)
       local bOk, sMyWarn
       bOk, sMyWarn, bPrevBhSideMill = MakeMoreFaces( AddProc, nPhase, nRawId, nPartId, dOvmHead, bAllWithEndCap, bPrevBhSideMill, bAllWithEndCap)
@@ -8334,7 +8371,9 @@ function ProcessLapJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             -- leggo i parametri Q per utilizzare la fresa di fianco e/o lama
             local nUseSideTool = EgtGetInfo( Proc.Id, Q_SIDE_ROUGH_TOOL, 'i') or 0
             local bUseBlade = EgtGetInfo( Proc.Id, Q_ANTISPLINT_TYPE, 'i') == 1
-            local bOk, sMyWarn, _, AddedIds = Long2Cut.Make( Proc, nPhase, nRawId, nPartId, bUseBlade, nUseSideTool)
+            -- forzatura lavorazione discorde in base a parametro Q su feature
+            local nQ14Param = EgtGetInfo( Proc.Id, Q_CONVENTIONAL_MILLING, 'd') or 0
+            local bOk, sMyWarn, _, AddedIds = Long2Cut.Make( Proc, nPhase, nRawId, nPartId, bUseBlade, nUseSideTool, nQ14Param)
             -- se non sono riuscito a farlo di lama, riprovo con la fresa
             if not bOk and bUseBlade then
                bUseBlade = false

LuaLibs/ProcessLongDoubleCut.lua

@@ -320,7 +320,7 @@ end
 
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione
-function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster, nUseSideToolMaster)
+function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster, nUseSideToolMaster, nUseConventionalMilling)
    -- recupero l'ingombro del grezzo di appartenenza
    local b3Raw = EgtGetRawPartBBox( nRawId)
    local b3Solid = EgtGetBBoxGlob( EgtGetFirstNameInGroup( nPartId, 'Box') or GDB_ID.NULL, GDB_BB.STANDARD)
@@ -1132,8 +1132,17 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
    elseif ( nSide ~= -1 or BD.DOWN_HEAD or BD.TURN) and nUseMillOnSide == 0 then
       -- determino la massima elevazione
       local dElev = 0
-      local dFacElev1 = BL.GetFaceElevation( Proc, tFaceLong[1], b3Solid)
-      local dFacElev2 = BL.GetFaceElevation( Proc, tFaceLong[2], b3Solid)
+
+      -- calcolo l'elevazione della faccia principale
+      local dFacElev1 = BL.GetFaceElevation( Proc, tFaceLong[vOrd[1]], b3Solid)
+      local dFacElev2 = BL.GetFaceElevation( Proc, tFaceLong[vOrd[2]], b3Solid)
+      local bFacesSwapped = false
+      if bInt and not bConvex and dFacElev1 - 10* GEO.EPS_SMALL > dFacElev2 then
+         vOrd[1], vOrd[2] = vOrd[2], vOrd[1]
+         dFacElev1, dFacElev2 = dFacElev2, dFacElev1
+         bFacesSwapped = true
+      end
+
       -- se facce concave e a 90 gradi, prendo l'elevazione minima
       if bOrtho then
          dElev = min( dFacElev1, dFacElev2)
@@ -1174,10 +1183,10 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
       -- se chiuso e corto, applico svuotatura con fresa opportuna
       if nFaceLimit == 3 and Proc.Box:getDimX() < 2 * dToolDiam then
          -- svuotatura della prima faccia longitudinale
-         local bOk, sErr = MakeByPocketing( Proc, nPhase, nRawId, nPartId, nSide, tFaceLong[1], dFacElev1)
+         local bOk, sErr = MakeByPocketing( Proc, nPhase, nRawId, nPartId, nSide, tFaceLong[vOrd[1]], dFacElev1)
          -- svuotatura della seconda faccia longitudinale
          if not bOk then return bOk, sErr end
-         return MakeByPocketing( Proc, nPhase, nRawId, nPartId, nSide, tFaceLong[2], dFacElev2)
+         return MakeByPocketing( Proc, nPhase, nRawId, nPartId, nSide, tFaceLong[vOrd[2]], dFacElev2)
       end
       -- determino gli estremi
       local dStartDist = 0
@@ -1381,6 +1390,9 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
                   EgtOutLog( sErr)
                   return false, sErr
                end
+               if bFacesSwapped then
+                  dSal, dEal = dEal, dSal
+               end
                -- aggiungo geometria
                EgtSetMachiningGeometry( {{ Proc.Id, tFaceLong[vOrd[i]]}})
                -- limito opportunamente la lavorazione
@@ -1400,6 +1412,28 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
                -- imposto lato di lavoro e inversione
                EgtSetMachiningParam( MCH_MP.WORKSIDE, EgtIf( bIsMachDownUp, MCH_MILL_WS.RIGHT, MCH_MILL_WS.LEFT))
                EgtSetMachiningParam( MCH_MP.INVERT, EgtIf( bSide, true, false))
+               
+               -- si aggiusta la direzione di lavoro in base a rotazione utensile e preferenza utente (nUseConventionalMilling da fuori o Q14)
+               EgtMdbSetCurrMachining( sMilling)
+               local bIsCurrentToolCCW = EgtMdbGetCurrMachiningParam( MCH_MP.SPEED) < 0
+               if nUseConventionalMilling == nil then
+                  nUseConventionalMilling = EgtGetInfo( Proc.Id, 'Q14', 'd') or 0
+               end
+               local bUseConventionalMilling = false
+               if nUseConventionalMilling == 1 or ( nUseConventionalMilling == 2 and vtN[vOrd[i]]:getX() < 0.1 and Proc.AffectedFaces.Bottom) then
+                  bUseConventionalMilling = true
+               end
+               if bIsCurrentToolCCW ~= bUseConventionalMilling then
+                  local dCurrStartAddLen = EgtGetMachiningParam( MCH_MP.STARTADDLEN)
+                  local dCurrEndAddLen = EgtGetMachiningParam( MCH_MP.ENDADDLEN)
+                  local bCurrInvert = EgtGetMachiningParam( MCH_MP.INVERT)
+                  local nCurrWorkside = EgtGetMachiningParam( MCH_MP.WORKSIDE)
+                  EgtSetMachiningParam( MCH_MP.STARTADDLEN, dCurrEndAddLen)
+                  EgtSetMachiningParam( MCH_MP.ENDADDLEN, dCurrStartAddLen)
+                  EgtSetMachiningParam( MCH_MP.INVERT, not bCurrInvert)
+                  EgtSetMachiningParam( MCH_MP.WORKSIDE, EgtIf( nCurrWorkside == MCH_MILL_WS.LEFT, MCH_MILL_WS.RIGHT, MCH_MILL_WS.LEFT))
+               end
+
                -- imposto offset radiale (nullo se concavo o di lato)
                local dOffsR = EgtIf( k < nO, ( nO - k) * dStep, EgtIf( bConvex, - BD.CUT_EXTRA, 0))
                if bSide then dOffsR = 0 end
@@ -1545,6 +1579,12 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
          -- calcolo l'elevazione della faccia principale
       local dFacElev1 = BL.GetFaceElevation( Proc, tFaceLong[vOrd[1]], b3Solid)
       local dFacElev2 = BL.GetFaceElevation( Proc, tFaceLong[vOrd[2]], b3Solid)
+      local bFacesSwapped = false
+      if bInt and not bConvex and dFacElev1 - 10* GEO.EPS_SMALL > dFacElev2 then
+         vOrd[1], vOrd[2] = vOrd[2], vOrd[1]
+         dFacElev1, dFacElev2 = dFacElev2, dFacElev1
+         bFacesSwapped = true
+      end
       -- se fresa di fianco o da sotto calcolo quanto l'utensile può andare vicino al limite se l'elevazione della faccia è minore del raggio utensile
       if nUseMillOnSide <= 1 or nSide == -1 then
          local dFacElev = max( dFacElev1, dFacElev2)
@@ -1643,6 +1683,11 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
             dEndAccDist = 0
          end
       end
+      if Proc.bMoveAfterSplit then
+         nC = 1
+         dStartDist = Proc.Box:getDimX() - ( dToolDiam / 2 + 5)
+         dEndDist = - ( dToolDiam / 2 + 5)
+      end
       -- ciclo sulle parti
       local nM = 0
       for j = 1, nC do
@@ -1725,7 +1770,7 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
                local ptC3 = EgtSurfTmFacetCenter( Proc.Id, tFaceLong[vOrd[i]], GDB_ID.ROOT) 
                local ptDir = ptC3 - ptM ; ptDir:normalize()
                -- se concave e dal versore Z  della faccia (> -20°) o convesso e versore Z ( > -30°) decido se eseguire la lavoraione con la testa da sopra o da sotto  
-               if ( not bConvex and vtN[vOrd[i]]:getZ() > -0.9397 and ptDir:getZ() > 0) or
+               if ( not bConvex and vtN[vOrd[i]]:getZ() > -0.9397 and ptDir:getZ() > -0.017) or
                   ( bConvex and vtN[vOrd[i]]:getZ() > -0.866  and ptDir:getZ() > 0) then
                   sNameF = sPrefix .. ( EgtGetName( Proc.Id) or tostring( Proc.Id)) .. '_' .. tostring( nM)
                   nMchFId = EgtAddMachining( sNameF, sMilling)
@@ -1833,9 +1878,39 @@ function ProcessLong2Cut.Make( Proc, nPhase, nRawId, nPartId, bForcedBladeMaster
                   EgtSetMachiningParam( MCH_MP.FACEUSE, vFaceUse[vOrd[i]])
                end
             end
+
+            if bFacesSwapped then
+               local dCurrStartAddLen = EgtGetMachiningParam( MCH_MP.STARTADDLEN)
+               local dCurrEndAddLen = EgtGetMachiningParam( MCH_MP.ENDADDLEN)
+               EgtSetMachiningParam( MCH_MP.STARTADDLEN, dCurrEndAddLen)
+               EgtSetMachiningParam( MCH_MP.ENDADDLEN, dCurrStartAddLen)
+            end
+
             -- imposto lato di lavoro e inversione
             EgtSetMachiningParam( MCH_MP.WORKSIDE, EgtIf( bIsMachDownUp, MCH_MILL_WS.RIGHT, MCH_MILL_WS.LEFT))
             EgtSetMachiningParam( MCH_MP.INVERT, true)
+
+            -- si aggiusta la direzione di lavoro in base a rotazione utensile e preferenza utente (nUseConventionalMilling da fuori o Q14)
+            EgtMdbSetCurrMachining( sMilling)
+            local bIsCurrentToolCCW = EgtMdbGetCurrMachiningParam( MCH_MP.SPEED) < 0
+            if nUseConventionalMilling == nil then
+               nUseConventionalMilling = EgtGetInfo( Proc.Id, 'Q14', 'd') or 0
+            end
+            local bUseConventionalMilling = false
+            if nUseConventionalMilling == 1 or ( nUseConventionalMilling == 2 and vtN[vOrd[i]]:getX() < 0.1 and Proc.AffectedFaces.Bottom) then
+               bUseConventionalMilling = true
+            end
+            if bIsCurrentToolCCW ~= bUseConventionalMilling then
+               local dCurrStartAddLen = EgtGetMachiningParam( MCH_MP.STARTADDLEN)
+               local dCurrEndAddLen = EgtGetMachiningParam( MCH_MP.ENDADDLEN)
+               local bCurrInvert = EgtGetMachiningParam( MCH_MP.INVERT)
+               local nCurrWorkside = EgtGetMachiningParam( MCH_MP.WORKSIDE)
+               EgtSetMachiningParam( MCH_MP.STARTADDLEN, dCurrEndAddLen)
+               EgtSetMachiningParam( MCH_MP.ENDADDLEN, dCurrStartAddLen)
+               EgtSetMachiningParam( MCH_MP.INVERT, not bCurrInvert)
+               EgtSetMachiningParam( MCH_MP.WORKSIDE, EgtIf( nCurrWorkside == MCH_MILL_WS.LEFT, MCH_MILL_WS.RIGHT, MCH_MILL_WS.LEFT))
+            end
+
             -- calcolo la componente dNz non in base alla classificazione della feature (sopra, sotto, fianchi) ma alla componente maggiore 
 --            local dNz = EgtIf( nSide == 0, vtN[vOrd[i]]:getY(), vtN[vOrd[i]]:getZ())
 --            local dNz = EgtIf( abs(vtN[vOrd[i]]:getY()) >= abs(vtN[vOrd[i]]:getZ()), vtN[vOrd[i]]:getY(), vtN[vOrd[i]]:getZ())

LuaLibs/ProcessSplit.lua

@@ -198,7 +198,13 @@ local function MakeTailChamfer( idProc, nPartId, dDepthTailChamfer)
    EgtSetGridFrame( Frame3d( 0,0,0, GDB_FR.LEFT))
 
    local dQ09Value = EgtGetInfo( idProc, 'Q09', 'd')
+   if not dQ09Value then
+      dQ09Value = 0.1
+   end
    local bChamferedEdge = dQ09Value > 0
+   dQ09Value = EgtIf( bChamferedEdge, max( dQ09Value, 0.1), min( dQ09Value, -0.1))
+
+   
 
    local nIdFirstEntity, nEntityCnt = EgtExplodeCurveCompo( nLoopId)
    local p3MidPoint = EgtMP( nIdFirstEntity, GDB_ID.GRID)
@@ -234,6 +240,9 @@ local function MakeTailChamfer( idProc, nPartId, dDepthTailChamfer)
    end
    EgtChangeClosedCurveStartPoint( idGeom, p3MidPoint, GDB_RT.GRID)
 
+   -- reimposto la griglia
+   EgtSetGridFrame()
+
    -- Inserisco la lavorazione del lato standard
    local dExtra = 2
    local sName1 = 'TailCham_' .. ( EgtGetName( idProc) or tostring( idProc))

Version.lua

@@ -3,4 +3,4 @@
 
 NAME = 'Beam'
 VERSION = '3.1a1'
-MIN_EXE = '2.7f2'
+MIN_EXE = '3.1a4'