In ProfCamb, creato nuovo tipo di lavorazione 'Prof_end' ed eliminata gestione Q06 fatta in precedenza

2.7g4

LuaLibs/FacesBySaw.lua

@@ -83,8 +83,8 @@ function MakeParallelOne( nSurfId, nFacet, sCutting, dSawDiam, nFaceUse, dVzLimD
    if BD.KIOTP then Ktp = BD.KIOTP end
    if ( sLeadInOutType == 'PerpendicularOutraw') then
       bLioTang = false
-      dLiCompLength = dActualElevation + EgtMdbGetGeneralParam( MCH_GP.SAFEZ) + dCutExtra
-      dLoCompLength = dActualElevation + EgtMdbGetGeneralParam( MCH_GP.SAFEZ) + dCutExtra
+      dLiCompLength = dActualElevation + EgtMdbGetGeneralParam( MCH_GP.SAFEZ)
+      dLoCompLength = dActualElevation + EgtMdbGetGeneralParam( MCH_GP.SAFEZ)
       dLiTang = 1
       dLoTang = 1
       dLiPerp = 0

LuaLibs/ProcessLapJoint.lua

@@ -794,7 +794,7 @@ function ProcessLapJoint.IsTailFeature( Proc, b3Raw)
    -- verifico se è in coda
    local dEndDist = Proc.Box:getMin():getX() - b3Solid:getMin():getX()
    if ( dEndDist > BD.MAX_DIST_HTFEA) or bUseBHSideMill then
-      if not( BD.BH_MACHINE) and bUseBHSideMill and ( Proc.Box:getMax():getX() - b3Solid:getMin():getX()) < 400 then
+      if not( BD.BH_MACHINE) and bUseBHSideMill and ( Proc.Box:getMax():getX() - b3Solid:getMin():getX()) < 400 and b3Solid:getDimX() > BD.LEN_VERY_SHORT_PART then
          return true
       else
          return false
@@ -3398,6 +3398,10 @@ local function MakeAntiSplintBySaw( Proc, nFacet, vtN, b3Raw, nFacInd, bReduceDe
       end
    end
    local dExtraOffs = 0
+   -- se il taglio è praticamente verticale, riduto massimo materiale lama
+   if BD.DECR_VERT_CUT and vtN:getZ() > 0.985 then
+      dMaxDepth = dMaxDepth - BD.DECR_VERT_CUT - BD.COLL_SIC
+   end
    -- se profondità superiore al massimo lama modifico elevazione
    if dDepth > dMaxDepth then
       dExtraOffs = dMaxDepth - dDepth

LuaLibs/ProcessProfCamb.lua

@@ -33,7 +33,6 @@ local sEnableExtraBladeUpperFace = 'Q02' -- i
 local sDepthChamferMill          = 'Q03' -- d
 local sOverMaterialForFinish     = 'Q04' -- d
 local sPreemptiveChamfer         = 'Q05' -- i
-local bUseSmallMill              = 'Q06' -- i
 
 -- abilitazioni extra
 local dMakeAntiSplintOnHead = 1 -- valore impronta antischeggia, per disattivare settare = nil o = 0
@@ -208,36 +207,31 @@ local function VerifyCham( Proc, AuxId, nRawId, bMakeVertCham, sDephtCham, sOnly
 end
 
 ---------------------------------------------------------------------
-function VerifySmallMillCanFinish( dDiamCurrentTool, dDepthProfile, nSide)
-   local dToolMaxDepthSmall, dToolDiamSmall
+function VerifyOtherMillCanFinish( dDepthProfile, nSide)
+   local dToolMaxDepthFinish
    -- abilitazione lavorazione da sotto
-   local sMillType = 'Prof'
-   local sMillingSmall, _, _, bH2Small = ML.FindMilling( sMillType, nil, nil, nil, nil, true, nil, nil, nil, 'Smallest')
-   if not sMillingSmall then
+   local sMillType = 'Prof_end'
+   local sMillingFinish, _, _, _ = ML.FindMilling( sMillType, nil, nil, nil, nil, true, nil, nil, nil)
+   if not sMillingFinish then
       return false
    end
    -- Recupero i dati dell'utensile
-   if EgtMdbSetCurrMachining( sMillingSmall) then
+   if EgtMdbSetCurrMachining( sMillingFinish) then
       local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
       if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid)) then
-         dToolMaxDepthSmall = EgtTdbGetCurrToolMaxDepth()
-         dToolDiamSmall = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
-         -- se non ci sono almeno 5mm di differenza si fa con utensile standard
-         if dDiamCurrentTool - 5 < dToolDiamSmall then
-            return false
-         end
+         dToolMaxDepthFinish = EgtTdbGetCurrToolMaxDepth()
       end
    else
       return false
    end
-   local bDouble = ( dDepthProfile + BD.CUT_EXTRA > dToolMaxDepthSmall)
+   local bDouble = ( dDepthProfile + BD.CUT_EXTRA > dToolMaxDepthFinish)
    -- se lavorazione in doppio richiesta, si verifica se richiesta testa sotto
    if bDouble and nSide == 0 then
       return false  -- TODO macchine con BD.DOWN_HEAD potrebbero lavorare in doppio in questo caso!
    end
 
-   if not bDouble or ( dDepthProfile + BD.MILL_OVERLAP < dToolMaxDepthSmall * 2) then
-      return true, sMillingSmall, bDouble
+   if not bDouble or ( dDepthProfile + BD.MILL_OVERLAP < dToolMaxDepthFinish * 2) then
+      return true, sMillingFinish, bDouble
    end
    return false
 end
@@ -506,12 +500,8 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    end
 
 
-   local bUseSmallMillOnFinish = EgtGetInfo( Proc.Id, bUseSmallMill, 'i') == 1
-   local sMillingSmall, bDoubleSmall
-   -- se serve fresa più piccola per finitura
-   if bUseSmallMillOnFinish then
-      bUseSmallMillOnFinish, sMillingSmall, bDoubleSmall = VerifySmallMillCanFinish( dMillDiam, dProfDepth, nSide)
-   end
+   -- se configurata fresa di finitura
+   local bUseOtherMillOnFinish, sFinishMilling, bDoubleFinishMill = VerifyOtherMillCanFinish( dProfDepth, nSide)
 
    -- se il chamfer non è esclusivo continuo con le altre lavorazioni
    if nChamfer < 2 then
@@ -608,7 +598,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
             nMchId = nMch2Id
          end
          -- se abilitata, aggiungo lavorazione di finitura
-         if bFinish and not bUseSmallMillOnFinish then
+         if bFinish and not bUseOtherMillOnFinish then
             -- inserisco la lavorazione
             local sNewName = 'ProfB_Fin_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
             local nMch2Id = EgtCopyMachining( sNewName, EgtGetName( nMchId)) 
@@ -723,7 +713,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          nMchId = nMch2Id
       end
       -- se abilitata, aggiungo lavorazione di finitura
-      if bFinish and not bUseSmallMillOnFinish then
+      if bFinish and not bUseOtherMillOnFinish then
          -- inserisco la lavorazione
          local sNewName = 'Prof_Fin_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
          local nMch2Id = EgtCopyMachining( sNewName, EgtGetName( nMchId)) 
@@ -780,12 +770,12 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          end
       end
       -- se finitura con fresa piccola
-      if bFinish and bUseSmallMillOnFinish then
-         local sDepthSmall = EgtIf( bDoubleSmall, ( dProfDepth+ BD.MILL_OVERLAP ) / 2, dProfDepth + BD.CUT_EXTRA)
+      if bFinish and bUseOtherMillOnFinish then
+         local sDepthFinishMill = EgtIf( bDoubleFinishMill, ( dProfDepth+ BD.MILL_OVERLAP ) / 2, dProfDepth + BD.CUT_EXTRA)
          local sMachName = 'Fin_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
-         nMchId = EgtAddMachining( sMachName, sMillingSmall)
+         nMchId = EgtAddMachining( sMachName, sFinishMilling)
          if not nMchId then
-            local sErr = 'Error adding machining ' .. sMachName .. '-' .. sMillingSmall
+            local sErr = 'Error adding machining ' .. sMachName .. '-' .. sFinishMilling
             EgtOutLog( sErr)
             return false, sErr
          end
@@ -793,7 +783,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
          EgtSetMachiningGeometry( {{ AuxId, -1}})
 
          -- imposto l'affondamento
-         EgtSetMachiningParam( MCH_MP.DEPTH, sDepthSmall)
+         EgtSetMachiningParam( MCH_MP.DEPTH, sDepthFinishMill)
          -- posizione braccio porta testa
          EgtSetMachiningParam( MCH_MP.SCC, EgtIf( bHead, MCH_SCC.ADIR_XP, MCH_SCC.ADIR_XM))
          -- eseguo
@@ -803,7 +793,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
             return false, sErr
          end
 
-         if bDoubleSmall then
+         if bDoubleFinishMill then
             local sNewName = 'FinB_' .. ( EgtGetName( Proc.Id) or tostring( Proc.Id))
             local nMch2Id = EgtCopyMachining( sNewName, EgtGetName( nMchId))
             EgtSetMachiningParam( MCH_MP.TOOLINVERT, true)

UpdateLog.txt

@@ -1,5 +1,8 @@
            ==== Beam Update Log ====
 
+Versione 2.7g5 (14/07/2025)
+- Fixed : in tagli di testa e coda corretti attacchi
+
 Versione 2.7g4 (11/07/2025)
 - Fixed : in LapJoint 2 facce correzione nella scelta lama da sotto
 

Version.lua

@@ -2,5 +2,5 @@
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '2.7g4'
+VERSION = '2.7g5'
 MIN_EXE = '2.7f2'