diff --git a/ApiGit/CheckGitlabCommits.ps1 b/ApiGit/Mirrors/CheckGitlabCommits.ps1
similarity index 100%
rename from ApiGit/CheckGitlabCommits.ps1
rename to ApiGit/Mirrors/CheckGitlabCommits.ps1
diff --git a/ApiGit/CheckGitlabMirroring.ps1 b/ApiGit/Mirrors/CheckGitlabMirroring.ps1
similarity index 100%
rename from ApiGit/CheckGitlabMirroring.ps1
rename to ApiGit/Mirrors/CheckGitlabMirroring.ps1
diff --git a/ApiGit/GitlabCreateMissingMirrors.ps1 b/ApiGit/Mirrors/GitlabCreateMissingMirrors.ps1
similarity index 99%
rename from ApiGit/GitlabCreateMissingMirrors.ps1
rename to ApiGit/Mirrors/GitlabCreateMissingMirrors.ps1
index e978c69..294e3a1 100644
--- a/ApiGit/GitlabCreateMissingMirrors.ps1
+++ b/ApiGit/Mirrors/GitlabCreateMissingMirrors.ps1
@@ -15,7 +15,7 @@ $mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
 #contatore ciclo do while
 $projectCount = 170
 #numero massimo di progetti da analizzare
-$projectNumber = 200
+$projectNumber = 250
 #nome file di log
 $logFile = "GiteaNewMirrors.log"
 
diff --git a/ApiGit/GitlabMirroringToGitea.ps1 b/ApiGit/Mirrors/GitlabMirroringToGitea.ps1
similarity index 99%
rename from ApiGit/GitlabMirroringToGitea.ps1
rename to ApiGit/Mirrors/GitlabMirroringToGitea.ps1
index aa45176..1e9acd2 100644
--- a/ApiGit/GitlabMirroringToGitea.ps1
+++ b/ApiGit/Mirrors/GitlabMirroringToGitea.ps1
@@ -12,9 +12,9 @@ $startTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
 # avvio stopwatch
 $mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
 #contatore ciclo do while
-$projectCount = 1
+$projectCount = 170
 #numero massimo di progetti
-$projectNumber = 1
+$projectNumber = 250
 #inizializzo variabili vuote
 $mirrorId = ""
 $mirrorUrl = ""
diff --git a/ApiGit/GitlabRenewTokensMirrors.ps1 b/ApiGit/Mirrors/GitlabRenewTokensMirrors.ps1
similarity index 100%
rename from ApiGit/GitlabRenewTokensMirrors.ps1
rename to ApiGit/Mirrors/GitlabRenewTokensMirrors.ps1
diff --git a/ApiGit/Pipelines/CheckGitlabAzzanoPipelines.ps1 b/ApiGit/Pipelines/CheckGitlabAzzanoPipelines.ps1
new file mode 100644
index 0000000..efb89d6
--- /dev/null
+++ b/ApiGit/Pipelines/CheckGitlabAzzanoPipelines.ps1
@@ -0,0 +1,118 @@
+###Gitlab_Azzano: controllo lo stato delle pipeline dei singoli progetti###
+
+#importo file contenente configurazioni
+. .\ApiGit\ApiGitResources\ApiScriptsConfig.ps1
+#importo file contenente funzioni 
+. .\ApiGit\ApiGitResources\ApiScriptsFunctions.ps1
+
+#rilevo time per log inizio analisi
+$startTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
+# avvio stopwatch
+$mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
+#contatore ciclo do while
+$projectCount = 1
+#numero massimo di progetti da analizzare
+$projectNumber = 200
+#conteggio progetti trovati
+$projectsWithPipeline = 0
+#conteggio pipeline in errore
+$pipelineErrorsCount = 0
+#conteggio pipeline riusciti
+$pipelineSuccessCount = 0
+#nome file di log
+$logFile = "Gitlab-AzzanoPipeline.log"
+
+#creazione folder di Log se non già esistente
+if (Test-Path $logFolder) {
+}
+else {
+    New-Item $logFolder -ItemType Directory
+}
+
+#scrivo intestazione e inizio analisi
+WriteLogOutput $logFile 0 "--------------------"
+Switch ($logLevel) {
+    0 { WriteLogOutput $logFile 0 "LOG SINTETICO GITLAB AZZANO PIPELINE" }
+    1 { WriteLogOutput $logFile 0 "LOG ERRORI GITLAB AZZANO PIPELINE" }
+    2 { WriteLogOutput $logFile 0 "LOG FULL GITLAB AZZANO PIPELINE" }
+    3 { WriteLogOutput $logFile 0 "LOG AMPOLLOSO GITLAB AZZANO PIPELINE" }
+}
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Percorso log: $logFolder"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Inizio Esecuzione Script: $startTime"
+
+#ciclo principale do/while che cicla da 1 a N projectNumber
+do {
+    $callUrl = "https://gitlab-azzano.steamware.net/api/v4/projects/" + $projectCount + "/pipelines/latest"
+    try {
+        $Response = Invoke-WebRequest -URI $callUrl -Headers $azzanoHead -ContentType "application/json" -UseBasicParsing
+        $parsedResponse = $Response.Content | ConvertFrom-Json
+        #scrivo il numero del progetto nel terminale e su file
+        WriteLogOutput $logFile 1 ""
+        WriteLogOutput $logFile 1 "--------------------"
+        WriteLogOutput $logFile 1 "**PROGETTO $projectCount**"
+        foreach ($item in $parsedResponse) {
+            #verifico se i pipeline trovati per il progetto corrente hanno status "success"
+            if ($item.status.Equals("success")) {
+                WriteLogOutput $logFile 2 "Pipeline: $($item.web_url) - Status: $($item.status)"
+                $pipelineSuccessCount = $pipelineSuccessCount + 1
+            }
+            #i pipeline che non hanno status "success" vengono loggati con relativo errore
+            else {
+                WriteLogOutput $logFile 1 "Pipeline: $($item.web_url) - Status: $($item.status)"
+                $pipelineErrorsCount = $pipelineErrorsCount + 1
+            }
+        }
+        $projectsWithPipeline = $projectsWithPipeline + 1
+    }
+    #scrivo se trovo un errore durante il try/catch
+    catch {
+        $parsedError = $_ | ConvertFrom-Json
+        WriteLogOutput $logFile 3 ""
+        WriteLogOutput $logFile 3 "--------------------"
+        WriteLogOutput $logFile 3 "**ERRORE NEL PROGETTO $projectCount**"
+        WriteLogOutput $logFile 3 $($parsedError.message)
+    }
+    $projectCount = $projectCount + 1
+}
+#fine ciclo principale
+while ($projectCount -le $projectNumber)
+
+#somma di pipelineSuccess e pipelineErrors
+$pipelineCount = $pipelineSuccessCount + $pipelineErrorsCount
+
+#percentuale di pipelineSuccess sul totale
+$pipelineSuccessPercentage = [math]::Round(($pipelineSuccessCount / $pipelineCount) * 100, 1)
+
+#percentuale di pipelineErrors sul totale
+$pipelineErrorsPercentage = [math]::Round(($pipelineErrorsCount / $pipelineCount) * 100, 1)
+
+# fermo stopwatch e calcolo durata script
+$mainStopWatch.Stop()
+$durataScript = $mainStopWatch.Elapsed.TotalSeconds
+
+#rilevo time per log fine analisi
+$endTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
+
+#invio a zabbix le metriche rilevate tramite zabbix_sender.exe
+#WriteLogOutput $logFile 0 ""
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ProjectsWithPipeline -o $projectsWithPipeline
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.TotalPipeline -o $pipelineCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.SuccessPipeline -o $pipelineSuccessCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ErrorsPipeline -o $pipelineErrorsCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.SuccessPipelinePercent -o $pipelineSuccessPercentage
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ErrorsPipelinePercent -o $pipelineErrorsPercentage
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.CheckPipelineDuration -o $durataScript
+
+#scrivo a video le statistiche
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "PROGETTI CON PIPELINE ATTIVE: $projectsWithPipeline"
+WriteLogOutput $logFile 0 "PIPELINE TROVATE: $pipelineCount"
+WriteLogOutput $logFile 0 "PIPELINE RIUSCITE: $pipelineSuccessCount ($pipelineSuccessPercentage%)"
+WriteLogOutput $logFile 0 "PIPELINE FALLITE: $pipelineErrorsCount ($pipelineErrorsPercentage%)"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Fine Esecuzione Script: $endTime"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Durata Esecuzione Script: $durataScript secondi"
+WriteLogOutput $logFile 0 ""
\ No newline at end of file
diff --git a/ApiGit/Pipelines/CheckGitlabNembroPipelines.ps1 b/ApiGit/Pipelines/CheckGitlabNembroPipelines.ps1
new file mode 100644
index 0000000..709c183
--- /dev/null
+++ b/ApiGit/Pipelines/CheckGitlabNembroPipelines.ps1
@@ -0,0 +1,118 @@
+###Gitlab-Nembro: controllo lo stato delle pipeline dei singoli progetti###
+
+#importo file contenente configurazioni
+. .\ApiGit\ApiGitResources\ApiScriptsConfig.ps1
+#importo file contenente funzioni 
+. .\ApiGit\ApiGitResources\ApiScriptsFunctions.ps1
+
+#rilevo time per log inizio analisi
+$startTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
+# avvio stopwatch
+$mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
+#contatore ciclo do while
+$projectCount = 1
+#numero massimo di progetti da analizzare
+$projectNumber = 200
+#conteggio progetti trovati
+$projectsWithPipeline = 0
+#conteggio pipeline in errore
+$pipelineErrorsCount = 0
+#conteggio pipeline riusciti
+$pipelineSuccessCount = 0
+#nome file di log
+$logFile = "Gitlab-NembroPipeline.log"
+
+#creazione folder di Log se non già esistente
+if (Test-Path $logFolder) {
+}
+else {
+    New-Item $logFolder -ItemType Directory
+}
+
+#scrivo intestazione e inizio analisi
+WriteLogOutput $logFile 0 "--------------------"
+Switch ($logLevel) {
+    0 { WriteLogOutput $logFile 0 "LOG SINTETICO GITLAB NEMBRO PIPELINE" }
+    1 { WriteLogOutput $logFile 0 "LOG ERRORI GITLAB NEMBRO PIPELINE" }
+    2 { WriteLogOutput $logFile 0 "LOG FULL GITLAB NEMBRO PIPELINE" }
+    3 { WriteLogOutput $logFile 0 "LOG AMPOLLOSO GITLAB NEMBRO PIPELINE" }
+}
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Percorso log: $logFolder"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Inizio Esecuzione Script: $startTime"
+
+#ciclo principale do/while che cicla da 1 a N projectNumber
+do {
+    $callUrl = "https://gitlab-nembro.steamware.net/api/v4/projects/" + $projectCount + "/pipelines/latest"
+    try {
+        $Response = Invoke-WebRequest -URI $callUrl -Headers $nembroHead -ContentType "application/json" -UseBasicParsing
+        $parsedResponse = $Response.Content | ConvertFrom-Json
+        #scrivo il numero del progetto nel terminale e su file
+        WriteLogOutput $logFile 1 ""
+        WriteLogOutput $logFile 1 "--------------------"
+        WriteLogOutput $logFile 1 "**PROGETTO $projectCount**"
+        foreach ($item in $parsedResponse) {
+            #verifico se i pipeline trovati per il progetto corrente hanno status "success"
+            if ($item.status.Equals("success")) {
+                WriteLogOutput $logFile 2 "Pipeline: $($item.web_url) - Status: $($item.status)"
+                $pipelineSuccessCount = $pipelineSuccessCount + 1
+            }
+            #i pipeline che non hanno status "success" vengono loggati con relativo errore
+            else {
+                WriteLogOutput $logFile 1 "Pipeline: $($item.web_url) - Status: $($item.status)"
+                $pipelineErrorsCount = $pipelineErrorsCount + 1
+            }
+        }
+        $projectsWithPipeline = $projectsWithPipeline + 1
+    }
+    #scrivo se trovo un errore durante il try/catch
+    catch {
+        $parsedError = $_ | ConvertFrom-Json
+        WriteLogOutput $logFile 3 ""
+        WriteLogOutput $logFile 3 "--------------------"
+        WriteLogOutput $logFile 3 "**ERRORE NEL PROGETTO $projectCount**"
+        WriteLogOutput $logFile 3 $($parsedError.message)
+    }
+    $projectCount = $projectCount + 1
+}
+#fine ciclo principale
+while ($projectCount -le $projectNumber)
+
+#somma di pipelineSuccess e pipelineErrors
+$pipelineCount = $pipelineSuccessCount + $pipelineErrorsCount
+
+#percentuale di pipelineSuccess sul totale
+$pipelineSuccessPercentage = [math]::Round(($pipelineSuccessCount / $pipelineCount) * 100, 1)
+
+#percentuale di pipelineErrors sul totale
+$pipelineErrorsPercentage = [math]::Round(($pipelineErrorsCount / $pipelineCount) * 100, 1)
+
+# fermo stopwatch e calcolo durata script
+$mainStopWatch.Stop()
+$durataScript = $mainStopWatch.Elapsed.TotalSeconds
+
+#rilevo time per log fine analisi
+$endTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
+
+#invio a zabbix le metriche rilevate tramite zabbix_sender.exe
+#WriteLogOutput $logFile 0 ""
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ProjectsWithPipeline -o $projectsWithPipeline
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.TotalPipeline -o $pipelineCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.SuccessPipeline -o $pipelineSuccessCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ErrorsPipeline -o $pipelineErrorsCount
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.SuccessPipelinePercent -o $pipelineSuccessPercentage
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.ErrorsPipelinePercent -o $pipelineErrorsPercentage
+#& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ufficio -s "IIS04" -k Gitlab.CheckPipelineDuration -o $durataScript
+
+#scrivo a video le statistiche
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "PROGETTI CON PIPELINE ATTIVE: $projectsWithPipeline"
+WriteLogOutput $logFile 0 "PIPELINE TROVATE: $pipelineCount"
+WriteLogOutput $logFile 0 "PIPELINE RIUSCITE: $pipelineSuccessCount ($pipelineSuccessPercentage%)"
+WriteLogOutput $logFile 0 "PIPELINE FALLITE: $pipelineErrorsCount ($pipelineErrorsPercentage%)"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Fine Esecuzione Script: $endTime"
+WriteLogOutput $logFile 0 ""
+WriteLogOutput $logFile 0 "Durata Esecuzione Script: $durataScript secondi"
+WriteLogOutput $logFile 0 ""
\ No newline at end of file
diff --git a/ApiGit/CheckGitlabPipelines.ps1 b/ApiGit/Pipelines/CheckGitlabPipelines.ps1
similarity index 100%
rename from ApiGit/CheckGitlabPipelines.ps1
rename to ApiGit/Pipelines/CheckGitlabPipelines.ps1
diff --git a/ApiGit/ReposCreationAzzanoNembro.ps1 b/ApiGit/ReposCreation/ReposCreationAzzanoNembro.ps1
similarity index 99%
rename from ApiGit/ReposCreationAzzanoNembro.ps1
rename to ApiGit/ReposCreation/ReposCreationAzzanoNembro.ps1
index 820e37a..be70091 100644
--- a/ApiGit/ReposCreationAzzanoNembro.ps1
+++ b/ApiGit/ReposCreation/ReposCreationAzzanoNembro.ps1
@@ -15,7 +15,7 @@ $mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
 #contatore ciclo do while
 $projectCount = 170
 #numero massimo di progetti da analizzare (messo a 1 per "sicura inserita" siccome questo script è potenzialmente pericoloso)
-$projectNumber = 200
+$projectNumber = 300
 #nome file di log
 $logFile = "AzzanoNembroReposCreation.log"
 
diff --git a/ApiGit/ReposCreationGitea.ps1 b/ApiGit/ReposCreation/ReposCreationGitea.ps1
similarity index 99%
rename from ApiGit/ReposCreationGitea.ps1
rename to ApiGit/ReposCreation/ReposCreationGitea.ps1
index d57772f..749c2ad 100644
--- a/ApiGit/ReposCreationGitea.ps1
+++ b/ApiGit/ReposCreation/ReposCreationGitea.ps1
@@ -14,7 +14,7 @@ $mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
 #contatore ciclo do while
 $projectCount = 170
 #numero massimo di progetti da analizzare
-$projectNumber = 200
+$projectNumber = 300
 #nome file di log
 $logFile = "GiteaReposCreation.log"
 
diff --git a/ApiGit/ReposCreationGogs.ps1 b/ApiGit/ReposCreation/ReposCreationGogs.ps1
similarity index 99%
rename from ApiGit/ReposCreationGogs.ps1
rename to ApiGit/ReposCreation/ReposCreationGogs.ps1
index f905e65..c78528f 100644
--- a/ApiGit/ReposCreationGogs.ps1
+++ b/ApiGit/ReposCreation/ReposCreationGogs.ps1
@@ -14,7 +14,7 @@ $mainStopWatch = [system.diagnostics.stopwatch]::StartNew()
 #contatore ciclo do while
 $projectCount = 170
 #numero massimo di progetti da analizzare
-$projectNumber = 200
+$projectNumber = 300
 #nome file di log
 $logFile = "GogsReposCreation.log"
 
diff --git a/GenericCallUrl/CallUrlExample.ps1 b/GenericCallUrl/CallUrlExample.ps1
new file mode 100644
index 0000000..d9ec177
--- /dev/null
+++ b/GenericCallUrl/CallUrlExample.ps1
@@ -0,0 +1,52 @@
+#######PREDISPOSIZIONE FILE, FOLDER E FUNZIONE DI LOG#######
+
+#definisco cartella file di log
+$logFolder = "c:\EgwLogs\"
+#definisco nome file di log
+$logFile = "ExampleLog1.log"
+
+#verifico se esiste la cartella di log
+if (Test-Path $logFolder) {
+}
+#se non esiste la cartella di log la creo
+else {
+    New-Item $logFolder -ItemType Directory
+}
+
+#rilevo time per log inizio analisi
+$dateTime = (Get-Date).toString("yyyy/MM/dd HH:mm:ss")
+
+#funzione per scrittura output & log
+Function WriteLogOutput {
+    Param ($logFile, [string]$logString)
+    #compongo path per file di log
+    $logPath = Join-Path $logFolder $logFile
+    #aggiungo il contenuto della stringa da loggare
+    Add-content $logPath -value "$logString"
+    #scrivo a terminale il contenuto della stringa da loggare 
+    Write-Output($logString) 
+}
+
+#compongo URL da chiamare con successivo try/catch
+#########   $callUrl = "https://URL/DA/CHIAMARE" + $varieEventuiali + "/EVENTUALE URL/" + $varieEventuali
+    #eseguo call url con try/catch
+    try {
+        #########   $Response = Invoke-WebRequest -URI $callUrl -Headers $EventualeHeader -ContentType "application/json" -UseBasicParsing
+        #converto da Json la risposta in caso di esito positivo del try/catch
+        $parsedResponse = $Response.Content | ConvertFrom-Json
+        #scrivo su log data/ora e risposta convertita dal Json
+        WriteLogOutput $logFile "--------------------"
+        WriteLogOutput $logFile "Date/Time: $dateTime"
+        WriteLogOutput $logFile "Response:"
+        WriteLogOutput $logFile $($parsedResponse.message)
+    }
+    #scrivo se trovo un errore durante il try/catch
+    catch {
+        #converto da Json l'eventuale errore in caso di esito negativo del try/catch
+        $parsedError = $_ | Out-String | ConvertFrom-Json
+        #scrivo su log data/ora e errore convertito dal Json
+        WriteLogOutput $logFile "--------------------"
+        WriteLogOutput $logFile "Date/Time: $dateTime"
+        WriteLogOutput $logFile "Error:"
+        WriteLogOutput $logFile $($parsedError.message)
+    }
\ No newline at end of file
diff --git a/MapUnmapDrive/VeeamOvhMountB.ps1 b/MapUnmapDrive/VeeamOvhMountB.ps1
index e839805..e072e1b 100644
--- a/MapUnmapDrive/VeeamOvhMountB.ps1
+++ b/MapUnmapDrive/VeeamOvhMountB.ps1
@@ -5,7 +5,7 @@ $date = Get-Date
 $filePath = "C:\Steamware\Log\" + $hostname + "_Mount_B.log"
 $intestazione = $hostname + " " + $date
 #diskpath varia in base alla singola macchina veeam
-$diskpath = "\\ovh-hv13\v$\backup\bckhv15.vhdx"
+$diskpath = ###SCRIVERE PATH NECESSARIO
 
 #verifico se esiste file di log, se non esiste lo creo e scrivo intestazione
 if(!(Test-Path -Path $filePath)) {
diff --git a/NugetNexus/UploadNupgkNexus.ps1 b/NugetNexus/UploadNupgkNexus.ps1
new file mode 100644
index 0000000..866898b
--- /dev/null
+++ b/NugetNexus/UploadNupgkNexus.ps1
@@ -0,0 +1,13 @@
+#SCRIPT POWERSHELL PER UPLOAD NUGET.nupkg SU REPOSITORY NEXUS.STEAMWARE.NET
+
+#percorso dell'eseguibile nuget.exe che fa l'upload
+$pathNugetExe = 'C:\Users\marco.locatelli\Documents\Emgu.CV\nuget.exe'
+#chiave API per autenticazione su nexus.steamware.net
+$apiKey = #SI TROVA IN GITLAB, ADMIN, CREDENZIALI SALVATE, NEXUS API
+#indirizzo del repository online su cui uploadare il pacchetto
+$repoUrl = 'http://nexus.steamware.net/repository/nuget-hosted'
+#path del pacchetto nupkg da uploadare
+$nupkgToUpload = 'C:\Users\marco.locatelli\Documents\Emgu.CV\Emgu.runtime.windows.cuda.dnn.cnn.infer.8.8.0.nupkg'
+
+& $pathNugetExe setapikey $apiKey -source $repoUrl
+& $pathNugetExe push $nupkgToUpload -Source $repoUrl
\ No newline at end of file
diff --git a/NugetNexus/nuget.exe b/NugetNexus/nuget.exe
new file mode 100644
index 0000000..3bd8edb
Binary files /dev/null and b/NugetNexus/nuget.exe differ
diff --git a/WServices/RedisCheck.ps1 b/WServices/RedisCheck.ps1
new file mode 100644
index 0000000..f5f7f4b
--- /dev/null
+++ b/WServices/RedisCheck.ps1
@@ -0,0 +1,6 @@
+#Eseguo Get-Service per ottenere informazioni riguardo il servizio desiderato
+$Response = Get-Service "NomeServizio"
+#Se il servizio ha status = stopped faccio qualcosa tipo inviare a zabbix informazioni
+if ($Response.Status -eq "Stopped" ) {
+    #& "C:\Program Files\Zabbix Agent\zabbix_sender.exe" -z zabproxy.ovh -s "WIN2019IIS.OVH" -k RedisSentinel.Failure -o 1
+}
\ No newline at end of file