-- C:\TechnoEssetre7\EgtData\Essetre-PF1250RL.data

local Offsets = {
   X1_NEG=-3440,
   X1_POS=0,
   PARK_X1=-250,
   Z1_NEG=-1560,
   Z1_POS=-52,
   PARK_Z1=-535,
   PARK_SAWZ1=-150,
   B1_NEG=-127.0,
   B1_NEG1=-119.0,
   B1_POS=127.0,
   B1_POS1=119.0,
   PARK_B1=-90.0,
   PARK_SAWB1=0.0,
   C1_NEG=-275.0,
   C1_POS=275.0,
   PARK_C1=-90.0,
   PARK_SAWC1=-90.0,
   X2_NEG=-2955,
   X2_POS=0,
   PARK_X2=-70,
   PIVOT_T1=170,
   Z2_NEG=-875,
   Z2_POS=0,
   PARK_Z2=0,
   B2_NEG=-127.0,
   B2_NEG1=-119.0,
   B2_POS=127.0,
   B2_POS1=119.0,
   PARK_B2=-90.0,
   C2_NEG=-275.0,
   C2_POS=275.0,
   PARK_C2=-90.0,
   MIN_Y1=351,
   MAX_Y1=5760,
   PARK_Y1=1011,
   MIN_V1=10,
   MAX_V1=670,
   PIVOT_T2=170,
   X1P_NEG=30,
   X1P_POS=1330,
   DIST_FTZERO=2258.5,
   DELTA_CARICZERO=50,
   X2P_NEG=35,
   X2P_POS=1330,
   Z2P_NEG=30,
   Z2P_POS=440,
   X3P_NEG=35,
   X3P_POS=1330,
   Z3P_NEG=30,
   Z3P_POS=440,
   MIN_V2=-670,
   MAX_V2=-10,
   X4P_NEG=30,
   X4P_POS=1330,
   MIN_Y2=-5746,
   MAX_Y2=-351,
   PARK_Y2=-1011,
   MIN_DELTAVY=341,
   DIST_UNLOAD=-2250,
   OFFSETBLAMAT1=0,
   OFFSETCLAMAT1=0,
   OFFSETBLAMAT2=0,
   OFFSETCLAMAT2=0,
   OFFSETXT1=-1172.4,
   OFFSETZT1=-1250.2,
   OFFSETXT2=-2458.8,
   OFFSETZT2=-437.6,
   OFFSETZSOTTOTRAVE=1005,
   Zzz=1
}

local Trave = {
   XMIN=30,
   XMAX=1251,
   ZMIN=30,
   ZMAX=400,
   Zzz=1
}

local User = {
   L010_LENGTH_MIN_DIV=1000,
   L010_LIM=3,
   L012_LENGTH_MIN_DIV=950,
   L012_LIM=0,
   L020_DIAM_HOLE=12,
   L030_AUM_DIM=0,
   L030_LENGTH_MIN_DIV=0,
   L032_LENGTH_MIN_DIV=0,
   L036_LENGTH_MIN_DIV=900,
   L037_TOOL_WIDTH=0,
   L040_ADD_P11=0,
   L040_ADD_P11_PASS=3,
   L040_OFFSET_P1=0,
   L040_TYPEDRILLING=0,
   L050_ADDDEPTH=3,
   L055_ACTIVE_AS=1,
   L055_ADD_P13=0,
   L056_ACTIVE_AS=1,
   L060_PEN_F1=2,
   L060_PEN_F2=2,
   L138_TOLLERANZA=0,
   NESTING_FROM_BTL=0,
   NESTING_MATERIAL=1,
   NESTING_TYPEEXTERNALOP=1,
   OPTIMIZATIONS_ENABLE_SLICES_F5=1,
   OPTIMIZATIONS_ENABLE_SLICES_F6=1,
   OPTIMIZATIONS_LENGTH_MAX_SCRAP_F5=1200,
   OPTIMIZATIONS_LENGTH_SLICES=100,
   OPTIMIZATIONS_RECOVERY_PRINT_ONLY=0,
   SAFETY_DISTANCE_ZSAVE=30,
   T010_ALTCATENA=361,
   T010_OFFSETPIANOCATENA=20,
   T055_ACTIVE_AS=1,
   Zzz=1
}

local Machine = { Offsets=Offsets, Trave=Trave, User=User}
return Machine