Merge remote-tracking branch 'origin/develop'

- Aumentata distanza ingombro da 650mm a 660mm.

Common_FAST.NUM.mlpe

@@ -627,7 +627,7 @@ function OnRapid()
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.PREVHEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
                                        ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
@@ -649,7 +649,7 @@ function OnRapid()
       local sES = ' ES'..EgtNumToString( EMT.S, 0)
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
-      if EMT.HEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.HEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sEEPreMove = ' EE' .. EgtIf( bZmax, '3', '4')
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        EmtGetAxis( 'R2') .. EmtGetAxis( 'R1') .. sEE .. sEL .. sER .. sET .. sES

Common_FAST.NUM_PLUS.mlpe

@@ -668,7 +668,7 @@ function OnRapid()
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.PREVHEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
                                        ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
@@ -713,7 +713,7 @@ function OnRapid()
       local sES = ' ES'..EgtNumToString( EMT.S, 0)
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
-      if EMT.HEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.HEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sEEPreMove = ' EE' .. EgtIf( bZmax, '3', '4')
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        EmtGetAxis( 'R2') .. EmtGetAxis( 'R1') .. sEE .. sEL .. sER .. sET .. sES

Common_FAST.TPA.mlpe

@@ -647,7 +647,7 @@ function OnRapid()
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.PREVHEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( MyZHome, 3) ..
                                  ' P4=' .. EgtNumToString( EMT.R2pp, 3) .. ' P5=' .. EgtNumToString( EMT.R1pp, 3) .. 
                                  ' P6=' .. EgtNumToString( EMT.PREVTCPOS, 3) .. ' P7=' .. EgtNumToString( EMT.PREVS, 0) ..
@@ -663,7 +663,7 @@ function OnRapid()
       end
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
-      if EMT.HEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if ( EMT.HEAD == 'H3' or EMT.TTOTLEN > 200) and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( MyZHome, 3) ..
                                  ' P4=' .. EgtNumToString( EMT.R2, 3) .. ' P5=' .. EgtNumToString( EMT.R1, 3) .. 
                                  ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..

Common_FAST.mlpe

@@ -752,7 +752,7 @@ function OnSimulMoveStart()
       -- con pezzi alti aggiorno gli assi rotanti prima di muovermi sopra il pezzo
       if not EMT.LOAD and EMT.MOVE == 0 and EMT.HB > BeamHeightForFixRot and EMT.FLAG2 == 1 then
          -- se motosega mi muovo a X di sicurezza per ruotare
-         if EMT.HEAD == 'H3'then
+         if EMT.HEAD == 'H3' or EMT.TOTLEN > 200 then
             SimulMoveAxes( 'X', SafeXRotAxes, MCH_SIM_STEP.RAPID, 'C', EMT.R1, MCH_SIM_STEP.COLLROT, 'B', EMT.R2, MCH_SIM_STEP.COLLROT)
          end
       end

Common_FAST.mlse

@@ -917,7 +917,7 @@ function SpecCalcEncumbrance( vtTool, vtArm, ptMin, ptMax, bSaw, bChain, dTLen,
          elseif vtTool:getX() > -0.8667 then
             dHeadBack = 450
          else
-            dHeadBack = 650
+            dHeadBack = 660
          end
       else
          dHeadBack = 50 + 0.5 * dTDiam * sqrt( 1 - vtTool:getX() * vtTool:getX())
@@ -1008,7 +1008,7 @@ function SpecCalcEncumbrance( vtTool, vtArm, ptMin, ptMax, bSaw, bChain, dTLen,
          elseif vtTool:getX() < 0.8667 then
             dHeadFront = 450
          else
-            dHeadFront = 650
+            dHeadFront = 660
          end
       else
          dHeadFront = 50 + 0.5 * dTDiam * sqrt( 1 - vtTool:getX() * vtTool:getX())

UpdateLog.txt

@@ -1,5 +1,9 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.6i2 (16/09/2024)
+- (SIM-GEN) Se utensili più lunghi di 200mm, si ruota in home e poi si approccia il pezzo.  Ticket#2038
+- (SIM-GEN) Aumentata distanza ingombro da 650mm a 660mm. In casi di utensile abbastanza lungo poteva andare in colisione. Ticket#2041
+
 Versione 2.6i1 (02/09/2024)
 - (MLDE-SIM-GEN) Rinominato file da "Common-" a "Common_" per uniformità con i file common delle altre macchine. Serve modifica a MLDE macchina.
 

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.6i1',                 -- versione script
+   VERSION = '2.6i2',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }