- in HeadCut, Split modifiche ai tagli aggiuntivi orizzontali e verticali; disattivati attacchi tangenziali per tagli aggiuntivi verticali in PF1250 per evitare rischi di collisione con testa sotto che cambia utensile in tempo mascherato

LuaLibs/FacesBySaw.lua

@@ -426,14 +426,14 @@ function FacesBySaw.MakeOne( nSurfId, nFacet, sCutting, dSawDiam, Par5, dVzLimDw
    local bLioTang
    local Ktp = 1.1
    if BD.KIOTP then Ktp = BD.KIOTP end
-   if ( not bDownUp or abs( vtTg:getY()) > 0.5) and
+   if ( bForceTangentLeadInOut or ( not bDownUp or abs( vtTg:getY()) > 0.5) and
       ( not bDownHead or abs( vtTg:getZ()) < 0.51) and
       abs( vtTg:getX()) < 0.9848 and
       ( ( abs( vtTg:getZ()) < 0.17 and ( vtV1:getZ() < -0.5 or vtV2:getZ() < -0.5) and not bDownHead) or
         ( abs( vtTg:getZ()) < 0.51 and b3Box:getDimZ() > 300 and BD.C_SIMM and BD.MAX_HEIGHT > 450 and b3Box:getDimX() > BD.LEN_SHORT_PART) or 
         ( abs( vtTg:getZ()) < 0.51 and ( dLenLi2 + dLenLo2) < ( dLenLi + dLenLo)) or
         Ktp * ( dLenLi2 + dLenLo2) < ( dLenLi + dLenLo) or
-        ( BD.TURN == 2 and vtRef:getZ() < -0.1)) then
+        ( BD.TURN == 2 and vtRef:getZ() < -0.1))) then
       if BD.TURN == 2 then
          if vtTg:getY() < -0.1 then 
             bLioTang = 1

LuaLibs/ProcessCut.lua

@@ -254,7 +254,7 @@ end
 
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione con testa da sopra
-local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, nLimitingSurf)
+local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, nLimitingSurf, bForceTangentLeadInOut)
    -- ingombro del grezzo
    b3Raw = b3Raw or EgtGetRawPartBBox( nRawId)
    -- ingombro del pezzo
@@ -581,7 +581,8 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
                   if ( i % 2 == 0) and ( Proc.Fct == 1) and bNoPerpCuts then
                      vtOrthoOAlternative = - vtOrthoO
                   end
-                  local bOk, sErr = Fbs.MakeOne( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, dVzLimDwnUp, dExtraCut, BD.CUT_SIC, 0, 0, 0, sNotes, b3Raw, nil, nil, bSpecialTangentLeadInOut, nil, vtOrthoOAlternative)
+                  bForceTangentLeadInOut = bForceTangentLeadInOut and ( ( i % 2) ~= 0)
+                  local bOk, sErr = Fbs.MakeOne( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, dVzLimDwnUp, dExtraCut, BD.CUT_SIC, 0, 0, 0, sNotes, b3Raw, nil, nil, bSpecialTangentLeadInOut, bForceTangentLeadInOut, vtOrthoOAlternative)
                   if not bOk then return bOk, sErr end
                end
             end
@@ -821,7 +822,7 @@ end
 
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione
-function ProcessCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, dOvmTail, bUpdateIng, nLimitingSurf)
+function ProcessCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, dOvmTail, bUpdateIng, nLimitingSurf, bForceTangentLeadInOut)
    -- sovramateriale di coda
    dOvmTail = dOvmTail or BD.OVM_MID
    -- ingombro del grezzo
@@ -860,7 +861,7 @@ function ProcessCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom,
    local bNoDicing = false
    -- se taglio con testa da sopra
    if not bDownHead and not bDownTurn then
-      local bOk, sErr, bNoDicing2 = MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, nLimitingSurf)
+      local bOk, sErr, bNoDicing2 = MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, bFromBottom, bCustDiceCut, bForced, b3Raw, sNotes, nLimitingSurf, bForceTangentLeadInOut)
       bNoDicing = bNoDicing2
       if not bOk then return false, sErr end
    -- altrimenti taglio con testa da sotto

LuaLibs/ProcessHeadCut.lua

@@ -177,7 +177,7 @@ local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw)
    for j = nVerticalCuts, 1, -1 do
       local nFaceUse = MCH_MILL_FU.PARAL_FRONT
       local dVerticalCutOffset = dVerticalSliceHeight * -j
-      local bForceTangentLeadInOut = BD.PRESS_ROLLER
+      local bForceTangentLeadInOut = BD.PRESS_ROLLER and not BD.DOWN_HEAD
       bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1 -dCutXOffset, BD.CUT_SIC, dVerticalCutOffset, 0, 0, '', b3Raw, nil, nil, nil, bForceTangentLeadInOut)
       if not bOk then return bOk, sErr end
    end
@@ -494,7 +494,11 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
                   end
                -- tagli aggiuntivi non necessari
                else
-                  bOk, sErr = Cut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, nil, false, true)
+                  local bForceTangentLeadInOut = false
+                  if BD.PRESS_ROLLER then
+                     bForceTangentLeadInOut = true
+                  end
+                  bOk, sErr = Cut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, nil, false, true, nil, nil, nil, nil, nil, bForceTangentLeadInOut)
                end
                return bOk, sErr
             end

LuaLibs/ProcessSplit.lua

@@ -352,7 +352,7 @@ local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw, sNotes)
    for j = nVerticalCuts, 1, -1 do
       local nFaceUse = MCH_MILL_FU.PARAL_FRONT
       local dVerticalCutOffset = dVerticalSliceHeight * -j
-      local bForceTangentLeadInOut = BD.PRESS_ROLLER
+      local bForceTangentLeadInOut = BD.PRESS_ROLLER and not BD.DOWN_HEAD
       bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1 -dCutXOffset, BD.CUT_SIC, dVerticalCutOffset, 0, 0, sNotes, b3Raw, nil, nil, nil, bForceTangentLeadInOut)
       if not bOk then return bOk, sErr end
    end
@@ -766,7 +766,11 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
                   end
                -- tagli aggiuntivi non necessari
                else
-                  bOk, sErr = Cut.Make( Proc, nNewPhase, nRawId, nPartId, dMaxElev, nil, false, true, b3Raw, sNotes, dCurrOvmT)
+                  local bForceTangentLeadInOut = false
+                  if BD.PRESS_ROLLER then
+                     bForceTangentLeadInOut = true
+                  end
+                  bOk, sErr = Cut.Make( Proc, nNewPhase, nRawId, nPartId, dMaxElev, nil, false, true, b3Raw, sNotes, dCurrOvmT, nil, nil, bForceTangentLeadInOut)
                end
                if sNotesFinal then
                   EgtSetMachiningParam( MCH_MP.USERNOTES, sNotesFinal)