Imports EgtUILib

Public Class TopCommandBarVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   'Public ReadOnly Property MruFileNames As ObservableCollection(Of String)
   '   Get
   '      Return IniFile.m_MruFiles.m_FileNames
   '   End Get
   'End Property

   Private m_IsEnabled As Boolean
   Public Property IsEnabled As Boolean
      Get
         Return m_IsEnabled
      End Get
      Set(value As Boolean)
         If value <> m_IsEnabled Then
            m_IsEnabled = value
            NotifyPropertyChanged("IsEnabled")
         End If
      End Set
   End Property

   ' Definizione comandi
   Private m_cmdNew As ICommand
   Private m_cmdOpen As ICommand
   'Private Shared m_cmdOpenMruFile As ICommand
   Private m_cmdSave As ICommand
   Private m_cmdSaveAs As ICommand
   Private m_cmdOptions As ICommand
   Private m_cmdSendFeedback As ICommand

#Region "ToolTip"

   'Proprietà ToolTip
   Public ReadOnly Property NewToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 1)
      End Get
   End Property
   Public ReadOnly Property OpenToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 2)
      End Get
   End Property
   Public ReadOnly Property SaveToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 3)
      End Get
   End Property
   Public ReadOnly Property SaveAsToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 4)
      End Get
   End Property
   Public ReadOnly Property InsertToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 5)
      End Get
   End Property
   Public ReadOnly Property ImportToolTip As String
      Get
         ' Return EgtMsg(MSG_TOPCOMMANDBAR + 6)
      End Get
   End Property
   Public ReadOnly Property ExportToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 7)
      End Get
   End Property
   Public ReadOnly Property OptionsToolTip As String
      Get
         ' Return EgtMsg(MSG_TOPCOMMANDBAR + 9)
      End Get
   End Property
   Public ReadOnly Property SendFeedbackToolTip As String
      Get
         'Return EgtMsg(MSG_TOPCOMMANDBAR + 13)
      End Get
   End Property

#End Region ' ToolTip

#End Region    ' Fields & Properties

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in OmagOFFICEMap
      OmagOFFICEMap.SetRefTopCommandBarVM(Me)
   End Sub

#End Region    ' CONSTRUCTOR

#Region "COMMANDS"

#Region "NewCommand"

   ''' <summary>
   ''' Returns a command that do New.
   ''' </summary>
   Public ReadOnly Property NewCommand As ICommand
      Get
         If m_cmdNew Is Nothing Then
            m_cmdNew = New Command(AddressOf NewCmd)
         End If
         Return m_cmdNew
      End Get
   End Property

   ''' <summary>
   ''' Execute the New.  This method is invoked by the NewCommand.
   ''' </summary>
   Friend Sub NewCmd()
      OmagOFFICEMap.refSceneHostV.NewProject()
      OmagOFFICEMap.refMachGroupPanelVM.LoadMachGroups()
   End Sub

#End Region ' NewCommand

#Region "OpenCommand"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property OpenCommand As ICommand
      Get
         If m_cmdOpen Is Nothing Then
            m_cmdOpen = New Command(AddressOf Open)
         End If
         Return m_cmdOpen
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Open()
      OpenProject(String.Empty)
   End Sub

   Friend Sub OpenProject(sFilePath As String)
      OmagOFFICEMap.refSceneHostV.OpenProject(sFilePath)
      OmagOFFICEMap.refMachGroupPanelVM.LoadMachGroups()
   End Sub

#End Region ' OpenCommand

   '#Region "OpenMruFileCommand"

   '   ''' <summary>
   '   ''' Returns a command that do Open.
   '   ''' </summary>
   '   Public ReadOnly Property OpenMruFileCommand As ICommand
   '      Get
   '         If m_cmdOpenMruFile Is Nothing Then
   '            m_cmdOpenMruFile = New RelayCommand(AddressOf OpenMruFile)
   '         End If
   '         Return m_cmdOpenMruFile
   '      End Get
   '   End Property

   '   ''' <summary>
   '   ''' Execute the Open.  This method is invoked by the OpenCommand.
   '   ''' </summary>
   '   Public Sub OpenMruFile(ByVal param As Object)
   '      OpenProject(DirectCast(param, String).Replace("__", "_"))
   '   End Sub

   '#End Region ' OpenMruFileCommand

#Region "SaveCommand"

   ''' <summary>
   ''' Returns a command that do Save.
   ''' </summary>
   Public ReadOnly Property SaveCommand As ICommand
      Get
         If m_cmdSave Is Nothing Then
            m_cmdSave = New Command(AddressOf Save)
         End If
         Return m_cmdSave
      End Get
   End Property

   ''' <summary>
   ''' Execute the Save.  This method is invoked by the SaveCommand.
   ''' </summary>
   Public Sub Save(ByVal param As Object)
      OmagOFFICEMap.refSceneHostV.SaveProject()
   End Sub

#End Region ' SaveCommand

#Region "SaveAsCommand"

      ''' <summary>
      ''' Returns a command that do SaveAs.
      ''' </summary>
      Public ReadOnly Property SaveAsCommand As ICommand
         Get
            If m_cmdSaveAs Is Nothing Then
               m_cmdSaveAs = New Command(AddressOf SaveAs)
            End If
            Return m_cmdSaveAs
         End Get
      End Property

      ''' <summary>
      ''' Execute the SaveAs.  This method is invoked by the SaveAsCommand.
      ''' </summary>
      Public Sub SaveAs(ByVal param As Object)
         OmagOFFICEMap.refSceneHostV.SaveAsProject()
      End Sub

#End Region ' SaveAsCommand

#Region "OptionsCommand"

   ''' <summary>
   ''' Returns a command that do Export.
   ''' </summary>
   Public ReadOnly Property OptionsCommand As ICommand
      Get
         If m_cmdOptions Is Nothing Then
            m_cmdOptions = New Command(AddressOf Options)
         End If
         Return m_cmdOptions
      End Get
   End Property

   ''' <summary>
   ''' Execute the Export.  This method is invoked by the ExportCommand.
   ''' </summary>
   Public Sub Options(ByVal param As Object)
      Dim OptionsWindow As New OptionWindowV
      'OptionsWindow.Height = 614
      'OptionsWindow.Width = 1024
      OptionsWindow.DataContext = New OptionWindowVM
      OptionsWindow.Owner = Application.Current.MainWindow
      OptionsWindow.ShowDialog()
   End Sub

#End Region ' OptionsCommand

   '#Region "SendFeedbackCommand"

   '   ''' <summary>
   '   ''' Returns a command that do SendFeedback.
   '   ''' </summary>
   '   Public ReadOnly Property SendFeedbackCommand As ICommand
   '      Get
   '         If m_cmdSendFeedback Is Nothing Then
   '            m_cmdSendFeedback = New RelayCommand(AddressOf SendFeedback)
   '         End If
   '         Return m_cmdSendFeedback
   '      End Get
   '   End Property

   '   ''' <summary>
   '   ''' Execute the SendFeedback.  This method is invoked by the SendFeedbackCommand.
   '   ''' </summary>
   '   Public Sub SendFeedback(ByVal param As Object)
   '      ' Recupero indirizzo a cui spedire la mail
   '      Dim sSupportAddress As String = String.Empty
   '      GetPrivateProfileString(S_GENERAL, K_SUPPORT, "support@egaltech.com", sSupportAddress)
   '      ' se vuoto do messaggio di errore ed esco
   '      If String.IsNullOrWhiteSpace(sSupportAddress) Then
   '         MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
   '         Return
   '      End If
   '      ' Recupero numero chiave
   '      Dim sKey As String = String.Empty
   '      EgtGetKeyInfo(sKey)
   '      ' Recupero file del progetto corrente
   '      Dim sCurrProject As String = String.Empty
   '      EgtGetCurrFilePath(sCurrProject)
   '      ' se nome file vuoto, chiedo se si vuole salvare
   '      If String.IsNullOrWhiteSpace(sCurrProject) Then
   '         If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
   '            Application.Msn.NotifyColleagues(Application.SAVEPROJECT)
   '         End If
   '         EgtGetCurrFilePath(sCurrProject)
   '         ' se modificato, chiedo se si vuole salvare
   '      Else
   '         If EgtGetModified() Then
   '            If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
   '               Application.Msn.NotifyColleagues(Application.SAVEPROJECT)
   '            End If
   '         End If
   '      End If
   '      ' Verifico se il progetto corrente è una porta
   '      Dim nPartId As Integer = EgtGetFirstPart()
   '      If nPartId = GDB_ID.NULL Then
   '         nPartId = EgtGetFirstPartInRawPart(EgtGetFirstRawPart())
   '      End If
   '      Dim sPartName As String = String.Empty
   '      EgtGetName(nPartId, sPartName)
   '      Dim bPrjIsDoor As Boolean = (String.Compare(sPartName, "DOOR") = 0)
   '      ' Recupero macchine dei gruppi di lavoro del progetto
   '      Dim Machines As New List(Of String)
   '      Dim nMchGrpId As Integer = EgtGetFirstMachGroup()
   '      While nMchGrpId <> GDB_ID.NULL
   '         Dim sMachineName As String = String.Empty
   '         EgtGetMachGroupMachineName(nMchGrpId, sMachineName)
   '         If Not String.IsNullOrWhiteSpace(sMachineName) Then
   '            Machines.Add(sMachineName)
   '         End If
   '         nMchGrpId = EgtGetNextMachGroup(nMchGrpId)
   '      End While
   '      ' Recupero altri file con lo stesso nome del progetto
   '      Dim OtherFiles As New List(Of String)
   '      If Not String.IsNullOrWhiteSpace(sCurrProject) Then
   '         Dim sCurrProjectDir As String = Path.GetDirectoryName(sCurrProject)
   '         If Not String.IsNullOrWhiteSpace(sCurrProjectDir) Then
   '            Dim TempFiles() As String = Directory.GetFiles(sCurrProjectDir)
   '            For FileIndex = 0 To TempFiles.Count - 1
   '               If Path.GetFileNameWithoutExtension(TempFiles(FileIndex)).Contains(Path.GetFileNameWithoutExtension(sCurrProject)) AndAlso TempFiles(FileIndex) <> sCurrProject Then
   '                  OtherFiles.Add(TempFiles(FileIndex))
   '               End If
   '            Next
   '         End If
   '      End If
   '      ' Creo zip file da allegare
   '      Dim sZipToCreate As String = IniFile.m_sTempDir & "\Feedback.zip"
   '      If File.Exists(sZipToCreate) Then
   '         File.Delete(sZipToCreate)
   '      End If
   '      Try
   '         Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
   '            ' aggiungo file macchine
   '            For Each sMachineName As String In Machines
   '               Dim sMachineDir As String = IniFile.m_sMachinesRoot & "\" & sMachineName
   '               If Directory.Exists(sMachineDir) Then
   '                  zip.AddItem(sMachineDir, sMachineName)
   '               End If
   '            Next
   '            ' aggiungo progetto corrente
   '            If Not String.IsNullOrWhiteSpace(sCurrProject) Then
   '               zip.AddItem(sCurrProject, "")
   '            End If
   '            ' aggiungo file log
   '            zip.AddItem(IniFile.m_sLogFile, "")
   '            ' aggiungo file ausiliari
   '            For Each sOther As String In OtherFiles
   '               zip.AddItem(sOther, "")
   '            Next
   '            ' se door attivo, progetto corrente è una porta e definito direttorio base di Doors
   '            If IniFile.IsActiveDoors And bPrjIsDoor And Directory.Exists(IniFile.m_sDoorsDirPath) Then
   '               ' aggiungo Doors completo
   '               zip.AddItem(IniFile.m_sDoorsDirPath, "Doors")
   '            End If
   '            ' salvo lo zip
   '            zip.Save()
   '         End Using
   '      Catch ex1 As Exception
   '         EgtOutLog("Exception in zip: " & ex1.ToString())
   '      End Try
   '      ' preparo la mail per il supporto
   '      Dim bEx As Boolean = False
   '      Try
   '         Dim SendFeedbackWindow As New EgtWPFLib5.MapiMailMessage("EgtCAM5 Feedback - " & sKey)
   '         SendFeedbackWindow.Recipients.Add(sSupportAddress)
   '         If Not String.IsNullOrWhiteSpace(sZipToCreate) AndAlso File.Exists(sZipToCreate) Then
   '            SendFeedbackWindow.Files.Add(IniFile.m_sTempDir & "\Feedback.zip")
   '         End If
   '         SendFeedbackWindow.ShowDialog()
   '      Catch ex As Exception
   '         EgtOutLog("Feedback exception: " & ex.ToString)
   '         bEx = True
   '      End Try
   '      If bEx OrElse EgtWPFLib5.MapiMailMessage.m_ErrorCode <> 0 Then
   '         MessageBox.Show(String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK, MessageBoxImage.Information)
   '      Else
   '         Application.Msn.NotifyColleagues(Application.NOTIFYSTATUSOUTPUT, EgtMsg(MSG_TOPCOMMANDBAR + 14))
   '      End If
   '   End Sub

   '#End Region ' SendFeedbackCommand

#End Region    ' Commands

End Class