Merge branch 'feature/RidgeLapAndLapJointToLongcutModify' into develop

- in RidgeLap abilitato Q04 come LapJoint, se riconducibile a 2 facce
- GetFacetsInfo richiamata ogni volta che c'è uno swap di facce
- In LapJoint -> MakePocket abilitata Q per forzare massima elevazione

LuaLibs/BeamLib.lua

@@ -1267,5 +1267,32 @@ function BeamLib.GetMachiningSteps( dMachiningDepth, dStep)
    return MachiningSteps
 end
 
+-------------------------------------------------------------------------------------------------------------
+function BeamLib.IsCutNeeded( Proc, b3Raw, dOvmHead, dOvmTail)
+   if not dOvmTail then
+      dOvmTail = BD.OVM_MID
+   end
+   local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, 0, GDB_ID.ROOT)
+
+   if Proc.Head then
+      -- se coincide con il taglio di separazione precedente, non va fatto
+      if AreSameVectorApprox( vtN, X_AX())  and  abs( ptC:getX() - b3Raw:getMax():getX() + dOvmHead) < 10 * GEO.EPS_SMALL then
+         return false
+      end
+   -- altrimenti taglio di coda
+   else
+      -- se coincide con taglio di separazione, non va fatto
+      if AreSameVectorApprox( vtN, - X_AX())  and  abs( ptC:getX() - b3Raw:getMin():getX()) < dOvmTail + 10 * GEO.EPS_SMALL then
+         return false
+      end
+   end
+   -- se coincide con un taglio frontale non va fatto
+   if Proc.CutFront then
+      return false
+   end
+   
+   return true
+end
+
 -------------------------------------------------------------------------------------------------------------
 return BeamLib

LuaLibs/DiceCut.lua

@@ -155,7 +155,7 @@ local function GetOrtoCutCenter( FacetId, ptC, vtN, vtO, dOffsetEff, dNzLimDwnUp
    -- se faccia non troppo lunga, con un lato piccolo e non diretta troppo verso il basso, non servono dice
    local dMaxLen = BD.MAX_LEN_DICE or 600
    if dLen < dMaxLen and dWidth < dMaxLen and
-      ( dLen < dOffsetEff + 1.0 or dWidth < dOffsetEff + 1.0) and vtN:getZ() > dNzLimDwnUp then
+      ( dLen < dOffsetEff + 1.0 or dWidth < dOffsetEff + 1.0) and ( vtN:getZ() > dNzLimDwnUp or BD.DOWN_HEAD) then
       return nil, nil, nil
    end
 

LuaLibs/FacesBySaw.lua

@@ -407,7 +407,10 @@ function FacesBySaw.MakeOne( nSurfId, nFacet, sCutting, dSawDiam, Par5, dVzLimDw
    EgtOutLog( 'vtN=' .. tostring( vtN) .. ' vtRef=' .. tostring( vtRef) .. ' vtOut=' .. tostring( vtOut) .. ' vtAux=' .. tostring( vtAux), 3)
    local nSCC = MCH_SCC.NONE
    if not BD.TURN then
-      if abs( vtAux:getX()) > abs( vtAux:getY()) - GEO.EPS_SMALL then
+      -- per ora aggregato usato in verticale solo in split e headcut; Fast non influenzata
+      if BD.C_SIMM and bMaximizeVerticalDepth then
+         nSCC = MCH_SCC.ADIR_ZM
+      elseif abs( vtAux:getX()) > abs( vtAux:getY()) - GEO.EPS_SMALL then
          nSCC = EgtIf( ( vtAux:getX() > -GEO.EPS_SMALL), MCH_SCC.ADIR_XP, MCH_SCC.ADIR_XM)
       else
          nSCC = EgtIf( ( vtAux:getY() > -GEO.EPS_SMALL), MCH_SCC.ADIR_YP, MCH_SCC.ADIR_YM)

LuaLibs/MachiningLib.lua

@@ -356,16 +356,16 @@ local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead,
    end
    if ( BEAM and BEAM.BW) or MachineHeadType == ONE_HEAD or MachineHeadType == TWO_EQUAL_HEADS or ( MachineHeadType == TWO_UP_DOWN_HEADS and not bDownHead) then
       _, sType = EgtEndsWith( sType, '_H2')
-   elseif ( not BEAM or not BEAM.BW) and MachineHeadType == TWO_UP_DOWN_HEADS and bDownHead then
+   elseif not ( BEAM and BEAM.BW) and MachineHeadType == TWO_UP_DOWN_HEADS and bDownHead then
       if not EgtEndsWith( sType, '_H2') then
          sType = sType .. '_H2'
       end
    end
    local MachineHeadUse = MachineHeadType
-   if not BEAM or not BEAM.BW then
+   if not ( BEAM and BEAM.BW) and MachineHeadUse == TWO_EQUAL_HEADS then
       MachineHeadUse = ONE_HEAD
    end
-   if BEAM and BEAM.BW and MachineHeadUse == TWO_UP_DOWN_HEADS and bTopHead and bDownHead then
+   if MachineHeadUse == TWO_UP_DOWN_HEADS and bTopHead and bDownHead then
       -- se posso usare entrambe le teste, la gestisco come una macchina a due teste da sopra
       MachineHeadUse = TWO_EQUAL_HEADS
    end
@@ -374,7 +374,7 @@ local function FindMachining( MachiningType, sType, Params, bTopHead, bDownHead,
    for i = ForStart, ForEnd, ForStep do
       local Machining = Machinings[i]
       local sMachiningType = Machining.Type
-      if BEAM and BEAM.BW then
+      if ( BEAM and BEAM.BW) or MachineHeadUse == TWO_EQUAL_HEADS then
          _, sMachiningType = EgtEndsWith( Machining.Type, '_H2')
       end
       -- recupero dati utensile

LuaLibs/ProcessCut.lua

@@ -821,20 +821,7 @@ function ProcessCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom,
    local ptC, vtN = EgtSurfTmFacetCenter( Proc.Id, 0, GDB_ID.ROOT)
    -- se taglio di testa
    if not bForced then
-      if Proc.Head then
-         -- se coincide con il taglio di separazione precedente, non va fatto
-         if AreSameVectorApprox( vtN, X_AX())  and  abs( ptC:getX() - b3Raw:getMax():getX() + dOvmHead) < 10 * GEO.EPS_SMALL then
-            return true
-         end
-      -- altrimenti taglio di coda
-      else
-         -- se coincide con taglio di separazione, non va fatto
-         if AreSameVectorApprox( vtN, - X_AX())  and  abs( ptC:getX() - b3Raw:getMin():getX()) < dOvmTail + 10 * GEO.EPS_SMALL then
-            return true
-         end
-      end
-      -- se coincide con un taglio frontale non va fatto
-      if Proc.CutFront then
+      if not BL.IsCutNeeded( Proc, b3Raw, dOvmHead, dOvmTail) then
          return true
       end
    end

LuaLibs/ProcessLapJoint.lua

@@ -203,6 +203,8 @@ local function AssignQIdent( Proc)
       Q_BLADE_ON_ALONG_FACE = 'Q04' -- i
       Q_ANTISPLINT_TYPE     = 'Q06' -- i
       Q_DEPTH_CHAMFER       = 'Q07' -- d
+   elseif ( Proc.Grp == 1 or Proc.Grp == 2)  and  Proc.Prc == 30 then
+      Q_BLADE_ON_ALONG_FACE = 'Q04' -- i
    elseif ( Proc.Grp == 3 or Proc.Grp == 4)  and  Proc.Prc == 32 then
       Q_SIDE_ROUGH_TOOL     = 'Q01' -- i
       Q_CONTOUR_SMALL_TOOL  = 'Q02' -- i
@@ -553,7 +555,7 @@ local function VerifySideMillAsSaw( Proc, nAddGrpId, vtN, dDiam, dFacElev)
    -- cancello la copia del percorso
    EgtErase( nTestId)
    -- eseguo test
-  if not bNewIsU and not Proc.TopologyLongName == 'Rabbet-Through-RightAngles-Parallel-2' then
+  if not bNewIsU and not ( Proc.TopologyLongName == 'Rabbet-Through-RightAngles-Parallel-2') then
      return false
   end
    -- Verifico sia abbastanza lunga
@@ -3339,7 +3341,11 @@ local function MakePocket( Proc, nPartId, b3Solid, ptPs, tvtN, nFaceRef, sMchFin
       EgtOutLog( sWarn)
    end
    -- imposto elevazione e dichiaro non si generano sfridi per VMill
-   local sNotes = 'MaxElev=' .. EgtNumToString( dElev, 1) .. ';'
+   -- eventuale massima elevazione imposta dall'utente
+   local dMaxElev = EgtGetInfo( Proc.Id, Q_MAX_ELEVATION, 'd')
+   if dMaxElev and dMaxElev < 1 then dMaxElev = nil end
+   dMaxElev = dMaxElev or dElev
+   local sNotes = 'MaxElev=' .. EgtNumToString( dMaxElev, 1) .. ';'
    sNotes = sNotes .. 'VMRS=0;'
    if bOpenOutRaw then
       sNotes = sNotes .. 'OpenOutRaw=1;'
@@ -4617,8 +4623,6 @@ end
 
 -- TODO gestione messaggi in funzione apposita (almeno per append)
 
--- TODO gestire topologia tunnel (anche da due lati)
-
 local SawPlusChain =  {}
 SawPlusChain.Saw = {}
 SawPlusChain.Chainsaw = {}
@@ -4681,6 +4685,7 @@ function SawPlusChain.GetTunnelFaces( Proc)
    if TunnelAddedFaces.MiddleFaceTm.Height > TunnelAddedFaces.MiddleFaceTm.Width then
       TunnelAddedFaces.MiddleFaceTm.Height, TunnelAddedFaces.MiddleFaceTm.Width = TunnelAddedFaces.MiddleFaceTm.Width, TunnelAddedFaces.MiddleFaceTm.Height
    end
+   TunnelAddedFaces.MiddleFaceTm.Type = 'Tunnel'
 
    return TunnelAddedFaces
 end
@@ -4712,6 +4717,7 @@ function SawPlusChain.GetBottomFace( Proc)
    end
 
    BottomFace.Id = nBottomFace
+   BottomFace.Type = 'Bottom'
    BottomFace.Width = Proc.Face[nBottomFace + 1].Width
    BottomFace.Height = Proc.Face[nBottomFace + 1].Height
    BottomFace.Elevation = Proc.Face[nBottomFace + 1].Elevation
@@ -4725,6 +4731,7 @@ end
 
 
 function SawPlusChain.GetLongFace( Proc)
+   local LongFace = {}
    if not Proc.MainFaces.BottomFace or not Proc.MainFaces.BottomFace.Id then
       Proc.MainFaces.BottomFace = SawPlusChain.GetBottomFace( Proc)
    end
@@ -4746,10 +4753,10 @@ function SawPlusChain.GetLongFace( Proc)
    end
 
    -- si sceglie la più grande (tunnel) o quella adiacente sul lato lungo
-   local LongFace = {}
    LongFace.Id = FacesToAnalyze[1].Id
    for i = 1, Proc.Fct do
       if LongFace.Id == Proc.Face[i].Id then
+         LongFace.Type = 'Long'
          LongFace.Width = Proc.Face[i].Width
          LongFace.Height = Proc.Face[i].Height
          LongFace.Elevation = Proc.Face[i].Elevation
@@ -4760,8 +4767,6 @@ function SawPlusChain.GetLongFace( Proc)
       end
    end
 
-   LongFace.Edges = SawPlusChain.GetLongFaceEdges( Proc, LongFace)
-
    return LongFace
 end
 
@@ -4799,6 +4804,7 @@ function SawPlusChain.GetSideFaces( Proc)
          ( bIsLongFaceTheLargest and i > 2) then
          table.insert( SideFaces, FacesToAnalyze[i])
          SideFaces[#SideFaces].Id = FacesToAnalyze[i].Id
+         SideFaces[#SideFaces].Type = 'Side'
          SideFaces[#SideFaces].Width = Proc.Face[FacesToAnalyze[i].Id + 1].Width
          SideFaces[#SideFaces].Height = Proc.Face[FacesToAnalyze[i].Id + 1].Height
          SideFaces[#SideFaces].Elevation = Proc.Face[FacesToAnalyze[i].Id + 1].Elevation
@@ -4813,6 +4819,51 @@ function SawPlusChain.GetSideFaces( Proc)
 end
 
 
+function SawPlusChain.GetBottomFaceEdges( Proc, Face)
+   local Edges = {}
+   Edges.SideEdges = {}
+   Edges.LongEdges = {}
+
+   local nFaceType, vEdges = EgtSurfTmGetFacetOutlineInfo( Proc.Id, Face.Id, GDB_ID.ROOT)
+   if nFaceType < 1 then
+      for j = 1, #vEdges do
+         local nPreviousEdgeIndex = j - 1
+         if j == 1 then
+            nPreviousEdgeIndex = #vEdges
+         end
+         local nNextEdgeIndex = j + 1
+         if j == #vEdges then
+            nNextEdgeIndex = 1
+         end
+
+         local CurrentEdge = {}
+         CurrentEdge.AdjacentFaceId = vEdges[j].Adj
+         CurrentEdge.ToolDirection = Vector3d( vEdges[j].Norm)
+         CurrentEdge.Length = vEdges[j].Len
+         CurrentEdge.Elevation = vEdges[j].Elev
+         CurrentEdge.IsOpen = vEdges[j].Open
+         CurrentEdge.IsStartOpen = ( vEdges[nPreviousEdgeIndex].Open)
+         CurrentEdge.IsEndOpen = ( vEdges[nNextEdgeIndex].Open)
+
+         if CurrentEdge.AdjacentFaceId == Proc.MainFaces.LongFace.Id then
+            table.insert( Edges.LongEdges, CurrentEdge)
+            Edges.LongEdges[#Edges.LongEdges].Type = 'Long'
+         elseif vEdges[nNextEdgeIndex].Adj == Proc.MainFaces.LongFace.Id or vEdges[nPreviousEdgeIndex].Adj == Proc.MainFaces.LongFace.Id then
+            table.insert( Edges.SideEdges, CurrentEdge)
+            Edges.SideEdges[#Edges.SideEdges].Type = 'Side'
+         else
+            table.insert( Edges.LongEdges, CurrentEdge)
+            Edges.LongEdges[#Edges.LongEdges].Type = 'Long'
+         end
+      end
+   else
+      error( 'Face with closed hole')
+   end
+
+   return Edges
+end
+
+
 function SawPlusChain.GetLongFaceEdges( Proc, Face)
    local Edges = {}
    Edges.SideEdges = {}
@@ -4848,12 +4899,16 @@ function SawPlusChain.GetLongFaceEdges( Proc, Face)
          else
             if CurrentEdge.AdjacentFaceId == Proc.MainFaces.BottomFace.Id then
                Edges.BottomEdge = CurrentEdge
+               Edges.BottomEdge.Type = 'Bottom'
             elseif vEdges[nNextEdgeIndex].Adj == Proc.MainFaces.BottomFace.Id then
                Edges.SideEdges.StartEdge = CurrentEdge
+               Edges.SideEdges.StartEdge.Type = 'Side'
             elseif vEdges[nPreviousEdgeIndex].Adj == Proc.MainFaces.BottomFace.Id then
                Edges.SideEdges.EndEdge = CurrentEdge
+               Edges.SideEdges.EndEdge.Type = 'Side'
             else
                table.insert( Edges.OppositeEdges, CurrentEdge)
+               Edges.OppositeEdges[#Edges.OppositeEdges].Type = 'Opposite'
             end
          end
       end
@@ -5081,7 +5136,11 @@ function SawPlusChain.Saw.CalculateMachiningParameters( Proc, FaceToMachine, Edg
    if Proc.Topology == 'Tunnel' then
       dPocketHeight = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Height
    else
-      dPocketHeight = Proc.MainFaces.BottomFace.Height
+      if FaceToMachine.Type == 'Long' then
+         dPocketHeight = Proc.MainFaces.BottomFace.Edges.SideEdges[1].Length
+      elseif FaceToMachine.Type == 'Side' then
+         dPocketHeight = Proc.MainFaces.BottomFace.Edges.LongEdges[1].Length
+      end
    end
 
    -- ricerca lavorazione
@@ -5242,32 +5301,43 @@ function SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, FaceToMachine
    Mortising.CanApply = true
    Mortising.Message = ''
    Mortising.ProcId = Proc.Id
+   local bNeedToMachineOtherSide = false
    local dTestCornerRadius = 43
+   -- OneSide | OneSideAndExtend | BothSides | BothSidesAndExtend
    local sMortisingType
    
    local dPocketHeight = 0
    if Proc.Topology == 'Tunnel' then
       dPocketHeight = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Height
    else
-      dPocketHeight = Proc.MainFaces.BottomFace.Height
+      if FaceToMachine.Type == 'Long' then
+         dPocketHeight = Proc.MainFaces.BottomFace.Edges.SideEdges[1].Length
+      elseif FaceToMachine.Type == 'Side' then
+         dPocketHeight = Proc.MainFaces.BottomFace.Edges.LongEdges[1].Length
+      end
    end
 
    -- ricerca lavorazione
    if Proc.Topology == 'Tunnel' then
       Mortising.Name = ML.FindSawing( 'Sawing', abs( EdgeToMachine.Elevation) + dTestCornerRadius + BD.CUT_EXTRA_MIN)
-      sMortisingType = "OneSideAndExtend"
+      sMortisingType = 'OneSideAndExtend'
       if not Mortising.Name then
          Mortising.Name = ML.FindSawing( 'Sawing', abs( EdgeToMachine.Elevation) / 2 + dTestCornerRadius + BD.CUT_EXTRA_MIN)
-         sMortisingType = "BothSidesAndExtend"
+         sMortisingType = 'BothSidesAndExtend'
       end
+   elseif EdgeToMachine.Type == 'Side' and #( Proc.MainFaces.SideFaces) == 0 then
+      Mortising.Name = ML.FindSawing( 'Sawing', abs( EdgeToMachine.Elevation) / 2 + dTestCornerRadius + BD.CUT_EXTRA_MIN)
+      sMortisingType = 'BothSidesAndExtend'
    else
       Mortising.Name = ML.FindSawing( 'Sawing', abs( EdgeToMachine.Elevation))
-      sMortisingType = "OneSide"
+      sMortisingType = 'OneSide'
    end
    if not Mortising.Name then
       Mortising.Name = ML.FindSawing( 'Sawing', nil, nil, 'Longest')
-      if Proc.Topology == 'Tunnel' then
-         sMortisingType = "BothSides"
+      if sMortisingType == 'BothSidesAndExtend' then
+         sMortisingType = 'BothSides'
+      elseif sMortisingType == 'OneSideAndExtend' then
+         sMortisingType = 'OneSide'
       end
    end
    if not Mortising.Name then
@@ -5311,14 +5381,16 @@ function SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, FaceToMachine
       Mortising.ToolInvert = true
    end
    -- profondità e offset longitudinale
-   if sMortisingType == "OneSide" then
+   if sMortisingType == 'OneSide' then
       Mortising.Depth = abs( EdgeToMachine.Elevation)
    elseif sMortisingType == 'OneSideAndExtend' then
       Mortising.Depth = abs( EdgeToMachine.Elevation) + Mortising.Tool.CornerRadius + BD.CUT_EXTRA_MIN
    elseif sMortisingType == 'BothSides' then
       Mortising.Depth = abs( EdgeToMachine.Elevation) / 2
+      bNeedToMachineOtherSide = true
    elseif sMortisingType == 'BothSidesAndExtend' then
       Mortising.Depth = abs( EdgeToMachine.Elevation) / 2 + Mortising.Tool.CornerRadius + BD.CUT_EXTRA_MIN
+      bNeedToMachineOtherSide = true
    end
    if Mortising.Tool.MaxMat > Mortising.Depth - 10 * GEO.EPS_SMALL then
       if EdgeToMachine.Elevation > -10 * GEO.EPS_SMALL then
@@ -5379,7 +5451,7 @@ function SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, FaceToMachine
       EgtOutLog( sDamageNextPieceMessage)
    end
 
-   return Mortising
+   return Mortising, bNeedToMachineOtherSide
 end
 
 
@@ -5434,7 +5506,10 @@ function SawPlusChain.Make( bOnlySaw, Proc, nRawId)
    Proc.MainFaces.SideFaces = SawPlusChain.GetSideFaces( Proc)
    if Proc.Topology == 'Tunnel' then
       Proc.MainFaces.TunnelAddedFaces = SawPlusChain.GetTunnelFaces( Proc)
+   else
+      Proc.MainFaces.BottomFace.Edges = SawPlusChain.GetBottomFaceEdges( Proc, Proc.MainFaces.BottomFace)
    end
+   Proc.MainFaces.LongFace.Edges = SawPlusChain.GetLongFaceEdges( Proc, Proc.MainFaces.LongFace)
 
    -- lama
    -- lavorazione di lama - fondo della tasca o fino a massimo materiale se tunnel
@@ -5452,7 +5527,6 @@ function SawPlusChain.Make( bOnlySaw, Proc, nRawId)
       return bIsCuttingOk, Cutting.Message
    end
    local dBottomDepthToMachine = Cutting.RadialOffset
-
    -- lato opposto del tunnel
    if Proc.Topology == 'Tunnel' then
       Cutting = SawPlusChain.Saw.CalculateMachiningParameters( Proc, Proc.MainFaces.LongFace, Proc.MainFaces.LongFace.Edges.OppositeEdges[2])
@@ -5501,8 +5575,9 @@ function SawPlusChain.Make( bOnlySaw, Proc, nRawId)
    -- sega a catena
    -- parametri lavorazione con sega a catena - fondo della tasca o tunnel
    local Mortising = {}
+   local bNeedToMachineOtherSide = false
    if Proc.Topology == 'Tunnel' then
-      Mortising = SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, Proc.MainFaces.LongFace, Proc.MainFaces.LongFace.Edges.OppositeEdges[1])
+      Mortising, bNeedToMachineOtherSide = SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, Proc.MainFaces.LongFace, Proc.MainFaces.LongFace.Edges.OppositeEdges[1])
    else
       Mortising = SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, Proc.MainFaces.LongFace, Proc.MainFaces.LongFace.Edges.BottomEdge)
       -- si lavora solo quanto non lavorato dalla lama
@@ -5512,9 +5587,8 @@ function SawPlusChain.Make( bOnlySaw, Proc, nRawId)
    if Mortising.CanApply then
       bIsMortisingOk, Mortising.Message = SawPlusChain.Chainsaw.ApplyAllSteps( Mortising, b3Raw)
    end
-
    -- lato opposto del tunnel
-   if Proc.Topology == 'Tunnel' then
+   if Proc.Topology == 'Tunnel' and bNeedToMachineOtherSide then
       Mortising = SawPlusChain.Chainsaw.CalculateMachiningParameters( Proc, Proc.MainFaces.LongFace, Proc.MainFaces.LongFace.Edges.OppositeEdges[2])
       bIsMortisingOk = false
       if Mortising.CanApply then
@@ -6853,6 +6927,7 @@ local function MakeStaircaseStep( Proc, nRawId, b3Raw, nPartId)
    local nFacetRiser, nFacetTread = 0, 1
    if abs( vtNRiser:getZ()) > abs( vtNTread:getZ()) then
       EgtSurfTmSwapFacets( Proc.Id, 0, 1)
+      Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
       vtNRiser, vtNTread = vtNTread, vtNRiser
    end
    -- riferimenti e dimensioni delle facce
@@ -7078,7 +7153,8 @@ function ProcessLapJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
    end
    -- se lunghezza richiede spezzatura
    if ( Proc.Box:getDimX() > BD.LONGCUT_MAXLEN) or
-      ( Proc.Box:getDimX() > 0.7 * b3Solid:getDimX() and Proc.Box:getDimX() > BD.LONGCUT_ENDLEN) then
+      ( Proc.Box:getDimX() > 0.7 * b3Solid:getDimX() and Proc.Box:getDimX() > BD.LONGCUT_ENDLEN) or
+      ( ( nForceUseBladeOnNotContinueFace and nForceUseBladeOnNotContinueFace > 0) and ( Proc.Box:getDimX() > BD.LEN_SHORT_PART or 1000)) then
       -- una faccia
       if Proc.Fct == 1 then
          if bUseBlade then
@@ -7117,6 +7193,7 @@ function ProcessLapJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          elseif b3Fac1:getDimX() < 1 and abs( vtN2:getX()) < GEO.EPS_SMALL then
             -- la faccia 0 deve essere quella lunga
             EgtSurfTmSwapFacets( Proc.Id, 0, 1)
+            Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
             if bUseBlade then
                if nForceUseBladeOnNotContinueFace and nForceUseBladeOnNotContinueFace > 0 then
                   return LongCut.Make( Proc, nPhase, nRawId, nPartId, bUseBlade, nForceUseBladeOnNotContinueFace)
@@ -7156,10 +7233,12 @@ function ProcessLapJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          if b3Fac1:getDimX() < 1 and b3Fac3:getDimX() < 1 then
             -- la faccia 0 deve essere quella lunga
             EgtSurfTmSwapFacets( Proc.Id, 0, 1)
+            Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
             bApplyBladeOnLongNotContinueFace = true
          elseif b3Fac1:getDimX() < 1 and b3Fac2:getDimX() < 1 then
             -- la faccia 0 deve essere quella lunga
             EgtSurfTmSwapFacets( Proc.Id, 0, 2)
+            Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
             bApplyBladeOnLongNotContinueFace = true
          elseif b3Fac2:getDimX() < 1 and b3Fac3:getDimX() < 1 then
             bApplyBladeOnLongNotContinueFace = true

LuaLibs/ProcessRidgeLap.lua

@@ -10,6 +10,7 @@ local BL = require( 'BeamLib')
 local Fbs = require( 'FacesBySaw')
 local Cut = require( 'ProcessCut')
 local DC = require( 'DiceCut')
+local LapJoint = require( 'ProcessLapJoint')
 
 EgtOutLog( ' ProcessRidgeLap started', 1)
 
@@ -48,6 +49,7 @@ end
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione
 function ProcessRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
+   local nForceUseBladeOnNotContinueFace = EgtGetInfo( Proc.Id, 'Q04', 'i') or 0
    -- recupero l'ingombro del grezzo di appartenenza
    local b3Raw = EgtGetRawPartBBox( nRawId)
    -- ingombro del pezzo
@@ -133,8 +135,15 @@ function ProcessRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          local b3Cut = EgtGetBBoxGlob( AddId or GDB_ID.NULL, GDB_BB.STANDARD)
          local CutProc = { Id = AddId, Grp = Proc.Grp, Prc = Proc.Prc, Box = b3Cut, Fct = 1, Flg = Proc.Flg,
                            Head = Proc.Head, Tail = Proc.Tail, CutId = Proc.CutId, TaskId = Proc.TaskId}
-         local bOk, sErr = Cut.Make( CutProc, nPhase, nRawId, nPartId, dOvmHead, false)
-         if not bOk then return bOk, sErr end
+         if BL.IsCutNeeded( CutProc, b3Raw, dOvmHead) then
+            local bOk, sErr = Cut.Make( CutProc, nPhase, nRawId, nPartId, dOvmHead, false)
+            if not bOk then return bOk, sErr end
+         elseif nForceUseBladeOnNotContinueFace > 0 then
+            EgtSurfTmRemoveFacet( Proc.Id, vFaceOrd[1] - 1)
+            Proc.Fct = Proc.Fct - 1
+            Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
+            return LapJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
+         end
       end
    end
    -- recupero gruppo per geometria addizionale

LuaLibs/ProcessStepJoint.lua

@@ -320,10 +320,12 @@ local function MakeThreeFaces( Proc, nPhase, nRawId, nPartId, dOvmHead)
    if bAdj12 then
       if dAng12 < 0 then
          EgtSurfTmSwapFacets( Proc.Id, 0, 2)
+         Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
       end
    elseif bAdj20 then
       if dAng20 < 0 then
          EgtSurfTmSwapFacets( Proc.Id, 1, 2)
+         Proc.Face = BL.GetFacetsInfo( Proc, b3Raw)
       end
    end
    -- dati delle facce

LuaLibs/ProcessStepJointNotch.lua

@@ -11,6 +11,7 @@ local BL = require( 'BeamLib')
 local Fbs = require( 'FacesBySaw')
 local DC = require( 'DiceCut')
 local Cut = require( 'ProcessCut')
+local Topology = require( 'FeatureTopology')
 
 EgtOutLog( ' ProcessStepJointNotch started', 1)
 
@@ -384,6 +385,8 @@ local function MakeFourFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, nDiffWidt
       EgtSetName( AddId, 'AddCut_' .. tostring( Proc.Id))
       -- applico lavorazione
       local NewProc = { Id = AddId, Grp = Proc.Grp, Prc = Proc.Prc, Box = Proc.Box, Fct = Proc.Fct, Flg = Proc.Flg}
+      local b3Raw = EgtGetRawPartBBox( nRawId)
+      Topology.Classify( NewProc, b3Raw)
       local bOk, sErr = MakeTwoFaces( NewProc, nPhase, nRawId, nPartId, dOvmHead, nDiffWidth)
       if not bOk then return bOk, sErr end
    end

UpdateLog.txt

@@ -1,5 +1,12 @@
            ==== Beam Update Log ====
 
+Versione 2.6e5 (27/05/2024)
+- Modif : in LapJoint corretto typo in lavorazione lamello che impediva il funzionamento corretto.
+
+Versione 2.6e4 (20/05/2024)
+- Modif : in SawPlusChain le lavorazioni di sega a catena aggiuntive (side) si fermano in mezzeria se tasca passante
+- Modif : in SawPlusChain il tunnel con sega a catena viene fatto da un solo lato se possibile
+
 Versione 2.6e3 (14/05/2024)
 - Modif : in SawPlusChain aggiunta gestione lavorazioni aggiuntive lati aperti e tunnel
 - Fixed : in Cut -> MakeFromTop ricalcolo direzione di lavorazione su facce a cubetti.

Version.lua

@@ -2,5 +2,5 @@
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '2.6e3'
+VERSION = '2.6e5'
 MIN_EXE = '2.6e2'