Egalware/DataBeam
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

In HeadCut e Split, si aggiungono tagli extra orizzontali solo se il materiale da tagliare è meno di un cubetto. Altrimenti ci sarebbe collisione.

Browse Source
This commit is contained in:
andrea.villa
2025-04-02 11:01:04 +02:00
parent 445a76f543
commit 13f0545ebe
2 changed files with 10 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
LuaLibs/ProcessHeadCut.lua
+6 -4
View File
@@ -406,6 +406,9 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
dSawThick2 = EgtTdbGetCurrToolParam( MCH_TP.THICK) or dSawThick2
end
end
-- determino se lo spessore del materiale da rimuovere è eccessivo e quindi vanno fatti più tagli con offset
local nCuts = max( ceil( dOvmHead / (( BD.MAX_LEN_SCRAP_START or BD.MAX_LEN_SCRAP) + 0.5)), 1)
local dOffsL = dOvmHead / nCuts
-- caratteristiche taglio
local dDimYRef = EgtIf( b3Raw:getDimZ() < BD.MIN_DIM_HBEAM + 10 * GEO.EPS_SMALL, dMaxDepth, abs( BD.MAX_DIM_HTCUT_HBEAM))
local bBigSectionCut = ( b3Raw:getDimY() > 2 * dDimYRef - BD.CUT_EXTRA_MIN + 10 * GEO.EPS_SMALL) and
@@ -417,7 +420,9 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
-- verifico necessità di tagli aggiuntivi orizzontali o verticali
local dMinOvmHeadForAddeddCuts = 10.123
local bNeedVerticalAddedCuts = ( Proc.Face[1].WidthTrimmed > BD.MAX_LEN_DICE) and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL)
local bNeedHorizontalAddedCuts = ( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE)) and not bBigSectionCut and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL)
local bNeedHorizontalAddedCuts = ( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE)) and
not bBigSectionCut and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL) and
dOffsL < BD.MAX_DIM_DICE
-- dati lavorazioni sopra e sotto
local Cutting1Data = { sCutting = sCutting, dSawDiam = dSawDiam, dMaxDepth = dMaxDepth, dSawThick = dSawThick, dMaxVertDepth = dMaxVertDepth}
local Cutting2Data = { sCutting = sCutting2, dSawDiam = dSawDiam2, dMaxDepth = dMaxDepth2, dSawThick = dSawThick2}
@@ -429,9 +434,6 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
if not bNeedHCut and AreSameVectorApprox( vtN, X_AX()) and abs( ptC:getX() - b3Raw:getMax():getX()) < 10 * GEO.EPS_SMALL then
return true
end
-- determino se lo spessore del materiale da rimuovere è eccessivo e quindi vanno fatti più tagli con offset
local nCuts = max( ceil( dOvmHead / (( BD.MAX_LEN_SCRAP_START or BD.MAX_LEN_SCRAP) + 0.5)), 1)
local dOffsL = dOvmHead / nCuts
-- se taglio per sezioni alte e larghe
if bBigSectionCut then
if dOvmHead > 0 then
LuaLibs/ProcessSplit.lua
+4 -1
View File
@@ -661,7 +661,10 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId, nOrd, sDownOrSideOrSt
-- determino la necessità di tagli aggiuntivi
local dMinTailScrapForAdditionalCuts = 10.123
local bNeedVerticalAddedCuts = not bSplit and ( Proc.Face[1].WidthTrimmed > BD.MAX_LEN_DICE) and ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL)
local bNeedHorizontalAddedCuts = not bSplit and ( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE)) and not bBigSectionCut and ( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL)
local bNeedHorizontalAddedCuts = not bSplit and not bBigSectionCut and
( Proc.Face[1].HeightTrimmed > ( BD.MIN_HEIGHT_ADDED_CUTS or BD.MAX_LEN_DICE)) and
( dLenEndRaw > dMinTailScrapForAdditionalCuts - 10 * GEO.EPS_SMALL) and
dOffsL < BD.MAX_DIM_DICE
-- dati lavorazioni sopra e sotto
local Cutting1Data = { sCutting = sCutting, dSawDiam = dSawDiam, dMaxDepth = dSawMaxDepth, dSawThick = dSawThick, dMaxVertDepth = dMaxVertDepth}
local Cutting2Data = { sCutting = sCutting2, dSawDiam = dSawDiam2, dMaxDepth = dSawMaxDepth2, dSawThick = dSawThick2}