3dPrinting :

- corretto errore nel calcolo solidi con spiral vase
- nel calcolo solidi migliorata gestione caso problematico con split ricorsivo della curva guida.

LuaLibs/RunCalcSolids.lua

@@ -92,12 +92,12 @@ local function CreateSpiralVaseCap( nSectId, vtDir, nSolidGrp)
    local nSurf3 = EgtSurfTmRuled( nSolidGrp, vCrvs[3], vCrvs[4], GDB_RUL.ISOPAR, s_dTol)
    local nSurf4 = EgtSurfTmByRegion( nSolidGrp, vCrvs[5], s_dTol)
    local nSurf5 = EgtSurfTmByRegion( nSolidGrp, vCrvs[6], s_dTol)
-   local nCapSrf = EgtSurfTmBySewing( nSolidGrp, {nSurf1, nSurf2, nSurf3, nSurf4, nSurf5})
-
+   local nCapSrf = EgtSurfTmByTriangles( nSolidGrp, {nSurf1, nSurf2, nSurf3, nSurf4, nSurf5})
+   
    for i = 1, #vCrvs do
       EgtErase( vCrvs[i])
    end
-
+   
    return nCapSrf
 end
 
@@ -111,10 +111,10 @@ local function CreateSpiralVaseSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
    local vtS = EgtSV( nCrvId, GDB_ID.ROOT)
    local ptE = EgtEP( nCrvId, GDB_ID.ROOT)
    local vtE = EgtEV( nCrvId, GDB_ID.ROOT)
+   local dDelta = ( ptE - ptS) * LayerParams.vtSlicing
    -- appiattisco la curva
    local nCrvCopy = EgtCopyGlob( nCrvId, nGrpTmp)
-   local dDelta = ( ptE - ptS) * LayerParams.vtSlicing
-   EgtSpiralizeCurveAlongExtrusion( nCrvCopy, - dDelta)
+   EgtProjectCurveOnPlane( nCrvCopy, ptS, LayerParams.vtSlicing, GDB_RT.GLOB)
    EgtMergeCurvesInCurveCompo( nCrvCopy)
    EgtChangeClosedCurveStartPoint( nCrvCopy, ptS, GDB_RT.GLOB)
   
@@ -156,10 +156,7 @@ local function CreateSpiralVaseSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
       end
    end
 
-   local nSrfId = EgtSurfTmBySewing( nSolidGrp, vSurfs)
-   if not nSrfId then
-     nSrfId = EgtSurfTmByTriangles( nSolidGrp, vSurfs)
-   end
+   local nSrfId = EgtSurfTmByTriangles( nSolidGrp, vSurfs)
   
    -- creazione del mezzo disco iniziale
    local nCap1 = CreateSpiralVaseCap( nSectId, - vtS, nSolidGrp)
@@ -170,7 +167,7 @@ local function CreateSpiralVaseSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
    -- cancello le curve usate per la costruzione
    EgtErase( nGrpTmp)
 
-   return EgtSurfTmBySewing( nSolidGrp, { nSrfId, nCap1, nCap2}) or EgtSurfTmByTriangles( nSolidGrp, { nSrfId, nCap1, nCap2})
+   return EgtSurfTmByTriangles( nSolidGrp, { nSrfId, nCap1, nCap2})
 end
 
 ----------------------------------------------------------------------
@@ -220,6 +217,36 @@ local function CreateDirectionArrow( nCrvId, nSolidGrp, vtSlicing, dStrand, nLay
    
 end
 
+---------------------------------------------------------------------
+local function CreateRecursiveSolid( nCrvId, vSurfs, nSolidGrp, LayerParams, dStrand)
+
+   -- tento la creazione del solido
+   local nSurf = CreateSolid( nCrvId, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
+   if nSurf then
+      EgtErase( nCrvId)
+      table.insert( vSurfs, nSurf)
+      return true
+   else
+      -- se curva singola esco perchè non è possibile spezzare ulteriormente
+      local _, dParE = EgtCurveDomain( nCrvId)
+      if abs( dParE - 1) < GEO.EPS_SMALL then
+         EgtErase( nCrvId)
+         return false
+      end
+      -- se non si tratta di curva singola, spezzo a metà e tento sulle due sottocurve
+      local dParSplit = floor( dParE / 2 + 0.5)
+      local nCrvSplit = EgtSplitCurveAtParam( nCrvId, dParSplit)
+      if not nCrvSplit then
+         -- errore nello split
+         EgtErase( nCrvId)
+         return false
+      end
+      local bOk = CreateRecursiveSolid( nCrvId, vSurfs, nSolidGrp, LayerParams, dStrand)
+      bOk = bOk and CreateRecursiveSolid( nCrvSplit, vSurfs, nSolidGrp, LayerParams, dStrand)
+      return bOk
+   end
+end
+
 ---------------------------------------------------------------------
 local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
   
@@ -293,30 +320,21 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
             end
          end
          
-         -- ritento spezzando la curva
+         -- ritento spezzando la curva in modo ricorsivo fino ad inidividuare delle sottocurve su cui è possibile calcolare il solido
          if not nSrfId then
             EgtOutLog( 'Warning : CreateSolid_2 failed')
             local nGrp = EgtGroup( nSolidGrp, Frame3d( ORIG(), LayerParams.vtSlicing), GDB_RT.GLOB)
             EgtRelocateGlob( nGuideId, nGrp)
             EgtApproxCurve( nGuideId, GDB_CA.LINES, 100 * GEO.EPS_SMALL)
             EgtRelocateGlob( nGuideId, nSolidGrp)
-            local nFirstCrv, nCrvNbr = EgtSplitCurveAtCorners( nGuideId, 30)
-            if nFirstCrv and nCrvNbr > 1 then
-               local nSrfIds = {}
-               for nInd2 = 0, nCrvNbr-1 do
-                  local nSrfId2 = CreateSolid( nFirstCrv + nInd2, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
-                  EgtErase( nFirstCrv + nInd2)
-                  if nSrfId2 then
-                     table.insert( nSrfIds, nSrfId2)
-                  end
-               end
-               if #nSrfIds == nCrvNbr then
-                  nSrfId = EgtSurfTmBySewing( nSolidGrp, nSrfIds)
-               else
-                  EgtOutLog( 'Warning : CreateSolid_3 failed')
-               end
-            else
-               EgtErase( nFirstCrv)
+
+            local vSurfs = {}
+            local bOk = CreateRecursiveSolid( nGuideId, vSurfs, nSolidGrp, LayerParams, dStrand)
+            if #vSurfs > 0 then
+               nSrfId = EgtSurfTmBySewing( nSolidGrp, vSurfs)
+            end
+            if not nSrfId or bOk == false then
+               EgtOutLog( 'Warning : CreateSolid_3 failed')
             end
             EgtErase( nGrp)
          end