Imports System.Collections.ObjectModel
Imports System.IO
Imports EgtUILib
Imports EgtWPFLib5

Public Class MyMachGroupPanelVM
   Inherits MachGroupPanelVM

#Region "CONSTRUCTOR"

   Sub New()
      MyBase.New()
      ' Recupero la macchina di default
      Dim sDefaultMachine As String = String.Empty
      GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
      ' Creo riferimento a questa classe in OmagOFFICEMap
      OmagOFFICEMap.SetRefMachGroupPanelVM(Me)
      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(),
                     sDefaultMachine, BASE_MACH_GROUP & "1")
   End Sub

#End Region    ' CONSTRUCTOR

#Region "METHODS"

   Public Overrides Sub AddMachGroup()
      If NewMachGroup() Then
         ' creo oggetto gruppo creato
         Dim nNewMachGroupID As Integer = EgtGetCurrMachGroup()
         Dim sNewMachGroupName As String = String.Empty
         Dim sNewMachGroupMachineName As String = String.Empty
         EgtGetMachGroupName(EgtGetCurrMachGroup(), sNewMachGroupName)
         EgtGetMachGroupMachineName(nNewMachGroupID, sNewMachGroupMachineName)
         Dim MyMachGroup As MyMachGroup = New MyMachGroup(EgtGetCurrMachGroup, sNewMachGroupName, sNewMachGroupMachineName, EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers"))
         ' lo aggiungo alla lista
         MachGroupList.Add(MyMachGroup)
         ' e lo seleziono
         SelectedMachGroup = MyMachGroup
         EgtZoom(ZM.ALL)
      End If
   End Sub

   Public Overrides Sub LoadMachGroupList()
      ' Carico i gruppi di lavorazione nella lista
      Dim nId = EgtGetFirstMachGroup()
      While nId <> GDB_ID.NULL
         Dim sName As String = String.Empty
         Dim sMachine As String = String.Empty
         EgtGetMachGroupName(nId, sName)
         EgtGetMachGroupMachineName(nId, sMachine)
         MachGroupList.Add(New MyMachGroup(nId, sName, sMachine, EgtGetFirstNameInGroup(nId, "Opers")))
         nId = EgtGetNextMachGroup(nId)
      End While
   End Sub

   Public Overrides Function OnPreNewMachGroup() As Boolean
      EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
      Return True
   End Function

   ' NB: Anche se ho già aggiunto il nuovo gruppo di lavorazione, non l'ho ancora reso corrente (viene fatto dopo), quindi
   ' non posso usare CurrentMachine perchè è ancora impostata quella precedente!!!
   Public Overrides Function OnPostNewMachGroup() As Boolean
      ' Salvo macchina del gruppo come nuovo default
      Dim sCurrMachName As String = String.Empty
      EgtGetCurrMachineName(sCurrMachName)
      WriteMainPrivateProfileString(S_MACH, K_CURRMACH, sCurrMachName)
      ' Ricarico la macchina corrente
      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sCurrMachName,
                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PROCUCTION_LINE),
                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL), True)
      ' Se macchina con più tavole, chiedo quale usare
      Dim nTabInd As Integer = 1
      Dim nTabCnt As Integer = CamAuto.GetTableCount()
      If nTabCnt > 1 And nTabCnt <= 3 Then
         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(nTabCnt))
         dlg.ShowDialog()
         nTabInd = dlg.m_SelTable
      End If
      EgtSetTable(GetTableName(nTabInd))
      ' leggo nome attrezzaggio di default
      Dim sDefaultSetUpName As String = String.Empty
      Dim sMachineIniPath As String = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot & "\" & sCurrMachName & "\" & sCurrMachName & ".ini"
      EgtUILib.GetPrivateProfileString(S_SETUP, K_DEFAULT, "", sDefaultSetUpName, sMachineIniPath)
      ' se è attiva l'opzione, rendo corrente l'attrezzaggio di default
      If Not String.IsNullOrEmpty(sDefaultSetUpName) Then
         If Not EgtImportSetup(sDefaultSetUpName) Then
            EgtOutLog("Error loading default setup " & sDefaultSetUpName)
            MessageBox.Show(EgtMsg(MSG_SETUPERRORS + 9) & " " & sDefaultSetUpName, MessageBoxButton.OK, MessageBoxImage.Exclamation)
         End If
      End If
      ' Aggiungo eventuale sovratavola
      EstCalc.AddAdditionalTable()
      ' Aggiorno grezzo iniziale
      EstCalc.UpdateRawPart()
      ' Imposto materiale corrente
      EstCalc.SetMaterialName()
      ' Imposto flag tagli ridotti
      EstCalc.SetReducedCut(CurrentMachine.bReducedCut)
      ' Imposto flag tastatura su tagli inclinati
      EstCalc.SetSideAngCutProbeFlag( CurrentMachine.nSacProbe > 0)
      ' Imposto flag lavaggio
      EstCalc.SetWashingFlag(CurrentMachine.nWashing <> 0)
      Return True
   End Function

   Public Overrides Function OnPreSetCurrMachGroup() As Boolean
      EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
      ' Deseleziono tutto in Nesting e nel VeinMatching
      OmagOFFICE.refNestingTabVM.DeselectAllParts(True)
      Return True
   End Function

   Public Overrides Function OnPostSetCurrMachGroup() As Boolean
      ' Imposto vista solo tavola
      EgtSetMachineLook(MCH_LOOK.TAB)
      ' Ricarico la macchina corrente
      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, SelectedMachGroup.Machine,
                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PROCUCTION_LINE),
                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL), True)
      ' Imposto tab Disposizione
      OmagOFFICEMap.refOptionPanelVM.SelItem = OptionPanelVM.Tabs.NESTING
      ' Aggiorno grezzo iniziale
      EstCalc.UpdateRawPart()
      ' Aggiorno materiale corrente
      CurrentMachine.SetCurrMatByName(EstCalc.GetMaterialName())
      ' Aggiorno flag tagli ridotti
      CurrentMachine.bReducedCut = EstCalc.GetReducedCut()
      ' Aggiorno stato flag tastatura tagli inclinati
      if CurrentMachine.nSacProbe >= 0 Then CurrentMachine.nSacProbe = If( EstCalc.GetSideAngCutProbeFlag(), 1, 0)
      ' Aggiorno flag lavaggio
      if CurrentMachine.nWashing >= 0 Then CurrentMachine.nWashing = If( EstCalc.GetWashingFlag(), 1, 0)
      ' Verifico compatibilità lavorazioni, setup, materiale e spessore grezzo
      If Not SetUpUtility.IsValidToolHeadExitInSetUp() Then
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = Brushes.Red
      Else
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = OmagOFFICEDictionary.Button_Static_Background
      End If
      ' Verifico che gli utensili delle lavorazioni correnti siano attrezzati (necessario perchè potrei aver cambiato gli utensili delle lavorazioni)
      ' e che le lavorazioni correnti siano compatibili con materiale e spessore
      ' Lama
      Dim bOkCurrSawing As Boolean = True
      Dim bOkSetUp As Boolean = True
      Dim bOkMatThick As Boolean = True
      Dim sTUUID As String = String.Empty
      If Not String.IsNullOrWhiteSpace(CurrentMachine.sCurrSawing) Then
         EgtMdbSetCurrMachining(CurrentMachine.sCurrSawing)
         EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTUUID)
         bOkSetUp = bOkSetUp And SetUpUtility.IsToolInSetUp(sTUUID)
         bOkMatThick = bOkMatThick And CurrMachWindowVM.VerifyMatThickCompatibility()
      Else
         bOkCurrSawing = False
      End If
      ' Fresa
      If Not String.IsNullOrWhiteSpace(CurrentMachine.sCurrMilling) Then
         EgtMdbSetCurrMachining(CurrentMachine.sCurrMilling)
         sTUUID = String.Empty
         EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTUUID)
         bOkSetUp = bOkSetUp And SetUpUtility.IsToolInSetUp(sTUUID)
         bOkMatThick = bOkMatThick And CurrMachWindowVM.VerifyMatThickCompatibility()
      End If
      ' Foretto
      If Not String.IsNullOrWhiteSpace(CurrentMachine.sCurrDrilling) Then
         EgtMdbSetCurrMachining(CurrentMachine.sCurrDrilling)
         sTUUID = String.Empty
         EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTUUID)
         bOkSetUp = bOkSetUp And SetUpUtility.IsToolInSetUp(sTUUID)
         bOkMatThick = bOkMatThick And CurrMachWindowVM.VerifyMatThickCompatibility()
      End If

      If Not bOkSetUp Then
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = Brushes.Red
      Else
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = New BrushConverter().ConvertFrom("#FFDDDDDD")
      End If
      If Not bOkMatThick Or Not bOkCurrSawing Then
         OmagOFFICEMap.refOptionPanelVM.RawPart_Background = Brushes.Red
         OmagOFFICEMap.refRawPartTabVM.CurrMach_Background = Brushes.Red
      Else
         OmagOFFICEMap.refOptionPanelVM.RawPart_Background = OmagOFFICEDictionary.TabControl_Header_Background
         OmagOFFICEMap.refRawPartTabVM.CurrMach_Background = New BrushConverter().ConvertFrom("#FFDDDDDD")
      End If

      ' Se non esiste il grezzo vado subito alla sua definizione
      If EstCalc.GetRawId() = GDB_ID.NULL Then
         OmagOFFICEMap.refOptionPanelVM.SelItem = OptionPanelVM.Tabs.RAWPART
      End If

      Return True
   End Function

   Public Overrides Function OnPreRemoveCurrMachGroup() As Boolean
      EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
      ' Parcheggio tutti i pezzi presenti nella lastra
      Dim nPartId As Integer = EgtGetFirstPartInRawPart(GetRawId())
      While nPartId <> GDB_ID.NULL
         ' Recupero identificativo del successivo
         Dim nNextPartId As Integer = EgtGetNextPartInRawPart(nPartId)
         ' Metto in parcheggio
         EstCalc.StoreOnePart(nPartId)
         ' Eventuale notifica al VeinMatching
         VeinMatching.OnRemovePartFromRaw(nPartId)
         ' Passo al successivo
         nPartId = nNextPartId
      End While
      ' Elimino eventuale fotografia e contorno associati
      Dim nPhoto As Integer = EstPhoto.GetPhoto()
      EgtErase(nPhoto)
      Dim nContour As Integer = EstPhoto.GetContour()
      EgtErase(nContour)
      ' Elimino eventuale fotografia del VeinMatching associata
      VeinMatching.RemoveUnusedPhotos()
      Return True
   End Function

#End Region    ' METHODS

End Class

Public Class MyMachGroup
   Inherits MachGroup

   Private m_nOpersGroupId As Integer = 0
   Public ReadOnly Property nOpersGroupId As Integer
      Get
         Return m_nOpersGroupId
      End Get
   End Property

#Region "ToolTip"

   Public Overrides ReadOnly Property MachGroupToolTip As String
      Get
         Dim sSlabName As String = String.Empty
         If Not EgtGetInfo(Id, INFO_SLABNAME, sSlabName) Then sSlabName = "---"
         Dim sMaterial As String = String.Empty
         If Not EgtGetInfo(Id, INFO_PROJMAT, sMaterial) Then sMaterial = "---"
         Dim dSlabHeight As Double = 0
         If Not EgtGetInfo(Id, INFO_SLABHEIGHT, dSlabHeight) Then dSlabHeight = 0
         Dim sCurrSawing As String = String.Empty
         If Not EgtGetInfo(m_nOpersGroupId, INFO_CURRSAWING, sCurrSawing) Then sCurrSawing = "---"
         Return "Name: " & sSlabName & Environment.NewLine &
                "Material: " & sMaterial & Environment.NewLine &
                "Thickness: " & LenToString(dSlabHeight, 3) & Environment.NewLine &
                "Sawing: " & sCurrSawing & Environment.NewLine &
                "Machine: " & Machine
      End Get
   End Property

#End Region    ' ToolTip

   Sub New(nId As Integer, sName As String, sMachine As String, nOpersGroupId As Integer)
      MyBase.New(nId, sName, sMachine)
      m_nOpersGroupId = nOpersGroupId
   End Sub

End Class