Egalware/DataBeam
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Tolti parametri non utilizzati passati alla funzione

Browse Source 
Aggiunta lavorazione tramite funzione EGT
This commit is contained in:
andrea.villa
2025-11-24 17:13:20 +01:00
parent eec524a00f
commit 0f122feaac
1 changed files with 11 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files
LuaLibs/ProcessLapJoint.lua
+11 -12
View File
@@ -5973,8 +5973,8 @@ end
---------------------------------------------------------------------
local function AddMillCornerMachining( nPartId, nNewProc, nFacInd, tFacAdj, nAddGrpId,
dToolDiam, dThick, sMilling, dOffsAng, dDepthMach,
bThruThick, dThSurf, dDiam1, dDiam2, dTall1,
dToolDiam, sMilling, dOffsAng, dDepthMach,
dDiam1, dDiam2, dTall1,
dTall2, dDiam3, dTall3, bMakeLocSurf, vFace)
-- variabili costruzione geometria
@@ -6150,7 +6150,7 @@ local function AddMillCornerMachining( nPartId, nNewProc, nFacInd, tFacAdj, nAdd
end
-- inserisco la lavorazione
local sName = 'Clean_' .. ( EgtGetName( nNewProc.Id) or tostring( nNewProc.Id))
local nMchId = WM.AddMachining( nNewProc.Id, sName, sMilling)
local nMchId = EgtAddMachining( sName, sMilling)
if not nMchId then
local sErr = 'Error adding machining ' .. sName .. '-' .. sMilling
EgtOutLog( sErr)
@@ -6196,8 +6196,7 @@ local function AddMillCornerMachining( nPartId, nNewProc, nFacInd, tFacAdj, nAdd
end
---------------------------------------------------------------------
local function AddMillCorner( vFace, Proc, dToolDiam, nAddGrpId, dThick, nMasterNewProc, dDepthMach, bThruThick)
local function AddMillCorner( vFace, Proc, dToolDiam, nAddGrpId, nMasterNewProc, dDepthMach)
local sMilling, dMaxDepth
-- se ripresa angolo con fresa cono 60° con ripresa
@@ -6296,21 +6295,21 @@ local function AddMillCorner( vFace, Proc, dToolDiam, nAddGrpId, dThick, nMaster
local dAngOffs = (dAng + 90) / 2
-- primo taglio
local bOk, sErr = AddMillCornerMachining( Proc.PartId, nNewProc, nFacInd, tFacAdj, nAddGrpId,
dToolDiam, dThick, sMilling, -dAngOffs, dDepthMach,
bThruThick, dMillDiam, dMillTotDiam, abs( dThickTool),
dToolDiam, sMilling, -dAngOffs, dDepthMach,
dMillDiam, dMillTotDiam, abs( dThickTool),
dMaxDepth, dMillDiamTh, dToolLength, bMakeLocSurf, vFace)
if not bOk then return bOk, sErr end
-- secondo taglio
bOk, sErr = AddMillCornerMachining( Proc.PartId, nNewProc, nFacInd, tFacAdj, nAddGrpId,
dToolDiam, dThick, sMilling, dAngOffs, dDepthMach,
bThruThick, dMillDiam, dMillTotDiam, abs( dThickTool),
dToolDiam, sMilling, dAngOffs, dDepthMach,
dMillDiam, dMillTotDiam, abs( dThickTool),
dMaxDepth, dMillDiamTh, dToolLength, bMakeLocSurf, vFace)
if not bOk then return bOk, sErr end
-- altrimenti ho un solo percorso
else
local bOk, sErr = AddMillCornerMachining( Proc.PartId, nNewProc, nFacInd, tFacAdj, nAddGrpId,
dToolDiam, dThick, sMilling, 0, dDepthMach,
bThruThick, dMillDiam, dMillTotDiam, abs( dThickTool),
dToolDiam, sMilling, 0, dDepthMach,
dMillDiam, dMillTotDiam, abs( dThickTool),
dMaxDepth, dMillDiamTh, dToolLength, bMakeLocSurf, vFace)
if not bOk then return bOk, sErr end
end
@@ -7714,7 +7713,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
sWarn = 'Warning : elevation bigger than max tool depth'
EgtOutLog( sWarn)
end
local bCleanCornerOk, sCleanCornerWarn = AddMillCorner( vFace, Proc, dToolDiameter, nAddGrpId, dDiam, nNewProc, dDepth)
local bCleanCornerOk, sCleanCornerWarn = AddMillCorner( vFace, Proc, dToolDiameter, nAddGrpId, nNewProc, dDepth)
if not bCleanCornerOk then return false, sCleanCornerWarn end
if sCleanCornerWarn then
if not sWarn then sWarn = '' end